1296 lines
45 KiB
Plaintext
1296 lines
45 KiB
Plaintext
|
|
-- ============================================================================
|
|
-- AT-SYSINFO.MIB, Allied Telesis enterprise MIB:
|
|
-- Objects for system information
|
|
-- Copyright (c) 2006 by Allied Telesis, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- ============================================================================
|
|
|
|
AT-SYSINFO-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
atRouter, DisplayStringUnsized
|
|
FROM AT-SMI-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
sysinfo MODULE-IDENTITY
|
|
LAST-UPDATED "202003050000Z"
|
|
ORGANIZATION
|
|
"Allied Telesis, Inc."
|
|
CONTACT-INFO
|
|
" http://www.alliedtelesis.com"
|
|
DESCRIPTION
|
|
"Subtree beneath which system inforamtion ids are assigned.
|
|
It contains generic system information, as follows:
|
|
{ sysinfo 1 } fanAndPs
|
|
{ sysinfo 2 } restartGroup
|
|
{ sysinfo 3 } cpu
|
|
{ sysinfo 4 } sysTemperature
|
|
{ sysinfo 5 } atrContactDetails
|
|
{ sysinfo 6 } bbrNvs
|
|
{ sysinfo 9 } hostId
|
|
{ sysinfo 10 } envMon
|
|
{ sysinfo 11 } xem
|
|
{ sysinfo 12 } awpEnvMon
|
|
{ sysinfo 13 } awpStack
|
|
{ sysinfo 14 } atPortInfo"
|
|
|
|
REVISION "202003050000Z"
|
|
DESCRIPTION
|
|
"Added SP10TM to atPortInfoTransceiverType"
|
|
REVISION "201804230000Z"
|
|
DESCRIPTION
|
|
"Added QSFP28-LR and QSFP-SWDM to atPortInfoTransceiverType"
|
|
REVISION "201803120000Z"
|
|
DESCRIPTION
|
|
"Added QSFP28-CR to atPortInfoTransceiverEntry"
|
|
REVISION "201612140000Z"
|
|
DESCRIPTION
|
|
"Added QSFP28-SR to atPortInfoTransceiverEntry"
|
|
REVISION "201612120000Z"
|
|
DESCRIPTION
|
|
"Added 10GBASE-ZR SFP+ to atPortInfoTransceiverEntry"
|
|
REVISION "201605050000Z"
|
|
DESCRIPTION
|
|
"Added 40GBASE-ER4 and 10GBBASE-T SFP+ to atPortInfoTransceiverEntry"
|
|
REVISION "201503160000Z"
|
|
DESCRIPTION
|
|
"Added 40GBASE-SR4 and 40GBASE-LR4 to atPortInfoTransceiverEntry"
|
|
REVISION "201406090000Z"
|
|
DESCRIPTION
|
|
"Added 4 x Cu Passive QSFP description to atPortInfoTransceiverEntry."
|
|
REVISION "201404300000Z"
|
|
DESCRIPTION
|
|
"Updated decriptions to refer to chassisMappingTable"
|
|
REVISION "201404160000Z"
|
|
DESCRIPTION
|
|
"Added more descriptions to cpuUtilisationStackId for VCStack Plus"
|
|
REVISION "201209210000Z"
|
|
DESCRIPTION
|
|
"Added chassis switch (e.g. SBx8100) descriptions to stack-related MIB objects"
|
|
REVISION "201103140000Z"
|
|
DESCRIPTION
|
|
"Added CX4 description to atPortInfoTransceiverEntry."
|
|
REVISION "201009180000Z"
|
|
DESCRIPTION
|
|
"Updated CPU Utilization to be per stack member."
|
|
REVISION "201009070000Z"
|
|
DESCRIPTION
|
|
"Generic syntax tidy up"
|
|
REVISION "201008310031Z"
|
|
DESCRIPTION
|
|
"Added Infinband descriptions to atPortInfoTransceiverEntry."
|
|
REVISION "201008160016Z"
|
|
DESCRIPTION
|
|
"Added SFP Plus descriptions to atPortInfoTransceiverEntry."
|
|
REVISION "201006150015Z"
|
|
DESCRIPTION
|
|
"MIB revision history dates in descriptions updated."
|
|
REVISION "201006040000Z"
|
|
DESCRIPTION
|
|
"Added new object atPortRenumberEvents."
|
|
REVISION "200802260000Z"
|
|
DESCRIPTION
|
|
"Changed top DESCRIPTION section."
|
|
REVISION "200606140000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { atRouter 3 }
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- fanAndPs traps - traps exist for changes to power supply status, fan status
|
|
-- and temperature status.
|
|
|
|
fanAndPs OBJECT IDENTIFIER ::= { sysinfo 1 }
|
|
|
|
|
|
fanAndPsTrap OBJECT IDENTIFIER ::= { fanAndPs 0 }
|
|
|
|
|
|
fanAndPsRpsConnectionTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsRpsConnectionStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the RPS connection status changes."
|
|
::= { fanAndPsTrap 1 }
|
|
|
|
|
|
fanAndPsMainPSUStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsMainPSUStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the main power supply status changes."
|
|
::= { fanAndPsTrap 2 }
|
|
|
|
|
|
fanAndPsRedundantPSUStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsRedundantPSUStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the RPS status changes."
|
|
::= { fanAndPsTrap 3 }
|
|
|
|
|
|
fanAndPsMainFanStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsMainFanStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the main fan changes status."
|
|
::= { fanAndPsTrap 4 }
|
|
|
|
|
|
fanAndPsRedundantFanStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsRedundantFanStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the redundant fan changes status."
|
|
::= { fanAndPsTrap 5 }
|
|
|
|
|
|
fanAndPsTemperatureStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsTemperatureStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the temperature changes status."
|
|
::= { fanAndPsTrap 6 }
|
|
|
|
|
|
fanAndPsFanTrayPresentTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsFanTrayPresent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the fan tray presence status changes."
|
|
::= { fanAndPsTrap 7 }
|
|
|
|
|
|
fanAndPsFanTrayStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsFanTrayStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the fan tray status changes."
|
|
::= { fanAndPsTrap 8 }
|
|
|
|
|
|
fanAndPsMainMonitoringStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsMainMonitoringStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the main power supply monitoring status changes."
|
|
::= { fanAndPsTrap 9 }
|
|
|
|
|
|
fanAndPsAccelFanStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { fanAndPsAccelFanStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the accelerator fans' status changes."
|
|
::= { fanAndPsTrap 10 }
|
|
|
|
|
|
fanAndPsRpsConnectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
connected(1),
|
|
notConnected(2),
|
|
notMonitoring(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the Redundant Power Supply (RPS) connection,
|
|
ie, whether an RPS is actually connected or not, regardless
|
|
of whether the RPS is on or not. notSupported means that an
|
|
RPS is not supported in this hardware platform, connected
|
|
means that the RPS is connected, notConnected means that the
|
|
RPS is not connected, and notMonitoring means that the status
|
|
of the RPS is not being monitored presently. RPS monitoring can
|
|
be turned on via the variable fanAndPsRpsMonitoringStatus, or
|
|
by the command SET SYSTEM RPSMONITOR=ON."
|
|
::= { fanAndPs 1 }
|
|
|
|
|
|
fanAndPsMainPSUStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2),
|
|
faulty(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the main Power Supply. on means that the power supply is present
|
|
and fully operational. off means that the power supply is totally off (and
|
|
obviously only applies to systems with a redundant power supply). faulty means
|
|
that the main power supply is delivering power but that a component of the
|
|
power supply is faulty. This applies to systems like SwitchBlade which have 3
|
|
power supplies but do not provide individual power supply monitoring. Also,
|
|
in the case of SwitchBlade, power supply status includes the status of the fans
|
|
in the power supply."
|
|
::= { fanAndPs 2 }
|
|
|
|
|
|
fanAndPsRedundantPSUStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
on(1),
|
|
off(2),
|
|
notMonitoring(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the redundant Power Supply. notSupported means
|
|
this device does not support redundant power supplies, on
|
|
means that the redundant power supply is connected and able
|
|
to supply system power if required, off means that the
|
|
redundant power supply is either not connected or is connected
|
|
and is not able to supply system power if required, and
|
|
notMonitoring means that the status of the RPS is not being
|
|
monitored presently. RPS monitoring can be turned on via the
|
|
variable fanAndPsRpsMonitoringStatus, or by the command
|
|
SET SYSTEM RPSMONITOR=ON."
|
|
::= { fanAndPs 3 }
|
|
|
|
|
|
fanAndPsRpsMonitoringStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of redundant power supply monitoring. The
|
|
monitoring of the redundant power supply and its fan must be
|
|
enabled by command or by setting this variable to on. The value
|
|
notSupported means that this device does not support redundant
|
|
power supplies. Only the values on or off may be written to this
|
|
variable. If this variables reads as notSupported, an attempt to
|
|
write to this variable will result in a bad value error."
|
|
::= { fanAndPs 4 }
|
|
|
|
|
|
fanAndPsMainFanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
ok(1),
|
|
notOk(2),
|
|
warning(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the main Power Supply fan. notSupported means that this
|
|
device does not support monitoring on the main power supply fan, or that
|
|
there is no main power supply fan. The warning means the fan's speed is
|
|
outside 30% of the expected speed."
|
|
::= { fanAndPs 5 }
|
|
|
|
|
|
fanAndPsRedundantFanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
ok(1),
|
|
notOk(2),
|
|
notMonitoring(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the redundant Power Supply Fan. notSupported means
|
|
this device does not support redundant power supplies, ok
|
|
means that the redundant power supply fan is running, notOk means
|
|
that the redundant power supply fan is not running, and
|
|
notMonitoring means that the status of the RPS is not being
|
|
monitored presently. RPS monitoring can be turned on via the
|
|
variable fanAndPsRpsMonitoringStatus, or by the command
|
|
SET SYSTEM RPSMONITOR=ON."
|
|
::= { fanAndPs 6 }
|
|
|
|
|
|
fanAndPsTemperatureStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ok(1),
|
|
notOk(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of temperature in this device. ok means that the
|
|
device is not capable of monitoring temperature or that the
|
|
temperature is OK, notOk means that the temperature is being
|
|
monitored and is currently out of the range 0C - 45C."
|
|
::= { fanAndPs 7 }
|
|
|
|
|
|
fanAndPsFanTrayPresent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
present(1),
|
|
notPresent(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the presence of the fan tray in this system. Systems
|
|
which do not support a fan tray return the value notSupported. Upon
|
|
removal of the fan tray there is a short period (20s) before the value of
|
|
this variable is changed to notPresent. This is to allow for scheduled
|
|
replacement and/or cleaning of the fan tray."
|
|
::= { fanAndPs 8 }
|
|
|
|
|
|
fanAndPsFanTrayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
ok(1),
|
|
notOk(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the fan tray in this system. Systems which do not support
|
|
a fan tray return the value notSupported. The value ok is returned if all fans
|
|
in the fan tray are running at full speed. The value notOk is returned if
|
|
one of more of the fan tray fans is running slow or has stalled."
|
|
::= { fanAndPs 9 }
|
|
|
|
|
|
fanAndPsMainMonitoringStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
ok(1),
|
|
notOk(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of main power supply monitoring. The
|
|
monitoring of the main power supply and its fan is always
|
|
enabled by those systems that support it. Systems which do
|
|
not support main power supply or fan monitoring report a
|
|
value of notSupported. The value ok is returned for those
|
|
systems that do support main power supply and fan monitoring,
|
|
and where the monitoring operation is reporting valid information (refer
|
|
to fanAndPsMainFanStatus for the current status of the system).
|
|
When main power supply and fan monitoring is failing, the value
|
|
notOk is returned."
|
|
::= { fanAndPs 10 }
|
|
|
|
-- fanAndPsPsuStatusTable - AT8948 specific power supply monitoring.
|
|
|
|
fanAndPsPsuStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FanAndPsPsuStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table
|
|
represents the status of one of the power supplies in AT8948 system.
|
|
Each power supply has its own board ID."
|
|
::= { fanAndPs 11 }
|
|
|
|
|
|
fanAndPsPsuStatusEntry OBJECT-TYPE
|
|
SYNTAX FanAndPsPsuStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry of AT8948 fanAndPsPsuStatusTable, indexed by
|
|
fanAndPsPsuNumber field."
|
|
INDEX { fanAndPsPsuNumber }
|
|
::= { fanAndPsPsuStatusTable 1 }
|
|
|
|
|
|
FanAndPsPsuStatusEntry ::=
|
|
SEQUENCE {
|
|
fanAndPsPsuNumber
|
|
INTEGER,
|
|
fanAndPsPsuPresent
|
|
INTEGER,
|
|
fanAndPsPsuType
|
|
INTEGER,
|
|
fanAndPsPsuFan
|
|
INTEGER,
|
|
fanAndPsPsuTemperature
|
|
INTEGER,
|
|
fanAndPsPsuPower
|
|
INTEGER
|
|
}
|
|
|
|
fanAndPsPsuNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSU board identity for which this entry holds. If the system
|
|
consists only of a single PSU board, only one entry will appear
|
|
in the table, whose index is 1."
|
|
::= { fanAndPsPsuStatusEntry 1 }
|
|
|
|
|
|
fanAndPsPsuPresent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
yes(0),
|
|
no(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSU present state, displayed as 'yes' if present, or 'no' if absent."
|
|
::= { fanAndPsPsuStatusEntry 2 }
|
|
|
|
|
|
fanAndPsPsuType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ac(0),
|
|
dc(1),
|
|
fan(2),
|
|
notPresent(3),
|
|
notSupported(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT."
|
|
::= { fanAndPsPsuStatusEntry 3 }
|
|
|
|
|
|
fanAndPsPsuFan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ok(0),
|
|
fail(1),
|
|
notPresent(2),
|
|
notSupported(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT."
|
|
::= { fanAndPsPsuStatusEntry 4 }
|
|
|
|
|
|
fanAndPsPsuTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
good(0),
|
|
high(1),
|
|
notPresent(2),
|
|
notSupported(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT,
|
|
or NOT SUPPORTED."
|
|
::= { fanAndPsPsuStatusEntry 5 }
|
|
|
|
|
|
fanAndPsPsuPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
good(0),
|
|
bad(1),
|
|
notPresent(2),
|
|
notSupported(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT
|
|
or NOT SUPPORTED."
|
|
::= { fanAndPsPsuStatusEntry 6 }
|
|
|
|
|
|
fanAndPsAccelFanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
ok(1),
|
|
notOk(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the accelerator card fans. Non-supported means this
|
|
device does not support monitoring of the accelerator card fans."
|
|
::= { fanAndPs 12 }
|
|
|
|
|
|
restartGroup OBJECT IDENTIFIER ::= { sysinfo 2 }
|
|
|
|
|
|
restart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
restartNone(0),
|
|
restartWarm(1),
|
|
restartCold(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A router/switch restart request.
|
|
|
|
A management station can remotely instruct an ATI router/switch
|
|
to action a warm or cold restart.
|
|
|
|
Once all the appropriate internal checks have been made, the
|
|
router/switch will acknowledge the request via normal SNMP channels.
|
|
The restart instruction will be actioned after waiting for a period
|
|
of 5 seconds, this is because the SNMP acknowledgement packet needs
|
|
time to reach the management station.
|
|
|
|
Once the request has been actioned, it can not be cancelled and
|
|
communication with the router/switch will be lost during system
|
|
initialisation."
|
|
::= { restartGroup 1 }
|
|
|
|
|
|
restartCause OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
hardwareReset(1),
|
|
hardwareWatchdog(2),
|
|
softwareRequest(3),
|
|
softwareException(4),
|
|
softwareInvalidImage(5),
|
|
softwareLicenceCheckFailure(6),
|
|
powerOnSelfTestfailure(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for last time restart."
|
|
::= { restartGroup 2 }
|
|
|
|
|
|
restartLog OBJECT-TYPE
|
|
SYNTAX DisplayStringUnsized (SIZE (0..500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The restart logging details."
|
|
::= { restartGroup 3 }
|
|
|
|
|
|
restartNotification NOTIFICATION-TYPE
|
|
OBJECTS { restartCause }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A restart notification is a trap sent to tell snmp managers
|
|
the reason of restarting"
|
|
::= { restartGroup 11 }
|
|
|
|
|
|
-- cpu - this group contains information about the cpu utilisation over different
|
|
-- periods of time.
|
|
cpu OBJECT IDENTIFIER ::= { sysinfo 3 }
|
|
|
|
|
|
cpuUtilisationMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum CPU utilisation since the router was last restarted.
|
|
Expressed as a percentage."
|
|
::= { cpu 1 }
|
|
|
|
|
|
cpuUtilisationAvg OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation since the router was last restarted.
|
|
Expressed as a percentage."
|
|
::= { cpu 2 }
|
|
|
|
|
|
cpuUtilisationAvgLastMinute OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past minute.
|
|
Expressed as a percentage."
|
|
::= { cpu 3 }
|
|
|
|
|
|
cpuUtilisationAvgLast10Seconds OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past ten seconds.
|
|
Expressed as a percentage."
|
|
::= { cpu 4 }
|
|
|
|
|
|
cpuUtilisationAvgLastSecond OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past second.
|
|
Expressed as a percentage."
|
|
::= { cpu 5 }
|
|
|
|
|
|
cpuUtilisationMaxLast5Minutes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum CPU utilisation over the last 5 minutes.
|
|
Expressed as a percentage."
|
|
::= { cpu 6 }
|
|
|
|
|
|
cpuUtilisationAvgLast5Minutes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past 5 minutes.
|
|
Expressed as a percentage."
|
|
::= { cpu 7 }
|
|
|
|
cpuUtilisationStackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpuUtilisationStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of stack members. For a chassis switch, this is a list
|
|
of cards."
|
|
::= { cpu 8 }
|
|
|
|
cpuUtilisationStackEntry OBJECT-TYPE
|
|
SYNTAX CpuUtilisationStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of parameters that describe the CPU utilisation of a
|
|
stack member. For a chassis switch, it corresponds to the CPU
|
|
utilisation of a card."
|
|
INDEX { cpuUtilisationStackId }
|
|
::= { cpuUtilisationStackTable 1 }
|
|
|
|
CpuUtilisationStackEntry ::= SEQUENCE {
|
|
cpuUtilisationStackId
|
|
Unsigned32,
|
|
cpuUtilisationStackMax
|
|
INTEGER,
|
|
cpuUtilisationStackAvg
|
|
INTEGER,
|
|
cpuUtilisationStackAvgLastMinute
|
|
INTEGER,
|
|
cpuUtilisationStackAvgLast10Seconds
|
|
INTEGER,
|
|
cpuUtilisationStackAvgLastSecond
|
|
INTEGER,
|
|
cpuUtilisationStackMaxLast5Minutes
|
|
INTEGER,
|
|
cpuUtilisationStackAvgLast5Minutes
|
|
INTEGER
|
|
}
|
|
|
|
cpuUtilisationStackId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stack member ID. For a chassis switch, it corresponds to the
|
|
card ID. For VCStack Plus, 1-12 refers to the cards on VCS stack
|
|
member 1 and 13-24 refers to the cards on VCS stack member 2.
|
|
Refer to chassisMappingTable for more details."
|
|
::= { cpuUtilisationStackEntry 1 }
|
|
|
|
cpuUtilisationStackMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum CPU utilisation since the router was last restarted.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 2 }
|
|
|
|
cpuUtilisationStackAvg OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation since the router was last restarted.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 3 }
|
|
|
|
cpuUtilisationStackAvgLastMinute OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past minute.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 4 }
|
|
|
|
cpuUtilisationStackAvgLast10Seconds OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past ten seconds.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 5 }
|
|
|
|
cpuUtilisationStackAvgLastSecond OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past second.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 6 }
|
|
|
|
cpuUtilisationStackMaxLast5Minutes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum CPU utilisation over the last 5 minutes.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 7 }
|
|
|
|
cpuUtilisationStackAvgLast5Minutes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average CPU utilisation over the past 5 minutes.
|
|
Expressed as a percentage."
|
|
::= { cpuUtilisationStackEntry 8 }
|
|
|
|
|
|
|
|
|
|
-- sysTemperature - this group contains information about the temperature monitoring
|
|
-- in the system. under this group is a general group, containing generic temperature
|
|
-- monitoring variables, and one or more specific groups, which contain variables specific
|
|
-- to particular products.
|
|
|
|
sysTemperature OBJECT IDENTIFIER ::= { sysinfo 4 }
|
|
|
|
-- This group displays generic system temperature information - the actual
|
|
-- temperature, the fixed temperature threshold and an indication the
|
|
-- temperature has fallen below the threshold. A particular product may support
|
|
-- this information or not. If not the product may have a specific entry for
|
|
-- its particular temperature information. A product may also support the
|
|
-- generic information and additional specific information.
|
|
|
|
generalTemperature OBJECT IDENTIFIER ::= { sysTemperature 1 }
|
|
|
|
|
|
generalTemperatureTrap OBJECT IDENTIFIER ::= { generalTemperature 0 }
|
|
|
|
-- generalTemperature trap - a trap monitoring changes in the temperature status.
|
|
|
|
generalTemperatureStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { generalTemperatureStatus, generalTemperatureActualTemp, generalTemperatureThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the temperature status of the device changes."
|
|
::= { generalTemperatureTrap 1 }
|
|
|
|
|
|
generalTemperatureSupported OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
supported(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value supported indicates general temperature is displayed by the
|
|
device. The value notSupported indicates the device displays specific
|
|
temperature information or none at all."
|
|
::= { generalTemperature 1 }
|
|
|
|
|
|
generalTemperatureActualTemp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current temperature of product's base board, in degrees Celsius. A device
|
|
which doesn't support this group will return the value 0 for this variable."
|
|
::= { generalTemperature 2 }
|
|
|
|
|
|
generalTemperatureStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ok(1),
|
|
notOk(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of temperature in this device. ok indicates the
|
|
temperature is below the threshold temperature or the device
|
|
is not capable of monitoring temperature. notOk indicates the
|
|
temperature is being monitored and is currently above the
|
|
threshold temperature (displayed in generalTemperatureThreshold)."
|
|
::= { generalTemperature 3 }
|
|
|
|
|
|
generalTemperatureThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature threshold for the device. If the
|
|
temperature of the device rises above this threshold
|
|
generalTemeratureStatus will indicate a notOk status."
|
|
::= { generalTemperature 4 }
|
|
|
|
|
|
-- sbTemperature - SwitchBlade specific temperature monitoring.
|
|
|
|
sbTemperature OBJECT IDENTIFIER ::= { sysTemperature 2 }
|
|
|
|
|
|
sbTemperatureTrap OBJECT IDENTIFIER ::= { sbTemperature 0 }
|
|
|
|
|
|
sbTempFixedThresholdTrap NOTIFICATION-TYPE
|
|
OBJECTS { sbTempFixedThresholdStatus, sbTempActualTemperature, sbTempFixedThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap occurs when fixed threshold status changes. The actual temperature
|
|
and the fixed threshold are also given."
|
|
::= { sbTemperatureTrap 1 }
|
|
|
|
|
|
sbTempSettableThresholdTrap NOTIFICATION-TYPE
|
|
OBJECTS { sbTempSettableThresholdStatus, sbTempActualTemperature, sbTempSettableThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap occurs when settable threshold status changes. The actual temperature
|
|
and the settable threshold are also given."
|
|
::= { sbTemperatureTrap 2 }
|
|
|
|
|
|
sbTempTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SbTempEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of SwitchBlade sysTemperature. Each entry in the table
|
|
represents temperature monitoring from one of the CPU cards which
|
|
may be present in the SwitchBlade system."
|
|
::= { sbTemperature 1 }
|
|
|
|
|
|
sbTempEntry OBJECT-TYPE
|
|
SYNTAX SbTempEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry of SwitchBlade sysTemperature"
|
|
INDEX { sbTempIndex }
|
|
::= { sbTempTable 1 }
|
|
|
|
|
|
SbTempEntry ::=
|
|
SEQUENCE {
|
|
sbTempIndex
|
|
INTEGER,
|
|
sbTempActualTemperature
|
|
INTEGER,
|
|
sbTempFixedThresholdStatus
|
|
INTEGER,
|
|
sbTempSettableThresholdStatus
|
|
INTEGER,
|
|
sbTempSettableThreshold
|
|
INTEGER
|
|
}
|
|
|
|
sbTempIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
master(1),
|
|
slave(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The board for which this temperature entry holds. If the system
|
|
consists only of a single CPU board, only one entry will appear
|
|
in the table, whose index is master(1)."
|
|
::= { sbTempEntry 1 }
|
|
|
|
|
|
sbTempActualTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual SwitchBlade temperature. This temperature is measured
|
|
within the SwitchBlade CPU, and is sampled at 1 second intervals."
|
|
::= { sbTempEntry 2 }
|
|
|
|
|
|
sbTempFixedThresholdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
crossover(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature status with regard to the fixed temperature
|
|
threshold. The value of the fixed temperature threshold is set at
|
|
90 degrees C. This variable represents whether the actual temperature
|
|
is above the threshold (value is crossover(2)) or below the threshold
|
|
(value is normal(1)). If the temperature is exactly the same as the
|
|
fixed temperature threshold, the value of this variable reads as
|
|
normal(1)."
|
|
::= { sbTempEntry 3 }
|
|
|
|
|
|
sbTempSettableThresholdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
crossover(2),
|
|
undefined(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature status with regard to the settable temperature
|
|
threshold. The value of the settable temperature threshold is set by
|
|
management intervention. This variable represents whether the actual
|
|
temperature is above the threshold (value is crossover(2)) or below
|
|
the threshold (value is normal(1)). When the value of this variable is
|
|
undefined(3), no settable threshold has been specified and the value
|
|
of sbTempSettableThreshold is not used."
|
|
::= { sbTempEntry 4 }
|
|
|
|
|
|
sbTempSettableThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (30..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the settable temperature threshold. This can be set
|
|
independently for each temperature entry. The value of this threshold
|
|
is only valid when sbTempSettableThresholdStatus is not set to
|
|
undefined(3)."
|
|
::= { sbTempEntry 5 }
|
|
|
|
|
|
sbTempFixedThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the fixed temperature threshold. This value is fixed for
|
|
both CPU cards, and cannot be set."
|
|
::= { sbTemperature 2 }
|
|
|
|
|
|
-- acceleratorTemperature - Accelerator card specific temperature monitoring.
|
|
|
|
acceleratorTemperature OBJECT IDENTIFIER ::= { sysTemperature 3 }
|
|
|
|
|
|
acceleratorTemperatureTrap OBJECT IDENTIFIER ::= { acceleratorTemperature 0 }
|
|
|
|
|
|
acceleratorTemperatureStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { acceleratorTemperatureStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when the temperature status of the device changes."
|
|
::= { acceleratorTemperatureTrap 1 }
|
|
|
|
|
|
acceleratorTemperatureSupported OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(0),
|
|
supported(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value supported indicates whether accelerator card temperature
|
|
is displayed by the device. The value notSupported indicates the
|
|
device does not display specific accelerator card temperature
|
|
information."
|
|
::= { acceleratorTemperature 1 }
|
|
|
|
|
|
acceleratorTemperatureActualTemp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current temperature of product's base board, in degrees Celsius. A device
|
|
which doesn't support this group will return the value 0 for this variable."
|
|
::= { acceleratorTemperature 2 }
|
|
|
|
|
|
acceleratorTemperatureStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ok(1),
|
|
notOk(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of temperature in this device. ok indicates the
|
|
temperature is below the threshold temperature or the device
|
|
is not capable of monitoring temperature. notOk indicates the
|
|
temperature is being monitored and is currently above the
|
|
threshold temperature (displayed in generalTemperatureThreshold)."
|
|
::= { acceleratorTemperature 3 }
|
|
|
|
|
|
acceleratorTemperatureThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature threshold for the device. If the
|
|
temperature of the device rises above this threshold
|
|
generalTemeratureStatus will indicate a notOk status."
|
|
::= { acceleratorTemperature 4 }
|
|
|
|
-- acceleratorTemperature trap - a trap monitoring changes in the temperature status.
|
|
|
|
atContactDetails OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contact details for Allied Telesis inc."
|
|
::= { sysinfo 5 }
|
|
|
|
-- bbrNvs - this group contains information about the battery backed RAM non-volatile storage
|
|
-- in the router.
|
|
|
|
bbrNvs OBJECT IDENTIFIER ::= { sysinfo 6 }
|
|
|
|
|
|
bbrNvsTrap OBJECT IDENTIFIER ::= { bbrNvs 0 }
|
|
|
|
|
|
bbrNvsReinitialiseTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated at boot when the device detects that the BBR has been
|
|
corrupted and reinitialised. This can happen if the device's BBR
|
|
battery has run down, and the device has been powered off, then on."
|
|
::= { bbrNvsTrap 1 }
|
|
|
|
|
|
-- memory - this group contains information about the current memory status
|
|
-- of the router.
|
|
memory OBJECT IDENTIFIER ::= { sysinfo 7 }
|
|
|
|
|
|
freeMemory OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Percentage of free memory still available on device"
|
|
::= { memory 1 }
|
|
|
|
|
|
totalBuffers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of buffers available on device"
|
|
::= { memory 2 }
|
|
|
|
|
|
lowMemoryTrap NOTIFICATION-TYPE
|
|
OBJECTS { freeMemory, totalBuffers }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low memory trap is generated when a router's memory
|
|
has gone below a certain level."
|
|
::= { memory 11 }
|
|
|
|
|
|
realTimeClockStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid(0),
|
|
normal(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the status of the real time clock"
|
|
::= { sysinfo 8 }
|
|
|
|
|
|
hostId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Host Identifier of this device"
|
|
::= { sysinfo 9 }
|
|
|
|
|
|
atPortInfo OBJECT IDENTIFIER ::= { sysinfo 14 }
|
|
|
|
|
|
atPortInfoTransceiverTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtPortInfoTransceiverEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of information about the transceiver of a interface."
|
|
::= { atPortInfo 1 }
|
|
|
|
|
|
atPortInfoTransceiverEntry OBJECT-TYPE
|
|
SYNTAX AtPortInfoTransceiverEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description, the transceiver type of a interface."
|
|
INDEX { atPortInfoTransceiverifIndex }
|
|
::= { atPortInfoTransceiverTable 1 }
|
|
|
|
|
|
AtPortInfoTransceiverEntry ::=
|
|
SEQUENCE {
|
|
atPortInfoTransceiverifIndex
|
|
InterfaceIndex,
|
|
atPortInfoTransceiverType
|
|
INTEGER
|
|
}
|
|
|
|
atPortInfoTransceiverifIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex for the interface represented
|
|
by this entry of the interfaces table."
|
|
::= { atPortInfoTransceiverEntry 1 }
|
|
|
|
|
|
atPortInfoTransceiverType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rj45(1),
|
|
sfp-px(2),
|
|
sfp-bx10(3),
|
|
sfp-fx(4),
|
|
sfp-100base-lx(5),
|
|
sfp-t(6),
|
|
sfp-cx(7),
|
|
sfp-zx-cwdm(8),
|
|
sfp-lx(9),
|
|
sfp-sx(10),
|
|
sfp-oc3-lr(11),
|
|
sfp-oc3-ir(12),
|
|
sfp-oc3-mm(13),
|
|
xfp-srsw(14),
|
|
xfp-lrlw(15),
|
|
xfp-erew(16),
|
|
xfp-sr(17),
|
|
xfp-lr(18),
|
|
xfp-er(19),
|
|
xfp-lrm(20),
|
|
xfp-sw(21),
|
|
xfp-lw(22),
|
|
xfp-ew(23),
|
|
unknown(24),
|
|
empty(25),
|
|
sfpp-sr(26),
|
|
sfpp-lr(27),
|
|
sfpp-er(28),
|
|
sfpp-lrm(29),
|
|
inf-1-x-copper-pasv(30),
|
|
inf-1-x-copper-actv(31),
|
|
inf-1-x-lx(32),
|
|
inf-1-x-sx(33),
|
|
cx4(34),
|
|
inf-4-x-copper-pasv(35),
|
|
qsfp-sr(36),
|
|
qsfp-lr(37),
|
|
qsfp-er(38),
|
|
sfpp-t(39),
|
|
sfpp-zr(40),
|
|
qsfp28-sr(41),
|
|
qsfp28-lr(42),
|
|
qsfp-swdm(43),
|
|
qsfp28-cr(44),
|
|
sfpp-tm(45)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of transceiver on a interface."
|
|
::= { atPortInfoTransceiverEntry 2 }
|
|
|
|
|
|
atPortRenumberEvents OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that port number values (represented by the
|
|
dot1dBasePort object in BRIDGE-MIB), have been re-assigned due to
|
|
stack member leave/join events or XEM hot-swap events, since the
|
|
system was initialised."
|
|
::= { atPortInfo 2 }
|
|
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- at-sysinfo.mib
|
|
--
|
|
|