mibs/MIBS/apc/PowerNet-MIB
2023-12-05 12:25:34 +01:00

86004 lines
2.7 MiB

-- *************************************************************************
-- AMERICAN POWER CONVERSION PowerNet-MIB
-- *************************************************************************
-- Copyright (c) 2020 American Power Conversion, Inc.
-- PowerNet is a Trademark of American Power Conversion Corp.
--
-- Title: APC TOP LEVEL PowerNet MIB
--
-- Version : 4.3.6
--
-- Generated by script: tomib.awk
--
-- Input File: powernetPS.mib
--
-- Created: Saturday, September, 19, 2020
--
-- Revision History:
-- *************************************************************************
-- - v3.2.0 Added functionality for MasterSwitch Plus
-- - v3.3.0 Added functionality for MX28B (dcDM3) and 3-phase UPS
-- - v3.3.2 New traps for Symmetra PX UPS
-- 07/15/01 - v3.4.0 Added transfer switch
-- - v3.4.3 Added functionality for External and Integrated Environmental Monitor
-- 06/14/02 - v3.4.4 Added dcmim2(Siemens) branch, Battery Manager(Reading) traps, and
-- Psx Traps for PDU and RM-PDU and Netlock branch/traps
-- 12/13/02 - v3.5.0 netlock - Initial support for netlock (nl). Traps 261-265 added.
-- rPDU - Initial support for rPDU. Traps 266-283 added.
-- rARU - Initial support for rARU.
-- gateway - Initial support for gateway (gw). Traps 230-260, 284-297 added.
-- ups - upsSyncCtrlGroup and upsState sections added.
-- 02/19/03 - v3.6.0 ups - UpsOutletGroups section added. Traps 298-299 added.
-- smw - Traps 300-305 added.
-- rPDU - General OID description cleanups.
-- gw - Updated SNMP support for gw.
-- 05/21/03 - v3.6.1 ups - Updated SNMP support for ups.
-- ems - Environmental Management System OIDs renamed from gateway (gw).
-- raru - Updated SNMP support for raru.
-- 06/13/03 - v3.6.3 airFM - Initial support for airFM. Traps 306-311 added.
-- nl - Traps 261-265 removed.
-- 11/26/03 - v3.6.4 xPDU - Initial support for xPDU. Traps 312-344 added.
-- airPA - Initial support for airPA. Traps 306-311 modified for airPA use.
-- airFM - AirFMStatus OIDs cleaned up.
-- 03/19/04 - v3.6.5 rPDU - Updated SNMP support for rPDU.
-- airFM - AirFMGroup section added.
-- 05/13/04 - v3.6.6 ups - Added several upsAdvBattery OIDs.
-- ems - Added emsStatusHardwareStatus and emsHardwareState traps 345-346.
-- aru - Trap 228 redefined to aruDeviceConfigChange.
-- 08/04/04 - v3.6.7 ups - Added upsAdvConfigNumExternalBatteries and
-- upsAdvConfigSimpleSignalShutdowns.
-- ce - Custom Event traps 347-352 added.
-- 11/22/04 - v3.6.8 ems - Many emsProbeConfig and emsProbeStatus OIDs added.
-- ups - Traps 353-358 added.
-- env - Traps 359-374 added.
-- 01/26/05 - v3.6.9 battman - Initial support for battman, traps 375-380 added.
-- xATS - Initial support for xATS, traps 381-478 added.
-- generator - Initial support for generator.
-- rPDU - Trap edits.
-- xPDU - Trap edits.
-- 05/26/05 - v3.7.0 consolePortServer - Initial support for consolePortServer (cpsAP930x).
-- xPDU - Cleaned up many descriptions.
-- xATS - Cleaned up many descriptions.
-- ups - Added several upsAdvConfig OIDs.
-- 09/28/05 - v3.8.0 modEnvMgr - Initial support for modEnvMgr (mem).
-- rARU - Added functionality for Gen 2 ARU.
-- ups/aru/mem - Traps 500-569 added.
-- all - General cleanup on typos and spelling errors.
-- 01/04/06 - v3.8.1 rARU - Added functionality for Gen 2 ARU
-- 02/22/06 - v3.8.2 accessControl - Initial support for accessControl.
-- Traps 570-592 added.
-- accessPX - Initial support for accessPX.
-- airIR - Initial support for airIR and airIRAlarms.
-- airIRRC - Initial support for airIRRC.
-- 05/24/06 - v3.8.4 apcLocalDisplay - Initial support for apcLocalDisplay.
-- ups - UpsAdvOutputRedundancy, upsAdvOutputKVACapacity,
-- upsAdvConfigBasicSignalLowBatteryDuration, and
-- upsAdvConfigBypassPhaseLockRequired OIDs added.
-- UpsAdvConfigMinReturnRuntime SYNTAX changed.
-- UPS trap numbers 600-623 added.
-- em - New emConfigProbe, emConfigContact, emStatusProbe OIDs added.
-- iem - New iemConfigProbe, iemConfigContact, iemStatusProbe OIDs added.
-- 08/31/06 - v3.8.5 airIRSC - Initial support for airIRSC.
-- XPDU - XPDUBranchBreaker OIDs and xPDUBranchCurrent traps added.
-- 11/03/06 - v3.8.6 rPDU - Updated SNMP support for rPDU.
-- accessPX - accessPXConfigCardFormat OID added.
-- airIRSC - airIRSCUnitStatusCompressor added.
-- 01/03/07 - v3.8.7 airIRRP - Initial support for airIRRP100 and airIRRP500.
-- 04/06/07 - v3.8.8 battMan - Updated SNMP support for Battery Manager,
-- battManConfigApplication OID deprecated.
-- airIRRP - Added HeatAssistEnable to airIRRP100 and airIRRP500.
-- ups - Added several upsDiagSubSys OIDs.
-- iem - Added iemStatusProbeLocation OID.
-- all - Cleaned up version history section.
-- 12/19/07 - v3.9.1 airFM - Added full SNMP support, deprecating some existing OIDs in
-- favor of new structure.
-- 12/19/07 - v3.9.2 Added new OIDs for isxModularDistribution, isxModularPdu, airInRoomPerimeter
-- airIRGen2, symmetraPX IDs, isxServers IDs, upsAdvConfig, upsDiagSubSysNetworkComCard,
-- memInputsCommStatus, airIRRP100GroupSetpoints. Added new SNMP Traps for
-- ISX Modular Distribution, and xATS.
-- 08/13/08 - v3.9.3 Added new OIDs for UPS HighPrec OIDs:
-- upsHighPrecBattery, upsHighPrecInput, and upsHighPrecOutput.
-- Added new OIDs for the 10kW the AIR IR Gen2:
-- airIRG2RDT2ConfigUnitRoleOverride, airIRG2RDT2RunHoursUnit,
-- airIRG2GroupConfigNumberofBackupUnits, airIRG2GroupConfigRuntimeBalancingEnable,
-- and airIRG2GroupConfigLoadAssistEnable for use by 10kW application.
-- Added new traps apcInternalCommunicationFault and apcInternalCommunicationFaultCleared
-- for use by the SUMX application.
-- Updated descriptions in existing OIDs.
-- 09/25/08 - v3.9.4 Added new OIDs for Symmetra PX:
-- upsParallelSystem, upsPhysicalLayout, upsAdvConfigMainsSetting, upsAdvConfigACWiringSetting,
-- upsAdvConfigUpperOutputVoltTolerance, upsAdvConfigLowerOutputVoltTolerance, upsAdvConfigUpperBypassVoltTolerance
-- upsAdvConfigLowerBypassVoltTolerance, upsAdvConfigOutofSyncBypassTransferDelay, upsAdvTestDiagnosticTime
-- upsAdvTestDiagnosticDay, upsDiagSwitchGearBypassInputSwitchStatus, upsDiagSubFeedBreakerTable,
-- upsDiagSubFeedBreakerTable, upsSideCarFrameLayoutTable, upsPowerFrameLayoutTable
-- Added new OIDs for UPSs:
-- upsBasicSystemStatus, upsAdvControlFlashAndBeep (appended new list options)
-- Added new OIDs for the AC RP10kW:
-- airIRG2RDT2ConfigUnitIdleOnCoolFail
-- Added new OID for isxModularPDU device:
-- isxModularPduDeviceTransformerPresent (appended new list option)
-- 02/24/09 - v3.9.5 Added new OIDs for the UPS Integrated ATS product, Air IRSC product, added new Traps for UPS support
-- and fixed MIB compilier warnings.
-- 02/24/09 - v3.9.6 Added new Traps and mtrapargs for the ISXC Trap Notification support.
-- 09/18/09 - v3.9.8 Added new OIDs for the InRoom C7000 Air product.
-- 04/14/10 - v3.9.9 Added new rPDU2 device and modified some rPDU OIDs.
-- 06/22/10 - v4.0.0 Added traps 638 through 651 to support ATS.
-- Updated control OIDs for rPDU2g
-- Updates to support PX100kW UPS.
-- Added traps 756 and 757 to support PX100kW UPS.
-- Added upsAdvBattery, upsHighPrecBattery, and upsDiagBattery OIDs to support PX250kW/PX500kW UPS.
-- 06/30/10 - v4.0.1 Added new OID's upsAdvBatteryFullCapacity, upsAdvInputNominalFrequency, upsAdvInputNominalVoltage,
-- upsAdvInputBypassNominalFrequency, upsAdvInputBypassNominalVoltage, upsBasicSystemInternalTemperature,
-- upsAdvOutputNominalFrequency, upsAdvOutputActivePower and upsAdvOutputApparentPower.
-- Added traps 734 to 739 to support Galaxy 300 and Galaxy 7000 UPS.
-- Added SyOid's galaxy300UPS10kVA33, galaxy300UPS15kVA33, galaxy300UPS20kVA33,
-- galaxy300UPS30kVA33, galaxy300UPS40kVA33, galaxy300UPS10kVA31, galaxy300UPS15kVA31,
-- galaxy300UPS20kVA31 and galaxy300UPS30kVA31,galaxy7000UPS200kVA,galaxy7000UPS250kVA,
-- galaxy7000UPS300kVA,galaxy7000UPS400kVA,galaxy7000UPS500kVA,galaxy7000SSC800kVA,
-- galaxy7000SSC1200kVA and galaxy7000SSC2000kVA.
-- 10/27/10 - v4.0.2 Added Idle on Cool Fail and Fan Speed Control OIDs for the InRow ACRC.
-- Added new OID's for Odin UPS upsAdvInputStatisticsTable, upsAdvInputApparentPower,
-- upsAdvInputVoltageTHD, upsAdvInputBypassVoltageTHD, upsAdvInputPeakCurrent, upsAdvInputBypassPeakCurrent,
-- upsAdvOutputStatisticsTable, upsAdvOutputPeakCurrent, upsAdvOutputCurrentTHD, upsAdvOutputCrestFactor,
-- upsAdvStateTotaltimeonbattery, upsAdvStateTotaltimeonbypass, upsAdvStateTotaltimeonNormal,
-- upsAdvStateNumberoftimesonbattery, upsAdvStateNumberoftimesbypass, upsAdvStateNumberoftimesNormal,
-- subfeedBreakerUpperAcceptPowerCritical, upsParallelInputMaximumCurrent, upsParallelTotalOutputPower,
-- upsParallelTotalOutputApparentPower, upsParallelInputCurrent, upsParallelInputActivePower,
-- upsParallelInputApparentPower, upsParallelInputVoltage, upsParallelInputMaxVoltage,
-- upsParallelInputMaxCurrent, upsParallelInputTotalActivePower, upsParallelInputTotalApparentPower,
-- upsParallelOutputCurrent, upsParallelOutputLoad, upsParallelOutputPercentLoad, upsParallelOutputPower,
-- upsParallelOutputApparentPower, upsParallelDiagSubSysBreakerStatus, upsParallelDiagSubSysBreakerName
-- and upsParallelOutputTotalPercentLoad.
-- Modified the OID upsAdvConfigOutputFreqRange and upsParallelSysRedundancy.
-- 01/13/11 - v4.0.3 Added new oids, upsHighPrecOutputEfficiency and upsHighPrecOutputEnergyUsage.
-- Added green mode for bit 51 of upsBasicStateOutputState.
-- Added traps 758 to 763 to support UPS firmware update.
-- Deprecated all OIDs off branch mfiletransfer
-- Added rPDU2 Metered Outlet Data
-- 08/17/11 - v4.0.4 Updated several rPDU2 and rPDU OIDs.
-- 12/07/11 - v4.0.5 Added new OID's for SYPX upsPhaseOutputPowerFactor and symmetraPxDisplay.
-- Added SYS OID's for different Caphorn models galaxy5000UPS20KVA, galaxy5000UPS30KVA, galaxy5000UPS40KVA
-- galaxy5000UPS50KVA, galaxy5000UPS60KVA , galaxy5000UPS80KVA, galaxy5000UPS100KVA, galaxy5000UPS120KVA
-- galaxy5000UPS130KVA, galaxy5500UPS20KVA, galaxy5500UPS30KVA, galaxy5500UPS40KVA, galaxy5500UPS50KVA
-- galaxy5500UPS60KVA, galaxy5500UPS80KVA, galaxy5500UPS100KVA, galaxy5500UPS120KVA, galaxy5500UPS130KVA
-- and new OID upsAdvStateEcomode
-- 06/05/12 - v4.0.6 Added new OID rPDUIdentDeviceLineToNeutralVoltage for AP7823 Rack PDU.
-- 06/20/12 - v4.0.6 Added new rPDU2Group OID table for AP84xx, AP86xx, AP88xx, AP89xx Rack PDUs.
-- 08/10/12 - v4.0.6 Added new OIDs for SYPX 250/500 upsAdvConfigWarningAlarmDelay, upsAdvConfigInformationalAlarmDelay, upsDiagSwitchGearInstallationLoadPct,
-- upsParallelOutputActivePowerTable,upsParallelSysSwitchGearInstallationLoadPct, upsParallelSysRedundancyStatus and upsParallelSysName.
-- Modified the description for upsBasicBatteryLastReplaceDate and bit 51 of upsBasicStateOutputState.
-- Updated upsBasicOutputStatus and upsBasicSystemStatus.
-- 08/10/12 - v4.0.6 Added SYS OIDs for different Caphorn models galaxy9000UPS, galaxy9000SSC, galaxy9000UPSWithSSC, galaxy9000FreqConverter, eps6000UPS,
-- eps6000SSC, eps6000UPSWithSSC, eps6000FreqConverter, eps7000UPS, eps7000SSC, eps7000UPSWithSSC,
-- eps7000FreqConverter, eps8000UPS, eps8000SSC, eps8000UPSWithSSC, eps8000FreqConverter.
-- Modified the description for bits 53 to 56 of upsBasicStateOutputState.
-- 02/22/13 -v4.0.8 Added OIDs upsAdvBatteryInternalSKU, upsAdvBatteryExternalSKU, upsAdvBatteryRecommendedReplaceDate,
-- upsAdvConfigGreenMode, upsAdvConfigLCDLocalLanguage, upsAdvConfigLCDLockOut,
-- upsAdvConfigChargerRate, and upsAdvConfigBatterySelection for the SUMX application.
-- 04/10/13 -v4.0.9 Added new SYS OID for sPDU masterSwitchsPDU
-- 10/18/13 -v4.1.0 Added new cooling section of OIDs for second generation cooling products.
-- 02/17/14 -v4.1.1 Added the OIDs for Valhal(Galaxy VM)UPS.
-- 08/11/14 -v4.1.2 Added upsHighPrecBatteryPacks category.
-- Added upsHighPrecInputBypassVoltage and upsHighPrecInputBypassFrequency OIDs.
-- Added traps upsLocalDisplayButtonFault, upsLocalDisplayButtonFaultCleared, upsNeedsFactorySetupFault,
-- upsNeedsFactorySetupFaultCleared, upsEPOActive, upsEPOActiveCleared, upsFirmwareMismatch, upsFirmwareMismatchCleared,
-- upsOscillatorFailed, and upsOscillatorFailedCleared
-- Updated the description for upsHighPrecOutputEfficiency to display all currently defined error conditions.
-- 11/25/14 -v4.1.4 Changes for IRRP100 and IRRP500:
-- 1.New OIDs added to support Active Flow Controller:
-- airIRRP100GroupStatusActiveFlowControlStatus, airIRRP100GroupSetpointsActiveFlowControlBias, airIRRP100GroupConfigNumberOfActiveFlowControllers,
-- airIRRP100GroupConfigActiveFlowControllerLampTest, airIRRP100GroupConfigAltitudeUS, airIRRP100GroupConfigAltitudeMetric,
-- airIRRP500GroupStatusActiveFlowControlStatus, airIRRP500GroupSetpointsActiveFlowControlBias, airIRRP500GroupConfigNumberOfActiveFlowControllers,
-- airIRRP500GroupConfigActiveFlowControllerLampTest, airIRRP500GroupConfigAltitudeUS, airIRRP500GroupConfigAltitudeMetric.
-- 2.Updated OIDs airIRRP100GroupConfigConfigurationType and airIRRP500GroupConfigConfigurationType to support CACS strategy.
-- 3.Added OIDs airIRRP100UnitConfigSecondaryPowerFeedCapability and airIRRP500UnitConfigSecondaryPowerFeedCapability
-- to support secondary power feed capability.
-- 4.Added OIDs airIRRP100UnitConfigIdleOnCoolFail and airIRRP500UnitConfigIdleOnCoolFail to support Idle on Cool Fail setting.
-- 5.Added OIDs airIRRP100GroupStatusDewPointTempUS, airIRRP100GroupStatusDewPointTempMetric, airIRRP500GroupStatusDewPointTempUS
-- and airIRRP500GroupStatusDewPointTempMetric to support the group dew point temperature.
-- 6.Added OIDs airIRRP100UnitStatusLeakSensor and airIRRP500UnitStatusLeakSensor to support leak sensor status.
-- 05/06/15 -v4.1.5 Added configurable contact OID rPDU2DeviceConfigContact.
-- Added enums for the chargerSpotmode, inverterSpotmode state in upsBasicOutputStatus OID and StaticBypassStandby state in the upsBasicSystemStatus OID.
-- Added new OIDs to support Active Flow Controller for airIRSC:
-- airIRSCGroupConfigNumberOfActiveFlowControllers, airIRSCGroupConfigActiveFlowControllerLampTest,
-- airIRSCGroupStatusActiveFlowControlStatus, airIRSCGroupSetpointsActiveFlowControlBias, airIRSCUnitStatusLeakSensor
-- 07/13/15 -v4.1.6 Changes for airIR Gen2 RD:
-- 1. Updated airIRG2GroupConfigConfigurationType to support CACS strategy.
-- 2. Added airIRG2RDT2StatusLeakSensor to support leak sensor status.
-- 3. Added OIDs to support Active Flow Controller:
-- airIRG2GroupStatusActiveFlowControlStatus,airIRG2GroupSetpointsActiveFlowControlBias,airIRG2GroupConfigNumberOfActiveFlowControllers,
-- airIRG2GroupConfigActiveFlowControllerLampTest,airIRG2GroupConfigAltitudeUS,airIRG2GroupConfigAltitudeMetric.
-- 08/05/15 -v4.1.7 Changes for SUMX and SY:
-- 1. Added upsAdvConfigBatteryHealthAlarmWarningTime and upsAdvConfigBatteryHealthAlarmSleepTime OIDs.
-- 2. Added upsDCOutput OIDs to support UPSes with DC outputs
-- 3. Added upsOnBatteryDueToFault and upsOnBatteryDueToFaultCleared for Symmetra UPSes.
-- 04/27/16 -v4.1.8 Changes for Galaxy VX:
-- 1. Added SYSOIDs for various models of Galaxy VX galaxyVXUPS500kVA, galaxyVXUPS625kVA, galaxyVXUPS750kVA, galaxyVXUPS1000kVA,
-- galaxyVXUPS1250kVA and galaxyVXUPS1500kVA
-- 2. Added New OIDs upsAdvInputEnergyUsage, upsAdvOutputEnergyUsage, upsDiagnosticPowerCabinet and upsDiagSwitchgearAmbientTemperature.
-- 3. Replaced the options "batteryBreaker1" and "batteryBreaker2" from "switchgearBreakerType" in OID upsDiagSwitchGearBreakerTable with
-- "batteryBreaker" and "bypassBackFeedBreaker".
-- 05/11/16 -v4.1.8 Added SYSOID for Air Economizer.
-- 07/01/16 -v4.1.9 Added support for PowerChute Network Shutdown.
-- 08/18/16 -v4.2.0 Added description "Minor or Environment Alarm" for bit 60 of OID upsBasicStateOutputState.
-- 09/08/16 -v4.2.0 Added support for AP7xxxB series Rack PDUs
-- 09/08/16 -v4.2.0 Added the following tables for NB250:
-- 1.emsInputStateSensorConfig, emsInputStateSensorStatus, memInputStateSensors
-- 2.Added wireless entry under environmentalMonitor.
-- 09/30/16 -v4.2.1 Changes for SUMX:
-- Added upsAdvConfigSignalFlashVoltage and upsAdvConfigBatteryTemperatureCompensation.
-- Added upsIntegratedUIO and subtree upsOutputRelays.
-- Added configuration oids for universal input / output ports and associated sensors.
-- Added upsHighPrecBatteryHealth.
-- Added upsOutletGroupStatusGroupFullState in upsOutletGroupStatusTable.
-- Added trap for temporary bypass.
-- Updated fault list for upsDCOutputStatusAbnormalConditions.
-- 01/24/17 -v4.2.2 Changes for G300: Added Oids upsAdvConfigBatteryChargerType, upsAdvConfigAutomaticRestart, upsAdvConfigDeepDischargeProtection,
-- upsAdvConfigFreqBypassTransferRange, upsAdvConfigUpsPowerconverterType, upsAdvConfigFrequencyConverterMode,upsEcoModeSetting,
-- upsEcoModeFreqTransferRange, upsEcoModeHighVoltThreshold, upsEcoModeLowVoltThreshold,upsParallelNumOfUpsPoweringLoad,
-- upsParallelMinNumOfRequiredUps.
-- 08/03/2017 Changed the range value for xPDUSystemOutputOverCurrentThreshold and xPDUSystemOutputOverCurrentNeutralThreshold
-- from 100 to 110 to maintain consistency across all interfaces.
-- 03/24/17 Changes for Galaxy VX and Galaxy VM
-- Added the options NiCd and Li-Ion to upsAdvConfigBatterySelection.
-- 03/31/2017 -v4.2.3 Changes for NB250:
-- Added new card option to accessPXConfigCardFormat.
-- 08/02/2017 -v4.2.4 Changes for G7000: Added new oid's to support EBM and ECO modes and upsAdvBatteryNominalBackupTime.
-- 11/13/2017 Changes for NB250: Added oid's memSensorsTemperatureHighPrec, memOutputStatusAlarmState, memOutletStatusAlarmState, memBeaconStatusAlarmState,
-- wirelessSensorStatusLocation, wirelessSensorStatusAlarmStatus, wirelessSensorPodStatusLocation, wirelessSensorPodStatusAlarmStatus,
-- wirelessSensorConfigLocation, wirelessSensorPodConfigLocation.
-- 3/2/2018 -v4.2.7 Corrected OBJECT-TYPE and DESCRIPTION for airIRRP500UnitThresholdsSupplyHumidityHigh and airIRRP500UnitThresholdsSupplyHumidityLow to
-- airIRRP500UnitThresholdsReturnHumidityHigh and airIRRP500UnitThresholdsReturnHumidityLow.
-- 9/11/2018 -v4.2.8 Added oid's upsHighPrecBatteryPackOnlyTableSize, upsHighPrecBatteryPackOnlyIndex, upsHighPrecBatteryPackOnlyFirmwareRevision,
-- upsHighPrecBatteryPackOnlySerialNumber, upsHighPrecBatteryPackOnlyTemperature, upsHighPrecBatteryPackOnlyStatus, upsHighPrecBatteryPackOnlyHealth,
-- upsHighPrecBatteryPackOnlyReplaceDate, upsHighPrecBatteryPackOnlyInstallDate.
-- 01/31/2019 -v4.2.9 Added a new SYSOID for galaxyVXUPS1100kVA for Galaxy VX.
-- 02/15/2019 -v4.3.0 Added oid's rPDU2IdentBootMonitorRev,rPDU2IdentLongDescription,rPDU2IdentNMCSerialNumber,rPDU2DevicePropertiesDevicePowerRating
-- rPDU2OutletSwitchedConfigExternalLink,rPDU2OutletSwitchedStatusExternalLink,rPDU2OutletMeteredConfigExternalLink,rPDU2OutletMeteredStatusReceptacleType,
-- rPDU2OutletMeteredStatusExternalLink.
-- 03/11/2019 Added oid upsAdvConfigACQualificationTime.
-- 10/29/2019 Added oid upsHighPrecExtdBatteryTemperature.
-- Added traps upsInputContactOutputRelayFault, upsInputContactOutputRelayFaultCleared, upsAirFilterWarning, upsAirFilterWarningCleared
-- upsBatteryPackIncompatible, upsBatteryPackIncompatibleCleared, upsInputContactAbnormal, upsInputContactAbnormalCleared,
-- upsOutputRelayAbnormal, upsOutputRelayAbnormalCleared.
-- 05/12/2020 Modified the description for atsOutputPower and atsOutputBankPower OIDs.
-- 08/27/2020 Changed oid upsEnergyEfficiencyStatsTimeSinceReset to upsEnergyEfficiencyStatsOutputEnergyTimeSinceReset and modified the description
-- Modified the descriptions for oids upsEnergyEfficiencyStatsTimeInECOmode and upsEnergyEfficiencyStatsTimeInECOnversion
-- Added oids upsEnergyEfficiencyStatsInputEnergyTimeSinceReset, upsEnergyEfficiencyStatsECOmodeTimeSinceReset
-- and upsEnergyEfficiencyStatsECOnversionTimeSinceReset
-- Modified the description for oid upsBasicIdentName
-- ********************************************************************************************
-- ********************************************************************************************
-- PowerNet-MIB { iso org(3) dod(6) internet(1) private(4)
-- enterprises(1) apc(318) }
PowerNet-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, IpAddress, Gauge, TimeTicks FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215;
-- IMPORTS End
apc OBJECT IDENTIFIER ::= { enterprises 318 }
products OBJECT IDENTIFIER ::= { apc 1 }
apcmgmt OBJECT IDENTIFIER ::= { apc 2 }
hardware OBJECT IDENTIFIER ::= { products 1 }
software OBJECT IDENTIFIER ::= { products 2 }
system OBJECT IDENTIFIER ::= { products 3 }
experimental OBJECT IDENTIFIER ::= { products 4 }
mconfig OBJECT IDENTIFIER ::= { apcmgmt 1 }
mcontrol OBJECT IDENTIFIER ::= { apcmgmt 2 }
mtrapargs OBJECT IDENTIFIER ::= { apcmgmt 3 }
mfiletransfer OBJECT IDENTIFIER ::= { apcmgmt 4 }
mconfigClock OBJECT IDENTIFIER ::= { mconfig 6 }
mfiletransferStatus OBJECT IDENTIFIER ::= { mfiletransfer 1 }
mfiletransferConfig OBJECT IDENTIFIER ::= { mfiletransfer 2 }
mfiletransferControl OBJECT IDENTIFIER ::= { mfiletransfer 3 }
mfiletransferConfigSettings OBJECT IDENTIFIER ::= { mfiletransferConfig 1 }
mfiletransferConfigTFTP OBJECT IDENTIFIER ::= { mfiletransferConfig 2 }
mfiletransferConfigFTP OBJECT IDENTIFIER ::= { mfiletransferConfig 3 }
ups OBJECT IDENTIFIER ::= { hardware 1 }
measureUps OBJECT IDENTIFIER ::= { hardware 2 }
miniSNMPadapter OBJECT IDENTIFIER ::= { hardware 3 }
masterswitch OBJECT IDENTIFIER ::= { hardware 4 }
masterswitchVM OBJECT IDENTIFIER ::= { hardware 5 }
masterswitchMSP OBJECT IDENTIFIER ::= { hardware 6 }
dcDM3 OBJECT IDENTIFIER ::= { hardware 7 }
automaticTransferSwitch OBJECT IDENTIFIER ::= { hardware 8 }
dc2 OBJECT IDENTIFIER ::= { hardware 9 }
environmentalMonitor OBJECT IDENTIFIER ::= { hardware 10 }
netlock OBJECT IDENTIFIER ::= { hardware 11 }
rPDU OBJECT IDENTIFIER ::= { hardware 12 }
airConditioners OBJECT IDENTIFIER ::= { hardware 13 }
rARU OBJECT IDENTIFIER ::= { hardware 14 }
xPDU OBJECT IDENTIFIER ::= { hardware 15 }
battMan OBJECT IDENTIFIER ::= { hardware 16 }
xATS OBJECT IDENTIFIER ::= { hardware 17 }
generator OBJECT IDENTIFIER ::= { hardware 18 }
consolePortServer OBJECT IDENTIFIER ::= { hardware 19 }
accessControl OBJECT IDENTIFIER ::= { hardware 20 }
apcLocalDisplay OBJECT IDENTIFIER ::= { hardware 21 }
isxModularDistribution OBJECT IDENTIFIER ::= { hardware 22 }
isxModularPdu OBJECT IDENTIFIER ::= { hardware 23 }
universalInputOutput OBJECT IDENTIFIER ::= { hardware 25 }
rPDU2 OBJECT IDENTIFIER ::= { hardware 26 }
cooling OBJECT IDENTIFIER ::= { hardware 27 }
powerManagementModule OBJECT IDENTIFIER ::= { hardware 28 }
charger OBJECT IDENTIFIER ::= { hardware 29 }
ePDU OBJECT IDENTIFIER ::= { hardware 30 }
powerNetSubAgent OBJECT IDENTIFIER ::= { software 1 }
struxureWareOperations OBJECT IDENTIFIER ::= { software 2 }
powerChuteNetworkShutdown OBJECT IDENTIFIER ::= { software 3 }
powerChuteBusinessEdition OBJECT IDENTIFIER ::= { software 4 }
struxureWareOperationsStatus OBJECT IDENTIFIER ::= { struxureWareOperations 1 }
powerNetSoftwareSystem OBJECT IDENTIFIER ::= { powerNetSubAgent 1 }
powerNetSoftwareConfig OBJECT IDENTIFIER ::= { powerNetSubAgent 2 }
backUPS OBJECT IDENTIFIER ::= { system 1 }
smartUPS OBJECT IDENTIFIER ::= { system 2 }
matrixUPS OBJECT IDENTIFIER ::= { system 3 }
masterSwitch OBJECT IDENTIFIER ::= { system 4 }
symmetraUPS OBJECT IDENTIFIER ::= { system 5 }
dp100E OBJECT IDENTIFIER ::= { system 6 }
dp300E OBJECT IDENTIFIER ::= { system 7 }
monitors OBJECT IDENTIFIER ::= { system 8 }
redundantSwitch OBJECT IDENTIFIER ::= { system 9 }
dcPower OBJECT IDENTIFIER ::= { system 10 }
automaticXferSwitch OBJECT IDENTIFIER ::= { system 11 }
netLock OBJECT IDENTIFIER ::= { system 12 }
symmetra3PhaseUPS OBJECT IDENTIFIER ::= { system 13 }
networkAir OBJECT IDENTIFIER ::= { system 14 }
infraStruXurePDU OBJECT IDENTIFIER ::= { system 15 }
ais5000UPS OBJECT IDENTIFIER ::= { system 16 }
smartUPS3Phase OBJECT IDENTIFIER ::= { system 17 }
battManager OBJECT IDENTIFIER ::= { system 18 }
infraStruXureATS OBJECT IDENTIFIER ::= { system 19 }
conPortServ OBJECT IDENTIFIER ::= { system 20 }
gutor OBJECT IDENTIFIER ::= { system 21 }
accControl OBJECT IDENTIFIER ::= { system 22 }
symmetraPX OBJECT IDENTIFIER ::= { system 23 }
isxModDistribution OBJECT IDENTIFIER ::= { system 24 }
isxServers OBJECT IDENTIFIER ::= { system 25 }
smartUPS2 OBJECT IDENTIFIER ::= { system 27 }
galaxy OBJECT IDENTIFIER ::= { system 28 }
eps OBJECT IDENTIFIER ::= { system 30 }
pcns OBJECT IDENTIFIER ::= { system 31 }
pcbe OBJECT IDENTIFIER ::= { system 33 }
pmm OBJECT IDENTIFIER ::= { system 34 }
rpp OBJECT IDENTIFIER ::= { system 35 }
battManIdent OBJECT IDENTIFIER ::= { battMan 1 }
battManSystemCalib OBJECT IDENTIFIER ::= { battMan 2 }
battManUnitCalib OBJECT IDENTIFIER ::= { battMan 3 }
battManStringCalib OBJECT IDENTIFIER ::= { battMan 4 }
battManBatteryCalib OBJECT IDENTIFIER ::= { battMan 5 }
battManConfig OBJECT IDENTIFIER ::= { battMan 6 }
battManAlarm OBJECT IDENTIFIER ::= { battMan 7 }
battManSystemStatus OBJECT IDENTIFIER ::= { battMan 8 }
battManStringStatus OBJECT IDENTIFIER ::= { battMan 9 }
battManBatteryStatus OBJECT IDENTIFIER ::= { battMan 10 }
battManInputContactStatus OBJECT IDENTIFIER ::= { battMan 11 }
battManControl OBJECT IDENTIFIER ::= { battMan 12 }
battManTestResults OBJECT IDENTIFIER ::= { battMan 13 }
battManUnitStatus OBJECT IDENTIFIER ::= { battMan 14 }
xPDUIdent OBJECT IDENTIFIER ::= { xPDU 1 }
xPDUDevice OBJECT IDENTIFIER ::= { xPDU 2 }
xPDUACMonitoringPoint OBJECT IDENTIFIER ::= { xPDU 3 }
xPDUCircuitBreakers OBJECT IDENTIFIER ::= { xPDU 4 }
xPDUInputContacts OBJECT IDENTIFIER ::= { xPDU 5 }
xPDUOutputRelays OBJECT IDENTIFIER ::= { xPDU 6 }
xPDUMiscGroup OBJECT IDENTIFIER ::= { xPDU 7 }
xPDUMainInput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 1 }
xPDUBypassInput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 2 }
xPDUUPSInput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 3 }
xPDUSystemOutput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 4 }
xPDUGroundMonitorPoint OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 5 }
xPDUSystemBreakers OBJECT IDENTIFIER ::= { xPDUCircuitBreakers 1 }
xPDUBranchBreakers OBJECT IDENTIFIER ::= { xPDUCircuitBreakers 2 }
pmmIdent OBJECT IDENTIFIER ::= { powerManagementModule 1 }
pmmDevice OBJECT IDENTIFIER ::= { powerManagementModule 2 }
pmmMonitoring OBJECT IDENTIFIER ::= { powerManagementModule 3 }
pmmInput OBJECT IDENTIFIER ::= { pmmMonitoring 1 }
pmmOutput OBJECT IDENTIFIER ::= { pmmMonitoring 2 }
pmmBranch OBJECT IDENTIFIER ::= { pmmMonitoring 3 }
pmmSiteConfig OBJECT IDENTIFIER ::= { pmmMonitoring 4 }
chargerIdent OBJECT IDENTIFIER ::= { charger 1 }
chargerInput OBJECT IDENTIFIER ::= { charger 2 }
chargerOutput OBJECT IDENTIFIER ::= { charger 3 }
xATSIdent OBJECT IDENTIFIER ::= { xATS 1 }
xATSDevice OBJECT IDENTIFIER ::= { xATS 2 }
xATSSwitch OBJECT IDENTIFIER ::= { xATS 3 }
xATSACMonitoringPoint OBJECT IDENTIFIER ::= { xATS 4 }
xATSTesting OBJECT IDENTIFIER ::= { xATS 5 }
xATSInputContacts OBJECT IDENTIFIER ::= { xATS 6 }
xATSOutputRelays OBJECT IDENTIFIER ::= { xATS 7 }
xATSMisc OBJECT IDENTIFIER ::= { xATS 8 }
xATSSwitchStatus OBJECT IDENTIFIER ::= { xATSSwitch 1 }
xATSSwitchSettings OBJECT IDENTIFIER ::= { xATSSwitch 2 }
xATSSwitchTimers OBJECT IDENTIFIER ::= { xATSSwitch 3 }
xATSSwitchBlockMap OBJECT IDENTIFIER ::= { xATSSwitch 4 }
xATSSwitchStatistics OBJECT IDENTIFIER ::= { xATSSwitch 5 }
xATSSource1 OBJECT IDENTIFIER ::= { xATSACMonitoringPoint 1 }
xATSSource2 OBJECT IDENTIFIER ::= { xATSACMonitoringPoint 2 }
xATSSystemOutput OBJECT IDENTIFIER ::= { xATSACMonitoringPoint 3 }
xATSTestingStatus OBJECT IDENTIFIER ::= { xATSTesting 1 }
xATSTestingResults OBJECT IDENTIFIER ::= { xATSTesting 2 }
xATSTestingSchedule OBJECT IDENTIFIER ::= { xATSTesting 3 }
xATSTestingSimulatePowerFail OBJECT IDENTIFIER ::= { xATSTesting 4 }
xATSGenerator OBJECT IDENTIFIER ::= { generator 1 }
xATSGeneratorIdent OBJECT IDENTIFIER ::= { xATSGenerator 1 }
xATSGeneratorStatus OBJECT IDENTIFIER ::= { xATSGenerator 2 }
xATSGeneratorAdvStatus OBJECT IDENTIFIER ::= { xATSGenerator 3 }
xATSGeneratorOutput OBJECT IDENTIFIER ::= { xATSGenerator 4 }
xATSGeneratorSettings OBJECT IDENTIFIER ::= { xATSGenerator 5 }
xATSGeneratorService OBJECT IDENTIFIER ::= { xATSGenerator 6 }
xATSGeneratorFuelSystem OBJECT IDENTIFIER ::= { xATSGenerator 7 }
cpsAP930x OBJECT IDENTIFIER ::= { consolePortServer 1 }
cpsAP930xSys OBJECT IDENTIFIER ::= { cpsAP930x 1 }
cpsAP930xConf OBJECT IDENTIFIER ::= { cpsAP930x 2 }
cpsAP930xInfo OBJECT IDENTIFIER ::= { cpsAP930x 3 }
cpsAP930xAdm OBJECT IDENTIFIER ::= { cpsAP930x 4 }
smartUPS250 OBJECT IDENTIFIER ::= { smartUPS 1 }
smartUPS400 OBJECT IDENTIFIER ::= { smartUPS 2 }
smartUPS600 OBJECT IDENTIFIER ::= { smartUPS 3 }
smartUPS900 OBJECT IDENTIFIER ::= { smartUPS 4 }
smartUPS1250 OBJECT IDENTIFIER ::= { smartUPS 5 }
smartUPS2000 OBJECT IDENTIFIER ::= { smartUPS 6 }
smartUPS450 OBJECT IDENTIFIER ::= { smartUPS 7 }
smartUPS700 OBJECT IDENTIFIER ::= { smartUPS 8 }
smartUPS1000 OBJECT IDENTIFIER ::= { smartUPS 9 }
smartUPS1400 OBJECT IDENTIFIER ::= { smartUPS 10 }
smartUPS2200 OBJECT IDENTIFIER ::= { smartUPS 11 }
smartUPS3000 OBJECT IDENTIFIER ::= { smartUPS 12 }
smartUPS5000 OBJECT IDENTIFIER ::= { smartUPS 13 }
smartUPS7500 OBJECT IDENTIFIER ::= { smartUPS 14 }
smartUPS10000 OBJECT IDENTIFIER ::= { smartUPS 15 }
smartUPS1500 OBJECT IDENTIFIER ::= { smartUPS 16 }
smartUPS3000DSP OBJECT IDENTIFIER ::= { smartUPS 17 }
smartUPS5000DSP OBJECT IDENTIFIER ::= { smartUPS 18 }
smartUPS8000 OBJECT IDENTIFIER ::= { smartUPS 19 }
matrixUPS3000 OBJECT IDENTIFIER ::= { matrixUPS 1 }
matrixUPS5000 OBJECT IDENTIFIER ::= { matrixUPS 2 }
masterSwitchV1 OBJECT IDENTIFIER ::= { masterSwitch 1}
masterSwitchV2 OBJECT IDENTIFIER ::= { masterSwitch 2}
masterSwitchVM OBJECT IDENTIFIER ::= { masterSwitch 3}
masterSwitchMSP OBJECT IDENTIFIER ::= { masterSwitch 4}
masterSwitchrPDU OBJECT IDENTIFIER ::= { masterSwitch 5}
masterSwitchrPDU2 OBJECT IDENTIFIER ::= { masterSwitch 6}
masterSwitchsPDU OBJECT IDENTIFIER ::= { masterSwitch 7}
masterSwitchrPDUB OBJECT IDENTIFIER ::= { masterSwitch 8}
masterSwitchePDU OBJECT IDENTIFIER ::= { masterSwitch 9}
symmetraUPS4kVA OBJECT IDENTIFIER ::= { symmetraUPS 1 }
symmetraUPS8kVA OBJECT IDENTIFIER ::= { symmetraUPS 2 }
symmetraUPS12kVA OBJECT IDENTIFIER ::= { symmetraUPS 3 }
symmetraUPS16kVA OBJECT IDENTIFIER ::= { symmetraUPS 4 }
environmental OBJECT IDENTIFIER ::= { monitors 1 }
environmentalMgtSystem OBJECT IDENTIFIER ::= { monitors 2 }
emu2 OBJECT IDENTIFIER ::= { monitors 3 }
mem OBJECT IDENTIFIER ::= { monitors 4 }
dm3 OBJECT IDENTIFIER ::= { dcPower 1 }
dcmim2 OBJECT IDENTIFIER ::= { dcPower 2 }
symmetra3PhaseUPS40kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 1 }
symmetra3PhaseUPS60kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 2 }
symmetra3PhaseUPS80kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 3 }
symmetra3PhaseUPS20kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 4 }
airFMSeries OBJECT IDENTIFIER ::= { networkAir 1 }
rackAirRemovalUnit OBJECT IDENTIFIER ::= { networkAir 2 }
airPASeries OBJECT IDENTIFIER ::= { networkAir 3 }
airIRSC100Series OBJECT IDENTIFIER ::= { networkAir 4 }
airIRRC100Series OBJECT IDENTIFIER ::= { networkAir 5 }
airIRRP100Series OBJECT IDENTIFIER ::= { networkAir 6 }
airIRRP500Series OBJECT IDENTIFIER ::= { networkAir 7 }
airIRRD100Series OBJECT IDENTIFIER ::= { networkAir 8 }
airInRoomPerimeter OBJECT IDENTIFIER ::= { networkAir 9 }
airACRC300Series OBJECT IDENTIFIER ::= { networkAir 10 }
airLESeries OBJECT IDENTIFIER ::= { networkAir 11 }
airIRRDU OBJECT IDENTIFIER ::= { networkAir 12 }
airEcoBreeze OBJECT IDENTIFIER ::= { networkAir 13 }
airLELSeries OBJECT IDENTIFIER ::= { networkAir 14 }
airACRC600Series OBJECT IDENTIFIER ::= { networkAir 15 }
airACRD600Series OBJECT IDENTIFIER ::= { networkAir 16 }
airEconomizer OBJECT IDENTIFIER ::= { networkAir 17 }
airTSAChillers OBJECT IDENTIFIER ::= { networkAir 18 }
airLEG2Series OBJECT IDENTIFIER ::= { networkAir 19 }
airAmico OBJECT IDENTIFIER ::= { networkAir 20 }
airUniflarSP OBJECT IDENTIFIER ::= { networkAir 21 }
airTrimChiller OBJECT IDENTIFIER ::= { networkAir 22 }
airACRD300Series OBJECT IDENTIFIER ::= { networkAir 23 }
ais5000UPS10kVA OBJECT IDENTIFIER ::= { ais5000UPS 1 }
ais5000UPS20kVA OBJECT IDENTIFIER ::= { ais5000UPS 2 }
ais5000UPS30kVA OBJECT IDENTIFIER ::= { ais5000UPS 3 }
ais5000UPS40kVA OBJECT IDENTIFIER ::= { ais5000UPS 4 }
ais5000UPS60kVA OBJECT IDENTIFIER ::= { ais5000UPS 5 }
ais5000UPS80kVA OBJECT IDENTIFIER ::= { ais5000UPS 6 }
ais5000UPS100kVA OBJECT IDENTIFIER ::= { ais5000UPS 7 }
smartUPS3Phase10kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 1 }
smartUPS3Phase15kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 2 }
smartUPS3Phase20kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 3 }
smartUPS3Phase30kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 4 }
smartUPS3Phase40kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 5 }
galaxy7000UPS200kVA OBJECT IDENTIFIER ::= { galaxy 1 }
galaxy7000UPS250kVA OBJECT IDENTIFIER ::= { galaxy 2 }
galaxy7000UPS300kVA OBJECT IDENTIFIER ::= { galaxy 3 }
galaxy7000UPS400kVA OBJECT IDENTIFIER ::= { galaxy 4 }
galaxy7000UPS500kVA OBJECT IDENTIFIER ::= { galaxy 5 }
galaxy7000SSC800kVA OBJECT IDENTIFIER ::= { galaxy 6 }
galaxy7000SSC1200kVA OBJECT IDENTIFIER ::= { galaxy 7 }
galaxy7000SSC2000kVA OBJECT IDENTIFIER ::= { galaxy 8 }
galaxy300UPS10kVA33 OBJECT IDENTIFIER ::= { galaxy 9 }
galaxy300UPS15kVA33 OBJECT IDENTIFIER ::= { galaxy 10 }
galaxy300UPS20kVA33 OBJECT IDENTIFIER ::= { galaxy 11 }
galaxy300UPS30kVA33 OBJECT IDENTIFIER ::= { galaxy 12 }
galaxy300UPS40kVA33 OBJECT IDENTIFIER ::= { galaxy 13 }
galaxy300UPS10kVA31 OBJECT IDENTIFIER ::= { galaxy 14 }
galaxy300UPS15kVA31 OBJECT IDENTIFIER ::= { galaxy 15 }
galaxy300UPS20kVA31 OBJECT IDENTIFIER ::= { galaxy 16 }
galaxy300UPS30kVA31 OBJECT IDENTIFIER ::= { galaxy 17 }
galaxy5000UPS20KVA OBJECT IDENTIFIER ::= { galaxy 18 }
galaxy5000UPS30KVA OBJECT IDENTIFIER ::= { galaxy 19 }
galaxy5000UPS40KVA OBJECT IDENTIFIER ::= { galaxy 20 }
galaxy5000UPS50KVA OBJECT IDENTIFIER ::= { galaxy 21 }
galaxy5000UPS60KVA OBJECT IDENTIFIER ::= { galaxy 22 }
galaxy5000UPS80KVA OBJECT IDENTIFIER ::= { galaxy 23 }
galaxy5000UPS100KVA OBJECT IDENTIFIER ::= { galaxy 24 }
galaxy5000UPS120KVA OBJECT IDENTIFIER ::= { galaxy 25 }
galaxy5000UPS130KVA OBJECT IDENTIFIER ::= { galaxy 26 }
galaxy5500UPS20KVA OBJECT IDENTIFIER ::= { galaxy 27 }
galaxy5500UPS30KVA OBJECT IDENTIFIER ::= { galaxy 28 }
galaxy5500UPS40KVA OBJECT IDENTIFIER ::= { galaxy 29 }
galaxy5500UPS50KVA OBJECT IDENTIFIER ::= { galaxy 30 }
galaxy5500UPS60KVA OBJECT IDENTIFIER ::= { galaxy 31 }
galaxy5500UPS80KVA OBJECT IDENTIFIER ::= { galaxy 32 }
galaxy5500UPS100KVA OBJECT IDENTIFIER ::= { galaxy 33 }
galaxy5500UPS120KVA OBJECT IDENTIFIER ::= { galaxy 34 }
galaxy5500UPS130KVA OBJECT IDENTIFIER ::= { galaxy 35 }
galaxyVMUPS50kVA OBJECT IDENTIFIER ::= { galaxy 36 }
galaxyVMUPS60kVA OBJECT IDENTIFIER ::= { galaxy 37 }
galaxyVMUPS80kVA OBJECT IDENTIFIER ::= { galaxy 38 }
galaxyVMUPS90kVA OBJECT IDENTIFIER ::= { galaxy 39 }
galaxyVMUPS100kVA OBJECT IDENTIFIER ::= { galaxy 40 }
galaxyVMUPS110kVA OBJECT IDENTIFIER ::= { galaxy 41 }
galaxyVMUPS120kVA OBJECT IDENTIFIER ::= { galaxy 42 }
galaxyVMUPS130kVA OBJECT IDENTIFIER ::= { galaxy 43 }
galaxyVMUPS160kVA OBJECT IDENTIFIER ::= { galaxy 44 }
galaxyVMUPS180kVA OBJECT IDENTIFIER ::= { galaxy 45 }
galaxyVMUPS200kVA OBJECT IDENTIFIER ::= { galaxy 46 }
galaxyVMUPS225kVA OBJECT IDENTIFIER ::= { galaxy 47 }
galaxy9000UPS OBJECT IDENTIFIER ::= { galaxy 48 }
galaxy9000SSC OBJECT IDENTIFIER ::= { galaxy 49 }
galaxy9000UPSWithSSC OBJECT IDENTIFIER ::= { galaxy 50 }
galaxy9000FreqConverter OBJECT IDENTIFIER ::= { galaxy 51 }
galaxyVXUPS625kVA OBJECT IDENTIFIER ::= { galaxy 56 }
galaxyVXUPS750kVA OBJECT IDENTIFIER ::= { galaxy 57 }
galaxyVXUPS1000kVA OBJECT IDENTIFIER ::= { galaxy 58 }
galaxyVXUPS1250kVA OBJECT IDENTIFIER ::= { galaxy 59 }
galaxyVXUPS1500kVA OBJECT IDENTIFIER ::= { galaxy 60 }
galaxy300UPS60kVA33 OBJECT IDENTIFIER ::= { galaxy 61 }
galaxy300UPS80kVA33 OBJECT IDENTIFIER ::= { galaxy 62 }
galaxyVXUPS500kVA OBJECT IDENTIFIER ::= { galaxy 63 }
galaxyVXUPS250kVA OBJECT IDENTIFIER ::= { galaxy 64 }
galaxyVXUPS400kVA OBJECT IDENTIFIER ::= { galaxy 65 }
galaxyVSUPS100kW OBJECT IDENTIFIER ::= { galaxy 66 }
galaxy7000UPS160kVA OBJECT IDENTIFIER ::= { galaxy 67 }
galaxyVXUPS300kVA OBJECT IDENTIFIER ::= { galaxy 68 }
galaxyVXUPS1100kVA OBJECT IDENTIFIER ::= { galaxy 69 }
galaxyVSUPS10kW OBJECT IDENTIFIER ::= { galaxy 70 }
galaxyVSUPS15kW OBJECT IDENTIFIER ::= { galaxy 71 }
galaxyVSUPS20kW OBJECT IDENTIFIER ::= { galaxy 72 }
galaxyVSUPS25kW OBJECT IDENTIFIER ::= { galaxy 73 }
galaxyVSUPS30kW OBJECT IDENTIFIER ::= { galaxy 74 }
galaxyVSUPS40kW OBJECT IDENTIFIER ::= { galaxy 75 }
galaxyVSUPS50kW OBJECT IDENTIFIER ::= { galaxy 76 }
galaxyVSUPS60kW OBJECT IDENTIFIER ::= { galaxy 77 }
galaxyVSUPS75kW OBJECT IDENTIFIER ::= { galaxy 78 }
galaxyVSUPS80kW OBJECT IDENTIFIER ::= { galaxy 79 }
galaxyVSUPS120kW OBJECT IDENTIFIER ::= { galaxy 80 }
galaxyVSUPS150kW OBJECT IDENTIFIER ::= { galaxy 81 }
galaxyVXUPS800kVA OBJECT IDENTIFIER ::= { galaxy 82 }
galaxyPXUPS60kW OBJECT IDENTIFIER ::= { galaxy 83 }
galaxyPXUPS80kW OBJECT IDENTIFIER ::= { galaxy 84 }
galaxyPXUPS100kW OBJECT IDENTIFIER ::= { galaxy 85 }
galaxyVLUPS500kW OBJECT IDENTIFIER ::= { galaxy 86 }
eps6000UPS OBJECT IDENTIFIER ::= { eps 1 }
eps6000SSC OBJECT IDENTIFIER ::= { eps 2 }
eps6000UPSWithSSC OBJECT IDENTIFIER ::= { eps 3 }
eps6000FreqConverter OBJECT IDENTIFIER ::= { eps 4 }
eps7000UPS OBJECT IDENTIFIER ::= { eps 5 }
eps7000SSC OBJECT IDENTIFIER ::= { eps 6 }
eps7000UPSWithSSC OBJECT IDENTIFIER ::= { eps 7 }
eps7000FreqConverter OBJECT IDENTIFIER ::= { eps 8 }
eps8000UPS OBJECT IDENTIFIER ::= { eps 9 }
eps8000SSC OBJECT IDENTIFIER ::= { eps 10 }
eps8000UPSWithSSC OBJECT IDENTIFIER ::= { eps 11 }
eps8000FreqConverter OBJECT IDENTIFIER ::= { eps 12 }
pcns4 OBJECT IDENTIFIER ::= { pcns 1 }
pcnsIdent OBJECT IDENTIFIER ::= { powerChuteNetworkShutdown 1 }
pcnsNetworking OBJECT IDENTIFIER ::= { powerChuteNetworkShutdown 2 }
pcnsNMC OBJECT IDENTIFIER ::= { powerChuteNetworkShutdown 3 }
pcnsEvents OBJECT IDENTIFIER ::= { powerChuteNetworkShutdown 4 }
pcnsShutdown OBJECT IDENTIFIER ::= { powerChuteNetworkShutdown 5 }
pcnsAlarms OBJECT IDENTIFIER ::= { powerChuteNetworkShutdown 6 }
pcnsLoggingLevel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Override the Root Logging level for PCNS. Possible Values: CLEAR, DEBUG"
::= { powerChuteNetworkShutdown 7 }
pcbe9 OBJECT IDENTIFIER ::= { pcbe 1 }
pmm400kVA OBJECT IDENTIFIER ::= { pmm 1 }
pmm500kVA OBJECT IDENTIFIER ::= { pmm 2 }
rpp400kVA OBJECT IDENTIFIER ::= { rpp 1 }
rpp250kVA OBJECT IDENTIFIER ::= { rpp 2 }
pcbeIdent OBJECT IDENTIFIER ::= { powerChuteBusinessEdition 1 }
-- Deliberately leaving gap in the numbers so they are consistant with PCNS
pcbeAlarms OBJECT IDENTIFIER ::= { powerChuteBusinessEdition 6 }
conPortServAP930x OBJECT IDENTIFIER ::= { conPortServ 1 }
gutorPEW OBJECT IDENTIFIER ::= { gutor 1 }
gutorPDW OBJECT IDENTIFIER ::= { gutor 2 }
gutorWEW OBJECT IDENTIFIER ::= { gutor 3 }
gutorWDW OBJECT IDENTIFIER ::= { gutor 4 }
gutorSDC OBJECT IDENTIFIER ::= { gutor 5 }
gutorPXP OBJECT IDENTIFIER ::= { gutor 6 }
gutorPXC OBJECT IDENTIFIER ::= { gutor 7 }
upsIdent OBJECT IDENTIFIER ::= { ups 1 }
upsBattery OBJECT IDENTIFIER ::= { ups 2 }
upsInput OBJECT IDENTIFIER ::= { ups 3 }
upsOutput OBJECT IDENTIFIER ::= { ups 4 }
upsConfig OBJECT IDENTIFIER ::= { ups 5 }
upsControl OBJECT IDENTIFIER ::= { ups 6 }
upsTest OBJECT IDENTIFIER ::= { ups 7 }
upsComm OBJECT IDENTIFIER ::= { ups 8 }
upsPhase OBJECT IDENTIFIER ::= { ups 9 }
upsSyncCtrlGroup OBJECT IDENTIFIER ::= { ups 10 }
upsState OBJECT IDENTIFIER ::= { ups 11 }
upsOutletGroups OBJECT IDENTIFIER ::= { ups 12 }
upsDiagnostics OBJECT IDENTIFIER ::= { ups 13 }
upsParallelSystem OBJECT IDENTIFIER ::= { ups 14 }
upsPhysicalLayout OBJECT IDENTIFIER ::= { ups 15 }
upsIntegratedATS OBJECT IDENTIFIER ::= { ups 16 }
upsDCOutput OBJECT IDENTIFIER ::= { ups 17 }
upsIntegratedUIO OBJECT IDENTIFIER ::= { ups 18 }
upsEnergyEfficiency OBJECT IDENTIFIER ::= { ups 20 }
upsStatistics OBJECT IDENTIFIER ::= { ups 22 }
upsBasicIdent OBJECT IDENTIFIER ::= { upsIdent 1 }
upsAdvIdent OBJECT IDENTIFIER ::= { upsIdent 2 }
upsBasicBattery OBJECT IDENTIFIER ::= { upsBattery 1 }
upsAdvBattery OBJECT IDENTIFIER ::= { upsBattery 2 }
upsHighPrecBattery OBJECT IDENTIFIER ::= { upsBattery 3 }
upsBasicInput OBJECT IDENTIFIER ::= { upsInput 1 }
upsAdvInput OBJECT IDENTIFIER ::= { upsInput 2 }
upsHighPrecInput OBJECT IDENTIFIER ::= { upsInput 3 }
upsBasicOutput OBJECT IDENTIFIER ::= { upsOutput 1 }
upsAdvOutput OBJECT IDENTIFIER ::= { upsOutput 2 }
upsHighPrecOutput OBJECT IDENTIFIER ::= { upsOutput 3 }
upsBasicConfig OBJECT IDENTIFIER ::= { upsConfig 1 }
upsAdvConfig OBJECT IDENTIFIER ::= { upsConfig 2 }
upsBasicControl OBJECT IDENTIFIER ::= { upsControl 1 }
upsAdvControl OBJECT IDENTIFIER ::= { upsControl 2 }
upsBasicTest OBJECT IDENTIFIER ::= { upsTest 1 }
upsAdvTest OBJECT IDENTIFIER ::= { upsTest 2 }
upsPhaseResetValues OBJECT IDENTIFIER ::= { upsPhase 1 }
upsPhaseInput OBJECT IDENTIFIER ::= { upsPhase 2 }
upsPhaseOutput OBJECT IDENTIFIER ::= { upsPhase 3 }
upsSyncCtrlGroupConfig OBJECT IDENTIFIER ::= { upsSyncCtrlGroup 1 }
upsSyncCtrlGroupStatus OBJECT IDENTIFIER ::= { upsSyncCtrlGroup 2 }
upsBasicState OBJECT IDENTIFIER ::= { upsState 1 }
upsAdvState OBJECT IDENTIFIER ::= { upsState 2 }
upsOutletGroupStatus OBJECT IDENTIFIER ::= { upsOutletGroups 1 }
upsOutletGroupConfig OBJECT IDENTIFIER ::= { upsOutletGroups 2 }
upsOutletGroupControl OBJECT IDENTIFIER ::= { upsOutletGroups 3 }
upsDiagnosticIM OBJECT IDENTIFIER ::= { upsDiagnostics 1 }
upsDiagnosticPowerModules OBJECT IDENTIFIER ::= { upsDiagnostics 2 }
upsDiagnosticBatteries OBJECT IDENTIFIER ::= { upsDiagnostics 3 }
upsDiagnosticSubsystem OBJECT IDENTIFIER ::= { upsDiagnostics 4 }
upsDiagnosticExternalDevices OBJECT IDENTIFIER ::= { upsDiagnostics 5 }
upsDiagnosticComBus OBJECT IDENTIFIER ::= { upsDiagnostics 6 }
upsDiagnosticPowerCabinet OBJECT IDENTIFIER ::= { upsDiagnostics 7 }
upsDiagnosticDisplay OBJECT IDENTIFIER ::= { upsDiagnostics 8 }
upsDiagnosticUnitController OBJECT IDENTIFIER ::= { upsDiagnostics 9 }
upsDiagnosticSLC OBJECT IDENTIFIER ::= { upsDiagnostics 10 }
upsDiagnosticTemperature OBJECT IDENTIFIER ::= { upsDiagnostics 11 }
upsDiagSwitchGear OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 1 }
upsDiagMCCBBox OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 2 }
upsDiagTransformer OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 3 }
upsDiagFlyWheel OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 4 }
upsOutputRelays OBJECT IDENTIFIER ::= { upsIntegratedUIO 1 }
upsInputContacts OBJECT IDENTIFIER ::= { upsIntegratedUIO 2 }
upsECOmode OBJECT IDENTIFIER ::= { upsEnergyEfficiency 1 }
upsEBMmode OBJECT IDENTIFIER ::= { upsEnergyEfficiency 2 }
upsBatteryStats OBJECT IDENTIFIER ::= { upsStatistics 1 }
upsOperationalStats OBJECT IDENTIFIER ::= { upsStatistics 2 }
upsEnergyEfficiencyStats OBJECT IDENTIFIER ::= { upsStatistics 3 }
mUpsEnviron OBJECT IDENTIFIER ::= { measureUps 1 }
mUpsContact OBJECT IDENTIFIER ::= { measureUps 2 }
serialPort OBJECT IDENTIFIER ::= { miniSNMPadapter 1}
serialPort1 OBJECT IDENTIFIER ::= { serialPort 1}
serialPort2 OBJECT IDENTIFIER ::= { serialPort 2}
serialPort2Config OBJECT IDENTIFIER ::= { serialPort2 1}
serialPort2Control OBJECT IDENTIFIER ::= { serialPort2 2}
sPDUIdent OBJECT IDENTIFIER ::= { masterswitch 1 }
sPDUMasterControl OBJECT IDENTIFIER ::= { masterswitch 2 }
sPDUMasterConfig OBJECT IDENTIFIER ::= { masterswitch 3 }
sPDUOutletControl OBJECT IDENTIFIER ::= { masterswitch 4 }
sPDUOutletConfig OBJECT IDENTIFIER ::= { masterswitch 5 }
sPDUIdentVM OBJECT IDENTIFIER ::= { masterswitchVM 1 }
sPDUMasterControlVM OBJECT IDENTIFIER ::= { masterswitchVM 2 }
sPDUMasterConfigVM OBJECT IDENTIFIER ::= { masterswitchVM 3 }
sPDUMasterStatusVM OBJECT IDENTIFIER ::= { masterswitchVM 4 }
sPDUOutletControlVM OBJECT IDENTIFIER ::= { masterswitchVM 5 }
sPDUOutletConfigVM OBJECT IDENTIFIER ::= { masterswitchVM 6 }
sPDUOutletStatusVM OBJECT IDENTIFIER ::= { masterswitchVM 7 }
sPDUIdentMSP OBJECT IDENTIFIER ::= { masterswitchMSP 1 }
sPDUMasterControlMSP OBJECT IDENTIFIER ::= { masterswitchMSP 2 }
sPDUMasterConfigMSP OBJECT IDENTIFIER ::= { masterswitchMSP 3 }
sPDUMasterStatusMSP OBJECT IDENTIFIER ::= { masterswitchMSP 4 }
sPDUOutletControlMSP OBJECT IDENTIFIER ::= { masterswitchMSP 5 }
sPDUOutletConfigMSP OBJECT IDENTIFIER ::= { masterswitchMSP 6 }
sPDUOutletStatusMSP OBJECT IDENTIFIER ::= { masterswitchMSP 7 }
sPDUOutletConfigMSPall OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 1 }
sPDUOutletConfigMSPgs OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 2 }
sPDUOutletConfigMSPannun OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 3 }
sPDUOutletConfigMSPmups OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 4 }
rPDUIdent OBJECT IDENTIFIER ::= { rPDU 1 }
rPDULoad OBJECT IDENTIFIER ::= { rPDU 2 }
rPDUOutlet OBJECT IDENTIFIER ::= { rPDU 3 }
rPDUPowerSupply OBJECT IDENTIFIER ::= { rPDU 4 }
rPDUStatus OBJECT IDENTIFIER ::= { rPDU 5 }
rPDULoadDevice OBJECT IDENTIFIER ::= { rPDULoad 1 }
rPDULoadPhaseConfig OBJECT IDENTIFIER ::= { rPDULoad 2 }
rPDULoadStatus OBJECT IDENTIFIER ::= { rPDULoad 3 }
rPDULoadBankConfig OBJECT IDENTIFIER ::= { rPDULoad 4 }
rPDUOutletDevice OBJECT IDENTIFIER ::= { rPDUOutlet 1 }
rPDUOutletPhase OBJECT IDENTIFIER ::= { rPDUOutlet 2 }
rPDUOutletControl OBJECT IDENTIFIER ::= { rPDUOutlet 3 }
rPDUOutletConfig OBJECT IDENTIFIER ::= { rPDUOutlet 4 }
rPDUOutletStatus OBJECT IDENTIFIER ::= { rPDUOutlet 5 }
rPDUOutletBank OBJECT IDENTIFIER ::= { rPDUOutlet 6 }
rPDUPowerSupplyDevice OBJECT IDENTIFIER ::= { rPDUPowerSupply 1 }
dm3Ident OBJECT IDENTIFIER ::= { dcDM3 1 }
dm3Config OBJECT IDENTIFIER ::= { dcDM3 2 }
dm3Status OBJECT IDENTIFIER ::= { dcDM3 3 }
dm3IdentSystem OBJECT IDENTIFIER ::= { dm3Ident 1}
dm3ConfigSystem OBJECT IDENTIFIER ::= { dm3Config 1 }
dm3ConfigLVD OBJECT IDENTIFIER ::= { dm3Config 2 }
dm3ConfigBattery OBJECT IDENTIFIER ::= { dm3Config 3 }
dm3ConfigPowerModules OBJECT IDENTIFIER ::= { dm3Config 4 }
dm3ConfigRelays OBJECT IDENTIFIER ::= { dm3Config 5 }
dm3ConfigDistribution OBJECT IDENTIFIER ::= { dm3Config 6 }
dm3ConfigRectifier OBJECT IDENTIFIER ::= { dm3ConfigPowerModules 1 }
dm3ConfigConverter OBJECT IDENTIFIER ::= { dm3ConfigPowerModules 2 }
dm3ConfigRectThresh OBJECT IDENTIFIER ::= { dm3ConfigRectifier 1 }
dm3ConfigRectAlarms OBJECT IDENTIFIER ::= { dm3ConfigRectifier 2 }
dm3ConfigConvThresh OBJECT IDENTIFIER ::= { dm3ConfigConverter 1 }
dm3ConfigConvAlarms OBJECT IDENTIFIER ::= { dm3ConfigConverter 2 }
dm3ConfigOutputRelays OBJECT IDENTIFIER ::= { dm3ConfigRelays 1 }
dm3ConfigInputRelays OBJECT IDENTIFIER ::= { dm3ConfigRelays 2 }
dm3ConfigBreakers OBJECT IDENTIFIER ::= { dm3ConfigDistribution 1 }
dm3ConfigFuses OBJECT IDENTIFIER ::= { dm3ConfigDistribution 2 }
dm3StatusSystem OBJECT IDENTIFIER ::= { dm3Status 1 }
dm3StatusAlarms OBJECT IDENTIFIER ::= { dm3Status 2 }
dm3StatusBattery OBJECT IDENTIFIER ::= { dm3Status 3 }
dm3StatusOEM OBJECT IDENTIFIER ::= { dm3Status 4 }
dm3StatusLVD OBJECT IDENTIFIER ::= { dm3Status 5 }
dm3StatusPowerModules OBJECT IDENTIFIER ::= { dm3Status 6 }
dm3StatusRelays OBJECT IDENTIFIER ::= { dm3Status 7 }
dm3StatusDistribution OBJECT IDENTIFIER ::= { dm3Status 8 }
dm3StatusRectifier OBJECT IDENTIFIER ::= { dm3StatusPowerModules 1 }
dm3StatusConverter OBJECT IDENTIFIER ::= { dm3StatusPowerModules 2 }
dm3StatusOutputRelays OBJECT IDENTIFIER ::= { dm3StatusRelays 1 }
dm3StatusInputRelays OBJECT IDENTIFIER ::= { dm3StatusRelays 2 }
dm3StatusBreakers OBJECT IDENTIFIER ::= { dm3StatusDistribution 1 }
dm3StatusFuses OBJECT IDENTIFIER ::= { dm3StatusDistribution 2 }
atsIdent OBJECT IDENTIFIER ::= { automaticTransferSwitch 1 }
atsCalibration OBJECT IDENTIFIER ::= { automaticTransferSwitch 2 }
atsControl OBJECT IDENTIFIER ::= { automaticTransferSwitch 3 }
atsConfig OBJECT IDENTIFIER ::= { automaticTransferSwitch 4 }
atsStatus OBJECT IDENTIFIER ::= { automaticTransferSwitch 5 }
atsCalibrationInput OBJECT IDENTIFIER ::= { atsCalibration 1 }
atsCalibrationPowerSupply OBJECT IDENTIFIER ::= { atsCalibration 2 }
atsCalibrationOutput OBJECT IDENTIFIER ::= { atsCalibration 3 }
atsStatusDeviceStatus OBJECT IDENTIFIER ::= { atsStatus 1 }
atsStatusResetValues OBJECT IDENTIFIER ::= { atsStatus 2 }
atsStatusInput OBJECT IDENTIFIER ::= { atsStatus 3 }
atsStatusOutput OBJECT IDENTIFIER ::= { atsStatus 4 }
dcmim2Ident OBJECT IDENTIFIER ::= { dc2 1 }
dcmim2Control OBJECT IDENTIFIER ::= { dc2 2 }
dcmim2Config OBJECT IDENTIFIER ::= { dc2 3 }
dcmim2Status OBJECT IDENTIFIER ::= { dc2 4 }
dcmim2IdentSystem OBJECT IDENTIFIER ::= { dcmim2Ident 1 }
dcmim2ControlSystem OBJECT IDENTIFIER ::= { dcmim2Control 1 }
dcmim2ConfigSystem OBJECT IDENTIFIER ::= { dcmim2Config 1 }
dcmim2ConfigBattery OBJECT IDENTIFIER ::= { dcmim2Config 2 }
dcmim2ConfigLVD OBJECT IDENTIFIER ::= { dcmim2Config 3 }
dcmim2StatusSystem OBJECT IDENTIFIER ::= { dcmim2Status 1 }
dcmim2StatusRectifier OBJECT IDENTIFIER ::= { dcmim2Status 2 }
dcmim2StatusBattery OBJECT IDENTIFIER ::= { dcmim2Status 3 }
dcmim2StatusLVD OBJECT IDENTIFIER ::= { dcmim2Status 4 }
dcmim2StatusAlarms OBJECT IDENTIFIER ::= { dcmim2Status 5 }
external OBJECT IDENTIFIER ::= { environmentalMonitor 1 }
integrated OBJECT IDENTIFIER ::= { environmentalMonitor 2 }
envMgtSystem OBJECT IDENTIFIER ::= { environmentalMonitor 3 }
modEnvMgr OBJECT IDENTIFIER ::= { environmentalMonitor 4 }
envWireless OBJECT IDENTIFIER ::= { environmentalMonitor 5 }
emIdent OBJECT IDENTIFIER ::= { external 1 }
emConfig OBJECT IDENTIFIER ::= { external 2 }
emStatus OBJECT IDENTIFIER ::= { external 3 }
iemIdent OBJECT IDENTIFIER ::= { integrated 1 }
iemConfig OBJECT IDENTIFIER ::= { integrated 2 }
iemStatus OBJECT IDENTIFIER ::= { integrated 3 }
emsIdent OBJECT IDENTIFIER ::= { envMgtSystem 1 }
emsOutputRelayControl OBJECT IDENTIFIER ::= { envMgtSystem 2 }
emsOutletControl OBJECT IDENTIFIER ::= { envMgtSystem 3 }
emsSensorControl OBJECT IDENTIFIER ::= { envMgtSystem 4 }
emsAlarmDeviceControl OBJECT IDENTIFIER ::= { envMgtSystem 5 }
emsConfig OBJECT IDENTIFIER ::= { envMgtSystem 6 }
emsProbeConfig OBJECT IDENTIFIER ::= { envMgtSystem 7 }
emsInputContactConfig OBJECT IDENTIFIER ::= { envMgtSystem 8 }
emsOutputRelayConfig OBJECT IDENTIFIER ::= { envMgtSystem 9 }
emsOutletConfig OBJECT IDENTIFIER ::= { envMgtSystem 10 }
emsSensorConfig OBJECT IDENTIFIER ::= { envMgtSystem 11 }
emsStatus OBJECT IDENTIFIER ::= { envMgtSystem 12 }
emsProbeStatus OBJECT IDENTIFIER ::= { envMgtSystem 13 }
emsInputContactStatus OBJECT IDENTIFIER ::= { envMgtSystem 14 }
emsOutputRelayStatus OBJECT IDENTIFIER ::= { envMgtSystem 15 }
emsOutletStatus OBJECT IDENTIFIER ::= { envMgtSystem 16 }
emsAlarmDeviceStatus OBJECT IDENTIFIER ::= { envMgtSystem 17 }
emsSensorStatus OBJECT IDENTIFIER ::= { envMgtSystem 18 }
emsInputStateSensorConfig OBJECT IDENTIFIER ::= { envMgtSystem 19 }
emsInputStateSensorStatus OBJECT IDENTIFIER ::= { envMgtSystem 20 }
memModules OBJECT IDENTIFIER ::= { modEnvMgr 1 }
memSensors OBJECT IDENTIFIER ::= { modEnvMgr 2 }
memInputs OBJECT IDENTIFIER ::= { modEnvMgr 3 }
memOutputs OBJECT IDENTIFIER ::= { modEnvMgr 4 }
memOutlets OBJECT IDENTIFIER ::= { modEnvMgr 5 }
memBeacons OBJECT IDENTIFIER ::= { modEnvMgr 6 }
memInputStateSensors OBJECT IDENTIFIER ::= { modEnvMgr 7 }
wirelessSensorStatus OBJECT IDENTIFIER ::= { envWireless 1 }
wirelessSensorPodStatus OBJECT IDENTIFIER ::= { envWireless 2 }
wirelessSensorConfig OBJECT IDENTIFIER ::= { envWireless 3 }
wirelessSensorPodConfig OBJECT IDENTIFIER ::= { envWireless 4 }
nlIdent OBJECT IDENTIFIER ::= { netlock 1 }
nlStatus OBJECT IDENTIFIER ::= { netlock 2 }
airFM OBJECT IDENTIFIER ::= { airConditioners 1 }
airFMIdent OBJECT IDENTIFIER ::= { airFM 1 }
airFMStatus OBJECT IDENTIFIER ::= { airFM 2 }
airFMGroup OBJECT IDENTIFIER ::= { airFM 3 }
airFMSystem OBJECT IDENTIFIER ::= { airFM 4 }
airFMModule OBJECT IDENTIFIER ::= { airFM 5 }
airFMAlarms OBJECT IDENTIFIER ::= { airFM 6 }
airFMGroupSysRoles OBJECT IDENTIFIER ::= { airFMGroup 4 }
airFMGroupCfg OBJECT IDENTIFIER ::= { airFMGroup 5 }
airFMGroupLoadShare OBJECT IDENTIFIER ::= { airFMGroup 6 }
airFMGroupFailover OBJECT IDENTIFIER ::= { airFMGroup 7 }
airFMGroupFailoverSys OBJECT IDENTIFIER ::= { airFMGroupFailover 1 }
airFMGroupFailoverMod OBJECT IDENTIFIER ::= { airFMGroupFailover 2 }
airFMSysStatus OBJECT IDENTIFIER ::= { airFMSystem 1 }
airFMSysDemands OBJECT IDENTIFIER ::= { airFMSystem 2 }
airFMSysSetup OBJECT IDENTIFIER ::= { airFMSystem 3 }
airFMSysConfig OBJECT IDENTIFIER ::= { airFMSystem 4 }
airFMSysCooling OBJECT IDENTIFIER ::= { airFMSystem 5 }
airFMSysHumidify OBJECT IDENTIFIER ::= { airFMSystem 6 }
airFMSysDehumidify OBJECT IDENTIFIER ::= { airFMSystem 7 }
airFMSysReheat OBJECT IDENTIFIER ::= { airFMSystem 8 }
airFMSysThresholds OBJECT IDENTIFIER ::= { airFMSystem 9 }
airFMSysInputs OBJECT IDENTIFIER ::= { airFMSystem 10 }
airFMSysOutputs OBJECT IDENTIFIER ::= { airFMSystem 11 }
airFMSysAlarmMap OBJECT IDENTIFIER ::= { airFMSystem 12 }
airFMSysAlarmMapSys OBJECT IDENTIFIER ::= { airFMSysAlarmMap 1 }
airFMSysAlarmMapMainMod OBJECT IDENTIFIER ::= { airFMSysAlarmMap 2 }
airFMSysAlarmMapExpMod1 OBJECT IDENTIFIER ::= { airFMSysAlarmMap 3 }
airFMSysAlarmMapExpMod2 OBJECT IDENTIFIER ::= { airFMSysAlarmMap 4 }
airFMSysAlarmMapInput OBJECT IDENTIFIER ::= { airFMSysAlarmMap 5 }
airFMSysAlarmMapOutput OBJECT IDENTIFIER ::= { airFMSysAlarmMap 6 }
airFMModIdent OBJECT IDENTIFIER ::= { airFMModule 1 }
airFMModStatus OBJECT IDENTIFIER ::= { airFMModule 2 }
airFMModProperties OBJECT IDENTIFIER ::= { airFMModule 3 }
airFMModCooling OBJECT IDENTIFIER ::= { airFMModule 4 }
airFMModHumidity OBJECT IDENTIFIER ::= { airFMModule 5 }
airFMModBlower1 OBJECT IDENTIFIER ::= { airFMModule 6 }
airFMModBlower2 OBJECT IDENTIFIER ::= { airFMModule 7 }
airFMModRunHours OBJECT IDENTIFIER ::= { airFMModule 8 }
airFMModServIntervals OBJECT IDENTIFIER ::= { airFMModule 9 }
airFMModServIntResets OBJECT IDENTIFIER ::= { airFMModule 10 }
airPA OBJECT IDENTIFIER ::= { airConditioners 2 }
airPAIdent OBJECT IDENTIFIER ::= { airPA 1 }
airPAStatus OBJECT IDENTIFIER ::= { airPA 2 }
airIR OBJECT IDENTIFIER ::= { airConditioners 3 }
airIRAlarms OBJECT IDENTIFIER ::= { airIR 1 }
airIRRC OBJECT IDENTIFIER ::= { airIR 2 }
airIRRP OBJECT IDENTIFIER ::= { airIR 3 }
airIRSC OBJECT IDENTIFIER ::= { airIR 4 }
airIRRCGroup OBJECT IDENTIFIER ::= { airIRRC 1 }
airIRRCUnit OBJECT IDENTIFIER ::= { airIRRC 2 }
airIRRCGroupStatus OBJECT IDENTIFIER ::= { airIRRCGroup 1 }
airIRRCGroupSetpoints OBJECT IDENTIFIER ::= { airIRRCGroup 2 }
airIRRCGroupConfig OBJECT IDENTIFIER ::= { airIRRCGroup 3 }
airIRRCUnitIdent OBJECT IDENTIFIER ::= { airIRRCUnit 1 }
airIRRCUnitStatus OBJECT IDENTIFIER ::= { airIRRCUnit 2 }
airIRRCUnitRunHours OBJECT IDENTIFIER ::= { airIRRCUnit 3 }
airIRRCUnitServiceIntervals OBJECT IDENTIFIER ::= { airIRRCUnit 4 }
airIRRCUnitThresholds OBJECT IDENTIFIER ::= { airIRRCUnit 5 }
airIRRCUnitConfig OBJECT IDENTIFIER ::= { airIRRCUnit 6 }
-- Series 100 DX Air Conditioners
airIRRP100 OBJECT IDENTIFIER ::= { airIRRP 1 }
-- Series 500 CW Air Conditioners
airIRRP500 OBJECT IDENTIFIER ::= { airIRRP 2 }
airIRRP100Group OBJECT IDENTIFIER ::= { airIRRP100 1 }
airIRRP100Unit OBJECT IDENTIFIER ::= { airIRRP100 2 }
airIRRP100GroupStatus OBJECT IDENTIFIER ::= { airIRRP100Group 1 }
airIRRP100GroupSetpoints OBJECT IDENTIFIER ::= { airIRRP100Group 2 }
airIRRP100GroupConfig OBJECT IDENTIFIER ::= { airIRRP100Group 3 }
airIRRP100UnitIdent OBJECT IDENTIFIER ::= { airIRRP100Unit 1 }
airIRRP100UnitStatus OBJECT IDENTIFIER ::= { airIRRP100Unit 2 }
airIRRP100UnitRunHours OBJECT IDENTIFIER ::= { airIRRP100Unit 3 }
airIRRP100UnitServiceIntervals OBJECT IDENTIFIER ::= { airIRRP100Unit 4 }
airIRRP100UnitThresholds OBJECT IDENTIFIER ::= { airIRRP100Unit 5 }
airIRRP100UnitConfig OBJECT IDENTIFIER ::= { airIRRP100Unit 6 }
airIRRP500Group OBJECT IDENTIFIER ::= { airIRRP500 1 }
airIRRP500Unit OBJECT IDENTIFIER ::= { airIRRP500 2 }
airIRRP500GroupStatus OBJECT IDENTIFIER ::= { airIRRP500Group 1 }
airIRRP500GroupSetpoints OBJECT IDENTIFIER ::= { airIRRP500Group 2 }
airIRRP500GroupConfig OBJECT IDENTIFIER ::= { airIRRP500Group 3 }
airIRRP500UnitIdent OBJECT IDENTIFIER ::= { airIRRP500Unit 1 }
airIRRP500UnitStatus OBJECT IDENTIFIER ::= { airIRRP500Unit 2 }
airIRRP500UnitRunHours OBJECT IDENTIFIER ::= { airIRRP500Unit 3 }
airIRRP500UnitServiceIntervals OBJECT IDENTIFIER ::= { airIRRP500Unit 4 }
airIRRP500UnitThresholds OBJECT IDENTIFIER ::= { airIRRP500Unit 5 }
airIRRP500UnitConfig OBJECT IDENTIFIER ::= { airIRRP500Unit 6 }
airIRSCUnit OBJECT IDENTIFIER ::= { airIRSC 1 }
airIRSCUnitIdent OBJECT IDENTIFIER ::= { airIRSCUnit 1 }
airIRSCUnitStatus OBJECT IDENTIFIER ::= { airIRSCUnit 2 }
airIRSCUnitRunHours OBJECT IDENTIFIER ::= { airIRSCUnit 3 }
airIRSCUnitServiceIntervals OBJECT IDENTIFIER ::= { airIRSCUnit 4 }
airIRSCUnitThresholds OBJECT IDENTIFIER ::= { airIRSCUnit 5 }
airIRSCUnitSetpoints OBJECT IDENTIFIER ::= { airIRSCUnit 6 }
airIRSCUnitConfig OBJECT IDENTIFIER ::= { airIRSCUnit 7 }
airIRSCGroup OBJECT IDENTIFIER ::= { airIRSC 2 }
airIRSCGroupStatus OBJECT IDENTIFIER ::= { airIRSCGroup 1 }
airIRSCGroupSetpoints OBJECT IDENTIFIER ::= { airIRSCGroup 2 }
airIRSCGroupConfig OBJECT IDENTIFIER ::= { airIRSCGroup 3 }
airIRGen2 OBJECT IDENTIFIER ::= { airConditioners 4 }
airIRG2Ident OBJECT IDENTIFIER ::= { airIRGen2 1 }
airIRG2Group OBJECT IDENTIFIER ::= { airIRGen2 2 }
airIRG2Alarms OBJECT IDENTIFIER ::= { airIRGen2 3 }
airIRG2RC OBJECT IDENTIFIER ::= { airIRGen2 4 }
airIRG2RD OBJECT IDENTIFIER ::= { airIRGen2 5 }
airIRG2SC OBJECT IDENTIFIER ::= { airIRGen2 6 }
airIRG2RA OBJECT IDENTIFIER ::= { airIRGen2 7 }
-- airIR Gen2 Group data
airIRG2GroupStatus OBJECT IDENTIFIER ::= { airIRG2Group 1 }
airIRG2GroupSetpoints OBJECT IDENTIFIER ::= { airIRG2Group 2 }
airIRG2GroupConfig OBJECT IDENTIFIER ::= { airIRG2Group 3 }
-- airIR Gen2 RD Unit data
airIRG2RDType1 OBJECT IDENTIFIER ::= { airIRG2RD 1 }
airIRG2RDType2 OBJECT IDENTIFIER ::= { airIRG2RD 2 }
airIRG2RDT2Status OBJECT IDENTIFIER ::= { airIRG2RDType2 1 }
airIRG2RDT2RunHours OBJECT IDENTIFIER ::= { airIRG2RDType2 2 }
airIRG2RDT2ServiceIntervals OBJECT IDENTIFIER ::= { airIRG2RDType2 3 }
airIRG2RDT2Thresholds OBJECT IDENTIFIER ::= { airIRG2RDType2 4 }
airIRG2RDT2Setpoints OBJECT IDENTIFIER ::= { airIRG2RDType2 5 }
airIRG2RDT2Config OBJECT IDENTIFIER ::= { airIRG2RDType2 6 }
airInRoom OBJECT IDENTIFIER ::= { airConditioners 5 }
airIRmIdent OBJECT IDENTIFIER ::= { airInRoom 1 }
airIRmAlarms OBJECT IDENTIFIER ::= { airInRoom 2 }
airIRmPerimeter OBJECT IDENTIFIER ::= { airInRoom 3 }
airIRmPmCommon1 OBJECT IDENTIFIER ::= { airIRmPerimeter 2 }
airIRmPmCommon2 OBJECT IDENTIFIER ::= { airIRmPerimeter 3 }
airIRmPmCommon3 OBJECT IDENTIFIER ::= { airIRmPerimeter 4 }
airIRmPmCommon4 OBJECT IDENTIFIER ::= { airIRmPerimeter 5 }
airIRmPmCommon5 OBJECT IDENTIFIER ::= { airIRmPerimeter 6 }
airIRmPmCompressor1 OBJECT IDENTIFIER ::= { airIRmPerimeter 7 }
airIRmPmCompressor2 OBJECT IDENTIFIER ::= { airIRmPerimeter 8 }
airIRmPmSuctionValve1 OBJECT IDENTIFIER ::= { airIRmPerimeter 9 }
airIRmPmSuctionValve2 OBJECT IDENTIFIER ::= { airIRmPerimeter 10 }
airIRmPmEheating1 OBJECT IDENTIFIER ::= { airIRmPerimeter 11 }
airIRmPmEheating2 OBJECT IDENTIFIER ::= { airIRmPerimeter 12 }
airIRmPmEheating3 OBJECT IDENTIFIER ::= { airIRmPerimeter 13 }
airIRmPmEheating4 OBJECT IDENTIFIER ::= { airIRmPerimeter 14 }
airIRmPmGECWvalve OBJECT IDENTIFIER ::= { airIRmPerimeter 15 }
airIRmPmGvalve OBJECT IDENTIFIER ::= { airIRmPerimeter 16 }
airIRmPmDrycooler1 OBJECT IDENTIFIER ::= { airIRmPerimeter 17 }
airIRmPmDrycooler2 OBJECT IDENTIFIER ::= { airIRmPerimeter 18 }
airIRmPmDrycooler3 OBJECT IDENTIFIER ::= { airIRmPerimeter 19 }
airIRmPmDrycooler4 OBJECT IDENTIFIER ::= { airIRmPerimeter 20 }
airIRmPmPump1 OBJECT IDENTIFIER ::= { airIRmPerimeter 21 }
airIRmPmPump2 OBJECT IDENTIFIER ::= { airIRmPerimeter 22 }
airIRmPmPump3 OBJECT IDENTIFIER ::= { airIRmPerimeter 23 }
airIRmPmPump4 OBJECT IDENTIFIER ::= { airIRmPerimeter 24 }
airIRmPmHotgasHeating OBJECT IDENTIFIER ::= { airIRmPerimeter 25 }
airIRmPmPWWHeating OBJECT IDENTIFIER ::= { airIRmPerimeter 26 }
airIRmPmHumidifier1 OBJECT IDENTIFIER ::= { airIRmPerimeter 27 }
airIRmPmHumidifier2 OBJECT IDENTIFIER ::= { airIRmPerimeter 28 }
-- Skipping 29 and 30.
airIRmPmDehumidification OBJECT IDENTIFIER ::= { airIRmPerimeter 31 }
airIRmPmFan1 OBJECT IDENTIFIER ::= { airIRmPerimeter 32 }
airIRmPmFan2 OBJECT IDENTIFIER ::= { airIRmPerimeter 33 }
airIRmPmFan3 OBJECT IDENTIFIER ::= { airIRmPerimeter 34 }
airIRmPmLouver1 OBJECT IDENTIFIER ::= { airIRmPerimeter 35 }
airIRmPmLouver2 OBJECT IDENTIFIER ::= { airIRmPerimeter 36 }
airIRmPmLouver3 OBJECT IDENTIFIER ::= { airIRmPerimeter 37 }
airIRmPmAuxAlarm1 OBJECT IDENTIFIER ::= { airIRmPerimeter 38 }
airIRmPmAuxAlarm2 OBJECT IDENTIFIER ::= { airIRmPerimeter 39 }
airIRmPmAuxAlarm3 OBJECT IDENTIFIER ::= { airIRmPerimeter 40 }
airIRmPmAuxAlarm4 OBJECT IDENTIFIER ::= { airIRmPerimeter 41 }
airIRmPmAuxAlarm5 OBJECT IDENTIFIER ::= { airIRmPerimeter 42 }
airIRmPmAlarmBits OBJECT IDENTIFIER ::= { airIRmPerimeter 43 }
airIRmPmMyZone OBJECT IDENTIFIER ::= { airIRmPerimeter 44 }
airIRmPmGlobalZoneData OBJECT IDENTIFIER ::= { airIRmPerimeter 45 }
airIRGen3 OBJECT IDENTIFIER ::= { airConditioners 6 }
airIRG3Ident OBJECT IDENTIFIER ::= { airIRGen3 1 }
airIRG3Group OBJECT IDENTIFIER ::= { airIRGen3 2 }
airIRG3Alarms OBJECT IDENTIFIER ::= { airIRGen3 3 }
airIRG3RDU OBJECT IDENTIFIER ::= { airIRGen3 4 }
airIRG3CM OBJECT IDENTIFIER ::= { airIRGen3 5 }
rARUIdent OBJECT IDENTIFIER ::= { rARU 1 }
rARUConfig OBJECT IDENTIFIER ::= { rARU 2 }
rARUStatus OBJECT IDENTIFIER ::= { rARU 3 }
rARUFanStatus OBJECT IDENTIFIER ::= { rARU 4 }
rARUPower OBJECT IDENTIFIER ::= { rARU 5 }
rARUSensors OBJECT IDENTIFIER ::= { rARU 6 }
accessPX OBJECT IDENTIFIER ::= { accessControl 1 }
accessPXIdent OBJECT IDENTIFIER ::= { accessPX 1 }
accessPXConfig OBJECT IDENTIFIER ::= { accessPX 2 }
accessPXConfigFront OBJECT IDENTIFIER ::= { accessPX 3 }
accessPXStatusFront OBJECT IDENTIFIER ::= { accessPX 4 }
accessPXConfigRear OBJECT IDENTIFIER ::= { accessPX 5 }
accessPXStatusRear OBJECT IDENTIFIER ::= { accessPX 6 }
accessPXConfigBeacon OBJECT IDENTIFIER ::= { accessPX 7 }
accessPXStatusBeacon OBJECT IDENTIFIER ::= { accessPX 8 }
apcLocalDisplayIdent OBJECT IDENTIFIER ::= { apcLocalDisplay 1 }
apcLocalDisplayConfig OBJECT IDENTIFIER ::= { apcLocalDisplay 2 }
accPX OBJECT IDENTIFIER ::= { accControl 1 }
isxModularPduIdent OBJECT IDENTIFIER ::= { isxModularPdu 1 }
isxModularPduDevice OBJECT IDENTIFIER ::= { isxModularPdu 2 }
isxModularPduStatus OBJECT IDENTIFIER ::= { isxModularPdu 3 }
symmetraPx48kVA OBJECT IDENTIFIER ::= { symmetraPX 1 }
symmetraPx160kVA OBJECT IDENTIFIER ::= { symmetraPX 2 }
symmetraPx250kVA OBJECT IDENTIFIER ::= { symmetraPX 3 }
symmetraPx500kVA OBJECT IDENTIFIER ::= { symmetraPX 4 }
symmetraPx100kVA OBJECT IDENTIFIER ::= { symmetraPX 5 }
symmetraPxDisplay OBJECT IDENTIFIER ::= { symmetraPX 6 }
isx24ModuleHalfRackPdu OBJECT IDENTIFIER ::= { isxModDistribution 1 }
isx6ModuleRackPdu OBJECT IDENTIFIER ::= { isxModDistribution 2 }
isxModularDistInfo OBJECT IDENTIFIER ::= { isxModularDistribution 1 }
isxModularDistModules OBJECT IDENTIFIER ::= { isxModularDistribution 2 }
isxModularDistSubFeeds OBJECT IDENTIFIER ::= { isxModularDistribution 3 }
isxModularDistTotals OBJECT IDENTIFIER ::= { isxModularDistribution 4 }
isxModularDistSysVoltage OBJECT IDENTIFIER ::= { isxModularDistTotals 1 }
isxModularDistSysCurrent OBJECT IDENTIFIER ::= { isxModularDistTotals 2 }
isxModularDistSysPower OBJECT IDENTIFIER ::= { isxModularDistTotals 3 }
isxcBasic OBJECT IDENTIFIER ::= { isxServers 1 }
isxcStandard OBJECT IDENTIFIER ::= { isxServers 2 }
isxcEnterprise OBJECT IDENTIFIER ::= { isxServers 3 }
isxcVirtual OBJECT IDENTIFIER ::= { isxServers 4 }
uioSensor OBJECT IDENTIFIER ::= { universalInputOutput 1 }
uioInputContact OBJECT IDENTIFIER ::= { universalInputOutput 2 }
uioOutputRelay OBJECT IDENTIFIER ::= { universalInputOutput 3 }
-- object types
-- the products group
-- the experimental group
-- the apcmgmt group
-- the mconfig group
mconfigNumTrapReceivers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of managers to send traps to."
::= { mconfig 1 }
mconfigTrapReceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF MconfigTrapReceiverEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of managers to send traps to. The number of
entries is given by the value of mconfigNumTrapReceivers."
::= { mconfig 2 }
mconfigTrapReceiverEntry OBJECT-TYPE
SYNTAX MconfigTrapReceiverEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The managers to send traps to."
INDEX { trapIndex}
::= { mconfigTrapReceiverTable 1 }
MconfigTrapReceiverEntry ::=
SEQUENCE {
trapIndex
INTEGER,
receiverAddr
IpAddress,
communityString
DisplayString,
severity
INTEGER,
acceptThisReceiver
INTEGER,
receiveTrapType
INTEGER
}
trapIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to a trap receiver entry."
::= { mconfigTrapReceiverEntry 1 }
receiverAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the manager to send a trap to."
::= { mconfigTrapReceiverEntry 2 }
communityString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The community name to use in the trap when
sent to the manager."
::= { mconfigTrapReceiverEntry 3 }
severity OBJECT-TYPE
SYNTAX INTEGER {
information(1),
warning(2),
severe(3)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The severity threshold of traps to send to the manager.
traps are labeled in severity as informational(1), warning(2),
severe(3). Only traps of equal or greater severity than
this value are sent to the manager."
::= { mconfigTrapReceiverEntry 4 }
acceptThisReceiver OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of yes(1) indicates that trap generation for this manager is enabled.
The value of no(2) indicates that trap generation for this manager is disabled"
::= { mconfigTrapReceiverEntry 5 }
receiveTrapType OBJECT-TYPE
SYNTAX INTEGER {
powernet (1),
ietf (2),
both (3)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Type of trap."
::= { mconfigTrapReceiverEntry 6 }
mconfigBOOTPEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of yes(1) indicates the PowerNet Adapter is configured to
obtain its IP configuration parameters from a BOOTP server.
The value of no(2) indicates adapter will assume IP configuration parameters
values saved in adapter's eeprom, which was originally configured at local
console."
::= { mconfig 3 }
mconfigTFTPServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of TFTP server. If mconfigBOOTPEnabled is yes(1), then this IP address
is provided by BOOTP server and not allowed to be modified; otherwise, this IP address
can be modified.
Before using TFTP to load new code image, the image file should be placed in proper
directory of the specified TFTP server. This OID is only supported by APC Network
Management Cards."
::= { mconfig 4 }
newCodeAuthentViaTFTP OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
validNewAgentCodeImage (2),
sameAgentCodeImage (3),
invalidAgentCodeImage (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Once mcontrolRestartAgent is set to loadAndExecuteNewAgent (3), PowerNet adapter will
start to load the remote image file, for authentication only, instead of saving the code
into flash memory. Only if a validNewAgentCodeImage (1) is found will the agent reboot
the PowerNet adapter and invoke the loader to load and save new code into the flash memory.
Otherwise, the current agent code will continue to run.
This OID shows the result of the above authentication process.
validNewAgentCodeImage (1) means the code image on TFTP server
is a valid APC agent code and is different version from the current agent.
Once agent identifies this, loader will start to update flash memory with
the new agent code.
sameAgentCodeImage (2) means the code image on TFTP server is exactly the
same as the currently running agent. Currently running agent will not invoke
loader to load the same again.
invalidAgentCodeImage (3) means the code image on TFTP server is NOT a valid
APC agent code. Thus, current agent will not load it into the flash memory.
The value of this OID will be associated with TRAP codeImageAuthentDone.
This OID is only supported by APC Network Management Cards."
::= { mconfig 5 }
mconfigClockDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current date in the mm/dd/yyyy format. Example: 01/01/2000."
::= { mconfigClock 1 }
mconfigClockTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current time in the hh:mm:ss am/pm format. Example: 12:00:00 am."
::= { mconfigClock 2 }
mcontrolRestartAgent OBJECT-TYPE
SYNTAX INTEGER {
restartCurrentAgent (1),
continueCurrentAgent (2),
loadAndExecuteNewAgent (3),
restartWithoutAgent (4),
resetNetworkAndRestart (5),
resetNetworkLeaveModeAndRestart (6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to restartCurrentAgent (1) will restart the same SNMP
agent code currently saved in flash memory. Setting this OID to
loadAndExecuteNewAgent (3) will enable adapter to load a new agent code
into the flash memory and start to execute this new agent code.
Bootp/tftp is the default protocol. loadAndExecuteNewAgent is only
supported by APC Network Management Cards. Setting
this OID to restartWithoutAgent (4) will restart the system and not
start the agent. The subsequent time the system restarts the agent will
also automatically restart. Setting this OID to
resetNetworkAndRestart (5) will set the Boot Mode, IP Address, Subnet
Mask, and Default Gateway to defaults, expire any existing DHCP lease
and then restart the system. Setting this OID to
resetNetworkLeaveModeAndRestart (6) will leave the Boot Mode at the
current setting, set the IP Address, Subnet Mask, and Default Gateway to
defaults, expire any existing DHCP lease and then restart the system."
::= { mcontrol 1 }
-- The mtrapargs group
-- These OIDs allows APC traps to be sent with additional arguments
-- which may not be defined in the APC MIB.
mtrapargsInteger OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an integer argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 1 }
mtrapargsIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an IP address argument
that my not be defined in the APC MIB.
A get of this OID will return 0.0.0.0."
::= { mtrapargs 2 }
mtrapargsString OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 3 }
mtrapargsGauge OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with a Gauge argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 4 }
mtrapargsTimeTicks OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with a TimeTicks argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 5 }
mtrapargsInteger02 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an integer argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 6 }
mtrapargsInteger03 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an integer argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 7 }
mtrapargsIpAddress02 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an IP address argument
that my not be defined in the APC MIB.
A get of this OID will return 0.0.0.0."
::= { mtrapargs 8 }
mtrapargsIpAddress03 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an IP address argument
that my not be defined in the APC MIB.
A get of this OID will return 0.0.0.0."
::= { mtrapargs 9 }
mtrapargsString02 OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 10 }
mtrapargsString03 OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 11 }
mtrapargsGauge02 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with a Gauge argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 12 }
mtrapargsGauge03 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with a Gauge argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 13 }
mtrapargsTimeTicks02 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with a TimeTicks argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 14 }
mtrapargsTimeTicks03 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with a TimeTicks argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 15 }
mtrapargsString04 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 16 }
mtrapargsString05 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 17 }
mtrapargsInteger04 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an integer argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 18 }
mtrapargsInteger05 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an integer argument
that my not be defined in the APC MIB.
A get of this OID will return 0."
::= { mtrapargs 19 }
mtrapargsString06 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 20 }
mtrapargsString07 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 21 }
mtrapargsString08 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 22 }
mtrapargsOctetString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 23 }
mtrapargsOctetString02 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 24 }
mtrapargsOctetString03 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 25 }
mtrapargsOctetString04 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 26 }
mtrapargsOctetString05 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 27 }
mtrapargsOctetString06 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 28 }
mtrapargsOctetString07 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 29 }
mtrapargsOctetString08 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID allows APC traps to be sent with an octet string argument
that my not be defined in the APC MIB.
A get of this OID will return a NULL string."
::= { mtrapargs 30 }
-- the mfiletransfer group
-- the mfiletransferStatus group
mfiletransferStatusLastTransferResult OBJECT-TYPE
SYNTAX INTEGER {
lastFileTransferResultSuccessful (1),
lastFileTransferResultNotAvailable (2),
lastFileTransferResultFailureUnknown (3),
lastFileTransferResultFailureServerInaccessible (4),
lastFileTransferResultFailureServerAccessDenied (5),
lastFileTransferResultFailureFileNotFound (6),
lastFileTransferResultFailureFileTypeUnknown (7),
lastFileTransferResultFailureFileCorrupted (8)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
Once mfiletransferControlInitiateFileTransfer is set to a value other than doNotInitiateFileTransfer
a file transfer of mfiletransferConfigSettingsFilename will be attempted from either a TFTP or FTP
server.
This OID shows the last attempted file transfer result.
lastFileTransferResultSuccessful (1) means the file transfer was successful.
lastFileTransferResultNotAvailable (2) means that there have been no previous file transfers.
lastFileTransferResultFailureUnknown (3) means that the last file transfer failed for an unknown reason.
lastFileTransferResultFailureServerInaccessible (4) means that the TFTP or FTP server could not be found on the network.
lastFileTransferResultFailureServerAccessDenied (5) means that the TFTP or FTP server denied access.
lastFileTransferResultFailureFileNotFound (6) means that the file could not be located.
lastFileTransferResultFailureFileTypeUnknown (7) means the file was examined, but the contents were unknown.
lastFileTransferResultFailureFileCorrupt (8) means the transferred file was corrupt."
::= { mfiletransferStatus 1 }
-- the mfiletransferConfig group
-- the mfiletransferConfigSettings group
mfiletransferConfigSettingsFilename OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
The path and name of the file to transfer using the mfiletransferControlInitiateFileTransfer OID.
If the file to transfer exists in the default server directory then the path may be omitted."
::= { mfiletransferConfigSettings 1 }
-- the mfiletransferConfigTFTP group
mfiletransferConfigTFTPServerAddress OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
The IP Address in dotted decimal notation of the TFTP server involved in the file transfer."
::= { mfiletransferConfigTFTP 1 }
-- the mfiletransferConfigFTP group
mfiletransferConfigFTPServerAddress OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
The IP Address in dotted decimal notation of the FTP server involved in the file transfer."
::= { mfiletransferConfigFTP 1 }
mfiletransferConfigFTPServerUser OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
The user identification for logging into the FTP server specified with mfiletransferConfigFTPServerAddress."
::= { mfiletransferConfigFTP 2 }
mfiletransferConfigFTPServerPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
The password for logging into the FTP server specified with mfiletransferConfigFTPServerAddress."
::= { mfiletransferConfigFTP 3 }
-- the mfiletransferControl group
mfiletransferControlInitiateFileTransfer OBJECT-TYPE
SYNTAX INTEGER {
doNotInitiateFileTransfer (1),
initiateFileTransferDownloadViaTFTP (2),
initiateFileTransferDownloadViaFTP (3)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated.
Setting this OID to doNotInitiateFileTransfer (1) will do nothing.
Setting this OID to initiateFileTransferDownloadViaTFTP (2) will attempt to transfer the file named in
mfiletransferConfigSettingsFilename from the TFTP Server identified in mfiletransferConfigTFTPAddress.
Setting this OID to initiateFileTransferDownloadViaFTP (3) will attempt to transfer the file named in
mfiletransferConfigSettingsFilename from the FTP Server identified in mfiletransferConfigFTPAddress
using mfiletransferConfigFTPUser and mfiletransferConfigFTPPassword for the FTP Server login process."
::= { mfiletransferControl 1 }
-- the battManIdent group
battManIdentProductName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the battery manager."
::= { battManIdent 1 }
battManIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager network interface hardware revision.
This value is set at the factory."
::= { battManIdent 2 }
battManIdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager network interface firmware revision.
This value is set at the factory and can change with firmware update."
::= { battManIdent 3 }
battManIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date the battery manager was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { battManIdent 4 }
battManIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager model number character string.
This value is set at the factory."
::= { battManIdent 5 }
battManIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager serial number character string.
This value is set at the factory."
::= { battManIdent 6 }
-- the battManCalib group
-- system calibration
battManOhmicValueCorrectionFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The system ohmic value correction factor in percent."
::= { battManSystemCalib 1 }
-- unit calibration
battManUnitCalibTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManUnitCalibTable."
::= { battManUnitCalib 1 }
battManUnitCalibTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManUnitCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting calibration information from each unit in the system."
::= { battManUnitCalib 2 }
battManUnitCalibEntry OBJECT-TYPE
SYNTAX BattManUnitCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { battManUnitCalibIndex }
::= { battManUnitCalibTable 1 }
BattManUnitCalibEntry ::=
SEQUENCE {
battManUnitCalibIndex INTEGER,
battManUnitSerialNumber DisplayString,
battManBatteryVoltageZeroCalib INTEGER,
battManBatteryVoltageSpanCalib INTEGER
}
battManUnitCalibIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of unit calibration entries in the table."
::= { battManUnitCalibEntry 1 }
battManUnitSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the unit."
::= { battManUnitCalibEntry 2 }
battManBatteryVoltageZeroCalib OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit battery voltage zero calibration in millivolts."
::= { battManUnitCalibEntry 3 }
battManBatteryVoltageSpanCalib OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit battery voltage span calibration in hundredths of percent."
::= { battManUnitCalibEntry 4 }
-- string calibration table
battManStringCalibTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManStringCalibTable."
::= { battManStringCalib 1 }
battManStringCalibTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManStringCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting calibration information from each string in the system."
::= { battManStringCalib 2 }
battManStringCalibEntry OBJECT-TYPE
SYNTAX BattManStringCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManStringCalibIndex }
::= { battManStringCalibTable 1 }
BattManStringCalibEntry ::=
SEQUENCE {
battManStringCalibIndex INTEGER,
battManDCCurrentZeroCalib INTEGER,
battManACCurrentZeroCalib INTEGER,
battManProbeRange INTEGER
}
battManStringCalibIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of string calibration entries in the table."
::= { battManStringCalibEntry 1 }
battManDCCurrentZeroCalib OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The string DC current zero calibration in tenths of amps."
::= { battManStringCalibEntry 2 }
battManACCurrentZeroCalib OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The string AC current zero calibration in tenths of amps."
::= { battManStringCalibEntry 3 }
battManProbeRange OBJECT-TYPE
SYNTAX INTEGER {
amps1000 (1),
amps500 (2),
amps100 (3),
amps200 (4),
amps2000 (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The string probe range in amps."
::= { battManStringCalibEntry 4 }
--string 1 battery calibration table
battManString1BatteryCalibTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString1BatteryCalibTable."
::= { battManBatteryCalib 1 }
battManString1BatteryCalibTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString1BatteryCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting calibration information from each battery in String 1."
::= { battManBatteryCalib 2 }
battManString1BatteryCalibEntry OBJECT-TYPE
SYNTAX BattManString1BatteryCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString1BatteryCalibIndex }
::= { battManString1BatteryCalibTable 1 }
BattManString1BatteryCalibEntry ::=
SEQUENCE {
battManString1BatteryCalibIndex INTEGER,
battManString1BatteryInterTierOhmicValue INTEGER
}
battManString1BatteryCalibIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of battery calibration entries in the table."
::= { battManString1BatteryCalibEntry 1 }
battManString1BatteryInterTierOhmicValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The battery inter-tier ohmic value in ohms. This corresponds to the ohmic
value for the positive terminal of the battery."
::= { battManString1BatteryCalibEntry 2 }
--string 2 battery calibration table
battManString2BatteryCalibTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString2BatteryCalibTable."
::= { battManBatteryCalib 3 }
battManString2BatteryCalibTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString2BatteryCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting calibration information from each battery in String 2."
::= { battManBatteryCalib 4 }
battManString2BatteryCalibEntry OBJECT-TYPE
SYNTAX BattManString2BatteryCalibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString2BatteryCalibIndex }
::= { battManString2BatteryCalibTable 1 }
BattManString2BatteryCalibEntry ::=
SEQUENCE {
battManString2BatteryCalibIndex INTEGER,
battManString2BatteryInterTierOhmicValue INTEGER
}
battManString2BatteryCalibIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of battery calibration entries in the table."
::= { battManString2BatteryCalibEntry 1 }
battManString2BatteryInterTierOhmicValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The battery inter-tier ohmic value in ohms."
::= { battManString2BatteryCalibEntry 2 }
-- the battManConfig group
battManConfigApplication OBJECT-TYPE
SYNTAX INTEGER {
silcon (1),
other (2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This OID has been deprecated."
::= { battManConfig 1 }
battManConfigBatteryChemistry OBJECT-TYPE
SYNTAX INTEGER {
leadAcid (1),
nickel-Cadmium (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The battery chemistry of the monitored batteries:
LeadAcid(1) Lead Acid or
Nickel-Cadmium(2) Nickel-Cadmium."
::= { battManConfig 2 }
battManConfigBatteryAHCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amp hour capacity of the monitored batteries 5-4000 AH."
::= { battManConfig 3 }
battManConfigNumberofStrings OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of strings in the battery manager system."
::= { battManConfig 4 }
battManConfigBatteriesperString OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of batteries per string."
::= { battManConfig 5 }
battManConfigCellsperBattery OBJECT-TYPE
SYNTAX INTEGER {
oneCell (1),
twoCells (2),
fourCells (4),
sixCells (6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cells per battery (1, 2, 4 or 6 for lead-acid, 1 or 2 for NiCd."
::= { battManConfig 6 }
battManConfigMinCellVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum battery cell voltage alarm limit in millivolts DC."
::= { battManConfig 7 }
battManConfigMaxCellVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum battery cell voltage alarm limit in millivolts DC."
::= { battManConfig 8 }
battManConfigMaxPilotTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum pilot battery temperature alarm limit in tenths of degrees Fahrenheit."
::= { battManConfig 9 }
battManConfigMaxPilotTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum pilot battery temperature alarm limit in tenths of degrees Celsius."
::= { battManConfig 10 }
battManConfigMaxAmbientTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum ambient temperature alarm limit in tenths of degrees Fahrenheit."
::= { battManConfig 11 }
battManConfigMaxAmbientTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum ambient temperature alarm limit in tenths of degrees Celsius."
::= { battManConfig 12 }
battManConfigMinAmbientTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Minimum Ambient Temperature alarm limit in tenths of degrees Fahrenheit."
::= { battManConfig 13 }
battManConfigMinAmbientTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Minimum Ambient Temperature alarm limit in tenths of degrees Celsius."
::= { battManConfig 14 }
battManConfigMaxRippleCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum ripple current alarm limit for the monitored battery
strings in percent of AH capacity."
::= { battManConfig 15 }
battManConfigMaxCurrentAcceptanceDeviation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum current acceptance deviation alarm limit in percent."
::= { battManConfig 16 }
battManConfigMonitorWireLength OBJECT-TYPE
SYNTAX INTEGER {
fiftyFeetOrLess (1),
moreThanFiftyFeet (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The monitor wire length:
fiftyFeetOrLess (1) indicates that the wire length is less than or equal to 50 feet.
moreThanFiftyFeet (2) indicates that the wire length is greater than 50 feet."
::= { battManConfig 17 }
battManConfigDischargeVoltageAlarmLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The discharge voltage alarm level in percent."
::= { battManConfig 18 }
battManConfigAutoAnnunciatorReset OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The annunciator output signal reset method:
disabled(1) means the annunciator signal output will be reset when the reset button is pressed.
enabled(2) means the annunciator will stop signaling when all alarm conditions clear."
::= { battManConfig 19 }
battManConfigSuspendCellVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is used along with the number of cells per battery
and the number of batteries per string to determine if
a battery string has violated the low voltage limit. If
so, the Battery Management System will enter suspend mode.
Measured in millivolts DC"
::= { battManConfig 20 }
battManConfigOhmicTestWaitTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time in seconds after a discharge event before
data will be collected for the ohmic value calculation."
::= { battManConfig 21 }
battManConfigNumberOfBoosts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of consecutive times the Battery Management
System applies a charge to each battery during a boost
cycle. Batteries with a Rated Battery AH Capacity
less than or equal to 120 AH will always have a value
of one for Number of Boosts."
::= { battManConfig 22 }
-- the battManAlarm group
battManAlarmManagementController OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Management Controller Alarm is :
normal(1) no alarm conditions identified
alarm(2) an alarm condition exists."
::= { battManAlarm 1 }
battManAlarmBatteries OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Batteries Alarm is :
normal(1) no alarm conditions identified
alarm(2) an alarm condition exists."
::= { battManAlarm 2 }
battManAlarmCharger OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Charger Alarm is :
normal(1) no alarm conditions identified
alarm(2) an alarm condition exists."
::= { battManAlarm 3 }
battManAlarmEnvironment OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Environment Alarm is :
normal(1) no alarm conditions identified
alarm(2) an alarm condition exists."
::= { battManAlarm 4 }
-- the battManSystemStatus group
-- These are system wide parameters
battManSystemAmbientTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system ambient temperature in tenths of degrees Celsius."
::= { battManSystemStatus 1 }
battManSystemAmbientTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system ambient temperature in tenths of degrees Fahrenheit."
::= { battManSystemStatus 2 }
battManSystemPilotTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system pilot temperature in tenths of degrees Celsius."
::= { battManSystemStatus 3 }
battManSystemPilotTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system pilot temperature in tenths of degrees Fahrenheit."
::= { battManSystemStatus 4 }
battManSystemAmbientHighTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system has a high temperature alarm."
::= { battManSystemStatus 5 }
battManSystemAmbientLowTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system has a low temperature alarm."
::= { battManSystemStatus 6 }
battManSystemPilotBatteryHighTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system has a pilot battery high temperature alarm."
::= { battManSystemStatus 7 }
battManSystemPilotProbeDisconnected OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system pilot probe is disconnected."
::= { battManSystemStatus 8 }
battManSystemAmbientProbeDisconnected OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system ambient probe is disconnected."
::= { battManSystemStatus 9 }
battManSystemConfigurationInvalid OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system is not configured correctly."
::= { battManSystemStatus 10 }
battManSystemSuspendVoltage OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the system has suspended voltage scans."
::= { battManSystemStatus 11 }
-- This is a table of input contact parameters
battManInputContactTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManInputContactTable."
::= { battManInputContactStatus 1 }
battManInputContactTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManInputContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each contact
in the system. "
::= { battManInputContactStatus 2 }
battManInputContactEntry OBJECT-TYPE
SYNTAX BattManInputContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The contact to get data from."
INDEX { battManInputContactIndex }
::= { battManInputContactTable 1 }
BattManInputContactEntry ::=
SEQUENCE {
battManInputContactIndex INTEGER,
battManInputContactName DisplayString,
battManInputContactAlarmState INTEGER,
battManInputContactState INTEGER,
battManInputContactNormalState INTEGER,
battManInputContactAlarmDelay INTEGER
}
battManInputContactIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of contact entries in the table."
::= { battManInputContactEntry 1 }
battManInputContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the input contact."
::= { battManInputContactEntry 2 }
battManInputContactAlarmState OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the alarm condition is active for this contact."
::= { battManInputContactEntry 3 }
battManInputContactState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to open(1), the input contact is in the open state.
When set to closed(2), the input contact is in the closed state."
::= { battManInputContactEntry 4 }
battManInputContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to open(1), the input contact is normally open.
When set to closed(2), the input contact is normally closed."
::= { battManInputContactEntry 5 }
battManInputContactAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The input contact alarm delay time in seconds."
::= { battManInputContactEntry 6 }
-- This is a table of battery string parameters
battManStringTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManStringTable."
::= { battManStringStatus 1 }
battManStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each string
in the system. "
::= { battManStringStatus 2 }
battManStringEntry OBJECT-TYPE
SYNTAX BattManStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManStringIndex }
::= { battManStringTable 1 }
BattManStringEntry ::=
SEQUENCE {
battManStringIndex INTEGER,
battManStringCurrent INTEGER,
battManStringRippleCurrent INTEGER,
battManStringChargerHighVoltageAlarm INTEGER,
battManStringChargerLowVoltageAlarm INTEGER,
battManStringCurrentProbeDisconnected INTEGER,
battManStringOnBattery INTEGER,
battManStringHighRippleCurrent INTEGER,
battManStringVoltage INTEGER,
battManStringDischargeLess5Seconds INTEGER,
battManStringDischarge5to10Seconds INTEGER,
battManStringDischarge10to60Seconds INTEGER,
battManStringDischargeMore60Seconds INTEGER
}
battManStringIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of string entries in the table."
::= { battManStringEntry 1 }
battManStringCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The string current in tenths of amps."
::= { battManStringEntry 2 }
battManStringRippleCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The string ripple current in tenths of amps."
::= { battManStringEntry 3 }
battManStringChargerHighVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the string charger has a high voltage alarm."
::= { battManStringEntry 4 }
battManStringChargerLowVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the string charger has a low voltage alarm."
::= { battManStringEntry 5 }
battManStringCurrentProbeDisconnected OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the string charger probe is disconnected."
::= { battManStringEntry 6 }
battManStringOnBattery OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the string is in the on-battery state."
::= { battManStringEntry 7 }
battManStringHighRippleCurrent OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that the string has a high ripple current."
::= { battManStringEntry 8 }
battManStringVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of the voltages for all of the batteries on a
string in millivolts DC."
::= { battManStringEntry 9 }
battManStringDischargeLess5Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of recorded discharges lasting less than
5 seconds."
::= { battManStringEntry 10 }
battManStringDischarge5to10Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of recorded discharges lasting between 5
and 10 seconds."
::= { battManStringEntry 11 }
battManStringDischarge10to60Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of recorded discharges lasting between 10
and 60 seconds."
::= { battManStringEntry 12 }
battManStringDischargeMore60Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of recorded discharges lasting more than
60 seconds (1 minute)."
::= { battManStringEntry 13 }
-- the battManString1BatteryStatus group
battManString1BatteryTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString1BatteryTable."
::= { battManBatteryStatus 1 }
battManString1BatteryTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString1BatteryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each string
in the system. "
::= { battManBatteryStatus 2 }
battManString1BatteryEntry OBJECT-TYPE
SYNTAX BattManString1BatteryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString1BatteryIndex }
::= { battManString1BatteryTable 1 }
BattManString1BatteryEntry ::=
SEQUENCE {
battManString1BatteryIndex INTEGER,
battManString1BatteryVoltage INTEGER,
battManString1BatteryLowestVoltage INTEGER,
battManString1BatteryCellShorted INTEGER,
battManString1BatteryOpenFuseOrConnection INTEGER,
battManString1BatteryLowCapacity INTEGER,
battManString1BatteryHighOhmicValue INTEGER,
battManString1BatteryThermalRunaway INTEGER,
battManString1BatteryDryout INTEGER,
battManString1BatteryUserHighVoltageAlarm INTEGER,
battManString1BatteryUserLowVoltageAlarm INTEGER,
battManString1BatteryChemHighVoltageAlarm INTEGER,
battManString1BatteryChemLowVoltageAlarm INTEGER,
battManString1BatteryOpenCell INTEGER
}
battManString1BatteryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of string entries in the table."
::= { battManString1BatteryEntry 1 }
battManString1BatteryVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery voltage in millivolts DC."
::= { battManString1BatteryEntry 2 }
battManString1BatteryLowestVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lowest battery discharge voltage during the last power event in millivolts DC."
::= { battManString1BatteryEntry 3 }
battManString1BatteryCellShorted OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that a battery cell is shorted."
::= { battManString1BatteryEntry 4 }
battManString1BatteryOpenFuseOrConnection OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that a fuse or connection is open."
::= { battManString1BatteryEntry 5 }
battManString1BatteryLowCapacity OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has low capacity."
::= { battManString1BatteryEntry 6 }
battManString1BatteryHighOhmicValue OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has a high ohmic value."
::= { battManString1BatteryEntry 7 }
battManString1BatteryThermalRunaway OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has a thermal runaway condition."
::= { battManString1BatteryEntry 8 }
battManString1BatteryDryout OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has a dryout condition."
::= { battManString1BatteryEntry 9 }
battManString1BatteryUserHighVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the user level high voltage limit."
::= { battManString1BatteryEntry 10 }
battManString1BatteryUserLowVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the user level low voltage limit."
::= { battManString1BatteryEntry 11 }
battManString1BatteryChemHighVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the chemistry level high voltage limit."
::= { battManString1BatteryEntry 12 }
battManString1BatteryChemLowVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the chemistry level low voltage limit."
::= { battManString1BatteryEntry 13 }
battManString1BatteryOpenCell OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates the battery has an open
cell or an inter-connection is abnormal."
::= { battManString1BatteryEntry 14 }
-- the battManString2BatteryStatus group
battManString2BatteryTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString2BatteryTable."
::= { battManBatteryStatus 3 }
battManString2BatteryTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString2BatteryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each string
in the system. "
::= { battManBatteryStatus 4 }
battManString2BatteryEntry OBJECT-TYPE
SYNTAX BattManString2BatteryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString2BatteryIndex }
::= { battManString2BatteryTable 1 }
BattManString2BatteryEntry ::=
SEQUENCE {
battManString2BatteryIndex INTEGER,
battManString2BatteryVoltage INTEGER,
battManString2BatteryLowestVoltage INTEGER,
battManString2BatteryCellShorted INTEGER,
battManString2BatteryOpenFuseOrConnection INTEGER,
battManString2BatteryLowCapacity INTEGER,
battManString2BatteryHighOhmicValue INTEGER,
battManString2BatteryThermalRunaway INTEGER,
battManString2BatteryDryout INTEGER,
battManString2BatteryUserHighVoltageAlarm INTEGER,
battManString2BatteryUserLowVoltageAlarm INTEGER,
battManString2BatteryChemHighVoltageAlarm INTEGER,
battManString2BatteryChemLowVoltageAlarm INTEGER,
battManString2BatteryOpenCell INTEGER
}
battManString2BatteryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of string entries in the table."
::= { battManString2BatteryEntry 1 }
battManString2BatteryVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery voltage in millivolts DC."
::= { battManString2BatteryEntry 2 }
battManString2BatteryLowestVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lowest battery discharge voltage during the last power event in millivolts DC."
::= { battManString2BatteryEntry 3 }
battManString2BatteryCellShorted OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that a battery cell is shorted."
::= { battManString2BatteryEntry 4 }
battManString2BatteryOpenFuseOrConnection OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates that a fuse or connection is open."
::= { battManString2BatteryEntry 5 }
battManString2BatteryLowCapacity OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has low capacity."
::= { battManString2BatteryEntry 6 }
battManString2BatteryHighOhmicValue OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has a high ohmic value."
::= { battManString2BatteryEntry 7 }
battManString2BatteryThermalRunaway OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has a thermal runaway condition."
::= { battManString2BatteryEntry 8 }
battManString2BatteryDryout OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has a dryout condition."
::= { battManString2BatteryEntry 9 }
battManString2BatteryUserHighVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the user level high voltage limit."
::= { battManString2BatteryEntry 10 }
battManString2BatteryUserLowVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the user level low voltage limit."
::= { battManString2BatteryEntry 11 }
battManString2BatteryChemHighVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the chemistry level high voltage limit."
::= { battManString2BatteryEntry 12 }
battManString2BatteryChemLowVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates a battery has violated
the chemistry level low voltage limit."
::= { battManString2BatteryEntry 13 }
battManString2BatteryOpenCell OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates the battery has an open
cell or an inter-connection is abnormal."
::= { battManString2BatteryEntry 14 }
-- battery manager control group
battManRemoteAnnunciatorReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset the user interface annunciator.
Getting this OID will do nothing and return the noOperation(1) value."
::= { battManControl 1 }
battManResetChargeCurrentDeviationBenchmark OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset the charge current deviation benchmark.
Getting this OID will do nothing and return the noOperation(1) value."
::= { battManControl 2 }
battManResetLowestDischargeVoltages OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset the lowest discharge voltages.
Getting this OID will do nothing and return the noOperation(1) value."
::= { battManControl 3 }
battManResetDischargeCounters OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset all discharge event counters.
Getting this OID will do nothing and return the noOperation(1) value."
::= { battManControl 4 }
-- the battManTestResults group
--string 1 test results table
battManString1OhmicValueLastDischargeInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Informational text showing the date/time, load, and pilot temperature for the string
during the last discharge when ohmic values were recorded."
::= { battManTestResults 1 }
battManString1OhmicValueTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString1OhmicValueTable."
::= { battManTestResults 2 }
battManString1OhmicValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString1OhmicValueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting ohmic value information from each battery in String 1."
::= { battManTestResults 3 }
battManString1OhmicValueEntry OBJECT-TYPE
SYNTAX BattManString1OhmicValueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString1OhmicValueIndex }
::= { battManString1OhmicValueTable 1 }
BattManString1OhmicValueEntry ::=
SEQUENCE {
battManString1OhmicValueIndex INTEGER,
battManString1OhmicValueData INTEGER
}
battManString1OhmicValueIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery number."
::= { battManString1OhmicValueEntry 1 }
battManString1OhmicValueData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery inter-tier ohmic value in tenths of milli-Ohms.
Note: Zero or negative values are invalid and may indicate
faulty calibration of ohmic value correction factors."
::= { battManString1OhmicValueEntry 2 }
battManString1ResponseTestChangeTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString1ResponseTestChangeTable."
::= { battManTestResults 4 }
battManString1ResponseTestChangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString1ResponseTestChangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting response test change information from each battery in String 1."
::= { battManTestResults 5 }
battManString1ResponseTestChangeEntry OBJECT-TYPE
SYNTAX BattManString1ResponseTestChangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString1ResponseTestChangeIndex }
::= { battManString1ResponseTestChangeTable 1 }
BattManString1ResponseTestChangeEntry ::=
SEQUENCE {
battManString1ResponseTestChangeIndex INTEGER,
battManString1ResponseTestChangeData INTEGER
}
battManString1ResponseTestChangeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the entries in the table."
::= { battManString1ResponseTestChangeEntry 1 }
battManString1ResponseTestChangeData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery response test change in percent."
::= { battManString1ResponseTestChangeEntry 2 }
battManString2OhmicValueLastDischargeInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Informational text showing the date/time, load, and pilot temperature for the string
during the last discharge when ohmic values were recorded."
::= { battManTestResults 6 }
battManString2OhmicValueTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString2OhmicValueTable."
::= { battManTestResults 7 }
battManString2OhmicValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString2OhmicValueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting ohmic value information from each battery in String 2."
::= { battManTestResults 8 }
battManString2OhmicValueEntry OBJECT-TYPE
SYNTAX BattManString2OhmicValueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString2OhmicValueIndex }
::= { battManString2OhmicValueTable 1 }
BattManString2OhmicValueEntry ::=
SEQUENCE {
battManString2OhmicValueIndex INTEGER,
battManString2OhmicValueData INTEGER
}
battManString2OhmicValueIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of battery calibration entries in the table."
::= { battManString2OhmicValueEntry 1 }
battManString2OhmicValueData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery inter-tier ohmic value in ohms.
Note: Zero or negative values are invalid and may indicate
faulty calibration of ohmic value correction factors."
::= { battManString2OhmicValueEntry 2 }
battManString2ResponseTestChangeTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString2ResponseTestChangeTable."
::= { battManTestResults 9 }
battManString2ResponseTestChangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString2ResponseTestChangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting response test change information from each battery in String 2."
::= { battManTestResults 10 }
battManString2ResponseTestChangeEntry OBJECT-TYPE
SYNTAX BattManString2ResponseTestChangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString2ResponseTestChangeIndex }
::= { battManString2ResponseTestChangeTable 1 }
BattManString2ResponseTestChangeEntry ::=
SEQUENCE {
battManString2ResponseTestChangeIndex INTEGER,
battManString2ResponseTestChangeData INTEGER
}
battManString2ResponseTestChangeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the entries in the table."
::= { battManString2ResponseTestChangeEntry 1 }
battManString2ResponseTestChangeData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery response test change in percent."
::= { battManString2ResponseTestChangeEntry 2 }
battManString1ResponseTestCurrentTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString1ResponseTestCurrentTable."
::= { battManTestResults 11 }
battManString1ResponseTestCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString1ResponseTestCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting response test current information from each battery
in String 1."
::= { battManTestResults 12 }
battManString1ResponseTestCurrentEntry OBJECT-TYPE
SYNTAX BattManString1ResponseTestCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString1ResponseTestCurrentIndex }
::= { battManString1ResponseTestCurrentTable 1 }
BattManString1ResponseTestCurrentEntry ::=
SEQUENCE {
battManString1ResponseTestCurrentIndex INTEGER,
battManString1ResponseTestCurrentData INTEGER
}
battManString1ResponseTestCurrentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the entries in the table."
::= { battManString1ResponseTestCurrentEntry 1 }
battManString1ResponseTestCurrentData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery response test current in milliamps."
::= { battManString1ResponseTestCurrentEntry 2 }
battManString2ResponseTestCurrentTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString2ResponseTestCurrentTable."
::= { battManTestResults 13 }
battManString2ResponseTestCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString2ResponseTestCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting response test current information from each battery
in String 2."
::= { battManTestResults 14 }
battManString2ResponseTestCurrentEntry OBJECT-TYPE
SYNTAX BattManString2ResponseTestCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString2ResponseTestCurrentIndex }
::= { battManString2ResponseTestCurrentTable 1 }
BattManString2ResponseTestCurrentEntry ::=
SEQUENCE {
battManString2ResponseTestCurrentIndex INTEGER,
battManString2ResponseTestCurrentData INTEGER
}
battManString2ResponseTestCurrentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the entries in the table."
::= { battManString2ResponseTestCurrentEntry 1 }
battManString2ResponseTestCurrentData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery response test current in milliamps."
::= { battManString2ResponseTestCurrentEntry 2 }
battManString1ResponseTestCurrentBenchmarkTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString1ResponseTestCurrentBenchmarkTable."
::= { battManTestResults 15 }
battManString1ResponseTestCurrentBenchmarkTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString1ResponseTestCurrentBenchmarkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting response test current benchmark information from
each battery in String 1."
::= { battManTestResults 16 }
battManString1ResponseTestCurrentBenchmarkEntry OBJECT-TYPE
SYNTAX BattManString1ResponseTestCurrentBenchmarkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString1ResponseTestCurrentBenchmarkIndex }
::= { battManString1ResponseTestCurrentBenchmarkTable 1 }
BattManString1ResponseTestCurrentBenchmarkEntry ::=
SEQUENCE {
battManString1ResponseTestCurrentBenchmarkIndex INTEGER,
battManString1ResponseTestCurrentBenchmarkData INTEGER
}
battManString1ResponseTestCurrentBenchmarkIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the entries in the table."
::= { battManString1ResponseTestCurrentBenchmarkEntry 1 }
battManString1ResponseTestCurrentBenchmarkData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery response test current benchmark in milliamps."
::= { battManString1ResponseTestCurrentBenchmarkEntry 2 }
battManString2ResponseTestCurrentBenchmarkTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManString2ResponseTestCurrentBenchmarkTable."
::= { battManTestResults 17 }
battManString2ResponseTestCurrentBenchmarkTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManString2ResponseTestCurrentBenchmarkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting response test current benchmark information from
each battery in String 2."
::= { battManTestResults 18 }
battManString2ResponseTestCurrentBenchmarkEntry OBJECT-TYPE
SYNTAX BattManString2ResponseTestCurrentBenchmarkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The string to get data from."
INDEX { battManString2ResponseTestCurrentBenchmarkIndex }
::= { battManString2ResponseTestCurrentBenchmarkTable 1 }
BattManString2ResponseTestCurrentBenchmarkEntry ::=
SEQUENCE {
battManString2ResponseTestCurrentBenchmarkIndex INTEGER,
battManString2ResponseTestCurrentBenchmarkData INTEGER
}
battManString2ResponseTestCurrentBenchmarkIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the entries in the table."
::= { battManString2ResponseTestCurrentBenchmarkEntry 1 }
battManString2ResponseTestCurrentBenchmarkData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery response test current benchmark in milliamps."
::= { battManString2ResponseTestCurrentBenchmarkEntry 2 }
-- battManUnitStatus
battManUnitStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the battManUnitStatusTable."
::= { battManUnitStatus 1 }
battManUnitStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF BattManUnitStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting status information from each unit in the system."
::= { battManUnitStatus 2 }
battManUnitStatusEntry OBJECT-TYPE
SYNTAX BattManUnitStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { battManUnitStatusIndex }
::= { battManUnitStatusTable 1 }
BattManUnitStatusEntry ::=
SEQUENCE {
battManUnitStatusIndex INTEGER,
battManUnitStatusSerialNumber DisplayString,
battManUnitHardwareRev INTEGER,
battManUnitFirmwareRev INTEGER,
battManUnitCommLoss INTEGER,
battManUnitRelayStuck INTEGER
}
battManUnitStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of unit status entries in the table."
::= { battManUnitStatusEntry 1 }
battManUnitStatusSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager unit serial number character string.
This value is set at the factory."
::= { battManUnitStatusEntry 2 }
battManUnitHardwareRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager unit hardware revision.
This value is set at the factory."
::= { battManUnitStatusEntry 3 }
battManUnitFirmwareRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery manager unit firmware revision.
This value is set at the factory and can change with firmware update."
::= { battManUnitStatusEntry 4 }
battManUnitCommLoss OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates the system has lost
communication with the unit."
::= { battManUnitStatusEntry 5 }
battManUnitRelayStuck OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set to alarm(2), indicates the unit monitor relay
is stuck."
::= { battManUnitStatusEntry 6 }
-- the xPDUIdent group
xPDUIdentProductName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the PDU."
::= { xPDUIdent 1 }
xPDUIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the PDU.
This value is set at the factory."
::= { xPDUIdent 2 }
xPDUIdentFirmwareAppRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application firmware revision of the PDU."
::= { xPDUIdent 3 }
xPDUIdentFirmwareAppOSRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application operating system firmware revision of the PDU."
::= { xPDUIdent 4 }
xPDUIdentFirmwareControllerRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the PDU controller firmware revision."
::= { xPDUIdent 5 }
xPDUIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the PDU was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { xPDUIdent 6 }
xPDUIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of
the PDU. This value is set at the factory."
::= { xPDUIdent 7 }
xPDUIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of
the PDU. This value is set at the factory."
::= { xPDUIdent 8 }
-- the xPDUDevice group
xPDUDeviceNominalMainInputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal main input voltage to the PDU. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a
4-wire (wye) service."
::= { xPDUDevice 1 }
xPDUDeviceServiceType OBJECT-TYPE
SYNTAX INTEGER {
threeWire (1),
fourWire (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of utility input to the PDU. Either 3 wires (delta), or 4 wires (wye)."
::= { xPDUDevice 2 }
xPDUDeviceNominalOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal line-to-neutral output voltage to the load measured in Volts."
::= { xPDUDevice 3 }
xPDUDeviceMainInputBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rating of the main input breaker measured in Amps."
::= { xPDUDevice 4 }
xPDUDevicePanelBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rating of the panel breaker measured in Amps."
::= { xPDUDevice 5 }
xPDUDeviceTransformerPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not a transformer is installed in the PDU."
::= { xPDUDevice 6 }
xPDUDeviceLoadTieBreakerPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not a load tie breaker is installed in the PDU."
::= { xPDUDevice 7 }
xPDUDeviceLoadTestPortPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not a load test port is installed in the PDU."
::= { xPDUDevice 8 }
xPDUDeviceFusesPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not the UPS feed from the PDU includes fuses."
::= { xPDUDevice 9 }
xPDUDeviceFansPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not cooling fans are installed in the PDU."
::= { xPDUDevice 10 }
xPDUDeviceBypassInputPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not the PDU is equipped with a second feed for
the UPS's bypass input."
::= { xPDUDevice 11 }
xPDUDeviceCrossTieOutputPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not the PDU is equipped with a cross-tie output."
::= { xPDUDevice 12 }
xPDUDeviceEarthGroundMonitorPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not the PDU can provide ground current measurements."
::= { xPDUDevice 13 }
xPDUDeviceInfraStruXureType OBJECT-TYPE
SYNTAX INTEGER {
typeB (1),
typeC (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the configuration of this PDU system.
Type-B PDU is in a distributed UPS system and has bypass capabilities.
Type-C PDU receives power from a larger central UPS."
::= { xPDUDevice 14 }
-- Main Input
xPDUMainInputOverVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input over voltage condition will be generated.
Specified as percent deviation from nominal."
::= { xPDUMainInput 1 }
xPDUMainInputUnderVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an input under voltage condition will be generated.
Specified as percent deviation from nominal.
A value of zero indicates that the threshold is disabled."
::= { xPDUMainInput 2 }
-- Main Input Voltage Table
xPDUMainInputVoltageTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Main input voltage entries."
::= { xPDUMainInput 3 }
xPDUMainInputVoltagePhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUMainInputVoltagePhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input voltage table entries. The number of
entries are the phase entries.
The number of entries is contained in the
xPDUMainInputVoltageTableSize OID."
::= { xPDUMainInput 4 }
xPDUMainInputVoltagePhaseEntry OBJECT-TYPE
SYNTAX XPDUMainInputVoltagePhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular main input voltage phase."
INDEX { xPDUMainInputVoltagePhaseIndex }
::= { xPDUMainInputVoltagePhaseTable 1 }
XPDUMainInputVoltagePhaseEntry ::= SEQUENCE {
xPDUMainInputVoltagePhaseIndex INTEGER,
xPDUMainInputVoltageLtoL INTEGER,
xPDUMainInputVoltageLtoN INTEGER
}
xPDUMainInputVoltagePhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each input phase entry in the table."
::= { xPDUMainInputVoltagePhaseEntry 1 }
xPDUMainInputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line PDU input voltage when an isolation transformer is present,
or -1 if no transformer present in this PDU. Measured in tenths of Volts."
::= { xPDUMainInputVoltagePhaseEntry 2 }
xPDUMainInputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral PDU input voltage when an isolation transformer is not present,
or -1 if a transformer is present in this PDU. Measured in tenths of Volts."
::= { xPDUMainInputVoltagePhaseEntry 3 }
xPDUBypassInputOverVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a bypass input over voltage condition will be generated.
Specified as percent deviation from nominal."
::= { xPDUBypassInput 1 }
xPDUBypassInputUnderVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an bypass input under voltage condition will be generated.
Specified as percent deviation from nominal.
A value of zero indicates that the threshold is disabled."
::= { xPDUBypassInput 2 }
-- Bypass Input Voltage Table
xPDUBypassInputVoltagePhaseTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bypass input voltage entries."
::= { xPDUBypassInput 3 }
xPDUBypassInputVoltagePhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUBypassInputVoltagePhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of
entries are the phase entries.
The number of entries is contained in the
xPDUBypassInputVoltagePhaseTableSize OID."
::= { xPDUBypassInput 4 }
xPDUBypassInputVoltagePhaseEntry OBJECT-TYPE
SYNTAX XPDUBypassInputVoltagePhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular bypass input voltage phase."
INDEX { xPDUBypassInputVoltagePhaseIndex }
::= { xPDUBypassInputVoltagePhaseTable 1 }
XPDUBypassInputVoltagePhaseEntry ::= SEQUENCE {
xPDUBypassInputVoltagePhaseIndex INTEGER,
xPDUBypassInputVoltageLtoL INTEGER,
xPDUBypassInputVoltageLtoN INTEGER
}
xPDUBypassInputVoltagePhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of each bypass input phase entry in the table."
::= { xPDUBypassInputVoltagePhaseEntry 1 }
xPDUBypassInputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line bypass input voltage, or -1 if no bypass
feed is present in this PDU. Measured in tenths of Volts."
::= { xPDUBypassInputVoltagePhaseEntry 2 }
xPDUBypassInputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral bypass input voltage, or -1 if no bypass
feed is present in this PDU. Measured in tenths of Volts."
::= { xPDUBypassInputVoltagePhaseEntry 3 }
-- UPS Input Table
xPDUUPSInputVoltagePhaseTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of UPS input voltage entries."
::= { xPDUUPSInput 1 }
xPDUUPSInputVoltagePhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUUPSInputVoltagePhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of UPS input table entries. The number of
entries are the phase entries.
The number of entries is contained in the
xPDUUPSInputVoltagePhaseTableSize OID."
::= { xPDUUPSInput 2 }
xPDUUPSInputVoltagePhaseEntry OBJECT-TYPE
SYNTAX XPDUUPSInputVoltagePhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular UPS input voltage phase."
INDEX { xPDUUPSInputVoltagePhaseIndex }
::= { xPDUUPSInputVoltagePhaseTable 1 }
XPDUUPSInputVoltagePhaseEntry ::= SEQUENCE {
xPDUUPSInputVoltagePhaseIndex INTEGER,
xPDUUPSInputVoltageLtoNPresent INTEGER
}
xPDUUPSInputVoltagePhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each UPS input phase entry in the table."
::= { xPDUUPSInputVoltagePhaseEntry 1 }
xPDUUPSInputVoltageLtoNPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not voltage is present at the UPS feed."
::= { xPDUUPSInputVoltagePhaseEntry 2 }
-- System Output
xPDUSystemOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system output frequency in tenths of Hertz."
::= { xPDUSystemOutput 1 }
xPDUSystemOutputNeutralCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the neutral current measured at the system output in tenths of Amps."
::= { xPDUSystemOutput 2 }
xPDUSystemOutputTotalPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total system output power in tenths of kW."
::= { xPDUSystemOutput 3 }
xPDUSystemOutputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total system output power in tenths of kVA."
::= { xPDUSystemOutput 4 }
xPDUSystemOutputTotalPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total power factor of the system output.
A value of 100 representing a unity power factor (1.00).
Measured in hundredths."
::= { xPDUSystemOutput 5 }
xPDUSystemOutputFrequencyTolerance OBJECT-TYPE
SYNTAX INTEGER{
freqToleranceOff (1),
freqTolerancePointTwo (2),
freqTolerancePointFive (3),
freqToleranceOne (4),
freqToleranceOnePointFive (5),
freqToleranceTwo (6),
freqToleranceThree (7),
freqToleranceFour (8),
freqToleranceFive (9),
freqToleranceNine (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the circuit panel output frequency tolerance in Hertz."
::= { xPDUSystemOutput 6 }
xPDUSystemOutputMaxKWPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines 100% load in kW.
Purpose is to set to match UPS capabilities."
::= { xPDUSystemOutput 7 }
xPDUSystemOutputOverVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output over voltage condition will be generated.
Specified as percent deviation from nominal."
::= { xPDUSystemOutput 8 }
xPDUSystemOutputUnderVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output under voltage condition will be generated.
Specified as percent deviation from nominal.
A value of zero indicates that the threshold is disabled."
::= { xPDUSystemOutput 9 }
xPDUSystemOutputOverCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..110)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an over current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { xPDUSystemOutput 10 }
xPDUSystemOutputOverCurrentNeutralThreshold OBJECT-TYPE
SYNTAX INTEGER (0..110)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an Over current neutral condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { xPDUSystemOutput 11 }
xPDUSystemOutputUnderCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an under current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { xPDUSystemOutput 12 }
xPDUSystemOutputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of System Output phase entries."
::= { xPDUSystemOutput 13 }
xPDUSystemOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUSystemOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of system output table entries.
The number of entries is contained in the
xPDUSystemOutputTableSize OID."
::= { xPDUSystemOutput 14 }
xPDUSystemOutputPhaseEntry OBJECT-TYPE
SYNTAX XPDUSystemOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular system output phase."
INDEX { xPDUSystemOutputPhaseIndex }
::= { xPDUSystemOutputPhaseTable 1 }
XPDUSystemOutputPhaseEntry ::= SEQUENCE {
xPDUSystemOutputPhaseIndex INTEGER,
xPDUSystemOutputVoltageLtoL INTEGER,
xPDUSystemOutputVoltageLtoN INTEGER,
xPDUSystemOutputPhaseCurrent INTEGER,
xPDUSystemOutputPower INTEGER,
xPDUSystemOutputApparentPower INTEGER,
xPDUSystemOutputPowerFactor INTEGER
}
xPDUSystemOutputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each output phase entry in the table."
::= { xPDUSystemOutputPhaseEntry 1 }
xPDUSystemOutputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line system output voltage available at the circuit panel.
Measured in tenths of Volts."
::= { xPDUSystemOutputPhaseEntry 2 }
xPDUSystemOutputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral system output voltage available at the circuit panel.
Measured in tenths of Volts."
::= { xPDUSystemOutputPhaseEntry 3 }
xPDUSystemOutputPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System load current per phase. Measured in tenths of Amps."
::= { xPDUSystemOutputPhaseEntry 4 }
xPDUSystemOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System output power per phase. Measured in tenths of kW."
::= { xPDUSystemOutputPhaseEntry 5 }
xPDUSystemOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System output power per phase. Measured in tenths of kVA."
::= { xPDUSystemOutputPhaseEntry 6 }
xPDUSystemOutputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Power Factor of the system output per phase.
A value of 100 representing a unity Power Factor (1.00).
Measured in hundredths."
::= { xPDUSystemOutputPhaseEntry 7 }
xPDUGroundCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the current measured in the earth ground conductor.
Measured in tenths of Amps, or -1 if not available."
::= { xPDUGroundMonitorPoint 1 }
xPDUGroundCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..50)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a ground current over current
condition will be generated. Specified in tenths of Amps."
::= { xPDUGroundMonitorPoint 2 }
-- System Breakers
xPDUSystemBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of system breaker entries."
::= { xPDUSystemBreakers 1 }
xPDUSystemBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUSystemBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of system breaker entries.
The number of entries is contained in the
xPDUSystemBreakerTableSize OID."
::= { xPDUSystemBreakers 2 }
xPDUSystemBreakerEntry OBJECT-TYPE
SYNTAX XPDUSystemBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular system breaker."
INDEX { xPDUSystemBreakerTableIndex }
::= { xPDUSystemBreakerTable 1 }
XPDUSystemBreakerEntry ::= SEQUENCE {
xPDUSystemBreakerTableIndex INTEGER,
xPDUSystemBreakerDescription DisplayString,
xPDUSystemBreakerPosition INTEGER
}
xPDUSystemBreakerTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of system breaker entries in the table."
::= { xPDUSystemBreakerEntry 1 }
xPDUSystemBreakerDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..79))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A brief description of the system breakers."
::= { xPDUSystemBreakerEntry 2 }
xPDUSystemBreakerPosition OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this breaker is open(1) or closed(2)."
::= { xPDUSystemBreakerEntry 3 }
-- Branch Breakers (Breaker Panel)
xPDUNumOfBranchBreakers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of branch breakers (panel positions) in the Panel.
returns 42 for a 1-panel or 84 for a 2-panel system."
::= { xPDUBranchBreakers 1 }
-- Branch Breakers Table
xPDUBranchBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of branch breaker entries determined by the xPDUNumOfBranchBreakers OID."
::= { xPDUBranchBreakers 2 }
xPDUBranchBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUBranchBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of branch breaker table entries. The
number of entries is given by the value of xPDUBranchBreakerTableSize
The number of entries is contained in the xPDUBranchBreakerTableSize OID."
::= { xPDUBranchBreakers 3 }
xPDUBranchBreakerEntry OBJECT-TYPE
SYNTAX XPDUBranchBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular branch breaker (panel position)."
INDEX { xPDUBranchBreakerTableIndex }
::= { xPDUBranchBreakerTable 1 }
XPDUBranchBreakerEntry ::= SEQUENCE {
xPDUBranchBreakerTableIndex INTEGER,
xPDUBranchBreakerRating INTEGER,
xPDUBranchBreakerRDPFeed INTEGER,
xPDUBranchBreakerTieIndicator INTEGER,
xPDUBranchBreakerCurrent INTEGER,
xPDUBranchBreakerOverCurrentThreshold INTEGER,
xPDUBranchBreakerUnderCurrentThreshold INTEGER,
xPDUBranchBreakerMaxCurrentThreshold INTEGER,
xPDUBranchBreakerMinCurrentThreshold INTEGER,
xPDUBranchBreakerName DisplayString,
xPDUBranchBreakerLocation DisplayString
}
xPDUBranchBreakerTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of branch breaker entries in the table."
::= { xPDUBranchBreakerEntry 1 }
xPDUBranchBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates current rating of this breaker.
0=Breaker is not present.
1=Earth leakage connection.
2=Neutral connection.
A value greater than 2 indicates breaker current rating in Amps.
A value above 60 Amp will signify a remote feed.
The xPDUBranchBreakerRDPFeed OID will indicate which breakers are
configured as a remote drop.
Note: When setting branch circuit thresholds/ratings for an entry,
all positions tied (see the xPDUBranchBreakerTieIndicator OID)
to this entry will inherit the new threshold/rating."
::= { xPDUBranchBreakerEntry 2 }
xPDUBranchBreakerRDPFeed OBJECT-TYPE
SYNTAX INTEGER {
remoteDistribution (1),
noRemoteDistribution (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates that a breaker position is feeding a remote
distribution panel."
::= { xPDUBranchBreakerEntry 3 }
xPDUBranchBreakerTieIndicator OBJECT-TYPE
SYNTAX INTEGER {
breakerUnTied (1),
breakerTied (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether or not the breaker in this position
is logically associated with the breaker immediately below it.
This setting is used grouping the breakers feeding
a multi-pole branch circuit.
Note: When setting an entry's branch breaker tie indicator to breakerTied,
all the positions that are tied to this breaker will take on the rating
and thresholds for this entry of the table."
::= { xPDUBranchBreakerEntry 4 }
xPDUBranchBreakerCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the branch current in tenths of Amps or -1 when not available."
::= { xPDUBranchBreakerEntry 5 }
xPDUBranchBreakerOverCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a branch circuit high current
condition will be generated.
Specified as a percent of the branch breaker rating.
A value of zero indicates that the threshold is disabled.
Note: When setting branch circuit thresholds/ratings for an entry,
all positions tied (see the xPDUBranchBreakerTieIndicator OID)
to this entry will inherit the new threshold/rating."
::= { xPDUBranchBreakerEntry 6 }
xPDUBranchBreakerUnderCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a branch circuit low current
condition will be generated.
Specified as a percent of the branch breaker rating.
A value of zero indicates that the threshold is disabled.
Note: When setting branch circuit thresholds/ratings for an entry,
all positions tied (see the xPDUBranchBreakerTieIndicator OID)
to this entry will inherit the new threshold/rating."
::= { xPDUBranchBreakerEntry 7 }
xPDUBranchBreakerMaxCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a branch circuit maximum current
condition will be generated.
Specified as a percent of the branch breaker rating.
A value of zero indicates that the threshold is disabled.
Note: When setting branch circuit thresholds/ratings for an entry,
all positions tied (see the xPDUBranchBreakerTieIndicator OID)
to this entry will inherit the new threshold/rating."
::= { xPDUBranchBreakerEntry 8 }
xPDUBranchBreakerMinCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a branch circuit minimum current
condition will be generated.
Specified as a percent of the branch breaker rating.
A value of zero indicates that the threshold is disabled.
Note: When setting branch circuit thresholds/ratings for an entry,
all positions tied (see the xPDUBranchBreakerTieIndicator OID)
to this entry will inherit the new threshold/rating."
::= { xPDUBranchBreakerEntry 9 }
xPDUBranchBreakerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the purpose/use of the breaker."
::= { xPDUBranchBreakerEntry 10 }
xPDUBranchBreakerLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the location of the breaker."
::= { xPDUBranchBreakerEntry 11 }
-- the xPDUInputContacts group
xPDUInputContactNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts supported by the PDU."
::= { xPDUInputContacts 1 }
xPDUInputContactTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input contact entries."
::= { xPDUInputContacts 2 }
xPDUInputContactTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUInputContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the PDU.
The number of entries is contained in the
xPDUInputContactTableSize OID."
::= { xPDUInputContacts 3 }
xPDUInputContactEntry OBJECT-TYPE
SYNTAX XPDUInputContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A contact entry containing information for a given contact."
INDEX { xPDUInputContactNumber }
::= { xPDUInputContactTable 1 }
XPDUInputContactEntry ::=
SEQUENCE {
xPDUInputContactNumber INTEGER,
xPDUInputContactName DisplayString,
xPDUInputContactNormalState INTEGER,
xPDUInputContactCurrentState INTEGER
}
xPDUInputContactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index identifying the contact on the PDU."
::= { xPDUInputContactEntry 1 }
xPDUInputContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the purpose/use of the contact."
::= { xPDUInputContactEntry 2 }
xPDUInputContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal operating position of the contact."
::= { xPDUInputContactEntry 3 }
xPDUInputContactCurrentState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the contact."
::= { xPDUInputContactEntry 4 }
-- the xPDUOutputRelays group
xPDUOutputRelaysNumRelays OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output relays supported by the PDU."
::= { xPDUOutputRelays 1 }
xPDUOutputRelaysTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output relay entries."
::= { xPDUOutputRelays 2 }
xPDUOutputRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF XPDUOutputRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output relays supported by the PDU.
The number of entries is contained in the
xPDUOutputRelayTableSize OID."
::= { xPDUOutputRelays 3 }
xPDUOutputRelayEntry OBJECT-TYPE
SYNTAX XPDUOutputRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A output relay entry containing information for a given contact."
INDEX { xPDUOutputRelayNumber }
::= { xPDUOutputRelayTable 1 }
XPDUOutputRelayEntry ::=
SEQUENCE {
xPDUOutputRelayNumber INTEGER,
xPDUOutputRelayName DisplayString,
xPDUOutputRelayNormalState INTEGER,
xPDUOutputRelayCurrentState INTEGER
}
xPDUOutputRelayNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index identifying the output relay on the PDU."
::= { xPDUOutputRelayEntry 1 }
xPDUOutputRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the purpose/use of the output relay."
::= { xPDUOutputRelayEntry 2 }
xPDUOutputRelayNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal operating position of the output relay."
::= { xPDUOutputRelayEntry 3 }
xPDUOutputRelayCurrentState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the output relay."
::= { xPDUOutputRelayEntry 4 }
-- the xPDUMiscGroup
xPDUEPOMode OBJECT-TYPE
SYNTAX INTEGER {
armed (1),
disarmed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the EPO System is armed(1) or disarmed(2)."
::= { xPDUMiscGroup 1 }
xPDUTransformTempStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
overtemp (2),
noTransformerPresent (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the PDU's isolation transformer is over temperature."
::= { xPDUMiscGroup 2 }
xPDUCoolingFanStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
failed (2),
noCoolingFansPresent (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if one or more of the PDU's cooling fans have failed."
::= { xPDUMiscGroup 3 }
-- The pmmIdent group
pmmIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of the PMM.
This value is set at the factory."
::= { pmmIdent 1 }
pmmIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the PMM.
This value is set at the factory."
::= { pmmIdent 2 }
pmmIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the PMM was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { pmmIdent 3 }
pmmIdentHMISerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the HMI.
This value is set at the factory."
::= { pmmIdent 4 }
pmmIdentHMIHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the HMI.
This value is set at the factory."
::= { pmmIdent 5 }
pmmIdentHMIFirmwareAppRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application firmware revision of the
HMI."
::= { pmmIdent 6 }
pmmIdentHMIFirmwareAppOSRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application operating system firmware revision of the
HMI."
::= { pmmIdent 7 }
-- The pmmDevice group
pmmDeviceNominalInputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input voltage to the PMM. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a
4-wire (wye) service."
::= { pmmDevice 1 }
pmmDeviceServiceType OBJECT-TYPE
SYNTAX INTEGER{
threeWire (1),
fourWire (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of utility input to the PMM. Either 3 wires (delta), or 4 wires (wye)."
::= { pmmDevice 2 }
pmmDeviceNominalOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal line-to-neutral output voltage to the load measured in Volts."
::= { pmmDevice 3 }
-- The pmmInput group
pmmInputMeterTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input meters attached to the system."
::= { pmmInput 1 }
pmmInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMMInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input meter entries."
::= { pmmInput 2}
pmmInputEntry OBJECT-TYPE
SYNTAX PMMInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input meter."
INDEX { pmmInputMeterIndex }
::= { pmmInputTable 1 }
PMMInputEntry ::= SEQUENCE {
pmmInputMeterIndex INTEGER,
pmmInputFrequency INTEGER,
pmmInputTotalActivePower INTEGER,
pmmInputTotalApparentPower INTEGER,
pmmInputTotalPowerFactor INTEGER,
pmmInputActiveEnergyDelivered Integer32,
pmmInputActiveEnergyReceived Integer32,
pmmInputApparentEnergyDelivered Integer32,
pmmInputApparentEnergyReceived Integer32,
pmmInputFrequencyDeviation INTEGER,
pmmInputPowerFactorDeviation INTEGER,
pmmInputMinVoltThreshold INTEGER,
pmmInputLowVoltThreshold INTEGER,
pmmInputHighVoltThreshold INTEGER,
pmmInputMaxVoltThreshold INTEGER,
pmmInputMinCurrentThreshold INTEGER,
pmmInputLowCurrentThreshold INTEGER,
pmmInputHighCurrentThreshold INTEGER,
pmmInputMaxCurrentThreshold INTEGER,
pmmInputMinApparentPowerThreshold INTEGER,
pmmInputMaxApparentPowerThreshold INTEGER,
pmmInputOverActivePowerThreshold INTEGER,
pmmInputBreakerState INTEGER,
pmmInputBreakerOpenAlarm INTEGER,
pmmInputAverageCurrent INTEGER,
pmmInputNeturalCurrent INTEGER,
pmmInputMaxInstantaneousNeutralCurrent INTEGER,
pmmInputAverageCurrentTHD INTEGER,
pmmInputAverageVoltageLtoL INTEGER,
pmmInputAverageVoltageLtoN INTEGER,
pmmInputLoad INTEGER,
pmmInputMeterFirmwareVersion INTEGER,
pmmInputMeterSerialNumber DisplayString,
pmmInputEnergyUsageAccumulatedTotal INTEGER,
pmmInputPhaseLoss INTEGER,
pmmInputBreakerCTSize INTEGER,
pmmInputBreakerRating INTEGER,
pmmInputKWHResetDate DisplayString,
pmmInputAlarmGeneration INTEGER,
pmmInputVoltageMaximumAlarm INTEGER,
pmmInputVoltageHighAlarm INTEGER,
pmmInputVoltageLowAlarm INTEGER,
pmmInputVoltageMinimumAlarm INTEGER,
pmmInputCurrentMaximumAlarm INTEGER,
pmmInputCurrentHighAlarm INTEGER,
pmmInputCurrentLowAlarm INTEGER,
pmmInputCurrentMinimumAlarm INTEGER,
pmmInputApparentPowerMaximumAlarm INTEGER,
pmmInputApparentPowerMinimumAlarm INTEGER,
pmmInputKWOverAlarm INTEGER,
pmmInputPhaseLossAlarm INTEGER,
pmmInputPowerFactorTotalAlarm INTEGER,
pmmInputFrequencyDeviationAlarm INTEGER
}
pmmInputMeterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input meter identifier."
::= { pmmInputEntry 1 }
pmmInputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input frequency in tenths of Hertz."
::= { pmmInputEntry 2 }
pmmInputTotalActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total input active power in tenths of kW."
::= { pmmInputEntry 3 }
pmmInputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total input apparent power in tenths of kVA."
::= { pmmInputEntry 4 }
pmmInputTotalPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths."
::= { pmmInputEntry 5 }
pmmInputActiveEnergyDelivered OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input active energy delivered in tenths of kWh."
::= { pmmInputEntry 6 }
pmmInputActiveEnergyReceived OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input active energy received in tenths of kWh."
::= { pmmInputEntry 7 }
pmmInputApparentEnergyDelivered OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input apparent energy delivered in tenths of kVAh."
::= { pmmInputEntry 8 }
pmmInputApparentEnergyReceived OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input apparent energy received in tenths of kVAh."
::= { pmmInputEntry 9 }
pmmInputFrequencyDeviation OBJECT-TYPE
SYNTAX INTEGER{
freqDeviationOff (1),
freqDeviationPointTwo (2),
freqDeviationPointFive (3),
freqDeviationOne (4),
freqDeviationOnePointFive (5),
freqDeviationTwo (6),
freqDeviationThree (7),
freqDeviationFour (8),
freqDeviationFive (9),
freqDeviationNine (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the input frequency deviation in Hertz."
::= { pmmInputEntry 10 }
pmmInputPowerFactorDeviation OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the input power factor deviation. Specified in tenths.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 11 }
pmmInputMinVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an input minimum voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 12 }
pmmInputLowVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an input low voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 13 }
pmmInputHighVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input high voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 14 }
pmmInputMaxVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input maximum voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 15 }
pmmInputMinCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an input minimum current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 16 }
pmmInputLowCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an input low current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 17 }
pmmInputHighCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..110)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input high current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 18 }
pmmInputMaxCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input maximum current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 19 }
pmmInputMinApparentPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an input minimum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 20 }
pmmInputMaxApparentPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..110)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input maximum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 21 }
pmmInputOverActivePowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an input over active power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmInputEntry 22 }
pmmInputBreakerState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of input breaker.
1 will indicate open,
2 will indicate closed,
3 will indicate unknown."
::= { pmmInputEntry 23 }
pmmInputBreakerOpenAlarm OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
unknown (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Breaker open alarm status.
1 will indicate enabled,
2 will indicate disabled,
3 will indicate unknown."
::= { pmmInputEntry 24 }
pmmInputAverageCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input Average current. Measured in tenths of Amps."
::= { pmmInputEntry 25 }
pmmInputNeturalCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input Netural current. Measured in tenths of Amps."
::= { pmmInputEntry 26 }
pmmInputMaxInstantaneousNeutralCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input maximum instantaneous neutral current. Measured in tenths of Amps."
::= { pmmInputEntry 27 }
pmmInputAverageCurrentTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input average harmonic distortions.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 28 }
pmmInputAverageVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input Average Line to Line voltage. Measured in tenths of Volts.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 29 }
pmmInputAverageVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input Average Line to Neutral voltage. Measured in tenths of Volts.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 30 }
pmmInputLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total load of input breaker in percentage.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 31 }
pmmInputMeterFirmwareVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input meter firmware revision.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 32 }
pmmInputMeterSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input meter serial number.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 33 }
pmmInputEnergyUsageAccumulatedTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total accumulated input energy usage in kwh.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 34 }
pmmInputPhaseLoss OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Threshold below which an input phase loss condition will be generated.
Specified as a percent deviation from phase to neutral nominal voltage.
A value of zero indicates that the threshold is disabled.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 35 }
pmmInputBreakerCTSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input breaker CT size.
Returns -1 if unsupported or failed."
::= { pmmInputEntry 36 }
pmmInputBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the input breaker rating in Amps(A).
Returns -1 if unsupported or failed."
::= { pmmInputEntry 37 }
pmmInputKWHResetDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date that the kWh usage was reset, in the format mm/dd/yyyy."
::= { pmmInputEntry 38 }
pmmInputAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 39 }
pmmInputVoltageMaximumAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 40 }
pmmInputVoltageHighAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage high alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 41 }
pmmInputVoltageLowAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage low alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 42 }
pmmInputVoltageMinimumAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 43 }
pmmInputCurrentMaximumAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 44 }
pmmInputCurrentHighAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current high alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 45 }
pmmInputCurrentLowAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current low alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 46 }
pmmInputCurrentMinimumAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 47 }
pmmInputApparentPowerMaximumAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apparent Power maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 48 }
pmmInputApparentPowerMinimumAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apparent Power minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 49 }
pmmInputKWOverAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Over active power alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 50 }
pmmInputPhaseLossAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Phase loss alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 51 }
pmmInputPowerFactorTotalAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total power factor alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 52 }
pmmInputFrequencyDeviationAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frequency deviation alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmInputEntry 53 }
pmmInputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMMInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries.
The number of entries is given by the value of
pmmInputMeterTableSize OID."
::= { pmmInput 3 }
pmmInputPhaseEntry OBJECT-TYPE
SYNTAX PMMInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input phase."
INDEX { pmmInputMeterNum, pmmInputPhase }
::= { pmmInputPhaseTable 1 }
PMMInputPhaseEntry ::= SEQUENCE {
pmmInputMeterNum INTEGER,
pmmInputPhase INTEGER,
pmmInputVoltageLtoL INTEGER,
pmmInputVoltageLtoN INTEGER,
pmmInputPhaseCurrent INTEGER,
pmmInputActivePower INTEGER,
pmmInputApparentPower INTEGER,
pmmInputPowerFactor INTEGER,
pmmInputMaxInstantaneousCurrent INTEGER,
pmmInputPhaseAngle INTEGER,
pmmInputTHDLtoL INTEGER,
pmmInputTHDLtoN INTEGER,
pmmInputCurrentTHD INTEGER
}
pmmInputMeterNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input meter identifier."
::= { pmmInputPhaseEntry 1 }
pmmInputPhase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input phase index."
::= { pmmInputPhaseEntry 2 }
pmmInputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line input voltage available.
Measured in tenths of Volts."
::= { pmmInputPhaseEntry 3 }
pmmInputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral input voltage available.
Measured in tenths of Volts."
::= { pmmInputPhaseEntry 4 }
pmmInputPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input current per phase. Measured in tenths of Amps."
::= { pmmInputPhaseEntry 5 }
pmmInputActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input power per phase. Measured in tenths of kW."
::= { pmmInputPhaseEntry 6 }
pmmInputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input power per phase. Measured in tenths of kVA."
::= { pmmInputPhaseEntry 7 }
pmmInputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power factor of the input per phase.
A value of 100 representing a unity power factor (1.00).
Specified in hundredths."
::= { pmmInputPhaseEntry 8 }
pmmInputMaxInstantaneousCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input maximum phase instantaneous current. Measured in tenths of Amps."
::= { pmmInputPhaseEntry 9 }
pmmInputPhaseAngle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current phase Angle. Measured in tenths of decimal"
::= { pmmInputPhaseEntry 10 }
pmmInputTHDLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input harmonic distortions line to line."
::= { pmmInputPhaseEntry 11 }
pmmInputTHDLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input harmonic distortions line to netural."
::= { pmmInputPhaseEntry 12 }
pmmInputCurrentTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Input harmonic distortions.
Returns -1 if unsupported or failed.
Specified in tenths."
::= { pmmInputPhaseEntry 13 }
-- The pmmOutput group
pmmOutputMeterTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output meters attached to the system."
::= { pmmOutput 1 }
pmmOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMMOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output meter entries."
::= { pmmOutput 2}
pmmOutputEntry OBJECT-TYPE
SYNTAX PMMOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output meter."
INDEX { pmmOutputMeterIndex }
::= { pmmOutputTable 1 }
PMMOutputEntry ::= SEQUENCE {
pmmOutputMeterIndex INTEGER,
pmmOutputFrequency INTEGER,
pmmOutputTotalActivePower INTEGER,
pmmOutputTotalApparentPower INTEGER,
pmmOutputTotalPowerFactor INTEGER,
pmmOutputActiveEnergyDelivered Integer32,
pmmOutputActiveEnergyReceived Integer32,
pmmOutputApparentEnergyDelivered Integer32,
pmmOutputApparentEnergyReceived Integer32,
pmmOutputFrequencyDeviation INTEGER,
pmmOutputPowerFactorDeviation INTEGER,
pmmOutputMinVoltThreshold INTEGER,
pmmOutputLowVoltThreshold INTEGER,
pmmOutputHighVoltThreshold INTEGER,
pmmOutputMaxVoltThreshold INTEGER,
pmmOutputMinCurrentThreshold INTEGER,
pmmOutputLowCurrentThreshold INTEGER,
pmmOutputHighCurrentThreshold INTEGER,
pmmOutputMaxCurrentThreshold INTEGER,
pmmOutputMinApparentPowerThreshold INTEGER,
pmmOutputMaxApparentPowerThreshold INTEGER,
pmmOutputOverActivePowerThreshold INTEGER,
pmmOutputPhaseLossThreshold INTEGER,
pmmOutputBreakerState INTEGER,
pmmOutputBreakerOpenAlarm INTEGER
}
pmmOutputMeterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output meter identifier."
::= { pmmOutputEntry 1 }
pmmOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output frequency in tenths of Hertz."
::= { pmmOutputEntry 2 }
pmmOutputTotalActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total output active power in tenths of kW."
::= { pmmOutputEntry 3 }
pmmOutputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total output apparent power in tenths of kVA."
::= { pmmOutputEntry 4 }
pmmOutputTotalPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths."
::= { pmmOutputEntry 5 }
pmmOutputActiveEnergyDelivered OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the output active energy delivered in tenths of kWh."
::= { pmmOutputEntry 6 }
pmmOutputActiveEnergyReceived OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the output active energy received in tenths of kWh."
::= { pmmOutputEntry 7 }
pmmOutputApparentEnergyDelivered OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the output apparent energy delivered in tenths of kVAh."
::= { pmmOutputEntry 8 }
pmmOutputApparentEnergyReceived OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the output apparent energy received in tenths of kVAh."
::= { pmmOutputEntry 9 }
pmmOutputFrequencyDeviation OBJECT-TYPE
SYNTAX INTEGER{
freqDeviationOff (1),
freqDeviationPointTwo (2),
freqDeviationPointFive (3),
freqDeviationOne (4),
freqDeviationOnePointFive (5),
freqDeviationTwo (6),
freqDeviationThree (7),
freqDeviationFour (8),
freqDeviationFive (9),
freqDeviationNine (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the output frequency deviation in Hertz."
::= { pmmOutputEntry 10 }
pmmOutputPowerFactorDeviation OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the output power factor deviation. Specified in tenths.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 11 }
pmmOutputMinVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output minimum voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalOutputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 12 }
pmmOutputLowVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output low voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalOutputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 13 }
pmmOutputHighVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output high voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalOutputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 14 }
pmmOutputMaxVoltThreshold OBJECT-TYPE
SYNTAX INTEGER (0..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output maximum voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalOutputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 15 }
pmmOutputMinCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output minimum current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 16 }
pmmOutputLowCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output low current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 17 }
pmmOutputHighCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..110)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output high current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 18 }
pmmOutputMaxCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output maximum current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 19 }
pmmOutputMinApparentPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output minimum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 20 }
pmmOutputMaxApparentPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..110)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output maximum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 21 }
pmmOutputOverActivePowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output over active power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 22 }
pmmOutputPhaseLossThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output phase loss condition will be generated.
Specified as a percent deviation from nominal voltage represented
in the OID pmmDeviceNominalOutputVoltage.
A value of zero indicates that the threshold is disabled."
::= { pmmOutputEntry 23 }
pmmOutputBreakerState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of output breaker.
1 will indicate open,
2 will indicate closed,
3 will indicate unknown."
::= { pmmOutputEntry 24 }
pmmOutputBreakerOpenAlarm OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
unknown (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Breaker open alarm status.
1 will indicate enabled,
2 will indicate disabled,
3 will indicate unknown."
::= { pmmOutputEntry 25 }
pmmOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMMOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries.
The number of entries is given by the value of
pmmOutputMeterTableSize OID."
::= { pmmOutput 3 }
pmmOutputPhaseEntry OBJECT-TYPE
SYNTAX PMMOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output phase."
INDEX { pmmOutputMeterNum, pmmOutputPhase }
::= { pmmOutputPhaseTable 1 }
PMMOutputPhaseEntry ::= SEQUENCE {
pmmOutputMeterNum INTEGER,
pmmOutputPhase INTEGER,
pmmOutputVoltageLtoL INTEGER,
pmmOutputVoltageLtoN INTEGER,
pmmOutputPhaseCurrent INTEGER,
pmmOutputActivePower INTEGER,
pmmOutputApparentPower INTEGER,
pmmOutputPowerFactor INTEGER
}
pmmOutputMeterNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output meter identifier."
::= { pmmOutputPhaseEntry 1 }
pmmOutputPhase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Output phase index."
::= { pmmOutputPhaseEntry 2 }
pmmOutputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line output voltage available.
Measured in tenths of Volts."
::= { pmmOutputPhaseEntry 3 }
pmmOutputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral output voltage available.
Measured in tenths of Volts."
::= { pmmOutputPhaseEntry 4 }
pmmOutputPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Load current per phase. Measured in tenths of Amps."
::= { pmmOutputPhaseEntry 5 }
pmmOutputActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Output power per phase. Measured in tenths of kW."
::= { pmmOutputPhaseEntry 6 }
pmmOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Output power per phase. Measured in tenths of kVA."
::= { pmmOutputPhaseEntry 7 }
pmmOutputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power factor of the output per phase.
A value of 100 representing a unity power factor (1.00).
Specified in hundredths."
::= { pmmOutputPhaseEntry 8 }
-- The pmmBranch group
pmmnumofBranchMeters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of branch meters attached to the system."
::= { pmmBranch 1 }
pmmBranchBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of branch breaker entries."
::= { pmmBranch 2 }
pmmBranchBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMMBranchBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of branch breaker table entries.
The number of entries is contained in the pmmBranchBreakerTableSize OID."
::= { pmmBranch 3 }
pmmBranchBreakerEntry OBJECT-TYPE
SYNTAX PMMBranchBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular branch breaker (panel/circuit position)."
INDEX {pmmBranchCircuitMeterIndex, pmmBranchCircuitIndex }
::= { pmmBranchBreakerTable 1 }
PMMBranchBreakerEntry ::= SEQUENCE {
pmmBranchCircuitMeterIndex INTEGER,
pmmBranchCircuitIndex INTEGER,
pmmBranchCircuitNumberOfPoles INTEGER,
pmmBranchCircuitPhase DisplayString,
pmmBranchCircuitBreakerIdentifier DisplayString,
pmmBranchCircuitLoadIdentifier DisplayString,
pmmBranchCircuitCurrent INTEGER,
pmmBranchCircuitBreakerRating INTEGER,
pmmBranchCircuitTotalActivePower INTEGER,
pmmBranchCircuitTotalApparentPower INTEGER,
pmmBranchCircuitEnergyUsage Gauge,
pmmBranchCircuitEnergyUsageResetDate DisplayString,
pmmBranchCircuitTotalPowerFactor INTEGER,
pmmBranchCircuitBreakerState INTEGER,
pmmBranchCircuitMinCurrentThreshold INTEGER,
pmmBranchCircuitLowCurrentThreshold INTEGER,
pmmBranchCircuitHighCurrentThreshold INTEGER,
pmmBranchCircuitMaxCurrentThreshold INTEGER,
pmmBranchCircuitMinApparentPowerThreshold INTEGER,
pmmBranchCircuitMaxApparentPowerThreshold INTEGER,
pmmBranchCircuitAlaramGeneration INTEGER,
pmmBranchCircuitBreakerOpenAlarm INTEGER,
pmmBranchCircuitBreakerAverageCurrent INTEGER,
pmmBranchCircuitMaxInstantaneousCurrentPhase INTEGER,
pmmBranchCircuitBreakerMaxInstantaneousAverageCurrent INTEGER,
pmmBranchCircuitAngle INTEGER,
pmmBranchCircuitActivePower INTEGER,
pmmBranchCircuitApparentPower INTEGER,
pmmBranchCircuitBreakerEnergyTotalUsage Gauge,
pmmBranchCircuitPowerFactor INTEGER,
pmmBranchCircuitTHD INTEGER,
pmmBranchCircuitBreakerTHD INTEGER,
pmmBranchCircuitBreakerLoad INTEGER,
pmmBranchCircuitBranchNumber INTEGER,
pmmBranchCircuitChannelCTSize INTEGER,
pmmBranchcircuitCurrentMaxAlarm INTEGER,
pmmBranchcircuitCurrentHighAlarm INTEGER,
pmmBranchcircuitCurrentLowAlarm INTEGER,
pmmBranchcircuitCurrentMinAlarm INTEGER,
pmmBranchcircuitApparentPowerMaxAlarm INTEGER,
pmmBranchcircuitApparentPowerMinAlarm INTEGER
}
pmmBranchCircuitMeterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of branch circuit meter in the table."
::= { pmmBranchBreakerEntry 1 }
pmmBranchCircuitIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The branch circuit index."
::= { pmmBranchBreakerEntry 2 }
pmmBranchCircuitNumberOfPoles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of poles."
::= { pmmBranchBreakerEntry 3 }
pmmBranchCircuitPhase OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase associated with branch circuit."
::= { pmmBranchBreakerEntry 4 }
pmmBranchCircuitBreakerIdentifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The branch circuit identifier."
::= { pmmBranchBreakerEntry 5 }
pmmBranchCircuitLoadIdentifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the name or location of the branch circuit load."
::= { pmmBranchBreakerEntry 6 }
pmmBranchCircuitCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The branch circuit current Measured in tenths of Amps."
::= { pmmBranchBreakerEntry 7 }
pmmBranchCircuitBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rating of the branch circuit breaker in Amps."
::= { pmmBranchBreakerEntry 8 }
pmmBranchCircuitTotalActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit total power. Measured in tenths
of kW."
::= { pmmBranchBreakerEntry 9 }
pmmBranchCircuitTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit total apparent power. Measured in
tenths of kVA."
::= { pmmBranchBreakerEntry 10 }
pmmBranchCircuitEnergyUsage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the accumulated energy usage in tenths of kWh.
Displayed as 0 when not available or no energy used."
::= { pmmBranchBreakerEntry 11 }
pmmBranchCircuitEnergyUsageResetDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date that the kWh usage was reset, in the format mm/dd/yyyy."
::= { pmmBranchBreakerEntry 12 }
pmmBranchCircuitTotalPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total power factor of the branch circuit output.
A value of 100 representing a unity power factor (1.00)
Specified in hundredths."
::= { pmmBranchBreakerEntry 13 }
pmmBranchCircuitBreakerState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of branch
circuit breaker.
1 will indicate open,
2 will indicate closed,
3 will indicate unknown."
::= { pmmBranchBreakerEntry 14 }
pmmBranchCircuitMinCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a branch circuit minimum current
condition will be generated.
Specified as a percent of the branch breaker rating
represented in the OID pmmBranchCircuitBreakerRating
A value of zero indicates that the threshold is disabled."
::= { pmmBranchBreakerEntry 15 }
pmmBranchCircuitLowCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a branch circuit low current
condition will be generated.
Specified as a percent of the branch breaker rating
represented in the OID pmmBranchCircuitBreakerRating
A value of zero indicates that the threshold is disabled."
::= { pmmBranchBreakerEntry 16 }
pmmBranchCircuitHighCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a branch circuit high current
condition will be generated.
Specified as a percent of the branch breaker rating
represented in the OID pmmBranchCircuitBreakerRating
A value of zero indicates that the threshold is disabled."
::= { pmmBranchBreakerEntry 17 }
pmmBranchCircuitMaxCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a branch circuit maximum current
condition will be generated.
Specified as a percent of the branch breaker rating
represented in the OID pmmBranchCircuitBreakerRating
A value of zero indicates that the threshold is disabled."
::= { pmmBranchBreakerEntry 18 }
pmmBranchCircuitMinApparentPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a branch circuit minimum apparent
power condition will be generated.
Specified as a percent of the branch breaker apparent power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmBranchBreakerEntry 19 }
pmmBranchCircuitMaxApparentPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a branch circuit maximum apparent
power condition will be generated.
Specified as a percent of the branch breaker apparent power rating.
A value of zero indicates that the threshold is disabled."
::= { pmmBranchBreakerEntry 20 }
pmmBranchCircuitAlaramGeneration OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm generation status.
1 will indicate enabled,
2 will indicate disabled,
3 will indicate unknown."
::= { pmmBranchBreakerEntry 21 }
pmmBranchCircuitBreakerOpenAlarm OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
unknown (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Breaker open alarm status.
1 will indicate enabled,
2 will indicate disabled,
3 will indicate unknown."
::= { pmmBranchBreakerEntry 22 }
pmmBranchCircuitBreakerAverageCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch breaker current. Measured in tenths of Amps."
::= { pmmBranchBreakerEntry 23 }
pmmBranchCircuitMaxInstantaneousCurrentPhase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit maximum instantaneous current. Measured in tenths of Amps."
::= { pmmBranchBreakerEntry 24 }
pmmBranchCircuitBreakerMaxInstantaneousAverageCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch breaker maximum instantaneous current. Measured in tenths of Amps."
::= { pmmBranchBreakerEntry 25 }
pmmBranchCircuitAngle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit phase angle. Measured in tenths of Decimal."
::= { pmmBranchBreakerEntry 26 }
pmmBranchCircuitActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit Active power. Measured in tenths of kW."
::= { pmmBranchBreakerEntry 27 }
pmmBranchCircuitApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit apparent power. Measured in tenths of kVA."
::= { pmmBranchBreakerEntry 28 }
pmmBranchCircuitBreakerEnergyTotalUsage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the circuit Breaker total accumulated energy usage in tenths of kWh.
Displayed as 0 when not available or no energy used."
::= { pmmBranchBreakerEntry 29 }
pmmBranchCircuitPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power factor of the branch circuit.
A value of 100 representing a unity power factor (1.00)
Specified in hundredths."
::= { pmmBranchBreakerEntry 30 }
pmmBranchCircuitTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch circuit harmonic distortion."
::= { pmmBranchBreakerEntry 31 }
pmmBranchCircuitBreakerTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch Breaker harmonic distortion."
::= { pmmBranchBreakerEntry 32 }
pmmBranchCircuitBreakerLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total load on the Breaker.
Measured in tenths of Amps."
::= { pmmBranchBreakerEntry 33 }
pmmBranchCircuitBranchNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The branch number.
Returns -1 if unsupported or failed."
::= { pmmBranchBreakerEntry 34 }
pmmBranchCircuitChannelCTSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The branch CT Size.
Returns -1 if unsupported or failed."
::= { pmmBranchBreakerEntry 35 }
pmmBranchcircuitCurrentMaxAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmBranchBreakerEntry 36 }
pmmBranchcircuitCurrentHighAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current high alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmBranchBreakerEntry 37 }
pmmBranchcircuitCurrentLowAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current low alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmBranchBreakerEntry 38 }
pmmBranchcircuitCurrentMinAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmBranchBreakerEntry 39 }
pmmBranchcircuitApparentPowerMaxAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apparent power maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmBranchBreakerEntry 40 }
pmmBranchcircuitApparentPowerMinAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apparent power minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown "
::= { pmmBranchBreakerEntry 41 }
-- pmmsite Configuration begins
pmmSiteConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of site configuration set supported by system."
::= { pmmSiteConfig 1 }
pmmSiteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmmSiteConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PMM site configurable entries."
::= { pmmSiteConfig 2}
pmmSiteConfigEntry OBJECT-TYPE
SYNTAX PmmSiteConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular site configuration."
INDEX { pmmSiteConfigIndex}
::= { pmmSiteConfigTable 1 }
PmmSiteConfigEntry ::=
SEQUENCE {
pmmSiteConfigIndex INTEGER,
pmmSiteConfigNominalPtoPVoltage INTEGER,
pmmSiteConfigNominalPtoNVoltage INTEGER,
pmmSiteConfigNominalCurrent INTEGER,
pmmSiteConfigNominalFrequency INTEGER,
pmmSiteConfigNominalApparentPower INTEGER,
pmmSiteConfigServiceType INTEGER
}
pmmSiteConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PMM site configuration identifier."
::= { pmmSiteConfigEntry 1 }
pmmSiteConfigNominalPtoPVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input phase to phase voltage to the PMM. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a
4-wire (wye) service."
::= { pmmSiteConfigEntry 2 }
pmmSiteConfigNominalPtoNVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input phase to neutral voltage to the PMM. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a
4-wire (wye) service."
::= { pmmSiteConfigEntry 3 }
pmmSiteConfigNominalCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input current to the PMM. Measured in tenths of Amps."
::= { pmmSiteConfigEntry 4 }
pmmSiteConfigNominalFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input frequency to the PMM. Measured in tenths of Hertz."
::= { pmmSiteConfigEntry 5 }
pmmSiteConfigNominalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input apparent power to the PMM. Measured in tenths of kVA."
::= { pmmSiteConfigEntry 6 }
pmmSiteConfigServiceType OBJECT-TYPE
SYNTAX INTEGER{
threeWire (1),
fourWire (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of utility input to the PMM. Either 3 wires (delta), or 4 wires (wye)."
::= { pmmSiteConfigEntry 7 }
pmmSiteConfigNumberofPanel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of panels present.
Returns -1 if unsupported or failed."
::= { pmmSiteConfig 3 }
pmmSiteConfigNumberofChannel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of channels present.
Returns -1 if unsupported or failed."
::= { pmmSiteConfig 4 }
pmmSiteConfigNumberofsources OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input sources present.
Returns -1 if unsupported or failed."
::= { pmmSiteConfig 5 }
pmmSiteConfigProductModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A character string identifying the model number of the RPP.
This value is set at the factory.
Returns -1 if unsupported or failed."
::= { pmmSiteConfig 6 }
pmmSiteConfigProductSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the RPP.
This value is set at the factory.
Returns -1 if unsupported or failed."
::= { pmmSiteConfig 7 }
-- pmm site config end
-- pmm end
-- charger group
chargerIdentModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model name of the Charger.
This value is set at the factory."
::= { chargerIdent 1 }
chargerBasicIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An 8 byte ID string identifying the Charger. This object
can be set by the administrator."
::= { chargerIdent 2 }
chargerIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the Charger.
This value is set at the factory."
::= { chargerIdent 3 }
chargerIdentModelType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The detailed model information of the Charger."
::= { chargerIdent 4 }
-- Input Phase Table
chargerInputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChargerInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the sum of the Charger input phases."
::= { chargerInput 1 }
chargerInputPhaseEntry OBJECT-TYPE
SYNTAX ChargerInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input phase."
INDEX { chargerInputPhaseTableIndex}
::= { chargerInputPhaseTable 1 }
ChargerInputPhaseEntry ::= SEQUENCE {
chargerInputPhaseTableIndex INTEGER,
chargerInputPhaseVoltage INTEGER,
chargerInputPhaseMinVoltage INTEGER,
chargerInputPhaseMaxVoltage INTEGER,
chargerInputPhaseCurrent INTEGER
}
chargerInputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { chargerInputPhaseEntry 1 }
chargerInputPhaseVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage in VAC, or -1 if it's unsupported
by this Charger."
::= { chargerInputPhaseEntry 2 }
chargerInputPhaseMinVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lowest input voltage to the Charger during the previous minute of operation, or -1 if it's unsupported
by this Charger."
::= { chargerInputPhaseEntry 3 }
chargerInputPhaseMaxVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The highest input voltage to the Charger during the previous minute of operation, or -1 if it's unsupported
by this Charger."
::= { chargerInputPhaseEntry 4 }
chargerInputPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input current in 0.1 amperes, or -1 if it's
unsupported by this Charger."
::= { chargerInputPhaseEntry 5 }
-- end of Input table
-- the charger output group
chargerOutputStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
initialising(2),
standby(3),
onBattery(4),
floatCharging(5),
boostCharging(6),
initialCharging(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the Charger. If the Charger is unable to
determine the state of the Charger this variable is set
to unknown(1)."
::= { chargerOutput 1 }
chargerOutputVauxVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Load output voltage, measured in VDC."
::= { chargerOutput 2 }
chargerOutputTotalCurrent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current in amperes drawn by the load on the Charger."
::= { chargerOutput 3 }
chargerOutputLoad OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current Charger load expressed in percent
of the total rated current of the charger."
::= { chargerOutput 4 }
-- charger end
-- The xATSIdent group
xATSIdentProductName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the transfer switch unit."
::= { xATSIdent 1 }
xATSIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the transfer switch.
This value is set at the factory."
::= { xATSIdent 2 }
xATSIdentFirmwareAppRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application firmware revision of the transfer switch."
::= { xATSIdent 3 }
xATSIdentFirmwareAppOSRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application operating system firmware revision of the transfer switch."
::= { xATSIdent 4 }
xATSIdentFirmwareControllerRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the transfer switch controller firmware revision."
::= { xATSIdent 5 }
xATSIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the transfer switch was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { xATSIdent 6 }
xATSIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of the transfer switch.
This value is set at the factory."
::= { xATSIdent 7 }
xATSIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the transfer switch.
This value is set at the factory."
::= { xATSIdent 8 }
-- The xATSDevice group
xATSDeviceServiceType OBJECT-TYPE
SYNTAX INTEGER {
threeWire (1),
fourWire (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of utility input to the transfer switch.
Either 3 wires (delta), or 4 wires (wye)."
::= { xATSDevice 1 }
xATSDeviceNominalVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal line-to-neutral system voltage.
Measured in Volts, line-to-line for a 3-wire service or
line-to-neutral for a 4-wire service. -1 if not available."
::= { xATSDevice 2 }
xATSDeviceNominalFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal system frequency. Measured in tenths of Hertz.
-1 if not available."
::= { xATSDevice 3 }
xATSDeviceTransferSwitchRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rating of the transfer switch.
Measured in Amps."
::= { xATSDevice 4 }
xATSDeviceDCBackUpPresent OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if a DC backup is present or not."
::= { xATSDevice 5 }
-- The xATS Switch Status group
xATSSwitchStatusSelectedSource OBJECT-TYPE
SYNTAX INTEGER{
none (1),
source1 (2),
source2 (3),
fault (4),
unknown (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source which is currently selected, i.e. supplying power to the load."
::= { xATSSwitchStatus 1 }
xATSSwitchStatusOperationalMode OBJECT-TYPE
SYNTAX INTEGER{
automatic (1),
notInAutoAbnormal (2),
notInAuto (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operating mode of the transfer switch. When the ATS is in
automatic mode, generator starting and ATS transferring is all done automatically
as needed based on the state of source 1. Automatic operation is halted when the
ATS is in either of the notInAuto modes.
A mode of notInAuto indicates that the automatic operation switch is in the
disabled position, as indicated by the xATSSwitchStatusAutomaticOperationSwitch OID.
The notInAutoAbnormal condition indicates that an abnormal
condition has caused the transfer switch to halt automatic operation.
In this case, traps can indicate the exact problem. In the case of
notInAutoAbnormal, refer to the operation manual for details
on how debug the condition and restore automatic operation."
::= { xATSSwitchStatus 2 }
xATSSwitchStatusAutomaticOperationSwitch OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
enabled (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the automatic operation switch on the front of the transfer switch."
::= { xATSSwitchStatus 3 }
xATSSwitchStatusEngineStartSignal OBJECT-TYPE
SYNTAX INTEGER{
run (1),
stop (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the Start/Stop contact which signals the generator
engine to start/run. When the ATS is in automatic mode,
generator starting/stopping is under ATS control."
::= { xATSSwitchStatus 4 }
-- The xATS Switch Setting group
xATSSwitchSettingsLowVoltageTransferPoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The lowest acceptable voltage condition at source 1.
When any phase of source 1 is lower than this voltage,
source quality is considered bad and the generator run signal
is asserted to begin generator operation.
Specified in volts, line-to-line for a 3-wire service or
line-to-neutral for a 4-wire service.
-1 if not available."
::= { xATSSwitchSettings 1 }
xATSSwitchSettingsHighVoltageTransferPoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The highest acceptable voltage condition at source 1.
When any phase of source 1 is greater than this voltage,
source quality is considered bad and the generator run signal
is asserted to begin generator operation.
Specified in volts, line-to-line for a 3-wire service or
line-to-neutral for a 4-wire service.
-1 if not available."
::= { xATSSwitchSettings 2 }
xATSSwitchSettingsMaxFrequencyDeviation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum acceptable frequency deviation condition from nominal at source 1.
When source 1 frequency is outside the specified range,
source quality is considered bad and the generator run signal
is asserted to begin generator operation.
Specified in tenths of Hertz above or below nominal.
A value of zero indicates that frequency is ignored when
determining source quality.
-1 if not available."
::= { xATSSwitchSettings 3 }
xATSSwitchSettingsMinPhaseBalance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum required phase balance at source 1.
When the percentage difference between the minimum and maximum
phase voltage measurements at source 1 is greater than this value,
source quality is considered bad and the generator run signal
is asserted to begin generator operation.
Specified as a percentage. A value of zero indicates that phase balance
is ignored when determining source quality. -1 if not available."
::= { xATSSwitchSettings 4 }
xATSSwitchSettingsNominalRotation OBJECT-TYPE
SYNTAX INTEGER{
abc (1),
cba (2),
any (3),
unknown (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The nominal phase rotation (or phase sequence) required by the load.
For certain types of equipment, such as rotating machinery, phase rotation
is critical for proper operation as it determines the direction which motors
will rotate (clockwise or counterclockwise).
Source quality will be seen as bad if the rotation measured at that
ATS input does not match this setting.
If this setting is set to any, phase rotation is ignored."
::= { xATSSwitchSettings 5 }
xATSSwitchSettingsAllowClosedTransfer OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2),
unknown (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting enables seamless (closed) transfers between sources.
When possible, both source 1 and source 2 are closed to the output
for a brief time. If closed transfer is not possible within the amount
of time specified by the xATSSwitchSettingsMaxSyncTime OID,
an open transfer will be executed."
::= { xATSSwitchSettings 6 }
xATSSwitchSettingsMaxSyncTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When attempting/seeking to perform a closed transfer, this setting defines
the maximum time allowed before the transfer switch will give up and perform
an open transfer. Specified in seconds.
-1 if not available."
::= { xATSSwitchSettings 7 }
xATSSwitchSettingsNeutralTransferTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting defines how long both source 1 and source 2 will be
disconnected from the output, during an open transfer.
Specified in seconds.
-1 if not available."
::= { xATSSwitchSettings 8 }
xATSSwitchSettingsClearLatchedAlarms OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clears any latched alarm conditions."
::= { xATSSwitchSettings 9 }
xATSSwitchSettingsSetToFactoryDefaults OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets all transfer switch settings to factory default values."
::= { xATSSwitchSettings 10 }
-- The xATSSwitchTimers group
xATSSwitchTimersTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of transfer switch timer entries."
::= { xATSSwitchTimers 1 }
xATSSwitchTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSSwitchTimersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of timers supported by ATS.
The number of entries is contained in the xATSSwitchTimersTableSize OID."
::= { xATSSwitchTimers 2 }
xATSSwitchTimersEntry OBJECT-TYPE
SYNTAX XATSSwitchTimersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about an individual ATS timer."
INDEX { xATSSwitchTimersIndex }
::= { xATSSwitchTimersTable 1 }
XATSSwitchTimersEntry ::=
SEQUENCE {
xATSSwitchTimersIndex INTEGER,
xATSSwitchTimersName DisplayString,
xATSSwitchTimersAbort INTEGER,
xATSSwitchTimersStatus INTEGER,
xATSSwitchTimersRemainingTime INTEGER,
xATSSwitchTimersDelaySetting INTEGER
}
xATSSwitchTimersIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of timer entries in the table."
::= { xATSSwitchTimersEntry 1 }
xATSSwitchTimersName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the individual timer.Refer to ATS operation manual,
or on-line help, for detailed descriptions of ATS timers."
::= { xATSSwitchTimersEntry 2 }
xATSSwitchTimersAbort OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This aborts the individual timer."
::= { xATSSwitchTimersEntry 3 }
xATSSwitchTimersStatus OBJECT-TYPE
SYNTAX INTEGER{
inactive (1),
active (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the individual timer. Designates whether this timer
entry is currently running or inactive."
::= { xATSSwitchTimersEntry 4 }
xATSSwitchTimersRemainingTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time remaining for this timer entry.
Specified in seconds."
::= { xATSSwitchTimersEntry 5 }
xATSSwitchTimersDelaySetting OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay settings associated with this timer entry.
When this timer entry is active, the timer value must exceed this setting
before the ATS behavior associated with this timer is executed.
Refer to ATS operation manual, or on-line help, for detailed
descriptions of ATS timers."
::= { xATSSwitchTimersEntry 6 }
-- The xATSSwitchBlockMap group
xATSSwitchBlockMapTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of blocking map entries, or how many ATS actions can be blocked."
::= { xATSSwitchBlockMap 1 }
xATSSwitchBlockMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSSwitchBlockMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of blocking maps supported by the ATS.
The number of entries is contained in the xATSSwitchBlockMapTableSize OID."
::= { xATSSwitchBlockMap 2 }
xATSSwitchBlockMapEntry OBJECT-TYPE
SYNTAX XATSSwitchBlockMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about a specific ATS blocking map."
INDEX { xATSSwitchBlockMapIndex }
::= { xATSSwitchBlockMapTable 1 }
XATSSwitchBlockMapEntry ::=
SEQUENCE {
xATSSwitchBlockMapIndex INTEGER,
xATSSwitchBlockMapName DisplayString,
xATSSwitchBlockMapStatus INTEGER,
xATSSwitchBlockMapSetting INTEGER
}
xATSSwitchBlockMapIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of blocking map entries in the table."
::= { xATSSwitchBlockMapEntry 1 }
xATSSwitchBlockMapName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string describing the ATS action to be blocked."
::= { xATSSwitchBlockMapEntry 2 }
xATSSwitchBlockMapStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Represents the status of this blocking map entry, in bit-mapped format.
A non-zero value indicates that this entry's ATS action is currently being blocked.
The bit(s) set indicate which input(s) are causing the blocking (bit0, bit1, etc).
bit 0 - Contact 1
bit 1 - Contact 2
bit 2 - Contact 3
bit 3 - Contact 4."
::= { xATSSwitchBlockMapEntry 3 }
xATSSwitchBlockMapSetting OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting designates the inputs that block the ATS action
The mapping is specified as a bit-field, where each bit set indicates
the input that blocks the ATS action associated with the entry.
bit 0 - Contact 1
bit 1 - Contact 2
bit 2 - Contact 3
bit 3 - Contact 4."
::= { xATSSwitchBlockMapEntry 4 }
-- The xATSSwitchStatistics group
xATSSwitchStatisticsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of transfer switch statistics entries."
::= { xATSSwitchStatistics 1 }
xATSSwitchStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSSwitchStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of statistics supported by ATS.
The number of entries is contained in the xATSSwitchStatisticsTableSize OID."
::= { xATSSwitchStatistics 2 }
xATSSwitchStatisticsEntry OBJECT-TYPE
SYNTAX XATSSwitchStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about an individual ATS statistic."
INDEX { xATSSwitchStatisticsIndex }
::= { xATSSwitchStatisticsTable 1 }
XATSSwitchStatisticsEntry ::=
SEQUENCE {
xATSSwitchStatisticsIndex INTEGER,
xATSSwitchStatisticsName DisplayString,
xATSSwitchStatisticsValue DisplayString,
xATSSwitchStatisticsReset INTEGER
}
xATSSwitchStatisticsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of ATS statistics entries in the table."
::= { xATSSwitchStatisticsEntry 1 }
xATSSwitchStatisticsName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the name of the ATS statistic associated with this entry."
::= { xATSSwitchStatisticsEntry 2 }
xATSSwitchStatisticsValue OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the value of the ATS statistic associated with this entry."
::= { xATSSwitchStatisticsEntry 3 }
xATSSwitchStatisticsReset OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This will reset the individual ATS statistic associated with this entry."
::= { xATSSwitchStatisticsEntry 4 }
-- The xATS Source 1 group
xATSSource1Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"String used to identify source 1."
::= { xATSSource1 1 }
xATSSource1Position OBJECT-TYPE
SYNTAX INTEGER{
open (1),
closed (2),
tripped (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current position of the switch at source 1."
::= { xATSSource1 2 }
xATSSource1Frequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency at source 1 in tenths of Hertz.
-1 if unavailable."
::= { xATSSource1 3 }
xATSSource1Quality OBJECT-TYPE
SYNTAX INTEGER{
sourceGood (1),
lowVoltage (2),
highVoltage (3),
phaseImbalance (4),
freqOutOfRange (5),
badRotation (6),
unknown (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current line quality of source 1."
::= { xATSSource1 4 }
xATSSource1Rotation OBJECT-TYPE
SYNTAX INTEGER{
abc (1),
cba (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase rotation measured at the source 1 input of the ATS.
The sequence is a reference to the order in which the three phases
pass the zero-crossing boundary in time."
::= { xATSSource1 5 }
xATSSource1TableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input voltage entries at the source 1 input of the ATS."
::= { xATSSource1 6 }
xATSSource1PhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSSource1PhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of voltage table entries for source 1. The number of
entries are the phase entries. The number of entries is contained in the
xATSSource1TableSize OID."
::= { xATSSource1 7 }
xATSSource1PhaseEntry OBJECT-TYPE
SYNTAX XATSSource1PhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input voltage phase at the source 1 input of the ATS."
INDEX { xATSSource1Index }
::= { xATSSource1PhaseTable 1 }
XATSSource1PhaseEntry ::= SEQUENCE {
xATSSource1Index INTEGER,
xATSSource1VoltageLtoL INTEGER,
xATSSource1VoltageLtoN INTEGER
}
xATSSource1Index OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each phase utilized at source 1."
::= { xATSSource1PhaseEntry 1 }
xATSSource1VoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Source 1 line-to-line input voltage.
Measured in tenths of Volts."
::= { xATSSource1PhaseEntry 2 }
xATSSource1VoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Source 1 line-to-neutral input voltage.
Measured in tenths of Volts. -1 for a 3-wire service type."
::= { xATSSource1PhaseEntry 3 }
-- The xATS Source 2 group
xATSSource2Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"String used to identify source 2."
::= { xATSSource2 1 }
xATSSource2Position OBJECT-TYPE
SYNTAX INTEGER{
open (1),
closed (2),
tripped (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current position of the switch at source 2."
::= { xATSSource2 2 }
xATSSource2Frequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency at source 2 in tenths of Hertz.
-1 if not available."
::= { xATSSource2 3 }
xATSSource2Quality OBJECT-TYPE
SYNTAX INTEGER{
sourceGood (1),
lowVoltage (2),
highVoltage (3),
phaseImbalance (4),
freqOutOfRange (5),
badRotation (6),
unknown (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current line quality of source 2."
::= { xATSSource2 4 }
xATSSource2Rotation OBJECT-TYPE
SYNTAX INTEGER{
abc (1),
cba (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase rotation measured at the source 2 input of the ATS.
-1 if not available."
::= { xATSSource2 5 }
xATSSource2TableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input voltage entries at the source 2 input of the ATS."
::= { xATSSource2 6 }
xATSSource2PhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSSource2PhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of voltage table entries for the source 2. The number of
entries are the phase entries. The number of entries is contained in the
xATSSource2TableSize OID."
::= { xATSSource2 7 }
xATSSource2PhaseEntry OBJECT-TYPE
SYNTAX XATSSource2PhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input voltage phase at the source 2 input of the ATS."
INDEX { xATSSource2Index }
::= { xATSSource2PhaseTable 1 }
XATSSource2PhaseEntry ::= SEQUENCE {
xATSSource2Index INTEGER,
xATSSource2VoltageLtoL INTEGER,
xATSSource2VoltageLtoN INTEGER
}
xATSSource2Index OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each phase utilized at the source 2."
::= { xATSSource2PhaseEntry 1 }
xATSSource2VoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Source 2 line-to-line input voltage.
Measured in tenths of Volts."
::= { xATSSource2PhaseEntry 2 }
xATSSource2VoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Source 2 line-to-neutral input voltage.
Measured in tenths of Volts. -1 for a 3-wire service type."
::= { xATSSource2PhaseEntry 3 }
-- The xATSSystemOutput
xATSSystemOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system output frequency in tenths of Hertz."
::= { xATSSystemOutput 1 }
xATSSystemOutputTotalPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total system output power in tenths of kW."
::= { xATSSystemOutput 2 }
xATSSystemOutputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the total system output power in tenths of kVA."
::= { xATSSystemOutput 3 }
xATSSystemOutputTotalPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total power factor of the system output.
A value of 100 representing a unity power factor (1.00)
Specified in hundredths."
::= { xATSSystemOutput 4 }
xATSSystemOutputFrequencyTolerance OBJECT-TYPE
SYNTAX INTEGER{
freqToleranceOff (1),
freqTolerancePointTwo (2),
freqTolerancePointFive (3),
freqToleranceOne (4),
freqToleranceOnePointFive (5),
freqToleranceTwo (6),
freqToleranceThree (7),
freqToleranceFour (8),
freqToleranceFive (9),
freqToleranceNine (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the panel output frequency tolerance in +/- Hertz."
::= { xATSSystemOutput 5 }
xATSSystemOutputOverVoltThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an output over voltage condition will be generated.
Specified as tenths of percent deviation from nominal.
A value of zero indicates that the threshold is disabled."
::= { xATSSystemOutput 6 }
xATSSystemOutputUnderVoltThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an output under voltage condition will be generated.
Specified as tenths of percent deviation from nominal.
A value of zero indicates that the threshold is disabled."
::= { xATSSystemOutput 7 }
xATSSystemOutputOverCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which an over current condition will be generated.
Specified as a percent of the transfer switch rating (xATSDeviceTransferSwitchRating OID).
A value of zero indicates that the threshold is disabled."
::= { xATSSystemOutput 8 }
xATSSystemOutputUnderCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which an under current condition will be generated.
Specified as a percent of the transfer switch rating (xATSDeviceTransferSwitchRating OID).
A value of zero indicates that the threshold is disabled."
::= { xATSSystemOutput 9 }
xATSSystemOutputAlarmDelayThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay the generation of an output alarm.
Specified in seconds."
::= { xATSSystemOutput 10 }
xATSSystemOutputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of system output phase entries."
::= { xATSSystemOutput 11 }
xATSSystemOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSSystemOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of system output table entries.
The number of entries is contained in the xATSSystemOutputTableSize OID."
::= { xATSSystemOutput 12 }
xATSSystemOutputPhaseEntry OBJECT-TYPE
SYNTAX XATSSystemOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular system output phase."
INDEX { xATSSystemOutputPhaseIndex }
::= { xATSSystemOutputPhaseTable 1 }
XATSSystemOutputPhaseEntry ::= SEQUENCE {
xATSSystemOutputPhaseIndex INTEGER,
xATSSystemOutputVoltageLtoL INTEGER,
xATSSystemOutputVoltageLtoN INTEGER,
xATSSystemOutputPhaseCurrent INTEGER,
xATSSystemOutputPower INTEGER,
xATSSystemOutputApparentPower INTEGER,
xATSSystemOutputPowerFactor INTEGER
}
xATSSystemOutputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each system output phase utilized in this device."
::= { xATSSystemOutputPhaseEntry 1 }
xATSSystemOutputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line system output voltage available at the circuit panel.
Measured in tenths of Volts. -1 if not available."
::= { xATSSystemOutputPhaseEntry 2 }
xATSSystemOutputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral system output voltage available at the circuit panel.
Measured in tenths of Volts. -1 for a 3-wire service type or if not available."
::= { xATSSystemOutputPhaseEntry 3 }
xATSSystemOutputPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System load current per phase. Measured in Amps.
-1 if not available."
::= { xATSSystemOutputPhaseEntry 4 }
xATSSystemOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System output power per phase. Measured in tenths of kW."
::= { xATSSystemOutputPhaseEntry 5 }
xATSSystemOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"system output power per phase. Measured in tenths of kVA."
::= { xATSSystemOutputPhaseEntry 6 }
xATSSystemOutputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicates the power factor of the system output per phase.
A value of 100 representing a unity power factor (1.00).
Measured in hundredths."
::= { xATSSystemOutputPhaseEntry 7 }
-- xATS TestingStatus group
xATSTestingStatusSelectTestProcess OBJECT-TYPE
SYNTAX INTEGER {
engineStartTest (1),
systemLoadTest (2),
generatorHoldTest (3),
cancelTest (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of tests that can be selected when no test has been scheduled.
engineStartTest and systemLoadTest may be selected when no tests
are running. Tests that are selected may be canceled manually."
::= { xATSTestingStatus 1 }
xATSTestingStatusTestStatus OBJECT-TYPE
SYNTAX INTEGER {
noTestInProcess (1),
testPending (2),
startingEngine (3),
engineWarmingUp (4),
awaitingTransferToS2 (5),
testingWithLoad (6),
awaitingRetransferToS1 (7),
testingWithoutLoad (8),
stoppingEngine (9),
holdingOnGenerator (10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present system test status/state."
::= { xATSTestingStatus 2 }
xATSTestingStatusProfileWarmupTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that the generator will warm up during a test.
This is portion of the test when the xATSTestingStatusTestStatus
OID returns the value engineWarmingUp.
Specified in seconds."
::= { xATSTestingStatus 3 }
xATSTestingStatusProfileLoadedTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that ATS will apply the system load to the generator
during a system load test.
This is portion of the test when the xATSTestingStatusTestStatus
OID returns the value testingWithLoad.
Specified in minutes."
::= { xATSTestingStatus 4 }
xATSTestingStatusProfileUnloadedTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that the generator will run following the warm up
portion of a start test, or the loaded portion of a load test.
This is portion of the test when the xATSTestingStatusTestStatus
OID returns the value testingWithoutLoad.
Specified in seconds."
::= { xATSTestingStatus 5 }
-- xATS TestingResults group
xATSTestingResultsLastDateOfTest OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date of the last test that was performed, either scheduled or manual.
Test results are available in the xATSTestingResultsLastResult OID.
Specified in the dd/mm/yyyy format, or 'none' if not available."
::= { xATSTestingResults 1 }
xATSTestingResultsLastResult OBJECT-TYPE
SYNTAX INTEGER {
noResultsAvailable (1),
startTestPassed (2),
loadTestPassed (3),
startSignalFailure (4),
failedGenNotInAuto (5),
failedGenEmerStop (6),
failedGenShutdown (7),
failedGenDidNotStart (8),
failedS2NeverGood (9),
genFailedDuringWarmup (10),
failureOnXferToS1 (11),
genFailedLoaded (12),
failureOnRexferToS2 (13),
failedOnCooldown (14),
genFailedToStop (15),
failedAtsInternalFault (16),
failedAtsNotInAuto (17),
canceledManualTest (18),
canceledScheduledTest (19)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The result of the last ATS/generator system test."
::= { xATSTestingResults 2 }
xATSTestingResultsTestLastTestTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time of day at which the last test was performed, either scheduled or manual.
Test results are available in the xATSTestingResultsLastResult OID.
Specified in the hh:mm:ss format, or 'none' if not available."
::= { xATSTestingResults 3 }
xATSTestingResultsLastCrankDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time spent cranking the generator before it started during the last test.
Specified in seconds, or -1 if not available."
::= { xATSTestingResults 4 }
xATSTestingResultsLastWarmupDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time spent in the engineWarmingUp state during the last system test.
Specified in seconds, or -1 if not available."
::= { xATSTestingResults 5 }
xATSTestingResultsLastLoadedDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time spent in the testingWithLoad state during the last system test.
Specified in seconds, or -1 if not available."
::= { xATSTestingResults 6 }
xATSTestingResultsLastUnloadedDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time spent in the testingWithoutLoad state during the last system test.
Specified in seconds, or -1 if not available."
::= { xATSTestingResults 7 }
-- xATS TestingSchedule group
xATSTestingScheduleFrequency OBJECT-TYPE
SYNTAX INTEGER {
never (1),
daily (2),
weekly (3),
monthly (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The frequency of running scheduled tests."
::= { xATSTestingSchedule 1 }
xATSTestingScheduleTestDay OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired day for the scheduled test. This object applies only
when the xATSTestingScheduleFrequency OID is set to weekly or monthly.
For weekly test frequency, the string is the day the test will be run.
For monthly test frequency, the string indicates the day,
and the instance within the month.
For example, for monthly frequency: 2nd Sunday, 3rd Monday, 4th Tuesday,
for weekly frequency: Sunday, Monday, Tuesday."
::= { xATSTestingSchedule 2 }
xATSTestingScheduleTestTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time of day that the scheduled test will occur.
Specified in the format hh:mm."
::= { xATSTestingSchedule 3 }
xATSTestingScheduleTestWithLoadInterval OBJECT-TYPE
SYNTAX INTEGER {
applyLoadEveryTest (1),
neverApplyLoad (2),
applyLoadMonthly (3),
applyLoadMonthlyDetailed (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting specifies which system tests should include applying the
load to the generator. The applyLoadMonthlyDetailed entry
in the list will apply load once, for each month represented in the
xATSTestingScheduleTestWithLoadSelectMonth OID."
::= { xATSTestingSchedule 4 }
xATSTestingScheduleTestWithLoadSelectMonth OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The detailed selection for testing with load on a month-by-month basis.
This object is applicable when the xATSTestingScheduleTestWithLoadInterval
is set to applyLoadMonthlyDetailed. Otherwise this selection will be ignored.
Format for this string is a comma-separated entry of months.
For example: Jan,Mar,Dec.
The string will return 'No Months Scheduled' if no months have been selected."
::= { xATSTestingSchedule 5 }
xATSTestingScheduleNextTestDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the next scheduled test, in the format dd-mmm-yyyy."
::= { xATSTestingSchedule 6 }
-- xATSTestingSimulatePowerFail group
xATSTestingSimulatePowerFailTest OBJECT-TYPE
SYNTAX INTEGER{
cancelSimulation (1),
fiveSecondsSimulation (2),
tenSecondsSimulation (3),
thirtySecondsSimulation (4),
oneMinuteSimulation (5),
threeMinutesSimulation (6),
fiveMinutesSimulation (7),
tenMinutesSimulation (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object executes a simulated power failure for the duration indicated.
Simulation can be aborted by selecting cancelSimulation."
::= { xATSTestingSimulatePowerFail 1 }
xATSTestingSimulatePowerFailTimeRemaining OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time remaining in seconds, for a simulated power failure.
a value of zero indicates that simulated power failure is not active."
::= { xATSTestingSimulatePowerFail 2 }
-- The xATS Input Contact group
xATSInputContactNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts supported by the ATS."
::= { xATSInputContacts 1 }
xATSInputContactTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input contact entries."
::= { xATSInputContacts 2 }
xATSInputContactTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSInputContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the ATS.
The number of entries is contained in the
xATSInputContactTableSize OID."
::= { xATSInputContacts 3 }
xATSInputContactEntry OBJECT-TYPE
SYNTAX XATSInputContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A contact entry containing information for a given contact."
INDEX { xATSInputContactNumber }
::= { xATSInputContactTable 1 }
XATSInputContactEntry ::=
SEQUENCE {
xATSInputContactNumber INTEGER,
xATSInputContactName DisplayString,
xATSInputContactNormalState INTEGER,
xATSInputContactCurrentState INTEGER
}
xATSInputContactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index identifying the contact on the ATS."
::= { xATSInputContactEntry 1 }
xATSInputContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the purpose/use of the contact."
::= { xATSInputContactEntry 2 }
xATSInputContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal operating position of the contact."
::= { xATSInputContactEntry 3 }
xATSInputContactCurrentState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the contact."
::= { xATSInputContactEntry 4 }
-- the xATS OutputRelays group
xATSOutputRelayNumRelays OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output relays supported by the ATS."
::= { xATSOutputRelays 1 }
xATSOutputRelayTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output relay entries."
::= { xATSOutputRelays 2 }
xATSOutputRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSOutputRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output relays supported by the ATS.
The number of entries is contained in the
xATSOutputRelayTableSize OID."
::= { xATSOutputRelays 3 }
xATSOutputRelayEntry OBJECT-TYPE
SYNTAX XATSOutputRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A output relay entry containing information for a given contact."
INDEX { xATSOutputRelayNumber }
::= { xATSOutputRelayTable 1 }
XATSOutputRelayEntry ::=
SEQUENCE {
xATSOutputRelayNumber INTEGER,
xATSOutputRelayName DisplayString,
xATSOutputRelayNormalState INTEGER,
xATSOutputRelayCurrentState INTEGER
}
xATSOutputRelayNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index identifying the output relay on the ATS."
::= { xATSOutputRelayEntry 1 }
xATSOutputRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the purpose/use of the output relay."
::= { xATSOutputRelayEntry 2 }
xATSOutputRelayNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal operating position of the output relay."
::= { xATSOutputRelayEntry 3 }
xATSOutputRelayCurrentState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the output relay."
::= { xATSOutputRelayEntry 4 }
-- The xATS Generator Ident group
xATSGeneratorIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of the generator.
This value is set at the factory."
::= { xATSGeneratorIdent 1 }
xATSGeneratorIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the generator.
This value is set at the factory."
::= { xATSGeneratorIdent 2 }
xATSGeneratorIdentDateofManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying when the generator was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { xATSGeneratorIdent 3 }
xATSGeneratorIdentVoltageConfiguration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage for which the generator's alternator is designed.
Specified in Volts line-to-line."
::= { xATSGeneratorIdent 4 }
xATSGeneratorIdentMaxPowerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The max power rating of the generator. Specified in kW."
::= { xATSGeneratorIdent 5 }
xATSGeneratorIdentAlternatorFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency for which the generator's alternator is designed.
Specified in Hertz."
::= { xATSGeneratorIdent 6 }
-- The xATS Generator Status group
xATSGeneratorStatusGeneratorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name or label for the generator connected to the source 2 of the ATS."
::= { xATSGeneratorStatus 1 }
xATSGeneratorStatusOperational OBJECT-TYPE
SYNTAX INTEGER{
nocomm (1),
off (2),
ready (3),
starting (4),
idle (5),
running (6),
normalStop (7),
emergencyStop (8),
notInAuto (9),
shutdown (10),
unknown (11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational status of the generator. unavailable when unrecognized status is received."
::= { xATSGeneratorStatus 2 }
xATSGeneratorStatusModeSwitchPosition OBJECT-TYPE
SYNTAX INTEGER{
off (1),
manual (2),
automatic (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the generator's auto-mode switch.
In automatic mode, the generator is started and stopped via the
remote start contact, which has state indicated in the
xATSGeneratorStatusRemoteStart OID.
In manual mode generator start/stop control is via local command only.
Off prevents the generator from running."
::= { xATSGeneratorStatus 3 }
xATSGeneratorStatusRemoteStart OBJECT-TYPE
SYNTAX INTEGER{
stop (1),
run (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the generator's remote start contact, which is
provided as an output from the transfer switch to start/stop the
generator when in automatic mode."
::= { xATSGeneratorStatus 4 }
-- The xATS Generator Advanced Status group
xATSGeneratorAdvStatusBatteryVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage of the generator's starting battery.
Measured in tenths of VDC, or -1 if not available."
::= { xATSGeneratorAdvStatus 1 }
xATSGeneratorAdvStatusOilPressure OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The generator's engine oil pressure.
Measured in tenths of Psi or kPa, based on the
value of the xATSGeneratorSettingsMetricUnit OID,
or -1 if not available."
::= { xATSGeneratorAdvStatus 2 }
xATSGeneratorAdvStatusCoolantTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current coolant temperature in the generator.
Measured in degrees Celsius or Fahrenheit, based on the
value of the xATSGeneratorSettingsMetricUnit OID,
or -1 if not available."
::= { xATSGeneratorAdvStatus 3 }
xATSGeneratorAdvStatusEngineRPM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current engine speed of the generator.
Measured in RPM, or -1 if not available."
::= { xATSGeneratorAdvStatus 4 }
xATSGeneratorAdvStatusOilLevel OBJECT-TYPE
SYNTAX INTEGER{
ok (1),
low (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates adequate oil level in the generator."
::= { xATSGeneratorAdvStatus 5 }
xATSGeneratorAdvStatusCoolantLevel OBJECT-TYPE
SYNTAX INTEGER{
ok (1),
low (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates adequate coolant level in the generator."
::= { xATSGeneratorAdvStatus 6 }
-- The xATS Generator Output group
xATSGeneratorOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output frequency of the generator.
Measured in tenths of Hertz, or -1 if not available."
::= { xATSGeneratorOutput 1 }
xATSGeneratorOutputTotalPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total output power of the generator.
Measured in tenths of tenths of kW, or -1 if not available."
::= { xATSGeneratorOutput 2 }
xATSGeneratorOutputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total output power of the generator.
Measured in tenths of kVA, or -1 if not available."
::= { xATSGeneratorOutput 3 }
xATSGeneratorOutputTotalPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total load power factor of the generator.
A value of 100 representing a unity power factor (1.00),
or -1 when if not available."
::= { xATSGeneratorOutput 4 }
xATSGeneratorOutputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of generator output phase entries."
::= { xATSGeneratorOutput 5 }
xATSGeneratorOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XATSGeneratorOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of generator output table entries.
The number of entries is contained in the xATSGeneratorOutputTableSize OID."
::= { xATSGeneratorOutput 6 }
xATSGeneratorOutputPhaseEntry OBJECT-TYPE
SYNTAX XATSGeneratorOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular generator output phase."
INDEX { xATSGeneratorOutputPhaseIndex }
::= { xATSGeneratorOutputPhaseTable 1 }
XATSGeneratorOutputPhaseEntry ::= SEQUENCE {
xATSGeneratorOutputPhaseIndex INTEGER,
xATSGeneratorOutputVoltageLtoL INTEGER,
xATSGeneratorOutputVoltageLtoN INTEGER,
xATSGeneratorOutputPhaseCurrent INTEGER,
xATSGeneratorOutputPower INTEGER,
xATSGeneratorOutputApparentPower INTEGER,
xATSGeneratorOutputPowerFactor INTEGER
}
xATSGeneratorOutputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each generator output phase utilized in this device."
::= { xATSGeneratorOutputPhaseEntry 1 }
xATSGeneratorOutputVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line generator output voltage.
Measured in Volts, or -1 if not available."
::= { xATSGeneratorOutputPhaseEntry 2 }
xATSGeneratorOutputVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral generator output voltage.
Measured in volts, or -1 if not available."
::= { xATSGeneratorOutputPhaseEntry 3 }
xATSGeneratorOutputPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Generator load current per phase.
Measured in Amps, or -1 if not available."
::= { xATSGeneratorOutputPhaseEntry 4 }
xATSGeneratorOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Generator output power per phase.
Measured in tenths of kW, or -1 if not available."
::= { xATSGeneratorOutputPhaseEntry 5 }
xATSGeneratorOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Generator output power per phase.
Measured in tenths of kVA, or -1 if not available."
::= { xATSGeneratorOutputPhaseEntry 6 }
xATSGeneratorOutputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the load power factor of the generator output per phase.
A value of 100 representing a unity power factor (1.00),
or -1 if not available."
::= { xATSGeneratorOutputPhaseEntry 7 }
-- xATS Generator Settings group
xATSGeneratorSettingsVoltageAdjust OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage adjust of the generator.
Specified in volts line-to-line,
or -1 if not available."
::= { xATSGeneratorSettings 1 }
xATSGeneratorSettingsFrequencyAdjust OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency adjust of the generator.
Specified in tenths of Hertz."
::= { xATSGeneratorSettings 2 }
xATSGeneratorSettingsStartDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The delay, in seconds, after the remote run signal is activated
before the generator's engine will be cranked to start,
or -1 if not available."
::= { xATSGeneratorSettings 3 }
xATSGeneratorSettingsStopDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The delay, in seconds, before the generator will stop
after the remote run signal is deactivated,
or -1 if not available."
::= { xATSGeneratorSettings 4 }
xATSGeneratorSettingsCrankCycleEnable OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
enabled (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When Crank Cycle is enabled, the engine will be cranked up to the time
specified by the xATSGeneratorSettingsCrankTime OID.
If the generator's engine does not start, there will be a pause as
specified by the xATSGeneratorSettingsCrankRestTime OID before the
engine will be cranked again. This cycle is repeated as specified by
the xATSGeneratorSettingsNumberCrank OID.
When crank cycle is disabled, the generator's engine will be
cranked continuously until it starts."
::= { xATSGeneratorSettings 5 }
xATSGeneratorSettingsCrankTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The duration of engine cranking, in seconds, when starting the generator.
Applicable when the xATSGeneratorSettingsCrankCycleEnable OID is enabled.
-1 if not available."
::= { xATSGeneratorSettings 6 }
xATSGeneratorSettingsCrankRestTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The pause duration, in seconds, following an unsuccessful attempt to start the generator.
Applicable when the xATSGeneratorSettingsCrankCycleEnable OID is enabled.
-1 if not available."
::= { xATSGeneratorSettings 7 }
xATSGeneratorSettingsNumberCrank OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of failed crank attempts before giving up on starting the generator.
Applicable when the xATSGeneratorSettingsCrankCycleEnable OID is enabled.
-1 if not available."
::= { xATSGeneratorSettings 8 }
xATSGeneratorSettingsMetricUnit OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the use of metric units in generator related OIDs, as well
as on all other interfaces including the generator's local interface."
::= { xATSGeneratorSettings 9 }
-- xATS generator service group
xATSGeneratorServiceTotalRunHoursLifetime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time that the generator engine has been run,
over the life of the generator. Measured in hours.
-1 if not available."
::= { xATSGeneratorService 1 }
xATSGeneratorServiceEngineStartsLifetime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of engine starts over the life of the generator.
-1 if not available."
::= { xATSGeneratorService 2 }
xATSGeneratorServiceTotalkWhLifetime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total kWh of operation over the life of the generator.
-1 if not available."
::= { xATSGeneratorService 3 }
xATSGeneratorServiceTotalRunHoursSinceMaintenance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time that the generator engine has been run,
since last service maintenance. Measured in tenths of hours.
-1 if not available."
::= { xATSGeneratorService 4 }
xATSGeneratorServiceEngineStartsSinceMaintenance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of engine starts since last service maintenance.
-1 if not available."
::= { xATSGeneratorService 5 }
xATSGeneratorServiceTotalkWhMaintenance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total kWh of operation since last service maintenance.
-1 if not available."
::= { xATSGeneratorService 6 }
xATSGeneratorServiceResetRecord OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the engine start counter, engine run-hours, and kWh values that have
accumulated in the generator since last maintenance.
Also, the last service date will be reset to the current system date, and
any service alarms will be cleared."
::= { xATSGeneratorService 7 }
xATSGeneratorServiceRecordResetDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date at which the generator's service record was reset, in dd-mmm-yyyy format."
::= { xATSGeneratorService 8 }
xATSGeneratorServiceNextServiceDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date at which the next generator service is due in dd-mmm-yyyy format.
Based on the xATSGeneratorServiceCalendarIntervalThreshold OID
or '' if the calendar-based threshold is set to off."
::= { xATSGeneratorService 9 }
xATSGeneratorServiceRunHoursUntilServiceDate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Run hours until the next generator service is due, in hours.
Based on the xATSGeneratorServiceRunHoursThreshold OID
or -1 if the run hour-based threshold is set to off."
::= { xATSGeneratorService 10 }
xATSGeneratorServiceRunHoursThreshold OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
runThreshold100Hours (2),
runThreshold150Hours (3),
runThreshold200Hours (4),
runThreshold250Hours (5),
runThreshold300Hours (6),
runThreshold400Hours (7),
runThreshold500Hours (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Run hour-based service interval. When the run-hours since
service surpasses this threshold, generator service is due."
::= { xATSGeneratorService 11 }
xATSGeneratorServiceCalendarIntervalThreshold OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
interval1month (2),
interval2month (3),
interval3month (4),
interval6month (5),
intervalyearly (6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Calendar-based service interval. When the next service date,
as indicated by the xATSGeneratorServiceNextServiceDate OID
is in the past, generator is due for service."
::= { xATSGeneratorService 12 }
-- The xATS Generator Fuel system group
xATSGeneratorFuelSystemType OBJECT-TYPE
SYNTAX INTEGER{
diesel (1),
propane (2),
naturalGas (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of fuel used by the generator."
::= { xATSGeneratorFuelSystem 1 }
xATSGeneratorFuelSystemTankSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Size of the generator's fuel tank.
Specified in gallons or liters, based on the value of the
xATSGeneratorSettingsMetricUnit OID, or -1 if not available."
::= { xATSGeneratorFuelSystem 2 }
xATSGeneratorFuelSystemFuelLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fuel remaining in the generator tank.
Measured in percent of tank fill, or -1 if not available."
::= { xATSGeneratorFuelSystem 3 }
xATSGeneratorFuelSystemRuntimePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power value used in the runtime remaining calculation.
Measured in tenths of kW, or -1 if not available."
::= { xATSGeneratorFuelSystem 4 }
xATSGeneratorFuelSystemEstimatedRunTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of available runtime for the generator, based on
available fuel as specified in the xATSGeneratorFuelSystemFuelLevel OID
and kW load as specified in the xATSGeneratorFuelSystemRuntimePower OID.
Measured in tenths of hours, or -1 if not available."
::= { xATSGeneratorFuelSystem 5 }
xATSGeneratorFuelSystemLowRunTimeThreshold OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
oneHour (2),
twoHours (3),
threeHours (4),
fourHours (5),
fiveHours (6),
sixHours (7),
twelveHours (8),
oneDay (9),
twoDays (10),
threeDays (11),
fourDays (12),
fiveDays (13),
sixDays (14),
sevenDays (15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a low runtime alarm will exist."
::= { xATSGeneratorFuelSystem 6 }
xATSGeneratorFuelSystemVeryLowRunTimeThreshold OBJECT-TYPE
SYNTAX INTEGER{
disabled (1),
oneHour (2),
twoHours (3),
threeHours (4),
fourHours (5),
fiveHours (6),
sixHours (7),
twelveHours (8),
oneDay (9),
twoDays (10),
threeDays (11),
fourDays (12),
fiveDays (13),
sixDays (14),
sevenDays (15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a very low runtime alarm will exist."
::= { xATSGeneratorFuelSystem 7 }
xATSGeneratorFuelSystemLowFuelLevelThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a low fuel alarm will exist, with a value of 0 indicating disabled.
Specified as percent of tank fill."
::= { xATSGeneratorFuelSystem 8 }
xATSGeneratorFuelSystemVeryLowFuelLevelThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold below which a very low fuel alarm will exist, with a value of 0 indicating disabled.
Specified as percent of tank fill."
::= { xATSGeneratorFuelSystem 9 }
-- The console Port Server AP930x system group
apCPSpname OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The product's name."
::= { cpsAP930xSys 1 }
apCPSversion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The firmware's version."
::= {cpsAP930xSys 2}
apCPSPower OBJECT IDENTIFIER ::= { cpsAP930xSys 3 }
apCPSPwNum OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of the power supplies."
::= { apCPSPower 1 }
apCPSPw1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the first power supply.
0 will indicate not installed,
1 will indicate power ON,
2 will indicate power OFF."
::= { apCPSPower 2 }
apCPSPw2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the second power supply.
0 will indicate not installed,
1 will indicate power ON,
2 will indicate power OFF."
::= { apCPSPower 3 }
apCPSPcmcia OBJECT IDENTIFIER ::= {cpsAP930xSys 4}
apCPSNPcmcia OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number of PCMCIA cards available."
::= { apCPSPcmcia 1 }
cpsCardIdentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpsCardIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table of PCMCIA card identifications."
::= { apCPSPcmcia 2 }
cpsCardIdentEntry OBJECT-TYPE
SYNTAX CpsCardIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Identification information for a PCMCIA card."
INDEX { cpsCardIdentIndex }
::= { cpsCardIdentTable 1 }
CpsCardIdentEntry ::= SEQUENCE {
cpsCardIdentIndex Integer32,
cpsCardIdentProd DisplayString,
cpsCardIdentMan DisplayString ,
cpsCardIdentFunc DisplayString,
cpsCardIdentPCI DisplayString
}
cpsCardIdentIndex OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number to identify the socket Card."
::= { cpsCardIdentEntry 1 }
cpsCardIdentProd OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Product identification string."
::= { cpsCardIdentEntry 2 }
cpsCardIdentMan OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Manufacturer ID code."
::= { cpsCardIdentEntry 3 }
cpsCardIdentFunc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Function ID code."
::= { cpsCardIdentEntry 4 }
cpsCardIdentPCI OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "PCI ID"
::= { cpsCardIdentEntry 5 }
cpsCardConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpsCardConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table of socket configuration information."
::= { apCPSPcmcia 3 }
cpsCardConfEntry OBJECT-TYPE
SYNTAX CpsCardConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Configuration information for a socket."
INDEX { cpsCardConfIndex }
::= { cpsCardConfTable 1 }
CpsCardConfEntry ::= SEQUENCE {
cpsCardConfIndex Integer32,
cpsCardConfPower DisplayString,
cpsCardConfType DisplayString,
cpsCardConfInter DisplayString,
cpsCardConfFunc DisplayString,
cpsCardConfCardv DisplayString,
cpsCardConfPort1 DisplayString,
cpsCardConfPort2 DisplayString
}
cpsCardConfIndex OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number to identify the socket PCMCIA."
::= { cpsCardConfEntry 1 }
cpsCardConfPower OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Power Settings."
::= { cpsCardConfEntry 2 }
cpsCardConfType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Interface Type."
::= { cpsCardConfEntry 3 }
cpsCardConfInter OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Interrupt number."
::= { cpsCardConfEntry 4 }
cpsCardConfFunc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Function."
::= { cpsCardConfEntry 5 }
cpsCardConfCardv OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Card values."
::= { cpsCardConfEntry 6 }
cpsCardConfPort1 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "I/O Port 1."
::= { cpsCardConfEntry 7 }
cpsCardConfPort2 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "I/O Port 2."
::= { cpsCardConfEntry 8 }
cpsCardStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpsCardStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table of current socket status information."
::= { apCPSPcmcia 4 }
cpsCardStatusEntry OBJECT-TYPE
SYNTAX CpsCardStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Current status information for a socket."
INDEX { cpsCardStatusIndex }
::= { cpsCardStatusTable 1 }
CpsCardStatusEntry ::= SEQUENCE {
cpsCardStatusIndex Integer32,
cpsCardStatusCard DisplayString,
cpsCardStatusFunc DisplayString
}
cpsCardStatusIndex OBJECT-TYPE
SYNTAX Integer32(0..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number to identify the socket PCMCIA."
::= { cpsCardStatusEntry 1 }
cpsCardStatusCard OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Current Card State."
::= { cpsCardStatusEntry 2 }
cpsCardStatusFunc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Current Function."
::= { cpsCardStatusEntry 3 }
apCPSFlashSize OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "Total amount of flash memory in Mbytes."
::= {cpsAP930xSys 5}
apCPSRAMSize OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "Total amount of RAM in Mbytes."
::= {cpsAP930xSys 6}
apCPSCPUfreq OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "CPU clock in MHz."
::= {cpsAP930xSys 7}
apCPSDevId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The product's identifier."
::= { cpsAP930xSys 8 }
-- The console Port Server AP930x configuration group
cpsHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The Host Name."
::= { cpsAP930xConf 1 }
cpsConsoleBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The console banner."
::= { cpsAP930xConf 2 }
cpsMotd OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The motd message."
::= { cpsAP930xConf 3 }
cpsEthItf OBJECT IDENTIFIER ::= { cpsAP930xConf 4 }
cpsEthDhcpc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "0 will indicate DHCP inactive,
1 will indicate DHCP active,
2 will indicate DHCP active and the last parameter is saved."
::= { cpsEthItf 1 }
cpsEthIPaddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "This is the IP address of the Ethernet Interface."
::= { cpsEthItf 2 }
cpsEthIPmask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "The mask for the Ethernet network."
::= { cpsEthItf 3 }
cpsEthMTU OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "The Maximum Transmission Unit size, which determines
whether packets should be broken up."
::= { cpsEthItf 4 }
cpsEthIPaddr2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "The Ethernet secondary IP address."
::= { cpsEthItf 5 }
cpsEthIPmask2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "The Ethernet secondary IP mask."
::= { cpsEthItf 6 }
cpsNameService OBJECT IDENTIFIER ::= { cpsAP930xConf 5 }
cpsResolverOrder OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Specifies how host lookups are to be performed.
Valid values : empty, 'hosts', 'bind', 'hosts, bind',
'bind, hosts' "
::= { cpsNameService 1 }
cpsMultipleIP OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Valid values are ON or OFF. If set to ON, the resolve
library will return all valid addresses for a host
that appears in the /etc/hosts file, instead of only
the first. "
::= { cpsNameService 2 }
cpsDNSserv OBJECT IDENTIFIER ::= { cpsNameService 3 }
cpsDNSpriserv OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "Internet Address (in dot notation) of primary name
server that the resolver should query."
::= { cpsDNSserv 1 }
cpsDNSsecserv OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "Internet Address (in dot notation) of secondary name
server that the resolver should query."
::= { cpsDNSserv 2 }
cpsDNSdomain OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Local domain name."
::= { cpsDNSserv 3 }
cpsSerialPortConf OBJECT IDENTIFIER ::= { cpsAP930xConf 6 }
cpsSerialGlobal OBJECT IDENTIFIER ::= { cpsSerialPortConf 1 }
cpsSerialInclude OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "File used in centralized management."
::= { cpsSerialGlobal 1 }
cpsSerialNFS OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Remote Network File System where data buffering will be
written instead of the default directory '/var/run/DB'."
::= { cpsSerialGlobal 2 }
cpsSerialLockDir OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The lock directory."
::= { cpsSerialGlobal 3 }
cpsSerialRlogin OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Location of the rlogin binary that accepts the -i flag."
::= { cpsSerialGlobal 4 }
cpsSerialPppd OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Location of the pppd binary."
::= { cpsSerialGlobal 5 }
cpsSerialTelnet OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Location of the telnet application."
::= { cpsSerialGlobal 6 }
cpsSerialSsh OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Location of the ssh application."
::= { cpsSerialGlobal 7 }
cpsSerialLocalLogins OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "This parameter is only necessary when authentication is
being performed for a port.
This is useful if the Radius authentication server is down.
0 indicates OFF,
1 indicates ON."
::= { cpsSerialGlobal 8 }
cpsSerialFacility OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "This value (0-7) is the Local facility sent to the syslog daemon."
::= { cpsSerialGlobal 9 }
cpsSerialDBFacility OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "This value (0-7) is the Local facility sent to the syslog daemon."
::= { cpsSerialGlobal 10 }
cpsSerialGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpsSerialGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { cpsSerialGlobal 11 }
cpsSerialGroupEntry OBJECT-TYPE
SYNTAX CpsSerialGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { cpsSerialGroupIndex }
::= { cpsSerialGroupTable 1 }
CpsSerialGroupEntry ::= SEQUENCE {
cpsSerialGroupIndex INTEGER,
cpsSerialGroupName DisplayString,
cpsSerialGroupUsers DisplayString
}
cpsSerialGroupIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number to identify the group."
::= { cpsSerialGroupEntry 1 }
cpsSerialGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The group name."
::= { cpsSerialGroupEntry 2 }
cpsSerialGroupUsers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The user's names."
::= { cpsSerialGroupEntry 3 }
cpsSerialSpec OBJECT IDENTIFIER ::= { cpsSerialPortConf 2 }
cpsSerialPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpsSerialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "This is the specific configuration per serial port."
::= { cpsSerialSpec 1 }
cpsSerialPortEntry OBJECT-TYPE
SYNTAX CpsSerialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "One particular serial port configuration."
INDEX { cpsSerialPortNumber }
::= { cpsSerialPortTable 1 }
CpsSerialPortEntry ::= SEQUENCE {
cpsSerialPortNumber INTEGER, -- 0 == all. X == ttyX sX.
cpsSerialPortTty DisplayString, -- associate device
cpsSerialPortName DisplayString, -- alias name
cpsSerialPortSpeed Integer32, -- physical port configuration
cpsSerialPortDataSize Integer32,
cpsSerialPortStopBits Integer32,
cpsSerialPortParity DisplayString,
cpsSerialPortFlowCtrl DisplayString,
cpsSerialPortDTRdelay Integer32,
cpsSerialPortDCDCtrl INTEGER,
cpsSerialPortLogUtmp INTEGER, -- log into UTMP
cpsSerialPortLogWtmp INTEGER, -- log into WTMP
cpsSerialPortLogform DisplayString,
cpsSerialPortAuthtype DisplayString, -- authentication type
cpsSerialPortAuthSrv1 IpAddress, -- IP address of the primary authentication server
cpsSerialPortAccSrv1 IpAddress, -- IP address of the primary accounting server
cpsSerialPortAuthTmo Integer32, -- time out per authentication query
cpsSerialPortAuthRetr Integer32, -- authentication number of retries
cpsSerialPortAuthSrv2 IpAddress, -- IP address of the secondary authentication server
cpsSerialPortAccSrv2 IpAddress, -- IP address of the secondary accounting server
cpsSerialPortAuthSecret DisplayString, -- secret used in authentication
cpsSerialPortAuthRadP INTEGER, -- accept RADIUS' user without password
cpsSerialPortAuthAcc DisplayString, -- access restriction on Users
cpsSerialPortProtocol DisplayString, -- Profile
cpsSerialPortRemoteIP DisplayString, -- remote IP address
cpsSerialPortSocketPort DisplayString, -- number of socket port
cpsSerialPortRemHost IpAddress, -- IP address of the remote Host
cpsSerialPortBanner DisplayString, -- Banner
cpsSerialPortPrompt DisplayString, -- Login prompt
cpsSerialPortTermType DisplayString, -- terminal type
cpsSerialPortAutomUsr DisplayString, -- automatic user
cpsSerialPortNetMask IpAddress, -- net mask
cpsSerialPortPppMtu Integer32,
cpsSerialPortPppMru Integer32,
cpsSerialPortPppOptions DisplayString,
cpsSerialPortPppFoption DisplayString,
cpsSerialPortModemChat DisplayString, -- initchat send to modem
cpsSerialPortSttyCmd DisplayString,
cpsSerialPortSockTx Integer32, -- socket transmission interval
cpsSerialPortSockPoll Integer32, -- socket polling interval
cpsSerialPortSockIdle Integer32, -- socket idle timeout
cpsSerialPortDBsize Integer32, -- maximum size of the data buffering file
cpsSerialPortDBtime INTEGER, -- data buffering with/without timestamp
cpsSerialPortDBmode DisplayString, -- data bufferinf mode circ or line
cpsSerialPortDBsyslog Integer32, -- size of the data send to syslog
cpsSerialPortDBmenu INTEGER, -- menu of the data buffering
cpsSerialPortDBalarm INTEGER, -- use alarm generating feature
cpsSerialPortSSHbreak DisplayString, -- break sequence (SSH)
cpsSerialPortSniffSess DisplayString, -- sniff session type
cpsSerialPortSniffAdm DisplayString, -- admin users to sniff
cpsSerialPortSniffEsc DisplayString, -- escape char to sniff session
cpsSerialPortSniffMsess DisplayString, -- multiple session
cpsSerialPortTelnetMode INTEGER, -- telnet client mode
cpsSerialPortSysBufSess INTEGER, -- syslog buffering at all times
cpsSerialPortLFSuppress INTEGER, -- LF suppression in socket_server session
cpsSerialPortAutoInput DisplayString, -- Input string to auto answer
cpsSerialPortAutoOutput DisplayString, -- Output string to auto answer
cpsSerialPortBreakInterval Integer32 -- Break interval (in ms)
}
cpsSerialPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number to identify the serial port. Value 0 is ALL."
::= { cpsSerialPortEntry 1 }
cpsSerialPortTty OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..25))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The device name for the serial port."
::= { cpsSerialPortEntry 2 }
cpsSerialPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Alias name given to the server connected to the serial port."
::= { cpsSerialPortEntry 3 }
cpsSerialPortSpeed OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "The speed of the serial port.
Supported values are:
50, 75, 110, 134, 150, 200, 300, 600,
1200, 1800, 2400, 4800, 9600, 14400, 19200,
28800, 38400, 57600, 115200, 230400, and 460800"
::= { cpsSerialPortEntry 4 }
cpsSerialPortDataSize OBJECT-TYPE
SYNTAX Integer32 (4..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The data size for the serial port."
::= { cpsSerialPortEntry 5 }
cpsSerialPortStopBits OBJECT-TYPE
SYNTAX Integer32 (0..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The number of stop bits for the serial port."
::= { cpsSerialPortEntry 6 }
cpsSerialPortParity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The parity for the serial port."
::= { cpsSerialPortEntry 7 }
cpsSerialPortFlowCtrl OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The flow control for the serial port."
::= { cpsSerialPortEntry 8 }
cpsSerialPortDTRdelay OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "This specifies how long (in milliseconds) a DTR signal
will be turned off before it is turned on again."
::= { cpsSerialPortEntry 9 }
cpsSerialPortDCDCtrl OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "DCD signal controls the connection request.
0 will indicate nocontrol,
1 will indicate control."
::= { cpsSerialPortEntry 10 }
cpsSerialPortLogUtmp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Update the login records in /var/run/utmp file.
0 will indicate inactive,
1 will indicate active."
::= { cpsSerialPortEntry 11 }
cpsSerialPortLogWtmp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Update the login records in /var/run/wtmp file.
0 will indicate inactive,
1 will indicate active."
::= { cpsSerialPortEntry 12 }
cpsSerialPortLogform OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This is the format to write the login record."
::= { cpsSerialPortEntry 13 }
cpsSerialPortAuthtype OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..25))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Authentication type."
::= { cpsSerialPortEntry 14 }
cpsSerialPortAuthSrv1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "IP address of the primary authentication server."
::= { cpsSerialPortEntry 15 }
cpsSerialPortAccSrv1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "IP address of the primary accounting server."
::= { cpsSerialPortEntry 16 }
cpsSerialPortAuthTmo OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "This is the timeout (in seconds) for the authentication
query to be answered."
::= { cpsSerialPortEntry 17 }
cpsSerialPortAuthRetr OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "This defines the number of times each server is tried
before another is contacted."
::= { cpsSerialPortEntry 18 }
cpsSerialPortAuthSrv2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "IP address of the secondary authentication server."
::= { cpsSerialPortEntry 19 }
cpsSerialPortAccSrv2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "IP address of the secondary accounting server."
::= { cpsSerialPortEntry 20 }
cpsSerialPortAuthSecret OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This is the shared secret with authentication servers."
::= { cpsSerialPortEntry 21 }
cpsSerialPortAuthRadP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Radius state.
0 will indicate inactive,
1 will indicate active."
::= { cpsSerialPortEntry 22 }
cpsSerialPortAuthAcc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Access restriction."
::= { cpsSerialPortEntry 23 }
cpsSerialPortProtocol OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Defines the serial port's protocol."
::= { cpsSerialPortEntry 24 }
cpsSerialPortRemoteIP OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This is the default IP address of the serial port."
::= { cpsSerialPortEntry 25 }
cpsSerialPortSocketPort OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This defines an alternative labeling system for the serial port."
::= { cpsSerialPortEntry 26 }
cpsSerialPortRemHost OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IP address of the host to which the serial port will connect."
::= { cpsSerialPortEntry 27 }
cpsSerialPortBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..250))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This defines the banner."
::= { cpsSerialPortEntry 28 }
cpsSerialPortPrompt OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..250))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This defines the login prompt to the serial port."
::= { cpsSerialPortEntry 29 }
cpsSerialPortTermType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This defines the terminal type."
::= { cpsSerialPortEntry 30 }
cpsSerialPortAutomUsr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "This defines the automatic user."
::= { cpsSerialPortEntry 31 }
cpsSerialPortNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "The network mask used in dial in connection."
::= { cpsSerialPortEntry 32 }
cpsSerialPortPppMtu OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "The PPP MTU - dial in connection."
::= { cpsSerialPortEntry 33 }
cpsSerialPortPppMru OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "The PPP MRU - dial in connection."
::= { cpsSerialPortEntry 34 }
cpsSerialPortPppOptions OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION "The PPP options when the PPP session is autodetected."
::= { cpsSerialPortEntry 35 }
cpsSerialPortPppFoption OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION "The PPP forced options when the user has already been authenticated."
::= { cpsSerialPortEntry 36 }
cpsSerialPortModemChat OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION "The initchat send to modem connected."
::= { cpsSerialPortEntry 37 }
cpsSerialPortSttyCmd OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..180))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The tty settings after socket connection is established."
::= { cpsSerialPortEntry 38 }
cpsSerialPortSockTx OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "Defines the delay (in milliseconds) before transmission to
the Ethernet of data received through a serial port."
::= { cpsSerialPortEntry 39 }
cpsSerialPortSockPoll OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "Keep-alive timer (milliseconds) for the TCP connection."
::= { cpsSerialPortEntry 40 }
cpsSerialPortSockIdle OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "The idle timeout in seconds."
::= { cpsSerialPortEntry 41 }
cpsSerialPortDBsize OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "Maximum size of the data buffering file."
::= { cpsSerialPortEntry 42 }
cpsSerialPortDBtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Timestamp in data buffering.
0 will indicate inactive,
1 will indicate active."
::= { cpsSerialPortEntry 43 }
cpsSerialPortDBmode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Data buffering mode : circ or line."
::= { cpsSerialPortEntry 44 }
cpsSerialPortDBsyslog OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "Size of the data buffer sent to syslog."
::= { cpsSerialPortEntry 45 }
cpsSerialPortDBmenu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Menu type for data buffering.
0 will indicate display Menu,
1 will indicate inactive,
2 will indicate DB,
3 will indicate Parc."
::= { cpsSerialPortEntry 46 }
cpsSerialPortDBalarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Alarm generation status.
0 will indicate inactive,
1 will indicate active."
::= { cpsSerialPortEntry 47 }
cpsSerialPortSSHbreak OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Break sequence - ssh session."
::= { cpsSerialPortEntry 48 }
cpsSerialPortSniffSess OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Sniff session type."
::= { cpsSerialPortEntry 49 }
cpsSerialPortSniffAdm OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "List of admin users allowed to sniff session."
::= { cpsSerialPortEntry 50 }
cpsSerialPortSniffEsc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Escape sequence used in sniff session."
::= { cpsSerialPortEntry 51 }
cpsSerialPortSniffMsess OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
::= { cpsSerialPortEntry 52 }
cpsSerialPortTelnetMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Mode negotiated by client telnet with the server.
0 will indicate text,
1 will indicate binary."
::= { cpsSerialPortEntry 53 }
cpsSerialPortSysBufSess OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Syslog Buffering at all times.
0 will indicate yes,
1 will indicate no."
::= { cpsSerialPortEntry 54 }
cpsSerialPortLFSuppress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "LF suppression in socket_server session.
0 will indicate inactive,
1 will indicate active."
::= { cpsSerialPortEntry 55 }
cpsSerialPortAutoInput OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Input string used for auto answer."
::= { cpsSerialPortEntry 56 }
cpsSerialPortAutoOutput OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Output string used for auto answer."
::= { cpsSerialPortEntry 57 }
cpsSerialPortBreakInterval OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION "The break interval in milliseconds."
::= { cpsSerialPortEntry 58 }
-- The console Port Server AP930x information group
cpsInfoSerialPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpsInfoSerialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "This is the information of the specific serial port."
::= { cpsAP930xInfo 1 }
cpsInfoSerialPortEntry OBJECT-TYPE
SYNTAX CpsInfoSerialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "One particular serial port."
INDEX { cpsInfoSerialPortNumber }
::= { cpsInfoSerialPortTable 1 }
CpsInfoSerialPortEntry ::= SEQUENCE {
cpsInfoSerialPortNumber INTEGER, -- X == ttyX sX.
cpsInfoSerialPortTty DisplayString, -- associate device
cpsInfoSerialPortName DisplayString, -- alias name
cpsInfoSerialPortSpeed Integer32,
cpsInfoSerialPortTxBytes Integer32,
cpsInfoSerialPortRXBytes Integer32,
cpsInfoSerialPortErrFrame Integer32,
cpsInfoSerialPortErrParity Integer32,
cpsInfoSerialPortErrBreaks Integer32,
cpsInfoSerialPortErrOverrun Integer32,
cpsInfoSerialPortSigDTR INTEGER,
cpsInfoSerialPortSigCD INTEGER,
cpsInfoSerialPortSigDSR INTEGER,
cpsInfoSerialPortSigRTS INTEGER,
cpsInfoSerialPortSigCTS INTEGER,
cpsInfoSerialPortSigRI INTEGER
}
cpsInfoSerialPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number to identify the serial port."
::= { cpsInfoSerialPortEntry 1 }
cpsInfoSerialPortTty OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The device name for the serial port."
::= { cpsInfoSerialPortEntry 2 }
cpsInfoSerialPortName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Alias name given to the server connected to the serial port."
::= { cpsInfoSerialPortEntry 3 }
cpsInfoSerialPortSpeed OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The speed for serial port."
::= { cpsInfoSerialPortEntry 4 }
cpsInfoSerialPortTxBytes OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of transmitted bytes by the serial port."
::= { cpsInfoSerialPortEntry 5 }
cpsInfoSerialPortRXBytes OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of received bytes by the serial port."
::= { cpsInfoSerialPortEntry 6 }
cpsInfoSerialPortErrFrame OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of frame errors."
::= { cpsInfoSerialPortEntry 7 }
cpsInfoSerialPortErrParity OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of parity errors."
::= { cpsInfoSerialPortEntry 8 }
cpsInfoSerialPortErrBreaks OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of breaks errors."
::= { cpsInfoSerialPortEntry 9 }
cpsInfoSerialPortErrOverrun OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of overrun errors."
::= { cpsInfoSerialPortEntry 10 }
cpsInfoSerialPortSigDTR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The state of the DTR signal.
0 will indicate down,
1 will indicate up."
::= { cpsInfoSerialPortEntry 11 }
cpsInfoSerialPortSigCD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The state of the DCD signal.
0 will indicate down,
1 will indicate up."
::= { cpsInfoSerialPortEntry 12 }
cpsInfoSerialPortSigDSR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The state of the DSR signal.
0 will indicate down,
1 will indicate up."
::= { cpsInfoSerialPortEntry 13 }
cpsInfoSerialPortSigRTS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The state of the RTS signal.
0 will indicate down,
1 will indicate up."
::= { cpsInfoSerialPortEntry 14 }
cpsInfoSerialPortSigCTS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The state of the CTS signal.
0 will indicate down,
1 will indicate up."
::= { cpsInfoSerialPortEntry 15 }
cpsInfoSerialPortSigRI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The state of the RI signal.
0 will indicate down,
1 will indicate up."
::= { cpsInfoSerialPortEntry 16 }
-- The console Port Server AP930x administrative group
apCPSSave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Exec saveconf command.
0 will indicate don't save,
1 will indicate save."
::= { cpsAP930xAdm 1 }
apCPSSerialHUP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Exec signal_ras hup command.
0 will indicate no restart,
1 will indicate restart."
::= { cpsAP930xAdm 2 }
-- the access PX group
accessPXIdentAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Access PX alarm status
1 = Normal
2 = Warning
3 = Critical."
::= { accessPXIdent 1 }
accessPXIdentProductNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product number of the Access PX."
::= { accessPXIdent 2 }
accessPXIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision number of the Access PX."
::= { accessPXIdent 3 }
accessPXIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of manufacture of the Access PX."
::= { accessPXIdent 4 }
accessPXIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Access PX."
::= { accessPXIdent 5 }
accessPXConfigCardReaderEnableDisableAction OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to disable/enable the card reader."
::= { accessPXConfig 1 }
accessPXConfigAutoRelockTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time (10 - 60) in seconds when the door will automatically relock
after it has been unlocked and the handle has not been opened."
::= { accessPXConfig 2 }
accessPXConfigCardFormat OBJECT-TYPE
SYNTAX INTEGER {
hidStd26 (1),
hid37Bit (2),
hid37BitWithFacility (3),
hidCorp1000 (4),
mifareclassic4b (5),
mifareclassic7b (6),
mifaredesfire (7),
mifareplus (8),
iCLASS8b (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates and controls the various card format."
::= { accessPXConfig 3 }
accessPXConfigFrontDoorLockControl OBJECT-TYPE
SYNTAX INTEGER {
unlock (1),
lock (2),
notInstalledReadOnly (3),
disconnectedReadOnly (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control action (unlock, lock) for the front door. Setting this OID
will unlock or lock the front door. Getting this OID will respond
with the current state of the front door lock which could be
1 = unlocked,
2 = locked,
3 = not installed,
4 = disconnected."
::= { accessPXConfigFront 1 }
accessPXConfigFrontDoorMaxOpenTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time in minutes, (1 - 120), that the front door can be
allowed to remain open without generating an alarm condition."
::= { accessPXConfigFront 2 }
accessPXStatusFrontDoorLock OBJECT-TYPE
SYNTAX INTEGER {
unlocked (1),
locked (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Present state of the front door lock: unlocked, locked,
not installed, or disconnected."
::= { accessPXStatusFront 1 }
accessPXStatusFrontDoor OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Present state of the front door: open, closed,
not installed, or disconnected."
::= { accessPXStatusFront 2 }
accessPXStatusFrontDoorHandle OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Present state of the front door handle: open, closed,
not installed, or disconnected."
::= { accessPXStatusFront 3 }
accessPXStatusFrontDoorMaxOpenTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time in minutes, (1 - 120), that the front door can be
allowed to remain open without generating an alarm condition."
::= { accessPXStatusFront 4 }
accessPXStatusFrontDoorAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Front door alarm status
1 = Normal
2 = Warning
3 = Critical
4 = Front door not installed."
::= { accessPXStatusFront 5 }
accessPXConfigRearDoorLockControl OBJECT-TYPE
SYNTAX INTEGER {
unlock (1),
lock (2),
notInstalledReadOnly (3),
disconnectedReadOnly (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control action (unlock, lock) for the rear door. Setting this OID
will unlock or lock the rear door. Getting this OID will respond
with the current state of the rear door lock which could be
1 = unlocked,
2 = locked,
3 = not installed,
4 = disconnected."
::= { accessPXConfigRear 1 }
accessPXConfigRearDoorMaxOpenTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time in minutes, (1 - 120), that the rear door can be
allowed to remain open without generating an alarm condition."
::= { accessPXConfigRear 2 }
accessPXStatusRearDoorLock OBJECT-TYPE
SYNTAX INTEGER {
unlocked (1),
locked (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Present state of the rear door lock: unlocked, locked,
not installed, or disconnected."
::= { accessPXStatusRear 1 }
accessPXStatusRearDoor OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Present state of the rear door: open, closed,
not installed, or disconnected."
::= { accessPXStatusRear 2 }
accessPXStatusRearDoorHandle OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Present state of the rear door handle: open, closed,
not installed, or disconnected."
::= { accessPXStatusRear 3 }
accessPXStatusRearDoorMaxOpenTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time in minutes, (1 - 120), that the rear door can be
allowed to remain open without generating an alarm condition."
::= { accessPXStatusRear 4 }
accessPXStatusRearDoorAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rear door alarm status
1 = Normal
2 = Warning
3 = Critical
4 = Rear door not installed."
::= { accessPXStatusRear 5 }
accessPXConfigBeaconName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for the Beacon."
::= { accessPXConfigBeacon 1 }
accessPXConfigBeaconLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for the location of the Beacon."
::= { accessPXConfigBeacon 2 }
accessPXConfigBeaconAction OBJECT-TYPE
SYNTAX INTEGER {
turnOff (1),
turnOn (2),
notInstalledReadOnly (3),
disconnectedReadOnly (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control action (turnOff, turnOn) for the beacon. Setting this OID
will turn the beacon off or on. Getting this OID will respond
with the current state which could be
1 = off,
2 = on,
3 = not installed,
4 = disconnected."
::= { accessPXConfigBeacon 3 }
accessPXStatusBeaconName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the beacon."
::= { accessPXStatusBeacon 1 }
accessPXStatusBeaconLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the location of the beacon."
::= { accessPXStatusBeacon 2 }
accessPXStatusBeaconCurrentState OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2),
notInstalled (3),
disconnected (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the beacon: off, on,
not installed, or disconnected."
::= { accessPXStatusBeacon 3 }
-- the apcLocalDisplay group
apcLocalDisplayIdentDisplayType OBJECT-TYPE
SYNTAX INTEGER {
noDisplayFound (1),
powerviewRM (2),
powerviewWW (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Numeric value used to identify the type of display in use."
::= { apcLocalDisplayIdent 1 }
apcLocalDisplayIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the local display."
::= { apcLocalDisplayIdent 2 }
apcLocalDisplayIdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision number of the local display."
::= { apcLocalDisplayIdent 3 }
apcLocalDisplayIdentOptions OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A display-specific string identifying options in the local display."
::= { apcLocalDisplayIdent 4 }
apcLocalDisplayIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of manufacture of the local display, if available."
::= { apcLocalDisplayIdent 5 }
apcLocalDisplayIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the local display, if available."
::= { apcLocalDisplayIdent 6 }
apcLocalDisplayConfigAlarmBeeper OBJECT-TYPE
SYNTAX INTEGER {
beeperDisabled (1),
beeperEnabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The alarm beeper setting for the local display.
When enabled, the alarm beeper will begin to sound whenever
there a new alarm becomes active. The alarm beeper will continue to
periodically sound until a key is pressed on the display."
::= { apcLocalDisplayConfig 1 }
apcLocalDisplayConfigBeeperVolume OBJECT-TYPE
SYNTAX INTEGER {
beeperDisabled (1),
beeperLow (2),
beeperMedium (3),
beeperHigh (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The volume setting of the beeper on the local display."
::= { apcLocalDisplayConfig 2 }
apcLocalDisplayConfigCheckLogIndicator OBJECT-TYPE
SYNTAX INTEGER {
checklogNotPresent (1),
checklogDisabled (2),
checklogInformational (3),
checklogWarning (4),
checklogCritical (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum level event severity level required to illuminate
the check log light on the local display.
notPresent (1) indicates that the display does not have a check log light."
::= { apcLocalDisplayConfig 3 }
apcLocalDisplayConfigKeyClick OBJECT-TYPE
SYNTAX INTEGER {
keyclickDisabled (1),
keyclickEnabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The key click setting of the local display."
::= { apcLocalDisplayConfig 4 }
apcLocalDisplayConfigContrast OBJECT-TYPE
SYNTAX INTEGER {
contrast1 (1),
contrast2 (2),
contrast3 (3),
contrast4 (4),
contrast5 (5),
contrast6 (6),
contrast7 (7),
contrast8 (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contrast level of the local display."
::= { apcLocalDisplayConfig 5 }
-- the software group
-- the powerNetSubAgent group
-- the powerNetSoftwareSystem group
powerNetSoftwareSystemDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..79))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A brief description of the PowerNet sub-agent."
::= { powerNetSoftwareSystem 1 }
powerNetSoftwareOid OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The object identifier of the PowerNet sub-agent."
::= { powerNetSoftwareSystem 2 }
-- powerNetSmuxPeer OBJECT IDENTIFIER ::= { powerNetSoftwareOid 1 }
-- powerNetDPIPeer OBJECT IDENTIFIER ::= { powerNetSoftwareOid 2 }
powerNetSoftwareSystemUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time that the sub-agent has been running."
::= { powerNetSoftwareSystem 3 }
-- powerNetSoftwareConfig group
powerNetSoftwareTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of software modules supporting the UPS."
::= { powerNetSoftwareConfig 1 }
powerNetSoftwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerNetSoftwareEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the software monitoring the UPS."
::= { powerNetSoftwareConfig 2 }
powerNetSoftwareEntry OBJECT-TYPE
SYNTAX PowerNetSoftwareEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information on a software module."
INDEX { moduleNumber }
::= { powerNetSoftwareTable 1 }
PowerNetSoftwareEntry ::=
SEQUENCE {
moduleNumber
INTEGER,
moduleName
DisplayString,
moduleVersion
DisplayString,
moduleDate
DisplayString
}
moduleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into the Software Entry Table"
::= { powerNetSoftwareEntry 1 }
moduleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..79))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the software module."
::= { powerNetSoftwareEntry 2 }
moduleVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the software module."
::= { powerNetSoftwareEntry 3 }
moduleDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the software module represented as mm-dd-yy."
::= { powerNetSoftwareEntry 4 }
-- the StruxureWare Operations group
serverStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
stopped(2),
running(3),
running-missing(4),
initializing(5),
starting(6),
disaster-recovery(7),
postoffice-inconsistent(8),
missing-jgroups(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the StruxureWare Operations server:
1: The status of the application server is unknown. Check Webmin and if
the problem persists, contact Technical Support.
2: Restart the StruxureWare DC Operation server. If the server was part of
a cluster, see the StruxureWare DC Operation User Assistance about
rejoining the cluster. If the problem persists, contact Technical Support.
3: No problem.
4: High availability is lost. The StruxureWare DC Operation Application
server is running but one or more nodes are not available. If the
StruxureWare DC Operation server is part of a cluster, ensure all nodes
are running and there is a network connection between the nodes. If the
problem persists, contact Technical Support.
5: Wait for the StruxureWare DC Operation Application server to initialize.
If the problem persists, contact Technical Support.
6: Wait for the StruxureWare DC Operation Application server to finish
starting.
If the problem persists, contact Technical Support.
7: This node is running in Disaster Recovery mode.
8: The JBoss postoffice is currently inconsistent. This may be a temporary
issue. If the problem persists for more than 10 minutes,
contact Technical Support.
9: The JBoss is missing jgroups. This may be a temporary issue. If the
problem persists for more than 10 minutes, contact Technical Support."
::= { struxureWareOperationsStatus 1 }
databaseStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
stopped(2),
running(3),
detached(4),
catching-up(5),
attaching(6),
running-master(7),
running-primary-slave(8),
running-slave(9),
running-alone(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the StruxureWare Operations database:
1: The status of the database is unknown. Check Webmin and if the problem
persists, contact Technical Support.
2: Restart the StruxureWare DC Operation server. If the server was part of
a cluster, see the StruxureWare DC Operation User Assistance about
rejoining the cluster. If the problem persists, contact Technical Support.
3: No problem.
4: High availability is lost. The database is detached from the cluster
and does not receive updates. See the StruxureWare DC Operation User
Assistance about reattaching the database node to the StruxureWare DC
Operation cluster.
If the problem persists, contact Technical Support.
5: The database is catching up with the cluster. Wait for the StruxureWare
DC Operation database to retrieve all updates from the master node.
If the problem persists, contact Technical Support.
6: The database is attaching to the cluster. Wait for the StruxureWare
Operation database to attach to the cluster. If the problem persists,
contact Technical Support.
7: The database is the master in a cluster.
8: The database is the primary slave in the cluster. All changes on master
are synchronously replicated to this node.
9: The database is a secondary slave in the cluster. All changes on
master are asynchronously replicated to this node.
10: The database does not replicate its changes to other nodes."
::= { struxureWareOperationsStatus 2 }
loadBalancerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
stopped(2),
running(3),
running-missing(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the StruxureWare Operations load balancer:
1: Load Balancer status is unknown. Check Webmin and if the problem
persists, contact Technical Support.
2: Load Balancer stopped. Restart the StruxureWare DC Operation server.
If the problem persists, contact Technical Support.
3: Normal status
4: High availability is lost. The StruxureWare DC Operation Load Balancer
is running but one or more nodes are not available. If the StruxureWare DC
Operation server is part of a cluster, ensure all nodes are running and
there is a network connection between the nodes. If the problem persists,
contact Technical Support."
::= { struxureWareOperationsStatus 3 }
essentialServicesStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
stopped(2),
running(3),
time-sync-problems(4),
backup-problems(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the StruxureWare Operations essential services:
1: Unknown status. Check Webmin and if the problem persists, contact
Technical Support.
2: Essential services are not running on the StruxureWare DC Operation
server. Reboot the node and monitor the status page in Webmin. If the
problem persists, contact Technical Support.
3: Normal status
4: The time difference between the StruxureWare DC Operation slave and the
master node is too big. Correct the time on the slave to match the time on
the master. Consider using an NTP server. If the problem persists,
contact Technical Support.
5: The last backup that was attempted on the StruxureWare DC Operation
server has failed. Make certain that the system can write to the location
specified as backup location. This is particularly relevant for network
attached storage. If the problem persists, contact Technical Support."
::= { struxureWareOperationsStatus 4 }
etlStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
running(2),
failed(3),
paused(4),
stopped(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the StruxureWare Operations ETL services:
1: Unknown status. Check the network configuration and the server
network settings. If the problem persists, contact
Technical Support (http://www.apc.com/go/direct/index.cfm?tag=support).
2: Normal status,
3: ETL Transformations have failed and are subsequently stopped.
Investigate the cause of the failure. If the problem persists, contact
Technical Support (http://www.apc.com/go/direct/index.cfm?tag=support).
4: ETL Transformations are currently paused.
5: ETL Transformations are currently stopped."
::= { struxureWareOperationsStatus 5 }
-- the software group
-- the powerChuteNetworkShutdown group
-- the pcnsIdent group
pcnshostname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hostname of the PCNS instance."
::= { pcnsIdent 1 }
pcnsVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of PCNS installed. x.x.x"
::= { pcnsIdent 2 }
pcnsOS OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of OS PCNS is Installed on."
::= { pcnsIdent 3 }
pcnsJavaVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of Java PCNS is running on."
::= { pcnsIdent 4 }
-- the software group
-- the powerChuteNetworkShutdown group
-- the pcnsNetworking group
pcnsUIProtocol OBJECT-TYPE
SYNTAX INTEGER {
http(1),
https(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Protocol used to connect to the PCNS UI."
::= { pcnsNetworking 1 }
pcnsHttpPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port used for PCNS http UI."
::= { pcnsNetworking 2 }
pcnsHttpsPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port used for PCNS https UI."
::= { pcnsNetworking 3 }
pcnsNetworkConfig OBJECT-TYPE
SYNTAX INTEGER {
ipV4(1),
ipV6(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Configuration of the TCP Network."
::= { pcnsNetworking 4 }
pcnsVirtualInstall OBJECT-TYPE
SYNTAX INTEGER {
none(1),
hyper-V(2),
vmWare(3),
nutanixAHV(4),
nutanixESXi(5),
simpliVity(6),
hyperFlex(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Virtualization technology in use by PCNS."
::= { pcnsNetworking 5 }
-- the software group
-- the powerChuteNetworkShutdown group
-- the pcnsNMC group
pcnsMode OBJECT-TYPE
SYNTAX INTEGER {
single(1),
redundant(2),
parallel(3),
advanced(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Configuration mode of the UPS(s) which PCNS is monitoring."
::= { pcnsNMC 1 }
pcnsNMCPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port used to connect to all of the Network Management Card(s)."
::= { pcnsNMC 2 }
pcnsNMCProtocol OBJECT-TYPE
SYNTAX INTEGER {
http(1),
https(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Protocol used to connect to all of the Network Management Card(s)."
::= { pcnsNMC 3 }
pcnsNmcTable OBJECT-TYPE
SYNTAX SEQUENCE OF PCNSNMCEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Network Management Cards in the UPS's which PCNS is monitoring to provide safe shutdown."
::= { pcnsNMC 4 }
pcnsNmcEntry OBJECT-TYPE
SYNTAX PCNSNMCEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Details of the NMC."
INDEX { pcnsNmcIndex }
::= { pcnsNmcTable 1 }
PCNSNMCEntry ::=
SEQUENCE {
pcnsNmcIndex
Gauge,
pcnsNmcAddr
IpAddress,
pcnsNmcOutlet
Gauge
}
pcnsNmcIndex OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the NMC within PCNS setup."
::= { pcnsNmcEntry 1 }
pcnsNmcAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the NMC."
::= { pcnsNmcEntry 2 }
pcnsNmcOutlet OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Outlet Group which PCNS is enrolled with on the NMC."
::= { pcnsNmcEntry 3 }
-- the software group
-- the powerChuteNetworkShutdown group
-- the pcnsEvents group
pcnsPowerFailed OBJECT IDENTIFIER ::= { pcnsEvents 1 }
pcnsPowerFailedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsPowerFailed 1 }
pcnsPowerFailedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsPowerFailed 2 }
pcnsPowerFailedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsPowerFailed 3 }
pcnsPowerFailedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsPowerFailed 4 }
pcnsPowerFailedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsPowerFailed 5 }
pcnsPowerFailedEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsPowerFailed 6 }
pcnsPowerFailedShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsPowerFailed 7 }
pcnsPowerRestored OBJECT IDENTIFIER ::= { pcnsEvents 2 }
pcnsPowerRestoredDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsPowerRestored 1 }
pcnsPowerRestoredEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsPowerRestored 2 }
pcnsPowerRestoredEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsPowerRestored 3 }
pcnsPowerRestoredCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsPowerRestored 4 }
pcnsPowerRestoredCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsPowerRestored 5 }
pcnsOverload OBJECT IDENTIFIER ::= { pcnsEvents 3 }
pcnsOverloadDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsOverload 1 }
pcnsOverloadEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsOverload 2 }
pcnsOverloadEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsOverload 3 }
pcnsOverloadCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsOverload 4 }
pcnsOverloadCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsOverload 5 }
pcnsOverloadEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsOverload 6 }
pcnsOverloadShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsOverload 7 }
pcnsOverloadSolved OBJECT IDENTIFIER ::= { pcnsEvents 4 }
pcnsOverloadSolvedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsOverloadSolved 1 }
pcnsOverloadSolvedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsOverloadSolved 2 }
pcnsOverloadSolvedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsOverloadSolved 3 }
pcnsOverloadSolvedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsOverloadSolved 4 }
pcnsOverloadSolvedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsOverloadSolved 5 }
pcnsRunTimeExceeded OBJECT IDENTIFIER ::= { pcnsEvents 5 }
pcnsRunTimeExceededDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsRunTimeExceeded 1 }
pcnsRunTimeExceededEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsRunTimeExceeded 2 }
pcnsRunTimeExceededEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsRunTimeExceeded 3 }
pcnsRunTimeExceededCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsRunTimeExceeded 4 }
pcnsRunTimeExceededCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsRunTimeExceeded 5 }
pcnsRunTimeExceededEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsRunTimeExceeded 6 }
pcnsRunTimeExceededShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsRunTimeExceeded 7 }
pcnsRunTimeWithinRange OBJECT IDENTIFIER ::= { pcnsEvents 6 }
pcnsRunTimeWithinRangeDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsRunTimeWithinRange 1 }
pcnsRunTimeWithinRangeEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsRunTimeWithinRange 2 }
pcnsRunTimeWithinRangeEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsRunTimeWithinRange 3 }
pcnsRunTimeWithinRangeCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsRunTimeWithinRange 4 }
pcnsRunTimeWithinRangeCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsRunTimeWithinRange 5 }
pcnsRunTimeBelowThreshold OBJECT IDENTIFIER ::= { pcnsEvents 7 }
pcnsRunTimeBelowThresholdDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsRunTimeBelowThreshold 1 }
pcnspcnsRunTimeBelowThresholdEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsRunTimeBelowThreshold 2 }
pcnsRunTimeBelowThresholdEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsRunTimeBelowThreshold 3 }
pcnsRunTimeBelowThresholdCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsRunTimeBelowThreshold 4 }
pcnsRunTimeBelowThresholdEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsRunTimeBelowThreshold 6 }
pcnsRunTimeBelowThresholdCommandFileThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the Runtime Remaining falls below this (seconds), the command file will run."
::= { pcnsRunTimeBelowThreshold 8 }
pcnsRunTimeBelowThresholdShutdownThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the Runtime Remaining falls below this (seconds), the shutdown will begin."
::= { pcnsRunTimeBelowThreshold 9 }
pcnsRunTimeAboveThreshold OBJECT IDENTIFIER ::= { pcnsEvents 8 }
pcnsRunTimeAboveThresholdDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsRunTimeAboveThreshold 1 }
pcnsRunTimeAboveThresholdEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsRunTimeAboveThreshold 2 }
pcnsRunTimeAboveThresholdEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsRunTimeAboveThreshold 3 }
pcnsRunTimeAboveThresholdCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsRunTimeAboveThreshold 4 }
pcnsRunTimeAboveThresholdCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsRunTimeAboveThreshold 5 }
pcnsBatteryDischarged OBJECT IDENTIFIER ::= { pcnsEvents 10 }
pcnsBatteryDischargedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBatteryDischarged 1 }
pcnsBatteryDischargedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBatteryDischarged 2 }
pcnsBatteryDischargedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBatteryDischarged 3 }
pcnsBatteryDischargedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBatteryDischarged 4 }
pcnsBatteryDischargedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBatteryDischarged 5 }
pcnsBatteryDischargedEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsBatteryDischarged 6 }
pcnsBatteryDischargedShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsBatteryDischarged 7 }
pcnsBatteryChargeInRange OBJECT IDENTIFIER ::= { pcnsEvents 11 }
pcnsBatteryChargeInRangeDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBatteryChargeInRange 1 }
pcnsBatteryChargeInRangeEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBatteryChargeInRange 2 }
pcnsBatteryChargeInRangeEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBatteryChargeInRange 3 }
pcnsBatteryChargeInRangeCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBatteryChargeInRange 4 }
pcnsBatteryChargeInRangeCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBatteryChargeInRange 5 }
pcnsFaultBypassEnabled OBJECT IDENTIFIER ::= { pcnsEvents 12 }
pcnsFaultBypassEnabledDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsFaultBypassEnabled 1 }
pcnsFaultBypassEnabledEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsFaultBypassEnabled 2 }
pcnsFaultBypassEnabledEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsFaultBypassEnabled 3 }
pcnsFaultBypassEnabledCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsFaultBypassEnabled 4 }
pcnsFaultBypassEnabledCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsFaultBypassEnabled 5 }
pcnsFaultBypassEnabledEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsFaultBypassEnabled 6 }
pcnsFaultBypassEnabledShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsFaultBypassEnabled 7 }
pcnsBypassEnabled OBJECT IDENTIFIER ::= { pcnsEvents 13 }
pcnsBypassEnabledDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBypassEnabled 1 }
pcnsBypassEnabledEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBypassEnabled 2 }
pcnsBypassEnabledEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBypassEnabled 3 }
pcnsBypassEnabledCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBypassEnabled 4 }
pcnsBypassEnabledCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBypassEnabled 5 }
pcnsBypassEnabledEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsBypassEnabled 6 }
pcnsBypassEnabledShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsBypassEnabled 7 }
pcnsBypassManualEnabled OBJECT IDENTIFIER ::= { pcnsEvents 14 }
pcnsBypassManualEnabledDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBypassManualEnabled 1 }
pcnsBypassManualEnabledEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBypassManualEnabled 2 }
pcnsBypassManualEnabledEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBypassManualEnabled 3 }
pcnsBypassManualEnabledCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBypassManualEnabled 4 }
pcnsBypassManualEnabledCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBypassManualEnabled 5 }
pcnsBypassManualEnabledEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsBypassManualEnabled 6 }
pcnsBypassManualEnabledShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsBypassManualEnabled 7 }
pcnsBypassDisabled OBJECT IDENTIFIER ::= { pcnsEvents 15 }
pcnsBypassDisabledDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBypassDisabled 1 }
pcnsBypassDisabledEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBypassDisabled 2 }
pcnsBypassDisabledEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBypassDisabled 3 }
pcnsBypassDisabledCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBypassDisabled 4 }
pcnsBypassDisabledCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBypassDisabled 5 }
pcnsBypassContactorFailed OBJECT IDENTIFIER ::= { pcnsEvents 16 }
pcnsBypassContactorFailedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBypassContactorFailed 1 }
pcnsBypassContactorFailedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBypassContactorFailed 2 }
pcnsBypassContactorFailedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBypassContactorFailed 3 }
pcnsBypassContactorFailedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBypassContactorFailed 4 }
pcnsBypassContactorFailedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBypassContactorFailed 5 }
pcnsBypassContactorFailedEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsBypassContactorFailed 6 }
pcnsBypassContactorFailedShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsBypassContactorFailed 7 }
pcnsBypassContactorOk OBJECT IDENTIFIER ::= { pcnsEvents 17 }
pcnsBypassContactorOkDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsBypassContactorOk 1 }
pcnsBypassContactorOkEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsBypassContactorOk 2 }
pcnsBypassContactorOkEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsBypassContactorOk 3 }
pcnsBypassContactorOkCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsBypassContactorOk 4 }
pcnsBypassContactorOkCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsBypassContactorOk 5 }
pcnsCommunicationLostOnBattery OBJECT IDENTIFIER ::= { pcnsEvents 18 }
pcnsCommunicationLostOnBatteryDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsCommunicationLostOnBattery 1 }
pcnsCommunicationLostOnBatteryEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsCommunicationLostOnBattery 2 }
pcnsCommunicationLostOnBatteryEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsCommunicationLostOnBattery 3 }
pcnsCommunicationLostOnBatteryCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsCommunicationLostOnBattery 4 }
pcnsCommunicationLostOnBatteryCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsCommunicationLostOnBattery 5 }
pcnsCommunicationLostOnBatteryEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsCommunicationLostOnBattery 6 }
pcnsCommunicationLostOnBatteryShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsCommunicationLostOnBattery 7 }
pcnsCommunicationLost OBJECT IDENTIFIER ::= { pcnsEvents 19 }
pcnsCommunicationLostDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsCommunicationLost 1 }
pcnsCommunicationLostEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsCommunicationLost 2 }
pcnsCommunicationLostEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsCommunicationLost 3 }
pcnsCommunicationLostCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsCommunicationLost 4 }
pcnsCommunicationLostCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsCommunicationLost 5 }
pcnsCommunicationLostEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsCommunicationLost 6 }
pcnsCommunicationLostShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsCommunicationLost 7 }
pcnsNetCommunicationLost OBJECT IDENTIFIER ::= { pcnsEvents 20 }
pcnsNetCommunicationLostDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsNetCommunicationLost 1 }
pcnsNetCommunicationLostEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsNetCommunicationLost 2 }
pcnsNetCommunicationLostEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsNetCommunicationLost 3 }
pcnsNetCommunicationLostCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsNetCommunicationLost 4 }
pcnsNetCommunicationLostCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsNetCommunicationLost 5 }
pcnsNetCommunicationLostEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsNetCommunicationLost 6 }
pcnsNetCommunicationLostShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsNetCommunicationLost 7 }
pcnsCommunicationEstablished OBJECT IDENTIFIER ::= { pcnsEvents 21 }
pcnsCommunicationEstablishedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsCommunicationEstablished 1 }
pcnsCommunicationEstablishedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsCommunicationEstablished 2 }
pcnsCommunicationEstablishedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsCommunicationEstablished 3 }
pcnsCommunicationEstablishedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsCommunicationEstablished 4 }
pcnsCommunicationEstablishedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsCommunicationEstablished 5 }
pcnsMinRedundancyLost OBJECT IDENTIFIER ::= { pcnsEvents 22 }
pcnsMinRedundancyLostDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsMinRedundancyLost 1 }
pcnsMinRedundancyLostEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsMinRedundancyLost 2 }
pcnsMinRedundancyLostEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsMinRedundancyLost 3 }
pcnsMinRedundancyLostCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsMinRedundancyLost 4 }
pcnsMinRedundancyLostCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsMinRedundancyLost 5 }
pcnsMinRedundancyLostEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsMinRedundancyLost 6 }
pcnsMinRedundancyLostShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsMinRedundancyLost 7 }
pcnsMinRedundancyRegained OBJECT IDENTIFIER ::= { pcnsEvents 23 }
pcnsMinRedundancyRegainedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsMinRedundancyRegained 1 }
pcnsMinRedundancyRegainedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsMinRedundancyRegained 2 }
pcnsMinRedundancyRegainedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsMinRedundancyRegained 3 }
pcnsMinRedundancyRegainedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsMinRedundancyRegained 4 }
pcnsMinRedundancyRegainedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsMinRedundancyRegained 5 }
pcnsParallelRedundancyLost OBJECT IDENTIFIER ::= { pcnsEvents 24 }
pcnsParallelRedundancyLostDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsParallelRedundancyLost 1 }
pcnsParallelRedundancyLostEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsParallelRedundancyLost 2 }
pcnsParallelRedundancyLostEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsParallelRedundancyLost 3 }
pcnsParallelRedundancyLostCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsParallelRedundancyLost 4 }
pcnsParallelRedundancyLostCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsParallelRedundancyLost 5 }
pcnsParallelRedundancyLostEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsParallelRedundancyLost 6 }
pcnsParallelRedundancyLostShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsParallelRedundancyLost 7 }
pcnsParallelRedundancyRegained OBJECT IDENTIFIER ::= { pcnsEvents 25 }
pcnsParallelRedundancyRegainedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsParallelRedundancyRegained 1 }
pcnsParallelRedundancyRegainedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsParallelRedundancyRegained 2 }
pcnsParallelRedundancyRegainedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsParallelRedundancyRegained 3 }
pcnsParallelRedundancyRegainedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsParallelRedundancyRegained 4 }
pcnsParallelRedundancyRegainedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsParallelRedundancyRegained 5 }
pcnsMaxInternalTempExceeded OBJECT IDENTIFIER ::= { pcnsEvents 26 }
pcnsMaxInternalTempExceededDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsMaxInternalTempExceeded 1 }
pcnsMaxInternalTempExceededEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsMaxInternalTempExceeded 2 }
pcnsMaxInternalTempExceededEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsMaxInternalTempExceeded 3 }
pcnsMaxInternalTempExceededCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsMaxInternalTempExceeded 4 }
pcnsMaxInternalTempExceededCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsMaxInternalTempExceeded 5 }
pcnsMaxInternalTempExceededEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsMaxInternalTempExceeded 6 }
pcnsMaxInternalTempExceededShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsMaxInternalTempExceeded 7 }
pcnsMaxInternalTempInRange OBJECT IDENTIFIER ::= { pcnsEvents 27 }
pcnsMaxInternalTempInRangeDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsMaxInternalTempInRange 1 }
pcnsMaxInternalTempInRangeEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsMaxInternalTempInRange 2 }
pcnsMaxInternalTempInRangeEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsMaxInternalTempInRange 3 }
pcnsMaxInternalTempInRangeCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsMaxInternalTempInRange 4 }
pcnsMaxInternalTempInRangeCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsMaxInternalTempInRange 5 }
pcnsMinLoadCapabilityLost OBJECT IDENTIFIER ::= { pcnsEvents 28 }
pcnsMinLoadCapabilityLostDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsMinLoadCapabilityLost 1 }
pcnsMinLoadCapabilityLostEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsMinLoadCapabilityLost 2 }
pcnsMinLoadCapabilityLostEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsMinLoadCapabilityLost 3 }
pcnsMinLoadCapabilityLostCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsMinLoadCapabilityLost 4 }
pcnsMinLoadCapabilityLostCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsMinLoadCapabilityLost 5 }
pcnsMinLoadCapabilityLostEnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsMinLoadCapabilityLost 6 }
pcnsMinLoadCapabilityLostShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsMinLoadCapabilityLost 7 }
pcnsMinLoadCapabilityRegained OBJECT IDENTIFIER ::= { pcnsEvents 29 }
pcnsMinLoadCapabilityRegainedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsMinLoadCapabilityRegained 1 }
pcnsMinLoadCapabilityRegainedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsMinLoadCapabilityRegained 2 }
pcnsMinLoadCapabilityRegainedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsMinLoadCapabilityRegained 3 }
pcnsMinLoadCapabilityRegainedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsMinLoadCapabilityRegained 4 }
pcnsMinLoadCapabilityRegainedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsMinLoadCapabilityRegained 5 }
-- PCNS Environmental Monitoring Card Events
pcnsEnvironmentCommunicationEstablished OBJECT IDENTIFIER ::= { pcnsEvents 30 }
pcnsEnvironmentCommunicationEstablishedDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsEnvironmentCommunicationEstablished 1 }
pcnsEnvironmentCommunicationEstablishedEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsEnvironmentCommunicationEstablished 2 }
pcnsEnvironmentCommunicationEstablishedEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsEnvironmentCommunicationEstablished 3 }
pcnsEnvironmentCommunicationEstablishedCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsEnvironmentCommunicationEstablished 4 }
pcnsEnvironmentCommunicationEstablishedCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsEnvironmentCommunicationEstablished 5 }
pcnsEnvironmentCommunicationLost OBJECT IDENTIFIER ::= { pcnsEvents 31 }
pcnsEnvironmentCommunicationLostDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsEnvironmentCommunicationLost 1 }
pcnsEnvironmentCommunicationLostEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsEnvironmentCommunicationLost 2 }
pcnsEnvironmentCommunicationLostEnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsEnvironmentCommunicationLost 3 }
pcnsEnvironmentCommunicationLostCommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsEnvironmentCommunicationLost 4 }
pcnsEnvironmentCommunicationLostCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsEnvironmentCommunicationLost 5 }
pcnsTempInRangeProbe1 OBJECT IDENTIFIER ::= { pcnsEvents 32 }
pcnsTempInRangeProbe1Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsTempInRangeProbe1 1 }
pcnsTempInRangeProbe1EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsTempInRangeProbe1 2 }
pcnsTempInRangeProbe1EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsTempInRangeProbe1 3 }
pcnsTempInRangeProbe1CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsTempInRangeProbe1 4 }
pcnsTempInRangeProbe1CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsTempInRangeProbe1 5 }
pcnsTempOutOfRangeProbe1 OBJECT IDENTIFIER ::= { pcnsEvents 33 }
pcnsTempOutOfRangeProbe1Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsTempOutOfRangeProbe1 1 }
pcnsTempOutOfRangeProbe1EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsTempOutOfRangeProbe1 2 }
pcnsTempOutOfRangeProbe1EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsTempOutOfRangeProbe1 3 }
pcnsTempOutOfRangeProbe1CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsTempOutOfRangeProbe1 4 }
pcnsTempOutOfRangeProbe1CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsTempOutOfRangeProbe1 5 }
pcnsTempOutOfRangeProbe1EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsTempOutOfRangeProbe1 6 }
pcnsTempOutOfRangeProbe1ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsTempOutOfRangeProbe1 7 }
pcnsHumidityInRangeProbe1 OBJECT IDENTIFIER ::= { pcnsEvents 34 }
pcnsHumidityInRangeProbe1Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsHumidityInRangeProbe1 1 }
pcnsHumidityInRangeProbe1EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsHumidityInRangeProbe1 2 }
pcnsHumidityInRangeProbe1EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsHumidityInRangeProbe1 3 }
pcnsHumidityInRangeProbe1CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsHumidityInRangeProbe1 4 }
pcnsHumidityInRangeProbe1CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsHumidityInRangeProbe1 5 }
pcnsHumidityOutOfRangeProbe1 OBJECT IDENTIFIER ::= { pcnsEvents 35 }
pcnsHumidityOutOfRangeProbe1Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsHumidityOutOfRangeProbe1 1 }
pcnsHumidityOutOfRangeProbe1EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsHumidityOutOfRangeProbe1 2 }
pcnsHumidityOutOfRangeProbe1EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsHumidityOutOfRangeProbe1 3 }
pcnsHumidityOutOfRangeProbe1CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsHumidityOutOfRangeProbe1 4 }
pcnsHumidityOutOfRangeProbe1CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsHumidityOutOfRangeProbe1 5 }
pcnsHumidityOutOfRangeProbe1EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsHumidityOutOfRangeProbe1 6 }
pcnsHumidityOutOfRangeProbe1ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsHumidityOutOfRangeProbe1 7 }
pcnsTempInRangeProbe2 OBJECT IDENTIFIER ::= { pcnsEvents 36 }
pcnsTempInRangeProbe2Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsTempInRangeProbe2 1 }
pcnsTempInRangeProbe2EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsTempInRangeProbe2 2 }
pcnsTempInRangeProbe2EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsTempInRangeProbe2 3 }
pcnsTempInRangeProbe2CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsTempInRangeProbe2 4 }
pcnsTempInRangeProbe2CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsTempInRangeProbe2 5 }
pcnsTempOutOfRangeProbe2 OBJECT IDENTIFIER ::= { pcnsEvents 37 }
pcnsTempOutOfRangeProbe2Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsTempOutOfRangeProbe2 1 }
pcnsTempOutOfRangeProbe2EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsTempOutOfRangeProbe2 2 }
pcnsTempOutOfRangeProbe2EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsTempOutOfRangeProbe2 3 }
pcnsTempOutOfRangeProbe2CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsTempOutOfRangeProbe2 4 }
pcnsTempOutOfRangeProbe2CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsTempOutOfRangeProbe2 5 }
pcnsTempOutOfRangeProbe2EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsTempOutOfRangeProbe2 6 }
pcnsTempOutOfRangeProbe2ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsTempOutOfRangeProbe2 7 }
pcnsHumidityInRangeProbe2 OBJECT IDENTIFIER ::= { pcnsEvents 38 }
pcnsHumidityInRangeProbe2Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsHumidityInRangeProbe2 1 }
pcnsHumidityInRangeProbe2EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsHumidityInRangeProbe2 2 }
pcnsHumidityInRangeProbe2EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsHumidityInRangeProbe2 3 }
pcnsHumidityInRangeProbe2CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsHumidityInRangeProbe2 4 }
pcnsHumidityInRangeProbe2CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsHumidityInRangeProbe2 5 }
pcnsHumidityOutOfRangeProbe2 OBJECT IDENTIFIER ::= { pcnsEvents 39 }
pcnsHumidityOutOfRangeProbe2Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsHumidityOutOfRangeProbe2 1 }
pcnsHumidityOutOfRangeProbe2EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsHumidityOutOfRangeProbe2 2 }
pcnsHumidityOutOfRangeProbe2EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsHumidityOutOfRangeProbe2 3 }
pcnsHumidityOutOfRangeProbe2CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsHumidityOutOfRangeProbe2 4 }
pcnsHumidityOutOfRangeProbe2CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsHumidityOutOfRangeProbe2 5 }
pcnsHumidityOutOfRangeProbe2EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsHumidityOutOfRangeProbe2 6 }
pcnsHumidityOutOfRangeProbe2ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsHumidityOutOfRangeProbe2 7 }
pcnsContactFault1 OBJECT IDENTIFIER ::= { pcnsEvents 40 }
pcnsContactFault1Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactFault1 1 }
pcnsContactFault1EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactFault1 2 }
pcnsContactFault1EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactFault1 3 }
pcnsContactFault1CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactFault1 4 }
pcnsContactFault1CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactFault1 5 }
pcnsContactFault1EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsContactFault1 6 }
pcnsContactFault1ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsContactFault1 7 }
pcnsContactFault2 OBJECT IDENTIFIER ::= { pcnsEvents 41 }
pcnsContactFault2Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactFault2 1 }
pcnsContactFault2EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactFault2 2 }
pcnsContactFault2EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactFault2 3 }
pcnsContactFault2CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactFault2 4 }
pcnsContactFault2CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactFault2 5 }
pcnsContactFault2EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsContactFault2 6 }
pcnsContactFault2ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsContactFault2 7 }
pcnsContactFault3 OBJECT IDENTIFIER ::= { pcnsEvents 42 }
pcnsContactFault3Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactFault3 1 }
pcnsContactFault3EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactFault3 2 }
pcnsContactFault3EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactFault3 3 }
pcnsContactFault3CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactFault3 4 }
pcnsContactFault3CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactFault3 5 }
pcnsContactFault3EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsContactFault3 6 }
pcnsContactFault3ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsContactFault3 7 }
pcnsContactFault4 OBJECT IDENTIFIER ::= { pcnsEvents 43 }
pcnsContactFault4Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactFault4 1 }
pcnsContactFault4EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactFault4 2 }
pcnsContactFault4EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactFault4 3 }
pcnsContactFault4CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactFault4 4 }
pcnsContactFault4CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactFault4 5 }
pcnsContactFault4EnableShutdown OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform a graceful shutdown of the server when this event occurs."
::= { pcnsContactFault4 6 }
pcnsContactFault4ShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before performing a graceful shutdown of the server (seconds)."
::= { pcnsContactFault4 7 }
pcnsContactNormal1 OBJECT IDENTIFIER ::= { pcnsEvents 44 }
pcnsContactNormal1Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactNormal1 1 }
pcnsContactNormal1EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactNormal1 2 }
pcnsContactNormal1EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactNormal1 3 }
pcnsContactNormal1CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactNormal1 4 }
pcnsContactNormal1CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactNormal1 5 }
pcnsContactNormal2 OBJECT IDENTIFIER ::= { pcnsEvents 45 }
pcnsContactNormal2Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactNormal2 1 }
pcnsContactNormal2EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactNormal2 2 }
pcnsContactNormal2EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactNormal2 3 }
pcnsContactNormal2CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactNormal2 4 }
pcnsContactNormal2CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactNormal2 5 }
pcnsContactNormal3 OBJECT IDENTIFIER ::= { pcnsEvents 46 }
pcnsContactNormal3Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactNormal3 1 }
pcnsContactNormal3EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactNormal3 2 }
pcnsContactNormal3EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactNormal3 3 }
pcnsContactNormal3CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactNormal3 4 }
pcnsContactNormal3CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactNormal3 5 }
pcnsContactNormal4 OBJECT IDENTIFIER ::= { pcnsEvents 47 }
pcnsContactNormal4Desc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the event."
::= { pcnsContactNormal4 1 }
pcnsContactNormal4EnableLogging OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log occurrences of this event in PCNS log."
::= { pcnsContactNormal4 2 }
pcnsContactNormal4EnableCommandFile OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Execute a command file when this event occurs."
::= { pcnsContactNormal4 3 }
pcnsContactNormal4CommandFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Path of command file to execute when this event occurs."
::= { pcnsContactNormal4 4 }
pcnsContactNormal4CommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long to wait after event occurs before executing command file (seconds)."
::= { pcnsContactNormal4 5 }
-- the software group
-- the powerChuteNetworkShutdown group
-- the pcnsShutdown group
pcnsShutdownCommandFileEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Run a shutdown command file before performing graceful shutdown."
::= { pcnsShutdown 1 }
pcnsShutdownCommandFileDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long in seconds to wait before running a shutdown command file before graceful shutdown."
::= { pcnsShutdown 2 }
pcnsShutdownCommandFile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Full name of the shutdown command file to run before graceful shutdown."
::= { pcnsShutdown 3 }
pcnsShutdownCommandFileDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long in seconds shutdown command file takes to run."
::= { pcnsShutdown 4 }
pcnsTurnOffUps OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turn off the UPS when performing a graceful shutdown."
::= { pcnsShutdown 5 }
pcnsTurnOffSOG OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turn off the Outlet Group on the UPS when performing a graceful shutdown."
::= { pcnsShutdown 6 }
pcnsRuntimeRemainingThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This defines a threshold for runtime remaining. When the
UPS is running on battery power and the runtime remaining
on the UPS drops below the threshold, PowerChute will trigger
a shutdown sequence."
::= { pcnsShutdown 7 }
pcnsRuntimeRemainingCmdFileThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This defines a threshold for runtime remaining. When
runtime remaining drops below this threshold, PowerChute
will execute the command file."
::= { pcnsShutdown 8 }
pcnsAdvancedShutdownTable OBJECT-TYPE
SYNTAX SEQUENCE OF PCNSAdvancedShutdownEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Network Management Cards in the UPS's which PCNS is monitoring to provide safe shutdown."
::= { pcnsShutdown 9 }
pcnsAdvancedShutdownEntry OBJECT-TYPE
SYNTAX PCNSAdvancedShutdownEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Details of the NMC."
INDEX { pcnsAdvancedGroupNo }
::= { pcnsAdvancedShutdownTable 1 }
PCNSAdvancedShutdownEntry ::=
SEQUENCE {
pcnsAdvancedGroupNo Gauge,
pcnsAdvancedGroupName DisplayString,
pcnsAdvancedGroupNMC DisplayString,
pcnsAdvancedShutdownUPSRequiredForLoad INTEGER,
pcnsAdvancedShutdownCommandFileEnabled INTEGER,
pcnsAdvancedShutdownCommandFile DisplayString,
pcnsAdvancedShutdownCommandFileDuration INTEGER,
pcnsAdvancedShutdownPowerchuteServer INTEGER,
pcnsAdvancedShutdownOnLostRedundancy INTEGER,
pcnsAdvancedTurnOffUps INTEGER,
pcnsAdvancedTurnOffSOG INTEGER
}
pcnsAdvancedGroupNo OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the Advanced Shutdown Group."
::= { pcnsAdvancedShutdownEntry 1 }
pcnsAdvancedGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of the Advanced Shutdown Group."
::= { pcnsAdvancedShutdownEntry 2 }
pcnsAdvancedGroupNMC OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"List of NMCs in the Advanced Shutdown Group."
::= { pcnsAdvancedShutdownEntry 3 }
pcnsAdvancedShutdownUPSRequiredForLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of UPS's required to power load."
::= { pcnsAdvancedShutdownEntry 4 }
pcnsAdvancedShutdownCommandFileEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Run a shutdown command file before performing graceful shutdown."
::= { pcnsAdvancedShutdownEntry 5 }
pcnsAdvancedShutdownCommandFile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Full name of the shutdown command file to run before graceful shutdown."
::= { pcnsAdvancedShutdownEntry 6 }
pcnsAdvancedShutdownCommandFileDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How long in seconds shutdown command file takes to run."
::= { pcnsAdvancedShutdownEntry 7 }
pcnsAdvancedShutdownPowerchuteServer OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shut down PowerChute Server."
::= { pcnsAdvancedShutdownEntry 8 }
pcnsAdvancedShutdownOnLostRedundancy OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shut down if Redundancy lost."
::= { pcnsAdvancedShutdownEntry 9 }
pcnsAdvancedTurnOffUps OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turn off the UPS when performing a graceful shutdown."
::= { pcnsAdvancedShutdownEntry 10 }
pcnsAdvancedTurnOffSOG OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turn off the Outlet Group on the UPS when performing a graceful shutdown."
::= { pcnsAdvancedShutdownEntry 11 }
-- the software group
-- the powerChuteNetworkShutdown group
-- the pcnsAlarms group
pcnsCriticalFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PowerChute Network Shutdown has begun a safe shutdown of the host."
::= { pcnsAlarms 1 }
pcnsCriticalCause OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The reason PowerChute Network Shutdown has begun a safe shutdown."
::= { pcnsAlarms 2 }
pcnsNetComsLostFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PowerChute cannot communicate with NMC."
::= { pcnsAlarms 3 }
pcnsNMCComsLostFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"NMC cannot communicate with UPS."
::= { pcnsAlarms 4 }
pcnsUpdateAvailableFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PowerChute has detected that a newer version is available."
::= { pcnsAlarms 5 }
pcnsUpdateDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Details of the newer version of PowerChute."
::= { pcnsAlarms 6 }
-- the software group
-- the powerChuteBusinessEdition group
-- the pcbeIdent group
pcbeHostname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hostname of the PCBE instance."
::= { pcbeIdent 1 }
pcbeVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of PCBE installed. x.x.x"
::= { pcbeIdent 2 }
pcbeOS OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of OS PCBE is installed on."
::= { pcbeIdent 3 }
pcbeJavaVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of Java PCBE is running on."
::= { pcbeIdent 4 }
pcbeUIProtocol OBJECT-TYPE
SYNTAX INTEGER {
http(1),
https(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Protocol used to connect to the PCBE UI."
::= { pcbeIdent 5 }
pcbeHttpPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port used for PCBE http UI."
::= { pcbeIdent 6 }
pcbeHttpsPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port used for PCBE https UI."
::= { pcbeIdent 7 }
-- the software group
-- the powerChuteBusinessEdition group
-- the pcbeAlarms group
pcbeCriticalFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PowerChute Business Edition has begun a safe shutdown of the host."
::= { pcbeAlarms 1 }
pcbeCriticalCause OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The reason PowerChute Business Edition has begun a safe shutdown."
::= { pcbeAlarms 2 }
pcbeComsLostFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If active (1), PowerChute cannot communicate with UPS"
::= { pcbeAlarms 3 }
-- pcbeAlarms 4 is deliberately skipped to make this consistent with PCNS
pcbeUpdateAvailableFlag OBJECT-TYPE
SYNTAX INTEGER {
active (1),
clear (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PowerChute has detected that a newer version is available."
::= { pcbeAlarms 5 }
pcbeUpdateDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Details of the newer version of PowerChute."
::= { pcbeAlarms 6 }
-- the ups group
-- the upsIdent group
-- the upsBasicIdent
upsBasicIdentModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS model name (e.g. 'APC Smart-UPS 600')."
::= { upsBasicIdent 1 }
upsBasicIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An 8 byte ID string identifying the UPS. This object
can be set by the administrator. For GVS, GPX and GVL products, this string can be up to 32 bytes."
::= { upsBasicIdent 2 }
upsBasicIdentFamilyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS model family name for the product."
::= { upsBasicIdent 3 }
upsBasicIdentModelType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The detailed model information of the system."
::= { upsBasicIdent 4 }
-- the upsAdvIdent group
upsAdvIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the UPS system's microprocessor."
::= { upsAdvIdent 1 }
upsAdvIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the UPS was manufactured in mm/dd/yy (or yyyy) format."
::= { upsAdvIdent 2 }
upsAdvIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An 8-character string (12-character in case of
3 phase UPS) identifying the serial number of
the UPS internal microprocessor. This number is set at
the factory. NOTE: This number does NOT correspond to
the serial number on the rear of the UPS."
::= { upsAdvIdent 3 }
upsAdvIdentFirmwareRevision2 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of a UPS system co-microprocessor."
::= { upsAdvIdent 4 }
upsAdvIdentSkuNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SKU number of a UPS system."
::= { upsAdvIdent 5 }
upsAdvIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of a UPS system."
::= { upsAdvIdent 6 }
upsAdvIdentUpsPhaseConfigType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
threePhaseInOut(2),
onePhaseInOut(3),
threePhaseInOneOut(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type definition, based on phase configuration.
1 - Unknown
2 - 3 phase in/out
3 - 1 phase in/out
4 - 3 phase in/1 phase out"
::= { upsAdvIdent 7 }
upsAdvEnergyStorageType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
vrlaOrWetCells(2),
niCdBatteries(3),
liIonBatteries(4),
noEnergyStorage(5),
flywheel(6),
ultracaps(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The energy storage type connected to the UPS. It states battery type and battery chemistry.
1 - Unknown
2 - VRLA or wet cells
3 - NiCd batteries
4 - Lithium-ion batteries
5 - No energy storage
6 - Flywheel
7 - Ultracaps"
::= { upsAdvIdent 8 }
-- the upsBattery group
-- the upsBasicBattery group
upsBasicBatteryStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
batteryNormal(2),
batteryLow(3),
batteryInFaultCondition(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the UPS batteries. A batteryLow(3) value
indicates the UPS will be unable to sustain the current
load, and its services will be lost if power is not restored.
The amount of run time in reserve at the time of low battery
can be configured by the upsAdvConfigLowBatteryRunTime.
A batteryInFaultCondition(4)value indicates that a battery
installed has an internal error condition."
::= { upsBasicBattery 1 }
upsBasicBatteryTimeOnBattery OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The elapsed time since the UPS has switched to battery
power."
::= { upsBasicBattery 2 }
upsBasicBatteryLastReplaceDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The date when the UPS system's batteries were last replaced
in mm/dd/yy (or yyyy) format. For Smart-UPS models, this value
is originally set in the factory. When the UPS batteries
are replaced, this value should be reset by the administrator.
For Symmetra PX 250/500 this OID is read only and is configurable in the local display only."
::= { upsBasicBattery 3 }
-- the upsAdvBattery group
upsAdvBatteryCapacity OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remaining battery capacity expressed in
percent of full capacity."
::= { upsAdvBattery 1 }
upsAdvBatteryTemperature OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current internal UPS temperature expressed in
Celsius. Temperatures below zero read as 0.
Consider using upsHighPrecExtdBatteryTemperature instead."
::= { upsAdvBattery 2 }
upsAdvBatteryRunTimeRemaining OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS battery run time remaining before battery
exhaustion."
::= { upsAdvBattery 3 }
upsAdvBatteryReplaceIndicator OBJECT-TYPE
SYNTAX INTEGER {
noBatteryNeedsReplacing(1),
batteryNeedsReplacing(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the UPS batteries need replacing."
::= { upsAdvBattery 4 }
upsAdvBatteryNumOfBattPacks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of external battery packs connected to the UPS. If
the UPS does not use smart cells then the agent reports
ERROR_NO_SUCH_NAME."
::= { upsAdvBattery 5 }
upsAdvBatteryNumOfBadBattPacks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of external battery packs connected to the UPS that
are defective. If the UPS does not use smart cells then the
agent reports ERROR_NO_SUCH_NAME."
::= { upsAdvBattery 6 }
upsAdvBatteryNominalVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal battery voltage in Volts."
::= { upsAdvBattery 7 }
upsAdvBatteryActualVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual battery bus voltage in Volts."
::= { upsAdvBattery 8 }
upsAdvBatteryCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery current in Amps."
::= { upsAdvBattery 9 }
upsAdvTotalDCCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total DC current in Amps."
::= { upsAdvBattery 10 }
upsAdvBatteryFullCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The full chargeable capacity of the battery which is
expressed in percentage."
::= { upsAdvBattery 11 }
-- Advanced Battery Voltage Table
upsAdvBatteryActualVoltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSAdvBatteryActualVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of battery table entries. The number of battery
frames present in UPS."
::= { upsAdvBattery 12 }
upsAdvBatteryActualVoltageEntry OBJECT-TYPE
SYNTAX UPSAdvBatteryActualVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information applicable to
each of the Battery frames."
INDEX { upsAdvBatteryActualVoltageTableIndex }
::= { upsAdvBatteryActualVoltageTable 1 }
UPSAdvBatteryActualVoltageEntry ::= SEQUENCE {
upsAdvBatteryActualVoltageTableIndex INTEGER,
upsAdvBatteryActualVoltagePolarity INTEGER,
upsAdvBatteryFrameActualVoltage INTEGER
}
upsAdvBatteryActualVoltageTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery Frame identifier. Battery Frame index."
::= { upsAdvBatteryActualVoltageEntry 1 }
upsAdvBatteryActualVoltagePolarity OBJECT-TYPE
SYNTAX INTEGER {
positive (0),
negative (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selected Battery Voltage Polarity.
0 indicates positive polarity.
1 indicates negative polarity."
::= { upsAdvBatteryActualVoltageEntry 2 }
upsAdvBatteryFrameActualVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual battery bus voltage in Volts."
::= { upsAdvBatteryActualVoltageEntry 3 }
-- Advanced TotalDC Current Table
upsAdvTotalDCCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSAdvTotalDCCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery Frame table entries. The number of entries
is given by the value of Number of Battery Frames."
::= { upsAdvBattery 13 }
upsAdvTotalDCCurrentEntry OBJECT-TYPE
SYNTAX UPSAdvTotalDCCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular Battery Frame."
INDEX { upsAdvTotalDCCurrentTableIndex }
::= { upsAdvTotalDCCurrentTable 1 }
UPSAdvTotalDCCurrentEntry ::= SEQUENCE {
upsAdvTotalDCCurrentTableIndex INTEGER,
upsAdvTotalDCCurrentPolarity INTEGER,
upsAdvTotalFrameDCCurrent INTEGER
}
upsAdvTotalDCCurrentTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery Frame identifier. Total DC Current
Table Index."
::= { upsAdvTotalDCCurrentEntry 1 }
upsAdvTotalDCCurrentPolarity OBJECT-TYPE
SYNTAX INTEGER {
positive (0),
negative (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selected Battery Current Polarity.
0 indicates positive polarity.
1 indicates negative polarity."
::= { upsAdvTotalDCCurrentEntry 2 }
upsAdvTotalFrameDCCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Total DC Current of battery in Amperes."
::= { upsAdvTotalDCCurrentEntry 3 }
-- Advanced Battery Current Table
upsAdvBatteryCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSAdvBatteryCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery Frame table entries. The number of entries
is given by number of Battery frames present."
::= { upsAdvBattery 14 }
upsAdvBatteryCurrentEntry OBJECT-TYPE
SYNTAX UPSAdvBatteryCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular battery frame."
INDEX { upsAdvBatteryCurrentTableIndex, upsAdvBatteryCurrentIndex }
::= { upsAdvBatteryCurrentTable 1 }
UPSAdvBatteryCurrentEntry ::= SEQUENCE {
upsAdvBatteryCurrentTableIndex INTEGER,
upsAdvBatteryCurrentIndex INTEGER,
upsAdvBatteryCurrentPolarity INTEGER,
upsAdvBatteryFrameCurrent INTEGER
}
upsAdvBatteryCurrentTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery Frame identifier. Battery Current
Table Index."
::= { upsAdvBatteryCurrentEntry 1 }
upsAdvBatteryCurrentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery frame identifier."
::= { upsAdvBatteryCurrentEntry 2 }
upsAdvBatteryCurrentPolarity OBJECT-TYPE
SYNTAX INTEGER {
positive (0),
negative (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selected Battery current polarity.
0 indicates positive polarity.
1 indicates negative polarity"
::= { upsAdvBatteryCurrentEntry 3 }
upsAdvBatteryFrameCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery current measured in Amperes"
::= { upsAdvBatteryCurrentEntry 4 }
upsAdvBatteryEstimatedChargeTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The estimated remaining time required to charge the UPS to a full state of charge."
::= { upsAdvBattery 15 }
upsAdvBatteryPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The measured battery power in kW."
::= { upsAdvBattery 16 }
upsAdvBatteryChargerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
inFaultCondition(3),
floatCharging(4),
boostCharging(5),
resting(6),
notCharging(7),
equalizationCharging(8),
testInProgress(9),
cyclicFloatCharging(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the battery charger. If the UPS is unable
to find the state of charger, this variable is set to unknown(1)."
::= { upsAdvBattery 17 }
upsAdvBatteryInternalSKU OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SKU of the internal battery."
::= { upsAdvBattery 19 }
upsAdvBatteryExternalSKU OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SKU of the external battery."
::= { upsAdvBattery 20 }
upsAdvBatteryRecommendedReplaceDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The recommended replacement date for the battery based on the UPS internal battery life algorithm."
::= { upsAdvBattery 21 }
upsAdvBatteryNominalBackupTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the runtime of the user supplied battery in minutes, when battery is new."
::= { upsAdvBattery 22 }
upsAdvBatteryCondition OBJECT-TYPE
SYNTAX INTEGER{
unknown(1),
ok(2),
weak(3),
poor(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Health of the battries based on the battery test."
::= { upsAdvBattery 23 }
upsAdvBatteryChargingCurrentRestricted OBJECT-TYPE
SYNTAX INTEGER{
yes (1),
no (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether battery charging current is restricted or not.
The value of yes(1) indicates that battery charging current is restricted .
The value of no(2) indicates that battery charging current is not restricted."
::= { upsAdvBattery 24 }
upsAdvBatteryTotalCapacity OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual available battery capacity of the system expressed in ampere hours (Ah).
The value is updated continuously, for example when battery breakers are opened or closed,
or when battery strings/battery blocks are added or removed."
::= { upsAdvBattery 25 }
upsAdvBatteryFuseStatus OBJECT-TYPE
SYNTAX INTEGER {
fuseOpen(1),
fuseOk(2),
notPresent(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If battery system has one common fuse for the battery system, the status is given by this value.
1 = Fuse Open
2 = Fuse Ok
3 = Not present"
::= { upsAdvBattery 26 }
upsAdvBatteryBreakerStatus OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
closed(2),
notPresent(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value indicates the aggregated status of the battery breakers in the system.
disconnected(1) indicates none of the battery breakers are closed, and the battery system is disconnected
closed(2) indicates at least one of the battery breakers in the system is closed
notPresent(3) if not present"
::= { upsAdvBattery 27 }
upsAdvBatteryWiringConfiguration OBJECT-TYPE
SYNTAX INTEGER {
twoWire(1),
threeWire(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value indicates the wiring configuration, whether the battery is 2-wire or 3-wire.
If it's a 3-wire battery system, the system can have 2 voltages and currents per cabinet.
1 = 2-wire (a non-split battery)
2 = 3-wire (a split battery)"
::= { upsAdvBattery 28 }
-- the upsHighPrecBattery group
upsHighPrecBatteryCapacity OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remaining battery capacity expressed in
tenths of percent of full capacity."
::= { upsHighPrecBattery 1 }
upsHighPrecBatteryTemperature OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current internal UPS temperature expressed in
tenths of degrees Celsius. Temperatures below zero
read as 0.
Consider using upsHighPrecExtdBatteryTemperature instead."
::= { upsHighPrecBattery 2 }
upsHighPrecBatteryNominalVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal battery voltage in tenths of Volts."
::= { upsHighPrecBattery 3 }
upsHighPrecBatteryActualVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual battery bus voltage in tenths of Volts."
::= { upsHighPrecBattery 4 }
upsHighPrecBatteryCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery current in tenths of Amps."
::= { upsHighPrecBattery 5 }
upsHighPrecTotalDCCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total DC current in tenths of Amps."
::= { upsHighPrecBattery 6 }
-- High Precision Actual Battery Voltage Table
upsHighPrecBatteryActualVoltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSHighPrecBatteryActualVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery frame table entries. The number of entries
is given by the number of Battery frames."
::= { upsHighPrecBattery 7 }
upsHighPrecBatteryActualVoltageEntry OBJECT-TYPE
SYNTAX UPSHighPrecBatteryActualVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular battery frame."
INDEX { upsHighPrecBatteryActualVoltageTableIndex }
::= { upsHighPrecBatteryActualVoltageTable 1 }
UPSHighPrecBatteryActualVoltageEntry ::= SEQUENCE {
upsHighPrecBatteryActualVoltageTableIndex INTEGER,
upsHighPrecBatteryActualVoltagePolarity INTEGER,
upsHighPrecBatteryVoltage INTEGER
}
upsHighPrecBatteryActualVoltageTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery Frame identifier. High Precision
Actual Voltage Table Index."
::= { upsHighPrecBatteryActualVoltageEntry 1 }
upsHighPrecBatteryActualVoltagePolarity OBJECT-TYPE
SYNTAX INTEGER {
positive (0),
negative (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selected Battery Voltage polarity.
0 indicates positive polarity.
1 indicates negative polarity."
::= { upsHighPrecBatteryActualVoltageEntry 2 }
upsHighPrecBatteryVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual battery bus voltage expressed
as tenths of Volts. "
::= { upsHighPrecBatteryActualVoltageEntry 3 }
-- High Precision Total DC Current Table
upsHighPrecTotalDCCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSHighPrecTotalDCCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery Frame table entries. The number of entries
is given by the number of battery frames."
::= { upsHighPrecBattery 8 }
upsHighPrecTotalDCCurrentEntry OBJECT-TYPE
SYNTAX UPSHighPrecTotalDCCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular battery frame."
INDEX { upsHighPrecTotalDCCurrentTableIndex }
::= { upsHighPrecTotalDCCurrentTable 1 }
UPSHighPrecTotalDCCurrentEntry ::= SEQUENCE {
upsHighPrecTotalDCCurrentTableIndex INTEGER,
upsHighPrecTotalDCCurrentPolarity INTEGER,
upsHighPrecTotalDCFrameCurrent INTEGER
}
upsHighPrecTotalDCCurrentTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery Frame identifier.
High precision Total DC Current index."
::= { upsHighPrecTotalDCCurrentEntry 1 }
upsHighPrecTotalDCCurrentPolarity OBJECT-TYPE
SYNTAX INTEGER {
positive (0),
negative (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selected Battery Current polarity.
0 indicates positive polarity.
1 indicates negative polarity."
::= { upsHighPrecTotalDCCurrentEntry 2 }
upsHighPrecTotalDCFrameCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total DC current in tenths of Amperes. "
::= { upsHighPrecTotalDCCurrentEntry 3 }
-- HighPrec Battery Current Table
upsHighPrecBatteryCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSHighPrecBatteryCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery Frame table entries. The number of entries
is given by the number of battery frames."
::= { upsHighPrecBattery 9 }
upsHighPrecBatteryCurrentEntry OBJECT-TYPE
SYNTAX UPSHighPrecBatteryCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular battery frame."
INDEX { upsHighPrecBatteryCurrentTableIndex, upsHighPrecBatteryCurrentIndex }
::= { upsHighPrecBatteryCurrentTable 1 }
UPSHighPrecBatteryCurrentEntry ::= SEQUENCE {
upsHighPrecBatteryCurrentTableIndex INTEGER,
upsHighPrecBatteryCurrentIndex INTEGER,
upsHighPrecBatteryCurrentPolarity INTEGER,
upsHighPrecBatteryFrameCurrent INTEGER
}
upsHighPrecBatteryCurrentTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery frame identifier.
Battery Frame index."
::= { upsHighPrecBatteryCurrentEntry 1 }
upsHighPrecBatteryCurrentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery frame identifier.
Battery Index for each frame."
::= { upsHighPrecBatteryCurrentEntry 2 }
upsHighPrecBatteryCurrentPolarity OBJECT-TYPE
SYNTAX INTEGER {
positive (0),
negative (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selected Battery Current polarity.
0 indicates positive polarity.
1 indicates negative polarity."
::= { upsHighPrecBatteryCurrentEntry 3 }
upsHighPrecBatteryFrameCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Battery current in tenths of Amperes."
::= { upsHighPrecBatteryCurrentEntry 4 }
-- High Precision Battery Packs
upsHighPrecBatteryPacks OBJECT IDENTIFIER ::= { upsHighPrecBattery 10 }
upsHighPrecBatteryPackTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the upsHighPrecBatteryPacks."
::= { upsHighPrecBatteryPacks 1 }
upsHighPrecBatteryPackTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSHighPrecBatteryPackEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery Pack table entries. The number of entries
is given by number of Battery Packs present."
::= { upsHighPrecBatteryPacks 2 }
upsHighPrecBatteryPackEntry OBJECT-TYPE
SYNTAX UPSHighPrecBatteryPackEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular battery pack."
INDEX { upsHighPrecBatteryPackIndex, upsHighPrecBatteryCartridgeIndex }
::= { upsHighPrecBatteryPackTable 1 }
UPSHighPrecBatteryPackEntry ::= SEQUENCE {
upsHighPrecBatteryPackIndex INTEGER,
upsHighPrecBatteryCartridgeIndex INTEGER,
upsHighPrecBatteryPackFirmwareRevision DisplayString,
upsHighPrecBatteryPackSerialNumber DisplayString,
upsHighPrecBatteryPackTemperature INTEGER,
upsHighPrecBatteryPackStatus OCTET STRING,
upsHighPrecBatteryPackCartridgeHealth OCTET STRING,
upsHighPrecBatteryPackCartridgeReplaceDate DisplayString,
upsHighPrecBatteryPackCartridgeInstallDate DisplayString,
upsHighPrecBatteryPackCartridgeStatus OCTET STRING
}
upsHighPrecBatteryPackIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack identifier."
::= { upsHighPrecBatteryPackEntry 1 }
upsHighPrecBatteryCartridgeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery cartridge identifier."
::= { upsHighPrecBatteryPackEntry 2 }
upsHighPrecBatteryPackFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack firmware revision."
::= { upsHighPrecBatteryPackEntry 3}
upsHighPrecBatteryPackSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack serial number."
::= { upsHighPrecBatteryPackEntry 4}
upsHighPrecBatteryPackTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack temperature measured in 10ths of degree Celcius"
::= { upsHighPrecBatteryPackEntry 5 }
upsHighPrecBatteryPackStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery status for the pack only.
bit 0 Disconnected
bit 1 Overvoltage
bit 2 NeedsReplacement
bit 3 OvertemperatureCritical
bit 4 Charger
bit 5 TemperatureSensor
bit 6 BusSoftStart
bit 7 OvertemperatureWarning
bit 8 GeneralError
bit 9 Communication
bit 10 DisconnectedFrame
bit 11 FirmwareMismatch
"
::= { upsHighPrecBatteryPackEntry 6 }
upsHighPrecBatteryPackCartridgeHealth OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery cartridge health.
bit 0 Battery lifetime okay
bit 1 Battery lifetime near end, order replacement cartridge
bit 2 Battery lifetime exceeded, replace battery
bit 3 Battery lifetime near end acknowledged, order replacement cartridge
bit 4 Battery lifetime exceeded acknowledged, replace battery
bit 5 Battery measured lifetime near end, order replacement cartridge
bit 6 Battery measured lifetime near end acknowledged, order replacement cartridge
"
::= { upsHighPrecBatteryPackEntry 7}
upsHighPrecBatteryPackCartridgeReplaceDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery cartridge estimated battery replace date."
::= { upsHighPrecBatteryPackEntry 8 }
upsHighPrecBatteryPackCartridgeInstallDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The battery cartridge install date."
::= { upsHighPrecBatteryPackEntry 9 }
upsHighPrecBatteryPackCartridgeStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery cartridge status.
bit 0 Disconnected
bit 1 Overvoltage
bit 2 NeedsReplacement
bit 3 OvertemperatureCritical
bit 4 Charger
bit 5 TemperatureSensor
bit 6 BusSoftStart
bit 7 OvertemperatureWarning
bit 8 GeneralError
bit 9 Communication
bit 10 DisconnectedFrame
bit 11 FirmwareMismatch
"
::= { upsHighPrecBatteryPackEntry 10 }
upsHighPrecBatteryPackOnlyTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the upsHighPrecBatteryPacks."
::= { upsHighPrecBatteryPacks 3 }
upsHighPrecBatteryPackOnlyTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSHighPrecBatteryPackOnlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Battery Pack table entries. The number of entries
is given by number of Battery Packs present."
::= { upsHighPrecBatteryPacks 4 }
upsHighPrecBatteryPackOnlyEntry OBJECT-TYPE
SYNTAX UPSHighPrecBatteryPackOnlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular battery pack."
INDEX { upsHighPrecBatteryPackOnlyIndex }
::= { upsHighPrecBatteryPackOnlyTable 1 }
UPSHighPrecBatteryPackOnlyEntry ::= SEQUENCE {
upsHighPrecBatteryPackOnlyIndex INTEGER,
upsHighPrecBatteryPackOnlyFirmwareRevision DisplayString,
upsHighPrecBatteryPackOnlySerialNumber DisplayString,
upsHighPrecBatteryPackOnlyTemperature INTEGER,
upsHighPrecBatteryPackOnlyStatus OCTET STRING,
upsHighPrecBatteryPackOnlyHealth OCTET STRING,
upsHighPrecBatteryPackOnlyReplaceDate DisplayString,
upsHighPrecBatteryPackOnlyInstallDate DisplayString
}
upsHighPrecBatteryPackOnlyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack identifier."
::= { upsHighPrecBatteryPackOnlyEntry 1 }
upsHighPrecBatteryPackOnlyFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack firmware revision."
::= { upsHighPrecBatteryPackOnlyEntry 2}
upsHighPrecBatteryPackOnlySerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack serial number."
::= { upsHighPrecBatteryPackOnlyEntry 3}
upsHighPrecBatteryPackOnlyTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack temperature measured in 10ths of degree Celcius"
::= { upsHighPrecBatteryPackOnlyEntry 4 }
upsHighPrecBatteryPackOnlyStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery status for the pack only.
bit 0 Disconnected
bit 1 Overvoltage
bit 2 NeedsReplacement
bit 3 OvertemperatureCritical
bit 4 Charger
bit 5 TemperatureSensor
bit 6 BusSoftStart
bit 7 OvertemperatureWarning
bit 8 GeneralError
bit 9 Communication
bit 10 DisconnectedFrame
bit 11 FirmwareMismatch
"
::= { upsHighPrecBatteryPackOnlyEntry 5 }
upsHighPrecBatteryPackOnlyHealth OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack health.
bit 0 Battery lifetime okay
bit 1 Battery lifetime near end, order replacement pack
bit 2 Battery lifetime exceeded, replace battery
bit 3 Battery lifetime near end acknowledged, order replacement pack
bit 4 Battery lifetime exceeded acknowledged, replace battery
bit 5 Battery measured lifetime near end, order replacement pack
bit 6 Battery measured lifetime near end acknowledged, order replacement pack
"
::= { upsHighPrecBatteryPackOnlyEntry 6 }
upsHighPrecBatteryPackOnlyReplaceDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery pack estimated battery replace date."
::= { upsHighPrecBatteryPackOnlyEntry 7 }
upsHighPrecBatteryPackOnlyInstallDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The battery pack install date."
::= { upsHighPrecBatteryPackOnlyEntry 8 }
-- end of High Precision Battery Packs
upsHighPrecBatteryHealth OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery health.
Bit 0 Battery life okay
Bit 1 Battery life near end, order battery cartridge
Bit 2 Battery life exceeded, replace battery cartridge
Bit 3 Battery life near end acknowledged, order battery
cartridge
Bit 4 Battery life exceeded acknowledged, replace battery
cartridge
Bit 5 Battery measured life near end, order battery cartridge
Bit 6 Battery measured life near end acknowledged, order
battery cartridge"
::= { upsHighPrecBattery 11}
upsHighPrecActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Active Power of Battery in tenths of kW"
::= { upsHighPrecBattery 12 }
upsHighPrecExtdBatteryTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current internal UPS temperature expressed in
tenths of degrees Celsius. Can be negative."
::= { upsHighPrecBattery 13 }
upsBatteryNumberOfCabinets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value indicates the number of battery cabinets in total, internal and external.
If the UPS only has internal batteries, that number should be 1.
If the UPS has external and internal, the number is 1 + number of external cabinets."
::= { upsBattery 4 }
-- Battery Cabinet Table
upsBatteryCabinetTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSBatteryCabinetEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"Table of battery cabinets"
::= { upsBattery 5 }
upsBatteryCabinetEntry OBJECT-TYPE
SYNTAX UPSBatteryCabinetEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"An entry containing information applicable to a
particular battery cabinet."
INDEX { upsBatteryCabinetIndex }
::= { upsBatteryCabinetTable 1 }
UPSBatteryCabinetEntry ::= SEQUENCE {
upsBatteryCabinetIndex INTEGER,
upsBatteryCabinetLocalIndex INTEGER,
upsBatteryCabinetWiringConfiguration INTEGER,
upsBatteryCabinetVoltagePolarity1 INTEGER,
upsBatteryCabinetVoltagePolarity2 INTEGER,
upsBatteryCabinetCurrentPolarity1 INTEGER,
upsBatteryCabinetCurrentPolarity2 INTEGER,
upsBatteryCabinetTemperature INTEGER,
upsBatteryCabinetMaxTemperature INTEGER,
upsBatteryCabinetMinTemperature INTEGER,
upsBatteryCabinetAverageTemperature INTEGER,
upsBatteryCabinetFuse INTEGER,
upsBatteryCabinetBreaker INTEGER,
upsBatteryCabinetNumberOfStrings INTEGER,
upsBatteryCabinetNumberOfVerticalPositions INTEGER,
upsBatteryCabinetNumberOfHorizontalPositions INTEGER
}
upsBatteryCabinetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The Battery Cabinet identifier. Battery Cabinet
Table Index."
::= { upsBatteryCabinetEntry 1 }
upsBatteryCabinetLocalIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The identification number for the actual battery cabinet in the system.
0 corresponds to the internal batteries
1 and higher corresponds to external battery cabinets"
::= { upsBatteryCabinetEntry 2 }
upsBatteryCabinetWiringConfiguration OBJECT-TYPE
SYNTAX INTEGER {
twoWire(1),
threeWire(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The value indicates the wiring configuration, whether the battery is 2-wire or 3-wire.
If it's a 3-wire battery system, the system can have two voltages and currents per cabinet.
1 = 2-wire (a non-split battery)
2 = 3-wire (a split battery)"
::= { upsBatteryCabinetEntry 3 }
upsBatteryCabinetVoltagePolarity1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The battery voltage. For a non-split battery, it is the full voltage.
For a split battery, the value is the voltage for one side/half of the battery"
::= { upsBatteryCabinetEntry 4 }
upsBatteryCabinetVoltagePolarity2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The voltage for the second side/half of the battery in a split battery system.
If it is not a split battery, this reports -1"
::= { upsBatteryCabinetEntry 5 }
upsBatteryCabinetCurrentPolarity1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The battery current. For a non-split battery, it is the full current.
For a split battery, the value is the current for one side/half of the battery"
::= { upsBatteryCabinetEntry 6 }
upsBatteryCabinetCurrentPolarity2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The current for the second side/half of the battery in a split battery system.
If it is not a split battery, this reports -1"
::= { upsBatteryCabinetEntry 7 }
upsBatteryCabinetTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The measured temperature of the battery cabinet in tenths of degrees Celcius"
::= { upsBatteryCabinetEntry 8 }
upsBatteryCabinetMaxTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest temperature measured for the battery in the battery cabinet in tenths of degrees Celcius.
If there are multiple sensors in the battery cabinet, it is the selected highest actual value
of measured temperatures.
If there is battery string information, it is the highest actual battery string temperature value."
::= { upsBatteryCabinetEntry 9 }
upsBatteryCabinetMinTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The lowest temperature measured for the battery in the battery cabinet in tenths of degrees Celcius.
If there are multiple sensors in the battery cabinet, it is the selected lowest actual value
of measured temperatures.
If there is string information, it is the lowest actual battery string temperature value."
::= { upsBatteryCabinetEntry 10 }
upsBatteryCabinetAverageTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The average temperature for all the battery sensors in the battery cabinet and
for the battery strings, if battery strings are present.
Measured in tenths of degrees Celcius."
::= { upsBatteryCabinetEntry 11 }
upsBatteryCabinetFuse OBJECT-TYPE
SYNTAX INTEGER {
fuseOpen(1),
fuseOk(2),
notPresent(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"If the battery cabinet has a common fuse, the status is given by this value.
1 = Fuse open
2 = Fuse OK
3 = Not present"
::= { upsBatteryCabinetEntry 12 }
upsBatteryCabinetBreaker OBJECT-TYPE
SYNTAX INTEGER {
noBreaker(1),
unknown(2),
breakerOpen(3),
breakerClosed(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The value indicates the battery cabinet breaker status. Reports 1 if no breaker is present.
1 = No breaker
2 = Unknown
3 = Breaker open
4 = Breaker closed"
::= { upsBatteryCabinetEntry 13 }
upsBatteryCabinetNumberOfStrings OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of battery strings in the battery cabinet. The value can be 0,
meaning that no additional information on the battery string is available.
1 and higher means data in the table is provided."
::= { upsBatteryCabinetEntry 14 }
upsBatteryCabinetNumberOfVerticalPositions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of vertical levels or shelves for battery blocks/modules.
The levels are indexed from the bottom up"
::= { upsBatteryCabinetEntry 15 }
upsBatteryCabinetNumberOfHorizontalPositions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of horizontal positions for battery blocks/modules.
The levels are indexed from left to right"
::= { upsBatteryCabinetEntry 16 }
-- Battery Cabinet String Table
upsBatteryCabStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSBatteryCabStringEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"Table of battery strings in the complete battery solution"
::= { upsBattery 6 }
upsBatteryCabStringEntry OBJECT-TYPE
SYNTAX UPSBatteryCabStringEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"An entry containing information applicable to a particular battery string
in the battery cabinet."
INDEX { upsBatteryCabStringIndex }
::= { upsBatteryCabStringTable 1 }
UPSBatteryCabStringEntry ::= SEQUENCE {
upsBatteryCabStringIndex INTEGER,
upsBatteryCabStringCabReference INTEGER,
upsBatteryCabStringLocalIndex INTEGER,
upsBatteryCabStringCurrent INTEGER,
upsBatteryCabStringAverageTemperature INTEGER,
upsBatteryCabStringMaxTemperature INTEGER,
upsBatteryCabStringMinTemperature INTEGER,
upsBatteryCabStringFuseStatus INTEGER,
upsBatteryCabStringNumberOfBlocks INTEGER
}
upsBatteryCabStringIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The battery cabinet string identifier. Battery cabinet string or halfstring
table index."
::= { upsBatteryCabStringEntry 1 }
upsBatteryCabStringCabReference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Reference to the global battery cabinet index where the battery string is placed."
::= { upsBatteryCabStringEntry 2 }
upsBatteryCabStringLocalIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Local battery string identification index in the actual battery cabinet (E.g. String 2 in cabinet)"
::= { upsBatteryCabStringEntry 3 }
upsBatteryCabStringCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The current in a battery string or battery halfstring, in tenths of Amps."
::= { upsBatteryCabStringEntry 4 }
upsBatteryCabStringAverageTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Temperature of the battery string or the average of the aggregated temperature of each
battery block/module (in tenths of degrees Celcius). "
::= { upsBatteryCabStringEntry 5 }
upsBatteryCabStringMaxTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The actual highest battery temperature measurement for the battery blocks/modules (in tenths of degrees Celcius)."
::= { upsBatteryCabStringEntry 6 }
upsBatteryCabStringMinTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The actual lowest battery temperature measurement for the battery blocks/modules (in tenths of degrees Celcius)."
::= { upsBatteryCabStringEntry 7 }
upsBatteryCabStringFuseStatus OBJECT-TYPE
SYNTAX INTEGER {
fuseOpen(1),
fuseOk(2),
notPresent(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"If the battery string has a common fuse, the status is given by this value.
1 = Fuse open
2 = Fuse OK
3 = Not present"
::= { upsBatteryCabStringEntry 8 }
upsBatteryCabStringNumberOfBlocks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of battery blocks/modules in a battery string.
Can be 0, if no data is available in the table of individual battery blocks/cartridges"
::= { upsBatteryCabStringEntry 9 }
-- Battery Cabinet Block Table
upsBatteryCabBlockTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSBatteryCabBlockEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"Table of battery blocks/modules in the complete battery solution."
::= { upsBattery 7 }
upsBatteryCabBlockEntry OBJECT-TYPE
SYNTAX UPSBatteryCabBlockEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"An entry containing information applicable to a particular battery block
in the battery cabinet."
INDEX { upsBatteryCabBlockIndex }
::= { upsBatteryCabBlockTable 1 }
UPSBatteryCabBlockEntry ::= SEQUENCE {
upsBatteryCabBlockIndex INTEGER,
upsBatteryCabBlockStringReference INTEGER,
upsBatteryCabBlockLocalIndex INTEGER,
upsBatteryCabBlockPresent INTEGER,
upsBatteryCabBlockType DisplayString,
upsBatteryCabBlockTemperature INTEGER,
upsBatteryCabBlockFuseStatus INTEGER,
upsBatteryCabBlockVoltage INTEGER,
upsBatteryCabBlockNumberOfCells INTEGER,
upsBatteryCabBlockVerticalPosition INTEGER,
upsBatteryCabBlockHorizontalPosition INTEGER
}
upsBatteryCabBlockIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The battery cabinet block identifier. Global battery cabinet block
table index."
::= { upsBatteryCabBlockEntry 1 }
upsBatteryCabBlockStringReference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Reference to the specific global battery string index"
::= { upsBatteryCabBlockEntry 2 }
upsBatteryCabBlockLocalIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Local battery block/module identification index in the actual battery string (E.g. Battery block 3 in the battery string)"
::= { upsBatteryCabBlockEntry 3 }
upsBatteryCabBlockPresent OBJECT-TYPE
SYNTAX INTEGER {
present(1),
notPresent(2),
notAvailable(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Value indicates if battery block/module is present in the system.
Typically battery modules are removable and battery blocks are static. Reports notAvailable(3) if data is not available"
::= { upsBatteryCabBlockEntry 4 }
upsBatteryCabBlockType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Text string value, showing the vendor and model of the battery in the battery block/module"
::= { upsBatteryCabBlockEntry 5 }
upsBatteryCabBlockTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The temperature for the battery block/module in tenths of degrees Celcius.
If multiple sensors are available it is the highest temperature in the battery block/module"
::= { upsBatteryCabBlockEntry 6 }
upsBatteryCabBlockFuseStatus OBJECT-TYPE
SYNTAX INTEGER {
fuseOpen(1),
fuseOk(2),
notPresent(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"If the battery module has a fuse, the status is given by this value.
1 = Fuse open
2 = Fuse OK
3 = Not present"
::= { upsBatteryCabBlockEntry 7 }
upsBatteryCabBlockVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The voltage of the battery block/module"
::= { upsBatteryCabBlockEntry 8 }
upsBatteryCabBlockNumberOfCells OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of cells in the battery block/module"
::= { upsBatteryCabBlockEntry 9 }
upsBatteryCabBlockVerticalPosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The vertical position of the battery block/module in the actual battery cabinet
(E.g. 4, if it is the 4th shelf counting from the bottom)"
::= { upsBatteryCabBlockEntry 10 }
upsBatteryCabBlockHorizontalPosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The horizontal position of the battery block/module in the actual battery cabinet
(E.g. 3, if it is the 3rd position counting from the left)"
::= { upsBatteryCabBlockEntry 11 }
-- Battery Block Cell Table
upsBatteryCabBlockCellTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSBatteryCabBlockCellEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"Table of battery cells in a battery block/module in the complete battery solution"
::= { upsBattery 8 }
upsBatteryCabBlockCellEntry OBJECT-TYPE
SYNTAX UPSBatteryCabBlockCellEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"An entry containing information applicable to a particular battery cell
inside the battery block."
INDEX { upsBatteryCabBlockCellIndex }
::= { upsBatteryCabBlockCellTable 1 }
UPSBatteryCabBlockCellEntry ::= SEQUENCE {
upsBatteryCabBlockCellIndex INTEGER,
upsBatteryCabBlockCellReference INTEGER,
upsBatteryCabBlockCellLocalIndex INTEGER,
upsBatteryCabBlockCellVoltage INTEGER,
upsBatteryCabBlockCellTemperature INTEGER
}
upsBatteryCabBlockCellIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The battery block cell identifier. Global battery block cell
table index."
::= { upsBatteryCabBlockCellEntry 1 }
upsBatteryCabBlockCellReference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Reference to the specific global battery block/module index."
::= { upsBatteryCabBlockCellEntry 2 }
upsBatteryCabBlockCellLocalIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Local battery block/module identification index in the actual battery block (E.g. battery cell 5 in the battery block)"
::= { upsBatteryCabBlockCellEntry 3 }
upsBatteryCabBlockCellVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The measured battery cell voltage"
::= { upsBatteryCabBlockCellEntry 4 }
upsBatteryCabBlockCellTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The temperature for the battery cell in tenths of degrees Celcius.
If there is not a temperature sensor for each battery cell, then report -1 for those, which are not present."
::= { upsBatteryCabBlockCellEntry 5 }
-- the upsBasicInput group
upsBasicInputPhase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current AC input phase."
::= { upsBasicInput 1 }
-- the upsAdvInput group
upsAdvInputLineVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current utility line voltage in VAC."
::= { upsAdvInput 1 }
upsAdvInputMaxLineVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum utility line voltage in VAC over the
previous 1 minute period."
::= { upsAdvInput 2 }
upsAdvInputMinLineVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum utility line voltage in VAC over the
previous 1 minute period."
::= { upsAdvInput 3 }
upsAdvInputFrequency OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current input frequency to the UPS system in Hz."
::= { upsAdvInput 4 }
upsAdvInputLineFailCause OBJECT-TYPE
SYNTAX INTEGER {
noTransfer(1),
highLineVoltage(2),
brownout(3),
blackout(4),
smallMomentarySag(5),
deepMomentarySag(6),
smallMomentarySpike(7),
largeMomentarySpike(8),
selfTest(9),
rateOfVoltageChange(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The reason for the occurrence of the last transfer to UPS
battery power. The variable is set to:
- noTransfer(1) -- if there is no transfer yet.
- highLineVoltage(2) -- if the transfer to battery is caused
by an over voltage greater than the high transfer voltage.
- brownout(3) -- if the duration of the outage is greater than
five seconds and the line voltage is between 40% of the
rated output voltage and the low transfer voltage.
- blackout(4) -- if the duration of the outage is greater than five
seconds and the line voltage is between 40% of the rated
output voltage and ground.
- smallMomentarySag(5) -- if the duration of the outage is less
than five seconds and the line voltage is between 40% of the
rated output voltage and the low transfer voltage.
- deepMomentarySag(6) -- if the duration of the outage is less
than five seconds and the line voltage is between 40% of the
rated output voltage and ground. The variable is set to
- smallMomentarySpike(7) -- if the line failure is caused by a
rate of change of input voltage less than ten volts per cycle.
- largeMomentarySpike(8) -- if the line failure is caused by
a rate of change of input voltage greater than ten volts per cycle.
- selfTest(9) -- if the UPS was commanded to do a self test.
- rateOfVoltageChange(10) -- if the failure is due to the rate of change of
the line voltage."
::= { upsAdvInput 5 }
upsAdvInputNominalFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input frequency of the UPS system in Hz."
::= { upsAdvInput 6 }
upsAdvInputNominalVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal input voltage of the UPS system in VAC."
::= { upsAdvInput 7 }
upsAdvInputBypassNominalFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal bypass input frequency of the UPS system in Hz."
::= { upsAdvInput 8 }
upsAdvInputBypassNominalVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal bypass input voltage of the UPS system in VAC."
::= { upsAdvInput 9 }
upsAdvInputStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsAdvInputStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the value of upsPhaseNumInputs."
::= { upsAdvInput 10 }
upsAdvInputStatisticsEntry OBJECT-TYPE
SYNTAX UpsAdvInputStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input."
INDEX { upsAdvInputStatisticsIndex }
::= { upsAdvInputStatisticsTable 1 }
UpsAdvInputStatisticsEntry ::= SEQUENCE {
upsAdvInputStatisticsIndex INTEGER,
upsAdvInputApparentPower INTEGER,
upsAdvInputVoltageTHD INTEGER,
upsAdvInputBypassVoltageTHD INTEGER,
upsAdvInputPeakCurrent INTEGER,
upsAdvInputBypassPeakCurrent INTEGER,
upsAdvInputActivePower INTEGER
}
upsAdvInputStatisticsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { upsAdvInputStatisticsEntry 1 }
upsAdvInputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input apparent power(sum of all of the three phases) measured in kVA."
::= { upsAdvInputStatisticsEntry 2 }
upsAdvInputVoltageTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage Total Harmonic Distortion in percent."
::= { upsAdvInputStatisticsEntry 3 }
upsAdvInputBypassVoltageTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bypass input voltage Total Harmonic Distortion in percent."
::= { upsAdvInputStatisticsEntry 4 }
upsAdvInputPeakCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input peak current in Amperes."
::= { upsAdvInputStatisticsEntry 5 }
upsAdvInputBypassPeakCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bypass input peak current in Amperes."
::= { upsAdvInputStatisticsEntry 6 }
upsAdvInputActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input active power measured in kW."
::= { upsAdvInputStatisticsEntry 7 }
upsAdvInputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input total apparent power(sum of all three phases)
of the UPS system in kVA."
::= { upsAdvInput 11 }
upsAdvInputTotalActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input total active power(sum of all three phases)
of the UPS system in kW."
::= { upsAdvInput 12 }
upsAdvInputBypassTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input bypass total apparent power(sum of all three phases)
of the UPS system in kVA."
::= { upsAdvInput 13 }
upsAdvInputBypassTotalActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input bypass total active power(sum of all three phases)
of the UPS system in kW."
::= { upsAdvInput 14 }
upsAdvInputEnergyUsage OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input energy usage of the UPS in kWh."
::= { upsAdvInput 15 }
upsAdvInputDCVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DC input voltage in Volts."
::= { upsAdvInput 16 }
upsAdvInputDCCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DC input current in Amps."
::= { upsAdvInput 17 }
-- the upsHighPrecInput group
upsHighPrecInputLineVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current utility line voltage in tenths of VAC."
::= { upsHighPrecInput 1 }
upsHighPrecInputMaxLineVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum utility line voltage in tenths of VAC over the
previous 1 minute period."
::= { upsHighPrecInput 2 }
upsHighPrecInputMinLineVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum utility line voltage in tenths of VAC over the
previous 1 minute period."
::= { upsHighPrecInput 3 }
upsHighPrecInputFrequency OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current input frequency to the UPS system in tenths of Hz."
::= { upsHighPrecInput 4 }
upsHighPrecInputEnergyUsage OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input energy usage of the UPS in hundredths of kWh."
::= { upsHighPrecInput 5 }
upsHighPrecInputBypassVoltage OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current bypass line voltage in tenths of VAC."
::= { upsHighPrecInput 6 }
upsHighPrecInputBypassFrequency OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current input bypass frequency to the UPS system in tenths of Hz."
::= { upsHighPrecInput 7 }
-- the upsBasicOutput group
upsBasicOutputStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
onLine(2),
onBattery(3),
onSmartBoost(4),
timedSleeping(5),
softwareBypass(6),
off(7),
rebooting(8),
switchedBypass(9),
hardwareFailureBypass(10),
sleepingUntilPowerReturn(11),
onSmartTrim(12),
ecoMode(13),
hotStandby(14),
onBatteryTest(15),
emergencyStaticBypass(16),
staticBypassStandby(17),
powerSavingMode(18),
spotMode(19),
eConversion(20),
chargerSpotmode(21),
inverterSpotmode(22),
activeLoad(23),
batteryDischargeSpotmode(24),
inverterStandby (25),
chargerOnly(26)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the UPS. If the UPS is unable to
determine the state of the UPS this variable is set
to unknown(1).
During self-test most UPSes report onBattery(3) but
some that support it will report onBatteryTest(15).
To determine self-test status across all UPSes, refer
to the upsBasicStateOutputState OID."
::= { upsBasicOutput 1 }
upsBasicOutputPhase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual number of output phases in a UPS"
::= { upsBasicOutput 2 }
upsBasicSystemStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
onLine(2),
onBattery(3),
onSmartBoost(4),
timedSleeping(5),
softwareBypass(6),
off(7),
rebooting(8),
switchedBypass(9),
hardwareFailureBypass(10),
sleepingUntilPowerReturn(11),
onSmartTrim(12),
ecoMode(13),
inverter(14),
eConversion(15),
staticBypassStandby(16),
efficiencyBoosterMode(17)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current state for the whole system (UPS and surrounding breakers).
If the UPS is unable to determine the state of the system, this
variable is set to unknown(1)."
::= { upsBasicOutput 3 }
upsBasicSystemInternalTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual internal temperature of the UPS system in Celsius."
::= { upsBasicOutput 4 }
upsBasicSystemInverterStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
inFaultCondition(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the UPS inverter. If the UPS is unable
to determine the state of the inverter, this variable is set
to unknown(1)."
::= { upsBasicOutput 5 }
upsBasicSystemPFCStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
inFaultCondition(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The general status of the power factor correction (AC input stage
of the UPS). If the UPS is unable to determine the state of PFC,
this variable is set to unknown(1)."
::= { upsBasicOutput 6 }
upsBasicOutputACwiringConfiguration OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
noNeutralWiredonSystem(2),
neutralUsedforSupplyingLoad(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if neutral wire on output side of the UPS is
used (load wired line to neutral). If the UPS is unable to
determine the state of neutral, this variable is set to
unknown(1)."
::= { upsBasicOutput 7 }
-- the upsAdvOutput group
upsAdvOutputVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage of the UPS system in VAC."
::= { upsAdvOutput 1 }
upsAdvOutputFrequency OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current output frequency of the UPS system in Hz."
::= { upsAdvOutput 2 }
upsAdvOutputLoad OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current UPS load expressed in percent
of rated capacity."
::= { upsAdvOutput 3 }
upsAdvOutputCurrent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current in amperes drawn by the load on the UPS."
::= { upsAdvOutput 4 }
upsAdvOutputRedundancy OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of power modules which can fail or be
removed without causing the UPS to generate a Minimum
Redundancy Lost event."
::= { upsAdvOutput 5 }
upsAdvOutputKVACapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum load that this UPS can support.
This value is dynamic for scalable 3-phase UPSs where power modules can be added for increased capacity.
The value indicates the actual available output capacity. For non-scalable 3-phase UPSs the value is
fixed to the UPS rating."
::= { upsAdvOutput 6 }
upsAdvOutputNominalFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal output frequency of the UPS system in Hz."
::= { upsAdvOutput 7 }
upsAdvOutputActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total output active power of the UPS system in W.
The total active power is the sum of phase 1, phase 2 and
phase 3 power."
::= { upsAdvOutput 8 }
upsAdvOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total output apparent power of all phases of the UPS system in VA."
::= { upsAdvOutput 9 }
upsAdvOutputStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsAdvOutputStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the value of upsPhaseNumOutputs."
::= { upsAdvOutput 10 }
upsAdvOutputStatisticsEntry OBJECT-TYPE
SYNTAX UpsAdvOutputStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { upsAdvOutputStatisticsIndex }
::= { upsAdvOutputStatisticsTable 1 }
UpsAdvOutputStatisticsEntry ::= SEQUENCE {
upsAdvOutputStatisticsIndex INTEGER,
upsAdvOutputPeakCurrent INTEGER,
upsAdvOutputCurrentTHD INTEGER,
upsAdvOutputCrestFactor INTEGER
}
upsAdvOutputStatisticsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { upsAdvOutputStatisticsEntry 1 }
upsAdvOutputPeakCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output peak current in Amperes."
::= { upsAdvOutputStatisticsEntry 2 }
upsAdvOutputCurrentTHD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current Total Harmonic Distortion in percent."
::= { upsAdvOutputStatisticsEntry 3 }
upsAdvOutputCrestFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current crest factor expressed in tenths."
::= { upsAdvOutputStatisticsEntry 4 }
upsAdvOutputNeutralCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neutral current in amperes."
::= { upsAdvOutput 11 }
upsAdvOutputEnergyUsage OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The output energy usage of the UPS in kWh."
::= { upsAdvOutput 12 }
upsAdvOutputSourceSynchronization OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the synchronization source for the inverter output frequency.
1. Main
2. Internal
3. External
4. On AC Bypass.
5. External / On Bypass
For other values it is unknown"
::= { upsAdvOutput 13 }
upsAdvOutputInverterFrequency OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Output frequency in Hz measured at the output of inverter."
::= { upsAdvOutput 14 }
-- the upsHighPrecOutput group
upsHighPrecOutputVoltage OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage of the UPS system in tenths of VAC."
::= { upsHighPrecOutput 1 }
upsHighPrecOutputFrequency OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current output frequency of the UPS system in tenths of Hz."
::= { upsHighPrecOutput 2 }
upsHighPrecOutputLoad OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current UPS load expressed in tenths of percent
of rated capacity."
::= { upsHighPrecOutput 3 }
upsHighPrecOutputCurrent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current in tenths of amperes drawn by the load on the UPS."
::= { upsHighPrecOutput 4 }
upsHighPrecOutputEfficiency OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The positive values represent efficiency of the UPS in tenths of percent.
-1 If UPS supports this OID but the result is not available
-2 Load is too low to report efficiency
-3 Output off and efficiency is 0
-4 On battery, efficiency is not measured or calculated in this mode
-5 In Bypass, efficiency is not measured or calculated in this mode
-6 Battery charging, battery is charging and adversely affecting efficiency
-7 Poor AC input, the main input is outside the optimum efficiency range"
::= { upsHighPrecOutput 5 }
upsHighPrecOutputEnergyUsage OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output energy usage of the UPS in hundredths of kWh."
::= { upsHighPrecOutput 6 }
-- the upsBasicConfig group
upsBasicConfigNumDevices OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of devices that are plugged into the UPS.
This value is customer configurable from the device entry table"
::= { upsBasicConfig 1 }
upsBasicConfigDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsBasicConfigDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of devices that are plugged into the UPS.
The number of entries is given by the value of
upsBasicConfigNumDevices."
::= { upsBasicConfig 2 }
upsBasicConfigDeviceEntry OBJECT-TYPE
SYNTAX UpsBasicConfigDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The devices plugged in to the UPS."
INDEX { deviceIndex }
::= { upsBasicConfigDeviceTable 1 }
UpsBasicConfigDeviceEntry ::=
SEQUENCE {
deviceIndex
INTEGER,
deviceName
DisplayString,
vaRating
INTEGER,
acceptThisDevice
INTEGER
}
deviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the device that is plugged into the UPS."
::= { upsBasicConfigDeviceEntry 1 }
deviceName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name/description of the device plugged into the UPS."
::= { upsBasicConfigDeviceEntry 2 }
vaRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The volt-amp rating of the device plugged into the UPS."
::= { upsBasicConfigDeviceEntry 3 }
acceptThisDevice OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An entry is added if yes, the entry is deleted if no."
::= { upsBasicConfigDeviceEntry 4 }
-- the upsAdvConfig group
upsAdvConfigRatedOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The nominal output voltage from the UPS in VAC.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a
set request, the UPS interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { upsAdvConfig 1 }
upsAdvConfigHighTransferVolt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum line voltage in VAC allowed before the
UPS system transfers to battery backup.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a
set request, the UPS interprets it as a the next higher
acceptable value. If the provided value is higher than
the highest acceptable value, the highest acceptable
value is used."
::= { upsAdvConfig 2 }
upsAdvConfigLowTransferVolt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum line voltage in VAC allowed before the
UPS system transfers to battery backup.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a
set request, the UPS interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { upsAdvConfig 3 }
upsAdvConfigAlarm OBJECT-TYPE
SYNTAX INTEGER {
timed(1),
atLowBattery(2),
never(3),
mute(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A flag indicating how the UPS should handle audible
line fail alarms:
timed(1): UPS alarm will sound after a preset timed duration starting
from the line fail condition (see OID upsAdvConfigAlarmTimer for the
alarm timer value)
atLowBattery(2): UPS alarm will sound when the UPS has reached a Low
Battery condition during a line fail
never(3): Disables the UPS audible alarm
mute(4): Mutes the current alarm for some UPSs only when it is in an
alarm state and will return to the previously configured option when
the UPS recovers from the alarm condition"
::= { upsAdvConfig 4 }
upsAdvConfigAlarmTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time after initial line failure at which the UPS
begins emitting audible alarms (beeping). This timer is
observed only if the value of extControlAlarm is timed(2).
Allowed values are 0 or 30 seconds.
If a value other than a supported value is provided in a
set request, the UPS interprets it as a the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { upsAdvConfig 5 }
upsAdvConfigMinReturnCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum battery capacity required before the UPS will
return from a low battery shutdown condition. The capacity is
measured from 0% battery capacity (or Low Battery) as a percent
of full capacity (100%). In other words, the UPS will not re-energize
the output until the battery has charged so that its' capacity is equal
to this value.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a
set request, the UPS interprets it as a the next higher
acceptable value. If the provided value is higher than
the highest acceptable value, the highest acceptable
value is used."
::= { upsAdvConfig 6 }
upsAdvConfigSensitivity OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
low(2),
medium(3),
high(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sensitivity of the UPS to utility line abnormalities
or noises."
::= { upsAdvConfig 7 }
upsAdvConfigLowBatteryRunTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired run time of the UPS, in seconds, once the
low battery condition is reached. During this time the UPS will
produce a constant warning tone which can not be disabled.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a set
request, the UPS interprets the value as the next higher
acceptable value. If the provided value is higher than the
highest acceptable value, the highest acceptable value is used."
::= { upsAdvConfig 8 }
upsAdvConfigReturnDelay OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay in seconds after utility line power returns
before the UPS will turn on. This value is also used
when the UPS comes out of a reboot and before the UPS
wakes up from 'sleep' mode.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a
set request, the UPS interprets it as a the next higher
acceptable value. If the provided value is higher than
the highest acceptable value, the highest acceptable
value is used."
::= { upsAdvConfig 9 }
upsAdvConfigShutoffDelay OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay in seconds the UPS remains on after being told
to turn off.
For a list of allowed values supported by your UPS model,
see the UPS User's Manual.
If a value other than a supported value is provided in a
set request, the UPS interprets it as a the next higher
acceptable value. If the provided value is higher than
the highest acceptable value, the highest acceptable
value is used."
::= { upsAdvConfig 10 }
upsAdvConfigUpsSleepTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in seconds for the UPS to go to 'sleep' when
instructed. When in sleep mode, the UPS will not provide
output power regardless of the input line state. Once the
specified time has elapsed, output power will be restored.
This is a configuration setting. The UPS will not go to
sleep until told to do so by the manager from a management
station.
Any input value is allowed, however the UPS only recognizes
1/10 of an hour increments. The provided value will be
rounded to the closest 1/10 of an hour with one exception:
Any value entered between 1 and 540 seconds will be rounded
to 360 seconds (or 6 minutes)."
::= { upsAdvConfig 11 }
upsAdvConfigSetEEPROMDefaults OBJECT-TYPE
SYNTAX INTEGER {
noSetEEPROMDefaults(1),
setEEPROMDefaults(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRITE: Resets the UPS EEPROM variables to default values.
READ: returns 1"
::= { upsAdvConfig 12 }
upsAdvConfigDipSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsAdvConfigDipSwitchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Current settings of UPS dip switches."
::= { upsAdvConfig 13 }
upsAdvConfigDipSwitchEntry OBJECT-TYPE
SYNTAX UpsAdvConfigDipSwitchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The current setting of one dip switch."
INDEX { dipSwitchIndex }
::= { upsAdvConfigDipSwitchTable 1 }
UpsAdvConfigDipSwitchEntry ::=
SEQUENCE {
dipSwitchIndex
INTEGER,
dipSwitchStatus
INTEGER
}
dipSwitchIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of a UPS dip switch."
::= { upsAdvConfigDipSwitchEntry 1 }
dipSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The setting of a UPS dip switch."
::= { upsAdvConfigDipSwitchEntry 2 }
upsAdvConfigBattExhaustThresh OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds prior to battery exhaustion when the
UPS will switch off power to its load."
::= { upsAdvConfig 14 }
upsAdvConfigPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The password entered at the UPS front panel to enable local
configuration of the EEProm. If the password is disabled or
is not supported, then the agent returns a null string."
::= { upsAdvConfig 15 }
upsAdvConfigAllowedSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsAdvConfigAllowedSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table listing the allowed values for all discrete
configurable UPS variables."
::= { upsAdvConfig 16 }
upsAdvConfigAllowedSetEntry OBJECT-TYPE
SYNTAX UpsAdvConfigAllowedSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry for a configurable UPS variable."
INDEX { apcUpsConfigFieldIndex }
::= { upsAdvConfigAllowedSetTable 1 }
UpsAdvConfigAllowedSetEntry ::= SEQUENCE {
apcUpsConfigFieldIndex INTEGER,
apcUpsConfigFieldOID OBJECT IDENTIFIER,
apcUpsConfigFieldValueRange DisplayString
}
apcUpsConfigFieldIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to an eeprom field entry."
::= { upsAdvConfigAllowedSetEntry 1 }
apcUpsConfigFieldOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OID of the current configurable value."
::= { upsAdvConfigAllowedSetEntry 2 }
apcUpsConfigFieldValueRange OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The discrete set of allowed values of a configurable
register. Individual values are delimited by a comma."
::= { upsAdvConfigAllowedSetEntry 3 }
upsAdvConfigBattCabAmpHour OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the amp-hour setting of the UPS battery solution.
The value shows the maximum battery capacity configured for the UPS when using a third party battery solution
regardless of the breaker positions. The actual available battery capacity based on breaker positions or
connected/disconnected battery strings, is presented in OID upsAdvBatteryTotalCapacity"
::= { upsAdvConfig 17 }
upsAdvConfigPositionSelector OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
rack (2),
tower (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure UPS position selector. If the UPS doesn't
support this configuration it will report unknown (1).
The positions are either rack (2) for rack mounted or
tower (3) for tower unit."
::= { upsAdvConfig 18 }
upsAdvConfigOutputFreqRange OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
freqRangeAUTO (2),
freqRange60Var1 (3),
freqRange60Var3 (4),
freqRange50Var1 (5),
freqRange50Var3 (6),
freqRange60Var10 (7),
freqRange50Var10 (8),
freqRange60Var1dot0 (9),
freqRange50Var1dot0 (10),
freqRange50Pct0dot5 (11),
freqRange50Pct1 (12),
freqRange50Pct2 (13),
freqRange50Pct4 (14),
freqRange50Pct6 (15),
freqRange50Pct8 (16),
freqRange60Pct0dot5 (17),
freqRange60Pct1 (18),
freqRange60Pct2 (19),
freqRange60Pct4 (20),
freqRange60Pct6 (21),
freqRange60Pct8 (22)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the output frequency tolerance range.
unknown(1) indicates the output frequency is unknown.
freqRangeAUTO(2) configure the output frequency range for automatic.
freqRange60Var1(3) configure the output frequency range for 60 +/- 0.1 Hz
freqRange60Var3(4) configure the output frequency range for 60 +/- 3.0 Hz
freqRange50Var1(5) configure the output frequency range for 50 +/- 0.1 Hz
freqRange50Var3(6) configure the output frequency range for 50 +/- 3.0 Hz
freqRange60Var10(7) configure the output frequency range for 60 +/- 10 Hz
freqRange50Var10(8) configure the output frequency range for 50 +/- 10 Hz
freqRange60Var1dot0(9) configure the output frequency range for 60 +/- 1.0 Hz
freqRange50Var1dot0(10) configure the output frequency range for 50 +/- 1.0 Hz
freqRange50Pct0dot5(11) configure the output frequency range for 50 Hz +/- 0.5 %
freqRange50Pct1(12) configure the output frequency range for 50 Hz +/- 1.0 %
freqRange50Pct2(13) configure the output frequency range for 50 Hz +/- 2.0 %
freqRange50Pct4(14) configure the output frequency range for 50 Hz +/- 4.0 %
freqRange50Pct6(15) configure the output frequency range for 50 Hz +/- 6.0 %
freqRange50Pct8(16) configure the output frequency range for 50 Hz +/- 8.0 %
freqRange60Pct0dot5(17) configure the output frequency range for 60 Hz +/- 0.5 %
freqRange60Pct1(18) configure the output frequency range for 60 Hz +/- 1.0 %
freqRange60Pct2(19) configure the output frequency range for 60 Hz +/- 2.0 %
freqRange60Pct4(20) configure the output frequency range for 60 Hz +/- 4.0 %
freqRange60Pct6(21) configure the output frequency range for 60 Hz +/- 6.0 %
freqRange60Pct8(22) configure the output frequency range for 60 Hz +/- 8.0 %
For a list of allowed values and conditions when variable can be set by your UPS model,
see the UPS User's Manual."
::= { upsAdvConfig 19 }
upsAdvConfigUPSFail OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
gotoBypass (2),
dropLoad (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the UPS fail action. If UPS fails,
and frequency or voltage is out of range it will either
GotoBypass (2) or DropLoad (3). This OID will report
unknown (1) if it is not supported feature or option."
::= { upsAdvConfig 20 }
upsAdvConfigAlarmRedundancy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure settings of UPS alarm if the redundancy is
under the current redundancy. Use 0 for never."
::= { upsAdvConfig 21 }
upsAdvConfigAlarmLoadOver OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure settings of UPS alarm if the load is
over the current load in kVA. Use -1 for never."
::= { upsAdvConfig 22 }
upsAdvConfigAlarmRuntimeUnder OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure settings of UPS alarm if the runtime is
under the current time of minutes. Use -1 for never."
::= { upsAdvConfig 23 }
upsAdvConfigVoutReporting OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
voutAUTO (2),
vout208 (3),
vout240 (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the way the UPS scales its output voltage readings.
unknown(1) indicates the Vout Reporting is unknown.
voutAUTO(2) configure the Vout Reporting for automatic scaling.
vout208(3) configure the Vout Reporting for 208 Volts.
vout240(4) configure the Vout Reporting for 240 Volts."
::= { upsAdvConfig 24 }
upsAdvConfigNumExternalBatteries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the number of external batteries connected to the UPS."
::= { upsAdvConfig 25 }
upsAdvConfigSimpleSignalShutdowns OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure Simple Signal shutdown commands from the Simple Signal
port to be issued to the UPS.
unknown(1) indicates the Simple Signal Shutdown setting is unknown.
disabled(2) configure to disable Simple Signal Shutdowns.
enabled(3) configure to enable Simple Signal Shutdowns."
::= { upsAdvConfig 26 }
upsAdvConfigMaxShutdownTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum amount of time for server shutdown to complete before a
UPS shutdown occurs."
::= { upsAdvConfig 27 }
upsAsiUpsControlServerRequestShutdown OBJECT-TYPE
SYNTAX INTEGER {
serverShutdownOff (1),
serverShutdownReboot (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Start a server shutdown sequence:
serverShutdownOff: Shutdown server and turn off UPS
serverShutdownReboot: Shutdown server and turn reboot UPS."
::= { upsAdvConfig 28 }
upsAdvConfigMinReturnRuntime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum amount of run time in seconds required before the output will be
turned on, using power calculation captured at start of last shutdown."
::= { upsAdvConfig 29 }
upsAdvConfigBasicSignalLowBatteryDuration OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The duration of runtime in seconds during an on-battery condition at which
the UPS will signal the basic low battery shutdown condition."
::= { upsAdvConfig 30 }
upsAdvConfigBypassPhaseLockRequired OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the condition for when bypass is an acceptable mode of operation as a
requirement."
::= { upsAdvConfig 31 }
upsAdvConfigOutputFreqSlewRate OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
slewRateQuarterHzPerSec (2),
slewRateHalfHzPerSec (3),
slewRate1HzPerSec (4),
slewRate2HzPerSec (5),
slewRate4HzPerSec (6),
slewRate6HzPerSec (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The rate at which the UPS will change its output frequency
in response to utility frequency changes."
::= { upsAdvConfig 32 }
upsAdvConfigChargerLevel OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
low (2),
high (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the rate at which the UPS charges its batteries."
::= { upsAdvConfig 33 }
upsAdvConfigBypassToleranceSetting OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
wide (2),
medium (3),
narrow (4),
custom (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting allows selecting from standard bypass tolerance configurations to suit their situation."
::= { upsAdvConfig 34 }
upsAdvConfigMainsSetting OBJECT-TYPE
SYNTAX INTEGER {
singleInput (1),
dualInput (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Configure the type of mains supply system.
singleInput (1) indicates a single supply system.
dualInput (2) indicates a dual supply system. "
::= { upsAdvConfig 35 }
upsAdvConfigACWiringSetting OBJECT-TYPE
SYNTAX INTEGER {
threeWire (1),
fourWire (2),
fourWireHRG (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Configure the AC wiring of the system.
threeWire (1) indicates 3-wire system configuration.
fourWire (2) indicates 4-wire system configuration.
fourWireHRG (3) indicates a 4-wire High resistive Grounding system."
::= { upsAdvConfig 36 }
upsAdvConfigUpperOutputVoltTolerance OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Upper tolerance of the output RMS voltage before transferring to bypass.
Expressed as percent of nominal voltage."
::= { upsAdvConfig 37 }
upsAdvConfigLowerOutputVoltTolerance OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Lower tolerance of the output RMS voltage before transferring to bypass.
Expressed as percent of nominal voltage."
::= { upsAdvConfig 38 }
upsAdvConfigUpperBypassVoltTolerance OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Upper tolerance of the bypass voltage that allows transfer to bypass by user.
Expressed as percent of nominal voltage."
::= { upsAdvConfig 39 }
upsAdvConfigLowerBypassVoltTolerance OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Lower tolerance of the bypass voltage that allows transfer to bypass by user.
Expressed as percent of nominal voltage."
::= { upsAdvConfig 40 }
upsAdvConfigOutofSyncBypassTransferDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the time (in milliseconds), indicating the gap in output voltage
if an asynchronous transfer to bypass needs to occur."
::= { upsAdvConfig 41 }
upsAdvConfigWarningAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the time delay for reporting warning alarms
(in seconds)."
::= { upsAdvConfig 43 }
upsAdvConfigInformationalAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the time delay for reporting informational alarms
(in seconds)."
::= { upsAdvConfig 44 }
upsAdvConfigGreenMode OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable UPS green mode feature."
::= { upsAdvConfig 45 }
upsAdvConfigLCDLocalLanguage OBJECT-TYPE
SYNTAX INTEGER {
english (1),
french (2),
italian (3),
german (4),
spanish (5),
portuguese (6),
japanese (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the language setting of the UPS LCD display information."
::= { upsAdvConfig 46 }
upsAdvConfigLCDLockOut OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable the control function of the UPS via the LCD Display."
::= { upsAdvConfig 47 }
upsAdvConfigChargerRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Change the maximum allowed UPS charge rate on select products where 100% represents
the manufacturer's recommended rate. A charge/discharge rate of C/10 for a 10 Ah
battery would be 1 where C is defined as the charge or discharge rate equal to the
capacity of a battery divided by 1 hour. To increase the charge rate by a factor of
2 to C/5, this oid would be set to 200%. This number would not change when external
packs are added or removed. Charging at too high a rate can result in boiling and/or
venting of electrolyte and/or high gas pressure."
::= { upsAdvConfig 48 }
upsAdvConfigBatterySelection OBJECT-TYPE
SYNTAX INTEGER {
vrla (1),
ventedcell (2),
nicd (3),
li-ion(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the installed battery type; VRLA is a Valve Regulated
Lead Acid type battery, Vented Cell is a wet cell type (car) battery, NiCd is a
Nickel-Cadmium type battery, and Li-Ion is Lithium Ion type battery.
Please use the OID defined under upsIdent: upsAdvEnergyStorageType"
::= { upsAdvConfig 49 }
upsAdvConfigBatteryHealthAlarmWarningTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the number of days before the battery health is depleted that the battery
health alarm is activated. Setting this to -1, if supported by the UPS, will suppress
the battery health alarm."
::= { upsAdvConfig 50 }
upsAdvConfigBatteryHealthAlarmSleepTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the number of days that the UPS's battery health alarm should sleep before
being activated again after being acknowledged. Setting this to -1, if supported by the
UPS, displays no other alarms after the first alarm is acknowledged."
::= { upsAdvConfig 51 }
upsAdvConfigSignalFlashVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the signal flash voltage in tenths of volts."
::= { upsAdvConfig 52 }
upsAdvConfigBatteryTemperatureCompensation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the battery temperature compensation voltage in
hundreds of volts per degree C. On products which support this
field, the charger voltage is reduced for each degree C rise
by the value configured in this setting multiplied by the
number of battery cells attached to the UPS."
::= { upsAdvConfig 53 }
upsAdvConfigBatteryChargerType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID describes type of battery charger used: standard or extended.
1 - Internal charger,
2 - Extended (CLA),
3 - Large extension (other cases),
4 - Extra large extension (XL),
5 - Double extra large extension (XXL)
For other numbers charger type is unknown"
::= { upsAdvConfig 54 }
upsAdvConfigAutomaticRestart OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether Automatic Restart is enabled or disabled."
::= { upsAdvConfig 55 }
upsAdvConfigDeepDischargeProtection OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether protection against deep discharge is enabled or disabled."
::= { upsAdvConfig 56 }
upsAdvConfigFreqBypassTransferRange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Tolerance of bypass AC frequency to switch on bypass. The frequency must be in
range of -X% to +X% around the nominal value."
::= { upsAdvConfig 57 }
upsAdvConfigUpsPowerconverterType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the type of UPS in terms of output phase and redundancy.
2 - Galaxy 7000 Unitary 3:3
3 - Galaxy 7000 Redundant 3:3
4 - Galaxy 7000 Parallel SSC 3:3
6 - Galaxy 7000 SSC 3:3
10 - Galaxy 300 Unitary 3:3
11 - Galaxy 300 Unitary 3:1
12 - Galaxy 300 Redundant 3:3
13 - Galaxy 300 Redundant 3:1
14 - Galaxy 5000/5500 Unitary
15 - Galaxy 5000/5500 Parallel
16 - Galaxy 5000/5500 Unitary Frequency Converter
17 - Galaxy 5000/5500 Parallel Frequency Converter
For other values UPS is unknown. "
::= { upsAdvConfig 58 }
upsAdvConfigFrequencyConverterMode OBJECT-TYPE
SYNTAX INTEGER {
autoRanging (1),
frequencyConverter (2),
unknown (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the output frequency is in Auto Ranging or Frequency converter mode.
In Auto Ranging mode the inverter provides output frequency in the same range as the input.
In Frequency converter mode it is possible to have 50Hz input and 60 Hz output and vice versa."
::= { upsAdvConfig 59 }
upsAdvConfigACQualificationTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in seconds that the voltage is required to be in the acceptable range before being declared to be acceptable."
::= { upsAdvConfig 60 }
-- the upsSyncCtrlGroupConfig group
upsSCGMembershipGroupNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SCG Membership Group number (MGN) is a 16-bit number allowing
up to 65534 separate groups that can be identified and distinguished
per IP subnet. Zero and 65535 are not used. The MGN is used in all
communication between members of the SCG and a Network Management Card
(NMC) will listen and only respond to commands sent to it using its
configured SCG ID."
::= { upsSyncCtrlGroupConfig 1 }
upsSCGActiveMembershipStatus OBJECT-TYPE
SYNTAX INTEGER {
enabledSCG (1),
disabledSCG (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Membership in the configured SCG can be enabled and
disabled. If an NMC is configured for an SCG, but
has its membership disabled, all synchronized control commands
received will be ignored."
::= { upsSyncCtrlGroupConfig 2 }
upsSCGPowerSynchronizationDelayTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Power Synchronization Delay Time (PSD) setting is the maximum
number of seconds an SCG Initiator will wait for all SCG members to
recover utility power before completing the reboot sequence of a
reboot or sleep command. If all SCG members are ready to proceed,
no additional delay is introduced."
::= { upsSyncCtrlGroupConfig 3 }
upsSCGReturnBatteryCapacityOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A reboot command uses the Initiator's Return battery Capacity (RBC) to control
when the SCG completes this operation. In a Normal Control Operation (NCC) the
UPS will only complete the reboot if RBC is reached. Due to normal battery
charge rate variations it may be desirable for the Followers to complete the
reboot if they are within some range of the Initiator's RBC when the Initiator
is prepared (charged to RBC) to complete the reboot. The Return Battery
Capacity Offset (RBCO) defines a percent battery capacity subtracted from an
RBC above which a Follower's battery must be charged for it to complete a
reboot. For example, if the Initiator's RBC is 50% and the Initiator's RBCO is
5% then a Follower's battery capacity is within range if it is greater or equal
to 45% (50% - 5%) at the time when the Initiator tries to complete the reboot
command. The default RBCO is 10%. "
::= { upsSyncCtrlGroupConfig 4 }
upsSCGMultiCastIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The MultiCast IP address of the SCG Group."
::= { upsSyncCtrlGroupConfig 5 }
-- the upsSyncCtrlGroupStatus group
upsSCGNumOfGroupMembers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active, communicating members in the Sync Control Group (SCG).
This variable indicates the number of rows in the SCG Status Table."
::= { upsSyncCtrlGroupStatus 1 }
-- Sync Control Group Status Table
upsSCGStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsSCGStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of SCG status table entries. The number of entries
is given by the value of upsSCGNumOfGroupMembers."
::= { upsSyncCtrlGroupStatus 2 }
upsSCGStatusEntry OBJECT-TYPE
SYNTAX UpsSCGStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular SCG Member."
INDEX { upsSCGStatusTableIndex }
::= { upsSCGStatusTable 1 }
UpsSCGStatusEntry ::= SEQUENCE {
upsSCGStatusTableIndex INTEGER,
upsSCGMemberIP IpAddress,
upsSCGACInputStatus INTEGER,
upsSCGACOutputStatus INTEGER
}
upsSCGStatusTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of a status entry for an active, communicating SCG member."
::= { upsSCGStatusEntry 1 }
upsSCGMemberIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of an active, communicating SCG Member."
::= { upsSCGStatusEntry 2 }
upsSCGACInputStatus OBJECT-TYPE
SYNTAX INTEGER {
acInGood(1),
acInBad(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID indicates the AC Input Status of the SCG Member.
acInGood(1) indicates the AC Input is within tolerance.
acInBad(2) indicates the AC Input is not within tolerance."
::= { upsSCGStatusEntry 3 }
upsSCGACOutputStatus OBJECT-TYPE
SYNTAX INTEGER {
acOutOn(1),
acOutOff(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID indicates the AC Output Status of the SCG Member.
acOutOn(1) indicates the UPS output is providing power to the load.
acOutOff(2) indicates the UPS output is not providing power to the load. "
::= { upsSCGStatusEntry 4 }
-- the upsBasicState group
upsBasicStateOutputState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the current state(s) of the UPS. If the Network Card
is unable to determine the state of the UPS, this
variable is set to 'UNKNOWN'.
The flags are numbered 1 to 64, read from left to
right. The flags are defined as follows:
Flag 1: Abnormal Condition Present
Flag 2: On Battery
Flag 3: Low Battery
Flag 4: On Line
Flag 5: Replace Battery
Flag 6: Serial Communication Established
Flag 7: AVR Boost Active
Flag 8: AVR Trim Active
Flag 9: Overload
Flag 10: Runtime Calibration
Flag 11: Batteries Discharged
Flag 12: Manual Bypass
Flag 13: Software Bypass
Flag 14: In Bypass due to Internal Fault
Flag 15: In Bypass due to Supply Failure
Flag 16: In Bypass due to Fan Failure
Flag 17: Sleeping on a Timer
Flag 18: Sleeping until Utility Power Returns
Flag 19: On
Flag 20: Rebooting
Flag 21: Battery Communication Lost
Flag 22: Graceful Shutdown Initiated
Flag 23: Smart Boost or Smart Trim Fault
Flag 24: Bad Output Voltage
Flag 25: Battery Charger Failure
Flag 26: High Battery Temperature
Flag 27: Warning Battery Temperature
Flag 28: Critical Battery Temperature
Flag 29: Self Test In Progress
Flag 30: Low Battery / On Battery
Flag 31: Graceful Shutdown Issued by Upstream Device
Flag 32: Graceful Shutdown Issued by Downstream Device
Flag 33: No Batteries Attached
Flag 34: Synchronized Command is in Progress
Flag 35: Synchronized Sleeping Command is in Progress
Flag 36: Synchronized Rebooting Command is in Progress
Flag 37: Inverter DC Imbalance
Flag 38: Transfer Relay Failure
Flag 39: Shutdown or Unable to Transfer
Flag 40: Low Battery Shutdown
Flag 41: Electronic Unit Fan Failure
Flag 42: Main Relay Failure
Flag 43: Bypass Relay Failure
Flag 44: Temporary Bypass
Flag 45: High Internal Temperature
Flag 46: Battery Temperature Sensor Fault
Flag 47: Input Out of Range for Bypass
Flag 48: DC Bus Overvoltage
Flag 49: PFC Failure
Flag 50: Critical Hardware Fault
Flag 51: Green Mode/ECO Mode
Flag 52: Hot Standby
Flag 53: Emergency Power Off (EPO) Activated
Flag 54: Load Alarm Violation
Flag 55: Bypass Phase Fault
Flag 56: UPS Internal Communication Failure
Flag 57: Efficiency Booster Mode
Flag 58: Off
Flag 59: Standby
Flag 60: Minor or Environment Alarm
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>"
::= { upsBasicState 1 }
upsBasicStateAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
noAlarms (1),
infoAlarm (2),
warningAlarm (3),
criticalAlarm (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the Power Module.
noAlarms(1) indicates the device has no alarms present.
infoAlarm (2) indicates the device has alarms and the
highest severity of the alarms present is infomational.
warningAlarm (3) indicates the device has alarms and the
highest severity of the alarms present is warning.
criticalAlarm (4) indicates the device has alarms and the
highest severity of the alarms present is critical."
::= { upsBasicState 2 }
-- the upsAdvState group
upsAdvStateAbnormalConditions OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 32 flags representing
the current active UPS faults. If the Network Card
is unable to determine the values of the flags, this
variable is set to 'UNKNOWN'. If this variable is not
supported by the connected UPS, this variable is set to
'NOT SUPPORTED'.
The flags are numbered from 1 to 32, and read from left to
right. The flags are defined as follows:
Flag 1: Power Module Failure
Flag 2: Main Intelligence Module Failure
Flag 3: Redundant Intelligence Module Failure
Flag 4: Battery Failure
Flag 5: Load(kVA) Alarm Threshold Violation
Flag 6: Redundancy Lost
Flag 7: Redundancy Below Alarm Threshold
Flag 8: Bypass not in Range; Either Frequency or Voltage
Flag 9: Bypass Contactor Stuck in Bypass Condition
Flag 10: Bypass Contactor Stuck in On-Line Condition
Flag 11: In Bypass due to an Internal Fault
Flag 12: In Bypass due to an Overload
Flag 13: In Maintenance Bypass
Flag 14: Input Circuit Braker Tripped Open
Flag 15: System Level Fan Failure
Flag 16: Redundant Intelligent Module in Control
Flag 17: IIC Inter-Module Communication Failure
Flag 18: No Working Power Modules
Flag 19: Load Shutdown From Bypass; Input Frequency
Flag 20: Runtime Below Alarm Threshold
Flag 21: Extended Run Frame Fault
Flag 22: Output Voltage out of Range
Flag 23: UPS Not Synchronized
Flag 24: No Batteries Installed
Flag 25: Battery Voltage High
Flag 26: UPS Specific Fault Detected
Flag 27: Site Wiring Fault
Flag 28: Backfeed Protection Relay Opened
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>"
::= { upsAdvState 1 }
upsAdvStateSymmetra3PhaseSpecificFaults OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Symmetra
3-Phase UPS models. If the Network Card is unable to
determine the values of the flags, this variable is set
to 'UNKNOWN'. If the connected UPS does not use this
variable, it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: External Switch Gear Failure
Flag 2: External Transformer Over Temperature
Flag 3: External DC Circuit Breaker Tripped
Flag 4: System Power Supply Failure
Flag 5: Battery Monitor Card Failure
Flag 6: Battery Monitor Card Removed
Flag 7: XR Communication Card Failure
Flag 8: XR Communication Card Removed
Flag 9: External Switch Gear Monitoring Card Failure
Flag 10: External Switch Gear Monitoring Card Removed
Flag 11: Internal DC Circuit Breaker Tripped
Flag 12: Static Bypass Switch Failure
Flag 13: System EEPROM Removed
Flag 14: System EEPROM Failure
Flag 15: UPS in Forced Bypass
Flag 16: Static Bypass Switch Module Removed
Flag 17: System Start-Up Configuration Fault
Flag 18: Battery Charger Shutdown Externally
Flag 19: <Not Used>
Flag 20: <Not Used>
Flag 21: <Not Used>
Flag 22: <Not Used>
Flag 23: <Not Used>
Flag 24: <Not Used>
Flag 25: <Not Used>
Flag 26: <Not Used>
Flag 27: <Not Used>
Flag 28: <Not Used>
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>
Flag 33: <Not Used>
Flag 34: <Not Used>
Flag 35: <Not Used>
Flag 36: <Not Used>
Flag 37: <Not Used>
Flag 38: <Not Used>
Flag 39: <Not Used>
Flag 40: <Not Used>
Flag 41: <Not Used>
Flag 42: <Not Used>
Flag 43: <Not Used>
Flag 44: <Not Used>
Flag 45: <Not Used>
Flag 46: <Not Used>
Flag 47: <Not Used>
Flag 48: <Not Used>
Flag 49: <Not Used>
Flag 50: <Not Used>
Flag 51: <Not Used>
Flag 52: <Not Used>
Flag 53: <Not Used>
Flag 54: <Not Used>
Flag 55: <Not Used>
Flag 56: <Not Used>
Flag 57: <Not Used>
Flag 58: <Not Used>
Flag 59: <Not Used>
Flag 60: <Not Used>
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>"
::= { upsAdvState 2 }
upsAdvStateDP300ESpecificFaults OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Silcon
DP300E UPS models. If the Network Card is unable to
determine the values of the flags, this variable is set
to 'UNKNOWN'. If the connected UPS does not use this
variable, it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: Peak Current Limiter Active
Flag 2: Bypass Power Supply Fault
Flag 3: Delta Current Limiter Active
Flag 4: Fan Fault
Flag 5: High DC warning
Flag 6: Inverter Voltage Error
Flag 7: Parallel Synchronization Error
Flag 8: Second Power Supply Fault
Flag 9: Internal Power Supply Fault
Flag 10: <Not Used>
Flag 11: <Not Used>
Flag 12: <Not Used>
Flag 13: <Not Used>
Flag 14: Bypass Static Switch High Temperature
Flag 15: High Battery Temperature
Flag 16: Battery Weak
Flag 17: <Not Used>
Flag 18: System Locked in Operation Mode
Flag 19: RAM1 Memory Write Error
Flag 20: Memory Write Error
Flag 21: Communication to VQ Bypass Lost
Flag 22: Communication to VQ Output Lost
Flag 23: Communication to DMU Lost
Flag 24: Communication to Controller Lost
Flag 25: Communication to Parallel IF Lost
Flag 26: External Shutdown Accepted
Flag 27: DC Capacitor Charge Error
Flag 28: Communication to VQ Mains Lost
Flag 29: Bypass Synchronization Error
Flag 30: Charge Error
Flag 31: SII Aux Input Activiated
Flag 32: <Not Used>
Flag 33: Blown Inverter Fuse
Flag 34: Blown Rectifier Fuse
Flag 35: Auxilliary 1 Fault
Flag 36: <Not Used>
Flag 37: <Not Used>
Flag 38: <Not Used>
Flag 39: <Not Used>
Flag 40: <Not Used>
Flag 41: <Not Used>
Flag 42: <Not Used>
Flag 43: <Not Used>
Flag 44: <Not Used>
Flag 45: <Not Used>
Flag 46: High Temperature Charger Magnetic
Flag 47: <Not Used>
Flag 48: Battery Monitor Warning
Flag 49: Battery Monitor Alarm
Flag 50: <Not Used>
Flag 51: <Not Used>
Flag 52: <Not Used>
Flag 53: TSM 1/2/3 Temperature Shutdown
Flag 54: Charger 0/30 Temperature Warning
Flag 55: Charger 0/30 Temperature Shutdown
Flag 56: High Output Voltage
Flag 57: SSW Temperature Over 90
Flag 58: <Not Used>
Flag 59: Low Current Failure In AC Capacitors
Flag 60: <Not Used>
Flag 61: Advanced Battery Management Not Installed
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>"
::= { upsAdvState 3 }
upsAdvStateSymmetraSpecificFaults OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Symmetra
UPS models. If the Network Card is unable to determine
the values of the flags, this variable is set to 'UNKNOWN'.
If the connected UPS does not use this variable, it is
set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: System Fault
Flag 2: Bypass Relay Fault
Flag 3: Power Module Turn Off Failure
Flag 4: Frame Identification Fault
Flag 5: <Not Used>
Flag 6: <Not Used>
Flag 7: <Not Used>
Flag 8: <Not Used>
Flag 9: <Not Used>
Flag 10: <Not Used>
Flag 11: <Not Used>
Flag 12: <Not Used>
Flag 13: <Not Used>
Flag 14: <Not Used>
Flag 15: <Not Used>
Flag 16: <Not Used>
Flag 17: <Not Used>
Flag 18: <Not Used>
Flag 19: <Not Used>
Flag 20: <Not Used>
Flag 21: <Not Used>
Flag 22: <Not Used>
Flag 23: <Not Used>
Flag 24: <Not Used>
Flag 25: <Not Used>
Flag 26: <Not Used>
Flag 27: <Not Used>
Flag 28: <Not Used>
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>
Flag 33: <Not Used>
Flag 34: <Not Used>
Flag 35: <Not Used>
Flag 36: <Not Used>
Flag 37: <Not Used>
Flag 38: <Not Used>
Flag 39: <Not Used>
Flag 40: <Not Used>
Flag 41: <Not Used>
Flag 42: <Not Used>
Flag 43: <Not Used>
Flag 44: <Not Used>
Flag 45: <Not Used>
Flag 46: <Not Used>
Flag 47: <Not Used>
Flag 48: <Not Used>
Flag 49: <Not Used>
Flag 50: <Not Used>
Flag 51: <Not Used>
Flag 52: <Not Used>
Flag 53: <Not Used>
Flag 54: <Not Used>
Flag 55: <Not Used>
Flag 56: <Not Used>
Flag 57: <Not Used>
Flag 58: <Not Used>
Flag 59: <Not Used>
Flag 60: <Not Used>
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>"
::= { upsAdvState 4 }
upsAdvStateSmartUPSSpecificFaults OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Smart-UPS
UPS models. If the Network Card is unable to determine
the values of the flags, this variable is set to
'UNKNOWN'. If the connected UPS does not use this
variable, it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: EPO Switch Activated
Flag 2: Static Bypass Switch Fault
Flag 3: System Configuration Fault
Flag 4: Power Supply Unit Fault
Flag 5: Weak Battery
Flag 6: High Battery Temperature
Flag 7: Internal Mechanical Bypass
Flag 8: Loss Of Parallel Redundancy
Flag 9: Parallel Bus Communication Fault on Cable 1
Flag 10: Parallel Bus Communication Fault on Cable 2
Flag 11: Auxiliary Bus Communication Fault
Flag 12: Parallel Bus Termination Fault on Cable 1
Flag 13: Parallel Bus Termination Fault on Cable 2
Flag 14: Auxiliary Bus Termination Fault
Flag 15: No Master Present In The Parallel System
Flag 16: Overload on a Parallel Unit
Flag 17: Parallel Configuration Fault
Flag 18: <Not Used>
Flag 19: <Not Used>
Flag 20: <Not Used>
Flag 21: <Not Used>
Flag 22: <Not Used>
Flag 23: <Not Used>
Flag 24: <Not Used>
Flag 25: <Not Used>
Flag 26: <Not Used>
Flag 27: <Not Used>
Flag 28: <Not Used>
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>
Flag 33: <Not Used>
Flag 34: <Not Used>
Flag 35: <Not Used>
Flag 36: <Not Used>
Flag 37: <Not Used>
Flag 38: <Not Used>
Flag 39: <Not Used>
Flag 40: <Not Used>
Flag 41: <Not Used>
Flag 42: <Not Used>
Flag 43: <Not Used>
Flag 44: <Not Used>
Flag 45: <Not Used>
Flag 46: <Not Used>
Flag 47: <Not Used>
Flag 48: <Not Used>
Flag 49: <Not Used>
Flag 50: <Not Used>
Flag 51: <Not Used>
Flag 52: <Not Used>
Flag 53: <Not Used>
Flag 54: <Not Used>
Flag 55: <Not Used>
Flag 56: <Not Used>
Flag 57: <Not Used>
Flag 58: <Not Used>
Flag 59: <Not Used>
Flag 60: <Not Used>
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>"
::= { upsAdvState 5 }
upsAdvStateSystemMessages OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 3 digit Decimal code
representing the current active message from the
System Message Register. Each code should remain active
for a minimum of 15 seconds. However, in the worst case
scenario, a code could be cleared after only 5 seconds.
It is recommended that this object be polled at least
once every 4 seconds in order to get the most accurate
representation of the current UPS System Message. If the
Network Card is unable to determine the value of the
System Message Register, this variable is set to
'UNKNOWN'."
::= { upsAdvState 6 }
upsAdvStateTotaltimeonbattery OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time the UPS has been in battery operation."
::= { upsAdvState 7 }
upsAdvStateTotaltimeonbypass OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time the UPS has been in bypass operation."
::= { upsAdvState 8 }
upsAdvStateTotaltimeonNormal OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time the UPS has been in normal operation."
::= { upsAdvState 9 }
upsAdvStateNumberoftimesonbattery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the UPS was on battery.
Since the last reset of statistical data."
::= { upsAdvState 10 }
upsAdvStateNumberoftimesbypass OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the UPS was in bypass.
Since the last reset of statistical data."
::= { upsAdvState 11 }
upsAdvStateNumberoftimesNormal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the UPS was in normal operation.
Since the last reset of statistical data."
::= { upsAdvState 12 }
upsAdvStateEcomode OBJECT-TYPE
SYNTAX INTEGER {
upsOnEcoMode(1),
upsNotOnEcoMode(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Eco mode status.
1: UPS is on Eco-mode
2: UPS is not on Eco-mode."
::= { upsAdvState 13 }
upsAdvStateLifeCycleManagement OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 16 flags representing the life cycle management alerts
for the device. If the Network Card is unable to determine the values of the flags,
this variable is set to 'UNKNOWN'. If the connected UPS does not use this variable,
it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 16, and read from left
to right. The bits are defined as follows:
Flag 1: End of Warranty Soon
Flag 2: Battery Check Recommended
Flag 3: Service Period On Wearing Parts Expired
Flag 4: Secure Start-up Recommended
Flag 5: Fan Life Expired
Flag 6: DC Capacitor Life Expired
Flag 7: AC Capacitor Life Expired
Flag 8: Supply Service Life Expired
Flag 9: Ups Out Of Limits Warning
Flag 10: Air Filter Life Expired
Flag 11: <Not Used>
Flag 12: <Not Used>
Flag 13: <Not Used>
Flag 14: <Not Used>
Flag 15: <Not Used>
Flag 16: <Not Used>"
::= { upsAdvState 14 }
-- the upsBasicControl group
upsBasicControlConserveBattery OBJECT-TYPE
SYNTAX INTEGER {
noTurnOffUps(1),
turnOffUpsToConserveBattery(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to turnUpsOffToConserveBattery(2)
causes a UPS on battery to be put into 'sleep' mode. The
UPS will turn back on when utility power is restored.
Attempting to turn off a UPS that is not on battery will
result in a badValue error.
Setting this value to noTurnOffUps(1) has no
effect.
The value noTurnOffUps(1) will always be returned
when the variable is read."
::= { upsBasicControl 1 }
-- the upsAdvControl group
upsAdvControlUpsOff OBJECT-TYPE
SYNTAX INTEGER {
noTurnUpsOff(1),
turnUpsOff(2),
turnUpsOffGracefully(3),
turnUpsSyncGroupOff(4),
turnUpsSyncGroupOffAfterDelay(5),
turnUpsSyncGroupOffGracefully(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to turnUpsOff(2) causes
the UPS to shut off. When in this state, the UPS
will not provide output power regardless of the input
line state.
Setting this variable to turnUpsOffGracefully(3) causes
the UPS to shut off after a delay period. This allows the
host to shut down in a graceful manner. When in this state,
the UPS will not provide output power regardless of the
input line state.
If this UPS is an active member of a Synchronized
Control Group (SCG) the turnUpsSyncGroupOff(4) command
will perform a Synchronized Turn Off of all active Group
members regardless of their current AC output status.
If this UPS is an active member of a Synchronized
Control Group (SCG) the turnUpsSyncGroupOffAfterDelay(5)
command will perform a Synchronized Turn Off After Delay
of all active Group members regardless of their current
AC output status. This unit's Shutdown Delay will be used
to execute the Turn Off After Delay command.
If this UPS is an active member of an SCG, the
turnUpsSyncGroupOffGracefully(6) command will perform a
Synchronized Turn Off Gracefully of all active Group
members regardless of their current AC output status.
This unit's Maximum Shutdown Time and Shutdown Delay will
be used to execute the Turn Off Gracefully command.
Setting this value to noTurnUpsOff(1) has no
effect.
The value noTurnUpsOff(1) will always be returned
when the variable is read."
::= { upsAdvControl 1 }
upsAdvControlRebootShutdownUps OBJECT-TYPE
SYNTAX INTEGER {
noRebootShutdownUps(1),
rebootShutdownUps(2),
rebootShutdownUpsGracefully(3),
rebootShutdownSyncGroupUps(4),
rebootShutdownSyncGroupUpsGracefully(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to rebootShutdownUps(2) causes the UPS
to shut off and turn back on (as long as good AC input power
is available, otherwise the UPS will remain off until good AC
input power is available).
Setting this variable to rebootShutdownUpsGracefully(3) causes
the UPS to shut off after a delay period and then turn back
on. This allows the host to shut down in a graceful manner.
If this UPS is an active member of a Synchronized Control
Group (SCG) the rebootShutdownSyncGroupUps(4) command will
perform a Synchronized Reboot of all active Group members
regardless of their current AC output status. If applicable,
this unit's Power Synchronization Delay, Shutdown Delay,
Return Delay, Return Battery Capacity, and Return Battery
Capacity Offset will be used to execute the Reboot command.
If this UPS is an active member of a SCG the
rebootShutdownSyncGroupUpsGracefully(5) command will perform
a Synchronized Reboot of all active Group members regardless
of their current AC output status. If applicable, this unit's
Power Synchronization Delay, Maximum Shutdown Time, Shutdown
Delay, Return Delay, Return Battery Capacity, and Return
Battery Capacity Offset will be used to execute the Reboot
command.
Setting this value to noRebootShutdownUps(1) has no effect.
The value noRebootShutdownUps(1) will always be returned when
the variable is read."
::= { upsAdvControl 2 }
upsAdvControlUpsSleep OBJECT-TYPE
SYNTAX INTEGER {
noPutUpsToSleep(1),
putUpsToSleep(2),
putUpsToSleepGracefully(3),
putUpsSyncGroupToSleep(4),
putUpsSyncGroupToSleepGracefully(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to putUpsToSleep(2) causes
the UPS to go to sleep for the time specified by
upsAdvConfigUpsSleepTime.
Setting this variable to putUpsToSleepGracefully(3)
causes the UPS to go to sleep for the time specified
by upsAdvConfigUpsSleepTime after a delay period.
This allows the host to shut down in a graceful manner.
If this UPS is an active member of a Synchronized Control
Group (SCG), the putUpsSyncGroupToSleep(4) command will perform
a Synchronized Sleep of all active Group members regardless
of their current AC output status. This unit's Power
Synchronization Delay, Shutdown Delay, Sleep Time,
and Return Delay will be used to execute the sleep command.
If this UPS is an active member of a SCG the
putUpsSyncGroupToSleepGracefully(5) command will perform a
Synchronized Sleep Gracefully of all active Group members
regardless of their current AC output status. This unit's
Power Synchronization Delay, Maximum Shutdown Time, Shutdown
Delay, Sleep Time, and Return Delay to execute the sleep
command.
When in sleep mode, the UPS will not provide output
power regardless of the input line state. Once the
specified time has elapsed, output power will be
restored.
Setting this value to noPutUpsToSleep(1) has no
effect.
The value noPutUpsToSleep(1) will always be returned
when the variable is read."
::= { upsAdvControl 3 }
upsAdvControlSimulatePowerFail OBJECT-TYPE
SYNTAX INTEGER {
noSimulatePowerFailure(1),
simulatePowerFailure(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to simulatePowerFailure(2) causes
the UPS switch to battery power.
Setting this value to noSimulatePowerFailure(1) has no
effect.
The value noSimulatePowerFailure(1) will always be returned
when the variable is read."
::= { upsAdvControl 4 }
upsAdvControlFlashAndBeep OBJECT-TYPE
SYNTAX INTEGER {
noFlashAndBeep(1),
flashAndBeep(2),
flashAndBeepSyncGroup(3),
flashAndBeepCont(4),
flashAndBeepCancel(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to flashAndBeep(2) causes the
UPS to beep and simultaneously turn on the UPS front
panel lights (Smart-UPS only).
If this UPS is an active member of a Synchronized Control
Group (SCG), the flashAndBeepSyncGroup(3) command will
Flash and Beep all active Group members regardless of
current AC output status.
Setting this value to noFlashAndBeep(1) has no
effect.
Setting this value to flashAndBeepCont (4) commandcauses
the UPS to beep and light the front panel lights until
the flashAndBeepCancel (5) command is received.
The value noFlashAndBeep(1) will always be returned
when the variable is read."
::= { upsAdvControl 5 }
upsAdvControlTurnOnUPS OBJECT-TYPE
SYNTAX INTEGER {
noTurnOnUPS(1),
turnOnUPS(2),
turnOnUPSSyncGroup(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to turnOnUPS(2) causes the
UPS to be turned on immediately.
If this UPS is an active member of a Synchronized Control
Group (SCG), the turnOnUPSSyncGroup(3) command will perform
a Synchronized Turn On of all active Group members
regardless of their current AC output status.
Setting this value to noTurnOnUPS(1) has no
effect.
The value noTurnOnUPS(1) will always be returned
when the variable is read."
::= { upsAdvControl 6 }
upsAdvControlBypassSwitch OBJECT-TYPE
SYNTAX INTEGER {
noBypassSwitch (1),
switchToBypass (2),
switchOutOfBypass(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This switch puts the UPS in or out of bypass mode."
::= { upsAdvControl 7 }
upsAdvControlRebootUpsWithOrWithoutAC OBJECT-TYPE
SYNTAX INTEGER {
noRebootUpsWithOrWithoutAC (1),
rebootUpsImmediatelyWithOrWithoutAC (2),
rebootUpsDelayedWithOrWithoutAC (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to rebootUpsImmediatelyWithOrWithoutAC (2)
causes the UPS to turn off immediately, wait for a minimum time
(typically 8 seconds), and then turn back on regardless of the
AC input power on the UPS. Any supported switched outlet
groups will be turned off immediately but will turn on based
on their individual settings (to allow on sequencing).
Setting this variable to rebootUpsDelayedWithOrWithoutAC (3)
causes the UPS to turn off after a delay period, wait for a
minimum time (typically 8 seconds), and then turn back on
regardless of the AC input power on the UPS. Any supported
switched outlet groups will be turned off and on based on their
individual settings (to allow off and/or on sequencing).
Setting this value to noRebootUpsWithOrWithoutAC (1) has no
effect.
The value noRebootUpsWithOrWithoutAC (1) will always be
returned when the variable is read."
::= { upsAdvControl 8 }
upsAdvControlFirmwareUpdate OBJECT-TYPE
SYNTAX INTEGER {
noFirmwareUpdate (1),
firmwareUpdate (2),
updateInProcess (3),
updateSuccessful (4),
updateFailed (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to firmwareUpdate(2) causes the
UPS to begin a firmware update if possible.
Setting this value to noFirmwareUpdate(1) will clear the
previous results, if any, or otherwise has no effect.
Reading this variable will return noFirmwareUpdate(1) when
the UPS firmware has not been updated (or previous results
have been cleared), updateInProcess(3) when the UPS firmware
is being updated, updateSuccessful(4) when the UPS firmware
has been successfully updated, or updateFailed(5) if the UPS
firmware update failed."
::= { upsAdvControl 9 }
-- the upsTest group
-- the upsBasicTest group
-- the upsAdvTest group
upsAdvTestDiagnosticSchedule OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
biweekly(2),
weekly(3),
atTurnOn(4),
never(5),
fourWeeks(6),
twelveWeeks(7),
biweeklySinceLastTest(8),
weeklySinceLastTest(9),
eightWeeks(10),
twentysixWeeks(11),
fiftytwoWeeks(12)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UPS system's automatic battery test schedule."
::= { upsAdvTest 1 }
upsAdvTestDiagnostics OBJECT-TYPE
SYNTAX INTEGER {
noTestDiagnostics(1),
testDiagnostics(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to testDiagnostics(2) causes
the UPS to perform a diagnostic self test.
Setting this value to noTestDiagnostics(1) has no
effect.
The value noTestDiagnostics(1) will always be returned
when the variable is read."
::= { upsAdvTest 2 }
upsAdvTestDiagnosticsResults OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
failed(2),
invalidTest(3),
testInProgress(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The results of the last UPS diagnostics test performed."
::= { upsAdvTest 3 }
upsAdvTestLastDiagnosticsDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date the last UPS diagnostics test was performed in
mm/dd/yy format."
::= { upsAdvTest 4 }
upsAdvTestRuntimeCalibration OBJECT-TYPE
SYNTAX INTEGER {
noPerformCalibration(1),
performCalibration(2),
cancelCurrentCalibration(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to performCalibration(2) causes
the UPS to discharge to calibrate the UPS.
The test will only start if the battery capacity is 100%.
The test runs until capacity is less than 25%.
Setting this variable to cancelCurrentCalibration(3)
after setting performCalibration(2) will cancel the
current discharge.
Setting this variable to noPerformCalibration(1)
will have no effect.
The value noPerformCalibration(1) will always be returned
when the variable is read.
The result of the calibration will be saved in
upsAdvTestCalibrationResult."
::= { upsAdvTest 5 }
upsAdvTestCalibrationResults OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
invalidCalibration(2),
calibrationInProgress(3),
refused(4),
aborted(5),
pending(6),
unknown(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The results of the last runtime calibration.
Value ok(1) means a successful runtime calibration.
Value invalidCalibration(2) indicates last calibration did
not take place since the battery capacity was below
100%.
Value calibrationInProgress(3) means a calibration
is occurring now.
Value refused(4) means the test was refused, it did not take place.
Value aborted(5) indicates the test started but either someone cancelled it or
the system encountered an error.
Value pending(6) the test will commence shortly. "
::= { upsAdvTest 6 }
upsAdvTestCalibrationDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date the last UPS runtime calibration was
performed in mm/dd/yy format."
::= { upsAdvTest 7 }
upsAdvTestDiagnosticTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time of the day to perform automatic battery test.
Expressed in 24 hour notation - hh:mm."
::= { upsAdvTest 8 }
upsAdvTestDiagnosticDay OBJECT-TYPE
SYNTAX INTEGER {
monday (1),
tuesday (2),
wednesday (3),
thursday (4),
friday (5),
saturday (6),
sunday (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The day of the week to perform automatic battery test."
::= { upsAdvTest 9 }
upsAdvTestBatteryInterval OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UPS system's automatic battery test period."
::= { upsAdvTest 10 }
upsAdvTestCalibrationLastSuccessfulDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The latest date when the UPS performed a successful runtime calibration test.
The format is YYYY-MM-DD"
::= { upsAdvTest 11 }
upsAdvTestBatteryLastSuccessfulDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The latest date when the UPS performed a successful battery diagnostic test (battery monitoring test).
The format is YYYY-MM-DD"
::= { upsAdvTest 12 }
upsAdvTestBatteryLastDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The latest date when the UPS performed a battery diagnostic test (battery monitoring test),
regardless of the test result.
The format is YYYY-MM-DD"
::= { upsAdvTest 13 }
upsAdvTestBatteryProcessStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
preconditionNotMeet(2),
batteryTestInProgress(3),
refused(4),
aborted(5),
pending(6),
unknown(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The results of the latest battery diagnostic test (battery monitoring test).
ok(1) indicates a successful completion of the test.
preconditionNotMeet(2) indicates that the test did not start, due to low capacity or low load.
batteryTestInProgress(3) indicates that a test is in progress.
refused(4) indicates that the test was refused and did not take place.
aborted(5) indicates that the test started but it was either cancelled or the system encountered an error.
pending(6) the test will commence shortly."
::= { upsAdvTest 14 }
upsAdvTestBatteryConditionStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
batteryOK(2),
batteryCapacityDecreased(3),
batteryDefect(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Result of the latest successful test
1 = unknown
2 = battery OK
3 = battery capacity decreased
4 = battery defect"
::= { upsAdvTest 15 }
upsAdvTestDiagnosticsBatteryInterval OBJECT-TYPE
SYNTAX INTEGER {
never(1),
weekly(2),
biweekly(3),
every4weeks(4),
every8weeks(5),
every12weeks(6),
every26weeks(7),
every52weeks(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery test is a diagnostic test (also referred to as battery monitoring test).
The test will be performed on the day stated in upsAdvTestDiagnosticDay
and at the time stated in upsAdvTestDiagnosticTime.
The result can be read in upsAdvTestBatteryConditionStatus.
1 = Never
2 = Weekly
3 = biweekly
4 = Every 4 weeks
5 = Every 8 weeks
6 = Every 12 weeks
7 = Every 26 weeks
8 = Every 52 weeks"
::= { upsAdvTest 16 }
-- the upsComm group
upsCommStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
noComm(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of agent's communication with UPS. "
::= { upsComm 1 }
-- ups (integrated) output relay table
upsOutputRelayStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of integrated output relays on the UPS."
::= { upsOutputRelays 1 }
upsOutputRelayStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSOutputRelayStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual relays."
::= { upsOutputRelays 2 }
upsOutputRelayStatusEntry OBJECT-TYPE
SYNTAX UPSOutputRelayStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relays to access."
INDEX { upsOutputRelayIndex }
::= { upsOutputRelayStatusTable 1 }
UPSOutputRelayStatusEntry ::=
SEQUENCE {
upsOutputRelayIndex INTEGER,
upsOutputRelayState INTEGER,
upsOutputRelayDetailedStatus DisplayString
}
upsOutputRelayIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the output relay entry."
::= { upsOutputRelayStatusEntry 1 }
upsOutputRelayState OBJECT-TYPE
SYNTAX INTEGER {
outputRelayNormalState (1),
outputRelayAbnormalState (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the output relay state.
1 - normal state
2 - abnormal state"
::= { upsOutputRelayStatusEntry 2 }
upsOutputRelayDetailedStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 16 flags representing
the status of the output relay.
The flags are numbered from 1 to 16, and read from left
to right. The bits are defined as follows:
Flag 1: Cause is true which makes the output relay active if not pending a condition
Flag 2: Pending delay
Flag 3: Pending peak period
Flag 4: <Not Used>
Flag 5: <Not Used>
Flag 6: <Not Used>
Flag 7: <Not Used>
Flag 8: <Not Used>
Flag 9: <Not Used>
Flag 10: <Not Used>
Flag 11: <Not Used>
Flag 12: <Not Used>
Flag 13: <Not Used>
Flag 14: <Not Used>
Flag 15: <Not Used>
Flag 16: <Not Used>"
::= { upsOutputRelayStatusEntry 3 }
upsOutputRelayConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of integrated output relays on the UPS."
::= { upsOutputRelays 3 }
upsOutputRelayConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSOutputRelayConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual relays."
::= { upsOutputRelays 4 }
upsOutputRelayConfigEntry OBJECT-TYPE
SYNTAX UPSOutputRelayConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relays to access."
INDEX { upsOutputRelayConfigIndex }
::= { upsOutputRelayConfigTable 1 }
UPSOutputRelayConfigEntry ::=
SEQUENCE {
upsOutputRelayConfigIndex INTEGER,
upsOutputRelayConfigDelay INTEGER,
upsOutputRelayConfigCause INTEGER
}
upsOutputRelayConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the output relay entry."
::= { upsOutputRelayConfigEntry 1 }
upsOutputRelayConfigDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay delay 0 - 86400 seconds."
::= { upsOutputRelayConfigEntry 2 }
upsOutputRelayConfigCause OBJECT-TYPE
SYNTAX INTEGER {
outputRelayConfigCauseNone (1),
outputRelayConfigCauseOnBatPwrFail (2),
outputRelayConfigCauseOnBatPwrFailExceptPeakPeriod (3),
outputRelayConfigCauseLoBatWhileOnBat (4),
outputRelayConfigCauseAlarm (5),
outputRelayConfigCauseFault (6),
outputRelayConfigCauseOutputOn (7),
outputRelayConfigCauseOutputOff (8),
outputRelayConfigCauseOnline (9),
outputRelayConfigCauseInBypass (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable sets what causes the output relay state to change.
1 - none
2 - on battery power failure
3 - on battery power failure expect during peak period
4 - low battery while on battery
5 - alarm
6 - fault
7 - output on
8 - output off
9 - online
10 - in bypass"
::= { upsOutputRelayConfigEntry 3 }
upsOutputRelayConfigPolarity OBJECT-TYPE
SYNTAX INTEGER{
upsOutputRelayAllRelaysEnergizedWhenTrue (1),
upsOutputRelayAllRelaysNotEnergizedWhenTrue (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures all output relays with one setting.
1 - all relays act normally open, when logic condition is true, relays are energized
2 - all relays act normally close, when logic condition is true relays are deenergized"
::= { upsOutputRelays 5 }
upsOutputRelayConfigPeakPeriod OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the peak period setting of the UPS. Flags are numbered 1-64
starting from the left. Each flag is either a '1',
representing a flag that is set, or a '0', representing
a flag that is /not/ set.
The peak period intervals are times that are both:
- on the days of the week set by the first 7 flags AND
- within the time periods set by the remaining flags.
UPS output relays triggered by 'On battery except peak period'
will not signal when the UPS is on battery during a peak period.
The flags are defined as follows:
Flag 1: Sunday
Flag 2: Monday
Flag 3: Tuesday
Flag 4: Wednesday
Flag 5: Thursday
Flag 6: Friday
Flag 7: Saturday
Flag 8: 00:00-00:29
Flag 9: 00:30-00:59
Flag 10: 01:00-01:29
Flag 11: 01:30-01:59
Flag 12: 02:00-02:29
Flag 13: 02:30-02:59
Flag 14: 03:00-03:29
Flag 15: 03:30-03:59
Flag 16: 04:00-04:29
Flag 17: 04:30-04:59
Flag 18: 05:00-05:29
Flag 19: 05:30-05:59
Flag 20: 06:00-06:29
Flag 21: 06:30-06:59
Flag 22: 07:00-07:29
Flag 23: 07:30-07:59
Flag 24: 08:00-08:29
Flag 25: 08:30-08:59
Flag 26: 09:00-09:29
Flag 27: 09:30-09:59
Flag 28: 10:00-00:29
Flag 29: 10:30-10:59
Flag 30: 11:00-11:29
Flag 31: 11:30-11:59
Flag 32: 12:00-12:29
Flag 33: 12:30-12:59
Flag 34: 13:00-13:29
Flag 35: 13:30-13:59
Flag 36: 14:00-14:29
Flag 37: 14:30-14:59
Flag 38: 15:00-15:29
Flag 39: 15:30-15:59
Flag 40: 16:00-16:29
Flag 41: 16:30-16:59
Flag 42: 17:00-17:29
Flag 43: 17:30-17:59
Flag 44: 18:00-18:29
Flag 45: 18:30-18:59
Flag 46: 19:00-19:29
Flag 47: 19:30-19:59
Flag 48: 20:00-20:29
Flag 49: 20:30-20:59
Flag 50: 21:00-21:29
Flag 51: 21:30-21:59
Flag 52: 22:00-22:29
Flag 53: 22:30-22:59
Flag 54: 23:00-23:29
Flag 55: 23:30-23:59
Flag 56: <Not Used>
Flag 57: <Not Used>
Flag 58: <Not Used>
Flag 59: <Not Used>
Flag 60: <Not Used>
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>
To set this OID you can either:
- set the 64 flag bits as an ASCII string of '1's and '0's
as described above. The same format is used when this OID
is read.
- or turn on/off an individual flags.
Examples:
Set for Sundays and Tuesdays from 00:00-01:29:
1010000111000000000000000000000000000000000000000000000000000000
Set Mondays to be part of the peak periods:
+2
Set Tuesdays to not be part of the peak periods:
-3
Include interval 23:30-23:59 in the peak period:
+55"
::= { upsOutputRelays 6 }
upsInputContactStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of integrated input contacts on the UPS."
::= { upsInputContacts 1 }
upsInputContactStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsInputContactStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual contacts."
::= { upsInputContacts 2 }
upsInputContactStatusEntry OBJECT-TYPE
SYNTAX UpsInputContactStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contacts to access."
INDEX { upsInputContactIndex }
::= { upsInputContactStatusTable 1 }
UpsInputContactStatusEntry ::=
SEQUENCE {
upsInputContactIndex INTEGER,
upsInputContactState INTEGER
}
upsInputContactIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the input contact entry."
::= { upsInputContactStatusEntry 1 }
upsInputContactState OBJECT-TYPE
SYNTAX INTEGER {
upsInputContactNormalState (1),
upsInputContactAbnormalState (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the input contact state.
1 - normal state
2 - abnormal state"
::= { upsInputContactStatusEntry 2 }
upsInputContactConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of integrated input contacts on the UPS."
::= { upsInputContacts 3 }
upsInputContactConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsInputContactConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual contacts."
::= { upsInputContacts 4 }
upsInputContactConfigEntry OBJECT-TYPE
SYNTAX UpsInputContactConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contacts to access."
INDEX { upsInputContactConfigIndex }
::= { upsInputContactConfigTable 1 }
UpsInputContactConfigEntry ::=
SEQUENCE {
upsInputContactConfigIndex INTEGER,
upsInputContactConfigAction INTEGER
}
upsInputContactConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the input contact entry."
::= { upsInputContactConfigEntry 1 }
upsInputContactConfigAction OBJECT-TYPE
SYNTAX INTEGER {
upsInputContactConfigActionNone (1),
upsInputContactConfigActionSelfTest (2),
upsInputContactConfigActionExternalAlarmOn (3),
upsInputContactConfigActionExternalAlarmOff (4),
upsInputContactConfigActionOutputOffNoDelay (5),
upsInputContactConfigActionOutputOn (6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the input contact changes state, this action occurs.
1 - none
2 - self test
3 - external alarm on
4 - external alarm off
5 - output off no delay
6 - output on"
::= { upsInputContactConfigEntry 2 }
upsInputContactConfigPolarity OBJECT-TYPE
SYNTAX INTEGER{
upsInputContactAllContactsClosedEqualsTrue (1),
upsInputContactAllContactsOpenEqualsTrue (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures all input contacts with one setting.
1 - all contacts act as normally open
2 - all contacts act as normally closed"
::= { upsInputContacts 5 }
-- upsServiceInfo subgroup
-- the upsServiceBatteryInfo subgroup
-- Don't want to expose Ups Service information data to customer.
-- Always be in experimental.
-- upsECOmode subgroup
upsEcoModeFreqTransferRange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates tolerance of bypass AC frequency in Hz to switch on ECO mode."
::= { upsECOmode 1 }
upsEcoModeHighVoltThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates high threshold on AC voltage in volts to switch on ECO mode."
::= { upsECOmode 2 }
upsEcoModeLowVoltThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates low threshold on AC voltage in volts to switch on ECO mode."
::= { upsECOmode 3 }
upsEcoModeSetting OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether ECO feature is avaiable to this UPS or not."
::= { upsECOmode 4 }
upsEcoModeStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether UPS is running in ECO mode or not."
::= { upsECOmode 5 }
upsEcoModeCountSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times UPS entered into ECO mode since maintenance reset."
::= { upsECOmode 6 }
upsEcoModeOnlineSinceCommission OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime in online mode with ECO feature enabled once product is authorized to use (in minutes)."
::= { upsECOmode 7 }
upsEcoModeOnlineSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime in online mode with ECO feature enabled since maintenance reset (in minutes)."
::= { upsECOmode 8 }
upsEcoModeTotalPercentTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates percentage of runtime in ECO mode since maintenance reset."
::= { upsECOmode 9 }
upsEcoModePercentTimeSinceCommission OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates percentage of operation time in ECO mode once product is authorized to use."
::= { upsECOmode 10 }
upsEcoModeTotalTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime of UPS in ECO mode since maintenance reset (in minutes)."
::= { upsECOmode 11 }
upsEcoModeTotalTimeSinceCommission OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime in ECO mode once product is authorized to use (in minutes)."
::= { upsECOmode 12 }
upsEcoModeTotalTimeInMonth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime of UPS in ECO mode since beginning of month (in minutes)."
::= { upsECOmode 13 }
-- upsEBMmode subgroup
upsEbmModeSetting OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether efficiency booster mode feature is avaiable to this UPS or not."
::= { upsEBMmode 1 }
upsEbmModeStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether UPS is running on EBM mode or not."
::= { upsEBMmode 2 }
upsEbmModeCountSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times UPS entered into efficiency booster mode since maintenance reset."
::= { upsEBMmode 3 }
upsEbmModeTotalTimeInMonth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime of UPS in efficiency booster mode since beginning of month (in minutes)."
::= { upsEBMmode 4 }
upsEbmModeTotalTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime of UPS in efficiency booster mode since maintenance reset (in minutes)."
::= { upsEBMmode 5 }
upsEbmModeTotalPercentTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates percentage of runtime in efficiency booster mode since maintenance reset."
::= { upsEBMmode 6 }
upsEbmModeOnlineSinceCommission OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates runtime in online mode with EBM feature enabled once product is authorized to use (in minutes)."
::= { upsEBMmode 7 }
upsEbmModePercentTimeSinceCommission OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates percentage of operation time in efficiency booster mode once product is authorized to use."
::= { upsEBMmode 8 }
upsEbmModeRuntimeSinceCommission OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime in efficiency booster mode once product is authorized to use (in minutes)."
::= { upsEBMmode 9 }
upsEbmModeOnlineSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total runtime in online mode with EBM feature enabled since maintenance reset (in minutes)."
::= { upsEBMmode 10 }
upsEbmModeUpsCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of UPS's running in efficiency booster mode."
::= { upsEBMmode 11 }
-- upsBatteryStats group
upsBatteryStatsReset OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(3) will reset the Battery Stats timer.
Getting this OID will return:
notSupported(1) - reset feature is not supported.
noOperation(2) - indicates reset is supported, does nothing."
::= { upsBatteryStats 1 }
upsBatteryStatsTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time since battery timer reset (in minutes)."
::= { upsBatteryStats 2 }
upsBatteryStatsTimeOnBattery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time for UPS in battery operation (in minutes)."
::= { upsBatteryStats 3 }
-- upsOperationalStats group
upsOpStatsReset OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(3) will reset the Operational Stats timer.
Getting this OID will return:
notSupported(1) - reset feature is not supported.
noOperation(2) - indicates reset is supported, does nothing."
::= { upsOperationalStats 1 }
upsOpStatsTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time since timer reset (in minutes)."
::= { upsOperationalStats 2 }
upsOpStatsTimeInNormalOperation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time for UPS in normal operation since timer reset via upsOpStatsReset (in minutes)."
::= { upsOperationalStats 3 }
upsOpStatsTimeInBypassOperation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time for UPS in bypass operation since timer reset via upsOpStatsReset (in minutes)."
::= { upsOperationalStats 4 }
upsOpStatsTimeInECOmodeOperation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time for UPS in ECO mode since timer reset via upsOpStatsReset (in minutes)."
::= { upsOperationalStats 5 }
upsOpStatsTimeInECOnversionOperation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total time for UPS in ECOnversion since timer reset via upsOpStatsReset (in minutes)."
::= { upsOperationalStats 6 }
-- upsEnergyEfficiencyStats group
upsEnergyEfficiencyStatsReset OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(3) will reset the Energy Efficiency Stats timer.
Getting this OID will return:
notSupported(1) - reset feature is not supported.
noOperation(2) - indicates reset is supported, does nothing."
::= { upsEnergyEfficiencyStats 1 }
upsEnergyEfficiencyStatsOutputEnergyTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time (in minutes) since last timer reset of the OID upsEnergyEfficiencyStatsOutputEnergyUsage"
::= { upsEnergyEfficiencyStats 2 }
upsEnergyEfficiencyStatsTimeInECOmode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time (in minutes) for UPS in ECO mode since last timer reset via upsEnergyEfficiencyStatsReset"
::= { upsEnergyEfficiencyStats 3 }
upsEnergyEfficiencyStatsTimeInECOnversion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time (in minutes) for UPS in ECOnversion since last timer reset via upsEnergyEfficiencyStatsReset"
::= { upsEnergyEfficiencyStats 4 }
upsEnergyEfficiencyStatsInputEnergyUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input energy usage of the UPS in kWh since timer reset."
::= { upsEnergyEfficiencyStats 5 }
upsEnergyEfficiencyStatsOutputEnergyUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output energy usage of the UPS in kWh since timer reset."
::= { upsEnergyEfficiencyStats 6 }
upsEnergyEfficiencyStatsInputEnergyTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time (in minutes) since last timer reset of the OID upsEnergyEfficiencyStatsInputEnergyUsage"
::= { upsEnergyEfficiencyStats 7 }
upsEnergyEfficiencyStatsECOmodeTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Time (in minutes) since last timer reset of the OID upsEnergyEfficiencyStatsTimeInECOmode"
::= { upsEnergyEfficiencyStats 8 }
upsEnergyEfficiencyStatsECOnversionTimeSinceReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Time (in minutes) since last timer reset of the OID upsEnergyEfficiencyStatsTimeInECOnversion"
::= { upsEnergyEfficiencyStats 9 }
-- the measureUps group
-- the Environ group
mUpsEnvironAmbientTemperature OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ambient temperature in Celsius for Probe 1."
::= { mUpsEnviron 1 }
mUpsEnvironRelativeHumidity OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The relative humidity as a percentage for Probe 1."
::= { mUpsEnviron 2 }
mUpsEnvironAmbientTemperature2 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ambient temperature in Celsius for Probe 2."
::= { mUpsEnviron 3 }
mUpsEnvironRelativeHumidity2 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The relative humidity as a percentage for Probe 2."
::= { mUpsEnviron 4 }
-- the mUpsContact group
mUpsContactNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts supported by the Measure-UPS."
::= { mUpsContact 1 }
mUpsContactTable OBJECT-TYPE
SYNTAX SEQUENCE OF MUpsContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the Measure-UPS."
::= { mUpsContact 2 }
mUpsContactEntry OBJECT-TYPE
SYNTAX MUpsContactEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A contact entry containing information for a given contact."
INDEX { contactNumber }
::= { mUpsContactTable 1 }
MUpsContactEntry ::=
SEQUENCE {
contactNumber
INTEGER,
normalState
INTEGER,
description
DisplayString,
monitoringStatus
INTEGER,
currentStatus
INTEGER
}
contactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index identifying the contact on the Measure-UPS."
::= { mUpsContactEntry 1 }
normalState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
open(2),
closed(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal operating position of the contact. If the normal
operating position cannot be set then it is controlled via the
dip switch on the Measure-UPS and is therefore read-only."
::= { mUpsContactEntry 2 }
description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the purpose/use of the contact."
::= { mUpsContactEntry 3 }
monitoringStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
enabled(2),
disabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A flag indicating whether this contact is
monitored, or not."
::= { mUpsContactEntry 4 }
currentStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
noFault(2),
fault(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the contact.
If the contact is not in its normal state. This value
is set to fault(2)."
::= { mUpsContactEntry 5 }
-- Three Phase Group
--
-- Reset Max/Min Values Group
--
upsPhaseResetMaxMinValues OBJECT-TYPE
SYNTAX INTEGER {
none (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the maximum and minimum UPS values:
upsPhaseInputMaxVoltage, upsPhaseInputMinVoltage,
upsPhaseInputMaxCurrent, upsPhaseInputMinCurrent,
upsPhaseInputMaxPower, upsPhaseInputMinPower,
upsPhaseOutputMaxCurrent, upsPhaseOutputMinCurrent,
upsPhaseOutputMaxLoad, upsPhaseOutputMinLoad,
upsPhaseOutputMaxPercentLoad, upsPhaseOutputMinPercentLoad,
upsPhaseOutputMaxPower, upsPhaseOutputMinPower,
upsPhaseOutputMaxPercentPower, upsPhaseOutputMinPercentPower."
::= { upsPhaseResetValues 1 }
--
-- Input Group
--
-- Number of Inputs
upsPhaseNumInputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input feeds to this device.
This variable indicates the number of rows in the
input table."
::= { upsPhaseInput 1 }
-- Input Table
upsPhaseInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsPhaseInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the value of upsPhaseNumInputs."
::= { upsPhaseInput 2 }
upsPhaseInputEntry OBJECT-TYPE
SYNTAX UpsPhaseInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input."
INDEX { upsPhaseInputTableIndex }
::= { upsPhaseInputTable 1 }
UpsPhaseInputEntry ::= SEQUENCE {
upsPhaseInputTableIndex INTEGER,
upsPhaseNumInputPhases INTEGER,
upsPhaseInputVoltageOrientation INTEGER,
upsPhaseInputFrequency INTEGER,
upsPhaseInputType INTEGER,
upsPhaseInputName DisplayString
}
upsPhaseInputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { upsPhaseInputEntry 1 }
upsPhaseNumInputPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input phases utilized in this
device. The sum of all the upsPhaseNumInputPhases
variable indicates the number of rows in the
input phase table."
::= { upsPhaseInputEntry 2 }
upsPhaseInputVoltageOrientation OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
singlePhase(2),
splitPhase(3),
threePhasePhaseToNeutral(4),
threePhasePhaseToPhase(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage orientation:
1: unknown for this UPS
2: singlePhase - phase 1 voltage is between Phase 1
and Neutral.
3: splitPhase - phase 1 voltage is between Phase 1 and
Neutral; phase 2 voltage is between Phase 2 and Neutral;
phase 3 voltage is between Phase 1 and Phase 2.
4: threePhasePhaseToNeutral - phase 1 voltage is between
Phase 1 and Neutral; phase 2 voltage is between Phase 2
and Neutral; phase 3 voltage is between Phase 3 and
Neutral.
5: threePhasePhaseToPhase - phase 1 voltage is between
Phase 1 and Phase 2; phase 2 voltage is between Phase 2
and Phase 3; phase 3 voltage is between Phase 3 and
Phase 1."
::= { upsPhaseInputEntry 3 }
upsPhaseInputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input frequency in 0.1 Hertz, or -1 if it's unsupported
by this UPS."
::= { upsPhaseInputEntry 4 }
upsPhaseInputType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
main(2),
bypass(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input type."
::= { upsPhaseInputEntry 5 }
upsPhaseInputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A name given to a particular input."
::= { upsPhaseInputEntry 6 }
-- Input Phase Table
upsPhaseInputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsPhaseInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the sum of the upsPhaseNumInputPhases."
::= { upsPhaseInput 3 }
upsPhaseInputPhaseEntry OBJECT-TYPE
SYNTAX UpsPhaseInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input phase."
INDEX { upsPhaseInputPhaseTableIndex, upsPhaseInputPhaseIndex }
::= { upsPhaseInputPhaseTable 1 }
UpsPhaseInputPhaseEntry ::= SEQUENCE {
upsPhaseInputPhaseTableIndex INTEGER,
upsPhaseInputPhaseIndex INTEGER,
upsPhaseInputVoltage INTEGER,
upsPhaseInputMaxVoltage INTEGER,
upsPhaseInputMinVoltage INTEGER,
upsPhaseInputCurrent INTEGER,
upsPhaseInputMaxCurrent INTEGER,
upsPhaseInputMinCurrent INTEGER,
upsPhaseInputPower INTEGER,
upsPhaseInputMaxPower INTEGER,
upsPhaseInputMinPower INTEGER,
upsPhaseInputApparentPower INTEGER,
upsPhaseInputPowerFactor INTEGER,
upsPhaseInputVoltagePN INTEGER
}
upsPhaseInputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { upsPhaseInputPhaseEntry 1 }
upsPhaseInputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input phase identifier."
::= { upsPhaseInputPhaseEntry 2 }
upsPhaseInputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage in VAC, or -1 if it's unsupported
by this UPS."
::= { upsPhaseInputPhaseEntry 3 }
upsPhaseInputMaxVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum input voltage in VAC measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseInputPhaseEntry 4 }
upsPhaseInputMinVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum input voltage in VAC measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseInputPhaseEntry 5 }
upsPhaseInputCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input current in 0.1 amperes, or -1 if it's
unsupported by this UPS."
::= { upsPhaseInputPhaseEntry 6 }
upsPhaseInputMaxCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum input current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseInputPhaseEntry 7 }
upsPhaseInputMinCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum input current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseInputPhaseEntry 8 }
upsPhaseInputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input power in Watts, or -1 if it's unsupported
by this UPS."
::= { upsPhaseInputPhaseEntry 9 }
upsPhaseInputMaxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum input power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseInputPhaseEntry 10 }
upsPhaseInputMinPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum input power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseInputPhaseEntry 11 }
upsPhaseInputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input apparent power of the UPS in kVA."
::= { upsPhaseInputPhaseEntry 12 }
upsPhaseInputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input power factor measured in hundredth."
::= { upsPhaseInputPhaseEntry 13 }
upsPhaseInputVoltagePN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage measured across Phase to Neutral in VAC, or -1 if it's unsupported
by this UPS."
::= { upsPhaseInputPhaseEntry 14 }
--
-- The Output group.
--
-- Number of Outputs
upsPhaseNumOutputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output feeds to this device.
This variable indicates the number of rows in the
output table."
::= { upsPhaseOutput 1 }
-- Output Table
upsPhaseOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsPhaseOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of entries
is given by the value of upsOutputNumPhases."
::= { upsPhaseOutput 2 }
upsPhaseOutputEntry OBJECT-TYPE
SYNTAX UpsPhaseOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { upsPhaseOutputTableIndex }
::= { upsPhaseOutputTable 1 }
UpsPhaseOutputEntry ::= SEQUENCE {
upsPhaseOutputTableIndex INTEGER,
upsPhaseNumOutputPhases INTEGER,
upsPhaseOutputVoltageOrientation INTEGER,
upsPhaseOutputFrequency INTEGER
}
upsPhaseOutputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { upsPhaseOutputEntry 1 }
upsPhaseNumOutputPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output phases utilized in this
device. The sum of all the upsPhaseNumOutputPhases
variable indicates the number of rows in the
output phase table."
::= { upsPhaseOutputEntry 2 }
upsPhaseOutputVoltageOrientation OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
singlePhase(2),
splitPhase(3),
threePhasePhaseToNeutral(4),
threePhasePhaseToPhase(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage orientation:
1: unknown for this UPS
2: singlePhase - phase 1 voltage is between Phase 1
and Neutral.
3: splitPhase - phase 1 voltage is between Phase 1 and
Neutral; phase 2 voltage is between Phase 2 and Neutral;
phase 3 voltage is between Phase 1 and Phase 2.
4: threePhasePhaseToNeutral - phase 1 voltage is between
Phase 1 and Neutral; phase 2 voltage is between Phase 2
and Neutral; phase 3 voltage is between Phase 3 and
Neutral.
5: threePhasePhaseToPhase - phase 1 voltage is between
Phase 1 and Phase 2; phase 2 voltage is between Phase 2
and Phase 3; phase 3 voltage is between Phase 3 and
Phase 1."
::= { upsPhaseOutputEntry 3 }
upsPhaseOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output frequency in 0.1 Hertz, or -1 if it's
unsupported by this UPS."
::= { upsPhaseOutputEntry 4 }
-- Output Phase Table
upsPhaseOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsPhaseOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of
entries is given by the sum of the upsPhaseNumOutputPhases."
::= { upsPhaseOutput 3 }
upsPhaseOutputPhaseEntry OBJECT-TYPE
SYNTAX UpsPhaseOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output phase."
INDEX { upsPhaseOutputPhaseTableIndex, upsPhaseOutputPhaseIndex }
::= { upsPhaseOutputPhaseTable 1 }
UpsPhaseOutputPhaseEntry ::= SEQUENCE {
upsPhaseOutputPhaseTableIndex INTEGER,
upsPhaseOutputPhaseIndex INTEGER,
upsPhaseOutputVoltage INTEGER,
upsPhaseOutputCurrent INTEGER,
upsPhaseOutputMaxCurrent INTEGER,
upsPhaseOutputMinCurrent INTEGER,
upsPhaseOutputLoad INTEGER,
upsPhaseOutputMaxLoad INTEGER,
upsPhaseOutputMinLoad INTEGER,
upsPhaseOutputPercentLoad INTEGER,
upsPhaseOutputMaxPercentLoad INTEGER,
upsPhaseOutputMinPercentLoad INTEGER,
upsPhaseOutputPower INTEGER,
upsPhaseOutputMaxPower INTEGER,
upsPhaseOutputMinPower INTEGER,
upsPhaseOutputPercentPower INTEGER,
upsPhaseOutputMaxPercentPower INTEGER,
upsPhaseOutputMinPercentPower INTEGER,
upsPhaseOutputPowerFactor INTEGER,
upsPhaseOutputApparentPower INTEGER,
upsPhaseOutputInverterVoltage INTEGER,
upsPhaseOutputVoltagePN INTEGER
}
upsPhaseOutputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { upsPhaseOutputPhaseEntry 1 }
upsPhaseOutputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output phase identifier."
::= { upsPhaseOutputPhaseEntry 2 }
upsPhaseOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage in VAC, or -1 if it's unsupported
by this UPS."
::= { upsPhaseOutputPhaseEntry 3 }
upsPhaseOutputCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current in 0.1 amperes drawn
by the load on the UPS, or -1 if it's unsupported
by this UPS."
::= { upsPhaseOutputPhaseEntry 4 }
upsPhaseOutputMaxCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 5 }
upsPhaseOutputMinCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 6 }
upsPhaseOutputLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output load in VA, or -1 if it's unsupported
by this UPS."
::= { upsPhaseOutputPhaseEntry 7 }
upsPhaseOutputMaxLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output load in VA measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 8 }
upsPhaseOutputMinLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output load in VA measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 9 }
upsPhaseOutputPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the UPS load capacity in VA at
redundancy @ (n + x) presently being used on this
output phase, or -1 if it's unsupported by this UPS."
::= { upsPhaseOutputPhaseEntry 10 }
upsPhaseOutputMaxPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the UPS load capacity in
VA measured at redundancy @ (n + x) presently
being used on this output phase since the last reset
(upsPhaseResetMaxMinValues), or -1 if it's unsupported
by this UPS. Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 11 }
upsPhaseOutputMinPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum percentage of the UPS load capacity in
VA measured at redundancy @ (n + x) presently
being used on this output phase since the last reset
(upsPhaseResetMaxMinValues), or -1 if it's unsupported
by this UPS. Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 12 }
upsPhaseOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output power in Watts, or -1 if it's
unsupported by this UPS."
::= { upsPhaseOutputPhaseEntry 13 }
upsPhaseOutputMaxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 14 }
upsPhaseOutputMinPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or
-1 if it's unsupported by this UPS.
Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 15 }
upsPhaseOutputPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the UPS power capacity in Watts at
redundancy @ (n + x) presently being used on this
output phase, or -1 if it's unsupported by this UPS."
::= { upsPhaseOutputPhaseEntry 16 }
upsPhaseOutputMaxPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the UPS power capacity
in Watts measured at redundancy @ (n + x) presently
being used on this output phase since the last
reset (upsPhaseResetMaxMinValues), or -1 if it's
unsupported by this UPS. Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 17 }
upsPhaseOutputMinPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the UPS power capacity
in Watts measured at redundancy @ (n + x) presently
being used on this output phase since the last
reset (upsPhaseResetMaxMinValues), or -1 if it's
unsupported by this UPS. Sampled every 30 seconds."
::= { upsPhaseOutputPhaseEntry 18 }
upsPhaseOutputPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Output power factor of the UPS in hundredth."
::= { upsPhaseOutputPhaseEntry 19 }
upsPhaseOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apparent power in kVA"
::= { upsPhaseOutputPhaseEntry 20 }
upsPhaseOutputInverterVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Output voltage in VAC measured at the output of inverter."
::= { upsPhaseOutputPhaseEntry 21 }
upsPhaseOutputVoltagePN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage measured across Phase to Neutral in VAC, or -1 if it's unsupported
by this UPS."
::= { upsPhaseOutputPhaseEntry 22 }
-- the upsOutletGroupStatus group
upsOutletGroupStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outlet groups for the UPS."
::= { upsOutletGroupStatus 1 }
upsOutletGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsOutletGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting status of the outlet groups. The number of
entries is contained in the upsOutletGroupStatusTableSize OID."
::= { upsOutletGroupStatus 2 }
upsOutletGroupStatusEntry OBJECT-TYPE
SYNTAX UpsOutletGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlet group status to get."
INDEX { upsOutletGroupStatusIndex}
::= { upsOutletGroupStatusTable 1 }
UpsOutletGroupStatusEntry ::=
SEQUENCE {
upsOutletGroupStatusIndex INTEGER,
upsOutletGroupStatusName DisplayString,
upsOutletGroupStatusGroupState INTEGER,
upsOutletGroupStatusCommandPending INTEGER,
upsOutletGroupStatusOutletType INTEGER,
upsOutletGroupStatusGroupFullState DisplayString
}
upsOutletGroupStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet group entry."
::= { upsOutletGroupStatusEntry 1 }
upsOutletGroupStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet group. This OID is provided
for informational purposes only. This value is set
by the upsOutletGroupConfigName OID."
::= { upsOutletGroupStatusEntry 2 }
upsOutletGroupStatusGroupState OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupStatusOn (1),
upsOutletGroupStatusOff (2),
upsOutletGroupStatusUnknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet group state. If the outlet
group is on, the upsOutletGroupStatusOn (1) value will be returned. If
the outlet group is off, the upsOutletGroupStatusOff (2) value will be
returned. If the state of the outlet group cannot be determined, the
upsOutletGroupStatusUnknown (3) value will be returned."
::= { upsOutletGroupStatusEntry 3 }
upsOutletGroupStatusCommandPending OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupCommandPending (1),
upsOutletGroupNoCommandPending (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the command pending
state of the outlet group. If a command is pending on the
outlet group, the upsOutletGroupCommandPending (1) value
will be returned. If there is not a command pending
on the outlet group, the upsOutletGroupNoCommandPending (2)
will be returned."
::= { upsOutletGroupStatusEntry 4 }
upsOutletGroupStatusOutletType OBJECT-TYPE
SYNTAX INTEGER {
upsSwitchedOutletGroup (1),
upsMainOutletGroup (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is
'unswitched' and must be on in order for any of the switched
outlet groups to be on. Conversely, if the main outlet group
is off, all the switched outlet groups must also be off.
Therefore, any commands made to the main outlet group that
turn it off will also be applied to all switched outlet
groups that are on, unless the state of a switched outlet
group prevents it, in which case the command will fail."
::= { upsOutletGroupStatusEntry 5 }
upsOutletGroupStatusGroupFullState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 32 flags representing the
current state(s) of the outlet group. If the Network Card
is unable to determine the state of the outlet group, this
variable is set to 'UNKNOWN'.
The flags are numbered from 1 to 32, and read from left to
right. The flags are defined as follows:
Flag 1: On
Flag 2: Off
Flag 3: Reboot in Progress
Flag 4: Shutdown in Progress
Flag 5: Sleep in Progress
Flag 6: <Not Used>
Flag 7: <Not Used>
Flag 8: Pending Load Shed
Flag 9: Pending On Delay
Flag 10: Pending Off Delay
Flag 11: Pending AC Presence
Flag 12: Pending On Minimum Runtime
Flag 13: Member Group Process 1
Flag 14: Member Group Process 2
Flag 15: Runtime Below Turn On Setting
Flag 16: <Not Used>
Flag 17: <Not Used>
Flag 18: <Not Used>
Flag 19: <Not Used>
Flag 20: <Not Used>
Flag 21: <Not Used>
Flag 22: <Not Used>
Flag 23: <Not Used>
Flag 24: <Not Used>
Flag 25: <Not Used>
Flag 26: <Not Used>
Flag 27: <Not Used>
Flag 28: <Not Used>
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>"
::= { upsOutletGroupStatusEntry 6 }
-- the upsOutletGroupConfig group
upsOutletGroupConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outlet groups for the UPS."
::= { upsOutletGroupConfig 1 }
upsOutletGroupConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsOutletGroupConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The list of outlet groups to configure. The number of entries
is defined by the upsOutletGroupConfigTableSize OID."
::= { upsOutletGroupConfig 2 }
upsOutletGroupConfigEntry OBJECT-TYPE
SYNTAX UpsOutletGroupConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlet groups to configure."
INDEX { upsOutletGroupConfigIndex}
::= { upsOutletGroupConfigTable 1 }
UpsOutletGroupConfigEntry ::=
SEQUENCE {
upsOutletGroupConfigIndex INTEGER,
upsOutletGroupConfigName DisplayString,
upsOutletGroupConfigPowerOnDelay INTEGER,
upsOutletGroupConfigPowerOffDelay INTEGER,
upsOutletGroupConfigRebootDuration INTEGER,
upsOutletGroupConfigMinReturnRuntime INTEGER,
upsOutletGroupConfigOutletType INTEGER,
upsOutletGroupConfigLoadShedControlSkipOffDelay INTEGER,
upsOutletGroupConfigLoadShedControlAutoRestart INTEGER,
upsOutletGroupConfigLoadShedControlTimeOnBattery INTEGER,
upsOutletGroupConfigLoadShedControlRuntimeRemaining INTEGER,
upsOutletGroupConfigLoadShedControlInOverload INTEGER,
upsOutletGroupConfigLoadShedTimeOnBattery INTEGER,
upsOutletGroupConfigLoadShedRuntimeRemaining INTEGER
}
upsOutletGroupConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet group entry."
::= { upsOutletGroupConfigEntry 1 }
upsOutletGroupConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the outlet group."
::= { upsOutletGroupConfigEntry 2 }
upsOutletGroupConfigPowerOnDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (seconds) the outlet group will delay
powering on when the delayed on, reboot, or shutdown command is
applied. Allowed values vary by UPS model. The value of -1 is
used for Never if supported by the UPS and the outlet group."
::= { upsOutletGroupConfigEntry 3 }
upsOutletGroupConfigPowerOffDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (seconds) the outlet group will delay
powering off when the delayed off, reboot, or shutdown command is
applied. Allowed values vary by UPS model. The value of -1 is
used for Never if supported by the UPS and the outlet group."
::= { upsOutletGroupConfigEntry 4 }
upsOutletGroupConfigRebootDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait
(seconds) after turning the power off, at the start
of the sequence, before initiating the power on sequence.
Allowed values vary by UPS model."
::= { upsOutletGroupConfigEntry 5 }
upsOutletGroupConfigMinReturnRuntime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In an Outlet Group shutdown sequence, the Outlet Group cycles
power off then on. This OID defines the minimum amount of UPS
runtime (seconds) that is required in order to power the
Outlet Group on. Allowed values vary by UPS model."
::= { upsOutletGroupConfigEntry 6 }
upsOutletGroupConfigOutletType OBJECT-TYPE
SYNTAX INTEGER {
upsSwitchedOutletGroup (1),
upsMainOutletGroup (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is
'unswitched' and must be on in order for any of the switched
outlet groups to be on. Conversely, if the main outlet group
is off, all the switched outlet groups must also be off.
Therefore, any commands made to the main outlet group that
turn it off will also be applied to all switched outlet
groups that are on, unless the state of a switched outlet
group prevents it, in which case the command will fail."
::= { upsOutletGroupConfigEntry 7 }
upsOutletGroupConfigLoadShedControlSkipOffDelay OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupConfigSkipOffDelay (1),
upsOutletGroupConfigUseOffDelay (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures whether the outlet group's off delay setting
(upsOutletGroupConfigPowerOffDelay) will be used in a load
shedding situation, where applicable."
::= { upsOutletGroupConfigEntry 8 }
upsOutletGroupConfigLoadShedControlAutoRestart OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupConfigAutoRestart (1),
upsOutletGroupConfigManualRestart (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures whether the outlet group will automatically restart
after a load shedding situation, where applicable."
::= { upsOutletGroupConfigEntry 9 }
upsOutletGroupConfigLoadShedControlTimeOnBattery OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupConfigDisableTimeOnBatteryLoadShed (1),
upsOutletGroupConfigEnableTimeOnBatteryLoadShed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures whether the outlet group will load shed (turn off)
after the UPS's time on battery has exceeded the
upsOutletGroupConfigLoadShedTimeOnBattery OID setting. The
settings for upsOutletGroupConfigLoadShedControlSkipOffDelay
and upsOutletGroupConfigLoadShedControlAutoRestart are valid
for this load shed condition."
::= { upsOutletGroupConfigEntry 10 }
upsOutletGroupConfigLoadShedControlRuntimeRemaining OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupConfigDisableRuntimeRemainingLoadShed (1),
upsOutletGroupConfigEnableRuntimeRemainingLoadShed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures whether the outlet group will load shed (turn off)
when the UPS is on battery and the remaining runtime is less
than the upsOutletGroupConfigLoadShedRuntimeRemaining OID
setting. The settings for
upsOutletGroupConfigLoadShedControlSkipOffDelay and
upsOutletGroupConfigLoadShedControlAutoRestart are valid for
this load shed condition."
::= { upsOutletGroupConfigEntry 11 }
upsOutletGroupConfigLoadShedControlInOverload OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupConfigDisableInOverloadLoadShed (1),
upsOutletGroupConfigEnableInOverloadLoadShed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures whether the outlet group will load shed (turn off)
when the UPS is in an overload condition. The setting for
upsOutletGroupConfigLoadShedControlSkipOffDelay is valid for
this load shed condition. Returns -1 if not supported by this
outlet group."
::= { upsOutletGroupConfigEntry 12 }
upsOutletGroupConfigLoadShedTimeOnBattery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the UPS has been on battery for more time than this
value, the outlet group will turn off if this condition is
enabled by the upsOutletGroupConfigLoadShedControlTimeOnBattery
OID. Allowed values vary by UPS model."
::= { upsOutletGroupConfigEntry 13 }
upsOutletGroupConfigLoadShedRuntimeRemaining OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the runtime remaining is less than this value, the outlet
group will turn off if this condition is enabled by the
upsOutletGroupConfigLoadShedControlRuntimeRemaining OID.
Allowed values vary by UPS model."
::= { upsOutletGroupConfigEntry 14 }
-- the upsOutletGroupControl group
upsOutletGroupControlTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outlet groups for the UPS."
::= { upsOutletGroupControl 1 }
upsOutletGroupControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsOutletGroupControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual outlet groups. The number of
entries is contained in the upsOutletGroupControlTableSize OID."
::= { upsOutletGroupControl 2 }
upsOutletGroupControlEntry OBJECT-TYPE
SYNTAX UpsOutletGroupControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlet group to control."
INDEX { upsOutletGroupControlIndex}
::= { upsOutletGroupControlTable 1 }
UpsOutletGroupControlEntry ::=
SEQUENCE {
upsOutletGroupControlIndex INTEGER,
upsOutletGroupControlName DisplayString,
upsOutletGroupControlCommand INTEGER,
upsOutletGroupControlOutletType INTEGER
}
upsOutletGroupControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet group entry."
::= { upsOutletGroupControlEntry 1 }
upsOutletGroupControlName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet group. This OID is provided
for informational purposes only. This value is set
by the upsOutletGroupConfigName OID."
::= { upsOutletGroupControlEntry 2 }
upsOutletGroupControlCommand OBJECT-TYPE
SYNTAX INTEGER {
upsOutletGroupImmediateOn (1),
upsOutletGroupImmediateOff (2),
upsOutletGroupImmediateRebootWithOrWithoutAC (3),
upsOutletGroupDelayedOn (4),
upsOutletGroupDelayedOff (5),
upsOutletGroupDelayedRebootWithOrWithoutAC (6),
upsOutletGroupCancelPendingCommand (7),
upsOutletGroupControlUnknown (8),
upsOutletGroupImmediateRebootShutdown (9),
upsOutletGroupDelayedRebootShutdown (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet group state. If the outlet
group is on, the upsOutletGroupImmediateOn (1) value will be returned. If
the outlet group is off, the upsOutletGroupImmediateOff (2) value will be
returned.
If the state of the outlet group cannot be determined, the
upsOutletGroupControlUnknown (8) value will be returned.
Setting this variable to upsOutletGroupImmediateOn (1) will turn the
outlet group on immediately.
Setting this variable to upsOutletGroupImmediateOff (2) will turn the
outlet group off immediately.
Setting this variable to upsOutletGroupImmediateRebootWithOrWithoutAC (3)
will turn the outlet group off immediately, wait the
upsOutletGroupConfigRebootDuration OID time, wait the
upsOutletGroupConfigPowerOnDelay OID, and then turn the outlet group on
regardless of the AC input power on the UPS.
Setting this variable to upsOutletGroupDelayedOn (4) will turn the outlet
group on after the upsOutletGroupConfigPowerOnDelay OID has elapsed.
Setting this variable to upsOutletGroupDelayedOff (5) will turn the outlet
group off after the upsOutletGroupConfigPowerOffDelay OID has elapsed.
Setting this variable to upsOutletGroupDelayedRebootWithOrWithoutAC (6)
will turn the outlet group off after the upsOutletGroupConfigPowerOffDelay
OID has elapsed, wait the upsOutletGroupConfigRebootDuration OID time, wait
the upsOutletGroupConfigPowerOnDelay OID, and then turn the outlet group
on regardless of the AC input power on the UPS.
Setting this variable to upsOutletGroupCancelPendingCommand (7) will
cause any pending command to this outlet group to be canceled.
Setting this variable to upsOutletGroupImmediateRebootShutdown (9) will
turn the outlet group off immediately, wait for the AC power to return to normal
(a minimum of the upsOutletGroupConfigRebootDuration OID time), wait the
upsOutletGroupConfigPowerOnDelay OID time, and then turn the outlet
group on.
Setting this variable to upsOutletGroupDelayedRebootShutdown (10) will
turn the outlet group off after the upsOutletGroupConfigPowerOffDelay OID
has elapsed, wait for the AC power to return to normal (a minimum of the
upsOutletGroupConfigRebootDuration OID time), wait the
upsOutletGroupConfigPowerOnDelay OID time, and then turn the outlet
group on.
In systems with a main outlet group, commands to the main outlet group must
be performed with caution. It may be clearer to use the ups control commands
available from upsAdvControl... OIDs. If any command is made to the main
outlet group that will turn it off, one of two things will happen:
1) If any switched outlet group is in a state that prevents this command
from occurring on the main outlet group, the command will be rejected. Note
that a switched outlet group being on without a command in progress is not a
state that normally prevents the command.
2) The command will be accepted and applied to the main outlet group and all
switched outlet groups that are on.
There is one additional special case for systems with a main outlet group.
If the main outlet group is off and a switched outlet group is commanded to
turn on, the on command will be applied to both the main outlet group and
that switched outlet group."
::= { upsOutletGroupControlEntry 3 }
upsOutletGroupControlOutletType OBJECT-TYPE
SYNTAX INTEGER {
upsSwitchedOutletGroup (1),
upsMainOutletGroup (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is
'unswitched' and must be on in order for any of the switched
outlet groups to be on. Conversely, if the main outlet group
is off, all the switched outlet groups must also be off.
Therefore, any commands made to the main outlet group that
turn it off will also be applied to all switched outlet
groups that are on, unless the state of a switched outlet
group prevents it, in which case the command will fail."
::= { upsOutletGroupControlEntry 4 }
-- the upsDiagnosticIM group
upsDiagIMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Intelligence Modules in or attached to the UPS."
::= { upsDiagnosticIM 1 }
upsDiagIMTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagIMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual Intelligence Modules. The number of
entries is contained in the upsDiagIMTableSize OID."
::= { upsDiagnosticIM 2 }
upsDiagIMEntry OBJECT-TYPE
SYNTAX UpsDiagIMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics and information of an Intelligence Module."
INDEX { upsDiagIMIndex}
::= { upsDiagIMTable 1 }
UpsDiagIMEntry ::=
SEQUENCE {
upsDiagIMIndex INTEGER,
upsDiagIMType INTEGER,
upsDiagIMStatus INTEGER,
upsDiagIMFirmwareRev DisplayString,
upsDiagIMSlaveFirmwareRev DisplayString,
upsDiagIMHardwareRev DisplayString,
upsDiagIMSerialNum DisplayString,
upsDiagIMManufactureDate DisplayString,
upsDiagIMInControl INTEGER
}
upsDiagIMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Intelligence Module entry."
::= { upsDiagIMEntry 1 }
upsDiagIMType OBJECT-TYPE
SYNTAX INTEGER {
imUnknown (1),
imMIM (2),
imRIM (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the Intelligence Module.
imUnknown(1) indicates the IM type is unknown.
imMIM(2) indicates the IM type is a Main Intelligence Module.
imRIM(3) indicates the IM type is Redundant Intelligence Module."
::= { upsDiagIMEntry 2 }
upsDiagIMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Intelligence Module.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagIMEntry 3 }
upsDiagIMFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Intelligence Module."
::= { upsDiagIMEntry 4 }
upsDiagIMSlaveFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slave firmware revision of the Intelligence Module."
::= { upsDiagIMEntry 5 }
upsDiagIMHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Intelligence Module."
::= { upsDiagIMEntry 6 }
upsDiagIMSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Intelligence Module."
::= { upsDiagIMEntry 7 }
upsDiagIMManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The manufacture date of the Intelligence Module."
::= { upsDiagIMEntry 8 }
upsDiagIMInControl OBJECT-TYPE
SYNTAX INTEGER {
activeInControl (1),
passive (2),
unknown (3),
fault (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Intelligence Module state.
activeInControl(1) indicates the IM is active and in control.
passive(2) indicates the IM is in passive state.
unknown(3) indicates the IM is in unknown state.
fault(4) indicates the IM is in fault state."
::= { upsDiagIMEntry 9 }
-- the upsDiagnosticPowerModules group
upsDiagPMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of Power Modules supported by the UPS."
::= { upsDiagnosticPowerModules 1 }
upsDiagPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagPMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of Individual Power modules. The number of
entries is contained in the upsDiagPMTableSize OID."
::= { upsDiagnosticPowerModules 2 }
upsDiagPMEntry OBJECT-TYPE
SYNTAX UpsDiagPMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of an Power Module."
INDEX { upsDiagPMIndex}
::= { upsDiagPMTable 1 }
UpsDiagPMEntry ::=
SEQUENCE {
upsDiagPMIndex INTEGER,
upsDiagPMStatus INTEGER,
upsDiagPMFirmwareRev DisplayString,
upsDiagPMHardwareRev DisplayString,
upsDiagPMSerialNum DisplayString,
upsDiagPMManufactureDate DisplayString,
upsDiagPMModelNum DisplayString
}
upsDiagPMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Power Module entry."
::= { upsDiagPMEntry 1 }
upsDiagPMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Power Module.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagPMEntry 2 }
upsDiagPMFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Power Module."
::= { upsDiagPMEntry 3 }
upsDiagPMHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Power Module."
::= { upsDiagPMEntry 4 }
upsDiagPMSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Power Module."
::= { upsDiagPMEntry 5 }
upsDiagPMManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The manufacture date of the Power Module."
::= { upsDiagPMEntry 6 }
upsDiagPMModelNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the Power Module."
::= { upsDiagPMEntry 7 }
upsDiagPMLifetimeInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagPMLifetimeInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual power module's lifetime information.
The number of entries is contained in the upsDiagPMTableSize OID."
::= { upsDiagnosticPowerModules 3 }
upsDiagPMLifetimeInfoEntry OBJECT-TYPE
SYNTAX UpsDiagPMLifetimeInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a Power Module lifetime information."
INDEX { upsDiagPMLifetimeInfoIndex}
::= { upsDiagPMLifetimeInfoTable 1 }
UpsDiagPMLifetimeInfoEntry ::=
SEQUENCE {
upsDiagPMLifetimeInfoIndex INTEGER,
upsDiagPMLifetimeStatus INTEGER,
upsDiagPMEstmtdLifetimeRmng INTEGER,
upsDiagPMEstmtdLifetimeRmngPct INTEGER,
upsDiagPMFanLifetimeStatus INTEGER,
upsDiagPMFanEstmtdLifetimeRmng INTEGER,
upsDiagPMFanEstmtdLifetimeRmngPct INTEGER
}
upsDiagPMLifetimeInfoIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Power Module lifetime information entry."
::= { upsDiagPMLifetimeInfoEntry 1 }
upsDiagPMLifetimeStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
nearEnd (2),
exceeded (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Power Module lifetime information.
ok(1) indicates the device lifetime status is OK.
nearEnd(2) indicates the device lifetime status is near end.
exceeded(3) indicates the device lifetime status is exceeded.
unknown(4) indicates the device lifetime status is unknown."
::= { upsDiagPMLifetimeInfoEntry 2 }
upsDiagPMEstmtdLifetimeRmng OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the time remaining for the module before it should be replaced.
Measured in months. This value is set when you originally install the module."
::= { upsDiagPMLifetimeInfoEntry 3 }
upsDiagPMEstmtdLifetimeRmngPct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the percentage of the total lifetime remaining for the module
before it should be replaced."
::= { upsDiagPMLifetimeInfoEntry 4 }
upsDiagPMFanLifetimeStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
nearEnd (2),
exceeded (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Power Module Fan lifetime information.
ok(1) indicates the device lifetime status is OK.
nearEnd(2) indicates the device lifetime status is near end.
exceeded(3) indicates the device lifetime status is exceeded.
unknown(4) indicates the device lifetime status is unknown."
::= { upsDiagPMLifetimeInfoEntry 5 }
upsDiagPMFanEstmtdLifetimeRmng OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the time remaining, measured in months, before the module's
fan should be replaced. It is reset by the field service engineer when
a new fan is installed."
::= { upsDiagPMLifetimeInfoEntry 6 }
upsDiagPMFanEstmtdLifetimeRmngPct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the percentage of the total lifetime remaining
before the module's fan should be replaced."
::= { upsDiagPMLifetimeInfoEntry 7 }
upsDiagPMEnclDoorFltrTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of power module enclosures attached to the UPS."
::= { upsDiagnosticPowerModules 4 }
upsDiagPMEnclDoorFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagPMEnclDoorFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the diagnostics of individual power module enclosure door filters.
The number of entries is contained in the upsDiagPMEnclDoorFltrTableSize OID."
::= { upsDiagnosticPowerModules 5 }
upsDiagPMEnclDoorFltrEntry OBJECT-TYPE
SYNTAX UpsDiagPMEnclDoorFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Power module door filter diagnostics info."
INDEX { upsDiagPMEnclIndex}
::= { upsDiagPMEnclDoorFltrTable 1 }
UpsDiagPMEnclDoorFltrEntry ::=
SEQUENCE {
upsDiagPMEnclIndex INTEGER,
upsDiagPMEnclDoorFltrLifetime INTEGER,
upsDiagPMEnclDoorFltrStatus INTEGER,
upsDiagPMEnclDoorFltrEstmtdLifetimeRmng INTEGER,
upsDiagPMEnclDoorFltrEstmtdLifetimeRmngPct INTEGER
}
upsDiagPMEnclIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the power module enclosure entry.
Enclosure 0 indicates the Power enclosure 1.
Enclosure 1 indicates the Power enclosure 2."
::= { upsDiagPMEnclDoorFltrEntry 1 }
upsDiagPMEnclDoorFltrLifetime OBJECT-TYPE
SYNTAX INTEGER {
heavyFiltration15days (1),
normalFiltration30days(2),
lightFiltration60days (3),
notPresent (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Door filter replacement time interval, based on the installation enivironment.
heavyFiltration15days (1) indicates door filter needs to be replaced within 15 days.
normalFiltration30days (2) indicates door filter needs to be replaced within 30 days.
lightFiltration60days (3) indicates door filter needs to be replaced within 60 days.
notPresent(4) indicates that the door filter is not present."
::= { upsDiagPMEnclDoorFltrEntry 2 }
upsDiagPMEnclDoorFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
nearEnd (2),
exceeded (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current status of the door filter.
ok(1) indicates the device lifetime status is OK.
nearEnd(2) indicates the device lifetime status is near end.
exceeded(3) indicates the device lifetime status is exceeded.
unknown(4) indicates the device lifetime status is unknown."
::= { upsDiagPMEnclDoorFltrEntry 3 }
upsDiagPMEnclDoorFltrEstmtdLifetimeRmng OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the time remaining, measured in days, before the module door filter should be replaced.
This value is set when you originally install the module."
::= { upsDiagPMEnclDoorFltrEntry 4 }
upsDiagPMEnclDoorFltrEstmtdLifetimeRmngPct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the percentage of the total lifetime remaining for the module
door filter before it should be replaced."
::= { upsDiagPMEnclDoorFltrEntry 5 }
-- the upsDiagnosticBatteries group
upsDiagBatteryTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of batteries supported by the UPS."
::= { upsDiagnosticBatteries 1 }
upsDiagBatteryTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagBatteryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual batteries. The number of
entries is contained in the upsDiagBattTableSize OID."
::= { upsDiagnosticBatteries 2 }
upsDiagBatteryEntry OBJECT-TYPE
SYNTAX UpsDiagBatteryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a battery."
INDEX { upsDiagBatteryIndex}
::= { upsDiagBatteryTable 1 }
UpsDiagBatteryEntry ::=
SEQUENCE {
upsDiagBatteryFrameIndex INTEGER,
upsDiagBatteryIndex INTEGER,
upsDiagBatteryStatus INTEGER,
upsDiagBatterySerialNumber DisplayString,
upsDiagBatteryFirmwareRev DisplayString,
upsDiagBatteryManufactureDate DisplayString,
upsDiagBatteryType DisplayString,
upsDiagBatteryFramePresent INTEGER,
upsDiagBatteryFrameTemperature INTEGER
}
upsDiagBatteryFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the battery frame entry.
Frame 0 indicates the Main frame. Extended Run (XR) frames
start from index 1."
::= { upsDiagBatteryEntry 1 }
upsDiagBatteryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the battery entry."
::= { upsDiagBatteryEntry 2 }
upsDiagBatteryStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
failed (4),
highTemperature (5),
replaceImmediately (6),
lowCapacity (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the battery.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the battery status is OK.
failed(4) indicates the battery status is failed.
highTemperature(5) indicates the battery has a high temperature condition.
replaceImmediately(6) indicates the battery must be replaced immediately.
lowCapacity(7) indicates the battery has a low capacity."
::= { upsDiagBatteryEntry 3 }
upsDiagBatterySerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the battery."
::= { upsDiagBatteryEntry 4 }
upsDiagBatteryFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the battery."
::= { upsDiagBatteryEntry 5 }
upsDiagBatteryManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The manufacture date of the battery."
::= { upsDiagBatteryEntry 6 }
upsDiagBatteryType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery type or rating for the battery."
::= { upsDiagBatteryEntry 7 }
upsDiagBatteryFramePresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent(0),
present(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery frame/cabinet status.
0 indicates frame/cabinet is not present.
1 indicates frame/cabinet is present."
::= { upsDiagBatteryEntry 8 }
upsDiagBatteryFrameTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery frame/cabinet temperature in tenths of degrees celsius.
If the frame/cabinet is not present, this variable is set to (-1)."
::= { upsDiagBatteryEntry 9 }
upsDiagBatteryFrameTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of battery frames supported by the UPS."
::= { upsDiagnosticBatteries 3 }
upsDiagBatteryFrameTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagBatteryFrameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual battery frame. The number of
entries is contained in the upsDiagBatteryFrameTableSize OID."
::= { upsDiagnosticBatteries 4 }
upsDiagBatteryFrameEntry OBJECT-TYPE
SYNTAX UpsDiagBatteryFrameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a battery frame."
INDEX { upsDiagBatteryFrameTableIndex}
::= { upsDiagBatteryFrameTable 1 }
UpsDiagBatteryFrameEntry ::=
SEQUENCE {
upsDiagBatteryFrameTableIndex INTEGER,
upsDiagBatteryModuleStatusPerFrame DisplayString,
upsDiagBatteryPositiveVoltage INTEGER,
upsDiagBatteryNegativeVoltage INTEGER,
upsDiagBatteryTemperature INTEGER
}
upsDiagBatteryFrameTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the battery frame entry."
::= { upsDiagBatteryFrameEntry 1 }
upsDiagBatteryModuleStatusPerFrame OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 64 flags representing
the status of battery modules. 1 indicates battery module installed,
0 indicates battery module not installed.
The flags are numbered from 1 to 64, and read from left
to right. The flags are defined as follows:
Flag 1: Battery Module Level 1 A
Flag 2: Battery Module Level 1 B
Flag 3: Battery Module Level 1 C
Flag 4: Battery Module Level 1 D
Flag 5: Battery Module Level 1 E
Flag 6: Battery Module Level 1 F
Flag 7: Battery Module Level 2 A
Flag 8: Battery Module Level 2 B
Flag 9: Battery Module Level 2 C
Flag 10: Battery Module Level 2 D
Flag 11: Battery Module Level 2 E
Flag 12: Battery Module Level 2 F
Flag 13: Battery Module Level 3 A
Flag 14: Battery Module Level 3 B
Flag 15: Battery Module Level 3 C
Flag 16: Battery Module Level 3 D
Flag 17: Battery Module Level 3 E
Flag 18: Battery Module Level 3 F
Flag 19: Battery Module Level 4 A
Flag 20: Battery Module Level 4 B
Flag 21: Battery Module Level 4 C
Flag 22: Battery Module Level 4 D
Flag 23: Battery Module Level 4 E
Flag 24: Battery Module Level 4 F
Flag 25: Battery Module Level 7 A
Flag 26: Battery Module Level 7 B
Flag 27: Battery Module Level 7 C
Flag 28: Battery Module Level 7 D
Flag 29: Battery Module Level 7 E
Flag 30: Battery Module Level 7 F
Flag 31: Battery Module Level 8 A
Flag 32: Battery Module Level 8 B
Flag 33: Battery Module Level 8 C
Flag 34: Battery Module Level 8 D
Flag 35: Battery Module Level 8 E
Flag 36: Battery Module Level 8 F
Flag 37: Battery Module Level 9 A
Flag 38: Battery Module Level 9 B
Flag 39: Battery Module Level 9 C
Flag 40: Battery Module Level 9 D
Flag 41: Battery Module Level 9 E
Flag 42: Battery Module Level 9 F
Flag 43: Battery Module Level 10 A
Flag 44: Battery Module Level 10 B
Flag 45: Battery Module Level 10 C
Flag 46: Battery Module Level 10 D
Flag 47: Battery Module Level 10 E
Flag 48: Battery Module Level 10 F
Flag 49: <Not Used>
Flag 50: <Not Used>
Flag 51: <Not Used>
Flag 52: <Not Used>
Flag 53: <Not Used>
Flag 54: <Not Used>
Flag 55: <Not Used>
Flag 56: <Not Used>
Flag 57: <Not Used>
Flag 58: <Not Used>
Flag 59: <Not Used>
Flag 60: <Not Used>
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>"
::= { upsDiagBatteryFrameEntry 2 }
upsDiagBatteryPositiveVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery positive voltage, in Volts."
::= { upsDiagBatteryFrameEntry 3 }
upsDiagBatteryNegativeVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery negative voltage, in Volts."
::= { upsDiagBatteryFrameEntry 4 }
upsDiagBatteryTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The battery frame/cabinet temperature in tenths of degrees celsius.
If the frame/cabinet is not present, this variable is set to (-1)."
::= { upsDiagBatteryFrameEntry 5 }
-- the upsDiagnosticSubsystem group
upsDiagSubSysFrameTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames attached to the UPS including the Main frame."
::= { upsDiagnosticSubsystem 1 }
upsDiagSubSysFrameTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysFrameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual XR Frames."
::= { upsDiagnosticSubsystem 2 }
upsDiagSubSysFrameEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysFrameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of an XR Frame."
INDEX { upsDiagSubSysFrameIndex}
::= { upsDiagSubSysFrameTable 1 }
UpsDiagSubSysFrameEntry ::=
SEQUENCE {
upsDiagSubSysFrameIndex INTEGER,
upsDiagSubSysFrameType INTEGER,
upsDiagSubSysFrameFirmwareRev DisplayString,
upsDiagSubSysFrameHardwareRev DisplayString,
upsDiagSubSysFrameSerialNum DisplayString,
upsDiagSubSysFrameManufactureDate DisplayString
}
upsDiagSubSysFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysFrameEntry 1 }
upsDiagSubSysFrameType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
frameTypeMain (3),
frameTypeXR (4),
frameTypeLXR (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Frame.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
frameTypeMain(3) indicates the frame type is the Main Frame.
frameTypeXR(4) indicates the frame type is an XR Frame.
frameTypeLXR(5) indicates the frame type is an LXR Frame."
::= { upsDiagSubSysFrameEntry 2 }
upsDiagSubSysFrameFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the frame."
::= { upsDiagSubSysFrameEntry 3 }
upsDiagSubSysFrameHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the frame."
::= { upsDiagSubSysFrameEntry 4 }
upsDiagSubSysFrameSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the frame."
::= { upsDiagSubSysFrameEntry 5 }
upsDiagSubSysFrameManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The manufacture date of the frame."
::= { upsDiagSubSysFrameEntry 6 }
upsDiagSubSysIntBypSwitchTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Internal Bypass switches attached to the UPS."
::= { upsDiagnosticSubsystem 3 }
upsDiagSubSysIntBypSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysIntBypSwitchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the Internal Bypass Switch."
::= { upsDiagnosticSubsystem 4 }
upsDiagSubSysIntBypSwitchEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysIntBypSwitchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of the Internal Bypass Switch."
INDEX { upsDiagSubSysIntBypSwitchIndex}
::= { upsDiagSubSysIntBypSwitchTable 1 }
UpsDiagSubSysIntBypSwitchEntry ::=
SEQUENCE {
upsDiagSubSysIntBypSwitchFrameIndex INTEGER,
upsDiagSubSysIntBypSwitchIndex INTEGER,
upsDiagSubSysIntBypSwitchStatus INTEGER,
upsDiagSubSysIntBypSwitchFirmwareRev DisplayString,
upsDiagSubSysIntBypSwitchHardwareRev DisplayString,
upsDiagSubSysIntBypSwitchSerialNum DisplayString,
upsDiagSubSysIntBypSwitchManufactureDate DisplayString,
upsDiagSubSysIntBypSwitchModelNum DisplayString
}
upsDiagSubSysIntBypSwitchFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysIntBypSwitchEntry 1 }
upsDiagSubSysIntBypSwitchIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Internal Bypass Switch index entry."
::= { upsDiagSubSysIntBypSwitchEntry 2 }
upsDiagSubSysIntBypSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Internal Bypass Switch status.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysIntBypSwitchEntry 3 }
upsDiagSubSysIntBypSwitchFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Internal Bypass Switch."
::= { upsDiagSubSysIntBypSwitchEntry 4 }
upsDiagSubSysIntBypSwitchHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Internal Bypass Switch."
::= { upsDiagSubSysIntBypSwitchEntry 5 }
upsDiagSubSysIntBypSwitchSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Internal Bypass Switch."
::= { upsDiagSubSysIntBypSwitchEntry 6 }
upsDiagSubSysIntBypSwitchManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The manufacture date of the Internal Bypass Switch."
::= { upsDiagSubSysIntBypSwitchEntry 7 }
upsDiagSubSysIntBypSwitchModelNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the Internal Bypass Switch."
::= { upsDiagSubSysIntBypSwitchEntry 8 }
upsDiagSubSysBattMonitorTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Battery Monitor Boards attached to the UPS."
::= { upsDiagnosticSubsystem 5 }
upsDiagSubSysBattMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysBattMonitorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the Battery Monitor Board."
::= { upsDiagnosticSubsystem 6 }
upsDiagSubSysBattMonitorEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysBattMonitorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of the Battery Monitor Board."
INDEX { upsDiagSubSysBattMonitorIndex}
::= { upsDiagSubSysBattMonitorTable 1 }
UpsDiagSubSysBattMonitorEntry ::=
SEQUENCE {
upsDiagSubSysBattMonitorFrameIndex INTEGER,
upsDiagSubSysBattMonitorIndex INTEGER,
upsDiagSubSysBattMonitorStatus INTEGER,
upsDiagSubSysBattMonitorFirmwareRev DisplayString,
upsDiagSubSysBattMonitorHardwareRev DisplayString,
upsDiagSubSysBattMonitorSerialNum DisplayString,
upsDiagSubSysBattMonitorManufactureDate DisplayString
}
upsDiagSubSysBattMonitorFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysBattMonitorEntry 1 }
upsDiagSubSysBattMonitorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the Battery Monitor Board."
::= { upsDiagSubSysBattMonitorEntry 2 }
upsDiagSubSysBattMonitorStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Battery Monitor Board.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysBattMonitorEntry 3 }
upsDiagSubSysBattMonitorFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Battery Monitor Board."
::= { upsDiagSubSysBattMonitorEntry 4 }
upsDiagSubSysBattMonitorHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Battery Monitor Board."
::= { upsDiagSubSysBattMonitorEntry 5 }
upsDiagSubSysBattMonitorSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Battery Monitor Board."
::= { upsDiagSubSysBattMonitorEntry 6 }
upsDiagSubSysBattMonitorManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the manufacture for the Battery Monitor Board."
::= { upsDiagSubSysBattMonitorEntry 7 }
upsDiagSubSysExternalSwitchGearTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of External Switch Gears attached to the UPS."
::= { upsDiagnosticSubsystem 7 }
upsDiagSubSysExternalSwitchGearTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysExternalSwitchGearEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the individual External Switch Gear."
::= { upsDiagnosticSubsystem 8 }
upsDiagSubSysExternalSwitchGearEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysExternalSwitchGearEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of an individual External Switch Gear."
INDEX { upsDiagSubSysExternalSwitchGearIndex}
::= { upsDiagSubSysExternalSwitchGearTable 1 }
UpsDiagSubSysExternalSwitchGearEntry ::=
SEQUENCE {
upsDiagSubSysExternalSwitchGearFrameIndex INTEGER,
upsDiagSubSysExternalSwitchGearIndex INTEGER,
upsDiagSubSysExternalSwitchGearStatus INTEGER,
upsDiagSubSysExternalSwitchGearFirmwareRev DisplayString,
upsDiagSubSysExternalSwitchGearHardwareRev DisplayString,
upsDiagSubSysExternalSwitchGearSerialNum DisplayString,
upsDiagSubSysExternalSwitchGearManufactureDate DisplayString,
upsDiagSubSysExternalSwitchGearTemperature INTEGER
}
upsDiagSubSysExternalSwitchGearFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysExternalSwitchGearEntry 1 }
upsDiagSubSysExternalSwitchGearIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the External Switch Gear."
::= { upsDiagSubSysExternalSwitchGearEntry 2 }
upsDiagSubSysExternalSwitchGearStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the External Switch Gear.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysExternalSwitchGearEntry 3 }
upsDiagSubSysExternalSwitchGearFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the External Switch Gear monitor card."
::= { upsDiagSubSysExternalSwitchGearEntry 4 }
upsDiagSubSysExternalSwitchGearHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the External Switch Gear monitor card."
::= { upsDiagSubSysExternalSwitchGearEntry 5 }
upsDiagSubSysExternalSwitchGearSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the External Switch Gear monitor card."
::= { upsDiagSubSysExternalSwitchGearEntry 6 }
upsDiagSubSysExternalSwitchGearManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the manufacture for the External Switch Gear monitor card."
::= { upsDiagSubSysExternalSwitchGearEntry 7 }
upsDiagSubSysExternalSwitchGearTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the air around the External Switch
Gear monitor card in tenths of degrees Celsius."
::= { upsDiagSubSysExternalSwitchGearEntry 8 }
upsDiagSubSysDisplayInterfaceCardTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Display Interface Cards attached to the UPS."
::= { upsDiagnosticSubsystem 9 }
upsDiagSubSysDisplayInterfaceCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysDisplayInterfaceCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual Display Interface Cards."
::= { upsDiagnosticSubsystem 10 }
upsDiagSubSysDisplayInterfaceCardEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysDisplayInterfaceCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a Display Interface Card."
INDEX { upsDiagSubSysDisplayInterfaceCardIndex}
::= { upsDiagSubSysDisplayInterfaceCardTable 1 }
UpsDiagSubSysDisplayInterfaceCardEntry ::=
SEQUENCE {
upsDiagSubSysDisplayInterfaceCardFrameIndex INTEGER,
upsDiagSubSysDisplayInterfaceCardIndex INTEGER,
upsDiagSubSysDisplayInterfaceCardStatus INTEGER
}
upsDiagSubSysDisplayInterfaceCardFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysDisplayInterfaceCardEntry 1 }
upsDiagSubSysDisplayInterfaceCardIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the Display Interface Card."
::= { upsDiagSubSysDisplayInterfaceCardEntry 2 }
upsDiagSubSysDisplayInterfaceCardStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Display Interface Card.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysDisplayInterfaceCardEntry 3 }
upsDiagSubSysDCCircuitBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC Circuit Breakers attached to the UPS."
::= { upsDiagnosticSubsystem 11 }
upsDiagSubSysDCCircuitBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysDCCircuitBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual DC Circuit Breakers."
::= { upsDiagnosticSubsystem 12 }
upsDiagSubSysDCCircuitBreakerEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysDCCircuitBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a DC Circuit Breaker."
INDEX { upsDiagSubSysDCCircuitBreakerIndex}
::= { upsDiagSubSysDCCircuitBreakerTable 1 }
UpsDiagSubSysDCCircuitBreakerEntry ::=
SEQUENCE {
upsDiagSubSysDCCircuitBreakerFrameIndex INTEGER,
upsDiagSubSysDCCircuitBreakerIndex INTEGER,
upsDiagSubSysDCCircuitBreakerStatus INTEGER
}
upsDiagSubSysDCCircuitBreakerFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysDCCircuitBreakerEntry 1 }
upsDiagSubSysDCCircuitBreakerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the DC Circuit Breaker."
::= { upsDiagSubSysDCCircuitBreakerEntry 2 }
upsDiagSubSysDCCircuitBreakerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the DC Circuit Breaker.
unknown(1) indicates the circuit breaker status is unknown.
notInstalled(2) indicates the circuit breaker is not installed.
opened(3) indicates the circuit breaker is opened.
closed(4) indicates the circuit breaker is closed."
::= { upsDiagSubSysDCCircuitBreakerEntry 3 }
upsDiagSubSysSystemPowerSupplyTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of System Power Supplies attached to the UPS."
::= { upsDiagnosticSubsystem 13 }
upsDiagSubSysSystemPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysSystemPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual System Power Supplies."
::= { upsDiagnosticSubsystem 14 }
upsDiagSubSysSystemPowerSupplyEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysSystemPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a System Power Supply."
INDEX { upsDiagSubSysSystemPowerSupplyIndex}
::= { upsDiagSubSysSystemPowerSupplyTable 1 }
UpsDiagSubSysSystemPowerSupplyEntry ::=
SEQUENCE {
upsDiagSubSysSystemPowerSupplyFrameIndex INTEGER,
upsDiagSubSysSystemPowerSupplyIndex INTEGER,
upsDiagSubSysSystemPowerSupplyStatus INTEGER,
upsDiagSubSysSystemPowerSupplyFirmwareRev DisplayString,
upsDiagSubSysSystemPowerSupplyHardwareRev DisplayString,
upsDiagSubSysSystemPowerSupplySerialNum DisplayString,
upsDiagSubSysSystemPowerSupplyManufactureDate DisplayString
}
upsDiagSubSysSystemPowerSupplyFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysSystemPowerSupplyEntry 1 }
upsDiagSubSysSystemPowerSupplyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of a System Power Supply."
::= { upsDiagSubSysSystemPowerSupplyEntry 2 }
upsDiagSubSysSystemPowerSupplyStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the System Power Supply.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysSystemPowerSupplyEntry 3 }
upsDiagSubSysSystemPowerSupplyFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the System Power Supply monitor card."
::= { upsDiagSubSysSystemPowerSupplyEntry 4 }
upsDiagSubSysSystemPowerSupplyHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the System Power Supply monitor card."
::= { upsDiagSubSysSystemPowerSupplyEntry 5 }
upsDiagSubSysSystemPowerSupplySerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the System Power Supply monitor card."
::= { upsDiagSubSysSystemPowerSupplyEntry 6 }
upsDiagSubSysSystemPowerSupplyManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the manufacture for the System Power Supply monitor card."
::= { upsDiagSubSysSystemPowerSupplyEntry 7 }
upsDiagSubSysXRCommunicationCardTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of XR Communication Cards attached to the UPS."
::= { upsDiagnosticSubsystem 15 }
upsDiagSubSysXRCommunicationCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysXRCommunicationCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual XR Communication Cards."
::= { upsDiagnosticSubsystem 16 }
upsDiagSubSysXRCommunicationCardEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysXRCommunicationCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of an XR Communication Card."
INDEX { upsDiagSubSysXRCommunicationCardIndex}
::= { upsDiagSubSysXRCommunicationCardTable 1 }
UpsDiagSubSysXRCommunicationCardEntry ::=
SEQUENCE {
upsDiagSubSysXRCommunicationCardFrameIndex INTEGER,
upsDiagSubSysXRCommunicationCardIndex INTEGER,
upsDiagSubSysXRCommunicationCardStatus INTEGER,
upsDiagSubSysXRCommunicationCardFirmwareRev DisplayString,
upsDiagSubSysXRCommunicationCardSerialNum DisplayString
}
upsDiagSubSysXRCommunicationCardFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysXRCommunicationCardEntry 1 }
upsDiagSubSysXRCommunicationCardIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an XR Communication Card."
::= { upsDiagSubSysXRCommunicationCardEntry 2 }
upsDiagSubSysXRCommunicationCardStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the XR Communication Card.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysXRCommunicationCardEntry 3 }
upsDiagSubSysXRCommunicationCardFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the XR Communication card."
::= { upsDiagSubSysXRCommunicationCardEntry 4 }
upsDiagSubSysXRCommunicationCardSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the XR Communication card."
::= { upsDiagSubSysXRCommunicationCardEntry 5 }
upsDiagSubSysExternalPowerFrameBoardTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of External Power Frame Boards attached to the UPS."
::= { upsDiagnosticSubsystem 17 }
upsDiagSubSysExternalPowerFrameBoardTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysExternalPowerFrameBoardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual External Power Frame Boards."
::= { upsDiagnosticSubsystem 18 }
upsDiagSubSysExternalPowerFrameBoardEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysExternalPowerFrameBoardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of an External Power Frame Board."
INDEX { upsDiagSubSysExternalPowerFrameBoardIndex}
::= { upsDiagSubSysExternalPowerFrameBoardTable 1 }
UpsDiagSubSysExternalPowerFrameBoardEntry ::=
SEQUENCE {
upsDiagSubSysExternalPowerFrameBoardFrameIndex INTEGER,
upsDiagSubSysExternalPowerFrameBoardIndex INTEGER,
upsDiagSubSysExternalPowerFrameBoardStatus INTEGER
}
upsDiagSubSysExternalPowerFrameBoardFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysExternalPowerFrameBoardEntry 1 }
upsDiagSubSysExternalPowerFrameBoardIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an External Power Frame Board."
::= { upsDiagSubSysExternalPowerFrameBoardEntry 2 }
upsDiagSubSysExternalPowerFrameBoardStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the External Power Frame Board.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysExternalPowerFrameBoardEntry 3 }
upsDiagSubSysChargerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Chargers attached to the UPS."
::= { upsDiagnosticSubsystem 19 }
upsDiagSubSysChargerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysChargerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual chargers."
::= { upsDiagnosticSubsystem 20 }
upsDiagSubSysChargerEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysChargerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a charger."
INDEX { upsDiagSubSysChargerIndex}
::= { upsDiagSubSysChargerTable 1 }
UpsDiagSubSysChargerEntry ::=
SEQUENCE {
upsDiagSubSysChargerFrameIndex INTEGER,
upsDiagSubSysChargerIndex INTEGER,
upsDiagSubSysChargerStatus INTEGER
}
upsDiagSubSysChargerFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysChargerEntry 1 }
upsDiagSubSysChargerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of a charger."
::= { upsDiagSubSysChargerEntry 2 }
upsDiagSubSysChargerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Charger.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysChargerEntry 3 }
upsDiagSubSysInverterTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Inverters attached to the UPS."
::= { upsDiagnosticSubsystem 21 }
upsDiagSubSysInverterTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysInverterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual Inverters."
::= { upsDiagnosticSubsystem 22 }
upsDiagSubSysInverterEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysInverterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of an Inverter."
INDEX { upsDiagSubSysInverterIndex}
::= { upsDiagSubSysInverterTable 1 }
UpsDiagSubSysInverterEntry ::=
SEQUENCE {
upsDiagSubSysInverterFrameIndex INTEGER,
upsDiagSubSysInverterIndex INTEGER,
upsDiagSubSysInverterStatus INTEGER,
upsDiagSubSysInverterFirmwareRev DisplayString,
upsDiagSubSysInverterHardwareRev DisplayString,
upsDiagSubSysInverterSerialNum DisplayString,
upsDiagSubSysInverterManufactureDate DisplayString
}
upsDiagSubSysInverterFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysInverterEntry 1 }
upsDiagSubSysInverterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an Inverter."
::= { upsDiagSubSysInverterEntry 2 }
upsDiagSubSysInverterStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Inverter.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysInverterEntry 3 }
upsDiagSubSysInverterFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Inverter monitor."
::= { upsDiagSubSysInverterEntry 4 }
upsDiagSubSysInverterHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Inverter monitor."
::= { upsDiagSubSysInverterEntry 5 }
upsDiagSubSysInverterSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Inverter monitor."
::= { upsDiagSubSysInverterEntry 6 }
upsDiagSubSysInverterManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of manufacture for the Inverter monitor."
::= { upsDiagSubSysInverterEntry 7 }
upsDiagSubSysPowerFactorCorrectionTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Power Factor Correction devices attached to the UPS."
::= { upsDiagnosticSubsystem 23 }
upsDiagSubSysPowerFactorCorrectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysPowerFactorCorrectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual PowerFactorCorrections."
::= { upsDiagnosticSubsystem 24 }
upsDiagSubSysPowerFactorCorrectionEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysPowerFactorCorrectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a Power Factor Correction."
INDEX { upsDiagSubSysPowerFactorCorrectionIndex}
::= { upsDiagSubSysPowerFactorCorrectionTable 1 }
UpsDiagSubSysPowerFactorCorrectionEntry ::=
SEQUENCE {
upsDiagSubSysPowerFactorCorrectionFrameIndex INTEGER,
upsDiagSubSysPowerFactorCorrectionIndex INTEGER,
upsDiagSubSysPowerFactorCorrectionStatus INTEGER,
upsDiagSubSysPowerFactorCorrectionFirmwareRev DisplayString,
upsDiagSubSysPowerFactorCorrectionHardwareRev DisplayString,
upsDiagSubSysPowerFactorCorrectionSerialNum DisplayString,
upsDiagSubSysPowerFactorCorrectionManufactureDate DisplayString
}
upsDiagSubSysPowerFactorCorrectionFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frame index entry."
::= { upsDiagSubSysPowerFactorCorrectionEntry 1 }
upsDiagSubSysPowerFactorCorrectionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of a Power Factor Correction."
::= { upsDiagSubSysPowerFactorCorrectionEntry 2 }
upsDiagSubSysPowerFactorCorrectionStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Power Factor Correction.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysPowerFactorCorrectionEntry 3 }
upsDiagSubSysPowerFactorCorrectionFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Power Factor Correction monitor."
::= { upsDiagSubSysPowerFactorCorrectionEntry 4 }
upsDiagSubSysPowerFactorCorrectionHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Power Factor Correction monitor."
::= { upsDiagSubSysPowerFactorCorrectionEntry 5 }
upsDiagSubSysPowerFactorCorrectionSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Power Factor Correction monitor."
::= { upsDiagSubSysPowerFactorCorrectionEntry 6 }
upsDiagSubSysPowerFactorCorrectionManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the manufacture for the Power Factor Correction monitor."
::= { upsDiagSubSysPowerFactorCorrectionEntry 7 }
upsDiagSubSysNetworkComCardTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Network Communication Cards attached to the UPS."
::= { upsDiagnosticSubsystem 25 }
upsDiagSubSysNetworkComCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysNetworkComCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting diagnostics information of an individual Network Communication Card."
::= { upsDiagnosticSubsystem 26 }
upsDiagSubSysNetworkComCardEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysNetworkComCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a Network Communication Card."
INDEX { upsDiagSubSysNetworkComCardIndex}
::= { upsDiagSubSysNetworkComCardTable 1 }
UpsDiagSubSysNetworkComCardEntry ::=
SEQUENCE {
upsDiagSubSysNetworkComCardIndex INTEGER,
upsDiagSubSysNetworkComCardModelNumber DisplayString,
upsDiagSubSysNetworkComCardSerialNumber DisplayString,
upsDiagSubSysNetworkComCardDateOfManufacture DisplayString,
upsDiagSubSysNetworkComCardHardwareRev DisplayString,
upsDiagSubSysNetworkComCardFirmwareAppRev DisplayString,
upsDiagSubSysNetworkComCardFirmwareAppOSRev DisplayString
}
upsDiagSubSysNetworkComCardIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS network and display interface communication card index entry."
::= { upsDiagSubSysNetworkComCardEntry 1 }
upsDiagSubSysNetworkComCardModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of the UPS network and display interface communication card.
This value is set at the factory."
::= { upsDiagSubSysNetworkComCardEntry 2 }
upsDiagSubSysNetworkComCardSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the UPS network and display interface communication card.
This value is set at the factory."
::= { upsDiagSubSysNetworkComCardEntry 3 }
upsDiagSubSysNetworkComCardDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the UPS network and display interface communication card was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { upsDiagSubSysNetworkComCardEntry 4 }
upsDiagSubSysNetworkComCardHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the UPS network and display interface communication card.
This value is set at the factory."
::= { upsDiagSubSysNetworkComCardEntry 5 }
upsDiagSubSysNetworkComCardFirmwareAppRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application firmware revision of the
UPS network and display interface communication card."
::= { upsDiagSubSysNetworkComCardEntry 6 }
upsDiagSubSysNetworkComCardFirmwareAppOSRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application operating system firmware revision of the
UPS network and display interface communication card."
::= { upsDiagSubSysNetworkComCardEntry 7 }
upsDiagSubSysUsrSuppBattMonitorTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of user supplied Battery Monitor Boards attached to the UPS."
::= { upsDiagnosticSubsystem 27 }
upsDiagSubSysUsrSuppBattMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysUsrSuppBattMonitorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the user supplied Battery Monitor Board."
::= { upsDiagnosticSubsystem 28 }
upsDiagSubSysUsrSuppBattMonitorEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysUsrSuppBattMonitorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of the user supplied Battery Monitor Board."
INDEX { upsDiagSubSysUsrSuppBattMonitorIndex}
::= { upsDiagSubSysUsrSuppBattMonitorTable 1 }
UpsDiagSubSysUsrSuppBattMonitorEntry ::=
SEQUENCE {
upsDiagSubSysUsrSuppBattMonitorIndex INTEGER,
upsDiagSubSysUsrSuppBattMonitorStatus INTEGER,
upsDiagSubSysUsrSuppBattMonitorFirmwareRev DisplayString,
upsDiagSubSysUsrSuppBattMonitorHardwareRev DisplayString,
upsDiagSubSysUsrSuppBattMonitorSerialNum DisplayString,
upsDiagSubSysUsrSuppBattMonitorTemperature INTEGER
}
upsDiagSubSysUsrSuppBattMonitorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the user supplied Battery Monitor Board."
::= { upsDiagSubSysUsrSuppBattMonitorEntry 1 }
upsDiagSubSysUsrSuppBattMonitorStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the user supplied Battery Monitor Board.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysUsrSuppBattMonitorEntry 2 }
upsDiagSubSysUsrSuppBattMonitorFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the user supplied Battery Monitor Board."
::= { upsDiagSubSysUsrSuppBattMonitorEntry 3 }
upsDiagSubSysUsrSuppBattMonitorHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the user supplied
Battery Monitor Board."
::= { upsDiagSubSysUsrSuppBattMonitorEntry 4 }
upsDiagSubSysUsrSuppBattMonitorSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the user supplied
Battery Monitor Board."
::= { upsDiagSubSysUsrSuppBattMonitorEntry 5 }
upsDiagSubSysUsrSuppBattMonitorTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the air around the user supplied
Battery Monitor Board in tenths of degrees Celsius."
::= { upsDiagSubSysUsrSuppBattMonitorEntry 6 }
upsDiagSubSysUsrSuppBattBreakerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the user supplied Battery Breaker.
unknown(1) indicates the circuit breaker status is unknown.
notInstalled(2) indicates the circuit breaker is not installed.
opened(3) indicates the circuit breaker is opened.
closed(4) indicates the circuit breaker is closed."
::= { upsDiagnosticSubsystem 29 }
upsDiagSubSysPSUTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Power Supply Units in the UPS."
::= { upsDiagnosticSubsystem 30 }
upsDiagSubSysPSUTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysPSUEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual Power Supply Units. The number of
entries is contained in the upsDiagSubSysPSUTableSize OID."
::= { upsDiagnosticSubsystem 31 }
upsDiagSubSysPSUEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysPSUEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics information of a Power Supply Unit."
INDEX { upsDiagSubSysPSUIndex}
::= { upsDiagSubSysPSUTable 1 }
UpsDiagSubSysPSUEntry ::=
SEQUENCE {
upsDiagSubSysPSUIndex INTEGER,
upsDiagSubSysPSUStatus INTEGER
}
upsDiagSubSysPSUIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Power Supply Unit entry."
::= { upsDiagSubSysPSUEntry 1 }
upsDiagSubSysPSUStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Power Supply Unit.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysPSUEntry 2 }
upsDiagSubSysIDRCTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ID and Relay Controller Cards attached to the UPS."
::= { upsDiagnosticSubsystem 32 }
upsDiagSubSysIDRCTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysIDRCEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the ID and Relay Controller Card."
::= { upsDiagnosticSubsystem 33 }
upsDiagSubSysIDRCEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysIDRCEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of the ID and Relay Controller Card."
INDEX { upsDiagSubSysIDRCIndex}
::= { upsDiagSubSysIDRCTable 1 }
UpsDiagSubSysIDRCEntry ::=
SEQUENCE {
upsDiagSubSysIDRCIndex INTEGER,
upsDiagSubSysIDRCStatus INTEGER,
upsDiagSubSysIDRCFirmwareRev DisplayString,
upsDiagSubSysIDRCHardwareRev DisplayString,
upsDiagSubSysIDRCSerialNum DisplayString
}
upsDiagSubSysIDRCIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the ID and Relay Controller Card."
::= { upsDiagSubSysIDRCEntry 1 }
upsDiagSubSysIDRCStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the ID and Relay Controller Card.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagSubSysIDRCEntry 2 }
upsDiagSubSysIDRCFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the ID and Relay Controller Card."
::= { upsDiagSubSysIDRCEntry 3 }
upsDiagSubSysIDRCHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the ID and Relay Controller Card."
::= { upsDiagSubSysIDRCEntry 4 }
upsDiagSubSysIDRCSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the ID
and Relay Controller Card."
::= { upsDiagSubSysIDRCEntry 5 }
upsDiagSubSysExternalConnectorStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the external connector board.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagnosticSubsystem 34 }
upsDiagSubSysBackfeedContactorTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of backfeed protection contactor attached to the UPS."
::= { upsDiagnosticSubsystem 35 }
upsDiagSubSysBackfeedContactorTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysBackfeedContactorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Backfeed protection contactor table."
::= { upsDiagnosticSubsystem 36 }
upsDiagSubSysBackfeedContactorEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysBackfeedContactorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of backfeed protection contactors."
INDEX { upsDiagSubSysbackfeedContactorIndex }
::= { upsDiagSubSysBackfeedContactorTable 1 }
UpsDiagSubSysBackfeedContactorEntry ::=
SEQUENCE {
upsDiagSubSysbackfeedContactorIndex
INTEGER,
upsDiagSubSysbackfeedContactorName
DisplayString,
upsDiagSubSysbackfeedContactorType
INTEGER,
upsDiagSubSysbackfeedContactorStatus
INTEGER
}
upsDiagSubSysbackfeedContactorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the backfeed protection contactor."
::= { upsDiagSubSysBackfeedContactorEntry 1 }
upsDiagSubSysbackfeedContactorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the backfeed protection contactor."
::= { upsDiagSubSysBackfeedContactorEntry 2 }
upsDiagSubSysbackfeedContactorType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
normalAC(2),
bypassAC(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the backfeed protection contactor types available in the UPS system.
If the UPS is unable to find any attached contactors, this variable
is set to unknown(1)."
::= { upsDiagSubSysBackfeedContactorEntry 3 }
upsDiagSubSysbackfeedContactorStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
opened(2),
closed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of backfeed protection contactor.
unknown(1) indicates the contactor status is unknown.
opened (2) indicates the contactor is opened.
closed (3) indicates the contactor is closed."
::= { upsDiagSubSysBackfeedContactorEntry 4 }
upsDiagSubSysIntBypSwitchFanLifetimeInfoTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of backfeed protection contactor attached to the UPS."
::= { upsDiagnosticSubsystem 37 }
upsDiagSubSysIntBypSwitchFanLifetimeInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubSysIntBypSwitchFanLifetimeInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the Internal Bypass Switch life time infomation."
::= { upsDiagnosticSubsystem 38 }
upsDiagSubSysIntBypSwitchFanLifetimeInfoEntry OBJECT-TYPE
SYNTAX UpsDiagSubSysIntBypSwitchFanLifetimeInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of the Internal Bypass Switch."
INDEX { upsDiagSubSysIntBypSwitchFanLifetimeInfoIndex }
::= { upsDiagSubSysIntBypSwitchFanLifetimeInfoTable 1 }
UpsDiagSubSysIntBypSwitchFanLifetimeInfoEntry ::=
SEQUENCE {
upsDiagSubSysIntBypSwitchFanLifetimeInfoIndex INTEGER,
upsDiagSubSysIntBypSwitchFanLifetimeStatus INTEGER,
upsDiagSubSysIntBypSwitchFanEstmtdLifetimeRmng INTEGER,
upsDiagSubSysIntBypSwitchFanEstmtdLifetimeRmngPct INTEGER
}
upsDiagSubSysIntBypSwitchFanLifetimeInfoIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Internal Bypass Switch Fan liftime information entry"
::= { upsDiagSubSysIntBypSwitchFanLifetimeInfoEntry 1 }
upsDiagSubSysIntBypSwitchFanLifetimeStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
nearEnd (2),
exceeded (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Internal Bypass Switch Fan lifetime information.
ok(1) indicates the device lifetime status is OK.
nearEnd(2) indicates the device lifetime status is near end.
exceeded(3) indicates the device lifetime status is exceeded.
unknown(4) indicates the device lifetime status is unknown."
::= { upsDiagSubSysIntBypSwitchFanLifetimeInfoEntry 2 }
upsDiagSubSysIntBypSwitchFanEstmtdLifetimeRmng OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the time remaining for the module before it should be replaced.
Measured in months. This value is set when you originally install the module."
::= { upsDiagSubSysIntBypSwitchFanLifetimeInfoEntry 3 }
upsDiagSubSysIntBypSwitchFanEstmtdLifetimeRmngPct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the percentage of the total lifetime remaining for the module
before it should be replaced."
::= { upsDiagSubSysIntBypSwitchFanLifetimeInfoEntry 4 }
-- the upsDiagnosticExternalDevices group
upsDiagSwitchGearStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
fail (4),
lostComm (5),
overtemp (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Switch Gear.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
fail(4) indicates the device status has failed.
lostComm(5) indicates the device has lost communication.
overtemp(6) indicates the device has an over temperature condition."
::= { upsDiagSwitchGear 1 }
upsDiagSwitchGearInputSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Switch Gear Input Switch.
unknown(1) indicates the switch status is unknown.
notInstalled(2) indicates the switch is not installed.
opened(3) indicates the switch is opened.
closed(4) indicates the switch is closed."
::= { upsDiagSwitchGear 2 }
upsDiagSwitchGearOutputSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Switch Gear Output Switch.
unknown(1) indicates the switch status is unknown.
notInstalled(2) indicates the switch is not installed.
opened(3) indicates the switch is opened.
closed(4) indicates the switch is closed."
::= { upsDiagSwitchGear 3 }
upsDiagSwitchGearBypassSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Switch Gear Bypass Switch.
unknown(1) indicates the switch status is unknown.
notInstalled(2) indicates the switch is not installed.
opened(3) indicates the switch is opened.
closed(4) indicates the switch is closed."
::= { upsDiagSwitchGear 4 }
upsDiagSwitchGearBypassInputSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Switch Gear Bypass Input Switch.
unknown(1) indicates the switch status is unknown.
notInstalled(2) indicates the switch is not installed.
opened(3) indicates the switch is opened.
closed(4) indicates the switch is closed."
::= { upsDiagSwitchGear 5 }
upsDiagSwitchGearBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of switchgear breakers attached to the UPS."
::= { upsDiagSwitchGear 6 }
upsDiagSwitchGearBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSwitchGearBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switchgear breaker table."
::= { upsDiagSwitchGear 7 }
upsDiagSwitchGearBreakerEntry OBJECT-TYPE
SYNTAX UpsDiagSwitchGearBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of switchgear breakers."
INDEX { switchgearBreakerIndex }
::= { upsDiagSwitchGearBreakerTable 1 }
UpsDiagSwitchGearBreakerEntry ::=
SEQUENCE {
switchgearBreakerIndex
INTEGER,
switchgearBreakerPresent
INTEGER,
switchgearBreakerName
DisplayString,
switchgearBreakerType
INTEGER,
switchgearBreakerStatus
INTEGER
}
switchgearBreakerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the switchgear breaker."
::= { upsDiagSwitchGearBreakerEntry 1 }
switchgearBreakerPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent(1),
present(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the switchgear breaker is present.
notPresent(1) indicates that the breaker is not present.
present(2) indicates that the breaker is present."
::= { upsDiagSwitchGearBreakerEntry 2 }
switchgearBreakerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the switchgear breaker."
::= { upsDiagSwitchGearBreakerEntry 3 }
switchgearBreakerType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
unitInputBreaker(2),
staticSwitchInputBreaker(3),
maintenanceBypassBreaker(4),
unitOutputBreaker(5),
systemIsolationBreaker(6),
batteryBreaker(7),
bypassBackFeedBreaker(8),
internalMaintenanceBypassBreaker(9),
redundantInternalMaintenanceBypassBreaker(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the switchgear breaker types available in the UPS system.
If the UPS is unable to find any attached breakers, this variable
is set to unknown(1). If the system has multiple breakers of the same
type (eg. multiple battery breakers) the status shown in OID
switchgearBreakerStatus will be the aggregated status."
::= { upsDiagSwitchGearBreakerEntry 4 }
switchgearBreakerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
opened(2),
closed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of switchgear breaker.
unknown(1) indicates the breaker status is unknown.
opened (2) indicates the breaker is opened.
closed (3) indicates the breaker is closed.
NOTE: If there are more than one breaker of the same type, the status reflects the aggregated value.
For battery breakers as example, closed would mean that at least one breaker is closed."
::= { upsDiagSwitchGearBreakerEntry 5 }
upsDiagSubFeedBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of subfeed breakers attached to the UPS."
::= { upsDiagSwitchGear 8 }
upsDiagSubFeedBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagSubFeedBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Subfeed breaker table."
::= { upsDiagSwitchGear 9 }
upsDiagSubFeedBreakerEntry OBJECT-TYPE
SYNTAX UpsDiagSubFeedBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of subfeed breakers."
INDEX { subfeedBreakerIndex }
::= { upsDiagSubFeedBreakerTable 1 }
UpsDiagSubFeedBreakerEntry ::=
SEQUENCE {
subfeedBreakerIndex
INTEGER,
subfeedBreakerPresent
INTEGER,
subfeedBreakerRating
INTEGER,
subfeedBreakerUpperAcceptPowerWarning
INTEGER,
subfeedBreakerUpperAcceptPowerCritical
INTEGER,
subfeedBreakerStatus
INTEGER,
subfeedBreakerName
DisplayString,
subfeedBreakerCurrent
INTEGER
}
subfeedBreakerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the subfeed breakers."
::= { upsDiagSubFeedBreakerEntry 1 }
subfeedBreakerPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the subfeed breaker is present.
notPresent (1) indicates that the breaker is not present.
present (2) indicates that the breaker is present."
::= { upsDiagSubFeedBreakerEntry 2 }
subfeedBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current rating of the installed subfeed breaker."
::= { upsDiagSubFeedBreakerEntry 3 }
subfeedBreakerUpperAcceptPowerWarning OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum acceptable load before warning is issued.
Expressed as percent of the subfeed breaker rating."
::= { upsDiagSubFeedBreakerEntry 4 }
subfeedBreakerUpperAcceptPowerCritical OBJECT-TYPE
SYNTAX INTEGER (0..125)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum load before a critical alarm occurs.
Expressed as percent of the subfeed breaker rating."
::= { upsDiagSubFeedBreakerEntry 5 }
subfeedBreakerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Circuit Breaker.
unknown(1) indicates the circuit breaker status is unknown.
notInstalled(2) indicates the circuit breaker is not installed.
opened(3) indicates the circuit breaker is opened.
closed(4) indicates the circuit breaker is closed."
::= { upsDiagSubFeedBreakerEntry 6 }
subfeedBreakerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the subfeed breaker."
::= { upsDiagSubFeedBreakerEntry 7}
subfeedBreakerCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subfeed current in tenths of Amps."
::= { upsDiagSubFeedBreakerEntry 8 }
upsDiagSwitchGearInstallationLoadPct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual output load expressed as a percentage of the rating of the UPS."
::= { upsDiagSwitchGear 10 }
upsDiagSubFeedPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF UPSDiagSubFeedPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of subfeed phase table."
::= { upsDiagSwitchGear 11 }
upsDiagSubFeedPhaseEntry OBJECT-TYPE
SYNTAX UPSDiagSubFeedPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular phase."
INDEX { upsDiagSubFeedPhaseIndex }
::= { upsDiagSubFeedPhaseTable 1 }
UPSDiagSubFeedPhaseEntry ::= SEQUENCE {
upsDiagSubFeedBreakerIndex INTEGER,
upsDiagSubFeedPhaseIndex INTEGER,
upsDiagSubFeedPhaseCurrent INTEGER,
upsDiagSubFeedPhaseCurrentAlternate INTEGER
}
upsDiagSubFeedBreakerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subfeed breaker index."
::= { upsDiagSubFeedPhaseEntry 1 }
upsDiagSubFeedPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subfeed phase index."
::= { upsDiagSubFeedPhaseEntry 2 }
upsDiagSubFeedPhaseCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subfeed phase current in Amps."
::= { upsDiagSubFeedPhaseEntry 3 }
upsDiagSubFeedPhaseCurrentAlternate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subfeed phase current in tenths of Amps."
::= { upsDiagSubFeedPhaseEntry 4 }
upsDiagSwitchgearSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the UPS I/O Cabinet."
::= { upsDiagSwitchGear 12 }
upsDiagSwitchgearAmbientTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ambient temperature of I/O Cabinet in tenths of degrees Celsius."
::= { upsDiagSwitchGear 13 }
upsDiagUsrSuppSwitchgearMonitorTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of user supplied Switch Gear Monitor Boards attached to the UPS."
::= { upsDiagSwitchGear 14 }
upsDiagUsrSuppSwitchgearMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagUsrSuppSwitchgearMonitorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of the user supplied Switch Gear Monitor Board."
::= { upsDiagSwitchGear 15 }
upsDiagUsrSuppSwitchgearMonitorEntry OBJECT-TYPE
SYNTAX UpsDiagUsrSuppSwitchgearMonitorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of the user supplied Switch Gear Monitor Board."
INDEX { upsDiagUsrSuppSwitchgearMonitorIndex}
::= { upsDiagUsrSuppSwitchgearMonitorTable 1 }
UpsDiagUsrSuppSwitchgearMonitorEntry ::=
SEQUENCE {
upsDiagUsrSuppSwitchgearMonitorIndex INTEGER,
upsDiagUsrSuppSwitchgearMonitorStatus INTEGER,
upsDiagUsrSuppSwitchgearMonitorFirmwareRev DisplayString,
upsDiagUsrSuppSwitchgearMonitorHardwareRev DisplayString,
upsDiagUsrSuppSwitchgearMonitorSerialNum DisplayString,
upsDiagUsrSuppSwitchgearMonitorTemperature INTEGER
}
upsDiagUsrSuppSwitchgearMonitorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the user supplied Switch Gear Monitor Board."
::= { upsDiagUsrSuppSwitchgearMonitorEntry 1 }
upsDiagUsrSuppSwitchgearMonitorStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the user supplied Switch Gear Monitor Board.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagUsrSuppSwitchgearMonitorEntry 2 }
upsDiagUsrSuppSwitchgearMonitorFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the user supplied Switch Gear Monitor Board."
::= { upsDiagUsrSuppSwitchgearMonitorEntry 3 }
upsDiagUsrSuppSwitchgearMonitorHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the user supplied Switch Gear Monitor Board."
::= { upsDiagUsrSuppSwitchgearMonitorEntry 4 }
upsDiagUsrSuppSwitchgearMonitorSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the user supplied
Switch Gear Monitor Board."
::= { upsDiagUsrSuppSwitchgearMonitorEntry 5 }
upsDiagUsrSuppSwitchgearMonitorTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the air around the user supplied
Switch Gear Monitor Board in tenths of degrees Celsius."
::= { upsDiagUsrSuppSwitchgearMonitorEntry 6 }
upsDiagMCCBBoxStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the MCCB Box (Molded Case Circuit Breaker Box) external device.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
opened(3) indicates the circuit is opened.
closed(4) indicates the circuit is closed."
::= { upsDiagMCCBBox 1 }
upsDiagTransformerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
fail (4),
lostComm (5),
overtemp (6),
opened (7),
closed (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the External Transformer.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
fail(4) indicates the device status has failed.
lostComm(5) indicates the device has lost communication.
overtemp(6) indicates the device has an over temperature condition.
opened(7) indicates the circuit is opened.
closed(8) indicates the circuit is closed."
::= { upsDiagTransformer 1 }
upsDiagFlyWheelStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
present(2),
notPresent(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the status of flywheel connected to UPS. If the UPS
is unable to determine the state of flywheel, this variable is
set to unknown(1)."
::= { upsDiagFlyWheel 1 }
-- the upsDiagnosticComBus group
upsDiagComBusInternalMIMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
lostComm (4),
rxFailure (5),
txFailure (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the internal MIM communication bus.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
lostComm(4) indicates the device has lost communication.
rxFailure(5) indicates the device has a receive failure.
txFailure(6) indicates the device has a transmit failure."
::= { upsDiagnosticComBus 1 }
upsDiagComBusInternalRIMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
lostComm (4),
rxFailure (5),
txFailure (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the internal RIM communication bus.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
lostComm(4) indicates the device has lost communication.
rxFailure(5) indicates the device has a receive failure.
txFailure(6) indicates the device has a transmit failure."
::= { upsDiagnosticComBus 2 }
upsDiagComBusMIMtoRIMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
lostComm (4),
rxFailure (5),
txFailure (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the MIM to RIM communication bus.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
lostComm(4) indicates the device has lost communication.
rxFailure(5) indicates the device has a receive failure.
txFailure(6) indicates the device has a transmit failure."
::= { upsDiagnosticComBus 3 }
upsDiagComBusExternalMIMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
lostComm (4),
rxFailure (5),
txFailure (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the external MIM communication bus.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
lostComm(4) indicates the device has lost communication.
rxFailure(5) indicates the device has a receive failure.
txFailure(6) indicates the device has a transmit failure."
::= { upsDiagnosticComBus 4 }
upsDiagComBusExternalRIMStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
ok (3),
lostComm (4),
rxFailure (5),
txFailure (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the external RIM communication bus.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
ok(3) indicates the device status is OK.
lostComm(4) indicates the device has lost communication.
rxFailure(5) indicates the device has a receive failure.
txFailure(6) indicates the device has a transmit failure."
::= { upsDiagnosticComBus 5 }
-- the upsDiagnosticPowerCabinet group
upsDiagnosticPowerCabinetTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of Power Cabinets supported by the UPS."
::= { upsDiagnosticPowerCabinet 1 }
upsDiagnosticPowerCabinetTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagnosticPowerCabinetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual Power Cabinets.
The number of entries is contained in the upsDiagnosticPowerCabinetTableSize OID."
::= { upsDiagnosticPowerCabinet 2 }
upsDiagnosticPowerCabinetEntry OBJECT-TYPE
SYNTAX UpsDiagnosticPowerCabinetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of a Power Cabinet."
INDEX { upsDiagnosticPowerCabinetIndex}
::= { upsDiagnosticPowerCabinetTable 1 }
UpsDiagnosticPowerCabinetEntry ::=
SEQUENCE {
upsDiagnosticPowerCabinetIndex INTEGER,
upsDiagnosticPowerCabinetAmbientTemperature INTEGER
}
upsDiagnosticPowerCabinetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Power Cabinet."
::= { upsDiagnosticPowerCabinetEntry 1 }
upsDiagnosticPowerCabinetAmbientTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ambient temperature of Power Cabinet in tenths of degrees Celsius.
If the Power Cabinet is not present, this variable is set to (-1)."
::= { upsDiagnosticPowerCabinetEntry 2 }
-- the upsDiagnosticDisplay group
upsDiagnosticDisplayHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Display."
::= { upsDiagnosticDisplay 1 }
upsDiagnosticDisplaySerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Display."
::= { upsDiagnosticDisplay 2 }
upsDiagnosticDisplayFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Display."
::= { upsDiagnosticDisplay 3 }
upsDiagnosticDisplayModelNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the Display."
::= { upsDiagnosticDisplay 4 }
upsDiagnosticDisplayStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The System Level Controller Status.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagnosticDisplay 5 }
-- the upsDiagnosticSLC group
upsDiagnosticSLCHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the System Level Controller."
::= { upsDiagnosticSLC 1 }
upsDiagnosticSLCSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the System Level Controller."
::= { upsDiagnosticSLC 2 }
upsDiagnosticSLCFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the System Level Controller."
::= { upsDiagnosticSLC 3 }
upsDiagnosticSLCModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Model number of the System Level Controller."
::= { upsDiagnosticSLC 4 }
upsDiagSLCStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The System Level Controller Status.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagnosticSLC 5 }
-- upsDiagnosticTemperature
upsDiagnosticTemperatureAmbientTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ambient temperature in tenths of degrees Celsius.
If not available, this variable is set to (-1999)."
::= { upsDiagnosticTemperature 1 }
-- upsDiagnosticUnitContoller group
upsDiagUnitControllerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Unit Controllers in or attached to the UPS."
::= { upsDiagnosticUnitController 1 }
upsDiagUnitControllerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDiagUnitControllerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of individual Intelligence Modules. The number of
entries is contained in the upsDiagUnitControllerTableSize OID."
::= { upsDiagnosticUnitController 2 }
upsDiagUnitControllerEntry OBJECT-TYPE
SYNTAX UpsDiagUnitControllerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics and information of an Intelligence Module."
INDEX { upsDiagUnitControllerIndex}
::= { upsDiagUnitControllerTable 1 }
UpsDiagUnitControllerEntry ::=
SEQUENCE {
upsDiagUnitControllerIndex INTEGER,
upsDiagUnitControllerStatus INTEGER,
upsDiagUnitControllerFirmwareRev DisplayString,
upsDiagUnitControllerHardwareRev DisplayString,
upsDiagUnitControllerSerialNum DisplayString,
upsDiagUnitControllerModelNum DisplayString
}
upsDiagUnitControllerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Unit Controller entry."
::= { upsDiagUnitControllerEntry 1 }
upsDiagUnitControllerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
offOk (3),
onOk (4),
offFail (5),
onFail (6),
lostComm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Unit Controller.
unknown(1) indicates the device status is unknown.
notInstalled(2) indicates the device is not installed.
offOk(3) indicates the device status is off and OK.
onOk(4) indicates the device status is on and OK.
offFail(5) indicates the device status is off and failed.
onFail(6) indicates the device status is on and failed.
lostComm(7) indicates the device has lost communication."
::= { upsDiagUnitControllerEntry 2 }
upsDiagUnitControllerFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Unit Controller."
::= { upsDiagUnitControllerEntry 3 }
upsDiagUnitControllerHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Unit Controller."
::= { upsDiagUnitControllerEntry 4 }
upsDiagUnitControllerSerialNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the Unit Controller."
::= { upsDiagUnitControllerEntry 5 }
upsDiagUnitControllerModelNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the Unit Controller."
::= { upsDiagUnitControllerEntry 6 }
-- the upsParallelSystem group
upsParallelSysLocalAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the UPS ID number in the parallel system."
::= { upsParallelSystem 1 }
upsParallelSysRemoteAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the total number of UPSs in parallel."
::= { upsParallelSystem 2 }
upsParallelSysRedundancy OBJECT-TYPE
SYNTAX INTEGER {
nplus0 (1),
nplus1 (2),
nplus2 (3),
nplus3 (4),
nplus4 (5),
nplus5 (6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The redundancy warning level for paralleled UPS
nplus0 (1) indicates that there are no redundant units.
nplus1 (2) indicates that there is one redundant unit.
nplus2 (3) indicates that there are two redundant units.
nplus3 (4) indicates that there are three redundant units.
nplus4 (5) indicates that there are four redundant unit.
nplus5 (6) indicates that there are five redundant units."
::= { upsParallelSystem 3 }
upsParallelInputMaximumCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum input RMS current of the parallel system
measured in Amperes."
::= { upsParallelSystem 4 }
upsParallelTotalOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Total Output power of UPS in kW
when UPS are configured in parallel
or -1 if it's unsupported by this UPS."
::= { upsParallelSystem 5 }
upsParallelTotalOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Total Output Apparent power of UPS in kVA
when UPS are configured in parallel
or -1 if it's unsupported by this UPS."
::= { upsParallelSystem 6 }
-- Parallel Input Phase Table
upsParallelInputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsParallelInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries."
::= { upsParallelSystem 7 }
upsParallelInputPhaseEntry OBJECT-TYPE
SYNTAX UpsParallelInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input phase."
INDEX { upsParallelInputPhaseTableIndex, upsParallelInputPhaseIndex }
::= { upsParallelInputPhaseTable 1 }
UpsParallelInputPhaseEntry ::= SEQUENCE {
upsParallelInputPhaseTableIndex INTEGER,
upsParallelInputPhaseIndex INTEGER,
upsParallelInputCurrent INTEGER,
upsParallelInputActivePower INTEGER,
upsParallelInputApparentPower INTEGER,
upsParallelInputVoltage INTEGER,
upsParallelInputMaxVoltage INTEGER,
upsParallelInputMaxCurrent INTEGER,
upsParallelInputTotalActivePower INTEGER,
upsParallelInputTotalApparentPower INTEGER
}
upsParallelInputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The parallel unit identifier."
::= { upsParallelInputPhaseEntry 1 }
upsParallelInputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input phase identifier."
::= { upsParallelInputPhaseEntry 2 }
upsParallelInputCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input current in amperes, or -1 if it's
unsupported by this UPS."
::= { upsParallelInputPhaseEntry 3 }
upsParallelInputActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input power in kW, or -1 if it's
unsupported by this UPS."
::= { upsParallelInputPhaseEntry 4 }
upsParallelInputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input apparent power in kVA, or -1 if it's
unsupported by this UPS."
::= { upsParallelInputPhaseEntry 5 }
upsParallelInputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage of UPS in volts, or -1 if it's
unsupported by this UPS."
::= { upsParallelInputPhaseEntry 6 }
upsParallelInputMaxVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The peak input voltage in VAC measured since the last reset,
or -1 if it's unsupported by this UPS."
::= { upsParallelInputPhaseEntry 7 }
upsParallelInputMaxCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The peak input current in amperes measured since last reset,
or -1 if it's unsupported by this UPS."
::= { upsParallelInputPhaseEntry 8 }
upsParallelInputTotalActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total active input power of the parallel system in kW."
::= { upsParallelInputPhaseEntry 9 }
upsParallelInputTotalApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total apparent input power of the parallel system in kVA."
::= { upsParallelInputPhaseEntry 10 }
-- Parallel Output Phase Table
upsParallelOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsParallelOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of
entries is given by the sum of the upsPhaseNumOutputPhases."
::= { upsParallelSystem 8 }
upsParallelOutputPhaseEntry OBJECT-TYPE
SYNTAX UpsParallelOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output phase."
INDEX { upsParallelOutputPhaseTableIndex, upsParallelOutputPhaseIndex }
::= { upsParallelOutputPhaseTable 1 }
UpsParallelOutputPhaseEntry ::= SEQUENCE {
upsParallelOutputPhaseTableIndex INTEGER,
upsParallelOutputPhaseIndex INTEGER,
upsParallelOutputCurrent INTEGER,
upsParallelOutputLoad INTEGER,
upsParallelOutputPercentLoad INTEGER,
upsParallelOutputPower INTEGER
}
upsParallelOutputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { upsParallelOutputPhaseEntry 1 }
upsParallelOutputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output phase identifier."
::= { upsParallelOutputPhaseEntry 2 }
upsParallelOutputCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current in amperes drawn
by the load on the UPS, or -1 if it's unsupported
by this UPS."
::= { upsParallelOutputPhaseEntry 3 }
upsParallelOutputLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output load in VA, or -1 if it's unsupported
by this UPS."
::= { upsParallelOutputPhaseEntry 4 }
upsParallelOutputPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the UPS load capacity in VA at
present redundancy being used on this output phase,
or -1 if it's unsupported by this UPS."
::= { upsParallelOutputPhaseEntry 5 }
upsParallelOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output power in Watts, or -1 if it's
unsupported by this UPS."
::= { upsParallelOutputPhaseEntry 6 }
-- Parallel Output Apparent Power Table
upsParallelOutputApparentPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsParallelOutputApparentPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of entries
is given by the value of upsOutputNumPhases."
::= { upsParallelSystem 9 }
upsParallelOutputApparentPowerEntry OBJECT-TYPE
SYNTAX UpsParallelOutputApparentPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { upsParallelOutputApparentPowerTableIndex }
::= { upsParallelOutputApparentPowerTable 1 }
UpsParallelOutputApparentPowerEntry ::= SEQUENCE {
upsParallelOutputApparentPowerTableIndex INTEGER,
upsParallelOutputApparentPower INTEGER
}
upsParallelOutputApparentPowerTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS parallel output identifier."
::= { upsParallelOutputApparentPowerEntry 1 }
upsParallelOutputApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The apparent power of each of UPS in kVA
when UPS are configured in parallel."
::= { upsParallelOutputApparentPowerEntry 2 }
upsParallelDiagSubSysBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsParallelDiagSubSysBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for diagnostics of parallel Circuit Breakers."
::= { upsParallelSystem 10 }
upsParallelDiagSubSysBreakerEntry OBJECT-TYPE
SYNTAX UpsParallelDiagSubSysBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics of Circuit Breaker."
INDEX { upsParallelDiagSubSysBreakerFrameIndex, upsParallelDiagSubSysBreakerIndex}
::= { upsParallelDiagSubSysBreakerTable 1 }
UpsParallelDiagSubSysBreakerEntry ::=
SEQUENCE {
upsParallelDiagSubSysBreakerFrameIndex INTEGER,
upsParallelDiagSubSysBreakerIndex INTEGER,
upsParallelDiagSubSysBreakerStatus INTEGER,
upsParallelDiagSubSysBreakerName DisplayString
}
upsParallelDiagSubSysBreakerFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Parallel UPS index entry."
::= { upsParallelDiagSubSysBreakerEntry 1 }
upsParallelDiagSubSysBreakerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the Circuit Breaker."
::= { upsParallelDiagSubSysBreakerEntry 2 }
upsParallelDiagSubSysBreakerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
notInstalled (2),
opened (3),
closed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Circuit Breaker.
unknown(1) indicates the circuit breaker status is unknown.
notInstalled(2) indicates the circuit breaker is not installed.
opened(3) indicates the circuit breaker is opened.
closed(4) indicates the circuit breaker is closed."
::= { upsParallelDiagSubSysBreakerEntry 3 }
upsParallelDiagSubSysBreakerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of Circuit Breaker."
::= { upsParallelDiagSubSysBreakerEntry 4 }
upsParallelOutputTotalPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the UPS total load capacity in kVA
or -1 if it's unsupported by this UPS."
::= { upsParallelSystem 11 }
-- Parallel Output Active Power Table
upsParallelOutputActivePowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsParallelOutputActivePowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of entries
is given by the value of upsParallelSysRemoteAddress."
::= { upsParallelSystem 12 }
upsParallelOutputActivePowerEntry OBJECT-TYPE
SYNTAX UpsParallelOutputActivePowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { upsParallelOutputActivePowerTableIndex }
::= { upsParallelOutputActivePowerTable 1 }
UpsParallelOutputActivePowerEntry ::= SEQUENCE {
upsParallelOutputActivePowerTableIndex INTEGER,
upsParallelOutputActivePower INTEGER
}
upsParallelOutputActivePowerTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS parallel output identifier."
::= { upsParallelOutputActivePowerEntry 1 }
upsParallelOutputActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The active power of each UPS in kW
when UPSs are configured in parallel."
::= { upsParallelOutputActivePowerEntry 2 }
upsParallelSysSwitchGearInstallationLoadPct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual output load expressed as a percentage of the rating of the
Parallel UPS system."
::= { upsParallelSystem 13 }
upsParallelSysRedundancyStatus OBJECT-TYPE
SYNTAX INTEGER {
nplus0 (1),
nplus1 (2),
nplus2 (3),
nplus3 (4),
nplus4 (5),
nplus5 (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the number of backup or redundant UPSs set up on the parallel system.
nplus0 (1) no redundant units.
nplus1 (2) one redundant unit.
nplus2 (3) two redundant units.
nplus3 (4) three redundant units.
nplus4 (5) four redundant units.
nplus5 (6) five redundant units."
::= { upsParallelSystem 14 }
upsParallelSysName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ID string for the group of UPS units in the same parallel system.
Some products do not allow write operations for this OID."
::= { upsParallelSystem 15 }
upsParallelSysUpsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of UPSs in parallel."
::= { upsParallelSystem 16 }
upsParallelSysUpsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsParallelSysUpsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of UPS table entries. The number of entries
is given by the value of upsParallelSysUpsTableize."
::= { upsParallelSystem 17 }
upsParallelSysUpsEntry OBJECT-TYPE
SYNTAX UpsParallelSysUpsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular UPS in parallel."
INDEX { upsParallelSysUpsIndex}
::= { upsParallelSysUpsTable 1 }
UpsParallelSysUpsEntry ::=
SEQUENCE {
upsParallelSysUpsIndex INTEGER,
upsParallelSysUpsName DisplayString,
upsParallelSysUpsAlarmStatus INTEGER,
upsParallelSysUpsMode INTEGER,
upsParallelSysUpsSerialNumber DisplayString
}
upsParallelSysUpsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Parallel System UPS table entry."
::= { upsParallelSysUpsEntry 1 }
upsParallelSysUpsName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS id as assigned by the system."
::= { upsParallelSysUpsEntry 2 }
upsParallelSysUpsAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
normal (2),
informational (3),
warning (4),
critical (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the UPS.
unknown(1) indicates the UPS status is unknown.
normal(2) indicates UPS is functioning normally.
informational(3) indicates informational alarm present in the UPS.
warning(4) indicates warning alarm present in the UPS.
critical(5) indicates critical alarm present in the UPS."
::= { upsParallelSysUpsEntry 3 }
upsParallelSysUpsMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
onLine(2),
onBattery(3),
onBatteryTest(4),
requestedStaticBypass(5),
forcedBypass(6),
maintenanceBypass(7),
off(8),
ecoMode(9),
hotStandby(10),
inquiring(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operating mode of the UPS. If the UPS is unable to
determine the state of the UPS, this variable is set
to unknown(1)."
::= { upsParallelSysUpsEntry 4 }
upsParallelSysUpsSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Serial number of the UPS in parallel.
Equivalent to OID 1.3.6.1.4.1.318.1.1.1.1.2.3 (upsAdvIdentSerialNumber)."
::= { upsParallelSysUpsEntry 5 }
upsParallelNumOfUpsPoweringLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of UPS powered and protecting the load which are not defective
(no battery fault, no internal fault)."
::= { upsParallelSystem 18 }
upsParallelMinNumOfRequiredUps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimal number of UPS required to guarantee the availability of power."
::= { upsParallelSystem 19 }
-- the upsPhysicalLayout group
upsIOFrameLayoutPositionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the position ID of UPS frame."
::= { upsPhysicalLayout 1 }
upsBottomFeedFrameLayoutPositionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the position ID of bottom feed frame."
::= { upsPhysicalLayout 2 }
upsSwitchGearLayoutPositionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the position ID of switchgear."
::= { upsPhysicalLayout 3 }
-- the upsBatteryFrameLayoutTable subgroup
upsBatteryFrameLayoutTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of battery frames."
::= { upsPhysicalLayout 4 }
upsBatteryFrameLayoutTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsBatteryFrameLayoutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Battery frame layout position ID table."
::= { upsPhysicalLayout 5 }
upsBatteryFrameLayoutEntry OBJECT-TYPE
SYNTAX UpsBatteryFrameLayoutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of layout position IDs of battery frames."
INDEX { batteryFrameIndex }
::= { upsBatteryFrameLayoutTable 1 }
UpsBatteryFrameLayoutEntry ::=
SEQUENCE {
batteryFrameIndex
INTEGER,
batteryFramePositionID
INTEGER
}
batteryFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the battery frame."
::= { upsBatteryFrameLayoutEntry 1 }
batteryFramePositionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the position ID of each of the battery frames in the row."
::= { upsBatteryFrameLayoutEntry 2 }
-- the upsSideCarFrameLayoutTable subgroup
upsSideCarFrameLayoutTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of sidecar frames."
::= { upsPhysicalLayout 6 }
upsSideCarFrameLayoutTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsSideCarFrameLayoutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Sidecar frame layout position ID table."
::= { upsPhysicalLayout 7 }
upsSideCarFrameLayoutEntry OBJECT-TYPE
SYNTAX UpsSideCarFrameLayoutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of sidecar frame layout position IDs."
INDEX { sideCarFrameIndex }
::= { upsSideCarFrameLayoutTable 1 }
UpsSideCarFrameLayoutEntry ::=
SEQUENCE {
sideCarFrameIndex
INTEGER,
sideCarFramePositionID
INTEGER
}
sideCarFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the sidecar frame."
::= { upsSideCarFrameLayoutEntry 1 }
sideCarFramePositionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the position ID of each of the sidecar frames in the row."
::= { upsSideCarFrameLayoutEntry 2 }
-- the upsPowerFrameLayoutTable subgroup
upsPowerFrameLayoutTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of power frames."
::= { upsPhysicalLayout 8 }
upsPowerFrameLayoutTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsPowerFrameLayoutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Power frame layout position ID table."
::= { upsPhysicalLayout 9 }
upsPowerFrameLayoutEntry OBJECT-TYPE
SYNTAX UpsPowerFrameLayoutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of power frame layout position IDs."
INDEX { powerFrameIndex }
::= { upsPowerFrameLayoutTable 1 }
UpsPowerFrameLayoutEntry ::=
SEQUENCE {
powerFrameIndex
INTEGER,
powerFramePositionID
INTEGER
}
powerFrameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the power frame."
::= { upsPowerFrameLayoutEntry 1 }
powerFramePositionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the position ID of each of the power frames in the row."
::= { upsPowerFrameLayoutEntry 2 }
-- the upsIntegratedATS group
upsIntegratedATSSelectedSource OBJECT-TYPE
SYNTAX INTEGER {
noSourceSelected (1),
unknown (2),
sourceA (3),
sourceB (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source which is currently selected by the ATS to supply the UPS."
::= { upsIntegratedATS 1 }
upsIntegratedATSPreferredSource OBJECT-TYPE
SYNTAX INTEGER {
upsIntegratedATSNoSourcePreference (1),
upsIntegratedATSPreferSourceA (2),
upsIntegratedATSPreferSourceB (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preferred source of power when both sources are OK."
::= { upsIntegratedATS 2 }
upsIntegratedATSUpsReturnStaggering OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a delay factor applied to the retransfer of this UPS with integrated ATS.
When multiple UPSs are in use from a single source, each UPS can have a unique delay value,
which will reduce inrush by preventing all UPSs from transferring at the same time."
::= { upsIntegratedATS 3 }
upsIntegratedATSSourceTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input sources for this integrated ATS."
::= { upsIntegratedATS 4 }
upsIntegratedATSSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsIntegratedATSSourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting status and settings for the ATS input sources.
The number of entries is contained in the upsIntegratedATSSourceTableSize OID."
::= { upsIntegratedATS 5 }
upsIntegratedATSSourceEntry OBJECT-TYPE
SYNTAX UpsIntegratedATSSourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input source status to get."
INDEX { upsIntegratedATSSourceIndex}
::= { upsIntegratedATSSourceTable 1 }
UpsIntegratedATSSourceEntry ::=
SEQUENCE {
upsIntegratedATSSourceIndex INTEGER,
upsIntegratedATSSourceName DisplayString,
upsIntegratedATSSourceStatus INTEGER,
upsIntegratedATSLineFailDelay INTEGER,
upsIntegratedATSLineStabilityDelay INTEGER
}
upsIntegratedATSSourceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the input source entry."
::= { upsIntegratedATSSourceEntry 1 }
upsIntegratedATSSourceName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the input source. This OID is provided
for informational purposes only."
::= { upsIntegratedATSSourceEntry 2 }
upsIntegratedATSSourceStatus OBJECT-TYPE
SYNTAX INTEGER {
upsIntegratedATSSourceGood (1),
upsIntegratedATSSourceBad (2),
upsIntegratedATSSourceUnknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the input source status."
::= { upsIntegratedATSSourceEntry 3 }
upsIntegratedATSLineFailDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay between a selected input source becoming bad, and the ATS switching away from that source.
This delay is used to make sure that the line has truly failed before the ATS will be switched.
Specified in seconds."
::= { upsIntegratedATSSourceEntry 4 }
upsIntegratedATSLineStabilityDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay between an unselected input source becoming good, and the ATS switching to that source.
This delay is used to make sure that the line has truly returned before the ATS will be switched.
Specified in seconds."
::= { upsIntegratedATSSourceEntry 5 }
-- the upsDCOutput group
upsDCOutputStatus OBJECT IDENTIFIER ::= { upsDCOutput 1 }
upsDCOutputStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC outputs on the UPS."
::= { upsDCOutputStatus 1 }
upsDCOutputStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UpsDCOutputStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Provides status information on UPS DC outputs.
The number of entries is contained in the upsDCOutputStatusTableSize OID."
::= { upsDCOutputStatus 2 }
upsDCOutputStatusEntry OBJECT-TYPE
SYNTAX UpsDCOutputStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The DC output."
INDEX { upsDCOutputStatusTableIndex}
::= { upsDCOutputStatusTable 1 }
UpsDCOutputStatusEntry ::=
SEQUENCE {
upsDCOutputStatusTableIndex INTEGER,
upsDCOutputStatusVoltageNominal INTEGER,
upsDCOutputStatusCurrentRating INTEGER,
upsDCOutputStatusVoltage INTEGER,
upsDCOutputStatusCurrent INTEGER,
upsDCOutputStatusAbnormalConditions DisplayString
}
upsDCOutputStatusTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC output status entry."
::= { upsDCOutputStatusEntry 1 }
upsDCOutputStatusVoltageNominal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The desired voltage for this output in tenths of VDC.
When the output is on and there are no fault conditions,
the actual voltage should be near the nominal."
::= { upsDCOutputStatusEntry 2 }
upsDCOutputStatusCurrentRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of current this output is able to supply in
tenths of amperes."
::= { upsDCOutputStatusEntry 3 }
upsDCOutputStatusVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage measured on this output in tenths of VDC."
::= { upsDCOutputStatusEntry 4 }
upsDCOutputStatusCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current drawn by the load measured on this output
in tenths of amperes."
::= { upsDCOutputStatusEntry 5 }
upsDCOutputStatusAbnormalConditions OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing flags representing active
output faults. If the Network Card is unable to determine
the state of the faults, this variable is set to 'UNKNOWN'.
The flags are numbered 1 onward, read from left to
right. The flags are defined as follows starting from 1:
Flag 1: Output Overload
Flag 2: Output Short Circuit
Flag 3: Output Over Voltage
Flag 4: <Not Used>
Flag 5: Overtemperature
Flag 6: Backfeed Relay Fault
Flag 7: <Not Used>
Flag 8: PFC Input Relay Fault
Flag 9: <Not Used>
Flag 10: Bypass Relay Fault
Flag 11: <Not Used>
Flag 12: <Not Used>
Flag 13: <Not Used>
Flag 14: <Not Used>
Flag 15: <Not Used>
Flag 16: <Not Used>
Flag 17: <Not Used>
Flag 18: <Not Used>
Flag 19: Output Fault (over or undervoltage)
Flag 20: Bus Converter Fault
Flag 21: Sensor Fault
Flag 21: <Not Used>
Flag 22: <Not Used>
Flag 23: <Not Used>
Flag 24: <Not Used>
Flag 25: <Not Used>
Flag 26: <Not Used>
Flag 27: <Not Used>
Flag 28: <Not Used>
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>"
::= { upsDCOutputStatusEntry 6 }
-- the serialPort2Config group
serialPort2Mode OBJECT-TYPE
SYNTAX INTEGER {
localConsole(1),
passthrough(2)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Setting this variable to passthrough will enable mini's port2
behave like a UPS port. Choosing localConsole will enable the port
to be used as local console."
::= { serialPort2Config 1 }
-- the serialPort2Control group
setPulseOnTXD OBJECT-TYPE
SYNTAX INTEGER {
noSetPulseOnTXD(1),
setPulseOnTXD(2),
setTXDLow(3),
setTXDHigh(4)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Setting this variable to setPulseOnTXD(2)
causes adapter to generate a PULSE on TXD pin of serial port 2.
The duration in the prototype implementation will be 1 second.
Setting this value to noSetPulseOnTXD(1) has no
effect.
The value noSetPulseOnTXD(1) will always be returned
when the variable is read.
Setting this value to setTXDLow(3), or setTXDHigh(4) will keep TXD
always low or high respectively."
::= { serialPort2Control 1 }
-- the sPDUIdent group
sPDUIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the PDU. This value
is set at the factory."
::= { sPDUIdent 1 }
sPDUIdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An 8 byte ID string identifying the PDU firmware revision.
This value is set at the factory."
::= { sPDUIdent 2 }
sPDUIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the PDU was manufactured in mm/dd/yy format.
This value is set at the factory. The year 2000 will be
represented by 00."
::= { sPDUIdent 3 }
sPDUIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10-character string identifying the model number of
the PDU internal. This value is set at the factory."
::= { sPDUIdent 4 }
sPDUIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 12-character string identifying the serial number of
the PDU internal microprocessor. This value is set at
the factory."
::= { sPDUIdent 5 }
-- the sPDUMasterControl group
sPDUMasterControlSwitch OBJECT-TYPE
SYNTAX INTEGER {
turnAllOnNow (1),
turnAllOnSequence (2),
turnAllOffNow (3),
rebootAllNow (4),
rebootAllSequence (5),
noCommand (6),
turnAllOffSequence (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to turnAllOnNow (1) will turn all outlets
on immediately.
Setting this OID to turnAllOnSequence (2) will turn all outlets
on as defined by each outlet's sPDUOutletPowerOnTime OID value.
Setting this OID to turnAllOff (3) will turn all outlets
off immediately.
Setting this OID to rebootAllNow (4) will reboot all outlets
immediately.
For MasterSwitch firmware version 1.X, setting this OID to
rebootAllSequence (5) reboots all outlets, with power returned
to the outlets in the sequence defined by each outlet's
sPDUOutletPowerOnTime OID value.
For MasterSwitch firmware version 2.X, setting this OID to
rebootAllSequence (5) will cause a turnAllOffSequence to be performed.
Once all outlets are off, the MasterSwitch will then delay the
sPDUMasterConfigReboot OID time, and then perform a turnAllOnSequence.
For MasterSwitch firmware version 2.X, setting this OID to
turnAllOffSequence (7) will turn all outlets off as defined by
each outlet's sPDUOutletPowerOffTime OID value.
For MasterSwitch firmware version 1.X, setting this OID to
turnAllOffSequence (7) will have no effect.
Getting this OID will return the noCommand (6) value."
::= { sPDUMasterControl 1 }
sPDUMasterState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will cause the status of all outlets to be
returned. This OID is provided for informational purposes only.
To change the outlet state, the user should use the sPDUOutletCtl
OID in the sPDUOutletControlTable.
The format of the data returned is a character string consisting
of the word 'On' if the outlet is on or 'Off' if the outlet is
off. At least one space will delimit each outlet entry in the
string.
If the outlet states are unknown, the character string 'Unknown'
will be returned. This signifies that there is an inconsistency
in the PDU. In the rare case that this should happen, the user
is advised to shut down all equipment powered by the PDU and
then cycle the PDU's power. This will put the PDU in a consistent
state."
::= { sPDUMasterControl 2 }
sPDUMasterPending OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will cause the command pending status of all outlets to be returned.
The format of the data returned is a character string consisting
of the word 'Yes' if a command is pending for the outlet or 'No'
if there is no command pending for the outlet. At least one
space will delimit each outlet entry in the string.
If the pending states are unknown, the character string 'Unknown'
will be returned. This signifies that there is an inconsistency
in the PDU. In the rare case that this should happen, the user
is advised to shut down all equipment powered by the PDU and then
cycle the PDU's power. This will put the PDU in a consistent state."
::= { sPDUMasterControl 3 }
-- the sPDUMasterConfig group
sPDUMasterConfigPowerOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in seconds, between when
power is provided to the PDU and when the PDU
provides basic master power to the outlets.
Allowed values are:
-1 never apply power automatically.
0 apply power immediately.
15 apply power in 15 seconds.
30 apply power in 30 seconds.
45 apply power in 45 seconds.
60 apply power in 60 seconds (1 minute).
120 apply power in 120 seconds (2 minutes).
300 apply power in 300 seconds (5 minutes).
If a value other than a supported value is provided in a
set request, the PDU interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { sPDUMasterConfig 1 }
sPDUMasterConfigReboot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait,
in seconds, after turning the power off, at the start
of the sequence, before turning power back on, at the
end of the reboot sequence.
Allowed values are:
5 wait 5 seconds between off/on.
10 wait 10 seconds between off/on.
15 wait 15 seconds between off/on.
20 wait 20 seconds between off/on.
30 wait 30 seconds between off/on.
45 wait 45 seconds between off/on.
60 wait 60 seconds (1 minute) between off/on.
If a value other than a supported value is provided in a
set request, the PDU interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used.
This OID is read-only for the MasterSwitch version 2.X and is the
maximum sPDUOutletRebootDuration OID of the individual outlets."
::= { sPDUMasterConfig 2 }
sPDUMasterConfigPDUName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the PDU."
::= { sPDUMasterConfig 3 }
-- the sPDUOutletControl group
sPDUOutletControlTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outlets for the PDU."
::= { sPDUOutletControl 1 }
sPDUOutletControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual outlet switches. The number of
entries is contained in the sPDUOutletControlTableSize OID."
::= { sPDUOutletControl 2 }
sPDUOutletControlEntry OBJECT-TYPE
SYNTAX SPDUOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to control."
INDEX { sPDUOutletControlIndex}
::= { sPDUOutletControlTable 1 }
SPDUOutletControlEntry ::=
SEQUENCE {
sPDUOutletControlIndex INTEGER,
sPDUOutletPending INTEGER,
sPDUOutletCtl INTEGER,
sPDUOutletCtlName DisplayString
}
sPDUOutletControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletControlEntry 1 }
sPDUOutletPending OBJECT-TYPE
SYNTAX INTEGER{
commandPending (1),
noCommandPending (2),
commandPendingUnknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reports whether the current outlet has a pending command.
If the commandPendingUnknown (3) value is returned, all
devices powered by the PDU should be shut down. The PDU's
power should then be cycled to clear this condition."
::= { sPDUOutletControlEntry 2 }
sPDUOutletCtl OBJECT-TYPE
SYNTAX INTEGER {
outletOn (1),
outletOff (2),
outletReboot (3),
outletUnknown (4),
outletOnWithDelay (5),
outletOffWithDelay (6),
outletRebootWithDelay (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the outletOn (1) value will be returned.
If the outlet is off, the outletOff (2) value will be
returned.
If the state of the outlet cannot be determined, the
outletUnknown (4) value will be returned. If the
outletUnknown condition should occur, all devices
powered by the PDU should be shut down. The PDU's power
should then be cycled to clear this condition.
Setting this variable to outletOn (1) will turn the outlet on.
Setting this variable to outletOff (2) will turn the outlet off.
Setting this variable to outletReboot (3) will reboot the outlet.
Setting this variable to outletOnWithDelay (5) will turn the outlet on
after the sPDUOutletPowerOnTime OID has elapsed. This option is not
valid for MasterSwitch firmware version 1.X.
Setting this variable to outletOffWithDelay (6) will turn the outlet off
after the sPDUOutletPowerOffTime OID has elapsed. This option is not valid
for MasterSwitch firmware version 1.X.
Setting this variable to outletRebootWithDelay (7) will turn the outlet off
after the sPDUOutletPowerOffTime OID has elapsed, wait the sPDUOutletRebootDuration
OID time, then turn the outlet back on.
This option is not valid for MasterSwitch firmware version 1.X."
::= { sPDUOutletControlEntry 3 }
sPDUOutletCtlName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. Maximum size is 20 characters.
This OID is provided for informational purposes only.
This value is set by the sPDUOutletName OID."
::= { sPDUOutletControlEntry 4 }
-- the sPDUOutletConfig group
sPDUOutletConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outlets for the PDU."
::= { sPDUOutletConfig 1 }
sPDUOutletConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The list of outlets to configure. The number of
entries is defined by the sPDUOutletConfigTableSize
OID."
::= { sPDUOutletConfig 2 }
sPDUOutletConfigEntry OBJECT-TYPE
SYNTAX SPDUOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to control."
INDEX { sPDUOutletConfigIndex}
::= { sPDUOutletConfigTable 1 }
SPDUOutletConfigEntry ::=
SEQUENCE {
sPDUOutletConfigIndex INTEGER,
sPDUOutletPowerOnTime INTEGER,
sPDUOutletName DisplayString,
sPDUOutletPowerOffTime INTEGER,
sPDUOutletRebootDuration INTEGER
}
sPDUOutletConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletConfigEntry 1 }
sPDUOutletPowerOnTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (in seconds) the outlet will delay
powering on when the MasterSwitch is powered on.
Allowed values are:
-1 never power on automatically.
0 power on with the Master Switch.
15 power on 15 seconds after the MasterSwitch has power applied.
30 power on 30 seconds after the MasterSwitch has power applied.
45 power on 45 seconds after the MasterSwitch has power applied.
60 power on 60 seconds (1 minute) after the MasterSwitch has power applied.
120 power on 120 seconds (2 minutes) after the MasterSwitch has power applied.
300 power on 300 seconds (5 minutes) after the MasterSwitch has power applied.
If a value other than a supported value is provided in a
set request, the PDU interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { sPDUOutletConfigEntry 2 }
sPDUOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the outlet. Maximum size is 20 characters."
::= { sPDUOutletConfigEntry 3 }
sPDUOutletPowerOffTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (in seconds) the outlet will delay
powering off.
Allowed values are:
-1 never power off automatically.
0 power off with the MasterSwitch.
15 power off 15 seconds after being commanded.
30 power off 30 seconds after being commanded.
45 power off 45 seconds after being commanded.
60 power off 60 seconds (1 minute) after being commanded.
120 power off 120 seconds (2 minutes) after being commanded.
300 power off 300 seconds (5 minutes) after being commanded.
If a value other than a supported value is provided in a
set request, the PDU interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used.
This OID is not available for MasterSwitch firmware version 1.X."
::= { sPDUOutletConfigEntry 4 }
sPDUOutletRebootDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait,
in seconds, after turning the power off, at the start
of the sequence, before turning power back on, at the
end of the reboot sequence.
Allowed values are:
5 wait 5 seconds between off/on.
10 wait 10 seconds between off/on.
15 wait 15 seconds between off/on.
20 wait 20 seconds between off/on.
30 wait 30 seconds between off/on.
45 wait 45 seconds between off/on.
60 wait 60 seconds (1 minute) between off/on.
If a value other than a supported value is provided in a
set request, the PDU interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used.
This OID is not available for MasterSwitch firmware version 1.X."
::= { sPDUOutletConfigEntry 5 }
-- the sPDUIdentVM group
sPDUIdentVMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch VMs controllable
by this IP address."
::= { sPDUIdentVM 1 }
sPDUIdentVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUIdentVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for query of the individual MasterSwitch VMs.
The number of entries is contained in the
sPDUIdentVMTableSize OID."
::= { sPDUIdentVM 2 }
sPDUIdentVMEntry OBJECT-TYPE
SYNTAX SPDUIdentVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch VMs to query."
INDEX { sPDUIdentVMIndex}
::= { sPDUIdentVMTable 1 }
SPDUIdentVMEntry ::=
SEQUENCE {
sPDUIdentVMIndex INTEGER,
sPDUIdentNameVM DisplayString,
sPDUIdentHardwareRevVM DisplayString,
sPDUIdentFirmwareRevVM DisplayString,
sPDUIdentDateOfManufactureVM DisplayString,
sPDUIdentModelNumberVM DisplayString,
sPDUIdentSerialNumberVM DisplayString
}
sPDUIdentVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM entry."
::= { sPDUIdentVMEntry 1 }
sPDUIdentNameVM OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 23-character string identifying the
MasterSwitch VM. "
::= { sPDUIdentVMEntry 2 }
sPDUIdentHardwareRevVM OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware version of the MasterSwitch VM.
This value is set at the factory."
::= { sPDUIdentVMEntry 3 }
sPDUIdentFirmwareRevVM OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An 6-character ID string identifying the MasterSwitch VM
firmware version. This value is set at the factory."
::= { sPDUIdentVMEntry 4 }
sPDUIdentDateOfManufactureVM OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the MasterSwitch VM was manufactured in mm/dd/yyyy format.
This value is set at the factory. "
::= { sPDUIdentVMEntry 5 }
sPDUIdentModelNumberVM OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 17-character string identifying the model number of
the MasterSwitch VM. This value is set at the factory."
::= { sPDUIdentVMEntry 6 }
sPDUIdentSerialNumberVM OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 17-character string identifying the serial number of
the MasterSwitch VM. This value is set at the factory."
::= { sPDUIdentVMEntry 7 }
-- the sPDUMasterControlVM group
sPDUMasterControlVMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch VMs controllable
by this IP address."
::= { sPDUMasterControlVM 1 }
sPDUMasterControlVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUMasterControlVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of the individual MasterSwitch VMs.
The number of entries is contained in the
sPDUMasterControlVMTableSize OID."
::= { sPDUMasterControlVM 2 }
sPDUMasterControlVMEntry OBJECT-TYPE
SYNTAX SPDUMasterControlVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch VMs to control."
INDEX { sPDUMasterControlVMIndex}
::= { sPDUMasterControlVMTable 1 }
SPDUMasterControlVMEntry ::=
SEQUENCE {
sPDUMasterControlVMIndex INTEGER,
sPDUMasterControlVMName DisplayString,
sPDUMasterControlVMCommand INTEGER
}
sPDUMasterControlVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM entry."
::= { sPDUMasterControlVMEntry 1 }
sPDUMasterControlVMName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch VM. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigVMName OID."
::= { sPDUMasterControlVMEntry 2 }
sPDUMasterControlVMCommand OBJECT-TYPE
SYNTAX INTEGER {
noCommandAllVM (1),
immediateAllOnVM (2),
immediateAllOffVM (3),
immediateAllRebootVM (4),
delayedAllOnVM (5),
delayedAllOffVM (6),
sequencedAllRebootVM (7),
delayedAllRebootVM (8),
delayedSequenceAllRebootVM (9),
cancelAllPendingCommandsVM (10),
audioAlarmMute (11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to immediateAllOnVM (2) will turn all outlets
on immediately.
Setting this OID to immediateAllOffVM (3) will turn all outlets
off immediately.
Setting this OID to immediateAllRebootVM (4) will reboot all outlets
immediately.
Setting this OID to delayedAllOnVM (5) will turn all outlets on as
defined by each outlet's sPDUOutletConfigVMPowerOnTime OID value.
Setting this OID to delayedAllOffVM (6) will turn all outlets
off as defined by each outlet's sPDUOutletConfigVMPowerOffTime OID value.
Setting this OID to sequencedAllRebootVM (7) will cause a
immediateAllOffVM command to be performed. The MasterSwitch VM will
then delay the sPDUMasterStatusVMRebootDuration OID time, and then
perform a delayedAllOnVM command.
Setting this OID to delayedAllRebootVM (8) will cause a delayedAllOffVM
command to be performed. Each outlet will then wait its
sPDUOutletConfigVMRebootDuration before returning power to the outlet.
Setting this OID to delayedSequenceAllRebootVM (9) will cause a
delayedAllOffVM command to be performed. Once all outlets are off,
the MasterSwitch VM will then delay the sPDUMasterStatusVMRebootDuration
OID time, and then perform a delayedAllOnVM command.
Setting this OID to cancelAllPendingCommandsVM (10) will cause all pending
commands on the MasterSwitch VM to be canceled.
Setting this OID to audioAlarmMute (11) will temporarily silence the audible
alarm for the duration of the current overload condition. The audible alarm
will be activated on subsequent overload alarms.
Getting this OID will return the noCommandAllVM (1) value."
::= { sPDUMasterControlVMEntry 3 }
-- the sPDUMasterConfigVM group
sPDUMasterConfigVMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch VMs configurable
by this IP address."
::= { sPDUMasterConfigVM 1 }
sPDUMasterConfigVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUMasterConfigVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of the individual MasterSwitch VMs.
The number of entries is contained in the
sPDUMasterConfigVMTableSize OID."
::= { sPDUMasterConfigVM 2 }
sPDUMasterConfigVMEntry OBJECT-TYPE
SYNTAX SPDUMasterConfigVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch VMs to configure."
INDEX { sPDUMasterConfigVMIndex}
::= { sPDUMasterConfigVMTable 1 }
SPDUMasterConfigVMEntry ::=
SEQUENCE {
sPDUMasterConfigVMIndex INTEGER,
sPDUMasterConfigVMName DisplayString,
sPDUMasterConfigVMColdstartDelay INTEGER,
sPDUMasterConfigVMAudioAlarmActivated INTEGER,
sPDUMasterConfigVMHighLoadWarningThreshold INTEGER,
sPDUMasterConfigVMLowLoadWarningThreshold INTEGER,
sPDUMasterConfigVMOverloadRestriction INTEGER
}
sPDUMasterConfigVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM entry."
::= { sPDUMasterConfigVMEntry 1 }
sPDUMasterConfigVMName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch VM. Maximum size is 23 characters."
::= { sPDUMasterConfigVMEntry 2 }
sPDUMasterConfigVMColdstartDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in seconds, between when
power is provided to the MasterSwitch VM and
when the MasterSwitch VM provides basic master
power to the outlets.
Allowed values are:
-1 never apply power automatically.
0 apply power immediately.
15 apply power in 15 seconds.
30 apply power in 30 seconds.
45 apply power in 45 seconds.
60 apply power in 60 seconds (1 minute).
120 apply power in 120 seconds (2 minutes).
300 apply power in 300 seconds (5 minutes).
If a value other than a supported value is provided in a
set request, the MasterSwitch VM interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { sPDUMasterConfigVMEntry 3 }
sPDUMasterConfigVMAudioAlarmActivated OBJECT-TYPE
SYNTAX INTEGER {
audioAlarmActiveNever (1),
audioAlarmActiveOnOverload (2),
audioAlarmActiveOnOverloadImminent (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to audioAlarmActiveNever (1) will disable
the audio alarm on the MasterSwitch VM.
Setting this OID to audioAlarmActiveOnOverload (2) will
activate the audio alarm on the MasterSwitch VM when an
overload condition is present.
Setting this OID to audioAlarmActiveOnOverloadImminent (3)
will activate the audio alarm on the MasterSwitch VM when
the load on the MasterSwitch VM has surpassed the
sPDUMasterConfigVMHighLoadWarningThreshold OID value."
::= { sPDUMasterConfigVMEntry 4 }
sPDUMasterConfigVMHighLoadWarningThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing an overload condition. It is
represented as a percentage of full load."
::= { sPDUMasterConfigVMEntry 5 }
sPDUMasterConfigVMLowLoadWarningThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is
represented as a percentage of full load."
::= { sPDUMasterConfigVMEntry 6 }
sPDUMasterConfigVMOverloadRestriction OBJECT-TYPE
SYNTAX INTEGER {
alwaysAllowTurnON (1),
restrictOnWarning (2),
restrictOnOverload (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID controls the behavior of the MasterSwitch VM
when an overload condition is possible and additional
outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow
the outlets to turn on.
Setting this OID to restrictOnWarning (2) will not allow
outlets to turn on if the sPDUMasterConfigVMHighLoadWarningThreshold
OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow
outlets to turn on if the MasterSwitch Vm is in an
overload condition."
::= { sPDUMasterConfigVMEntry 7 }
-- the sPDUMasterStatusVM group
sPDUMasterStatusVMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch VMs at
this IP address."
::= { sPDUMasterStatusVM 1 }
sPDUMasterStatusVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUMasterStatusVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for gathering of status from the individual
MasterSwitch VMs. The number of entries is contained
in the sPDUMasterStatusVMTableSize OID."
::= { sPDUMasterStatusVM 2 }
sPDUMasterStatusVMEntry OBJECT-TYPE
SYNTAX SPDUMasterStatusVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch VMs to gather status from."
INDEX { sPDUMasterStatusVMIndex}
::= { sPDUMasterStatusVMTable 1 }
SPDUMasterStatusVMEntry ::=
SEQUENCE {
sPDUMasterStatusVMIndex INTEGER,
sPDUMasterStatusVMName DisplayString,
sPDUMasterStatusVMCommandPending INTEGER,
sPDUMasterStatusVMOverloadCondition INTEGER,
sPDUMasterStatusVMLowLoadCondition INTEGER,
sPDUMasterStatusVMCurrentLoad INTEGER,
sPDUMasterStatusVMMaxLoad INTEGER,
sPDUMasterStatusVMOutletCount INTEGER,
sPDUMasterStatusVMRebootDuration INTEGER
}
sPDUMasterStatusVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM entry."
::= { sPDUMasterStatusVMEntry 1 }
sPDUMasterStatusVMName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch VM. Maximum size is 23 characters."
::= { sPDUMasterStatusVMEntry 2 }
sPDUMasterStatusVMCommandPending OBJECT-TYPE
SYNTAX INTEGER {
commandPendingMasterTrueVM (1),
commandPendingMasterFalseVM (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return commandPendingMasterTrueVM (1)
if the MasterSwitch VM has a pending command on any of its
outlets.
commandPendingMasterFalseVM (2) will be returned if there are
no pending commands."
::= { sPDUMasterStatusVMEntry 3 }
sPDUMasterStatusVMOverloadCondition OBJECT-TYPE
SYNTAX INTEGER {
overloadConditionTrueVM (1),
overloadConditionFalseVM (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return overloadConditionTrueVM (1)
if the sPDUMasterConfigVMHighLoadWarningThreshold OID is
violated.
overloadConditionFalseVM (2) will be returned if the
sPDUMasterConfigVMHighLoadWarningThreshold OID is not
violated."
::= { sPDUMasterStatusVMEntry 4 }
sPDUMasterStatusVMLowLoadCondition OBJECT-TYPE
SYNTAX INTEGER {
lowLoadConditionTrueVM (1),
lowLoadConditionFalseVM (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return lowLoadConditionTrueVM (1)
if the sPDUMasterConfigVMLowLoadWarningThreshold OID is
violated.
lowLoadConditionFalseVM (2) will be returned if the
sPDUMasterConfigVMHighLoadWarningThreshold OID is not
violated. "
::= { sPDUMasterStatusVMEntry 5 }
sPDUMasterStatusVMCurrentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the total amount of power
being consumed by the load. It is represented as a
percentage of full load."
::= { sPDUMasterStatusVMEntry 6 }
sPDUMasterStatusVMMaxLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the total amount of power
that this MasterSwitch VM can provide. It is represented
in Amps."
::= { sPDUMasterStatusVMEntry 7 }
sPDUMasterStatusVMOutletCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the number of controllable
outlets for this MasterSwitch VM."
::= { sPDUMasterStatusVMEntry 8 }
sPDUMasterStatusVMRebootDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the largest
sPDUOutletConfigVMRebootDuration OID time
for this MasterSwitch VM."
::= { sPDUMasterStatusVMEntry 9 }
-- the sPDUOutletControlVM group
sPDUOutletControlVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletControlVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual outlet switches. The number of
entries is contained in the sPDUMasterStatusOutletCount OID."
::= { sPDUOutletControlVM 1 }
sPDUOutletControlVMEntry OBJECT-TYPE
SYNTAX SPDUOutletControlVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to control."
INDEX { sPDUOutletControlVMIndex, sPDUOutletControlVMOutletIndex }
::= { sPDUOutletControlVMTable 1 }
SPDUOutletControlVMEntry ::=
SEQUENCE {
sPDUOutletControlVMIndex INTEGER,
sPDUOutletControlVMName DisplayString,
sPDUOutletControlVMOutletIndex INTEGER,
sPDUOutletControlVMOutletName DisplayString,
sPDUOutletControlVMOutletCommand INTEGER
}
sPDUOutletControlVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM."
::= { sPDUOutletControlVMEntry 1 }
sPDUOutletControlVMName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch VM. Maximum size is 23 characters.
This OID is provided for informational purposes only."
::= { sPDUOutletControlVMEntry 2 }
sPDUOutletControlVMOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletControlVMEntry 3 }
sPDUOutletControlVMOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. Maximum size is 23 characters.
This OID is provided for informational purposes only."
::= { sPDUOutletControlVMEntry 4 }
sPDUOutletControlVMOutletCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateOnVM (1),
immediateOffVM (2),
immediateRebootVM (3),
delayedOnVM (4),
delayedOffVM (5),
delayedRebootVM (6),
cancelPendingCommandVM (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the immediateOnVM (1) value will be returned.
If the outlet is off, the immediateOffVM (2) value will be
returned.
Setting this variable to immediateOnVM (1) will immediately turn the outlet on.
Setting this variable to immediateOffVM (2) will immediately turn the outlet off.
Setting this variable to immediateRebootVM (3) will immediately reboot the outlet.
Setting this variable to delayedOnVM (4) will turn the outlet on
after the sPDUOutletConfigVMPowerOnTime OID time has elapsed.
Setting this variable to delayedOffVM (5) will turn the outlet off
after the sPDUOutletConfigVMPowerOffTime OID time has elapsed.
Setting this variable to delayedRebootVM (6) will cause the
MasterSwitch VM to perform a delayedOffVM command, wait the
sPDUOutletConfigVMRebootDuration OID time, and then perform the
immediateOnVM command.
Setting this variable to cancelPendingCommandVM (7) will cause any
pending command to this outlet to be canceled."
::= { sPDUOutletControlVMEntry 5 }
-- the sPDUOutletConfigVM group
sPDUOutletConfigVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletConfigVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the sPDUMasterStatusOutletCount OID."
::= { sPDUOutletConfigVM 1 }
sPDUOutletConfigVMEntry OBJECT-TYPE
SYNTAX SPDUOutletConfigVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to configure."
INDEX { sPDUOutletConfigVMIndex, sPDUOutletConfigVMOutletIndex }
::= { sPDUOutletConfigVMTable 1 }
SPDUOutletConfigVMEntry ::=
SEQUENCE {
sPDUOutletConfigVMIndex INTEGER,
sPDUOutletConfigVMName DisplayString,
sPDUOutletConfigVMOutletIndex INTEGER,
sPDUOutletConfigVMOutletName DisplayString,
sPDUOutletConfigVMPowerOnTime INTEGER,
sPDUOutletConfigVMPowerOffTime INTEGER,
sPDUOutletConfigVMRebootDuration INTEGER
}
sPDUOutletConfigVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM."
::= { sPDUOutletConfigVMEntry 1 }
sPDUOutletConfigVMName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch VM. Maximum size is 23 characters."
::= { sPDUOutletConfigVMEntry 2 }
sPDUOutletConfigVMOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletConfigVMEntry 3 }
sPDUOutletConfigVMOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the outlet. Maximum size is 23 characters."
::= { sPDUOutletConfigVMEntry 4 }
sPDUOutletConfigVMPowerOnTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (in seconds) the outlet will delay
powering on at coldstart or when a command that requires
a turn-on delay is issued.
Allowed values are:
-1 never power on.
0 power on immediately.
15 power on 15 seconds after being commanded.
30 power on 30 seconds after being commanded.
45 power on 45 seconds after being commanded.
60 power on 60 seconds (1 minute) after being commanded.
120 power on 120 seconds (2 minutes) after being commanded.
300 power on 300 seconds (5 minutes) after being commanded.
If a value other than a supported value is provided in a
set request, the MasterSwitch VM interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { sPDUOutletConfigVMEntry 5 }
sPDUOutletConfigVMPowerOffTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (in seconds) the outlet will delay
powering off when a command that requires
a turn-off delay is issued.
Allowed values are:
-1 never power off automatically.
0 power off immediately.
15 power off 15 seconds after being commanded.
30 power off 30 seconds after being commanded.
45 power off 45 seconds after being commanded.
60 power off 60 seconds (1 minute) after being commanded.
120 power off 120 seconds (2 minutes) after being commanded.
300 power off 300 seconds (5 minutes) after being commanded.
If a value other than a supported value is provided in a
set request, the MasterSwitch VM interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { sPDUOutletConfigVMEntry 6 }
sPDUOutletConfigVMRebootDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait,
in seconds, after turning the power off, at the start
of the sequence, before turning power back on, at the
end of the reboot sequence.
Allowed values are:
5 wait 5 seconds between off/on.
10 wait 10 seconds between off/on.
15 wait 15 seconds between off/on.
20 wait 20 seconds between off/on.
30 wait 30 seconds between off/on.
45 wait 45 seconds between off/on.
60 wait 60 seconds (1 minute) between off/on.
If a value other than a supported value is provided in a
set request, the MasterSwitch VM interprets it as the next lower
acceptable value. If the provided value is lower than
the lowest acceptable value, the lowest acceptable
value is used."
::= { sPDUOutletConfigVMEntry 7 }
-- the sPDUOutletStatusVM group
sPDUOutletStatusVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletStatusVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of individual outlets. The number of
entries is contained in the sPDUMasterStatusOutletCount OID."
::= { sPDUOutletStatusVM 1 }
sPDUOutletStatusVMEntry OBJECT-TYPE
SYNTAX SPDUOutletStatusVMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to gather status from."
INDEX { sPDUOutletStatusVMIndex, sPDUOutletStatusVMOutletIndex }
::= { sPDUOutletStatusVMTable 1 }
SPDUOutletStatusVMEntry ::=
SEQUENCE {
sPDUOutletStatusVMIndex INTEGER,
sPDUOutletStatusVMName DisplayString,
sPDUOutletStatusVMOutletIndex INTEGER,
sPDUOutletStatusVMOutletName DisplayString,
sPDUOutletStatusVMOutletState INTEGER,
sPDUOutletStatusVMCommandPending INTEGER
}
sPDUOutletStatusVMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch VM."
::= { sPDUOutletStatusVMEntry 1 }
sPDUOutletStatusVMName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch VM. Maximum size is 23 characters."
::= { sPDUOutletStatusVMEntry 2 }
sPDUOutletStatusVMOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletStatusVMEntry 3 }
sPDUOutletStatusVMOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. Maximum size is 23 characters."
::= { sPDUOutletStatusVMEntry 4 }
sPDUOutletStatusVMOutletState OBJECT-TYPE
SYNTAX INTEGER {
outletStatusVMOn (1),
outletStatusVMOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the outletStatusOnVM (1) value will be returned.
If the outlet is off, the outletStatusOffVM (2) value will be
returned. "
::= { sPDUOutletStatusVMEntry 5 }
sPDUOutletStatusVMCommandPending OBJECT-TYPE
SYNTAX INTEGER {
outletStatusVMCommandPending (1),
outletStatusVMNoCommandPending (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the command pending
state of the outlet. If a command is pending on the
outlet, the outletStatusVMCommandPending (1) value
will be returned. If there is not a command pending
on the outlet, the outletStatusVMNoCommandPending (2)
will be returned."
::= { sPDUOutletStatusVMEntry 6 }
-- the sPDUIdentMSP group
sPDUIdentMSPTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch pluses controllable
by this IP address."
::= { sPDUIdentMSP 1 }
sPDUIdentMSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUIdentMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for query of the individual MasterSwitch pluses.
The number of entries is contained in the
sPDUIdentMSPTableSize OID."
::= { sPDUIdentMSP 2 }
sPDUIdentMSPEntry OBJECT-TYPE
SYNTAX SPDUIdentMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch pluses to query."
INDEX { sPDUIdentMSPIndex}
::= { sPDUIdentMSPTable 1 }
SPDUIdentMSPEntry ::=
SEQUENCE {
sPDUIdentMSPIndex INTEGER,
sPDUIdentNameMSP DisplayString,
sPDUIdentHardwareRevMSP DisplayString,
sPDUIdentFirmwareRevMSP DisplayString,
sPDUIdentDateOfManufactureMSP DisplayString,
sPDUIdentModelNumberMSP DisplayString,
sPDUIdentSerialNumberMSP DisplayString
}
sPDUIdentMSPIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus entry."
::= { sPDUIdentMSPEntry 1 }
sPDUIdentNameMSP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUIdentMSPEntry 2 }
sPDUIdentHardwareRevMSP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware version of the MasterSwitch plus.
This value is set at the factory."
::= { sPDUIdentMSPEntry 3 }
sPDUIdentFirmwareRevMSP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An 6-character ID string identifying the MasterSwitch plus
firmware version. This value is set at the factory."
::= { sPDUIdentMSPEntry 4 }
sPDUIdentDateOfManufactureMSP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the MasterSwitch plus was manufactured in mm/dd/yyyy format.
This value is set at the factory. "
::= { sPDUIdentMSPEntry 5 }
sPDUIdentModelNumberMSP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 17-character string identifying the model number of
the MasterSwitch plus. This value is set at the factory."
::= { sPDUIdentMSPEntry 6 }
sPDUIdentSerialNumberMSP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 17-character string identifying the serial number of
the MasterSwitch plus. This value is set at the factory."
::= { sPDUIdentMSPEntry 7 }
-- the sPDUMasterControlMSP group
sPDUMasterControlMSPTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch pluses controllable
by this IP address."
::= { sPDUMasterControlMSP 1 }
sPDUMasterControlMSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUMasterControlMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of the individual MasterSwitch pluses.
The number of entries is contained in the
sPDUMasterControlMSPTableSize OID."
::= { sPDUMasterControlMSP 2 }
sPDUMasterControlMSPEntry OBJECT-TYPE
SYNTAX SPDUMasterControlMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch pluses to control."
INDEX { sPDUMasterControlMSPIndex}
::= { sPDUMasterControlMSPTable 1 }
SPDUMasterControlMSPEntry ::=
SEQUENCE {
sPDUMasterControlMSPIndex INTEGER,
sPDUMasterControlMSPName DisplayString,
sPDUMasterControlMSPCommand INTEGER
}
sPDUMasterControlMSPIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus entry."
::= { sPDUMasterControlMSPEntry 1 }
sPDUMasterControlMSPName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUMasterControlMSPEntry 2 }
sPDUMasterControlMSPCommand OBJECT-TYPE
SYNTAX INTEGER {
noCommandAllMSP (1),
immediateAllOnMSP (2),
sequencedAllOnMSP (3),
immediateAllOffMSP (4),
gracefulAllRebootMSP (5),
immediateAllRebootMSP (6),
gracefulAllShutdownMSP (7),
overrideAllBatCapThreshMSP (8),
cancelAllPendingCommandsMSP (9),
restoreFactoryDefaultsMSP (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to immediateAllOnMSP (2) will turn all outlets
on immediately.
Setting this OID to sequencedAllOnMSP (3) will turn all outlets
on as defined by each outlet's sPDUOutletConfigMSPPowerOnDelay OID value.
Setting this OID to immediateAllOffMSP (4) will turn all outlets
off immediately.
Setting this OID to gracefulAllRebootMSP (5) will reboot all outlets
(after the device running PowerChute confirms shutdown) as defined
by each outlet's sPDUOutletConfigMSPRebootDuration OID time value.
Setting this OID to immediateAllRebootMSP (6) will reboot all outlets
immediately.
Setting this OID to gracefulAllShutdownMSP (7) will shutdown all outlets
(after the device running PowerChute confirms shutdown) as defined
by each outlet's sPDUOutletConfigMSPPowerOffDelay OID time value. Each
outlet will then turn on after the sum of its
sPDUOutletConfigMSPRestartDelay and sPDUOutletConfigMSPPowerOnDelay OID
values.
Setting this OID to overrideAllBatCapThreshMSP (8) will cause the
outlet to ignore the Battery Capacity Threshold and proceed turning on
the outlets as defined by each outlet's sPDUOutletConfigMSPPowerOnDelay
OID value.
Setting this OID to cancelAllPendingCommandsMSP (9) will cause all pending
commands on the MasterSwitch plus to be canceled.
Setting this OID to restoreFactoryDefaultsMSP (10) will cause the settings of
the MasterSwitch plus to be restored to the factory defaults.
Getting this OID will return the noCommandAllMSP (1) value."
::= { sPDUMasterControlMSPEntry 3 }
-- the sPDUMasterConfigMSP group
sPDUMasterConfigMSPTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch pluses configurable
by this IP address."
::= { sPDUMasterConfigMSP 1 }
sPDUMasterConfigMSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUMasterConfigMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of the individual MasterSwitch pluses.
The number of entries is contained in the
sPDUMasterConfigMSPTableSize OID."
::= { sPDUMasterConfigMSP 2 }
sPDUMasterConfigMSPEntry OBJECT-TYPE
SYNTAX SPDUMasterConfigMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch pluses to configure."
INDEX { sPDUMasterConfigMSPIndex}
::= { sPDUMasterConfigMSPTable 1 }
SPDUMasterConfigMSPEntry ::=
SEQUENCE {
sPDUMasterConfigMSPIndex INTEGER,
sPDUMasterConfigMSPName DisplayString,
sPDUMasterConfigMSPPowerOnTimeDelay INTEGER,
sPDUMasterConfigMSPManualButton INTEGER
}
sPDUMasterConfigMSPIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus entry."
::= { sPDUMasterConfigMSPEntry 1 }
sPDUMasterConfigMSPName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. Maximum size is 23 characters."
::= { sPDUMasterConfigMSPEntry 2 }
sPDUMasterConfigMSPPowerOnTimeDelay OBJECT-TYPE
SYNTAX INTEGER (0..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in seconds, between when
power is provided to the MasterSwitch plus and
when the MasterSwitch plus provides basic master
power to the outlets.
Allowed values are:
0 - 9999 seconds (0 - 2hrs, 46 mins, 39 secs).
0 indicates to apply power immediately."
::= { sPDUMasterConfigMSPEntry 3 }
sPDUMasterConfigMSPManualButton OBJECT-TYPE
SYNTAX INTEGER {
manualButtonDisabled (1),
manualButtonEnabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to manualButtonDisabled (1) will disable
the manual button on the MasterSwitch plus.
Setting this OID to manualButtonEnabled (2) will enable
the manual button on the MasterSwitch plus."
::= { sPDUMasterConfigMSPEntry 4 }
-- the sPDUMasterStatusMSP group
sPDUMasterStatusMSPTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MasterSwitch pluses at
this IP address."
::= { sPDUMasterStatusMSP 1 }
sPDUMasterStatusMSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUMasterStatusMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for gathering of status from the individual
MasterSwitch pluses. The number of entries is contained
in the sPDUMasterStatusMSPTableSize OID."
::= { sPDUMasterStatusMSP 2 }
sPDUMasterStatusMSPEntry OBJECT-TYPE
SYNTAX SPDUMasterStatusMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MasterSwitch pluses to gather status from."
INDEX { sPDUMasterStatusMSPIndex}
::= { sPDUMasterStatusMSPTable 1 }
SPDUMasterStatusMSPEntry ::=
SEQUENCE {
sPDUMasterStatusMSPIndex INTEGER,
sPDUMasterStatusMSPName DisplayString,
sPDUMasterStatusMSPOutletCount INTEGER
}
sPDUMasterStatusMSPIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus entry."
::= { sPDUMasterStatusMSPEntry 1 }
sPDUMasterStatusMSPName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUMasterStatusMSPEntry 2 }
sPDUMasterStatusMSPOutletCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the number of controllable
outlets for this MasterSwitch plus."
::= { sPDUMasterStatusMSPEntry 3 }
-- the sPDUOutletControlMSP group
sPDUOutletControlMSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletControlMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual outlet switches. The number of
entries is contained in the sPDUMasterStatusMSPOutletCount OID."
::= { sPDUOutletControlMSP 1 }
sPDUOutletControlMSPEntry OBJECT-TYPE
SYNTAX SPDUOutletControlMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to control."
INDEX { sPDUOutletControlMSPIndex, sPDUOutletControlMSPOutletIndex }
::= { sPDUOutletControlMSPTable 1 }
SPDUOutletControlMSPEntry ::=
SEQUENCE {
sPDUOutletControlMSPIndex INTEGER,
sPDUOutletControlMSPName DisplayString,
sPDUOutletControlMSPOutletIndex INTEGER,
sPDUOutletControlMSPOutletName DisplayString,
sPDUOutletControlMSPOutletCommand INTEGER
}
sPDUOutletControlMSPIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus."
::= { sPDUOutletControlMSPEntry 1 }
sPDUOutletControlMSPName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUOutletControlMSPEntry 2 }
sPDUOutletControlMSPOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletControlMSPEntry 3 }
sPDUOutletControlMSPOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only."
::= { sPDUOutletControlMSPEntry 4 }
sPDUOutletControlMSPOutletCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateOnMSP (1),
delayedOnMSP (2),
immediateOffMSP (3),
gracefulRebootMSP (4),
immediateRebootMSP (5),
gracefulshutdownMSP (6),
overrideBatCapThreshMSP (7),
cancelPendingCommandMSP (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the immediateOnMSP (1) value will be returned.
If the outlet is off, the immediateOffMSP (3) value will be
returned.
Setting this variable to immediateOnMSP (1) will immediately turn the outlet on.
Setting this variable to delayedOnMSP (2) will turn the outlet on
after the sPDUOutletConfigMSPPowerOnDelay OID time has elapsed.
Setting this variable to immediateOffMSP (3) will immediately turn the outlet off.
Setting this variable to gracefulRebootMSP (4) will cause the outlet to wait for
device confirmation (if applicable) and then turn the outlet off after the
sPDUOutletConfigMSPPowerOffDelay OID time has elapsed. The outlet will then turn
on after the sPDUOutletConfigMSPRebootDuration OID time has elapsed.
Setting this variable to immediateRebootMSP (5) will immediately reboot the outlet.
Setting this variable to gracefulshutdownMSP (6) will cause the outlet to wait for
device confirmation (if applicable) and then turn the outlet off after the
sPDUOutletConfigMSPPowerOffDelay OID time has elapsed. The outlet will then turn
on after the sum of the sPDUOutletConfigMSPRestartTime OID time and the
sPDUOutletConfigMSPPowerOnDelay OID time has elapsed.
Setting this variable to overrideBatCapThreshMSP (7) will cause the outlet to
ignore the Battery Capacity Threshold and proceed waiting on the
sPDUOutletConfigMSPPowerOnDelay OID time before turning the outlet on.
Setting this variable to cancelPendingCommandMSP (8) will cause any
pending command to this outlet to be canceled."
::= { sPDUOutletControlMSPEntry 5 }
-- the sPDUOutletConfigMSPall group
sPDUOutletConfigMSPallTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletConfigMSPallEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the sPDUMasterStatusMSPOutletCount OID."
::= { sPDUOutletConfigMSPall 1 }
sPDUOutletConfigMSPallEntry OBJECT-TYPE
SYNTAX SPDUOutletConfigMSPallEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to configure."
INDEX { sPDUOutletConfigMSPallIndex, sPDUOutletConfigMSPallOutletIndex }
::= { sPDUOutletConfigMSPallTable 1 }
SPDUOutletConfigMSPallEntry ::=
SEQUENCE {
sPDUOutletConfigMSPallIndex INTEGER,
sPDUOutletConfigMSPallName DisplayString,
sPDUOutletConfigMSPallOutletIndex INTEGER,
sPDUOutletConfigMSPallOutletName DisplayString,
sPDUOutletConfigMSPallOutletCtrlMode INTEGER
}
sPDUOutletConfigMSPallIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus."
::= { sPDUOutletConfigMSPallEntry 1 }
sPDUOutletConfigMSPallName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUOutletConfigMSPallEntry 2 }
sPDUOutletConfigMSPallOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletConfigMSPallEntry 3 }
sPDUOutletConfigMSPallOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the outlet. Maximum size is 23 characters."
::= { sPDUOutletConfigMSPallEntry 4 }
sPDUOutletConfigMSPallOutletCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
modeGracefulShutdown (1),
modeAnnunciator (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to modeGracefulShutdown (1) will put this
outlet into the Graceful Shutdown control mode.
Setting this OID to modeAnnunciator (2) will put this outlet
into the Annunciator control mode."
::= { sPDUOutletConfigMSPallEntry 5 }
-- the sPDUOutConfigMSPgs group
sPDUOutletConfigMSPgsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletConfigMSPgsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the sPDUMasterStatusMSPOutletCount OID."
::= { sPDUOutletConfigMSPgs 1 }
sPDUOutletConfigMSPgsEntry OBJECT-TYPE
SYNTAX SPDUOutletConfigMSPgsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to configure."
INDEX { sPDUOutletConfigMSPgsIndex, sPDUOutletConfigMSPgsOutletIndex }
::= { sPDUOutletConfigMSPgsTable 1 }
SPDUOutletConfigMSPgsEntry ::=
SEQUENCE {
sPDUOutletConfigMSPgsIndex INTEGER,
sPDUOutletConfigMSPgsName DisplayString,
sPDUOutletConfigMSPgsOutletIndex INTEGER,
sPDUOutletConfigMSPgsOutletName DisplayString,
sPDUOutletConfigMSPgsOutletCtrlMode INTEGER,
sPDUOutletConfigMSPgsDeviceConfirm INTEGER,
sPDUOutletConfigMSPgsLowBattWarning INTEGER,
sPDUOutletConfigMSPgsLowBattMult INTEGER,
sPDUOutletConfigMSPgsRestartDelay INTEGER,
sPDUOutletConfigMSPgsPowerOnDelay INTEGER,
sPDUOutletConfigMSPgsPowerOffDelay INTEGER,
sPDUOutletConfigMSPgsBattCapThresh INTEGER,
sPDUOutletConfigMSPgsRebootDuration INTEGER
}
sPDUOutletConfigMSPgsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus."
::= { sPDUOutletConfigMSPgsEntry 1 }
sPDUOutletConfigMSPgsName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUOutletConfigMSPgsEntry 2 }
sPDUOutletConfigMSPgsOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletConfigMSPgsEntry 3 }
sPDUOutletConfigMSPgsOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only."
::= { sPDUOutletConfigMSPgsEntry 4 }
sPDUOutletConfigMSPgsOutletCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
modeGracefulShutdown (1),
modeAnnunciator (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Control Mode of the outlet.
This OID is provided for informational purposes only."
::= { sPDUOutletConfigMSPgsEntry 5 }
sPDUOutletConfigMSPgsDeviceConfirm OBJECT-TYPE
SYNTAX INTEGER {
deviceConfirmNo (1),
deviceConfirmYes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to deviceConfirmNo (1) cause the outlet to
NOT wait for device confirmation while performing graceful
operations.
Setting this OID to deviceConfirmYes (2) cause the outlet to
wait for device confirmation while performing graceful
operations."
::= { sPDUOutletConfigMSPgsEntry 6 }
sPDUOutletConfigMSPgsLowBattWarning OBJECT-TYPE
SYNTAX INTEGER (-2..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in 6 second intervals, between
when the UPS goes on battery and the power down sequence for
the outlet is initiated.
Allowed values are:
-2 - Never initiate the power down sequence on low battery warning.
-1 - Initiate power down sequence based on remaining runtime.
1 - 9999 six second intervals (6 secs - 16hrs, 39 mins, 54 secs).
0 indicates to immediately initiate power down sequence on low
battery warning."
::= { sPDUOutletConfigMSPgsEntry 7 }
sPDUOutletConfigMSPgsLowBattMult OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Only applicable if sPDUOutletConfigMSPgsLowBattWarning OID is
set to -1 (On Runtime Remaining).
Allows you to set the value to stagger the shutdown sequence of the outlets.
1 provides the longest delay (the outlet to shutoff first), and 7 would
provide the shortest delay (the outlet to shut off last).
Allowed values are:
1 - 7."
::= { sPDUOutletConfigMSPgsEntry 8 }
sPDUOutletConfigMSPgsRestartDelay OBJECT-TYPE
SYNTAX INTEGER (-1..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in 6 minute intervals, between
when the outlet is turned off and the outlet is turned back on
when performing a Graceful Shutdown.
Allowed values are:
-1 - Never turn outlet back on after a Graceful shutdown.
0 - 9999 six minute intervals (0 - 999hrs, 54 mins)."
::= { sPDUOutletConfigMSPgsEntry 9 }
sPDUOutletConfigMSPgsPowerOnDelay OBJECT-TYPE
SYNTAX INTEGER (-1..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in seconds, between the UPS entering
normal (on-line) state and the outlet being powered on.
Allowed values are:
-1 - Remain Off when the UPS enters the on-line state.
0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
::= { sPDUOutletConfigMSPgsEntry 10 }
sPDUOutletConfigMSPgsPowerOffDelay OBJECT-TYPE
SYNTAX INTEGER (0..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in seconds, between when the server
shuts down and the outlet is powered off.
Allowed values are:
0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
::= { sPDUOutletConfigMSPgsEntry 11 }
sPDUOutletConfigMSPgsBattCapThresh OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The minimum battery capacity, as a percent (0-100%), required
of the UPS before an outlet will be allowed to power on.
Allowed values are:
0 - 100 percent."
::= { sPDUOutletConfigMSPgsEntry 12 }
sPDUOutletConfigMSPgsRebootDuration OBJECT-TYPE
SYNTAX INTEGER (0..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of delay, in seconds, from outlet off until
outlet on during a reboot.
Allowed values are:
0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
::= { sPDUOutletConfigMSPgsEntry 13 }
-- the sPDUOutConfigMSPannun group
sPDUOutletConfigMSPannunTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletConfigMSPannunEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the sPDUMasterStatusMSPOutletCount OID."
::= { sPDUOutletConfigMSPannun 1 }
sPDUOutletConfigMSPannunEntry OBJECT-TYPE
SYNTAX SPDUOutletConfigMSPannunEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to configure."
INDEX { sPDUOutletConfigMSPannunIndex, sPDUOutletConfigMSPannunOutletIndex }
::= { sPDUOutletConfigMSPannunTable 1 }
SPDUOutletConfigMSPannunEntry ::=
SEQUENCE {
sPDUOutletConfigMSPannunIndex INTEGER,
sPDUOutletConfigMSPannunName DisplayString,
sPDUOutletConfigMSPannunOutletIndex INTEGER,
sPDUOutletConfigMSPannunOutletName DisplayString,
sPDUOutletConfigMSPannunOutletCtrlMode INTEGER,
sPDUOutletConfigMSPannunInitialState INTEGER,
sPDUOutletConfigMSPannunAlarmActionDly INTEGER
}
sPDUOutletConfigMSPannunIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus."
::= { sPDUOutletConfigMSPannunEntry 1 }
sPDUOutletConfigMSPannunName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUOutletConfigMSPannunEntry 2 }
sPDUOutletConfigMSPannunOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletConfigMSPannunEntry 3 }
sPDUOutletConfigMSPannunOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only."
::= { sPDUOutletConfigMSPannunEntry 4 }
sPDUOutletConfigMSPannunOutletCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
modeGracefulShutdown (1),
modeAnnunciator (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Control Mode of the outlet.
This OID is provided for informational purposes only."
::= { sPDUOutletConfigMSPannunEntry 5 }
sPDUOutletConfigMSPannunInitialState OBJECT-TYPE
SYNTAX INTEGER {
initialStateOff (1),
initialStateOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to initialStateOff (1) causes the outlet
to default to off when in the non-alarmed condition.
Setting this OID to initialStateOn (2) causes the outlet
to default to on when in the non-alarmed condition."
::= { sPDUOutletConfigMSPannunEntry 6 }
sPDUOutletConfigMSPannunAlarmActionDly OBJECT-TYPE
SYNTAX INTEGER (0..9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The amount of time, in seconds, that an enabled Measure-UPS
alarm must be asserted before an alarm condition is recognized.
Allowed values are:
0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
::= { sPDUOutletConfigMSPannunEntry 7 }
-- the sPDUOutConfigMSPmups group
sPDUOutletConfigMSPmupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletConfigMSPmupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the sPDUMasterStatusMSPOutletCount OID."
::= { sPDUOutletConfigMSPmups 1 }
sPDUOutletConfigMSPmupsEntry OBJECT-TYPE
SYNTAX SPDUOutletConfigMSPmupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to configure."
INDEX { sPDUOutletConfigMSPmupsIndex, sPDUOutletConfigMSPmupsOutletIndex }
::= { sPDUOutletConfigMSPmupsTable 1 }
SPDUOutletConfigMSPmupsEntry ::=
SEQUENCE {
sPDUOutletConfigMSPmupsIndex INTEGER,
sPDUOutletConfigMSPmupsName DisplayString,
sPDUOutletConfigMSPmupsOutletIndex INTEGER,
sPDUOutletConfigMSPmupsOutletName DisplayString,
sPDUOutletConfigMSPmupsZone1 INTEGER,
sPDUOutletConfigMSPmupsZone2 INTEGER,
sPDUOutletConfigMSPmupsZone3 INTEGER,
sPDUOutletConfigMSPmupsZone4 INTEGER,
sPDUOutletConfigMSPmupsP1LowHum INTEGER,
sPDUOutletConfigMSPmupsP1HiHum INTEGER,
sPDUOutletConfigMSPmupsP1LowTemp INTEGER,
sPDUOutletConfigMSPmupsP1HiTemp INTEGER,
sPDUOutletConfigMSPmupsP2LowHum INTEGER,
sPDUOutletConfigMSPmupsP2HiHum INTEGER,
sPDUOutletConfigMSPmupsP2LowTemp INTEGER,
sPDUOutletConfigMSPmupsP2HiTemp INTEGER
}
sPDUOutletConfigMSPmupsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch plus."
::= { sPDUOutletConfigMSPmupsEntry 1 }
sPDUOutletConfigMSPmupsName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUOutletConfigMSPmupsEntry 2 }
sPDUOutletConfigMSPmupsOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletConfigMSPmupsEntry 3 }
sPDUOutletConfigMSPmupsOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only."
::= { sPDUOutletConfigMSPmupsEntry 4 }
sPDUOutletConfigMSPmupsZone1 OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Zone 1 alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Zone 1 alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 5 }
sPDUOutletConfigMSPmupsZone2 OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Zone 2 alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Zone 2 alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 6 }
sPDUOutletConfigMSPmupsZone3 OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Zone 3 alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Zone 3 alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 7 }
sPDUOutletConfigMSPmupsZone4 OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Zone 4 alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Zone 4 alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 8 }
sPDUOutletConfigMSPmupsP1LowHum OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 1 low humidity alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 1 low humidity alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 9 }
sPDUOutletConfigMSPmupsP1HiHum OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 1 high humidity alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 1 high humidity alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 10 }
sPDUOutletConfigMSPmupsP1LowTemp OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 1 low temperature alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 1 low temperature alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 11 }
sPDUOutletConfigMSPmupsP1HiTemp OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 1 high temperature alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 1 high temperature alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 12 }
sPDUOutletConfigMSPmupsP2LowHum OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 2 low humidity alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 2 low humidity alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 13 }
sPDUOutletConfigMSPmupsP2HiHum OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 2 high humidity alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 2 high humidity alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 14 }
sPDUOutletConfigMSPmupsP2LowTemp OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 2 low temperature alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 2 low temperature alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 15 }
sPDUOutletConfigMSPmupsP2HiTemp OBJECT-TYPE
SYNTAX INTEGER {
disableAlarm (1),
enableAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to disableAlarm (1) disables the
Probe 2 high temperature alarm for this outlet.
Setting this OID to enableAlarm (2) enables the
Probe 2 high temperature alarm for this outlet."
::= { sPDUOutletConfigMSPmupsEntry 16 }
-- the sPDUOutletStatusMSP group
sPDUOutletStatusMSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPDUOutletStatusMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of individual outlets. The number of
entries is contained in the sPDUMasterStatusOutletCount OID."
::= { sPDUOutletStatusMSP 1 }
sPDUOutletStatusMSPEntry OBJECT-TYPE
SYNTAX SPDUOutletStatusMSPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to gather status from."
INDEX { sPDUOutletStatusMSPIndex, sPDUOutletStatusMSPOutletIndex }
::= { sPDUOutletStatusMSPTable 1 }
SPDUOutletStatusMSPEntry ::=
SEQUENCE {
sPDUOutletStatusMSPIndex INTEGER,
sPDUOutletStatusMSPName DisplayString,
sPDUOutletStatusMSPOutletIndex INTEGER,
sPDUOutletStatusMSPOutletName DisplayString,
sPDUOutletStatusMSPOutletState INTEGER,
sPDUOutletStatusMSPCommandPending INTEGER,
sPDUOutletStatusMSPOutletCtrlMode INTEGER
}
sPDUOutletStatusMSPIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the MasterSwitch MSP."
::= { sPDUOutletStatusMSPEntry 1 }
sPDUOutletStatusMSPName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID."
::= { sPDUOutletStatusMSPEntry 2 }
sPDUOutletStatusMSPOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { sPDUOutletStatusMSPEntry 3 }
sPDUOutletStatusMSPOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only."
::= { sPDUOutletStatusMSPEntry 4 }
sPDUOutletStatusMSPOutletState OBJECT-TYPE
SYNTAX INTEGER {
outletStatusMSPOn (1),
outletStatusMSPOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the outletStatusMSPOn (1) value will be returned.
If the outlet is off, the outletStatusMSPOff (2) value will be
returned. "
::= { sPDUOutletStatusMSPEntry 5 }
sPDUOutletStatusMSPCommandPending OBJECT-TYPE
SYNTAX INTEGER {
outletStatusMSPCommandPending (1),
outletStatusMSPNoCommandPending (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the command pending
state of the outlet. If a command is pending on the
outlet, the outletStatusMSPCommandPending (1) value
will be returned. If there is not a command pending
on the outlet, the outletStatusMSPNoCommandPending (2)
will be returned."
::= { sPDUOutletStatusMSPEntry 6 }
sPDUOutletStatusMSPOutletCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
modeGracefulShutdown (1),
modeAnnunciator (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Control Mode of the outlet.
This OID is provided for informational purposes only."
::= { sPDUOutletStatusMSPEntry 7 }
-- the rPDUIdent group
rPDUIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the Rack PDU.
The maximum string size is device dependent."
::= { rPDUIdent 1 }
rPDUIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Rack PDU.
This value is set at the factory."
::= { rPDUIdent 2 }
rPDUIdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An 8-byte ID string identifying the Rack PDU firmware revision.
This value is set at the factory."
::= { rPDUIdent 3 }
rPDUIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the Rack PDU was manufactured in mm/dd/yyyy format.
This value is set at the factory. The year 2000 will be
represented by 00."
::= { rPDUIdent 4 }
rPDUIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10-character string identifying the model number of
the Rack PDU. This value is set at the factory."
::= { rPDUIdent 5 }
rPDUIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 12-character string identifying the serial number of
the Rack PDU. This value is set at the factory."
::= { rPDUIdent 6 }
rPDUIdentDeviceRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the electrical rating of the device in Amps."
::= { rPDUIdent 7 }
rPDUIdentDeviceNumOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the number of outlets contained in the device."
::= { rPDUIdent 8 }
rPDUIdentDeviceNumPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the number of phases supported by the device."
::= { rPDUIdent 9 }
rPDUIdentDeviceNumBreakers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the number of circuit breakers supported by the device.
This is the same as the number of banks of outlets.
0 will be returned if the unit has no phase breakers. "
::= { rPDUIdent 10 }
rPDUIdentDeviceBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return rating of the circuit breakers
on the device in Amps if it has any."
::= { rPDUIdent 11 }
rPDUIdentDeviceOrientation OBJECT-TYPE
SYNTAX INTEGER {
orientHorizontal (1),
orientVertical (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the intended physical orientation of the device.
OrientHorizonatal(1) indicates Horizontal.
OrientVertical(2) indicates Vertical."
::= { rPDUIdent 12 }
rPDUIdentDeviceOutletLayout OBJECT-TYPE
SYNTAX INTEGER {
seqPhaseToNeutral (1),
seqPhaseToPhase (2),
seqPhToNeu21PhToPh (3),
seqPhToPhGrouped (4),
seqPhToNGrouped (5),
seqPToN1516PToPGrouped (6),
seqPhToPh2xGrouped (7),
seqPhToN2xGrouped (8),
seqNotApplicable (9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return outlet layout for the device.
seqPhaseToNeutral(1) indicates outlet layout as follows:
1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,...
seqPhaseToPhase(2) indicates outlet layout as follows:
1:1-2,2:2-3,3:3-1,4:1-2,5:2-3,...
seqPhToNeu21PhToPh(3) indicates outlet layout as follows:
1:1-N,2:2-N...21:3-N,22:1-2,23:2-3,24:3-1,...
seqPhToPhGrouped(4) indicates outlet layout as follows:
For AP8xxx SKU's Group 1:1-2, Group 2:2-3, Group 3:3-1.
For AP7xxx SKU's Group 1:3-1. Group 2:2-3, Group 3:1-2.
seqPhToNGrouped(5) indicates outlet layout as follows:
This unit has 3 outlet groups. Group 1:1-N, Group 2:2-N, Group 3:3-N.
seqPToN1516PToPGrouped(6) indicates outlet layout as follows:
This unit has 4 outlet groups. Group 1 (Outlets 1-14):1-2,
Group 2 (Outlets 15-16):1-N, Group 3:2-3, Group 4:3-1.
seqPhToPh2xGrouped(7) indicates outlet layout as follows:
This unit has 6 outlet groups. Group 1:1-2, Group 2:1-2, Group 3:2-3,
Group 4:2-3, Group 5:3-1, Group 6:3-1.
seqPhToN2xGrouped(8) indicates outlet layout as follows:
This unit has 6 outlet groups. Group 1:1-N, Group 2:1-N, Group 3:2-N,
Group 4:2-N, Group 5:3-N, Group 6:3-N.
seqNotApplicable(9):
Outlet layout does not affect any of the user interfaces.
These SKUs may report seqNotApplicable(9) if there is
not an exact outlet layout match available."
::= { rPDUIdent 13 }
rPDUIdentDeviceDisplayOrientation OBJECT-TYPE
SYNTAX INTEGER {
displayNormal (1),
displayReverse (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this OID will return the intended physical orientation of the Seven-Segment Display.
Normal(1) indicates Normal.
Reverse(2)indicates Upside-Down."
::= { rPDUIdent 14 }
rPDUIdentDeviceLinetoLineVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting/Setting this OID will return/set the Line to Line Voltage.
This OID defaults to the nominal input line voltage in volts AC.
This setting is used to calculate total power and must be configured for best accuracy.
This OID does not apply to AP86XX, AP88XX, or AP89XX SKUs.
The valid range is between 0V to 440V"
::= { rPDUIdent 15 }
rPDUIdentDevicePowerWatts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the Power in Watts."
::= { rPDUIdent 16 }
rPDUIdentDevicePowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting/setting this OID will return/set the
Power Factor in thousandths (1000 is power factor of 1).
For AP8XXX SKUs, this OID is read-only
Valid range is from 0 to 1000."
::= { rPDUIdent 17 }
rPDUIdentDevicePowerVA OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the Power in VA."
::= { rPDUIdent 18 }
rPDUIdentDeviceLinetoNeutralVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting/Setting this OID will return/set the Line to Neutral Voltage.
This OID defaults to the nominal line to neutral voltage in volts AC.
This setting is used to calculate total power and must be configured for best accuracy.
This OID applies only to AP7823. For all other models, the OID is fixed at 0.
The valid range is between 0V to 440V."
::= { rPDUIdent 19 }
-- the rPDULoadDevice group
rPDULoadDevMaxPhaseLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the maximum rated power
that each phase of the Rack PDU can provide. It is
represented in Amps.
0 will be returned if the unit is banked."
::= { rPDULoadDevice 1 }
rPDULoadDevNumPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of phases available with this Rack PDU."
::= { rPDULoadDevice 2 }
rPDULoadDevMaxBankLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the maximum rated power
that a bank of the Rack PDU can provide. It is
represented in Amps.
0 will be returned if the device does not have any banks."
::= { rPDULoadDevice 3 }
rPDULoadDevNumBanks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of banks of outlets available with this Rack PDU.
A bank of outlets has a unique circuit breaker for a subset
of the total number of outlets on the rPDU.
0 will be returned if the unit has no banks."
::= { rPDULoadDevice 4 }
rPDULoadDevBankTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the Bank Table."
::= { rPDULoadDevice 5 }
rPDULoadDevBankTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDULoadDevBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting the Bank Max Load in the Rack PDU."
::= { rPDULoadDevice 6 }
rPDULoadDevBankEntry OBJECT-TYPE
SYNTAX RPDULoadDevBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Rack PDU Banks Access."
INDEX { rPDULoadDevBankIndex}
::= { rPDULoadDevBankTable 1 }
RPDULoadDevBankEntry ::=
SEQUENCE {
rPDULoadDevBankIndex INTEGER,
rPDULoadDevBankNumber INTEGER,
rPDULoadDevBankMaxLoad INTEGER
}
rPDULoadDevBankIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU bank entry."
::= { rPDULoadDevBankEntry 1 }
rPDULoadDevBankNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the bank number."
::= { rPDULoadDevBankEntry 2 }
rPDULoadDevBankMaxLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the maximum rated power
that each bank of the Rack PDU can provide. It is
represented in Amps."
::= { rPDULoadDevBankEntry 3 }
rPDULoadDevMaxOutletTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the Outlet Table."
::= { rPDULoadDevice 7 }
rPDULoadDevMaxOutletTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDULoadDevMaxOutletEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting the Max Outlet Load in an Outlet Monitored Rack PDU."
::= { rPDULoadDevice 8 }
rPDULoadDevMaxOutletEntry OBJECT-TYPE
SYNTAX RPDULoadDevMaxOutletEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to Max Outlet Load of an Outlet Monitored Rack PDU"
INDEX { rPDULoadDevOutletIndex}
::= { rPDULoadDevMaxOutletTable 1 }
RPDULoadDevMaxOutletEntry ::=
SEQUENCE {
rPDULoadDevOutletIndex INTEGER,
rPDULoadDevOutletNumber INTEGER,
rPDULoadDevMaxOutletLoad INTEGER
}
rPDULoadDevOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Outlet Monitored Rack PDU Max Outlet Load entry."
::= { rPDULoadDevMaxOutletEntry 1 }
rPDULoadDevOutletNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the Outlet number."
::= { rPDULoadDevMaxOutletEntry 2 }
rPDULoadDevMaxOutletLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the maximum rated power
that each Outlet of an Outlet Monitored Rack PDU can provide. It is
represented in Amps. "
::= { rPDULoadDevMaxOutletEntry 3 }
-- the rPDULoadPhaseConfig group
rPDULoadPhaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDULoadPhaseConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of each Rack PDU phase.
The number of entries is contained in the
rPDULoadDevNumPhases OID."
::= { rPDULoadPhaseConfig 1 }
rPDULoadPhaseConfigEntry OBJECT-TYPE
SYNTAX RPDULoadPhaseConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Rack PDU phase to configure."
INDEX { rPDULoadPhaseConfigIndex}
::= { rPDULoadPhaseConfigTable 1 }
RPDULoadPhaseConfigEntry ::=
SEQUENCE {
rPDULoadPhaseConfigIndex INTEGER,
rPDULoadPhaseConfigLowLoadThreshold INTEGER,
rPDULoadPhaseConfigNearOverloadThreshold INTEGER,
rPDULoadPhaseConfigOverloadThreshold INTEGER,
rPDULoadPhaseConfigAlarm INTEGER
}
rPDULoadPhaseConfigIndex OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU phase entry."
::= { rPDULoadPhaseConfigEntry 1 }
rPDULoadPhaseConfigLowLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is
represented in Amps. A warning will be issued when the
load is less than the threshold value.
A threshold value of 0 Amps effectively disables this
warning.
Maximum value must be less than the value returned
by the rPDULoadPhaseConfigNearOverloadThreshold OID."
::= { rPDULoadPhaseConfigEntry 2 }
rPDULoadPhaseConfigNearOverloadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing an overload condition. It is
represented in Amps. A warning will be issued when the
load is greater than or equal to the threshold value.
Minimum value must be greater than the value returned by
the rPDULoadPhaseConfigLowLoadThreshold OID.
Maximum value must be less than or equal to the value
returned by the rPDULoadPhaseConfigOverloadThreshold OID."
::= { rPDULoadPhaseConfigEntry 3 }
rPDULoadPhaseConfigOverloadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load has entered an overload condition. It is
represented in Amps. A warning will be issued when the
load is greater than or equal to the threshold value.
Minimum value must be greater than or equal to the value
returned by the rPDULoadPhaseConfigNearOverloadThreshold OID.
Maximum value must be less than or equal to the value
returned by the rPDULoadDevMaxPhaseLoad OID."
::= { rPDULoadPhaseConfigEntry 4 }
rPDULoadPhaseConfigAlarm OBJECT-TYPE
SYNTAX INTEGER {
noLoadAlarm (1),
underCurrentAlarm (2),
nearOverCurrentAlarm (3),
overCurrentAlarm (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the current Phase Alarm."
::= { rPDULoadPhaseConfigEntry 5 }
-- the rPDULoadStatus group
rPDULoadStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDULoadStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of each Rack PDU phase/bank.
The number of entries is calculated by adding
the number of phases (rPDULoadDevNumPhases OID) and
the number of banks of outlets (rPDULoadDevNumBanks)
Number of entries = #phases + #banks.
NOTE: If a device has phase and bank information, all phase information
shall precede the bank information. If a device has total information,
it shall precede both the bank and the phase information."
::= { rPDULoadStatus 1 }
rPDULoadStatusEntry OBJECT-TYPE
SYNTAX RPDULoadStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Rack PDU phase/bank to gather status from."
INDEX { rPDULoadStatusIndex}
::= { rPDULoadStatusTable 1 }
RPDULoadStatusEntry ::=
SEQUENCE {
rPDULoadStatusIndex INTEGER,
rPDULoadStatusLoad Gauge,
rPDULoadStatusLoadState INTEGER,
rPDULoadStatusPhaseNumber INTEGER,
rPDULoadStatusBankNumber INTEGER
}
rPDULoadStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU phase/bank entry. All phase information will precede
any bank information"
::= { rPDULoadStatusEntry 1 }
rPDULoadStatusLoad OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the phase/bank load measured
in tenths of Amps."
::= { rPDULoadStatusEntry 2 }
rPDULoadStatusLoadState OBJECT-TYPE
SYNTAX INTEGER {
phaseLoadNormal (1),
phaseLoadLow (2),
phaseLoadNearOverload (3),
phaseLoadOverload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the phase/bank load state.
phaseLoadNormal(1) indicates that the phase/bank is
operating properly within the rPDULoadConfigLowLoadThreshold
and rPDULoadConfigNearOverloadThreshold OID values.
phaseLoadLow(2) indicates that the phase/bank load has
dropped below the rPDULoadConfigLowLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
phaseLoadNearOverload(3) indicates that the phase/bank load
is greater than or equal to the
rPDULoadConfigNearOverloadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
phaseLoadOverload(4) indicates that the phase/bank load is
greater than or equal to the rPDULoadConfigOverloadThreshold
OID value.
An SNMP trap will occur when this state is entered or cleared."
::= { rPDULoadStatusEntry 3 }
rPDULoadStatusPhaseNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase number to which this record refers."
::= { rPDULoadStatusEntry 4 }
rPDULoadStatusBankNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bank number to which this record refers. A value of 0 will be returned if
any bank is not present or if it is phase related."
::= { rPDULoadStatusEntry 5 }
-- the rPDULoadBankConfig group
rPDULoadBankConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDULoadBankConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of each Rack PDU bank.
The number of entries is contained in the
rPDULoadDevNumBanks OID."
::= { rPDULoadBankConfig 1 }
rPDULoadBankConfigEntry OBJECT-TYPE
SYNTAX RPDULoadBankConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Rack PDU bank to configure."
INDEX { rPDULoadBankConfigIndex}
::= { rPDULoadBankConfigTable 1 }
RPDULoadBankConfigEntry ::=
SEQUENCE {
rPDULoadBankConfigIndex INTEGER,
rPDULoadBankConfigLowLoadThreshold INTEGER,
rPDULoadBankConfigNearOverloadThreshold INTEGER,
rPDULoadBankConfigOverloadThreshold INTEGER,
rPDULoadBankConfigAlarm INTEGER
}
rPDULoadBankConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU bank entry."
::= { rPDULoadBankConfigEntry 1 }
rPDULoadBankConfigLowLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is
represented in Amps. A warning will be issued when the
load is less than the threshold value.
A threshold value of 0 Amps effectively disables this
warning.
Maximum value must be less than the value returned
by the rPDULoadBankConfigNearOverloadThreshold OID."
::= { rPDULoadBankConfigEntry 2 }
rPDULoadBankConfigNearOverloadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing an overload condition. It is
represented in Amps. A warning will be issued when the
load is greater than or equal to the threshold value.
Minimum value must be greater than the value returned by
the rPDULoadBankConfigLowLoadThreshold OID.
Maximum value must be less than or equal to the value
returned by the rPDULoadBankConfigOverloadThreshold OID."
::= { rPDULoadBankConfigEntry 3 }
rPDULoadBankConfigOverloadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load has entered an overload condition. It is
represented in Amps. A warning will be issued when the
load is greater than or equal to the threshold value.
Minimum value must be greater than or equal to the value
returned by the rPDULoadBankConfigNearOverloadThreshold OID.
Maximum value must be less than or equal to the value
returned by the rPDULoadDevMaxBankLoad OID."
::= { rPDULoadBankConfigEntry 4 }
rPDULoadBankConfigAlarm OBJECT-TYPE
SYNTAX INTEGER {
noLoadAlarm (1),
underCurrentAlarm (2),
nearOverCurrentAlarm (3),
overCurrentAlarm (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Getting this OID will return the current Bank Alarm."
::= { rPDULoadBankConfigEntry 5 }
-- the rPDUOutletDevice group
rPDUOutletDevCommand OBJECT-TYPE
SYNTAX INTEGER {
noCommandAll (1),
immediateAllOn (2),
immediateAllOff (3),
immediateAllReboot (4),
delayedAllOn (5),
delayedAllOff (6),
delayedAllReboot (7),
cancelAllPendingCommands (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to immediateAllOn (2) will turn all outlets
on immediately.
Setting this OID to immediateAllOff (3) will turn all outlets
off immediately.
Setting this OID to immediateAllReboot (4) will reboot all outlets
immediately.
Setting this OID to delayedAllOn (5) will turn all outlets on as
defined by each outlet's rPDUOutletConfigPowerOnTime OID value.
Setting this OID to delayedAllOff (6) will turn all outlets
off as defined by each outlet's rPDUOutletConfigPowerOffTime OID value.
Setting this OID to delayedAllReboot (7) will cause a
delayedAllOff command to be performed. Once all outlets are off,
the Switched Rack PDU will then delay the largest
rPDUOutletConfigRebootDuration OID time, and then perform a
delayedAllOn command.
Setting this OID to cancelAllPendingCommands (8) will cause all pending
commands on the Switched Rack PDU to be canceled.
Getting this OID will return the noCommandAll (1) value."
::= { rPDUOutletDevice 1 }
rPDUOutletDevColdstartDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of delay, in seconds, between when
power is provided to the Switched Rack PDU and
when the Switched Rack PDU provides basic master
power to the outlets.
Allowed values are:
-1 - never apply power automatically.
0 - apply power immediately.
1 to 300 - delay up to 300 seconds (5 minutes)."
::= { rPDUOutletDevice 2 }
rPDUOutletDevNumCntrlOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of controlled outlets on this Switched Rack PDU."
::= { rPDUOutletDevice 3 }
rPDUOutletDevNumTotalOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of outlets on this Rack PDU."
::= { rPDUOutletDevice 4 }
rPDUOutletDevMonitoredOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of monitored outlets on this Rack PDU."
::= { rPDUOutletDevice 5 }
-- the rPDUOutletPhase group
rPDUOutletPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUOutletPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for management of outlets on a per phase basis."
::= { rPDUOutletPhase 1 }
rPDUOutletPhaseEntry OBJECT-TYPE
SYNTAX RPDUOutletPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The phase to manage."
INDEX { rPDUOutletPhaseIndex}
::= { rPDUOutletPhaseTable 1 }
RPDUOutletPhaseEntry ::=
SEQUENCE {
rPDUOutletPhaseIndex INTEGER,
rPDUOutletPhaseOverloadRestriction INTEGER
}
rPDUOutletPhaseIndex OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Switched Rack PDU phase entry."
::= { rPDUOutletPhaseEntry 1 }
rPDUOutletPhaseOverloadRestriction OBJECT-TYPE
SYNTAX INTEGER {
alwaysAllowTurnON (1),
restrictOnNearOverload (2),
restrictOnOverload (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID controls the behavior of a Switched Rack PDU
phase when an overload condition is possible and
additional outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow
the outlets on the corresponding phase to turn on.
Setting this OID to restrictOnNearOverload (2) will not allow
outlets on the corresponding phase to turn on if the
rPDULoadConfigNearOverloadThreshold OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow
outlets on the corresponding phase to turn on if the
rPDULoadConfigOverloadThreshold OID is exceeded."
::= { rPDUOutletPhaseEntry 2 }
-- the rPDUOutletControl group
rPDUOutletControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of the individual outlets.
The number of entries is contained in the
rPDUOutletDevNumCntrlOutlets OID."
::= { rPDUOutletControl 1 }
rPDUOutletControlEntry OBJECT-TYPE
SYNTAX RPDUOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlet to control."
INDEX { rPDUOutletControlIndex}
::= { rPDUOutletControlTable 1 }
RPDUOutletControlEntry ::=
SEQUENCE {
rPDUOutletControlIndex INTEGER,
rPDUOutletControlOutletName DisplayString,
rPDUOutletControlOutletPhase INTEGER,
rPDUOutletControlOutletCommand INTEGER,
rPDUOutletControlOutletBank INTEGER
}
rPDUOutletControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { rPDUOutletControlEntry 1 }
rPDUOutletControlOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum string size is device dependent.
An error will be returned if the set request exceeds the max size.
This OID is provided for informational purposes only."
::= { rPDUOutletControlEntry 2 }
rPDUOutletControlOutletPhase OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3),
phase1-2 (4),
phase2-3 (5),
phase3-1 (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase/s associated with this outlet.
For single phase devices, this object will always
return phase1(1).
For 3-phase devices, this object will return phase1 (1),
phase2 (2), or phase3 (3) for outlets tied to a single
phase. For outlets tied to two phases, this object will
return phase1-2 (4) for phases 1 and 2, phase2-3 (5) for
phases 2 and 3, and phase3-1 (6) for phases 3 and 1."
::= { rPDUOutletControlEntry 3 }
rPDUOutletControlOutletCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateOn (1),
immediateOff (2),
immediateReboot (3),
delayedOn (4),
delayedOff (5),
delayedReboot (6),
cancelPendingCommand (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the immediateOn (1) value will be returned.
If the outlet is off, the immediateOff (2) value will be
returned.
Setting this variable to immediateOn (1) will immediately turn
the outlet on.
Setting this variable to immediateOff (2) will immediately turn
the outlet off.
Setting this variable to immediateReboot (3) will immediately
reboot the outlet.
Setting this variable to delayedOn (4) will turn the outlet on
after the rPDUOutletConfigPowerOnTime OID time has elapsed.
Setting this variable to delayedOff (5) will turn the outlet off
after the rPDUOutletConfigPowerOffTime OID time has elapsed.
Setting this variable to delayedReboot (6) will cause the
Switched Rack PDU to perform a delayedOff command, wait the
rPDUOutletConfigRebootDuration OID time, and then perform a
delayedOn command.
Setting this variable to cancelPendingCommand (7) will cause any
pending command to this outlet to be canceled."
::= { rPDUOutletControlEntry 4 }
rPDUOutletControlOutletBank OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bank associated with this outlet."
::= { rPDUOutletControlEntry 5 }
-- the rPDUOutletConfig group
rPDUOutletConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the rPDUOutletDevNumCntrlOutlets OID."
::= { rPDUOutletConfig 1 }
rPDUOutletConfigEntry OBJECT-TYPE
SYNTAX RPDUOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlet to configure."
INDEX { rPDUOutletConfigIndex}
::= { rPDUOutletConfigTable 1 }
RPDUOutletConfigEntry ::=
SEQUENCE {
rPDUOutletConfigIndex INTEGER,
rPDUOutletConfigOutletName DisplayString,
rPDUOutletConfigOutletPhase INTEGER,
rPDUOutletConfigPowerOnTime INTEGER,
rPDUOutletConfigPowerOffTime INTEGER,
rPDUOutletConfigRebootDuration INTEGER,
rPDUOutletConfigOutletBank INTEGER
}
rPDUOutletConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { rPDUOutletConfigEntry 1 }
rPDUOutletConfigOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum string size is device dependent.
An error will be returned if the set request exceeds the max size."
::= { rPDUOutletConfigEntry 2 }
rPDUOutletConfigOutletPhase OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3),
phase1-2 (4),
phase2-3 (5),
phase3-1 (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase/s associated with this outlet.
For single phase devices, this object will always
return phase1(1).
For 3-phase devices, this object will return phase1 (1),
phase2 (2), or phase3 (3) for outlets tied to a single
phase. For outlets tied to two phases, this object will
return phase1-2 (4) for phases 1 and 2, phase2-3 (5) for
phases 2 and 3, and phase3-1 (6) for phases 3 and 1."
::= { rPDUOutletConfigEntry 3 }
rPDUOutletConfigPowerOnTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (in seconds) the outlet will delay
powering on at coldstart or when a command that requires
a turn-on delay is issued.
Allowed values are:
-1 - never power on.
0 - power on immediately.
1 to 7200 - power on up to 7200 seconds after being
commanded."
::= { rPDUOutletConfigEntry 4 }
rPDUOutletConfigPowerOffTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time (in seconds) the outlet will delay
powering off when a command that requires
a turn-off delay is issued.
Allowed values are:
-1 - never power off.
0 - power off immediately.
1 to 7200 - power off up to 7200 seconds after being
commanded."
::= { rPDUOutletConfigEntry 5 }
rPDUOutletConfigRebootDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait,
in seconds, after turning the power off, at the start
of the sequence, before turning power back on, at the
end of the reboot sequence.
Allowed range is any value between 5 and 60 seconds (1 minute)."
::= { rPDUOutletConfigEntry 6 }
rPDUOutletConfigOutletBank OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bank associated with this outlet."
::= { rPDUOutletConfigEntry 7 }
-- Monitored Outlets table
rPDUOutletConfigMonitoredTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the Outlet Config Monitored Table"
::= { rPDUOutletConfig 2 }
rPDUOutletConfigMonitoredTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUOutletConfigMonitoredEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting/setting of outlet thresholds of an Outlet Monitored Rack PDU."
::= { rPDUOutletConfig 3 }
rPDUOutletConfigMonitoredEntry OBJECT-TYPE
SYNTAX RPDUOutletConfigMonitoredEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to Monitored Outlet entries"
INDEX { rPDUOutletConfigMonitoredIndex }
::= { rPDUOutletConfigMonitoredTable 1 }
RPDUOutletConfigMonitoredEntry ::=
SEQUENCE {
rPDUOutletConfigMonitoredIndex INTEGER,
rPDUOutletConfigMonitoredName DisplayString,
rPDUOutletConfigMonitoredNumber INTEGER,
rPDUOutletConfigMonitoredLowLoadThreshold INTEGER,
rPDUOutletConfigMonitoredNearOverloadThreshold INTEGER,
rPDUOutletConfigMonitoredOverloadThreshold INTEGER
}
rPDUOutletConfigMonitoredIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the RACK PDU Phase entry."
::= { rPDUOutletConfigMonitoredEntry 1 }
rPDUOutletConfigMonitoredName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the Monitored Outlet. The maximum string size is device dependent.
An error will be returned if the set request exceeds the max size."
::= { rPDUOutletConfigMonitoredEntry 2 }
rPDUOutletConfigMonitoredNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outlet number of an Outlet Monitored RACK PDU."
::= { rPDUOutletConfigMonitoredEntry 3 }
rPDUOutletConfigMonitoredLowLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is
represented in Amps. A warning will be issued when the
load is less than the threshold value.
A threshold value of 0 Amps effectively disables this
warning.
Maximum value must be less than the value returned
by the rPDUOutletConfigMonitoredNearOverloadThreshold OID.
0 will be returned if the unit is not Outlet Monitored Rack PDU."
::= { rPDUOutletConfigMonitoredEntry 4 }
rPDUOutletConfigMonitoredNearOverloadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load is nearing an overload condition. It is
represented in Amps. A warning will be issued when the
load is greater than or equal to the threshold value.
Minimum value must be greater than the value returned by
the rPDUOutletConfigMonitoredLowLoadThreshold OID.
Maximum value must be less than or equal to the value
returned by the rPDUOutletConfigMonitoredOverloadThreshold OID.
0 will be returned if the unit is not Outlet Monitored Rack PDU."
::= { rPDUOutletConfigMonitoredEntry 5 }
rPDUOutletConfigMonitoredOverloadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the power consumption of
the load has entered an overload condition. It is
represented in Amps. A warning will be issued when the
load is greater than or equal to the threshold value.
Minimum value must be greater than or equal to the value
returned by the rPDUOutletConfigMonitoredNearOverloadThreshold OID.
Maximum value must be less than or equal to the value
returned by the rPDULoadDevMaxOutletLoad OID.
0 will be returned if the unit is not Outlet Monitored Rack PDU."
::= { rPDUOutletConfigMonitoredEntry 6 }
-- the rPDUOutletStatus group
rPDUOutletStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of individual outlets. The number of
entries is contained in the rPDUOutletDevNumCntrlOutlets OID or
rPDUOutletDevMonitoredOutlets OID."
::= { rPDUOutletStatus 1 }
rPDUOutletStatusEntry OBJECT-TYPE
SYNTAX RPDUOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlet to gather status from."
INDEX { rPDUOutletStatusIndex}
::= { rPDUOutletStatusTable 1 }
RPDUOutletStatusEntry ::=
SEQUENCE {
rPDUOutletStatusIndex INTEGER,
rPDUOutletStatusOutletName DisplayString,
rPDUOutletStatusOutletPhase INTEGER,
rPDUOutletStatusOutletState INTEGER,
rPDUOutletStatusCommandPending INTEGER,
rPDUOutletStatusOutletBank INTEGER,
rPDUOutletStatusLoad Gauge
}
rPDUOutletStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { rPDUOutletStatusEntry 1 }
rPDUOutletStatusOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet. The maximum string size is device dependent.
This OID is provided for informational purposes only."
::= { rPDUOutletStatusEntry 2 }
rPDUOutletStatusOutletPhase OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3),
phase1-2 (4),
phase2-3 (5),
phase3-1 (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase/s associated with this outlet.
For single phase devices, this object will always
return phase1(1).
For 3-phase devices, this object will return phase1 (1),
phase2 (2), or phase3 (3) for outlets tied to a single
phase. For outlets tied to two phases, this object will
return phase1-2 (4) for phases 1 and 2, phase2-3 (5) for
phases 2 and 3, and phase3-1 (6) for phases 3 and 1."
::= { rPDUOutletStatusEntry 3 }
rPDUOutletStatusOutletState OBJECT-TYPE
SYNTAX INTEGER {
outletStatusOn (1),
outletStatusOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the outletStatusOn (1) value will be returned.
If the outlet is off, the outletStatusOff (2) value will be
returned."
::= { rPDUOutletStatusEntry 4 }
rPDUOutletStatusCommandPending OBJECT-TYPE
SYNTAX INTEGER {
outletStatusCommandPending (1),
outletStatusNoCommandPending (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the command pending
state of the outlet. If a command is pending on the
outlet, the outletStatusCommandPending (1) value
will be returned. If there is not a command pending
on the outlet, the outletStatusNoCommandPending (2)
will be returned."
::= { rPDUOutletStatusEntry 5 }
rPDUOutletStatusOutletBank OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bank associated with this outlet."
::= { rPDUOutletStatusEntry 6 }
rPDUOutletStatusLoad OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the measured Outlet load for
an Outlet Monitored Rack PDU in tenths of Amps. For other
models this OID is not supported."
::= { rPDUOutletStatusEntry 7 }
-- the rPDUOutletBank group
rPDUOutletBankTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUOutletBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for management of outlets on a per bank basis."
::= { rPDUOutletBank 1 }
rPDUOutletBankEntry OBJECT-TYPE
SYNTAX RPDUOutletBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The bank to manage."
INDEX { rPDUOutletBankIndex}
::= { rPDUOutletBankTable 1 }
RPDUOutletBankEntry ::=
SEQUENCE {
rPDUOutletBankIndex INTEGER,
rPDUOutletBankOverloadRestriction INTEGER
}
rPDUOutletBankIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Switched Rack PDU bank entry."
::= { rPDUOutletBankEntry 1 }
rPDUOutletBankOverloadRestriction OBJECT-TYPE
SYNTAX INTEGER {
alwaysAllowTurnON (1),
restrictOnNearOverload (2),
restrictOnOverload (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID controls the behavior of a Switched Rack PDU
bank when an overload condition is possible and
additional outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow
the outlets on the corresponding bank to turn on.
Setting this OID to restrictOnNearOverload (2) will not allow
outlets on the corresponding bank to turn on if the
rPDULoadBankConfigNearOverloadThreshold OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow
outlets on the corresponding bank to turn on if the
rPDULoadBankConfigOverloadThreshold OID is exceeded."
::= { rPDUOutletBankEntry 2 }
-- the rPDUPowerSupplyDevice group
rPDUPowerSupply1Status OBJECT-TYPE
SYNTAX INTEGER {
powerSupplyOneOk (1),
powerSupplyOneFailed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return powerSupply1Ok(1) if power
supply 1 is functioning normally. If not functioning normally,
this OID will return powerSupply1Failed(2)."
::= { rPDUPowerSupplyDevice 1 }
rPDUPowerSupply2Status OBJECT-TYPE
SYNTAX INTEGER {
powerSupplyTwoOk (1),
powerSupplyTwoFailed (2),
powerSupplyTwoNotPresent (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return powerSupply2Ok(1) if power
supply 2 is functioning normally. If not functioning normally,
this OID will return powerSupply2Failed(2).
Metered Rack PDUs do not have a redundant powersupply."
::= { rPDUPowerSupplyDevice 2 }
rPDUPowerSupplyAlarm OBJECT-TYPE
SYNTAX INTEGER {
allAvailablePowerSuppliesOK (1),
powerSupplyOneFailed (2),
powerSupplyTwoFailed (3),
powerSupplyOneandTwoFailed (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return powerSupply Alarm"
::= { rPDUPowerSupplyDevice 3 }
-- the rPDUStatus group
rPDUStatusBankTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the Status Bank Table"
::= { rPDUStatus 1 }
rPDUStatusBankTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUStatusBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of each Rack PDU Bank"
::= { rPDUStatus 2 }
rPDUStatusBankEntry OBJECT-TYPE
SYNTAX RPDUStatusBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to Bank entries"
INDEX { rPDUStatusBankIndex }
::= { rPDUStatusBankTable 1 }
RPDUStatusBankEntry ::=
SEQUENCE {
rPDUStatusBankIndex INTEGER,
rPDUStatusBankNumber INTEGER,
rPDUStatusBankState INTEGER
}
rPDUStatusBankIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the RACK PDU Bank entry."
::= { rPDUStatusBankEntry 1 }
rPDUStatusBankNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the bank number."
::= { rPDUStatusBankEntry 2 }
rPDUStatusBankState OBJECT-TYPE
SYNTAX INTEGER {
bankLoadNormal (1),
bankLoadLow (2),
bankLoadNearOverload (3),
bankLoadOverload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the bank load state.
bankLoadNormal(1) indicates that the bank is
operating properly within the rPDULoadBankConfigLowLoadThreshold
and rPDULoadBankConfigNearOverloadThreshold OID values.
bankLoadLow(2) indicates that the bank load has
dropped below the rPDULoadBankConfigLowLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
bankLoadNearOverload(3) indicates that the bank load
is greater than or equal to the
rPDULoadBankConfigNearOverloadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
bankLoadOverload(4) indicates that the bank load is
greater than or equal to the rPDULoadBankConfigOverloadThreshold
OID value.
An SNMP trap will occur when this state is entered or cleared."
::= { rPDUStatusBankEntry 3 }
-- Phase status table
rPDUStatusPhaseTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the Status Phase Table"
::= { rPDUStatus 3 }
rPDUStatusPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUStatusPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of each Rack PDU Phase"
::= { rPDUStatus 4 }
rPDUStatusPhaseEntry OBJECT-TYPE
SYNTAX RPDUStatusPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to Phase entries"
INDEX { rPDUStatusPhaseIndex }
::= { rPDUStatusPhaseTable 1 }
RPDUStatusPhaseEntry ::=
SEQUENCE {
rPDUStatusPhaseIndex INTEGER,
rPDUStatusPhaseNumber INTEGER,
rPDUStatusPhaseState INTEGER
}
rPDUStatusPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the RACK PDU Phase entry."
::= { rPDUStatusPhaseEntry 1 }
rPDUStatusPhaseNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the phase number."
::= { rPDUStatusPhaseEntry 2 }
rPDUStatusPhaseState OBJECT-TYPE
SYNTAX INTEGER {
phaseLoadNormal (1),
phaseLoadLow (2),
phaseLoadNearOverload (3),
phaseLoadOverload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the Phase load state.
phaseLoadNormal(1) indicates that the Phase is
operating properly within the rPDULoadPhaseConfigLowLoadThreshold
and rPDULoadPhaseConfigNearOverloadThreshold OID values.
phaseLoadLow(2) indicates that the Phase load has
dropped below the rPDULoadPhaseConfigLowLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
phaseLoadNearOverload(3) indicates that the Phase load
is greater than or equal to the
rPDULoadPhaseConfigNearOverloadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
phaseLoadOverload(4) indicates that the Phase load is
greater than or equal to the rPDULoadPhaseConfigOverloadThreshold
OID value.
An SNMP trap will occur when this state is entered or cleared."
::= { rPDUStatusPhaseEntry 3 }
-- Outlet status table
rPDUStatusOutletTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the Status Outlet Table"
::= { rPDUStatus 5 }
rPDUStatusOutletTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDUStatusOutletEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting of status of each Outlet of an Outlet Monitored Rack PDU."
::= { rPDUStatus 6 }
rPDUStatusOutletEntry OBJECT-TYPE
SYNTAX RPDUStatusOutletEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to Outlet entries"
INDEX { rPDUStatusOutletIndex }
::= { rPDUStatusOutletTable 1 }
RPDUStatusOutletEntry ::=
SEQUENCE {
rPDUStatusOutletIndex INTEGER,
rPDUStatusOutletNumber INTEGER,
rPDUStatusOutletState INTEGER
}
rPDUStatusOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the RACK PDU Outlet entry."
::= { rPDUStatusOutletEntry 1 }
rPDUStatusOutletNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the Outlet number."
::= { rPDUStatusOutletEntry 2 }
rPDUStatusOutletState OBJECT-TYPE
SYNTAX INTEGER {
outletLoadNormal (1),
outletLoadLow (2),
outletLoadNearOverload (3),
outletLoadOverload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the Outlet load state.
outletLoadNormal(1) indicates that the Outlet is
operating properly within the rPDUOutletConfigMonitoredLowLoadThreshold
and rPDUOutletConfigMonitoredNearOverloadThreshold OID values.
outletLoadLow(2) indicates that the Outlet load has
dropped below the rPDUOutletConfigMonitoredLowLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
outletLoadNearOverload(3) indicates that the Outlet load
is greater than or equal to the
rPDUOutletConfigMonitoredNearOverloadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
outletLoadOverload(4) indicates that the Outlet load is
greater than or equal to the rPDUOutletConfigMonitoredOverloadThreshold
OID value.
An SNMP trap will occur when this state is entered or cleared."
::= { rPDUStatusOutletEntry 3 }
-- Common rPDU2 values
Rpdu2OutletPhaseLayoutType ::= INTEGER {
seqPhase1ToNeutral (1),
seqPhase2ToNeutral (2),
seqPhase3ToNeutral (3),
seqPhase1ToPhase2 (4),
seqPhase2ToPhase3 (5),
seqPhase3ToPhase1 (6)
}
-- rPDU2 Ident Table
rPDU2IdentTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Rack PDUs"
::= { rPDU2 1 }
rPDU2IdentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2IdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU identification data"
::= { rPDU2 2 }
rPDU2IdentEntry OBJECT-TYPE
SYNTAX RPDU2IdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Identification data from Rack PDU being queried"
INDEX { rPDU2IdentIndex }
::= { rPDU2IdentTable 1 }
RPDU2IdentEntry ::=
SEQUENCE {
rPDU2IdentIndex INTEGER,
rPDU2IdentModule INTEGER,
rPDU2IdentName DisplayString,
rPDU2IdentLocation DisplayString,
rPDU2IdentHardwareRev DisplayString,
rPDU2IdentFirmwareRev DisplayString,
rPDU2IdentDateOfManufacture DisplayString,
rPDU2IdentModelNumber DisplayString,
rPDU2IdentSerialNumber DisplayString,
rPDU2IdentContact DisplayString,
rPDU2IdentBootMonitorRev DisplayString,
rPDU2IdentLongDescription DisplayString,
rPDU2IdentNMCSerialNumber DisplayString,
rPDU2IndentAppBuildDate DisplayString,
rPDU2IndentAOSBuildDate DisplayString,
rPDU2IndentBootMonBuildDate DisplayString
}
rPDU2IdentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU identification table
entry"
::= { rPDU2IdentEntry 1 }
rPDU2IdentModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2IdentEntry 2 }
rPDU2IdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the Rack PDU"
::= { rPDU2IdentEntry 3 }
rPDU2IdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the location
of the Rack PDU"
::= { rPDU2IdentEntry 4 }
rPDU2IdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU hardware version"
::= { rPDU2IdentEntry 5 }
rPDU2IdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU firmware version"
::= { rPDU2IdentEntry 6 }
rPDU2IdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date the Rack PDU was manufactured
in mm/dd/yyyy format"
::= { rPDU2IdentEntry 7 }
rPDU2IdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU model number"
::= { rPDU2IdentEntry 8 }
rPDU2IdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU serial number"
::= { rPDU2IdentEntry 9 }
rPDU2IdentContact OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the
person to contact regarding the Rack PDU"
::= { rPDU2IdentEntry 10 }
rPDU2IdentBootMonitorRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU Boot Monitor version"
::= { rPDU2IdentEntry 11 }
rPDU2IdentLongDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU Long Description name"
::= { rPDU2IdentEntry 12 }
rPDU2IdentNMCSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU Network Management Card (NMC) serial number"
::= { rPDU2IdentEntry 13 }
rPDU2IndentAppBuildDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU Application build date"
::= { rPDU2IdentEntry 14 }
rPDU2IndentAOSBuildDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU AOS build date"
::= { rPDU2IdentEntry 15 }
rPDU2IndentBootMonBuildDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rack PDU Boot Monitor build date"
::= { rPDU2IdentEntry 16 }
-- rPDU2 Device Data
rPDU2DeviceTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Rack PDUs"
::= { rPDU2 3 }
rPDU2Device OBJECT IDENTIFIER ::= { rPDU2 4 }
-- rPDU2 Device Config
rPDU2DeviceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2DeviceConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU configuration data"
::= { rPDU2Device 1 }
rPDU2DeviceConfigEntry OBJECT-TYPE
SYNTAX RPDU2DeviceConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from Rack PDU being queried"
INDEX { rPDU2DeviceConfigIndex }
::= { rPDU2DeviceConfigTable 1 }
RPDU2DeviceConfigEntry ::=
SEQUENCE {
rPDU2DeviceConfigIndex INTEGER,
rPDU2DeviceConfigModule INTEGER,
rPDU2DeviceConfigName DisplayString,
rPDU2DeviceConfigLocation DisplayString,
rPDU2DeviceConfigDisplayOrientation INTEGER,
rPDU2DeviceConfigColdstartDelay INTEGER,
rPDU2DeviceConfigLowLoadPowerThreshold INTEGER,
rPDU2DeviceConfigNearOverloadPowerThreshold INTEGER,
rPDU2DeviceConfigOverloadPowerThreshold INTEGER,
rPDU2DeviceConfigDevicePeakPowerReset INTEGER,
rPDU2DeviceConfigDeviceEnergyReset INTEGER,
rPDU2DeviceConfigOutletsEnergyReset INTEGER,
rPDU2DeviceConfigOutletsPeakLoadReset INTEGER,
rPDU2DeviceConfigContact DisplayString
}
rPDU2DeviceConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU table entry"
::= { rPDU2DeviceConfigEntry 1 }
rPDU2DeviceConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2DeviceConfigEntry 2 }
rPDU2DeviceConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the Rack PDU"
::= { rPDU2DeviceConfigEntry 3 }
rPDU2DeviceConfigLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the location
of the Rack PDU"
::= { rPDU2DeviceConfigEntry 4 }
rPDU2DeviceConfigDisplayOrientation OBJECT-TYPE
SYNTAX INTEGER {
displayNormal (1),
displayReverse (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the intended physical orientation
of the display.
displayNormal(1) indicates normal orientation
displayReverse(2) indicates upside down orientation"
::= { rPDU2DeviceConfigEntry 5 }
rPDU2DeviceConfigColdstartDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of delay, measured in seconds, between
when power is provided to the Rack PDU and when
the Rack PDU provides basic master power to the
outlets.
Allowed values are:
-1 - never apply power automatically.
0 - apply power immediately.
1 to 300 - delay up to 300 seconds (5 minutes)."
::= { rPDU2DeviceConfigEntry 6 }
rPDU2DeviceConfigLowLoadPowerThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined low power draw alarm threshold,
measured in tenths of kilowatts. Models that do
not support this feature will respond to this OID
with a value of -1."
::= { rPDU2DeviceConfigEntry 7 }
rPDU2DeviceConfigNearOverloadPowerThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined near power overload threshold,
measured in tenths of kilowatts. Models that do
not support this feature will respond to this OID
with a value of -1."
::= { rPDU2DeviceConfigEntry 8 }
rPDU2DeviceConfigOverloadPowerThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined power overload threshold,
measured in tenths of kilowatts. Models that do
not support this feature will respond to this OID
with a value of -1."
::= { rPDU2DeviceConfigEntry 9 }
rPDU2DeviceConfigDevicePeakPowerReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2),
notSupported (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the existing peak power value
to be replaced by the current load power value.
Getting this OID will do nothing and return the noOperation(1) value.
Models that do not support this feature will respond to this OID
with a value of not supported (3). Attempts to set this OID
in these models will fail."
::= { rPDU2DeviceConfigEntry 10 }
rPDU2DeviceConfigDeviceEnergyReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2),
notSupported (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the device energy meter value
to be reset to zero.
Getting this OID in models that support this feature will do nothing
and return the noOperation(1) value.
Models that do not support this feature will respond to this OID
with a value of notSupported (3). Attempts to set this OID
in these models will fail."
::= { rPDU2DeviceConfigEntry 11 }
rPDU2DeviceConfigOutletsEnergyReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2),
notSupported (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the all outlet energy meter values
to be reset to zero.
Getting this OID will do nothing and return the noOperation(1) value.
Models that do not support this feature will respond to this OID
with a value of notSupported (3). Attempts to set this OID
in these models will fail."
::= { rPDU2DeviceConfigEntry 12 }
rPDU2DeviceConfigOutletsPeakLoadReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2),
notSupported (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the all outlet peak load values
to be reset to zero.
Getting this OID will do nothing and return the noOperation(1) value.
Models that do not support this feature will respond to this OID
with a value of notSupported (3). Attempts to set this OID
in these models will fail."
::= { rPDU2DeviceConfigEntry 13 }
rPDU2DeviceConfigContact OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the
person to contact regarding the Rack PDU"
::= { rPDU2DeviceConfigEntry 14 }
-- rPDU2 Device Properties
rPDU2DevicePropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2DevicePropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU properties"
::= { rPDU2Device 2 }
rPDU2DevicePropertiesEntry OBJECT-TYPE
SYNTAX RPDU2DevicePropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Properties of the Rack PDU being queried"
INDEX { rPDU2DevicePropertiesIndex }
::= { rPDU2DevicePropertiesTable 1 }
RPDU2DevicePropertiesEntry ::=
SEQUENCE {
rPDU2DevicePropertiesIndex INTEGER,
rPDU2DevicePropertiesModule INTEGER,
rPDU2DevicePropertiesName DisplayString,
rPDU2DevicePropertiesNumOutlets INTEGER,
rPDU2DevicePropertiesNumSwitchedOutlets INTEGER,
rPDU2DevicePropertiesNumMeteredOutlets INTEGER,
rPDU2DevicePropertiesNumPhases INTEGER,
rPDU2DevicePropertiesNumMeteredBanks INTEGER,
rPDU2DevicePropertiesMaxCurrentRating INTEGER,
rPDU2DevicePropertiesOrientation INTEGER,
rPDU2DevicePropertiesOutletLayout INTEGER,
rPDU2DevicePropertiesMaxPhaseCurrentRating INTEGER,
rPDU2DevicePropertiesDevicePowerRating INTEGER
}
rPDU2DevicePropertiesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU properties table entry"
::= { rPDU2DevicePropertiesEntry 1 }
rPDU2DevicePropertiesModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2DevicePropertiesEntry 2 }
rPDU2DevicePropertiesName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the Rack PDU"
::= { rPDU2DevicePropertiesEntry 3 }
rPDU2DevicePropertiesNumOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outlets on the Rack PDU"
::= { rPDU2DevicePropertiesEntry 4 }
rPDU2DevicePropertiesNumSwitchedOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of switched outlets on the Rack PDU"
::= { rPDU2DevicePropertiesEntry 5 }
rPDU2DevicePropertiesNumMeteredOutlets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of metered outlets on the Rack PDU"
::= { rPDU2DevicePropertiesEntry 6 }
rPDU2DevicePropertiesNumPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of phases present in the Rack PDU"
::= { rPDU2DevicePropertiesEntry 7 }
rPDU2DevicePropertiesNumMeteredBanks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of metered banks present in the Rack PDU"
::= { rPDU2DevicePropertiesEntry 8 }
rPDU2DevicePropertiesMaxCurrentRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum current rating, measured in Amps, for
the Rack PDU"
::= { rPDU2DevicePropertiesEntry 9 }
rPDU2DevicePropertiesOrientation OBJECT-TYPE
SYNTAX INTEGER {
horizontal (1),
vertical (2),
verticalISXv2 (3),
verticalISXv3 (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rack PDU orientation"
::= { rPDU2DevicePropertiesEntry 10 }
rPDU2DevicePropertiesOutletLayout OBJECT-TYPE
SYNTAX INTEGER {
seqPhaseToNeutral (1),
seqPhaseToPhase (2),
seqPhToNeu21PhToPh (3),
seqPhToPhGrouped (4),
seqPhToNGrouped (5),
seqPToN1516PToPGrouped (6),
seqPhToPh2xGrouped (7),
seqPhToN2xGrouped (8),
seqNotApplicable (9),
seqPhToNPhToPhPhToN (10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return outlet layout for the device.
seqPhaseToNeutral(1) indicates outlet layout as follows:
1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,...
or for single phase SKUs, all outlets 1-N
seqPhaseToPhase(2) indicates outlet layout as follows:
1:1-2,2:2-3,3:3-1,4:1-2,5:2-3,...
seqPhToNeu21PhToPh(3) indicates outlet layout as follows:
1:1-N,2:2-N...21:3-N,22:1-2,23:2-3,24:3-1,...
seqPhToPhGrouped(4) indicates outlet layout as follows:
For AP8xxx SKU's Group 1:1-2, Group 2:2-3, Group 3:3-1.
seqPhToNGrouped(5) indicates outlet layout as follows:
This unit has 3 outlet groups. Group 1:1-N, Group 2:2-N, Group 3:3-N.
seqPToN1516PToPGrouped(6) indicates outlet layout as follows:
This unit has 4 outlet groups. Group 1 (Outlets 1-14):1-2,
Group 2 (Outlets 15-16):1-N, Group 3:2-3, Group 4:3-1.
seqPhToPh2xGrouped(7) indicates outlet layout as follows:
This unit has 6 outlet groups. Group 1:1-2, Group 2:1-2, Group 3:2-3,
Group 4:2-3, Group 5:3-1, Group 6:3-1.
seqPhToN2xGrouped(8) indicates outlet layout as follows:
This unit has 6 outlet groups. Group 1:1-N, Group 2:1-N, Group 3:2-N,
Group 4:2-N, Group 5:3-N, Group 6:3-N.
seqNotApplicable(9):
Outlet layout does not affect any of the user interfaces for
AP88XX SKUs. These SKUs may report seqNotApplicable(9) if there is
not an exact outlet layout match available.
seqPhToNPhToPhPhToN(10) indicates outlet layout as follows:
Group 1:1-N, Group 2:1-2, Group 3:2-N."
::= { rPDU2DevicePropertiesEntry 11 }
rPDU2DevicePropertiesMaxPhaseCurrentRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum current rating, measured in Amps, for
the Rack PDU"
::= { rPDU2DevicePropertiesEntry 12 }
rPDU2DevicePropertiesDevicePowerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum power rating, measured in Watts, for
the Rack PDU"
::= { rPDU2DevicePropertiesEntry 13 }
-- rPDU2 Device Status
rPDU2DeviceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2DeviceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU status information"
::= { rPDU2Device 3 }
rPDU2DeviceStatusEntry OBJECT-TYPE
SYNTAX RPDU2DeviceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status information from the Rack PDU being queried"
INDEX { rPDU2DeviceStatusIndex }
::= { rPDU2DeviceStatusTable 1 }
RPDU2DeviceStatusEntry ::=
SEQUENCE {
rPDU2DeviceStatusIndex INTEGER,
rPDU2DeviceStatusModule INTEGER,
rPDU2DeviceStatusName DisplayString,
rPDU2DeviceStatusLoadState INTEGER,
rPDU2DeviceStatusPower INTEGER,
rPDU2DeviceStatusPeakPower INTEGER,
rPDU2DeviceStatusPeakPowerTimestamp DisplayString,
rPDU2DeviceStatusPeakPowerStartTime DisplayString,
rPDU2DeviceStatusEnergy INTEGER,
rPDU2DeviceStatusEnergyStartTime DisplayString,
rPDU2DeviceStatusCommandPending INTEGER,
rPDU2DeviceStatusPowerSupplyAlarm INTEGER,
rPDU2DeviceStatusPowerSupply1Status INTEGER,
rPDU2DeviceStatusPowerSupply2Status INTEGER,
rPDU2DeviceStatusOutletsEnergyStartTime DisplayString,
rPDU2DeviceStatusApparentPower INTEGER,
rPDU2DeviceStatusPowerFactor INTEGER,
rPDU2DeviceStatusNPSType INTEGER
}
rPDU2DeviceStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU status table entry"
::= { rPDU2DeviceStatusEntry 1 }
rPDU2DeviceStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2DeviceStatusEntry 2 }
rPDU2DeviceStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the Rack PDU"
::= { rPDU2DeviceStatusEntry 3 }
rPDU2DeviceStatusLoadState OBJECT-TYPE
SYNTAX INTEGER {
lowLoad (1),
normal (2),
nearOverload (3),
overload (4),
notsupported (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the present load status of the Rack PDU.
Models that do not support this feature will respond to this OID
with a value of notsupported (5)."
::= { rPDU2DeviceStatusEntry 4 }
rPDU2DeviceStatusPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power consumption of the Rack PDU load in hundredths of kilowatts.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { rPDU2DeviceStatusEntry 5 }
rPDU2DeviceStatusPeakPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The peak power consumption of the Rack PDU load in hundredths of kilowatts.
Models that do not support this feature will respond to this OID with a value
of -1."
::= { rPDU2DeviceStatusEntry 6 }
rPDU2DeviceStatusPeakPowerTimestamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time that peak power consumption occurred.
Models that do not support this feature will respond to this OID with string
'notsupported'."
::= { rPDU2DeviceStatusEntry 7 }
rPDU2DeviceStatusPeakPowerStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time of the last device peak power reset.
Models that do not support this feature will respond to this OID with string
'notsupported'."
::= { rPDU2DeviceStatusEntry 8 }
rPDU2DeviceStatusEnergy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user resettable energy meter measuring Rack PDU load
energy consumption in tenths of kilowatt-hours. Models that do not
support this feature will respond to this OID
with a value of -1."
::= { rPDU2DeviceStatusEntry 9 }
rPDU2DeviceStatusEnergyStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time of the last device energy
meter reset. Models that do not support this feature will
respond to this OID with string 'notsupported'."
::= { rPDU2DeviceStatusEntry 10 }
rPDU2DeviceStatusCommandPending OBJECT-TYPE
SYNTAX INTEGER {
commandPending (1),
noCommandPending (2),
commandPendingUnknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not the device
is processing a pending command. If
the commandPendingUnknown (3) value is
returned, all devices powered by the
Rack PDU should be shut down. The
Rack PDU's power should then be cycled
to clear this condition."
::= { rPDU2DeviceStatusEntry 11 }
rPDU2DeviceStatusPowerSupplyAlarm OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates a power supply alarm is active when value
equals alarm (2)"
::= { rPDU2DeviceStatusEntry 12 }
rPDU2DeviceStatusPowerSupply1Status OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2),
notInstalled (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not an alarm is active in Power
Supply 1"
::= { rPDU2DeviceStatusEntry 13 }
rPDU2DeviceStatusPowerSupply2Status OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2),
notInstalled (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not an alarm is active in Power
Supply 2"
::= { rPDU2DeviceStatusEntry 14 }
rPDU2DeviceStatusOutletsEnergyStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time of the last outlets energy
meter reset. Models that do not support this feature will
respond to this OID with string 'notsupported'."
::= { rPDU2DeviceStatusEntry 15 }
rPDU2DeviceStatusApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The apparent power consumption of the Rack PDU load in hundredths of kiloVoltAmps (kVA).
Models that do not support this feature will respond to this OID
with a value of -1."
::= { rPDU2DeviceStatusEntry 16 }
rPDU2DeviceStatusPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power factor of the Rack PDU load in hundredths. Models that do not support this feature
will respond to this OID with a value of -1."
::= { rPDU2DeviceStatusEntry 17 }
rPDU2DeviceStatusNPSType OBJECT-TYPE
SYNTAX INTEGER {
notNPS (1),
host (2),
guest (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device NPS status:
notNPS (1) indicates the Rack PDU is not in an NPS group.
host (2) indicates the Rack PDU has been designated as a host in an NPS group.
Only one Rack PDU in an NPS group is allowed to be the host.
guest (3) indicates the Rack PDU has been designated as a guest in an NPS group."
::= { rPDU2DeviceStatusEntry 18 }
-- rPDU2 Device Control
rPDU2DeviceControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2DeviceControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU control data"
::= { rPDU2Device 4 }
rPDU2DeviceControlEntry OBJECT-TYPE
SYNTAX RPDU2DeviceControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Control data from Rack PDU being queried"
INDEX { rPDU2DeviceControlIndex }
::= { rPDU2DeviceControlTable 1 }
RPDU2DeviceControlEntry ::=
SEQUENCE {
rPDU2DeviceControlIndex INTEGER,
rPDU2DeviceControlModule INTEGER,
rPDU2DeviceControlName DisplayString,
rPDU2DeviceControlCommand INTEGER
}
rPDU2DeviceControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU control table entry"
::= { rPDU2DeviceControlEntry 1 }
rPDU2DeviceControlModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2DeviceControlEntry 2 }
rPDU2DeviceControlName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the Rack PDU"
::= { rPDU2DeviceControlEntry 3 }
rPDU2DeviceControlCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateAllOn (1),
delayedAllOn (2),
immediateAllOff (3),
immediateAllReboot (4),
delayedAllReboot (5),
noCommandAll (6),
delayedAllOff (7),
cancelAllPendingCommands (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to immediateAllOn (1) will turn all outlets
on immediately.
Setting this OID to delayedAllOn (2) will turn all outlets on as
defined by each outlet's rPDU2OutletSwitchedConfigPowerOnTime
OID value.
Setting this OID to immediateAllOff (3) will turn all outlets
off immediately.
Setting this OID to immediateAllReboot (4) will cause an immediateAllOff
command to be performed. Once all outlets are off, the
Switched Rack PDU will then delay the
rPDU2OutletSwitchedConfigRebootDuration OID time, and then perform an
immediateAllOn command.
Setting this OID to delayedAllReboot (5) will cause a
delayedAllOff command to be performed. Once all outlets are off,
the Switched Rack PDU will then delay the largest
rPDU2OutletSwitchedConfigRebootDuration OID time, and then perform a
delayedAllOn command.
Setting this OID to noCommandAll (6) will have no effect.
Setting this OID to delayedAllOff (7) will turn all outlets off
as defined by each outlet's rPDU2OutletSwitchedConfigPowerOffTime
OID value.
Setting this OID to cancelAllPendingCommands (8) will cause all pending
commands on the Switched Rack PDU to be cancelled.
Getting this OID will return the noCommandAll (6)
value."
::= { rPDU2DeviceControlEntry 4 }
-- rPDU2 Phase Data
rPDU2PhaseTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected Rack PDU phases"
::= { rPDU2 5}
rPDU2Phase OBJECT IDENTIFIER ::= { rPDU2 6 }
-- rPDU2 Phase Config
rPDU2PhaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2PhaseConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU phase configuration data"
::= { rPDU2Phase 1 }
rPDU2PhaseConfigEntry OBJECT-TYPE
SYNTAX RPDU2PhaseConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from currently queried Rack
PDU phase"
INDEX { rPDU2PhaseConfigIndex }
::= { rPDU2PhaseConfigTable 1 }
RPDU2PhaseConfigEntry ::=
SEQUENCE {
rPDU2PhaseConfigIndex INTEGER,
rPDU2PhaseConfigModule INTEGER,
rPDU2PhaseConfigNumber INTEGER,
rPDU2PhaseConfigOverloadRestriction INTEGER,
rPDU2PhaseConfigLowLoadCurrentThreshold INTEGER,
rPDU2PhaseConfigNearOverloadCurrentThreshold INTEGER,
rPDU2PhaseConfigOverloadCurrentThreshold INTEGER,
rPDU2PhaseConfigPhasePeakCurrentReset INTEGER
}
rPDU2PhaseConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU phase configuration
table entry"
::= { rPDU2PhaseConfigEntry 1 }
rPDU2PhaseConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2PhaseConfigEntry 2 }
rPDU2PhaseConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric phase ID"
::= { rPDU2PhaseConfigEntry 3 }
rPDU2PhaseConfigOverloadRestriction OBJECT-TYPE
SYNTAX INTEGER {
alwaysAllowTurnON (1),
restrictOnNearOverload (2),
restrictOnOverload (3),
notSupported (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID controls the behavior of a Switched Rack PDU
phase when an overload condition is possible and
additional outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow
the outlets on the corresponding phase to turn on.
Setting this OID to restrictOnNearOverload (2) will not allow
outlets on the corresponding phase to turn on if the
rPDULoadConfigNearOverloadThreshold OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow
outlets on the corresponding phase to turn on if the
rPDULoadConfigOverloadThreshold OID is exceeded.
Models that do not support this feature will respond to this OID
with a value of notSupported (4). Attempts to set this OID
in these models will fail."
::= { rPDU2PhaseConfigEntry 4 }
rPDU2PhaseConfigLowLoadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined low load phase current
threshold in Amps"
::= { rPDU2PhaseConfigEntry 5 }
rPDU2PhaseConfigNearOverloadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined near phase overload warning
threshold in Amps"
::= { rPDU2PhaseConfigEntry 6 }
rPDU2PhaseConfigOverloadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined phase overload current
threshold in Amps"
::= { rPDU2PhaseConfigEntry 7 }
rPDU2PhaseConfigPhasePeakCurrentReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the existing peak current value
to be replaced by the present load current value.
Getting this OID will do nothing and return the noOperation(1) value."
::= { rPDU2PhaseConfigEntry 8 }
-- rPDU2 Phase Properties
rPDU2PhasePropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2PhasePropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU phase properties"
::= { rPDU2Phase 2 }
rPDU2PhasePropertiesEntry OBJECT-TYPE
SYNTAX RPDU2PhasePropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Properties of the currently queried Rack
PDU phase"
INDEX { rPDU2PhasePropertiesIndex }
::= { rPDU2PhasePropertiesTable 1 }
RPDU2PhasePropertiesEntry ::=
SEQUENCE {
rPDU2PhasePropertiesIndex INTEGER,
rPDU2PhasePropertiesModule INTEGER,
rPDU2PhasePropertiesNumber INTEGER
}
rPDU2PhasePropertiesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU phase properties
table entry"
::= { rPDU2PhasePropertiesEntry 1 }
rPDU2PhasePropertiesModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2PhasePropertiesEntry 2 }
rPDU2PhasePropertiesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric phase ID"
::= { rPDU2PhasePropertiesEntry 3 }
-- rPDU2 Phase Status
rPDU2PhaseStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2PhaseStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU phase status data"
::= { rPDU2Phase 3 }
rPDU2PhaseStatusEntry OBJECT-TYPE
SYNTAX RPDU2PhaseStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status data from currently queried Rack PDU
phase"
INDEX { rPDU2PhaseStatusIndex }
::= { rPDU2PhaseStatusTable 1 }
RPDU2PhaseStatusEntry ::=
SEQUENCE {
rPDU2PhaseStatusIndex INTEGER,
rPDU2PhaseStatusModule INTEGER,
rPDU2PhaseStatusNumber INTEGER,
rPDU2PhaseStatusLoadState INTEGER,
rPDU2PhaseStatusCurrent INTEGER,
rPDU2PhaseStatusVoltage INTEGER,
rPDU2PhaseStatusPower INTEGER,
rPDU2PhaseStatusApparentPower INTEGER,
rPDU2PhaseStatusPowerFactor INTEGER,
rPDU2PhaseStatusPeakCurrent INTEGER,
rPDU2PhaseStatusPeakCurrentTimestamp DisplayString,
rPDU2PhaseStatusPeakCurrentStartTime DisplayString
}
rPDU2PhaseStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU phase status table
entry"
::= { rPDU2PhaseStatusEntry 1 }
rPDU2PhaseStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2PhaseStatusEntry 2 }
rPDU2PhaseStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric phase ID"
::= { rPDU2PhaseStatusEntry 3 }
rPDU2PhaseStatusLoadState OBJECT-TYPE
SYNTAX INTEGER {
lowLoad (1),
normal (2),
nearOverload (3),
overload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the present load status of the Rack PDU
phase being queried"
::= { rPDU2PhaseStatusEntry 4 }
rPDU2PhaseStatusCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current draw, in tenths of Amps, of the load
on the Rack PDU phase being queried"
::= { rPDU2PhaseStatusEntry 5 }
rPDU2PhaseStatusVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Voltage, in Volts, of the Rack
PDU phase being queried. Models that do not support this
feature will respond to this OID with a value of -1."
::= { rPDU2PhaseStatusEntry 6 }
rPDU2PhaseStatusPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the load power, in hundredths of kilowatts (kW),
consumed on the Rack PDU phase being queried.
Models that do not support this feature will respond to this
OID with a value of -1."
::= { rPDU2PhaseStatusEntry 7 }
rPDU2PhaseStatusApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the load apparent power, in hundredths of kiloVoltAmps (kVA),
consumed on the Rack PDU phase being queried.
Models that do not support this feature will respond to this
OID with a value of -1."
::= { rPDU2PhaseStatusEntry 8 }
rPDU2PhaseStatusPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the load power factor, in hundredths,
of the Rack PDU phase being queried.
Models that do not support this feature will respond to
this OID with a value of -1."
::= { rPDU2PhaseStatusEntry 9 }
rPDU2PhaseStatusPeakCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The peak current of the Rack PDU phase load in tenths of Amps"
::= { rPDU2PhaseStatusEntry 10 }
rPDU2PhaseStatusPeakCurrentTimestamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time that the peak current occurred"
::= { rPDU2PhaseStatusEntry 11 }
rPDU2PhaseStatusPeakCurrentStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time of the last phase peak current reset"
::= { rPDU2PhaseStatusEntry 12 }
-- rPDU2 Bank Data
rPDU2BankTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected Rack PDU banks"
::= { rPDU2 7}
rPDU2Bank OBJECT IDENTIFIER ::= { rPDU2 8 }
-- rPDU2 Bank Config
rPDU2BankConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2BankConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU bank configuration data"
::= { rPDU2Bank 1 }
rPDU2BankConfigEntry OBJECT-TYPE
SYNTAX RPDU2BankConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from currently queried
Rack PDU bank"
INDEX { rPDU2BankConfigIndex }
::= { rPDU2BankConfigTable 1 }
RPDU2BankConfigEntry ::=
SEQUENCE {
rPDU2BankConfigIndex INTEGER,
rPDU2BankConfigModule INTEGER,
rPDU2BankConfigNumber INTEGER,
rPDU2BankConfigOverloadRestriction INTEGER,
rPDU2BankConfigLowLoadCurrentThreshold INTEGER,
rPDU2BankConfigNearOverloadCurrentThreshold INTEGER,
rPDU2BankConfigOverloadCurrentThreshold INTEGER,
rPDU2BankConfigBankPeakCurrentReset INTEGER
}
rPDU2BankConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU bank configuration
table entry"
::= { rPDU2BankConfigEntry 1 }
rPDU2BankConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2BankConfigEntry 2 }
rPDU2BankConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric bank ID"
::= { rPDU2BankConfigEntry 3 }
rPDU2BankConfigOverloadRestriction OBJECT-TYPE
SYNTAX INTEGER {
alwaysAllowTurnON (1),
restrictOnNearOverload (2),
restrictOnOverload (3),
notSupported (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID controls the behavior of a Switched Rack PDU
bank when an overload condition is possible and
additional outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow
the outlets on the corresponding bank to turn on.
Setting this OID to restrictOnNearOverload (2) will not allow
outlets on the corresponding bank to turn on if the
rPDU2BankConfigNearOverloadCurrentThreshold OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow
outlets on the corresponding bank to turn on if the
rPDU2BankConfigOverloadCurrentThreshold OID is exceeded.
Models that do not support this feature will respond to this OID
with a value of notSupported (4). Attempts to set this OID
in these models will fail."
::= { rPDU2BankConfigEntry 4 }
rPDU2BankConfigLowLoadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined low load bank current
threshold in Amps"
::= { rPDU2BankConfigEntry 5 }
rPDU2BankConfigNearOverloadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined near bank overload current warning
threshold in Amps"
::= { rPDU2BankConfigEntry 6 }
rPDU2BankConfigOverloadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined bank overload current threshold
in Amps"
::= { rPDU2BankConfigEntry 7 }
rPDU2BankConfigBankPeakCurrentReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the existing peak current value
to be replaced by the present load current value.
Getting this OID will do nothing and return the noOperation(1) value."
::= { rPDU2BankConfigEntry 8 }
-- rPDU2 Bank Properties
rPDU2BankPropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2BankPropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU bank properties"
::= { rPDU2Bank 2 }
rPDU2BankPropertiesEntry OBJECT-TYPE
SYNTAX RPDU2BankPropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Properties of the currently queried
Rack PDU bank"
INDEX { rPDU2BankPropertiesIndex }
::= { rPDU2BankPropertiesTable 1 }
RPDU2BankPropertiesEntry ::=
SEQUENCE {
rPDU2BankPropertiesIndex INTEGER,
rPDU2BankPropertiesModule INTEGER,
rPDU2BankPropertiesNumber INTEGER,
rPDU2BankPropertiesPhaseLayout Rpdu2OutletPhaseLayoutType,
rPDU2BankPropertiesBreakerRating INTEGER
}
rPDU2BankPropertiesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU bank properties
table entry"
::= { rPDU2BankPropertiesEntry 1 }
rPDU2BankPropertiesModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2BankPropertiesEntry 2 }
rPDU2BankPropertiesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric bank ID"
::= { rPDU2BankPropertiesEntry 3 }
rPDU2BankPropertiesPhaseLayout OBJECT-TYPE
SYNTAX Rpdu2OutletPhaseLayoutType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID describes the outlet phase connections on
the referenced bank as follows:
seqPhase1ToNeutral(1) indicates that bank outlets are
wired from Phase 1 to Neutral.
seqPhase2ToNeutral(2) indicates that bank outlets are
wired from Phase 2 to Neutral.
seqPhase3ToNeutral(3) indicates that bank outlets are
wired from Phase 3 to Neutral.
seqPhase1ToPhase2(4) indicates that bank outlets are
wired from Phase 1 to Phase 2.
seqPhase2ToPhase3(5) indicates that bank outlets are
wired from Phase 2 to Phase 3.
seqPhase3ToPhase1(6) indicates that bank outlets are
wired from Phase 3 to Phase 1."
::= { rPDU2BankPropertiesEntry 4 }
rPDU2BankPropertiesBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If bank circuit breakers are present on the device, this OID will return
the rating of the breaker in Amps."
::= { rPDU2BankPropertiesEntry 5 }
-- rPDU2 Bank Status
rPDU2BankStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2BankStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU bank status data"
::= { rPDU2Bank 3 }
rPDU2BankStatusEntry OBJECT-TYPE
SYNTAX RPDU2BankStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status data from currently queried Rack PDU
bank"
INDEX { rPDU2BankStatusIndex }
::= { rPDU2BankStatusTable 1 }
RPDU2BankStatusEntry ::=
SEQUENCE {
rPDU2BankStatusIndex INTEGER,
rPDU2BankStatusModule INTEGER,
rPDU2BankStatusNumber INTEGER,
rPDU2BankStatusLoadState INTEGER,
rPDU2BankStatusCurrent INTEGER,
rPDU2BankStatusPeakCurrent INTEGER,
rPDU2BankStatusPeakCurrentTimestamp DisplayString,
rPDU2BankStatusPeakCurrentStartTime DisplayString
}
rPDU2BankStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU bank status
table entry"
::= { rPDU2BankStatusEntry 1 }
rPDU2BankStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2BankStatusEntry 2 }
rPDU2BankStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric bank ID"
::= { rPDU2BankStatusEntry 3 }
rPDU2BankStatusLoadState OBJECT-TYPE
SYNTAX INTEGER {
lowLoad (1),
normal (2),
nearOverload (3),
overload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the present load status of the Rack PDU
bank being queried"
::= { rPDU2BankStatusEntry 4 }
rPDU2BankStatusCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current draw, in tenths of Amps, of the load
on the Rack PDU bank being queried"
::= { rPDU2BankStatusEntry 5 }
rPDU2BankStatusPeakCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The peak current of the Rack PDU bank load in tenths of Amps"
::= { rPDU2BankStatusEntry 6 }
rPDU2BankStatusPeakCurrentTimestamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time the bank peak current occurred"
::= { rPDU2BankStatusEntry 7 }
rPDU2BankStatusPeakCurrentStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time of the last bank peak current reset"
::= { rPDU2BankStatusEntry 8 }
-- rPDU2 Outlet Data
rPDU2Outlet OBJECT IDENTIFIER ::= { rPDU2 9 }
-- rPDU2 Switched Outlet Data
rPDU2OutletSwitchedTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of switched outlets on connected Rack PDUs"
::= { rPDU2Outlet 1}
rPDU2OutletSwitched OBJECT IDENTIFIER ::= { rPDU2Outlet 2 }
-- rPDU2 Switched Outlet Config
rPDU2OutletSwitchedConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletSwitchedConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU switched outlet configuration data"
::= { rPDU2OutletSwitched 1 }
rPDU2OutletSwitchedConfigEntry OBJECT-TYPE
SYNTAX RPDU2OutletSwitchedConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from currently queried
Rack PDU switched outlet"
INDEX { rPDU2OutletSwitchedConfigIndex }
::= { rPDU2OutletSwitchedConfigTable 1 }
RPDU2OutletSwitchedConfigEntry ::=
SEQUENCE {
rPDU2OutletSwitchedConfigIndex INTEGER,
rPDU2OutletSwitchedConfigModule INTEGER,
rPDU2OutletSwitchedConfigName DisplayString,
rPDU2OutletSwitchedConfigNumber INTEGER,
rPDU2OutletSwitchedConfigPowerOnTime INTEGER,
rPDU2OutletSwitchedConfigPowerOffTime INTEGER,
rPDU2OutletSwitchedConfigRebootDuration INTEGER,
rPDU2OutletSwitchedConfigExternalLink DisplayString
}
rPDU2OutletSwitchedConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU switched outlet
configuration table entry"
::= { rPDU2OutletSwitchedConfigEntry 1 }
rPDU2OutletSwitchedConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletSwitchedConfigEntry 2 }
rPDU2OutletSwitchedConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user-defined switched outlet ID string"
::= { rPDU2OutletSwitchedConfigEntry 3 }
rPDU2OutletSwitchedConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID"
::= { rPDU2OutletSwitchedConfigEntry 4 }
rPDU2OutletSwitchedConfigPowerOnTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of delay, in seconds, between when
power is provided to the Rack PDU and when
this switched outlet starts providing power.
Range -1...300 where -1 = Never power on,
0 = immediate power on, and 1-300 = seconds to
delay."
::= { rPDU2OutletSwitchedConfigEntry 5 }
rPDU2OutletSwitchedConfigPowerOffTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time, in seconds, this outlet will
delay powering off.
Range -1...360 where -1 = Never power off,
0 = immediate power off, and 1-360 = seconds to
delay."
::= { rPDU2OutletSwitchedConfigEntry 6 }
rPDU2OutletSwitchedConfigRebootDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"After turning power off during a reboot sequence,
the amount of time to wait before turning power
to this outlet back on.
Range 5-60 seconds delay."
::= { rPDU2OutletSwitchedConfigEntry 7 }
rPDU2OutletSwitchedConfigExternalLink OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined external device web link.
Possible use cases could be the IP address of the external device
plugged into the outlet or its manufacturer web page for convenient
support such as user manuals, specifications, drivers, etc."
::= { rPDU2OutletSwitchedConfigEntry 8 }
-- rPDU2 Switched Outlet Config
rPDU2OutletSwitchedPropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletSwitchedPropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU switched outlet properties"
::= { rPDU2OutletSwitched 2 }
rPDU2OutletSwitchedPropertiesEntry OBJECT-TYPE
SYNTAX RPDU2OutletSwitchedPropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Properties of the currently queried Rack PDU
switched outlet"
INDEX { rPDU2OutletSwitchedPropertiesIndex }
::= { rPDU2OutletSwitchedPropertiesTable 1 }
RPDU2OutletSwitchedPropertiesEntry ::=
SEQUENCE {
rPDU2OutletSwitchedPropertiesIndex INTEGER,
rPDU2OutletSwitchedPropertiesModule INTEGER,
rPDU2OutletSwitchedPropertiesName DisplayString,
rPDU2OutletSwitchedPropertiesNumber INTEGER,
rPDU2OutletSwitchedPropertiesPhaseLayout Rpdu2OutletPhaseLayoutType,
rPDU2OutletSwitchedPropertiesBank INTEGER
}
rPDU2OutletSwitchedPropertiesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU switched outlet
properties table entry"
::= { rPDU2OutletSwitchedPropertiesEntry 1 }
rPDU2OutletSwitchedPropertiesModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletSwitchedPropertiesEntry 2 }
rPDU2OutletSwitchedPropertiesName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined switched outlet ID string"
::= { rPDU2OutletSwitchedPropertiesEntry 3 }
rPDU2OutletSwitchedPropertiesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID"
::= { rPDU2OutletSwitchedPropertiesEntry 4 }
rPDU2OutletSwitchedPropertiesPhaseLayout OBJECT-TYPE
SYNTAX Rpdu2OutletPhaseLayoutType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID describes the phase connections of
the referenced outlet as follows:
seqPhase1ToNeutral(1) indicates that the outlet is
wired from Phase 1 to Neutral.
seqPhase2ToNeutral(2) indicates that the outlet is
wired from Phase 2 to Neutral.
seqPhase3ToNeutral(3) indicates that the outlet is
wired from Phase 3 to Neutral.
seqPhase1ToPhase2(4) indicates that the outlet is
wired from Phase 1 to Phase 2.
seqPhase2ToPhase3(5) indicates that the outlet is
wired from Phase 2 to Phase 3.
seqPhase3ToPhase1(6) indicates that the outlet is
wired from Phase 3 to Phase 1."
::= { rPDU2OutletSwitchedPropertiesEntry 5 }
rPDU2OutletSwitchedPropertiesBank OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric bank ID"
::= { rPDU2OutletSwitchedPropertiesEntry 6 }
-- rPDU2 Switched Outlet Status
rPDU2OutletSwitchedStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletSwitchedStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU switched outlet status
information"
::= { rPDU2OutletSwitched 3 }
rPDU2OutletSwitchedStatusEntry OBJECT-TYPE
SYNTAX RPDU2OutletSwitchedStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status information for currently queried
Rack PDU switched outlet"
INDEX { rPDU2OutletSwitchedStatusIndex }
::= { rPDU2OutletSwitchedStatusTable 1 }
RPDU2OutletSwitchedStatusEntry ::=
SEQUENCE {
rPDU2OutletSwitchedStatusIndex INTEGER,
rPDU2OutletSwitchedStatusModule INTEGER,
rPDU2OutletSwitchedStatusName DisplayString,
rPDU2OutletSwitchedStatusNumber INTEGER,
rPDU2OutletSwitchedStatusState INTEGER,
rPDU2OutletSwitchedStatusCommandPending INTEGER,
rPDU2OutletSwitchedStatusExternalLink DisplayString
}
rPDU2OutletSwitchedStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU switched outlet
status information table entry"
::= { rPDU2OutletSwitchedStatusEntry 1 }
rPDU2OutletSwitchedStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletSwitchedStatusEntry 2 }
rPDU2OutletSwitchedStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined switched outlet ID string"
::= { rPDU2OutletSwitchedStatusEntry 3 }
rPDU2OutletSwitchedStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID"
::= { rPDU2OutletSwitchedStatusEntry 4 }
rPDU2OutletSwitchedStatusState OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the present switch state of the Rack
PDU switched outlet being queried"
::= { rPDU2OutletSwitchedStatusEntry 5 }
rPDU2OutletSwitchedStatusCommandPending OBJECT-TYPE
SYNTAX INTEGER {
commandPending (1),
noCommandPending (2),
commandPendingUnknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not the device is
processing a command for this outlet.
If the commandPendingUnknown (3) value is
returned, all devices powered by the Rack PDU
should be shut down. The Rack PDU's power
should then be cycled to clear this condition."
::= { rPDU2OutletSwitchedStatusEntry 6 }
rPDU2OutletSwitchedStatusExternalLink OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each RPDU outlet can have its own external web URL link.
This can be configured in the rPDU2OutletSwitchedConfigExternalLink OID.
When this link is clicked in the web interface, the linked URL will
open in the web browser."
::= { rPDU2OutletSwitchedStatusEntry 7 }
-- rPDU2 Switched Outlet Control
rPDU2OutletSwitchedControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletSwitchedControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU switched outlet control
data"
::= { rPDU2OutletSwitched 4 }
rPDU2OutletSwitchedControlEntry OBJECT-TYPE
SYNTAX RPDU2OutletSwitchedControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Control data for currently queried Rack
PDU switched outlet"
INDEX { rPDU2OutletSwitchedControlIndex }
::= { rPDU2OutletSwitchedControlTable 1 }
RPDU2OutletSwitchedControlEntry ::=
SEQUENCE {
rPDU2OutletSwitchedControlIndex INTEGER,
rPDU2OutletSwitchedControlModule INTEGER,
rPDU2OutletSwitchedControlName DisplayString,
rPDU2OutletSwitchedControlNumber INTEGER,
rPDU2OutletSwitchedControlCommand INTEGER
}
rPDU2OutletSwitchedControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU switched outlet
control data table entry"
::= { rPDU2OutletSwitchedControlEntry 1 }
rPDU2OutletSwitchedControlModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletSwitchedControlEntry 2 }
rPDU2OutletSwitchedControlName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined switched outlet ID string"
::= { rPDU2OutletSwitchedControlEntry 3 }
rPDU2OutletSwitchedControlNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID"
::= { rPDU2OutletSwitchedControlEntry 4 }
rPDU2OutletSwitchedControlCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateOn (1),
immediateOff (2),
immediateReboot (3),
outletUnknown (4),
delayedOn (5),
delayedOff (6),
delayedReboot (7),
cancelPendingCommand (8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the immediateOn (1) value will be returned.
If the outlet is off, the immediateOff (2) value will be
returned. If the state of the outlet cannot be
determined, the outletUnknown (4) value will be returned.
If the outletUnknown condition should occur, all devices
powered by the PDU should be shut down. The PDU's power
should then be cycled to clear this condition.
Setting this variable to immediateOn (1) will immediately turn
the outlet on.
Setting this variable to immediateOff (2) will immediately turn
the outlet off.
Setting this variable to immediateReboot (3) will cause the
Switched Rack PDU to perform an immediateOff command, wait the
rPDU2OutletSwitchedConfigRebootDuration OID time, and then perform an
immediateOn command.
Setting this variable to delayedOn (5) will turn the outlet on
after the rPDU2OutletSwitchedConfigPowerOnTime OID time has elapsed.
Setting this variable to delayedOff (6) will turn the outlet off
after the rPDU2OutletSwitchedConfigPowerOffTime OID time has elapsed.
Setting this variable to delayedReboot (7) will cause the
Switched Rack PDU to perform a delayedOff command, wait the
rPDU2OutletSwitchedConfigRebootDuration OID time, and then perform a
delayedOn command.
Setting this variable to cancelPendingCommand (8) will cause any
pending command to this outlet to be cancelled."
::= { rPDU2OutletSwitchedControlEntry 5 }
-- rPDU2 Metered Outlet Data
rPDU2OutletMeteredTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of metered outlets on connect Rack PDUs"
::= { rPDU2Outlet 3}
rPDU2OutletMetered OBJECT IDENTIFIER ::= { rPDU2Outlet 4 }
-- rPDU2 Metered Outlet Config
rPDU2OutletMeteredConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletMeteredConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU metered outlet configuration data"
::= { rPDU2OutletMetered 1 }
rPDU2OutletMeteredConfigEntry OBJECT-TYPE
SYNTAX RPDU2OutletMeteredConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from currently queried
Rack PDU metered outlet"
INDEX { rPDU2OutletMeteredConfigIndex }
::= { rPDU2OutletMeteredConfigTable 1 }
RPDU2OutletMeteredConfigEntry ::=
SEQUENCE {
rPDU2OutletMeteredConfigIndex INTEGER,
rPDU2OutletMeteredConfigModule INTEGER,
rPDU2OutletMeteredConfigName DisplayString,
rPDU2OutletMeteredConfigNumber INTEGER,
rPDU2OutletMeteredConfigLowLoadCurrentThreshold INTEGER,
rPDU2OutletMeteredConfigNearOverloadCurrentThreshold INTEGER,
rPDU2OutletMeteredConfigOverloadCurrentThreshold INTEGER,
rPDU2OutletMeteredConfigExternalLink DisplayString
}
rPDU2OutletMeteredConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU metered outlet
configuration table entry"
::= { rPDU2OutletMeteredConfigEntry 1 }
rPDU2OutletMeteredConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletMeteredConfigEntry 2 }
rPDU2OutletMeteredConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user-defined metered outlet ID string"
::= { rPDU2OutletMeteredConfigEntry 3 }
rPDU2OutletMeteredConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID"
::= { rPDU2OutletMeteredConfigEntry 4 }
rPDU2OutletMeteredConfigLowLoadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined low load outlet current threshold in Watts"
::= { rPDU2OutletMeteredConfigEntry 5 }
rPDU2OutletMeteredConfigNearOverloadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined near outlet overload warning threshold
in Watts"
::= { rPDU2OutletMeteredConfigEntry 6 }
rPDU2OutletMeteredConfigOverloadCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined outlet overload current threshold in Watts"
::= { rPDU2OutletMeteredConfigEntry 7 }
rPDU2OutletMeteredConfigExternalLink OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined external device web link.
Possible use cases could be the IP address of the external device
plugged into the outlet or its manufacturer web page for convenient
support such as user manuals, specifications, drivers, etc."
::= { rPDU2OutletMeteredConfigEntry 8 }
-- rPDU2 Metered Outlet Properties
rPDU2OutletMeteredPropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletMeteredPropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU metered outlet properties"
::= { rPDU2OutletMetered 2 }
rPDU2OutletMeteredPropertiesEntry OBJECT-TYPE
SYNTAX RPDU2OutletMeteredPropertiesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Properties of currently queried Rack PDU
metered outlet"
INDEX { rPDU2OutletMeteredPropertiesIndex }
::= { rPDU2OutletMeteredPropertiesTable 1 }
RPDU2OutletMeteredPropertiesEntry ::=
SEQUENCE {
rPDU2OutletMeteredPropertiesIndex INTEGER,
rPDU2OutletMeteredPropertiesModule INTEGER,
rPDU2OutletMeteredPropertiesName DisplayString,
rPDU2OutletMeteredPropertiesNumber INTEGER,
rPDU2OutletMeteredPropertiesLayout Rpdu2OutletPhaseLayoutType,
rPDU2OutletMeteredPropertiesPowerRating INTEGER,
rPDU2OutletMeteredPropertiesBank INTEGER
}
rPDU2OutletMeteredPropertiesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU metered properties table
entry"
::= { rPDU2OutletMeteredPropertiesEntry 1 }
rPDU2OutletMeteredPropertiesModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletMeteredPropertiesEntry 2 }
rPDU2OutletMeteredPropertiesName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined metered outlet ID string"
::= { rPDU2OutletMeteredPropertiesEntry 3 }
rPDU2OutletMeteredPropertiesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric metered outlet ID"
::= { rPDU2OutletMeteredPropertiesEntry 4 }
rPDU2OutletMeteredPropertiesLayout OBJECT-TYPE
SYNTAX Rpdu2OutletPhaseLayoutType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID describes the phase connections of
the referenced outlet as follows:
seqPhase1ToNeutral(1) indicates that the outlet is
wired from Phase 1 to Neutral.
seqPhase2ToNeutral(2) indicates that the outlet is
wired from Phase 2 to Neutral.
seqPhase3ToNeutral(3) indicates that the outlet is
wired from Phase 3 to Neutral.
seqPhase1ToPhase2(4) indicates that the outlet is
wired from Phase 1 to Phase 2.
seqPhase2ToPhase3(5) indicates that the outlet is
wired from Phase 2 to Phase 3.
seqPhase3ToPhase1(6) indicates that the outlet is
wired from Phase 3 to Phase 1."
::= { rPDU2OutletMeteredPropertiesEntry 5 }
rPDU2OutletMeteredPropertiesPowerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum power rating of Rack PDU metered outlet"
::= { rPDU2OutletMeteredPropertiesEntry 6 }
rPDU2OutletMeteredPropertiesBank OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This outlet's numeric bank ID"
::= { rPDU2OutletMeteredPropertiesEntry 7 }
-- rPDU2 Metered Outlet Status
rPDU2OutletMeteredStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2OutletMeteredStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU metered outlet status data"
::= { rPDU2OutletMetered 3 }
rPDU2OutletMeteredStatusEntry OBJECT-TYPE
SYNTAX RPDU2OutletMeteredStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status data from currently queried Rack PDU
metered outlet"
INDEX { rPDU2OutletMeteredStatusIndex }
::= { rPDU2OutletMeteredStatusTable 1 }
RPDU2OutletMeteredStatusEntry ::=
SEQUENCE {
rPDU2OutletMeteredStatusIndex INTEGER,
rPDU2OutletMeteredStatusModule INTEGER,
rPDU2OutletMeteredStatusName DisplayString,
rPDU2OutletMeteredStatusNumber INTEGER,
rPDU2OutletMeteredStatusState INTEGER,
rPDU2OutletMeteredStatusCurrent INTEGER,
rPDU2OutletMeteredStatusPower INTEGER,
rPDU2OutletMeteredStatusPeakPower INTEGER,
rPDU2OutletMeteredStatusPeakPowerTimestamp DisplayString,
rPDU2OutletMeteredStatusPeakPowerStartTime DisplayString,
rPDU2OutletMeteredStatusEnergy INTEGER,
rPDU2OutletMeteredStatusReceptacleType DisplayString,
rPDU2OutletMeteredStatusExternalLink DisplayString
}
rPDU2OutletMeteredStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU metered status table
entry"
::= { rPDU2OutletMeteredStatusEntry 1 }
rPDU2OutletMeteredStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2OutletMeteredStatusEntry 2 }
rPDU2OutletMeteredStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined metered outlet ID string"
::= { rPDU2OutletMeteredStatusEntry 3 }
rPDU2OutletMeteredStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric metered outlet ID"
::= { rPDU2OutletMeteredStatusEntry 4 }
rPDU2OutletMeteredStatusState OBJECT-TYPE
SYNTAX INTEGER {
lowLoad (1),
normal (2),
nearOverload (3),
overload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the present load status of the Rack
PDU metered outlet being queried"
::= { rPDU2OutletMeteredStatusEntry 5 }
rPDU2OutletMeteredStatusCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current draw, in tenths
of Amps, of the load on the Rack PDU
outlet being queried"
::= { rPDU2OutletMeteredStatusEntry 6 }
rPDU2OutletMeteredStatusPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power draw of the load
on the Rack PDU outlet being queried"
::= { rPDU2OutletMeteredStatusEntry 7 }
rPDU2OutletMeteredStatusPeakPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the peak power load draw
on the Rack PDU outlet being queried"
::= { rPDU2OutletMeteredStatusEntry 8 }
rPDU2OutletMeteredStatusPeakPowerTimestamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time that this metered
outlet's peak power consumption occurred"
::= { rPDU2OutletMeteredStatusEntry 9 }
rPDU2OutletMeteredStatusPeakPowerStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the start date and time that this metered
outlet began recording peak power observations"
::= { rPDU2OutletMeteredStatusEntry 10 }
rPDU2OutletMeteredStatusEnergy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user resettable energy meter measuring Rack PDU load
energy consumption in tenths of kilowatt-hours"
::= { rPDU2OutletMeteredStatusEntry 11 }
rPDU2OutletMeteredStatusReceptacleType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates receptacle type for the outlet."
::= { rPDU2OutletMeteredStatusEntry 12 }
rPDU2OutletMeteredStatusExternalLink OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each RPDU outlet can have its own external web URL link.
This can be configured in the rPDU2OutletMeteredConfigExternalLink OID.
When this link is clicked in the web interface, the linked URL will
open in the web browser."
::= { rPDU2OutletMeteredStatusEntry 13 }
-- rPDU2 Sensor Data
rPDU2Sensor OBJECT IDENTIFIER ::= { rPDU2 10 }
-- rPDU2 Temperature and Humidity Sensor Data
rPDU2SensorTempHumidityTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected temperature-humidity sensors"
::= { rPDU2Sensor 1}
rPDU2SensorTempHumidity OBJECT IDENTIFIER ::= { rPDU2Sensor 2 }
-- rPDU2 Temperature and Humidity Sensor Config
rPDU2SensorTempHumidityConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2SensorTempHumidityConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of temperature-humidity sensor
configuration data"
::= { rPDU2SensorTempHumidity 1 }
rPDU2SensorTempHumidityConfigEntry OBJECT-TYPE
SYNTAX RPDU2SensorTempHumidityConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from temperature-humidity sensor
being queried"
INDEX { rPDU2SensorTempHumidityConfigIndex }
::= { rPDU2SensorTempHumidityConfigTable 1 }
RPDU2SensorTempHumidityConfigEntry ::=
SEQUENCE {
rPDU2SensorTempHumidityConfigIndex INTEGER,
rPDU2SensorTempHumidityConfigModule INTEGER,
rPDU2SensorTempHumidityConfigName DisplayString,
rPDU2SensorTempHumidityConfigNumber INTEGER,
rPDU2SensorTempHumidityConfigTemperatureAlarmEnable INTEGER,
rPDU2SensorTempHumidityConfigHumidityAlarmEnable INTEGER,
rPDU2SensorTempHumidityConfigTempMaxThreshF INTEGER,
rPDU2SensorTempHumidityConfigTempHighThreshF INTEGER,
rPDU2SensorTempHumidityConfigTempHysteresisF INTEGER,
rPDU2SensorTempHumidityConfigTempMaxThreshC INTEGER,
rPDU2SensorTempHumidityConfigTempHighThreshC INTEGER,
rPDU2SensorTempHumidityConfigTempHysteresisC INTEGER,
rPDU2SensorTempHumidityConfigHumidityLowThresh INTEGER,
rPDU2SensorTempHumidityConfigHumidityMinThresh INTEGER,
rPDU2SensorTempHumidityConfigHumidityHysteresis INTEGER,
rPDU2SensorTempHumidityConfigTempPeakReset INTEGER
}
rPDU2SensorTempHumidityConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the temperature-humidity sensor
configuration data table entry"
::= { rPDU2SensorTempHumidityConfigEntry 1 }
rPDU2SensorTempHumidityConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2SensorTempHumidityConfigEntry 2 }
rPDU2SensorTempHumidityConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user-defined temperature-humidity
sensor ID string"
::= { rPDU2SensorTempHumidityConfigEntry 3 }
rPDU2SensorTempHumidityConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature-humidity sensor numeric ID"
::= { rPDU2SensorTempHumidityConfigEntry 4 }
rPDU2SensorTempHumidityConfigTemperatureAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID enables or disables generation
of sensor temperature alarm.
Getting this OID returns the current value of
the temperature alarm enable."
::= { rPDU2SensorTempHumidityConfigEntry 5 }
rPDU2SensorTempHumidityConfigHumidityAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID enables or disables generation
of sensor humidity alarm.
Getting this OID returns the current value of
the humidity alarm enable."
::= { rPDU2SensorTempHumidityConfigEntry 6 }
rPDU2SensorTempHumidityConfigTempMaxThreshF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor maximum temperature alarm threshold in
Fahrenheit. Attempting to set this OID to a
value less than or equal to that of
rPDU2SensorTempHumidityConfigTempHighThreshF
will result in an error."
::= { rPDU2SensorTempHumidityConfigEntry 7 }
rPDU2SensorTempHumidityConfigTempHighThreshF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor high temperature warning alarm threshold
in Fahrenheit. Attempting to set this OID to a
value greater than or equal to that of
rPDU2SensorTempHumidityConfigTempMaxThreshF
will result in an error."
::= { rPDU2SensorTempHumidityConfigEntry 8 }
rPDU2SensorTempHumidityConfigTempHysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor temperature hysteresis setting in Fahrenheit"
::= { rPDU2SensorTempHumidityConfigEntry 9 }
rPDU2SensorTempHumidityConfigTempMaxThreshC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor maximum temperature alarm threshold
in Celsius. Attempting to set this OID to a
value less than or equal to that of
rPDU2SensorTempHumidityConfigTempHighThreshC
will result in an error."
::= { rPDU2SensorTempHumidityConfigEntry 10 }
rPDU2SensorTempHumidityConfigTempHighThreshC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor high temperature warning alarm threshold
in Celsius. Attempting to set this OID to a
value greater than or equal to that of
rPDU2SensorTempHumidityConfigTempMaxThreshC
will result in an error."
::= { rPDU2SensorTempHumidityConfigEntry 11 }
rPDU2SensorTempHumidityConfigTempHysteresisC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor temperature hysteresis setting in Celsius"
::= { rPDU2SensorTempHumidityConfigEntry 12 }
rPDU2SensorTempHumidityConfigHumidityLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor low humidity warning alarm threshold in percent
relative humidity. Attempting to set this OID to a
value less than or equal to that of
rPDU2SensorTempHumidityConfigHumidityMinThresh
will result in an error. Must be between 15% and 90%"
::= { rPDU2SensorTempHumidityConfigEntry 13 }
rPDU2SensorTempHumidityConfigHumidityMinThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor minimum humidity alarm threshold in percent
relative humidity. Attempting to set this OID to a
value greater than or equal to that of
rPDU2SensorTempHumidityConfigHumidityLowThresh
will result in an error. Must be between 15% and 90%"
::= { rPDU2SensorTempHumidityConfigEntry 14 }
rPDU2SensorTempHumidityConfigHumidityHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sensor humidity hysteresis setting in percent relative
humidity"
::= { rPDU2SensorTempHumidityConfigEntry 15 }
rPDU2SensorTempHumidityConfigTempPeakReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the existing peak temperature
to be replaced by the present temperature reading.
Getting this OID will do nothing and return the noOperation(1) value."
::= { rPDU2SensorTempHumidityConfigEntry 16}
-- rPDU2 Temperature and Humidity Sensor Status
rPDU2SensorTempHumidityStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2SensorTempHumidityStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of temperature-humidity sensor status data"
::= { rPDU2SensorTempHumidity 2 }
rPDU2SensorTempHumidityStatusEntry OBJECT-TYPE
SYNTAX RPDU2SensorTempHumidityStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status information from temperature-humidity sensor
being queried"
INDEX { rPDU2SensorTempHumidityStatusIndex }
::= { rPDU2SensorTempHumidityStatusTable 1 }
RPDU2SensorTempHumidityStatusEntry ::=
SEQUENCE {
rPDU2SensorTempHumidityStatusIndex INTEGER,
rPDU2SensorTempHumidityStatusModule INTEGER,
rPDU2SensorTempHumidityStatusName DisplayString,
rPDU2SensorTempHumidityStatusNumber INTEGER,
rPDU2SensorTempHumidityStatusType INTEGER,
rPDU2SensorTempHumidityStatusCommStatus INTEGER,
rPDU2SensorTempHumidityStatusTempF INTEGER,
rPDU2SensorTempHumidityStatusTempC INTEGER,
rPDU2SensorTempHumidityStatusTempStatus INTEGER,
rPDU2SensorTempHumidityStatusRelativeHumidity INTEGER,
rPDU2SensorTempHumidityStatusHumidityStatus INTEGER,
rPDU2SensorTempHumidityStatusTempPeakF INTEGER,
rPDU2SensorTempHumidityStatusTempPeakC INTEGER,
rPDU2SensorTempHumidityStatusTempPeakStartTime DisplayString,
rPDU2SensorTempHumidityStatusTempPeakTimestamp DisplayString
}
rPDU2SensorTempHumidityStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the temperature-humidity
status data table entry"
::= { rPDU2SensorTempHumidityStatusEntry 1 }
rPDU2SensorTempHumidityStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2SensorTempHumidityStatusEntry 2 }
rPDU2SensorTempHumidityStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined temperature-humidity
sensor ID string"
::= { rPDU2SensorTempHumidityStatusEntry 3 }
rPDU2SensorTempHumidityStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature-humidity sensor numeric ID"
::= { rPDU2SensorTempHumidityStatusEntry 4 }
rPDU2SensorTempHumidityStatusType OBJECT-TYPE
SYNTAX INTEGER {
temperatureOnly (1),
temperatureHumidity (2),
commsLost (3),
notInstalled (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the sensor"
::= { rPDU2SensorTempHumidityStatusEntry 5 }
rPDU2SensorTempHumidityStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
commsOK (2),
commsLost (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the sensor"
::= { rPDU2SensorTempHumidityStatusEntry 6 }
rPDU2SensorTempHumidityStatusTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor temperature reading in tenths of degrees Fahrenheit"
::= { rPDU2SensorTempHumidityStatusEntry 7 }
rPDU2SensorTempHumidityStatusTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor temperature reading in tenths of degrees Celsius"
::= { rPDU2SensorTempHumidityStatusEntry 8 }
rPDU2SensorTempHumidityStatusTempStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
belowMin (2),
belowLow (3),
normal (4),
aboveHigh (5),
aboveMax (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID reports the current state of the temperature probe.
A notPresent (1) response indicates that no probe is attached.
A belowMin (2) response indicates that the probe is present and
its measured temperature lies below the minimum threshold.
A belowLow (3) response indicates that the probe is present and
its measured temperature lies below the low threshold.
A normal (4) response indicates that the probe is present
and its measured temperature lies within all temperature thresholds.
An aboveHigh (5) response indicates that the probe is present
and is measuring a temperature above the high threshold.
An aboveMax (6) response indicates that the probe is present
and is measuring a temperature above the max threshold."
::= { rPDU2SensorTempHumidityStatusEntry 9 }
rPDU2SensorTempHumidityStatusRelativeHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor humidity reading in percent relative humidity"
::= { rPDU2SensorTempHumidityStatusEntry 10 }
rPDU2SensorTempHumidityStatusHumidityStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
belowMin (2),
belowLow (3),
normal (4),
aboveHigh (5),
aboveMax (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID reports the current state of the humidity probe.
A notPresent (1) response indicates that no probe is attached.
A belowMin (2) response indicates that the probe is present and
its measured humidity lies below the minimum threshold.
A belowLow (3) response indicates that the probe is present and
its measured humidity lies below the low threshold.
A normal (4) response indicates that the probe is present
and its measured humidity lies within all humidity thresholds.
An aboveHigh (5) response indicates that the probe is present
and is measuring a humidity above the high threshold.
An aboveMax (6) response indicates that the probe is present
and is measuring a humidity above the max threshold."
::= { rPDU2SensorTempHumidityStatusEntry 11 }
rPDU2SensorTempHumidityStatusTempPeakF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor peak temperature in tenths of degrees Fahrenheit"
::= { rPDU2SensorTempHumidityStatusEntry 12 }
rPDU2SensorTempHumidityStatusTempPeakC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor peak temperature in tenths of degrees Celsius"
::= { rPDU2SensorTempHumidityStatusEntry 13 }
rPDU2SensorTempHumidityStatusTempPeakTimestamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time that the peak temperature occurred"
::= { rPDU2SensorTempHumidityStatusEntry 14 }
rPDU2SensorTempHumidityStatusTempPeakStartTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the date and time of the last temperature peak reset"
::= { rPDU2SensorTempHumidityStatusEntry 15 }
-- rPDU2 Discrete Sensor Data
rPDU2SensorDiscreteTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected discrete sensors"
::= { rPDU2Sensor 3}
rPDU2SensorDiscrete OBJECT IDENTIFIER ::= { rPDU2Sensor 4 }
-- rPDU2 Discrete Sensor Config
rPDU2SensorDiscreteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2SensorDiscreteConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of discrete sensor configuration
data"
::= { rPDU2SensorDiscrete 1 }
rPDU2SensorDiscreteConfigEntry OBJECT-TYPE
SYNTAX RPDU2SensorDiscreteConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from discreste sensor
being queried"
INDEX { rPDU2SensorDiscreteConfigIndex }
::= { rPDU2SensorDiscreteConfigTable 1 }
RPDU2SensorDiscreteConfigEntry ::=
SEQUENCE {
rPDU2SensorDiscreteConfigIndex INTEGER,
rPDU2SensorDiscreteConfigModule INTEGER,
rPDU2SensorDiscreteConfigName DisplayString,
rPDU2SensorDiscreteConfigNumber INTEGER,
rPDU2SensorDiscreteConfigNormalState INTEGER,
rPDU2SensorDiscreteConfigAbnormalSeverity INTEGER
}
rPDU2SensorDiscreteConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the discrete sensor configuration
data table entry"
::= { rPDU2SensorDiscreteConfigEntry 1 }
rPDU2SensorDiscreteConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2SensorDiscreteConfigEntry 2 }
rPDU2SensorDiscreteConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user-defined discrete sensor ID string"
::= { rPDU2SensorDiscreteConfigEntry 3 }
rPDU2SensorDiscreteConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The discrete sensor numeric ID"
::= { rPDU2SensorDiscreteConfigEntry 4 }
rPDU2SensorDiscreteConfigNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyOpen (1),
normallyClosed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the normal state of the discrete input
contact"
::= { rPDU2SensorDiscreteConfigEntry 5 }
rPDU2SensorDiscreteConfigAbnormalSeverity OBJECT-TYPE
SYNTAX INTEGER {
informational (1),
warning (2),
critical (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the severity of alarm triggered by
abnormal discrete input contact state"
::= { rPDU2SensorDiscreteConfigEntry 6 }
-- rPDU2 Discrete Sensor Status
rPDU2SensorDiscreteStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2SensorDiscreteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of discrete sensor status data"
::= { rPDU2SensorDiscrete 2 }
rPDU2SensorDiscreteStatusEntry OBJECT-TYPE
SYNTAX RPDU2SensorDiscreteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status information from discrete sensor
being queried"
INDEX { rPDU2SensorDiscreteStatusIndex }
::= { rPDU2SensorDiscreteStatusTable 1 }
RPDU2SensorDiscreteStatusEntry ::=
SEQUENCE {
rPDU2SensorDiscreteStatusIndex INTEGER,
rPDU2SensorDiscreteStatusModule INTEGER,
rPDU2SensorDiscreteStatusName DisplayString,
rPDU2SensorDiscreteStatusNumber INTEGER,
rPDU2SensorDiscreteStatusType INTEGER,
rPDU2SensorDiscreteStatusCommStatus INTEGER,
rPDU2SensorDiscreteStatusCurrentState INTEGER,
rPDU2SensorDiscreteStatusAlarmState INTEGER
}
rPDU2SensorDiscreteStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the discrete sensor status data
table entry"
::= { rPDU2SensorDiscreteStatusEntry 1 }
rPDU2SensorDiscreteStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2SensorDiscreteStatusEntry 2 }
rPDU2SensorDiscreteStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined discrete sensor ID string"
::= { rPDU2SensorDiscreteStatusEntry 3 }
rPDU2SensorDiscreteStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The discrete sensor numeric ID"
::= { rPDU2SensorDiscreteStatusEntry 4 }
rPDU2SensorDiscreteStatusType OBJECT-TYPE
SYNTAX INTEGER {
notConnected (1),
doorContactSensor (2),
smokeSensor (3),
motionDetector (4),
vibrationSensor (5),
dryContactSensor (6),
spotLeakSensor (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of discrete sensor currently being queried"
::= { rPDU2SensorDiscreteStatusEntry 5 }
rPDU2SensorDiscreteStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled(1),
commsOK(2),
commsLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the sensor"
::= { rPDU2SensorDiscreteStatusEntry 6 }
rPDU2SensorDiscreteStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current open/close state of the discrete
sensor"
::= { rPDU2SensorDiscreteStatusEntry 7 }
rPDU2SensorDiscreteStatusAlarmState OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
alarm (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates alarm status of discrete sensor input"
::= { rPDU2SensorDiscreteStatusEntry 8 }
rPDU2Group OBJECT IDENTIFIER ::= { rPDU2 11 }
-- rPDU2 Total Rack PDU Network Port Sharing (NPS) group power and energy
rPDU2GroupNumberOfDevices OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the number of Rack PDU devices contributing
to the Network Port Sharing (NPS) group power and energy values.
Queries to guest units in an NPS group are not applicable and will
return 0."
::= { rPDU2Group 1 }
rPDU2GroupTotalPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the total power consumption of the Rack PDU
Network Port Sharing (NPS) group devices in hundredths of kilowatts.
Queries to guest units in an NPS group are not applicable and will
return 0."
::= { rPDU2Group 2 }
rPDU2GroupTotalEnergy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the total energy consumption of the Rack PDU
Network Port Sharing (NPS) group devices in tenths of kilowatt-hours.
To reset the energy meters for each of the Rack PDU devices that contribute
to this value, see the rPDU2GroupEnergyReset OID.
To view the start time for each of the Rack PDU device energy meters that
contribute to this value, see the rPDU2DeviceStatusEnergyStartTime OID.
Queries to guest units in an NPS group are not applicable and will
return 0."
::= { rPDU2Group 3 }
rPDU2GroupEnergyReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2),
notSupported (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset (2) will cause the device energy meter value
on each device in the Rack PDU Network Port Sharing (NPS) group to be
reset to zero.
Each device in the Rack PDU group will also have its corresponding
rPDU2DeviceStatusEnergyStartTime OID value updated.
Getting this OID in models that support this feature will do nothing
and return the noOperation(1) value.
Models that do not support this feature, as well as guest units in an
NPS group, will respond to this OID with a value of notSupported (3).
Attempts to set this OID in these units will fail."
::= { rPDU2Group 4 }
-- rPDU2 Phase To Phase Status
rPDU2PhaseToPhaseStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected Rack PDU banks"
::= { rPDU2 12}
rPDU2PhaseToPhase OBJECT IDENTIFIER ::= { rPDU2 13 }
rPDU2PhaseToPhaseStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RPDU2PhaseToPhaseStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU phase to phase status data.
This table is only applicable to SKUs that have
phase to phase outputs."
::= { rPDU2PhaseToPhase 1 }
rPDU2PhaseToPhaseStatusEntry OBJECT-TYPE
SYNTAX RPDU2PhaseToPhaseStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status data from currently queried Rack PDU
phase to phase outputs"
INDEX { rPDU2PhaseToPhaseStatusIndex }
::= { rPDU2PhaseToPhaseStatusTable 1 }
RPDU2PhaseToPhaseStatusEntry ::=
SEQUENCE {
rPDU2PhaseToPhaseStatusIndex INTEGER,
rPDU2PhaseToPhaseStatusModule INTEGER,
rPDU2PhaseToPhaseStatusVoltage1to2 INTEGER,
rPDU2PhaseToPhaseStatusVoltage2to3 INTEGER,
rPDU2PhaseToPhaseStatusVoltage3to1 INTEGER
}
rPDU2PhaseToPhaseStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Rack PDU phase to phase status table
entry"
::= { rPDU2PhaseToPhaseStatusEntry 1 }
rPDU2PhaseToPhaseStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { rPDU2PhaseToPhaseStatusEntry 2 }
rPDU2PhaseToPhaseStatusVoltage1to2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Voltage, in Volts, of the Rack
PDU phase 1 to phase 2 output being queried"
::= { rPDU2PhaseToPhaseStatusEntry 3 }
rPDU2PhaseToPhaseStatusVoltage2to3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Voltage, in Volts, of the Rack
PDU phase 2 to phase 3 output being queried"
::= { rPDU2PhaseToPhaseStatusEntry 4 }
rPDU2PhaseToPhaseStatusVoltage3to1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Voltage, in Volts, of the Rack
PDU phase 3 to phase 2 output being queried"
::= { rPDU2PhaseToPhaseStatusEntry 5 }
-- ePDU Ident Table
ePDUDeviceStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Easy PDUs"
::= { ePDU 1 }
ePDUDevice OBJECT IDENTIFIER ::= { ePDU 2 }
-- ePDU Device Status
ePDUDeviceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUDeviceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Easy PDU status information"
::= { ePDUDevice 1 }
ePDUDeviceStatusEntry OBJECT-TYPE
SYNTAX EPDUDeviceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status information from the Easy PDU being queried"
INDEX { ePDUDeviceStatusIndex }
::= { ePDUDeviceStatusTable 1 }
EPDUDeviceStatusEntry ::=
SEQUENCE {
ePDUDeviceStatusIndex INTEGER,
ePDUDeviceStatusModule INTEGER,
ePDUDeviceStatusVersion DisplayString,
ePDUDeviceStatusModelNumber DisplayString,
ePDUDeviceStatusSerialNumber DisplayString,
ePDUDeviceStatusNumPhases INTEGER,
ePDUDeviceStatusActivePower INTEGER,
ePDUDeviceStatusReactivePower INTEGER,
ePDUDeviceStatusApparentPower INTEGER,
ePDUDeviceStatusPowerFactor INTEGER,
ePDUDeviceStatusEnergy INTEGER,
ePDUDeviceStatusFrequency INTEGER
}
ePDUDeviceStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Easy PDU status table entry"
::= { ePDUDeviceStatusEntry 1 }
ePDUDeviceStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Rack PDU numeric ID"
::= { ePDUDeviceStatusEntry 2 }
ePDUDeviceStatusVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Easy PDU firmware and hardware version"
::= { ePDUDeviceStatusEntry 3 }
ePDUDeviceStatusModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Easy PDU model number"
::= { ePDUDeviceStatusEntry 4 }
ePDUDeviceStatusSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Easy PDU serial number"
::= { ePDUDeviceStatusEntry 5 }
ePDUDeviceStatusNumPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of phases present in the Easy PDU"
::= { ePDUDeviceStatusEntry 6 }
ePDUDeviceStatusActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PDU Active Power. Units:1 Watt.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUDeviceStatusEntry 7 }
ePDUDeviceStatusReactivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PDU Reactive Power. Units:1 Var.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUDeviceStatusEntry 8 }
ePDUDeviceStatusApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PDU Apparent Power. Units:1 VA.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUDeviceStatusEntry 9 }
ePDUDeviceStatusPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PDU Power Factor. Units:0.1%.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUDeviceStatusEntry 10 }
ePDUDeviceStatusEnergy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PDU Energy. Units:1 Wh.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUDeviceStatusEntry 11 }
ePDUDeviceStatusFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PDU Frequency. Units:0.001 Hz.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUDeviceStatusEntry 12 }
-- ePDU Device Control
ePDUDeviceControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUDeviceControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Easy PDU control data"
::= { ePDUDevice 2 }
ePDUDeviceControlEntry OBJECT-TYPE
SYNTAX EPDUDeviceControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Control data from Easy PDU being queried"
INDEX { ePDUDeviceControlIndex }
::= { ePDUDeviceControlTable 1 }
EPDUDeviceControlEntry ::=
SEQUENCE {
ePDUDeviceControlIndex INTEGER,
ePDUDeviceControlModule INTEGER,
ePDUDeviceControlReboot INTEGER,
ePDUDeviceControlEngeryReset INTEGER,
ePDUDeviceControlBeepAlarm INTEGER
}
ePDUDeviceControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Easy PDU control table entry"
::= { ePDUDeviceControlEntry 1 }
ePDUDeviceControlModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID"
::= { ePDUDeviceControlEntry 2 }
ePDUDeviceControlReboot OBJECT-TYPE
SYNTAX INTEGER {
noOperation(0),
reboot(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reboot (1) will cause the device reboot immediately.
Getting this OID in models that support this feature will do nothing and
return the noOperation(0) value."
::= { ePDUDeviceControlEntry 3 }
ePDUDeviceControlEngeryReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation(0),
reset(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reboot (1) will cause the device reboot immediately.
Getting this OID in models that support this feature will do nothing and
return the noOperation(0) value."
::= { ePDUDeviceControlEntry 4 }
ePDUDeviceControlBeepAlarm OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Beep alarm, 1 for turn off Beep, 2 for turn on Beep.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUDeviceControlEntry 5 }
-- ePDU Phase Data
ePDUPhaseTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected Easy PDU phases"
::= { ePDU 3 }
ePDUPhase OBJECT IDENTIFIER ::= { ePDU 4 }
-- ePDU2 Phase Config
ePDUPhaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUPhaseConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Easy PDU phase configuration data"
::= { ePDUPhase 1 }
ePDUPhaseConfigEntry OBJECT-TYPE
SYNTAX EPDUPhaseConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from currently queried Easy PDU phase"
INDEX { ePDUPhaseConfigIndex }
::= { ePDUPhaseConfigTable 1 }
EPDUPhaseConfigEntry ::=
SEQUENCE {
ePDUPhaseConfigIndex INTEGER,
ePDUPhaseConfigModule INTEGER,
ePDUPhaseConfigNumber INTEGER,
ePDUPhaseConfigOverVoltageThreshold INTEGER,
ePDUPhaseConfigLowVoltageThreshold INTEGER,
ePDUPhaseConfigOverCurrentThreshold INTEGER,
ePDUPhaseConfigLowCurrentThreshold INTEGER
}
ePDUPhaseConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Easy PDU phase configuration table entry"
::= { ePDUPhaseConfigEntry 1 }
ePDUPhaseConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID"
::= { ePDUPhaseConfigEntry 2 }
ePDUPhaseConfigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric phase ID"
::= { ePDUPhaseConfigEntry 3 }
ePDUPhaseConfigOverVoltageThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Phase Over Voltage alarm threshold. Units:0.1 V.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUPhaseConfigEntry 4 }
ePDUPhaseConfigLowVoltageThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Phase Low Voltage alarm threshold. Units:0.1 V.
Models that do not support this feature will
respond to this OID with a value of -1."
::= { ePDUPhaseConfigEntry 5 }
ePDUPhaseConfigOverCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Phase Over Current alarm threshold. Units:0.01 A.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUPhaseConfigEntry 6 }
ePDUPhaseConfigLowCurrentThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Phase Low Current alarm threshold. Units:0.01 A.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUPhaseConfigEntry 7 }
-- ePDU Phase Status
ePDUPhaseStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUPhaseStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Rack PDU phase status data"
::= { ePDUPhase 2 }
ePDUPhaseStatusEntry OBJECT-TYPE
SYNTAX EPDUPhaseStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status data from currently queried Easy PDU phase"
INDEX { ePDUPhaseStatusIndex }
::= { ePDUPhaseStatusTable 1 }
EPDUPhaseStatusEntry ::=
SEQUENCE {
ePDUPhaseStatusIndex INTEGER,
ePDUPhaseStatusModule INTEGER,
ePDUPhaseStatusNumber INTEGER,
ePDUPhaseStatusVoltage INTEGER,
ePDUPhaseStatusCurrent INTEGER,
ePDUPhaseStatusActivePower INTEGER,
ePDUPhaseStatusReactivePower INTEGER,
ePDUPhaseStatusApparentPower INTEGER,
ePDUPhaseStatusPowerFactor INTEGER,
ePDUPhaseStatusEnergy INTEGER
}
ePDUPhaseStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Easy PDU phase configuration table entry"
::= { ePDUPhaseStatusEntry 1 }
ePDUPhaseStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID"
::= { ePDUPhaseStatusEntry 2 }
ePDUPhaseStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric phase ID"
::= { ePDUPhaseStatusEntry 3 }
ePDUPhaseStatusVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Voltage. Units:0.1 V"
::= { ePDUPhaseStatusEntry 4 }
ePDUPhaseStatusCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Current. Units:0.01 A"
::= { ePDUPhaseStatusEntry 5 }
ePDUPhaseStatusActivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Active Power. Units:1 Watt"
::= { ePDUPhaseStatusEntry 6 }
ePDUPhaseStatusReactivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Reactive Power. Units:1 Var.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUPhaseStatusEntry 7 }
ePDUPhaseStatusApparentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Apparent Power. Units:1 VA.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUPhaseStatusEntry 8 }
ePDUPhaseStatusPowerFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Power Factor. Units:0.1%"
::= { ePDUPhaseStatusEntry 9 }
ePDUPhaseStatusEnergy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Phase Energy. Units:1 Wh"
::= { ePDUPhaseStatusEntry 10 }
-- ePDU Switched Outlet Data
ePDUOutletTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of switched outlets on connected Easy PDUs."
::= { ePDU 5 }
ePDUOutlet OBJECT IDENTIFIER ::= { ePDU 6 }
-- ePDU Switched Outlet Status
ePDUOutletStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The number of switched outlets on connected Rack PDUs"
::= { ePDUOutlet 1 }
ePDUOutletStatusEntry OBJECT-TYPE
SYNTAX EPDUOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switched Outlet status from currently queried
Easy PDU switched outlet"
INDEX { ePDUOutletStatusIndex }
::= { ePDUOutletStatusTable 1 }
EPDUOutletStatusEntry ::=
SEQUENCE {
ePDUOutletStatusIndex INTEGER,
ePDUOutletStatusModule INTEGER,
ePDUOutletStatusNumber INTEGER,
ePDUOutletStatusState INTEGER
}
ePDUOutletStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Easy PDU switched outlet status information table entry.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletStatusEntry 1 }
ePDUOutletStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletStatusEntry 2 }
ePDUOutletStatusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletStatusEntry 3 }
ePDUOutletStatusState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the present switch state of the Easy PDU switched outlet being queried.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletStatusEntry 4 }
-- ePDU Switched Outlet Control
ePDUOutletControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Easy PDU switched outlet control data"
::= { ePDUOutlet 2 }
ePDUOutletControlEntry OBJECT-TYPE
SYNTAX EPDUOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Control data for currently queried Easy PDU switched outlet"
INDEX { ePDUOutletControlIndex }
::= { ePDUOutletControlTable 1 }
EPDUOutletControlEntry ::=
SEQUENCE {
ePDUOutletControlIndex INTEGER,
ePDUOutletControlModule INTEGER,
ePDUOutletControlNumber INTEGER,
ePDUOutletControlCommand INTEGER
}
ePDUOutletControlIndex OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Easy PDU switched outlet configuration table entry.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletControlEntry 1 }
ePDUOutletControlModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletControlEntry 2 }
ePDUOutletControlNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric switched outlet ID.
Models that do not support this feature, will respond to this OID
with a value of notSupported (-1)."
::= { ePDUOutletControlEntry 3 }
ePDUOutletControlCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateOn(1),
immediateOff(2),
outletUnknown(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the immediateOn (1) value will be returned.
If the outlet is off, the immediateOff (2) value will be
returned. If the state of the outlet cannot be
determined, the outletUnknown (3) value will be returned.
If the outletUnknown condition should occur, all devices
powered by the PDU should be shut down. The PDU's power
should then be cycled to clear this condition.
Models that do not support this feature,
will respond to this OID with a value of notSupported (-1).
Setting this variable to immediateOn (1) will immediately turn the outlet on.
Setting this variable to immediateOff (2) will immediately turn the outlet off."
::= { ePDUOutletControlEntry 4 }
-- ePDU Temperature and Humidity Sensor Data
ePDUSensorTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of connected temperature-humidity sensors"
::= { ePDU 7 }
ePDUSensor OBJECT IDENTIFIER ::= { ePDU 8 }
-- ePDU Temperature and Humidity Sensor Config
ePDUSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of temperature-humidity sensor configuration data"
::= { ePDUSensor 1 }
ePDUSensorConfigEntry OBJECT-TYPE
SYNTAX EPDUSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration data from temperature-humidity sensor being queried"
INDEX { ePDUSensorConfigIndex }
::= { ePDUSensorConfigTable 1 }
EPDUSensorConfigEntry ::=
SEQUENCE {
ePDUSensorConfigIndex INTEGER,
ePDUSensorConfigModule INTEGER,
ePDUSensorConfigTempMaxThreshold INTEGER,
ePDUSensorConfigTempMinThreshold INTEGER,
ePDUSensorConfigHumidityMaxThreshold INTEGER,
ePDUSensorConfigHumidityMinThreshold INTEGER
}
ePDUSensorConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the temperature-humidity sensor configuration data table entry"
::= { ePDUSensorConfigEntry 1 }
ePDUSensorConfigModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID"
::= { ePDUSensorConfigEntry 2 }
ePDUSensorConfigTempMaxThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Max Temperature alarm threshold. Units: 0.1 degrees Celsius.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUSensorConfigEntry 3 }
ePDUSensorConfigTempMinThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Min Temperature alarm threshold. Units: 0.1 degrees Celsius.
Models that do not support this feature will
respond to this OID with a value of -1."
::= { ePDUSensorConfigEntry 4 }
ePDUSensorConfigHumidityMaxThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Max Humidity alarm threshold. Units: 0.1% relative humidity.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUSensorConfigEntry 5 }
ePDUSensorConfigHumidityMinThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User-defined Min Humidity alarm threshold. Units: 0.1% relative humidity.
Models that do not support this feature will respond to this OID
with a value of -1."
::= { ePDUSensorConfigEntry 6 }
-- ePDU Temperature and Humidity Sensor Status
ePDUSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EPDUSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of temperature-humidity sensor status data"
::= { ePDUSensor 2 }
ePDUSensorStatusEntry OBJECT-TYPE
SYNTAX EPDUSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status information from temperature-humidity sensor being queried"
INDEX { ePDUSensorStatusIndex }
::= { ePDUSensorStatusTable 1 }
EPDUSensorStatusEntry ::=
SEQUENCE {
ePDUSensorStatusIndex INTEGER,
ePDUSensorStatusModule INTEGER,
ePDUSensorStatusTemperature INTEGER,
ePDUSensorStatusHumidity INTEGER
}
ePDUSensorStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the temperature-humidity status data table entry"
::= { ePDUSensorStatusEntry 1 }
ePDUSensorStatusModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user-defined Easy PDU numeric ID"
::= { ePDUSensorStatusEntry 2 }
ePDUSensorStatusTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor temperature reading in tenths of degrees Celsius."
::= { ePDUSensorStatusEntry 3 }
ePDUSensorStatusHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor humidity reading in 0.1 percent relative humidity."
::= { ePDUSensorStatusEntry 4 }
-- the cooling group
coolingUnit OBJECT IDENTIFIER ::= { cooling 1 }
coolingUnitTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of cooling units accessible via this agent."
::= { coolingUnit 1 }
coolingUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of cooling unit level data."
::= { coolingUnit 2}
coolingUnitEntry OBJECT-TYPE
SYNTAX CoolingUnitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitTable."
INDEX { coolingUnitTableIndex }
::= { coolingUnitTable 1 }
CoolingUnitEntry ::= SEQUENCE {
coolingUnitTableIndex INTEGER
}
coolingUnitTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit reference identifier for this table and all other table entries subordinate to coolingUnits."
::= { coolingUnitEntry 1 }
coolingUnitAbout OBJECT IDENTIFIER ::= { coolingUnit 3 }
coolingUnitAboutTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitAboutTable."
::= { coolingUnitAbout 1 }
coolingUnitAboutTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitAboutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of unit reference information."
::= { coolingUnitAbout 2}
coolingUnitAboutEntry OBJECT-TYPE
SYNTAX CoolingUnitAboutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitAboutTable."
INDEX { coolingUnitTableIndex,
coolingUnitAboutTableIndex }
::= { coolingUnitAboutTable 1 }
CoolingUnitAboutEntry ::= SEQUENCE {
coolingUnitAboutTableIndex INTEGER,
coolingUnitAboutDescription DisplayString,
coolingUnitAboutValue DisplayString
}
coolingUnitAboutTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry."
::= { coolingUnitAboutEntry 1 }
coolingUnitAboutDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in coolingUnitAboutValue."
::= { coolingUnitAboutEntry 2 }
coolingUnitAboutValue OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry."
::= { coolingUnitAboutEntry 3 }
coolingUnitStatus OBJECT IDENTIFIER ::= { coolingUnit 4 }
coolingUnitStatusAnalog OBJECT IDENTIFIER ::= { coolingUnitStatus 1 }
coolingUnitStatusAnalogTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitStatusAnalogTable."
::= { coolingUnitStatusAnalog 1 }
coolingUnitStatusAnalogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitStatusAnalogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of analog unit status data."
::= { coolingUnitStatusAnalog 2}
coolingUnitStatusAnalogEntry OBJECT-TYPE
SYNTAX CoolingUnitStatusAnalogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitStatusAnalogTable."
INDEX { coolingUnitTableIndex,
coolingUnitStatusAnalogTableIndex }
::= { coolingUnitStatusAnalogTable 1 }
CoolingUnitStatusAnalogEntry ::= SEQUENCE {
coolingUnitStatusAnalogTableIndex INTEGER,
coolingUnitStatusAnalogDescription DisplayString,
coolingUnitStatusAnalogValue INTEGER,
coolingUnitStatusAnalogUnits DisplayString,
coolingUnitStatusAnalogScale INTEGER
}
coolingUnitStatusAnalogTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry."
::= { coolingUnitStatusAnalogEntry 1 }
coolingUnitStatusAnalogDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in coolingUnitStatusAnalogValue."
::= { coolingUnitStatusAnalogEntry 2 }
coolingUnitStatusAnalogValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The scaled value of the current table entry (multiplied by coolingUnitStatusAnalogScale for integer presentation)."
::= { coolingUnitStatusAnalogEntry 3 }
coolingUnitStatusAnalogUnits OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit of measure by which coolingUnitStatusAnalogValue is expressed."
::= { coolingUnitStatusAnalogEntry 4 }
coolingUnitStatusAnalogScale OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The factor by which coolingUnitStatusAnalogValue is expressed."
::= { coolingUnitStatusAnalogEntry 5 }
coolingUnitStatusDiscrete OBJECT IDENTIFIER ::= { coolingUnitStatus 2 }
coolingUnitStatusDiscreteTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitStatusDiscreteTable."
::= { coolingUnitStatusDiscrete 1 }
coolingUnitStatusDiscreteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitStatusDiscreteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of discrete unit status data."
::= { coolingUnitStatusDiscrete 2}
coolingUnitStatusDiscreteEntry OBJECT-TYPE
SYNTAX CoolingUnitStatusDiscreteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitStatusDiscreteTable."
INDEX { coolingUnitTableIndex,
coolingUnitStatusDiscreteTableIndex }
::= { coolingUnitStatusDiscreteTable 1 }
CoolingUnitStatusDiscreteEntry ::= SEQUENCE {
coolingUnitStatusDiscreteTableIndex INTEGER,
coolingUnitStatusDiscreteDescription DisplayString,
coolingUnitStatusDiscreteValueAsString DisplayString,
coolingUnitStatusDiscreteValueAsInteger INTEGER,
coolingUnitStatusDiscreteIntegerReferenceKey DisplayString
}
coolingUnitStatusDiscreteTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry."
::= { coolingUnitStatusDiscreteEntry 1 }
coolingUnitStatusDiscreteDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in this table's 'value' OIDs."
::= { coolingUnitStatusDiscreteEntry 2 }
coolingUnitStatusDiscreteValueAsString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry expressed as a string."
::= { coolingUnitStatusDiscreteEntry 3 }
coolingUnitStatusDiscreteValueAsInteger OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry expressed as an integer value."
::= { coolingUnitStatusDiscreteEntry 4 }
coolingUnitStatusDiscreteIntegerReferenceKey OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A complete listing of all possible coolingUnitStatusDiscreteValueAsInteger values paired with their identifying strings."
::= { coolingUnitStatusDiscreteEntry 5 }
coolingUnitConfiguration OBJECT IDENTIFIER ::= { coolingUnit 5 }
coolingUnitConfigurationAnalog OBJECT IDENTIFIER ::= { coolingUnitConfiguration 1 }
coolingUnitConfigurationAnalogTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitConfigurationAnalogTable."
::= { coolingUnitConfigurationAnalog 1 }
coolingUnitConfigurationAnalogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitConfigurationAnalogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of analog unit configuration data."
::= { coolingUnitConfigurationAnalog 2}
coolingUnitConfigurationAnalogEntry OBJECT-TYPE
SYNTAX CoolingUnitConfigurationAnalogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitConfigurationAnalogTable."
INDEX { coolingUnitTableIndex,
coolingUnitConfigurationAnalogTableIndex }
::= { coolingUnitConfigurationAnalogTable 1 }
CoolingUnitConfigurationAnalogEntry ::= SEQUENCE {
coolingUnitConfigurationAnalogTableIndex INTEGER,
coolingUnitConfigurationAnalogDescription DisplayString,
coolingUnitConfigurationAnalogValue INTEGER,
coolingUnitConfigurationAnalogUnits DisplayString,
coolingUnitConfigurationAnalogScale INTEGER,
coolingUnitConfigurationAnalogAccess INTEGER,
coolingUnitConfigurationAnalogMinimum INTEGER,
coolingUnitConfigurationAnalogMaximum INTEGER
}
coolingUnitConfigurationAnalogTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry."
::= { coolingUnitConfigurationAnalogEntry 1 }
coolingUnitConfigurationAnalogDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in coolingUnitConfigurationAnalogValue."
::= { coolingUnitConfigurationAnalogEntry 2 }
coolingUnitConfigurationAnalogValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The scaled value of the current table entry (multiplied by coolingUnitConfigurationAnalogScale for integer presentation)."
::= { coolingUnitConfigurationAnalogEntry 3 }
coolingUnitConfigurationAnalogUnits OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit of measure by which coolingUnitConfigurationAnalogValue is expressed."
::= { coolingUnitConfigurationAnalogEntry 4 }
coolingUnitConfigurationAnalogScale OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The factor by which coolingUnitConfigurationAnalogValue is expressed."
::= { coolingUnitConfigurationAnalogEntry 5 }
coolingUnitConfigurationAnalogAccess OBJECT-TYPE
SYNTAX INTEGER {
readOnly (1),
readWrite (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A description of available access to coolingUnitConfigurationAnalogValue via SNMP client."
::= { coolingUnitConfigurationAnalogEntry 6 }
coolingUnitConfigurationAnalogMinimum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum possible value of coolingUnitConfigurationAnalogValue."
::= { coolingUnitConfigurationAnalogEntry 7 }
coolingUnitConfigurationAnalogMaximum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum possible value of coolingUnitConfigurationAnalogValue."
::= { coolingUnitConfigurationAnalogEntry 8 }
coolingUnitConfigurationDiscrete OBJECT IDENTIFIER ::= { coolingUnitConfiguration 2 }
coolingUnitConfigurationDiscreteTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitConfigurationDiscreteTable."
::= { coolingUnitConfigurationDiscrete 1 }
coolingUnitConfigurationDiscreteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitConfigurationDiscreteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of discrete unit configuration data."
::= { coolingUnitConfigurationDiscrete 2}
coolingUnitConfigurationDiscreteEntry OBJECT-TYPE
SYNTAX CoolingUnitConfigurationDiscreteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitConfigurationDiscreteTable."
INDEX { coolingUnitTableIndex,
coolingUnitConfigurationDiscreteTableIndex }
::= { coolingUnitConfigurationDiscreteTable 1 }
CoolingUnitConfigurationDiscreteEntry ::= SEQUENCE {
coolingUnitConfigurationDiscreteTableIndex INTEGER,
coolingUnitConfigurationDiscreteDescription DisplayString,
coolingUnitConfigurationDiscreteValueAsString DisplayString,
coolingUnitConfigurationDiscreteValueAsInteger INTEGER,
coolingUnitConfigurationDiscreteIntegerReferenceKey DisplayString,
coolingUnitConfigurationDiscreteAccess INTEGER
}
coolingUnitConfigurationDiscreteTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry."
::= { coolingUnitConfigurationDiscreteEntry 1 }
coolingUnitConfigurationDiscreteDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in this table's 'value' OIDs."
::= { coolingUnitConfigurationDiscreteEntry 2 }
coolingUnitConfigurationDiscreteValueAsString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry expressed as a string."
::= { coolingUnitConfigurationDiscreteEntry 3 }
coolingUnitConfigurationDiscreteValueAsInteger OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry expressed as an integer value."
::= { coolingUnitConfigurationDiscreteEntry 4 }
coolingUnitConfigurationDiscreteIntegerReferenceKey OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A complete listing of all possible coolingUnitConfigurationDiscreteValueAsInteger values paired with their identifying strings."
::= { coolingUnitConfigurationDiscreteEntry 5 }
coolingUnitConfigurationDiscreteAccess OBJECT-TYPE
SYNTAX INTEGER {
readOnly (1),
readWrite (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A description of available access to coolingUnitConfigurationDiscreteValueAsInteger via SNMP client."
::= { coolingUnitConfigurationDiscreteEntry 6 }
coolingUnitConfigurationString OBJECT IDENTIFIER ::= { coolingUnitConfiguration 3 }
coolingUnitConfigurationStringTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitConfigurationStringTable."
::= { coolingUnitConfigurationString 1 }
coolingUnitConfigurationStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitConfigurationStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of unit configuration strings."
::= { coolingUnitConfigurationString 2}
coolingUnitConfigurationStringEntry OBJECT-TYPE
SYNTAX CoolingUnitConfigurationStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitConfigurationStringTable."
INDEX { coolingUnitTableIndex,
coolingUnitConfigurationStringTableIndex }
::= { coolingUnitConfigurationStringTable 1 }
CoolingUnitConfigurationStringEntry ::= SEQUENCE {
coolingUnitConfigurationStringTableIndex INTEGER,
coolingUnitConfigurationStringDescription DisplayString,
coolingUnitConfigurationStringValue DisplayString,
coolingUnitConfigurationStringMaxLength INTEGER,
coolingUnitConfigurationStringAccess INTEGER
}
coolingUnitConfigurationStringTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry."
::= { coolingUnitConfigurationStringEntry 1 }
coolingUnitConfigurationStringDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in coolingUnitConfigurationStringValue."
::= { coolingUnitConfigurationStringEntry 2 }
coolingUnitConfigurationStringValue OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry."
::= { coolingUnitConfigurationStringEntry 3 }
coolingUnitConfigurationStringMaxLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum string length supported by coolingUnitConfigurationStringValue."
::= { coolingUnitConfigurationStringEntry 4 }
coolingUnitConfigurationStringAccess OBJECT-TYPE
SYNTAX INTEGER {
readOnly (1),
readWrite (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A description of available access to coolingUnitConfigurationStringValue via SNMP client."
::= { coolingUnitConfigurationStringEntry 5 }
coolingUnitExtended OBJECT IDENTIFIER ::= { coolingUnit 6 }
coolingUnitExtendedAnalog OBJECT IDENTIFIER ::= { coolingUnitExtended 1 }
coolingUnitExtendedAnalogTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitExtendedAnalogTable."
::= { coolingUnitExtendedAnalog 1 }
coolingUnitExtendedAnalogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitExtendedAnalogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of secondary analog data for the cooling unit or one of its components."
::= { coolingUnitExtendedAnalog 2}
coolingUnitExtendedAnalogEntry OBJECT-TYPE
SYNTAX CoolingUnitExtendedAnalogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitExtendedAnalogTable."
INDEX { coolingUnitTableIndex,
coolingUnitExtendedAnalogTableIndex }
::= { coolingUnitExtendedAnalogTable 1 }
CoolingUnitExtendedAnalogEntry ::= SEQUENCE {
coolingUnitExtendedAnalogTableIndex INTEGER,
coolingUnitExtendedAnalogDescription DisplayString,
coolingUnitExtendedAnalogValue INTEGER,
coolingUnitExtendedAnalogUnits DisplayString,
coolingUnitExtendedAnalogScale INTEGER
}
coolingUnitExtendedAnalogTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry. This identifier may reference different table entries in different unit models."
::= { coolingUnitExtendedAnalogEntry 1 }
coolingUnitExtendedAnalogDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in coolingUnitExtendedAnalogValue."
::= { coolingUnitExtendedAnalogEntry 2 }
coolingUnitExtendedAnalogValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The scaled value of the current table entry (multiplied by coolingUnitExtendedAnalogScale for integer presentation)."
::= { coolingUnitExtendedAnalogEntry 3 }
coolingUnitExtendedAnalogUnits OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit of measure by which coolingUnitExtendedAnalogValue is expressed."
::= { coolingUnitExtendedAnalogEntry 4 }
coolingUnitExtendedAnalogScale OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The factor by which coolingUnitExtendedAnalogValue is expressed."
::= { coolingUnitExtendedAnalogEntry 5 }
coolingUnitExtendedDiscrete OBJECT IDENTIFIER ::= { coolingUnitExtended 2 }
coolingUnitExtendedDiscreteTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitExtendedDiscreteTable."
::= { coolingUnitExtendedDiscrete 1 }
coolingUnitExtendedDiscreteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitExtendedDiscreteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of secondary discrete cooling unit data."
::= { coolingUnitExtendedDiscrete 2}
coolingUnitExtendedDiscreteEntry OBJECT-TYPE
SYNTAX CoolingUnitExtendedDiscreteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitExtendedDiscreteTable."
INDEX { coolingUnitTableIndex,
coolingUnitExtendedDiscreteTableIndex }
::= { coolingUnitExtendedDiscreteTable 1 }
CoolingUnitExtendedDiscreteEntry ::= SEQUENCE {
coolingUnitExtendedDiscreteTableIndex INTEGER,
coolingUnitExtendedDiscreteDescription DisplayString,
coolingUnitExtendedDiscreteValueAsString DisplayString,
coolingUnitExtendedDiscreteValueAsInteger INTEGER,
coolingUnitExtendedDiscreteIntegerReferenceKey DisplayString
}
coolingUnitExtendedDiscreteTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry. This identifier may reference different table entries in different unit models."
::= { coolingUnitExtendedDiscreteEntry 1 }
coolingUnitExtendedDiscreteDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in this table's 'value' OIDs."
::= { coolingUnitExtendedDiscreteEntry 2 }
coolingUnitExtendedDiscreteValueAsString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry expressed as a string."
::= { coolingUnitExtendedDiscreteEntry 3 }
coolingUnitExtendedDiscreteValueAsInteger OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry expressed as an integer value."
::= { coolingUnitExtendedDiscreteEntry 4 }
coolingUnitExtendedDiscreteIntegerReferenceKey OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A complete listing of all possible coolingUnitExtendedDiscreteValueAsInteger values paired with their identifying strings."
::= { coolingUnitExtendedDiscreteEntry 5 }
coolingUnitExtendedString OBJECT IDENTIFIER ::= { coolingUnitExtended 3 }
coolingUnitExtendedStringTableSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The potential number of entries available in coolingUnitExtendedStringTable."
::= { coolingUnitExtendedString 1 }
coolingUnitExtendedStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF CoolingUnitExtendedStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of secondary unit reference data."
::= { coolingUnitExtendedString 2}
coolingUnitExtendedStringEntry OBJECT-TYPE
SYNTAX CoolingUnitExtendedStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An element of coolingUnitExtendedStringTable."
INDEX { coolingUnitTableIndex,
coolingUnitExtendedStringTableIndex }
::= { coolingUnitExtendedStringTable 1 }
CoolingUnitExtendedStringEntry ::= SEQUENCE {
coolingUnitExtendedStringTableIndex INTEGER,
coolingUnitExtendedStringDescription DisplayString,
coolingUnitExtendedStringValue DisplayString
}
coolingUnitExtendedStringTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static reference identifier for each table entry. This identifier may reference different table entries in different unit models."
::= { coolingUnitExtendedStringEntry 1 }
coolingUnitExtendedStringDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the information presented in coolingUnitExtendedStringValue."
::= { coolingUnitExtendedStringEntry 2 }
coolingUnitExtendedStringValue OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual value of the current table entry."
::= { coolingUnitExtendedStringEntry 3 }
-- the dm3IdentSystem group
dm3IdentSysDescriptionTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC description records."
::= { dm3IdentSystem 1 }
dm3IdentSysDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3IdentSysDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing description records of the powerplant. The number of
entries is contained in the dm3IdentSysDescriptionTableSize OID."
::= { dm3IdentSystem 2 }
dm3IdentSysDescriptionEntry OBJECT-TYPE
SYNTAX Dm3IdentSysDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The powerplant description record to reference."
INDEX { dm3IdentSysDescriptionIndex }
::= { dm3IdentSysDescriptionTable 1 }
Dm3IdentSysDescriptionEntry ::=
SEQUENCE {
dm3IdentSysDescriptionIndex INTEGER,
dm3IdentSysDescriptionText DisplayString
}
dm3IdentSysDescriptionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant description record."
::= { dm3IdentSysDescriptionEntry 1 }
dm3IdentSysDescriptionText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 16 character text field describing the DC power plant device.
This field can be configured from the dm3ConfigSysDescriptionText OID."
::= { dm3IdentSysDescriptionEntry 2 }
dm3IdentSysModel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Model type of the DC power plant."
::= { dm3IdentSystem 3 }
dm3IdentSysCntrlRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer representation of the hardware revision of the Master Controller board."
::= { dm3IdentSystem 4 }
dm3IdentSysFWVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer representation of the power plant Master Controller firmware revision."
::= { dm3IdentSystem 5 }
-- the dm3ConfigSystem group
dm3ConfigSysDescriptionTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC description records."
::= { dm3ConfigSystem 1 }
dm3ConfigSysDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3ConfigSysDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing description records of the powerplant. The number of
entries is contained in the dm3ConfigSysDescriptionTableSize OID."
::= { dm3ConfigSystem 2 }
dm3ConfigSysDescriptionEntry OBJECT-TYPE
SYNTAX Dm3ConfigSysDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The powerplant description record to reference."
INDEX { dm3ConfigSysDescriptionIndex }
::= { dm3ConfigSysDescriptionTable 1 }
Dm3ConfigSysDescriptionEntry ::=
SEQUENCE {
dm3ConfigSysDescriptionIndex INTEGER,
dm3ConfigSysDescriptionText DisplayString
}
dm3ConfigSysDescriptionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant description record."
::= { dm3ConfigSysDescriptionEntry 1 }
dm3ConfigSysDescriptionText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"16 character text field describing the DC power plant device."
::= { dm3ConfigSysDescriptionEntry 2 }
dm3ConfigSysHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ambient high temperature threshold. Temperature sensor located on Master
Controller board.
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigSystem 3 }
dm3ConfigSysHighTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the System High Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigSystem 4 }
dm3ConfigSysLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ambient low temperature threshold. Temperature sensor located on Master
Controller board.
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigSystem 5 }
dm3ConfigSysLowTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the System Low Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigSystem 6 }
dm3ConfigSysHardwareTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the System Hardware Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigSystem 7 }
dm3ConfigSysRemoteAccess OBJECT-TYPE
SYNTAX INTEGER {
accessEnabled (1),
accessDisabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This OID is used to disable remote write access to the power plant.
Setting this OID to accessEnabled (1) will have no affect.
Setting this OID to accessDisabled (2) will disable the ability to
remotely configure the DC powerplant.
Once remote access is disabled, it can only be restored from the front
panel of the DC power plant."
::= { dm3ConfigSystem 8 }
-- the dm3ConfigLVD group
dm3ConfigLVDTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant LVDs controllable
by this IP address."
::= { dm3ConfigLVD 1 }
dm3ConfigLVDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3ConfigLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the LVDs. The number of
entries is contained in the dm3ConfigLVDTableSize OID."
::= { dm3ConfigLVD 2 }
dm3ConfigLVDEntry OBJECT-TYPE
SYNTAX Dm3ConfigLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The LVD to configure."
INDEX { dm3ConfigLVDIndex }
::= { dm3ConfigLVDTable 1 }
Dm3ConfigLVDEntry ::=
SEQUENCE {
dm3ConfigLVDIndex INTEGER,
dm3ConfigLVDName DisplayString,
dm3ConfigLVDEnable INTEGER,
dm3ConfigLVDTripThresh INTEGER,
dm3ConfigLVDResetThresh INTEGER,
dm3ConfigLVDOpenAlarm INTEGER,
dm3ConfigLVDHWAlarm INTEGER
}
dm3ConfigLVDIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant LVD."
::= { dm3ConfigLVDEntry 1 }
dm3ConfigLVDName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the LVD. The maximum value is 16 characters."
::= { dm3ConfigLVDEntry 2 }
dm3ConfigLVDEnable OBJECT-TYPE
SYNTAX INTEGER {
enabledYes (1),
enabledNo (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID is used to control and indicate if the LVD is on or off.
Setting this OID to enabledYes (1) will enable (turn on) the LVD.
Setting this OID to enabledNo (2) will disable (turn off) the LVD."
::= { dm3ConfigLVDEntry 3 }
dm3ConfigLVDTripThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LVD Trip threshold. If voltage exceeds threshold, the LVD will trip.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigLVDEntry 4 }
dm3ConfigLVDResetThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LVD Reset threshold. If voltage exceeds threshold, the LVD will reset.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigLVDEntry 5 }
dm3ConfigLVDOpenAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the LVD Open Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigLVDEntry 6 }
dm3ConfigLVDHWAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the LVD Hardware Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigLVDEntry 7 }
-- the dm3ConfigBattery group
dm3ConfigBattFloatVolt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery Float Voltage. This setting controls the power plant voltage.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 1 }
dm3ConfigBattMaxRecharge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery Maximum Recharge Rate. This setting controls the battery max
recharge rate. The value is based on C/20 for 240 AHr battery string.
Values are represented in thousandths of Amps (mA).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 2 }
dm3ConfigBattDischargeThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery discharge threshold. If battery output current exceeds threshold
a battery discharge alarm will occur.
Values are represented in thousandths of Amps (mA).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 3 }
dm3ConfigBattDischargeAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery Discharge Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 4 }
dm3ConfigBattHighVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery high voltage threshold. If system battery voltage exceeds threshold
a battery high voltage alarm will occur.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 5 }
dm3ConfigBattHighVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery High Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 6 }
dm3ConfigBattLowVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery low voltage threshold. If system battery voltage is under threshold
a battery low voltage alarm will occur.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 7 }
dm3ConfigBattLowVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery Low Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 8 }
dm3ConfigBattHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery high temperature threshold. If system battery temperature exceeds threshold
a battery high temperature alarm will occur.
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 9 }
dm3ConfigBattHighTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery High Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 10 }
dm3ConfigBattLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery low temperature threshold. If system battery temperature is under threshold
a battery low temperature alarm will occur.
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 11 }
dm3ConfigBattLowTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery Low Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 12 }
dm3ConfigBattAmpHour OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery Amp-Hour Size. Units are thousandths of Amp hours (mAHr).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 13 }
dm3ConfigCompMethod OBJECT-TYPE
SYNTAX INTEGER {
tempcompOn (1),
tempcompOff (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID is used to configure and get the state of the battery
temperature compensation.
Setting this OID to tempcompOn (1) will enable/turn on the battery temperature compensation.
Setting this OID to tempcompOff (2) will disable/turn off the battery temperature compensation."
::= { dm3ConfigBattery 14 }
dm3ConfigCompTempCoeff OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compensation Temperature Coefficient. (uV/degC/cell).
Units are presented in microvolts.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 15 }
dm3ConfigHighKneeTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"High Knee for temperature compensation: Compensation temperature coefficient
becomes 0mV/degC/cell.
Values are represented in thousandths of degrees Celsius.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 16 }
dm3ConfigLowKneeTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Low Knee for temperature compensation: Compensation temperature coefficient
becomes 0mV/degC/cell.
Values are represented in thousandths of degrees Celsius.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigBattery 17 }
dm3ConfigBattHwCurrentAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery Current Hardware Alarm (indicating current is outside realistic
limits, or a possible measurement fault;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 18 }
dm3ConfigBattHwTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Battery Temperature Hardware Alarm (indicating temperature is outside realistic
limits, or a possible measurement fault;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBattery 19 }
-- the dm3ConfigRectThresh group
dm3ConfigRectHighVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Rectifier high voltage threshold. If rectifier voltage exceeds threshold
a rectifier high voltage alarm will occur.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigRectThresh 1 }
dm3ConfigRectLowVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Rectifier low voltage threshold. If rectifier voltage is under threshold
a rectifier low voltage alarm will occur.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigRectThresh 2 }
dm3ConfigRectFailSafe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Rectifier Fail Safe point. This OID represents the value sent to rectifier controllers
to use in the event of communications loss with the Master Controller or Master Controller
board failure.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigRectThresh 3 }
dm3ConfigRectFailComm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Rectifier Communication Fail timeout. This OID represents the time interval in which there is no
communication between the rectifier and the master controller at which the rectifier will reset
all its values to default.
Values are represented in hundredths of Seconds.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigRectThresh 4 }
-- the dm3ConfigRectAlarms group
dm3ConfigRectHighVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier High Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 1 }
dm3ConfigRectLowVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Low Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 2 }
dm3ConfigRectConfigAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This alarm is activated when a new rectifier is detected;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 3 }
dm3ConfigRect1ofNAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting indicates the action if ONE rectifier of a N+1 system has failed;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 4 }
dm3ConfigRect2ofNAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This setting indicates the action if TWO OR MORE rectifiers of a N+1 system have failed;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 5 }
dm3ConfigRectDiagAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Controller Diagnostics Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
::= { dm3ConfigRectAlarms 6 }
dm3ConfigRectImbalanceAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Imbalance Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 7 }
dm3ConfigRectCurrLimitAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Current Limit Alarm (indicating rectifier in the Current Limit state);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
::= { dm3ConfigRectAlarms 8 }
dm3ConfigRectStandbyAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Standby Alarm (indicating output DC has been turned off);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
::= { dm3ConfigRectAlarms 9 }
dm3ConfigRectFanFailAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Fan Fail Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
::= { dm3ConfigRectAlarms 10 }
dm3ConfigRectFailAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Fail Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
::= { dm3ConfigRectAlarms 11 }
dm3ConfigRectHwVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Rectifier Hardware Voltage Alarm (indicating voltage outside realistic limits,
or a possible measurement fault);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigRectAlarms 12 }
-- the dm3ConfigConvThresh group
dm3ConfigConvHighVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter high voltage threshold. If converter voltage exceeds threshold
a converter high voltage alarm will occur.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 1 }
dm3ConfigConvLowVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter low voltage threshold. If converter voltage exceeds threshold
a converter low voltage alarm will occur.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 2 }
dm3ConfigConvFailSafe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter Fail Safe point. This OID represents the value sent to converter controllers
to use in the event of communications loss with the Master Controller or Master Controller
board failure.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 3 }
dm3ConfigConvSetPoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter Set point. This OID represents the initial set point used in the
voltage control loop.
Units are thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 4 }
dm3ConfigConvFailMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter Fail Maximum limit. This OID represents the value sent to the converter
controllers to define the maximum set point allowed.
Units are thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 5 }
dm3ConfigConvFailMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter Fail Minimum limit. This OID represents the value sent to the converter
controllers to define the minimum set point allowed.
Units are thousandths of Volts (mV).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 6 }
dm3ConfigConvFailComm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Converter Communication Fail timeout. This OID represents the time interval in which there is no
communication between the converter and the master controller at which the converter will reset
all its values to default.
Values are represented in hundredths of Seconds.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigConvThresh 7 }
-- the dm3ConfigConvAlarms group
dm3ConfigConvHighVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter High Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigConvAlarms 1 }
dm3ConfigConvLowVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Low Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigConvAlarms 2 }
dm3ConfigConvConfigAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Configuration Alarm (indicating a new converter has been detected);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigConvAlarms 3 }
dm3ConfigConv1ofNAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter 1ofN Alarm (indicating action if ONE converter of a N+1 system has failed);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigConvAlarms 4 }
dm3ConfigConv2ofNAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter 2ofN Alarm (indicating action if TWO OR MORE converters of a N+1 system has failed);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigConvAlarms 5 }
dm3ConfigConvDiagAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Diagnostics Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 6 }
dm3ConfigConvImbalanceAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Imbalance Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 7 }
dm3ConfigConvCurrLimitAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Current Limit Alarm (indicating the converter is in the Current Limit state);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 8 }
dm3ConfigConvStandbyAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Standby Alarm (indicating the converter is in the Standby state);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 9 }
dm3ConfigConvFanFailAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Fan Fail Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 10 }
dm3ConfigConvFailAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Fail Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 11 }
dm3ConfigConvHwVoltAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9),
alarmNofN (10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Converter Voltage Alarm (indicating voltage outside realistic limits, or a
possible measurement fault);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
::= { dm3ConfigConvAlarms 12 }
-- the dm3ConfigOutputRelays group
dm3ConfigOutRlyTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant Output Relays controllable
by this IP address."
::= { dm3ConfigOutputRelays 1 }
dm3ConfigOutRlyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3ConfigOutRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the Output Relays. The number of
entries is contained in the dm3ConfigOutRlyTableSize OID."
::= { dm3ConfigOutputRelays 2 }
dm3ConfigOutRlyEntry OBJECT-TYPE
SYNTAX Dm3ConfigOutRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relay to configure."
INDEX { dm3ConfigOutRlyIndex }
::= { dm3ConfigOutRlyTable 1 }
Dm3ConfigOutRlyEntry ::=
SEQUENCE {
dm3ConfigOutRlyIndex INTEGER,
dm3ConfigOutRlyName DisplayString,
dm3ConfigOutRlyDelay INTEGER,
dm3ConfigOutRlyAlarm INTEGER
}
dm3ConfigOutRlyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant output relay."
::= { dm3ConfigOutRlyEntry 1 }
dm3ConfigOutRlyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the output relay. The maximum value is 16 characters."
::= { dm3ConfigOutRlyEntry 2 }
dm3ConfigOutRlyDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output Relay Delay. This OID represents the time delay from the initiation of an
output relay action to when the output relay action does occur. If the alarm condition
disappears before the end of the delay, no action will occur. Delay for Major
and Minor alarms is not configurable and is always set to 0.
Values are represented in hundredths of seconds.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigOutRlyEntry 3 }
dm3ConfigOutRlyAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output Relay Alarm. This setting indicates what action to perform in the event of
an output relay alarm condition;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Relay Alarm for Major and Minor alarms is not configurable and is always set to
alarmMajor and alarmMinor respectively."
::= { dm3ConfigOutRlyEntry 4 }
-- the dm3ConfigInputRelays group
dm3ConfigInRlyTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant Input Relays controllable
by this IP address."
::= { dm3ConfigInputRelays 1 }
dm3ConfigInRlyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3ConfigInRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the Input Relays. The number of
entries is contained in the dm3ConfigInRlyTableSize OID."
::= { dm3ConfigInputRelays 2 }
dm3ConfigInRlyEntry OBJECT-TYPE
SYNTAX Dm3ConfigInRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input relay to configure."
INDEX { dm3ConfigInRlyIndex }
::= { dm3ConfigInRlyTable 1 }
Dm3ConfigInRlyEntry ::=
SEQUENCE {
dm3ConfigInRlyIndex INTEGER,
dm3ConfigInRlyName DisplayString,
dm3ConfigInRlyDelay INTEGER,
dm3ConfigInRlyAlarm INTEGER
}
dm3ConfigInRlyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant input relay."
::= { dm3ConfigInRlyEntry 1 }
dm3ConfigInRlyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the input relay. The maximum value is 16 characters."
::= { dm3ConfigInRlyEntry 2 }
dm3ConfigInRlyDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input Relay Delay. This OID represents the time delay from the initiation of an
input relay action to when the input relay action does occur. If the alarm condition
disappears before the end of the delay, no action will occur.
Values are represented in hundredths of seconds.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively."
::= { dm3ConfigInRlyEntry 3 }
dm3ConfigInRlyAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input Relay Alarm. This setting indicates what action to perform in the event of
an input relay alarm condition;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigInRlyEntry 4 }
-- the dm3ConfigBreakers group
dm3ConfigBreakersTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant circuit breakers controllable
by this IP address."
::= { dm3ConfigBreakers 1 }
dm3ConfigBreakersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3ConfigBreakersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the circuit breakers. The number of
entries is contained in the dm3ConfigBreakersTableSize OID."
::= { dm3ConfigBreakers 2 }
dm3ConfigBreakersEntry OBJECT-TYPE
SYNTAX Dm3ConfigBreakersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The circuit breaker to configure."
INDEX { dm3ConfigBreakersIndex }
::= { dm3ConfigBreakersTable 1 }
Dm3ConfigBreakersEntry ::=
SEQUENCE {
dm3ConfigBreakersIndex INTEGER,
dm3ConfigBreakersName DisplayString,
dm3ConfigBreakersAlarm INTEGER
}
dm3ConfigBreakersIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant circuit breaker."
::= { dm3ConfigBreakersEntry 1 }
dm3ConfigBreakersName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the circuit breaker. The maximum value is 16 characters."
::= { dm3ConfigBreakersEntry 2 }
dm3ConfigBreakersAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Circuit Breaker Alarm. This setting indicates what action to perform in the event of
a circuit breaker alarm condition;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigBreakersEntry 3 }
-- the dm3ConfigFuses group
dm3ConfigFusesTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant Fuses controllable
by this IP address."
::= { dm3ConfigFuses 1 }
dm3ConfigFusesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3ConfigFusesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the Fuses. The number of
entries is contained in the dm3ConfigFusesTableSize OID."
::= { dm3ConfigFuses 2 }
dm3ConfigFusesEntry OBJECT-TYPE
SYNTAX Dm3ConfigFusesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The fuse to configure."
INDEX { dm3ConfigFusesIndex }
::= { dm3ConfigFusesTable 1 }
Dm3ConfigFusesEntry ::=
SEQUENCE {
dm3ConfigFusesIndex INTEGER,
dm3ConfigFusesName DisplayString,
dm3ConfigFusesAlarm INTEGER
}
dm3ConfigFusesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant fuse."
::= { dm3ConfigFusesEntry 1 }
dm3ConfigFusesName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the fuse. The maximum value is 16 characters."
::= { dm3ConfigFusesEntry 2 }
dm3ConfigFusesAlarm OBJECT-TYPE
SYNTAX INTEGER {
alarmIgnore (1),
alarmRelay1 (2),
alarmRelay2 (3),
alarmRelay3 (4),
alarmRelay4 (5),
alarmRelay5 (6),
alarmRelay6 (7),
alarmMinor (8),
alarmMajor (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Fuses Alarm. This setting indicates what action to perform in the event of
a Fuse alarm condition;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition."
::= { dm3ConfigFusesEntry 3 }
-- the dm3StatusSystem group
dm3StatusSystemTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System temperature based on sensor on Master Controller PCB.
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dm3StatusSystem 1 }
dm3StatusSystemStart OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp at DC powerplant initialization.
The time is represented as MMM,DD,YYYY,HH:MM:SS."
::= { dm3StatusSystem 2 }
dm3StatusSysRemoteAccess OBJECT-TYPE
SYNTAX INTEGER {
accessEnabled (1),
accessDisabled (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote Access indicator
This setting indicates if configuration (write) access to the powerplant is enabled or
disabled at the powerplant level.
This value will be accessEnabled (1) if remote configuration is enabled, and
accessDisabled (2) if remote configuration is disabled."
::= { dm3StatusSystem 3 }
dm3StatusSysSecurityLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable shows the current active security access level of controller. This
can only be changed directly from the front panel."
::= { dm3StatusSystem 4 }
dm3StatusSysTempSanity OBJECT-TYPE
SYNTAX INTEGER{
saneYES (1),
saneNO (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System temperature sanity indicator. Indicates if the system temperature is
reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
indicates temperature is reasonable, a value of saneNo (2) indicates it is not."
::= { dm3StatusSystem 5 }
dm3StatusSysAlarmState OBJECT-TYPE
SYNTAX INTEGER{
alarmMinor (1),
alarmMajor (2),
alarmBoth (3),
alarmNone (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System Alarm State. Reflects the alarm status of the overall DC system.
If a minor alarm is present, the value will be alarmMinor(1).
If a major alarm is present, the value will be alarmMajor(2).
If both minor and a major alarm is present, the value will be alarmBoth(3).
If no alarm is present, the value will be alarmNone(4)."
::= { dm3StatusSystem 6 }
dm3StatusSysTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
in the DC system, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { dm3StatusSystem 7 }
-- the dm3StatusAlarms group
dm3StatusAlarmsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant alarms viewable
by this IP address."
::= { dm3StatusAlarms 1 }
dm3StatusAlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusAlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing system alarms. The number of
entries is contained in the dm3StatusAlarmsTableSize OID."
::= { dm3StatusAlarms 2 }
dm3StatusAlarmsEntry OBJECT-TYPE
SYNTAX Dm3StatusAlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The alarm to display."
INDEX { dm3StatusAlarmsIndex }
::= { dm3StatusAlarmsTable 1 }
Dm3StatusAlarmsEntry ::=
SEQUENCE {
dm3StatusAlarmsIndex INTEGER,
dm3StatusAlarmsText DisplayString
}
dm3StatusAlarmsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the system alarm."
::= { dm3StatusAlarmsEntry 1 }
dm3StatusAlarmsText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 16 character text describing the active alarm condition."
::= { dm3StatusAlarmsEntry 2 }
-- the dm3StatusBattery group
dm3StatusBattCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery Current: This OID shows the battery current in thousandths of Amps (mA)."
::= { dm3StatusBattery 1 }
dm3StatusBattTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery Temperature:
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dm3StatusBattery 2 }
dm3StatusBattCurrentSanity OBJECT-TYPE
SYNTAX INTEGER{
saneYES (1),
saneNO (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery current sanity indicator. Indicates if the battery current is
reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
indicates current is reasonable, a value of saneNo (2) indicates it is not."
::= { dm3StatusBattery 3 }
dm3StatusBattTempSanity OBJECT-TYPE
SYNTAX INTEGER{
saneYES (1),
saneNO (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery temperature sanity indicator. Indicates if the battery temperature is
reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
indicates temperature is reasonable, a value of saneNo (2) indicates it is not."
::= { dm3StatusBattery 4 }
-- the dm3StatusOEM group
dm3StatusOEMrectOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier offset value in thousandths of Volts (mV)."
::= { dm3StatusOEM 1 }
dm3StatusOEMrectGain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier gain value in thousandths of Volts (mV/V)."
::= { dm3StatusOEM 2 }
dm3StatusOEMconvOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter offset value in thousandths of Volts (mV)."
::= { dm3StatusOEM 3 }
dm3StatusOEMconvGain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter gain value in thousandths of Volts (mV/V)."
::= { dm3StatusOEM 4 }
dm3StatusOEMshuntOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the shunt offset value in thousandths of Amps (mA)."
::= { dm3StatusOEM 5 }
dm3StatusOEMshuntGain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the shunt gain value in thousandths of Amps (mA/A)."
::= { dm3StatusOEM 6 }
-- the dm3StatusLVD group
dm3StatusLVDTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant LVDs viewable
by this IP address."
::= { dm3StatusLVD 1 }
dm3StatusLVDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the LVDs. The number of
entries is contained in the dm3StatusLVDTableSize OID."
::= { dm3StatusLVD 2 }
dm3StatusLVDEntry OBJECT-TYPE
SYNTAX Dm3StatusLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The LVD to gather status from."
INDEX { dm3StatusLVDIndex }
::= { dm3StatusLVDTable 1 }
Dm3StatusLVDEntry ::=
SEQUENCE {
dm3StatusLVDIndex INTEGER,
dm3StatusLVDName DisplayString,
dm3StatusLVDState INTEGER,
dm3StatusLVDHwFault INTEGER
}
dm3StatusLVDIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant LVD."
::= { dm3StatusLVDEntry 1 }
dm3StatusLVDName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the LVD. The maximum size is
16 characters. The name is set by using the
dm3ConfigLVDName OID.
This OID is provided for informational purposes only."
::= { dm3StatusLVDEntry 2 }
dm3StatusLVDState OBJECT-TYPE
SYNTAX INTEGER {
statusClosed (1),
statusOpened (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusClosed (1) if the LVD is closed.
statusOpened (2) will be returned if the LVD is opened."
::= { dm3StatusLVDEntry 3 }
dm3StatusLVDHwFault OBJECT-TYPE
SYNTAX INTEGER {
statusFault (1),
statusNofault (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusFault (1) if the LVD is faulted.
statusNofault (2) will be returned if the LVD is not faulted."
::= { dm3StatusLVDEntry 4 }
-- the dm3StatusRectifier group
dm3StatusRectTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant rectifiers viewable
by this IP address."
::= { dm3StatusRectifier 1 }
dm3StatusRectTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusRectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the rectifiers. The number of
entries is contained in the dm3StatusRectTableSize OID."
::= { dm3StatusRectifier 2 }
dm3StatusRectEntry OBJECT-TYPE
SYNTAX Dm3StatusRectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The rectifier to gather status from."
INDEX { dm3StatusRectIndex }
::= { dm3StatusRectTable 1 }
Dm3StatusRectEntry ::=
SEQUENCE {
dm3StatusRectIndex INTEGER,
dm3StatusRectID INTEGER,
dm3StatusRectDesc DisplayString,
dm3StatusRectCurrent INTEGER,
dm3StatusRectCurrentLimit INTEGER,
dm3StatusRectStandby INTEGER,
dm3StatusRectFanFail INTEGER,
dm3StatusRectFail INTEGER,
dm3StatusRectDevType INTEGER,
dm3StatusRectPhyAddr INTEGER,
dm3StatusRectCfg INTEGER,
dm3StatusRectPcbRev INTEGER,
dm3StatusRectFwVer INTEGER,
dm3StatusRectPresent INTEGER,
dm3StatusRectDiagPass INTEGER,
dm3StatusRectState INTEGER
}
dm3StatusRectIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant rectifier."
::= { dm3StatusRectEntry 1 }
dm3StatusRectID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier ID. This enumerates the number of the rectifier within
a group of rectifiers."
::= { dm3StatusRectEntry 2 }
dm3StatusRectDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the 16-character rectifier description."
::= { dm3StatusRectEntry 3 }
dm3StatusRectCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier current in thousandths of Amps (mA)."
::= { dm3StatusRectEntry 4 }
dm3StatusRectCurrentLimit OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier is in the Current Limit state.
statusFalse (2) will be returned if the rectifier is not in the Current Limit state."
::= { dm3StatusRectEntry 5 }
dm3StatusRectStandby OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier is in the Standby state.
statusFalse (2) will be returned if the rectifier is not in the Standby state."
::= { dm3StatusRectEntry 6 }
dm3StatusRectFanFail OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier Fan has failed.
statusFalse (2) will be returned if the rectifier Fan has not failed."
::= { dm3StatusRectEntry 7 }
dm3StatusRectFail OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier has failed.
statusFalse (2) will be returned if the rectifier has not failed."
::= { dm3StatusRectEntry 8 }
dm3StatusRectDevType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier device type."
::= { dm3StatusRectEntry 9 }
dm3StatusRectPhyAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier physical address (the address on the bus)."
::= { dm3StatusRectEntry 10 }
dm3StatusRectCfg OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier is present after
power-up or set-configuration.
statusFalse (2) will be returned if the rectifier is not configured."
::= { dm3StatusRectEntry 11 }
dm3StatusRectPcbRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier device PCB serial number."
::= { dm3StatusRectEntry 12 }
dm3StatusRectFwVer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier device firmware revision."
::= { dm3StatusRectEntry 13 }
dm3StatusRectPresent OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier is present.
statusFalse (2) will be returned if the rectifier is not present."
::= { dm3StatusRectEntry 14 }
dm3StatusRectDiagPass OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier diagnostics have passed.
statusFalse (2) will be returned if the rectifier diagnostics have not passed."
::= { dm3StatusRectEntry 15 }
dm3StatusRectState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier device state as defined by the device status register."
::= { dm3StatusRectEntry 16 }
dm3StatusSysRectVoltSanity OBJECT-TYPE
SYNTAX INTEGER {
saneYES (1),
saneNO (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rectifier voltage sanity indicator. Indicates if the rectifier voltage is
reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
indicates voltage is reasonable, a value of saneNo (2) indicates it is not."
::= { dm3StatusRectifier 3 }
dm3StatusSysRectAvailable OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier is available.
statusFalse (2) will be returned if the rectifier is not available."
::= { dm3StatusRectifier 4 }
dm3StatusSysRectType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the type of rectifier the system has. There can only be a single type of
rectifier in the power plant"
::= { dm3StatusRectifier 5 }
dm3StatusSysRectVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the system level rectifier voltage in thousandths of Volts (mV)."
::= { dm3StatusRectifier 6 }
dm3StatusSysRectCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the system level rectifier current in thousandths of Amps (mA)."
::= { dm3StatusRectifier 7 }
-- the dm3StatusConverter group
dm3StatusConvTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant converters viewable
by this IP address."
::= { dm3StatusConverter 1 }
dm3StatusConvTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusConvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for viewing status of the converters. The number of
entries is contained in the dm3StatusConvTableSize OID."
::= { dm3StatusConverter 2 }
dm3StatusConvEntry OBJECT-TYPE
SYNTAX Dm3StatusConvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The converter to gather status from."
INDEX { dm3StatusConvIndex }
::= { dm3StatusConvTable 1 }
Dm3StatusConvEntry ::=
SEQUENCE {
dm3StatusConvIndex INTEGER,
dm3StatusConvID INTEGER,
dm3StatusConvDesc DisplayString,
dm3StatusConvCurrent INTEGER,
dm3StatusConvCurrentLimit INTEGER,
dm3StatusConvStandby INTEGER,
dm3StatusConvFanFail INTEGER,
dm3StatusConvFail INTEGER,
dm3StatusConvDevType INTEGER,
dm3StatusConvPhyAddr INTEGER,
dm3StatusConvCfg INTEGER,
dm3StatusConvPcbRev INTEGER,
dm3StatusConvFwVer INTEGER,
dm3StatusConvPresent INTEGER,
dm3StatusConvDiagPass INTEGER,
dm3StatusConvState INTEGER
}
dm3StatusConvIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant converter."
::= { dm3StatusConvEntry 1 }
dm3StatusConvID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter ID. This enumerates the number of the converter within
a group of converters."
::= { dm3StatusConvEntry 2 }
dm3StatusConvDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the 16 character converter description."
::= { dm3StatusConvEntry 3 }
dm3StatusConvCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter current in thousandths of Amps (mA)."
::= { dm3StatusConvEntry 4 }
dm3StatusConvCurrentLimit OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter is in the Current Limit state.
statusFalse (2) will be returned if the converter is not in the Current Limit state."
::= { dm3StatusConvEntry 5 }
dm3StatusConvStandby OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter is in the Standby state.
statusFalse (2) will be returned if the converter is not in the Standby state."
::= { dm3StatusConvEntry 6 }
dm3StatusConvFanFail OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter Fan has failed.
statusFalse (2) will be returned if the converter Fan has not failed."
::= { dm3StatusConvEntry 7 }
dm3StatusConvFail OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter has failed.
statusFalse (2) will be returned if the converter has not failed."
::= { dm3StatusConvEntry 8 }
dm3StatusConvDevType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter device type."
::= { dm3StatusConvEntry 9 }
dm3StatusConvPhyAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter physical address (the address on the bus)."
::= { dm3StatusConvEntry 10 }
dm3StatusConvCfg OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter is present after
power-up or set-configuration.
statusFalse (2) will be returned if the converter is not configured."
::= { dm3StatusConvEntry 11 }
dm3StatusConvPcbRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter device PCB serial number."
::= { dm3StatusConvEntry 12 }
dm3StatusConvFwVer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter device firmware version."
::= { dm3StatusConvEntry 13 }
dm3StatusConvPresent OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter is present.
statusFalse (2) will be returned if the converter is not present."
::= { dm3StatusConvEntry 14 }
dm3StatusConvDiagPass OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter diagnostics have passed.
statusFalse (2) will be returned if the converter diagnostics have not passed."
::= { dm3StatusConvEntry 15 }
dm3StatusConvState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter state as defined by the device status register."
::= { dm3StatusConvEntry 16 }
dm3StatusSysConvVoltSanity OBJECT-TYPE
SYNTAX INTEGER{
saneYES (1),
saneNO (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Converter voltage sanity indicator. Indicates if the converter voltage is
reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
indicates voltage is reasonable, a value of saneNo (2) indicates it is not."
::= { dm3StatusConverter 3 }
dm3StatusSysConvAvailable OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the converter is available.
statusFalse (2) will be returned if the converter is not available."
::= { dm3StatusConverter 4 }
dm3StatusSysConvType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the converter type."
::= { dm3StatusConverter 5 }
dm3StatusSysConvVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the system level converter voltage in thousandths of volts (mV)."
::= { dm3StatusConverter 6 }
dm3StatusSysConvCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the system level converter current in thousandths of Amps (mA)."
::= { dm3StatusConverter 7 }
-- the dm3StatusOutputRelays group
dm3StatusOutRlyTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant output relays viewable
by this IP address."
::= { dm3StatusOutputRelays 1 }
dm3StatusOutRlyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusOutRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for viewing status of the output relays. The number of
entries is contained in the dm3StatusOutRlyTableSize OID."
::= { dm3StatusOutputRelays 2 }
dm3StatusOutRlyEntry OBJECT-TYPE
SYNTAX Dm3StatusOutRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relay to gather status from."
INDEX { dm3StatusOutRlyIndex }
::= { dm3StatusOutRlyTable 1 }
Dm3StatusOutRlyEntry ::=
SEQUENCE {
dm3StatusOutRlyIndex INTEGER,
dm3StatusOutRlyName DisplayString,
dm3StatusOutRlyStatus INTEGER
}
dm3StatusOutRlyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant output relay."
::= { dm3StatusOutRlyEntry 1 }
dm3StatusOutRlyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the output relay. The maximum size is
16 characters. The name is set by using the
dm3ConfigOutRlyName OID.
This OID is provided for informational purposes only."
::= { dm3StatusOutRlyEntry 2 }
dm3StatusOutRlyStatus OBJECT-TYPE
SYNTAX INTEGER {
statusOn (1),
statusOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusOn (1) if the output relay is enabled/on.
statusOff (2) will be returned if the output relay is disabled/off."
::= { dm3StatusOutRlyEntry 3 }
-- the dm3StatusInputRelays group
dm3StatusInRlyTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant input relays viewable
by this IP address."
::= { dm3StatusInputRelays 1 }
dm3StatusInRlyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusInRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for viewing status of the input relays. The number of
entries is contained in the dm3StatusInRlyTableSize OID."
::= { dm3StatusInputRelays 2 }
dm3StatusInRlyEntry OBJECT-TYPE
SYNTAX Dm3StatusInRlyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input relays to gather status from."
INDEX { dm3StatusInRlyIndex }
::= { dm3StatusInRlyTable 1 }
Dm3StatusInRlyEntry ::=
SEQUENCE {
dm3StatusInRlyIndex INTEGER,
dm3StatusInRlyName DisplayString,
dm3StatusInRlyStatus INTEGER
}
dm3StatusInRlyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant input relay."
::= { dm3StatusInRlyEntry 1 }
dm3StatusInRlyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the input relay. The maximum size is
16 characters. The name is set by using the
dm3ConfigInRlyName OID.
This OID is provided for informational purposes only."
::= { dm3StatusInRlyEntry 2 }
dm3StatusInRlyStatus OBJECT-TYPE
SYNTAX INTEGER {
statusOn (1),
statusOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusOn (1) if the input relay is enabled/on.
statusOff (2) will be returned if the input relay is disabled/off."
::= { dm3StatusInRlyEntry 3 }
-- the dm3StatusBreakers group
dm3StatusBreakersTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant circuit breakers viewable
by this IP address."
::= { dm3StatusBreakers 1 }
dm3StatusBreakersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusBreakersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for viewing status of the circuit breakers. The number of
entries is contained in the dm3StatusBreakersTableSize OID."
::= { dm3StatusBreakers 2 }
dm3StatusBreakersEntry OBJECT-TYPE
SYNTAX Dm3StatusBreakersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The circuit breaker to gather status from."
INDEX { dm3StatusBreakersIndex }
::= { dm3StatusBreakersTable 1 }
Dm3StatusBreakersEntry ::=
SEQUENCE {
dm3StatusBreakersIndex INTEGER,
dm3StatusBreakersName DisplayString,
dm3StatusBreakersStatus INTEGER
}
dm3StatusBreakersIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant circuit breaker."
::= { dm3StatusBreakersEntry 1 }
dm3StatusBreakersName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the circuit breaker. The maximum size is
16 characters. The name is set by using the
dm3ConfigBreakersName OID.
This OID is provided for informational purposes only."
::= { dm3StatusBreakersEntry 2 }
dm3StatusBreakersStatus OBJECT-TYPE
SYNTAX INTEGER {
statusClosed (1),
statusOpen (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusClosed (1) if the circuit breaker is closed.
statusOpen (2) will be returned if the circuit breaker is open."
::= { dm3StatusBreakersEntry 3 }
-- the dm3StatusFuses group
dm3StatusFusesTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant fuses controllable
by this IP address."
::= { dm3StatusFuses 1 }
dm3StatusFusesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dm3StatusFusesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for viewing status of the fuses. The number of
entries is contained in the dm3StatusFusesTableSize OID."
::= { dm3StatusFuses 2 }
dm3StatusFusesEntry OBJECT-TYPE
SYNTAX Dm3StatusFusesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The fuse to gather status from."
INDEX { dm3StatusFusesIndex }
::= { dm3StatusFusesTable 1 }
Dm3StatusFusesEntry ::=
SEQUENCE {
dm3StatusFusesIndex INTEGER,
dm3StatusFusesName DisplayString,
dm3StatusFusesStatus INTEGER
}
dm3StatusFusesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant fuse."
::= { dm3StatusFusesEntry 1 }
dm3StatusFusesName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the fuse. The maximum size is
16 characters. The name is set by using the
dm3ConfigFuseName OID.
This OID is provided for informational purposes only."
::= { dm3StatusFusesEntry 2 }
dm3StatusFusesStatus OBJECT-TYPE
SYNTAX INTEGER {
statusClosed (1),
statusOpen (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusClosed (1) if the fuse is closed.
statusOpen (2) will be returned if the fuse is open."
::= { dm3StatusFusesEntry 3 }
-- the atsIdent group
atsIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Automatic Transfer Switch.
This value is set at the factory."
::= { atsIdent 1 }
atsIdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string identifying the Automatic Transfer Switch
firmware revision."
::= { atsIdent 2 }
atsIdentFirmwareDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of release for this Automatic Transfer Switch
firmware revision. "
::= { atsIdent 3 }
atsIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the Automatic Transfer Switch was manufactured in mm/dd/yyyy format.
This value is set at the factory. "
::= { atsIdent 4 }
atsIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string identifying the model number of the Automatic Transfer Switch.
This value is set at the factory."
::= { atsIdent 5 }
atsIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string identifying the serial number of
the Automatic Transfer Switch. This value is set at the factory."
::= { atsIdent 6 }
atsIdentNominalLineVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RMS Utility Voltage measured in Volts."
::= { atsIdent 7 }
atsIdentNominalLineFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Utility Power Frequency measured in Hertz."
::= { atsIdent 8 }
atsIdentDeviceRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the device rating in Amps"
::= { atsIdent 9 }
-- the atsCalibration group
-- Input Voltage Calibration Factor table
atsCalibrationNumInputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of inputs to this device."
::= { atsCalibrationInput 1 }
atsCalibrationNumInputPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of phases per input for this device."
::= { atsCalibrationInput 2 }
atsCalibrationInputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATSCalibrationInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The number of phases per input line to this device."
::= { atsCalibrationInput 3 }
atsCalibrationInputPhaseEntry OBJECT-TYPE
SYNTAX ATSCalibrationInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing calibration information applicable to a
particular input phase."
INDEX { atsCalibrationInputTableIndex, atsCalibrationInputPhaseTableIndex }
::= { atsCalibrationInputPhaseTable 1 }
ATSCalibrationInputPhaseEntry ::= SEQUENCE {
atsCalibrationInputTableIndex INTEGER,
atsCalibrationInputPhaseTableIndex INTEGER,
atsLineVoltageCalibrationFactor INTEGER
}
atsCalibrationInputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { atsCalibrationInputPhaseEntry 1 }
atsCalibrationInputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input phase identifier."
::= { atsCalibrationInputPhaseEntry 2 }
atsLineVoltageCalibrationFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Line Voltage Calibration factor.
This value is set at the factory."
::= { atsCalibrationInputPhaseEntry 3 }
-- Power Supply Voltage Calibration table
atsCalibrationPowerSupplyVoltages OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of power supply voltages supported by this device.
This variable indicates the number of rows in the
atsCalibrationPowerSupplyTable."
::= { atsCalibrationPowerSupply 1 }
atsCalibrationPowerSupplyVoltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATSCalibrationPowerSupplyVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Power Supply table entries."
::= { atsCalibrationPowerSupply 2 }
atsCalibrationPowerSupplyVoltageEntry OBJECT-TYPE
SYNTAX ATSCalibrationPowerSupplyVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular Power Supply Voltage."
INDEX { atsCalibrationPowerSupplyVoltageTableIndex }
::= { atsCalibrationPowerSupplyVoltageTable 1 }
ATSCalibrationPowerSupplyVoltageEntry ::= SEQUENCE {
atsCalibrationPowerSupplyVoltageTableIndex INTEGER,
atsCalibrationPowerSupplyVoltage INTEGER,
atsPowerSupplyVoltageCalibrationFactor INTEGER
}
atsCalibrationPowerSupplyVoltageTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power supply voltage identifier."
::= { atsCalibrationPowerSupplyVoltageEntry 1 }
atsCalibrationPowerSupplyVoltage OBJECT-TYPE
SYNTAX INTEGER {
powerSupply24V(1),
powerSupply12V(2),
powerSupply(3),
powerSupply24VSourceB(4),
powerSupplyMinus12V(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value describes the power supply voltage of
24V Source A, 24V Source B, +12V, -12V and 5V."
::= { atsCalibrationPowerSupplyVoltageEntry 2 }
atsPowerSupplyVoltageCalibrationFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Line Voltage Calibration factor.
This value is set at the factory."
::= { atsCalibrationPowerSupplyVoltageEntry 3 }
-- ATS4G Power Supply Calibration
ats4gCalibrationPowerSupplyVoltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATS4GCalibrationPowerSupplyVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Power Supply table entries. It is not applicable to
AP77xx ATS units."
::= { atsCalibrationPowerSupply 3 }
ats4gCalibrationPowerSupplyVoltageEntry OBJECT-TYPE
SYNTAX ATS4GCalibrationPowerSupplyVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular Power Supply Voltage. It is not applicable to
AP77xx ATS units."
INDEX { ats4gCalibrationPowerSupplyVoltageTableIndex }
::= { ats4gCalibrationPowerSupplyVoltageTable 1 }
ATS4GCalibrationPowerSupplyVoltageEntry ::= SEQUENCE {
ats4gCalibrationPowerSupplyVoltageTableIndex INTEGER,
ats4gCalibrationPowerSupplyVoltage INTEGER,
ats4gPowerSupplyVoltageCalibrationFactor INTEGER
}
ats4gCalibrationPowerSupplyVoltageTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power supply voltage identifier. It is not applicable to
AP77xx ATS units."
::= { ats4gCalibrationPowerSupplyVoltageEntry 1 }
ats4gCalibrationPowerSupplyVoltage OBJECT-TYPE
SYNTAX INTEGER {
powerSupply24VA(1),
powerSupply24VB(2),
powerSupplyVBoostA(3),
powerSupplyVBoostB(4),
powerSupply3Dot3V(5),
powerSupply1Dot0V(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value describes the power supply voltage of
24V Source A, 24V Source B, VBoost Source A, VBoost Source B, 3.3V, 1.0V.
It is not applicable to AP77xx ATS units."
::= { ats4gCalibrationPowerSupplyVoltageEntry 2 }
ats4gPowerSupplyVoltageCalibrationFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Line Voltage Calibration factor. This value is set at the factory.
It is not applicable to AP77xx ATS units."
::= { ats4gCalibrationPowerSupplyVoltageEntry 3 }
-- Output Current Calibration table
atsCalibrationNumOutputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output lines from this device.
This variable indicates the number of rows in the
atsCalibrationOutputTable."
::= { atsCalibrationOutput 1 }
atsCalibrationNumOutputPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output phases utilized in this
device."
::= { atsCalibrationOutput 2 }
atsCalibrationOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATSCalibrationOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries."
::= { atsCalibrationOutput 3 }
atsCalibrationOutputEntry OBJECT-TYPE
SYNTAX ATSCalibrationOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { atsCalibrationOutputTableIndex, atsCalibrationOutputPhasesTableIndex }
::= { atsCalibrationOutputTable 1 }
ATSCalibrationOutputEntry ::= SEQUENCE {
atsCalibrationOutputTableIndex INTEGER,
atsCalibrationOutputPhasesTableIndex INTEGER,
atsOutputCurrentCalibrationFactor INTEGER
}
atsCalibrationOutputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { atsCalibrationOutputEntry 1 }
atsCalibrationOutputPhasesTableIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3),
neutral(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each calibration factor for each
output phase utilized in this device and one for neutral. "
::= { atsCalibrationOutputEntry 2 }
atsOutputCurrentCalibrationFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current calibration factor measured in Amps."
::= { atsCalibrationOutputEntry 3 }
-- Exp Begin
-- ATS4G output current calibration
ats4gCalibrationOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATS4GCalibrationOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. It is not applicable to
AP77xx ATS units."
::= { atsCalibrationOutput 4 }
ats4gCalibrationOutputEntry OBJECT-TYPE
SYNTAX ATS4GCalibrationOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { ats4gCalibrationOutputTableIndex, ats4gCalibrationOutputPhasesTableIndex}
::= { ats4gCalibrationOutputTable 1 }
ATS4GCalibrationOutputEntry ::= SEQUENCE {
ats4gCalibrationOutputTableIndex INTEGER,
ats4gCalibrationOutputPhasesTableIndex INTEGER,
ats4gOutputCurrentCalibrationFactor INTEGER
}
ats4gCalibrationOutputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { ats4gCalibrationOutputEntry 1 }
ats4gCalibrationOutputPhasesTableIndex OBJECT-TYPE
SYNTAX INTEGER{
sourceALine(1),
sourneBLine(2),
bank1(3),
bank2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each calibration factor for each output phase utilized
in this device and one for neutral. Bank 1 and Bank 2 are for units
with two circuit breakers. It is not applicable to AP77xx ATS units."
::= { ats4gCalibrationOutputEntry 2 }
ats4gOutputCurrentCalibrationFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current calibration factor measured in Amps.
It is not applicable to AP7xxx ATS units."
::= { ats4gCalibrationOutputEntry 3 }
-- Exp End
-- the atsControl group
atsControlResetATS OBJECT-TYPE
SYNTAX INTEGER {
none(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable will cause the Automatic Transfer Switch to
perform a power-on reset. It is not applicable to AP44xx units."
::= { atsControl 1 }
atsControlClearAllAlarms OBJECT-TYPE
SYNTAX INTEGER {
none(1),
clear(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable will clear all alarms in the Automatic Transfer Switch.
Returns (-1) if unsupported."
::= { atsControl 2 }
-- the atsConfig group
atsConfigProductName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A configurable character string."
::= { atsConfig 1 }
atsConfigPreferredSource OBJECT-TYPE
SYNTAX INTEGER {
sourceA(1),
sourceB(2),
none(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable returns the preferred source of power when both sources are OK."
::= { atsConfig 2 }
atsConfigFrontPanelLockout OBJECT-TYPE
SYNTAX INTEGER {
disableFrontPanel(1),
enableFrontPanel(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this variable to disableFrontPanel(1), prevents source
preference configuration of the Automatic Transfer Switch via the
Front Panel.
Setting this variable to enableFrontPanel(2)allows, source preference
configuration of the Automatic Transfer Switch via the Front Panel."
::= { atsConfig 3 }
atsConfigVoltageSensitivity OBJECT-TYPE
SYNTAX INTEGER {
high(1),
low(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the sensitivity to changes in voltage:
high(1) for best protection, low(2) for frequent small line
voltage changes."
::= { atsConfig 4 }
atsConfigTransferVoltageRange OBJECT-TYPE
SYNTAX INTEGER {
wide(1),
medium(2),
narrow(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the range of acceptable voltage from a power source.
If the voltage measured from the selected input source is not within this
range, the Automatic Transfer Switch will switch over (transfer) to the
alternate power source."
::= { atsConfig 5 }
atsConfigCurrentLimit OBJECT-TYPE
SYNTAX INTEGER (0..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold (in Amps) at which an Over Current Alarm will be generated.
This OID returns the overload threshold value of the
OID atsConfigPhaseOverLoadThreshold for the 1U ATS and
OID atsConfigBankOverLoadThreshold of total for the 2U ATS.
Setting this OID does not have any impact on the device."
::= { atsConfig 6 }
atsConfigResetValues OBJECT-TYPE
SYNTAX INTEGER {
none(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the ATS configuration to its default values.
Returns (-1) if not supported."
::= { atsConfig 7 }
atsConfigLineVRMS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To configure the input RMS voltage."
::= { atsConfig 8 }
atsConfigLineVRMSNarrowLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To configure the Line VRMS Narrow Limit."
::= { atsConfig 9 }
atsConfigLineVRMSMediumLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To configure the Line VRMS Medium Limit."
::= { atsConfig 10 }
atsConfigLineVRMSWideLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To configure the Line VRMS Wide Limit."
::= { atsConfig 11 }
atsConfigFrequencyDeviation OBJECT-TYPE
SYNTAX INTEGER {
one(1),
two(2),
three(3),
five(5),
ten(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To configure the frequency deviation.
AP77xx units uses the options of 1, 2, or 3.
AP44xx units uses the options of 3, 5, or 10."
::= { atsConfig 12 }
-- Bank table
atsConfigBankTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the bank table."
::= { atsConfig 13 }
atsConfigBankTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATSConfigBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of each ATS bank."
::= { atsConfig 14 }
atsConfigBankEntry OBJECT-TYPE
SYNTAX ATSConfigBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to bank current threshold"
INDEX { atsConfigBankTableIndex }
::= { atsConfigBankTable 1 }
ATSConfigBankEntry ::=
SEQUENCE {
atsConfigBankTableIndex INTEGER,
atsConfigBank INTEGER,
atsConfigBankLowLoadThreshold INTEGER,
atsConfigBankNearOverLoadThreshold INTEGER,
atsConfigBankOverLoadThreshold INTEGER
}
atsConfigBankTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index to the bank table entry."
::= { atsConfigBankEntry 1 }
atsConfigBank OBJECT-TYPE
SYNTAX INTEGER {
total (1),
bank1 (2),
bank2 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bank number of an ATS"
::= { atsConfigBankEntry 2 }
atsConfigBankLowLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the current drawn is nearing
a low consumption condition. It is represented in Amps.
A warning will be issued when the load is less than the
threshold value.
A threshold value of 0 Amps disables this warning.
Maximum value must be less than the value returned
by the atsConfigBankNearOverLoadThreshold OID."
::= { atsConfigBankEntry 3 }
atsConfigBankNearOverLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the current drawn is nearing
an overload condition. It is represented in Amps.
A warning will be issued when the load is greater than
or equal to the threshold value.
Minimum value must be greater than the value returned by
the atsConfigBankLowLoadThreshold OID.
Maximum value must be less than or equal to the value
returned by the atsConfigBankOverLoadThreshold OID."
::= { atsConfigBankEntry 4 }
atsConfigBankOverLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the current drawn has entered
an overload condition. It is represented in Amps.
A warning will be issued when the load is greater than or
equal to the threshold value.
Minimum value must be greater than or equal to the value
returned by the atsConfigBankNearOverLoadThreshold OID.
Maximum value must be less than or equal to the value returned by
atsIdentDeviceRating OID."
::= { atsConfigBankEntry 5 }
-- Phase table
atsConfigPhaseTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the phase table."
::= { atsConfig 15 }
atsConfigPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATSConfigPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of each ATS phase."
::= { atsConfig 16 }
atsConfigPhaseEntry OBJECT-TYPE
SYNTAX ATSConfigPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to phase threshold"
INDEX { atsConfigPhaseTableIndex }
::= { atsConfigPhaseTable 1 }
ATSConfigPhaseEntry ::=
SEQUENCE {
atsConfigPhaseTableIndex INTEGER,
atsConfigPhase INTEGER,
atsConfigPhaseLowLoadThreshold INTEGER,
atsConfigPhaseNearOverLoadThreshold INTEGER,
atsConfigPhaseOverLoadThreshold INTEGER
}
atsConfigPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the phase table entry."
::= { atsConfigPhaseEntry 1 }
atsConfigPhase OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase number of an ATS"
::= { atsConfigPhaseEntry 2 }
atsConfigPhaseLowLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the current drawn is nearing
a low consumption condition. It is represented in Amps.
A warning will be issued when the load is less than the
threshold value.
A threshold value of 0 Amps disables this warning.
Maximum value must be less than the value returned
by the atsConfigPhaseNearOverLoadThreshold OID."
::= { atsConfigPhaseEntry 3 }
atsConfigPhaseNearOverLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the current drawn is nearing
an overload condition. It is represented in Amps.
A warning will be issued when the load is greater than
or equal to the threshold value.
Minimum value must be greater than the value returned by
the atsConfigPhaseLowLoadThreshold OID.
Maximum value must be less than or equal to the value
returned by the atsConfigPhaseOverLoadThreshold OID."
::= { atsConfigPhaseEntry 4 }
atsConfigPhaseOverLoadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A threshold that indicates the current drawn has entered
an overload condition. It is represented in Amps.
A warning will be issued when the load is greater than or
equal to the threshold value.
Minimum value must be greater than or equal to the value
returned by the atsConfigPhaseNearOverLoadThreshold OID.
Maximum value must be less than or equal to the value
returned by atsIdentDeviceRating OID."
::= { atsConfigPhaseEntry 5 }
-- the atsStatus group
atsStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
atsNeverDiscovered(1),
atsCommEstablished(2),
atsCommLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the current communication status
of the Automatic Transfer Switch. "
::= { atsStatusDeviceStatus 1 }
atsStatusSelectedSource OBJECT-TYPE
SYNTAX INTEGER {
sourceA(1),
sourceB(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the current source of power. "
::= { atsStatusDeviceStatus 2 }
atsStatusRedundancyState OBJECT-TYPE
SYNTAX INTEGER {
atsRedundancyLost(1),
atsFullyRedundant(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the current redundancy state of the ATS.
atsRedundancyLost(1) indicates that the ATS is unable to
switch over to the alternate power source if the current source fails.
atsFullyRedundant(2) indicates that the ATS will switch over to
the alternate power source if the current source fails."
::= { atsStatusDeviceStatus 3 }
atsStatusOverCurrentState OBJECT-TYPE
SYNTAX INTEGER {
atsOverCurrent(1),
atsCurrentOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the output current state of the ATS.
atsOverCurrent(1) indicates that the ATS has exceeded the output
current threshold and will not allow a switch over to the alternate power
source if the current source fails.
atsCurrentOK(2) indicates that the output current is below the
output current threshold.
This OID returns the value of the OID atsOutputPhaseState for the 1U ATS and
OID atsOutputBankState for the 2U ATS."
::= { atsStatusDeviceStatus 4 }
atsStatus5VPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS 5V power supply.
atsPowerSupplyFailure(1) indicates the 5V power supply has failed
and that the ATS serial port Configuration Menu is not accessible .
atsPowerSupplyOK(2) indicates that the ATS 5V power supply
is operating within tolerance. This is only supported by AP77xx SKUs."
::= { atsStatusDeviceStatus 5 }
atsStatus24VPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS 24V power supply for Source A.
atsPowerSupplyFailure(1) indicates the 24V power supply has failed
and the ATS is unable to switch over to the alternate power source if
the current source fails.
atsPowerSupplyOK(2) indicates that the ATS 24V power supply
is operating within tolerance."
::= { atsStatusDeviceStatus 6 }
atsStatus24VSourceBPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS 24V power supply for Source B.
atsPowerSupplyFailure(1) indicates the 24V power supply has failed
and the ATS is unable to switch over to the alternate power source if
the current source fails.
atsPowerSupplyOK(2) indicates that the ATS 24V power supply
is operating within tolerance."
::= { atsStatusDeviceStatus 7 }
atsStatusPlus12VPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS 12V power supply.
atsPowerSupplyFailure(1) indicates the 12V power supply has failed
and the ATS is unable to monitor the current sensors.
atsPowerSupplyOK(2) indicates that the ATS 12V power supply
is operating within tolerance. This is only supported by AP77xx SKUs."
::= { atsStatusDeviceStatus 8 }
atsStatusMinus12VPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS -12V power supply.
atsPowerSupplyFailure(1) indicates the -12V power supply has failed
and the ATS is unable to monitor the current sensors.
atsPowerSupplyOK(2) indicates that the ATS -12V power supply
is operating within tolerance. This is only supported by AP77xx SKUs."
::= { atsStatusDeviceStatus 9 }
atsStatusSwitchStatus OBJECT-TYPE
SYNTAX INTEGER {
fail(1),
ok(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the status of the ATS."
::= { atsStatusDeviceStatus 10 }
atsStatusFrontPanel OBJECT-TYPE
SYNTAX INTEGER {
locked(1),
unlocked(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS front panel.
locked(1): Front panel button cannot be used to change the sources.
unlocked(2): Front panel button can be used to change the sources. "
::= { atsStatusDeviceStatus 11 }
atsStatusSourceAStatus OBJECT-TYPE
SYNTAX INTEGER {
fail(1),
ok(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the status of the Source A."
::= { atsStatusDeviceStatus 12 }
atsStatusSourceBStatus OBJECT-TYPE
SYNTAX INTEGER {
fail(1),
ok(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the status of the Source B."
::= { atsStatusDeviceStatus 13 }
atsStatusPhaseSyncStatus OBJECT-TYPE
SYNTAX INTEGER {
inSync(1),
outOfSync(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the status of the phase synch."
::= { atsStatusDeviceStatus 14 }
atsStatusVoltageOutStatus OBJECT-TYPE
SYNTAX INTEGER {
fail(1),
ok(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the output voltage status."
::= { atsStatusDeviceStatus 15 }
atsStatusHardwareStatus OBJECT-TYPE
SYNTAX INTEGER {
fail(1),
ok(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the status of display board hardware."
::= { atsStatusDeviceStatus 16 }
atsStatus3dot3VPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS 3.3V power supply.
atsPowerSupplyFailure(1) indicates the 3.3V power supply has failed.
atsPowerSupplyOK(2) indicates that the ATS 3.3V power supply
is operating within tolerance. This is only supported by AP44xx units."
::= {atsStatusDeviceStatus 17 }
atsStatus1Dot0VPowerSupply OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS 1.0V power supply.
atsPowerSupplyFailure(1) indicates the 1V power supply has failed.
atsPowerSupplyOK(2) indicates that the ATS 1.0V power supply
is operating within tolerance. This is only supported by AP44xx units."
::= {atsStatusDeviceStatus 18 }
atsStatusVBoostSourceA OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS Source A Boost 48V voltage.
atsPowerSupplyFailure(1) indicates the ATS Source A Boost 48V voltage has failed.
atsPowerSupplyOK(2) indicates that the ATS Source A Boost 48V voltage
is operating within tolerance. This is only supported by AP44xx units."
::= {atsStatusDeviceStatus 19 }
atsStatusVBoostSourceB OBJECT-TYPE
SYNTAX INTEGER {
atsPowerSupplyFailure(1),
atsPowerSupplyOK(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable returns the present state of the ATS Source B Boost 48V voltage.
atsPowerSupplyFailure(1) indicates the ATS Source B Boost 48V voltage has failed.
atsPowerSupplyOK(2) indicates that the ATS Source B Boost 48V voltage
is operating within tolerance. This is only supported by AP44xx units."
::= {atsStatusDeviceStatus 20 }
atsStatusResetMaxMinValues OBJECT-TYPE
SYNTAX INTEGER {
none(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the maximum and minimum ATS values:
atsInputMaxVoltage, atsInputMinVoltage,
atsInputMaxCurrent, atsInputMinCurrent,
atsInputMaxPower, atsInputMinPower,
atsOutputMaxCurrent, atsOutputMinCurrent,
atsOutputMaxLoad, atsOutputMinLoad,
atsOutputMaxPercentLoad, atsOutputMinPercentLoad,
atsOutputMaxPower, atsOutputMinPower,
atsOutputMaxPercentPower, atsOutputMinPercentPower.
These variables represent the maximum and minimum ATS values
since the last time they were read or reset by this OID.
Values unsupported by this ATS will return (-1)."
::= { atsStatusResetValues 1 }
--
-- Input Group
--
-- Number of Inputs
atsNumInputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input feeds to this device.
This variable indicates the number of rows in the
input table."
::= { atsStatusInput 1 }
-- Input Table
atsInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtsInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the value of atsNumInputs."
::= { atsStatusInput 2 }
atsInputEntry OBJECT-TYPE
SYNTAX AtsInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input."
INDEX { atsInputTableIndex }
::= { atsInputTable 1 }
AtsInputEntry ::= SEQUENCE {
atsInputTableIndex INTEGER,
atsNumInputPhases INTEGER,
atsInputVoltageOrientation INTEGER,
atsInputFrequency INTEGER,
atsInputType INTEGER,
atsInputName DisplayString
}
atsInputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { atsInputEntry 1 }
atsNumInputPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input phases utilized in this
device. The sum of all the atsNumInputPhases
variable indicates the number of rows in the
input phase table."
::= { atsInputEntry 2 }
atsInputVoltageOrientation OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
singlePhase(2),
splitPhase(3),
threePhasePhaseToNeutral(4),
threePhasePhaseToPhase(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage orientation:
1: unknown for this Source
2: singlePhase - phase 1 voltage is between Phase 1
and Neutral.
3: splitPhase - phase 1 voltage is between Phase 1 and
Neutral; phase 2 voltage is between Phase 2 and Neutral;
phase 3 voltage is between Phase 1 and Phase 2.
4: threePhasePhaseToNeutral - phase 1 voltage is between
Phase 1 and Neutral; phase 2 voltage is between Phase 2
and Neutral; phase 3 voltage is between Phase 3 and
Neutral.
5: threePhasePhaseToPhase - phase 1 voltage is between
Phase 1 and Phase 2; phase 2 voltage is between Phase 2
and Phase 3; phase 3 voltage is between Phase 3 and
Phase 1."
::= { atsInputEntry 3 }
atsInputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input frequency in Hertz, or -1 if it's unsupported
by this Source."
::= { atsInputEntry 4 }
atsInputType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
main(2),
bypass(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input type."
::= { atsInputEntry 5 }
atsInputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A name given to a particular input."
::= { atsInputEntry 6 }
-- Input Phase Table
atsInputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtsInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the sum of the atsNumInputPhases."
::= { atsStatusInput 3 }
atsInputPhaseEntry OBJECT-TYPE
SYNTAX AtsInputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input phase."
INDEX { atsInputPhaseTableIndex, atsInputPhaseIndex }
::= { atsInputPhaseTable 1 }
AtsInputPhaseEntry ::= SEQUENCE {
atsInputPhaseTableIndex INTEGER,
atsInputPhaseIndex INTEGER,
atsInputVoltage INTEGER,
atsInputMaxVoltage INTEGER,
atsInputMinVoltage INTEGER,
atsInputCurrent INTEGER,
atsInputMaxCurrent INTEGER,
atsInputMinCurrent INTEGER,
atsInputPower INTEGER,
atsInputMaxPower INTEGER,
atsInputMinPower INTEGER
}
atsInputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input identifier."
::= { atsInputPhaseEntry 1 }
atsInputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input phase identifier."
::= { atsInputPhaseEntry 2 }
atsInputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input voltage in VAC, or -1 if it's unsupported
by this Source."
::= { atsInputPhaseEntry 3 }
atsInputMaxVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum input voltage in VAC measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsInputPhaseEntry 4 }
atsInputMinVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum input voltage in VAC measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsInputPhaseEntry 5 }
atsInputCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input current in amperes, or -1 if it's
unsupported by this Source."
::= { atsInputPhaseEntry 6 }
atsInputMaxCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum input current in amperes measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsInputPhaseEntry 7 }
atsInputMinCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum input current in amperes measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsInputPhaseEntry 8 }
atsInputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input power in Watts, or -1 if it's unsupported
by this Source."
::= { atsInputPhaseEntry 9 }
atsInputMaxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum input power in Watts measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsInputPhaseEntry 10 }
atsInputMinPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum input power in Watts measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsInputPhaseEntry 11 }
--
-- The Output group.
--
-- Number of Outputs
atsNumOutputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output feeds to this device.
This variable indicates the number of rows in the
output table."
::= { atsStatusOutput 1 }
-- Output Table
atsOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtsOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of entries
is given by the value of atsOutputNumPhases."
::= { atsStatusOutput 2 }
atsOutputEntry OBJECT-TYPE
SYNTAX AtsOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output."
INDEX { atsOutputTableIndex }
::= { atsOutputTable 1 }
AtsOutputEntry ::= SEQUENCE {
atsOutputTableIndex INTEGER,
atsNumOutputPhases INTEGER,
atsOutputVoltageOrientation INTEGER,
atsOutputFrequency INTEGER
}
atsOutputTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { atsOutputEntry 1 }
atsNumOutputPhases OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output phases utilized in this
device. The sum of all the atsNumOutputPhases
variable indicates the number of rows in the
output phase table."
::= { atsOutputEntry 2 }
atsOutputVoltageOrientation OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
singlePhase(2),
splitPhase(3),
threePhasePhaseToNeutral(4),
threePhasePhaseToPhase(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage orientation:
1: unknown for this ATS
2: singlePhase - phase 1 voltage is between Phase 1
and Neutral.
3: splitPhase - phase 1 voltage is between Phase 1 and
Neutral; phase 2 voltage is between Phase 2 and Neutral;
phase 3 voltage is between Phase 1 and Phase 2.
4: threePhasePhaseToNeutral - phase 1 voltage is between
Phase 1 and Neutral; phase 2 voltage is between Phase 2
and Neutral; phase 3 voltage is between Phase 3 and
Neutral.
5: threePhasePhaseToPhase - phase 1 voltage is between
Phase 1 and Phase 2; phase 2 voltage is between Phase 2
and Phase 3; phase 3 voltage is between Phase 3 and
Phase 1."
::= { atsOutputEntry 3 }
atsOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output frequency in Hertz, or -1 if it's
unsupported by this ATS."
::= { atsOutputEntry 4 }
-- Output Phase Table
atsOutputPhaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtsOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of
entries is given by the sum of the atsNumOutputPhases."
::= { atsStatusOutput 3 }
atsOutputPhaseEntry OBJECT-TYPE
SYNTAX AtsOutputPhaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output phase."
INDEX { atsOutputPhaseTableIndex, atsOutputPhaseIndex }
::= { atsOutputPhaseTable 1 }
AtsOutputPhaseEntry ::= SEQUENCE {
atsOutputPhaseTableIndex INTEGER,
atsOutputPhaseIndex INTEGER,
atsOutputVoltage INTEGER,
atsOutputCurrent INTEGER,
atsOutputMaxCurrent INTEGER,
atsOutputMinCurrent INTEGER,
atsOutputLoad INTEGER,
atsOutputMaxLoad INTEGER,
atsOutputMinLoad INTEGER,
atsOutputPercentLoad INTEGER,
atsOutputMaxPercentLoad INTEGER,
atsOutputMinPercentLoad INTEGER,
atsOutputPower INTEGER,
atsOutputMaxPower INTEGER,
atsOutputMinPower INTEGER,
atsOutputPercentPower INTEGER,
atsOutputMaxPercentPower INTEGER,
atsOutputMinPercentPower INTEGER,
atsOutputPhaseState INTEGER
}
atsOutputPhaseTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output identifier."
::= { atsOutputPhaseEntry 1 }
atsOutputPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3),
neutral(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each output phase utilized in
this device and one for neutral. "
::= { atsOutputPhaseEntry 2 }
atsOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage in VAC, or -1 if it's unsupported
by this ATS."
::= { atsOutputPhaseEntry 3 }
atsOutputCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output current in 0.1 amperes drawn
by the load on the ATS, or -1 if it's unsupported
by this ATS."
::= { atsOutputPhaseEntry 4 }
atsOutputMaxCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output current in 0.1 amperes measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 5 }
atsOutputMinCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output current in 0.1 amperes measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 6 }
atsOutputLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output load in VA, or -1 if it's unsupported
by this ATS."
::= { atsOutputPhaseEntry 7 }
atsOutputMaxLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output load in VA measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 8 }
atsOutputMinLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output load in VA measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 9 }
atsOutputPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the ATS load capacity in VA at
redundancy @ (n + x) presently being used on this
output phase, or -1 if it's unsupported by this ATS."
::= { atsOutputPhaseEntry 10 }
atsOutputMaxPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently
being used on this output phase since the last time
this variable was read or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 11 }
atsOutputMinPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently
being used on this output phase since the last time
this variable was read or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 12 }
atsOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output apparent power in VA, or
-1 if it's unsupported by this ATS."
::= { atsOutputPhaseEntry 13 }
atsOutputMaxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output power in VAs measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 14 }
atsOutputMinPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output power in VA measured
since the last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 15 }
atsOutputPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the ATSpower capacity in VA at
redundancy @ (n + x) presently being used on this
output phase, or -1 if it's unsupported by this ATS."
::= { atsOutputPhaseEntry 16 }
atsOutputMaxPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently
being used on this output phase since the last time
this variable was read or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 17 }
atsOutputMinPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently
being used on this output phase since the last time
this variable was read or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputPhaseEntry 18 }
atsOutputPhaseState OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
lowload (2),
nearoverload (3),
overload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the phase load state.
normal(1) indicates that the bank is operating properly
within the atsConfigPhaseLowLoadThreshold and
atsConfigPhaseNearOverLoadThreshold OID values.
lowload(2) indicates that the bank load has dropped below
the atsConfigPhaseLowLoadThreshold OID value. An SNMP trap
will occur when this state is entered or cleared.
nearoverload(3) indicates that the bank load is greater than
or equal to the atsConfigPhaseNearOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
overload(4) indicates that the bank load is greater than or
equal to the atsConfigPhaseOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared."
::= { atsOutputPhaseEntry 19 }
atsOutputBankTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the bank table."
::= { atsStatusOutput 4 }
atsOutputBankTable OBJECT-TYPE
SYNTAX SEQUENCE OF ATSOutputBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting table entries."
::= { atsStatusOutput 5 }
atsOutputBankEntry OBJECT-TYPE
SYNTAX ATSOutputBankEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This gives access to bank table entries"
INDEX { atsOutputBankTableIndex }
::= { atsOutputBankTable 1 }
ATSOutputBankEntry ::=
SEQUENCE {
atsOutputBankTableIndex INTEGER,
atsOutputPhase INTEGER,
atsOutputBank INTEGER,
atsOutputBankCurrent Gauge,
atsOutputBankState INTEGER,
atsOutputBankOutputVoltage INTEGER,
atsOutputBankMaxCurrent INTEGER,
atsOutputBankMinCurrent INTEGER,
atsOutputBankLoad INTEGER,
atsOutputBankMaxLoad INTEGER,
atsOutputBankMinLoad INTEGER,
atsOutputBankPercentLoad INTEGER,
atsOutputBankMaxPercentLoad INTEGER,
atsOutputBankMinPercentLoad INTEGER,
atsOutputBankPower INTEGER,
atsOutputBankMaxPower INTEGER,
atsOutputBankMinPower INTEGER,
atsOutputBankPercentPower INTEGER,
atsOutputBankMaxPercentPower INTEGER,
atsOutputBankMinPercentPower INTEGER
}
atsOutputBankTableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the bank table entry."
::= { atsOutputBankEntry 1 }
atsOutputPhase OBJECT-TYPE
SYNTAX INTEGER {
phase1 (1),
phase2 (2),
phase3 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The phase number of an ATS"
::= { atsOutputBankEntry 2 }
atsOutputBank OBJECT-TYPE
SYNTAX INTEGER {
total (1),
bank1 (2),
bank2 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bank number of an ATS"
::= { atsOutputBankEntry 3 }
atsOutputBankCurrent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the bank current measured
in tenths of Amps."
::= { atsOutputBankEntry 4 }
atsOutputBankState OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
lowload (2),
nearoverload (3),
overload (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return the bank load state.
normal(1) indicates that the bank is
operating properly within the atsConfigBankLowLoadThreshold
and atsConfigBankNearOverLoadThreshold OID values.
lowload(2) indicates that the bank load has dropped below the
atsConfigBankLowLoadThreshold OID value. An SNMP trap will
occur when this state is entered or cleared.
nearoverload(3) indicates that the bank load is greater than
or equal to the atsConfigBankNearOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
overload(4) indicates that the bank load is greater than or
equal to the atsConfigBankOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared."
::= { atsOutputBankEntry 5 }
atsOutputBankOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output voltage in VAC, or -1 if it's unsupported
by this ATS."
::= { atsOutputBankEntry 6 }
atsOutputBankMaxCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output current, on the bank represented by
OID atsOutputBank, in 0.1 amperes measured since the
last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 7 }
atsOutputBankMinCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output current, on the bank represented by
OID atsOutputBank, in 0.1 amperes measured since the
last time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 8 }
atsOutputBankLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output load, on the bank represented by
OID atsOutputBank, in VA, or -1 if it's
unsupported by this ATS."
::= { atsOutputBankEntry 9 }
atsOutputBankMaxLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output load, on the bank represented by
OID atsOutputBank, in VA measured since the last
time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 10 }
atsOutputBankMinLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output load, on the bank represented by
OID atsOutputBank, in VA measured since the last
time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 11 }
atsOutputBankPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the ATS load capacity in VA at
redundancy @ (n + x) presently being used on this
bank, represented by OID atsOutputBank.
Returns (-1) if unsupported."
::= { atsOutputBankEntry 12 }
atsOutputBankMaxPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently
being used on this bank, represented by OID atsOutputBank,
since the last time this variable was read or
reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 13 }
atsOutputBankMinPercentLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently
being used on this bank, represented by OID
atsOutputBank, since the last time this variable was
read or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 14 }
atsOutputBankPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output apparent power in VA on the bank represented by
OID atsOutputBank or -1 if it's unsupported by this ATS."
::= { atsOutputBankEntry 15 }
atsOutputBankMaxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum output power in VA measured on the bank
represented by OID atsOutputBank since the last
time this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 16 }
atsOutputBankMinPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum output power in VA measured on the bank
represented by OID atsOutputBank since the last time
this variable was read
or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 17 }
atsOutputBankPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the ATSpower capacity in Watts at
redundancy @ (n + x) presently being used on this
bank, represented by OID atsOutputBank, or
-1 if it's unsupported by this ATS."
::= { atsOutputBankEntry 18 }
atsOutputBankMaxPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently
being used on this bank, represented by OID
atsOutputBank, since the last time this variable
was read or reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 19 }
atsOutputBankMinPercentPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently
being used on this bank, represented by OID atsOutputBank
since the last time this variable was read or
reset (atsStatusResetMaxMinValues).
Returns (-1) if unsupported."
::= { atsOutputBankEntry 20 }
-- the dcmim2IdentSystem group
dcmim2IdentSysFWVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer representation of the power plant Master Controller firmware revision."
::= { dcmim2IdentSystem 1 }
-- the dcmim2ControlSystem group
dcmim2ControlRunFunctBatteryTest OBJECT-TYPE
SYNTAX INTEGER {
battTestOff (1),
battTestOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this OID will return the battery functional test state. If
the test is off, the battTestOff (1) value will be returned.
If the test is on, the battTestOn (2) value will be
returned.
Setting this OID to battTestOff (1) will turn the battery functional test off.
Setting this OID to battTestOn (2) will turn the battery functional test on."
::= { dcmim2ControlSystem 1 }
dcmim2ControlRunCapacityBatteryTest OBJECT-TYPE
SYNTAX INTEGER {
battTestOff (1),
battTestOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this OID will return the battery capacity test state. If
the test is off, the battTestOff (1) value will be returned.
If the test is on, the battTestOn (2) value will be
returned.
Setting this OID to battTestOff (1) will turn the battery capacity test off.
Setting this OID to battTestOn (2) will turn the battery capacity test on."
::= { dcmim2ControlSystem 2 }
-- the dcmim2ConfigSystem group
dcmim2ConfigSysHighTempTrip OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trip level (threshold) at which System High Temp alarm condition is created.
Range 28 to 100 (degC).
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dcmim2ConfigSystem 1 }
dcmim2ConfigSysHighTempReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which System High Temp alarm condition is reset (cleared).
Range 25 to (upper temp - 3) (degC).
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dcmim2ConfigSystem 2 }
dcmim2ConfigSysLowTempTrip OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trip level (threshold) at which System Low Temp alarm condition is created.
Range -100 to 10 (degC).
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dcmim2ConfigSystem 3 }
dcmim2ConfigSysLowTempReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which System Low Temp alarm condition is reset (cleared).
Range (lower temp + 3) to 13 (degC).
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dcmim2ConfigSystem 4 }
-- the dcmim2ConfigBattery group
dcmim2ConfigBattFloatVolt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery Float Voltage defined at 25 degrees Celsius.
Values are represented in thousandths of Volts (mV)."
::= { dcmim2ConfigBattery 1 }
dcmim2ConfigBattMaxRecharge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery Maximum Recharge Rate. This is the maximum current used
during battery charging.
Values are represented in thousandths of Amps (mA)."
::= { dcmim2ConfigBattery 2 }
dcmim2ConfigBattMfgCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Battery capacity (Amp-Hour Size) as specified by the battery manufacturer.
Values are represented in thousandths of Amp hours (mAHr)."
::= { dcmim2ConfigBattery 3 }
dcmim2ConfigBattType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of battery in the powerplant
Valid values range from 0 to 254."
::= { dcmim2ConfigBattery 4 }
dcmim2ConfigBattFunctTestDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Duration of the battery functional test.
Values are represented in thousandths of seconds (mSecs)."
::= { dcmim2ConfigBattery 5 }
dcmim2ConfigBattFunctTestThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold the battery voltage of the system must remain above
in order to pass the battery functional test.
Values are represented in thousandths of Volts (mV)."
::= { dcmim2ConfigBattery 6 }
dcmim2ConfigBattCapacityTestPercent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold for good battery capacity test results.
Values range from 0 to 100 percent."
::= { dcmim2ConfigBattery 7 }
dcmim2ConfigBattCapacityTestEndThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Safeguard voltage at which battery capacity test will end
if there is a battery problem.
Values are represented in thousandths of Volts (mV)."
::= { dcmim2ConfigBattery 8 }
dcmim2ConfigBattCapacityTestCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Constant current value used during battery capacity testing.
Values are represented in thousandths of Amps (mA)."
::= { dcmim2ConfigBattery 9 }
-- the dcmim2ConfigLVD group
dcmim2ConfigLVDTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant LVDs controllable
by this IP address."
::= { dcmim2ConfigLVD 1 }
dcmim2ConfigLVDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dcmim2ConfigLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the LVDs. The number of
entries is contained in the dcmim2ConfigLVDTableSize OID."
::= { dcmim2ConfigLVD 2 }
dcmim2ConfigLVDEntry OBJECT-TYPE
SYNTAX Dcmim2ConfigLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The LVD to configure."
INDEX { dcmim2ConfigLVDIndex }
::= { dcmim2ConfigLVDTable 1 }
Dcmim2ConfigLVDEntry ::=
SEQUENCE {
dcmim2ConfigLVDIndex INTEGER,
dcmim2ConfigLVDTrip INTEGER,
dcmim2ConfigLVDReset INTEGER,
dcmim2ConfigLVDState INTEGER
}
dcmim2ConfigLVDIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant LVD."
::= { dcmim2ConfigLVDEntry 1 }
dcmim2ConfigLVDTrip OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LVD Trip threshold. System bus voltage at which LVD will trip (open)
during a battery backup operation.
Values are represented in thousandths of Volts (mV)."
::= { dcmim2ConfigLVDEntry 2 }
dcmim2ConfigLVDReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LVD Reset threshold. System bus voltage at which LVD will reset (close)
after AC power has been restored.
Values are represented in thousandths of Volts (mV)."
::= { dcmim2ConfigLVDEntry 3 }
dcmim2ConfigLVDState OBJECT-TYPE
SYNTAX INTEGER {
statusClosed (1),
statusOpened (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusClosed (1) if the LVD is closed.
statusOpened (2) will be returned if the LVD is opened."
::= { dcmim2ConfigLVDEntry 4 }
-- the dcmim2StatusSystem group
dcmim2StatusSysRectCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System (Total Rectifier) current in thousandths of Amps (mA)."
::= { dcmim2StatusSystem 1 }
dcmim2StatusSysLoadCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Load current in thousandths of Amps (mA)."
::= { dcmim2StatusSystem 2 }
dcmim2StatusSysBusVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System bus voltage in thousandths of Volts (mV)."
::= { dcmim2StatusSystem 3 }
dcmim2StatusSysAmbientTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System temperature based on sensor on Master Controller PCB.
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dcmim2StatusSystem 4 }
dcmim2StatusSysUpTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Length of time since the DC Powerplant controller has been powered up."
::= { dcmim2StatusSystem 5 }
dcmim2StatusSysTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
in the DC system, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { dcmim2StatusSystem 6 }
-- the dcmim2StatusRectifier group
dcmim2StatusRectTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant rectifiers viewable
by this IP address."
::= { dcmim2StatusRectifier 1 }
dcmim2StatusRectTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dcmim2StatusRectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing settings of the rectifiers. The number of
entries is contained in the dcmim2StatusRectTableSize OID."
::= { dcmim2StatusRectifier 2 }
dcmim2StatusRectEntry OBJECT-TYPE
SYNTAX Dcmim2StatusRectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The rectifier to gather status from."
INDEX { dcmim2StatusRectIndex }
::= { dcmim2StatusRectTable 1 }
Dcmim2StatusRectEntry ::=
SEQUENCE {
dcmim2StatusRectIndex INTEGER,
dcmim2StatusRectDevType INTEGER,
dcmim2StatusRectID INTEGER,
dcmim2StatusRectPhyAddr INTEGER,
dcmim2StatusRectFail INTEGER,
dcmim2StatusRectCurrent INTEGER
}
dcmim2StatusRectIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant rectifier."
::= { dcmim2StatusRectEntry 1 }
dcmim2StatusRectDevType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier device type."
::= { dcmim2StatusRectEntry 2 }
dcmim2StatusRectID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier ID. This enumerates the number of the rectifier within
a group of rectifiers."
::= { dcmim2StatusRectEntry 3 }
dcmim2StatusRectPhyAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the rectifier physical address (the address on the bus)."
::= { dcmim2StatusRectEntry 4 }
dcmim2StatusRectFail OBJECT-TYPE
SYNTAX INTEGER {
statusTrue (1),
statusFalse (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusTrue (1) if the rectifier has failed.
statusFalse (2) will be returned if the rectifier has not failed."
::= { dcmim2StatusRectEntry 5 }
dcmim2StatusRectCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID shows the individual rectifier current in thousandths of Amps (mA)."
::= { dcmim2StatusRectEntry 6 }
-- the dcmim2StatusBattery group
dcmim2StatusBattFloatVolt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery Float Voltage represented in thousandths of Volts (mV)."
::= { dcmim2StatusBattery 1 }
dcmim2StatusBattCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery Current: This OID shows the battery current in thousandths of Amps (mA)."
::= { dcmim2StatusBattery 2 }
dcmim2StatusBattTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery Temperature:
Values are represented in thousandths of a degree.
Units are displayed in the scale shown in
the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
::= { dcmim2StatusBattery 3 }
dcmim2StatusBattMfgCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery capacity (Amp-Hour Size) as specified by the battery manufacturer.
Values are represented in thousandths of Amp hours (mAHr)."
::= { dcmim2StatusBattery 4 }
dcmim2StatusBattTestCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Battery capacity (Amp-Hour Size) as determined by the battery capacity test.
Values are represented in thousandths of Amp hours (mAHr)."
::= { dcmim2StatusBattery 5 }
dcmim2StatusBattFunctTestResult OBJECT-TYPE
SYNTAX INTEGER{
functTestNotPerformed (1),
functTestInProcess (2),
functTestInterrupted (3),
functTestPass (4),
functTestFail (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Results of the last battery functional test that was run."
::= { dcmim2StatusBattery 6 }
dcmim2StatusBattCapacityTestResult OBJECT-TYPE
SYNTAX INTEGER{
capacityTestNotPerformed (1),
capacityTestInProcess (2),
capacityTestInterrupted (3),
capacityTestPass (4),
capacityTestFail (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Results of the last battery capacity test that was run."
::= { dcmim2StatusBattery 7 }
-- the dcmim2StatusLVD group
dcmim2StatusLVDTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant LVDs accessible
by this IP address."
::= { dcmim2StatusLVD 1 }
dcmim2StatusLVDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dcmim2StatusLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing the LVDs. The number of
entries is contained in the dcmim2StatusLVDTableSize OID."
::= { dcmim2StatusLVD 2 }
dcmim2StatusLVDEntry OBJECT-TYPE
SYNTAX Dcmim2StatusLVDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The LVD to access."
INDEX { dcmim2StatusLVDIndex }
::= { dcmim2StatusLVDTable 1 }
Dcmim2StatusLVDEntry ::=
SEQUENCE {
dcmim2StatusLVDIndex INTEGER,
dcmim2StatusLVDState INTEGER
}
dcmim2StatusLVDIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the DC powerplant LVD."
::= { dcmim2StatusLVDEntry 1 }
dcmim2StatusLVDState OBJECT-TYPE
SYNTAX INTEGER {
statusClosed (1),
statusOpened (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this OID will return statusClosed (1) if the LVD is closed.
statusOpened (2) will be returned if the LVD is opened."
::= { dcmim2StatusLVDEntry 2 }
-- the dcmim2StatusAlarms group
dcmim2StatusAlarmsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of DC powerplant alarms viewable
by this IP address."
::= { dcmim2StatusAlarms 1 }
dcmim2StatusAlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dcmim2StatusAlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for accessing system alarms. The number of
entries is contained in the dcmim2StatusAlarmsTableSize OID."
::= { dcmim2StatusAlarms 2 }
dcmim2StatusAlarmsEntry OBJECT-TYPE
SYNTAX Dcmim2StatusAlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The alarm to display."
INDEX { dcmim2StatusAlarmsIndex }
::= { dcmim2StatusAlarmsTable 1 }
Dcmim2StatusAlarmsEntry ::=
SEQUENCE {
dcmim2StatusAlarmsIndex INTEGER,
dcmim2StatusAlarmsText DisplayString
}
dcmim2StatusAlarmsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the system alarm."
::= { dcmim2StatusAlarmsEntry 1 }
dcmim2StatusAlarmsText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 16 character text describing the active alarm condition."
::= { dcmim2StatusAlarmsEntry 2 }
-- External Environmental Monitor
emIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the Environmental Monitor."
::= { emIdent 1 }
emConfigProbesNumProbes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of temperature and humidity probes available."
::= { emConfig 1 }
emConfigProbesTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmConfigProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of probes supported by the Environmental Monitor
and their configurations."
::= { emConfig 2 }
emConfigProbesEntry OBJECT-TYPE
SYNTAX EmConfigProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Environmental Monitor probe configurations."
INDEX { emConfigProbeNumber }
::= { emConfigProbesTable 1 }
EmConfigProbesEntry ::=
SEQUENCE {
emConfigProbeNumber
INTEGER,
emConfigProbeName
DisplayString,
emConfigProbeHighTempThreshold
INTEGER,
emConfigProbeLowTempThreshold
INTEGER,
emConfigProbeTempUnits
INTEGER,
emConfigProbeHighHumidThreshold
INTEGER,
emConfigProbeLowHumidThreshold
INTEGER,
emConfigProbeHighTempEnable
INTEGER,
emConfigProbeLowTempEnable
INTEGER,
emConfigProbeHighHumidEnable
INTEGER,
emConfigProbeLowHumidEnable
INTEGER,
emConfigProbeMaxTempThreshold
INTEGER,
emConfigProbeMinTempThreshold
INTEGER,
emConfigProbeMaxHumidThreshold
INTEGER,
emConfigProbeMinHumidThreshold
INTEGER,
emConfigProbeMaxTempEnable
INTEGER,
emConfigProbeMinTempEnable
INTEGER,
emConfigProbeMaxHumidEnable
INTEGER,
emConfigProbeMinHumidEnable
INTEGER,
emConfigProbeTempHysteresis
INTEGER,
emConfigProbeHumidHysteresis
INTEGER,
emConfigProbeLocation
DisplayString
}
emConfigProbeNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into an Environmental Monitor probe entry."
::= { emConfigProbesEntry 1 }
emConfigProbeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name of the probe set by the user,
possibly denoting its location or purpose."
::= { emConfigProbesEntry 2 }
emConfigProbeHighTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature alarm threshold for the probe.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { emConfigProbesEntry 3 }
emConfigProbeLowTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature alarm threshold for the probe.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { emConfigProbesEntry 4 }
emConfigProbeTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { emConfigProbesEntry 5 }
emConfigProbeHighHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high humidity alarm threshold for the probe in
percent relative humidity."
::= { emConfigProbesEntry 6 }
emConfigProbeLowHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low humidity alarm threshold for the probe in
percent relative humidity."
::= { emConfigProbesEntry 7 }
emConfigProbeHighTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 8 }
emConfigProbeLowTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 9 }
emConfigProbeHighHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 10 }
emConfigProbeLowHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 11 }
emConfigProbeMaxTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum temperature alarm threshold for the probe.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { emConfigProbesEntry 12 }
emConfigProbeMinTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum temperature alarm threshold for the probe.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { emConfigProbesEntry 13 }
emConfigProbeMaxHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximun humidity alarm threshold for the probe in
percent relative humidity."
::= { emConfigProbesEntry 14 }
emConfigProbeMinHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum humidity alarm threshold for the probe in
percent relative humidity."
::= { emConfigProbesEntry 15 }
emConfigProbeMaxTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 16 }
emConfigProbeMinTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 17 }
emConfigProbeMaxHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 18 }
emConfigProbeMinHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { emConfigProbesEntry 19 }
emConfigProbeTempHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of degrees beyond the temperature thresholds
at which an active temperature alarm will be cleared.
This configuration setting applies to all temperature
thresholds.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { emConfigProbesEntry 20 }
emConfigProbeHumidHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of percent RH points beyond the humidity
thresholds at which an active humidity alarm will be
cleared. This configuration setting applies to all
humidity thresholds.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { emConfigProbesEntry 21 }
emConfigProbeLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string describing the location of the probe."
::= { emConfigProbesEntry 22 }
emConfigContactsNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts supported by the Environmental
Monitor."
::= { emConfig 3 }
emConfigContactsTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmConfigContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the Environmental Monitor
and their configurations."
::= { emConfig 4 }
emConfigContactsEntry OBJECT-TYPE
SYNTAX EmConfigContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Environmental Monitor contact configurations."
INDEX { emConfigContactNumber }
::= { emConfigContactsTable 1 }
EmConfigContactsEntry ::=
SEQUENCE {
emConfigContactNumber
INTEGER,
emConfigContactName
DisplayString,
emConfigContactEnable
INTEGER,
emConfigContactSeverity
INTEGER,
emConfigContactNormalState
INTEGER,
emConfigContactLocation
DisplayString
}
emConfigContactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an Environmental Monitor contact."
::= { emConfigContactsEntry 1 }
emConfigContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for an Environmental Monitor
contact set by the user, possibly denoting its
location or purpose."
::= { emConfigContactsEntry 2 }
emConfigContactEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An Environmental Monitor contact alarm enable/disable.
No alarm will be generated if the contact is disabled(1).
An alarm will be generated if the contact is enabled(2)
and the contact has been faulted."
::= { emConfigContactsEntry 3 }
emConfigContactSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the input contact is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emConfigContactsEntry 4 }
emConfigContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
open(1),
closed(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contact state that will be considered normal, i.e.
will not trigger an alarm. The states are open(1) or
closed(2)."
::= { emConfigContactsEntry 5 }
emConfigContactLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive label for the contact denoting its
location or purpose."
::= { emConfigContactsEntry 6 }
emStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
noComm(1),
comm(2),
commLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status between the agent
and the Environmental Monitor.
noComm(1), Communication has never been established.
comm(2), Communication has been established.
commLost(3), Communication was established, but was lost."
::= { emStatus 1 }
emStatusProbesNumProbes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of available probes on the Environmental
Monitor."
::= { emStatus 2 }
emStatusProbesTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmStatusProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of probes supported by the Environmental Monitor
and their status."
::= { emStatus 3 }
emStatusProbesEntry OBJECT-TYPE
SYNTAX EmStatusProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of the probe."
INDEX { emStatusProbeNumber }
::= { emStatusProbesTable 1 }
EmStatusProbesEntry ::=
SEQUENCE {
emStatusProbeNumber
INTEGER,
emStatusProbeName
DisplayString,
emStatusProbeStatus
INTEGER,
emStatusProbeCurrentTemp
INTEGER,
emStatusProbeTempUnits
INTEGER,
emStatusProbeCurrentHumid
INTEGER,
emStatusProbeHighTempViolation
INTEGER,
emStatusProbeLowTempViolation
INTEGER,
emStatusProbeHighHumidViolation
INTEGER,
emStatusProbeLowHumidViolation
INTEGER,
emStatusProbeMaxTempViolation
INTEGER,
emStatusProbeMinTempViolation
INTEGER,
emStatusProbeMaxHumidViolation
INTEGER,
emStatusProbeMinHumidViolation
INTEGER
}
emStatusProbeNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the probe."
::= { emStatusProbesEntry 1 }
emStatusProbeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A descriptive name for the probe set by the user,
possibly denoting its location or purpose."
::= { emStatusProbesEntry 2 }
emStatusProbeStatus OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
connected(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The connected status of the probe, either
disconnected(1) or connected(2)."
::= { emStatusProbesEntry 3 }
emStatusProbeCurrentTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current temperature reading from the probe displayed
in the units shown in the 'emStatusProbeTempUnits' OID
(Celsius or Fahrenheit)."
::= { emStatusProbesEntry 4 }
emStatusProbeTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { emStatusProbesEntry 5 }
emStatusProbeCurrentHumid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current humidity reading from the probe in
percent relative humidity."
::= { emStatusProbesEntry 6 }
emStatusProbeHighTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
highTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high temperature violation status of the probe
temperature reading. This OID will show a highTempViolation(2)
if the current temperature reading shown in the
'emStatusProbeCurrentTemp' OID is greater than or equal to
the high temperature threshold value, the
'emConfigProbeHighTempThreshold' OID, and the value of the
'emConfigProbeHighTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'emConfigProbeHighTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { emStatusProbesEntry 7 }
emStatusProbeLowTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
lowTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high temperature violation status of the probe
temperature reading. This OID will show a lowTempViolation(2)
if the current temperature reading shown in the
'emStatusProbeCurrentTemp' OID is less than or equal to
the low temperature threshold value, the
'emConfigProbeLowTempThreshold' OID, and the value of the
'emConfigProbeLowTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'emConfigProbeLowTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { emStatusProbesEntry 8 }
emStatusProbeHighHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
highHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high humidity violation status of the probe humidity
reading. This OID will show a highTempViolation(2)
if the current humidity reading shown in the
'emStatusProbeCurrentHumid' OID is greater than or equal to
the high humidity threshold value, the
'emConfigProbeHighHumidThreshold' OID, and the value of the
'emConfigProbeHighHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'emConfigProbeHighHumidEnable' OID is
disabled, this OID will show disabled(3)"
::= { emStatusProbesEntry 9 }
emStatusProbeLowHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
lowHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The low humidity violation status of the probe humidity
reading. This OID will show a lowTempViolation(2)
if the current humidity reading shown in the
'emStatusProbeCurrentHumid' OID is less than or equal to
the low humidity threshold value, the
'emConfigProbeLowHumidThreshold' OID, and the value of the
'emConfigProbeLowHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'emConfigProbeLowHumidEnable' OID is
disabled, this OID will show disabled(3)."
::= { emStatusProbesEntry 10 }
emStatusProbeMaxTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
maxTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The max temperature violation status of the probe
temperature reading. This OID will show a maxTempViolation(2)
if the current temperature reading shown in the
'emStatusProbeCurrentTemp' OID is greater than or equal to
the maximun temperature threshold value, the
'emConfigProbeMaxTempThreshold' OID, and the value of the
'emConfigProbeMaxTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'emConfigProbeMaxTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { emStatusProbesEntry 11 }
emStatusProbeMinTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
minTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum temperature violation status of the probe
temperature reading. This OID will show a minTempViolation(2)
if the current temperature reading shown in the
'emStatusProbeCurrentTemp' OID is less than or equal to
the minimum temperature threshold value, the
'emConfigProbeMinTempThreshold' OID, and the value of the
'emConfigProbeMinTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'emConfigProbeMinTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { emStatusProbesEntry 12 }
emStatusProbeMaxHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
maxHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum humidity violation status of the probe humidity
reading. This OID will show a maxTempViolation(2)
if the current humidity reading shown in the
'emStatusProbeCurrentHumid' OID is greater than or equal to
the maximum humidity threshold value, the
'emConfigProbeMaxHumidThreshold' OID, and the value of the
'emConfigProbeMaxHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'emConfigProbeMaxHumidEnable' OID is
disabled, this OID will show disabled(3)"
::= { emStatusProbesEntry 13 }
emStatusProbeMinHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
minHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum humidity violation status of the probe humidity
reading. This OID will show a minTempViolation(2)
if the current humidity reading shown in the
'emStatusProbeCurrentHumid' OID is less than or equal to
the minimum humidity threshold value, the
'emConfigProbeMinHumidThreshold' OID, and the value of the
'emConfigProbeMinHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'emConfigProbeMinHumidEnable' OID is
disabled, this OID will show disabled(3)."
::= { emStatusProbesEntry 14 }
emStatusContactsNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts supported by the
Environmental Monitor."
::= { emStatus 4 }
emStatusContactsTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmStatusContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the Environmental Monitor
and their status."
::= { emStatus 5 }
emStatusContactsEntry OBJECT-TYPE
SYNTAX EmStatusContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of the contact."
INDEX { emStatusContactNumber }
::= { emStatusContactsTable 1 }
EmStatusContactsEntry ::=
SEQUENCE {
emStatusContactNumber
INTEGER,
emStatusContactName
DisplayString,
emStatusContactStatus
INTEGER
}
emStatusContactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the Environmental Monitor contact."
::= { emStatusContactsEntry 1 }
emStatusContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A descriptive name for the Environmental Monitor contact
set by the user, possibly denoting its location or purpose."
::= { emStatusContactsEntry 2 }
emStatusContactStatus OBJECT-TYPE
SYNTAX INTEGER {
noFault(1),
fault(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Environmental Monitor contact. The status
will show noFault(1) if the contact is in the normal state
and the 'emConfigContactEnable' OID is enabled. The status will
show a fault(2) if the contact is faulted and the
'emContactEnable' OID is enabled. If the 'emConfigContactEnable'
OID is disabled, the status will show disabled(3)."
::= { emStatusContactsEntry 3 }
-- Modular Environmental Manager (MEM)
-- MEM Modules Status table
memModulesStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memModulesStatusTable."
::= { memModules 1 }
memModulesStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemModulesStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting status information from the modules
attached to the system."
::= { memModules 2 }
memModulesStatusEntry OBJECT-TYPE
SYNTAX MemModulesStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memModulesStatusModuleNumber }
::= { memModulesStatusTable 1 }
MemModulesStatusEntry ::=
SEQUENCE {
memModulesStatusModuleNumber INTEGER,
memModulesStatusModuleName DisplayString,
memModulesStatusModuleLocation DisplayString,
memModulesStatusModelNumber DisplayString,
memModulesStatusSerialNumber DisplayString,
memModulesStatusFirmwareRev DisplayString,
memModulesStatusHardwareRev DisplayString
}
memModulesStatusModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module number."
::= { memModulesStatusEntry 1 }
memModulesStatusModuleName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module name."
::= { memModulesStatusEntry 2 }
memModulesStatusModuleLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the module."
::= { memModulesStatusEntry 3 }
memModulesStatusModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the module."
::= { memModulesStatusEntry 4 }
memModulesStatusSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the module."
::= { memModulesStatusEntry 5 }
memModulesStatusFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the module."
::= { memModulesStatusEntry 6 }
memModulesStatusHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision."
::= { memModulesStatusEntry 7 }
-- MEM Modules Config table
memModulesConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memModulesConfigTable."
::= { memModules 3 }
memModulesConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemModulesConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting status information from the modules
attached to the system."
::= { memModules 4 }
memModulesConfigEntry OBJECT-TYPE
SYNTAX MemModulesConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memModulesConfigModuleNumber }
::= { memModulesConfigTable 1 }
MemModulesConfigEntry ::=
SEQUENCE {
memModulesConfigModuleNumber INTEGER,
memModulesConfigModuleName DisplayString,
memModulesConfigModuleLocation DisplayString
}
memModulesConfigModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module number."
::= { memModulesConfigEntry 1 }
memModulesConfigModuleName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The module name."
::= { memModulesConfigEntry 2 }
memModulesConfigModuleLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the module."
::= { memModulesConfigEntry 3 }
-- MEM Sensor Status Table
memSensorsStatusSysTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
in the system, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { memSensors 1 }
memSensorsStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memSensorsStatusTable."
::= { memSensors 2 }
memSensorsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemSensorsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting sensor status information."
::= { memSensors 3 }
memSensorsStatusEntry OBJECT-TYPE
SYNTAX MemSensorsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memSensorsStatusModuleNumber, memSensorsStatusSensorNumber }
::= { memSensorsStatusTable 1 }
MemSensorsStatusEntry ::=
SEQUENCE {
memSensorsStatusModuleNumber INTEGER,
memSensorsStatusSensorNumber INTEGER,
memSensorsStatusSensorName DisplayString,
memSensorsStatusSensorLocation DisplayString,
memSensorsTemperature INTEGER,
memSensorsHumidity INTEGER,
memSensorsCommStatus INTEGER,
memSensorsAlarmStatus INTEGER,
memSensorsTemperatureHighPrec INTEGER,
memSensorsVoltage INTEGER
}
memSensorsStatusModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the sensor is attached to."
::= { memSensorsStatusEntry 1 }
memSensorsStatusSensorNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this sensor on the module."
::= { memSensorsStatusEntry 2 }
memSensorsStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor name."
::= { memSensorsStatusEntry 3 }
memSensorsStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the sensor."
::= { memSensorsStatusEntry 4 }
memSensorsTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor's current temperature reading.
Units are displayed in the scale shown in
the memSensorsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { memSensorsStatusEntry 5 }
memSensorsHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current humidity reading from the sensor."
::= { memSensorsStatusEntry 6 }
memSensorsCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled(1),
commsOK(2),
commsLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the sensor."
::= { memSensorsStatusEntry 7 }
memSensorsAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
memNormal(1),
memWarning(2),
memCritical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the sensor.
memWarning is not applicable to voltage sensor."
::= { memSensorsStatusEntry 8 }
memSensorsTemperatureHighPrec OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current temperature is displayed in tenths of degrees in the scale
shown in the memSensorsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { memSensorsStatusEntry 9 }
memSensorsVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor's current voltage reading.
Values are displayed in tenths of Volts DC."
::= { memSensorsStatusEntry 10 }
-- MEM Sensor Config Table
memSensorsConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memSensorsConfigTable."
::= { memSensors 4 }
memSensorsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemSensorsConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting configuration information from
sensors attached to the system."
::= { memSensors 5 }
memSensorsConfigEntry OBJECT-TYPE
SYNTAX MemSensorsConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memSensorsConfigModuleNumber, memSensorsConfigSensorNumber }
::= { memSensorsConfigTable 1 }
MemSensorsConfigEntry ::=
SEQUENCE {
memSensorsConfigModuleNumber INTEGER,
memSensorsConfigSensorNumber INTEGER,
memSensorsName DisplayString,
memSensorsLocation DisplayString,
memSensorsAlarmGeneration INTEGER,
memSensorsTempMaxThresh INTEGER,
memSensorsTempHighThresh INTEGER,
memSensorsTempLowThresh INTEGER,
memSensorsTempMinThresh INTEGER,
memSensorsTempThreshHysteresis INTEGER,
memSensorsTempShortDecRateThreshValue INTEGER,
memSensorsTempShortDecRateThreshTime INTEGER,
memSensorsTempShortIncRateThreshValue INTEGER,
memSensorsTempShortIncRateThreshTime INTEGER,
memSensorsTempLongDecRateThreshValue INTEGER,
memSensorsTempLongDecRateThreshTime INTEGER,
memSensorsTempLongIncRateThreshValue INTEGER,
memSensorsTempLongIncRateThreshTime INTEGER,
memSensorsHumidityMaxThresh INTEGER,
memSensorsHumidityHighThresh INTEGER,
memSensorsHumidityLowThresh INTEGER,
memSensorsHumidityMinThresh INTEGER,
memSensorsHumidityThreshHysteresis INTEGER,
memSensorsVoltMaxThresh INTEGER,
memSensorsVoltMinThresh INTEGER
}
memSensorsConfigModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the sensor is attached to."
::= { memSensorsConfigEntry 1 }
memSensorsConfigSensorNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this sensor on the module."
::= { memSensorsConfigEntry 2 }
memSensorsName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for the sensor."
::= { memSensorsConfigEntry 3 }
memSensorsLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the sensor."
::= { memSensorsConfigEntry 4 }
memSensorsAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation on this sensor."
::= { memSensorsConfigEntry 5 }
memSensorsTempMaxThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which the MEM will generate a maximum
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 6 }
memSensorsTempHighThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which the MEM will generate a high
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 7 }
memSensorsTempLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which the MEM will generate a low
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 8 }
memSensorsTempMinThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which the MEM will generate a minimum
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 9 }
memSensorsTempThreshHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The change in temperature required to cause a
temperature alarm to change from an active to an inactive state.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 10 }
memSensorsTempShortDecRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature short-term decreasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 11 }
memSensorsTempShortDecRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not decrease
beyond the value specified by the temperature short-term
decreasing rate threshold value."
::= { memSensorsConfigEntry 12 }
memSensorsTempShortIncRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature short-term increasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 13 }
memSensorsTempShortIncRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not increase
beyond the value specified by the temperature short-term
increasing rate threshold value."
::= { memSensorsConfigEntry 14 }
memSensorsTempLongDecRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature long-term decreasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 15 }
memSensorsTempLongDecRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not decrease
beyond the value specified by the temperature long-term
decreasing rate threshold value."
::= { memSensorsConfigEntry 16 }
memSensorsTempLongIncRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature long-term increasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID."
::= { memSensorsConfigEntry 17 }
memSensorsTempLongIncRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not increase
beyond the value specified by the temperature long-term
increasing rate threshold value."
::= { memSensorsConfigEntry 18 }
memSensorsHumidityMaxThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidity at which the maximum humidity threshold alarm
will be generated."
::= { memSensorsConfigEntry 19 }
memSensorsHumidityHighThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidity at which the high humidity threshold alarm
will be generated."
::= { memSensorsConfigEntry 20 }
memSensorsHumidityLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidity at which the low humidity threshold alarm
will be generated."
::= { memSensorsConfigEntry 21 }
memSensorsHumidityMinThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidity at which the minimum humidity threshold alarm
will be generated."
::= { memSensorsConfigEntry 22 }
memSensorsHumidityThreshHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The change in humidity required to cause an active humidity
alarm to change to the inactive state."
::= { memSensorsConfigEntry 23 }
memSensorsVoltMaxThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The voltage at which the MEM will generate a maximum
voltage threshold violation alarm on this sensor."
::= { memSensorsConfigEntry 24 }
memSensorsVoltMinThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The voltage at which the MEM will generate a minimum
voltage threshold violation alarm on this sensor."
::= { memSensorsConfigEntry 25 }
-- MEM Input Status Table
memInputsStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memInputsStatusTable."
::= { memInputs 1 }
memInputsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemInputsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting input status information."
::= { memInputs 2 }
memInputsStatusEntry OBJECT-TYPE
SYNTAX MemInputsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memInputsStatusModuleNumber, memInputsStatusInputNumber }
::= { memInputsStatusTable 1 }
MemInputsStatusEntry ::=
SEQUENCE {
memInputsStatusModuleNumber INTEGER,
memInputsStatusInputNumber INTEGER,
memInputsStatusInputName DisplayString,
memInputsStatusInputLocation DisplayString,
memInputsStatusCurrentState INTEGER,
memInputsStatusCurrentAnalogValue DisplayString,
memInputsStatusAlarmStatus INTEGER,
memInputsCommStatus INTEGER
}
memInputsStatusModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the input is attached to."
::= { memInputsStatusEntry 1 }
memInputsStatusInputNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this input on the module."
::= { memInputsStatusEntry 2 }
memInputsStatusInputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input name."
::= { memInputsStatusEntry 3 }
memInputsStatusInputLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the input."
::= { memInputsStatusEntry 4 }
memInputsStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
inputClosedHighMEM (1),
inputOpenLowMEM (2),
inputDisabled (3),
inputStateNotApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the input. This OID will return
inputStateNotAplicable(4) for analog input types. "
::= { memInputsStatusEntry 5 }
memInputsStatusCurrentAnalogValue OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current analog value of the input in the units defined
by the user."
::= { memInputsStatusEntry 6 }
memInputsStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
memNormal(1),
memWarning(2),
memCritical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the input."
::= { memInputsStatusEntry 7 }
memInputsCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled(1),
commsOK(2),
commsLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the input. This OID is only supported by NBRK0200."
::= { memInputsStatusEntry 8 }
-- MEM Input Config Table
memInputsConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memInputsConfigTable."
::= { memInputs 3 }
memInputsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemInputsConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting input configuration information."
::= { memInputs 4 }
memInputsConfigEntry OBJECT-TYPE
SYNTAX MemInputsConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memInputsConfigModuleNumber, memInputsConfigInputNumber }
::= { memInputsConfigTable 1 }
MemInputsConfigEntry ::=
SEQUENCE {
memInputsConfigModuleNumber INTEGER,
memInputsConfigInputNumber INTEGER,
memInputName DisplayString,
memInputLocation DisplayString,
memInputType INTEGER,
memInputAlarmGeneration INTEGER,
memInputNormalState INTEGER,
memInputAbnormalSeverity INTEGER,
memInputNumberCalibrationPoints INTEGER,
memInputAnalogCalibrationPoint1 DisplayString,
memInputAnalogCalibrationPoint2 DisplayString,
memInputAnalogCalibrationPoint3 DisplayString,
memInputAnalogCalibrationPoint4 DisplayString,
memInputAnalogCalibrationPoint5 DisplayString,
memInputAnalogCalibrationPoint1Value DisplayString,
memInputAnalogCalibrationPoint2Value DisplayString,
memInputAnalogCalibrationPoint3Value DisplayString,
memInputAnalogCalibrationPoint4Value DisplayString,
memInputAnalogCalibrationPoint5Value DisplayString,
memInputAnalogMeasurementUnits DisplayString,
memInputAnalogMaxThresh DisplayString,
memInputAnalogHighThresh DisplayString,
memInputAnalogLowThresh DisplayString,
memInputAnalogMinThresh DisplayString,
memInputAnalogThreshHysteresis DisplayString
}
memInputsConfigModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the input is attached to."
::= { memInputsConfigEntry 1 }
memInputsConfigInputNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this input on the module."
::= { memInputsConfigEntry 2 }
memInputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the input."
::= { memInputsConfigEntry 3 }
memInputLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the input."
::= { memInputsConfigEntry 4 }
memInputType OBJECT-TYPE
SYNTAX INTEGER {
noConnection (1),
dryContact (2),
digital (3),
analogmAmps (4),
analogVolts (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of input this contact will take."
::= { memInputsConfigEntry 5 }
memInputAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation on this input."
::= { memInputsConfigEntry 6 }
memInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
inputClosedHighMEM (1),
inputOpenLowMEM (2),
inputDisabled (3),
inputStateNotApplicable (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the normal (no alarm) state of the input."
::= { memInputsConfigEntry 7 }
memInputAbnormalSeverity OBJECT-TYPE
SYNTAX INTEGER {
inputSeverityinformational (1),
inputSeveritywarning (2),
inputSeveritysevere (3),
inputSeverityNotApplicable (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the severity of the event that is associated
with the abnormal state of the input. This OID will return
inputSeverityNotApplicable(4) for analog input types. "
::= { memInputsConfigEntry 8 }
memInputNumberCalibrationPoints OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of calibration points that are required for
this input."
::= { memInputsConfigEntry 9 }
memInputAnalogCalibrationPoint1 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The electrical value that the input sensor will measure at the
first calibration point.
This OID is relevant only for inputs configured as analog type (ma or V)."
::= { memInputsConfigEntry 10 }
memInputAnalogCalibrationPoint2 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The electrical value that the input sensor will measure at the
second calibration point.
This OID is relevant only for inputs configured as analog type (ma or V)."
::= { memInputsConfigEntry 11 }
memInputAnalogCalibrationPoint3 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The electrical value that the input sensor will measure at the
third calibration point.
This OID is relevant only for inputs configured as analog type (ma or V)."
::= { memInputsConfigEntry 12 }
memInputAnalogCalibrationPoint4 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The electrical value that the input sensor will measure at the
fourth calibration point.
This OID is relevant only for inputs configured as analog type (ma or V)."
::= { memInputsConfigEntry 13 }
memInputAnalogCalibrationPoint5 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The electrical value that the input sensor will measure at the
fifth calibration point.
This OID is relevant only for inputs configured as analog type (ma or V)."
::= { memInputsConfigEntry 14 }
memInputAnalogCalibrationPoint1Value OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the
first calibration point."
::= { memInputsConfigEntry 15 }
memInputAnalogCalibrationPoint2Value OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the
second calibration point."
::= { memInputsConfigEntry 16 }
memInputAnalogCalibrationPoint3Value OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the
third calibration point."
::= { memInputsConfigEntry 17 }
memInputAnalogCalibrationPoint4Value OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the
fourth calibration point."
::= { memInputsConfigEntry 18 }
memInputAnalogCalibrationPoint5Value OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the
fifth calibration point."
::= { memInputsConfigEntry 19 }
memInputAnalogMeasurementUnits OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The units of measure to be used for this input."
::= { memInputsConfigEntry 20 }
memInputAnalogMaxThresh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The input value at which a maximum threshold violation
alarm will be generated on this input."
::= { memInputsConfigEntry 21 }
memInputAnalogHighThresh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The input value at which a high threshold violation
alarm will be generated on this input."
::= { memInputsConfigEntry 22 }
memInputAnalogLowThresh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The input value at which a low threshold violation
alarm will be generated on this input."
::= { memInputsConfigEntry 23 }
memInputAnalogMinThresh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The input value at which a minimum threshold violation
alarm will be generated on this input."
::= { memInputsConfigEntry 24 }
memInputAnalogThreshHysteresis OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The change in value required to cause an alarm on this input
to change from active to inactive."
::= { memInputsConfigEntry 25 }
-- MEM Output Status Table
memOutputStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memOutputStatusTable."
::= { memOutputs 1 }
memOutputStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemOutputStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting output status information."
::= { memOutputs 2 }
memOutputStatusEntry OBJECT-TYPE
SYNTAX MemOutputStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memOutputStatusModuleNumber, memOutputStatusOutputNumber }
::= { memOutputStatusTable 1 }
MemOutputStatusEntry ::=
SEQUENCE {
memOutputStatusModuleNumber INTEGER,
memOutputStatusOutputNumber INTEGER,
memOutputStatusOutputName DisplayString,
memOutputStatusOutputLocation DisplayString,
memOutputStatusCurrentState INTEGER,
memOutputStatusAlarmState INTEGER
}
memOutputStatusModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the output is attached to."
::= { memOutputStatusEntry 1 }
memOutputStatusOutputNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this output on the module."
::= { memOutputStatusEntry 2 }
memOutputStatusOutputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output name."
::= { memOutputStatusEntry 3 }
memOutputStatusOutputLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the output."
::= { memOutputStatusEntry 4 }
memOutputStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
memOutputClosed (1),
memOutputOpen (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the output."
::= { memOutputStatusEntry 5 }
memOutputStatusAlarmState OBJECT-TYPE
SYNTAX INTEGER {
memOutputNormal (1),
memOutputAbnormal (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm state of the output."
::= { memOutputStatusEntry 6 }
-- MEM Output Config Table
memOutputConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memOutputConfigTable."
::= { memOutputs 3 }
memOutputConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemOutputConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting output configuration information."
::= { memOutputs 4 }
memOutputConfigEntry OBJECT-TYPE
SYNTAX MemOutputConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memOutputConfigModuleNumber, memOutputConfigOutputNumber }
::= { memOutputConfigTable 1 }
MemOutputConfigEntry ::=
SEQUENCE {
memOutputConfigModuleNumber INTEGER,
memOutputConfigOutputNumber INTEGER,
memOutputName DisplayString,
memOutputLocation DisplayString,
memOutputNormalState INTEGER,
memOutputAction INTEGER
}
memOutputConfigModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the output is attached to."
::= { memOutputConfigEntry 1 }
memOutputConfigOutputNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this output on the module."
::= { memOutputConfigEntry 2 }
memOutputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the output."
::= { memOutputConfigEntry 3 }
memOutputLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the output."
::= { memOutputConfigEntry 4 }
memOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
memOutputClosed (1),
memOutputOpen (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The state of the output that will not generate an alarm."
::= { memOutputConfigEntry 5 }
memOutputAction OBJECT-TYPE
SYNTAX INTEGER {
memActionClose (1),
memActionOpen (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Manual control actions for the output. SNMP get command will return the state
of the output, SNMP set of this OID controls the output."
::= { memOutputConfigEntry 6 }
-- MEM Outlet Status Table
memOutletStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memOutletStatusTable."
::= { memOutlets 1 }
memOutletStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting outlet status information."
::= { memOutlets 2 }
memOutletStatusEntry OBJECT-TYPE
SYNTAX MemOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memOutletStatusModuleNumber, memOutletStatusOutletNumber }
::= { memOutletStatusTable 1 }
MemOutletStatusEntry ::=
SEQUENCE {
memOutletStatusModuleNumber INTEGER,
memOutletStatusOutletNumber INTEGER,
memOutletStatusOutletName DisplayString,
memOutletStatusOutletLocation DisplayString,
memOutletStatusCurrentState INTEGER,
memOutletStatusAlarmState INTEGER
}
memOutletStatusModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the outlet is attached to."
::= { memOutletStatusEntry 1 }
memOutletStatusOutletNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this outlet on the module."
::= { memOutletStatusEntry 2 }
memOutletStatusOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outlet name."
::= { memOutletStatusEntry 3 }
memOutletStatusOutletLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the outlet."
::= { memOutletStatusEntry 4 }
memOutletStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the outlet."
::= { memOutletStatusEntry 5 }
memOutletStatusAlarmState OBJECT-TYPE
SYNTAX INTEGER {
memOutletNormal (1),
memOutletAbnormal (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm state of the outlet."
::= { memOutletStatusEntry 6 }
-- MEM Outlet Config Table
memOutletConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memOutletConfigTable."
::= { memOutlets 3 }
memOutletConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting outlet configuration information."
::= { memOutlets 4 }
memOutletConfigEntry OBJECT-TYPE
SYNTAX MemOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memOutletConfigModuleNumber, memOutletConfigOutletNumber }
::= { memOutletConfigTable 1 }
MemOutletConfigEntry ::=
SEQUENCE {
memOutletConfigModuleNumber INTEGER,
memOutletConfigOutletNumber INTEGER,
memOutletName DisplayString,
memOutletLocation DisplayString,
memOutletNormalState INTEGER,
memOutletAction INTEGER
}
memOutletConfigModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the Outlet is attached to."
::= { memOutletConfigEntry 1 }
memOutletConfigOutletNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this Outlet on the module."
::= { memOutletConfigEntry 2 }
memOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the Outlet."
::= { memOutletConfigEntry 3 }
memOutletLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the Outlet."
::= { memOutletConfigEntry 4 }
memOutletNormalState OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The state of the Outlet that will not generate an alarm."
::= { memOutletConfigEntry 5 }
memOutletAction OBJECT-TYPE
SYNTAX INTEGER {
turnOff (1),
turnOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Manual control actions for the Outlet. Get displays state
of outlet, set controls outlet."
::= { memOutletConfigEntry 6 }
-- MEM Beacon Status Table
memBeaconStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memBeaconStatusTable."
::= { memBeacons 1 }
memBeaconStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemBeaconStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting beacon status information."
::= { memBeacons 2 }
memBeaconStatusEntry OBJECT-TYPE
SYNTAX MemBeaconStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memBeaconStatusModuleNumber, memBeaconStatusBeaconNumber }
::= { memBeaconStatusTable 1 }
MemBeaconStatusEntry ::=
SEQUENCE {
memBeaconStatusModuleNumber INTEGER,
memBeaconStatusBeaconNumber INTEGER,
memBeaconStatusBeaconName DisplayString,
memBeaconStatusBeaconLocation DisplayString,
memBeaconStatusCurrentState INTEGER,
memBeaconStatusAlarmState INTEGER
}
memBeaconStatusModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the beacon is attached to."
::= { memBeaconStatusEntry 1 }
memBeaconStatusBeaconNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this beacon on the module."
::= { memBeaconStatusEntry 2 }
memBeaconStatusBeaconName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The beacon name."
::= { memBeaconStatusEntry 3 }
memBeaconStatusBeaconLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the beacon."
::= { memBeaconStatusEntry 4 }
memBeaconStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the beacon."
::= { memBeaconStatusEntry 5 }
memBeaconStatusAlarmState OBJECT-TYPE
SYNTAX INTEGER {
memBeaconNormal (1),
memBeaconAbnormal (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm state of the beacon."
::= { memBeaconStatusEntry 6 }
-- MEM Beacon Config Table
memBeaconConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memBeaconConfigTable."
::= { memBeacons 3 }
memBeaconConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemBeaconConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting beacon configuration information."
::= { memBeacons 4 }
memBeaconConfigEntry OBJECT-TYPE
SYNTAX MemBeaconConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { memBeaconConfigModuleNumber, memBeaconConfigBeaconNumber }
::= { memBeaconConfigTable 1 }
MemBeaconConfigEntry ::=
SEQUENCE {
memBeaconConfigModuleNumber INTEGER,
memBeaconConfigBeaconNumber INTEGER,
memBeaconConfigName DisplayString,
memBeaconConfigLocation DisplayString,
memBeaconAction INTEGER
}
memBeaconConfigModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module that the beacon is attached to."
::= { memBeaconConfigEntry 1 }
memBeaconConfigBeaconNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this beacon on the module."
::= { memBeaconConfigEntry 2 }
memBeaconConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the beacon."
::= { memBeaconConfigEntry 3 }
memBeaconConfigLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the beacon."
::= { memBeaconConfigEntry 4 }
memBeaconAction OBJECT-TYPE
SYNTAX INTEGER {
turnOff (1),
turnOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control action (on/off) for the beacon. Setting this OID will turn the
beacon on/off. Getting this OID will respond with the current state."
::= { memBeaconConfigEntry 5 }
-- MEM INPUT STATE SENSOR TABLE
memSmokeSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memSmokeSensorStatusTable."
::= { memInputStateSensors 1 }
memSmokeSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemSmokeSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { memInputStateSensors 2 }
memSmokeSensorStatusEntry OBJECT-TYPE
SYNTAX MemSmokeSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to access."
INDEX { memSmokeSensorStatusModuleIndex }
::= { memSmokeSensorStatusTable 1 }
MemSmokeSensorStatusEntry ::=
SEQUENCE {
memSmokeSensorStatusModuleIndex INTEGER,
memSmokeSensorStatusSensorIndex INTEGER,
memSmokeSensorStatusSensorName DisplayString,
memSmokeSensorStatusSensorLocation DisplayString,
memSmokeSensorStatusSensorState INTEGER,
memSmokeSensorStatusSensorSeverity INTEGER,
memSmokeStatusAlarmStatus INTEGER,
memSmokeSensorCommStatus INTEGER
}
memSmokeSensorStatusModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the module entry."
::= { memSmokeSensorStatusEntry 1 }
memSmokeSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memSmokeSensorStatusEntry 2 }
memSmokeSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the smoke sensor."
::= { memSmokeSensorStatusEntry 3 }
memSmokeSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the smoke sensor."
::= { memSmokeSensorStatusEntry 4 }
memSmokeSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
smokeDetected (1),
noSmoke (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the smoke sensor.
smokeDetected (1) indicates there is smoke.
noSmoke (2) indicates there is no smoke.
unknown (3) indicates the state is unknown."
::= { memSmokeSensorStatusEntry 5}
memSmokeSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memSmokeSensorStatusEntry 6 }
memSmokeStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
memNormal(1),
memWarning(2),
memCritical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the smoke sensor."
::= { memSmokeSensorStatusEntry 7 }
memSmokeSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the smoke sensor."
::= { memSmokeSensorStatusEntry 8 }
memVibrationSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memVibrationSensorStatusTable."
::= { memInputStateSensors 3}
memVibrationSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemVibrationSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { memInputStateSensors 4 }
memVibrationSensorStatusEntry OBJECT-TYPE
SYNTAX MemVibrationSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to access."
INDEX { memVibrationSensorStatusModuleIndex }
::= { memVibrationSensorStatusTable 1 }
MemVibrationSensorStatusEntry ::=
SEQUENCE {
memVibrationSensorStatusModuleIndex INTEGER,
memVibrationSensorStatusSensorIndex INTEGER,
memVibrationSensorStatusSensorName DisplayString,
memVibrationSensorStatusSensorLocation DisplayString,
memVibrationSensorStatusSensorState INTEGER,
memVibrationSensorStatusSensorSeverity INTEGER,
memVibrationStatusAlarmStatus INTEGER,
memVibrationSensorCommStatus INTEGER
}
memVibrationSensorStatusModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memVibrationSensorStatusEntry 1 }
memVibrationSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memVibrationSensorStatusEntry 2 }
memVibrationSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the vibration sensor."
::= { memVibrationSensorStatusEntry 3 }
memVibrationSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the vibration sensor."
::= { memVibrationSensorStatusEntry 4 }
memVibrationSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
vibrationDetected (1),
noVibration (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the vibration sensor.
vibrationDetected (1) indicates there is vibration.
noVibration (2) indicates there is no vibration.
unknown (3) indicates the state is unknown."
::= { memVibrationSensorStatusEntry 5 }
memVibrationSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memVibrationSensorStatusEntry 6 }
memVibrationStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
memNormal(1),
memWarning(2),
memCritical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the vibration sensor."
::= { memVibrationSensorStatusEntry 7 }
memVibrationSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the vibration sensor."
::= { memVibrationSensorStatusEntry 8 }
memFluidSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memFluidSensorStatusTable."
::= { memInputStateSensors 5}
memFluidSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemFluidSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual sensors."
::= { memInputStateSensors 6 }
memFluidSensorStatusEntry OBJECT-TYPE
SYNTAX MemFluidSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to access."
INDEX { memFluidSensorStatusModuleIndex }
::= { memFluidSensorStatusTable 1 }
MemFluidSensorStatusEntry ::=
SEQUENCE {
memFluidSensorStatusModuleIndex INTEGER,
memFluidSensorStatusSensorIndex INTEGER,
memFluidSensorStatusSensorName DisplayString,
memFluidSensorStatusSensorLocation DisplayString,
memFluidSensorStatusSensorState INTEGER,
memFluidSensorStatusSensorSeverity INTEGER,
memFluidStatusAlarmStatus INTEGER,
memFluidSensorCommStatus INTEGER
}
memFluidSensorStatusModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memFluidSensorStatusEntry 1 }
memFluidSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memFluidSensorStatusEntry 2 }
memFluidSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the fluid sensor."
::= { memFluidSensorStatusEntry 3 }
memFluidSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the fluid sensor."
::= { memFluidSensorStatusEntry 4 }
memFluidSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
fluidDetected (1),
noFluid (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the fluid sensor.
fluidDetected (1) indicates there is fluid leak.
noFluid (2) indicates there is no fluid leak.
unknown (3) indicates the state is unknown."
::= { memFluidSensorStatusEntry 5 }
memFluidSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memFluidSensorStatusEntry 6 }
memFluidStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
memNormal(1),
memWarning(2),
memCritical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the fluid sensor."
::= { memFluidSensorStatusEntry 7 }
memFluidSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the fluid sensor."
::= { memFluidSensorStatusEntry 8 }
memDoorSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the memDoorSensorStatusTable."
::= { memInputStateSensors 7}
memDoorSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemDoorSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { memInputStateSensors 8}
memDoorSensorStatusEntry OBJECT-TYPE
SYNTAX MemDoorSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to access."
INDEX { memDoorSensorStatusModuleIndex }
::= { memDoorSensorStatusTable 1 }
MemDoorSensorStatusEntry ::=
SEQUENCE {
memDoorSensorStatusModuleIndex INTEGER,
memDoorSensorStatusSensorIndex INTEGER,
memDoorSensorStatusSensorName DisplayString,
memDoorSensorStatusSensorLocation DisplayString,
memDoorSensorStatusSensorState INTEGER,
memDoorSensorStatusSensorSeverity INTEGER,
memDoorStatusAlarmStatus INTEGER,
memDoorSensorCommStatus INTEGER
}
memDoorSensorStatusModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memDoorSensorStatusEntry 1 }
memDoorSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memDoorSensorStatusEntry 2 }
memDoorSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the door sensor."
::= { memDoorSensorStatusEntry 3 }
memDoorSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the door sensor."
::= { memDoorSensorStatusEntry 4 }
memDoorSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the door sensor.
open (1) indicates door open.
closed (2) indicates door closed.
unknown (3) indicates the state is unknown."
::= { memDoorSensorStatusEntry 5 }
memDoorSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memDoorSensorStatusEntry 6 }
memDoorStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
memNormal(1),
memWarning(2),
memCritical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the door sensor."
::= { memDoorSensorStatusEntry 7 }
memDoorSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the door sensor."
::= { memDoorSensorStatusEntry 8 }
-- MEM Input State sensor config
memSmokeSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemSmokeSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { memInputStateSensors 9 }
memSmokeSensorConfigEntry OBJECT-TYPE
SYNTAX MemSmokeSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { memSmokeSensorConfigSensorModuleIndex }
::= { memSmokeSensorConfigTable 1 }
MemSmokeSensorConfigEntry ::=
SEQUENCE {
memSmokeSensorConfigSensorModuleIndex INTEGER,
memSmokeSensorConfigSensorIndex INTEGER,
memSmokeSensorConfigSensorName DisplayString,
memSmokeSensorConfigSensorLocation DisplayString,
memSmokeSensorConfigSensorSeverity INTEGER,
memSmokeSensorConfigAlarmGeneration INTEGER
}
memSmokeSensorConfigSensorModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memSmokeSensorConfigEntry 1 }
memSmokeSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memSmokeSensorConfigEntry 2 }
memSmokeSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the smoke sensor."
::= { memSmokeSensorConfigEntry 3 }
memSmokeSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the smoke sensor."
::= { memSmokeSensorConfigEntry 4 }
memSmokeSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memSmokeSensorConfigEntry 5 }
memSmokeSensorConfigAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation on this input."
::= { memSmokeSensorConfigEntry 6 }
memVibrationSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemVibrationSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { memInputStateSensors 10 }
memVibrationSensorConfigEntry OBJECT-TYPE
SYNTAX MemVibrationSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to configure."
INDEX { memVibrationSensorModuleConfigIndex }
::= { memVibrationSensorConfigTable 1 }
MemVibrationSensorConfigEntry ::=
SEQUENCE {
memVibrationSensorModuleConfigIndex INTEGER,
memVibrationSensorConfigSensorIndex INTEGER,
memVibrationSensorConfigSensorName DisplayString,
memVibrationSensorConfigSensorLocation DisplayString,
memVibrationSensorConfigSensorSeverity INTEGER,
memVibrationSensorConfigAlarmGeneration INTEGER
}
memVibrationSensorModuleConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memVibrationSensorConfigEntry 1 }
memVibrationSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memVibrationSensorConfigEntry 2 }
memVibrationSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the vibration sensor."
::= { memVibrationSensorConfigEntry 3 }
memVibrationSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the vibration sensor."
::= { memVibrationSensorConfigEntry 4 }
memVibrationSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memVibrationSensorConfigEntry 5 }
memVibrationSensorConfigAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation on this input."
::= { memVibrationSensorConfigEntry 6 }
memFluidSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemFluidSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { memInputStateSensors 11 }
memFluidSensorConfigEntry OBJECT-TYPE
SYNTAX MemFluidSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to configure."
INDEX { memFluidSensorModuleConfigIndex }
::= { memFluidSensorConfigTable 1 }
MemFluidSensorConfigEntry ::=
SEQUENCE {
memFluidSensorModuleConfigIndex INTEGER,
memFluidSensorConfigSensorIndex INTEGER,
memFluidSensorConfigSensorName DisplayString,
memFluidSensorConfigSensorLocation DisplayString,
memFluidSensorConfigSensorSeverity INTEGER,
memFluidSensorConfigAlarmGeneration INTEGER
}
memFluidSensorModuleConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memFluidSensorConfigEntry 1 }
memFluidSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memFluidSensorConfigEntry 2 }
memFluidSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the fluid sensor."
::= { memFluidSensorConfigEntry 3 }
memFluidSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the fluid sensor."
::= { memFluidSensorConfigEntry 4 }
memFluidSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memFluidSensorConfigEntry 5 }
memFluidSensorConfigAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation on this input."
::= { memFluidSensorConfigEntry 6 }
memDoorSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemDoorSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { memInputStateSensors 12 }
memDoorSensorConfigEntry OBJECT-TYPE
SYNTAX MemDoorSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { memDoorSensorModuleConfigIndex }
::= { memDoorSensorConfigTable 1 }
MemDoorSensorConfigEntry ::=
SEQUENCE {
memDoorSensorModuleConfigIndex INTEGER,
memDoorSensorConfigSensorIndex INTEGER,
memDoorSensorConfigSensorName DisplayString,
memDoorSensorConfigSensorLocation DisplayString,
memDoorSensorConfigSensorSeverity INTEGER,
memDoorSensorConfigAlarmGeneration INTEGER
}
memDoorSensorModuleConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor module entry."
::= { memDoorSensorConfigEntry 1 }
memDoorSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { memDoorSensorConfigEntry 2 }
memDoorSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the door sensor."
::= { memDoorSensorConfigEntry 3 }
memDoorSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the door sensor."
::= { memDoorSensorConfigEntry 4 }
memDoorSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { memDoorSensorConfigEntry 5 }
memDoorSensorConfigAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation on this input."
::= { memDoorSensorConfigEntry 6 }
-- WIRELESS Table
wirelessSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF WirelessSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { wirelessSensorStatus 1 }
wirelessSensorStatusEntry OBJECT-TYPE
SYNTAX WirelessSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of wireless sensor status table entries."
INDEX { wirelessSensorStatusIndex }
::= { wirelessSensorStatusTable 1 }
WirelessSensorStatusEntry ::=
SEQUENCE {
wirelessSensorStatusIndex INTEGER,
wirelessSensorStatusExtAddr DisplayString,
wirelessSensorStatusName DisplayString,
wirelessSensorStatusAlarmGeneration INTEGER,
wirelessSensorStatusTemperature INTEGER,
wirelessSensorStatusHighTempThresh INTEGER,
wirelessSensorStatusLowTempThresh INTEGER,
wirelessSensorStatusHumidity INTEGER,
wirelessSensorStatusHighHumidityThresh INTEGER,
wirelessSensorStatusLowHumidityThresh INTEGER,
wirelessSensorStatusCommStatus INTEGER,
wirelessSensorStatusMaxTempThresh INTEGER,
wirelessSensorStatusMinTempThresh INTEGER,
wirelessSensorStatusMaxHumidityThresh INTEGER,
wirelessSensorStatusMinHumidityThresh INTEGER,
wirelessSensorStatusBattery INTEGER,
wirelessSensorStatusLowBatteryThresh INTEGER,
wirelessSensorStatusMinBatteryThresh INTEGER,
wirelessSensorStatusRssi INTEGER,
wirelessSensorStatusLowRssiThresh INTEGER,
wirelessSensorStatusMinRssiThresh INTEGER,
wirelessSensorStatusLocation DisplayString,
wirelessSensorStatusAlarmStatus INTEGER
}
wirelessSensorStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { wirelessSensorStatusEntry 1 }
wirelessSensorStatusExtAddr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The extended address is the combination of the unique 10 byte
MAC address of the sensor concatenated with its short address."
::= { wirelessSensorStatusEntry 2 }
wirelessSensorStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the wireless sensor."
::= { wirelessSensorStatusEntry 3 }
wirelessSensorStatusAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether alarm generation is enabled or disabled for the sensor."
::= { wirelessSensorStatusEntry 4 }
wirelessSensorStatusTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current temperature are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorStatusEntry 5 }
wirelessSensorStatusHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorStatusEntry 6 }
wirelessSensorStatusLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorStatusEntry 7 }
wirelessSensorStatusHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 8 }
wirelessSensorStatusHighHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 9 }
wirelessSensorStatusLowHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 10 }
wirelessSensorStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the wireless sensor.
inactive(0) indicates sensor is in the wireless network but not sending information.
active(1) indicates wireless sensor is live and sending information."
::= { wirelessSensorStatusEntry 11 }
wirelessSensorStatusMaxTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorStatusEntry 12 }
wirelessSensorStatusMinTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorStatusEntry 13 }
wirelessSensorStatusMaxHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 14 }
wirelessSensorStatusMinHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 15 }
wirelessSensorStatusBattery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorStatusEntry 16 }
wirelessSensorStatusLowBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorStatusEntry 17 }
wirelessSensorStatusMinBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorStatusEntry 18 }
wirelessSensorStatusRssi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 19 }
wirelessSensorStatusLowRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 20 }
wirelessSensorStatusMinRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorStatusEntry 21 }
wirelessSensorStatusLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the location
of the wireless sensor."
::= { wirelessSensorStatusEntry 22 }
wirelessSensorStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the wireless sensor. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of
the specific alarm conditions listed below. The bit will be '1' if
the condition is present, and '0' if the condition is not present.
Bit Hex. Value Description
1 0x0001 Maximum temperature exceeded.
2 0x0002 High temperature exceeded.
3 0x0004 Low temperature exceeded.
4 0x0008 Minimum temperature exceeded.
5 0x0010 Maximum humidity exceeded.
6 0x0020 High humidity exceeded.
7 0x0040 Low humidity exceeded.
8 0x0080 Minimum humidity exceeded.
9 0x0100 Low battery exceeded.
10 0x0200 Minimum battery exceeded.
11 0x0400 Low signal strength exceeded.
12 0x0800 Minimum signal strength exceeded.
13 0x1000 Sensor inactive."
::= { wirelessSensorStatusEntry 23 }
-- Sensor pod Status
wirelessSensorPodStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF WirelessSensorPodStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual pod sensors."
::= { wirelessSensorPodStatus 1 }
wirelessSensorPodStatusEntry OBJECT-TYPE
SYNTAX WirelessSensorPodStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor pod to access."
INDEX { wirelessSensorPodStatusIndex }
::= { wirelessSensorPodStatusTable 1 }
WirelessSensorPodStatusEntry ::=
SEQUENCE {
wirelessSensorPodStatusIndex INTEGER,
wirelessSensorPodPortIndex INTEGER,
wirelessSensorPodStatusExtAddr DisplayString,
wirelessSensorPodStatusName DisplayString,
wirelessSensorPodStatusAlarmGeneration INTEGER,
wirelessSensorPodStatusTemperature INTEGER,
wirelessSensorPodStatusHighTempThresh INTEGER,
wirelessSensorPodStatusLowTempThresh INTEGER,
wirelessSensorPodStatusHumidity INTEGER,
wirelessSensorPodStatusHighHumidityThresh INTEGER,
wirelessSensorPodStatusLowHumidityThresh INTEGER,
wirelessSensorPodStatusCommStatus INTEGER,
wirelessSensorPodStatusMaxTempThresh INTEGER,
wirelessSensorPodStatusMinTempThresh INTEGER,
wirelessSensorPodStatusMaxHumidityThresh INTEGER,
wirelessSensorPodStatusMinHumidityThresh INTEGER,
wirelessSensorPodStatusDryContactState INTEGER,
wirelessSensorPodStatusDryContactNormalState INTEGER,
wirelessSensorPodStatusBattery INTEGER,
wirelessSensorPodStatusLowBatteryThresh INTEGER,
wirelessSensorPodStatusMinBatteryThresh INTEGER,
wirelessSensorPodStatusRssi INTEGER,
wirelessSensorPodStatusLowRssiThresh INTEGER,
wirelessSensorPodStatusMinRssiThresh INTEGER,
wirelessSensorPodStatusLocation DisplayString,
wirelessSensorPodStatusAlarmStatus INTEGER
}
wirelessSensorPodStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the pod sensor entry."
::= { wirelessSensorPodStatusEntry 1 }
wirelessSensorPodPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The pod sensor port index."
::= { wirelessSensorPodStatusEntry 2 }
wirelessSensorPodStatusExtAddr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The extended address is the combination of the unique 10 byte MAC address
of the sensor concatenated with its short address."
::= { wirelessSensorPodStatusEntry 3 }
wirelessSensorPodStatusName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the sensor pod."
::= { wirelessSensorPodStatusEntry 4 }
wirelessSensorPodStatusAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of whether alarm generation is enabled or disabled."
::= { wirelessSensorPodStatusEntry 5 }
wirelessSensorPodStatusTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodStatusEntry 6 }
wirelessSensorPodStatusHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodStatusEntry 7 }
wirelessSensorPodStatusLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodStatusEntry 8 }
wirelessSensorPodStatusHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 9 }
wirelessSensorPodStatusHighHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 10 }
wirelessSensorPodStatusLowHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 11}
wirelessSensorPodStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the wireless sensor.
inactive(0) indicates pod sensor is in the wireless network but not sending information.
active(1) indicates wireless sensor is live and sending information."
::= { wirelessSensorPodStatusEntry 12 }
wirelessSensorPodStatusMaxTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodStatusEntry 13 }
wirelessSensorPodStatusMinTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodStatusEntry 14 }
wirelessSensorPodStatusMaxHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 15 }
wirelessSensorPodStatusMinHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 16 }
wirelessSensorPodStatusDryContactState OBJECT-TYPE
SYNTAX INTEGER {
drycontactOpen (0),
drycontactClosed (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of the dry contact. If the dry contact is closed,
the drycontactClosed (1) value will be returned. If the dry contact
state is open, the drycontactOpen (0) value will be returned."
::= { wirelessSensorPodStatusEntry 17 }
wirelessSensorPodStatusDryContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyOpen (0),
normallyClosed (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The normal state of the dry contact. If the normal state is closed,
the normallyClosed (1) value will be returned. If the normal state is
open, the normallyOpen (0) value will be returned."
::= { wirelessSensorPodStatusEntry 18 }
wirelessSensorPodStatusBattery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorPodStatusEntry 19 }
wirelessSensorPodStatusLowBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorPodStatusEntry 20 }
wirelessSensorPodStatusMinBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorPodStatusEntry 21 }
wirelessSensorPodStatusRssi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 22 }
wirelessSensorPodStatusLowRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 23 }
wirelessSensorPodStatusMinRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodStatusEntry 24 }
wirelessSensorPodStatusLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the wireless sensor pod."
::= { wirelessSensorPodStatusEntry 25 }
wirelessSensorPodStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the wireless pod sensor. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of
the specific alarm conditions listed below. The bit will be '1' if
the condition is present, and '0' if the condition is not present.
Bit Hex. Value Description
1 0x0001 Maximum temperature exceeded.
2 0x0002 High temperature exceeded.
3 0x0004 Low temperature exceeded.
4 0x0008 Minimum temperature exceeded.
5 0x0010 Maximum humidity exceeded.
6 0x0020 High humidity exceeded.
7 0x0040 Low humidity exceeded.
8 0x0080 Minimum humidity exceeded.
9 0x0100 Low battery exceeded.
10 0x0200 Minimum battery exceeded.
11 0x0400 Low signal strength exceeded.
12 0x0800 Minimum signal strength exceeded.
13 0x1000 Sensor inactive.
14 0x2000 Dry contact in Critical state.
15 0x4000 Dry contact in warning state."
::= { wirelessSensorPodStatusEntry 26 }
-- Sensor Config Table
wirelessSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WirelessSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { wirelessSensorConfig 1 }
wirelessSensorConfigEntry OBJECT-TYPE
SYNTAX WirelessSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to configure."
INDEX { wirelessSensorConfigIndex }
::= { wirelessSensorConfigTable 1 }
WirelessSensorConfigEntry ::=
SEQUENCE {
wirelessSensorConfigIndex INTEGER,
wirelessSensorConfigName DisplayString,
wirelessSensorConfigAlarmGeneration INTEGER,
wirelessSensorConfigHighTempThresh INTEGER,
wirelessSensorConfigLowTempThresh INTEGER,
wirelessSensorConfigHighHumidityThresh INTEGER,
wirelessSensorConfigLowHumidityThresh INTEGER,
wirelessSensorConfigMaxTempThresh INTEGER,
wirelessSensorConfigMinTempThresh INTEGER,
wirelessSensorConfigMaxHumidityThresh INTEGER,
wirelessSensorConfigMinHumidityThresh INTEGER,
wirelessSensorConfigLowBatteryThresh INTEGER,
wirelessSensorConfigMinBatteryThresh INTEGER,
wirelessSensorConfigLowRssiThresh INTEGER,
wirelessSensorConfigMinRssiThresh INTEGER,
wirelessSensorConfigLocation DisplayString
}
wirelessSensorConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the entry."
::= { wirelessSensorConfigEntry 1 }
wirelessSensorConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user-defined wireless sensor ID string."
::= { wirelessSensorConfigEntry 2 }
wirelessSensorConfigAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation for this sensor."
::= { wirelessSensorConfigEntry 3 }
wirelessSensorConfigHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorConfigEntry 4 }
wirelessSensorConfigLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorConfigEntry 5 }
wirelessSensorConfigHighHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorConfigEntry 6 }
wirelessSensorConfigLowHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorConfigEntry 7 }
wirelessSensorConfigMaxTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorConfigEntry 8 }
wirelessSensorConfigMinTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorConfigEntry 9 }
wirelessSensorConfigMaxHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorConfigEntry 10 }
wirelessSensorConfigMinHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorConfigEntry 11 }
wirelessSensorConfigLowBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorConfigEntry 12 }
wirelessSensorConfigMinBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorConfigEntry 13 }
wirelessSensorConfigLowRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorConfigEntry 14 }
wirelessSensorConfigMinRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorConfigEntry 15 }
wirelessSensorConfigLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the location of the
wireless sensor. Maximum text input is 20 characters."
::= { wirelessSensorConfigEntry 16 }
-- Sensor pod config Table
wirelessSensorPodConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WirelessSensorPodConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { wirelessSensorPodConfig 1 }
wirelessSensorPodConfigEntry OBJECT-TYPE
SYNTAX WirelessSensorPodConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to configure."
INDEX { wirelessSensorPodConfigIndex, wirelessSensorPodConfigPortIndex }
::= { wirelessSensorPodConfigTable 1 }
WirelessSensorPodConfigEntry ::=
SEQUENCE {
wirelessSensorPodConfigIndex INTEGER,
wirelessSensorPodConfigPortIndex INTEGER,
wirelessSensorPodConfigName DisplayString,
wirelessSensorPodConfigAlarmGeneration INTEGER,
wirelessSensorPodConfigDryContactNormalState INTEGER,
wirelessSensorPodConfigHighTempThresh INTEGER,
wirelessSensorPodConfigLowTempThresh INTEGER,
wirelessSensorPodConfigHighHumidityThresh INTEGER,
wirelessSensorPodConfigLowHumidityThresh INTEGER,
wirelessSensorPodConfigMaxTempThresh INTEGER,
wirelessSensorPodConfigMinTempThresh INTEGER,
wirelessSensorPodConfigMaxHumidityThresh INTEGER,
wirelessSensorPodConfigMinHumidityThresh INTEGER,
wirelessSensorPodConfigLowBatteryThresh INTEGER,
wirelessSensorPodConfigMinBatteryThresh INTEGER,
wirelessSensorPodConfigLowRssiThresh INTEGER,
wirelessSensorPodConfigMinRssiThresh INTEGER,
wirelessSensorPodConfigLocation DisplayString
}
wirelessSensorPodConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the entry."
::= { wirelessSensorPodConfigEntry 1 }
wirelessSensorPodConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor pod port index."
::= { wirelessSensorPodConfigEntry 2 }
wirelessSensorPodConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the sensor pod."
::= { wirelessSensorPodConfigEntry 3 }
wirelessSensorPodConfigAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable alarm generation for this sensor."
::= { wirelessSensorPodConfigEntry 4 }
wirelessSensorPodConfigDryContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyOpen (0),
normallyClosed (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the dry contact. If the normal state is closed,
the normallyClosed (1) value will be returned. If the normal state is open,
the normallyOpen (0) value will be returned. Setting this variable will change
the normal state of the dry contact."
::= { wirelessSensorPodConfigEntry 5 }
wirelessSensorPodConfigHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodConfigEntry 6 }
wirelessSensorPodConfigLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodConfigEntry 7 }
wirelessSensorPodConfigHighHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodConfigEntry 8 }
wirelessSensorPodConfigLowHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodConfigEntry 9 }
wirelessSensorPodConfigMaxTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodConfigEntry 10 }
wirelessSensorPodConfigMinTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { wirelessSensorPodConfigEntry 11 }
wirelessSensorPodConfigMaxHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodConfigEntry 12 }
wirelessSensorPodConfigMinHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodConfigEntry 13 }
wirelessSensorPodConfigLowBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorPodConfigEntry 14 }
wirelessSensorPodConfigMinBatteryThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are displayed in tenths of Volts DC."
::= { wirelessSensorPodConfigEntry 15 }
wirelessSensorPodConfigLowRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodConfigEntry 16 }
wirelessSensorPodConfigMinRssiThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Values are represented in whole number percentage."
::= { wirelessSensorPodConfigEntry 17 }
wirelessSensorPodConfigLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A user-defined string identifying the location of the
wireless pod sensor. Maximum text input is 20 characters."
::= { wirelessSensorPodConfigEntry 18 }
-- Integrated Environmental Monitor (IEM)
iemIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the Integrated Environmental
Monitor."
::= { iemIdent 1 }
iemConfigProbesNumProbes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of temperature and humidity probes available."
::= { iemConfig 1 }
iemConfigProbesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IemConfigProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of probes supported by the Environmental Monitor
and their configurations."
::= { iemConfig 2 }
iemConfigProbesEntry OBJECT-TYPE
SYNTAX IemConfigProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Environmental Monitor probe configurations."
INDEX { iemConfigProbeNumber }
::= { iemConfigProbesTable 1 }
IemConfigProbesEntry ::=
SEQUENCE {
iemConfigProbeNumber
INTEGER,
iemConfigProbeName
DisplayString,
iemConfigProbeHighTempThreshold
INTEGER,
iemConfigProbeLowTempThreshold
INTEGER,
iemConfigProbeTempUnits
INTEGER,
iemConfigProbeHighHumidThreshold
INTEGER,
iemConfigProbeLowHumidThreshold
INTEGER,
iemConfigProbeHighTempEnable
INTEGER,
iemConfigProbeLowTempEnable
INTEGER,
iemConfigProbeHighHumidEnable
INTEGER,
iemConfigProbeLowHumidEnable
INTEGER,
iemConfigProbeMaxTempThreshold
INTEGER,
iemConfigProbeMinTempThreshold
INTEGER,
iemConfigProbeMaxHumidThreshold
INTEGER,
iemConfigProbeMinHumidThreshold
INTEGER,
iemConfigProbeMaxTempEnable
INTEGER,
iemConfigProbeMinTempEnable
INTEGER,
iemConfigProbeMaxHumidEnable
INTEGER,
iemConfigProbeMinHumidEnable
INTEGER,
iemConfigProbeTempHysteresis
INTEGER,
iemConfigProbeHumidHysteresis
INTEGER,
iemConfigProbeLocation
DisplayString
}
iemConfigProbeNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to a Environmental Monitor probe entry."
::= { iemConfigProbesEntry 1 }
iemConfigProbeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for the probe set by the user,
possibly denoting its location or purpose."
::= { iemConfigProbesEntry 2 }
iemConfigProbeHighTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature alarm threshold for the probe.
Units are displayed in the scale selected in the
'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { iemConfigProbesEntry 3 }
iemConfigProbeLowTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature alarm threshold for the probe.
Units are displayed in the scale selected in the
'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { iemConfigProbesEntry 4 }
iemConfigProbeTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { iemConfigProbesEntry 5 }
iemConfigProbeHighHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high humidity alarm threshold for the probe in
percent relative humidity."
::= { iemConfigProbesEntry 6 }
iemConfigProbeLowHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low humidity alarm threshold for the probe in
percent relative humidity."
::= { iemConfigProbesEntry 7 }
iemConfigProbeHighTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 8 }
iemConfigProbeLowTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 9 }
iemConfigProbeHighHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 10 }
iemConfigProbeLowHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 11 }
iemConfigProbeMaxTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximun temperature alarm threshold for the probe.
Units are displayed in the scale selected in the
'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { iemConfigProbesEntry 12 }
iemConfigProbeMinTempThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimun temperature alarm threshold for the probe.
Units are displayed in the scale selected in the
'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { iemConfigProbesEntry 13 }
iemConfigProbeMaxHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum humidity alarm threshold for the probe in
percent relative humidity."
::= { iemConfigProbesEntry 14 }
iemConfigProbeMinHumidThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum humidity alarm threshold for the probe in
percent relative humidity."
::= { iemConfigProbesEntry 15 }
iemConfigProbeMaxTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 16 }
iemConfigProbeMinTempEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 17 }
iemConfigProbeMaxHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 18 }
iemConfigProbeMinHumidEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum humidity alarm enable/disable for the
probe. No alarm will be generated if this value
is set to disabled(1). The alarm will be
generated if this value is set to enabled(2) and
the threshold has been violated."
::= { iemConfigProbesEntry 19 }
iemConfigProbeTempHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of degrees beyond the temperature thresholds
at which an active temperature alarm will be cleared.
This configuration setting applies to all temperature
thresholds.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { iemConfigProbesEntry 20 }
iemConfigProbeHumidHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of percent RH points beyond the humidity
thresholds at which an active humidity alarm will be
cleared. This configuration setting applies to all
humidity thresholds.
Units are displayed in the scale selected in
the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
::= { iemConfigProbesEntry 21 }
iemConfigProbeLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string describing the location of the probe."
::= { iemConfigProbesEntry 22 }
iemConfigContactsNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts available on the Environmental
Monitor."
::= { iemConfig 3 }
iemConfigContactsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IemConfigContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the Environmental Monitor
and their configurations."
::= { iemConfig 4 }
iemConfigContactsEntry OBJECT-TYPE
SYNTAX IemConfigContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Environmental Monitor contact configurations."
INDEX { iemConfigContactNumber }
::= { iemConfigContactsTable 1 }
IemConfigContactsEntry ::=
SEQUENCE {
iemConfigContactNumber
INTEGER,
iemConfigContactName
DisplayString,
iemConfigContactEnable
INTEGER,
iemConfigContactSeverity
INTEGER,
iemConfigContactNormalState
INTEGER,
iemConfigContactLocation
DisplayString
}
iemConfigContactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an Environmental Monitor contact."
::= { iemConfigContactsEntry 1 }
iemConfigContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for the Environmental Monitor contact
set by the user, possibly denoting its location or purpose."
::= { iemConfigContactsEntry 2 }
iemConfigContactEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An Environmental Monitor contact alarm enable/disable."
::= { iemConfigContactsEntry 3 }
iemConfigContactSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severtity of the alarm that will be triggered when
the input contact is activated. The alarms can be
critical(1), warning(2) or informational(3).
NOTE: informational(3) is deprecated (and no longer valid) for this OID."
::= { iemConfigContactsEntry 4 }
iemConfigContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
open(1),
closed(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contact state that will be considered normal, i.e.
will not trigger an alarm. The states are open(1) or
closed(2)."
::= { iemConfigContactsEntry 5 }
iemConfigContactLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive label for the contact denoting its
location or purpose."
::= { iemConfigContactsEntry 6 }
iemConfigConfigRelaysNumRelays OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output relays supported by the Environmental
Monitor."
::= { iemConfig 5 }
iemConfigRelaysTable OBJECT-TYPE
SYNTAX SEQUENCE OF IemConfigRelaysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output relays supported by the Environmental Monitor
and their configurations."
::= { iemConfig 6 }
iemConfigRelaysEntry OBJECT-TYPE
SYNTAX IemConfigRelaysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Environmental Monitor output relay configurations."
INDEX { iemConfigRelayNumber }
::= { iemConfigRelaysTable 1 }
IemConfigRelaysEntry ::=
SEQUENCE {
iemConfigRelayNumber
INTEGER,
iemConfigRelayName
DisplayString,
iemConfigRelayNormalState
INTEGER,
iemConfigRelayFaultCondition
INTEGER
}
iemConfigRelayNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an Environmental Monitor output relay."
::= { iemConfigRelaysEntry 1 }
iemConfigRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name of an Environmental Monitor output relay,
set by the user, describing its location or purpose."
::= { iemConfigRelaysEntry 2 }
iemConfigRelayNormalState OBJECT-TYPE
SYNTAX INTEGER {
open(1),
closed(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state (non-fault state) of an Environmental
Monitor output relay, either open(1) or closed(2)."
::= { iemConfigRelaysEntry 3 }
iemConfigRelayFaultCondition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The fault condition used to activate the output relay."
::= { iemConfigRelaysEntry 4 }
iemStatusProbesNumProbes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of available probes on the Environmental
Monitor."
::= { iemStatus 1 }
iemStatusProbesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IemStatusProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of probes supported by the Environmental Monitor
and their status."
::= { iemStatus 2 }
iemStatusProbesEntry OBJECT-TYPE
SYNTAX IemStatusProbesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of the probe."
INDEX { iemStatusProbeNumber }
::= { iemStatusProbesTable 1 }
IemStatusProbesEntry ::=
SEQUENCE {
iemStatusProbeNumber
INTEGER,
iemStatusProbeName
DisplayString,
iemStatusProbeStatus
INTEGER,
iemStatusProbeCurrentTemp
INTEGER,
iemStatusProbeTempUnits
INTEGER,
iemStatusProbeCurrentHumid
INTEGER,
iemStatusProbeHighTempViolation
INTEGER,
iemStatusProbeLowTempViolation
INTEGER,
iemStatusProbeHighHumidViolation
INTEGER,
iemStatusProbeLowHumidViolation
INTEGER,
iemStatusProbeMaxTempViolation
INTEGER,
iemStatusProbeMinTempViolation
INTEGER,
iemStatusProbeMaxHumidViolation
INTEGER,
iemStatusProbeMinHumidViolation
INTEGER,
iemStatusProbeLocation
DisplayString
}
iemStatusProbeNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the probe."
::= { iemStatusProbesEntry 1 }
iemStatusProbeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A descriptive name for the probe set by the user."
::= { iemStatusProbesEntry 2 }
iemStatusProbeStatus OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
connected(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The connected status of the probe, either
disconnected(1) or connected(2)."
::= { iemStatusProbesEntry 3 }
iemStatusProbeCurrentTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current temperature reading from the probe displayed
in the units shown in the 'iemStatusProbeTempUnits' OID
(Celsius or Fahrenheit)."
::= { iemStatusProbesEntry 4 }
iemStatusProbeTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { iemStatusProbesEntry 5 }
iemStatusProbeCurrentHumid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current humidity reading from the probe in percent
relative humidity."
::= { iemStatusProbesEntry 6 }
iemStatusProbeHighTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
highTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high temperature violation status of the probe
temperature reading. This OID will show a highTempViolation(2)
if the current temperature reading shown in the
'iemStatusProbeCurrentTemp' OID is greater than or equal to
the high temperature threshold value, the
'iemConfigProbeHighTempThreshold' OID, and the value of the
'iemConfigProbeHighTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'iemConfigProbeHighTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { iemStatusProbesEntry 7 }
iemStatusProbeLowTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
lowTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high temperature violation status of the probe
temperature reading. This OID will show a lowTempViolation(2)
if the current temperature reading shown in the
'iemStatusProbeCurrentTemp' OID is less than or equal to
the low temperature threshold value, the
'iemConfigProbeLowTempThreshold' OID, and the value of the
'iemPConfigrobeLowTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'iemConfigProbeLowTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { iemStatusProbesEntry 8 }
iemStatusProbeHighHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
highHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high humidity violation status of the probe humidity
reading. This OID will show a highTempViolation(2)
if the current humidity reading shown in the
'iemStatusProbeCurrentHumid' OID is greater than or equal to
the high humidity threshold value, the
'iemConfigProbeHighHumidThreshold' OID, and the value of the
'iemConfigProbeHighHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'iemConfigProbeHighHumidEnable' OID is
disabled, this OID will show disabled(3)."
::= { iemStatusProbesEntry 9 }
iemStatusProbeLowHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
lowHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The low humidity violation status of the probe humidity
reading. This OID will show a lowTempViolation(2)
if the current humidity reading shown in the
'iemStatusProbeCurrentHumid' OID is less than or equal to
the low humidity threshold value, the
'iemConfigProbeLowHumidThreshold' OID, and the value of the
'iemConfigProbeLowHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'iemConfigProbeLowHumidEnable' OID is
disabled, this OID will show disabled(3)."
::= { iemStatusProbesEntry 10 }
iemStatusProbeMaxTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
maxTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The max temperature violation status of the probe
temperature reading. This OID will show a maxTempViolation(2)
if the current temperature reading shown in the
'iemStatusProbeCurrentTemp' OID is greater than or equal to
the maximun temperature threshold value, the
'iemConfigProbeMaxTempThreshold' OID, and the value of the
'iemConfigProbeMaxTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'iemConfigProbeMaxTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { iemStatusProbesEntry 11 }
iemStatusProbeMinTempViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
minTempViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum temperature violation status of the probe
temperature reading. This OID will show a minTempViolation(2)
if the current temperature reading shown in the
'iemStatusProbeCurrentTemp' OID is less than or equal to
the minimum temperature threshold value, the
'iemConfigProbeMinTempThreshold' OID, and the value of the
'iemConfigProbeMinTempEnable' OID is enabled. Otherwise it will show
noViolation(1). If the 'iemConfigProbeMinTempEnable' OID is disabled,
this OID will show disabled(3)."
::= { iemStatusProbesEntry 12 }
iemStatusProbeMaxHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
maxHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum humidity violation status of the probe humidity
reading. This OID will show a maxTempViolation(2)
if the current humidity reading shown in the
'iemStatusProbeCurrentHumid' OID is greater than or equal to
the maximum humidity threshold value, the
'iemConfigProbeMaxHumidThreshold' OID, and the value of the
'iemConfigProbeMaxHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'iemConfigProbeMaxHumidEnable' OID is
disabled, this OID will show disabled(3)"
::= { iemStatusProbesEntry 13 }
iemStatusProbeMinHumidViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
minHumidViolation(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum humidity violation status of the probe humidity
reading. This OID will show a minTempViolation(2)
if the current humidity reading shown in the
'iemStatusProbeCurrentHumid' OID is less than or equal to
the minimum humidity threshold value, the
'iemConfigProbeMinHumidThreshold' OID, and the value of the
'iemConfigProbeMinHumidEnable' OID is enabled. Otherwise it will
show noViolation(1). If the 'iemConfigProbeMinHumidEnable' OID is
disabled, this OID will show disabled(3)."
::= { iemStatusProbesEntry 14 }
iemStatusProbeLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A descriptive location for the probe set by the user."
::= { iemStatusProbesEntry 15 }
iemStatusContactsNumContacts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contacts supported on the
Environmental Monitor."
::= { iemStatus 3 }
iemStatusContactsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IemStatusContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of contacts supported by the Environmental Monitor
and their status."
::= { iemStatus 4 }
iemStatusContactsEntry OBJECT-TYPE
SYNTAX IemStatusContactsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of the contact."
INDEX { iemStatusContactNumber }
::= { iemStatusContactsTable 1 }
IemStatusContactsEntry ::=
SEQUENCE {
iemStatusContactNumber
INTEGER,
iemStatusContactName
DisplayString,
iemStatusContactStatus
INTEGER
}
iemStatusContactNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the Environmental Monitor contact."
::= { iemStatusContactsEntry 1 }
iemStatusContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A descriptive name for the Environmental Monitor contact
set by the user, denoting its location or purpose."
::= { iemStatusContactsEntry 2 }
iemStatusContactStatus OBJECT-TYPE
SYNTAX INTEGER {
noFault(1),
fault(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Environmental Monitor contact. The status
will show noFault(1) if the contact is in the normal state
and the 'iemConfigContactEnable' OID is enabled. The status will
show a fault(2) if the contact is faulted and the
'iemConfigContactEnable' OID is enabled. If the
'iemConfigContactEnable' OID is disabled, the status will show
disabled(3)."
::= { iemStatusContactsEntry 3 }
iemStatusRelaysNumRelays OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output relays supported on the
Environmental Monitor."
::= { iemStatus 6 }
iemStatusRelaysTable OBJECT-TYPE
SYNTAX SEQUENCE OF IemStatusRelaysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output relays supported by the
Environmental Monitor and their status."
::= { iemStatus 7 }
iemStatusRelaysEntry OBJECT-TYPE
SYNTAX IemStatusRelaysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of the relay."
INDEX { iemStatusRelayNumber }
::= { iemStatusRelaysTable 1 }
IemStatusRelaysEntry ::=
SEQUENCE {
iemStatusRelayNumber
INTEGER,
iemStatusRelayName
DisplayString,
iemStatusRelayStatus
INTEGER
}
iemStatusRelayNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { iemStatusRelaysEntry 1 }
iemStatusRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A descriptive name for the output relay set by the
user, denoting its location or purpose."
::= { iemStatusRelaysEntry 2 }
iemStatusRelayStatus OBJECT-TYPE
SYNTAX INTEGER {
faultState(1),
normalState(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the output relay, either faultState(1) or
normalState(2)."
::= { iemStatusRelaysEntry 3 }
-- Environmental Management System (EMS)
-- EMS IDENT
emsIdentEMSName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
device. "
::= { emsIdent 1 }
emsIdentProductNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of
the device. This value is set at the factory."
::= { emsIdent 2 }
emsIdentFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision of the device."
::= { emsIdent 3 }
emsIdentHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the device.
This value is set at the factory."
::= { emsIdent 4 }
emsIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the device was manufactured in mm/dd/yyyy format.
This value is set at the factory. "
::= { emsIdent 5 }
emsIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of
the device. This value is set at the factory."
::= { emsIdent 6 }
-- EMS CONTROL
-- EMS OUTPUT RELAY CONTROL STATUS TABLE
emsOutputRelayControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsOutputRelayControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual output relays. The number of
entries is contained in the emsStatusOutputRelayCount OID."
::= { emsOutputRelayControl 1 }
emsOutputRelayControlEntry OBJECT-TYPE
SYNTAX EmsOutputRelayControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relays to control."
INDEX { emsOutputRelayControlOutputRelayIndex }
::= { emsOutputRelayControlTable 1 }
EmsOutputRelayControlEntry ::=
SEQUENCE {
emsOutputRelayControlOutputRelayIndex INTEGER,
emsOutputRelayControlOutputRelayName DisplayString,
emsOutputRelayControlOutputRelayCommand INTEGER
}
emsOutputRelayControlOutputRelayIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the output relay entry."
::= { emsOutputRelayControlEntry 1 }
emsOutputRelayControlOutputRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the output relay.
This OID is provided for informational purposes only."
::= { emsOutputRelayControlEntry 2 }
emsOutputRelayControlOutputRelayCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateCloseEMS (1),
immediateOpenEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the output relay state. If
the output relay is closed, the immediateCloseEMS (1) value will be returned.
If the output relay is open, the immediateOpenEMS (2) value will be
returned.
Setting this variable to immediateCloseEMS (1) will immediately close the relay.
Setting this variable to immediateOpenEMS (2) will immediately open the relay."
::= { emsOutputRelayControlEntry 3 }
-- EMS OUTLET CONTROL TABLE
emsOutletControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual outlet switches. The number of
entries is contained in the emsStatusOutletCount OID."
::= { emsOutletControl 1 }
emsOutletControlEntry OBJECT-TYPE
SYNTAX EmsOutletControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to control."
INDEX { emsOutletControlOutletIndex }
::= { emsOutletControlTable 1 }
EmsOutletControlEntry ::=
SEQUENCE {
emsOutletControlOutletIndex INTEGER,
emsOutletControlOutletName DisplayString,
emsOutletControlOutletCommand INTEGER
}
emsOutletControlOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { emsOutletControlEntry 1 }
emsOutletControlOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet.
This OID is provided for informational purposes only."
::= { emsOutletControlEntry 2 }
emsOutletControlOutletCommand OBJECT-TYPE
SYNTAX INTEGER {
immediateOnEMS (1),
immediateOffEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the outlet state. If
the outlet is on, the immediateOnEMS (1) value will be returned.
If the outlet is off, the immediateOffEMS (2) value will be
returned.
Setting this variable to immediateOnEMS (1) will immediately turn the outlet on.
Setting this variable to immediateOffEMS (2) will immediately turn the outlet off."
::= { emsOutletControlEntry 3 }
-- EMS SENSOR CONTROL TABLE
emsSensorControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSSensorControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control/reset of individual sensors. The number of
entries is contained in the emsStatusSensorCount OID."
::= { emsSensorControl 1 }
emsSensorControlEntry OBJECT-TYPE
SYNTAX EMSSensorControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to control/reset."
INDEX { emsSensorControlSensorIndex }
::= { emsSensorControlTable 1 }
EMSSensorControlEntry ::=
SEQUENCE {
emsSensorControlSensorIndex INTEGER,
emsSensorControlSensorSystemName DisplayString,
emsSensorControlSensorUserName DisplayString,
emsSensorControlSensorCommand INTEGER
}
emsSensorControlSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsSensorControlEntry 1 }
emsSensorControlSensorSystemName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system name of the sensor. This describes the hardware system
intent of this sensor."
::= { emsSensorControlEntry 2 }
emsSensorControlSensorUserName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the sensor as given by the system user."
::= { emsSensorControlEntry 3 }
emsSensorControlSensorCommand OBJECT-TYPE
SYNTAX INTEGER {
noCommandEMS (1),
resetCommandEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return noCommandEMS(1).
Setting this variable to resetCommandEMS(2) will issue a reset command to the
sensor. Some sensors cannot be manually reset and will not be affected
by this command."
::= { emsSensorControlEntry 4 }
-- EMS ALARM DEVICE CONTROL TABLE
emsAlarmDeviceControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsAlarmDeviceControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for control of individual alarm devices.
Note: Some alarm devices are not controllable. The number of
entries is contained in the emsStatusAlarmDeviceCount OID."
::= { emsAlarmDeviceControl 1 }
emsAlarmDeviceControlEntry OBJECT-TYPE
SYNTAX EmsAlarmDeviceControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The alarm devices to control."
INDEX { emsAlarmDeviceControlDeviceIndex }
::= { emsAlarmDeviceControlTable 1 }
EmsAlarmDeviceControlEntry ::=
SEQUENCE {
emsAlarmDeviceControlDeviceIndex INTEGER,
emsAlarmDeviceControlDeviceName DisplayString,
emsAlarmDeviceControlDeviceCommand INTEGER
}
emsAlarmDeviceControlDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the alarm device entry."
::= { emsAlarmDeviceControlEntry 1 }
emsAlarmDeviceControlDeviceName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the alarm device.
This OID is provided for informational purposes only."
::= { emsAlarmDeviceControlEntry 2 }
emsAlarmDeviceControlDeviceCommand OBJECT-TYPE
SYNTAX INTEGER {
alarmDeviceOnEMS (1),
alarmDeviceOffEMS (2),
alarmDeviceNotInstalledEMS (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the device state. If
the device is active, the alarmDeviceOnEMS (1) value will be returned.
If the device is inactive, the alarmDeviceOffEMS (2) value will be
returned. If the device is not installed, the
alarmDeviceNotInstalledEMS (3) value will be returned.
Actions resulting from setting this variable are device-dependent.
Setting this variable to alarmDeviceOnEMS (1) will turn that device (ex. Beacon) on.
Setting this variable to alarmDeviceOffEMS (2) will turn that device off."
::= { emsAlarmDeviceControlEntry 3 }
-- EMS CONFIG
emsConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the device."
::= { emsConfig 1 }
emsConfigCheckLogLight OBJECT-TYPE
SYNTAX INTEGER {
lightDisabled (1),
lightOnInformational (2),
lightOnWarning (3),
lightOnSevere (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The setting of this OID determines the level of event that will
trigger the check-log light on the EMS. This is not available on the EMU2.
lightDisabled (1) disables the check-log light.
lightOnInformational (2) lights check-log for any event of
informational severity or above.
lightOnWarning (3) lights check-log for any event of
warning severity or above.
lightOnSevere (4) lights check-log for any event of severe severity."
::= { emsConfig 2 }
-- EMS PROBE CONFIG TABLE
emsProbeConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSProbeConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual probes. The number of
entries is contained in the emsStatusProbeCount OID."
::= { emsProbeConfig 1 }
emsProbeConfigEntry OBJECT-TYPE
SYNTAX EMSProbeConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The probes to configure."
INDEX { emsProbeConfigProbeIndex }
::= { emsProbeConfigTable 1 }
EMSProbeConfigEntry ::=
SEQUENCE {
emsProbeConfigProbeIndex INTEGER,
emsProbeConfigProbeName DisplayString,
emsProbeConfigProbeHighTempThresh INTEGER,
emsProbeConfigProbeLowTempThresh INTEGER,
emsProbeConfigProbeHighHumidityThresh INTEGER,
emsProbeConfigProbeLowHumidityThresh INTEGER,
emsProbeConfigProbeMaxTempThresh INTEGER,
emsProbeConfigProbeMinTempThresh INTEGER,
emsProbeConfigProbeDeltaTemp INTEGER,
emsProbeConfigProbeMaxHumidityThresh INTEGER,
emsProbeConfigProbeMinHumidityThresh INTEGER,
emsProbeConfigProbeDeltaHumidity INTEGER,
emsProbeConfigProbeSTIncTempVariance INTEGER,
emsProbeConfigProbeSTIncTempTime INTEGER,
emsProbeConfigProbeSTDecTempVariance INTEGER,
emsProbeConfigProbeSTDecTempTime INTEGER,
emsProbeConfigProbeLTIncTempVariance INTEGER,
emsProbeConfigProbeLTIncTempTime INTEGER,
emsProbeConfigProbeLTDecTempVariance INTEGER,
emsProbeConfigProbeLTDecTempTime INTEGER,
emsProbeConfigProbeMaxVoltThresh INTEGER,
emsProbeConfigProbeMinVoltThresh INTEGER
}
emsProbeConfigProbeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the probe entry."
::= { emsProbeConfigEntry 1 }
emsProbeConfigProbeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the probe."
::= { emsProbeConfigEntry 2 }
emsProbeConfigProbeHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe high temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 3 }
emsProbeConfigProbeLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe low temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 4 }
emsProbeConfigProbeHighHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe high humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeConfigEntry 5 }
emsProbeConfigProbeLowHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe low humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeConfigEntry 6 }
emsProbeConfigProbeMaxTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe maximum temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 7 }
emsProbeConfigProbeMinTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe minimum temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 8 }
emsProbeConfigProbeDeltaTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe delta temperature.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 9 }
emsProbeConfigProbeMaxHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe maximum humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeConfigEntry 10 }
emsProbeConfigProbeMinHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe minimum humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeConfigEntry 11 }
emsProbeConfigProbeDeltaHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe delta humidity.
Values are represented in whole number percentage."
::= { emsProbeConfigEntry 12 }
emsProbeConfigProbeSTIncTempVariance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe short-term increasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 13 }
emsProbeConfigProbeSTIncTempTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe short-term increasing temperature time used for rate of change alarms.
Values are represented in whole number minutes."
::= { emsProbeConfigEntry 14 }
emsProbeConfigProbeSTDecTempVariance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe short-term decreasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 15 }
emsProbeConfigProbeSTDecTempTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe short-term decreasing temperature time used for rate of change alarms.
Values are represented in whole number minutes."
::= { emsProbeConfigEntry 16 }
emsProbeConfigProbeLTIncTempVariance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe long-term increasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 17 }
emsProbeConfigProbeLTIncTempTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe long-term increasing temperature time used for rate of change alarms.
Values are represented in whole number hours."
::= { emsProbeConfigEntry 18 }
emsProbeConfigProbeLTDecTempVariance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe long-term decreasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeConfigEntry 19 }
emsProbeConfigProbeLTDecTempTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe long-term decreasing temperature time used for rate of change alarms.
Values are represented in whole number hours."
::= { emsProbeConfigEntry 20 }
emsProbeConfigProbeMaxVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe maximum voltage threshold in Volts."
::= { emsProbeConfigEntry 21 }
emsProbeConfigProbeMinVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Probe minimum voltage threshold in Volts."
::= { emsProbeConfigEntry 22 }
-- EMS INPUT CONTACT CONFIG STATUS TABLE
emsInputContactConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSInputContactConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual input contacts. The number of
entries is contained in the emsStatusInputContactCount OID."
::= { emsInputContactConfig 1 }
emsInputContactConfigEntry OBJECT-TYPE
SYNTAX EMSInputContactConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contacts to configure."
INDEX { emsInputContactConfigInputContactIndex }
::= { emsInputContactConfigTable 1 }
EMSInputContactConfigEntry ::=
SEQUENCE {
emsInputContactConfigInputContactIndex INTEGER,
emsInputContactConfigInputContactName DisplayString,
emsInputContactConfigInputContactNormalState INTEGER
}
emsInputContactConfigInputContactIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the input contact entry."
::= { emsInputContactConfigEntry 1 }
emsInputContactConfigInputContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the input contact."
::= { emsInputContactConfigEntry 2 }
emsInputContactConfigInputContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyClosedEMS (1),
normallyOpenEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the input contact. If
the normal state is closed, the normallyClosedEMS (1) value will be returned.
If the normal state is closed, the normallyOpenEMS (2) value will be
returned.
Setting this variable will change the normal state of the input contact"
::= { emsInputContactConfigEntry 3 }
-- EMS OUTPUT RELAY CONFIG STATUS TABLE
emsOutputRelayConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSOutputRelayConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual output relays. The number of
entries is contained in the emsStatusOutputRelayCount OID."
::= { emsOutputRelayConfig 1 }
emsOutputRelayConfigEntry OBJECT-TYPE
SYNTAX EMSOutputRelayConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relays to configure."
INDEX { emsOutputRelayConfigOutputRelayIndex }
::= { emsOutputRelayConfigTable 1 }
EMSOutputRelayConfigEntry ::=
SEQUENCE {
emsOutputRelayConfigOutputRelayIndex INTEGER,
emsOutputRelayConfigOutputRelayName DisplayString,
emsOutputRelayConfigOutputRelayNormalState INTEGER
}
emsOutputRelayConfigOutputRelayIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the output relay entry."
::= { emsOutputRelayConfigEntry 1 }
emsOutputRelayConfigOutputRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the output relay."
::= { emsOutputRelayConfigEntry 2 }
emsOutputRelayConfigOutputRelayNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyClosedEMS (1),
normallyOpenEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the output relay. If
the normal state is closed, the normallyClosedEMS (1) value will be returned.
If the normal state is closed, the normallyOpenEMS (2) value will be
returned.
Setting this variable will change the normal state of the output relay"
::= { emsOutputRelayConfigEntry 3 }
-- EMS OUTLET CONFIG TABLE
emsOutletConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual outlets. The number of
entries is contained in the emsStatusOutletCount OID."
::= { emsOutletConfig 1 }
emsOutletConfigEntry OBJECT-TYPE
SYNTAX EMSOutletConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to configure."
INDEX { emsOutletConfigOutletIndex }
::= { emsOutletConfigTable 1 }
EMSOutletConfigEntry ::=
SEQUENCE {
emsOutletConfigOutletIndex INTEGER,
emsOutletConfigOutletName DisplayString,
emsOutletConfigOutletNormalState INTEGER
}
emsOutletConfigOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { emsOutletConfigEntry 1 }
emsOutletConfigOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the outlet."
::= { emsOutletConfigEntry 2 }
emsOutletConfigOutletNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyOnEMS (1),
normallyOffEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the outlet. If
the normal state is on, the normallyOnEMS (1) value will be returned.
If the normal state is off, the normallyOffEMS (2) value will be
returned.
Setting this variable will change the normal state of the outlet"
::= { emsOutletConfigEntry 3 }
-- EMS SENSOR CONFIG TABLE
emsSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of individual sensors. The number of
entries is contained in the emsStatusSensorCount OID."
::= { emsSensorConfig 1 }
emsSensorConfigEntry OBJECT-TYPE
SYNTAX EMSSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { emsSensorConfigSensorIndex }
::= { emsSensorConfigTable 1 }
EMSSensorConfigEntry ::=
SEQUENCE {
emsSensorConfigSensorIndex INTEGER,
emsSensorConfigSensorSystemName DisplayString,
emsSensorConfigSensorUserName DisplayString,
emsSensorConfigSensorNormalState INTEGER,
emsSensorConfigSensorAlarmDelay INTEGER
}
emsSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsSensorConfigEntry 1 }
emsSensorConfigSensorSystemName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system name of the sensor. This describes the hardware system
intent of this sensor."
::= { emsSensorConfigEntry 2 }
emsSensorConfigSensorUserName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the sensor as given by the system user."
::= { emsSensorConfigEntry 3 }
emsSensorConfigSensorNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyClosedEMS (1),
normallyOpenEMS (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the sensor. If
the normal state is closed, the normallyClosedEMS (1) value will be returned.
If the normal state is closed, the normallyOpenEMS (2) value will be
returned.
Setting this variable will change the normal state of the sensor. Note:
Only the AUX sensor in the EMS has a configurable Normal State"
::= { emsSensorConfigEntry 4 }
emsSensorConfigSensorAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay (in seconds) after a sensor detects an alarm condition before the
condition is reported."
::= { emsSensorConfigEntry 5 }
-- EMS STATUS
--- EMS MASTER status
emsStatusEMSName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
device. "
::= { emsStatus 1 }
emsStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
noComm(1),
comm(2),
commLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status between the agent
and the device.
noComm(1), Communication has never been established.
comm(2), Communication has been established.
commLost(3), Communication was established, but was lost."
::= { emsStatus 2 }
emsStatusProbeCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of T/H probes (both local and remote) that
is supported by this device."
::= { emsStatus 3 }
emsStatusInputContactCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Input Contacts that
is supported by this device."
::= { emsStatus 4 }
emsStatusOutputRelayCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Output Relays that
is supported by this device."
::= { emsStatus 5 }
emsStatusOutletCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AC Outlets that
is supported by this device."
::= { emsStatus 6 }
emsStatusSensorCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Sensors that
is supported by this device."
::= { emsStatus 7 }
emsStatusAlinkAruDeviceCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of remote Aru's supported by this device."
::= { emsStatus 8 }
emsStatusAlinkProbeDeviceCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of remote T/H probes supported by this device."
::= { emsStatus 9 }
emsStatusAlarmDeviceCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of alarm devices supported by this device."
::= { emsStatus 10 }
emsStatusSysTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
in the system, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { emsStatus 11 }
emsStatusCheckLogLight OBJECT-TYPE
SYNTAX INTEGER {
lightOff (1),
lightOn (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the check-log light on the device.
For the EMU2, this will always indicate lightOff(1).
lightOff (1) indicates the light is off (no new log entries).
lightOn (2) indicates the light is on (new log entries present)."
::= { emsStatus 12 }
emsStatusHardwareStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the EMS hardware. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of
a specific hardware error condition.
0 indicates there are no error conditions detected in the EMS hardware.
1 indicates a Current Limit error condition related to the Alink port.
2 indicates incorrect hardware is plugged into an EMS port.
3 indicates that both of these error conditions are present."
::= { emsStatus 13 }
-- EMS PROBE STATUS TABLE
emsProbeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSProbeStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual probes. The number of
entries is contained in the emsStatusProbeCount OID."
::= { emsProbeStatus 1 }
emsProbeStatusEntry OBJECT-TYPE
SYNTAX EMSProbeStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The probes to access."
INDEX { emsProbeStatusProbeIndex }
::= { emsProbeStatusTable 1 }
EMSProbeStatusEntry ::=
SEQUENCE {
emsProbeStatusProbeIndex INTEGER,
emsProbeStatusProbeName DisplayString,
emsProbeStatusProbeTemperature INTEGER,
emsProbeStatusProbeHighTempThresh INTEGER,
emsProbeStatusProbeLowTempThresh INTEGER,
emsProbeStatusProbeHumidity INTEGER,
emsProbeStatusProbeHighHumidityThresh INTEGER,
emsProbeStatusProbeLowHumidityThresh INTEGER,
emsProbeStatusProbeSerialNumber DisplayString,
emsProbeStatusProbeCommStatus INTEGER,
emsProbeStatusProbeAlarmStatus INTEGER,
emsProbeStatusProbeMaxTempThresh INTEGER,
emsProbeStatusProbeMinTempThresh INTEGER,
emsProbeStatusProbeMaxHumidityThresh INTEGER,
emsProbeStatusProbeMinHumidityThresh INTEGER,
emsProbeStatusProbeVoltage INTEGER,
emsProbeStatusProbeMaxVoltThresh INTEGER,
emsProbeStatusProbeMinVoltThresh INTEGER
}
emsProbeStatusProbeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the probe entry."
::= { emsProbeStatusEntry 1 }
emsProbeStatusProbeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the probe."
::= { emsProbeStatusEntry 2 }
emsProbeStatusProbeTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe temperature reading.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeStatusEntry 3 }
emsProbeStatusProbeHighTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe high temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeStatusEntry 4 }
emsProbeStatusProbeLowTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe low temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeStatusEntry 5 }
emsProbeStatusProbeHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe humidity reading.
Values are represented in whole number percentage."
::= { emsProbeStatusEntry 6 }
emsProbeStatusProbeHighHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe high humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeStatusEntry 7 }
emsProbeStatusProbeLowHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe low humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeStatusEntry 8 }
emsProbeStatusProbeSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A label indicating the type (Local[L] or Remote[R]) and Number
of the probe. For example, the first local probe would be L1 and
the third remote probe would be R3."
::= { emsProbeStatusEntry 9 }
emsProbeStatusProbeCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commsNeverDiscovered(1),
commsEstablished(2),
commsLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The state of communications to the probe.
commNeverDiscovered(1) indicates there has never been communications with this device.
commsEstablished(2) indicates communication is normal and active with this device.
commsLost(3) indicates communication had been established, but is no longer."
::= { emsProbeStatusEntry 10 }
emsProbeStatusProbeAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the probe. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of
the specific alarm conditions listed below. The bit will be '1' if
the condition is present, and '0' if the condition is not present.
Bit Hex. Value Description
1 0x0001 Maximum temperature exceeded.
2 0x0002 High temperature exceeded.
3 0x0004 Low temperature exceeded.
4 0x0008 Minimum temperature exceeded.
5 0x0010 Short-term increasing temperature rate exceeded.
6 0x0020 Short-term decreasing temperature rate exceeded.
7 0x0040 Long-term increasing temperature rate exceeded.
8 0x0080 Long-term decreasing temperature rate exceeded.
9 0x0100 Maximum humidity exceeded.
10 0x0200 High humidity exceeded.
11 0x0400 Low humidity exceeded.
12 0x0800 Minimum humidity exceeded.
13 0x1000 Maximum voltage exceeded.
14 0x2000 Minimum voltage exceeded."
::= { emsProbeStatusEntry 11 }
emsProbeStatusProbeMaxTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe maximum temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeStatusEntry 12 }
emsProbeStatusProbeMinTempThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe minimum temperature threshold.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { emsProbeStatusEntry 13 }
emsProbeStatusProbeMaxHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe maximum humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeStatusEntry 14 }
emsProbeStatusProbeMinHumidityThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe minimum humidity threshold.
Values are represented in whole number percentage."
::= { emsProbeStatusEntry 15 }
emsProbeStatusProbeVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe voltage reading.
Values are displayed in tenths of Volts DC."
::= { emsProbeStatusEntry 16 }
emsProbeStatusProbeMaxVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe maximum voltage threshold in Volts."
::= { emsProbeStatusEntry 17 }
emsProbeStatusProbeMinVoltThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Probe minimum voltage threshold in Volts."
::= { emsProbeStatusEntry 18 }
-- EMS INPUT CONTACT STATUS TABLE
emsInputContactStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSInputContactStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual input contacts. The number of
entries is contained in the emsStatusInputContactCount OID."
::= { emsInputContactStatus 1 }
emsInputContactStatusEntry OBJECT-TYPE
SYNTAX EMSInputContactStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contacts to access."
INDEX { emsInputContactStatusInputContactIndex }
::= { emsInputContactStatusTable 1 }
EMSInputContactStatusEntry ::=
SEQUENCE {
emsInputContactStatusInputContactIndex INTEGER,
emsInputContactStatusInputContactName DisplayString,
emsInputContactStatusInputContactState INTEGER,
emsInputContactStatusInputContactNormalState INTEGER
}
emsInputContactStatusInputContactIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the input contact entry."
::= { emsInputContactStatusEntry 1 }
emsInputContactStatusInputContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the input contact."
::= { emsInputContactStatusEntry 2 }
emsInputContactStatusInputContactState OBJECT-TYPE
SYNTAX INTEGER {
contactClosedEMS (1),
contactOpenEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the state of the input contact. If
the input contact is closed, the contactClosedEMS (1) value will be returned.
If the input contact state is open, the contactOpenEMS (2) value will be
returned. "
::= { emsInputContactStatusEntry 3 }
emsInputContactStatusInputContactNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyClosedEMS (1),
normallyOpenEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the input contact. If
the normal state is closed, the normallyClosedEMS (1) value will be returned.
If the normal state is open, the normallyOpenEMS (2) value will be
returned. "
::= { emsInputContactStatusEntry 4 }
-- EMS OUTPUT RELAY STATUS TABLE
emsOutputRelayStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSOutputRelayStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual output relays. The number of
entries is contained in the emsStatusOutputRelayCount OID."
::= { emsOutputRelayStatus 1 }
emsOutputRelayStatusEntry OBJECT-TYPE
SYNTAX EMSOutputRelayStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relays to access."
INDEX { emsOutputRelayStatusOutputRelayIndex }
::= { emsOutputRelayStatusTable 1 }
EMSOutputRelayStatusEntry ::=
SEQUENCE {
emsOutputRelayStatusOutputRelayIndex INTEGER,
emsOutputRelayStatusOutputRelayName DisplayString,
emsOutputRelayStatusOutputRelayState INTEGER,
emsOutputRelayStatusOutputRelayNormalState INTEGER
}
emsOutputRelayStatusOutputRelayIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the output relay entry."
::= { emsOutputRelayStatusEntry 1 }
emsOutputRelayStatusOutputRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the output relay."
::= { emsOutputRelayStatusEntry 2 }
emsOutputRelayStatusOutputRelayState OBJECT-TYPE
SYNTAX INTEGER {
relayClosedEMS (1),
relayOpenEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the state of the output relay. If
the output relay is closed, the relayClosedEMS (1) value will be returned.
If the output relay is open, the relayOpenEMS (2) value will be
returned. "
::= { emsOutputRelayStatusEntry 3 }
emsOutputRelayStatusOutputRelayNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyClosedEMS (1),
normallyOpenEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the output relay. If
the normal state is closed, the normallyClosedEMS (1) value will be returned.
If the normal state is open, the normallyOpenEMS (2) value will be
returned. "
::= { emsOutputRelayStatusEntry 4 }
-- EMS OUTLET STATUS TABLE
emsOutletStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual outlets. The number of
entries is contained in the emsStatusOutletCount OID."
::= { emsOutletStatus 1 }
emsOutletStatusEntry OBJECT-TYPE
SYNTAX EMSOutletStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The outlets to access."
INDEX { emsOutletStatusOutletIndex }
::= { emsOutletStatusTable 1 }
EMSOutletStatusEntry ::=
SEQUENCE {
emsOutletStatusOutletIndex INTEGER,
emsOutletStatusOutletName DisplayString,
emsOutletStatusOutletState INTEGER,
emsOutletStatusOutletNormalState INTEGER
}
emsOutletStatusOutletIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the outlet entry."
::= { emsOutletStatusEntry 1 }
emsOutletStatusOutletName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the outlet."
::= { emsOutletStatusEntry 2 }
emsOutletStatusOutletState OBJECT-TYPE
SYNTAX INTEGER {
outletOnEMS (1),
outletOffEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the state of the outlet. If
the outlet is on, the outletOnEMS (1) value will be returned.
If the outlet is off, the outletOffEMS (2) value will be
returned. "
::= { emsOutletStatusEntry 3 }
emsOutletStatusOutletNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyOnEMS (1),
normallyOffEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the outlet. If
the normal state is on, the normallyOnEMS (1) value will be returned.
If the normal state is off, the normallyOffEMS (2) value will be
returned. "
::= { emsOutletStatusEntry 4 }
-- EMS ALARM DEVICE STATUS TABLE
emsAlarmDeviceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSAlarmDeviceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual alarm devices. The number of
entries is contained in the emsStatusAlarmDeviceCount OID."
::= { emsAlarmDeviceStatus 1 }
emsAlarmDeviceStatusEntry OBJECT-TYPE
SYNTAX EMSAlarmDeviceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The alarm devices to access."
INDEX { emsAlarmDeviceStatusDeviceIndex }
::= { emsAlarmDeviceStatusTable 1 }
EMSAlarmDeviceStatusEntry ::=
SEQUENCE {
emsAlarmDeviceStatusDeviceIndex INTEGER,
emsAlarmDeviceStatusDeviceName DisplayString,
emsAlarmDeviceStatusDeviceState INTEGER
}
emsAlarmDeviceStatusDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the alarm device entry."
::= { emsAlarmDeviceStatusEntry 1 }
emsAlarmDeviceStatusDeviceName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the alarm device.
This OID is provided for informational purposes only."
::= { emsAlarmDeviceStatusEntry 2 }
emsAlarmDeviceStatusDeviceState OBJECT-TYPE
SYNTAX INTEGER {
alarmDeviceOnEMS (1),
alarmDeviceOffEMS (2),
alarmDeviceNotInstalledEMS (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the device state. If
the device is active, the alarmDeviceOnEMS (1) value will be returned.
If the device is inactive, the alarmDeviceOffEMS (2) value will be
returned. If the device is not installed, the
alarmDeviceNotInstalledEMS (3) value will be returned."
::= { emsAlarmDeviceStatusEntry 3 }
-- EMS SENSOR STATUS TABLE
emsSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EMSSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for access of individual sensors. The number of
entries is contained in the emsStatusSensorCount OID."
::= { emsSensorStatus 1 }
emsSensorStatusEntry OBJECT-TYPE
SYNTAX EMSSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to access."
INDEX { emsSensorStatusSensorIndex }
::= { emsSensorStatusTable 1 }
EMSSensorStatusEntry ::=
SEQUENCE {
emsSensorStatusSensorIndex INTEGER,
emsSensorStatusSensorSystemName DisplayString,
emsSensorStatusSensorName DisplayString,
emsSensorStatusSensorState INTEGER,
emsSensorStatusSensorNormalState INTEGER,
emsSensorStatusSensorAlarmDelay INTEGER
}
emsSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsSensorStatusEntry 1 }
emsSensorStatusSensorSystemName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system name of the sensor. This describes the hardware system
intent of this sensor."
::= { emsSensorStatusEntry 2 }
emsSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the sensor as given by the system user."
::= { emsSensorStatusEntry 3 }
emsSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
sensorFaultedEMS (1),
sensorOKEMS (2),
sensorNotInstalledEMS (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the sensor state. If the sensor is faulted,
the sensorFaultedEMS (1) value will be returned.
If the sensor is not faulted, the sensorOKEMS (2) value will be
returned. If the sensor is not installed, the sensorNotInstalledEMS (3)
value will be returned."
::= { emsSensorStatusEntry 4 }
emsSensorStatusSensorNormalState OBJECT-TYPE
SYNTAX INTEGER {
normallyClosedEMS (1),
normallyOpenEMS (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Getting this variable will return the normal state of the sensor. If
the normal state is closed, the normallyClosedEMS (1) value will be returned.
If the normal state is closed, the normallyOpenEMS (2) value will be
returned."
::= { emsSensorStatusEntry 5 }
emsSensorStatusSensorAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The delay (in seconds) after a sensor detects an alarm condition before the
condition is reported."
::= { emsSensorStatusEntry 6 }
-- EMS INPUT STATE SENSOR CONFIG TABLE
emsSmokeSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsSmokeSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { emsInputStateSensorConfig 1 }
emsSmokeSensorConfigEntry OBJECT-TYPE
SYNTAX EmsSmokeSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { emsSmokeSensorConfigSensorIndex }
::= { emsSmokeSensorConfigTable 1 }
EmsSmokeSensorConfigEntry ::=
SEQUENCE {
emsSmokeSensorConfigSensorIndex INTEGER,
emsSmokeSensorConfigSensorName DisplayString,
emsSmokeSensorConfigSensorLocation DisplayString,
emsSmokeSensorConfigSensorSeverity INTEGER
}
emsSmokeSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsSmokeSensorConfigEntry 1 }
emsSmokeSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the smoke sensor."
::= { emsSmokeSensorConfigEntry 2 }
emsSmokeSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the smoke sensor."
::= { emsSmokeSensorConfigEntry 3 }
emsSmokeSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsSmokeSensorConfigEntry 4 }
emsVibrationSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsVibrationSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { emsInputStateSensorConfig 2 }
emsVibrationSensorConfigEntry OBJECT-TYPE
SYNTAX EmsVibrationSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { emsVibrationSensorConfigSensorIndex }
::= { emsVibrationSensorConfigTable 1 }
EmsVibrationSensorConfigEntry ::=
SEQUENCE {
emsVibrationSensorConfigSensorIndex INTEGER,
emsVibrationSensorConfigSensorName DisplayString,
emsVibrationSensorConfigSensorLocation DisplayString,
emsVibrationSensorConfigSensorSeverity INTEGER
}
emsVibrationSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsVibrationSensorConfigEntry 1 }
emsVibrationSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the vibration sensor."
::= { emsVibrationSensorConfigEntry 2 }
emsVibrationSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the vibration sensor."
::= { emsVibrationSensorConfigEntry 3 }
emsVibrationSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsVibrationSensorConfigEntry 4 }
emsFluidSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsFluidSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { emsInputStateSensorConfig 3 }
emsFluidSensorConfigEntry OBJECT-TYPE
SYNTAX EmsFluidSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { emsFluidSensorConfigSensorIndex }
::= { emsFluidSensorConfigTable 1 }
EmsFluidSensorConfigEntry ::=
SEQUENCE {
emsFluidSensorConfigSensorIndex INTEGER,
emsFluidSensorConfigSensorName DisplayString,
emsFluidSensorConfigSensorLocation DisplayString,
emsFluidSensorConfigSensorSeverity INTEGER
}
emsFluidSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsFluidSensorConfigEntry 1 }
emsFluidSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the fluid sensor."
::= { emsFluidSensorConfigEntry 2 }
emsFluidSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the fluid sensor."
::= { emsFluidSensorConfigEntry 3 }
emsFluidSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsFluidSensorConfigEntry 4 }
emsDoorSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsDoorSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the configuration of individual sensors."
::= { emsInputStateSensorConfig 4 }
emsDoorSensorConfigEntry OBJECT-TYPE
SYNTAX EmsDoorSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to configure."
INDEX { emsDoorSensorConfigSensorIndex }
::= { emsDoorSensorConfigTable 1 }
EmsDoorSensorConfigEntry ::=
SEQUENCE {
emsDoorSensorConfigSensorIndex INTEGER,
emsDoorSensorConfigSensorName DisplayString,
emsDoorSensorConfigSensorLocation DisplayString,
emsDoorSensorConfigSensorSeverity INTEGER
}
emsDoorSensorConfigSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsDoorSensorConfigEntry 1 }
emsDoorSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the door sensor."
::= { emsDoorSensorConfigEntry 2 }
emsDoorSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined location of the door sensor."
::= { emsDoorSensorConfigEntry 3 }
emsDoorSensorConfigSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsDoorSensorConfigEntry 4 }
--EMS INPUT STATE SENSOR STATUS TABLE
emsSmokeSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the emsSmokeSensorStatusTable."
::= { emsInputStateSensorStatus 1 }
emsSmokeSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsSmokeSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { emsInputStateSensorStatus 2 }
emsSmokeSensorStatusEntry OBJECT-TYPE
SYNTAX EmsSmokeSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to access."
INDEX { emsSmokeSensorStatusSensorIndex }
::= { emsSmokeSensorStatusTable 1 }
EmsSmokeSensorStatusEntry ::=
SEQUENCE {
emsSmokeSensorStatusSensorIndex INTEGER,
emsSmokeSensorStatusSensorName DisplayString,
emsSmokeSensorStatusSensorLocation DisplayString,
emsSmokeSensorStatusSensorState INTEGER,
emsSmokeSensorStatusSensorSeverity INTEGER,
emsSmokeSensorCommStatus INTEGER
}
emsSmokeSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsSmokeSensorStatusEntry 1 }
emsSmokeSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the smoke sensor."
::= { emsSmokeSensorStatusEntry 2 }
emsSmokeSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the smoke sensor."
::= { emsSmokeSensorStatusEntry 3 }
emsSmokeSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
smokeDetected (1),
noSmoke (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the smoke sensor.
smokeDetected (1) indicates there is smoke.
noSmoke (2) indicates there is no smoke.
unknown (3) indicates the state is unknown."
::= { emsSmokeSensorStatusEntry 4 }
emsSmokeSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsSmokeSensorStatusEntry 5 }
emsSmokeSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the smoke sensor."
::= { emsSmokeSensorStatusEntry 6 }
emsVibrationSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the emsVibrationSensorStatusTable."
::= { emsInputStateSensorStatus 3}
emsVibrationSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsVibrationSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { emsInputStateSensorStatus 4 }
emsVibrationSensorStatusEntry OBJECT-TYPE
SYNTAX EmsVibrationSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to access."
INDEX { emsVibrationSensorStatusSensorIndex }
::= { emsVibrationSensorStatusTable 1 }
EmsVibrationSensorStatusEntry ::=
SEQUENCE {
emsVibrationSensorStatusSensorIndex INTEGER,
emsVibrationSensorStatusSensorName DisplayString,
emsVibrationSensorStatusSensorLocation DisplayString,
emsVibrationSensorStatusSensorState INTEGER,
emsVibrationSensorStatusSensorSeverity INTEGER,
emsVibrationSensorCommStatus INTEGER
}
emsVibrationSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsVibrationSensorStatusEntry 1 }
emsVibrationSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the vibration sensor."
::= { emsVibrationSensorStatusEntry 2 }
emsVibrationSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the vibration sensor."
::= { emsVibrationSensorStatusEntry 3 }
emsVibrationSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
vibrationDetected (1),
noVibration (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the vibration sensor.
vibrationDetected (1) indicates there is vibration.
noVibration (2) indicates there is no vibration.
unknown (3) indicates the state is unknown."
::= { emsVibrationSensorStatusEntry 4 }
emsVibrationSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsVibrationSensorStatusEntry 5 }
emsVibrationSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the vibration sensor."
::= { emsVibrationSensorStatusEntry 6 }
emsFluidSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the emsFluidSensorStatusTable."
::= { emsInputStateSensorStatus 5}
emsFluidSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsFluidSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { emsInputStateSensorStatus 6 }
emsFluidSensorStatusEntry OBJECT-TYPE
SYNTAX EmsFluidSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensors to access."
INDEX { emsFluidSensorStatusSensorIndex }
::= { emsFluidSensorStatusTable 1 }
EmsFluidSensorStatusEntry ::=
SEQUENCE {
emsFluidSensorStatusSensorIndex INTEGER,
emsFluidSensorStatusSensorName DisplayString,
emsFluidSensorStatusSensorLocation DisplayString,
emsFluidSensorStatusSensorState INTEGER,
emsFluidSensorStatusSensorSeverity INTEGER,
emsFluidSensorCommStatus INTEGER
}
emsFluidSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsFluidSensorStatusEntry 1 }
emsFluidSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the fluid sensor."
::= { emsFluidSensorStatusEntry 2 }
emsFluidSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the fluid sensor."
::= { emsFluidSensorStatusEntry 3 }
emsFluidSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
fluidDetected (1),
noFluid (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the fluid sensor.
fluidDetected (1) indicates there is fluid leak.
noFluid (2) indicates there is no fluid leak.
unknown (3) indicates the state is unknown."
::= { emsFluidSensorStatusEntry 4 }
emsFluidSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsFluidSensorStatusEntry 5 }
emsFluidSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the fluid sensor."
::= { emsFluidSensorStatusEntry 6 }
emsDoorSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the emsDoorSensorStatusTable."
::= { emsInputStateSensorStatus 7}
emsDoorSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmsDoorSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for the access of individual sensors."
::= { emsInputStateSensorStatus 8}
emsDoorSensorStatusEntry OBJECT-TYPE
SYNTAX EmsDoorSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor to access."
INDEX { emsDoorSensorStatusSensorIndex }
::= { emsDoorSensorStatusTable 1 }
EmsDoorSensorStatusEntry ::=
SEQUENCE {
emsDoorSensorStatusSensorIndex INTEGER,
emsDoorSensorStatusSensorName DisplayString,
emsDoorSensorStatusSensorLocation DisplayString,
emsDoorSensorStatusSensorState INTEGER,
emsDoorSensorStatusSensorSeverity INTEGER,
emsDoorSensorCommStatus INTEGER
}
emsDoorSensorStatusSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sensor entry."
::= { emsDoorSensorStatusEntry 1 }
emsDoorSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined name of the door sensor."
::= { emsDoorSensorStatusEntry 2 }
emsDoorSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined location of the door sensor."
::= { emsDoorSensorStatusEntry 3 }
emsDoorSensorStatusSensorState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
unknown (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the door sensor.
open (1) indicates door open.
closed (2) indicates door closed.
unknown (3) indicates the state is unknown."
::= { emsDoorSensorStatusEntry 4 }
emsDoorSensorStatusSensorSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
warning(2),
informational(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be
critical(1), warning(2) or informational(3)."
::= { emsDoorSensorStatusEntry 5 }
emsDoorSensorCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commOK(1),
commLost(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communication status of the door sensor."
::= { emsDoorSensorStatusEntry 6 }
-- airFM AIR CONDITIONER IDENT
airFMIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the device."
::= { airFMIdent 1 }
airFMIdentTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMIdentTable. "
::= { airFMIdent 2 }
airFMIdentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting identification information
from each module in the system. "
::= { airFMIdent 3 }
airFMIdentEntry OBJECT-TYPE
SYNTAX AirFMIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMIdentModuleIndex }
::= { airFMIdentTable 1 }
AirFMIdentEntry ::=
SEQUENCE {
airFMIdentModuleIndex INTEGER,
airFMIdentModuleModelNumber DisplayString,
airFMIdentModuleDateOfMfg DisplayString,
airFMIdentModuleSerialNumber DisplayString,
airFMIdentModuleFirmwareRev DisplayString,
airFMIdentModuleHardwareRev DisplayString
}
airFMIdentModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module information."
::= { airFMIdentEntry 1 }
airFMIdentModuleModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
model number. "
::= { airFMIdentEntry 2 }
airFMIdentModuleDateOfMfg OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
manufacture date. "
::= { airFMIdentEntry 3 }
airFMIdentModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit serial number. "
::= { airFMIdentEntry 4 }
airFMIdentModuleFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
firmware revision. "
::= { airFMIdentEntry 5 }
airFMIdentModuleHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
hardware revision. "
::= { airFMIdentEntry 6 }
airFMIdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
location of the device. "
::= { airFMIdent 4 }
airFMIdentContact OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
person to contact regarding the device. "
::= { airFMIdent 5 }
-- airFM AIR CONDITIONER STATUS
airFMStatusSystemOn OBJECT-TYPE
SYNTAX INTEGER {
statusOn (1),
statusOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operating state of the system.
This OID has been deprecated in favor of
airFMGroupSysStatus."
::= { airFMStatus 1 }
airFMStatusSystemAverageRetTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system average return air
temperature in tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMSysAvgReturnTempC."
::= { airFMStatus 2 }
airFMStatusSystemAverageRetTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system average return air
temperature in tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMSysAvgReturnTempF."
::= { airFMStatus 3 }
airFMStatusSystemAverageRetHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system average return air
humidity in tenths of percent RH.
This OID has been deprecated in favor of
airFMSysAvgReturnHum."
::= { airFMStatus 4 }
airFMStatusSystemActionTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system action air
temperature in tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMSysCtrlTempC."
::= { airFMStatus 5 }
airFMStatusSystemActionTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system action air
temperature in tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMSysCtrlTempF."
::= { airFMStatus 6 }
airFMStatusSystemActionHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system action air humidity in tenths of percent RH.
This OID has been deprecated in favor of
airFMSysCtrlHum."
::= { airFMStatus 7 }
airFMStatusSystemRemoteHighTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote high air
temperature in tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMSysMaxRemoteTempC."
::= { airFMStatus 8 }
airFMStatusSystemRemoteHighTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote high air
temperature in tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMSysMaxRemoteTempF."
::= { airFMStatus 9 }
airFMStatusSystemRemoteAvgTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote average air
temperature in tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMSysAvgRemoteTempC."
::= { airFMStatus 10 }
airFMStatusSystemRemoteAvgTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote average air
temperature in tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMSysAvgRemoteTempF."
::= { airFMStatus 11 }
airFMStatusSystemRemoteAvgHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote average air
humidity in tenths of percent RH.
This OID has been deprecated in favor of
airFMSysAvgRemoteHum."
::= { airFMStatus 12 }
airFMStatusSystemRemoteLowTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote low air
temperature in tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMSysMinRemoteTempC."
::= { airFMStatus 13 }
airFMStatusSystemRemoteLowTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system remote low air
temperature in tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMSysMinRemoteTempF."
::= { airFMStatus 14 }
airFMStatusSystemCoolingEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabledYes (1),
enabledNo (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the system cooling
function enable.
This OID has been deprecated in favor of
airFMSysCoolState."
::= { airFMStatus 15 }
airFMStatusSystemReheatingEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabledYes (1),
enabledNo (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the system reheating
function enable.
This OID has been deprecated in favor of
airFMSysReheatState."
::= { airFMStatus 16 }
airFMStatusSystemHumidifyEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabledYes (1),
enabledNo (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the system humidify
function enable.
This OID has been deprecated in favor of
airFMSysHumState."
::= { airFMStatus 17 }
airFMStatusSystemDehumidifyEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabledYes (1),
enabledNo (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the system dehumidify
function enable.
This OID has been deprecated in favor of
airFMSysDehumState."
::= { airFMStatus 18 }
airFMStatusModuleTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMStatusModuleTable."
::= { airFMStatus 19 }
airFMStatusModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMStatusModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module
in the system."
::= { airFMStatus 20 }
airFMStatusModuleEntry OBJECT-TYPE
SYNTAX AirFMStatusModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get status from."
INDEX { airFMStatusModuleIndex }
::= { airFMStatusModuleTable 1 }
AirFMStatusModuleEntry ::=
SEQUENCE {
airFMStatusModuleIndex INTEGER,
airFMStatusModuleOutputCapacity INTEGER,
airFMStatusModuleSupplyTempC INTEGER,
airFMStatusModuleSupplyTempF INTEGER,
airFMStatusModuleSupplyHum INTEGER,
airFMStatusModuleReturnTempC INTEGER,
airFMStatusModuleReturnTempF INTEGER,
airFMStatusModuleReturnHum INTEGER
}
airFMStatusModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module information."
::= { airFMStatusModuleEntry 1 }
airFMStatusModuleOutputCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module output capacity in kilowatts.
This OID has been deprecated in favor of
airFMModOutputCapacity."
::= { airFMStatusModuleEntry 2 }
airFMStatusModuleSupplyTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module supply air temperature in
tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMModSupplyTempC."
::= { airFMStatusModuleEntry 3 }
airFMStatusModuleSupplyTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module supply air temperature in
tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMModSupplyTempF."
::= { airFMStatusModuleEntry 4 }
airFMStatusModuleSupplyHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module supply air humidity in tenths of percent RH.
This OID has been deprecated in favor of
airFMModSupplyHum."
::= { airFMStatusModuleEntry 5 }
airFMStatusModuleReturnTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module return air temperature in
tenths of degrees Celsius.
This OID has been deprecated in favor of
airFMModReturnTempC."
::= { airFMStatusModuleEntry 6 }
airFMStatusModuleReturnTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module return air temperature in
tenths of degrees Fahrenheit.
This OID has been deprecated in favor of
airFMModReturnTempF."
::= { airFMStatusModuleEntry 7 }
airFMStatusModuleReturnHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module return air humidity in tenths of percent RH.
This OID has been deprecated in favor of
airFMModReturnHum."
::= { airFMStatusModuleEntry 8 }
-- airFM AIR CONDITIONER GROUP DATA
airFMGroupSysStatus OBJECT-TYPE
SYNTAX INTEGER {
statusOnLine (1),
statusIdle (2),
statusLoadShare (3),
statusOffLine (4),
statusFailed (5),
statusDisabled (6),
statusUndefined (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of this system within the group."
::= { airFMGroup 1 }
airFMGroupSysRuntime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hours the system has been running."
::= { airFMGroup 2 }
airFMGroupSysRole OBJECT-TYPE
SYNTAX INTEGER {
rolePrimary (1),
roleBackup (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The role of this system within the group."
::= { airFMGroup 3 }
-- airFM Group System Roles
airFMGroupSysRolesTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMGroupSysRolesTable. "
::= { airFMGroupSysRoles 1 }
airFMGroupSysRolesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMGroupSysRolesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each system
in the group. "
::= { airFMGroupSysRoles 2 }
airFMGroupSysRolesEntry OBJECT-TYPE
SYNTAX AirFMGroupSysRolesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The system to get status from."
INDEX { airFMGroupSysIndex }
::= { airFMGroupSysRolesTable 1 }
AirFMGroupSysRolesEntry ::=
SEQUENCE {
airFMGroupSysIndex INTEGER,
airFMGroupSysRoleStatus INTEGER,
airFMGroupSysPresentRole INTEGER,
airFMGroupSysManualRoleSetting INTEGER,
airFMGroupSysRunHours INTEGER,
airFMGroupSysComm INTEGER,
airFMGroupSysIPAddress IpAddress
}
airFMGroupSysIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the system information."
::= { airFMGroupSysRolesEntry 1 }
airFMGroupSysRoleStatus OBJECT-TYPE
SYNTAX INTEGER {
reserved1 (1),
reserved2 (2),
onLine (3),
idle (4),
loadShare (5),
failed (6),
offLine (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present mode of the System."
::= { airFMGroupSysRolesEntry 2 }
airFMGroupSysPresentRole OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
backup (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present role of the System in a Group."
::= { airFMGroupSysRolesEntry 3 }
airFMGroupSysManualRoleSetting OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
backup (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The manual role setting of the System in a Group.
Only applies if Role Assignment Method is set
to static (Manually Assigned Roles)."
::= { airFMGroupSysRolesEntry 4 }
airFMGroupSysRunHours OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of hours the System has been
contributing to environmental control."
::= { airFMGroupSysRolesEntry 5 }
airFMGroupSysComm OBJECT-TYPE
SYNTAX INTEGER {
commLost (1),
commEstablished (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a system is communicating with the
other Systems in the Group."
::= { airFMGroupSysRolesEntry 6 }
airFMGroupSysIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address of the System."
::= { airFMGroupSysRolesEntry 7 }
airFMGroupSysRoleAssignment OBJECT-TYPE
SYNTAX INTEGER {
staticManual (1),
dynamicAutomatic (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The method used to assign roles (i.e. Primary, Backup)
to the Systems in a Group.
staticManual: Manually assign Primary or Backup to
regulate run hours across the Group.
dynamicAutomatic: User indicates the number of Systems
that will be assigned a primary role in this Group."
::= { airFMGroupSysRoles 3 }
airFMGroupAutoRoleNumPrimary OBJECT-TYPE
SYNTAX INTEGER {
one (1),
two (2),
three (3),
four (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of Systems assigned the 'primary' role in
this Group. Only applies if Role Assignment Method
is set to dynamic (Automatic Run Hour Balancing)."
::= { airFMGroupSysRoles 4 }
-- airFM Group Config
airFMGroupCfgName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the group name."
::= { airFMGroupCfg 1 }
airFMGroupCfgNumSystems OBJECT-TYPE
SYNTAX INTEGER {
one (1),
two (2),
three (3),
four (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of Systems in this Group."
::= { airFMGroupCfg 2 }
airFMGroupCfgIdleBlower OBJECT-TYPE
SYNTAX INTEGER {
off (1),
minimumSpeed (2),
normalSpeed (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blower behavior for backup Systems and Systems that
have entered a failure mode."
::= { airFMGroupCfg 3 }
airFMGroupCfgShutdownSmoke OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, all Systems in the Group will shut down
if smoke is detected."
::= { airFMGroupCfg 4 }
airFMGroupCfgShutdownFire OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, all Systems in the Group will shut down
if fire is detected."
::= { airFMGroupCfg 5 }
airFMGroupCfgFailoverCommLoss OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Failover on Comm Loss enables an available backup
System to run in place of a System that has lost
communication with the Group."
::= { airFMGroupCfg 6 }
airFMGroupCfgDmdFightStatus OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Demand Fighting and Setpoint Sharing are
automatically enabled when a System is responding to
a Load Sharing Request."
::= { airFMGroupCfg 7 }
airFMGroupCfgDmdFightSetting OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Demand Fighting prevents a System from engaging
reheat in a Group where any System is cooling."
::= { airFMGroupCfg 8 }
airFMGroupCfgSetpointShareStatus OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Demand Fighting and Setpoint Sharing are
automatically enabled when a System is responding to
Load Sharing Request."
::= { airFMGroupCfg 9 }
airFMGroupCfgSetpointShareSetting OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"All Systems in the Group use the same setpoints."
::= { airFMGroupCfg 10 }
airFMGroupCfgResetFieldServiceDefaults OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset all Group
parameters, which can only be edited by a field
service engineer, to their factory default values.
Getting this OID will do nothing and return the
noOperation(1) value."
::= { airFMGroupCfg 11 }
-- airFM Group Load Sharing
airFMGroupLoadShareCoolRequests OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Systems that are cooling may request assistance from
other Systems in the Group."
::= { airFMGroupLoadShare 1 }
airFMGroupLoadShareCoolThreshC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Temperature threshold at which a System will generate
a load sharing request for cooling. Measured in
tenths of degrees Celsius."
::= { airFMGroupLoadShare 2 }
airFMGroupLoadShareCoolThreshF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Temperature threshold at which a System will generate
a load sharing request for cooling. Measured in
tenths of degrees Fahrenheit."
::= { airFMGroupLoadShare 3 }
airFMGroupLoadShareReheatRequests OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Systems that are reheating may request assistance
from other Systems in the Group."
::= { airFMGroupLoadShare 4 }
airFMGroupLoadShareReheatThreshC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Temperature threshold at which a System will generate
a load sharing request for reheating. Measured in
tenths of degrees Celsius."
::= { airFMGroupLoadShare 5 }
airFMGroupLoadShareReheatThreshF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Temperature threshold at which a System will generate
a load sharing request for reheating. Measured in
tenths of degrees Fahrenheit."
::= { airFMGroupLoadShare 6 }
airFMGroupLoadShareHumRequests OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Systems that are humidifying may request humidification
assistance from other Systems in the Group."
::= { airFMGroupLoadShare 7 }
airFMGroupLoadShareHumThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidity threshold at which a System will generate a
load sharing request for humidification. Measured in
tenths of percent relative humidity."
::= { airFMGroupLoadShare 8 }
airFMGroupLoadShareDehumRequests OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Systems that are dehumidifying may request assistance
from other Systems in the Group."
::= { airFMGroupLoadShare 9 }
airFMGroupLoadShareDehumThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidity threshold at which a System will generate a
load sharing request for dehumidification. Measured in
tenths of percent relative humidity."
::= { airFMGroupLoadShare 10 }
-- airFM Group System Failover Events
airFMGroupFailoverSysAnyMinorAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if any minor system alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 1 }
airFMGroupFailoverSysAnyMajorAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if any major system alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 2 }
airFMGroupFailoverSysHighEnvTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the high environmental temperature
alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 3 }
airFMGroupFailoverSysLowEnvTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the low environmental temperature
alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 4 }
airFMGroupFailoverSysHighEnvHum OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the high environmental humidity
alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 5 }
airFMGroupFailoverSysLowEnvHum OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the low environmental humidity
alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 6 }
airFMGroupFailoverSysFireAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the fire alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 7 }
airFMGroupFailoverSysSmokeAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the smoke alarm is active.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 8 }
airFMGroupFailoverSysCommLost OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the system has lost comm.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 9 }
airFMGroupFailoverSysSupplySensorFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the supply sensor has failed.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 10 }
airFMGroupFailoverSysReturnSensorFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the return sensor has failed.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 11 }
airFMGroupFailoverSysPrimarySensorFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the primary sensor has failed.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 12 }
airFMGroupFailoverSysSecondarySensorFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the secondary sensor has failed.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 13 }
airFMGroupFailoverSysNoSensorsAvailable OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if no sensors are available.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverSys 14 }
-- airFM Group Module Failover Events
airFMGroupFailoverModMaintRequired OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if maintenance is required on a
module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 1 }
airFMGroupFailoverModCoolFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if cooling has failed on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 2 }
airFMGroupFailoverModHumFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the humidifier has failed on a
module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 3 }
airFMGroupFailoverModBlwrCntrl1Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if blower controller 1 has failed on
a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 4 }
airFMGroupFailoverModBlwrCntrl2Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if blower controller 2 has failed on
a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 5 }
airFMGroupFailoverModHighFilterDP OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if a high filter differential
pressure is present on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 6 }
airFMGroupFailoverModHighSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if a high supply temperature is
active on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 7 }
airFMGroupFailoverModLowSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if a low supply temperature is active
on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 8 }
airFMGroupFailoverModLossOrLowAirFlow OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if there is a loss of air flow or low
air flow on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 9 }
airFMGroupFailoverModHumReplaceCylinder OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if a humidifier needs its cylinder
replaced on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 10 }
airFMGroupFailoverModAirBlockInterlockOpen OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the air block interlock is open
on a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 11 }
airFMGroupFailoverModWaterDetected OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if water is detected by a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 12 }
airFMGroupFailoverModCondensatePumpFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enable (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling this OID will cause the system to enter
a failure state if the condensate pump has failed in
a module.
Once in the failure state, environmental control
ceases for the system, and the blowers enter the
Idle Blower Operation mode.
A value of notApplicable indicates that this alarm
does not apply to this device due to its configuration."
::= { airFMGroupFailoverMod 13 }
-- airFM System Status
airFMSysNumber OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
one (2),
two (3),
three (4),
four (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the system within the group.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 1 }
airFMSysPresentStatus OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
reserved1 (2),
reserved2 (3),
onLine (4),
idle (5),
loadShare (6),
failed (7),
offLine (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present mode of the System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 2 }
airFMSysPresentRole OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
primary (2),
backup (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present role of the System in the Group.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 3 }
airFMSysRunHours OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of hours the System has been
contributing to environmental control.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 4 }
airFMSysCoilFluidTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the coolant at the fluid coil
inlet. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 5 }
airFMSysCoilFluidTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the coolant at the fluid coil
inlet. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 6 }
airFMSysHotWaterTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hot water temperature. Measured in degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 7 }
airFMSysHotWaterTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hot water temperature. Measured in degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 8 }
airFMSysAvgReturnTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average return temperature calculated from all
present modules. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 9 }
airFMSysAvgReturnTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average return temperature calculated from all
present modules. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 10 }
airFMSysAvgReturnHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average return humidity calculated from all
present modules. Measured in tenths of percent RH.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 11 }
airFMSysAvgRemoteTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average temperature calculated from all
operational remote sensors. Measured in tenths of
degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 12 }
airFMSysAvgRemoteTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average temperature calculated from all
operational remote sensors. Measured in tenths of
degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 13 }
airFMSysAvgRemoteHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average return humidity calculated from all
present modules. Measured in tenths of percent RH.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 14 }
airFMSysMaxRemoteTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum temperature reading from all operational
remote sensors. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 15 }
airFMSysMaxRemoteTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum temperature reading from all operational
remote sensors. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 16 }
airFMSysMinRemoteTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum temperature reading from all operational
remote sensors. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 17 }
airFMSysMinRemoteTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum temperature reading from all operational
remote sensors. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 18 }
airFMSysTempCtrlMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
avgReturn (2),
avgRemote (3),
maxRemote (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The method of environment temperature control
selected to regulate the temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 19 }
airFMSysActualTempCtrlMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
avgReturn (2),
avgRemote (3),
maxRemote (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual method of environment temperature control
being used to regulate the temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 20 }
airFMSysHumCtrlMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
avgReturnRH (2),
avgReturnDewPt (3),
avgRemoteRH (4),
avgRemoteDewPt (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The method of environment humidity control selected
to regulate the humidity.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 21 }
airFMSysActualHumCtrlMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
avgReturnRH (2),
avgReturnDewPt (3),
avgRemoteRH (4),
avgRemoteDewPt (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual method of environment humidity control
being used to regulate the humidity.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 22 }
airFMSysCtrlTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system environmental control air temperature from
the sensor denoted by airFMSysActualTempCtrl.
Measured in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 23 }
airFMSysCtrlTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system environmental control air temperature from
the sensor denoted by airFMSysActualTempCtrl.
Measured in tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 24 }
airFMSysCtrlHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system environmental control air humidity from
the sensor denoted by airFMSysActualHumCtrl.
Measured in percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysStatus 25 }
-- airFM System Demands and Actuals
airFMSysDXCoolingDmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The direct expansion cooling output demanded by the
System. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 1 }
airFMSysDXDehumDmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The direct expansion dehumidification output demanded
by the System. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 2 }
airFMSysDXActualCoolDehum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The direct expansion cooling or dehumidification
output measured by the System. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 3 }
airFMSysCoilFluidCoolDmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid coil cooling output demanded by the System.
Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 4 }
airFMSysCoilFluidDehumDmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid coil dehumidification output demanded by
the System. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 5 }
airFMSysCoilFluidActualCoolDehum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid coil cooling or dehumidification output
measured by the System. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 6 }
airFMSysElectricReheatDmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The electric reheating output demanded by the System.
Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 7 }
airFMSysActualElectricReheat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The electric reheating output of the System.
Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 8 }
airFMSysSteamHotGasReheatDmd OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
off (2),
on (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The steam, hot water, or hot gas reheating output
demanded by the System.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMSysDemands 9 }
airFMSysActualSteamHotGasReheat OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
off (2),
on (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The steam, hot water, or hot gas reheating output of
the System.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMSysDemands 10 }
airFMSysSteamElectrodeHumDmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The steam electrode humidification output demanded by
the System. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 11 }
airFMSysActualSteamElectrodeHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average steam electrode humidification output
measured for the Modules in the System. Measured in
percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 12 }
airFMSysSteamHumDmd OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
off (2),
on (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The steam humidification output demanded by the System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 13 }
airFMSysActualSteamHum OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
off (2),
on (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The steam humidification output for the System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDemands 14 }
-- airFM System Physical Setup
airFMSysNumModules OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
one (2),
two (3),
three (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Modules in this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 1 }
airFMSysNumPCIOMs OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
one (2),
two (3),
three (4),
four (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Programmable Customer Input/Output
Modules (PCIOMs) installed in the Main Module of this
System. Each PCIOM adds four input contacts and four
output relays to the System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 2 }
airFMSysMainsVlt OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The mains voltage for the Modules in this System.
A value of N/A indicates that this OID does not apply
to this device due to its configuration."
::= { airFMSysSetup 3 }
airFMSysUPSVlt OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS voltage for the Modules in this System.
A value of N/A indicates that this OID does not apply
to this device due to its configuration."
::= { airFMSysSetup 4 }
airFMSysCoilCfg OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
dx (2),
econ (3),
multicool (4),
chilledWater (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of cooling coils installed in the Modules in
this System: DX coil, DX and MultiCool (chilled water)
coils, DX and Economizer coils, or only a Chilled
Liquid coil.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 5 }
airFMSysRefrigType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
r22 (2),
r407C (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of refrigerant used by each compressor in
the system.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 6 }
airFMSysHeatRejection OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
airCooled (2),
waterCooled (3),
glycolCooled (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The method the Modules in this System use to transfer
heat away from the refrigerant.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 7 }
airFMSysDischAirPtrn OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
upFlow (2),
downFlow (3),
horizFlow (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The discharge air pattern for the Modules in this
System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 8 }
airFMSysAirFltr OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
standard (2),
highEfficiency (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of air filters (standard or high efficiency)
installed in the Modules of this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 9 }
airFMSysFlowSwitch OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
dxEcon (3),
multiCoolChillWater (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the optional flow switch.
None: No flow switch is installed in this System.
DX: Coolant input to the heat exchanger (condenser).
MultiCool: Chilled water input to the MultiCool coil.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 10 }
airFMSysCoilFluidVlvAct OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
springAnalog (3),
floatingControl (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of valve actuator installed on the coil
fluid valve. The coil fluid valve controls the flow
of coolant into a fluid cooling coil, such as a
MultiCool or Economizer coil.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 11 }
airFMSysCoilFluidVlvType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
twoWay (2),
threeWay (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of coil fluid valve installed for the
Modules in this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 12 }
airFMSysCndsrFluidVlvAct OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
floatingControl (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of valve actuator installed on the Condenser
fluid valve. The Condenser fluid valve controls the
flow of coolant into the heat exchanger (condenser)
to regulate head pressure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 13 }
airFMSysCndsrFluidVlvType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
twoWay (2),
threeWay (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Condenser fluid valve installed for the
Modules in this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 14 }
airFMSysHotWaterVlvAct OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
springAnalog (3),
floatingControl (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of valve actuator installed on the hot water
valve.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysSetup 15 }
airFMSysNumRemoteSensors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of remote sensors detected by the system."
::= { airFMSysSetup 16 }
-- airFM System Configuration
airFMSysPrimaryControlSensor OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
return (2),
remote (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Selects whether return or remote sensors will control
the system.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 1 }
airFMSysRemoteSensorData OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
average (2),
maximum (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Selects whether average temperature or max temperature
will be used when remote sensors are selected for
control of the system.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 2 }
airFMSysFastStartup OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimizes the time for the cooling process to begin
after other delay constraints have been met.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 3 }
airFMSysStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the delay that begins when power is applied and
ends when the System starts. This allows you to
create a staged restart among your Systems after a
power loss. Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 4 }
airFMSysModeDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the delay between starting the blowers and
engaging the modes. It allows the sensors to read
room conditions accurately and allows the controller
to check for major alarms before engaging a mode.
Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 5 }
airFMSysCommLossShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the delay between an Expansion Module losing
communication with the Main Module and the Expansion
Module shutting down. A value of -1 will keep
the Expansion Module running after a communication
loss. Measured in hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 6 }
airFMSysResetSysFailure OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will allows the system
to return from any failure condition, if the
failure(s) have cleared.
Getting this OID will do nothing and return the noOperation(1) value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 7 }
airFMSysResetUserDflts OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset all system
parameters that can be edited by the user to their
factory default values.
Getting this OID will do nothing and return the noOperation(1) value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 8 }
airFMSysResetFldSrvcDflts OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset all system
parameters that can only be edited by the field
service engineer to their factory default values.
Getting this OID will do nothing and return the noOperation(1) value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 9 }
airFMSysResetRunHours OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this OID to reset(2) will reset the system Run Hours.
Getting this OID will do nothing and return the noOperation(1) value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysConfig 10 }
-- airFM System Cooling
airFMSysCompMinOnTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the minimum time the compressor continues to
operate after it is started. The delay protects the
compressor from damage. Caution: Reducing this delay
shortens compressor life. Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 1 }
airFMSysCompMinOffTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the minimum time the compressor will remain off
after it ceases operation. The delay protects the
compressor from damage. Caution: Reducing this delay
shortens compressor life. Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 2 }
airFMSysCompRotPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set how often to perform compressor runtime
balancing. Measured in hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 3 }
airFMSysEconIsolVlvOpenDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the delay between opening the Economizer Isolator
output relay and engaging the compressors. Measured
in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 4 }
airFMSysEconIsolVlvCloseDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the delay between disengaging the compressor and
closing the Economizer Isolator output relay.
Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 5 }
airFMSysCndsrFluidVlvCloseDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the time the condenser valve remains open after
the compressors disengage. Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 6 }
airFMSysInterstageDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DX interstage delay allows the first compressor's
cooling to take effect before engaging the second
compressor. This prevents the second compressor from
cycling on and off excessively. Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 7 }
airFMSysCoolState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the mode to enabled or disabled. Disabled modes
will not operate, and you cannot make changes to
their settings while they are disabled.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 8 }
airFMSysCoolEssFunction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
yes (2),
no (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the priority of the mode for alarms and events
with the nonessential stop behavior. Nonessential
modes are disabled during nonessential stop alarms
and events.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 9 }
airFMSysCoolSetpointC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The target value for the selected control sensor air
for this mode. It must be at least 1.0 C above the
reheat setpoint if a heater is installed. Measured
in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 10 }
airFMSysCoolSetpointF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The target value for the selected control sensor air
for this mode. It must be at least 1.0 C above the
reheat setpoint if a heater is installed. Measured
in tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 11 }
airFMSysCoolDeadbandC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature range that controls output when the
selected control sensor temperature is above the
setpoint. At the top of this range, the cool mode
outputs at 100%. The deadband does not apply to PID-
controlled modes. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 12 }
airFMSysCoolDeadbandF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature range that controls output when the
selected control sensor temperature is above the
setpoint. At the top of this range, the cool mode
outputs at 100%. The deadband does not apply to PID-
controlled modes. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 13 }
airFMSysCoolEconIsolFunction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the Economizer Automatic Coolant Isolation valve
to enabled or disabled. This valve anticipates a
cooling demand and opens the coil fluid valve.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 14 }
airFMSysSuctPresCompensation OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the Suction Pressure Compensation to enabled or
disabled. This function attempts to keep the suction
pressure from exceeding 95 psi.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 15 }
airFMSysCoilFluidActivThreshC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum coolant temperature required to use the
optional MultiCool or Economizer coil. Measured in
tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 16 }
airFMSysCoilFluidActivThreshF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum coolant temperature required to use the
optional MultiCool or Economizer coil. Measured in
tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 17 }
airFMSysCoilFluidActivDeadbandC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The controller will disengage the MultiCool or
Economizer coil when the coolant temperature reaches
the coil fluid temperature activation threshold plus
the deadband. Measured in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 18 }
airFMSysCoilFluidActivDeadbandF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The controller will disengage the MultiCool or
Economizer coil when the coolant temperature reaches
the coil fluid temperature activation threshold plus
the deadband. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 19 }
airFMSysCoolPIDMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
p (2),
pi (3),
pid (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the multipliers that the PID algorithm will use
to calculate the cool output. Proportional,
Proportional + Integral, or Proportional + Integral
+ Derivative.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 20 }
airFMSysCoolPIDGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the proportional multiplier to correct for
differences between the selected control sensor
actual temperature and the setpoint. Measured in
%/C.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 21 }
airFMSysCoolPIDResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the integral multiplier to correct for the
proportional offset. Measured in %/(C * min).
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 22 }
airFMSysCoolPIDDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the derivative multiplier to counteract overshoot
and droop during changes in the room load. Measured
in %/(C / min).
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysCooling 23 }
-- airFM System Humidify Function
airFMSysHumState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the mode to enabled or disabled. Disabled modes
will not operate, and you cannot make changes to their
settings while they are disabled.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 1 }
airFMSysHumEssFunction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
yes (2),
no (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the priority of the mode for alarms and events
with the nonessential stop behavior. Nonessential
modes are disabled during nonessential stop alarms
and events.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 2 }
airFMSysHumSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The target value for the selected control sensor air
for this mode. It must be at least 1.0 % RH below
the dehumidification setpoint. Measured in tenths of
percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 3 }
airFMSysHumDeadband OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidity range that controls output when the
selected control sensor humidity is below the
setpoint. At the top of this range, the
humidification mode outputs at 100%. The deadband
does not apply to PID-controlled modes. Measured in
tenths of percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 4 }
airFMSysHumCtrlSetting OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
relativeHum (2),
dewPoint (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the method to control the humidity in the room.
The two methods are Relative Humidity (RH) or Dew
Point of the selected control sensor air. The dew
point method helps correct for hot spots near the
selected control sensors.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 5 }
airFMSysActualHumCtrl OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
relativeHum (2),
dewPoint (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The humidity control method the system is using.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 6 }
airFMSysHumSensBand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The percentage of relative humidity below the
setpoint at which the humidifier will output at 100%
of capacity. Measured in percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysHumidify 7 }
-- airFM System Dehumidify Function
airFMSysDehumState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the mode to enabled or disabled. Disabled modes
will not operate, and you cannot make changes to their
settings while they are disabled.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 1 }
airFMSysDehumEssFunction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
yes (2),
no (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the priority of the mode for alarms and events
with the nonessential stop behavior. Nonessential
modes are disabled during nonessential stop alarms
and events.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 2 }
airFMSysDehumSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The target value for the selected control sensor air
for this mode. It must be at least 1.0 % RH above
the humidification setpoint if a humidifier is
installed. Measured in tenths of percent relative
humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 3 }
airFMSysDehumDeadband OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidity range above the setpoint at which the
dehumidification mode will output at 100%. The
deadband does not apply to PID controlled modes.
Measured in tenths of percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 4 }
airFMSysDehumCapacity OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
half (2),
full (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the dehumidification mode to use either half of
the cooling coil or the full coil when dehumidifying
the room.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 5 }
airFMSysDehumPIDMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
p (2),
pi (3),
pid (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the multipliers that the PID algorithm will use
to calculate the output. Proportional,
Proportional + Integral, or Proportional + Integral
+ Derivative.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 6 }
airFMSysDehumPIDGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the proportional multiplier to correct for
differences between the selected control sensor
actual humidity and the setpoint. Measured in %/%RH.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 7 }
airFMSysDehumPIDResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the integral multiplier to correct for the
proportional offset. Measured in %/(%RH * min).
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 8 }
airFMSysDehumPIDDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the derivative multiplier to counteract overshoot
and droop during changes in the room humidity.
Measure in %/(%RH / min).
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysDehumidify 9 }
-- airFM System Reheat Function
airFMSysReheatState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the mode to enabled or disabled. Disabled modes
will not operate, and you cannot make changes to their
settings while they are disabled.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 1 }
airFMSysReheatEssFunction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
yes (2),
no (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the priority of the mode for alarms and events
with the nonessential stop behavior. Nonessential
modes are disabled during nonessential stop alarms
and events.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 2 }
airFMSysReheatSetpointC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The target value for the selected control sensor air
for this mode. It must be at least 1.0 C below the
cooling setpoint. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 3 }
airFMSysReheatSetpointF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The target value for the selected control sensor air
for this mode. It must be at least 1.0 C below the
cooling setpoint. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 4 }
airFMSysReheatDeadbandC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature range that controls output when the
selected control sensor temperature is below the
setpoint. At the bottom of this range, the reheat
mode outputs at 100%. The deadband does not apply to
PID-controlled modes. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 5 }
airFMSysReheatDeadbandF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature range that controls output when the
selected control sensor temperature is below the
setpoint. At the bottom of this range, the reheat
mode outputs at 100%. The deadband does not apply to
PID-controlled modes. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 6 }
airFMSysReheatPIDMethod OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
p (2),
pi (3),
pid (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the multipliers that the PID algorithm will use
to calculate the output. Proportional,
Proportional + Integral, or Proportional + Integral
+ Derivative.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 7 }
airFMSysReheatPIDGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the proportional multiplier to correct for
differences between the selected control sensor
actual temperature and the setpoint. Measured in
%/C.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 8 }
airFMSysReheatPIDResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the integral multiplier to correct for the
proportional offset. Measured in %/(C * min).
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 9 }
airFMSysReheatPIDDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the derivative multiplier to counteract overshoot
and droop during changes in the room load. Measured
in %/(C / min).
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysReheat 10 }
-- airFM System Thresholds
airFMSysHighSplyTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature threshold for air blown into the
room (supply). If the supply temperature exceeds the
threshold, an alarm will occur. Measured in tenths
of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 1 }
airFMSysHighSplyTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature threshold for air blown into the
room (supply). If the supply temperature exceeds the
threshold, an alarm will occur. Measured in tenths
of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 2 }
airFMSysLowSplyTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature threshold for air blown into the
room (supply). If the supply temperature drops below
the threshold, an alarm will occur. Measured in
tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 3 }
airFMSysLowSplyTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature threshold for air blown into the
room (supply). If the supply temperature drops below
the threshold, an alarm will occur. Measured in
tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 4 }
airFMSysHighCoilFluidTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature threshold for coolant at the
inlet to the fluid coil. If the fluid coil coolant
temperature exceeds the threshold, an alarm will
occur. Measured in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 5 }
airFMSysHighCoilFluidTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature threshold for coolant at the
inlet to the fluid coil. If the fluid coil coolant
temperature exceeds the threshold, an alarm will
occur. Measured in tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 6 }
airFMSysLowCoilFluidTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature threshold for coolant at the
inlet to the fluid coil. If the fluid coil coolant
temperature drops below the threshold, an alarm will
occur. Measured in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 7 }
airFMSysLowCoilFluidTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature threshold for coolant at the
inlet to the fluid coil. If the fluid coil coolant
temperature drops below the threshold, an alarm will
occur. Measured in tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 8 }
airFMSysHighCtrlTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature threshold for air monitored by
the System. If the temperature exceeds the threshold,
an alarm will occur. Measured in tenths of degrees
Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 9 }
airFMSysHighCtrlTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature threshold for air monitored by
the System. If the temperature exceeds the threshold,
an alarm will occur. Measured in tenths of degrees
Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 10 }
airFMSysLowCtrlTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature threshold for air monitored by
the System. If the temperature drops below the
threshold, an alarm will occur. Measured in tenths
of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 11 }
airFMSysLowCtrlTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature threshold for air monitored by
the System. If the temperature drops below the
threshold, an alarm will occur. Measured in tenths
of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 12 }
airFMSysHighCtrlHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high humidity threshold for air monitored by the
System. If the humidity exceeds the threshold, an
alarm will occur. Measured in tenths of percent
relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 13 }
airFMSysLowCtrlHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low humidity threshold for air monitored by the
System. If the humidity drops below the threshold,
an alarm will occur. Measured in tenths of percent
relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 14 }
airFMSysTempAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time the blower must be on before a
temperature alarm can be issued. Measured in
seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 15 }
airFMSysHumAlarmDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time the blower must be on before a
humidity alarm can be issued. Measured in seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysThresholds 16 }
-- airFM System Input Contacts
airFMSysInputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMSysInputTable. "
::= { airFMSysInputs 1 }
airFMSysInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each input
contact."
::= { airFMSysInputs 2 }
airFMSysInputEntry OBJECT-TYPE
SYNTAX AirFMSysInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contact to obtain status from."
INDEX { airFMSysInputIndex }
::= { airFMSysInputTable 1 }
AirFMSysInputEntry ::=
SEQUENCE {
airFMSysInputIndex INTEGER,
airFMSysInputName DisplayString,
airFMSysInputStatus INTEGER,
airFMSysInputNormalState INTEGER,
airFMSysInputDelay INTEGER,
airFMSysInputAlarmAction INTEGER
}
airFMSysInputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number designator of the Input Contact."
::= { airFMSysInputEntry 1 }
airFMSysInputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configurable name for the Input Contact. Maximum
text input is 13 characters."
::= { airFMSysInputEntry 2 }
airFMSysInputStatus OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of this contact: Open or Closed. A
violation will occur when this relay is not in its
normal state."
::= { airFMSysInputEntry 3 }
airFMSysInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the normal state of this contact (the state when
no alarm/event exists)."
::= { airFMSysInputEntry 4 }
airFMSysInputDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the delay between this contact exiting its normal
state and an alarm being triggered. Measured in
seconds."
::= { airFMSysInputEntry 5 }
airFMSysInputAlarmAction OBJECT-TYPE
SYNTAX INTEGER {
statusOnly (1),
minor (2),
major (3),
remoteRunStop (4),
nonessStop (5),
immShutdown (6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the behavior for this contact when it exits its
normal state."
::= { airFMSysInputEntry 6 }
-- airFM System Output Relays
airFMSysOutputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMSysOutputTable. "
::= { airFMSysOutputs 1 }
airFMSysOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each output relay. "
::= { airFMSysOutputs 2 }
airFMSysOutputEntry OBJECT-TYPE
SYNTAX AirFMSysOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output relay to obtain status from."
INDEX { airFMSysOutputIndex }
::= { airFMSysOutputTable 1 }
AirFMSysOutputEntry ::=
SEQUENCE {
airFMSysOutputIndex INTEGER,
airFMSysOutputStatus INTEGER,
airFMSysOutputNormalState INTEGER
}
airFMSysOutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number designator of the output relay."
::= { airFMSysOutputEntry 1 }
airFMSysOutputStatus OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of this relay: Open or Closed. A violation
will occur when this relay is not in its normal state."
::= { airFMSysOutputEntry 2 }
airFMSysOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the normal state of this relay (the state when no
alarm/event exists)."
::= { airFMSysOutputEntry 3 }
-- airFM System Output Alarm Mapping
airFMSysAlarmMapSysTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMSysAlarmMapSysTable. "
::= { airFMSysAlarmMapSys 1 }
airFMSysAlarmMapSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysAlarmMapSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting alarm map information."
::= { airFMSysAlarmMapSys 2 }
airFMSysAlarmMapSysEntry OBJECT-TYPE
SYNTAX AirFMSysAlarmMapSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The system alarm map type to reference."
INDEX { airFMSysAlarmMapSysOutputIndex }
::= { airFMSysAlarmMapSysTable 1 }
AirFMSysAlarmMapSysEntry ::=
SEQUENCE {
airFMSysAlarmMapSysOutputIndex INTEGER,
airFMSysAlarmMapSysAnyAlarm INTEGER,
airFMSysAlarmMapSystemOn INTEGER,
airFMSysAlarmMapSystemOffline INTEGER,
airFMSysAlarmMapSysHighEnvTemp INTEGER,
airFMSysAlarmMapSysLowEnvTemp INTEGER,
airFMSysAlarmMapSysHighEnvHum INTEGER,
airFMSysAlarmMapSysLowEnvHum INTEGER,
airFMSysAlarmMapSysFireDet INTEGER,
airFMSysAlarmMapSysSmokeDet INTEGER,
airFMSysAlarmMapSysEconIsol INTEGER,
airFMSysAlarmMapSysSupplySensFail INTEGER,
airFMSysAlarmMapSysReturnSensFail INTEGER,
airFMSysAlarmMapSysRemSensRemoved INTEGER,
airFMSysAlarmMapSysPrimSensFail INTEGER,
airFMSysAlarmMapSysSecSensFail INTEGER,
airFMSysAlarmMapSysSecSensActive INTEGER
}
airFMSysAlarmMapSysOutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { airFMSysAlarmMapSysEntry 1 }
airFMSysAlarmMapSysAnyAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 2 }
airFMSysAlarmMapSystemOn OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for System On.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 3 }
airFMSysAlarmMapSystemOffline OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for System Offline.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 4 }
airFMSysAlarmMapSysHighEnvTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for High Environmental
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 5 }
airFMSysAlarmMapSysLowEnvTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Low Environmental
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 6 }
airFMSysAlarmMapSysHighEnvHum OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for High Environmental
Humidity.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 7 }
airFMSysAlarmMapSysLowEnvHum OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Low Environmental
Humidity.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 8 }
airFMSysAlarmMapSysFireDet OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Fire Detected.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 9 }
airFMSysAlarmMapSysSmokeDet OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Smoke Detected.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 10 }
airFMSysAlarmMapSysEconIsol OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Econ Isolator.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 11 }
airFMSysAlarmMapSysSupplySensFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Supply Sensor Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 12 }
airFMSysAlarmMapSysReturnSensFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Return Sensor Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 13 }
airFMSysAlarmMapSysRemSensRemoved OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Remote Sensor Removed.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 14 }
airFMSysAlarmMapSysPrimSensFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Primary Sensor Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 15 }
airFMSysAlarmMapSysSecSensFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Secondary Sensor Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 16 }
airFMSysAlarmMapSysSecSensActive OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System alarm map setting for Secondary Sensor Active.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapSysEntry 17 }
-- airFM Main Module Output Alarm Mapping
airFMSysAlarmMapMainModTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMSysAlarmMapMainModTable. "
::= { airFMSysAlarmMapMainMod 1 }
airFMSysAlarmMapMainModTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysAlarmMapMainModEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting alarm map information."
::= { airFMSysAlarmMapMainMod 2 }
airFMSysAlarmMapMainModEntry OBJECT-TYPE
SYNTAX AirFMSysAlarmMapMainModEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The main module alarm map type to reference."
INDEX { airFMSysAlarmMapMainModOutputIndex }
::= { airFMSysAlarmMapMainModTable 1 }
AirFMSysAlarmMapMainModEntry ::=
SEQUENCE {
airFMSysAlarmMapMainModOutputIndex INTEGER,
airFMSysAlarmMapMainModAnyAlarm INTEGER,
airFMSysAlarmMapMainModMaintReq INTEGER,
airFMSysAlarmMapMainModCoolFail INTEGER,
airFMSysAlarmMapMainModHighSupplyTemp INTEGER,
airFMSysAlarmMapMainModLowSupplyTemp INTEGER,
airFMSysAlarmMapMainModHumFail INTEGER,
airFMSysAlarmMapMainModHumReplCyl INTEGER,
airFMSysAlarmMapMainModCondPumpFail INTEGER,
airFMSysAlarmMapMainModBlwrCntl1Fail INTEGER,
airFMSysAlarmMapMainModBlwrCntl2Fail INTEGER,
airFMSysAlarmMapMainModHighFltrDP INTEGER,
airFMSysAlarmMapMainModLowAirFlow INTEGER,
airFMSysAlarmMapMainModAirBlckIntOpen INTEGER,
airFMSysAlarmMapMainModWaterDetected INTEGER
}
airFMSysAlarmMapMainModOutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { airFMSysAlarmMapMainModEntry 1 }
airFMSysAlarmMapMainModAnyAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 2 }
airFMSysAlarmMapMainModMaintReq OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Module Maintenance
Required.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 3 }
airFMSysAlarmMapMainModCoolFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Module Cooling
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 4 }
airFMSysAlarmMapMainModHighSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for High Supply
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 5 }
airFMSysAlarmMapMainModLowSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Low Supply
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 6 }
airFMSysAlarmMapMainModHumFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Humidifier Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 7 }
airFMSysAlarmMapMainModHumReplCyl OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Humidifier Replace
Cylinder.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 8 }
airFMSysAlarmMapMainModCondPumpFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Condensate Pump
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 9 }
airFMSysAlarmMapMainModBlwrCntl1Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Blower Controller 1
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 10 }
airFMSysAlarmMapMainModBlwrCntl2Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Blower Controller 2
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 11 }
airFMSysAlarmMapMainModHighFltrDP OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for High Filter
Differential Pressure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 12 }
airFMSysAlarmMapMainModLowAirFlow OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Low Air Flow.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 13 }
airFMSysAlarmMapMainModAirBlckIntOpen OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Air Block Interlock
Open.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 14 }
airFMSysAlarmMapMainModWaterDetected OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Main Module alarm map setting for Water Detected.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapMainModEntry 15 }
-- airFM Exp Module 1 Output Alarm Mapping
airFMSysAlarmMapExpMod1TableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMSysAlarmMapExpMod1Table. "
::= { airFMSysAlarmMapExpMod1 1 }
airFMSysAlarmMapExpMod1Table OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysAlarmMapExpMod1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting alarm map information."
::= { airFMSysAlarmMapExpMod1 2 }
airFMSysAlarmMapExpMod1Entry OBJECT-TYPE
SYNTAX AirFMSysAlarmMapExpMod1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The expansion module 1 alarm map type to reference."
INDEX { airFMSysAlarmMapExpMod1OutputIndex }
::= { airFMSysAlarmMapExpMod1Table 1 }
AirFMSysAlarmMapExpMod1Entry ::=
SEQUENCE {
airFMSysAlarmMapExpMod1OutputIndex INTEGER,
airFMSysAlarmMapExpMod1AnyAlarm INTEGER,
airFMSysAlarmMapExpMod1MaintReq INTEGER,
airFMSysAlarmMapExpMod1CoolFail INTEGER,
airFMSysAlarmMapExpMod1HighSupplyTemp INTEGER,
airFMSysAlarmMapExpMod1LowSupplyTemp INTEGER,
airFMSysAlarmMapExpMod1HumFail INTEGER,
airFMSysAlarmMapExpMod1HumReplCyl INTEGER,
airFMSysAlarmMapExpMod1CondPumpFail INTEGER,
airFMSysAlarmMapExpMod1BlwrCntl1Fail INTEGER,
airFMSysAlarmMapExpMod1BlwrCntl2Fail INTEGER,
airFMSysAlarmMapExpMod1HighFltrDP INTEGER,
airFMSysAlarmMapExpMod1LowAirFlow INTEGER,
airFMSysAlarmMapExpMod1AirBlckIntOpen INTEGER,
airFMSysAlarmMapExpMod1WaterDetected INTEGER
}
airFMSysAlarmMapExpMod1OutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { airFMSysAlarmMapExpMod1Entry 1 }
airFMSysAlarmMapExpMod1AnyAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 2 }
airFMSysAlarmMapExpMod1MaintReq OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Module Maintenance
Required.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 3 }
airFMSysAlarmMapExpMod1CoolFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Module Cooling
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 4 }
airFMSysAlarmMapExpMod1HighSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for High Supply
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 5 }
airFMSysAlarmMapExpMod1LowSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Low Supply
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 6 }
airFMSysAlarmMapExpMod1HumFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Humidifier Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 7 }
airFMSysAlarmMapExpMod1HumReplCyl OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Humidifier Replace
Cylinder.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 8 }
airFMSysAlarmMapExpMod1CondPumpFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Condensate Pump
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 9 }
airFMSysAlarmMapExpMod1BlwrCntl1Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Blower Controller 1
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 10 }
airFMSysAlarmMapExpMod1BlwrCntl2Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Blower Controller 2
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 11 }
airFMSysAlarmMapExpMod1HighFltrDP OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for High Filter
Differential Pressure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 12 }
airFMSysAlarmMapExpMod1LowAirFlow OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Low Air Flow.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 13 }
airFMSysAlarmMapExpMod1AirBlckIntOpen OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Air Block Interlock
Open.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 14 }
airFMSysAlarmMapExpMod1WaterDetected OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 1 alarm map setting for Water Detected.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod1Entry 15 }
-- airFM Expansion Module 2 Output Alarm Mapping
airFMSysAlarmMapExpMod2TableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the
airFMSysAlarmMapExpMod2Table."
::= { airFMSysAlarmMapExpMod2 1 }
airFMSysAlarmMapExpMod2Table OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysAlarmMapExpMod2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting alarm map information."
::= { airFMSysAlarmMapExpMod2 2 }
airFMSysAlarmMapExpMod2Entry OBJECT-TYPE
SYNTAX AirFMSysAlarmMapExpMod2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The expansion module 2 alarm map type to reference."
INDEX { airFMSysAlarmMapExpMod2OutputIndex }
::= { airFMSysAlarmMapExpMod2Table 1 }
AirFMSysAlarmMapExpMod2Entry ::=
SEQUENCE {
airFMSysAlarmMapExpMod2OutputIndex INTEGER,
airFMSysAlarmMapExpMod2AnyAlarm INTEGER,
airFMSysAlarmMapExpMod2MaintReq INTEGER,
airFMSysAlarmMapExpMod2CoolFail INTEGER,
airFMSysAlarmMapExpMod2HighSupplyTemp INTEGER,
airFMSysAlarmMapExpMod2LowSupplyTemp INTEGER,
airFMSysAlarmMapExpMod2HumFail INTEGER,
airFMSysAlarmMapExpMod2HumReplCyl INTEGER,
airFMSysAlarmMapExpMod2CondPumpFail INTEGER,
airFMSysAlarmMapExpMod2BlwrCntl1Fail INTEGER,
airFMSysAlarmMapExpMod2BlwrCntl2Fail INTEGER,
airFMSysAlarmMapExpMod2HighFltrDP INTEGER,
airFMSysAlarmMapExpMod2LowAirFlow INTEGER,
airFMSysAlarmMapExpMod2AirBlckIntOpen INTEGER,
airFMSysAlarmMapExpMod2WaterDetected INTEGER
}
airFMSysAlarmMapExpMod2OutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { airFMSysAlarmMapExpMod2Entry 1 }
airFMSysAlarmMapExpMod2AnyAlarm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 2 }
airFMSysAlarmMapExpMod2MaintReq OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Module Maintenance
Required.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 3 }
airFMSysAlarmMapExpMod2CoolFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Module Cooling
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 4 }
airFMSysAlarmMapExpMod2HighSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for High Supply
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 5 }
airFMSysAlarmMapExpMod2LowSupplyTemp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Low Supply
Temperature.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 6 }
airFMSysAlarmMapExpMod2HumFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Humidifier Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 7 }
airFMSysAlarmMapExpMod2HumReplCyl OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Humidifier Replace
Cylinder.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 8 }
airFMSysAlarmMapExpMod2CondPumpFail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Condensate Pump
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 9 }
airFMSysAlarmMapExpMod2BlwrCntl1Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Blower Controller 1
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 10 }
airFMSysAlarmMapExpMod2BlwrCntl2Fail OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Blower Controller 2
Failure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 11 }
airFMSysAlarmMapExpMod2HighFltrDP OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for High Filter
Differential Pressure.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 12 }
airFMSysAlarmMapExpMod2LowAirFlow OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Low Air Flow.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 13 }
airFMSysAlarmMapExpMod2AirBlckIntOpen OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Air Block Interlock
Open.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 14 }
airFMSysAlarmMapExpMod2WaterDetected OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Exp Module 2 alarm map setting for Water Detected.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapExpMod2Entry 15 }
-- airFM Input Alarm Mapping
airFMSysAlarmMapInputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMSysAlarmMapInputTable. "
::= { airFMSysAlarmMapInput 1 }
airFMSysAlarmMapInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysAlarmMapInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting alarm map information."
::= { airFMSysAlarmMapInput 2 }
airFMSysAlarmMapInputEntry OBJECT-TYPE
SYNTAX AirFMSysAlarmMapInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contact alarm map type to reference."
INDEX { airFMSysAlarmMapInputOutputIndex }
::= { airFMSysAlarmMapInputTable 1 }
AirFMSysAlarmMapInputEntry ::=
SEQUENCE {
airFMSysAlarmMapInputOutputIndex INTEGER,
airFMSysAlarmMapInput1 INTEGER,
airFMSysAlarmMapInput2 INTEGER,
airFMSysAlarmMapInput3 INTEGER,
airFMSysAlarmMapInput4 INTEGER,
airFMSysAlarmMapInput5 INTEGER,
airFMSysAlarmMapInput6 INTEGER,
airFMSysAlarmMapInput7 INTEGER,
airFMSysAlarmMapInput8 INTEGER,
airFMSysAlarmMapInput9 INTEGER,
airFMSysAlarmMapInput10 INTEGER,
airFMSysAlarmMapInput11 INTEGER,
airFMSysAlarmMapInput12 INTEGER,
airFMSysAlarmMapInput13 INTEGER,
airFMSysAlarmMapInput14 INTEGER,
airFMSysAlarmMapInput15 INTEGER,
airFMSysAlarmMapInput16 INTEGER
}
airFMSysAlarmMapInputOutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { airFMSysAlarmMapInputEntry 1 }
airFMSysAlarmMapInput1 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 1 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 2 }
airFMSysAlarmMapInput2 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 2 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 3 }
airFMSysAlarmMapInput3 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 3 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 4 }
airFMSysAlarmMapInput4 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 4 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 5 }
airFMSysAlarmMapInput5 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 5 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 6 }
airFMSysAlarmMapInput6 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 6 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 7 }
airFMSysAlarmMapInput7 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 7 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 8 }
airFMSysAlarmMapInput8 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 8 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 9 }
airFMSysAlarmMapInput9 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 9 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 10 }
airFMSysAlarmMapInput10 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 10 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 11 }
airFMSysAlarmMapInput11 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 11 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 12 }
airFMSysAlarmMapInput12 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 12 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 13 }
airFMSysAlarmMapInput13 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 13 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 14 }
airFMSysAlarmMapInput14 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 14 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 15 }
airFMSysAlarmMapInput15 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 15 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 16 }
airFMSysAlarmMapInput16 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Input contact 16 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapInputEntry 17 }
-- airFM Output Alarm Mapping
airFMSysAlarmMapOutputTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the
airFMSysAlarmMapOutputTable. "
::= { airFMSysAlarmMapOutput 1 }
airFMSysAlarmMapOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMSysAlarmMapOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting alarm map information."
::= { airFMSysAlarmMapOutput 2 }
airFMSysAlarmMapOutputEntry OBJECT-TYPE
SYNTAX AirFMSysAlarmMapOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contact alarm map type to reference."
INDEX { airFMSysAlarmMapOutputIndex }
::= { airFMSysAlarmMapOutputTable 1 }
AirFMSysAlarmMapOutputEntry ::=
SEQUENCE {
airFMSysAlarmMapOutputIndex INTEGER,
airFMSysAlarmMapOutput1 INTEGER,
airFMSysAlarmMapOutput2 INTEGER,
airFMSysAlarmMapOutput3 INTEGER,
airFMSysAlarmMapOutput4 INTEGER,
airFMSysAlarmMapOutput5 INTEGER,
airFMSysAlarmMapOutput6 INTEGER,
airFMSysAlarmMapOutput7 INTEGER,
airFMSysAlarmMapOutput8 INTEGER,
airFMSysAlarmMapOutput9 INTEGER,
airFMSysAlarmMapOutput10 INTEGER,
airFMSysAlarmMapOutput11 INTEGER,
airFMSysAlarmMapOutput12 INTEGER,
airFMSysAlarmMapOutput13 INTEGER,
airFMSysAlarmMapOutput14 INTEGER,
airFMSysAlarmMapOutput15 INTEGER,
airFMSysAlarmMapOutput16 INTEGER
}
airFMSysAlarmMapOutputIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the output relay."
::= { airFMSysAlarmMapOutputEntry 1 }
airFMSysAlarmMapOutput1 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 1 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 2 }
airFMSysAlarmMapOutput2 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 2 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 3 }
airFMSysAlarmMapOutput3 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 3 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 4 }
airFMSysAlarmMapOutput4 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 4 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 5 }
airFMSysAlarmMapOutput5 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 5 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 6 }
airFMSysAlarmMapOutput6 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 6 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 7 }
airFMSysAlarmMapOutput7 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 7 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 8 }
airFMSysAlarmMapOutput8 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 8 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 9 }
airFMSysAlarmMapOutput9 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 9 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 10 }
airFMSysAlarmMapOutput10 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 10 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 11 }
airFMSysAlarmMapOutput11 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 11 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 12 }
airFMSysAlarmMapOutput12 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 12 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 13 }
airFMSysAlarmMapOutput13 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 13 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 14 }
airFMSysAlarmMapOutput14 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 14 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 15 }
airFMSysAlarmMapOutput15 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 15 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 16 }
airFMSysAlarmMapOutput16 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disabled (2),
enabled (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output relay 16 alarm map setting.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMSysAlarmMapOutputEntry 17 }
-- airFM Module Identification Table
airFMModIdentTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModIdentTable. "
::= { airFMModIdent 1 }
airFMModIdentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModIdent 2 }
airFMModIdentEntry OBJECT-TYPE
SYNTAX AirFMModIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModIdentModuleIndex }
::= { airFMModIdentTable 1 }
AirFMModIdentEntry ::=
SEQUENCE {
airFMModIdentModuleIndex INTEGER,
airFMModModelNumber DisplayString,
airFMModSerialNumber DisplayString,
airFMModManufactureDate DisplayString,
airFMModFirmwareRev DisplayString,
airFMModHardwareRev DisplayString
}
airFMModIdentModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModIdentEntry 1 }
airFMModModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Model number of the Module."
::= { airFMModIdentEntry 2 }
airFMModSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique identification number for this Module."
::= { airFMModIdentEntry 3 }
airFMModManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date the Module was manufactured."
::= { airFMModIdentEntry 4 }
airFMModFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Revision number of the firmware installed on this
Module."
::= { airFMModIdentEntry 5 }
airFMModHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Revision number of the hardware installed on this
Module."
::= { airFMModIdentEntry 6 }
-- airFM Module Status Table
airFMModStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModStatusTable. "
::= { airFMModStatus 1 }
airFMModStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModStatus 2 }
airFMModStatusEntry OBJECT-TYPE
SYNTAX AirFMModStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModStatusModuleIndex }
::= { airFMModStatusTable 1 }
AirFMModStatusEntry ::=
SEQUENCE {
airFMModStatusModuleIndex INTEGER,
airFMModSupplyTempC INTEGER,
airFMModSupplyTempF INTEGER,
airFMModSupplyHum INTEGER,
airFMModReturnTempC INTEGER,
airFMModReturnTempF INTEGER,
airFMModReturnHum INTEGER,
airFMModFilterDiffPresPa INTEGER,
airFMModFilterDiffPresInWC INTEGER,
airFMModCoilDiffPresPa INTEGER,
airFMModCoilDiffPresInWC INTEGER
}
airFMModStatusModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModStatusEntry 1 }
airFMModSupplyTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature measured at the supply sensor.
Measured in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 2 }
airFMModSupplyTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature measured at the supply sensor.
Measured in tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 3 }
airFMModSupplyHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The humidity measured at the supply sensor.
Measured in tenths of percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 4 }
airFMModReturnTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature measured at the return sensor.
Measured in tenths of degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 5 }
airFMModReturnTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature measured at the return sensor.
Measured in tenths of degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 6 }
airFMModReturnHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The humidity measured at the return sensor.
Measured in tenths of percent relative humidity.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 7 }
airFMModFilterDiffPresPa OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The difference in pressure on either side of the air
filters. A high differential pressure indicates a
clogged filter. Measured in Pascals.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 8 }
airFMModFilterDiffPresInWC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The difference in pressure on either side of the air
filters. A high differential pressure indicates a
clogged filter. Measured in hundredths of inches
water column.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 9 }
airFMModCoilDiffPresPa OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The difference in pressure on either side of the
cooling/dehumidification coils. Measured in Pascals.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 10 }
airFMModCoilDiffPresInWC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The difference in pressure on either side of the
cooling/dehumidification coils. Measured in
hundredths of inches water column.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModStatusEntry 11 }
-- airFM Module Properties Table
airFMModPropTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModPropTable. "
::= { airFMModProperties 1 }
airFMModPropTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModPropEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModProperties 2 }
airFMModPropEntry OBJECT-TYPE
SYNTAX AirFMModPropEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModPropModuleIndex }
::= { airFMModPropTable 1 }
AirFMModPropEntry ::=
SEQUENCE {
airFMModPropModuleIndex INTEGER,
airFMModOutputCapacity INTEGER,
airFMModCapacityCtrl INTEGER,
airFMModHeaterType INTEGER,
airFMModElectricHeaterType INTEGER,
airFMModHumidifierType INTEGER,
airFMModBlwrFreqSetting INTEGER,
airFMModNomCoilDiffPresPa INTEGER,
airFMModNomCoilDiffPresInWC INTEGER,
airFMModCondPump INTEGER,
airFMModFireDetector INTEGER,
airFMModSmokeDetector INTEGER,
airFMModWaterDetector INTEGER
}
airFMModPropModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModPropEntry 1 }
airFMModOutputCapacity OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
kw45 (2),
kw35 (3),
kw40 (4),
kw50 (5),
kw80 (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling capacity (in Kilowatts) of the displayed
Module.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 2 }
airFMModCapacityCtrl OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
tandem (2),
hotGasBypass (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The method used to load and unload the compressors.
Tandem compressor Modules use two stages (one
compressor each). Single compressor Modules use hot
gas bypass.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 3 }
airFMModHeaterType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
electricSCR (3),
steam (4),
hotWaterOnOff (5),
hotGasReheat (6),
hotGasAndElectric (7),
hotWaterProp (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of reheating device installed in this Module.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 4 }
airFMModElectricHeaterType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
kw10 (2),
kw15 (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type/capacity of the electric heater, if installed.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 5 }
airFMModHumidifierType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
steamElectrode (3),
liveSteam (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of equipment installed in the Module to run
the humidification mode.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 6 }
airFMModBlwrFreqSetting OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frequency of the blower in tenths of hertz.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModPropEntry 7 }
airFMModNomCoilDiffPresPa OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The difference in pressure on either side of the
cooling/dehumidification coils. Measured in Pascals.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModPropEntry 8 }
airFMModNomCoilDiffPresInWC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The difference in pressure on either side of the
cooling/dehumidification coils. Measured in
hundredths of inches water column.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModPropEntry 9 }
airFMModCondPump OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
notPresent (2),
present (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the presence of a condensate pump in the
Modules of this System.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 10 }
airFMModFireDetector OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
notPresent (2),
present (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the presence of a fire detector for each
of the Modules in this System.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 11 }
airFMModSmokeDetector OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
notPresent (2),
present (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the presence of a smoke detector for each
of the Modules in this System.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 12 }
airFMModWaterDetector OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
notPresent (2),
present (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the presence of a water leak detector for
each of the Modules in this System.
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModPropEntry 13 }
-- airFM Module Cooling Table
airFMModCoolTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModCoolTable. "
::= { airFMModCooling 1 }
airFMModCoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModCoolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModCooling 2 }
airFMModCoolEntry OBJECT-TYPE
SYNTAX AirFMModCoolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModCoolModuleIndex }
::= { airFMModCoolTable 1 }
AirFMModCoolEntry ::=
SEQUENCE {
airFMModCoolModuleIndex INTEGER,
airFMModComp1 INTEGER,
airFMModComp2 INTEGER,
airFMModSuctPresKPa INTEGER,
airFMModSuctPresPSI INTEGER,
airFMModDischPresKPa INTEGER,
airFMModDischPresPSI INTEGER,
airFMModCondFluidVlvPos INTEGER,
airFMModCoilFluidVlvPos INTEGER
}
airFMModCoolModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModCoolEntry 1 }
airFMModComp1 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
on (2),
off (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of compressor 1 of the tandem compressor
unit (on or off).
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModCoolEntry 2 }
airFMModComp2 OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
on (2),
off (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of compressor 2 of the tandem compressor
unit (on or off).
A value of notApplicable indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModCoolEntry 3 }
airFMModSuctPresKPa OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The refrigerant pressure measured at the suction
inlet of the compressor. Measured in kiloPascals.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModCoolEntry 4 }
airFMModSuctPresPSI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The refrigerant pressure measured at the suction
inlet of the compressor. Measured in pounds per
square inch.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModCoolEntry 5 }
airFMModDischPresKPa OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The refrigerant pressure measured at the discharge
outlet of the compressor. Measured in kiloPascals.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModCoolEntry 6 }
airFMModDischPresPSI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The refrigerant pressure measured at the discharge
outlet of the compressor. Measured in pounds per
square inch.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModCoolEntry 7 }
airFMModCondFluidVlvPos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the condenser fluid valve. The valve
regulates the flow of liquid coolant into the heat
exchanger (condenser). 100% indicates the valve is
completely open, and 0% indicates that the valve is
closed. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModCoolEntry 8 }
airFMModCoilFluidVlvPos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the coil fluid valve. The valve
regulates the flow of liquid coolant in the fluid
cooling coil (MultiCool, Economizer, or Chilled
Water). 100% indicates the valve is completely open,
and 0% indicates that the valve is closed. Measured
in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModCoolEntry 9 }
-- airFM Module Humidity Control Table
airFMModHumTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModHumTable. "
::= { airFMModHumidity 1 }
airFMModHumTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModHumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModHumidity 2 }
airFMModHumEntry OBJECT-TYPE
SYNTAX AirFMModHumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModHumModuleIndex }
::= { airFMModHumTable 1 }
AirFMModHumEntry ::=
SEQUENCE {
airFMModHumModuleIndex INTEGER,
airFMModHumidifier INTEGER,
airFMModElectrodeCurrent INTEGER,
airFMModHumActualOutput INTEGER,
airFMModWaterConductivity INTEGER,
airFMModHotWaterVlvPos INTEGER,
airFMModStmElectHumMode INTEGER
}
airFMModHumModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModHumEntry 1 }
airFMModHumidifier OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
none (2),
steamElectrode (3),
liveSteam (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of equipment installed in the Module to run
the humidification mode.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModHumEntry 2 }
airFMModElectrodeCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current drawn by the electrodes of the steam
cylinder humidifier. Measured in tenths of amps.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModHumEntry 3 }
airFMModHumActualOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The humidification output of an individual Module.
Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModHumEntry 4 }
airFMModWaterConductivity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The conductivity of the water in the humidifier
cylinder. Measured in microSiemens per centimeter.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModHumEntry 5 }
airFMModHotWaterVlvPos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the hot water valve. 100% indicates
the valve is completely open, and 0% indicates that
the valve is closed. Measured in percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModHumEntry 6 }
airFMModStmElectHumMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
off (2),
auto (3),
drain (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the humidifier function mode.
Off: Remove power from electrodes.
Auto: Humidifier controlled by Module controller.
Drain: Remove power from electrodes and drain the cylinder.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModHumEntry 7 }
-- airFM Module Blower 1 Table
airFMModBlwr1TableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModBlwr1Table. "
::= { airFMModBlower1 1 }
airFMModBlwr1Table OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModBlwr1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModBlower1 2 }
airFMModBlwr1Entry OBJECT-TYPE
SYNTAX AirFMModBlwr1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModBlwr1ModuleIndex }
::= { airFMModBlwr1Table 1 }
AirFMModBlwr1Entry ::=
SEQUENCE {
airFMModBlwr1ModuleIndex INTEGER,
airFMModBlwr1CtrlType INTEGER,
airFMModBlwr1CmdFreq INTEGER,
airFMModBlwr1ActFreq INTEGER,
airFMModBlwr1Poles INTEGER,
airFMModBlwr1RatedHorsePower INTEGER,
airFMModBlwr1RatedCurrent INTEGER,
airFMModBlwr1ActTorq INTEGER,
airFMModBlwr1Current INTEGER,
airFMModBlwr1Vlt INTEGER,
airFMModBlwr1DCLinkVlt INTEGER,
airFMModBlwr1AccTime INTEGER,
airFMModBlwr1DecTime INTEGER,
airFMModBlwr1CapLife INTEGER,
airFMModBlwr1CtrlCoolFanLife INTEGER,
airFMModBlwr1ElOvMode INTEGER,
airFMModBlwr1ElOvSetting INTEGER,
airFMModBlwr1ElOvTimeConst INTEGER,
airFMModBlwr1FanPower INTEGER,
airFMModBlwr1HeatsinkTempC INTEGER,
airFMModBlwr1HeatsinkTempF INTEGER,
airFMModBlwr1ChokeTempC INTEGER,
airFMModBlwr1ChokeTempF INTEGER,
airFMModBlwr1InverterTempC INTEGER,
airFMModBlwr1InverterTempF INTEGER
}
airFMModBlwr1ModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModBlwr1Entry 1 }
airFMModBlwr1CtrlType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
fujiVFD (2),
ecController (3),
danfossVFD (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of blower controller.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 2 }
airFMModBlwr1CmdFreq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The requested operating frequency for the blower.
Measured in tenths of hertz.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 3 }
airFMModBlwr1ActFreq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency at which the blower controller is
operating. Measured in tenths of hertz.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 4 }
airFMModBlwr1Poles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of poles of the blower motor that the
blower controller is controlling.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 5 }
airFMModBlwr1RatedHorsePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power rating of the blower motor. Measured in
hundredths of horsepower.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 6 }
airFMModBlwr1RatedCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current rating of the blower motor. Measured in
hundredths of amps.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 7 }
airFMModBlwr1ActTorq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual torque of the blower motor. Measured in
hundredths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 8 }
airFMModBlwr1Current OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percent of rated current drawn by the blower
motor. Measured in hundredths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 9 }
airFMModBlwr1Vlt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage supplied to the blower motor. Measured
in tenths of volts RMS.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 10 }
airFMModBlwr1DCLinkVlt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage of the blower controller's DC bus.
Measured in volts DC.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 11 }
airFMModBlwr1AccTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time to accelerate the blower to the specified
frequency. Measured in tenths of seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 12 }
airFMModBlwr1DecTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time to decelerate the blower frequency to zero.
Measured in tenths of seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 13 }
airFMModBlwr1CapLife OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remaining life of the main circuit capacitor.
Measured in tenths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 14 }
airFMModBlwr1CtrlCoolFanLife OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total operation time of the blower controller
cooling fan. Measured in hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 15 }
airFMModBlwr1ElOvMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
inactive (2),
active (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enables or disables the electronic overload relay.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 16 }
airFMModBlwr1ElOvSetting OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The electronic overload relay is activated when the
current exceeds this threshold. Measured in
hundredths of amps.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 17 }
airFMModBlwr1ElOvTimeConst OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The delay between the current exceeding the overload
threshold and the activation of the electronic
overload relay. Measured in tenths of minutes.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 18 }
airFMModBlwr1FanPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual power of the blower motor. Measured in
tenths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 19 }
airFMModBlwr1HeatsinkTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the heatsink on the blower
controller. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 20 }
airFMModBlwr1HeatsinkTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the heatsink on the blower
controller. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 21 }
airFMModBlwr1ChokeTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the choke on the blower
controller. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 22 }
airFMModBlwr1ChokeTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the choke on the blower
controller. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 23 }
airFMModBlwr1InverterTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the inverter on the blower
controller. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 24 }
airFMModBlwr1InverterTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the inverter on the blower
controller. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr1Entry 25 }
-- airFM Module Blower 2 Table
airFMModBlwr2TableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModBlwr2Table. "
::= { airFMModBlower2 1 }
airFMModBlwr2Table OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModBlwr2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModBlower2 2 }
airFMModBlwr2Entry OBJECT-TYPE
SYNTAX AirFMModBlwr2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModBlwr2ModuleIndex }
::= { airFMModBlwr2Table 1 }
AirFMModBlwr2Entry ::=
SEQUENCE {
airFMModBlwr2ModuleIndex INTEGER,
airFMModBlwr2CtrlType INTEGER,
airFMModBlwr2CmdFreq INTEGER,
airFMModBlwr2ActFreq INTEGER,
airFMModBlwr2Poles INTEGER,
airFMModBlwr2RatedHorsePower INTEGER,
airFMModBlwr2RatedCurrent INTEGER,
airFMModBlwr2ActTorq INTEGER,
airFMModBlwr2Current INTEGER,
airFMModBlwr2Vlt INTEGER,
airFMModBlwr2DCLinkVlt INTEGER,
airFMModBlwr2AccTime INTEGER,
airFMModBlwr2DecTime INTEGER,
airFMModBlwr2CapLife INTEGER,
airFMModBlwr2CtrlCoolFanLife INTEGER,
airFMModBlwr2ElOvMode INTEGER,
airFMModBlwr2ElOvSetting INTEGER,
airFMModBlwr2ElOvTimeConst INTEGER,
airFMModBlwr2FanPower INTEGER,
airFMModBlwr2HeatsinkTempC INTEGER,
airFMModBlwr2HeatsinkTempF INTEGER,
airFMModBlwr2ChokeTempC INTEGER,
airFMModBlwr2ChokeTempF INTEGER,
airFMModBlwr2InverterTempC INTEGER,
airFMModBlwr2InverterTempF INTEGER
}
airFMModBlwr2ModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModBlwr2Entry 1 }
airFMModBlwr2CtrlType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
fujiVFD (2),
ecController (3),
danfossVFD (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of blower controller.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 2 }
airFMModBlwr2CmdFreq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The requested operating frequency for the blower.
Measured in tenths of hertz.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 3 }
airFMModBlwr2ActFreq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency at which the blower controller is
operating. Measured in tenths of hertz.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 4 }
airFMModBlwr2Poles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of poles of the blower motor that the
blower controller is controlling.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 5 }
airFMModBlwr2RatedHorsePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power rating of the blower motor. Measured in
hundredths of horsepower.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 6 }
airFMModBlwr2RatedCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current rating of the blower motor. Measured in
hundredths of amps.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 7 }
airFMModBlwr2ActTorq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual torque of the blower motor. Measured in
hundredths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 8 }
airFMModBlwr2Current OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percent of rated current drawn by the blower
motor. Measured in hundredths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 9 }
airFMModBlwr2Vlt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage supplied to the blower motor. Measured
in tenths of volts RMS.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 10 }
airFMModBlwr2DCLinkVlt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage of the blower controller's DC bus.
Measured in volts DC.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 11 }
airFMModBlwr2AccTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time to accelerate the blower to the specified
frequency. Measured in tenths of seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 12 }
airFMModBlwr2DecTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time to decelerate the blower frequency to zero.
Measured in tenths of seconds.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 13 }
airFMModBlwr2CapLife OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remaining life of the main circuit capacitor.
Measured in tenths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 14 }
airFMModBlwr2CtrlCoolFanLife OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total operation time of the blower controller
cooling fan. Measured in hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 15 }
airFMModBlwr2ElOvMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
inactive (2),
active (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enables or disables the electronic overload relay.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 16 }
airFMModBlwr2ElOvSetting OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The electronic overload relay is activated when the
current exceeds this threshold. Measured in
hundredths of amps.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 17 }
airFMModBlwr2ElOvTimeConst OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The delay between the current exceeding the overload
threshold and the activation of the electronic
overload relay. Measured in tenths of minutes.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 18 }
airFMModBlwr2FanPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual power of the blower motor. Measured in
tenths of percent.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 19 }
airFMModBlwr2HeatsinkTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the heatsink on the blower
controller. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 20 }
airFMModBlwr2HeatsinkTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the heatsink on the blower
controller. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 21 }
airFMModBlwr2ChokeTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the choke on the blower
controller. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 22 }
airFMModBlwr2ChokeTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the choke on the blower
controller. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 23 }
airFMModBlwr2InverterTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the inverter on the blower
controller. Measured in degrees Celsius.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 24 }
airFMModBlwr2InverterTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the inverter on the blower
controller. Measured in degrees Fahrenheit.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModBlwr2Entry 25 }
-- airFM Module Run Hours Table
airFMModRHTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModRHTable. "
::= { airFMModRunHours 1 }
airFMModRHTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModRHEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModRunHours 2 }
airFMModRHEntry OBJECT-TYPE
SYNTAX AirFMModRHEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModRHModuleIndex }
::= { airFMModRHTable 1 }
AirFMModRHEntry ::=
SEQUENCE {
airFMModRHModuleIndex INTEGER,
airFMModRHComp1 INTEGER,
airFMModRHComp2 INTEGER,
airFMModRHHeater INTEGER,
airFMModRHHum INTEGER,
airFMModRHBlwr1 INTEGER,
airFMModRHBlwr2 INTEGER,
airFMModRHBlwrCtrl1 INTEGER,
airFMModRHBlwrCtrl2 INTEGER,
airFMModRHComp1Reset INTEGER,
airFMModRHComp2Reset INTEGER,
airFMModRHHeaterReset INTEGER,
airFMModRHHumReset INTEGER,
airFMModRHBlwr1Reset INTEGER,
airFMModRHBlwr2Reset INTEGER
}
airFMModRHModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModRHEntry 1 }
airFMModRHComp1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 1 run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 2 }
airFMModRHComp2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 2 run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 3 }
airFMModRHHeater OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Heater run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 4 }
airFMModRHHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier run hours
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 5 }
airFMModRHBlwr1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blower 1 run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 6 }
airFMModRHBlwr2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blower 2 run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 7 }
airFMModRHBlwrCtrl1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blower Controller 1 run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 8 }
airFMModRHBlwrCtrl2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blower Controller 2 run hours.
A value of -2147483648 indicates that this OID
does not apply to this device due to its configuration."
::= { airFMModRHEntry 9 }
airFMModRHComp1Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the compressor 1 run hours.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModRHEntry 10 }
airFMModRHComp2Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the compressor 2 run hours.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModRHEntry 11 }
airFMModRHHeaterReset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the heater run hours.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModRHEntry 12 }
airFMModRHHumReset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the humidifier run hours.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModRHEntry 13 }
airFMModRHBlwr1Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the blower 1 run hours.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModRHEntry 14 }
airFMModRHBlwr2Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the blower 2 run hours.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModRHEntry 15 }
-- airFM Module Service Intervals
airFMModServIntComp1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for compressor 1. Values stored in increments of 100
hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 1 }
airFMModServIntComp2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for compressor 2. Values stored in increments of 100
hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 2 }
airFMModServIntHeater OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for the reheat components. Values stored in
increments of 100 hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 3 }
airFMModServIntHum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for the humidifier. Values stored in increments of
100 hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 4 }
airFMModServIntBlwr1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for blower 1. Values stored in increments of 100
hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 5 }
airFMModServIntBlwr2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for blower 2. Values stored in increments of 100
hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 6 }
airFMModServIntBlwrCtrl1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for blower controller 1. Values stored in increments
of 100 hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 7 }
airFMModServIntBlwrCtrl2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which to generate a maintenance alarm
for blower controller 2. Values stored in increments
of 100 hours.
A value of -2147483648 indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntervals 8 }
-- airFM Module Service Intervals Reset Table
airFMModServIntResetTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the airFMModServIntTable. "
::= { airFMModServIntResets 1 }
airFMModServIntResetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMModServIntResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each module in
the system. "
::= { airFMModServIntResets 2 }
airFMModServIntResetEntry OBJECT-TYPE
SYNTAX AirFMModServIntResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The module to get information from."
INDEX { airFMModServIntResetModuleIndex }
::= { airFMModServIntResetTable 1 }
AirFMModServIntResetEntry ::=
SEQUENCE {
airFMModServIntResetModuleIndex INTEGER,
airFMModServIntComp1Reset INTEGER,
airFMModServIntComp2Reset INTEGER,
airFMModServIntHeaterReset INTEGER,
airFMModServIntHumReset INTEGER,
airFMModServIntBlwr1Reset INTEGER,
airFMModServIntBlwr2Reset INTEGER,
airFMModServIntBlwrCtrl1Reset INTEGER,
airFMModServIntBlwrCtrl2Reset INTEGER
}
airFMModServIntResetModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the module."
::= { airFMModServIntResetEntry 1 }
airFMModServIntComp1Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the compressor 1 service interval maintenance
alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 2 }
airFMModServIntComp2Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the compressor 2 service interval maintenance
alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 3 }
airFMModServIntHeaterReset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the heater service interval maintenance alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 4 }
airFMModServIntHumReset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the humidifier service interval maintenance
alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 5 }
airFMModServIntBlwr1Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the blower 1 service interval maintenance
alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 6 }
airFMModServIntBlwr2Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the blower 2 service interval maintenance
alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 7 }
airFMModServIntBlwrCtrl1Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the blower controller 1 service interval
maintenance alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 8 }
airFMModServIntBlwrCtrl2Reset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
noOperation (2),
reset (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the blower controller 2 service interval
maintenance alarm.
Getting this OID will do nothing and return the
noOperation value.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration."
::= { airFMModServIntResetEntry 9 }
-- airFM Alarms Table
airFMAlarmClearActiveGroupAlarms OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
clearAlarms (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear active group alarms. If alarm conditions are
still present, new alarms will be generated for those
conditions.
Getting this OID will do nothing and return the
noOperation value."
::= { airFMAlarms 1 }
airFMAlarmClearActiveSysModAlarms OBJECT-TYPE
SYNTAX INTEGER {
noOperation (1),
clearAlarms (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear active system and module alarms. If alarm
conditions are still present, new alarms will be
generated for those conditions.
Getting this OID will do nothing and return the
noOperation value."
::= { airFMAlarms 2 }
airFMAlarmConditionsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active alarm conditions in the
airFMAlarmConditionTable."
::= { airFMAlarms 3 }
airFMAlarmConditionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirFMAlarmConditionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of active alarm conditions for the device."
::= { airFMAlarms 4 }
airFMAlarmConditionsEntry OBJECT-TYPE
SYNTAX AirFMAlarmConditionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Alarm condition specification"
INDEX { airFMAlarmConditionsIndex }
::= { airFMAlarmConditionsTable 1 }
AirFMAlarmConditionsEntry ::= SEQUENCE {
airFMAlarmConditionsIndex INTEGER,
airFMAlarmSeverity INTEGER,
airFMAlarmType INTEGER,
airFMEventCode INTEGER,
airFMAlarmDate DisplayString,
airFMAlarmTime DisplayString,
airFMAlarmDescription DisplayString
}
airFMAlarmConditionsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Alarm condition index."
::= { airFMAlarmConditionsEntry 1 }
airFMAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
informational (1),
warningMinor (2),
criticalMajor (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Severity of the alarm."
::= { airFMAlarmConditionsEntry 2 }
airFMAlarmType OBJECT-TYPE
SYNTAX INTEGER {
group (1),
system (2),
mainMod (3),
expMod1 (4),
expMod2 (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Type of alarm."
::= { airFMAlarmConditionsEntry 3 }
airFMEventCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "APC event code for the alarm."
::= { airFMAlarmConditionsEntry 4 }
airFMAlarmDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Date the alarm was recorded."
::= { airFMAlarmConditionsEntry 5 }
airFMAlarmTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Time the alarm was recorded."
::= { airFMAlarmConditionsEntry 6 }
airFMAlarmDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of the alarm."
::= { airFMAlarmConditionsEntry 7 }
-- airPA Portable Air Conditioner Ident
airPAIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the device name."
::= { airPAIdent 1 }
airPAModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the device model number."
::= { airPAIdent 2 }
airPADateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying when the device was produced."
::= { airPAIdent 3 }
airPASerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the device serial number."
::= { airPAIdent 4 }
airPAFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the device firmware revision."
::= { airPAIdent 5 }
airPAHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the device hardware revision."
::= { airPAIdent 6 }
-- airPA Portable Air Conditioner Status
airPASystemPower OBJECT-TYPE
SYNTAX INTEGER {
powerON (1),
powerOFF (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the unit's system power setting.
ON(1) The system power is turned on.
OFF(2) The system power is turned off. "
::= { airPAStatus 1 }
airPAOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
modeOFF (1),
modeVENTING (2),
modeCOOLING (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operating mode of the unit.
OFF(1) The system is off.
VENTING(2) The system's venting function is active.
COOLING(3) The system's cooling function is active. "
::= { airPAStatus 2 }
airPASetpointTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature setpoint in Fahrenheit to which the unit is controlling. "
::= { airPAStatus 3 }
airPASetpointTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature setpoint in Celsius to which the unity is controlling. "
::= { airPAStatus 4 }
airPABlowerSpeed OBJECT-TYPE
SYNTAX INTEGER {
speedLOW (1),
speedHIGH (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit's blower speed setting.
LOW(1) The blower speed is low.
HIGH(2) The blower speed is high. "
::= { airPAStatus 5 }
airPACompressor OBJECT-TYPE
SYNTAX INTEGER {
statusON (1),
statusOFF (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit's compressor status.
ON(1) The compressor is turned on.
OFF(2) The compressor is turned off. "
::= { airPAStatus 6 }
airPACondenserFan OBJECT-TYPE
SYNTAX INTEGER {
statusON (1),
statusOFF (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit's condenser fan status.
ON(1) The condenser fan is turned on.
OFF(2) The condenser fan is turned off. "
::= { airPAStatus 7 }
airPACondensatePump OBJECT-TYPE
SYNTAX INTEGER {
statusON (1),
statusOFF (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit's condensate pump status.
ON(1) The condensate pump is turned on.
OFF(2) The condensate pump is turned off. "
::= { airPAStatus 8 }
airPASupplyTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The supply temperature in degrees Fahrenheit. "
::= { airPAStatus 9 }
airPASupplyTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The supply temperature in degrees Celsius. "
::= { airPAStatus 10 }
airPAReturnTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The return temperature in degrees Fahrenheit. "
::= { airPAStatus 11 }
airPAReturnTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The return temperature in degrees Celsius. "
::= { airPAStatus 12 }
airPARemoteTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remote temperature in degrees Fahrenheit. "
::= { airPAStatus 13 }
airPARemoteTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remote temperature in degrees Celsius. "
::= { airPAStatus 14 }
airPARemoteHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remote humidity. "
::= { airPAStatus 15 }
-- air InRow Air Conditioners
-- airIR AIR CONDITIONER Alarm Status - shared across all IR products
airIRAlarmConditionsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active alarm conditions in the airIRAlarmConditionTable."
::= { airIRAlarms 1 }
airIRAlarmConditionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRAlarmConditionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of active alarm conditions for the device."
::= { airIRAlarms 2 }
airIRAlarmConditionsEntry OBJECT-TYPE
SYNTAX AirIRAlarmConditionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Alarm condition specification"
INDEX { airIRAlarmConditionsIndex }
::= { airIRAlarmConditionsTable 1 }
AirIRAlarmConditionsEntry ::= SEQUENCE {
airIRAlarmConditionsIndex INTEGER,
airIREventCode INTEGER,
airIRAlarmDescription DisplayString
}
airIRAlarmConditionsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Alarm condition index."
::= { airIRAlarmConditionsEntry 1 }
airIREventCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Code for the alarm."
::= { airIRAlarmConditionsEntry 2 }
airIRAlarmDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of the alarm."
::= { airIRAlarmConditionsEntry 3 }
-- airIRRC AIR CONDITIONER Group Status
airIRRCGroupStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group coolant output in tenths of kW."
::= { airIRRCGroupStatus 1 }
airIRRCGroupStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group coolant demand in tenths of kW."
::= { airIRRCGroupStatus 2 }
airIRRCGroupStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group air flow in cubic feet per minute."
::= { airIRRCGroupStatus 3 }
airIRRCGroupStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group air flow in liters per second."
::= { airIRRCGroupStatus 4 }
airIRRCGroupStatusMaxRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group maximum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRCGroupStatus 5 }
airIRRCGroupStatusMaxRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group maximum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRCGroupStatus 6 }
airIRRCGroupStatusMinRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group minimum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRCGroupStatus 7 }
airIRRCGroupStatusMinRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group minimum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRCGroupStatus 8 }
airIRRCGroupStatusActiveFlowControlStatus OBJECT-TYPE
SYNTAX INTEGER {
under (1),
okay (2),
over (3),
notApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the active flow control
system."
::= { airIRRCGroupStatus 9 }
-- airIRRC AIR CONDITIONER Group Setpoints
airIRRCGroupSetpointsCoolUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRRCGroupSetpoints 1 }
airIRRCGroupSetpointsCoolMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Celsius."
::= { airIRRCGroupSetpoints 2 }
airIRRCGroupSetpointsSupplyAirUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRRCGroupSetpoints 3 }
airIRRCGroupSetpointsSupplyAirMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRRCGroupSetpoints 4 }
airIRRCGroupSetpointsFanSpeedPreference OBJECT-TYPE
SYNTAX INTEGER {
low (1),
med-low (2),
med (3),
med-high (4),
high (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preferred fan speed setting."
::= { airIRRCGroupSetpoints 5 }
airIRRCGroupSetpointsFanSpeedControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The fan speed control setting.
Automatic(1) - controller manages fan speed.
Manual(2) - fan speed is fixed and set by the fan speed preference.
See airIRRCGroupSetpointsFanSpeedPreference."
::= { airIRRCGroupSetpoints 6 }
airIRRCGroupSetpointsActiveFlowControlBias OBJECT-TYPE
SYNTAX INTEGER {
positive (1),
slightlyPositive (2),
zero (3),
slightlyNegative (4),
negative (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The active flow control bias setting."
::= { airIRRCGroupSetpoints 7 }
-- airIRRC AIR CONDITIONER Group Config
airIRRCGroupConfigNumberofCoolingUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cooling units present in the group."
::= { airIRRCGroupConfig 1 }
airIRRCGroupConfigConfigurationType OBJECT-TYPE
SYNTAX INTEGER {
racs (1),
hacs (2),
in-row (3),
cacs (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group configuration type."
::= { airIRRCGroupConfig 2 }
airIRRCGroupConfigPctGlycol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The glycol mixture in percent."
::= { airIRRCGroupConfig 3 }
airIRRCGroupConfigCoolGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the PID in hundredths."
::= { airIRRCGroupConfig 4 }
airIRRCGroupConfigCoolResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the PID in hundredths."
::= { airIRRCGroupConfig 5 }
airIRRCGroupConfigCoolDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the PID in hundredths."
::= { airIRRCGroupConfig 6 }
airIRRCGroupConfigMaxFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum desired fan speed setting in percent."
::= { airIRRCGroupConfig 7 }
airIRRCGroupConfigNumberOfActiveFlowControllers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of active flow controllers
present in the group."
::= { airIRRCGroupConfig 8 }
airIRRCGroupConfigActiveFlowControllerLampTest OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turns off/on the active flow
controller lamp test."
::= { airIRRCGroupConfig 9 }
airIRRCGroupConfigAltitudeUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in feet."
::= { airIRRCGroupConfig 10 }
airIRRCGroupConfigAltitudeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in meters."
::= { airIRRCGroupConfig 11 }
-- airIRRC AIR CONDITIONER UNIT Status
airIRRCUnitStatusOperateMode OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
on (2),
idle (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling unit operating mode."
::= { airIRRCUnitStatus 1 }
airIRRCUnitStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling output in tenths of kW."
::= { airIRRCUnitStatus 2 }
airIRRCUnitStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling demand in tenths of kW."
::= { airIRRCUnitStatus 3 }
airIRRCUnitStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in cubic feet per minute."
::= { airIRRCUnitStatus 4 }
airIRRCUnitStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in hundredths of
liters per second."
::= { airIRRCUnitStatus 5 }
airIRRCUnitStatusRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRCUnitStatus 6 }
airIRRCUnitStatusRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRCUnitStatus 7 }
airIRRCUnitStatusSupplyAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Fahrenheit."
::= { airIRRCUnitStatus 8 }
airIRRCUnitStatusSupplyAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Celsius."
::= { airIRRCUnitStatus 9 }
airIRRCUnitStatusReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Fahrenheit."
::= { airIRRCUnitStatus 10 }
airIRRCUnitStatusReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Celsius."
::= { airIRRCUnitStatus 11 }
airIRRCUnitStatusContainmtDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in
hundredths of inches of water."
::= { airIRRCUnitStatus 12 }
airIRRCUnitStatusContainmtDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in Pa."
::= { airIRRCUnitStatus 13 }
airIRRCUnitStatusFilterDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in
hundredths of inches of water."
::= { airIRRCUnitStatus 14 }
airIRRCUnitStatusFilterDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in Pa."
::= { airIRRCUnitStatus 15 }
airIRRCUnitStatusFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit average fan speed in tenths of percent."
::= { airIRRCUnitStatus 16 }
airIRRCUnitStatusInputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the input contact."
::= { airIRRCUnitStatus 17 }
airIRRCUnitStatusOutputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the output relay."
::= { airIRRCUnitStatus 18 }
airIRRCUnitStatusActivePowerSource OBJECT-TYPE
SYNTAX INTEGER {
sourceA (1),
sourceB (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power source that is powering the unit."
::= { airIRRCUnitStatus 19 }
airIRRCUnitStatusFluidValvePosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid valve position in percent open."
::= { airIRRCUnitStatus 20 }
airIRRCUnitStatusFluidFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid flow in tenths of gallons per minute."
::= { airIRRCUnitStatus 21 }
airIRRCUnitStatusFluidFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid flow in hundredths of liters per second."
::= { airIRRCUnitStatus 22 }
airIRRCUnitStatusEnteringFluidTemperatureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the entering fluid in
tenths of degrees Fahrenheit."
::= { airIRRCUnitStatus 23 }
airIRRCUnitStatusEnteringFluidTemperatureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the entering fluid in
tenths of degrees Celsius."
::= { airIRRCUnitStatus 24 }
airIRRCUnitStatusLeavingFluidTemperatureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the Leaving fluid in
tenths of degrees Fahrenheit."
::= { airIRRCUnitStatus 25 }
airIRRCUnitStatusLeavingFluidTemperatureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the Leaving fluid in
tenths of degrees Celsius."
::= { airIRRCUnitStatus 26 }
airIRRCUnitStatusLeakSensor OBJECT-TYPE
SYNTAX INTEGER {
no-leak (1),
leak (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (no-leak/leak) of the leak sensor."
::= { airIRRCUnitStatus 27 }
-- airIRRC AIR CONDITIONER UNIT Ident
airIRRCUnitIdentID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit identification number."
::= { airIRRCUnitIdent 1 }
airIRRCUnitIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit name."
::= { airIRRCUnitIdent 2 }
airIRRCUnitIdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit location."
::= { airIRRCUnitIdent 3 }
airIRRCUnitIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit model number."
::= { airIRRCUnitIdent 4 }
airIRRCUnitIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit serial number."
::= { airIRRCUnitIdent 5 }
airIRRCUnitIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit firmware version."
::= { airIRRCUnitIdent 6 }
airIRRCUnitIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit controller hardware revision."
::= { airIRRCUnitIdent 7 }
airIRRCUnitIdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit manufacture date."
::= { airIRRCUnitIdent 8 }
-- airIRRC AIR CONDITIONER UNIT Runhours
airIRRCUnitRunHoursAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit air filter run hours."
::= { airIRRCUnitRunHours 1 }
airIRRCUnitRunHoursFan1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 1 run hours."
::= { airIRRCUnitRunHours 2 }
airIRRCUnitRunHoursFan2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 2 run hours."
::= { airIRRCUnitRunHours 3 }
airIRRCUnitRunHoursFan3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 3 run hours."
::= { airIRRCUnitRunHours 4 }
airIRRCUnitRunHoursFan4 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 4 run hours."
::= { airIRRCUnitRunHours 5 }
airIRRCUnitRunHoursFan5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 5 run hours."
::= { airIRRCUnitRunHours 6 }
airIRRCUnitRunHoursFan6 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 6 run hours."
::= { airIRRCUnitRunHours 7 }
airIRRCUnitRunHoursFan7 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 7 run hours."
::= { airIRRCUnitRunHours 8}
airIRRCUnitRunHoursFan8 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 8 run hours."
::= { airIRRCUnitRunHours 9 }
airIRRCUnitRunHoursFanPowerSupplyLeft OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan left power supply run hours."
::= { airIRRCUnitRunHours 10 }
airIRRCUnitRunHoursFanPowerSupplyRight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan right power supply run hours."
::= { airIRRCUnitRunHours 11 }
airIRRCUnitRunHoursCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensate pump run hours."
::= { airIRRCUnitRunHours 12 }
airIRRCUnitRunHoursFanPowerSupplyFeedALeft OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan, DC power feed A, left power supply run hours.
This is only valid for a DC input unit."
::= { airIRRCUnitRunHours 13 }
airIRRCUnitRunHoursFanPowerSupplyFeedARight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan, DC power feed A, right power supply run hours.
This is only valid for a DC input unit."
::= { airIRRCUnitRunHours 14 }
airIRRCUnitRunHoursFanPowerSupplyFeedBLeft OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan, DC power feed B, left power supply run hours.
This is only valid for a DC input unit."
::= { airIRRCUnitRunHours 15 }
airIRRCUnitRunHoursFanPowerSupplyFeedBRight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan, DC power feed B, right power supply run hours.
This is only valid for a DC input unit."
::= { airIRRCUnitRunHours 16 }
-- airIRRC AIR CONDITIONER UNIT Service Intervals
airIRRCUnitServiceIntervalsAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Air filter service interval in weeks."
::= { airIRRCUnitServiceIntervals 1 }
airIRRCUnitServiceIntervalsAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The air filter service interval alarm enable/disable."
::= { airIRRCUnitServiceIntervals 2 }
-- airIRRC AIR CONDITIONER UNIT Thresholds
airIRRCUnitThresholdsRackInletHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRCUnitThresholds 1 }
airIRRCUnitThresholdsRackInletHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRCUnitThresholds 2 }
airIRRCUnitThresholdsSupplyAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRCUnitThresholds 3 }
airIRRCUnitThresholdsSupplyAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRCUnitThresholds 4 }
airIRRCUnitThresholdsReturnAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRCUnitThresholds 5 }
airIRRCUnitThresholdsReturnAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRCUnitThresholds 6 }
airIRRCUnitThresholdsEnteringFluidHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit entering fluid high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRCUnitThresholds 7 }
airIRRCUnitThresholdsEnteringFluidHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit incoming fluid high temperature threshold in
tenths of degrees Celsius."
::= { airIRRCUnitThresholds 8 }
-- airIRRC AIR CONDITIONER UNIT Config
airIRRCUnitConfigCoolCapacity OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
maximum (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The cooling capacity options setting."
::= { airIRRCUnitConfig 1 }
airIRRCUnitConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The startup delay in seconds."
::= { airIRRCUnitConfig 2 }
airIRRCUnitConfigIdleOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The idle on leak options setting."
::= { airIRRCUnitConfig 3 }
airIRRCUnitConfigPowerSource OBJECT-TYPE
SYNTAX INTEGER {
sourceA (1),
sourceB (2),
sourceAandB (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured power source of the unit."
::= { airIRRCUnitConfig 4 }
airIRRCUnitConfigInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the input contact."
::= { airIRRCUnitConfig 5 }
airIRRCUnitConfigOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the output relay."
::= { airIRRCUnitConfig 6 }
airIRRCUnitConfigOutputSource OBJECT-TYPE
SYNTAX INTEGER {
anyAlarm (1),
criticalAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of output relay change."
::= { airIRRCUnitConfig 7 }
airIRRCUnitConfigIdleOnCoolFail OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The idle on cool fail options setting.
If yes, the system will go into idle mode
when a cooling failure is detected.
If no, the system will not go into idle mode
when a cooling failure is detected. "
::= { airIRRCUnitConfig 8 }
-- airIRRP100 AIR CONDITIONER Group Status
airIRRP100GroupStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group air flow in cubic feet per minute."
::= { airIRRP100GroupStatus 1 }
airIRRP100GroupStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group air flow in liters per second."
::= { airIRRP100GroupStatus 2 }
airIRRP100GroupStatusMaxRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group maximum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRP100GroupStatus 3 }
airIRRP100GroupStatusMaxRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group maximum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRP100GroupStatus 4 }
airIRRP100GroupStatusMinRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group minimum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRP100GroupStatus 5 }
airIRRP100GroupStatusMinRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group minimum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRP100GroupStatus 6 }
airIRRP100GroupStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group coolant demand in tenths of kiloWatts."
::= { airIRRP100GroupStatus 7 }
airIRRP100GroupStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group coolant output in tenths of kiloWatts."
::= { airIRRP100GroupStatus 8 }
airIRRP100GroupStatusHumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of humidification the group is demanding
from the humidifiers in percent."
::= { airIRRP100GroupStatus 9 }
airIRRP100GroupStatusHumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual amount of humidification the group is
supplying in percent."
::= { airIRRP100GroupStatus 10 }
airIRRP100GroupStatusDehumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of dehumidification the group is demanding
from the electric heaters in percent."
::= { airIRRP100GroupStatus 11 }
airIRRP100GroupStatusDehumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual amount of dehumidification the group is
supplying in percent."
::= { airIRRP100GroupStatus 12 }
airIRRP100GroupStatusReheatDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of heating the group is demanding
from the electric heaters in percent."
::= { airIRRP100GroupStatus 13 }
airIRRP100GroupStatusReheatOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual amount of heating the group is
supplying in percent."
::= { airIRRP100GroupStatus 14 }
airIRRP100GroupStatusActiveFlowControlStatus OBJECT-TYPE
SYNTAX INTEGER {
under (1),
okay (2),
over (3),
notApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the active flow control
system."
::= { airIRRP100GroupStatus 15 }
airIRRP100GroupStatusDewPointTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group average dew point temperature in tenths of
degrees Fahrenheit."
::= { airIRRP100GroupStatus 16 }
airIRRP100GroupStatusDewPointTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group average dew point temperature in tenths of
degrees Celsius."
::= { airIRRP100GroupStatus 17 }
-- airIRRP100 AIR CONDITIONER Group Setpoints
airIRRP100GroupSetpointsCoolUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRRP100GroupSetpoints 1 }
airIRRP100GroupSetpointsCoolMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Celsius."
::= { airIRRP100GroupSetpoints 2 }
airIRRP100GroupSetpointsSupplyAirUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRRP100GroupSetpoints 3 }
airIRRP100GroupSetpointsSupplyAirMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRRP100GroupSetpoints 4 }
airIRRP100GroupSetpointsHumidify OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group humidify setpoint in tenths of
percent relative humidity."
::= { airIRRP100GroupSetpoints 5 }
airIRRP100GroupSetpointsDehumidify OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group dehumidify setpoint in tenths of
percent relative humidity."
::= { airIRRP100GroupSetpoints 6 }
airIRRP100GroupSetpointsDehumidifyDeadband OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group dehumidify deadband in percent relative humidity."
::= { airIRRP100GroupSetpoints 7 }
airIRRP100GroupSetpointsReheatUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRRP100GroupSetpoints 8 }
airIRRP100GroupSetpointsReheatMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRRP100GroupSetpoints 9 }
airIRRP100GroupSetpointsFanSpeedPreference OBJECT-TYPE
SYNTAX INTEGER {
low (1),
med-low (2),
med (3),
med-high (4),
high (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preferred fan speed setting."
::= { airIRRP100GroupSetpoints 10 }
airIRRP100GroupSetpointsFanSpeedControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The fan speed control setting."
::= { airIRRP100GroupSetpoints 11 }
airIRRP100GroupSetpointsActiveFlowControlBias OBJECT-TYPE
SYNTAX INTEGER {
positive (1),
slightlyPositive (2),
zero (3),
slightlyNegative (4),
negative (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The active flow control bias setting."
::= { airIRRP100GroupSetpoints 12 }
-- airIRRP100 AIR CONDITIONER Group Config
airIRRP100GroupConfigNumberofCoolingUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cooling units present in the group."
::= { airIRRP100GroupConfig 1 }
airIRRP100GroupConfigConfigurationType OBJECT-TYPE
SYNTAX INTEGER {
racs (1),
hacs (2),
in-row (3),
cacs (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group configuration type."
::= { airIRRP100GroupConfig 2 }
airIRRP100GroupConfigCoolGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the cool PID in hundredths."
::= { airIRRP100GroupConfig 3 }
airIRRP100GroupConfigCoolResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the cool PID in hundredths."
::= { airIRRP100GroupConfig 4 }
airIRRP100GroupConfigCoolDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the cool PID in hundredths."
::= { airIRRP100GroupConfig 5 }
airIRRP100GroupConfigHumidifySensitivityBand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The percent relative humidity below the setpoint that
will cause the humidifier to run at 100% capacity."
::= { airIRRP100GroupConfig 6 }
airIRRP100GroupConfigReheatGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the reheat PID in hundredths."
::= { airIRRP100GroupConfig 7 }
airIRRP100GroupConfigReheatResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the reheat PID in hundredths."
::= { airIRRP100GroupConfig 8 }
airIRRP100GroupConfigReheatDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the reheat PID in hundredths."
::= { airIRRP100GroupConfig 9 }
airIRRP100GroupConfigNumberofBackupUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of backup units."
::= { airIRRP100GroupConfig 10 }
airIRRP100GroupConfigRuntimeBalancingEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable runtime balancing feature."
::= { airIRRP100GroupConfig 11 }
airIRRP100GroupConfigLoadAssistEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable load assist feature."
::= { airIRRP100GroupConfig 12 }
airIRRP100GroupConfigFullRPBackups OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of full featured RPs that can be used as backup units."
::= { airIRRP100GroupConfig 13 }
airIRRP100GroupConfigMaxFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum desired fan speed setting in percent."
::= { airIRRP100GroupConfig 14 }
airIRRP100GroupConfigNumberOfActiveFlowControllers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of active flow controllers
present in the group."
::= { airIRRP100GroupConfig 15 }
airIRRP100GroupConfigActiveFlowControllerLampTest OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turns off/on the active flow
controller lamp test."
::= { airIRRP100GroupConfig 16 }
airIRRP100GroupConfigAltitudeUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in feet."
::= { airIRRP100GroupConfig 17 }
airIRRP100GroupConfigAltitudeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in meters."
::= { airIRRP100GroupConfig 18 }
-- airIRRP100 AIR CONDITIONER UNIT Status
airIRRP100UnitStatusOperateMode OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
on (2),
idle (3),
prestart (4),
service (5),
backup (6),
assist (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling unit operating mode."
::= { airIRRP100UnitStatus 1 }
airIRRP100UnitStatusRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRP100UnitStatus 2 }
airIRRP100UnitStatusRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRP100UnitStatus 3 }
airIRRP100UnitStatusSupplyAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Fahrenheit."
::= { airIRRP100UnitStatus 4 }
airIRRP100UnitStatusSupplyAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Celsius."
::= { airIRRP100UnitStatus 5 }
airIRRP100UnitStatusReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Fahrenheit."
::= { airIRRP100UnitStatus 6 }
airIRRP100UnitStatusReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Celsius."
::= { airIRRP100UnitStatus 7 }
airIRRP100UnitStatusSupplyHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The relative humidity of the supply air in
tenths of percent."
::= { airIRRP100UnitStatus 8 }
airIRRP100UnitStatusReturnHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The relative humidity of the return air in
tenths of percent."
::= { airIRRP100UnitStatus 9 }
airIRRP100UnitStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in cubic feet per minute."
::= { airIRRP100UnitStatus 10 }
airIRRP100UnitStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in hundredths of
liters per second."
::= { airIRRP100UnitStatus 11 }
airIRRP100UnitStatusFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit average fan speed in tenths of percent."
::= { airIRRP100UnitStatus 12 }
airIRRP100UnitStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling demand in tenths of kiloWatts."
::= { airIRRP100UnitStatus 13 }
airIRRP100UnitStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling output in tenths of kiloWatts."
::= { airIRRP100UnitStatus 14 }
airIRRP100UnitStatusHumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of humidification the unit is demanding
from the humidifier in percent."
::= { airIRRP100UnitStatus 15 }
airIRRP100UnitStatusHumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual humidification output of the unit
in percent."
::= { airIRRP100UnitStatus 16 }
airIRRP100UnitStatusDehumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of dehumidification the unit is
demanding in percent."
::= { airIRRP100UnitStatus 17 }
airIRRP100UnitStatusDehumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual dehumidification output of the unit
in percent."
::= { airIRRP100UnitStatus 18 }
airIRRP100UnitStatusReheatDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of heating the unit is demanding
from the electric heater in percent."
::= { airIRRP100UnitStatus 19 }
airIRRP100UnitStatusReheatOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual heating output of the unit
in percent."
::= { airIRRP100UnitStatus 20 }
airIRRP100UnitStatusInputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the input contact."
::= { airIRRP100UnitStatus 21 }
airIRRP100UnitStatusOutputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the output relay."
::= { airIRRP100UnitStatus 22 }
airIRRP100UnitStatusRackInletTemperature1US OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit."
::= { airIRRP100UnitStatus 23 }
airIRRP100UnitStatusRackInletTemperature1Metric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Celsius."
::= { airIRRP100UnitStatus 24 }
airIRRP100UnitStatusRackInletTemperature2US OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit."
::= { airIRRP100UnitStatus 25 }
airIRRP100UnitStatusRackInletTemperature2Metric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Celsius."
::= { airIRRP100UnitStatus 26 }
airIRRP100UnitStatusRackInletTemperature3US OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit."
::= { airIRRP100UnitStatus 27 }
airIRRP100UnitStatusRackInletTemperature3Metric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Celsius."
::= { airIRRP100UnitStatus 28 }
airIRRP100UnitStatusFilterDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in
hundredths of inches of water."
::= { airIRRP100UnitStatus 29 }
airIRRP100UnitStatusFilterDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in Pa."
::= { airIRRP100UnitStatus 30 }
airIRRP100UnitStatusContainmtDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in
hundredths of inches of water."
::= { airIRRP100UnitStatus 31 }
airIRRP100UnitStatusContainmtDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in Pa."
::= { airIRRP100UnitStatus 32 }
airIRRP100UnitStatusHumidifierCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The humidifier current of the unit
in tenths of amperes."
::= { airIRRP100UnitStatus 33 }
airIRRP100UnitStatusHumidifierWaterConductivity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The water conductivity in the humidifier of the unit
in microSiemens/cm."
::= { airIRRP100UnitStatus 34 }
airIRRP100UnitStatusCompressorDriveSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compressor drive speed in hundredths of Hertz."
::= { airIRRP100UnitStatus 35 }
airIRRP100UnitStatusCompressorDrivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compressor drive power consumption in
tenths of kiloWatts."
::= { airIRRP100UnitStatus 36 }
airIRRP100UnitStatusCompressorDriveVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compressor drive voltage consumption in
tenths of volts."
::= { airIRRP100UnitStatus 37 }
airIRRP100UnitStatusCompressorDriveCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compressor drive voltage consumption in
tenths of amperes."
::= { airIRRP100UnitStatus 38 }
airIRRP100UnitStatusCompressorDriveDCLinkVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compressor drive DC link voltage in
tenths of volts."
::= { airIRRP100UnitStatus 39 }
airIRRP100UnitStatusCompressorDriveHeatSinkTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the compressor drive heatsink
in tenths of degrees Fahrenheit."
::= { airIRRP100UnitStatus 40 }
airIRRP100UnitStatusCompressorDriveHeatSinkTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the compressor drive heatsink
in tenths of degrees Celsius."
::= { airIRRP100UnitStatus 41 }
airIRRP100UnitStatusCompressorDriveControlCardTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the compressor drive control card
in tenths of degrees Fahrenheit."
::= { airIRRP100UnitStatus 42 }
airIRRP100UnitStatusCompressorDriveControlCardTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the compressor drive control card
in tenths of degrees Celsius."
::= { airIRRP100UnitStatus 43 }
airIRRP100UnitStatusCompressorDriveWarningStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The four byte warning status of the compressor drive
in hexadecimal."
::= { airIRRP100UnitStatus 44 }
airIRRP100UnitStatusCompressorDriveAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The four byte alarm status of the compressor drive
in hexadecimal."
::= { airIRRP100UnitStatus 45 }
airIRRP100UnitStatusSuctionPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit suction pressure in pounds per square inch (PSI)."
::= { airIRRP100UnitStatus 46 }
airIRRP100UnitStatusSuctionPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit suction pressure in kiloPascals (kPa)."
::= { airIRRP100UnitStatus 47 }
airIRRP100UnitStatusDischargePressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit discharge pressure in pounds per square inch (PSI)."
::= { airIRRP100UnitStatus 48 }
airIRRP100UnitStatusDischargePressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit discharge pressure in kiloPascals (kPa)."
::= { airIRRP100UnitStatus 49 }
airIRRP100UnitStatusLeakSensor OBJECT-TYPE
SYNTAX INTEGER {
no-leak (1),
leak (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (no-leak/leak) of the leak sensor."
::= { airIRRP100UnitStatus 50 }
-- airIRRP100 AIR CONDITIONER UNIT Ident
airIRRP100UnitIdentID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit identification number."
::= { airIRRP100UnitIdent 1 }
airIRRP100UnitIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit name."
::= { airIRRP100UnitIdent 2 }
airIRRP100UnitIdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit location."
::= { airIRRP100UnitIdent 3 }
airIRRP100UnitIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit model number."
::= { airIRRP100UnitIdent 4 }
airIRRP100UnitIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit serial number."
::= { airIRRP100UnitIdent 5 }
airIRRP100UnitIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit firmware version."
::= { airIRRP100UnitIdent 6 }
airIRRP100UnitIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit controller hardware revision."
::= { airIRRP100UnitIdent 7 }
airIRRP100UnitIdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit manufacture date."
::= { airIRRP100UnitIdent 8 }
-- airIRRP100 AIR CONDITIONER UNIT Runhours
airIRRP100UnitRunHoursAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit air filter run hours."
::= { airIRRP100UnitRunHours 1 }
airIRRP100UnitRunHoursCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensate pump run hours."
::= { airIRRP100UnitRunHours 2 }
airIRRP100UnitRunHoursHumidifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan right power supply run hours."
::= { airIRRP100UnitRunHours 3 }
airIRRP100UnitRunHoursFan1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 1 run hours."
::= { airIRRP100UnitRunHours 4 }
airIRRP100UnitRunHoursHeater1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit heater 1 run hours."
::= { airIRRP100UnitRunHours 5 }
airIRRP100UnitRunHoursFan2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 2 run hours."
::= { airIRRP100UnitRunHours 6 }
airIRRP100UnitRunHoursHeater2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit Heater 2 run hours."
::= { airIRRP100UnitRunHours 7 }
airIRRP100UnitRunHoursCompressor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit compressor run hours."
::= { airIRRP100UnitRunHours 8 }
airIRRP100UnitRunHoursSystem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total system run hours."
::= { airIRRP100UnitRunHours 9 }
-- airIRRP100 AIR CONDITIONER UNIT Service Intervals
airIRRP100UnitServiceIntervalAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Air filter service interval in weeks."
::= { airIRRP100UnitServiceIntervals 1 }
airIRRP100UnitServiceIntervalAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The air filter service interval alarm enable/disable."
::= { airIRRP100UnitServiceIntervals 2 }
airIRRP100UnitServiceIntervalHumidifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier service interval in weeks."
::= { airIRRP100UnitServiceIntervals 3 }
airIRRP100UnitServiceIntervalHumidifierAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidifier service interval alarm enable/disable."
::= { airIRRP100UnitServiceIntervals 4 }
airIRRP100UnitServiceIntervalHeater OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Heater service interval in weeks."
::= { airIRRP100UnitServiceIntervals 5 }
airIRRP100UnitServiceIntervalHeaterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The heater service interval alarm enable/disable."
::= { airIRRP100UnitServiceIntervals 6 }
airIRRP100UnitServiceIntervalCompressor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor service interval in weeks."
::= { airIRRP100UnitServiceIntervals 7 }
airIRRP100UnitServiceIntervalCompressorAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The compressor service interval alarm enable/disable."
::= { airIRRP100UnitServiceIntervals 8 }
airIRRP100UnitServiceIntervalCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Condensate pump service interval in weeks."
::= { airIRRP100UnitServiceIntervals 9 }
airIRRP100UnitServiceIntervalCondensatePumpAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The condensate pump service interval alarm enable/disable."
::= { airIRRP100UnitServiceIntervals 10 }
airIRRP100UnitServiceIntervalFans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Fans service interval in weeks."
::= { airIRRP100UnitServiceIntervals 11 }
airIRRP100UnitServiceIntervalFansAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The fans service interval alarm enable/disable."
::= { airIRRP100UnitServiceIntervals 12 }
-- airIRRP100 AIR CONDITIONER UNIT Thresholds
airIRRP100UnitThresholdsRackInletHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRP100UnitThresholds 1 }
airIRRP100UnitThresholdsRackInletHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRP100UnitThresholds 2 }
airIRRP100UnitThresholdsSupplyAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRP100UnitThresholds 3 }
airIRRP100UnitThresholdsSupplyAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRP100UnitThresholds 4 }
airIRRP100UnitThresholdsReturnAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRP100UnitThresholds 5 }
airIRRP100UnitThresholdsReturnAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRP100UnitThresholds 6 }
airIRRP100UnitThresholdsSupplyHumidityHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply humidity high threshold in
tenths of percent relative humidity."
::= { airIRRP100UnitThresholds 7 }
airIRRP100UnitThresholdsSupplyHumidityLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply humidity low threshold in
tenths of percent relative humidity."
::= { airIRRP100UnitThresholds 8 }
-- airIRRP100 AIR CONDITIONER UNIT Config
airIRRP100UnitConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The startup delay in seconds."
::= { airIRRP100UnitConfig 1 }
airIRRP100UnitConfigCoolCapacity OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
maximum (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The cooling capacity options setting."
::= { airIRRP100UnitConfig 2 }
airIRRP100UnitConfigIdleOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The idle on leak options setting."
::= { airIRRP100UnitConfig 3 }
airIRRP100UnitConfigInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the input contact."
::= { airIRRP100UnitConfig 4 }
airIRRP100UnitConfigOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the output relay."
::= { airIRRP100UnitConfig 5 }
airIRRP100UnitConfigOutputSource OBJECT-TYPE
SYNTAX INTEGER {
anyAlarm (1),
criticalAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of output relay change."
::= { airIRRP100UnitConfig 6 }
airIRRP100UnitConfigHumidifyEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable humidification."
::= { airIRRP100UnitConfig 7 }
airIRRP100UnitConfigHumidifierControl OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
drainOff (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidifier drain control."
::= { airIRRP100UnitConfig 8 }
airIRRP100UnitConfigDehumidifyEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable dehumidification."
::= { airIRRP100UnitConfig 9 }
airIRRP100UnitConfigReheatEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable reheat."
::= { airIRRP100UnitConfig 10 }
airIRRP100UnitConfigHeatAssistEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable heat assist."
::= { airIRRP100UnitConfig 11 }
airIRRP100UnitConfigPowerSourceConfig OBJECT-TYPE
SYNTAX INTEGER {
single (1),
dual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the input power source: (1) single feed or (2) dual feed."
::= { airIRRP100UnitConfig 12 }
airIRRP100UnitConfigUnitRoleOverride OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
forcedOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this OID value is (1) automatic, the system determines
which units are used as primary units and which units are used as backups.
When this OID value is (2) forcedOn, the connected unit is set as a primary
unit."
::= { airIRRP100UnitConfig 13 }
airIRRP100UnitConfigSecondaryPowerFeedCapability OBJECT-TYPE
SYNTAX INTEGER {
full (1),
reduced (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Available on chilled water units. When the power source config setting
is set to dual, setting this value to reduced (2) will inhibit the heater
and humdifier when the unit is being powered from the secondary
input."
::= { airIRRP100UnitConfig 14 }
airIRRP100UnitConfigIdleOnCoolFail OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this OID value is (1) enable, the unit idles if it detects that it is blowing warm
air into the cold aisle. The unit will attempt to restart at 5 minute intervals."
::= { airIRRP100UnitConfig 15 }
-- airIRRP500 AIR CONDITIONER Group Status
airIRRP500GroupStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group air flow in cubic feet per minute."
::= { airIRRP500GroupStatus 1 }
airIRRP500GroupStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group air flow in liters per second."
::= { airIRRP500GroupStatus 2 }
airIRRP500GroupStatusMaxRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group maximum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRP500GroupStatus 3 }
airIRRP500GroupStatusMaxRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group maximum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRP500GroupStatus 4 }
airIRRP500GroupStatusMinRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group minimum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRP500GroupStatus 5 }
airIRRP500GroupStatusMinRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group minimum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRP500GroupStatus 6 }
airIRRP500GroupStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group coolant demand in tenths of kiloWatts."
::= { airIRRP500GroupStatus 7 }
airIRRP500GroupStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group coolant output in tenths of kiloWatts."
::= { airIRRP500GroupStatus 8 }
airIRRP500GroupStatusHumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of humidification the group is demanding
from the humidifiers in percent."
::= { airIRRP500GroupStatus 9 }
airIRRP500GroupStatusHumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual amount of humidification the group is
supplying in percent."
::= { airIRRP500GroupStatus 10 }
airIRRP500GroupStatusDehumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of dehumidification the group is demanding
from the electric heaters in percent."
::= { airIRRP500GroupStatus 11 }
airIRRP500GroupStatusDehumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual amount of dehumidification the group is
supplying in percent."
::= { airIRRP500GroupStatus 12 }
airIRRP500GroupStatusReheatDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of heating the group is demanding
from the electric heaters in percent."
::= { airIRRP500GroupStatus 13 }
airIRRP500GroupStatusReheatOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual amount of heating the group is
supplying in percent."
::= { airIRRP500GroupStatus 14 }
airIRRP500GroupStatusActiveFlowControlStatus OBJECT-TYPE
SYNTAX INTEGER {
under (1),
okay (2),
over (3),
notApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the active flow control
system."
::= { airIRRP500GroupStatus 15 }
airIRRP500GroupStatusDewPointTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group average dew point temperature in tenths of
degrees Fahrenheit."
::= { airIRRP500GroupStatus 16 }
airIRRP500GroupStatusDewPointTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group average dew point temperature in tenths of
degrees Celsius."
::= { airIRRP500GroupStatus 17 }
-- airIRRP500 AIR CONDITIONER Group Setpoints
airIRRP500GroupSetpointsCoolUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRRP500GroupSetpoints 1 }
airIRRP500GroupSetpointsCoolMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Celsius."
::= { airIRRP500GroupSetpoints 2 }
airIRRP500GroupSetpointsSupplyAirUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRRP500GroupSetpoints 3 }
airIRRP500GroupSetpointsSupplyAirMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRRP500GroupSetpoints 4 }
airIRRP500GroupSetpointsHumidify OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group humidify setpoint in tenths of
percent relative humidity."
::= { airIRRP500GroupSetpoints 5 }
airIRRP500GroupSetpointsDehumidify OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group dehumidify setpoint in tenths of
percent relative humidity."
::= { airIRRP500GroupSetpoints 6 }
airIRRP500GroupSetpointsDehumidifyDeadband OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group dehumidify deadband in
percent relative humidity."
::= { airIRRP500GroupSetpoints 7 }
airIRRP500GroupSetpointsReheatUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRRP500GroupSetpoints 8 }
airIRRP500GroupSetpointsReheatMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRRP500GroupSetpoints 9 }
airIRRP500GroupSetpointsFanSpeedPreference OBJECT-TYPE
SYNTAX INTEGER {
low (1),
med-low (2),
med (3),
med-high (4),
high (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preferred fan speed setting."
::= { airIRRP500GroupSetpoints 10 }
airIRRP500GroupSetpointsFanSpeedControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The fan speed control setting."
::= { airIRRP500GroupSetpoints 11 }
airIRRP500GroupSetpointsActiveFlowControlBias OBJECT-TYPE
SYNTAX INTEGER {
positive (1),
slightlyPositive (2),
zero (3),
slightlyNegative (4),
negative (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The active flow control bias setting."
::= { airIRRP500GroupSetpoints 12 }
-- airIRRP500 AIR CONDITIONER Group Config
airIRRP500GroupConfigNumberofCoolingUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cooling units."
::= { airIRRP500GroupConfig 1 }
airIRRP500GroupConfigConfigurationType OBJECT-TYPE
SYNTAX INTEGER {
racs (1),
hacs (2),
in-row (3),
cacs (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group configuration type."
::= { airIRRP500GroupConfig 2 }
airIRRP500GroupConfigPercentGlycol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The glycol mixture in percent."
::= { airIRRP500GroupConfig 3 }
airIRRP500GroupConfigCoolGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the cool PID in hundredths."
::= { airIRRP500GroupConfig 4 }
airIRRP500GroupConfigCoolResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the cool PID in hundredths."
::= { airIRRP500GroupConfig 5 }
airIRRP500GroupConfigCoolDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the cool PID in hundredths."
::= { airIRRP500GroupConfig 6 }
airIRRP500GroupConfigHumidifySensitivityBand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The percent relative humidity below the setpoint that
will cause the humidifier to run at 100% capacity."
::= { airIRRP500GroupConfig 7 }
airIRRP500GroupConfigReheatGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the reheat PID in hundredths."
::= { airIRRP500GroupConfig 8 }
airIRRP500GroupConfigReheatResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the reheat PID in hundredths."
::= { airIRRP500GroupConfig 9 }
airIRRP500GroupConfigReheatDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the reheat PID in hundredths."
::= { airIRRP500GroupConfig 10 }
airIRRP500GroupConfigMaxFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum desired fan speed setting in percent."
::= { airIRRP500GroupConfig 11 }
airIRRP500GroupConfigNumberofBackupUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of backup units."
::= { airIRRP500GroupConfig 12 }
airIRRP500GroupConfigRuntimeBalancingEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable runtime balancing feature."
::= { airIRRP500GroupConfig 13 }
airIRRP500GroupConfigLoadAssistEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable load assist feature."
::= { airIRRP500GroupConfig 14 }
airIRRP500GroupConfigFullRPBackups OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of full featured RPs that can be used as backup units."
::= { airIRRP500GroupConfig 15 }
airIRRP500GroupConfigNumberOfActiveFlowControllers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of active flow controllers
present in the group."
::= { airIRRP500GroupConfig 16 }
airIRRP500GroupConfigActiveFlowControllerLampTest OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turns off/on the active flow
controller lamp test."
::= { airIRRP500GroupConfig 17 }
airIRRP500GroupConfigAltitudeUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in feet."
::= { airIRRP500GroupConfig 18 }
airIRRP500GroupConfigAltitudeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in meters."
::= { airIRRP500GroupConfig 19 }
-- airIRRP500 AIR CONDITIONER UNIT Status
airIRRP500UnitStatusOperateMode OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
on (2),
idle (3),
prestart (4),
backup (5),
assist (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling unit operating mode."
::= { airIRRP500UnitStatus 1 }
airIRRP500UnitStatusMaximumRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum unit rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRRP500UnitStatus 2 }
airIRRP500UnitStatusMaximumRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum unit rack inlet temperature in tenths of
degrees Celsius."
::= { airIRRP500UnitStatus 3 }
airIRRP500UnitStatusSupplyAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Fahrenheit."
::= { airIRRP500UnitStatus 4 }
airIRRP500UnitStatusSupplyAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Celsius."
::= { airIRRP500UnitStatus 5 }
airIRRP500UnitStatusReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Fahrenheit."
::= { airIRRP500UnitStatus 6 }
airIRRP500UnitStatusReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Celsius."
::= { airIRRP500UnitStatus 7 }
airIRRP500UnitStatusSupplyHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The relative humidity of the supply air in
tenths of percent."
::= { airIRRP500UnitStatus 8 }
airIRRP500UnitStatusReturnHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The relative humidity of the return air in
tenths of percent."
::= { airIRRP500UnitStatus 9 }
airIRRP500UnitStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in cubic feet per minute."
::= { airIRRP500UnitStatus 10 }
airIRRP500UnitStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in hundredths of
liters per second."
::= { airIRRP500UnitStatus 11 }
airIRRP500UnitStatusFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit average fan speed in tenths of percent."
::= { airIRRP500UnitStatus 12 }
airIRRP500UnitStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling demand in tenths of kiloWatts."
::= { airIRRP500UnitStatus 13 }
airIRRP500UnitStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling output in tenths of kiloWatts."
::= { airIRRP500UnitStatus 14 }
airIRRP500UnitStatusHumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of humidification the unit is demanding
from the humidifier in percent."
::= { airIRRP500UnitStatus 15 }
airIRRP500UnitStatusHumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual humidification output of the unit
in percent."
::= { airIRRP500UnitStatus 16 }
airIRRP500UnitStatusDehumidifyDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of dehumidification the unit is
demanding in percent."
::= { airIRRP500UnitStatus 17 }
airIRRP500UnitStatusDehumidifyOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual dehumidification output of the unit
in percent."
::= { airIRRP500UnitStatus 18 }
airIRRP500UnitStatusReheatDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of heating the unit is demanding
from the electric heater in percent."
::= { airIRRP500UnitStatus 19 }
airIRRP500UnitStatusReheatOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual heating output of the unit
in percent."
::= { airIRRP500UnitStatus 20 }
airIRRP500UnitStatusInputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the input contact."
::= { airIRRP500UnitStatus 21 }
airIRRP500UnitStatusOutputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the output relay."
::= { airIRRP500UnitStatus 22 }
airIRRP500UnitStatusRackInletTemperature1US OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit."
::= { airIRRP500UnitStatus 23 }
airIRRP500UnitStatusRackInletTemperature1Metric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Celsius."
::= { airIRRP500UnitStatus 24 }
airIRRP500UnitStatusRackInletTemperature2US OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit."
::= { airIRRP500UnitStatus 25 }
airIRRP500UnitStatusRackInletTemperature2Metric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Celsius."
::= { airIRRP500UnitStatus 26 }
airIRRP500UnitStatusRackInletTemperature3US OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit."
::= { airIRRP500UnitStatus 27 }
airIRRP500UnitStatusRackInletTemperature3Metric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature sensor in tenths of
degrees Celsius."
::= { airIRRP500UnitStatus 28 }
airIRRP500UnitStatusContainmtDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in
hundredths of inches of water."
::= { airIRRP500UnitStatus 29 }
airIRRP500UnitStatusContainmtDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in Pa."
::= { airIRRP500UnitStatus 30 }
airIRRP500UnitStatusFilterDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in
hundredths of inches of water."
::= { airIRRP500UnitStatus 31 }
airIRRP500UnitStatusFilterDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in Pa."
::= { airIRRP500UnitStatus 32 }
airIRRP500UnitStatusHumidifierCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The humidifier current of the unit
in tenths of amperes."
::= { airIRRP500UnitStatus 33 }
airIRRP500UnitStatusHumidifierWaterConductivity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The water conductivity in the humidifier of the unit
in microSiemens/cm."
::= { airIRRP500UnitStatus 34 }
airIRRP500UnitStatusActivePowerSource OBJECT-TYPE
SYNTAX INTEGER {
sourceA (1),
sourceB (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power source that is powering the unit."
::= { airIRRP500UnitStatus 35 }
airIRRP500UnitStatusFluidValvePosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid valve position in percent open."
::= { airIRRP500UnitStatus 36 }
airIRRP500UnitStatusFluidFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid flow in tenths of gallons per minute."
::= { airIRRP500UnitStatus 37 }
airIRRP500UnitStatusFluidFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fluid flow in hundredths of liters per second."
::= { airIRRP500UnitStatus 38 }
airIRRP500UnitStatusEnteringFluidTemperatureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the entering fluid in
tenths of degrees Fahrenheit."
::= { airIRRP500UnitStatus 39 }
airIRRP500UnitStatusEnteringFluidTemperatureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the entering fluid in
tenths of degrees Celsius."
::= { airIRRP500UnitStatus 40 }
airIRRP500UnitStatusLeavingFluidTemperatureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the Leaving fluid in
tenths of degrees Fahrenheit."
::= { airIRRP500UnitStatus 41 }
airIRRP500UnitStatusLeavingFluidTemperatureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the Leaving fluid in
tenths of degrees Celsius."
::= { airIRRP500UnitStatus 42 }
airIRRP500UnitStatusLeakSensor OBJECT-TYPE
SYNTAX INTEGER {
no-leak (1),
leak (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (no-leak/leak) of the leak sensor."
::= { airIRRP500UnitStatus 43 }
-- airIRRP500 AIR CONDITIONER UNIT Ident
airIRRP500UnitIdentID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit identification number."
::= { airIRRP500UnitIdent 1 }
airIRRP500UnitIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit name."
::= { airIRRP500UnitIdent 2 }
airIRRP500UnitIdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit location."
::= { airIRRP500UnitIdent 3 }
airIRRP500UnitIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit model number."
::= { airIRRP500UnitIdent 4 }
airIRRP500UnitIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit serial number."
::= { airIRRP500UnitIdent 5 }
airIRRP500UnitIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit firmware version."
::= { airIRRP500UnitIdent 6 }
airIRRP500UnitIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit controller hardware revision."
::= { airIRRP500UnitIdent 7 }
airIRRP500UnitIdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit manufacture date."
::= { airIRRP500UnitIdent 8 }
-- airIRRP500 AIR CONDITIONER UNIT Runhours
airIRRP500UnitRunHoursAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit air filter run hours in hours."
::= { airIRRP500UnitRunHours 1 }
airIRRP500UnitRunHoursCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensate pump run hours in hours."
::= { airIRRP500UnitRunHours 2 }
airIRRP500UnitRunHoursHumidifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan right power supply run hours in hours."
::= { airIRRP500UnitRunHours 3 }
airIRRP500UnitRunHoursFan1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 1 run hours in hours."
::= { airIRRP500UnitRunHours 4 }
airIRRP500UnitRunHoursHeater1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit heater 1 run hours in hours."
::= { airIRRP500UnitRunHours 5 }
airIRRP500UnitRunHoursFan2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 2 run hours in hours."
::= { airIRRP500UnitRunHours 6 }
airIRRP500UnitRunHoursHeater2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit Heater 2 run hours in hours."
::= { airIRRP500UnitRunHours 7 }
airIRRP500UnitRunHoursFan3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan 3 run hours in hours."
::= { airIRRP500UnitRunHours 8 }
airIRRP500UnitRunHoursHeater3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit heater 3 run hours in hours."
::= { airIRRP500UnitRunHours 9 }
airIRRP500UnitRunHoursSystem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total system run hours."
::= { airIRRP500UnitRunHours 10 }
-- airIRRP500 AIR CONDITIONER UNIT Service Intervals
airIRRP500UnitServiceIntervalAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Air filter service interval in weeks."
::= { airIRRP500UnitServiceIntervals 1 }
airIRRP500UnitServiceIntervalAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The air filter service interval alarm enable/disable."
::= { airIRRP500UnitServiceIntervals 2 }
airIRRP500UnitServiceIntervalHumidifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier service interval in weeks."
::= { airIRRP500UnitServiceIntervals 3 }
airIRRP500UnitServiceIntervalHumidifierAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidifier service interval alarm enable/disable."
::= { airIRRP500UnitServiceIntervals 4 }
airIRRP500UnitServiceIntervalHeater OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Heater service interval in weeks."
::= { airIRRP500UnitServiceIntervals 5 }
airIRRP500UnitServiceIntervalHeaterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The heater service interval alarm enable/disable."
::= { airIRRP500UnitServiceIntervals 6 }
airIRRP500UnitServiceIntervalCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Condensate pump service interval in weeks."
::= { airIRRP500UnitServiceIntervals 7 }
airIRRP500UnitServiceIntervalCondensatePumpAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The condensate pump service interval alarm enable/disable."
::= { airIRRP500UnitServiceIntervals 8 }
airIRRP500UnitServiceIntervalFans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Fans service interval in weeks."
::= { airIRRP500UnitServiceIntervals 9 }
airIRRP500UnitServiceIntervalFansAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The fans service interval alarm enable/disable."
::= { airIRRP500UnitServiceIntervals 10 }
-- airIRRP500 AIR CONDITIONER UNIT Thresholds
airIRRP500UnitThresholdsRackInletHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRP500UnitThresholds 1 }
airIRRP500UnitThresholdsRackInletHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRP500UnitThresholds 2 }
airIRRP500UnitThresholdsSupplyAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air temperature high threshold in
tenths of degrees Fahrenheit."
::= { airIRRP500UnitThresholds 3 }
airIRRP500UnitThresholdsSupplyAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature high threshold in
tenths of degrees Celsius."
::= { airIRRP500UnitThresholds 4 }
airIRRP500UnitThresholdsReturnAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRP500UnitThresholds 5 }
airIRRP500UnitThresholdsReturnAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Celsius."
::= { airIRRP500UnitThresholds 6 }
airIRRP500UnitThresholdsReturnHumidityHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return humidity high threshold in
tenths of percent relative humidity."
::= { airIRRP500UnitThresholds 7 }
airIRRP500UnitThresholdsReturnHumidityLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return humidity low threshold in
tenths of percent relative humidity."
::= { airIRRP500UnitThresholds 8 }
airIRRP500UnitThresholdsEnteringFluidHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Entering fluid high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRRP500UnitThresholds 9 }
airIRRP500UnitThresholdsEnteringFluidHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Entering fluid high temperature threshold in
tenths of degrees Celsius."
::= { airIRRP500UnitThresholds 10 }
-- airIRRP500 AIR CONDITIONER UNIT Config
airIRRP500UnitConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The startup delay in seconds."
::= { airIRRP500UnitConfig 1 }
airIRRP500UnitConfigCoolCapacity OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
maximum (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The cooling capacity options setting."
::= { airIRRP500UnitConfig 2 }
airIRRP500UnitConfigIdleOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The idle on leak options setting."
::= { airIRRP500UnitConfig 3 }
airIRRP500UnitConfigInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the input contact."
::= { airIRRP500UnitConfig 4 }
airIRRP500UnitConfigOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the output relay."
::= { airIRRP500UnitConfig 5 }
airIRRP500UnitConfigOutputSource OBJECT-TYPE
SYNTAX INTEGER {
anyAlarm (1),
criticalAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of output relay change."
::= { airIRRP500UnitConfig 6 }
airIRRP500UnitConfigHumidifyEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable humidification."
::= { airIRRP500UnitConfig 7 }
airIRRP500UnitConfigHumidifierControl OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
drainOff (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The humidifier drain control."
::= { airIRRP500UnitConfig 8 }
airIRRP500UnitConfigDehumidifyEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable dehumidification."
::= { airIRRP500UnitConfig 9 }
airIRRP500UnitConfigReheatEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable reheat."
::= { airIRRP500UnitConfig 10 }
airIRRP500UnitConfigHeatAssistEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable heat assist."
::= { airIRRP500UnitConfig 11 }
airIRRP500UnitConfigPowerSourceConfig OBJECT-TYPE
SYNTAX INTEGER {
single (1),
dual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the input power source: (1) single feed or (2) dual feed."
::= { airIRRP500UnitConfig 12 }
airIRRP500UnitConfigUnitRoleOverride OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
forcedOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this OID value is (1) automatic, the system determines
which units are used as primary units and which units are used as backups.
When this OID value is (2) forcedOn, the connected unit is set as a primary
unit."
::= { airIRRP500UnitConfig 13 }
airIRRP500UnitConfigSecondaryPowerFeedCapability OBJECT-TYPE
SYNTAX INTEGER {
full (1),
reduced (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Available on chilled water units. When the power source config setting
is set to dual, setting this value to reduced (2) will inhibit the heater
and humdifier when the unit is being powered from the secondary
input."
::= { airIRRP500UnitConfig 14 }
airIRRP500UnitConfigIdleOnCoolFail OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this OID value is (1) enable, the unit idles if it detects that it is blowing warm
air into the cold aisle. The unit will attempt to restart at 5 minute intervals."
::= { airIRRP500UnitConfig 15 }
-- airIRSC AIR CONDITIONER Defines
AirIRSCConfigType ::= INTEGER {
racs (1),
spot (2),
in-row (3)
}
AirIRSCCapacityControlType ::= INTEGER {
discrete (1),
proportional (2)
}
AirIRSCFanSpeedPreference ::= INTEGER {
low (1),
med-low (2),
med (3),
med-high (4),
high (5)
}
AirIRSCFanSpeedControl ::= INTEGER {
automatic (1),
manual (2)
}
-- airIRSC AIR CONDITIONER UNIT Status
airIRSCUnitStatusOperateMode OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
on (2),
idle (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling unit operating mode."
::= { airIRSCUnitStatus 1 }
airIRSCUnitStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling output in tenths of kW."
::= { airIRSCUnitStatus 2 }
airIRSCUnitStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling demand in tenths of kW."
::= { airIRSCUnitStatus 3 }
airIRSCUnitStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in cubic feet per minute."
::= { airIRSCUnitStatus 4 }
airIRSCUnitStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in liters per second."
::= { airIRSCUnitStatus 5 }
airIRSCUnitStatusRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 6 }
airIRSCUnitStatusRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 7 }
airIRSCUnitStatusSupplyAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 8 }
airIRSCUnitStatusSupplyAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 9 }
airIRSCUnitStatusReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 10 }
airIRSCUnitStatusReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 11 }
airIRSCUnitStatusSuctionTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit suction temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 12 }
airIRSCUnitStatusSuctionTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit suction temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 13 }
airIRSCUnitStatusSuperheatTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit superheat temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 14 }
airIRSCUnitStatusSuperheatTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit superheat temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 15 }
airIRSCUnitStatusContainmtDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in
hundredths of inches of water."
::= { airIRSCUnitStatus 16 }
airIRSCUnitStatusContainmtDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit containment differential pressure in Pa."
::= { airIRSCUnitStatus 17 }
airIRSCUnitStatusFilterDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in
hundredths of inches of water."
::= { airIRSCUnitStatus 18 }
airIRSCUnitStatusFilterDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in Pa."
::= { airIRSCUnitStatus 19 }
airIRSCUnitStatusSuctionPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit suction pressure in pounds per square inch (PSI)."
::= { airIRSCUnitStatus 20 }
airIRSCUnitStatusSuctionPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit suction pressure in kiloPascals (kPa)."
::= { airIRSCUnitStatus 21 }
airIRSCUnitStatusDischargePressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit discharge pressure in pounds per square inch (PSI)."
::= { airIRSCUnitStatus 22 }
airIRSCUnitStatusDischargePressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit discharge pressure in kiloPascals (kPa)."
::= { airIRSCUnitStatus 23 }
airIRSCUnitStatusEvaporatorFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit average evaporator fan speed in tenths of percent."
::= { airIRSCUnitStatus 24 }
airIRSCUnitStatusCondenserFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit average condenser fan speed in tenths of percent."
::= { airIRSCUnitStatus 25 }
airIRSCUnitStatusInputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the input contact."
::= { airIRSCUnitStatus 26 }
airIRSCUnitStatusOutputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the output relay."
::= { airIRSCUnitStatus 27 }
airIRSCUnitStatusCondOutletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit condenser outlet air temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 28 }
airIRSCUnitStatusCondOutletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit condenser outlet air temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 29 }
airIRSCUnitStatusCondInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit condenser inlet air temperature in tenths of
degrees Fahrenheit."
::= { airIRSCUnitStatus 30 }
airIRSCUnitStatusCondInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit condenser inlet air temperature in tenths of
degrees Celsius."
::= { airIRSCUnitStatus 31 }
airIRSCUnitStatusCompressor OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (off/on) of the compressor."
::= { airIRSCUnitStatus 32 }
airIRSCUnitStatusLeakSensor OBJECT-TYPE
SYNTAX INTEGER {
no-leak (1),
leak (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (no-leak/leak) of the leak sensor."
::= { airIRSCUnitStatus 33 }
-- airIRSC AIR CONDITIONER UNIT Ident
airIRSCUnitIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit name."
::= { airIRSCUnitIdent 1 }
airIRSCUnitIdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit location."
::= { airIRSCUnitIdent 2 }
airIRSCUnitIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit model number."
::= { airIRSCUnitIdent 3 }
airIRSCUnitIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit serial number."
::= { airIRSCUnitIdent 4 }
airIRSCUnitIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit firmware version."
::= { airIRSCUnitIdent 5 }
airIRSCUnitIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit controller hardware revision."
::= { airIRSCUnitIdent 6 }
airIRSCUnitIdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the
unit manufacture date."
::= { airIRSCUnitIdent 7 }
-- airIRSC AIR CONDITIONER UNIT Runhours
airIRSCUnitRunHoursAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit air filter run hours."
::= { airIRSCUnitRunHours 1 }
airIRSCUnitRunHoursEvaporatorFan1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporator fan 1 run hours."
::= { airIRSCUnitRunHours 2 }
airIRSCUnitRunHoursEvaporatorFan2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporator fan 2 run hours."
::= { airIRSCUnitRunHours 3 }
airIRSCUnitRunHoursEvaporatorFan3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporator fan 3 run hours."
::= { airIRSCUnitRunHours 4 }
airIRSCUnitRunHoursCondenserFan1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condenser fan 1 run hours."
::= { airIRSCUnitRunHours 5 }
airIRSCUnitRunHoursCondenserFan2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condenser fan 2 run hours."
::= { airIRSCUnitRunHours 6 }
airIRSCUnitRunHoursCondenserFan3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condenser fan 3 run hours."
::= { airIRSCUnitRunHours 7 }
airIRSCUnitRunHoursFanPowerSupplyLeft OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan left power supply run hours."
::= { airIRSCUnitRunHours 8 }
airIRSCUnitRunHoursFanPowerSupplyRight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit fan right power supply run hours."
::= { airIRSCUnitRunHours 9 }
airIRSCUnitRunHoursCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensate pump run hours."
::= { airIRSCUnitRunHours 10 }
airIRSCUnitRunHoursCompressor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit compressor run hours."
::= { airIRSCUnitRunHours 11 }
-- airIRSC AIR CONDITIONER UNIT Service Intervals
airIRSCUnitServiceIntervalsAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Air filter service interval in weeks."
::= { airIRSCUnitServiceIntervals 1 }
airIRSCUnitServiceIntervalsAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The air filter service interval alarm enable/disable."
::= { airIRSCUnitServiceIntervals 2 }
-- airIRSC AIR CONDITIONER UNIT Thresholds
airIRSCUnitThresholdsRackInletHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRSCUnitThresholds 1 }
airIRSCUnitThresholdsRackInletHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Celsius."
::= { airIRSCUnitThresholds 2 }
airIRSCUnitThresholdsSupplyAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRSCUnitThresholds 3 }
airIRSCUnitThresholdsSupplyAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Celsius."
::= { airIRSCUnitThresholds 4 }
airIRSCUnitThresholdsReturnAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRSCUnitThresholds 5 }
airIRSCUnitThresholdsReturnAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Celsius."
::= { airIRSCUnitThresholds 6 }
-- airIRSC AIR CONDITIONER UNIT Setpoints
airIRSCUnitSetptsCoolSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRSCUnitSetpoints 1 }
airIRSCUnitSetptsCoolSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit cooling setpoint in tenths of
degrees Celsius."
::= { airIRSCUnitSetpoints 2 }
airIRSCUnitSetptsCoolDeadbandUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit cooling deadband in tenths of
degrees Fahrenheit."
::= { airIRSCUnitSetpoints 3 }
airIRSCUnitSetptsCoolDeadbandMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit cooling deadband in tenths of
degrees Celsius."
::= { airIRSCUnitSetpoints 4 }
airIRSCUnitSetptsFanSpeedPreference OBJECT-TYPE
SYNTAX AirIRSCFanSpeedPreference
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preferred fan speed setting."
::= { airIRSCUnitSetpoints 5 }
airIRSCUnitSetptsSupplyAirSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRSCUnitSetpoints 6 }
airIRSCUnitSetptsSupplyAirSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air setpoint in tenths of
degrees Celsius."
::= { airIRSCUnitSetpoints 7 }
-- airIRSC AIR CONDITIONER UNIT Config
airIRSCUnitConfigConfigurationType OBJECT-TYPE
SYNTAX AirIRSCConfigType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit configuration type."
::= { airIRSCUnitConfig 1 }
airIRSCUnitConfigCapacityControlType OBJECT-TYPE
SYNTAX AirIRSCCapacityControlType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit capacity control."
::= { airIRSCUnitConfig 2 }
airIRSCUnitConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The startup delay in seconds."
::= { airIRSCUnitConfig 3 }
airIRSCUnitConfigIdleOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The idle on leak options setting."
::= { airIRSCUnitConfig 4 }
airIRSCUnitConfigInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the input contact."
::= { airIRSCUnitConfig 5 }
airIRSCUnitConfigOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the output relay."
::= { airIRSCUnitConfig 6 }
airIRSCUnitConfigOutputSource OBJECT-TYPE
SYNTAX INTEGER {
anyAlarm (1),
criticalAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of output relay change."
::= { airIRSCUnitConfig 7 }
airIRSCUnitConfigAltitudeUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The altitude of the unit above sea level in feet."
::= { airIRSCUnitConfig 8 }
airIRSCUnitConfigAltitudeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The altitude of the unit above sea level in meters."
::= { airIRSCUnitConfig 9 }
airIRSCUnitConfigOpControl OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit operational control."
::= { airIRSCUnitConfig 10 }
-- airIRSC AIR CONDITIONER GROUP Status
airIRSCGroupStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group cooling output in tenths of kW."
::= { airIRSCGroupStatus 1 }
airIRSCGroupStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group cooling demand in tenths of kW."
::= { airIRSCGroupStatus 2 }
airIRSCGroupStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group air flow in cubic feet per minute."
::= { airIRSCGroupStatus 3 }
airIRSCGroupStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group air flow in liters per second."
::= { airIRSCGroupStatus 4 }
airIRSCGroupStatusMaxRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRSCGroupStatus 5 }
airIRSCGroupStatusMaxRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRSCGroupStatus 6 }
airIRSCGroupStatusMinRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRSCGroupStatus 7 }
airIRSCGroupStatusMinRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRSCGroupStatus 8 }
airIRSCGroupStatusMaxReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum return air temperature in tenths of
degrees Fahrenheit."
::= { airIRSCGroupStatus 9 }
airIRSCGroupStatusMaxReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum return air temperature in tenths of
degrees Celsius."
::= { airIRSCGroupStatus 10 }
airIRSCGroupStatusMinReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum return air temperature in tenths of
degrees Fahrenheit."
::= { airIRSCGroupStatus 11 }
airIRSCGroupStatusMinReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum return air temperature in tenths of
degrees Celsius."
::= { airIRSCGroupStatus 12 }
airIRSCGroupStatusActiveFlowControlStatus OBJECT-TYPE
SYNTAX INTEGER {
under (1),
okay (2),
over (3),
notApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the active flow control
system."
::= { airIRSCGroupStatus 13 }
-- airIRSC AIR CONDITIONER GROUP Setpoint
airIRSCGroupSetptsCoolSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRSCGroupSetpoints 1 }
airIRSCGroupSetptsCoolSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Celsius."
::= { airIRSCGroupSetpoints 2 }
airIRSCGroupSetptsCoolDeadbandUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling deadband in tenths of
degrees Fahrenheit."
::= { airIRSCGroupSetpoints 3 }
airIRSCGroupSetptsCoolDeadbandMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling deadband in tenths of
degrees Celsius."
::= { airIRSCGroupSetpoints 4 }
airIRSCGroupSetptsFanSpeedPreference OBJECT-TYPE
SYNTAX AirIRSCFanSpeedPreference
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group preferred fan speed setting."
::= { airIRSCGroupSetpoints 5 }
airIRSCGroupSetptsSupplyAirSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRSCGroupSetpoints 6 }
airIRSCGroupSetptsSupplyAirSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRSCGroupSetpoints 7 }
airIRSCGroupSetpointsActiveFlowControlBias OBJECT-TYPE
SYNTAX INTEGER {
positive (1),
slightlyPositive (2),
zero (3),
slightlyNegative (4),
negative (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The active flow control bias setting."
::= { airIRSCGroupSetpoints 8 }
-- airIRSC AIR CONDITIONER GROUP Config
airIRSCGroupConfigNumberofCoolingUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cooling units."
::= { airIRSCGroupConfig 1 }
airIRSCGroupConfigConfigurationType OBJECT-TYPE
SYNTAX AirIRSCConfigType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group configuration type."
::= { airIRSCGroupConfig 2 }
airIRSCGroupConfigCapacityControlType OBJECT-TYPE
SYNTAX AirIRSCCapacityControlType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group capacity control."
::= { airIRSCGroupConfig 3 }
airIRSCGroupConfigAltitudeUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in feet."
::= { airIRSCGroupConfig 4 }
airIRSCGroupConfigAltitudeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in meters."
::= { airIRSCGroupConfig 5 }
airIRSCGroupConfigFanSpeedControl OBJECT-TYPE
SYNTAX AirIRSCFanSpeedControl
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group fan speed control."
::= { airIRSCGroupConfig 6 }
airIRSCGroupConfigNumberOfActiveFlowControllers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of active flow controllers
present in the group."
::= { airIRSCGroupConfig 7 }
airIRSCGroupConfigActiveFlowControllerLampTest OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turns off/on the active flow
controller lamp test."
::= { airIRSCGroupConfig 8 }
-- ******************************************************************
-- airIRG2 Ident
-- ******************************************************************
airIRG2IdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the unit name."
::= { airIRG2Ident 1 }
airIRG2IdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the unit location."
::= { airIRG2Ident 2 }
airIRG2IdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit model number."
::= { airIRG2Ident 3 }
airIRG2IdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit serial number."
::= { airIRG2Ident 4 }
airIRG2IdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit firmware version."
::= { airIRG2Ident 5 }
airIRG2IdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit controller hardware revision."
::= { airIRG2Ident 6 }
airIRG2IdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit manufacture date."
::= { airIRG2Ident 7 }
airIRG2IdentUnitSysOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID contains an OID path to the device's top level unit data."
::= { airIRG2Ident 8 }
airIRG2IdentGroupSysOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID contains an OID path to the device's top level group data."
::= { airIRG2Ident 9 }
-- ******************************************************************
-- airIRG2 GROUP Status
-- ******************************************************************
airIRG2GroupStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group cooling output in tenths of kilowatts (kW)."
::= { airIRG2GroupStatus 1 }
airIRG2GroupStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group cooling demand in tenths of kilowatts (kW)."
::= { airIRG2GroupStatus 2 }
airIRG2GroupStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group air flow in cubic feet per minute."
::= { airIRG2GroupStatus 3 }
airIRG2GroupStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group air flow in hundredths of
liters per second."
::= { airIRG2GroupStatus 4 }
airIRG2GroupStatusMaxRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG2GroupStatus 5 }
airIRG2GroupStatusMaxRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRG2GroupStatus 6 }
airIRG2GroupStatusMinRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG2GroupStatus 7 }
airIRG2GroupStatusMinRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum rack inlet temperature in tenths of
degrees Celsius."
::= { airIRG2GroupStatus 8 }
airIRG2GroupStatusMaxReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum return air temperature in tenths of
degrees Fahrenheit."
::= { airIRG2GroupStatus 9 }
airIRG2GroupStatusMaxReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum return air temperature in tenths of
degrees Celsius."
::= { airIRG2GroupStatus 10 }
airIRG2GroupStatusMinReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum return air temperature in tenths of
degrees Fahrenheit."
::= { airIRG2GroupStatus 11 }
airIRG2GroupStatusMinReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum return air temperature in tenths of
degrees Celsius."
::= { airIRG2GroupStatus 12 }
airIRG2GroupStatusActiveFlowControlStatus OBJECT-TYPE
SYNTAX INTEGER {
under (1),
okay (2),
over (3),
notApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the active flow control
system."
::= { airIRG2GroupStatus 13 }
-- ******************************************************************
-- airIRG2 GROUP Setpoint
-- ******************************************************************
airIRG2GroupSetptsCoolSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRG2GroupSetpoints 1 }
airIRG2GroupSetptsCoolSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Celsius."
::= { airIRG2GroupSetpoints 2 }
airIRG2GroupSetptsCoolDeadbandUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling deadband in tenths of
degrees Fahrenheit."
::= { airIRG2GroupSetpoints 3 }
airIRG2GroupSetptsCoolDeadbandMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling deadband in tenths of
degrees Celsius."
::= { airIRG2GroupSetpoints 4 }
airIRG2GroupSetptsFanSpeedPreference OBJECT-TYPE
SYNTAX INTEGER {
low (1),
med-low (2),
med (3),
med-high (4),
high (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group preferred fan speed setting."
::= { airIRG2GroupSetpoints 5 }
airIRG2GroupSetptsSupplyAirSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRG2GroupSetpoints 6 }
airIRG2GroupSetptsSupplyAirSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRG2GroupSetpoints 7 }
airIRG2GroupSetpointsActiveFlowControlBias OBJECT-TYPE
SYNTAX INTEGER {
positive (1),
slightlyPositive (2),
zero (3),
slightlyNegative (4),
negative (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The active flow control bias setting."
::= { airIRG2GroupSetpoints 8 }
-- ******************************************************************
-- airIRG2 GROUP Config
-- ******************************************************************
airIRG2GroupConfigNumberofCoolingUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cooling units."
::= { airIRG2GroupConfig 1 }
airIRG2GroupConfigConfigurationType OBJECT-TYPE
SYNTAX INTEGER {
racs (1),
spot (2),
in-row (3),
hacs (4),
cacs (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group configuration type."
::= { airIRG2GroupConfig 2 }
airIRG2GroupConfigCapacityControlType OBJECT-TYPE
SYNTAX INTEGER {
discrete (1),
proportional (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group capacity control."
::= { airIRG2GroupConfig 3 }
airIRG2GroupConfigFanSpeedControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group fan speed control."
::= { airIRG2GroupConfig 4 }
airIRG2GroupConfigCoolGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the PID in hundredths."
::= { airIRG2GroupConfig 5 }
airIRG2GroupConfigCoolResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the PID in hundredths."
::= { airIRG2GroupConfig 6 }
airIRG2GroupConfigCoolDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the PID in hundredths."
::= { airIRG2GroupConfig 7 }
airIRG2GroupConfigCoolPIDReset OBJECT-TYPE
SYNTAX INTEGER {
readBack (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Will reset the PID coefficients back to the factory defaults."
::= { airIRG2GroupConfig 8 }
airIRG2GroupConfigNumberofBackupUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of backup units."
::= { airIRG2GroupConfig 9 }
airIRG2GroupConfigRuntimeBalancingEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable runtime balancing feature."
::= { airIRG2GroupConfig 10 }
airIRG2GroupConfigLoadAssistEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable load assist feature."
::= { airIRG2GroupConfig 11 }
airIRG2GroupConfigNumberOfActiveFlowControllers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of active flow controllers
present in the group."
::= { airIRG2GroupConfig 12 }
airIRG2GroupConfigActiveFlowControllerLampTest OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turns off/on the active flow
controller lamp test."
::= { airIRG2GroupConfig 13 }
airIRG2GroupConfigAltitudeUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in feet."
::= { airIRG2GroupConfig 14 }
airIRG2GroupConfigAltitudeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group altitude of the units above sea level in meters."
::= { airIRG2GroupConfig 15 }
-- ***************************************
-- airIRG2 Alarm Status
-- ***************************************
airIRG2AlarmsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active alarms in the airIRG2AlarmsTable."
::= { airIRG2Alarms 1 }
AirIRG2AlarmsEntry ::= SEQUENCE {
airIRG2AlarmsIndex INTEGER,
airIRG2AlarmsEventCode INTEGER,
airIRG2AlarmsDescription DisplayString
}
airIRG2AlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG2AlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of active alarms for the device."
::= { airIRG2Alarms 2 }
airIRG2AlarmsEntry OBJECT-TYPE
SYNTAX AirIRG2AlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Alarms specification"
INDEX { airIRG2AlarmsIndex }
::= { airIRG2AlarmsTable 1 }
airIRG2AlarmsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm index."
::= { airIRG2AlarmsEntry 1 }
airIRG2AlarmsEventCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Code for the alarm."
::= { airIRG2AlarmsEntry 2 }
airIRG2AlarmsDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of the alarm."
::= { airIRG2AlarmsEntry 3 }
-- ***************************************
-- airIRG2RDType2 AIR CONDITIONER Defines
-- ***************************************
AirIRG2RDType2IOState ::= INTEGER {
open (1),
closed (2)
}
-- ******************************************************************
-- airIRG2RDT2 Status
-- ******************************************************************
airIRG2RDT2StatusOperateMode OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
on (2),
idle (3),
reserved (4),
service (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling unit operating mode."
::= { airIRG2RDT2Status 1 }
airIRG2RDT2StatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling output in tenths of kilowatts (kW)."
::= { airIRG2RDT2Status 2 }
airIRG2RDT2StatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit cooling demand in tenths of kilowatts (kW)."
::= { airIRG2RDT2Status 3 }
airIRG2RDT2StatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in cubic feet per minute."
::= { airIRG2RDT2Status 4 }
airIRG2RDT2StatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air flow in liters per second."
::= { airIRG2RDT2Status 5 }
airIRG2RDT2StatusRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG2RDT2Status 6 }
airIRG2RDT2StatusRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit rack inlet temperature in tenths of
degrees Celsius."
::= { airIRG2RDT2Status 7 }
airIRG2RDT2StatusSupplyAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Fahrenheit."
::= { airIRG2RDT2Status 8 }
airIRG2RDT2StatusSupplyAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit supply air temperature in tenths of
degrees Celsius."
::= { airIRG2RDT2Status 9 }
airIRG2RDT2StatusReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Fahrenheit."
::= { airIRG2RDT2Status 10 }
airIRG2RDT2StatusReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit return air temperature in tenths of
degrees Celsius."
::= { airIRG2RDT2Status 11 }
airIRG2RDT2StatusSuctionTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit suction temperature in tenths of
degrees Fahrenheit."
::= { airIRG2RDT2Status 12 }
airIRG2RDT2StatusSuctionTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit suction temperature in tenths of
degrees Celsius."
::= { airIRG2RDT2Status 13 }
airIRG2RDT2StatusSuperheatTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit superheat temperature in tenths of
degrees Fahrenheit."
::= { airIRG2RDT2Status 14 }
airIRG2RDT2StatusSuperheatTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit superheat temperature in tenths of
degrees Celsius."
::= { airIRG2RDT2Status 15 }
airIRG2RDT2StatusFilterDPUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in
hundredths of inches of water."
::= { airIRG2RDT2Status 16 }
airIRG2RDT2StatusFilterDPMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit air filter differential pressure in pascals (Pa)."
::= { airIRG2RDT2Status 17 }
airIRG2RDT2StatusSuctionPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit suction pressure in pounds per square inch (PSI)."
::= { airIRG2RDT2Status 18 }
airIRG2RDT2StatusSuctionPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit suction pressure in kiloPascals (kPa)."
::= { airIRG2RDT2Status 19 }
airIRG2RDT2StatusDischargePressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit discharge pressure in pounds per square inch (PSI)."
::= { airIRG2RDT2Status 20 }
airIRG2RDT2StatusDischargePressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit discharge pressure in kiloPascals (kPa)."
::= { airIRG2RDT2Status 21 }
airIRG2RDT2StatusEvaporatorFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit average evaporator fan speed in tenths of percent."
::= { airIRG2RDT2Status 22 }
airIRG2RDT2StatusInputState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the input contact."
::= { airIRG2RDT2Status 23 }
airIRG2RDT2StatusOutputState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the output relay."
::= { airIRG2RDT2Status 24 }
airIRG2RDT2StatusOHEInputState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the outside heat exchanger(OHE) input contact."
::= { airIRG2RDT2Status 25 }
airIRG2RDT2StatusOHEOutputState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the outside heat exchanger(OHE) output relay."
::= { airIRG2RDT2Status 26 }
airIRG2RDT2StatusCompressor OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (off/on) of the compressor."
::= { airIRG2RDT2Status 27 }
airIRG2RDT2StatusFluidValvePos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the fluid valve in percent. This OID is only valid
when airIRG2RDT2ConfigUnitType indicates fluidCooled(1)."
::= { airIRG2RDT2Status 28 }
airIRG2RDT2StatusHotGasBypassValvePos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The position of the hot gas bypass valve in hundredths of percent."
::= { airIRG2RDT2Status 29 }
airIRG2RDT2StatusLeakSensor OBJECT-TYPE
SYNTAX INTEGER {
no-leak (1),
leak (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state (no-leak/leak) of the leak sensor."
::= { airIRG2RDT2Status 30 }
-- ******************************************************************
-- airIRG2RDT2 Runhours
-- ******************************************************************
airIRG2RDT2RunHoursAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit air filter run hours."
::= { airIRG2RDT2RunHours 1 }
airIRG2RDT2RunHoursCondensatePump OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensate pump run hours."
::= { airIRG2RDT2RunHours 2 }
airIRG2RDT2RunHoursCompressor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit compressor run hours."
::= { airIRG2RDT2RunHours 3 }
-- *******************************
-- Run Hour Fan Power supply table
-- *******************************
airIRG2RDT2RunHoursFanPSTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the run hour fan power supply table
(airIRG2RDT2RunHoursFanPSTable)."
::= { airIRG2RDT2RunHours 4 }
AirIRG2RDT2RunHoursFanPSEntry ::=
SEQUENCE {
airIRG2RDT2RunHoursFanPSIndex INTEGER,
airIRG2RDT2RunHoursFanPSPosition INTEGER,
airIRG2RDT2RunHoursFanPSHours INTEGER
}
airIRG2RDT2RunHoursFanPSTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG2RDT2RunHoursFanPSEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting run hour information from each power supply."
::= { airIRG2RDT2RunHours 5 }
airIRG2RDT2RunHoursFanPSEntry OBJECT-TYPE
SYNTAX AirIRG2RDT2RunHoursFanPSEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The run hours fan power supply table entry."
INDEX { airIRG2RDT2RunHoursFanPSIndex }
::= { airIRG2RDT2RunHoursFanPSTable 1 }
airIRG2RDT2RunHoursFanPSIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of run hours fan power supply table."
::= { airIRG2RDT2RunHoursFanPSEntry 1 }
airIRG2RDT2RunHoursFanPSHours OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan power supply run time in hours."
::= { airIRG2RDT2RunHoursFanPSEntry 2 }
airIRG2RDT2RunHoursFanPSPosition OBJECT-TYPE
SYNTAX INTEGER {
upper (1),
lower (2),
left (3),
right (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Position of fan power supply within the unit."
::= { airIRG2RDT2RunHoursFanPSEntry 3 }
-- *****************************
-- Run Hour Evaporator Fan table
-- *****************************
airIRG2RDT2RunHoursEvapFanTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the run hour evaporator fan table
(airIRG2RDT2RunHoursEvapFanTable)."
::= { airIRG2RDT2RunHours 6 }
AirIRG2RDT2RunHoursEvapFanEntry ::=
SEQUENCE {
airIRG2RDT2RunHoursEvapFanIndex INTEGER,
airIRG2RDT2RunHoursEvapFanHours INTEGER
}
airIRG2RDT2RunHoursEvapFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG2RDT2RunHoursEvapFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each evaporator fan run
hour in the system. "
::= { airIRG2RDT2RunHours 7 }
airIRG2RDT2RunHoursEvapFanEntry OBJECT-TYPE
SYNTAX AirIRG2RDT2RunHoursEvapFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information from each evaporator fan run
hour in the system. "
INDEX { airIRG2RDT2RunHoursEvapFanIndex }
::= { airIRG2RDT2RunHoursEvapFanTable 1 }
airIRG2RDT2RunHoursEvapFanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of run hours evaporator fan table."
::= { airIRG2RDT2RunHoursEvapFanEntry 1 }
airIRG2RDT2RunHoursEvapFanHours OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Evaporator fan run time in hours."
::= { airIRG2RDT2RunHoursEvapFanEntry 2 }
airIRG2RDT2RunHoursUnit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit run time in hours."
::= { airIRG2RDT2RunHours 8 }
-- ******************************************************************
-- airIRG2RDT2 Service Intervals
-- ******************************************************************
airIRG2RDT2ServiceIntervalsAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Air filter service interval in weeks."
::= { airIRG2RDT2ServiceIntervals 1 }
airIRG2RDT2ServiceIntervalsAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The air filter service interval alarm enable/disable."
::= { airIRG2RDT2ServiceIntervals 2 }
-- ******************************************************************
-- airIRG2RDT2 Thresholds
-- ******************************************************************
airIRG2RDT2ThresholdsRackInletHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRG2RDT2Thresholds 1 }
airIRG2RDT2ThresholdsRackInletHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit rack inlet air high temperature threshold in
tenths of degrees Celsius."
::= { airIRG2RDT2Thresholds 2 }
airIRG2RDT2ThresholdsSupplyAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRG2RDT2Thresholds 3 }
airIRG2RDT2ThresholdsSupplyAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit supply air high temperature threshold in
tenths of degrees Celsius."
::= { airIRG2RDT2Thresholds 4 }
airIRG2RDT2ThresholdsReturnAirHighTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Fahrenheit."
::= { airIRG2RDT2Thresholds 5 }
airIRG2RDT2ThresholdsReturnAirHighTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unit return air high temperature threshold in
tenths of degrees Celsius."
::= { airIRG2RDT2Thresholds 6 }
-- ******************************************************************
-- airIRG2RDT2 Setpoints
-- ******************************************************************
-- There are no setpoint OIDs. This is just a placeholder in case
-- we add some unit setpoints.
-- ******************************************************************
-- airIRG2RDT2 Config
-- ******************************************************************
airIRG2RDT2ConfigUnitType OBJECT-TYPE
SYNTAX INTEGER {
fluidCooled (1),
airCooled (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the unit."
::= { airIRG2RDT2Config 1 }
airIRG2RDT2ConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The startup delay in seconds."
::= { airIRG2RDT2Config 2 }
airIRG2RDT2ConfigIdleOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The idle on leak options setting."
::= { airIRG2RDT2Config 3 }
airIRG2RDT2ConfigInputNormalState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the input contact."
::= { airIRG2RDT2Config 4 }
airIRG2RDT2ConfigOutputNormalState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the output relay."
::= { airIRG2RDT2Config 5 }
airIRG2RDT2ConfigOutputSource OBJECT-TYPE
SYNTAX INTEGER {
anyAlarm (1),
criticalAlarm (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of output relay change."
::= { airIRG2RDT2Config 6 }
airIRG2RDT2ConfigOHEInputNormalState OBJECT-TYPE
SYNTAX AirIRG2RDType2IOState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the outside heat exchanger(OHE) input relay."
::= { airIRG2RDT2Config 7 }
airIRG2RDT2ConfigUnitRoleOverride OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
forcedOn (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this OID value is (1) automatic, the system determines
which units are used as primary units and which units are used as backups.
When this OID value is (2) forcedOn, the connected unit is set as a primary
unit."
::= { airIRG2RDT2Config 8 }
airIRG2RDT2ConfigUnitIdleOnCoolFail OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this OID value is (2) yes, the unit idles if it detects that it is blowing warm
air into the cold aisle. The unit will attempt to restart at 5 minute intervals."
::= { airIRG2RDT2Config 9 }
-- Beginning of AC InRoom
-- common InRoom values
AirIRmAlarmState ::= INTEGER { ok (1), alarm (2) }
AirIRmControlState ::= INTEGER { off (1), on (2) }
AirIRmStopState ::= INTEGER { maybeOn (1), unitOff (2) }
AirIRmActivityState ::= INTEGER { inactive (1), active (2) }
-- ***************************************
-- InRoom Ident
-- ***************************************
airIRmIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the unit name."
::= { airIRmIdent 1 }
airIRmIdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the unit location."
::= { airIRmIdent 2 }
airIRmIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit model number."
::= { airIRmIdent 3 }
airIRmIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit serial number."
::= { airIRmIdent 4 }
airIRmIdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit firmware version."
::= { airIRmIdent 5 }
airIRmIdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit controller hardware revision."
::= { airIRmIdent 6 }
airIRmIdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit manufacture date."
::= { airIRmIdent 7 }
airIRmIdentSysOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID contains an OID path to the device's top level data."
::= { airIRmIdent 8 }
-- ***************************************
-- InRoom Alarm Status
-- ***************************************
airIRmAlarmsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active alarms in the airIRG2AlarmsTable."
::= { airIRmAlarms 1 }
AirIRmAlarmsEntry ::= SEQUENCE {
airIRmAlarmsIndex INTEGER,
airIRmAlarmsEventCode INTEGER,
airIRmAlarmsDescription DisplayString
}
airIRmAlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRmAlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of active alarms for the device."
::= { airIRmAlarms 2 }
airIRmAlarmsEntry OBJECT-TYPE
SYNTAX AirIRmAlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Alarms specification"
INDEX { airIRmAlarmsIndex }
::= { airIRmAlarmsTable 1 }
airIRmAlarmsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm index."
::= { airIRmAlarmsEntry 1 }
airIRmAlarmsEventCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Code for the alarm."
::= { airIRmAlarmsEntry 2 }
airIRmAlarmsDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of the alarm."
::= { airIRmAlarmsEntry 3 }
-- airIRmPmCommon1
airIRmPmUnitType OBJECT-TYPE
SYNTAX INTEGER {
mc (1),
dx (2),
cw (3),
ch (4),
ecoCool (5),
msc (6),
ge1 (7),
ge2 (8),
dualFluid (9),
cw2 (10),
unknown (256) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit type (1)."
::= { airIRmPmCommon1 1 }
airIRmPmSwVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Software version (3)."
::= { airIRmPmCommon1 3 }
airIRmPmBusAddress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bus addresss of unit (5)."
::= { airIRmPmCommon1 5 }
airIRmPmControllerType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
c4000 (2),
c1001 (3),
c1002 (4),
c5000 (5),
c6000 (6),
c1010 (7),
c7000IOC (8),
c7000AT (9),
c7000PT (10),
c5MSC (11),
c7000PT2 (12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Controller type (7)."
::= { airIRmPmCommon1 7 }
airIRmPmGeneralError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"General Error (8)"
::= { airIRmPmCommon1 8 }
airIRmPmErrorOnBus OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error On Bus (9)"
::= { airIRmPmCommon1 9 }
-- airIRmPmCommon2
airIRmPmPCStop OBJECT-TYPE
SYNTAX AirIRmStopState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PC-STOP (1000)"
::= { airIRmPmCommon2 1 }
airIRmPmRemoteStop OBJECT-TYPE
SYNTAX AirIRmStopState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote Stop (1001)"
::= { airIRmPmCommon2 2 }
airIRmPmLocalStop OBJECT-TYPE
SYNTAX AirIRmStopState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local Stop (1002)"
::= { airIRmPmCommon2 3}
airIRmPmTimerStop OBJECT-TYPE
SYNTAX AirIRmStopState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timer Stop (1003)"
::= { airIRmPmCommon2 4}
airIRmPmSeqStop OBJECT-TYPE
SYNTAX AirIRmStopState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Seq. Stop (1004)"
::= { airIRmPmCommon2 5}
airIRmPmRemoteUPS OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote UPS (1006)"
::= { airIRmPmCommon2 7}
airIRmPmLocalUPS OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local UPS (1007)"
::= { airIRmPmCommon2 8}
airIRmPmCommonAlarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Common alarm (1010)."
::= { airIRmPmCommon2 11 }
airIRmPmResetAllAlarms OBJECT-TYPE
SYNTAX INTEGER {
doNothing (1),
reset (2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset all alarms control (1011)."
::= { airIRmPmCommon2 12 }
airIRmPmUnitOnOff OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit running state (1013)."
::= { airIRmPmCommon2 14 }
airIRmPmMaintenance OBJECT-TYPE
SYNTAX INTEGER {
notNecessary (1),
necessary (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maintenance necessary state (1014)."
::= { airIRmPmCommon2 15 }
airIRmPmUnitTemperatureScale OBJECT-TYPE
SYNTAX INTEGER {
celsius (1),
fahrenheit (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Unit Temperature Scale (1022)."
::= { airIRmPmCommon2 23 }
airIRmPmUnitWinterMode OBJECT-TYPE
SYNTAX INTEGER {
summer (1),
winter (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Winter or summer configuration mode (1023)."
::= { airIRmPmCommon2 24 }
airIRmPmDayNightMode OBJECT-TYPE
SYNTAX INTEGER {
day (1),
night (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Day or night configuration mode (1024)."
::= { airIRmPmCommon2 25 }
-- airIRmPmCommon3
airIRmPmLastMaintenanceYear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last maintenance year (1160)."
::= { airIRmPmCommon3 1 }
airIRmPmLastMaintenanceMonth OBJECT-TYPE
SYNTAX INTEGER (1..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last maintenance month (1161)."
::= { airIRmPmCommon3 2 }
airIRmPmLastMaintenanceDay OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last maintenance day (1162)."
::= { airIRmPmCommon3 3 }
airIRmPmUnitMaintenanceInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit maintenance interval in months (1163)."
::= { airIRmPmCommon3 4 }
airIRmPmRuntimeUnit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Runtime unit in hours (1164)."
::= { airIRmPmCommon3 5 }
airIRmPmStoptimeUnit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit stoptime in hours (1165)"
::= { airIRmPmCommon3 6 }
airIRmPmRuntimeCooling OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cooling runtime in hours (1166)"
::= { airIRmPmCommon3 7 }
airIRmPmRuntimeHeating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Heating runtime in hours (1167)"
::= { airIRmPmCommon3 8 }
airIRmPmRuntimeHumidification OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidification runtime in hours (1168)"
::= { airIRmPmCommon3 9 }
airIRmPmRuntimeDehumidification OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Dehumidification runtime in hours (1169)"
::= { airIRmPmCommon3 10 }
airIRmPmUnitTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon3 11 }
airIRmPmUnitTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit temperature in tenths of degrees Celsius (1170)."
::= { airIRmPmUnitTemperature 1 }
airIRmPmUnitTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit temperature in tenths of degrees Fahrenheit (1170)."
::= { airIRmPmUnitTemperature 2 }
airIRmPmUnitHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit humidity in tenths of %RH (1171)."
::= { airIRmPmCommon3 12 }
airIRmPmSetpointTemperatureDay OBJECT IDENTIFIER ::= { airIRmPmCommon3 14 }
airIRmPmSetpointTemperatureDayC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setpoint daytime temperature in tenths
of degrees Celsius (1173)."
::= { airIRmPmSetpointTemperatureDay 1 }
airIRmPmSetpointTemperatureDayF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setpoint daytime temperature in tenths
of degrees Fahrenheit (1173)."
::= { airIRmPmSetpointTemperatureDay 2 }
airIRmPmSetpointTemperatureNight OBJECT IDENTIFIER ::= { airIRmPmCommon3 15 }
airIRmPmSetpointTemperatureNightC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setpoint nighttime temperature in tenths
of degrees Celsius (1174)."
::= { airIRmPmSetpointTemperatureNight 1 }
airIRmPmSetpointTemperatureNightF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setpoint nighttime temperature in tenths
of degrees Fahrenheit (1174)."
::= { airIRmPmSetpointTemperatureNight 2 }
airIRmPmSetpointHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setpoint humidity in tenths of %RH (1176)."
::= { airIRmPmCommon3 17 }
airIRmPmUnitControlType OBJECT-TYPE
SYNTAX INTEGER {
room (1),
supply (2),
room-SupplyLimit (3),
supply-RoomLimit (4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current unit control type (1183)."
::= { airIRmPmCommon3 24 }
airIRmPmWinterModeStartTemp OBJECT IDENTIFIER ::= { airIRmPmCommon3 29 }
airIRmPmWinterModeStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Winter mode start temperature in tenths of degrees Celsius (1188)."
::= { airIRmPmWinterModeStartTemp 1 }
airIRmPmWinterModeStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Winter mode start temperature in tenths of degrees Fahrenheit (1188)."
::= { airIRmPmWinterModeStartTemp 2 }
airIRmPmWinterModeHysteresis OBJECT IDENTIFIER ::= { airIRmPmCommon3 30 }
airIRmPmWinterModeHysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Winter mode hysteresis in tenths of Kelvins (1189)"
::= { airIRmPmWinterModeHysteresis 1 }
airIRmPmWinterModeHysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Winter mode hysteresis in tenths of degrees Fahrenheit (1189)"
::= { airIRmPmWinterModeHysteresis 2 }
airIRmPmWaterTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon3 32 }
airIRmPmWaterTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water temperature in tenths of degrees Celsius (1191)."
::= { airIRmPmWaterTemperature 1 }
airIRmPmWaterTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water temperature in tenths of degrees Fahrenheit (1191)."
::= { airIRmPmWaterTemperature 2 }
airIRmPmReturnAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon3 33 }
airIRmPmReturnAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air temperature in tenths of degrees Celsius (1192)."
::= { airIRmPmReturnAirTemperature 1 }
airIRmPmReturnAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air temperature in tenths of degrees Fahrenheit (1192)."
::= { airIRmPmReturnAirTemperature 2 }
airIRmPmSupplyAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon3 34 }
airIRmPmSupplyAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air temperature in tenths of degrees Celsius (1193)."
::= { airIRmPmSupplyAirTemperature 1 }
airIRmPmSupplyAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air temperature in tenths of degrees Fahrenheit (1193)."
::= { airIRmPmSupplyAirTemperature 2 }
airIRmPmReturnAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air humidity in tenths of %RH (1194)."
::= { airIRmPmCommon3 35 }
airIRmPmSupplyAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air humidity in tenths of %RH (1195)."
::= { airIRmPmCommon3 36 }
airIRmPmOutsideAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon3 37 }
airIRmPmOutsideAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Outside air temperature in tenths of degrees Celsius (1196)"
::= { airIRmPmOutsideAirTemperature 1 }
airIRmPmOutsideAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Outside air temperature in tenths of degrees Fahrenheit (1196)"
::= { airIRmPmOutsideAirTemperature 2 }
airIRmPmOutsideAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Outside air humidity in tenths of percent relative humidity (1197)"
::= { airIRmPmCommon3 38 }
airIRmPmCoolingPriority OBJECT-TYPE
SYNTAX INTEGER {
ge (1),
cw (2),
dx (3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Cooling priority (1198)."
::= { airIRmPmCommon3 39 }
airIRmPmWaterTemperature2 OBJECT IDENTIFIER ::= { airIRmPmCommon3 43 }
airIRmPmWaterTemperature2C OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water temperature 2 in tenths of degrees Celsius (1202)."
::= { airIRmPmWaterTemperature2 1 }
airIRmPmWaterTemperature2F OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water temperature 2 in tenths of degrees Fahrenheit (1202)."
::= { airIRmPmWaterTemperature2 2 }
airIRmPmRuntimeFreeCooling OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Freecooling runtime in hours (1203)"
::= { airIRmPmCommon3 44 }
airIRmPmRuntimeMixedModeFreeCooling OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Mixed mode freecooling runtime in hours (1203)"
::= { airIRmPmCommon3 45 }
-- airIRmPmCommon4
airIRmPmNumberOfCompressors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of compressors (1761)"
::= { airIRmPmCommon4 4 }
airIRmPmNumberOfSuctionValves OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of suction valves (1762)"
::= { airIRmPmCommon4 5 }
airIRmPmNumberOfDryCoolers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of drycoolers (1763)"
::= { airIRmPmCommon4 6 }
airIRmPmNumberOfPumps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of pumps (1764)"
::= { airIRmPmCommon4 7 }
airIRmPmNumberOfElectricHeaters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of electric heaters (1765)"
::= { airIRmPmCommon4 8 }
airIRmPmNumberOfHumidifiers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of humidifiers (1766)"
::= { airIRmPmCommon4 9 }
airIRmPmNumberOfFans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of fans (1767)"
::= { airIRmPmCommon4 10 }
airIRmPmNumberOfLouvers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of louvers (1768)"
::= { airIRmPmCommon4 11 }
airIRmPmNumberOfSensors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of sensors (1769)"
::= { airIRmPmCommon4 12 }
airIRmPmNumberOfExternalAlarmInputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of external alarm inputs (1770)"
::= { airIRmPmCommon4 13 }
airIRmPmNumberOfGECWValves OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of GE/CW valves (1771)"
::= { airIRmPmCommon4 14 }
airIRmPmNumberOfHotGasReheat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of hot gas reheaters (1772)"
::= { airIRmPmCommon4 15 }
airIRmPmNumberOfPWWReheat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of PWW reheaters (1773)"
::= { airIRmPmCommon4 16 }
airIRmPmNumberOfDehumidifiers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of dehumidifiers (1774)"
::= { airIRmPmCommon4 17 }
-- airIRmPmCommon5
airIRmPmUnitEvaporationTemperature1 OBJECT IDENTIFIER ::= { airIRmPmCommon5 1 }
airIRmPmUnitEvaporationTemperature1C OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporation temperature 1 in tenths
of degrees Celsius (2232)"
::= { airIRmPmUnitEvaporationTemperature1 1 }
airIRmPmUnitEvaporationTemperature1F OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporation temperature 1 in tenths
of degrees Fahrenheit (2232)"
::= { airIRmPmUnitEvaporationTemperature1 2 }
airIRmPmUnitEvaporationPressure1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporation pressure 1 in tenths
of Bars (2233)"
::= { airIRmPmCommon5 2 }
airIRmPmUnitCondensationTemperature1 OBJECT IDENTIFIER ::= { airIRmPmCommon5 3 }
airIRmPmUnitCondensationTemperature1C OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensation temperature 1 in tenths
of degrees Celsius (2234)"
::= { airIRmPmUnitCondensationTemperature1 1 }
airIRmPmUnitCondensationTemperature1F OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensation temperature 1 in tenths
of degrees Fahrenheit (2234)"
::= { airIRmPmUnitCondensationTemperature1 2 }
airIRmPmUnitCondensationPressure1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensation pressure 1 in tenths
of Bars (2235)"
::= { airIRmPmCommon5 4 }
airIRmPmMaxLimitReturnAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon5 8 }
airIRmPmMaxLimitReturnAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit return air temperature in tenths
of degrees Celsius (2239)."
::= { airIRmPmMaxLimitReturnAirTemperature 1 }
airIRmPmMaxLimitReturnAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit return air temperature in tenths
of degrees Fahrenheit (2239)."
::= { airIRmPmMaxLimitReturnAirTemperature 2 }
airIRmPmMinLimitReturnAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon5 9 }
airIRmPmMinLimitReturnAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit return air temperature in tenths
of degrees Celsius (2240)."
::= { airIRmPmMinLimitReturnAirTemperature 1 }
airIRmPmMinLimitReturnAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit return air temperature in tenths
of degrees Fahrenheit (2240)."
::= { airIRmPmMinLimitReturnAirTemperature 2 }
airIRmPmMaxLimitSupplyAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon5 10 }
airIRmPmMaxLimitSupplyAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit supply air temperature in tenths
of degrees Celsius (2241)."
::= { airIRmPmMaxLimitSupplyAirTemperature 1 }
airIRmPmMaxLimitSupplyAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit supply air temperature in tenths
of degrees Fahrenheit (2241)."
::= { airIRmPmMaxLimitSupplyAirTemperature 2 }
airIRmPmMinLimitSupplyAirTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon5 11 }
airIRmPmMinLimitSupplyAirTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit supply air temperature in tenths
of degrees Celsius (2242)."
::= { airIRmPmMinLimitSupplyAirTemperature 1 }
airIRmPmMinLimitSupplyAirTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit supply air temperature in tenths
of degrees Fahrenheit (2242)."
::= { airIRmPmMinLimitSupplyAirTemperature 2 }
airIRmPmMaxLimitWaterTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon5 12 }
airIRmPmMaxLimitWaterTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit water temperature in tenths of degrees Celsius (2243)."
::= { airIRmPmMaxLimitWaterTemperature 1 }
airIRmPmMaxLimitWaterTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit water temperature in tenths
of degrees Fahrenheit (2243)."
::= { airIRmPmMaxLimitWaterTemperature 2 }
airIRmPmMinLimitWaterTemperature OBJECT IDENTIFIER ::= { airIRmPmCommon5 13 }
airIRmPmMinLimitWaterTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit water temperature in tenths
of degrees Celsius (2244)."
::= { airIRmPmMinLimitWaterTemperature 1 }
airIRmPmMinLimitWaterTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit water temperature in tenths
of degrees Fahrenheit (2244)."
::= { airIRmPmMinLimitWaterTemperature 2 }
airIRmPmMaxLimitReturnAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit return air humidity in tenths of %RH (2245)."
::= { airIRmPmCommon5 14 }
airIRmPmMinLimitReturnAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit return air humidity in tenths of %RH (2246)."
::= { airIRmPmCommon5 15 }
airIRmPmMaxLimitSupplyAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum limit supply air humidity in tenths of %RH (2247)."
::= { airIRmPmCommon5 16 }
airIRmPmMinLimitSupplyAirHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum limit supply air humidity in tenths of %RH (2248)."
::= { airIRmPmCommon5 17 }
airIRmPmLowPressureWinterDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Winter mode low pressure delay in seconds (2249)"
::= { airIRmPmCommon5 18 }
airIRmPmUnitCondensationPressure2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensation pressure 2 in tenths of Bars (2250)"
::= { airIRmPmCommon5 19 }
airIRmPmUnitOverloadSwitch OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit overload switch setting in tenths of Kelvins (2251)"
::= { airIRmPmCommon5 20 }
airIRmPmUnitCondensationTemperature2 OBJECT IDENTIFIER ::= { airIRmPmCommon5 41 }
airIRmPmUnitCondensationTemperature2C OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensation temperature 2 in tenths
of degrees Celsius (2272)"
::= { airIRmPmUnitCondensationTemperature2 1 }
airIRmPmUnitCondensationTemperature2F OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit condensation temperature 2 in tenths
of degrees Fahrenheit (2272)"
::= { airIRmPmUnitCondensationTemperature2 2 }
airIRmPmUnitEvaporationPressure2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporation pressure 2 in tenths
of Bars (2273)"
::= { airIRmPmCommon5 42 }
airIRmPmUnitEvaporationTemperature2 OBJECT IDENTIFIER ::= { airIRmPmCommon5 43 }
airIRmPmUnitEvaporationTemperature2C OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporation temperature 2 in tenths
of degrees Celsius (2274)"
::= { airIRmPmUnitEvaporationTemperature2 1 }
airIRmPmUnitEvaporationTemperature2F OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit evaporation temperature 2 in tenths
of degrees Fahrenheit (2274)"
::= { airIRmPmUnitEvaporationTemperature2 2 }
-- airIRmPmCompressor1
airIRmPmCmp1ManOperationActive OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 1 manual operation active (4401)"
::= { airIRmPmCompressor1 2 }
airIRmPmCmp1ManOperationState OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 1 manual operation state (4402)"
::= { airIRmPmCompressor1 3 }
airIRmPmCmp1Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 1 running (4403)"
::= { airIRmPmCompressor1 4 }
airIRmPmCmp1StartTempSummer OBJECT IDENTIFIER ::= { airIRmPmCompressor1 17 }
airIRmPmCmp1StartTempSummerK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 summer mode start temperature
in tenths of Kelvins (4416)"
::= { airIRmPmCmp1StartTempSummer 1 }
airIRmPmCmp1StartTempSummerF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 summer mode start temperature
in tenths of degrees Fahrenheit (4416)"
::= { airIRmPmCmp1StartTempSummer 2 }
airIRmPmCmp1HysteresisSummer OBJECT IDENTIFIER ::= { airIRmPmCompressor1 18 }
airIRmPmCmp1HysteresisSummerK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 summer mode hysteresis setting
in tenths of Kelvins (4417)"
::= { airIRmPmCmp1HysteresisSummer 1 }
airIRmPmCmp1HysteresisSummerF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 summer mode hysteresis setting
in tenths of Fahrenheit (4417)"
::= { airIRmPmCmp1HysteresisSummer 2 }
airIRmPmCmp1StartTempWinter OBJECT IDENTIFIER ::= { airIRmPmCompressor1 19 }
airIRmPmCmp1StartTempWinterK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 winter mode start temperature
in tenths of Kelvins (4418)"
::= { airIRmPmCmp1StartTempWinter 1 }
airIRmPmCmp1StartTempWinterF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 winter mode start temperature
in tenths of degrees Fahrenheit (4418)"
::= { airIRmPmCmp1StartTempWinter 2 }
airIRmPmCmp1HysteresisWinter OBJECT IDENTIFIER ::= { airIRmPmCompressor1 20 }
airIRmPmCmp1HysteresisWinterK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 Winter mode hysteresis setting
in tenths of Kelvins (4419)"
::= { airIRmPmCmp1HysteresisWinter 1 }
airIRmPmCmp1HysteresisWinterF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 1 Winter mode hysteresis setting
in tenths of Fahrenheit (4419)"
::= { airIRmPmCmp1HysteresisWinter 2 }
airIRmPmCmp1Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 1 runtime in hours (4428)"
::= { airIRmPmCompressor1 29 }
-- airIRmPmCompressor2
airIRmPmCmp2ManOperationActive OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 2 manual operation active (4501)"
::= { airIRmPmCompressor2 2 }
airIRmPmCmp2ManOperationState OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 2 manual operation state (4502)"
::= { airIRmPmCompressor2 3 }
airIRmPmCmp2Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 2 running (4503)"
::= { airIRmPmCompressor2 4 }
airIRmPmCmp2StartTempSummer OBJECT IDENTIFIER ::= { airIRmPmCompressor2 17 }
airIRmPmCmp2StartTempSummerK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 summer mode start temperature
in tenths of Kelvins (4516)"
::= { airIRmPmCmp2StartTempSummer 1 }
airIRmPmCmp2StartTempSummerF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 summer mode start temperature
in tenths of degrees Fahrenheit (4516)"
::= { airIRmPmCmp2StartTempSummer 2 }
airIRmPmCmp2HysteresisSummer OBJECT IDENTIFIER ::= { airIRmPmCompressor2 18 }
airIRmPmCmp2HysteresisSummerK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 summer mode hysteresis setting
in tenths of Kelvins (4517)"
::= { airIRmPmCmp2HysteresisSummer 1 }
airIRmPmCmp2HysteresisSummerF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 summer mode hysteresis setting
in tenths of Fahrenheit (4517)"
::= { airIRmPmCmp2HysteresisSummer 2 }
airIRmPmCmp2StartTempWinter OBJECT IDENTIFIER ::= { airIRmPmCompressor2 19 }
airIRmPmCmp2StartTempWinterK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 winter mode start temperature
in tenths of Kelvins (4518)"
::= { airIRmPmCmp2StartTempWinter 1 }
airIRmPmCmp2StartTempWinterF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 winter mode start temperature
in tenths of degrees Fahrenheit (4518)"
::= { airIRmPmCmp2StartTempWinter 2 }
airIRmPmCmp2HysteresisWinter OBJECT IDENTIFIER ::= { airIRmPmCompressor2 20 }
airIRmPmCmp2HysteresisWinterK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 Winter mode hysteresis setting
in tenths of Kelvins (4519)"
::= { airIRmPmCmp2HysteresisWinter 1 }
airIRmPmCmp2HysteresisWinterF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Compressor 2 Winter mode hysteresis setting
in tenths of Fahrenheit (4519)"
::= { airIRmPmCmp2HysteresisWinter 2 }
airIRmPmCmp2Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor 2 runtime in hours (4528)"
::= { airIRmPmCompressor2 29 }
-- airIRmPmSuctionValve1
-- Empty
-- airIRmPmSuctionValve2
-- Empty
-- airIRmPmEheating1
airIRmPmEheating1ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #1 manual operation enable (4801)"
::= { airIRmPmEheating1 2 }
airIRmPmEheating1Running OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #1 running state (4803)"
::= { airIRmPmEheating1 4 }
airIRmPmEheating1ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #1 running in manual operation mode (4804)"
::= { airIRmPmEheating1 5 }
airIRmPmEheating1Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
pwm (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #1 type (4808)"
::= { airIRmPmEheating1 9 }
airIRmPmEheating1StartTemperature OBJECT IDENTIFIER ::= { airIRmPmEheating1 10 }
airIRmPmEheating1StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #1 start temperature in tenths of Kelvins (4809)"
::= { airIRmPmEheating1StartTemperature 1 }
airIRmPmEheating1StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #1 start temperature in tenths of degrees Fahrenheit (4809)"
::= { airIRmPmEheating1StartTemperature 2 }
airIRmPmEheating1Hysteresis OBJECT IDENTIFIER ::= { airIRmPmEheating1 11 }
airIRmPmEheating1HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #1 hysteresis in tenths of Kelvins (4810)"
::= { airIRmPmEheating1Hysteresis 1 }
airIRmPmEheating1HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #1 hysteresis in tenths of degrees Fahrenheit (4810)"
::= { airIRmPmEheating1Hysteresis 2 }
airIRmPmEheating1Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #1 runtime in hours (4816)"
::= { airIRmPmEheating1 17 }
-- airIRmPmEheating2
airIRmPmEheating2ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #2 manual operation enable (4901)"
::= { airIRmPmEheating2 2 }
airIRmPmEheating2Running OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #2 running state (4903)"
::= { airIRmPmEheating2 4 }
airIRmPmEheating2ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #2 running in manual operation mode (4904)"
::= { airIRmPmEheating2 5 }
airIRmPmEheating2Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
pwm (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #2 type (4908)"
::= { airIRmPmEheating2 9 }
airIRmPmEheating2StartTemperature OBJECT IDENTIFIER ::= { airIRmPmEheating2 10 }
airIRmPmEheating2StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #2 start temperature in tenths of Kelvins (4909)"
::= { airIRmPmEheating2StartTemperature 1 }
airIRmPmEheating2StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #2 start temperature in tenths of degrees Fahrenheit (4909)"
::= { airIRmPmEheating2StartTemperature 2 }
airIRmPmEheating2Hysteresis OBJECT IDENTIFIER ::= { airIRmPmEheating2 11 }
airIRmPmEheating2HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #2 hysteresis in tenths of Kelvins (4910)"
::= { airIRmPmEheating2Hysteresis 1 }
airIRmPmEheating2HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #2 hysteresis in tenths of degrees Fahrenheit (4910)"
::= { airIRmPmEheating2Hysteresis 2 }
airIRmPmEheating2Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #2 runtime in hours (4916)"
::= { airIRmPmEheating2 17 }
-- airIRmPmEheating3
airIRmPmEheating3ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #3 manual operation enable (5001)"
::= { airIRmPmEheating3 2 }
airIRmPmEheating3Running OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #3 running state (5003)"
::= { airIRmPmEheating3 4 }
airIRmPmEheating3ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #3 running in manual operation mode (5004)"
::= { airIRmPmEheating3 5 }
airIRmPmEheating3Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
pwm (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #3 type (5008)"
::= { airIRmPmEheating3 9 }
airIRmPmEheating3StartTemperature OBJECT IDENTIFIER ::= { airIRmPmEheating3 10 }
airIRmPmEheating3StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #3 start temperature in tenths of Kelvins (5009)"
::= { airIRmPmEheating3StartTemperature 1 }
airIRmPmEheating3StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #3 start temperature in tenths of degrees Fahrenheit (5009)"
::= { airIRmPmEheating3StartTemperature 2 }
airIRmPmEheating3Hysteresis OBJECT IDENTIFIER ::= { airIRmPmEheating3 11 }
airIRmPmEheating3HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #3 hysteresis in tenths of Kelvins (5010)"
::= { airIRmPmEheating3Hysteresis 1 }
airIRmPmEheating3HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #3 hysteresis in tenths of degrees Fahrenheit (5010)"
::= { airIRmPmEheating3Hysteresis 2 }
airIRmPmEheating3Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #3 runtime in hours (5016)"
::= { airIRmPmEheating3 17 }
-- airIRmPmEheating4
airIRmPmEheating4ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #4 manual operation enable (5101)"
::= { airIRmPmEheating4 2 }
airIRmPmEheating4Running OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #4 running state (5103)"
::= { airIRmPmEheating4 4 }
airIRmPmEheating4ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #4 running in manual operation mode (5104)"
::= { airIRmPmEheating4 5 }
airIRmPmEheating4Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
pwm (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #4 type (5108)"
::= { airIRmPmEheating4 9 }
airIRmPmEheating4StartTemperature OBJECT IDENTIFIER ::= { airIRmPmEheating4 10 }
airIRmPmEheating4StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #4 start temperature in tenths of Kelvins (5109)"
::= { airIRmPmEheating4StartTemperature 1 }
airIRmPmEheating4StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #4 start temperature in tenths of degrees Fahrenheit (5109)"
::= { airIRmPmEheating4StartTemperature 2 }
airIRmPmEheating4Hysteresis OBJECT IDENTIFIER ::= { airIRmPmEheating4 11 }
airIRmPmEheating4HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #4 hysteresis in tenths of Kelvins (5110)"
::= { airIRmPmEheating4Hysteresis 1 }
airIRmPmEheating4HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Electric heater #4 hysteresis in tenths of degrees Fahrenheit (5110)"
::= { airIRmPmEheating4Hysteresis 2 }
airIRmPmEheating4Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Electric heater #4 runtime in hours (5116)"
::= { airIRmPmEheating4 17 }
-- airIRmPmGECWvalve
airIRmPmGECWvalveManOpEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GE/CW valve manual operation enable (5201)"
::= { airIRmPmGECWvalve 2 }
airIRmPmGECWvalveStartTemperature OBJECT IDENTIFIER ::= { airIRmPmGECWvalve 9 }
airIRmPmGECWvalveStartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE/CW valve start temperature in tenths of Kelvins (5208)"
::= { airIRmPmGECWvalveStartTemperature 1 }
airIRmPmGECWvalveStartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE/CW valve start temperature in tenths of degrees Fahrenheit (5208)"
::= { airIRmPmGECWvalveStartTemperature 2 }
airIRmPmGECWvalveLinearRange OBJECT IDENTIFIER ::= { airIRmPmGECWvalve 10 }
airIRmPmGECWvalveLinearRangeK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE/CW valve linear range in tenths of Kelvins (5209)"
::= { airIRmPmGECWvalveLinearRange 1 }
airIRmPmGECWvalveLinearRangeF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE/CW valve linear range in tenths of degrees Fahrenheit (5209)"
::= { airIRmPmGECWvalveLinearRange 2 }
airIRmPmGECWvalveGEOffTemp OBJECT IDENTIFIER ::= { airIRmPmGECWvalve 12 }
airIRmPmGECWvalveGEOffTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE/CW valve GE off temperature in tenths of degrees Celsius (5211)"
::= { airIRmPmGECWvalveGEOffTemp 1 }
airIRmPmGECWvalveGEOffTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE/CW valve GE off temperature in tenths of degrees Fahrenheit (5211)"
::= { airIRmPmGECWvalveGEOffTemp 2 }
airIRmPmGECWvalveOpeningGrade OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GE/CW valve opening grade in percent (5214)"
::= { airIRmPmGECWvalve 15 }
airIRmPmGECWvalveManOpOpeningGrade OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GE/CW valve manual operation opening grade in percent (5215)"
::= { airIRmPmGECWvalve 16 }
-- airIRmPmGvalve
airIRmPmGvalveManOperationEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"G-valve manual operation enable (5301)"
::= { airIRmPmGvalve 2 }
airIRmPmGvalvePreOpeningTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"G-valve pre-opening time in seconds (5310)"
::= { airIRmPmGvalve 11 }
airIRmPmGvalvePreOpeningGrade OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"G-valve pre-opening grade in percent (5311)"
::= { airIRmPmGvalve 12 }
airIRmPmGvalveOpeningGrade OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"G-valve opening grade in percent (5312)"
::= { airIRmPmGvalve 13 }
airIRmPmGvalveManOpOpeningGrade OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"G-valve manual operation opening grade in percent (5313)"
::= { airIRmPmGvalve 14 }
-- airIRmPmDrycooler1
airIRmPmDrycooler1ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 1 manual operation enable setting (5401)"
::= { airIRmPmDrycooler1 2 }
airIRmPmDrycooler1Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 1 running (5402)"
::= { airIRmPmDrycooler1 3 }
airIRmPmDrycooler1ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 1 manual operation running (5404)"
::= { airIRmPmDrycooler1 5 }
airIRmPmDrycooler1WinterStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler1 9 }
airIRmPmDrycooler1WinterStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 1 winter mode start temperature
in tenths of degrees Celsius (5408)"
::= { airIRmPmDrycooler1WinterStartTemp 1 }
airIRmPmDrycooler1WinterStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 1 winter mode start temperature
in tenths of degrees Fahrenheit (5408)"
::= { airIRmPmDrycooler1WinterStartTemp 2 }
airIRmPmDrycooler1SummerStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler1 10 }
airIRmPmDrycooler1SummerStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 1 summer mode start temperature
in tenths of degrees Celsius (5409)"
::= { airIRmPmDrycooler1SummerStartTemp 1 }
airIRmPmDrycooler1SummerStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 1 summer mode start temperature
in tenths of degrees Fahrenheit (5409)"
::= { airIRmPmDrycooler1SummerStartTemp 2 }
airIRmPmDrycooler1Hysteresis OBJECT IDENTIFIER ::= { airIRmPmDrycooler1 11 }
airIRmPmDrycooler1HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 1 hysteresis in tenths of Kelvins (5410)"
::= { airIRmPmDrycooler1Hysteresis 1 }
airIRmPmDrycooler1HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 1 hysteresis in tenths of degrees Fahrenheit (5410)"
::= { airIRmPmDrycooler1Hysteresis 2 }
airIRmPmDrycooler1Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 1 runtime in hours (5415)"
::= { airIRmPmDrycooler1 16 }
-- airIRmPmDrycooler2
airIRmPmDrycooler2ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 2 manual operation enable setting (5501)"
::= { airIRmPmDrycooler2 2 }
airIRmPmDrycooler2Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 2 running (5502)"
::= { airIRmPmDrycooler2 3 }
airIRmPmDrycooler2ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 2 manual operation running (5504)"
::= { airIRmPmDrycooler2 5 }
airIRmPmDrycooler2WinterStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler2 9 }
airIRmPmDrycooler2WinterStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 2 winter mode start temperature
in tenths of degrees Celsius (5508)"
::= { airIRmPmDrycooler2WinterStartTemp 1 }
airIRmPmDrycooler2WinterStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 2 winter mode start temperature
in tenths of degrees Fahrenheit (5508)"
::= { airIRmPmDrycooler2WinterStartTemp 2 }
airIRmPmDrycooler2SummerStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler2 10 }
airIRmPmDrycooler2SummerStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 2 summer mode start temperature
in tenths of degrees Celsius (5509)"
::= { airIRmPmDrycooler2SummerStartTemp 1 }
airIRmPmDrycooler2SummerStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 2 summer mode start temperature
in tenths of degrees Fahrenheit (5509)"
::= { airIRmPmDrycooler2SummerStartTemp 2 }
airIRmPmDrycooler2Hysteresis OBJECT IDENTIFIER ::= { airIRmPmDrycooler2 11 }
airIRmPmDrycooler2HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 2 hysteresis in tenths of Kelvins (5510)"
::= { airIRmPmDrycooler2Hysteresis 1 }
airIRmPmDrycooler2HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 2 hysteresis in tenths of degrees Fahrenheit (5510)"
::= { airIRmPmDrycooler2Hysteresis 2 }
airIRmPmDrycooler2Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 2 runtime in hours (5515)"
::= { airIRmPmDrycooler2 16 }
-- airIRmPmDrycooler3
airIRmPmDrycooler3ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 3 manual operation enable setting (5601)"
::= { airIRmPmDrycooler3 2 }
airIRmPmDrycooler3Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 3 running (5602)"
::= { airIRmPmDrycooler3 3 }
airIRmPmDrycooler3ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 3 manual operation running (5604)"
::= { airIRmPmDrycooler3 5 }
airIRmPmDrycooler3WinterStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler3 9 }
airIRmPmDrycooler3WinterStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 3 winter mode start temperature
in tenths of degrees Celsius (5608)"
::= { airIRmPmDrycooler3WinterStartTemp 1 }
airIRmPmDrycooler3WinterStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 3 winter mode start temperature
in tenths of degrees Fahrenheit (5608)"
::= { airIRmPmDrycooler3WinterStartTemp 2 }
airIRmPmDrycooler3SummerStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler3 10 }
airIRmPmDrycooler3SummerStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 3 summer mode start temperature
in tenths of degrees Celsius (5609)"
::= { airIRmPmDrycooler3SummerStartTemp 1 }
airIRmPmDrycooler3SummerStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 3 summer mode start temperature
in tenths of degrees Fahrenheit (5609)"
::= { airIRmPmDrycooler3SummerStartTemp 2 }
airIRmPmDrycooler3Hysteresis OBJECT IDENTIFIER ::= { airIRmPmDrycooler3 11 }
airIRmPmDrycooler3HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 3 hysteresis in tenths of Kelvins (5610)"
::= { airIRmPmDrycooler3Hysteresis 1 }
airIRmPmDrycooler3HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 3 hysteresis in tenths of degrees Fahrenheit (5610)"
::= { airIRmPmDrycooler3Hysteresis 2 }
airIRmPmDrycooler3Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 3 runtime in hours (5615)"
::= { airIRmPmDrycooler3 16 }
-- airIRmPmDrycooler4
airIRmPmDrycooler4ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 4 manual operation enable setting (5701)"
::= { airIRmPmDrycooler4 2 }
airIRmPmDrycooler4Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 4 running (5702)"
::= { airIRmPmDrycooler4 3 }
airIRmPmDrycooler4ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 4 manual operation running (5704)"
::= { airIRmPmDrycooler4 5 }
airIRmPmDrycooler4WinterStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler4 9 }
airIRmPmDrycooler4WinterStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 4 winter mode start temperature
in tenths of degrees Celsius (5708)"
::= { airIRmPmDrycooler4WinterStartTemp 1 }
airIRmPmDrycooler4WinterStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 4 winter mode start temperature
in tenths of degrees Fahrenheit (5708)"
::= { airIRmPmDrycooler4WinterStartTemp 2 }
airIRmPmDrycooler4SummerStartTemp OBJECT IDENTIFIER ::= { airIRmPmDrycooler4 10 }
airIRmPmDrycooler4SummerStartTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 4 summer mode start temperature
in tenths of degrees Celsius (5709)"
::= { airIRmPmDrycooler4SummerStartTemp 1 }
airIRmPmDrycooler4SummerStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 4 summer mode start temperature
in tenths of degrees Fahrenheit (5709)"
::= { airIRmPmDrycooler4SummerStartTemp 2 }
airIRmPmDrycooler4Hysteresis OBJECT IDENTIFIER ::= { airIRmPmDrycooler4 11 }
airIRmPmDrycooler4HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 4 hysteresis in tenths of Kelvins (5710)"
::= { airIRmPmDrycooler4Hysteresis 1 }
airIRmPmDrycooler4HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drycooler 4 hysteresis in tenths of degrees Fahrenheit (5710)"
::= { airIRmPmDrycooler4Hysteresis 2 }
airIRmPmDrycooler4Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler 4 runtime in hours (5715)"
::= { airIRmPmDrycooler4 16 }
-- airIRmPmPump1
airIRmPmPump1ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 1 manual operation enable state (5801)"
::= { airIRmPmPump1 2 }
airIRmPmPump1Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 1 running (5802)"
::= { airIRmPmPump1 3 }
airIRmPmPump1ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 1 manual operation running (5805)"
::= { airIRmPmPump1 6 }
airIRmPmPump1StartTemperature OBJECT IDENTIFIER ::= { airIRmPmPump1 10 }
airIRmPmPump1StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 starting temperature in tenths of Kelvins (5809)"
::= { airIRmPmPump1StartTemperature 1 }
airIRmPmPump1StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 starting temperature in tenths of degrees Fahrenheit (5809)"
::= { airIRmPmPump1StartTemperature 2 }
airIRmPmPump1Hysteresis OBJECT IDENTIFIER ::= { airIRmPmPump1 11 }
airIRmPmPump1HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 hysteresis in tenths of Kelvins (5810)"
::= { airIRmPmPump1Hysteresis 1 }
airIRmPmPump1HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 hysteresis in tenths of degrees Fahrenheit (5810)"
::= { airIRmPmPump1Hysteresis 2 }
airIRmPmPump1LinearRange OBJECT IDENTIFIER ::= { airIRmPmPump1 12 }
airIRmPmPump1LinearRangeK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 linear range in tenths of Kelvins (5811)"
::= { airIRmPmPump1LinearRange 1 }
airIRmPmPump1LinearRangeF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 linear range in tenths of degrees Fahrenheit (5811)"
::= { airIRmPmPump1LinearRange 2 }
airIRmPmPump1PressureSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 pressure setpoint in tenths of Bars (5812)"
::= { airIRmPmPump1 13 }
airIRmPmPump1Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 1 runtime in hours (5820)"
::= { airIRmPmPump1 21 }
airIRmPmPump1Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 1 speed in percent (5821)"
::= { airIRmPmPump1 22 }
airIRmPmPump1ControlCycle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 control cycle length in seconds (5827)"
::= { airIRmPmPump1 28 }
airIRmPmPump1MaxAdjust OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 maximum adjustment in percent (5828)"
::= { airIRmPmPump1 29 }
airIRmPmPump1ControlFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 1 control factor setting (5829)"
::= { airIRmPmPump1 30 }
-- airIRmPmPump2
airIRmPmPump2ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 2 manual operation enable state (5901)"
::= { airIRmPmPump2 2 }
airIRmPmPump2Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 2 running (5902)"
::= { airIRmPmPump2 3 }
airIRmPmPump2ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 2 manual operation running (5905)"
::= { airIRmPmPump2 6 }
airIRmPmPump2StartTemperature OBJECT IDENTIFIER ::= { airIRmPmPump2 10 }
airIRmPmPump2StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 starting temperature in tenths of Kelvins (5909)"
::= { airIRmPmPump2StartTemperature 1 }
airIRmPmPump2StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 starting temperature in tenths of degrees Fahrenheit (5909)"
::= { airIRmPmPump2StartTemperature 2 }
airIRmPmPump2Hysteresis OBJECT IDENTIFIER ::= { airIRmPmPump2 11 }
airIRmPmPump2HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 hysteresis in tenths of Kelvins (5910)"
::= { airIRmPmPump2Hysteresis 1 }
airIRmPmPump2HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 hysteresis in tenths of degrees Fahrenheit (5910)"
::= { airIRmPmPump2Hysteresis 2 }
airIRmPmPump2LinearRange OBJECT IDENTIFIER ::= { airIRmPmPump2 12 }
airIRmPmPump2LinearRangeK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 linear range in tenths of Kelvins (5911)"
::= { airIRmPmPump2LinearRange 1 }
airIRmPmPump2LinearRangeF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 linear range in tenths of degrees Fahrenheit (5911)"
::= { airIRmPmPump2LinearRange 2 }
airIRmPmPump2PressureSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 pressure setpoint in tenths of Bars (5912)"
::= { airIRmPmPump2 13 }
airIRmPmPump2Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 2 runtime in hours (5920)"
::= { airIRmPmPump2 21 }
airIRmPmPump2Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 2 speed in percent (5921)"
::= { airIRmPmPump2 22 }
airIRmPmPump2ControlCycle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 control cycle length in seconds (5927)"
::= { airIRmPmPump2 28 }
airIRmPmPump2MaxAdjust OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 maximum adjustment in percent (5928)"
::= { airIRmPmPump2 29 }
airIRmPmPump2ControlFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 2 control factor setting (5929)"
::= { airIRmPmPump2 30 }
-- airIRmPmPump3
airIRmPmPump3ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 3 manual operation enable state (6001)"
::= { airIRmPmPump3 2 }
airIRmPmPump3Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 3 running (6002)"
::= { airIRmPmPump3 3 }
airIRmPmPump3ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 3 manual operation running (6005)"
::= { airIRmPmPump3 6 }
airIRmPmPump3StartTemperature OBJECT IDENTIFIER ::= { airIRmPmPump3 10 }
airIRmPmPump3StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 starting temperature in tenths of Kelvins (6009)"
::= { airIRmPmPump3StartTemperature 1 }
airIRmPmPump3StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 starting temperature in tenths of degrees Fahrenheit (6009)"
::= { airIRmPmPump3StartTemperature 2 }
airIRmPmPump3Hysteresis OBJECT IDENTIFIER ::= { airIRmPmPump3 11 }
airIRmPmPump3HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 hysteresis in tenths of Kelvins (6010)"
::= { airIRmPmPump3Hysteresis 1 }
airIRmPmPump3HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 hysteresis in tenths of degrees Fahrenheit (6010)"
::= { airIRmPmPump3Hysteresis 2 }
airIRmPmPump3LinearRange OBJECT IDENTIFIER ::= { airIRmPmPump3 12 }
airIRmPmPump3LinearRangeK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 linear range in tenths of Kelvins (6011)"
::= { airIRmPmPump3LinearRange 1 }
airIRmPmPump3LinearRangeF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 linear range in tenths of degrees Fahrenheit (6011)"
::= { airIRmPmPump3LinearRange 2 }
airIRmPmPump3PressureSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 pressure setpoint in tenths of Bars (6012)"
::= { airIRmPmPump3 13 }
airIRmPmPump3Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 3 runtime in hours (6020)"
::= { airIRmPmPump3 21 }
airIRmPmPump3Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 3 speed in percent (6021)"
::= { airIRmPmPump3 22 }
airIRmPmPump3ControlCycle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 control cycle length in seconds (6027)"
::= { airIRmPmPump3 28 }
airIRmPmPump3MaxAdjust OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 maximum adjustment in percent (6028)"
::= { airIRmPmPump3 29 }
airIRmPmPump3ControlFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 3 control factor setting (6029)"
::= { airIRmPmPump3 30 }
-- airIRmPmPump4
airIRmPmPump4ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 4 manual operation enable state (6101)"
::= { airIRmPmPump4 2 }
airIRmPmPump4Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 4 running (6102)"
::= { airIRmPmPump4 3 }
airIRmPmPump4ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 4 manual operation running (6105)"
::= { airIRmPmPump4 6 }
airIRmPmPump4StartTemperature OBJECT IDENTIFIER ::= { airIRmPmPump4 10 }
airIRmPmPump4StartTemperatureK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 starting temperature in tenths of Kelvins (6109)"
::= { airIRmPmPump4StartTemperature 1 }
airIRmPmPump4StartTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 starting temperature in tenths of degrees Fahrenheit (6109)"
::= { airIRmPmPump4StartTemperature 2 }
airIRmPmPump4Hysteresis OBJECT IDENTIFIER ::= { airIRmPmPump4 11 }
airIRmPmPump4HysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 hysteresis in tenths of Kelvins (6110)"
::= { airIRmPmPump4Hysteresis 1 }
airIRmPmPump4HysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 hysteresis in tenths of degrees Fahrenheit (6110)"
::= { airIRmPmPump4Hysteresis 2 }
airIRmPmPump4LinearRange OBJECT IDENTIFIER ::= { airIRmPmPump4 12 }
airIRmPmPump4LinearRangeK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 linear range in tenths of Kelvins (6111)"
::= { airIRmPmPump4LinearRange 1 }
airIRmPmPump4LinearRangeF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 linear range in tenths of degrees Fahrenheit (6111)"
::= { airIRmPmPump4LinearRange 2 }
airIRmPmPump4PressureSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 pressure setpoint in tenths of Bars (6112)"
::= { airIRmPmPump4 13 }
airIRmPmPump4Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 4 runtime in hours (6120)"
::= { airIRmPmPump4 21 }
airIRmPmPump4Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump 4 speed in percent (6121)"
::= { airIRmPmPump4 22 }
airIRmPmPump4ControlCycle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 control cycle length in seconds (6127)"
::= { airIRmPmPump4 28 }
airIRmPmPump4MaxAdjust OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 maximum adjustment in percent (6128)"
::= { airIRmPmPump4 29 }
airIRmPmPump4ControlFactor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pump 4 control factor setting (6129)"
::= { airIRmPmPump4 30 }
-- airIRmPmHotgasHeating
airIRmPmHotgasHeatRunning OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hotgas heat running state. (6202)"
::= { airIRmPmHotgasHeating 3 }
-- airIRmPmPWWHeating
airIRmPmPWWHeatingManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PWW-heating manual operation enable (6301)"
::= { airIRmPmPWWHeating 2 }
airIRmPmPWWHeatingRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PWW-heating running (6302)"
::= { airIRmPmPWWHeating 3 }
airIRmPmPWWHeatingManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PWW-heating manual operation running (6303)"
::= { airIRmPmPWWHeating 4 }
airIRmPmPWWHeatingType OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
undefined (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PWW-heating type (6308)"
::= { airIRmPmPWWHeating 9 }
airIRmPmPWWHeatingStartTemp OBJECT IDENTIFIER ::= { airIRmPmPWWHeating 10 }
airIRmPmPWWHeatingStartTempK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating starting temperature in Kelvins (6309)"
::= { airIRmPmPWWHeatingStartTemp 1 }
airIRmPmPWWHeatingStartTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating starting temperature in degrees Fahrenheit (6309)"
::= { airIRmPmPWWHeatingStartTemp 2 }
airIRmPmPWWHeatingHysteresis OBJECT IDENTIFIER ::= { airIRmPmPWWHeating 12 }
airIRmPmPWWHeatingHysteresisK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating hysteresis in Kelvins (6311)"
::= { airIRmPmPWWHeatingHysteresis 1 }
airIRmPmPWWHeatingHysteresisF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating hysteresis in degrees Fahrenheit (6311)"
::= { airIRmPmPWWHeatingHysteresis 2 }
airIRmPmPWWHeatingLinearRange OBJECT IDENTIFIER ::= { airIRmPmPWWHeating 13 }
airIRmPmPWWHeatingLinearRangeK OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating linear range in Kelvins (6312)"
::= { airIRmPmPWWHeatingLinearRange 1 }
airIRmPmPWWHeatingLinearRangeF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating linear range in degrees Fahrenheit (6312)"
::= { airIRmPmPWWHeatingLinearRange 2 }
airIRmPmPWWHeatingCurrentValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating current value in percent (6315)"
::= { airIRmPmPWWHeating 16 }
airIRmPmPWWHeatingManOpValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PWW-heating manual operation value in percent (6316)"
::= { airIRmPmPWWHeating 17 }
-- airIRmPmHumidifier1
airIRmPmHumidifier1ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 manual operation enable (6401)"
::= { airIRmPmHumidifier1 2 }
airIRmPmHumidifier1Running OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 running state (6402)"
::= { airIRmPmHumidifier1 3 }
airIRmPmHumidifier1ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 manual operation running state (6404)"
::= { airIRmPmHumidifier1 5 }
airIRmPmHumidifier1Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
proportional (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 type (6416)"
::= { airIRmPmHumidifier1 17 }
airIRmPmHumidifier1StartHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #1 start humidity in tenths
of percent relative humidity (6417)"
::= { airIRmPmHumidifier1 18 }
airIRmPmHumidifier1Hysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #1 hysteresis in tenths
of percent relative humidity (6419)"
::= { airIRmPmHumidifier1 20 }
airIRmPmHumidifier1LinearRange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #1 linear range in tenths
of percent relative humidity per Kelvin (6420)"
::= { airIRmPmHumidifier1 21 }
airIRmPmHumidifier1Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 runtime in hours (6426)"
::= { airIRmPmHumidifier1 27 }
airIRmPmHumidifier1CurrentValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 current value in percent (6427)"
::= { airIRmPmHumidifier1 28 }
airIRmPmHumidifier1ManOpValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #1 manual operation value in percent (6428)"
::= { airIRmPmHumidifier1 29 }
-- airIRmPmHumidifier2
airIRmPmHumidifier2ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 manual operation enable (6501)"
::= { airIRmPmHumidifier2 2 }
airIRmPmHumidifier2Running OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 running state (6502)"
::= { airIRmPmHumidifier2 3 }
airIRmPmHumidifier2ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 manual operation running state (6504)"
::= { airIRmPmHumidifier2 5 }
airIRmPmHumidifier2Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
proportional (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 type (6516)"
::= { airIRmPmHumidifier2 17 }
airIRmPmHumidifier2StartHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #2 start humidity in tenths
of percent relative humidity (6517)"
::= { airIRmPmHumidifier2 18 }
airIRmPmHumidifier2Hysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #2 hysteresis in tenths
of percent relative humidity (6519)"
::= { airIRmPmHumidifier2 20 }
airIRmPmHumidifier2LinearRange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #2 linear range in tenths
of percent relative humidity per Kelvin (6520)"
::= { airIRmPmHumidifier2 21 }
airIRmPmHumidifier2Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 runtime in hours (6526)"
::= { airIRmPmHumidifier2 27 }
airIRmPmHumidifier2CurrentValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 current value in percent (6527)"
::= { airIRmPmHumidifier2 28 }
airIRmPmHumidifier2ManOpValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Humidifier #2 manual operation value in percent (6528)"
::= { airIRmPmHumidifier2 29 }
-- airIRmPmDehumidification
airIRmPmDehumidificManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Dehumidifier manual operation enable setting (6801)"
::= { airIRmPmDehumidification 2 }
airIRmPmDehumidificRunning OBJECT-TYPE
SYNTAX AirIRmControlState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Dehumidifier running state (6802)"
::= { airIRmPmDehumidification 3 }
airIRmPmDehumidificManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Dehumidifier manual operation running (6804)"
::= { airIRmPmDehumidification 5 }
airIRmPmDehumidificStartHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier start humidity in tenths of percent relative humidity (6809)"
::= { airIRmPmDehumidification 10 }
airIRmPmDehumidificHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier hysteresis in tenths of percent relative humidity (6811)"
::= { airIRmPmDehumidification 12 }
airIRmPmDehumidificMinWaterTemp OBJECT IDENTIFIER ::= { airIRmPmDehumidification 18 }
airIRmPmDehumidificMinWaterTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier minimum water temperature in tenths of
degrees Celsius (6817)"
::= { airIRmPmDehumidificMinWaterTemp 1 }
airIRmPmDehumidificMinWaterTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier minimum water temperature in tenths of
degrees Fahrenheit (6817)"
::= { airIRmPmDehumidificMinWaterTemp 2 }
airIRmPmDehumidificMaxWaterTemp OBJECT IDENTIFIER ::= { airIRmPmDehumidification 19 }
airIRmPmDehumidificMaxWaterTempC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier maximum water temperature in tenths of
degrees Celsius (6818)"
::= { airIRmPmDehumidificMaxWaterTemp 1 }
airIRmPmDehumidificMaxWaterTempF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier maximum water temperature in tenths of
degrees Fahrenheit (6818)"
::= { airIRmPmDehumidificMaxWaterTemp 2 }
airIRmPmDehumidificRuntime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dehumidifier runtime in hours (6820)"
::= { airIRmPmDehumidification 21 }
-- airIRmPmFan1
airIRmPmFan1ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation enable (6901)"
::= { airIRmPmFan1 2 }
airIRmPmFan1Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 running (6902)"
::= { airIRmPmFan1 3 }
airIRmPmFan1ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation running (6905)"
::= { airIRmPmFan1 6 }
airIRmPmFan1Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
proportional (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 type (6908)"
::= { airIRmPmFan1 9 }
airIRmPmFan1Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 runtime in hours (6931)"
::= { airIRmPmFan1 32 }
airIRmPmFan1Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 speed in percent (6932)"
::= { airIRmPmFan1 33 }
airIRmPmFan1ManOpSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation speed in percent (6933)"
::= { airIRmPmFan1 34 }
-- airIRmPmFan2
airIRmPmFan2ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation enable (7001)"
::= { airIRmPmFan2 2 }
airIRmPmFan2Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 running (7002)"
::= { airIRmPmFan2 3 }
airIRmPmFan2ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation running (7005)"
::= { airIRmPmFan2 6 }
airIRmPmFan2Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
proportional (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 2 type (7008)"
::= { airIRmPmFan2 9 }
airIRmPmFan2Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 runtime in hours (7031)"
::= { airIRmPmFan2 32 }
airIRmPmFan2Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 speed in percent (7032)"
::= { airIRmPmFan2 33 }
airIRmPmFan2ManOpSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation speed in percent (7033)"
::= { airIRmPmFan2 34 }
-- airIRmPmFan3
airIRmPmFan3ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation enable (7101)"
::= { airIRmPmFan3 2 }
airIRmPmFan3Running OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 running (7102)"
::= { airIRmPmFan3 3 }
airIRmPmFan3ManOpRunning OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation running (7105)"
::= { airIRmPmFan3 6 }
airIRmPmFan3Type OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
proportional (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 3 type (7108)"
::= { airIRmPmFan3 9 }
airIRmPmFan3Runtime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 runtime in hours (7131)"
::= { airIRmPmFan3 32 }
airIRmPmFan3Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 speed in percent (7132)"
::= { airIRmPmFan3 33 }
airIRmPmFan3ManOpSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan 1 manual operation speed in percent (7133)"
::= { airIRmPmFan3 34 }
-- airIRmPmLouver1
airIRmPmLouver1ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 1 manual operation enable (7201)"
::= { airIRmPmLouver1 2 }
airIRmPmLouver1Position OBJECT-TYPE
SYNTAX INTEGER {
closed (1),
open (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 1 position (7202)"
::= { airIRmPmLouver1 3 }
airIRmPmLouver1ManOpPosition OBJECT-TYPE
SYNTAX INTEGER {
closed (1),
open (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 1 manual operation position setting (7203)"
::= { airIRmPmLouver1 4 }
-- airIRmPmLouver2
airIRmPmLouver2ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 2 manual operation enable (7301)"
::= { airIRmPmLouver2 2 }
airIRmPmLouver2Position OBJECT-TYPE
SYNTAX INTEGER {
closed (1),
open (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 2 position (7302)"
::= { airIRmPmLouver2 3 }
airIRmPmLouver2ManOpPosition OBJECT-TYPE
SYNTAX INTEGER {
closed (1),
open (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 2 manual operation position setting (7303)"
::= { airIRmPmLouver2 4 }
-- airIRmPmLouver3
airIRmPmLouver3ManOpEnable OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 3 manual operation enable (7401)"
::= { airIRmPmLouver3 2 }
airIRmPmLouver3Position OBJECT-TYPE
SYNTAX INTEGER {
closed (1),
open (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 3 position (7402)"
::= { airIRmPmLouver3 3 }
airIRmPmLouver3ManOpPosition OBJECT-TYPE
SYNTAX INTEGER {
closed (1),
open (2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Louver 3 manual operation position setting (7403)"
::= { airIRmPmLouver3 4 }
-- airIRmPmAuxAlarm1
-- Empty
-- airIRmPmAuxAlarm2
-- Empty
-- airIRmPmAuxAlarm3
-- Empty
-- airIRmPmAuxAlarm4
-- Empty
-- airIRmPmAuxAlarm5
-- Empty
-- airIRmPmAlarmBits
airIRmPmFan1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan #1 failure (8500)."
::= { airIRmPmAlarmBits 1 }
airIRmPmFan2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan #2 failure (8501)."
::= { airIRmPmAlarmBits 2 }
airIRmPmFan3Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan #3 failure (8502)."
::= { airIRmPmAlarmBits 3 }
airIRmPmCompressor1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor #1 failure (8503)."
::= { airIRmPmAlarmBits 4 }
airIRmPmCompressor2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor #2 failure (8504)."
::= { airIRmPmAlarmBits 5 }
airIRmPmWaterDetector OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water detector alarm (8505)."
::= { airIRmPmAlarmBits 6 }
airIRmPmPhaseFailure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Phase failure (8506)."
::= { airIRmPmAlarmBits 7 }
airIRmPmFireSmokeDetector OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fire/smoke detector (8507)."
::= { airIRmPmAlarmBits 8 }
airIRmPmReturnAirTemperatureTooHigh OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air temperature too high (8508)."
::= { airIRmPmAlarmBits 9 }
airIRmPmReturnAirHumidityTooHigh OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air humidity too high (8509)."
::= { airIRmPmAlarmBits 10 }
airIRmPmSupplyAirTemperatureTooHigh OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air temperature too high (8510)."
::= { airIRmPmAlarmBits 11 }
airIRmPmSupplyAirHumidityTooHigh OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air humidity too high (8511)."
::= { airIRmPmAlarmBits 12 }
airIRmPmWaterTemperatureTooHigh OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water temperature too high (8512)."
::= { airIRmPmAlarmBits 13 }
airIRmPmReturnAirTemperatureTooLow OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air temperature too low (8513)."
::= { airIRmPmAlarmBits 14 }
airIRmPmReturnAirHumidityTooLow OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Return air humidity too low (8514)."
::= { airIRmPmAlarmBits 15 }
airIRmPmSupplyAirTemperatureTooLow OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air temperature too low (8515)."
::= { airIRmPmAlarmBits 16 }
airIRmPmSupplyAirHumidityTooLow OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supply air humidity too low (8516)."
::= { airIRmPmAlarmBits 17 }
airIRmPmWaterTemperatureTooLow OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Water temperature too low (8517)."
::= { airIRmPmAlarmBits 18 }
airIRmPmSensor1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #1 failure (8518)."
::= { airIRmPmAlarmBits 19 }
airIRmPmSensor2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #2 failure (8519)."
::= { airIRmPmAlarmBits 20 }
airIRmPmSensor3Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #3 failure (8520)."
::= { airIRmPmAlarmBits 21 }
airIRmPmSensor4Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #4 failure (8521)."
::= { airIRmPmAlarmBits 22 }
airIRmPmSensor5Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #5 failure (8522)."
::= { airIRmPmAlarmBits 23 }
airIRmPmSensor6Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #6 failure (8523)."
::= { airIRmPmAlarmBits 24 }
airIRmPmSensor7Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #7 failure (8524)."
::= { airIRmPmAlarmBits 25 }
airIRmPmSensor8Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #8 failure (8525)."
::= { airIRmPmAlarmBits 26 }
airIRmPmSensor9Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #9 failure (8526)."
::= { airIRmPmAlarmBits 27 }
airIRmPmSensor10Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #10 failure (8527)."
::= { airIRmPmAlarmBits 28 }
airIRmPmSensor11Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #11 failure (8528)."
::= { airIRmPmAlarmBits 29 }
airIRmPmSensor12Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #12 failure (8529)."
::= { airIRmPmAlarmBits 30 }
airIRmPmSensor13Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #13 failure (8530)."
::= { airIRmPmAlarmBits 31 }
airIRmPmSensor14Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #14 failure (8531)."
::= { airIRmPmAlarmBits 32 }
airIRmPmSensor15Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #15 failure (8532)."
::= { airIRmPmAlarmBits 33 }
airIRmPmSensor16Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #16 failure (8533)."
::= { airIRmPmAlarmBits 34 }
airIRmPmSensor17Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #17 failure (8534)."
::= { airIRmPmAlarmBits 35 }
airIRmPmSensor18Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #18 failure (8535)."
::= { airIRmPmAlarmBits 36 }
airIRmPmSensor19Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #19 failure (8536)."
::= { airIRmPmAlarmBits 37 }
airIRmPmSensor20Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #20 failure (8537)."
::= { airIRmPmAlarmBits 38 }
airIRmPmSensor21Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #21 failure (8538)."
::= { airIRmPmAlarmBits 39 }
airIRmPmSensor1Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #1 defect (8539)."
::= { airIRmPmAlarmBits 40 }
airIRmPmSensor2Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #2 defect (8540)."
::= { airIRmPmAlarmBits 41 }
airIRmPmSensor3Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #3 defect (8541)."
::= { airIRmPmAlarmBits 42 }
airIRmPmSensor4Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #4 defect (8542)."
::= { airIRmPmAlarmBits 43 }
airIRmPmSensor5Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #5 defect (8543)."
::= { airIRmPmAlarmBits 44 }
airIRmPmSensor6Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #6 defect (8544)."
::= { airIRmPmAlarmBits 45 }
airIRmPmSensor7Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #7 defect (8545)."
::= { airIRmPmAlarmBits 46 }
airIRmPmSensor8Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #8 defect (8546)."
::= { airIRmPmAlarmBits 47 }
airIRmPmSensor9Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #9 defect (8547)."
::= { airIRmPmAlarmBits 48 }
airIRmPmSensor10Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #10 defect (8548)."
::= { airIRmPmAlarmBits 49 }
airIRmPmSensor11Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #11 defect (8549)."
::= { airIRmPmAlarmBits 50 }
airIRmPmSensor12Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #12 defect (8550)."
::= { airIRmPmAlarmBits 51 }
airIRmPmSensor13Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #13 defect (8551)."
::= { airIRmPmAlarmBits 52 }
airIRmPmSensor14Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #14 defect (8552)."
::= { airIRmPmAlarmBits 53 }
airIRmPmSensor15Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #15 defect (8553)."
::= { airIRmPmAlarmBits 54 }
airIRmPmSensor16Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #16 defect (8554)."
::= { airIRmPmAlarmBits 55 }
airIRmPmSensor17Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #17 defect (8555)."
::= { airIRmPmAlarmBits 56 }
airIRmPmSensor18Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #18 defect (8556)"
::= { airIRmPmAlarmBits 57 }
airIRmPmSensor19Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #19 defect (8557)."
::= { airIRmPmAlarmBits 58 }
airIRmPmSensor20Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #20 defect (8558)."
::= { airIRmPmAlarmBits 59 }
airIRmPmSensor21Defect OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sensor #21 defect (8559)."
::= { airIRmPmAlarmBits 60 }
airIRmPmCompressor1Alarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor #1 alarm (8560)."
::= { airIRmPmAlarmBits 61 }
airIRmPmCompressor2Alarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor #2 alarm (8561)."
::= { airIRmPmAlarmBits 62 }
airIRmPmCompressor1LowPressure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor #1 low pressure (8562)."
::= { airIRmPmAlarmBits 63 }
airIRmPmCompressor2LowPressure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compressor #2 low pressure (8563)."
::= { airIRmPmAlarmBits 64 }
airIRmPmReheat1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reheat #1 failure (8564)."
::= { airIRmPmAlarmBits 65 }
airIRmPmReheat2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reheat #2 failure (8565)."
::= { airIRmPmAlarmBits 66 }
airIRmPmReheat3Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reheat #3 failure (8566)."
::= { airIRmPmAlarmBits 67 }
airIRmPmReheat4Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reheat #4 failure (8567)."
::= { airIRmPmAlarmBits 68 }
airIRmPmDrycooler1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler #1 failure (8568)."
::= { airIRmPmAlarmBits 69 }
airIRmPmDrycooler2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler #2 failure (8569)."
::= { airIRmPmAlarmBits 70 }
airIRmPmDrycooler3Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler #3 failure (8570)."
::= { airIRmPmAlarmBits 71 }
airIRmPmDrycooler4Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drycooler #4 failure (8571)."
::= { airIRmPmAlarmBits 72 }
airIRmPmPump1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump #1 failure (8572)."
::= { airIRmPmAlarmBits 73 }
airIRmPmPump2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump #2 failure (8573)."
::= { airIRmPmAlarmBits 74 }
airIRmPmPump3Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump #3 failure (8574)."
::= { airIRmPmAlarmBits 75 }
airIRmPmPump4Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pump #4 failure (8575)."
::= { airIRmPmAlarmBits 76 }
airIRmPmHumidifier1Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 failure (8576)."
::= { airIRmPmAlarmBits 77 }
airIRmPmHumidifier2Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 failure (8577)."
::= { airIRmPmAlarmBits 78 }
airIRmPmHumidifier3Failure OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #3 failure (8578)."
::= { airIRmPmAlarmBits 79 }
airIRmPmHumidifier1Alarm5us OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 5us alarm (8579)."
::= { airIRmPmAlarmBits 80 }
airIRmPmHumidifier2Alarm5us OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 5us alarm (8580)."
::= { airIRmPmAlarmBits 81 }
airIRmPmHumidifier3Alarm5us OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #3 5us alarm (8581)."
::= { airIRmPmAlarmBits 82 }
airIRmPmHumidifier1Alarm20us OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #1 20us alarm (8582)."
::= { airIRmPmAlarmBits 83 }
airIRmPmHumidifier2Alarm20us OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #2 20us alarm (8583)."
::= { airIRmPmAlarmBits 84 }
airIRmPmHumidifier3Alarm20us OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Humidifier #3 20us alarm (8584)."
::= { airIRmPmAlarmBits 85 }
airIRmPmFan1Alarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan #1 alarm (8585)."
::= { airIRmPmAlarmBits 86 }
airIRmPmFan2Alarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan #2 alarm (8586)."
::= { airIRmPmAlarmBits 87 }
airIRmPmFan3Alarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan #3 alarm (8587)."
::= { airIRmPmAlarmBits 88 }
airIRmPmFilter1Clogged OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Filter #1 clogged (8588)."
::= { airIRmPmAlarmBits 89 }
airIRmPmFilter2Clogged OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Filter #2 clogged (8589)."
::= { airIRmPmAlarmBits 90 }
airIRmPmFilter3Clogged OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Filter #3 clogged (8590)."
::= { airIRmPmAlarmBits 91 }
airIRmPmAuxiliaryAlarm1 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #1 alarm (8591)."
::= { airIRmPmAlarmBits 92 }
airIRmPmAuxiliaryAlarm2 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #2 alarm (8592)."
::= { airIRmPmAlarmBits 93 }
airIRmPmAuxiliaryAlarm3 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #3 alarm (8593)."
::= { airIRmPmAlarmBits 94 }
airIRmPmAuxiliaryAlarm4 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #4 alarm (8594)."
::= { airIRmPmAlarmBits 95 }
airIRmPmAuxiliaryAlarm5 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #5 alarm (8595)."
::= { airIRmPmAlarmBits 96 }
airIRmPmAuxiliaryAlarm6 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #6 alarm (8596)."
::= { airIRmPmAlarmBits 97 }
airIRmPmAuxiliaryAlarm7 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #7 alarm (8597)."
::= { airIRmPmAlarmBits 98 }
airIRmPmAuxiliaryAlarm8 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #8 alarm (8598)."
::= { airIRmPmAlarmBits 99 }
airIRmPmAuxiliaryAlarm9 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #9 alarm (8599)."
::= { airIRmPmAlarmBits 100 }
airIRmPmAuxiliaryAlarm10 OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Auxiliary #10 alarm (8600)."
::= { airIRmPmAlarmBits 101 }
airIRmPmHotGasHeatingAlarm OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hot gas heating alarm (8601)."
::= { airIRmPmAlarmBits 102 }
airIRmPmEEV1PressureSensorError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EEV1 pressure sensor error (8602)."
::= { airIRmPmAlarmBits 103 }
airIRmPmEEV1TemperatureSensorError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EEV1 temperature sensor error (8603)."
::= { airIRmPmAlarmBits 104 }
airIRmPmEEV1StepperMotorError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EEV1 stepper motor error (8604)."
::= { airIRmPmAlarmBits 105 }
airIRmPmEEV2PressureSensorError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EEV2 pressure sensor error (8605)."
::= { airIRmPmAlarmBits 106 }
airIRmPmEEV2TemperatureSensorError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EEV2 temperature sensor error (8606)."
::= { airIRmPmAlarmBits 107 }
airIRmPmEEV2StepperMotorError OBJECT-TYPE
SYNTAX AirIRmAlarmState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EEV2 stepper motor error (8607)."
::= { airIRmPmAlarmBits 108 }
-- airIRmPmMyZone
airIRmPmMyZoneNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone number (11700)."
::= { airIRmPmMyZone 1 }
airIRmPmMyZoneRoomTemperature OBJECT IDENTIFIER ::= { airIRmPmMyZone 2 }
airIRmPmMyZoneRoomTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone room temperature in tenths of degrees Celsius (11701)."
::= { airIRmPmMyZoneRoomTemperature 1 }
airIRmPmMyZoneRoomTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone room temperature in tenths of degrees Fahrenheit (11701)."
::= { airIRmPmMyZoneRoomTemperature 2 }
airIRmPmMyZoneRoomHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone room humidity in tenths of %RH (11702)."
::= { airIRmPmMyZone 3 }
airIRmPmMyZoneSupplyTemperature OBJECT IDENTIFIER ::= { airIRmPmMyZone 4 }
airIRmPmMyZoneSupplyTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone supply temperature in tenths of degrees Celsius (11703)."
::= { airIRmPmMyZoneSupplyTemperature 1 }
airIRmPmMyZoneSupplyTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone supply temperature in tenths
of degrees Fahrenheit (11703)."
::= { airIRmPmMyZoneSupplyTemperature 2 }
airIRmPmMyZoneSupplyHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone supply humidity in tenths of %RH (11704)."
::= { airIRmPmMyZone 5 }
airIRmPmMyZoneSequencingTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone sequencing time in minutes (11705)."
::= { airIRmPmMyZone 6 }
airIRmPmMyZoneNumberOfErrorUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of error units in my zone (11706)."
::= { airIRmPmMyZone 7 }
airIRmPmMyZoneEmergencyTemperature OBJECT IDENTIFIER ::= { airIRmPmMyZone 8 }
airIRmPmMyZoneEmergencyTemperatureC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone emergency temperature in tenths of degrees Celsius (11707)."
::= { airIRmPmMyZoneEmergencyTemperature 1 }
airIRmPmMyZoneEmergencyTemperatureF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone emergency temperature in tenths
of degrees Fahrenheit (11707)."
::= { airIRmPmMyZoneEmergencyTemperature 2 }
airIRmPmMyZoneCWEnergySaveMode OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"My zone CW energy save mode (11708)."
::= { airIRmPmMyZone 9 }
-- airIRmPmGlobalZoneData
airIRmPmGlobalZoneDataEmergencyOpMode OBJECT-TYPE
SYNTAX AirIRmActivityState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Emergency operation mode (11800)."
::= { airIRmPmGlobalZoneData 1 }
-- End of AC InRoom
-- Begining of airIRGen3
-- ******************************************************************
--airIRG3 Ident Group
-- ******************************************************************
airIRG3IdentTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ident table size."
::= { airIRG3Ident 1 }
AirIRG3IdentEntry ::= SEQUENCE {
airIRG3IdentIndex INTEGER,
airIRG3IdentName DisplayString,
airIRG3IdentLocation DisplayString,
airIRG3IdentModelNumber DisplayString,
airIRG3IdentSerialNumber DisplayString,
airIRG3IdentFirmwareRevision DisplayString,
airIRG3IdentHardwareRevision DisplayString,
airIRG3IdentManufactureDate DisplayString,
airIRG3IdentRDUSysOID OBJECT IDENTIFIER,
airIRG3IdentCMSysOID OBJECT IDENTIFIER,
airIRG3IdentGroupSysOID OBJECT IDENTIFIER
}
airIRG3IdentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3IdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to get ident information of current RDU and its assigned CM's."
::= { airIRG3Ident 2 }
airIRG3IdentEntry OBJECT-TYPE
SYNTAX AirIRG3IdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ident table entry."
INDEX { airIRG3IdentIndex}
::= { airIRG3IdentTable 1 }
airIRG3IdentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of ident table."
::= { airIRG3IdentEntry 1 }
airIRG3IdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the unit name."
::= { airIRG3IdentEntry 2 }
airIRG3IdentLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A character string identifying the unit location."
::= { airIRG3IdentEntry 3 }
airIRG3IdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit model number."
::= { airIRG3IdentEntry 4 }
airIRG3IdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit serial number."
::= { airIRG3IdentEntry 5 }
airIRG3IdentFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit firmware version."
::= { airIRG3IdentEntry 6 }
airIRG3IdentHardwareRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit controller hardware revision."
::= { airIRG3IdentEntry 7 }
airIRG3IdentManufactureDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the unit manufacture date."
::= { airIRG3IdentEntry 8 }
airIRG3IdentRDUSysOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID contains an OID path to the RDU data."
::= { airIRG3IdentEntry 9 }
airIRG3IdentCMSysOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID contains an OID path to the cooling module data."
::= { airIRG3IdentEntry 10 }
airIRG3IdentGroupSysOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID contains an OID path to the group data."
::= { airIRG3IdentEntry 11 }
-- ******************************************************************
-- airIRG3 Group Status
-- ******************************************************************
airIRG3GroupTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group table size."
::= { airIRG3Group 1 }
AirIRG3GroupStatusEntry ::= SEQUENCE {
airIRG3GroupStatusIndex INTEGER,
airIRG3GroupStatusCoolOutput INTEGER,
airIRG3GroupStatusCoolDemand INTEGER,
airIRG3GroupStatusAirFlowUS INTEGER,
airIRG3GroupStatusAirFlowMetric INTEGER,
airIRG3GroupStatusMaxRackInletTempUS INTEGER,
airIRG3GroupStatusMaxRackInletTempMetric INTEGER,
airIRG3GroupStatusMinRackInletTempUS INTEGER,
airIRG3GroupStatusMinRackInletTempMetric INTEGER,
airIRG3GroupStatusMaxReturnAirTempUS INTEGER,
airIRG3GroupStatusMaxReturnAirTempMetric INTEGER,
airIRG3GroupStatusMinReturnAirTempUS INTEGER,
airIRG3GroupStatusMinReturnAirTempMetric INTEGER,
airIRG3GroupStatusAvgSupplyTempUS INTEGER,
airIRG3GroupStatusAvgSupplyTempMetric INTEGER,
airIRG3GroupStatusAvgReturnTempUS INTEGER,
airIRG3GroupStatusAvgReturnTempMetric INTEGER,
airIRG3GroupStatusAvgFanSpeed INTEGER,
airIRG3GroupStatusAvgAirFlowUS INTEGER,
airIRG3GroupStatusAvgAirFlowMetric INTEGER,
airIRG3GroupStatusTotalAirFlowUS INTEGER,
airIRG3GroupStatusTotalAirFlowMetric INTEGER
}
airIRG3GroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3GroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to get group status information."
::= { airIRG3Group 2 }
airIRG3GroupStatusEntry OBJECT-TYPE
SYNTAX AirIRG3GroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group staus table entry."
INDEX { airIRG3GroupStatusIndex}
::= { airIRG3GroupStatusTable 1 }
airIRG3GroupStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of group status table."
::= { airIRG3GroupStatusEntry 1 }
airIRG3GroupStatusCoolOutput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group cooling output in tenths of kilowatts (kW).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 2 }
airIRG3GroupStatusCoolDemand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group cooling demand in tenths of kilowatts (kW).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 3 }
airIRG3GroupStatusAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group air flow in cubic feet per minute (CFM).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 4 }
airIRG3GroupStatusAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group air flow in liters per second (L/s).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 5 }
airIRG3GroupStatusMaxRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum rack inlet temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 6 }
airIRG3GroupStatusMaxRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum rack inlet temperature in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 7 }
airIRG3GroupStatusMinRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum rack inlet temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 8 }
airIRG3GroupStatusMinRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum rack inlet temperature in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 9 }
airIRG3GroupStatusMaxReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum return air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 10 }
airIRG3GroupStatusMaxReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group maximum return air temperature in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 11 }
airIRG3GroupStatusMinReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum return air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 12 }
airIRG3GroupStatusMinReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group minimum return air temperature in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 13 }
airIRG3GroupStatusAvgSupplyTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average supply air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 14 }
airIRG3GroupStatusAvgSupplyTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average supply air temperature in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 15 }
airIRG3GroupStatusAvgReturnTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average return air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 16 }
airIRG3GroupStatusAvgReturnTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average return air temperature in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 17 }
airIRG3GroupStatusAvgFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average fan speed in revolutions per minute (RPM).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 18 }
airIRG3GroupStatusAvgAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average air flow in cubic feet per minute (CFM).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 19 }
airIRG3GroupStatusAvgAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group average air flow in liters per second (L/s).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 20 }
airIRG3GroupStatusTotalAirFlowUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group total air flow in cubic feet per minute (CFM).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 21 }
airIRG3GroupStatusTotalAirFlowMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group total air flow in liters per second (L/s).
Returns (-1) if not supported."
::= { airIRG3GroupStatusEntry 22 }
-- ******************************************************************
--airIRG3 Group Setpoints
-- ******************************************************************
AirIRG3GroupSetpointsEntry ::= SEQUENCE {
airIRG3GroupSetpointsIndex INTEGER,
airIRG3GroupSetpointsCoolSetpointUS INTEGER,
airIRG3GroupSetpointsCoolSetpointMetric INTEGER,
airIRG3GroupSetpointsCoolDeadbandUS INTEGER,
airIRG3GroupSetpointsCoolDeadbandMetric INTEGER,
airIRG3GroupSetpointsFanSpeedPreference INTEGER,
airIRG3GroupSetpointsSupplyAirSetpointUS INTEGER,
airIRG3GroupSetpointsSupplyAirSetpointMetric INTEGER,
airIRG3GroupSetpointsAirFlowControl INTEGER,
airIRG3GroupSetpointsLightingOnTime INTEGER
}
airIRG3GroupSetpointsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3GroupSetpointsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access the group setpoints."
::= { airIRG3Group 3 }
airIRG3GroupSetpointsEntry OBJECT-TYPE
SYNTAX AirIRG3GroupSetpointsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group setpoints table entry."
INDEX { airIRG3GroupSetpointsIndex}
::= { airIRG3GroupSetpointsTable 1 }
airIRG3GroupSetpointsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of group setpoints table."
::= { airIRG3GroupSetpointsEntry 1 }
airIRG3GroupSetpointsCoolSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Fahrenheit."
::= { airIRG3GroupSetpointsEntry 2 }
airIRG3GroupSetpointsCoolSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling setpoint in tenths of
degrees Celsius."
::= { airIRG3GroupSetpointsEntry 3 }
airIRG3GroupSetpointsCoolDeadbandUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling deadband in tenths of
degrees Fahrenheit. Returns (-1) if not supported."
::= { airIRG3GroupSetpointsEntry 4 }
airIRG3GroupSetpointsCoolDeadbandMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group cooling deadband in tenths of
degrees Celsius. Returns (-1) if not supported."
::= { airIRG3GroupSetpointsEntry 5 }
airIRG3GroupSetpointsFanSpeedPreference OBJECT-TYPE
SYNTAX INTEGER {
low (1),
med-low (2),
med (3),
med-high (4),
high (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group preferred fan speed setting."
::= { airIRG3GroupSetpointsEntry 6 }
airIRG3GroupSetpointsSupplyAirSetpointUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Fahrenheit."
::= { airIRG3GroupSetpointsEntry 7 }
airIRG3GroupSetpointsSupplyAirSetpointMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group supply air setpoint in tenths of
degrees Celsius."
::= { airIRG3GroupSetpointsEntry 8 }
airIRG3GroupSetpointsAirFlowControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group air flow control."
::= { airIRG3GroupSetpointsEntry 9 }
airIRG3GroupSetpointsLightingOnTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group lighting on time in minutes."
::= { airIRG3GroupSetpointsEntry 10 }
-- ******************************************************************
--airIRG3 Group Config
-- ******************************************************************
AirIRG3GroupConfigEntry ::= SEQUENCE {
airIRG3GroupConfigIndex INTEGER,
airIRG3GroupConfigNumberofCoolingUnits INTEGER,
airIRG3GroupConfigConfigurationType INTEGER,
airIRG3GroupConfigCapacityControlType INTEGER,
airIRG3GroupConfigFanSpeedControl INTEGER,
airIRG3GroupConfigCoolGainP INTEGER,
airIRG3GroupConfigCoolResetRateI INTEGER,
airIRG3GroupConfigCoolDerivativeD INTEGER,
airIRG3GroupConfigCoolPIDReset INTEGER,
airIRG3GroupConfigNumberofBackupUnits INTEGER,
airIRG3GroupConfigRuntimeBalancingEnable INTEGER,
airIRG3GroupConfigLoadAssistEnable INTEGER
}
airIRG3GroupConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3GroupConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access group configuration table."
::= { airIRG3Group 4 }
airIRG3GroupConfigEntry OBJECT-TYPE
SYNTAX AirIRG3GroupConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group config table entry."
INDEX { airIRG3GroupConfigIndex}
::= { airIRG3GroupConfigTable 1 }
airIRG3GroupConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of group config table."
::= { airIRG3GroupConfigEntry 1 }
airIRG3GroupConfigNumberofCoolingUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of cooling units."
::= { airIRG3GroupConfigEntry 2 }
airIRG3GroupConfigConfigurationType OBJECT-TYPE
SYNTAX INTEGER {
racs (1),
spot (2),
in-row (3),
hacs (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group configuration type.
The spot configuration type is not supported.
Returns (-1) if not supported."
::= { airIRG3GroupConfigEntry 3 }
airIRG3GroupConfigCapacityControlType OBJECT-TYPE
SYNTAX INTEGER {
discrete (1),
proportional (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group capacity control. Returns (-1) if not supported."
::= { airIRG3GroupConfigEntry 4 }
airIRG3GroupConfigFanSpeedControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The group fan speed control."
::= { airIRG3GroupConfigEntry 5 }
airIRG3GroupConfigCoolGainP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gain component of the PID in hundredths."
::= { airIRG3GroupConfigEntry 6 }
airIRG3GroupConfigCoolResetRateI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The integral component of the PID in hundredths."
::= { airIRG3GroupConfigEntry 7 }
airIRG3GroupConfigCoolDerivativeD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The derivative component of the PID in hundredths."
::= { airIRG3GroupConfigEntry 8 }
airIRG3GroupConfigCoolPIDReset OBJECT-TYPE
SYNTAX INTEGER {
readBack (1),
reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Will reset the PID coefficients back to the factory defaults.
Readback is not supported, returns -1."
::= { airIRG3GroupConfigEntry 9 }
airIRG3GroupConfigNumberofBackupUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of backup units."
::= { airIRG3GroupConfigEntry 10 }
airIRG3GroupConfigRuntimeBalancingEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable runtime balancing feature."
::= { airIRG3GroupConfigEntry 11 }
airIRG3GroupConfigLoadAssistEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable load assist feature."
::= { airIRG3GroupConfigEntry 12 }
-- ***************************************
-- airIRG3 Alarm Status
-- ***************************************
airIRG3AlarmsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active alarms in the airIRG3AlarmsTable."
::= { airIRG3Alarms 1 }
AirIRG3AlarmsEntry ::= SEQUENCE {
airIRG3AlarmsIndex INTEGER,
airIRG3AlarmsEventCode INTEGER,
airIRG3AlarmsDescription DisplayString
}
airIRG3AlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3AlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of active alarms for the device."
::= { airIRG3Alarms 2 }
airIRG3AlarmsEntry OBJECT-TYPE
SYNTAX AirIRG3AlarmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Alarms specification"
INDEX { airIRG3AlarmsIndex }
::= { airIRG3AlarmsTable 1 }
airIRG3AlarmsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm index."
::= { airIRG3AlarmsEntry 1 }
airIRG3AlarmsEventCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Event Code for the alarm. Returns (-1) if not supported."
::= { airIRG3AlarmsEntry 2 }
airIRG3AlarmsDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of the alarm. Returns (-1) if not supported."
::= { airIRG3AlarmsEntry 3 }
-- ***************************************
-- airIRG3 RDU Status
-- ***************************************
airIRG3RDUTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU table size."
::= { airIRG3RDU 1 }
AirIRG3RDUStatusEntry ::= SEQUENCE {
airIRG3RDUStatusDeviceIndex INTEGER,
airIRG3RDUID DisplayString,
airIRG3RDUStatusOnReadyStandby INTEGER,
airIRG3RDUStatusOperatingMode INTEGER,
airIRG3RDUStatusLeadPump INTEGER,
airIRG3RDUStatusStartupDelay INTEGER,
airIRG3RDUStatusPumpChangeOverInterval INTEGER,
airIRG3RDUStatusStopOnLeakDetect INTEGER,
airIRG3RDUStatusPowerSource INTEGER,
airIRG3RDUStatusTotalRDUOutputPower INTEGER,
airIRG3RDUStatusInletWaterTempUS INTEGER,
airIRG3RDUStatusInletWaterTempMetric INTEGER,
airIRG3RDUStatusOutletWaterTempUS INTEGER,
airIRG3RDUStatusOutletWaterTempMetric INTEGER,
airIRG3RDUStatusCondenserSaturationTempUS INTEGER,
airIRG3RDUStatusCondenserSaturationTempMetric INTEGER,
airIRG3RDUStatusDewPointTempUS INTEGER,
airIRG3RDUStatusDewPointTempMetric INTEGER,
airIRG3RDUStatusPumpOutletTempUS INTEGER,
airIRG3RDUStatusPumpOutletTempMetric INTEGER,
airIRG3RDUStatusSubcoolerOutletTempUS INTEGER,
airIRG3RDUStatusSubcoolerOutletTempMetric INTEGER,
airIRG3RDUStatusCondenserOutletTempUS INTEGER,
airIRG3RDUStatusCondenserOutletTempMetric INTEGER,
airIRG3RDUStatusCondenserInletTempUS INTEGER,
airIRG3RDUStatusCondenserInletTempMetric INTEGER,
airIRG3RDUStatusCondenserOutletPressureUS INTEGER,
airIRG3RDUStatusCondenserOutletPressureMetric INTEGER,
airIRG3RDUStatusPump1HeadPressureUS INTEGER,
airIRG3RDUStatusPump1HeadPressureMetric INTEGER,
airIRG3RDUStatusPump2HeadPressureUS INTEGER,
airIRG3RDUStatusPump2HeadPressureMetric INTEGER,
airIRG3RDUStatusPump1Speed INTEGER,
airIRG3RDUStatusPump2Speed INTEGER,
airIRG3RDUStatusCWValvePosition INTEGER,
airIRG3RDUStatusReceiverLiquidLevel INTEGER,
airIRG3RDUStatusDCPowerSupply1Current INTEGER,
airIRG3RDUStatusDCPowerSupply2Current INTEGER,
airIRG3RDUStatusTotalDCPowerSupplyCurrent INTEGER,
airIRG3RDUStatusInputState INTEGER,
airIRG3RDUStatusOutputState INTEGER,
airIRG3RDUStatusByPassValvePosition INTEGER,
airIRG3RDUStatusRefrigerantLeakDetector INTEGER
}
airIRG3RDUStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3RDUStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access RDU status table."
::= { airIRG3RDU 2 }
airIRG3RDUStatusEntry OBJECT-TYPE
SYNTAX AirIRG3RDUStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The RDU status table entry."
INDEX { airIRG3RDUStatusDeviceIndex}
::= { airIRG3RDUStatusTable 1 }
airIRG3RDUStatusDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of RDU status table."
::= { airIRG3RDUStatusEntry 1 }
airIRG3RDUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. "
::= { airIRG3RDUStatusEntry 2 }
airIRG3RDUStatusOnReadyStandby OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
ready (2),
on (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU current status."
::= { airIRG3RDUStatusEntry 3 }
airIRG3RDUStatusOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
ready (2),
on (3),
stop (4),
maintenancemode (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU actual operating mode."
::= { airIRG3RDUStatusEntry 4 }
airIRG3RDUStatusLeadPump OBJECT-TYPE
SYNTAX INTEGER {
pump1 (1),
pump2 (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU lead pump."
::= { airIRG3RDUStatusEntry 5 }
airIRG3RDUStatusStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU start up delay in seconds."
::= { airIRG3RDUStatusEntry 6 }
airIRG3RDUStatusPumpChangeOverInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU pump change over interval in days."
::= { airIRG3RDUStatusEntry 7 }
airIRG3RDUStatusStopOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU status of stop on leak detect."
::= { airIRG3RDUStatusEntry 8 }
airIRG3RDUStatusPowerSource OBJECT-TYPE
SYNTAX INTEGER {
singleFeed (1),
dualFeed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU power source status."
::= { airIRG3RDUStatusEntry 9 }
airIRG3RDUStatusTotalRDUOutputPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU output power in tenths of kilowatts (kW)."
::= { airIRG3RDUStatusEntry 10 }
airIRG3RDUStatusInletWaterTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU inlet water temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 11 }
airIRG3RDUStatusInletWaterTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU inlet water temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 12 }
airIRG3RDUStatusOutletWaterTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU outlet water temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 13 }
airIRG3RDUStatusOutletWaterTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU outlet water temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 14 }
airIRG3RDUStatusCondenserSaturationTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser saturation temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 15 }
airIRG3RDUStatusCondenserSaturationTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser saturation temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 16 }
airIRG3RDUStatusDewPointTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU dew point temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 17 }
airIRG3RDUStatusDewPointTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU dew point temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 18 }
airIRG3RDUStatusPumpOutletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU pump outlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 19 }
airIRG3RDUStatusPumpOutletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU pump outlet temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 20 }
airIRG3RDUStatusSubcoolerOutletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU sub cooler outlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 21 }
airIRG3RDUStatusSubcoolerOutletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU sub cooler outlet temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 22 }
airIRG3RDUStatusCondenserOutletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser outlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 23 }
airIRG3RDUStatusCondenserOutletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser outlet temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 24 }
airIRG3RDUStatusCondenserInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUStatusEntry 25 }
airIRG3RDUStatusCondenserInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser inlet temperature in tenths of
degrees Celsius."
::= { airIRG3RDUStatusEntry 26 }
airIRG3RDUStatusCondenserOutletPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser outlet pressure in
pounds per square inch (PSI)."
::= { airIRG3RDUStatusEntry 27 }
airIRG3RDUStatusCondenserOutletPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU condenser outlet pressure in kiloPascals (KPa)."
::= { airIRG3RDUStatusEntry 28 }
airIRG3RDUStatusPump1HeadPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Pump 1 head pressure in pounds per square inch (PSI)."
::= { airIRG3RDUStatusEntry 29 }
airIRG3RDUStatusPump1HeadPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Pump 1 head pressure in kiloPascals (KPa)."
::= { airIRG3RDUStatusEntry 30 }
airIRG3RDUStatusPump2HeadPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Pump 2 head pressure in pounds per square inch (PSI)."
::= { airIRG3RDUStatusEntry 31 }
airIRG3RDUStatusPump2HeadPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Pump 2 head pressure in kiloPascals (KPa)."
::= { airIRG3RDUStatusEntry 32 }
airIRG3RDUStatusPump1Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Pump 1 speed in revolutions per minute (RPM)."
::= { airIRG3RDUStatusEntry 33 }
airIRG3RDUStatusPump2Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Pump 2 speed in revolutions per minute (RPM)."
::= { airIRG3RDUStatusEntry 34 }
airIRG3RDUStatusCWValvePosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU CW Valve position in % open"
::= { airIRG3RDUStatusEntry 35 }
airIRG3RDUStatusReceiverLiquidLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU receiver liquid level in % Full"
::= { airIRG3RDUStatusEntry 36 }
airIRG3RDUStatusDCPowerSupply1Current OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU DC Power Supply 1 Current in Amps"
::= { airIRG3RDUStatusEntry 37 }
airIRG3RDUStatusDCPowerSupply2Current OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU DC Power Supply 2 Current in Amps"
::= { airIRG3RDUStatusEntry 38 }
airIRG3RDUStatusTotalDCPowerSupplyCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Total DC Power Supply Current in Amps"
::= { airIRG3RDUStatusEntry 39 }
airIRG3RDUStatusInputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Input state."
::= { airIRG3RDUStatusEntry 40 }
airIRG3RDUStatusOutputState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU Output state"
::= { airIRG3RDUStatusEntry 41 }
airIRG3RDUStatusByPassValvePosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU By Pass Valve position in % open"
::= { airIRG3RDUStatusEntry 42 }
airIRG3RDUStatusRefrigerantLeakDetector OBJECT-TYPE
SYNTAX INTEGER {
suspended (1),
calibrating (2),
operating (3),
disabled (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU refrigerant leak detector status."
::= { airIRG3RDUStatusEntry 43 }
-- ***************************************
-- airIRG3 RDU Run Hours
-- ***************************************
AirIRG3RDURunHoursEntry ::= SEQUENCE {
airIRG3RDURunHoursDeviceIndex INTEGER,
airIRG3RDURunHoursRDUID DisplayString,
airIRG3RDURunHoursPump1 INTEGER,
airIRG3RDURunHoursPump2 INTEGER,
airIRG3RDURunHoursPowerSupply1 INTEGER,
airIRG3RDURunHoursPowerSupply2 INTEGER
}
airIRG3RDURunHoursTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3RDURunHoursEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access RDU run hours table."
::= { airIRG3RDU 3 }
airIRG3RDURunHoursEntry OBJECT-TYPE
SYNTAX AirIRG3RDURunHoursEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The RDU run hours table entry."
INDEX { airIRG3RDURunHoursDeviceIndex}
::= { airIRG3RDURunHoursTable 1 }
airIRG3RDURunHoursDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of RDU run hours table."
::= { airIRG3RDURunHoursEntry 1 }
airIRG3RDURunHoursRDUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. "
::= { airIRG3RDURunHoursEntry 2 }
airIRG3RDURunHoursPump1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU run hours of Pump 1."
::= { airIRG3RDURunHoursEntry 3 }
airIRG3RDURunHoursPump2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU run hours of Pump 2."
::= { airIRG3RDURunHoursEntry 4 }
airIRG3RDURunHoursPowerSupply1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU run hours of power supply 1."
::= { airIRG3RDURunHoursEntry 5 }
airIRG3RDURunHoursPowerSupply2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RDU run hours of power supply 2."
::= { airIRG3RDURunHoursEntry 6 }
-- ***************************************
-- airIRG3 RDU Service Intervals
-- ***************************************
AirIRG3RDUServiceIntervalsEntry ::= SEQUENCE {
airIRG3RDUServiceIntervalsDeviceIndex INTEGER,
airIRG3RDUServiceIntervalsRDUID DisplayString,
airIRG3RDUServiceIntervalsAirFilterInterval INTEGER,
airIRG3RDUServiceIntervalsAirFilterAlarm INTEGER
}
airIRG3RDUServiceIntervalsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3RDUServiceIntervalsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access RDU service intervals table."
::= { airIRG3RDU 4 }
airIRG3RDUServiceIntervalsEntry OBJECT-TYPE
SYNTAX AirIRG3RDUServiceIntervalsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The service interval table entry."
INDEX { airIRG3RDUServiceIntervalsDeviceIndex}
::= { airIRG3RDUServiceIntervalsTable 1 }
airIRG3RDUServiceIntervalsDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of service interval table."
::= { airIRG3RDUServiceIntervalsEntry 1 }
airIRG3RDUServiceIntervalsRDUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. "
::= { airIRG3RDUServiceIntervalsEntry 2 }
airIRG3RDUServiceIntervalsAirFilterInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU service interval for air filter in hours.
Returns -1 if not supported."
::= { airIRG3RDUServiceIntervalsEntry 3 }
airIRG3RDUServiceIntervalsAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU service interval air filter alarm status.
Returns -1 if not supported."
::= { airIRG3RDUServiceIntervalsEntry 4 }
-- *******************************************
-- airIRG3 RDU Thresholds
-- Currently there are no thresholds for RDU
-- *******************************************
AirIRG3RDUThresholdsEntry ::= SEQUENCE {
airIRG3RDUThresholdsDeviceIndex INTEGER,
airIRG3RDUThresholdsRDUID DisplayString,
airIRG3RDUThresholdsEnteringFluidTempHighUS INTEGER,
airIRG3RDUThresholdsEnteringFluidTempHighMetric INTEGER
}
airIRG3RDUThresholdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3RDUThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access RDU thresholds table."
::= { airIRG3RDU 5 }
airIRG3RDUThresholdsEntry OBJECT-TYPE
SYNTAX AirIRG3RDUThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The RDU thresholds table entry."
INDEX { airIRG3RDUThresholdsDeviceIndex}
::= { airIRG3RDUThresholdsTable 1 }
airIRG3RDUThresholdsDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of RDU thresholds table."
::= { airIRG3RDUThresholdsEntry 1 }
airIRG3RDUThresholdsRDUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. "
::= { airIRG3RDUThresholdsEntry 2 }
airIRG3RDUThresholdsEnteringFluidTempHighUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU threshold for entering fluid temperature in tenths of
degrees Fahrenheit."
::= { airIRG3RDUThresholdsEntry 3 }
airIRG3RDUThresholdsEnteringFluidTempHighMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU threshold for entering fluid temperature in tenths of
degrees Celsius."
::= { airIRG3RDUThresholdsEntry 4 }
-- ***************************************
-- airIRG3 RDU Setpoints
-- ***************************************
AirIRG3RDUSetpointsEntry ::= SEQUENCE {
airIRG3RDUSetpointsDeviceIndex INTEGER
}
airIRG3RDUSetpointsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3RDUSetpointsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access RDU set points table."
::= { airIRG3RDU 6 }
airIRG3RDUSetpointsEntry OBJECT-TYPE
SYNTAX AirIRG3RDUSetpointsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The RDU set points table entry."
INDEX { airIRG3RDUSetpointsDeviceIndex}
::= { airIRG3RDUSetpointsTable 1 }
airIRG3RDUSetpointsDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of RDU set points table."
::= { airIRG3RDUSetpointsEntry 1 }
-- ***************************************
-- airIRG3 RDU Config
-- ***************************************
AirIRG3RDUConfigEntry ::= SEQUENCE {
airIRG3RDUConfigDeviceIndex INTEGER,
airIRG3RDUConfigRDUID DisplayString,
airIRG3RDUConfigStopOnLeakDetect INTEGER,
airIRG3RDUConfigStartupDelay INTEGER,
airIRG3RDUConfigPumpChangeOverInterval INTEGER,
airIRG3RDUConfigPowerSource INTEGER,
airIRG3RDUConfigOutputSource INTEGER,
airIRG3RDUConfigInputNormalState INTEGER,
airIRG3RDUConfigOutputNormalState INTEGER,
airIRG3RDUConfigByPassValveEnabled INTEGER,
airIRG3RDUConfigRefrigerantLeakDetectorEnabled INTEGER,
airIRG3RDUConfigCalibrateRefrigerantLeakDetector INTEGER,
airIRG3RDUConfigOnReadyStandby INTEGER
}
airIRG3RDUConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3RDUConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access RDU configuration table."
::= { airIRG3RDU 7 }
airIRG3RDUConfigEntry OBJECT-TYPE
SYNTAX AirIRG3RDUConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The RDU configuration table entry."
INDEX { airIRG3RDUConfigDeviceIndex}
::= { airIRG3RDUConfigTable 1 }
airIRG3RDUConfigDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of RDU configuration table."
::= { airIRG3RDUConfigEntry 1 }
airIRG3RDUConfigRDUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. "
::= { airIRG3RDUConfigEntry 2 }
airIRG3RDUConfigStopOnLeakDetect OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU stop on leak detect set."
::= { airIRG3RDUConfigEntry 3 }
airIRG3RDUConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU start up delay in seconds."
::= { airIRG3RDUConfigEntry 4 }
airIRG3RDUConfigPumpChangeOverInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU pump change over interval in days."
::= { airIRG3RDUConfigEntry 5 }
airIRG3RDUConfigPowerSource OBJECT-TYPE
SYNTAX INTEGER {
singleFeed (1),
dualFeed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU power source."
::= { airIRG3RDUConfigEntry 6 }
airIRG3RDUConfigOutputSource OBJECT-TYPE
SYNTAX INTEGER {
anyalarm (1),
onlycriticalalarms (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU output source."
::= { airIRG3RDUConfigEntry 7 }
airIRG3RDUConfigInputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU Input Normal State."
::= { airIRG3RDUConfigEntry 8 }
airIRG3RDUConfigOutputNormalState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU Output Normal State."
::= { airIRG3RDUConfigEntry 9 }
airIRG3RDUConfigByPassValveEnabled OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU By Pass Valve Enabled State."
::= { airIRG3RDUConfigEntry 10 }
airIRG3RDUConfigRefrigerantLeakDetectorEnabled OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RDU Refrigerant Leak Detector Enabled State."
::= { airIRG3RDUConfigEntry 11 }
airIRG3RDUConfigCalibrateRefrigerantLeakDetector OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows to calibrate the RDU Refrigerant Leak Detector and is write only.
The read returns -1. Only 'yes' is supported."
::= { airIRG3RDUConfigEntry 12 }
airIRG3RDUConfigOnReadyStandby OBJECT-TYPE
SYNTAX INTEGER {
standby (1),
ready (2),
on (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows to configure RDU on/standby parameter.
Ready is currently not supported. If unsupported returns -1. "
::= { airIRG3RDUConfigEntry 13 }
-- ***************************************
-- airIRG3 CMStatus
-- ***************************************
airIRG3CMTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling module table size."
::= { airIRG3CM 1 }
AirIRG3CMStatusEntry ::= SEQUENCE {
airIRG3CMStatusDeviceIndex INTEGER,
airIRG3CMStatusCMID DisplayString,
airIRG3CMStatusOperatingMode INTEGER,
airIRG3CMStatusUnitType INTEGER,
airIRG3CMStatusRackInletTempUS INTEGER,
airIRG3CMStatusRackInletTempMetric INTEGER,
airIRG3CMStatusReturnAirTempUS INTEGER,
airIRG3CMStatusReturnAirTempMetric INTEGER,
airIRG3CMStatusLiquidTempUS INTEGER,
airIRG3CMStatusLiquidTempMetric INTEGER,
airIRG3CMStatusVaporTempUS INTEGER,
airIRG3CMStatusVaporTempMetric INTEGER,
airIRG3CMStatusEvaporatorTempUS INTEGER,
airIRG3CMStatusEvaporatorTempMetric INTEGER,
airIRG3CMStatusLiquidInletPressureUS INTEGER,
airIRG3CMStatusLiquidInletPressureMetric INTEGER,
airIRG3CMStatusVaporOutletPressureUS INTEGER,
airIRG3CMStatusVaporOutletPressureMetric INTEGER,
airIRG3CMStatusExpansionValvePosition INTEGER,
airIRG3CMStatusEPRValvePosition INTEGER,
airIRG3CMStatusLocalDisplayOnOffEnabled INTEGER,
airIRG3CMStatusAverageFanSpeed INTEGER
}
airIRG3CMStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3CMStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access CM status table."
::= { airIRG3CM 2 }
airIRG3CMStatusEntry OBJECT-TYPE
SYNTAX AirIRG3CMStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CM status table entry."
INDEX { airIRG3CMStatusDeviceIndex}
::= { airIRG3CMStatusTable 1 }
airIRG3CMStatusDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of CM status table."
::= { airIRG3CMStatusEntry 1 }
airIRG3CMStatusCMID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM ID (RDU Number - Group Number - CM Unit Number)."
::= { airIRG3CMStatusEntry 2 }
airIRG3CMStatusOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
standBy (1),
on (2),
idle (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operating mode of the CM."
::= { airIRG3CMStatusEntry 3 }
airIRG3CMStatusUnitType OBJECT-TYPE
SYNTAX INTEGER{
unconfigured (1),
oa (2),
ra (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current CM unit type."
::= { airIRG3CMStatusEntry 4 }
airIRG3CMStatusRackInletTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMStatusEntry 5 }
airIRG3CMStatusRackInletTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM rack inlet temperature in tenths of
degrees Celsius."
::= { airIRG3CMStatusEntry 6 }
airIRG3CMStatusReturnAirTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM return air temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMStatusEntry 7 }
airIRG3CMStatusReturnAirTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM return air temperature in tenths of
degrees Celsius."
::= { airIRG3CMStatusEntry 8 }
airIRG3CMStatusLiquidTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM liquid temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMStatusEntry 9 }
airIRG3CMStatusLiquidTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM liquid temperature in tenths of
degrees Celsius."
::= { airIRG3CMStatusEntry 10 }
airIRG3CMStatusVaporTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM vapor temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMStatusEntry 11 }
airIRG3CMStatusVaporTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM vapor temperature in tenths of
degrees Celsius."
::= { airIRG3CMStatusEntry 12 }
airIRG3CMStatusEvaporatorTempUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM saturation temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMStatusEntry 13 }
airIRG3CMStatusEvaporatorTempMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM saturation temperature in tenths of
degrees Celsius."
::= { airIRG3CMStatusEntry 14 }
airIRG3CMStatusLiquidInletPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM Liquid Inlet pressure in pounds per square inch (PSI)."
::= { airIRG3CMStatusEntry 15 }
airIRG3CMStatusLiquidInletPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM Liquid Inlet pressure in kiloPascals (kPa)."
::= { airIRG3CMStatusEntry 16 }
airIRG3CMStatusVaporOutletPressureUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM Vapor Outlet pressure in pounds per square inch (PSI)."
::= { airIRG3CMStatusEntry 17 }
airIRG3CMStatusVaporOutletPressureMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM Vapor Outlet pressure in kiloPascals (kPa)."
::= { airIRG3CMStatusEntry 18 }
airIRG3CMStatusExpansionValvePosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM expansion valve position in % open"
::= { airIRG3CMStatusEntry 19 }
airIRG3CMStatusEPRValvePosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM Evaporator Pressure Regulator Valve Position
in tenths of percent open"
::= { airIRG3CMStatusEntry 20 }
airIRG3CMStatusLocalDisplayOnOffEnabled OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the on/off control on the CM local display."
::= { airIRG3CMStatusEntry 21 }
airIRG3CMStatusAverageFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM Average Fan Speed."
::= { airIRG3CMStatusEntry 22 }
-- ***************************************
-- airIRG3 CM Run Hours
-- ***************************************
AirIRG3CMRunHoursEntry ::= SEQUENCE {
airIRG3CMRunHoursDeviceIndex INTEGER,
airIRG3CMRunHoursCMID DisplayString,
airIRG3CMRunHoursFan1 INTEGER,
airIRG3CMRunHoursFan2 INTEGER,
airIRG3CMRunHoursFan3 INTEGER,
airIRG3CMRunHoursFan4 INTEGER,
airIRG3CMRunHoursFan5 INTEGER,
airIRG3CMRunHoursAirFilter INTEGER
}
airIRG3CMRunHoursTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3CMRunHoursEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access CM run hours table."
::= { airIRG3CM 3 }
airIRG3CMRunHoursEntry OBJECT-TYPE
SYNTAX AirIRG3CMRunHoursEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CM run hours table entry."
INDEX { airIRG3CMRunHoursDeviceIndex}
::= { airIRG3CMRunHoursTable 1 }
airIRG3CMRunHoursDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of CM run hours table."
::= { airIRG3CMRunHoursEntry 1 }
airIRG3CMRunHoursCMID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM ID (RDU Number - Group Number - CM Unit Number)."
::= { airIRG3CMRunHoursEntry 2 }
airIRG3CMRunHoursFan1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM run hours for Fan1.
Returns (-1) if not appilcable."
::= { airIRG3CMRunHoursEntry 3 }
airIRG3CMRunHoursFan2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM run hours for Fan2.
Returns (-1) if not appilcable."
::= { airIRG3CMRunHoursEntry 4 }
airIRG3CMRunHoursFan3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM run hours for Fan3.
Returns (-1) if not appilcable."
::= { airIRG3CMRunHoursEntry 5 }
airIRG3CMRunHoursFan4 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM run hours for Fan4.
Returns (-1) if not appilcable."
::= { airIRG3CMRunHoursEntry 6 }
airIRG3CMRunHoursFan5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM run hours for Fan5.
Returns (-1) if not appilcable."
::= { airIRG3CMRunHoursEntry 7 }
airIRG3CMRunHoursAirFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM run hours for air filter."
::= { airIRG3CMRunHoursEntry 8 }
-- ***************************************
-- airIRG3 CM Service Intervals
-- ***************************************
AirIRG3CMServiceIntervalsEntry ::= SEQUENCE {
airIRG3CMServiceIntervalsDeviceIndex INTEGER,
airIRG3CMServiceIntervalsCMID DisplayString,
airIRG3CMServiceIntervalsAirFilterInterval INTEGER,
airIRG3CMServiceIntervalsAirFilterAlarm INTEGER
}
airIRG3CMServiceIntervalsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3CMServiceIntervalsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access CM service intervals table."
::= { airIRG3CM 4 }
airIRG3CMServiceIntervalsEntry OBJECT-TYPE
SYNTAX AirIRG3CMServiceIntervalsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CM service interval table entry."
INDEX { airIRG3CMServiceIntervalsDeviceIndex}
::= { airIRG3CMServiceIntervalsTable 1 }
airIRG3CMServiceIntervalsDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of CM service intervals table."
::= { airIRG3CMServiceIntervalsEntry 1 }
airIRG3CMServiceIntervalsCMID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM ID (RDU Number - Group Number - CM Unit Number)."
::= { airIRG3CMServiceIntervalsEntry 2 }
airIRG3CMServiceIntervalsAirFilterInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM service interval for air filter in weeks.
Supported only for RA. Returns -1 if not supported."
::= { airIRG3CMServiceIntervalsEntry 3 }
airIRG3CMServiceIntervalsAirFilterAlarm OBJECT-TYPE
SYNTAX INTEGER{
disable (1),
enable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM service interval air filter alarm status.
Supported only for RA. Returns -1 if not supported."
::= { airIRG3CMServiceIntervalsEntry 4 }
-- ***************************************
-- airIRG3 CM Thresholds
-- ***************************************
AirIRG3CMThresholdsEntry ::= SEQUENCE {
airIRG3CMThresholdsDeviceIndex INTEGER,
airIRG3CMThresholdsCMID DisplayString,
airIRG3CMThresholdsRackInletTempHighUS INTEGER,
airIRG3CMThresholdsRackInletTempHighMetric INTEGER,
airIRG3CMThresholdsSupplyAirTempHighUS INTEGER,
airIRG3CMThresholdsSupplyAirTempHighMetric INTEGER,
airIRG3CMThresholdsReturnAirTempHighUS INTEGER,
airIRG3CMThresholdsReturnAirTempHighMetric INTEGER
}
airIRG3CMThresholdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3CMThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access CM thresholds table."
::= { airIRG3CM 5 }
airIRG3CMThresholdsEntry OBJECT-TYPE
SYNTAX AirIRG3CMThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CM thresholds table entry."
INDEX { airIRG3CMThresholdsDeviceIndex}
::= { airIRG3CMThresholdsTable 1 }
airIRG3CMThresholdsDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for CM thresholds table."
::= { airIRG3CMThresholdsEntry 1 }
airIRG3CMThresholdsCMID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM ID (RDU Number - Group Number - CM Unit Number)."
::= { airIRG3CMThresholdsEntry 2 }
airIRG3CMThresholdsRackInletTempHighUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM high threshold for rack inlet temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMThresholdsEntry 3 }
airIRG3CMThresholdsRackInletTempHighMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM high threshold for rack inlet temperature in tenths of
degrees Celsius."
::= { airIRG3CMThresholdsEntry 4 }
airIRG3CMThresholdsSupplyAirTempHighUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM high threshold for supply air temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMThresholdsEntry 5 }
airIRG3CMThresholdsSupplyAirTempHighMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM high threshold for supply air temperature in tenths of
degrees Celsius."
::= { airIRG3CMThresholdsEntry 6 }
airIRG3CMThresholdsReturnAirTempHighUS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM high threshold for return air temperature in tenths of
degrees Fahrenheit."
::= { airIRG3CMThresholdsEntry 7 }
airIRG3CMThresholdsReturnAirTempHighMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM high threshold for return air temperature in tenths of
degrees Celsius."
::= { airIRG3CMThresholdsEntry 8 }
-- ***************************************
-- airIRG3 CM Setpoints
-- ***************************************
AirIRG3CMSetpointsEntry ::= SEQUENCE {
airIRG3CMSetpointsDeviceIndex INTEGER
}
airIRG3CMSetpointsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3CMSetpointsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access CM set points table."
::= { airIRG3CM 6 }
airIRG3CMSetpointsEntry OBJECT-TYPE
SYNTAX AirIRG3CMSetpointsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CM set points table entry."
INDEX { airIRG3CMSetpointsDeviceIndex}
::= { airIRG3CMSetpointsTable 1 }
airIRG3CMSetpointsDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of CM set points table."
::= { airIRG3CMSetpointsEntry 1 }
-- ***************************************
-- airIRG3 CM Config
-- ***************************************
AirIRG3CMConfigEntry ::= SEQUENCE {
airIRG3CMConfigDeviceIndex INTEGER,
airIRG3CMConfigCMID DisplayString,
airIRG3CMConfigStopOnCoolFail INTEGER,
airIRG3CMConfigStartupDelay INTEGER,
airIRG3CMConfigRemoteOnStandby INTEGER,
airIRG3CMConfigPowerSource INTEGER
}
airIRG3CMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AirIRG3CMConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows to access CM configuration table."
::= { airIRG3CM 7 }
airIRG3CMConfigEntry OBJECT-TYPE
SYNTAX AirIRG3CMConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CM configuration table entry."
INDEX { airIRG3CMConfigDeviceIndex}
::= { airIRG3CMConfigTable 1 }
airIRG3CMConfigDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of CM configuration table."
::= { airIRG3CMConfigEntry 1 }
airIRG3CMConfigCMID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CM ID (RDU Number - Group Number - CM Unit Number)."
::= { airIRG3CMConfigEntry 2 }
airIRG3CMConfigStopOnCoolFail OBJECT-TYPE
SYNTAX INTEGER{
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable Stop On cool fail. When enabled, stops the unit
if it detects that it is blowing warm air into the cold aisle."
::= { airIRG3CMConfigEntry 3 }
airIRG3CMConfigStartupDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM start up delay in seconds."
::= { airIRG3CMConfigEntry 4 }
airIRG3CMConfigRemoteOnStandby OBJECT-TYPE
SYNTAX INTEGER{
standBy (1),
on (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM configuration for operating mode."
::= { airIRG3CMConfigEntry 5 }
airIRG3CMConfigPowerSource OBJECT-TYPE
SYNTAX INTEGER{
singleFeed (1),
dualFeed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CM power source."
::= { airIRG3CMConfigEntry 6 }
-- End of airIRGen3
-- RACK AIR REMOVAL UNIT IDENT
rARUIdentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for query of the individual devices.
The number of entries is contained in the
rARUStatusAruDeviceCount OID."
::= { rARUIdent 1 }
rARUIdentEntry OBJECT-TYPE
SYNTAX RARUIdentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The device to query."
INDEX { rARUIdentAruIndex}
::= { rARUIdentTable 1 }
RARUIdentEntry ::=
SEQUENCE {
rARUIdentAruIndex INTEGER,
rARUIdentName DisplayString
}
rARUIdentAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUIdentEntry 1 }
rARUIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the device. "
::= { rARUIdentEntry 2 }
-- RACK AIR REMOVAL UNIT CONFIGURATION
rARUConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuration of the individual ARU devices accessible from this IP address.
The number of entries is contained in the rARUStatusAruDeviceCount OID."
::= { rARUConfig 1 }
rARUConfigEntry OBJECT-TYPE
SYNTAX RARUConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ARUs to configure."
INDEX { rARUConfigAruIndex }
::= { rARUConfigTable 1 }
RARUConfigEntry ::=
SEQUENCE {
rARUConfigAruIndex INTEGER,
rARUConfigAruName DisplayString,
rARUConfigAruRemoteSetpoint INTEGER,
rARUConfigAruTempOvrdEnableDisable INTEGER,
rARUConfigAruTempOvrdSetpoint INTEGER,
rARUConfigAruMasterControl INTEGER
}
rARUConfigAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUConfigEntry 1 }
rARUConfigAruName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the ARU."
::= { rARUConfigEntry 2 }
rARUConfigAruRemoteSetpoint OBJECT-TYPE
SYNTAX INTEGER {
aruOff (1),
aru85F-29C (2),
aru90F-32C (3),
aru95F-35C (4),
aru100F-38C (5),
aru7kW-1200cfm (6),
aru5kW-800cfm (7),
aru3kW-500cfm (8),
aru2kW-300cfm (9),
aru400cfm (10),
aru600cfm (11),
aru700cfm (12),
aru900cfm (13),
aru1000cfm (14),
aru1400cfm (15),
aru1600cfm (16),
aru1800cfm (17),
aru2000cfm (18)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID defines the desired base airflow of the ARU, and sets the
speed of the ARU fans when the temperature override is inactive.
Values specified in cfm (cubic feet per minute) can be converted
to metric values using the conversion factor:
1 cfm = 1.70 m^3/hr (cubic meters per hour).
Values (1) through (9) are for support of legacy (1st generation) ARUs.
Writing these values to a 2nd generation ARU will result in the following:
A value greater than (9) will be ignored by a 1st generation ARU.
aruOff (1) - Ignored
aru85F-29C (2) - 1200 cfm
aru90F-32C (3) - 800 cfm
aru95F-35C (4) - 500 cfm
aru100F-38C (5) - 400 cfm
aru7kW (6) - 1200 cfm
aru5kW (7) - 800 cfm
aru3kW (8) - 500 cfm
aru2kW (9) - 400 cfm
NOTE: -1 will be returned if the ARU is not communicating."
::= { rARUConfigEntry 3 }
rARUConfigAruTempOvrdEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID is used to enable/disable the remote temperature override setting of the ARU.
If this OID is set to 1, the remote setting for temperature override is disabled.
If this OID is set to 2, the remote setting for temperature override is enabled."
::= { rARUConfigEntry 4 }
rARUConfigAruTempOvrdSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This OID is the Temperature Override setpoint of the ARU.
NOTE: -1 will be returned if the ARU is not communicating.
Values are represented in whole number degrees using the
units specified in the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { rARUConfigEntry 5 }
rARUConfigAruMasterControl OBJECT-TYPE
SYNTAX INTEGER {
aruOn (1),
aruOff (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the master on/off control for the ARU."
::= { rARUConfigEntry 6 }
-- RACK AIR REMOVAL UNIT STATUS
rARUStatusAruDeviceCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ARUs accessible from this IP."
::= { rARUStatus 1 }
rARUStatusSysTempUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(1),
fahrenheit(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature scale used to display the temperature
in the system, Celsius(1) or Fahrenheit(2).
This setting is based on the system preferences
configuration in the agent."
::= { rARUStatus 2 }
rARUStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for query of the individual ARUs accessible from this IP address.
The number of entries is contained in the rARUStatusAruDeviceCount OID."
::= { rARUStatus 3 }
rARUStatusEntry OBJECT-TYPE
SYNTAX RARUStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ARUs to access."
INDEX { rARUStatusAruIndex }
::= { rARUStatusTable 1 }
RARUStatusEntry ::=
SEQUENCE {
rARUStatusAruIndex INTEGER,
rARUStatusAruName DisplayString,
rARUStatusAruRemoteSetpoint INTEGER,
rARUStatusAruManualSetpoint INTEGER,
rARUStatusAruTemp1 INTEGER,
rARUStatusAruTemp2 INTEGER,
rARUStatusAruTemp3 INTEGER,
rARUStatusAruTempOvrdEnableDisable INTEGER,
rARUStatusAruTempOvrdSetpoint INTEGER,
rARUStatusAruAlarmState DisplayString,
rARUStatusAruCommStatus INTEGER,
rARUStatusAruTempOvrdStatus INTEGER,
rARUStatusAruMasterControl INTEGER,
rARUStatusAruTotalAirflow INTEGER
}
rARUStatusAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUStatusEntry 1 }
rARUStatusAruName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the ARU."
::= { rARUStatusEntry 2 }
rARUStatusAruRemoteSetpoint OBJECT-TYPE
SYNTAX INTEGER {
aruOff (1),
aru85F-29C (2),
aru90F-32C (3),
aru95F-35C (4),
aru100F-38C (5),
aru7kW-1200cfm (6),
aru5kW-800cfm (7),
aru3kW-500cfm (8),
aru2kW-300cfm (9),
aru400cfm (10),
aru600cfm (11),
aru700cfm (12),
aru900cfm (13),
aru1000cfm (14),
aru1400cfm (15),
aru1600cfm (16),
aru1800cfm (17),
aru2000cfm (18)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID defines the desired base airflow of the ARU, or the
speed of the ARU fans when the temperature override is inactive.
See also the rARUConfigAruRemoteSetpoint OID.
NOTE: -1 will be returned if the ARU is not communicating."
::= { rARUStatusEntry 3 }
rARUStatusAruManualSetpoint OBJECT-TYPE
SYNTAX INTEGER {
aruOff (1),
aru85F-29C (2),
aru90F-32C (3),
aru95F-35C (4),
aru100F-38C (5),
aru7kW (6),
aru5kW (7),
aru3kW (8),
aru2kW (9),
aruRem (10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Manual operating setpoint of the ARU, which is set on the
panel of the ARU. If the ARU doesn't have a manual ,
the OID will always return a value of aruRem (10).
NOTE: -1 will be returned if the ARU is not communicating.
Values are represented in whole number degrees or kW.
If the manual setpoint is set to Remote, or if the ARU doesn't
have a manual switch, this OID will return aruRem."
::= { rARUStatusEntry 4 }
rARUStatusAruTemp1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ARU temperature probe #1 reading.
The summary exhaust temperature on 2nd generation ARUs.
NOTE: -1 will be returned if the ARU is not communicating.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { rARUStatusEntry 5 }
rARUStatusAruTemp2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ARU temperature probe #2 reading.
The exhaust temperature in the upper plenum on 2nd generation ARUs.
NOTE: -1 will be returned if the ARU is not communicating.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { rARUStatusEntry 6 }
rARUStatusAruTemp3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ARU temperature probe #3 reading.
The exhaust temperature in the lower plenum on 2nd generation ARUs.
NOTE: -1 will be returned if the ARU is not communicating.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { rARUStatusEntry 7 }
rARUStatusAruTempOvrdEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This OID indicates whether the ARU remote temperature override is enabled or disabled.
If this OID is a 1, the remote setting for temperature override is disabled.
If this OID is a 2, the remote setting for temperature override is enabled."
::= { rARUStatusEntry 8 }
rARUStatusAruTempOvrdSetpoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ARU remote temperature override setpoint setting.
NOTE: -1 will be returned if the ARU is not communicating.
Values are represented in whole number degrees.
Units are displayed in the scale shown in
the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
::= { rARUStatusEntry 9 }
rARUStatusAruAlarmState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ASCII string containing the 8 flags representing
the current alarm state of the ARU. If the state of
the ARU is unknown, this variable is set to 'UNKNOWN'.
The flags are numbered 1 to 8, read from left to
right. The flags are defined as follows:
Flag 1: Fan Fail 1
Flag 2: Fan Fail 2
Flag 3: Fan Fail 3
Flag 4: Smoke (if ARU is equipped with smoke detector)
Flag 5: High Temp (Out of Thermal Control)
Flag 6: Over Temp (Exhaust Temp. Exceeds Override Setpoint)
Flag 7: Fan Fail 4 (Gen 2 ARU only)
Flag 8: Reserved"
::= { rARUStatusEntry 10 }
rARUStatusAruCommStatus OBJECT-TYPE
SYNTAX INTEGER {
commsNeverDiscovered(1),
commsEstablished(2),
commsLost(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of communications to the device.
commNeverDiscovered(1) indicates there has never been communications with this device.
commsEstablished(2) indicates communication is normal and active with this device.
commsLost(3) indicates communication had been established, but is no device."
::= { rARUStatusEntry 11 }
rARUStatusAruTempOvrdStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive (1),
active (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the ARU is increasing airflow because
exhaust air temperature has exceeded the setting specified in the
rARUConfigAruTempOvrdSetpoint OID."
::= { rARUStatusEntry 12 }
rARUStatusAruMasterControl OBJECT-TYPE
SYNTAX INTEGER {
aruOn (1),
aruOff (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the master on/off control for the ARU."
::= { rARUStatusEntry 13 }
rARUStatusAruTotalAirflow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total airflow provided by the aru. Specified in cfm (cubic feet per minute).
Can be converted to metric values using the conversion factor:
1 cfm = 1.70 m^3/hr (cubic meters per hour)."
::= { rARUStatusEntry 14 }
-- RACK AIR REMOVAL UNIT FAN STATUS
rARUFanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUFanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for query of the individual devices.
The number of entries is contained in the
rARUStatusAruDeviceCount OID."
::= { rARUFanStatus 1 }
rARUFanStatusEntry OBJECT-TYPE
SYNTAX RARUFanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The device to query."
INDEX { rARUFanStatusAruIndex, rARUFanStatusFanIndex}
::= { rARUFanStatusTable 1 }
RARUFanStatusEntry ::=
SEQUENCE {
rARUFanStatusAruIndex INTEGER,
rARUFanStatusNominalFanSpeed INTEGER,
rARUFanStatusSelectedFanLevel INTEGER,
rARUFanStatusReplacementThreshold INTEGER,
rARUFanStatusFanIndex INTEGER,
rARUFanStatusFanOperatingStatus INTEGER,
rARUFanStatusFanRpmSpeed INTEGER,
rARUFanStatusFanFlowRate INTEGER,
rARUFanStatusFanInServiceDate DisplayString,
rARUFanStatusFanRunhourCounter INTEGER,
rARUFanStatusFanRunhourReset INTEGER
}
rARUFanStatusAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUFanStatusEntry 1 }
rARUFanStatusNominalFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal rotational speed (RPM) of the fans when they are
operating at the 100% level."
::= { rARUFanStatusEntry 2 }
rARUFanStatusSelectedFanLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The currently selected ARU speed level,
specified in percent of full capacity."
::= { rARUFanStatusEntry 3 }
rARUFanStatusReplacementThreshold OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
khr20 (2),
khr25 (3),
khr30 (4),
khr35 (5),
khr40 (6),
khr50 (7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold above which a run hour alarm will exist, indicating
that it might be time to proactively replace a fan."
::= { rARUFanStatusEntry 4 }
rARUFanStatusFanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to an individual fan table entry."
::= { rARUFanStatusEntry 5 }
rARUFanStatusFanOperatingStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
off (2),
onOk (3),
onDegraded (4),
offFailed (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operating state of the fan."
::= { rARUFanStatusEntry 6 }
rARUFanStatusFanRpmSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current rotational speed of the fan,
specified in rotations per minute (RPM)."
::= { rARUFanStatusEntry 7 }
rARUFanStatusFanFlowRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The flow rate provided by the fan, based on its measured rotational speed.
Specified in cfm (cubic feet per minute). Can be converted to metric values
using the conversion factor: 1 cfm = 1.70 m^3/hr (cubic meters per hour)."
::= { rARUFanStatusEntry 8 }
rARUFanStatusFanInServiceDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The installation/replacement date of the fan."
::= { rARUFanStatusEntry 9 }
rARUFanStatusFanRunhourCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total time for which the fan has been running.
Specified in 10ths of hours."
::= { rARUFanStatusEntry 10 }
rARUFanStatusFanRunhourReset OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing yes to this This OID will reset a fan's total run hour counter,
which is shown in the rARUFanStatusFanRunhourCounter OID."
::= { rARUFanStatusEntry 11 }
-- RACK AIR REMOVAL UNIT INPUT POWER STATUS
rARUPowerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUPowerStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for query of the individual ARUs accessible from this IP address.
The number of entries is contained in the rARUStatusAruDeviceCount OID."
::= { rARUPower 1 }
rARUPowerStatusEntry OBJECT-TYPE
SYNTAX RARUPowerStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The device to query."
INDEX { rARUPowerStatusAruIndex}
::= { rARUPowerStatusTable 1 }
RARUPowerStatusEntry ::=
SEQUENCE {
rARUPowerStatusAruIndex INTEGER,
rARUPowerStatusPrimaryAcPresent INTEGER,
rARUPowerStatusAuxiliaryAcPresent INTEGER,
rARUPowerStatusRedundantAcConfig INTEGER
}
rARUPowerStatusAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUPowerStatusEntry 1 }
rARUPowerStatusPrimaryAcPresent OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not line voltage is present on AC input 1."
::= { rARUPowerStatusEntry 2 }
rARUPowerStatusAuxiliaryAcPresent OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not line voltage is present on AC input 2."
::= { rARUPowerStatusEntry 3 }
rARUPowerStatusRedundantAcConfig OBJECT-TYPE
SYNTAX INTEGER {
singleCord (1),
dualCord (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether or not a dual cord is in use.
When this setting is set to dualCord (2), aruRedundantPowerLostAlarm
traps will be generated when either primary or auxiliary input
voltage is not present. When this setting is set to singleCord (1),
aruRedundantPowerLostAlarm traps will not be generated."
::= { rARUPowerStatusEntry 4 }
-- RACK AIR REMOVAL UNIT SENSOR STATUS
rARUSensorsStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the rARUSensorsStatusTable."
::= { rARUSensors 1 }
rARUSensorsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUSensorsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting environmental sensor status information."
::= { rARUSensors 2 }
rARUSensorsStatusEntry OBJECT-TYPE
SYNTAX RARUSensorsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { rARUSensorsStatusAruIndex, rARUSensorsStatusSensorNumber }
::= { rARUSensorsStatusTable 1 }
RARUSensorsStatusEntry ::=
SEQUENCE {
rARUSensorsStatusAruIndex INTEGER,
rARUSensorsStatusSensorNumber INTEGER,
rARUSensorsTemperature INTEGER
}
rARUSensorsStatusAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUSensorsStatusEntry 1 }
rARUSensorsStatusSensorNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the sensor on the device."
::= { rARUSensorsStatusEntry 2 }
rARUSensorsTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor's current temperature reading. The temperature scale
is based on the system preferences configuration."
::= { rARUSensorsStatusEntry 3 }
-- RACK AIR REMOVAL UNIT CONFIG STATUS
rARUSensorsConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the rARUSensorsConfigTable."
::= { rARUSensors 3 }
rARUSensorsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RARUSensorsConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting configuration information from
environmental sensors attached to the device."
::= { rARUSensors 4 }
rARUSensorsConfigEntry OBJECT-TYPE
SYNTAX RARUSensorsConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit to get data from."
INDEX { rARUSensorsConfigAruIndex, rARUSensorsConfigSensorNumber }
::= { rARUSensorsConfigTable 1 }
RARUSensorsConfigEntry ::=
SEQUENCE {
rARUSensorsConfigAruIndex INTEGER,
rARUSensorsConfigSensorNumber INTEGER,
rARUSensorsName DisplayString,
rARUSensorsLocation DisplayString,
rARUSensorsTempMaxThresh INTEGER,
rARUSensorsTempHighThresh INTEGER,
rARUSensorsTempLowThresh INTEGER,
rARUSensorsTempMinThresh INTEGER,
rARUSensorsTempThreshHysteresis INTEGER,
rARUSensorsTempShortDecRateThreshValue INTEGER,
rARUSensorsTempShortDecRateThreshTime INTEGER,
rARUSensorsTempShortIncRateThreshValue INTEGER,
rARUSensorsTempShortIncRateThreshTime INTEGER,
rARUSensorsTempLongDecRateThreshValue INTEGER,
rARUSensorsTempLongDecRateThreshTime INTEGER,
rARUSensorsTempLongIncRateThreshValue INTEGER,
rARUSensorsTempLongIncRateThreshTime INTEGER
}
rARUSensorsConfigAruIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the ARU entry."
::= { rARUSensorsConfigEntry 1 }
rARUSensorsConfigSensorNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the sensor on the device."
::= { rARUSensorsConfigEntry 2 }
rARUSensorsName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A descriptive name for the sensor."
::= { rARUSensorsConfigEntry 3 }
rARUSensorsLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the sensor."
::= { rARUSensorsConfigEntry 4 }
rARUSensorsTempMaxThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which a maximum temperature threshold
violation alarm will be generated for this sensor.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 5 }
rARUSensorsTempHighThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which a high temperature threshold
violation alarm will be generated for this sensor.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 6 }
rARUSensorsTempLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which a low temperature threshold
violation alarm will be generated for this sensor.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 7 }
rARUSensorsTempMinThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The temperature at which a min temperature threshold
violation alarm will be generated for this sensor.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 8 }
rARUSensorsTempThreshHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The change in temperature required to cause a
temperature alarm to change from an active to an
inactive state. The temperature scale is based on
the system preferences configuration."
::= { rARUSensorsConfigEntry 9 }
rARUSensorsTempShortDecRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature short-term decreasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 10 }
rARUSensorsTempShortDecRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not decrease
beyond the value specified by the temperature short-term
decreasing rate threshold value."
::= { rARUSensorsConfigEntry 11 }
rARUSensorsTempShortIncRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature short-term increasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 12 }
rARUSensorsTempShortIncRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not increase
beyond the value specified by the temperature short-term
increasing rate threshold value."
::= { rARUSensorsConfigEntry 13 }
rARUSensorsTempLongDecRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature long-term decreasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 14 }
rARUSensorsTempLongDecRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not decrease
beyond the value specified by the temperature long-term
decreasing rate threshold value."
::= { rARUSensorsConfigEntry 15 }
rARUSensorsTempLongIncRateThreshValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the temperature long-term increasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the system preferences
configuration."
::= { rARUSensorsConfigEntry 16 }
rARUSensorsTempLongIncRateThreshTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time over which the temperature may not increase
beyond the value specified by the temperature long-term
increasing rate threshold value."
::= { rARUSensorsConfigEntry 17 }
-- MODULAR DISTRIBUTION SYSTEM
-- Modular Information
isxModularDistInfoTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the isxModularDistInfoTable."
::= { isxModularDistInfo 1 }
isxModularDistInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information about the modular
distribution metering equipment."
::= { isxModularDistInfo 2 }
isxModularDistInfoEntry OBJECT-TYPE
SYNTAX IsxModularDistInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about an individual metering segment."
INDEX { isxModularDistInfoSegmentIndex }
::= { isxModularDistInfoTable 1 }
IsxModularDistInfoEntry ::=
SEQUENCE {
isxModularDistInfoSegmentIndex INTEGER,
isxModularDistInfoMeterModelNumber DisplayString,
isxModularDistInfoMeterSerialNumber DisplayString,
isxModularDistInfoMeterDateOfManufacture DisplayString,
isxModularDistInfoMeterFirmwareRev DisplayString,
isxModularDistInfoMeterHardwareRev DisplayString
}
isxModularDistInfoSegmentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the metering segment."
::= { isxModularDistInfoEntry 1 }
isxModularDistInfoMeterModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the metering board for this segment."
::= { isxModularDistInfoEntry 2 }
isxModularDistInfoMeterSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the metering board for this segment."
::= { isxModularDistInfoEntry 3 }
isxModularDistInfoMeterDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of manufacture for the metering board for this segment,
in the format mm/dd/yyyy."
::= { isxModularDistInfoEntry 4 }
isxModularDistInfoMeterFirmwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision number of the metering board for this segment."
::= { isxModularDistInfoEntry 5 }
isxModularDistInfoMeterHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision number of the metering board for this segment."
::= { isxModularDistInfoEntry 6 }
-- Distribution Modules
isxModularDistModuleInfoTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the isxModularDistModuleInfoTable."
::= { isxModularDistModules 1 }
isxModularDistModuleInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistModuleInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting basic information about the distribution modules
installed in the system."
::= { isxModularDistModules 2 }
isxModularDistModuleInfoEntry OBJECT-TYPE
SYNTAX IsxModularDistModuleInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about a specific distribution module."
INDEX { isxModularDistModuleInfoModIndex }
::= { isxModularDistModuleInfoTable 1 }
IsxModularDistModuleInfoEntry ::=
SEQUENCE {
isxModularDistModuleInfoModIndex INTEGER,
isxModularDistModuleInfoAlarmStatus INTEGER,
isxModularDistModuleInfoModelNumber DisplayString,
isxModularDistModuleInfoSerialNumber DisplayString,
isxModularDistModuleInfoDateOfManufacture DisplayString,
isxModularDistModuleInfoNumCables INTEGER
}
isxModularDistModuleInfoModIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the distribution module."
::= { isxModularDistModuleInfoEntry 1 }
isxModularDistModuleInfoAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
warning (2),
critical (3),
notPresent (4),
unknown (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of this module. This reflects the indicator lamp(s) on the front of the module.
A value of notPresent indicates that the module is not installed.
A value of unknown indicates that there is no communication with the
metering segment for this module."
::= { isxModularDistModuleInfoEntry 2 }
isxModularDistModuleInfoModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model number of the distribution module."
::= { isxModularDistModuleInfoEntry 3 }
isxModularDistModuleInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the distribution module."
::= { isxModularDistModuleInfoEntry 4 }
isxModularDistModuleInfoDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date that the distribution module was manufactured."
::= { isxModularDistModuleInfoEntry 5 }
isxModularDistModuleInfoNumCables OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of cables provided by this distribution module."
::= { isxModularDistModuleInfoEntry 6 }
isxModularDistModuleBreakerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the isxModularDistModuleBreakerTable."
::= { isxModularDistModules 3 }
isxModularDistModuleBreakerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistModuleBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting operational information about the distribution modules."
::= { isxModularDistModules 4 }
isxModularDistModuleBreakerEntry OBJECT-TYPE
SYNTAX IsxModularDistModuleBreakerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about a specific distribution modules and circuit breakers."
INDEX { isxModularDistModuleBreakerModIndex, isxModularDistModuleBreakerPhaseIndex}
::= { isxModularDistModuleBreakerTable 1 }
IsxModularDistModuleBreakerEntry ::=
SEQUENCE {
isxModularDistModuleBreakerModIndex INTEGER,
isxModularDistModuleBreakerPhaseIndex INTEGER,
isxModularDistModuleBreakerAlarmStatus INTEGER,
isxModularDistModuleBreakerRating INTEGER,
isxModularDistModuleBreakerPhysicalGroup INTEGER,
isxModularDistModuleBreakerCableNum INTEGER,
isxModularDistModuleBreakerPosition INTEGER,
isxModularDistModuleBreakerPositionAlarms INTEGER,
isxModularDistModuleBreakerCurrent INTEGER,
isxModularDistModuleBreakerPercent INTEGER,
isxModularDistModuleBreakerPower INTEGER
}
isxModularDistModuleBreakerModIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The distribution module number."
::= { isxModularDistModuleBreakerEntry 1 }
isxModularDistModuleBreakerPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phaseL1(1),
phaseL2(2),
phaseL3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to an individual breaker in the distribution module. The index also corresponds
to the system phase to which the breaker is attached."
::= { isxModularDistModuleBreakerEntry 2 }
isxModularDistModuleBreakerAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a bit map representing the active alarms for this breaker:
b0 - Minimum current threshold exceeded (critical)
b1 - Low current threshold exceeded (warning)
b2 - High current threshold exceeded (warning)
b3 - Maximum current threshold exceeded (critical)
b4 - Breaker is open (critical)
If a bit is set, the corresponding alarm is active."
::= { isxModularDistModuleBreakerEntry 3 }
isxModularDistModuleBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current rating of the breaker."
::= { isxModularDistModuleBreakerEntry 4 }
isxModularDistModuleBreakerPhysicalGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Numeric value used to indicate that a breaker is a part of a multi-pole breaker.
Breakers within a distribution module, with equivalent physical group numbers,
may have their handles physically tied together.
A value of 1 indicates breakers that are physically tied together as part of a
multi-pole breaker.
A value of 0 indicates a single-handle breaker that is not physically tied to
another breaker."
::= { isxModularDistModuleBreakerEntry 5 }
isxModularDistModuleBreakerCableNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Numeric value used to indicate the distribution cable to which
this breaker is connected. These distribution cables are described
in the table isxModularDistModuleOutputTable,
and indexed by the OID isxModularDistModuleOutputCordIndex."
::= { isxModularDistModuleBreakerEntry 6 }
isxModularDistModuleBreakerPosition OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical status of this breaker pole, either closed or open (including tripped)."
::= { isxModularDistModuleBreakerEntry 7 }
isxModularDistModuleBreakerPositionAlarms OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable breaker position alarms for this circuit breaker."
::= { isxModularDistModuleBreakerEntry 8 }
isxModularDistModuleBreakerCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current flowing though this breaker. Measured in tenths of amps."
::= { isxModularDistModuleBreakerEntry 9 }
isxModularDistModuleBreakerPercent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The loading on this breaker as a percentage of the breaker's current rating.
Expressed in tenths of percent."
::= { isxModularDistModuleBreakerEntry 10 }
isxModularDistModuleBreakerPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power being supplied through this breaker. Measured in tenths of kW."
::= { isxModularDistModuleBreakerEntry 11 }
isxModularDistModuleOutputsTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the isxModularDistModuleOutputTable."
::= { isxModularDistModules 5 }
isxModularDistModuleOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistModuleOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting and setting information related to the
load equipment being fed by the distribution modules in the ISX
Modular Distribution System."
::= { isxModularDistModules 6 }
isxModularDistModuleOutputEntry OBJECT-TYPE
SYNTAX IsxModularDistModuleOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about a specific distribution module
and its output distribution cables."
INDEX { isxModularDistModuleOutputModIndex, isxModularDistModuleOutputCordIndex }
::= { isxModularDistModuleOutputTable 1 }
IsxModularDistModuleOutputEntry ::=
SEQUENCE {
isxModularDistModuleOutputModIndex INTEGER,
isxModularDistModuleOutputNumCables INTEGER,
isxModularDistModuleOutputCordIndex INTEGER,
isxModularDistModuleOutputName DisplayString,
isxModularDistModuleOutputLocation DisplayString,
isxModularDistModuleOutputStatus INTEGER,
isxModularDistModuleOutputAlarmGeneration INTEGER,
isxModularDistModuleOutputBreakerMap INTEGER,
isxModularDistModuleOutputThresholdMin INTEGER,
isxModularDistModuleOutputThresholdLow INTEGER,
isxModularDistModuleOutputThresholdHigh INTEGER,
isxModularDistModuleOutputThresholdMax INTEGER,
isxModularDistModuleOutputAlarmMinEnable INTEGER,
isxModularDistModuleOutputAlarmLowEnable INTEGER,
isxModularDistModuleOutputAlarmHighEnable INTEGER,
isxModularDistModuleOutputAlarmMaxEnable INTEGER,
isxModularDistModuleOutputCableLength INTEGER,
isxModularDistModuleOutputConnectorType DisplayString,
isxModularDistModuleOutputAvailableVoltages INTEGER,
isxModularDistModuleOutputTotalPower INTEGER,
isxModularDistModuleOutputKwhUsage INTEGER,
isxModularDistModuleOutputKwhReset INTEGER,
isxModularDistModuleOutputKwhResetDate DisplayString
}
isxModularDistModuleOutputModIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the distribution module supplying power to the load equipment."
::= { isxModularDistModuleOutputEntry 1 }
isxModularDistModuleOutputNumCables OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of distribution cables provided by this module."
::= { isxModularDistModuleOutputEntry 2 }
isxModularDistModuleOutputCordIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an individual distribution cable supplied by this module."
::= { isxModularDistModuleOutputEntry 3 }
isxModularDistModuleOutputName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string describing the load equipment being supplied by this distribution cable."
::= { isxModularDistModuleOutputEntry 4 }
isxModularDistModuleOutputLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string describing the location of equipment being supplied by distribution cable."
::= { isxModularDistModuleOutputEntry 5 }
isxModularDistModuleOutputStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
warning (2),
critical (3),
notPresent (4),
unknown (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the worse case severity for alarms associated with this distribution cable.
A value of notPresent indicates that the cable does not exist for this module.
A value of unknown indicates that the there is no communication with the
metering segment for this distribution cable's module."
::= { isxModularDistModuleOutputEntry 6 }
isxModularDistModuleOutputAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable all alarm generation related to this distribution cable."
::= { isxModularDistModuleOutputEntry 7 }
isxModularDistModuleOutputBreakerMap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a bit map representing the breaker poles within the
module that are associated with this distribution cable.
The following 3 bits are used to indicate the indices of
the breakers feeding the cable:
b0 - Module breaker L1
b1 - Module breaker L2
b2 - Module breaker L3
If a bit is set, the breaker is used to feed this distribution cable.
These breakers are described in the table isxModularDistModuleBreakerTable,
and indexed by the OID isxModularDistModuleBreakerPhaseIndex."
::= { isxModularDistModuleOutputEntry 8 }
isxModularDistModuleOutputThresholdMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current drops below this value a critical alarm will exist."
::= { isxModularDistModuleOutputEntry 9 }
isxModularDistModuleOutputThresholdLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current drops below this value a warning alarm will exist."
::= { isxModularDistModuleOutputEntry 10 }
isxModularDistModuleOutputThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current exceeds this value a warning alarm will exist."
::= { isxModularDistModuleOutputEntry 11 }
isxModularDistModuleOutputThresholdMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current exceeds this value a critical alarm will exist."
::= { isxModularDistModuleOutputEntry 12 }
isxModularDistModuleOutputAlarmMinEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable minimum current alarm generation for this distribution cable."
::= { isxModularDistModuleOutputEntry 13 }
isxModularDistModuleOutputAlarmLowEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable low current alarm generation for this distribution cable."
::= { isxModularDistModuleOutputEntry 14 }
isxModularDistModuleOutputAlarmHighEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable high current alarm generation for this distribution cable."
::= { isxModularDistModuleOutputEntry 15 }
isxModularDistModuleOutputAlarmMaxEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable maximum current alarm generation for this distribution cable."
::= { isxModularDistModuleOutputEntry 16 }
isxModularDistModuleOutputCableLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length of this distribution cable. Specified in tenths of meters."
::= { isxModularDistModuleOutputEntry 17 }
isxModularDistModuleOutputConnectorType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string describing the connector on the end of this distribution cable."
::= { isxModularDistModuleOutputEntry 18 }
isxModularDistModuleOutputAvailableVoltages OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a bit map representing the voltages that are available at the connector.
6 bits are used to indicate the following:
b0 - L1
b1 - L2
b2 - L3
b3 - L1-2
b4 - L2-3
b5 - L3-1"
::= { isxModularDistModuleOutputEntry 19 }
isxModularDistModuleOutputTotalPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total power being consumed by the load equipment supplied by this distribution cable.
Measured in tenths of kW."
::= { isxModularDistModuleOutputEntry 20 }
isxModularDistModuleOutputKwhUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total energy consumed by the load equipment fed by this distribution cable.
This is the total since the date specified in the isxModularDistModuleOutputKwhResetDate
OID, and may be cleared using the isxModularDistModuleOutputKwhReset OID.
Measured in tenths of kWh."
::= { isxModularDistModuleOutputEntry 21 }
isxModularDistModuleOutputKwhReset OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing yes to this OID will reset the total kWh usage shown
in the isxModularDistModuleOutputKwhUsage OID."
::= { isxModularDistModuleOutputEntry 22 }
isxModularDistModuleOutputKwhResetDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date that the kWh usage was reset, in the format mm/dd/yyyy. Example: 01/01/2000."
::= { isxModularDistModuleOutputEntry 23 }
-- Distribution Subfeeds
isxModularDistSubFeedInfoTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the isxModularDistSubFeedInfoTable."
::= { isxModularDistSubFeeds 1 }
isxModularDistSubFeedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistSubFeedInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting information about distribution subfeed breakers."
::= { isxModularDistSubFeeds 2 }
isxModularDistSubFeedInfoEntry OBJECT-TYPE
SYNTAX IsxModularDistSubFeedInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information about a specific distribution subfeed."
INDEX { isxModularDistSubFeedInfoSubIndex }
::= { isxModularDistSubFeedInfoTable 1 }
IsxModularDistSubFeedInfoEntry ::=
SEQUENCE {
isxModularDistSubFeedInfoSubIndex INTEGER,
isxModularDistSubFeedInfoName DisplayString,
isxModularDistSubFeedInfoLocation DisplayString,
isxModularDistSubFeedInfoBreakerRating INTEGER,
isxModularDistSubFeedInfoBreakerPosition INTEGER,
isxModularDistSubFeedInfoAlarmStatus INTEGER,
isxModularDistSubFeedInfoAlarmGeneration INTEGER,
isxModularDistSubFeedInfoThresholdMin INTEGER,
isxModularDistSubFeedInfoThresholdLow INTEGER,
isxModularDistSubFeedInfoThresholdHigh INTEGER,
isxModularDistSubFeedInfoThresholdMax INTEGER,
isxModularDistSubFeedInfoAlarmMinEnable INTEGER,
isxModularDistSubFeedInfoAlarmLowEnable INTEGER,
isxModularDistSubFeedInfoAlarmHighEnable INTEGER,
isxModularDistSubFeedInfoAlarmMaxEnable INTEGER,
isxModularDistSubFeedInfoBreakerAlarmEnable INTEGER,
isxModularDistSubFeedInfoTotalPower INTEGER,
isxModularDistSubFeedInfoKwhUsage INTEGER,
isxModularDistSubFeedInfoKwhReset INTEGER,
isxModularDistSubFeedInfoKwhResetDate DisplayString
}
isxModularDistSubFeedInfoSubIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an individual subfeed."
::= { isxModularDistSubFeedInfoEntry 1 }
isxModularDistSubFeedInfoName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string describing the load equipment being supplied by this subfeed."
::= { isxModularDistSubFeedInfoEntry 2 }
isxModularDistSubFeedInfoLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string describing the location of the equipment being supplied by this subfeed."
::= { isxModularDistSubFeedInfoEntry 3 }
isxModularDistSubFeedInfoBreakerRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current rating of this subfeed breaker."
::= { isxModularDistSubFeedInfoEntry 4 }
isxModularDistSubFeedInfoBreakerPosition OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational status of this breaker, either closed or open (including tripped)."
::= { isxModularDistSubFeedInfoEntry 5 }
isxModularDistSubFeedInfoAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
warning (2),
critical (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The worst case alarm status for this subfeed."
::= { isxModularDistSubFeedInfoEntry 6 }
isxModularDistSubFeedInfoAlarmGeneration OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable all alarm generation related to this subfeed."
::= { isxModularDistSubFeedInfoEntry 7 }
isxModularDistSubFeedInfoThresholdMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current drops below this value a critical alarm will exist."
::= { isxModularDistSubFeedInfoEntry 8 }
isxModularDistSubFeedInfoThresholdLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current drops below this value a warning alarm will exist."
::= { isxModularDistSubFeedInfoEntry 9 }
isxModularDistSubFeedInfoThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current exceeds this value a warning alarm will exist."
::= { isxModularDistSubFeedInfoEntry 10 }
isxModularDistSubFeedInfoThresholdMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the current exceeds this value a critical alarm will exist."
::= { isxModularDistSubFeedInfoEntry 11 }
isxModularDistSubFeedInfoAlarmMinEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable minimum current alarm generation for this subfeed."
::= { isxModularDistSubFeedInfoEntry 12 }
isxModularDistSubFeedInfoAlarmLowEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable low current alarm generation for this subfeed."
::= { isxModularDistSubFeedInfoEntry 13 }
isxModularDistSubFeedInfoAlarmHighEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable high current alarm generation for this subfeed."
::= { isxModularDistSubFeedInfoEntry 14 }
isxModularDistSubFeedInfoAlarmMaxEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable maximum current alarm generation for this subfeed."
::= { isxModularDistSubFeedInfoEntry 15 }
isxModularDistSubFeedInfoBreakerAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable breaker position alarms for this subfeed."
::= { isxModularDistSubFeedInfoEntry 16 }
isxModularDistSubFeedInfoTotalPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total power being supplied by this subfeed. Measured in tenths of kW."
::= { isxModularDistSubFeedInfoEntry 17 }
isxModularDistSubFeedInfoKwhUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total energy consumed by the load equipment fed by this subfeed.
This is the total since the date specified in the isxModularDistSubFeedInfoKwhResetDate
OID, and may be cleared using the isxModularDistSubFeedInfoKwhReset OID.
Measured in tenths of kWh."
::= { isxModularDistSubFeedInfoEntry 18 }
isxModularDistSubFeedInfoKwhReset OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing yes to this OID will reset the total kWh usage shown
in the isxModularDistSubFeedInfoKwhUsage OID."
::= { isxModularDistSubFeedInfoEntry 19 }
isxModularDistSubFeedInfoKwhResetDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date that the kWh usage was reset, in the format mm/dd/yyyy. Example: 01/01/2000."
::= { isxModularDistSubFeedInfoEntry 20 }
isxModularDistSubFeedLoadingTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the isxModularDistSubFeedLoadingTable."
::= { isxModularDistSubFeeds 3 }
isxModularDistSubFeedLoadingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistSubFeedLoadingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting subfeed phase loading information."
::= { isxModularDistSubFeeds 4 }
isxModularDistSubFeedLoadingEntry OBJECT-TYPE
SYNTAX IsxModularDistSubFeedLoadingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing data for an individual subfeed."
INDEX { isxModularDistSubFeedLoadingSubIndex, isxModularDistSubFeedLoadingPhaseIndex }
::= { isxModularDistSubFeedLoadingTable 1 }
IsxModularDistSubFeedLoadingEntry ::= SEQUENCE {
isxModularDistSubFeedLoadingSubIndex INTEGER,
isxModularDistSubFeedLoadingPhaseIndex INTEGER,
isxModularDistSubFeedLoadingAlarmStatus INTEGER,
isxModularDistSubFeedLoadingCurrent INTEGER,
isxModularDistSubFeedLoadingPercent INTEGER,
isxModularDistSubFeedLoadingPower INTEGER
}
isxModularDistSubFeedLoadingSubIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of an individual subfeed."
::= { isxModularDistSubFeedLoadingEntry 1 }
isxModularDistSubFeedLoadingPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each input phase entry in the table."
::= { isxModularDistSubFeedLoadingEntry 2 }
isxModularDistSubFeedLoadingAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a bit map representing the active alarms for this subfeed:
b0 - Minimum current threshold exceeded (critical)
b1 - Low current threshold exceeded (warning)
b2 - High current threshold exceeded (warning)
b3 - Maximum current threshold exceeded (critical)
b4 - Breaker is open (critical)
If a bit is set, the corresponding alarm is active."
::= { isxModularDistSubFeedLoadingEntry 3 }
isxModularDistSubFeedLoadingCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current flowing though this subfeed phase. Measured in tenths of amps."
::= { isxModularDistSubFeedLoadingEntry 4 }
isxModularDistSubFeedLoadingPercent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The loading on this subfeed phase as a percentage of the subfeed's current rating.
Expressed in tenths of percent."
::= { isxModularDistSubFeedLoadingEntry 5 }
isxModularDistSubFeedLoadingPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power being supplied by this subfeed phase. Measured in tenths of kW."
::= { isxModularDistSubFeedLoadingEntry 6 }
-- Distribution System Output Voltage
isxModularDistSysOutputVoltageNominalLineToNeutral OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal line-to-neutral voltage available at the distribution panel."
::= { isxModularDistSysVoltage 1 }
isxModularDistSysOutputVoltageNominalLineToLine OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal line-to-line voltage available at the distribution panel."
::= { isxModularDistSysVoltage 2 }
isxModularDistSysOutputNominalFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal system output frequency. Measured in tenths of Hertz."
::= { isxModularDistSysVoltage 3 }
isxModularDistSysOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system output frequency in tenths of Hertz.
-1 if not available."
::= { isxModularDistSysVoltage 4 }
isxModularDistSysOutputVoltageMonitoring OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not output voltage alarm generation is present."
::= { isxModularDistSysVoltage 5 }
isxModularDistSysOutputVoltageThresholdMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the line-to-neutral voltage of any phase drops below this value a critical alarm will exist.
Specified as a percent of the nominal voltage, isxModularDistSysOutputVoltageNominalLineToNeutral.
This value is returned as a positive number which represents a negative percentage.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysVoltage 6 }
isxModularDistSysOutputVoltageThresholdLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the line-to-neutral voltage of any phase drops below this value a warning alarm will exist.
Specified as a percent of the nominal voltage, isxModularDistSysOutputVoltageNominalLineToNeutral.
This value is returned as a positive number which represents a negative percentage.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysVoltage 7 }
isxModularDistSysOutputVoltageThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the line-to-neutral voltage of any phase exceeds this value a warning alarm will exist.
Specified as a percent of the nominal voltage, isxModularDistSysOutputVoltageNominalLineToNeutral.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysVoltage 8 }
isxModularDistSysOutputVoltageThresholdMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the line-to-neutral voltage of any phase exceeds this value a critical alarm will exist.
Specified as a percent of the nominal voltage, isxModularDistSysOutputVoltageNominalLineToNeutral.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysVoltage 9 }
isxModularDistSysOutputVoltageAlarmMinEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable minimum voltage alarm generation for the distribution panel."
::= { isxModularDistSysVoltage 10 }
isxModularDistSysOutputVoltageAlarmLowEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable low voltage alarm generation for the distribution panel."
::= { isxModularDistSysVoltage 11 }
isxModularDistSysOutputVoltageAlarmHighEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable high voltage alarm generation for the distribution panel."
::= { isxModularDistSysVoltage 12 }
isxModularDistSysOutputVoltageAlarmMaxEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable maximum voltage alarm generation for the distribution panel."
::= { isxModularDistSysVoltage 13 }
isxModularDistSysOutputVoltageFrequencyTolerance OBJECT-TYPE
SYNTAX INTEGER{
freqToleranceOff (1),
freqTolerancePointTwo (2),
freqTolerancePointFive (3),
freqToleranceOne (4),
freqToleranceOnePointFive (5),
freqToleranceTwo (6),
freqToleranceThree (7),
freqToleranceFour (8),
freqToleranceFive (9),
freqToleranceNine (10),
freqToleranceNotAvailable (11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The circuit panel output frequency tolerance in Hertz.
When the system output frequency deviates from the nominal by more than this range,
a critical alarm will be generated."
::= { isxModularDistSysVoltage 14 }
isxModularDistSysVoltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistSysVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting the system output voltage information."
::= { isxModularDistSysVoltage 15 }
isxModularDistSysVoltageEntry OBJECT-TYPE
SYNTAX IsxModularDistSysVoltageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing data for an individual system output phase."
INDEX { isxModularDistSysVoltagePhaseIndex }
::= { isxModularDistSysVoltageTable 1 }
IsxModularDistSysVoltageEntry ::=
SEQUENCE {
isxModularDistSysVoltagePhaseIndex INTEGER,
isxModularDistSysVoltageAlarmStatus INTEGER,
isxModularDistSysVoltageLtoN INTEGER,
isxModularDistSysVoltageLtoL INTEGER
}
isxModularDistSysVoltagePhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each phase entry in the table."
::= { isxModularDistSysVoltageEntry 1 }
isxModularDistSysVoltageAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a bit map representing the active alarms for this output phase:
b0 - Minimum voltage threshold exceeded (critical)
b1 - Low voltage threshold exceeded (warning)
b2 - High voltage threshold exceeded (warning)
b3 - Maximum voltage threshold exceeded (critical)
If a bit is set, the corresponding alarm is active."
::= { isxModularDistSysVoltageEntry 2 }
isxModularDistSysVoltageLtoN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-neutral system output voltage available at the distribution panel.
Measured in tenths of Volts."
::= { isxModularDistSysVoltageEntry 3 }
isxModularDistSysVoltageLtoL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line-to-line system output voltage available at the distribution panel.
Measured in tenths of Volts."
::= { isxModularDistSysVoltageEntry 4 }
-- Distribution System Total Output Current
isxModularDistSysCurrentRating OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 100 percent current rating of the distribution panel."
::= { isxModularDistSysCurrent 1 }
isxModularDistSysCurrentMonitoring OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not total output current measurements and alarm generation are present."
::= { isxModularDistSysCurrent 2 }
isxModularDistSysCurrentThresholdMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When total system current in any phase drops below this value a critical alarm will exist.
Specified as a percent of the panel rating, isxModularDistSysCurrentRating.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysCurrent 3 }
isxModularDistSysCurrentThresholdLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When total system current in any phase drops below this value a warning alarm will exist.
Specified as a percent of the panel rating, isxModularDistSysCurrentRating.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysCurrent 4 }
isxModularDistSysCurrentThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When total system current in any phase exceeds this value a warning alarm will exist.
Specified as a percent of the panel rating, isxModularDistSysCurrentRating.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysCurrent 5 }
isxModularDistSysCurrentThresholdMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When total system current in any phase exceeds this value a critical alarm will exist.
Specified as a percent of the panel rating, isxModularDistSysCurrentRating.
A value of -1 indicates that the threshold is not available in the device."
::= { isxModularDistSysCurrent 6 }
isxModularDistSysCurrentAlarmMinEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable minimum total output current alarm generation."
::= { isxModularDistSysCurrent 7 }
isxModularDistSysCurrentAlarmLowEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable low total output current alarm generation."
::= { isxModularDistSysCurrent 8 }
isxModularDistSysCurrentAlarmHighEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable high total output current alarm generation."
::= { isxModularDistSysCurrent 9 }
isxModularDistSysCurrentAlarmMaxEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable maximum total output current alarm generation."
::= { isxModularDistSysCurrent 10 }
isxModularDistSysCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistSysCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting the total system phase current information."
::= { isxModularDistSysCurrent 11 }
isxModularDistSysCurrentEntry OBJECT-TYPE
SYNTAX IsxModularDistSysCurrentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing data for an individual system output phase."
INDEX { isxModularDistSysCurrentPhaseIndex }
::= { isxModularDistSysCurrentTable 1 }
IsxModularDistSysCurrentEntry ::=
SEQUENCE {
isxModularDistSysCurrentPhaseIndex INTEGER,
isxModularDistSysCurrentAlarmStatus INTEGER,
isxModularDistSysCurrentAmps INTEGER,
isxModularDistSysCurrentPercent INTEGER
}
isxModularDistSysCurrentPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each phase entry in the table."
::= { isxModularDistSysCurrentEntry 1 }
isxModularDistSysCurrentAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a bit map representing the active alarms for this output phase:
b0 - Minimum current threshold exceeded (critical)
b1 - Low current threshold exceeded (warning)
b2 - High current threshold exceeded (warning)
b3 - Maximum current threshold exceeded (critical)
If a bit is set, the corresponding alarm is active."
::= { isxModularDistSysCurrentEntry 2 }
isxModularDistSysCurrentAmps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current flowing though this system output phase. Measured in tenths of amps."
::= { isxModularDistSysCurrentEntry 3 }
isxModularDistSysCurrentPercent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The loading on this system output phase as a percentage of the panel current rating.
Expressed in tenths of percent."
::= { isxModularDistSysCurrentEntry 4 }
-- Distribution System Total Output Power
isxModularDistSysPowerTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total system power being supplied. Measured in tenths of kW."
::= { isxModularDistSysPower 1 }
isxModularDistSysPowerKwhUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total system energy consumed by the load equipment.
This is the total since the date specified in the isxModularDistSysOutputKwhResetDate
OID, and may be cleared using the isxModularDistSysOutputKwhReset OID.
Measured in tenths of kWh."
::= { isxModularDistSysPower 2 }
isxModularDistSysPowerKwhReset OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing yes to this OID will reset the total kWh usage shown
in the isxModularDistSysPowerKwhUsage OID."
::= { isxModularDistSysPower 3 }
isxModularDistSysPowerKwhResetDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date that the kWh usage was reset, in the format mm/dd/yyyy. Example: 01/01/2000."
::= { isxModularDistSysPower 4 }
isxModularDistSysPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsxModularDistSysPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting the total system phase power loading information."
::= { isxModularDistSysPower 5 }
isxModularDistSysPowerEntry OBJECT-TYPE
SYNTAX IsxModularDistSysPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing data for an individual system output phase."
INDEX { isxModularDistSysPowerPhaseIndex }
::= { isxModularDistSysPowerTable 1 }
IsxModularDistSysPowerEntry ::=
SEQUENCE {
isxModularDistSysPowerPhaseIndex INTEGER,
isxModularDistSysPowerKw INTEGER,
isxModularDistSysPowerKwhPhaseUsage INTEGER
}
isxModularDistSysPowerPhaseIndex OBJECT-TYPE
SYNTAX INTEGER{
phase1(1),
phase2(2),
phase3(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of each phase entry in the table."
::= { isxModularDistSysPowerEntry 1 }
isxModularDistSysPowerKw OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power being supplied by this system output phase. Measured in tenths of kW."
::= { isxModularDistSysPowerEntry 2 }
isxModularDistSysPowerKwhPhaseUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The energy consumed by the load equipment on this system output phase.
This is the total since the date specified in the isxModularDistSysPowerKwhResetDate
OID, and may be cleared using the isxModularDistSysPowerKwhReset OID.
Measured in tenths of kWh."
::= { isxModularDistSysPowerEntry 3 }
-- the isxModularPduIdent group
isxModularPduIdentModelNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the model number of the PDU.
This value is set at the factory."
::= { isxModularPduIdent 1 }
isxModularPduIdentSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the PDU.
This value is set at the factory."
::= { isxModularPduIdent 2 }
isxModularPduIdentDateOfManufacture OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the PDU was manufactured in mm/dd/yyyy format.
This value is set at the factory."
::= { isxModularPduIdent 3 }
isxModularPduIdentMonitorCardSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A character string identifying the serial number of the PDU monitor card.
This value is set at the factory."
::= { isxModularPduIdent 4 }
isxModularPduIdentMonitorCardHardwareRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision of the PDU monitor card.
This value is set at the factory."
::= { isxModularPduIdent 5 }
isxModularPduIdentMonitorCardFirmwareAppRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application firmware revision of the
PDU monitor card."
::= { isxModularPduIdent 6 }
isxModularPduIdentMonitorCardFirmwareAppOSRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ID string identifying the application operating system firmware revision of the
PDU monitor card."
::= { isxModularPduIdent 7 }
-- the isxModularPduDevice group
isxModularPduDeviceTransformerPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
isoXfmrPresent (2),
autoXfmrPresent (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of transformer present in this PDU."
::= { isxModularPduDevice 1 }
isxModularPduDeviceServiceType OBJECT-TYPE
SYNTAX INTEGER {
threeWire (1),
fourWire (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of utility input to the PDU. Either 3 wires (delta), or 4 wires (wye)."
::= { isxModularPduDevice 2 }
isxModularPduDeviceFansPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
present (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether or not cooling fans are installed in the PDU."
::= { isxModularPduDevice 3 }
isxModularPduDeviceNominalMainInputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal main input voltage to the system. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a
4-wire (wye) service. -1 if main input voltage is not being measured."
::= { isxModularPduDevice 4 }
isxModularPduAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
warning (2),
critical (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The overall status (worst case) of this PDU."
::= { isxModularPduStatus 1 }
isxModularPduTransformerTempStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
overtemp (2),
noTransformerPresent (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the PDU isolation transformer is over temperature."
::= { isxModularPduStatus 2 }
isxModularPduFanStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
failed (2),
noCoolingFansPresent (3),
unknown (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if one or more of the PDU's cooling fans have failed."
::= { isxModularPduStatus 3 }
-- Universal Input / Output (uio)
-- uio Sensor Status Table
uioSensorStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the uioSensorStatusTable."
::= { uioSensor 1 }
uioSensorStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UIOSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting sensor status information."
::= { uioSensor 2 }
uioSensorStatusEntry OBJECT-TYPE
SYNTAX UIOSensorStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit from which to get data."
INDEX { uioSensorStatusPortID, uioSensorStatusSensorID }
::= { uioSensorStatusTable 1 }
UIOSensorStatusEntry ::=
SEQUENCE {
uioSensorStatusPortID INTEGER,
uioSensorStatusSensorID INTEGER,
uioSensorStatusSensorName DisplayString,
uioSensorStatusSensorLocation DisplayString,
uioSensorStatusTemperatureDegF INTEGER,
uioSensorStatusTemperatureDegC INTEGER,
uioSensorStatusHumidity INTEGER,
uioSensorStatusViolationStatus INTEGER,
uioSensorStatusAlarmStatus INTEGER,
uioSensorStatusCommStatus INTEGER
}
uioSensorStatusPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the port to which the sensor is attached."
::= { uioSensorStatusEntry 1 }
uioSensorStatusSensorID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the sensor."
::= { uioSensorStatusEntry 2 }
uioSensorStatusSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor name."
::= { uioSensorStatusEntry 3 }
uioSensorStatusSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the sensor."
::= { uioSensorStatusEntry 4 }
uioSensorStatusTemperatureDegF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor's current temperature reading in degrees Fahrenheit.
-1 indicates an invalid reading due to lost communications."
::= { uioSensorStatusEntry 5 }
uioSensorStatusTemperatureDegC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor's current temperature reading in degrees Celsius.
-1 indicates an invalid reading due to lost communications."
::= { uioSensorStatusEntry 6 }
uioSensorStatusHumidity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sensor's current humidity reading in percent relative
humidity. -1 indicates an invalid reading due to either a
sensor that doesn't read humidity or lost communications."
::= { uioSensorStatusEntry 7 }
uioSensorStatusViolationStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The violation status of the sensor. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of
the specific alarm conditions listed below. The bit will be '1' if
the condition is present, and '0' if the condition is not present.
Bit Hex. Value Description
1 0x0001 Maximum temperature exceeded.
2 0x0002 High temperature exceeded.
3 0x0004 Low temperature exceeded.
4 0x0008 Minimum temperature exceeded.
5 0x0010 Short-term increasing temperature rate exceeded (Not used).
6 0x0020 Short-term decreasing temperature rate exceeded (Not used).
7 0x0040 Long-term increasing temperature rate exceeded (Not used).
8 0x0080 Long-term decreasing temperature rate exceeded (Not used).
9 0x0100 Maximum humidity exceeded.
10 0x0200 High humidity exceeded.
11 0x0400 Low humidity exceeded.
12 0x0800 Minimum humidity exceeded."
::= { uioSensorStatusEntry 8 }
uioSensorStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
uioNormal (1),
uioWarning (2),
uioCritical (3),
sensorStatusNotApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the sensor."
::= { uioSensorStatusEntry 9 }
uioSensorStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
commsOK (2),
commsLost (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the sensor."
::= { uioSensorStatusEntry 10 }
-- uio Sensor Config Table
uioSensorConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the uioSensorConfigTable."
::= { uioSensor 3 }
uioSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UIOSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuring the sensor."
::= { uioSensor 4 }
uioSensorConfigEntry OBJECT-TYPE
SYNTAX UIOSensorConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The sensor from which to get configuration."
INDEX { uioSensorConfigPortID, uioSensorConfigSensorID }
::= { uioSensorConfigTable 1 }
UIOSensorConfigEntry ::=
SEQUENCE {
uioSensorConfigPortID INTEGER,
uioSensorConfigSensorID INTEGER,
uioSensorConfigSensorName DisplayString,
uioSensorConfigSensorLocation DisplayString,
uioSensorConfigMinTemperatureThreshold INTEGER,
uioSensorConfigLowTemperatureThreshold INTEGER,
uioSensorConfigHighTemperatureThreshold INTEGER,
uioSensorConfigMaxTemperatureThreshold INTEGER,
uioSensorConfigTemperatureHysteresis INTEGER,
uioSensorConfigMinTemperatureEnable INTEGER,
uioSensorConfigLowTemperatureEnable INTEGER,
uioSensorConfigHighTemperatureEnable INTEGER,
uioSensorConfigMaxTemperatureEnable INTEGER,
uioSensorConfigMinHumidityThreshold INTEGER,
uioSensorConfigLowHumidityThreshold INTEGER,
uioSensorConfigHighHumidityThreshold INTEGER,
uioSensorConfigMaxHumidityThreshold INTEGER,
uioSensorConfigHumidityHysteresis INTEGER,
uioSensorConfigMinHumidityEnable INTEGER,
uioSensorConfigLowHumidityEnable INTEGER,
uioSensorConfigHighHumidityEnable INTEGER,
uioSensorConfigMaxHumidityEnable INTEGER
}
uioSensorConfigPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the port to which the sensor is attached."
::= { uioSensorConfigEntry 1 }
uioSensorConfigSensorID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the sensor."
::= { uioSensorConfigEntry 2 }
uioSensorConfigSensorName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sensor name."
::= { uioSensorConfigEntry 3 }
uioSensorConfigSensorLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the sensor."
::= { uioSensorConfigEntry 4 }
uioSensorConfigMinTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum (critical) temperature alarm threshold for the
probe in degrees C. Must be lower than the low threshold to
ensure proper sensor alarm behavior."
::= { uioSensorConfigEntry 5 }
uioSensorConfigLowTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low (warning) temperature alarm threshold for the probe
in degrees C. Must be higher than the minimum threshold and
lower than the high threshold to ensure proper sensor alarm
behavior."
::= { uioSensorConfigEntry 6 }
uioSensorConfigHighTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high (warning) temperature alarm threshold for the probe
in degrees C. Must be lower than the maximum threshold and
higher than the low threshold to ensure proper sensor alarm
behavior."
::= { uioSensorConfigEntry 7 }
uioSensorConfigMaxTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum (critical) temperature alarm threshold for the
probe in degrees C. Must be higher than the high threshold
to ensure proper sensor alarm behavior."
::= { uioSensorConfigEntry 8 }
uioSensorConfigTemperatureHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of degrees C beyond the temperature thresholds at
which an active temperature alarm will be cleared. This value
applies to all temperature thresholds."
::= { uioSensorConfigEntry 9 }
uioSensorConfigMinTemperatureEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum temperature alarm enable/disable for the sensor.
1 - disabled
2 - enabled"
::= { uioSensorConfigEntry 10 }
uioSensorConfigLowTemperatureEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low temperature alarm enable/disable for the sensor.
1 - disabled
2 - enabled"
::= { uioSensorConfigEntry 11 }
uioSensorConfigHighTemperatureEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high temperature alarm enable/disable for the sensor.
1 - disabled
2 - enabled"
::= { uioSensorConfigEntry 12 }
uioSensorConfigMaxTemperatureEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum temperature alarm enable/disable for the sensor.
1 - disabled
2 - enabled"
::= { uioSensorConfigEntry 13 }
uioSensorConfigMinHumidityThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum (critical) humidity alarm threshold for the
probe in percent relative humidity. Must be lower than the
low threshold to ensure proper sensor alarm behavior. -1 if
the sensor doesn't read humidity."
::= { uioSensorConfigEntry 14 }
uioSensorConfigLowHumidityThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low (warning) humidity alarm threshold for the probe in
percent relative humidity. Must be higher than the minimum
threshold and lower than the high threshold to ensure proper
sensor alarm behavior. -1 if the sensor doesn't read
humidity."
::= { uioSensorConfigEntry 15 }
uioSensorConfigHighHumidityThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high (warning) humidity alarm threshold for the probe in
percent relative humidity. Must be lower than the maximum
threshold and higher than the low threshold to ensure proper
sensor alarm behavior. -1 if the sensor doesn't read
humidity."
::= { uioSensorConfigEntry 16 }
uioSensorConfigMaxHumidityThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum (critical) humidity alarm threshold for the
probe in percent relative humidity. Must be higher than the
high threshold to ensure proper sensor alarm behavior. -1 if
the sensor doesn't read humidity."
::= { uioSensorConfigEntry 17 }
uioSensorConfigHumidityHysteresis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of percent relative humidity beyond the humidity
thresholds at which an active humidity alarm will be cleared.
This value applies to all humidity thresholds. -1 if the
sensor doesn't read humidity."
::= { uioSensorConfigEntry 18 }
uioSensorConfigMinHumidityEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity)
2 - enabled"
::= { uioSensorConfigEntry 19 }
uioSensorConfigLowHumidityEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The low humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity)
2 - enabled"
::= { uioSensorConfigEntry 20 }
uioSensorConfigHighHumidityEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The high humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity)
2 - enabled"
::= { uioSensorConfigEntry 21 }
uioSensorConfigMaxHumidityEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity)
2 - enabled"
::= { uioSensorConfigEntry 22 }
-- uio Input Contact Status Table
uioInputContactStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the uioInputContactStatusTable."
::= { uioInputContact 1 }
uioInputContactStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UIOInputContactStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting input contact status information."
::= { uioInputContact 2 }
uioInputContactStatusEntry OBJECT-TYPE
SYNTAX UIOInputContactStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contact from which to get data."
INDEX { uioInputContactStatusPortID, uioInputContactStatusContactID }
::= { uioInputContactStatusTable 1 }
UIOInputContactStatusEntry ::=
SEQUENCE {
uioInputContactStatusPortID INTEGER,
uioInputContactStatusContactID INTEGER,
uioInputContactStatusContactName DisplayString,
uioInputContactStatusContactLocation DisplayString,
uioInputContactStatusCurrentState INTEGER,
uioInputContactStatusAlarmStatus INTEGER,
uioInputContactStatusCommStatus INTEGER
}
uioInputContactStatusPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the port to which the input contact is attached."
::= { uioInputContactStatusEntry 1 }
uioInputContactStatusContactID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the input contact on the module."
::= { uioInputContactStatusEntry 2 }
uioInputContactStatusContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input contact name."
::= { uioInputContactStatusEntry 3 }
uioInputContactStatusContactLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the input contact."
::= { uioInputContactStatusEntry 4 }
uioInputContactStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
uioInputClosed (1),
uioInputOpen (2),
uioInputDisabled (3),
inputStateNotApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the input contact. "
::= { uioInputContactStatusEntry 5 }
uioInputContactStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
uioNormal (1),
uioWarning (2),
uioCritical (3),
inputStatusNotApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the input contact."
::= { uioInputContactStatusEntry 6 }
uioInputContactStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
commsOK (2),
commsLost (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the input contact."
::= { uioInputContactStatusEntry 7 }
-- uio Input Contact Config Table
uioInputContactConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the uioInputContactConfigTable."
::= { uioInputContact 3 }
uioInputContactConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UIOInputContactConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuring the input contacts."
::= { uioInputContact 4 }
uioInputContactConfigEntry OBJECT-TYPE
SYNTAX UIOInputContactConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input contact from which to get configuration."
INDEX { uioInputContactConfigPortID, uioInputContactConfigContactID }
::= { uioInputContactConfigTable 1 }
UIOInputContactConfigEntry ::=
SEQUENCE {
uioInputContactConfigPortID INTEGER,
uioInputContactConfigContactID INTEGER,
uioInputContactConfigContactName DisplayString,
uioInputContactConfigContactLocation DisplayString,
uioInputContactConfigEnable INTEGER,
uioInputContactConfigNormalState INTEGER,
uioInputContactConfigSeverity INTEGER
}
uioInputContactConfigPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the port to which the input contact is attached."
::= { uioInputContactConfigEntry 1 }
uioInputContactConfigContactID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the input contact on the module."
::= { uioInputContactConfigEntry 2 }
uioInputContactConfigContactName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The input contact name."
::= { uioInputContactConfigEntry 3 }
uioInputContactConfigContactLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the input contact."
::= { uioInputContactConfigEntry 4 }
uioInputContactConfigEnable OBJECT-TYPE
SYNTAX INTEGER {
uioInputContactDisabled (1),
uioInputContactEnabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable this input contact.
1 - disabled
2 - enabled"
::= { uioInputContactConfigEntry 5 }
uioInputContactConfigNormalState OBJECT-TYPE
SYNTAX INTEGER {
uioInputNormallyOpen (1),
uioInputNormallyClosed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal (non-alarm) state of the input contact.
1 - normally open
2 - normally closed"
::= { uioInputContactConfigEntry 6 }
uioInputContactConfigSeverity OBJECT-TYPE
SYNTAX INTEGER {
uioInputCriticalSeverity (1),
uioInputWarningSeverity (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The severity of the alarm that this input contact will
generate in the abnormal state.
1 - critical severity
2 - warning severity"
::= { uioInputContactConfigEntry 7 }
-- uio Output Relay Status Table
uioOutputRelayStatusTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the uioOutputRelayStatusTable."
::= { uioOutputRelay 1 }
uioOutputRelayStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF UIOOutputRelayStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for getting output relay status information."
::= { uioOutputRelay 2 }
uioOutputRelayStatusEntry OBJECT-TYPE
SYNTAX UIOOutputRelayStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit from which to get data."
INDEX { uioOutputRelayStatusPortID, uioOutputRelayStatusRelayID }
::= { uioOutputRelayStatusTable 1 }
UIOOutputRelayStatusEntry ::=
SEQUENCE {
uioOutputRelayStatusPortID INTEGER,
uioOutputRelayStatusRelayID INTEGER,
uioOutputRelayStatusRelayName DisplayString,
uioOutputRelayStatusRelayLocation DisplayString,
uioOutputRelayStatusCurrentState INTEGER,
uioOutputRelayStatusAlarmStatus INTEGER,
uioOutputRelayStatusCommStatus INTEGER
}
uioOutputRelayStatusPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the port to which the output relay is attached."
::= { uioOutputRelayStatusEntry 1 }
uioOutputRelayStatusRelayID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the output relay on the module."
::= { uioOutputRelayStatusEntry 2 }
uioOutputRelayStatusRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output relay name."
::= { uioOutputRelayStatusEntry 3 }
uioOutputRelayStatusRelayLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The location of the output relay."
::= { uioOutputRelayStatusEntry 4 }
uioOutputRelayStatusCurrentState OBJECT-TYPE
SYNTAX INTEGER {
uioOutputClosed (1),
uioOutputOpen (2),
outputStateNotApplicable (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the output relay."
::= { uioOutputRelayStatusEntry 5 }
uioOutputRelayStatusAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
uioNormal (1),
uioWarning (2),
uioCritical (3),
inputStatusNotApplicable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the output relay."
::= { uioOutputRelayStatusEntry 6 }
uioOutputRelayStatusCommStatus OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
commsOK (2),
commsLost (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The communications status of the output relay."
::= { uioOutputRelayStatusEntry 7 }
-- uio Output Relay Config Table
uioOutputRelayConfigTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the uioOutputRelayConfigTable."
::= { uioOutputRelay 3 }
uioOutputRelayConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UIOOutputRelayConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows for configuring the output relay."
::= { uioOutputRelay 4 }
uioOutputRelayConfigEntry OBJECT-TYPE
SYNTAX UIOOutputRelayConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The unit from which to get configuration."
INDEX { uioOutputRelayConfigPortID, uioOutputRelayConfigRelayID }
::= { uioOutputRelayConfigTable 1 }
UIOOutputRelayConfigEntry ::=
SEQUENCE {
uioOutputRelayConfigPortID INTEGER,
uioOutputRelayConfigRelayID INTEGER,
uioOutputRelayConfigRelayName DisplayString,
uioOutputRelayConfigRelayLocation DisplayString,
uioOutputRelayConfigNormalState INTEGER,
uioOutputRelayConfigControlState INTEGER,
uioOutputRelayConfigDelay TimeTicks,
uioOutputRelayConfigHold TimeTicks
}
uioOutputRelayConfigPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the port to which the output relay is attached."
::= { uioOutputRelayConfigEntry 1 }
uioOutputRelayConfigRelayID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the output relay on the module."
::= { uioOutputRelayConfigEntry 2 }
uioOutputRelayConfigRelayName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The output relay name."
::= { uioOutputRelayConfigEntry 3 }
uioOutputRelayConfigRelayLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The location of the output relay."
::= { uioOutputRelayConfigEntry 4 }
uioOutputRelayConfigNormalState OBJECT-TYPE
SYNTAX INTEGER {
uioOutputNormallyOpen (1),
uioOutputNormallyClosed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The normal state of the output relay.
1 - normally open
2 - normally closed"
::= { uioOutputRelayConfigEntry 5 }
uioOutputRelayConfigControlState OBJECT-TYPE
SYNTAX INTEGER {
uioOutputClose (1),
uioOutputOpen (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Close or open the output relay for testing purposes. Always
returns 1 when read.
1 - close output relay
2 - open output relay"
::= { uioOutputRelayConfigEntry 6 }
uioOutputRelayConfigDelay OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time a selected alarm condition must exist before the
output relay is activated. Valid values are whole seconds
from 0 to 65535."
::= { uioOutputRelayConfigEntry 7 }
uioOutputRelayConfigHold OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum time the output relay remains activated after the
alarm occurs. Valid values are whole seconds from 0 to 65535."
::= { uioOutputRelayConfigEntry 8 }
-- Traps
-- Annotations are provided for Novell's NMS product
--
-- Each trap has at least one variable (mtrapargsString) which always appears
-- as the last variable in the list. This variable contains either a static
-- or dynamically-constructed string which provides an enhanced description of
-- the trap's purpose and any pertinent information about the trap.
communicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Communication to the UPS has been lost. Steps
to reestablish communication are in progress."
--#TYPE "APC UPS: Communication lost"
--#SUMMARY "Communication lost between the agent and the UPS."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 1
upsOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: The UPS has sensed a load greater than 100 percent
of its rated capacity."
--#TYPE "APC UPS: Overload"
--#SUMMARY "The UPS has sensed a load greater than 100 percent of its rated capacity."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 2
upsDiagnosticsFailed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: The UPS failed its internal diagnostic self-test."
--#TYPE "APC UPS: Failed self-test"
--#SUMMARY "The UPS has failed its internal self-test."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 3
upsDischarged TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: The UPS batteries are discharged; if utility power fails
an immediate low battery condition will exist. Sufficient runtime
for necessary action cannot be guaranteed."
--#TYPE "APC UPS: batteries are discharged"
--#SUMMARY "The UPS batteries are discharged."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 4
upsOnBattery TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS has switched to battery backup power."
--#TYPE "APC UPS: On battery"
--#SUMMARY "The UPS has switched to battery backup power."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 5
smartBoostOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS has enabled SmartBoost(TM)."
--#TYPE "APC UPS: SmartBoost(TM)"
--#SUMMARY "The UPS has enabled SmartBoost(TM); low incoming line voltage."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 6
lowBattery TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: The UPS batteries are low and will soon be exhausted.
If utility power is not restored the UPS will put itself
to 'sleep' and immediately cut power to the load."
--#TYPE "APC UPS: Low battery"
--#SUMMARY "The UPS system's batteries are low and will soon be exhausted."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 7
communicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication with the UPS has been established."
--#TYPE "APC UPS: Communication established"
--#SUMMARY "UPS communication has been established."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 8
powerRestored TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Utility power has been restored."
--#TYPE "APC UPS: Utility power restored"
--#SUMMARY "Returned from battery backup power; utility power restored."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 9
upsDiagnosticsPassed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS passed its internal self-test."
--#TYPE "APC UPS: Passed self-test"
--#SUMMARY "The UPS passed internal self-test."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 10
returnFromLowBattery TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS has returned from a low battery
condition."
--#TYPE "APC UPS: Returned from Low-Battery condition"
--#SUMMARY "The UPS has returned from a Low-Battery condition."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 11
upsTurnedOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS has been turned 'off' by the management station."
--#TYPE "APC UPS: Turned off"
--#SUMMARY "The UPS has been switched off by a management station."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 12
upsSleeping TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS is entering 'sleep' mode. Power
to the load will be cut off."
--#TYPE "APC UPS: Entered sleep mode"
--#SUMMARY "The UPS entered sleep mode. Power to the load will be cut off."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 13
upsWokeUp TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATION: The UPS has returned from 'sleep' mode. Power
to the load has been restored."
--#TYPE "APC UPS: Wake up"
--#SUMMARY "The UPS has returned from sleep mode. Power to the load has been restored."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 14
upsRebootStarted TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS has started its reboot sequence.
The UPS will reboot itself at this time."
--#TYPE "APC UPS: Starting reboot"
--#SUMMARY "The UPS has started its reboot sequence."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 15
upsDipSwitchChanged TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The dip switch settings on the UPS have been
changed, possibly altering UPS performance."
--#TYPE "APC UPS: DIP switch altered"
--#SUMMARY "The DIP switch settings on the UPS have been changed."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 16
upsBatteryNeedsReplacement TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: The batteries of the UPS need immediate replacement."
--#TYPE "APC UPS: UPS batteries need replacement"
--#SUMMARY "The UPS batteries require immediate replacement."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 17
-- the Environmental Monitor traps
contactFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: One of the contacts on the Environmental Monitor has
changed from its default position. The first variable is
the contact number that is faulted."
--#TYPE "APC Environment: Contact fault"
--#SUMMARY "An Environment contact closure has faulted."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 18
contactFaultResolved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A fault on one of the Environmental Monitor contacts
has been resolved. The first variable is
the contact number that has been resolved."
--#TYPE "APC Environment: Contact fault cleared."
--#SUMMARY "A Environment contact closure has returned to it's default state."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 19
-- the Matrix-UPS traps
hardwareFailureBypass TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: UPS on bypass due to internal fault"
--#TYPE "APC UPS: On bypass due to internal fault"
--#SUMMARY "The UPS is on bypass due to an internal fault."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 20
softwareBypass TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: UPS on bypass - user set via software or panel"
--#TYPE "APC UPS: On bypass by user via software or panel"
--#SUMMARY "UPS put on bypass by user via software or front UPS panel."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 21
switchedBypass TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: UPS on bypass - initiated by user"
--#TYPE "APC UPS: On bypass initiated by user"
--#SUMMARY "UPS put on bypass by user."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 22
returnFromBypass TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS has returned from bypass"
--#TYPE "APC UPS: UPS has returned from bypass"
--#SUMMARY "The UPS has returned from bypass mode."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 23
bypassPowerSupplyFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Base module bypass power supply needs repair"
--#TYPE "APC UPS: Base module bypass power supply needs repair"
--#SUMMARY "The base module bypass power supply needs repair."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 24
baseFanFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Base module fan needs repair"
--#TYPE "APC UPS: Base module fan needs repair"
--#SUMMARY "The base module fan needs repair."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 25
batteryPackCommLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Check installation of external battery packs signal cable"
--#TYPE "APC UPS: Communication lost with battery packs"
--#SUMMARY "Communication lost with external battery packs, check battery signal cable."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 26
batteryPackCommEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS is communicating with the external battery packs."
--#TYPE "APC UPS: Communication established with battery packs"
--#SUMMARY "Communication established with external battery packs."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 27
calibrationStart TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A battery calibration test has been initiated on the UPS."
--#TYPE "APC UPS: Calibration initiated"
--#SUMMARY "A battery run time calibration test has been initiated."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 28
-- Misc. Traps
restartAgent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Agent restarting as commanded by manager."
--#TYPE "APC SNMP Agent: Agent restarting"
--#SUMMARY "Agent restarting as commanded by manager."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 29
upsTurnedOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A UPS is turned on."
--#TYPE "APC UPS: A UPS is turned on."
--#SUMMARY " A UPS is turned on."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 30
smartAvrReducing TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS is reducing the line voltage via SmartTrim(TM)."
--#TYPE "APC UPS: SmartTrim(TM) reducing"
--#SUMMARY "The UPS has enabled SmartTrim(TM) voltage reduction."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 31
codeAuthenticationDone TRAP-TYPE
ENTERPRISE apc
VARIABLES { mconfigTFTPServerIP, newCodeAuthentViaTFTP }
DESCRIPTION
"INFORMATIONAL: Authentication on agent code image is done."
--#TYPE "APC CODE: Authentication on agent code image is done."
--#SUMMARY "Authentication on agent code image is done."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 32
upsOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The overload condition has been cleared."
--#TYPE "APC UPS: Overload cleared."
--#SUMMARY "The overload condition has been cleared. ."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 33
smartBoostOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS has returned from SmartBoost(TM)."
--#TYPE "APC UPS: SmartBoost(TM) off."
--#SUMMARY "The UPS has returned from SmartBoost(TM)."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 34
smartAvrReducingOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS has returned from SmartTrim(TM)."
--#TYPE "APC UPS: SmartTrim(TM) reducing off"
--#SUMMARY "The UPS has returned from SmartTrim(TM) voltage reduction."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 35
upsBatteryReplaced TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A bad battery fault has been cleared."
--#TYPE "APC UPS: Bad battery replaced"
--#SUMMARY "The UPS has returned from a bad battery fault."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 36
calibrationEnd TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS has finished calibrating."
--#TYPE "APC UPS: Calibration end"
--#SUMMARY "The UPS has finished calibrating"
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 37
dischargeCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A UPS discharge condition has been cleared."
--#TYPE "APC UPS: Discharge cleared."
--#SUMMARY "The UPS discharge condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 38
gracefulShutdown TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A graceful shutdown has been initiated."
--#TYPE "APC UPS: A graceful shutdown has been initiated."
--#SUMMARY "A graceful shutdown has been initiated."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 39
outletOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUOutletControlIndex }
DESCRIPTION
"WARNING: The specified PDU outlet has turned on.
If sPDUOutletControlIndex equals zero, then all outlets have
turned on."
--#TYPE "APC PDU: Outlet has been turned on."
--#SUMMARY "Outlet has been turned on"
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 41
outletOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUOutletControlIndex }
DESCRIPTION
"WARNING: The specified PDU outlet has turned off.
If sPDUOutletControlIndex equals zero, then all outlets
have turned off."
--#TYPE "APC PDU: Outlet has turned off."
--#SUMMARY "Outlet has turned off."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 42
outletReboot TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUOutletControlIndex }
DESCRIPTION
"WARNING: The specified PDU outlet has rebooted.
If sPDUOutletControlIndex equals zero, then all outlets
have rebooted."
--#TYPE "APC PDU: Outlet has rebooted."
--#SUMMARY "Outlet has rebooted."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 43
configChangeSNMP TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The SNMP configuration has been changed."
--#TYPE "APC: The SNMP configuration has been changed."
--#SUMMARY "The SNMP configuration has been changed."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 44
configChangeOutlet TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUOutletConfigIndex }
DESCRIPTION
"WARNING: The specified PDU outlet has changed configuration.
If sPDUOutletConfigIndex equals zero, then the Master outlet
has changed configuration."
--#TYPE "APC PDU: Outlet configuration has been changed."
--#SUMMARY "Outlet configuration has been changed."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 45
accessViolationConsole TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Someone has attempted to login via the console with the incorrect password."
--#TYPE "APC: Access violation via the console."
--#SUMMARY "Three unsuccessful logins have been attempted via the console."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 46
accessViolationHTTP TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Someone has attempted to login via HTTP with the incorrect password."
--#TYPE "APC: Access violation via HTTP."
--#SUMMARY "An unsuccessful attempt to login via HTTP."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 47
passwordChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The password for the device has been changed."
--#TYPE "APC: Password change for the device."
--#SUMMARY "Someone has changed the password on the device."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 48
badVoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The output voltage is not within acceptable range."
--#TYPE "APC UPS: Bad output voltage."
--#SUMMARY "The output voltage is not within acceptable range."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 49
badVoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The output voltage has returned to an acceptable level."
--#TYPE "APC UPS: The bad voltage output condition has been cleared."
--#SUMMARY "The output voltage has returned to an acceptable level."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 50
chargerFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The battery charger has failed."
--#TYPE "APC UPS: The battery charger has failed."
--#SUMMARY "The battery charger has failed."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 51
chargerFailureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The battery charger failure condition has been cleared."
--#TYPE "APC UPS: The battery charger failure condition cleared"
--#SUMMARY "The battery charger failure condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 52
batteryOverTemperature TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The battery temperature threshold has been violated."
--#TYPE "APC UPS: The battery temperature threshold has been violated."
--#SUMMARY "The battery temperature threshold has been violated."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 53
batteryOverTemperatureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The battery over temperature has been cleared."
--#TYPE "APC UPS: The battery over temperature has been cleared."
--#SUMMARY "The battery over temperature has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 54
smartRelayFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: SmartBoost(TM) or SmartTrim(TM) relay fault."
--#TYPE "APC UPS: SmartBoost(TM) or SmartTrim(TM) relay fault."
--#SUMMARY "SmartBoost(TM) or SmartTrim(TM) relay fault."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 55
smartRelayFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: SmartBoost(TM) or SmartTrim(TM) relay fault has been cleared."
--#TYPE "APC UPS: SmartBoost(TM) or SmartTrim(TM) relay fault cleared."
--#SUMMARY "SmartBoost(TM) or SmartTrim(TM) relay fault has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 56
humidityThresholdViolation1 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Probe 1 humidity threshold violated. The
first variable is the current humidity."
--#TYPE "APC Environmental Monitor: Probe 1 humidity threshold violation"
--#SUMMARY "A humidity threshold has been violated on probe 1."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 57
humidityThresholdViolationCleared1 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Environmental Monitor humidity threshold violation has been cleared on probe 1."
--#TYPE "APC Environmental Monitor: Probe 1 humidity violation cleared"
--#SUMMARY "A humidity threshold violation has been cleared on probe 1."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 58
temperatureThresholdViolation1 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: An Environmental Monitor temperature threshold has been violated on probe 1.
The first variable is the current temperature."
--#TYPE "APC Environmental Monitor: Probe 1 temperature violation"
--#SUMMARY "A temperature threshold has been violated on probe 1."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 59
temperatureThresholdViolationCleared1 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Environmental Monitor temperature threshold violation has been cleared on probe 1."
--#TYPE "APC Environmental Monitor: Probe 1 temperature violation cleared"
--#SUMMARY "A temperature threshold violation has been cleared on probe 1."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 60
humidityThresholdViolation2 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: An Environmental Monitor humidity threshold has been violated on probe 2.
The first variable is the current humidity."
--#TYPE "APC Environmental Monitor: Probe 2 humidity violation"
--#SUMMARY "A humidity threshold has been violated on probe 2."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 61
humidityThresholdViolationCleared2 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Environmental Monitor humidity threshold violation has been cleared on probe 2."
--#TYPE "APC Environmental Monitor: Probe 2 humidity violation cleared"
--#SUMMARY "A humidity threshold violation has been cleared on probe 2."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 62
temperatureThresholdViolation2 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: An Environmental Monitor temperature threshold has been violated on probe 2.
The first variable is the current temperature."
--#TYPE "APC Environmental Monitor: Probe 2 temperature violation"
--#SUMMARY "A temperature threshold has been violated on probe 2."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 63
temperatureThresholdViolationCleared2 TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Environmental Monitor temperature threshold violation has been cleared on probe 2."
--#TYPE "APC Environmental Monitor: Probe 2 temperature violation cleared"
--#SUMMARY "A temperature threshold violation has been cleared on probe 2."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 64
mupsCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication with the Environmental Monitor has been established."
--#TYPE "APC Environmental Monitor: Communication established"
--#SUMMARY "Communication established between the agent and the Environmental Monitor."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 65
mupsCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Communication to the Environmental Monitor has been lost. Steps
to reestablish communication are in progress."
--#TYPE "APC Environmental Monitor: Communication failure"
--#SUMMARY "Communication lost between the agent and the Environmental Monitor."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 66
batteryIncrease TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The number of batteries has increased."
--#TYPE "APC UPS: The number of batteries has increased."
--#SUMMARY "The number of batteries has increased."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 67
batteryDecrease TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The number of batteries has decreased."
--#TYPE "APC UPS: The number of batteries has decreased."
--#SUMMARY "The number of batteries has decreased."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 68
powerModuleIncrease TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The number of power modules has increased."
--#TYPE "APC UPS: The number of power modules has increased."
--#SUMMARY "The number of power modules has increased."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 69
powerModuleDecrease TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The number of power modules has decreased."
--#TYPE "APC UPS: The number of power modules has decreased."
--#SUMMARY "The number of power modules has decreased."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 70
intelligenceModuleInserted TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An intelligence module has been inserted."
--#TYPE "APC UPS: An intelligence module has been inserted."
--#SUMMARY "An intelligence module has been inserted."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 71
intelligenceModuleRemoved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An intelligence module has been removed."
--#TYPE "APC UPS: An intelligence module has been removed."
--#SUMMARY "An intelligence module has been removed."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 72
rintelligenceModuleInserted TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A redundant intelligence module has been inserted."
--#TYPE "APC UPS: A redundant intelligence module has been inserted."
--#SUMMARY "A redundant intelligence module has been inserted."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 73
rintelligenceModuleRemoved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A redundant intelligence module has been removed."
--#TYPE "APC UPS: A redundant intelligence module has been removed."
--#SUMMARY "A redundant intelligence module has been removed."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 74
extBatteryFrameIncease TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An external battery frame has been added."
--#TYPE "APC UPS: An external battery frame has been added."
--#SUMMARY "An external battery frame has been added."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 75
extBatteryFrameDecrease TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An external battery frame has been removed."
--#TYPE "APC UPS: An external battery frame has been removed."
--#SUMMARY "An external battery frame has been removed."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 76
abnormalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: An abnormal condition has been detected.
The first variable is the fault condition."
--#TYPE "APC: An abnormal condition has been detected."
--#SUMMARY "An abnormal condition has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 77
abnormalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An abnormal condition has been cleared.
The first variable is the fault condition."
--#TYPE "APC: An abnormal condition has been cleared."
--#SUMMARY "An abnormal condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 78
deviceStatusChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString}
DESCRIPTION
"INFORMATIONAL: The status of the device being monitored has changed."
--#TYPE "APC : The status of the device being monitored has changed."
--#SUMMARY "The status of the device being monitored has changed."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 79
noBatteries TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The UPS has no batteries attached."
--#TYPE "APC UPS: No batteries attached."
--#SUMMARY "The UPS has no batteries attached."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 80
noBatteriesCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS's batteries have been attached."
--#TYPE "APC UPS: The no batteries attached condition has been cleared."
--#SUMMARY "The UPS's batteries have been attached."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 81
userAdded TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A new user has been added."
--#TYPE "APC: A new user has been added."
--#SUMMARY "A new user has been added."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 82
userDeleted TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A user has been deleted."
--#TYPE "APC: A user has been deleted."
--#SUMMARY "A user has been deleted."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 83
userModified TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A user has been modified."
--#TYPE "APC: A user has been modified."
--#SUMMARY "A user has been modified."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 84
-- MasterSwitch Vm Traps
msvmCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communications with the MasterSwitch VM has been established."
--#TYPE "APC: Communications established with the MasterSwitch VM."
--#SUMMARY "Communications with the MasterSwitch VM has been established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 85
msvmCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"SEVERE: Communications with the MasterSwitch VM has been lost."
--#TYPE "APC: Communications lost with the MasterSwitch VM."
--#SUMMARY "Communications with the MasterSwitch VM has been lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 86
msvmOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"SEVERE: The MasterSwitch VM in an overload condition."
--#TYPE "APC: The MasterSwitch VM is near or at an overload condition."
--#SUMMARY "The MasterSwitch VM is near or at an overload condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 87
msvmOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The overload condition on the MasterSwitch VM has been cleared."
--#TYPE "APC: The overload condition cleared on the MasterSwitch VM."
--#SUMMARY "The overload condition on the MasterSwitch VM has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 88
msvmOutletOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName,
sPDUOutletControlVMOutletIndex, sPDUOutletControlVMOutletName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on the MasterSwitch VM has turned on."
--#TYPE "APC: An outlet on the MasterSwitch VM has turned on."
--#SUMMARY "An outlet on the MasterSwitch VM has turned on."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 89
msvmOutletOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName,
sPDUOutletControlVMOutletIndex, sPDUOutletControlVMOutletName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on the MasterSwitch VM has turned off."
--#TYPE "APC: An outlet on the MasterSwitch VM has turned off."
--#SUMMARY "An outlet on the MasterSwitch VM has turned off."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 90
msvmDeviceConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A device configuration change has been made on a MasterSwitch VM."
--#TYPE "APC: A device configuration change on a MasterSwitch VM."
--#SUMMARY "A device configuration change has been made on a MasterSwitch VM."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 91
msvmOutletConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName,
sPDUOutletControlVMOutletIndex, sPDUOutletControlVMOutletName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet configuration change has been made on a MasterSwitch VM."
--#TYPE "APC: An outlet configuration change on a MasterSwitch VM."
--#SUMMARY "An outlet configuration change has been made on a MasterSwitch VM."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 92
msvmLowLoad TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The MasterSwitch VM has violated the low load threshold."
--#TYPE "APC: The MasterSwitch VM has violated the low load threshold."
--#SUMMARY "The MasterSwitch VM has violated the low load threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 93
msvmLowLoadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The low load condition on the MasterSwitch VM has been cleared."
--#TYPE "APC: The low load condition cleared on the MasterSwitch VM."
--#SUMMARY "The low load condition on the MasterSwitch VM has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 94
msvmNearOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"SEVERE: The MasterSwitch VM is approaching an overload condition."
--#TYPE "APC: The MasterSwitch VM is near or at an overload condition."
--#SUMMARY "The MasterSwitch VM is near or at an overload condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 95
msvmNearOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The near overload condition on the MasterSwitch VM has been cleared."
--#TYPE "APC: The overload condition cleared on the MasterSwitch VM."
--#SUMMARY "The overload condition on the MasterSwitch VM has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 96
msvmPowerSupplyStatusChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: The power supply status of the MasterSwitch VM has changed."
--#TYPE "APC: The power supply status changed on MasterSwitch VM"
--#SUMMARY "The power supply status of the MasterSwitch VM has changed."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 97
-- MasterSwitch plus (MSP) Traps
mspCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communications with the MasterSwitch plus has been established."
--#TYPE "APC: Communications established with the MasterSwitch plus."
--#SUMMARY "Communications with the MasterSwitch plus has been established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 98
mspCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, mtrapargsString }
DESCRIPTION
"SEVERE: Communications with the MasterSwitch plus has been lost."
--#TYPE "APC: Communications lost with the MasterSwitch plus."
--#SUMMARY "Communications with the MasterSwitch plus has been lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 99
mspOutletOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName,
sPDUOutletControlMSPOutletIndex, sPDUOutletControlMSPOutletName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on the MasterSwitch plus has turned on."
--#TYPE "APC: An outlet on the MasterSwitch plus has turned on."
--#SUMMARY "An outlet on the MasterSwitch plus has turned on."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 100
mspOutletOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName,
sPDUOutletControlMSPOutletIndex, sPDUOutletControlMSPOutletName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on the MasterSwitch plus has turned off."
--#TYPE "APC: An outlet on the MasterSwitch plus has turned off."
--#SUMMARY "An outlet on the MasterSwitch plus has turned off."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 101
mspDeviceConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A device configuration change has been made on a MasterSwitch plus."
--#TYPE "APC: A device configuration change on a MasterSwitch plus."
--#SUMMARY "A device configuration change has been made on a MasterSwitch plus."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 102
mspOutletConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, sPDUOutletControlMSPOutletIndex, sPDUOutletControlMSPOutletName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet configuration change has been made on a MasterSwitch plus."
--#TYPE "APC: An outlet configuration change on a MasterSwitch plus."
--#SUMMARY "An outlet configuration change has been made on a MasterSwitch plus."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 103
rsSourceSwitched TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger02, mtrapargsString03, mtrapargsInteger, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The Redundant Switch has switched source.
The first variable is an integer representing the current source: 0=A, 1=B.
The second variable is the 32-character name of the current source.
The third variable is an integer representing the transfer cause:
0=No Transfers Recorded, 1=Due to user action or preferred switching,
3=Due to line notch or spike, 5=Due to low line voltage,
7=Transfer due to high line voltage,
9=Transfer due to frequency out of range.
The fourth variable is a character string listing the transfer cause."
--#TYPE "APC Redundant Switch: The Redundant Switch has switched source"
--#SUMMARY "The Redundant Switch has switched source."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 104
rsLostRedundancy TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: The Redundant Switch has lost redundancy.
The first variable is an integer representing the source which is no longer available: 0=A, 1=B.
The second variable is the 32-character name of the source which is no longer available."
--#TYPE "APC Redundant Switch: The Redundant Switch has lost redundancy"
--#SUMMARY "The Redundant Switch has lost redundancy."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 105
rsRedundancyRestored TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Redundancy has been restored to the Redundant Switch .
The first variable is an integer representing the source which has been restored: 0=A, 1=B.
The second variable is the 32-character name of the source which has been restored."
--#TYPE "APC Redundant Switch: Redundancy has been restored."
--#SUMMARY "Redundancy has been restored to the Redundant Switch ."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 106
rsConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A configuration change has been made on a Redundant Switch."
--#TYPE "APC: A configuration change on a Redundant Switch."
--#SUMMARY "A configuration change has been made on a Redundant Switch."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 107
rsCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communications with the Redundant Switch has been established."
--#TYPE "APC: Communications established with the Redundant Switch."
--#SUMMARY "Communications with the Redundant Switch has been established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 108
rsCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Communications with the Redundant Switch has been lost."
--#TYPE "APC: Communications lost with the Redundant Switch."
--#SUMMARY "Communications with the Redundant Switch has been lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 109
dcCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communications with the DC power plant has been established."
--#TYPE "APC: Communications established with the DC power plant."
--#SUMMARY "Communications with the DC power plant has been established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 110
dcCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Communications with the DC power plant has been lost."
--#TYPE "APC: Communications lost with the DC power plant."
--#SUMMARY "Communications with the DC power plant has been lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 111
dcPINChanged TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The active PIN on the DC controller has been changed."
--#TYPE "APC: The active PIN on the DC controller has been changed."
--#SUMMARY "The active PIN on the DC controller has been changed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 112
dcMajorAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: A Major alarm is active in the DC power plant."
--#TYPE "APC: A Major alarm is active in the DC power plant."
--#SUMMARY "A Major alarm is active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 113
dcMajorAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Major alarm is no longer active in the DC power plant."
--#TYPE "APC: A Major alarm is no longer active in the DC power plant."
--#SUMMARY "A Major alarm is no longer active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 114
dcMinorAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Minor alarm is active in the DC power plant."
--#TYPE "APC: A Minor alarm is active in the DC power plant."
--#SUMMARY "A Minor alarm is active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 115
dcMinorAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Minor alarm is no longer active in the DC power plant."
--#TYPE "APC: A Minor alarm is no longer active in the DC power plant."
--#SUMMARY "A Minor alarm is no longer active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 116
dcOutputRelayOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { dm3StatusOutRlyIndex, dm3StatusOutRlyName, mtrapargsString }
DESCRIPTION
"WARNING: An output relay for the powerplant has been activated (state changed to on).
The first variable is an integer representing the output relay number that has gone on.
The second variable is the 16-character name of the output relay."
--#TYPE "APC: An output relay has gone on."
--#SUMMARY "An output relay has gone on in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 117
dcOutputRelayOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { dm3StatusOutRlyIndex, dm3StatusOutRlyName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An output relay for the powerplant has been deactivated (state changed to off).
The first variable is an integer representing the output relay number that has gone off.
The second variable is the 16-character name of the output relay."
--#TYPE "APC: An output relay has gone off."
--#SUMMARY "An output relay has gone off in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 118
dcInputRelayOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { dm3StatusInRlyIndex, dm3StatusInRlyName, mtrapargsString }
DESCRIPTION
"WARNING: An input relay for the powerplant has been activated (state changed to on).
The first variable is an integer representing the input relay number that has gone on.
The second variable is the 16-character name of the input relay."
--#TYPE "APC: An input relay has gone on."
--#SUMMARY "An input relay has gone on in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 119
dcInputRelayOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { dm3StatusInRlyIndex, dm3StatusInRlyName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An input relay for the powerplant has been deactivated (state changed to off).
The first variable is an integer representing the input relay number that has gone off.
The second variable is the 16-character name of the input relay."
--#TYPE "APC: An input relay has gone off."
--#SUMMARY "An input relay has gone off in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 120
logicPowerSuppliesIncreased TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The number of system power supplies has increased."
--#TYPE "APC UPS: The number of system power supplies has increased."
--#SUMMARY "The number of system power supplies has increased."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 121
logicPowerSuppliesDecreased TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The number of system power supplies has decreased."
--#TYPE "APC UPS: The number of system power supplies has decreased."
--#SUMMARY "The number of system power supplies has decreased."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 122
externalSwitchGearClosed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: External Switch Gear closed."
--#TYPE "APC UPS: External Switch Gear closed."
--#SUMMARY "External Switch Gear closed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 123
externalSwitchGearOpened TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: External Switch Gear opened."
--#TYPE "APC UPS: External Switch Gear opened."
--#SUMMARY "External Switch Gear opened."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 124
generalDeviceEvent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: APC Device event."
--#TYPE "APC Device event"
--#SUMMARY "APC Device event."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 125
atsSourceSwitched TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The Automatic Transfer Switch has switched source.
The first variable is an integer representing the current source: 0=A, 1=B.
The second variable is the 32-character name of the current source."
--#TYPE "APC Automatic Transfer Switch: The ATS has switched source"
--#SUMMARY "The Automatic Transfer Switch has switched source."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 126
atsLostRedundancy TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: The Automatic Transfer Switch has lost redundancy.
The first variable is an integer representing the source which is no longer available: 0=A, 1=B.
The second variable is the 32-character name of the source which is no longer available."
--#TYPE "APC Automatic Transfer Switch: The ATS has lost redundancy. "
--#SUMMARY "The Automatic Transfer Switch has lost redundancy."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 127
atsRedundancyRestored TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Redundancy has been restored to the Automatic Transfer Switch .
The first variable is an integer representing the source which has been restored: 0=A, 1=B.
The second variable is the 32-character name of the source which has been restored."
--#TYPE "APC Automatic Transfer Switch: Redundancy has been restored."
--#SUMMARY "Redundancy has been restored to the Automatic Transfer Switch ."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 128
atsConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A configuration change has been made on the Automatic Transfer Switch.
The first variable is an integer representing the configuration setting which changed:
0=Transfer Voltage Range, 1=Sensitivity, 2=Preferred Source
3=Front Panel Lockout, 4=Current Limit, 5=Reset XA Processor,
6=Reset to defaults, 7=Product Name, 8=Nominal Voltage, 9=Nominal Line Frequency,
10=Narrow VRMS, 11=Medium VRMS, 12=Wide VRMS,13=Frequency Deviation,
14=ColdStart ATS, 15=Events Count Cleared, 16=Phase or Bank Threshold. "
--#TYPE "APC Automatic Transfer Switch: ATS configuration changed."
--#SUMMARY "A configuration change has been made on a Automatic Transfer Switch."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 129
atsCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communications with the Automatic Transfer Switch has been established."
--#TYPE "APC Automatic Transfer Switch: Communications established."
--#SUMMARY "Communications with the Automatic Transfer Switch has been established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 130
atsCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Communications with the Automatic Transfer Switch has been lost."
--#TYPE "APC Automatic Transfer Switch: Communications lost."
--#SUMMARY "Communications with the Automatic Transfer Switch has been lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 131
atsOverCurrent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Output Current has exceeded threshold. This is same as atsOverload Trap
for phase or total in case banked units"
--#TYPE "APC Automatic Transfer Switch: Output Current exceeded threshold"
--#SUMMARY "Output Current has exceeded Threshold. "
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 132
atsOverCurrentCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Output Current has returned below threshold.This is same as atsOverloadCleared Trap
for phase or total in case banked units"
--#TYPE "APC Automatic Transfer Switch: Output Current below threshold."
--#SUMMARY "Output Current has returned below threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 133
atsPowerSupplyFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The Automatic Transfer Switch Power Supply has failed.
The first variable is an integer representing the Power Supply which
has failed: 0 = Source A 24V,
1 = 12V,
2 = 5V,
3 = Source B 24V."
--#TYPE "APC Automatic Transfer Switch: The ATS Power Supply has failed."
--#SUMMARY "The Automatic Transfer Switch Power Supply has failed."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 134
atsPowerSupplyFailureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The Automatic Transfer Power Supply Failure Cleared.
The first variable is an integer representing the Power Supply which
has cleared: 0 = Source A 24V,
1 = 12V,
2 = 5V,
3 = Source B 24V."
--#TYPE "APC Automatic Transfer Switch: Power Supply Failure Cleared."
--#SUMMARY "The Automatic Transfer Switch Power Supply Failure Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 135
dcMainsFailAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Mains Fail alarm is active in the DC power plant."
--#TYPE "APC: A Mains Fail alarm is active in the DC power plant."
--#SUMMARY "A Mains Fail alarm is active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 136
dcMainsFailAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Mains Fail alarm is no longer active in the DC power plant."
--#TYPE "APC: Mains Fail alarm is no longer active in the DC power plant."
--#SUMMARY "Mains Fail alarm is no longer active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 137
dcFanFailAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Fan Fail alarm is active in the DC power plant."
--#TYPE "APC: A Fan Fail alarm is active in the DC power plant."
--#SUMMARY "A Fan Fail alarm is active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 138
dcFanFailAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Fan Fail alarm is no longer active in the DC power plant."
--#TYPE "APC: A Fan Fail alarm is no longer active in the DC power plant."
--#SUMMARY "A Fan Fail alarm is no longer active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 139
dcRectifierOvertempAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Rect. Overtemp alarm is active in the power plant."
--#TYPE "APC: Rect. Overtemp alarm is active in the power plant."
--#SUMMARY "Rect. Overtemp alarm is active in the power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 140
dcRectifierOvertempAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Rect. Overtemp alarm is no longer active in the power plant."
--#TYPE "APC: Rect. Overtmp alarm is no longer active in the power plant."
--#SUMMARY "Rect. Overtemp alarm is no longer active in the power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 141
dcCurrentLimitAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Current Limit alarm is active in the power plant."
--#TYPE "APC: A Current Limit alarm is active in the power plant."
--#SUMMARY "A Current Limit alarm is active in the power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 142
dcCurrentLimitAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Current Limit alarm is no longer active in the power plant."
--#TYPE "APC: Current Limit alarm is no longer active in the power plant."
--#SUMMARY "Current Limit alarm is no longer active in the power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 143
dcRectifierFailAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Rect. Fail alarm is active in the power plant."
--#TYPE "APC: A Rect. Fail alarm is active in the power plant."
--#SUMMARY "A Rect. Fail alarm is active in the power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 144
dcRectifierFailAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Rect. Fail alarm is no longer active in the power plant."
--#TYPE "APC: Rect. Fail alarm is no longer active in the power plant."
--#SUMMARY "Rect. Fail alarm is no longer active in the power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 145
dcMultRectFailAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Multiple Rect. Fail alarm is active in the powerplant."
--#TYPE "APC: Multiple Rect. Fail alarm is active in the powerplant."
--#SUMMARY "Multiple Rect. Fail alarm is active in the powerplant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 146
dcMultRectFailAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Multiple Rect Fail alarm is no longer active in the powerplant."
--#TYPE "APC: Multiple Rect Fail alarm is no longer active in powerplant."
--#SUMMARY "Multiple Rect Fail alarm is no longer active in the powerplant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 147
dcBatteryBreakerAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Batt. Breaker alarm is active in the power plant."
--#TYPE "APC: Batt. Breaker alarm is active in the power plant."
--#SUMMARY "Batt. Breaker alarm is active in the power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 148
dcBatteryBreakerAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Batt. Breaker alarm is no longer active in the power plant."
--#TYPE "APC: Batt. Breaker alarm is no longer active in the power plant."
--#SUMMARY "Batt. Breaker alarm is no longer active in the power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 149
dcRectifierOVPAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Rect. OVP alarm is active in the power plant."
--#TYPE "APC: A Rect. OVP alarm is active in the power plant."
--#SUMMARY "A Rect. OVP alarm is active in the power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 150
dcRectifierOVPAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Rect. OVP alarm is no longer active in the power plant."
--#TYPE "APC: A Rect. OVP alarm is no longer active in the power plant."
--#SUMMARY "A Rect. OVP alarm is no longer active in the power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 151
dcLVDImminentAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A LVD Imminent alarm is active in the powerplant."
--#TYPE "APC: A LVD Imminent alarm is active in the powerplant."
--#SUMMARY "A LVD Imminent alarm is active in the powerplant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 152
dcLVDImminentAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A LVD Imminent alarm is no longer active in the powerplant."
--#TYPE "APC: A LVD Imminent alarm is no longer active in the powerplant."
--#SUMMARY "A LVD Imminent alarm is no longer active in the powerplant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 153
dcFuseCBAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Fuse/CB alarm is active in the DC power plant."
--#TYPE "APC: A Fuse/CB alarm is active in the DC power plant."
--#SUMMARY "A Fuse/CB alarm is active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 154
dcFuseCBAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Fuse/CB alarm is no longer active in the DC power plant."
--#TYPE "APC: A Fuse/CB alarm is no longer active in the DC power plant."
--#SUMMARY "A Fuse/CB alarm is no longer active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 155
dcBatteryTestFail TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Battery Test failed in the DC power plant."
--#TYPE "APC: A Battery Test failed in the DC power plant."
--#SUMMARY "A Battery Test failed in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 156
dcTemperatureAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Temperature is active in the power plant."
--#TYPE "APC: A Temperature alarm is active in the power plant."
--#SUMMARY "A Temperature alarm is active in the power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 157
dcTemperatureAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Temperature alarm is no longer active in the power plant."
--#TYPE "APC: A Temperature alarm is no longer active in the power plant."
--#SUMMARY "A Temperature alarm is no longer active in the power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 158
dcHumidityAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A Humidity alarm is active in the DC power plant."
--#TYPE "APC: A Humidity alarm is active in the DC power plant."
--#SUMMARY "A Humidity alarm is active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 159
dcHumidityAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Humidity alarm is no longer active in the DC power plant."
--#TYPE "APC: A Humidity alarm is no longer active in the DC power plant."
--#SUMMARY "A Humidity alarm is no longer active in the DC power plant."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 160
dcBBCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Power plant bridging board communications established."
--#TYPE "APC: Power plant bridging board communications established."
--#SUMMARY "Power plant bridging board communications established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 161
dcBBCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Power plant bridging board communications lost."
--#TYPE "APC: Power plant bridging board communications lost."
--#SUMMARY "Power plant bridging board communications lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 162
iemHighTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeCurrentTemp, iemStatusProbeTempUnits, iemStatusProbeNumber,
iemStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: High temperature threshold violated on Integrated
Environmental Monitor probe. The first variable is the
current temperature. The second variable is the temperature
scale. The third variable is the probe number. The fourth
variable is the probe name."
--#TYPE "APC IEM: High temperature threshold violation."
--#SUMMARY "High temperature threshold violation."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 163
iemHighTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High temperature threshold violated on Integrated
Environmental Monitor probe has been cleared. The first variable
is the probe number. The second variable is the probe name."
--#TYPE "APC IEM: High temperature threshold violation cleared."
--#SUMMARY "High temperature threshold violation has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 164
iemLowTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeCurrentTemp, iemStatusProbeTempUnits, iemStatusProbeNumber,
iemStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Low temperature threshold violated on integrated
probe. The first variable is the current temperature. The
second variable is the temperature scale. The third
variable is the probe number. The fourth variable is the
probe name."
--#TYPE "APC IEM: Low temperature threshold violation."
--#SUMMARY "Low temperature threshold violation."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 165
iemLowTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low temperature threshold violated on integrated
probe has been cleared. The first variable is the probe number.
The second variable is the probe name."
--#TYPE "APC IEM: Low temperature threshold violation cleared."
--#SUMMARY "Low temperature threshold violation has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 166
iemHighHumidThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeCurrentHumid, iemStatusProbeNumber, iemStatusProbeName,
mtrapargsString }
DESCRIPTION
"SEVERE: High humidity threshold violated on integrated
probe. The first variable is the current humidity. The
second variable is the probe number. The third variable
is the probe name."
--#TYPE "APC IEM: High humidity threshold violation."
--#SUMMARY "High humidity threshold violation."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 167
iemHighHumidThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High humidity threshold violated on integrated
probe cleared. The first variable is the probe number. The second
variable is the probe name."
--#TYPE "APC IEM: High humidity threshold violation cleared."
--#SUMMARY "High humidity threshold violation has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 168
iemLowHumidThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeCurrentHumid, iemStatusProbeNumber, iemStatusProbeName,
mtrapargsString }
DESCRIPTION
"SEVERE: Low humidity threshold violated on integrated
probe. The first variable is the current humidity. The
second variable is the probe number. The third variable
is the probe name."
--#TYPE "APC IEM: Low humidity threshold violation."
--#SUMMARY "Low humidity threshold violation."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 169
iemLowHumidThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low humidity threshold violated on integrated
probe cleared. The first variable is the probe number. The second
variable is the probe name."
--#TYPE "APC IEM: Low humidity threshold violation cleared."
--#SUMMARY "Low humidity threshold violation has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 170
iemProbeDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The temperature/humidity probe on the Integrated
Environmental Monitor has been disconnected. This trap is
generated when a probe that has been in communication with
the Environmental Monitor has been disconnected or can no
longer communicate."
--#TYPE "APC IEM: Probe disconnected."
--#SUMMARY "Probe has been disconnected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 171
iemProbeConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The temperature/humidity probe on the Integrated
Environmental Monitor has been connected. This trap is generated
when the Environmental Monitor establishes communication with a
probe that had previously not been connected."
--#TYPE "APC IEM: Probe Connected."
--#SUMMARY "Probe has been connected."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 172
iemContactFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusContactNumber, iemStatusContactName, mtrapargsString }
DESCRIPTION
"SEVERE: There is a contact fault on the Integrated
Environmental Monitor. The first argument is the number
of the contact. The second argument is the name of the
contact."
--#TYPE "APC IEM: Contact fault."
--#SUMMARY "Contact fault."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 173
iemContactFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusContactNumber, iemStatusContactName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The contact fault on the Integrated
Environmental Monitor has been cleared. The first
argument is the number of the contact. The second
argument is the name of the contact."
--#TYPE "APC IEM: Contact fault."
--#SUMMARY "Contact fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 174
iemRelayFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusRelayNumber, iemStatusRelayName, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: The output relay on the Integrated Environmental
Monitor has switched to the fault state. The first
argument is the number of the output relay. The second
argument is the name of the output relay. The third
argument is the event that caused the fault."
--#TYPE "APC IEM: Output relay fault."
--#SUMMARY "Output relay has faulted."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 175
iemRelayFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { iemStatusRelayNumber, iemStatusRelayName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The fault condition on the output relay on the
Integrated Environmental Monitor has cleared. The first
argument is the number of the output relay. The second
argument is the name of the output relay."
--#TYPE "APC IEM: Output relay fault condition cleared."
--#SUMMARY "Output relay fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 176
bmBatManCommEstab TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Serial Communications Established with Battery Manager."
--#TYPE "BatMan : Communications Established."
--#SUMMARY "Communications Established."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 177
bmBatManCommLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Serial Communications Lost with Battery Manager."
--#TYPE "BatMan : Communications Lost."
--#SUMMARY "Communications Lost."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 178
bmBatManKneeAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Battery Voltage Knee Threshold Alarm Detected."
--#TYPE "BatMan : Knee Alarm Detected."
--#SUMMARY "Knee Alarm Detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 179
bmBatManKneeAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Battery Voltage Knee Threshold Alarm Cleared."
--#TYPE "BatMan : Knee Alarm Cleared."
--#SUMMARY "Knee Alarm Cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 180
bmBatManChargerAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Charger Alarm Detected."
--#TYPE "BatMan : Charger Alarm Detected."
--#SUMMARY "Charger Alarm Detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 181
bmBatManChargerAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Charger Alarm Cleared."
--#TYPE "BatMan : Charger Alarm Cleared."
--#SUMMARY "Charger Alarm Cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 182
bmBatManBatteryAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Battery Alarm Detected."
--#TYPE "BatMan : Battery Alarm Detected."
--#SUMMARY "Battery Alarm Detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 183
bmBatManBatteryAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Battery Alarm Cleared."
--#TYPE "BatMan : Battery Alarm Cleared."
--#SUMMARY "Battery Alarm Cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 184
bmBatManEnvironmentAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Environment Alarm Detected."
--#TYPE "BatMan : Environment Alarm Detected."
--#SUMMARY "Environment Alarm Detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 185
bmBatManEnvironmentAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Environment Alarm Cleared."
--#TYPE "BatMan : Environment Alarm Cleared."
--#SUMMARY "Environment Alarm Cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 186
bmBatManMaintenanceAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Maintenance Alarm Detected."
--#TYPE "BatMan : Maintenance Due Alarm Detected."
--#SUMMARY "Maintenance Due Alarm Detected."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 187
bmBatManMaintenanceAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Maintenance Alarm Cleared."
--#TYPE "BatMan : Maintenance Due Alarm Cleared."
--#SUMMARY "Maintenance Due Alarm Cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 188
pduCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication Established.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Communication Established."
--#SUMMARY "Communication Established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 189
pduCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: Communication Lost.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Communication Lost."
--#SUMMARY "Communication Lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 190
pduUtilityLineUndervoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Utility Line Undervoltage.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Utility Line Undervoltage."
--#SUMMARY "Utility Line Undervoltage."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 191
pduUtilityLineUndervoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Utility Line Undervoltage Cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Utility Line Undervoltage Cleared."
--#SUMMARY "Utility Line Undervoltage Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 192
pduUtilityLineOvervoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Utility Line Overvoltage.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Utility Line Overvoltage."
--#SUMMARY "Utility Line Overvoltage."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 193
pduUtilityLineOvervoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Utility Line Overvoltage Cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Utility Line Overvoltage Cleared."
--#SUMMARY "Utility Line Overvoltage Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 194
pduGroundOvercurrent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: Ground Overcurrent.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Ground Overcurrent."
--#SUMMARY "Ground Overcurrent."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 195
pduGroundOvercurrentCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Ground Overcurrent Cleared.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Ground Overcurrent Cleared."
--#SUMMARY "Ground Overcurrent Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 196
pduCircuitPanelInputUndervoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Circuit Panel Input Undervoltage.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Undervoltage."
--#SUMMARY "Circuit Panel Input Undervoltage."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 197
pduCircuitPanelInputUndervoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Circuit Panel Input Undervoltage Cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Undervoltage Cleared."
--#SUMMARY "Circuit Panel Input Undervoltage Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 198
pduCircuitPanelInputOvervoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Circuit Panel Input Overvoltage.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Overvoltage."
--#SUMMARY "Circuit Panel Input Overvoltage."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 199
pduCircuitPanelInputOvervoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Circuit Panel Input Overvoltage Cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Overvoltage Cleared."
--#SUMMARY "Circuit Panel Input Overvoltage Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 200
pduCircuitPanelInputUndercurrent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Circuit Panel Input Undercurrent.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Undercurrent."
--#SUMMARY "Circuit Panel Input Undercurrent."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 201
pduCircuitPanelInputUndercurrentCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Circuit Panel Input Undercurrent Cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Undercurrent Cleared."
--#SUMMARY "Circuit Panel Input Undercurrent Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 202
pduCircuitPanelInputOvercurrent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Circuit Panel Input Overcurrent.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Overcurrent."
--#SUMMARY "Circuit Panel Input Overcurrent."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 203
pduCircuitPanelInputOvercurrentCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Circuit Panel Input Overcurrent Cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: Circuit Panel Input Overcurrent Cleared."
--#SUMMARY "Circuit Panel Input Overcurrent Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 204
pduCircuitPanelFrequencyOutOfRange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: Circuit Panel Input Frequency Out Of Range.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Circuit Panel Input Frequency Out Of Range."
--#SUMMARY "Circuit Panel Input Frequency Out Of Range."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 205
pduCircuitPanelFrequencyOutofRangeCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Circuit Panel Input Frequency No Longer Out Of Range.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Circuit Panel Input Frequency No Longer Out Of Range."
--#SUMMARY "Circuit Panel Input Frequency No Longer Out Of Range."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 206
pduCircuitPanelNeutralOvercurrent TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: Circuit Panel Input Neutral Overcurrent.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Circuit Panel Input Neutral Overcurrent."
--#SUMMARY "Circuit Panel Input Neutral Overcurrent."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 207
pduCircuitPanelNeutralOvercurrentCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Circuit Panel Input Neutral Overcurrent Cleared.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Circuit Panel Input Neutral Overcurrent Cleared."
--#SUMMARY "Circuit Panel Input Neutral Overcurrent Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 208
pduSystemOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: PDU System Off.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: System Off."
--#SUMMARY "PDU System Off."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 209
pduOnBatteryMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: PDU is in On Battery Mode.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: On Battery Mode."
--#SUMMARY "PDU is in On Battery Mode."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 210
pduMaintenanceBypassMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PDU is in Maintenance Bypass Mode.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Maintenance Bypass Mode."
--#SUMMARY "PDU is in Maintenance Bypass Mode."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 211
pduAtypicalBypassMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"WARNING: PDU is in Atypical Bypass Mode.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Atypical Bypass Mode."
--#SUMMARY "PDU is in Atypical Bypass Mode."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 212
pduNoPanelFeedMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: PDU is in No Panel Feed Mode.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: No Panel Feed Mode."
--#SUMMARY "PDU is in No Panel Feed Mode."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 213
pduUpsOperationMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PDU is in Ups Operation Mode.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Ups Operation Mode."
--#SUMMARY "PDU is in Ups Operation Mode."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 214
pduForcedBypassMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"WARNING: PDU is in Forced Bypass Mode.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Forced Bypass Mode."
--#SUMMARY "PDU is in Forced Bypass Mode."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 215
pduInputTransformerOverTemperature TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: Input Transformer Over Temperature.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Input Transformer Over Temperature."
--#SUMMARY "Input Transformer Over Temperature."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 216
pduInputTransformerOverTemperatureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Input Transformer Over Temperature Cleared.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC PDU: Input Transformer Over Temperature Cleared."
--#SUMMARY "Input Transformer Over Temperature Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 217
pduUPSInputVoltageLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: UPS Input Voltage phase-N Lost.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: UPS Input Voltage phase-N Lost."
--#SUMMARY "UPS Input Voltage phase-N Lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 218
pduUPSInputVoltageRestored TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS Input Voltage phase-N Restored.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC PDU: UPS Input Voltage phase-N Restored."
--#SUMMARY "UPS Input Voltage phase-N Restored."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 219
pduContactFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: A contact closure in the PDU is in an abnormal position.
The first argument is the serial number.
The second argument is the device name.
The third argument is the number of the contact."
--#TYPE "APC PDU: Contact Abnormal."
--#SUMMARY "Contact Abnormal."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 220
pduContactFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A contact closure in the PDU is in a normal position.
The first argument is the serial number.
The second argument is the device name.
The third argument is the number of the contact."
--#TYPE "APC PDU: Contact Normal."
--#SUMMARY "Contact Normal."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 221
rPDUBankPhaseLowLoad TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"WARNING: A bank or phase on the Rack PDU has violated the low load threshold.
The first argument is the serial number.
The second argument is the device name.
The third argument is the bank number (0 if this is phase data).
The fourth argument is the phase number (0 if this is bank data)."
--#TYPE "APC Rack PDU: Violation of bank or phase low load threshold."
--#SUMMARY "A bank or phase on the Rack PDU has violated the low load threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 222
rPDUBankPhaseLowLoadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The bank or phase low load condition on a Rack PDU has been
cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the bank number (0 if this is phase data).
The fourth argument is the phase number (0 if this is bank data)."
--#TYPE "APC Rack PDU: Bank or phase low load condition cleared."
--#SUMMARY "The bank or phase low load condition on a Rack PDU has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 223
rPDUBankPhaseNearOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"WARNING: A bank or phase of the Rack PDU is near an overload condition.
The first argument is the serial number.
The second argument is the device name.
The third argument is the bank number (0 if this is phase data).
The fourth argument is the phase number (0 if this is bank data)."
--#TYPE "APC Rack PDU: Bank or phase near an overload condition."
--#SUMMARY "A bank or phase of the Rack PDU is near an overload condition."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 224
rPDUBankPhaseNearOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The bank or phase near overload condition on a Rack PDU has
been cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the bank number (0 if this is phase data).
The fourth argument is the phase number (0 if this is bank data)."
--#TYPE "APC Rack PDU: Bank or phase near overload condition has cleared."
--#SUMMARY "Rack PDU bank or phase near overload condition has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 225
rPDUBankPhaseOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"SEVERE: A bank or phase of the Rack PDU is in an overload condition.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
The third argument is the bank number (0 if this is phase data).
The fourth argument is the phase number (0 if this is bank data)."
--#TYPE "APC Rack PDU: Bank or phase overload condition."
--#SUMMARY "A bank or phase of the Rack PDU is in an overload condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 226
rPDUBankPhaseOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The bank or phase overload condition on a Rack PDU has been
cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the bank number (0 if this is phase data).
The fourth argument is the phase number (0 if this is bank data)."
--#TYPE "APC Rack PDU: Bank or phase overload condition has cleared."
--#SUMMARY "The bank or phase overload condition on a Rack PDU has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 227
aruDeviceConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Remote ARU Device Configuration change.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: ARU Device configuration change."
--#SUMMARY "ARU device configuration change."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 228
rmPDUCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
DESCRIPTION
"SEVERE: Communication Lost.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC RM PDU: Communication Lost."
--#SUMMARY "Communication Lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 229
emsCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication Established.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC EMS: Communication Established."
--#SUMMARY "Communication Established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 230
emsCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"SEVERE: Communication Lost.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC EMS: Communication Lost."
--#SUMMARY "Communication Lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 231
emsProbeConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A probe has been connected to the EMS.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the probe number.
The fourth argument is the probe name."
--#TYPE "APC EMS: Probe Connected."
--#SUMMARY "Probe Connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 232
emsProbeDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: A probe has been disconnected from the EMS.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the probe number.
The fourth argument is the probe name."
--#TYPE "APC EMS: Probe Disconnected."
--#SUMMARY "Probe Disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 233
emsSensorConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A sensor has been connected to the EMS.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the sensor number.
The fourth argument is the sensor name."
--#TYPE "APC EMS: Sensor Connected."
--#SUMMARY "Sensor Connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 234
emsSensorDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
DESCRIPTION
"SEVERE: A sensor has been disconnected from the EMS.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the sensor number.
The fourth argument is the sensor name."
--#TYPE "APC EMS: Sensor Disconnected."
--#SUMMARY "Sensor Disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 235
emsSensorFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
DESCRIPTION
"SEVERE: A EMS sensor is in the fault condition.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the sensor number.
The fourth argument is the sensor name."
--#TYPE "APC EMS: Sensor Fault."
--#SUMMARY "Sensor Fault."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 236
emsSensorFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A EMS sensor fault condition has cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the sensor number.
The fourth argument is the sensor name."
--#TYPE "APC EMS: Sensor Fault Cleared."
--#SUMMARY "Sensor Fault Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 237
emsBeaconConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A beacon has been connected to the EMS.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC EMS: Beacon Connected."
--#SUMMARY "Beacon Connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 238
emsBeaconDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"SEVERE: A beacon has been disconnected from the EMS.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC EMS: Beacon Disconnected."
--#SUMMARY "Beacon Disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 239
emsBeaconOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A EMS beacon has gone on.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC EMS: Beacon On."
--#SUMMARY "Beacon On."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 240
emsBeaconOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A EMS beacon has gone off.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC EMS: Beacon Off."
--#SUMMARY "Beacon Off."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 241
emsMajorAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"SEVERE: A Major Alarm is present in the EMS.
The first argument is the EMS serial number.
The second argument is the EMS name."
--#TYPE "APC EMS: Major Alarm."
--#SUMMARY "Major Alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 242
emsMajorAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Major Alarm condition has been cleared in the EMS.
The first argument is the EMS serial number.
The second argument is the EMS name."
--#TYPE "APC EMS: Major Alarm Cleared."
--#SUMMARY "Major Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 243
emsMinorAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"SEVERE: A Minor Alarm is present in the EMS.
The first argument is the EMS serial number.
The second argument is the EMS name."
--#TYPE "APC EMS: Minor Alarm."
--#SUMMARY "Minor Alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 244
emsMinorAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Minor Alarm condition has been cleared in the EMS.
The first argument is the EMS serial number.
The second argument is the EMS name."
--#TYPE "APC EMS: Minor Alarm Cleared."
--#SUMMARY "Minor Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 245
emsOutletStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutletStatusOutletIndex, emsOutletStatusOutletName,
emsOutletStatusOutletState, emsOutletStatusOutletNormalState, mtrapargsString }
DESCRIPTION
"WARNING: An outlet on the EMS has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the outlet number.
The fourth argument is the outlet name.
The fifth argument is the current outlet state (1=ON, 2=OFF).
The sixth argument is the configured normal outlet state (1=ON, 2=OFF)."
--#TYPE "APC EMS: Outlet has changed to its abnormal state."
--#SUMMARY "Outlet has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 246
emsOutletStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutletStatusOutletIndex, emsOutletStatusOutletName,
emsOutletStatusOutletState, emsOutletStatusOutletNormalState, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on the EMS has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the outlet number.
The fourth argument is the outlet name.
The fifth argument is the current outlet state (1=ON, 2=OFF).
The sixth argument is the configured normal outlet state (1=ON, 2=OFF)."
--#TYPE "APC EMS: Outlet has changed to its normal state."
--#SUMMARY "Outlet has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 247
emsInputContactStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsInputContactStatusInputContactIndex,
emsInputContactStatusInputContactName, emsInputContactStatusInputContactState,
emsInputContactStatusInputContactNormalState, mtrapargsString }
DESCRIPTION
"WARNING: An input contact on the EMS has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the input contact number.
The fourth argument is the input contact name.
The fifth argument is the input contact state (1=CLOSED, 2=OPEN).
The sixth argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC EMS: Input contact has changed to its abnormal state."
--#SUMMARY "Input contact has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 248
emsInputContactStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsInputContactStatusInputContactIndex,
emsInputContactStatusInputContactName, emsInputContactStatusInputContactState,
emsInputContactStatusInputContactNormalState, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An input contact on the EMS has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the input contact number.
The fourth argument is the input contact name.
The fifth argument is the input contact state (1=CLOSED, 2=OPEN).
The sixth argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC EMS: Input contact has changed to its normal state."
--#SUMMARY "Input contact has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 249
emsOutputRelayStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutputRelayStatusOutputRelayIndex,
emsOutputRelayStatusOutputRelayName, emsOutputRelayStatusOutputRelayState,
emsOutputRelayStatusOutputRelayNormalState, mtrapargsString }
DESCRIPTION
"WARNING: An output relay on the EMS has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the output relay number.
The fourth argument is the output relay name.
The fifth argument is the current output relay state (1=CLOSED, 2=OPEN).
The sixth argument is the configured normal output relay state (1=CLOSED, 2=OPEN)."
--#TYPE "APC EMS: Output Relay has changed to its abnormal state."
--#SUMMARY "Output Relay has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 250
emsOutputRelayStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutputRelayStatusOutputRelayIndex,
emsOutputRelayStatusOutputRelayName, emsOutputRelayStatusOutputRelayState,
emsOutputRelayStatusOutputRelayNormalState, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An output relay on the EMS has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the output relay number.
The fourth argument is the output relay name.
The fifth argument is the current output relay state (1=CLOSED, 2=OPEN).
The sixth argument is the configured normal output relay state (1=CLOSED, 2=OPEN)."
--#TYPE "APC EMS: Output Relay has changed to its normal state."
--#SUMMARY "Output Relay has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 251
emsDeviceConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A device configuration change has been made on the EMS.
The first argument is the EMS serial number.
The second argument is the EMS name."
--#TYPE "APC: A device configuration change on a EMS."
--#SUMMARY "A device configuration change has been made on a EMS."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 252
envHighTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: High temperature threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: High temperature threshold violation."
--#SUMMARY "High temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 253
envHighTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High temperature threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: High temperature threshold violation cleared."
--#SUMMARY "High temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 254
envLowTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Low temperature threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Low temperature threshold violation."
--#SUMMARY "Low temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 255
envLowTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low temperature threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Low temperature threshold violation cleared."
--#SUMMARY "Low temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 256
envHighHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: High humidity threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: High humidity threshold violation."
--#SUMMARY "High humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 257
envHighHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High humidity threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity.
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: High humidity threshold violation cleared."
--#SUMMARY "High humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 258
envLowHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Low humidity threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: Low humidity threshold violation."
--#SUMMARY "Low humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 259
envLowHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low humidity threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity.
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: Low humidity threshold violation cleared."
--#SUMMARY "Low humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 260
-- Switched and Metered Rack PDU Traps
rPDUCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication with a Rack PDU has been established.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Communication established."
--#SUMMARY "Communication with a Rack PDU established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 266
rPDUCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"SEVERE: Communication with a Rack PDU has been lost.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Communication lost."
--#SUMMARY "Communication with a Rack PDU has been lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 267
rPDUOutletOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletControlIndex, rPDUOutletControlOutletName,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on a Switched Rack PDU has turned on.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet index number.
The fourth argument is the outlet name."
--#TYPE "APC Switched Rack PDU: An outlet has turned on."
--#SUMMARY "An outlet on a Switched Rack PDU has turned on."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 268
rPDUOutletOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletControlIndex, rPDUOutletControlOutletName,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on a Switched Rack PDU has turned off.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet index number.
The fourth argument is the outlet name."
--#TYPE "APC Switched Rack PDU: An outlet has turned off."
--#SUMMARY "An outlet on a Switched Rack PDU has turned off."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 269
rPDUDeviceConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A device configuration change has been made on a
Rack PDU.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Device configuration change made."
--#SUMMARY "Device configuration change has been made on a Rack PDU."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 270
rPDUOutletConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletControlIndex, rPDUOutletControlOutletName,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet configuration change has been made on a
Switched Rack PDU.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet index number.
The fourth argument is the outlet name."
--#TYPE "APC Switched Rack PDU: Outlet configuration change made."
--#SUMMARY "Outlet configuration change has been made on a Switched Rack PDU."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 271
rPDULowLoad TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"WARNING: A Rack PDU has violated the low load threshold.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC Rack PDU: Violation of low load threshold."
--#SUMMARY "A Rack PDU has violated the low load threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 272
rPDULowLoadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The low load condition on a Rack PDU has been
cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC Rack PDU: Low load condition cleared."
--#SUMMARY "The low load condition on a Rack PDU has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 273
rPDUNearOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"WARNING: A Rack PDU is near an overload condition.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC Rack PDU: Near an overload condition."
--#SUMMARY "A Rack PDU is near an overload condition."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 274
rPDUNearOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The near overload condition on a Rack PDU has
been cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC Rack PDU: Near overload condition has cleared."
--#SUMMARY "Rack PDU near overload condition has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 275
rPDUOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"SEVERE: A Rack PDU is in an overload condition.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC Rack PDU: Overload condition."
--#SUMMARY "A Rack PDU is in an overload condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 276
rPDUOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadStatusPhaseNumber, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The overload condition on a Rack PDU has been
cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number."
--#TYPE "APC Rack PDU: Overload condition has cleared."
--#SUMMARY "The overload condition on a Rack PDU has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 277
rPDUPowerSupply1Fail TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"SEVERE: Power Supply 1 on Rack PDU is in FAIL state.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Power Supply 1 is in FAIL state."
--#SUMMARY "Power Supply 1 on Rack PDU is in FAIL state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 278
rPDUPowerSupply1Ok TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Power Supply 1 on Rack PDU is operating normally.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Power Supply 1 is operating normally."
--#SUMMARY "Power Supply 1 on Rack PDU is operating normally."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 279
rPDUPowerSupply2Fail TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"SEVERE: Power Supply 2 on Rack PDU is in FAIL state.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Power Supply 2 is in FAIL state."
--#SUMMARY "Power Supply 2 on Rack PDU is in FAIL state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 280
rPDUPowerSupply2Ok TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Power Supply 2 on Rack PDU is operating normally.
The first argument is the serial number.
The second argument is the device name."
--#TYPE "APC Rack PDU: Power Supply 2 is operating normally."
--#SUMMARY "Power Supply 2 on Rack PDU is operating normally."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 281
rPDUPhaseConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDULoadPhaseConfigIndex, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A phase configuration change has been made on a
Rack PDU.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase index number."
--#TYPE "APC Rack PDU: Phase configuration change made."
--#SUMMARY "Phase configuration change has been made on a Rack PDU."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 282
rPDUCancelPendingCommand TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletControlIndex, rPDUOutletControlOutletName,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A cancel pending command has been made on a
Switched Rack PDU.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet index number (0 indicates all outlets).
The fourth argument is the outlet name (or device name if all outlets)."
--#TYPE "APC Switched Rack PDU: Cancel Pending Command made."
--#SUMMARY "A Cancel Pending Command has been made on a Switched Rack PDU."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 283
aruAlinkCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Remote ARU Communication Established.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Communication Established."
--#SUMMARY "Communication Established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 284
aruAlinkCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"SEVERE: Remote ARU Communication Lost.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Communication Lost."
--#SUMMARY "Communication Lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 285
aruFanFail TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"SEVERE: Remote ARU Fan Fail.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Fan Failure."
--#SUMMARY "Fan Fail."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 286
aruFanFailCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Remote ARU Fan Fail Cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Fan Fail Cleared."
--#SUMMARY "Fan Fail Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 287
aruSmokeAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"SEVERE: Remote ARU Smoke Alarm.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Smoke Alarm."
--#SUMMARY "Smoke Alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 288
aruSmokeAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Remote ARU Smoke Alarm Cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Smoke Alarm Cleared."
--#SUMMARY "Smoke Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 289
aruHighTemperatureAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"WARNING: ARU Exhaust temperature has exceeded the override
threshold and the ARU has increased fan speed to
maintain a safe environment in the rack.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: High Temperature Alarm."
--#SUMMARY "High Temperature Alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 290
aruHighTemperatureAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: ARU temperature override state has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: High Temperature Alarm Cleared."
--#SUMMARY "High Temperature Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 291
aruExhaustTemperatureAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"SEVERE: ARU Extreme Exhaust Temperature Alarm.
The ARU is unable to control the temperature within the rack
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Exhaust Temperature Alarm."
--#SUMMARY "Exhaust Temperature Alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 292
aruExhaustTemperatureAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Remote ARU Exhaust Temperature Alarm Cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Exhaust Temperature Alarm Cleared."
--#SUMMARY "Exhaust Temperature Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 293
envAlinkCommunicationEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Remote Probe Communication Established.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the probe number.
The fourth argument is the probe name."
--#TYPE "APC ENV: Communication Established."
--#SUMMARY "Communication Established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 294
envAlinkCommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Remote Probe Communication Lost.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the probe number.
The fourth argument is the probe name."
--#TYPE "APC ENV: Communication Lost."
--#SUMMARY "Communication Lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 295
emsAlinkPowerOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"SEVERE: Alink Power Overload.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC EMS: Alink Power Overload."
--#SUMMARY "Alink Power Overload."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 296
emsAlinkPowerOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Alink Power Overload Cleared.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC EMS: Alink Power Overload Cleared."
--#SUMMARY "Alink Power Overload Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 297
upsOutletGroupTurnedOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { upsOutletGroupControlIndex, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The specified Outlet Group turned on."
--#TYPE "APC UPS: Outlet Group turned on."
--#SUMMARY "Outlet Group turned on"
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 298
upsOutletGroupTurnedOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { upsOutletGroupControlIndex, mtrapargsString }
DESCRIPTION
"WARNING: The specified Outlet Group turned off."
--#TYPE "APC UPS: Outlet Group turned off."
--#SUMMARY "Outlet Group turned off."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 299
smwCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsGauge, mtrapargsString }
DESCRIPTION
"SEVERE: A Symmetra MW UPS critical condition has been detected.
The first variable is the fault condition."
--#TYPE "APC Symmetra MW UPS: A critical condition has been detected."
--#SUMMARY "A critical condition has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 300
smwCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsGauge, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Symmetra MW UPS critical condition has been cleared.
The first variable is the fault condition."
--#TYPE "APC Symmetra MW UPS: A critical condition has been cleared."
--#SUMMARY "A critical condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 301
smwWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsGauge, mtrapargsString }
DESCRIPTION
"WARNING: A Symmetra MW UPS warning condition has been detected.
The first variable is the fault condition."
--#TYPE "APC Symmetra MW UPS: A warning condition has been detected."
--#SUMMARY "A warning condition has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 302
smwWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsGauge, mtrapargsString }
DESCRIPTION
"WARNING: A Symmetra MW UPS warning condition has been cleared.
The first variable is the fault condition."
--#TYPE "APC Symmetra MW UPS: A warning condition has been cleared."
--#SUMMARY "A warning condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 303
smwInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsGauge, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Symmetra MW UPS informational condition has been detected.
The first variable is the fault condition."
--#TYPE "APC Symmetra MW UPS: Informational condition detected."
--#SUMMARY "An informational condition has been detected."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 304
smwInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsGauge, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Symmetra MW UPS informational condition has been cleared.
The first variable is the fault condition."
--#TYPE "APC Symmetra MW UPS: Informational condition cleared."
--#SUMMARY "An informational condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 305
airCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: An Air critical condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC Air: A critical condition was detected. "
--#SUMMARY "A critical condition was detected. "
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 306
airCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Air critical condition was cleared.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC Air: A critical condition was cleared. "
--#SUMMARY "A critical condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 307
airWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: An Air warning condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC Air: A warning condition was detected. "
--#SUMMARY "A warning condition was detected. "
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 308
airWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: An Air warning condition was cleared.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC Air: A warning condition was cleared. "
--#SUMMARY "A warning condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 309
airInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Air informational condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC Air: Informational condition detected. "
--#SUMMARY "An informational condition was detected. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 310
airInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An Air informational condition was cleared.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC Air: Informational condition was cleared. "
--#SUMMARY "An informational condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 311
-- xPDU Traps (part 1)
xPDUInputVoltageLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: Three-phase input voltage to the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC XPDU: Main input low voltage alarm."
--#SUMMARY "Input voltage is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 312
xPDUInputVoltageLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Three-phase input voltage to the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XPDU: Main input low voltage alarm cleared."
--#SUMMARY "Main input low voltage cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 313
xPDUInputVoltageHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: Three-phase input voltage to the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, above which the alarm was generated."
--#TYPE "APC XPDU: Main input high voltage alarm."
--#SUMMARY "Main input voltage is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 314
xPDUInputVoltageHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Three-phase input voltage to the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XPDU: Main input high voltage alarm cleared."
--#SUMMARY "Main input high voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 315
xPDUBypassVoltageLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: Three-phase bypass input voltage to the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC XPDU: Bypass input low voltage alarm."
--#SUMMARY "Bypass input voltage is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 316
xPDUBypassVoltageLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Three-phase bypass input voltage to the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XPDU: Bypass input low voltage alarm cleared."
--#SUMMARY "Bypass input low voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 317
xPDUBypassVoltageHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: Three-phase bypass input voltage to the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, above which the alarm was generated."
--#TYPE "APC XPDU: Bypass input high voltage alarm."
--#SUMMARY "Bypass input voltage is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 318
xPDUBypassVoltageHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Three-phase bypass input voltage to the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XPDU: Bypass input high voltage alarm cleared."
--#SUMMARY "Bypass input voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 319
xPDUOutputVoltageLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The three-phase output voltage of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC XPDU: Output low voltage alarm."
--#SUMMARY "Output voltage is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 320
xPDUOutputVoltageLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The three-phase output voltage of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XPDU: Output low voltage alarm cleared."
--#SUMMARY "Output low voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 321
xPDUOutputVoltageHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The three-phase output voltage of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, above which the alarm was generated."
--#TYPE "APC XPDU: Output high voltage alarm."
--#SUMMARY "Output voltage is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 322
xPDUOutputVoltageHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The three-phase output voltage of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XPDU: Output high voltage alarm cleared."
--#SUMMARY "Output high voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 323
xPDUOutputCurrentLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The three-phase output load current of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in tenths of Amps.
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC XPDU: Output low current alarm."
--#SUMMARY "Output current is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 324
xPDUOutputCurrentLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The three-phase output load current of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Output low current alarm cleared."
--#SUMMARY "Output low current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 325
xPDUOutputCurrentHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The three-phase load current of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in tenths of Amps.
The fifth argument is the threshold, in tenths of Amps, above which the alarm was generated."
--#TYPE "APC XPDU: Output high current alarm."
--#SUMMARY "Output current is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 326
xPDUOutputCurrentHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The three-phase output current of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Output high current alarm cleared."
--#SUMMARY "Output high current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 327
xPDUOutputFrequencyAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The devices output frequency is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the frequency deviation from the nominal in tenths of Hertz."
--#TYPE "APC XPDU: Output frequency out-of-range alarm."
--#SUMMARY "Output frequency is out-of-range."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 328
xPDUOutputFrequencyAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The devices output frequency is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Output frequency back in range."
--#SUMMARY "Output frequency in range."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 329
xPDUSystemGroundCurrentAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"SEVERE: The earth ground current of the device is over the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the measured current in tenths of Amps.
The fourth argument is the threshold, in tenths of Amps, above which the alarm was generated."
--#TYPE "APC XPDU: Earth ground high current alarm."
--#SUMMARY "Earth ground current is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 330
xPDUSystemGroundCurrentAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The earth ground current of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Earth ground high current alarm cleared."
--#SUMMARY "Earth ground high current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 331
xPDUInputContactStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: A user input contact on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the input contact number.
The fourth argument is the input contact name.
The fifth argument is the input contact state (1=OPEN, 2=CLOSED).
The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
--#TYPE "APC XPDU: Input contact has changed to its abnormal state."
--#SUMMARY "Input contact has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 332
xPDUInputContactStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A user input contact on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the input contact number.
The fourth argument is the input contact name.
The fifth argument is the input contact state (1=CLOSED, 2=OPEN).
The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
--#TYPE "APC XPDU: Input contact has changed to its normal state."
--#SUMMARY "Input contact has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 333
xPDUOutputNeutralCurrentHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"WARNING: The three-phase neutral current of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the measured current in tenths of Amps.
The fourth argument is the threshold, in tenths of Amps, above which the alarm was generated."
--#TYPE "APC XPDU: Output high neutral current alarm."
--#SUMMARY "Output neutral current is above threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 334
xPDUOutputNeutralCurrentHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The output neutral current of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Output neutral high current alarm cleared."
--#SUMMARY "Output neutral high current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 335
xPDUCoolingFanAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: The device's internal cooling fans have failed.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Cooling fan failure alarm."
--#SUMMARY "Cooling fan failure."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 336
xPDUCoolingFanAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's cooling fans are now functioning properly.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Cooling fan alarm cleared."
--#SUMMARY "Cooling fan alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 337
xPDUTransformerTempAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: The device's isolation transformer is over temperature.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Isolation transformer over temperature alarm."
--#SUMMARY "Transformer temp alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 338
xPDUTransformerTempAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's isolation transformer is no longer over temperature.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Isolation transformer over temperature alarm cleared."
--#SUMMARY "Transformer temp alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 339
xPDUBranchCurrentLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: The current in a branch circuit is outside the limits specified for that
branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps.
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC XPDU: Branch circuit low current alarm."
--#SUMMARY "Branch circuit current is below threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 340
xPDUBranchCurrentLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a branch circuit is back within the limits
specified for that branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Branch circuit low current alarm cleared."
--#SUMMARY "Branch circuit low current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 341
xPDUBranchCurrentHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: The current in a branch circuit is outside the limits specified for that
branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps.
The fifth argument is the threshold, in tenths of Amps, above which the alarm was generated."
--#TYPE "APC XPDU: Branch circuit high current alarm."
--#SUMMARY "Branch circuit current is above threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 342
xPDUBranchCurrentHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a branch circuit is back within the limits
specified for that branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Branch circuit high current alarm cleared."
--#SUMMARY "Branch circuit high current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 343
xPDUInternalCommError TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: There is an internal communication error in the device.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Internal communication error."
--#SUMMARY "Internal communication error."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 344
emsHardwareStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"SEVERE: The device's hardware is improperly configured and operating outside
normal bounds for the hardware. This can be caused by improper devices being
connected to the EMS ports or Alink Current limit detection."
--#TYPE "APC EMS: Hardware is in an abnormal state."
--#SUMMARY "Hardware is in an abnormal state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 345
emsHardwareStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's hardware is in its normal operational state.
The first argument is the host device serial number."
--#TYPE "APC EMS: Hardware is in a normal state."
--#SUMMARY "Hardware is in its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 346
ceSevereCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: A Custom Event severe condition was detected.
The first variable is the custom event text message.
The second variable is the custom event number."
--#TYPE "APC Custom Event: A severe condition was detected. "
--#SUMMARY "A severe condition was detected. "
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 347
ceSevereConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Custom Event severe condition was cleared.
The first variable is the custom event text message.
The second variable is the custom event number."
--#TYPE "APC Custom Event: A severe condition was cleared. "
--#SUMMARY "A severe condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 348
ceWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: A Custom Event warning condition was detected.
The first variable is the custom event text message.
The second variable is the custom event number."
--#TYPE "APC Custom Event: A warning condition was detected. "
--#SUMMARY "A warning condition was detected. "
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 349
ceWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Custom Event warning condition was cleared.
The first variable is the custom event text message.
The second variable is the custom event number."
--#TYPE "APC Custom Event: A warning condition was cleared. "
--#SUMMARY "A warning condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 350
ceInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Custom Event informational condition was detected.
The first variable is the custom event text message.
The second variable is the custom event number."
--#TYPE "APC Custom Event: Informational condition detected. "
--#SUMMARY "An informational condition was detected. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 351
ceInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Custom Event informational condition was cleared.
The first variable is the custom event text message.
The second variable is the custom event number."
--#TYPE "APC Custom Event: Informational condition was cleared. "
--#SUMMARY "An informational condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 352
upsInternalOverTemperature TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The internal over temperature condition exists."
--#TYPE "APC UPS: The internal over temperature condition exists."
--#SUMMARY "The internal over temperature condition exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 353
upsInternalOverTemperatureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The internal over temperature condition cleared."
--#TYPE "APC UPS: The internal over temperature condition cleared."
--#SUMMARY "The internal over temperature condition cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 354
upsMpuReset TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The MPU has been reset."
--#TYPE "APC UPS: The MPU has been reset."
--#SUMMARY "The MPU has been reset."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 355
upsOutputSwitchClosed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The Output Switch is closed."
--#TYPE "APC UPS: The Output Switch is closed."
--#SUMMARY "The Output Switch is closed."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 356
upsOutputSwitchOpened TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The Output Switch is open."
--#TYPE "APC UPS: The Output Switch is open."
--#SUMMARY "The Output Switch is open."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 357
upsCalibrationStackChanged TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A calibration value in the stack was changed."
--#TYPE "APC UPS: A calibration value in the stack was changed."
--#SUMMARY "A calibration value in the stack was changed."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 358
-- Upgraded EMS now has more env traps
envMaxTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Max temperature threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Max temperature threshold violation."
--#SUMMARY "Max temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 359
envMaxTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Max temperature threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Max temperature threshold violation cleared."
--#SUMMARY "Max temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 360
envMinTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Min temperature threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Min temperature threshold violation."
--#SUMMARY "Min temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 361
envMinTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Min temperature threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Min temperature threshold violation cleared."
--#SUMMARY "Min temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 362
envMaxHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Max humidity threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: Max humidity threshold violation."
--#SUMMARY "Max humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 363
envMaxHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Max humidity threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity.
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: Max humidity threshold violation cleared."
--#SUMMARY "Max humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 364
envMinHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Min humidity threshold violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: Min humidity threshold violation."
--#SUMMARY "Min humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 365
envMinHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Min humidity threshold violation cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current humidity.
The fourth argument is the probe number.
The fifth argument is the probe name."
--#TYPE "APC ENV: Min humidity threshold violation cleared."
--#SUMMARY "Min humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 366
envSTIncTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Short-term increasing temperature rate violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Short-term inc. temp rate violation."
--#SUMMARY "Short-term inc. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 367
envSTIncTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Short-term increasing temperature rate cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Short-term inc. temp rate violation cleared."
--#SUMMARY "Short-term inc. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 368
envSTDecTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Short-term decreasing temperature rate violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Short-term dec. temp rate violation."
--#SUMMARY "Short-term dec. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 369
envSTDecTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Short-term decreasing temperature rate cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Short-term dec. temp rate violation cleared."
--#SUMMARY "Short-term dec. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 370
envLTIncTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Long-term increasing temperature rate violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Long-term inc. temp rate violation."
--#SUMMARY "Long-term inc. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 371
envLTIncTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Long-term increasing temperature rate cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Long-term inc. temp rate violation cleared."
--#SUMMARY "Long-term inc. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 372
envLTDecTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"SEVERE: Long-term decreasing temperature rate violated on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Long-term dec. temp rate violation."
--#SUMMARY "Long-term dec. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 373
envLTDecTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Long-term decreasing temperature rate cleared on the probe.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the current temperature.
The fourth argument is the temperature scale.
The fifth argument is the probe number.
The sixth argument is the probe name."
--#TYPE "APC ENV: Long-term dec. temp rate violation cleared."
--#SUMMARY "Long-term dec. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 374
-- Battery Management System Traps
bmsCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: A Battery Management System critical condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC BMS: A critical condition was detected. "
--#SUMMARY "A critical condition was detected. "
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 375
bmsCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Battery Management System critical condition was cleared.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC BMS: A critical condition was cleared. "
--#SUMMARY "A critical condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 376
bmsWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: A Battery Management System warning condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC BMS: A warning condition was detected. "
--#SUMMARY "A warning condition was detected. "
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 377
bmsWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: A Battery Management System warning condition was cleared.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC BMS: A warning condition was cleared. "
--#SUMMARY "A warning condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 378
bmsInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Battery Management System informational condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC BMS: Informational condition detected. "
--#SUMMARY "An informational condition was detected. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 379
bmsInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A Battery Management System informational condition was cleared.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "APC BMS: Informational condition was cleared. "
--#SUMMARY "An informational condition was cleared. "
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 380
-- xATS Traps
xATSOutputVoltageLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The device three-phase output voltage of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC XATS: Output low voltage alarm."
--#SUMMARY "Output voltage is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 381
xATSOutputVoltageLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The devices three-phase output voltage is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XATS: Output low voltage alarm cleared."
--#SUMMARY "Output low voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 382
xATSOutputVoltageHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The device three-phase output voltage of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts.
The fifth argument is the threshold, in tenths of Volts, above which the alarm is generated."
--#TYPE "APC XATS: Output high voltage alarm."
--#SUMMARY "Output voltage is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 383
xATSOutputVoltageHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The devices three-phase output voltage is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
The fourth argument is the measured voltage in tenths of Volts."
--#TYPE "APC XATS: Output high voltage alarm cleared."
--#SUMMARY "Output high voltage alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 384
xATSOutputCurrentLowAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The three-phase load current of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in Amps.
The fifth argument is the threshold, in Amps, from which the alarm was generated."
--#TYPE "APC XATS: Output low current alarm."
--#SUMMARY "Output current is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 385
xATSOutputCurrentLowAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The three-phase load current of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in Amps."
--#TYPE "APC XATS: Output low current alarm cleared."
--#SUMMARY "Output low current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 386
xATSOutputCurrentHighAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The three-phase output load current of the device is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in Amps.
The fifth argument is the threshold, in Amps, from which the alarm was generated."
--#TYPE "APC XATS: Output high current alarm."
--#SUMMARY "Output current is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 387
xATSOutputCurrentHighAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The three-phase output load current of the device is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3).
The fourth argument is the measured current in Amps."
--#TYPE "APC XATS: Output high current alarm cleared."
--#SUMMARY "Output high current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 388
xATSOutputFrequencyAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"SEVERE: The devices output frequency is outside the specified limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the frequency deviation from the nominal in tenths of Hertz.
The fourth argument is the frequency deviation threshold in tenths of Hertz,
from which the alarm was generated."
--#TYPE "APC XATS: Output frequency out-of-range alarm."
--#SUMMARY "Output frequency is out-of-range."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 389
xATSOutputFrequencyAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The devices output frequency is back within the specified limits.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Output frequency back in range."
--#SUMMARY "Output frequency in range."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 390
xATSInternalCommError TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: There is an internal communication error in the device.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Internal communication error."
--#SUMMARY "Internal communication error."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 391
xATSInternalCommErrorCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Internal communication has been restored.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Internal Communication error cleared."
--#SUMMARY "ATS Communication error cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 392
xATSDataCommMismatchError TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: A data incompatibility exists within the device. This
is typically the result of mismatches between firmware revisions
of the transfer switch controller and the Network Management interface.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Data mismatch error."
--#SUMMARY "ATS data mismatch error."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 393
xATSDataCommMismatchErrorCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The internal data incompatibility has been resolved.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: data mismatch error cleared."
--#SUMMARY "ATS data mismatch error cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 394
xATSGenCommLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The XATS cannot communicate with the generator.
This will make unavailable all the xATSGenerator OIDs.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: No communication with generator."
--#SUMMARY "ATS/Generator communication lost."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 395
xATSGenCommEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The XATS has established communication with the generator.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Communication with generator established."
--#SUMMARY "ATS/generator communication established."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 396
xATSNeutralPosition TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"WARNING: XATS has transferred to neutral position.
In this position neither Source 1 nor Source 2 is selected,
and the XATS will have no output voltage.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the mode in which the switch is operating
(1=Auto, 2=Not-in-Auto, Abnormal Condition 3=Not-in-Auto, manual)."
--#TYPE "APC XATS: Transferred to the neutral (no output power) position."
--#SUMMARY "Transferred to neutral."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 397
xATSSwitchTransferEvent TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: XATS has transferred from one source to the other.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the mode in which the switch is operating.
(1=Auto, 2=Not-in-Auto, Abnormal Condition 3=Not-in-Auto, manual).
The fourth argument is the input source selected (1=Source 1, 2=Source 2).
The fifth argument is type of transfer that took place. (1=Closed, 2=Open, 3=Unknown)"
--#TYPE "APC XATS: Transferred from Source-X to Source-Y."
--#SUMMARY "Source-to-Source transfer."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 398
xATSInternalATSFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: An internal XATS fault has been detected.
The XATS may have forced itself to not-in-auto mode (abnormal condition),
as indicated by the xATSSwitchStatusAutoSwitchOperationalMode OID.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument indicates the detected fault.
1=Cannot Close S1
2=Cannot Close S2
3=Cannot Open S1
4=Cannot Open S2
5=Cannot Trip Open S1
6=Cannot Trip Open S2
7=Start Contact Failure
8=Voltage Sensing Failure"
--#TYPE "APC XATS: Internal fault detected."
--#SUMMARY "ATS internal fault detected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 399
xATSInternalATSFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected internal XATS fault has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument indicates the detected fault.
1=Cannot Close S1
2=Cannot Close S2
3=Cannot Open S1
4=Cannot Open S2
5=Cannot Trip Open S1
6=Cannot Trip Open S2
7=Start Contact Failure
8=Voltage Sensing Failure"
--#TYPE "APC XATS: Internal fault cleared."
--#SUMMARY "ATS internal fault cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 400
xATSEngineStartAsserted TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The XATS has asserted the Engine Start contact.
This should result in the generator producing output voltage.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument indicates the reason that the start signal was asserted
1=Unknown, 2=S1 Low Voltage, 3=S1 High Voltage, 4=S1 Line Imbalance,
5=S1 Freq Range, 6=S1 Bad Rotation."
--#TYPE "APC XATS: Engine Start signal asserted."
--#SUMMARY "Engine Start asserted."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 401
xATSEngineStopAsserted TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The XATS has de-asserted the Engine Start contact.
This should result in the generator shutting down, and producing no output voltage.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Engine Stop signal asserted."
--#SUMMARY "Engine Stop asserted."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 402
xATSStartFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator failed to start. After assertion of the
Engine Start signal, the quality of Source 2 was not seen as good.
This alarm can be cleared using the xATSSwitchStatusClearLatchedAlarms OID.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument indicates the line quality at S2
1=Unknown, 2=S2 Low Voltage, 3=S2 High Voltage, 4=S2 Line Imbalance,
4=S2 Freq Range, 5=S2 Bad Rotation."
--#TYPE "APC XATS: Generator failed to start alarm."
--#SUMMARY "Generator failed to start."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 403
xATSStopFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The generator failed to stop. After de-assertion of the
Engine Start signal, the quality of Source 2 continued to be seen as good.
This alarm can be cleared using the xATSSwitchStatusClearLatchedAlarms OID.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Generator failed to stop alarm."
--#SUMMARY "Generator failed to stop."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 404
xATSNotInAutomaticMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: Automatic Transfer Switch is not in automatic mode.
The first argument is the host device serial number.
The second argument is the host device name.
The xATSSwitchStatusAutoSwitchStatus OID and the
xATSSwitchStatusAutoSwitchOperationalMode OID
can provide more information about the state of the XATS."
--#TYPE "APC XATS: XATS is not-in-automatic mode."
--#SUMMARY "ATS not in auto."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 405
xATSNotInAutomaticModeCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Automatic Transfer Switch is in automatic mode.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: XATS in auto mode."
--#SUMMARY "ATS in auto mode."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 406
xATSEpoTripped TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: The device's Emergency Power Off (EPO) circuit is tripped.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Emergency Power Off (EPO) tripped."
--#SUMMARY "EPO tripped."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 407
xATSEpoReset TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's Emergency Power Off (EPO) circuit has been
reset to the armed position.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Emergency Power Off (EPO) reset."
--#SUMMARY "EPO armed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 408
xATSEpoTestMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The device's Emergency Power Off (EPO) circuit has been
switched back to the test position.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Emergency Power Off (EPO) in test mode."
--#SUMMARY "EPO disabled."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 409
xATSEpoArmed TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's Emergency Power Off (EPO) circuit has been
switched back to the armed position.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Emergency Power Off (EPO) enabled."
--#SUMMARY "EPO armed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 410
xATSTestInitiated TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A scheduled test has been initiated.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the type of test initiated (1=scheduled, 2=manual)."
--#TYPE "APC XATS: Test initiated."
--#SUMMARY "Test initiated."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 411
xATSTestCanceled TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The scheduled test has been canceled
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the type of test initiated (1=scheduled, 2=manual)."
--#TYPE "APC XATS: Test canceled."
--#SUMMARY "Test canceled."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 412
xATSTestFailed TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: The initiated test has failed.
This alarm can be cleared using the xATSSwitchStatusClearLatchedAlarms OID.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Initiated test failed."
--#SUMMARY "Initiated test failed."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 413
xATSTestPassed TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The initiated test has passed
switched back to the armed position.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Initiated test passed."
--#SUMMARY "Initiated test passed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 414
xATSInputContactStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: A user input contact on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the input contact number.
The fourth argument is the input contact name.
The fifth argument is the input contact state (1=OPEN, 2=CLOSED).
The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
--#TYPE "APC XATS: Input contact has changed to its abnormal state."
--#SUMMARY "Input contact has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 415
xATSInputContactStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A user input contact on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the input contact number.
The fourth argument is the input contact name.
The fifth argument is the input contact state (1=OPEN, 2=CLOSED).
The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
--#TYPE "APC XATS: Input contact has changed to its normal state."
--#SUMMARY "Input contact has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 416
xATSRemoteStartContactMismatch TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: The state of the generator's Remote Start input
and the ATS's Engine Start output do not match.
This indicates something wrong in the Engine Start wiring,
which must be corrected. This condition will prevent the
generator from being started when needed.
(See also: xATSGeneratorStatusRemoteStart
and xATSSwitchStatusEngineStartSignal OIDs)
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Generator/ATS start contact mismatch."
--#SUMMARY "Generator/ATS start contact mismatch."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 417
xATSRemoteStartContactMismatchCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Mismatch in the state of the generator's
Remote Start input and the ATS's Engine Start output as been resolved.
This indicates something wrong in the Engine Start wiring,
which must be corrected. This condition will prevent the
generator from being started when needed.
(See also: xATSGeneratorStatusRemoteStart
and xATSSwitchStatusEngineStartSignal OIDs)
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Generator/ATS start contact mismatch cleared."
--#SUMMARY "Generator/ATS start contact mismatch cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 418
xATSDoorOpenAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The XATS exterior panel door is open.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Panel door is open alarm."
--#SUMMARY "Panel door open alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 419
xATSDoorOpenAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The external door to the device is closed.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Panel door open alarm cleared."
--#SUMMARY "Panel door open alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 420
xATSDCBackupAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The XATS's DC backup has been lost. The XATS will lose power
on Source 1 failure, causing the Engine Start signal to be asserted.
The XATS will then restart from Source 2.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: DC backup failure."
--#SUMMARY "ATS DC backup failure."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 421
xATSDCBackupAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: DC backup alarm has been cleared in the device.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: DC backup alarm cleared."
--#SUMMARY "DC backup alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 422
-- xATS Generator Traps
xATSGeneratorLowCoolantLevelAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Low coolant level has been detected in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low coolant level alarm."
--#SUMMARY "Generator low coolant level alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 423
xATSGeneratorLowCoolantLevelAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected low coolant level has been cleared in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low coolant level alarm cleared."
--#SUMMARY "Generator low coolant level alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 424
xATSGeneratorVeryLowCoolantLevelAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Very low coolant level has been detected in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator very low coolant level alarm."
--#SUMMARY "Generator very low coolant level alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 425
xATSGeneratorVeryLowCoolantLevelAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected Very low coolant level has been cleared in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator very low coolant level alarm cleared."
--#SUMMARY "Generator very low coolant level alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 426
xATSGeneratorHighCoolantTempAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: High coolant temperature has been detected in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator high coolant temperature alarm."
--#SUMMARY "Generator high coolant temperature alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 427
xATSGeneratorHighCoolantTempAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected high coolant temperature has been cleared in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator high coolant temperature alarm cleared."
--#SUMMARY "Generator high coolant temperature alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 428
xATSGeneratorVeryHighCoolantTempAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Very high coolant temperature has been detected in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator very high coolant temperature alarm."
--#SUMMARY "Generator very high coolant temperature alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 429
xATSGeneratorVeryHighCoolantTempAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The Very high coolant temperature condition has been cleared in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator very high coolant temperature alarm cleared."
--#SUMMARY "Generator very high coolant temperature alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 430
xATSGeneratorLowCoolantTempAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Low coolant temperature has been detected in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low coolant temperature alarm."
--#SUMMARY "Generator low coolant temperature alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 431
xATSGeneratorLowCoolantTempAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The low coolant temperature condition has been cleared in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low coolant temperature alarm cleared."
--#SUMMARY "Generator low coolant temperature alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 432
xATSGeneratorLowOilLevelAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Low oil level has been detected in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low oil level alarm."
--#SUMMARY "Generator low oil level alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 433
xATSGeneratorLowOilLevelAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low oil level alarm has been cleared in the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low oil level alarm cleared."
--#SUMMARY "Generator low oil level alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 434
xATSGeneratorLowBatteryVoltDuringCrankAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator's battery voltage has been detected
as low while cranking the engine.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Low batt. voltage while cranking alarm."
--#SUMMARY "Generator low battery volts while cranking alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 435
xATSGeneratorLowBatteryVoltDuringCrankAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator's low battery voltage while
cranking condition has been cleared.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "XGEN: Generator low batt. voltage while cranking alarm cleared."
--#SUMMARY "Generator low battery volts while cranking alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 436
xATSGeneratorVeryLowBatteryVoltDuringCrankAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator's battery voltage has been detected
as very low while cranking the engine.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "XGEN: Generator v.low battery voltage while cranking alarm."
--#SUMMARY "Generator v.low battery volts while cranking alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 437
xATSGeneratorVeryLowBatteryVoltDuringCrankAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator's high battery voltage while
cranking condition has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "XGEN: Generator v.low batt volt, while cranking alarm cleared."
--#SUMMARY "Generator v.low battery volts while cranking alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 438
xATSGeneratorEStop TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"SEVERE: The generator's emergency stop input has been activated.
After the emergency stop signal has been removed, the E-Stop condition
must be cleared before the generator can be started again.
E-Stop conditions can only be cleared via the generator front panel.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code.
The fourth argument is the type of E-Stop (1=LOCAL, 2=REMOTE)."
--#TYPE "APC XGEN: Generator emergency stop engaged."
--#SUMMARY "Generator emergency stop engaged."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 439
xATSGeneratorEStopCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator's emergency stop condition has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code.
The fourth argument is the type of E-Stop (1=LOCAL, 2=REMOTE)."
--#TYPE "APC XGEN: Generator emergency stop condition cleared."
--#SUMMARY "Generator emergency stop condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 440
xATSGeneratorHighBatteryVolt TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: The generator's battery voltage has been detected as high.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator high battery voltage."
--#SUMMARY "Generator high battery volts."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 441
xATSGeneratorHighBatteryVoltCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected high battery voltage has been cleared, on the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator high battery voltage condition cleared."
--#SUMMARY "Generator high battery volts condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 442
xATSGeneratorLowBatteryVolt TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator's battery voltage has been detected as low.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low battery voltage."
--#SUMMARY "Generator low battery volts."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 443
xATSGeneratorLowBatteryVoltCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected low battery voltage has been cleared, on the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low battery voltage condition cleared."
--#SUMMARY "Generator low battery volts condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 444
xATSGeneratorControlSwitchNotAuto TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The control switch on the generator is not in auto position.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator not-in-automatic mode."
--#SUMMARY "Generator not-in-auto."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 445
xATSGeneratorControlSwitchNotAutoCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The control switch on the generator is in auto position.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator automatic mode restored."
--#SUMMARY "Generator not-in-auto cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 446
xATSGeneratorLowOilPressure TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator's oil pressure has been detected as low.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low oil pressure."
--#SUMMARY "Generator low oil pressure."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 447
xATSGeneratorLowOilPressureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected low oil pressure has been cleared, on the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator low oil pressure condition cleared."
--#SUMMARY "Generator low oil pressure condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 448
xATSGeneratorVeryLowOilPressure TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator's oil pressure has been detected as very low.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator v.low oil pressure."
--#SUMMARY "Generator v.low oil pressure."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 449
xATSGeneratorVeryLowOilPressureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected v.low oil pressure has been cleared, on the generator.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator v.low oil pressure condition cleared."
--#SUMMARY "Generator v.low oil pressure condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 450
xATSGeneratorOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator is overloaded.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator is in overload event."
--#SUMMARY "Generator on overload event."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 451
xATSGeneratorOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator is running within loading limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator is in overload event cleared."
--#SUMMARY "Generator on overload event cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 452
xATSGeneratorLowACVEvent TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator AC voltage is outside the acceptable bounds.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: State of the Generator AC voltage."
--#SUMMARY " State of the Generator AC voltage."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 453
xATSGeneratorLowACVEventCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator AC voltage is within normal bounds.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: State of the Generator AC voltage cleared."
--#SUMMARY "State of the Generator AC voltage cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 454
xATSGeneratorHighACVEvent TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator AC voltage is outside the acceptable bounds.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: State of the Generator AC voltage."
--#SUMMARY " State of the Generator AC voltage."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 455
xATSGeneratorHighACVEventCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator AC voltage is within normal bounds.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: State of the Generator AC voltage cleared."
--#SUMMARY "State of the Generator AC voltage cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 456
xATSGeneratorOverspeed TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator is running over the acceptable RPM.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator overspeed condition."
--#SUMMARY "Generator overspeed condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 457
xATSGeneratorOverspeedCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator overspeed shutdown has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator overspeed condition cleared."
--#SUMMARY "Generator overspeed condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 458
xATSGeneratorEngineCold TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator engine is cold, may not start.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator engine is cold, may not start."
--#SUMMARY "Generator engine is cold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 459
xATSGeneratorEngineColdCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The engine is not cold to start.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Engine is cold to start condition cleared."
--#SUMMARY "Engine is cold to start condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 460
xATSGeneratorOutputBreakerOpen TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generators output breaker has been detected as open.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator output breaker open alarm."
--#SUMMARY "Generator output breaker open."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 461
xATSGeneratorOutputBreakerOpenCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The engine is not cold to start.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator output breaker open alarm cleared."
--#SUMMARY "Generator output breaker open cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 462
xATSGeneratorLowFuelLevelAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: The tank fuel level is below the limits specified
in the xATSGeneratorFuelSystemLowFuelLevelThreshold OID.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the measured fuel level in percent of full."
--#TYPE "APC XGEN: Low fuel level alarm."
--#SUMMARY "Generator low fuel level alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 463
xATSGeneratorLowFuelLevelAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The tank fuel level is back above the specified limit.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XGEN: Low fuel level alarm cleared."
--#SUMMARY "Generator low fuel level alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 464
xATSGeneratorVeryLowFuelLevelAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The tank fuel level is below the low threshold limits.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the measured tank fuel level in percent of full."
--#TYPE "APC XGEN: Very Low fuel level alarm."
--#SUMMARY "Generator very low fuel level alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 465
xATSGeneratorVeryLowFuelLevelAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected low tank level has been cleared in the device.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XGEN: Very low fuel level alarm cleared."
--#SUMMARY "Generator very low fuel level alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 466
xATSGeneratorLowRunTimeAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: The estimated runtime is below the limits specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the estimated runtime in hours."
--#TYPE "APC XGEN: Low run time alarm."
--#SUMMARY "Generator low run time alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 467
xATSGeneratorLowRunTimeAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected low runtime has been cleared in the device.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XGEN: Low run time alarm cleared."
--#SUMMARY "Generator low run time alarm."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 468
xATSGeneratorVeryLowRunTimeAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The estimated runtime is below the limits specified
in the xATSGeneratorFuelSystemVeryLowRunTimeThreshold OID.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the estimated runtime in hours."
--#TYPE "APC XGEN: Very low run time alarm."
--#SUMMARY "Generator very low run time alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 469
xATSGeneratorVeryLowRunTimeAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The detected low runtime has been cleared in the device.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XGEN: Very low run time alarm cleared."
--#SUMMARY "Generator very low run time alarm."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 470
xATSGeneratorServiceDueAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The generator is due for scheduled service.
Generation of this alarm is based on calendar days since
and/or actual generator run-hours since last service.
This alarm is cleared using the xATSGeneratorServiceResetRecord OID.
(See also: xATSGeneratorServiceCalendarIntervalThreshold
and xATSGeneratorServiceRunHoursThreshold OIDs)
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Generator scheduled maintenance is due."
--#SUMMARY "Generator maintenance due."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 471
xATSGeneratorServiceDueAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator's service registers have been reset.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: Generator service due alarm is cleared."
--#SUMMARY "Generator service alarm is cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 472
xATSGeneratorShutdown TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator is shutdown.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator shutdown."
--#SUMMARY "Generator shutdown"
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 473
xATSGeneratorShutdownCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The generator shutdown alarm is cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator shutdown is cleared."
--#SUMMARY "Generator shutdown is cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 474
xATSGeneratorBatteryCharger TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The generator battery charger is nonfunctional.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator batt. charger is nonfunctional."
--#SUMMARY "Generator battery charger is nonfunctional"
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 475
xATSGeneratorBatteryChargerCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Fault in the generator battery charger is cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Fault in the generator battery charger is cleared."
--#SUMMARY "Fault in the generator battery charger is cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 476
xATSGeneratorGenericEvent TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Any generic generator event.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator generic event."
--#SUMMARY "Generator generic event."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 477
xATSGeneratorGenericEventCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Generated generic generator event is cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generic generator event is cleared."
--#SUMMARY "Generic generator event is cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 478
-- xPDU Traps (part 2)
xPDUInternalCommErrorCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Internal communication has been restored.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Internal Communication error cleared."
--#SUMMARY "Communication error cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 479
xPDUSystemStateAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The PDU's breakers (Q1, Q2 & Q3) are in a configuration that might lead
to system unavailability. it may signify a temporary condition, when the breakers
are placed in an atypical manner as the user transitions to (UPS OPERATION or MAINTENANCE BYPASS)
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the type of state change (1=NO UPS INPUT, 2=NO PANEL FEED, 3=ATYPICAL BYPASS MODE).
note: The NO_PANEL_FEED alarm is applicable only for PDUs with system bypass."
--#TYPE "APC XPDU: System state change alarm."
--#SUMMARY "PDU state change alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 480
xPDUSystemStateAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The PDU's breakers (Q1, Q2 & Q3) are set in a configuration
that is a non-alarm state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the type of state change (1=NO UPS INPUT, 2=NO PANEL FEED, 3=ATYPICAL BYPASS MODE).
note: The NO_PANEL_FEED alarm is applicable only for PDUs with system bypass."
--#TYPE "APC XPDU: Normal system state change."
--#SUMMARY "PDU normal state change."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 481
xPDUEpoTestMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The device's Emergency Power Off (EPO) circuit has been
switched back to the test position.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Emergency Power Off (EPO) in test mode."
--#SUMMARY "EPO disabled."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 482
xPDUEpoArmed TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's Emergency Power Off (EPO) circuit has been
switched back to the armed position.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Emergency Power Off (EPO) enabled."
--#SUMMARY "EPO armed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 483
xPDUFuseBlownAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: One or more fuses in this PDU have been detected as open.
These fuses are in the feed to the UPS associated with this PDU.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3)."
--#TYPE "APC XPDU: Check fuse alarm."
--#SUMMARY "Fuse detected opened."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 484
xPDUFuseBlownAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A previous check fuse alarm in this PDU has cleared.
These fuses are in the feed to the UPS associated with this PDU.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase (1=L1, 2=L2, 3=L3)."
--#TYPE "APC XPDU: Check fuse alarm cleared."
--#SUMMARY "Fuse alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 485
xPDUBreakerPositionAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"SEVERE: A PDU breaker is in a state that compromises system availability.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the breaker (1=MAIN INPUT, 2=BYPASS INPUT, 3=CROSS TIE, 4=OUTPUT).
note: The OUTPUT breaker position alarm is applicable only for PDUs with no system bypass.
The fourth argument is the breaker position (1=OPEN, 2=CLOSED)."
--#TYPE "APC XPDU: Breaker position alarm."
--#SUMMARY "Breaker position alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 486
xPDUBreakerPositionAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A PDU breaker is no longer in a state that compromises system availability.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the breaker (1=MAIN INPUT, 2=BYPASS INPUT, 3=CROSS TIE, 4=OUTPUT).
note: The OUTPUT breaker position alarm cleared is applicable only for PDUs with no system bypass."
--#TYPE "APC XPDU: Breaker position alarm cleared."
--#SUMMARY "Breaker alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 487
xPDUBreakerChangeEvent TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A system breaker or switch within the device has changed state.
They are generated when any of the Q1, Q2 or Q3 breakers have changed states.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the breaker that has changed
(1=UPS FEED (Q1), 2=UPS OUTPUT(Q2), 3=MAINTENANCE BYPASS (Q3).
The fourth argument is the state of the breaker that has changed (1=OPEN, 2=CLOSED).
The fifth argument is a 8-bit field representing the state of all breakers in the system,
when any of one of the Q1, Q2 or Q3 breakers have changed state.
The bit map is represented in the following manner (b7, b6 ... b0)
b0 - UPS FEED (Q1)
b1 - MAINTENANCE BYPASS (Q3)
b2 - UPS OUTPUT (Q2)
b3 - MAIN INPUT
b4 - BYPASS INPUT
b5 - CROSS-TIE OUTPUT
Example: value of 60 (0x3C) indicates that the CROSS_TIE, BYPASS and MAIN INPUT, and Q2 breakers
are CLOSED and Q3, Q1 breakers are OPEN."
--#TYPE "APC XPDU: Breaker/switch change event."
--#SUMMARY "Breaker/switch change event."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 488
xPDUDataCommMismatchError TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: A data incompatibility exists within the device. This
is typically the result of mismatches between firmware revisions
of the transfer switch controller and the Network Management interface.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: Data mismatch error."
--#SUMMARY "XPDU data mismatch error."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 489
xPDUDataCommMismatchErrorCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The internal data incompatibility has been resolved.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: data mismatch error cleared."
--#SUMMARY "XPDU data mismatch error cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 490
xPDUSystemInMaintenanceBypassMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"WARNING: The PDU state has changed to maintenance bypass mode.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: System state changed to maintenance bypass."
--#SUMMARY "PDU state changed to maintenance bypass."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 491
xPDUSystemInUPSOperationalMode TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The PDU state has changed to UPS operational mode.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XPDU: System state changed to UPS operational."
--#SUMMARY "PDU state changed to UPS operational."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 492
xATSGeneratorFuelTankRuptureAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Detected a rupture in the inner wall of the generator fuel tank.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator inner wall rupture alarm."
--#SUMMARY "Generator inner wall rupture alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 493
xATSGeneratorFuelTankRuptureAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The rupture in the inner wall of the generator is not detected.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator inner wall rupture alarm cleared."
--#SUMMARY "Generator inner wall rupture alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 494
xATSGeneratorGroundFaultAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Generator ground fault alarm.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator ground fault alarm."
--#SUMMARY "Generator ground fault alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 495
xATSGeneratorGroundFaultAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Generator ground fault alarm cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the OEM's fault/event code."
--#TYPE "APC XGEN: Generator ground fault alarm cleared."
--#SUMMARY "Generator ground fault alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 496
xATSOutputLoadPoweredByGeneratorAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: The system load on the output of the ATS is being powered by source 2 (generator).
The first argument is the host device serial number.
The second argument is the host device name.
The third argument indicates if the load is powered by the generator,
when 'load testing' the generator (1 = LIVE, 2 = TEST)."
--#TYPE "APC XATS: System load powered by generator alarm."
--#SUMMARY "System load powered by generator."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 497
xATSOutputLoadPoweredByGeneratorAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The system load on the output of the ATS is no longer being powered by source 2 (generator).
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: System load powered by generator alarm cleared."
--#SUMMARY "System load powered by generator alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 498
xAPCControllerFirmwareUpdateTransferStart TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString05, mtrapargsString04, mtrapargsString02, mtrapargsString03,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Start controller firmware transfer in the device.
The first argument is the host device serial number.
The second argument is the host model name that initiated the transfer.
The third argument is the name of the file that is transferred.
The fourth argument is the updated revision of the file, if available
The fifth argument is the reason for the update, if available
(1=User request, 2=Automatic upgrade by NMC, 3=Unknown)."
--#TYPE "APC: Start update transfer."
--#SUMMARY "Start update transfer."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 499
xAPCControllerFirmwareUpdateTransferComplete TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString05, mtrapargsString04, mtrapargsString02,
mtrapargsString03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Transfer of controller firmware was completed in the device.
The first argument is the host device serial number.
The second argument is the host device model name that completed the transfer.
The third argument is the name of the file that was transferred.
The fourth argument is the revision of the file that was transferred, if available."
--#TYPE "APC : Update transfer complete."
--#SUMMARY "Update transfer complete."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 500
xAPCControllerFirmwareUpdateTransferFailed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString05, mtrapargsString04, mtrapargsString02,
mtrapargsString03, mtrapargsString }
DESCRIPTION
"SEVERE: Transfer of controller firmware failed.
The first argument is the host device serial number.
The second argument is the host device model name that failed to transfer.
The third argument is the name of the file that failed the transfer, if available.
The fourth argument is the reason for failure."
--#TYPE "APC: Update transfer failed."
--#SUMMARY "Update transfer failed."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 501
upsPfcInputRelayFailure TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The PFC (Power Factor Correction) input relay failure exists."
--#TYPE "APC UPS: The PFC input relay failure exists."
--#SUMMARY "The PFC (Power Factor Correction) input relay failure exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 502
upsPfcInputRelayFailureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The PFC (Power Factor Correction) input relay failure cleared."
--#TYPE "APC UPS: The PFC input relay failure cleared."
--#SUMMARY "The PFC (Power Factor Correction) input relay failure cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 503
upsInverterOverTemperature TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The inverter over temperature condition exists."
--#TYPE "APC UPS: The inverter over temperature condition exists."
--#SUMMARY "The inverter over temperature condition exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 504
upsInverterOverTemperatureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The inverter over temperature condition cleared."
--#TYPE "APC UPS: The inverter over temperature condition cleared."
--#SUMMARY "The inverter over temperature condition cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 505
upsBatteryOverVoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The battery over voltage condition exists."
--#TYPE "APC UPS: The battery over voltage condition exists."
--#SUMMARY "The battery over voltage condition exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 506
upsBatteryOverVoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The battery over voltage condition cleared."
--#TYPE "APC UPS: The battery over voltage condition cleared."
--#SUMMARY "The battery over voltage condition cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 507
upsEepromFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The EEPROM fault exists."
--#TYPE "APC UPS: The EEPROM fault exists."
--#SUMMARY "The EEPROM fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 508
upsEepromFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The EEPROM fault cleared."
--#TYPE "APC UPS: The EEPROM fault cleared."
--#SUMMARY "The EEPROM fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 509
-- rARU Traps (part 2)
aruFanRuntimeAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: The total running hours for a fan has exceeded
the run hour threshold.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name.
The fifth argument indicates which fan in the ARU."
--#TYPE "APC ARU: Fan Runhour Warning."
--#SUMMARY "Fan Runhour Alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 510
aruFanRuntimeAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The total running hours for a fan is no longer
above the fan runhour threshold.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name.
The fifth argument indicates which fan in the ARU."
--#TYPE "APC ARU: Fan Runhour Alarm Cleared."
--#SUMMARY "Fan Runhour Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 511
aruFanPoorPerformanceAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Poor fan performance has been detected in the ARU,
indicating that the fan may be close to failing.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name.
The fifth argument indicates which fan in the ARU."
--#TYPE "APC ARU: Poor Fan Performance Warning."
--#SUMMARY "Fan Health Alarm."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 512
aruFanPoorPerformanceAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Fan performance is no longer degraded.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name.
The fifth argument indicates which fan in the ARU."
--#TYPE "APC ARU: Poor Fan Performance Warning Cleared."
--#SUMMARY "Fan Health Alarm Cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 513
aruRedundantPowerLostAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"WARNING: One of the redundant line cords on the ARU is no longer receiving AC power.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Redundant AC Input is not Present."
--#SUMMARY "AC Redundancy Lost."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 514
aruRedundantPowerLostAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Line-cord redundancy has been restored to the ARU.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the ARU number.
The fourth argument is the ARU name."
--#TYPE "APC ARU: Redundant AC Input is Present."
--#SUMMARY "AC Redundancy Restored."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 515
apcDeviceConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A device configuration change has been made on the device.
The first argument is the device serial number.
The second argument is the device name.
The third argument is a secondary device id number."
--#TYPE "APC: A device configuration change on a device."
--#SUMMARY "A device configuration change has been made on a device."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 516
apcEnvSensorConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A sensor has been connected to the host device.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Sensor Connected."
--#SUMMARY "Sensor Connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 517
apcEnvSensorDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: A sensor has been disconnected from the device.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Sensor Disconnected."
--#SUMMARY "Sensor Disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 518
apcEnvMaxTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Max temperature threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Max temperature threshold violation."
--#SUMMARY "Max temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 519
apcEnvMaxTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Max temperature threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Max temperature threshold violation cleared."
--#SUMMARY "Max temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 520
apcEnvHighTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: High temperature threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: High temperature threshold violation."
--#SUMMARY "High temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 521
apcEnvHighTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High temperature threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: High temperature threshold violation cleared."
--#SUMMARY "High temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 522
apcEnvLowTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: Low temperature threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Low temperature threshold violation."
--#SUMMARY "Low temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 523
apcEnvLowTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low temperature threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Low temperature threshold violation cleared."
--#SUMMARY "Low temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 524
apcEnvMinTempThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Min temperature threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Min temperature threshold violation."
--#SUMMARY "Min temperature threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 525
apcEnvMinTempThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Min temperature threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The sixth argument is the sensor number.
The seventh argument is the sensor name."
--#TYPE "APC ENV: Min temperature threshold violation cleared."
--#SUMMARY "Min temperature threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 526
apcEnvSTIncTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Short-term increasing temperature rate violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Short-term inc. temp rate violation."
--#SUMMARY "Short-term inc. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 527
apcEnvSTIncTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Short-term increasing temperature rate cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Short-term inc. temp rate violation cleared."
--#SUMMARY "Short-term inc. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 528
apcEnvSTDecTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Short-term decreasing temperature rate violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Short-term dec. temp rate violation."
--#SUMMARY "Short-term dec. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 529
apcEnvSTDecTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Short-term decreasing temperature rate cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Short-term dec. temp rate violation cleared."
--#SUMMARY "Short-term dec. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 530
apcEnvLTIncTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Long-term increasing temperature rate violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Long-term inc. temp rate violation."
--#SUMMARY "Long-term inc. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 531
apcEnvLTIncTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Long-term increasing temperature rate cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Long-term inc. temp rate violation cleared."
--#SUMMARY "Long-term inc. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 532
apcEnvLTDecTempRateViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Long-term decreasing temperature rate violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Long-term dec. temp rate violation."
--#SUMMARY "Long-term dec. temp rate violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 533
apcEnvLTDecTempRateViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Long-term decreasing temperature rate cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Long-term dec. temp rate violation cleared."
--#SUMMARY "Long-term dec. temp rate violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 534
apcEnvMaxHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Max humidity threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Max humidity threshold violation."
--#SUMMARY "Max humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 535
apcEnvMaxHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Max humidity threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Max humidity threshold violation cleared."
--#SUMMARY "Max humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 536
apcEnvHighHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: High humidity threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: High humidity threshold violation."
--#SUMMARY "High humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 537
apcEnvHighHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High humidity threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: High humidity threshold violation cleared."
--#SUMMARY "High humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 538
apcEnvLowHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: Low humidity threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Low humidity threshold violation."
--#SUMMARY "Low humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 539
apcEnvLowHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low humidity threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Low humidity threshold violation cleared."
--#SUMMARY "Low humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 540
apcEnvMinHumidityThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Min humidity threshold violated on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Min humidity threshold violation."
--#SUMMARY "Min humidity threshold violation."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 541
apcEnvMinHumidityThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Min humidity threshold violation cleared on the sensor.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the sensor number.
The fifth argument is the sensor name."
--#TYPE "APC ENV: Min humidity threshold violation cleared."
--#SUMMARY "Min humidity threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 542
apcBeaconConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A beacon has been connected to the device.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number."
--#TYPE "APC: Beacon Connected."
--#SUMMARY "Beacon Connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 543
apcBeaconDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"SEVERE: A beacon has been disconnected from the device.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number. "
--#TYPE "APC: Beacon Disconnected."
--#SUMMARY "Beacon Disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 544
apcBeaconOn TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A beacon has gone on (activated).
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number. "
--#TYPE "APC: Beacon On."
--#SUMMARY "Beacon On."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 545
apcBeaconOff TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A beacon has gone off (deactivated).
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number. "
--#TYPE "APC: Beacon Off."
--#SUMMARY "Beacon Off."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 546
apcOutletStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger, mtrapargsString04,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: An outlet on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the outlet number.
The fifth argument is the outlet name.
The sixth argument is the current outlet state (1=ON, 2=OFF).
The seventh argument is the configured normal outlet state (1=ON, 2=OFF)."
--#TYPE "APC: Outlet has changed to its abnormal state."
--#SUMMARY "Outlet has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 547
apcOutletStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger, mtrapargsString04,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An outlet on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the outlet number.
The fifth argument is the outlet name.
The sixth argument is the current outlet state (1=ON, 2=OFF).
The seventh argument is the configured normal outlet state (1=ON, 2=OFF)."
--#TYPE "APC: Outlet has changed to its normal state."
--#SUMMARY "Outlet has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 548
apcOutputRelayStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: An output relay on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the output relay number.
The fifth argument is the output relay name.
The sixth argument is the current output relay state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal output relay state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Output Relay has changed to its abnormal state."
--#SUMMARY "Output Relay has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 549
apcOutputRelayStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An output relay on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the output relay number.
The fifth argument is the output relay name.
The sixth argument is the current output relay state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal output relay state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Output Relay has changed to its normal state."
--#SUMMARY "Output Relay has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 550
apcHardwareStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The device's hardware is improperly configured and operating outside
normal bounds for the hardware. This can be caused by improper devices being
connected to device ports or Alink Current limit detection.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is a hardware specific state code."
--#TYPE "APC: Hardware is in an abnormal state."
--#SUMMARY "Hardware is in an abnormal state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 551
apcHardwareStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's hardware is in its normal operational state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number."
--#TYPE "APC EMS: Hardware is in a normal state."
--#SUMMARY "Hardware is in its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 552
apcCriticalDiscreteInputContactStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: A discrete input contact on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input contact number.
The fifth argument is the input contact name.
The sixth argument is the input contact state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Discrete input contact has changed to its abnormal state."
--#SUMMARY "Discrete input contact has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 553
apcCriticalDiscreteInputContactStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A discrete input contact on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input contact number.
The fifth argument is the input contact name.
The sixth argument is the input contact state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Discrete input contact has changed to its normal state."
--#SUMMARY "Discrete input contact has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 554
apcWarningDiscreteInputContactStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: A discrete input contact on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input contact number.
The fifth argument is the input contact name.
The sixth argument is the input contact state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Discrete input contact has changed to its abnormal state."
--#SUMMARY "Discrete input contact has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 555
apcWarningDiscreteInputContactStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A discrete input contact on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input contact number.
The fifth argument is the input contact name.
The sixth argument is the input contact state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Discrete input contact has changed to its normal state."
--#SUMMARY "Discrete input contact has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 556
apcInformationalDiscreteInputContactStateAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A discrete input contact on the device has changed to its abnormal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input contact number.
The fifth argument is the input contact name.
The sixth argument is the input contact state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Discrete input contact has changed to its abnormal state."
--#SUMMARY "Discrete input contact has changed to its abnormal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 557
apcInformationalDiscreteInputContactStateNormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsInteger,
mtrapargsString04, mtrapargsInteger02,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A discrete input contact on the device has changed to its normal state.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input contact number.
The fifth argument is the input contact name.
The sixth argument is the input contact state (1=CLOSED, 2=OPEN).
The seventh argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
--#TYPE "APC: Discrete input contact has changed to its normal state."
--#SUMMARY "Discrete input contact has changed to its normal state."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 558
apcAnalogInputMaxThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Maximum threshold violated on an analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: Maximum threshold violation on analog input."
--#SUMMARY "Max threshold violation on input."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 559
apcAnalogInputMaxThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Maximum threshold violation cleared on the analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: Max threshold violation cleared."
--#SUMMARY "Max threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 560
apcAnalogInputHighThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: High threshold violated on an analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: High threshold violation on analog input."
--#SUMMARY "High threshold violation on input."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 561
apcAnalogInputHighThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: High threshold violation cleared on the analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: High threshold violation cleared."
--#SUMMARY "High threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 562
apcAnalogInputLowThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: Low threshold violated on an analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: Low threshold violation on analog input."
--#SUMMARY "Low threshold violation on input."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 563
apcAnalogInputLowThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Low threshold violation cleared on the analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: Low threshold violation cleared."
--#SUMMARY "Low threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 564
apcAnalogInputMinThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Minimum threshold violated on an analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: Min threshold violation on analog input."
--#SUMMARY "Min threshold violation on input."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 565
apcAnalogInputMinThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Minimum threshold violation cleared on the analog input.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is a secondary device id number.
The fourth argument is the input number.
The fifth argument is the input name."
--#TYPE "APC: Min threshold violation cleared."
--#SUMMARY "Min threshold violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 566
apcDeviceClearLostComms TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Lost communications reset command has been issued.
The first argument is the device serial number.
The second argument is the device name.
The third argument is a secondary device id number."
--#TYPE "APC: Lost communications reset command has been issued."
--#SUMMARY "Lost communications reset command has been issued."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 567
apcDeviceConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A device has been connected to the host.
The first argument is the host serial number.
The second argument is the host name.
The third argument is the device number.
The fourth argument is the device name."
--#TYPE "APC: Device Connected."
--#SUMMARY "Device Connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 568
apcDeviceDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: A device has been disconnected from the host.
The first argument is the host serial number.
The second argument is the host name.
The third argument is the device number.
The fourth argument is the device name."
--#TYPE "APC: Device Disconnected."
--#SUMMARY "Device Disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 569
apcUnregisteredUserAccessDenied TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString04,
mtrapargsInteger, mtrapargsString05, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: An unregistered user has tried to access the device.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argumant is the door identifier.
The fifth argument is the unregistered user's RFID."
--#TYPE "APC: Unregistered user."
--#SUMMARY "Unregistered user."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 570
apcRegisteredUserAccessDenied TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString04,
mtrapargsInteger, mtrapargsString05, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A registered user has been denied access to the device.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argumant is the door identifier.
The fifth argument is the user name."
--#TYPE "APC: Access denied."
--#SUMMARY "Access denied."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 571
apcRegisteredUserConfigChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsString05, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: Registered user configuration change.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the user name."
--#TYPE "APC: Registered user configuration change."
--#SUMMARY "Registered user configuration change."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 572
apcDoorUnlocked TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString04,
mtrapargsInteger, mtrapargsString05, mtrapargsInteger02, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door has been unlocked.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier.
The fifth argument is the door access user.
The sixth argument is the door access type."
--#TYPE "APC: Door unlocked."
--#SUMMARY "Door unlocked."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 573
apcDoorLocked TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString04,
mtrapargsInteger, mtrapargsString05, mtrapargsInteger02, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door has been locked.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier.
The fifth argument is the door access user.
The sixth argument is the door access type."
--#TYPE "APC: Door locked."
--#SUMMARY "Door locked."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 574
apcHandleOpened TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door handle has been opened.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Door handle opened."
--#SUMMARY "Door handle opened."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 575
apcHandleClosed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door handle has been closed.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Door handle closed."
--#SUMMARY "Door handle closed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 576
apcDoorOpened TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door has been opened.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Door opened."
--#SUMMARY "Door opened."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 577
apcDoorClosed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door has been closed.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Door closed."
--#SUMMARY "Door closed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 578
-- trap number 579 available
apcKeyOverrideUnlocked TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: Key override unlock has occurred.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Key override unlock has occurred."
--#SUMMARY "Key override unlock has occurred."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 580
apcKeyOverrideLocked TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: Key override lock has occurred.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Key override lock has occurred."
--#SUMMARY "Key override lock has occurred."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 581
apcForcedEntry TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: A forced entry condition has occurred.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: A forced entry condition has occurred."
--#SUMMARY "A forced entry has occurred."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 582
apcForcedEntryCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A forced entry condition has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: A forced entry condition has been cleared."
--#SUMMARY "A forced entry has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 583
apcRelockTimeout TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: A relock timout has occurred.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Relock timout."
--#SUMMARY "Relock timeout."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 584
apcRelockTimeoutCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A relock timout has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: relock timout has been cleared."
--#SUMMARY "Relock timout has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 585
apcDoorSenseDisconnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: A door sensor was disconnected.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: A door sensor was disconnected."
--#SUMMARY "A door sensor was disconnected."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 586
apcDoorSenseConnected TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A forced entry condition has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: A door sensor was connected."
--#SUMMARY "A door sensor was connected."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 587
apcDoorLostComms TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: Communications have been lost with the door.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: A door has lost communications."
--#SUMMARY "A door has lost communications."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 588
apcDoorEstablishedComms TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: Communications have been established with the door.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: A door has established communications."
--#SUMMARY "A door has established communications."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 589
apcRegisteredUserAccessChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsString05, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: Registered user access changed.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the user name."
--#TYPE "APC: Registered user access change."
--#SUMMARY "Registered user access change."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 590
apcUnregisteredUserStatusChange TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsString05, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: Unregistered user status changed.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the user name."
--#TYPE "APC: Unregistered user status change."
--#SUMMARY "Unregistered user status change."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 591
apcDeviceClearUserConfigs TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: User configurations reset command has been issued.
The first argument is the device serial number.
The second argument is the device name.
The third argument is a secondary device id number."
--#TYPE "APC: User configurations reset command has been issued."
--#SUMMARY "User configurations reset command has been issued."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 592
-- Add more events starting at 600 for UPS Devices
upsBatteryTempSensorFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The battery temperature sensor fault exists."
--#TYPE "APC UPS: The battery temperature sensor fault exists."
--#SUMMARY "The battery temperature sensor fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 600
upsBatteryTempSensorFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The battery temperature sensor fault cleared."
--#TYPE "APC UPS: The battery temperature sensor fault cleared."
--#SUMMARY "The battery temperature sensor fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 601
upsBatterySoftBusStartFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A battery bus soft start fault exists."
--#TYPE "APC UPS: A battery bus soft start fault exists."
--#SUMMARY "A battery bus soft start fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 602
upsBatterySoftBusStartFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A battery bus soft start fault exists cleared."
--#TYPE "APC UPS: A battery bus soft start fault exists cleared."
--#SUMMARY "A battery bus soft start fault exists cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 603
apcOutputShortCircuit TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: An output short circuit condition exists."
--#TYPE "APC Device: An output short circuit condition exists."
--#SUMMARY "An output short circuit condition exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 604
apcOutputShortCircuitCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An output short circuit condition cleared."
--#TYPE "APC Device: An output short circuit condition cleared."
--#SUMMARY "An output short circuit condition cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 605
apcOutputRelayFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: An output relay (or its driver) fault exists."
--#TYPE "APC Device: An output relay (or its driver) fault exists."
--#SUMMARY "An output relay (or its driver) fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 606
apcOutputRelayFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An output relay (or its driver) fault cleared."
--#TYPE "APC Device: An output relay (or its driver) fault cleared."
--#SUMMARY "An output relay (or its driver) fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 607
upsPfcFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A PFC fault exists."
--#TYPE "APC UPS: A PFC fault exists."
--#SUMMARY "A PFC fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 608
upsPfcFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The PFC fault cleared."
--#TYPE "APC UPS: The PFC fault cleared."
--#SUMMARY "The PFC fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 609
apcDcBusOverVoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The DC bus voltage is too high."
--#TYPE "APC Devcie: DC bus voltage is too high."
--#SUMMARY "The DC bus voltage is too high."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 610
apcDcBusOverVoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The DC bus voltage is too high cleared."
--#TYPE "APC Device: The DC bus voltage is too high cleared."
--#SUMMARY "The DC bus voltage is too high cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 611
upsInverterFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The inverter fault exists."
--#TYPE "APC UPS: The inverter fault exists."
--#SUMMARY "The inverter fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 612
upsInverterFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The inverter fault cleared."
--#TYPE "APC UPS: The inverter fault cleared."
--#SUMMARY "The inverter fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 613
apcAdConverterFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The A/D converter fault exists."
--#TYPE "APC Device: The A/D converter fault exists."
--#SUMMARY "The A/D converter fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 614
apcAdConverterFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The A/D converter fault cleared."
--#TYPE "APC Device: The A/D converter fault cleared."
--#SUMMARY "The A/D converter fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 615
apcLogicPowerSupplyFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A logic power supply fault exists."
--#TYPE "APC Device: A logic power supply fault exists."
--#SUMMARY "A logic power supply fault exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 616
apcLogicPowerSupplyFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A logic power supply fault cleared."
--#TYPE "APC Device: A logic power supply fault cleared."
--#SUMMARY "A logic power supply fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 617
apcTransformerDCImbalanceFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The DC component of the transformer's current is too high."
--#TYPE "APC Device: The DC component of the tformer's curr is too high."
--#SUMMARY "The DC component of the transformer's current is too high."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 618
apcTransformerDCImbalanceFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The DC component of the transformer's current is normal."
--#TYPE "APC Device: The DC component of the tformer's curr is normal."
--#SUMMARY "The DC component of the transformer's current is normal."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 619
upsBackfeedRelayFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The backfeed relay (or its driver) has a fault."
--#TYPE "UPS Device: The backfeed relay (or its driver) has a fault."
--#SUMMARY "The backfeed relay (or its driver) has a fault."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 620
upsBackfeedRelayFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: The backfeed relay (or its driver) has a fault cleared."
--#TYPE "UPS Device: The bfeed rly (or its drver) has a flt cleared."
--#SUMMARY "The backfeed relay (or its driver) has a fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 621
upsBypassRelayFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A bypass relay (or its driver) has a fault."
--#TYPE "APC Device: A bypass relay (or its driver) has a fault."
--#SUMMARY "A bypass relay (or its driver) has a fault."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 622
upsBypassRelayFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A bypass relay (or its driver) has a fault cleared."
--#TYPE "APC Device: A bypass relay (or its driver) has a fault cleared."
--#SUMMARY "A bypass relay (or its driver) has a fault cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 623
xPDUBranchCurrentMinAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The current in a branch circuit is outside the limits specified for that
branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps.
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC XPDU: Branch circuit minimum current alarm."
--#SUMMARY "Branch circuit current is below threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 626
xPDUBranchCurrentMinAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a branch circuit is back within the limits
specified for that branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Branch circuit minimum current alarm cleared."
--#SUMMARY "Branch circuit low current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 627
xPDUBranchCurrentMaxAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The current in a branch circuit is outside the limits specified for that
branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps.
The fifth argument is the threshold, in tenths of Amps, above which the alarm was generated."
--#TYPE "APC XPDU: Branch circuit maximum current alarm."
--#SUMMARY "Branch circuit current is above threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 628
xPDUBranchCurrentMaxAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a branch circuit is back within the limits
specified for that branch circuit.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the panel position of the branch circuit (1-based index).
The fourth argument is the measured current in tenths of Amps."
--#TYPE "APC XPDU: Branch circuit maximum current alarm cleared."
--#SUMMARY "Branch circuit high current alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 629
rPDUOutletLowLoad TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletStatusIndex, mtrapargsString }
DESCRIPTION
"WARNING: A Rack PDU has violated the outlet low load threshold.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number."
--#TYPE "APC Rack PDU: Violation of outlet low load threshold."
--#SUMMARY "A Rack PDU has violated the outlet low load threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 630
rPDUOutletLowLoadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletStatusIndex, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The outlet low load condition on a Rack PDU has been
cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number."
--#TYPE "APC Rack PDU: Low load condition cleared."
--#SUMMARY "The low load condition on a Rack PDU has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 631
rPDUOutletNearOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletStatusIndex, mtrapargsString }
DESCRIPTION
"WARNING: A Rack PDU is near an outlet overload condition.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number."
--#TYPE "APC Rack PDU: Near an overload condition."
--#SUMMARY "A Rack PDU is near an outlet overload condition."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 632
rPDUOutletNearOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletStatusIndex, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The outlet near overload condition on a Rack PDU has
been cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number."
--#TYPE "APC Rack PDU: Outlet Near overload condition has cleared."
--#SUMMARY "Rack PDU outlet near overload condition has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 633
rPDUOutletOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletStatusIndex, mtrapargsString }
DESCRIPTION
"SEVERE: A Rack PDU is in an overload condition.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number."
--#TYPE "APC Rack PDU: Outlet Overload condition."
--#SUMMARY "A Rack PDU is in an outlet overload condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 634
rPDUOutletOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
rPDUOutletStatusIndex, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The outlet overload condition on a Rack PDU has been
cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number."
--#TYPE "APC Rack PDU: Overload condition has cleared."
--#SUMMARY "The outlet overload condition on a Rack PDU has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 635
apcTestTrap TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Trap used to test SNMP trap functionality.
The first argument is a place holder for test variables."
--#TYPE "APC: Test trap."
--#SUMMARY "Test Trap."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 636
baseFanFailureCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Base module fan has been repaired"
--#TYPE "APC UPS: Base module fan has been repaired"
--#SUMMARY "The base module fan has been repaired."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 637
atsLowLoad TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
atsOutputPhaseIndex, atsOutputBank, mtrapargsString }
DESCRIPTION
"WARNING: ATS has violated the bank or phase low load threshold.
The first argument is the serial number.
The second argument is the product name.
The third argument is the phase number
The fourth argument is the bank number. -1 is returned if bank does not exist."
--#TYPE "APC ATS: Violation of bank or phase low load threshold."
--#SUMMARY "ATS has violated the bank or phase low load threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 638
atsLowLoadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
atsOutputPhaseIndex, atsOutputBank, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The bank or phase low load condition on an ATS has been
cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is the phase number
The fourth argument is the bank number. -1 is returned if bank does not exist."
--#TYPE "APC ATS: Low load condition cleared."
--#SUMMARY "The low load condition on an ATS has been cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 639
atsNearOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
atsOutputPhaseIndex, atsOutputBank, mtrapargsString }
DESCRIPTION
"WARNING: ATS has violated the bank or phase near overload threshold.
The first argument is the serial number.
The second argument is the product name.
The third argument is the phase number
The fourth argument is the bank number. -1 is returned if bank does not exist."
--#TYPE "APC ATS: Near an overload condition."
--#SUMMARY "ATS is near a bank or phase overload condition."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 640
atsNearOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
atsOutputPhaseIndex, atsOutputBank, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The bank or phase near overload condition on an ATS has
been cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is the phase number
The fourth argument is the bank number. -1 is returned if bank does not exist."
--#TYPE "APC ATS: Bank or phase near overload condition has cleared."
--#SUMMARY "ATS bank or phase near overload condition has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 641
atsOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
atsOutputPhaseIndex, atsOutputBank, mtrapargsString }
DESCRIPTION
"SEVERE: ATS is in an overload condition.
The first argument is the serial number.
The second argument is the product name.
The third argument is the phase number.
The fourth argument is the bank number. -1 is returned if bank does not exist."
--#TYPE "APC ATS: Bank or Phase Overload condition."
--#SUMMARY "ATS is in overload condition."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 642
atsOverloadCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
atsOutputPhaseIndex, atsOutputBank, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The bank or phase overload condition on an ATS has been
cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is the phase number.
The fourth argument is the bank number. -1 is returned if bank does not exist."
--#TYPE "APC ATS: Overload condition has cleared."
--#SUMMARY "The bank or phase overload condition on an ATS has cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 643
atsRMSOverVoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Overvoltage condition violated.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: Overvoltage condition violated."
--#SUMMARY "Overvoltage condition violated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 644
atsRMSOverVoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Overvoltage condition cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: Overvoltage condition cleared."
--#SUMMARY "Overvoltage condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 645
atsRMSUnderVoltage TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Undervoltage condition violated.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: Undervoltage condition violated."
--#SUMMARY "Undervoltage condition violated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 646
atsRMSUnderVoltageCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Undervoltage condition cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: Undervoltage condition cleared."
--#SUMMARY "Undervoltage condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 647
atsRMSOverFrequency TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: OverFrequency condition violated.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: OverFrequency condition violated."
--#SUMMARY "OverFrequency condition violated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 648
atsRMSOverFrequencyCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: OverFrequency condition cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: OverFrequency condition cleared."
--#SUMMARY "OverFrequency condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 649
atsRMSUnderFrequency TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: UnderFrequency condition violated.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: UnderFrequency condition violated."
--#SUMMARY "UnderFrequency condition violated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 650
atsRMSUnderFrequencyCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UnderFrequency condition cleared.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: UnderFrequency condition cleared."
--#SUMMARY "UnderFrequency condition cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 651
-- MODULAR POWER DISTRIBUTION SYSTEM
isxModularDistributionCommLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: Communication with a metering segment of the modular
distribution system has been lost.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the segment number.
The fourth argument describes the modules served by this metering segment."
--#TYPE "APC MDS: Com lost in modular distribution system."
--#SUMMARY "Modular distribution communication lost."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 652
isxModularDistributionCommEstablished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication with a metering segment of the modular
distribution system has been restored.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the segment number.
The fourth argument describes the modules served by this metering segment."
--#TYPE "APC MDS: Com restored in modular distribution system."
--#SUMMARY "Modular distribution communication restored."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 653
isxModularDistributionModuleInserted TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A distribution module has been inserted into the system.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module location number."
--#TYPE "APC MDS: Distribution module inserted."
--#SUMMARY "Distribution module inserted."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 654
isxModularDistributionModuleRemoved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A distribution module has been removed from the system.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module location number."
--#TYPE "APC MDS: Distribution module removed."
--#SUMMARY "Distribution module removed."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 655
isxModularBreakerOpenAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: A distribution module breaker is open and in an alarm condition.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the module breaker(s) (1=L1, 2=L2, 3=L3, 4=L12, 5=L23, 6=L123).
The fifth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution breaker open alarm."
--#SUMMARY "Distribution breaker open alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 656
isxModularBreakerOpenAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An alarm caused by a distribution breaker being open has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker(s) (1=L1, 2=L2, 3=L3, 4=L12, 5=L23, 6=L123).
The fifth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution breaker open alarm cleared."
--#SUMMARY "Distribution breaker open alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 657
isxModularMinCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: The current in a distribution module is below the minimum/critical
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution minimum current alarm."
--#SUMMARY "Distribution current is below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 658
isxModularMinCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution module is no longer below the minimum/critical
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution minimum current alarm cleared."
--#SUMMARY "Distribution current no longer below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 659
isxModularLowCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: The current in a distribution module is below the low/warning
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution low current alarm."
--#SUMMARY "Distribution current is below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 660
isxModularLowCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution module is no longer below the low/warning
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution low current alarm cleared."
--#SUMMARY "Distribution current no longer below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 661
isxModularHighCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: The current in a distribution module is above the high/warning
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution high current alarm."
--#SUMMARY "Distribution current is above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 662
isxModularHighCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution module is no longer above the high/warning
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution high current alarm cleared."
--#SUMMARY "Distribution current no longer above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 663
isxModularMaxCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: The current in a distribution module is above the maximum/critical
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution maximum current alarm."
--#SUMMARY "Distribution current is above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 664
isxModularMaxCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution module is no longer above the maximum/critical
limit specified for the circuit/cable.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the module number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the circuit/cable fed by this breaker."
--#TYPE "APC MDS: Distribution maximum current alarm cleared."
--#SUMMARY "Distribution current no longer above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 665
isxModularSubfeedBreakerOpenAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: A distribution subfeed breaker is open and in an alarm condition.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed breaker open alarm."
--#SUMMARY "Distribution subfeed breaker open alarm."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 666
isxModularSubfeedBreakerOpenAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An alarm caused by a distribution subfeed breaker being open has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed breaker open alarm cleared."
--#SUMMARY "Distribution subfeed breaker open alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 667
isxModularSubfeedMinCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: The current in a distribution subfeed is below the minimum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed minimum current alarm."
--#SUMMARY "Distribution subfeed current is below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 668
isxModularSubfeedMinCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution subfeed is no longer below the minimum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed minimum current alarm cleared."
--#SUMMARY "Distribution subfeed current no longer below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 669
isxModularSubfeedLowCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: The current in a distribution subfeed is below the low/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed low current alarm."
--#SUMMARY "Distribution subfeed current is below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 670
isxModularSubfeedLowCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution subfeed is no longer below the low/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed low current alarm cleared."
--#SUMMARY "Distribution subfeed current is no longer below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 671
isxModularSubfeedHighCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"WARNING: The current in a distribution subfeed is above the high/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed high current alarm."
--#SUMMARY "Distribution subfeed current is above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 672
isxModularSubfeedHighCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution subfeed is no longer above the high/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed high current alarm cleared."
--#SUMMARY "Distribution subfeed current no longer above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 673
isxModularSubfeedMaxCurrentThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsInteger02, mtrapargsString04, mtrapargsString }
DESCRIPTION
"SEVERE: The current in a distribution subfeed is above the maximum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the threshold, in tenths of Amps, from which the alarm was generated.
The sixth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed maximum current alarm."
--#SUMMARY "Distribution subfeed current is above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 674
isxModularSubfeedMaxCurrentThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger03,
mtrapargsString04, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The current in a distribution subfeed is no longer above the maximum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the subfeed number.
The fourth argument is the breaker/phase index (1=L1, 2=L2, 3=L3).
The fifth argument is the load name associated with the subfeed."
--#TYPE "APC MDS: Distribution subfeed maximum current alarm cleared."
--#SUMMARY "Distribution subfeed current no longer above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 675
isxModularTotalOutputCurrentMinThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The total output current of the distribution is below the minimum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC MDS: Total distribution output minimum current alarm."
--#SUMMARY "Distribution total current is below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 676
isxModularTotalOutputCurrentMinThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The total output current of the distribution is no longer below the minimum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Total output minimum current alarm cleared."
--#SUMMARY "Distribution total current no longer below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 677
isxModularTotalOutputCurrentLowThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: The total output current of the distribution is below the low/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC MDS: Total output low current alarm."
--#SUMMARY "Distribution total current is below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 678
isxModularTotalOutputCurrentLowThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The total output current of the distribution is no longer below the low/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Total output low current alarm cleared."
--#SUMMARY "Distribution total current no longer below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 679
isxModularTotalOutputCurrentHighThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: The total output current of the distribution is above the high/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC MDS: Total output high current alarm."
--#SUMMARY "Distribution total current is above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 680
isxModularTotalOutputCurrentHighThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The total output current of the distribution is no longer above the high/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Total output high current alarm cleared."
--#SUMMARY "Distribution total current no longer above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 681
isxModularTotalOutputCurrentMaxThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The total output current of the distribution is above the maximum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Amps, from which the alarm was generated."
--#TYPE "APC MDS: Total output maximum current alarm."
--#SUMMARY "Distribution total current is above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 682
isxModularTotalOutputCurrentMaxThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The total output current of the distribution is no longer above the maximum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Total output maximum current alarm cleared."
--#SUMMARY "Distribution total current no longer above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 683
isxModularOutputVoltageMinThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The distribution output voltage is below the minimum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC MDS: Distribution minimum output voltage alarm."
--#SUMMARY "Distribution output voltage is below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 684
isxModularOutputVoltageMinThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The distribution output voltage is no longer below the minimum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Distribution minimum output voltage alarm cleared."
--#SUMMARY "Distribution output voltage no longer below the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 685
isxModularOutputVoltageLowThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: The distribution output voltage is below the low/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC MDS: Distribution low output voltage alarm."
--#SUMMARY "Distribution output voltage is below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 686
isxModularOutputVoltageLowThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The distribution output voltage is no longer below the low/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Distribution low output voltage alarm cleared."
--#SUMMARY "Distribution output voltage no longer below the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 687
isxModularOutputVoltageHighThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: The distribution output voltage is above the high/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC MDS: Distribution high output voltage alarm."
--#SUMMARY "Distribution output voltage is above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 688
isxModularOutputVoltageHighThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The distribution output voltage is no longer above the high/warning limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Distribution high output voltage alarm cleared."
--#SUMMARY "Distribution output voltage no longer above the warning threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 689
isxModularOutputVoltageMaxThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: The distribution output voltage is above the maximum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3).
The fourth argument is the threshold, in tenths of Volts, from which the alarm was generated."
--#TYPE "APC MDS: Distribution maximum output voltage alarm."
--#SUMMARY "Distribution output voltage is above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 690
isxModularOutputVoltageMaxThresholdViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The distribution output voltage is no longer above the maximum/critical limit specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the phase index (1=L1, 2=L2, 3=L3)."
--#TYPE "APC MDS: Distribution maximum output voltage alarm cleared."
--#SUMMARY "Distribution output voltage no longer above the critical threshold."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 691
apcDoorClosedImproperly TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: A door has been closed improperly.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Door closed improperly."
--#SUMMARY "Door closed improperly."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 692
apcDoorClosedImproperlyCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: A door is no longer closed improperly.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: Door no longer closed improperly."
--#SUMMARY "Door no longer closed improperly."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 693
apcUserScheduleViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"SEVERE: A user has had a door opened past the scheduled access period.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: User schedule violated."
--#SUMMARY "User schedule violated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 694
apcUserScheduleViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03,
mtrapargsString04, mtrapargsInteger, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: User schedule violation has been cleared.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the host device location.
The fourth argument is the door identifier, (1=front, 2=rear)."
--#TYPE "APC: User schedule violation cleared."
--#SUMMARY "User schedule violation cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 695
isxModularOutputFrequencyThresholdViolation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: The distribution output frequency is outside of the operating range specified.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the threshold, in tenths of Hertz, from which the alarm was generated."
--#TYPE "APC MDS: Distribution output frequency out of range."
--#SUMMARY "Distribution output frequency out of range."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 696
isxModularOutputFrequencyViolationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The distribution output frequency is no longer out of range.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC MDS: Distribution output frequency no longer out of range."
--#SUMMARY "Distribution output frequency no longer out of range."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 697
atsSourceStatusFail TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: ATS Source failed.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: ATS Source failed."
--#SUMMARY "ATS Source failed."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 698
atsSourceStatusOk TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: ATS Source OK.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the source: 0=A, 1=B."
--#TYPE "APC ATS: ATS Source OK."
--#SUMMARY "ATS Source OK."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 699
atsHardwareStatusFail TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: ATS display board hardware failed.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the failed hardware:
0= Phase LEDs/Push-button hardware failure
1= Seven-segment display hardware failure."
--#TYPE "APC ATS: ATS display board hardware failed."
--#SUMMARY "ATS display board hardware failed."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 700
atsHardwareStatusOk TRAP-TYPE
ENTERPRISE apc
VARIABLES { atsIdentSerialNumber, atsConfigProductName,
mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: ATS display board hardware ok.
The first argument is the serial number.
The second argument is the product name.
The third argument is an integer representing the hardware:
0= Phase LEDs/Push-button hardware failure
1= Seven-segment display hardware failure."
--#TYPE "APC ATS: ATS display board hardware ok."
--#SUMMARY "ATS display board hardware ok."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 701
atsControllerRestart TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: ATS Controller restarted."
--#TYPE "APC ATS: ATS Controller restarted."
--#SUMMARY "ATS Controller restarted."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 702
inputWarningError TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Input warning error has been detected.
The first variable is the fault condition."
--#TYPE "APC UPS: Input warning error has been detected."
--#SUMMARY "UPS Input warning error has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 703
inputOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Input warning error has been cleared.
The first variable is the fault condition."
--#TYPE "APC UPS: Input warning error has been cleared."
--#SUMMARY "UPS Input warning error has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 704
bypassWarningError TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Bypass warning error has been detected.
The first variable is the fault condition."
--#TYPE "APC UPS: Bypass warning error has been detected."
--#SUMMARY "UPS Bypass warning error has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 705
bypassOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Bypass warning error has been cleared.
The first variable is the fault condition."
--#TYPE "APC UPS: Bypass warning error has been cleared."
--#SUMMARY "UPS Bypass warning error has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 706
communicationWarningError TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: Communication warning error has been detected.
The first variable is the fault condition."
--#TYPE "APC UPS: Communication warning error has been detected."
--#SUMMARY "UPS Communication warning error has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 707
communicationOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Communication warning error has been cleared.
The first variable is the fault condition."
--#TYPE "APC UPS: Communication warning error has been cleared."
--#SUMMARY "UPS Communication warning error has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 708
powerModuleSevereError TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: Power module severe error has been detected.
The first variable is the fault condition."
--#TYPE "APC UPS: Power module severe error has been detected."
--#SUMMARY "UPS Power module severe error has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 709
powerModuleOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Power module severe error has been cleared.
The first variable is the fault condition."
--#TYPE "APC UPS: Power module severe error has been cleared."
--#SUMMARY "UPS Power module severe error has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 710
outputVoltageWaveformError TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Output voltage waveform error has been detected."
--#TYPE "APC UPS: Output voltage waveform error has been detected."
--#SUMMARY "UPS output voltage waveform error has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 711
outputVoltageWaveformOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Output voltage waveform is OK."
--#TYPE "APC UPS: Output voltage waveform is OK"
--#SUMMARY "UPS output voltage waveform is OK."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 712
bypassStaticSwitchOverload TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Overload on bypass static switch has been detected."
--#TYPE "APC UPS: Overload on bypass static switch has been detected."
--#SUMMARY "Overload on bypass static switch has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 713
noOverloadOnBypassStaticSwitch TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Overload on static bypass switch no longer present."
--#TYPE "APC UPS: Overload on static bypass switch no longer present."
--#SUMMARY "Overload on static bypass switch no longer present."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 714
batteryVoltageCollapse TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Battery voltage collapse has been detected."
--#TYPE "APC UPS: Battery voltage collapse has been detected."
--#SUMMARY "Battery voltage collapse has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 715
batteryVoltageOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Battery voltage OK."
--#TYPE "APC UPS: Battery voltage OK."
--#SUMMARY "Battery voltage OK."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 716
overloadOnInstallation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Overload on installation has been detected."
--#TYPE "APC UPS: Overload on installation has been detected."
--#SUMMARY "Overload on installation has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 717
noOverloadOnInstallation TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Overload on installation no longer present."
--#TYPE "APC UPS: Overload on installation no longer present."
--#SUMMARY "Overload on installation no longer present."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 718
bypassStaticSwitchError TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Bypass static switch error, module has critical error."
--#TYPE "APC UPS: Bypass static switch error, module has critical error."
--#SUMMARY "Bypass static switch error, module has critical error."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 719
bypassStaticSwitchOK TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Bypass static switch OK."
--#TYPE "APC UPS: Bypass static switch OK."
--#SUMMARY "Bypass static switch OK."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 720
forcedBypassSwitchActivated TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Forced bypass switch has been activated."
--#TYPE "APC UPS: Forced bypass switch has been activated."
--#SUMMARY "Forced bypass switch has been activated."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 721
forcedBypassSwitchReleased TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Forced bypass switch has been released."
--#TYPE "APC UPS: Forced bypass switch has been released."
--#SUMMARY "Forced bypass switch has been released."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 722
epoActivated TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Emergency Power Off (EPO) switch has been activated."
--#TYPE "APC Emergency Power Off (EPO) switch has been activated."
--#SUMMARY "Emergency Power Off (EPO) switch has been activated."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 723
xATSS1BadPhaseRotation TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
DESCRIPTION
"SEVERE: The device's source 1 phase rotation is bad.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: S1 bad phase rotation alarm."
--#SUMMARY "Phase rotation on source 1 is bad."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 724
xATSS1BadPhaseRotationCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: The device's source 1 phase rotation is back to normal.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: S1 phase rotation back to normal."
--#SUMMARY "S1 phase rotation back to normal."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 725
xATSS1BadPhaseBalance TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
mtrapargsString}
DESCRIPTION
"SEVERE: The device's source 1 phase balance is out of bounds.
The first argument is the host device serial number.
The second argument is the host device name.
The third argument is the minimum phase balance as a percentage."
--#TYPE "APC XATS: S1 phase imbalance exceeds threshold alarm."
--#SUMMARY "Phase imbalance on source 1 exceeds threshold."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 726
xATSS1BadPhaseBalanceCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString}
DESCRIPTION
"INFORMATIONAL: The device's source 1 phase balance is back to normal.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC XATS: S1 phase balance back to normal."
--#SUMMARY "S1 phase balance back to normal."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 727
isxModularTransformerOverheating TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString }
DESCRIPTION
"SEVERE: The distribution transformer temperature is too hot.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC MDS: Transformer overheating."
--#SUMMARY "Distribution transformer temperature is too hot."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 728
isxModularTransformerOverheatingCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The distribution transformer temperature has returned to normal.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC MDS: Transformer temperature has returned to normal."
--#SUMMARY "Distribution transformer temperature has returned to normal."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 729
apcInternalCommunicationFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: An internal UPS communication fault exists."
--#TYPE "APC Device: An internal UPS communication fault exists."
--#SUMMARY "An internal UPS communication fault exists."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 730
apcInternalCommunicationFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An internal UPS communication fault no longer exists."
--#TYPE "APC Device:An internal UPS communication fault no longer exists."
--#SUMMARY "An internal UPS communication fault no longer exists."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 731
upsOutletGroupCommand TRAP-TYPE
ENTERPRISE apc
VARIABLES { upsOutletGroupControlIndex, mtrapargsString }
DESCRIPTION
"WARNING: The specified Outlet Group command has been issued."
--#TYPE "APC UPS: Outlet Group command issued."
--#SUMMARY "Outlet Group command issued."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 732
onbatterycommunicationLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Communication to the UPS when the UPS is on Battery. Steps
to reestablish communication are in progress."
--#TYPE "APC UPS: Communication lost"
--#SUMMARY "Communication lost between the agent and the UPS when UPS is on Battery."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 733
upsCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"SEVERE: A UPS critical condition was detected.
The first variable is the error condition text message.
The second variable is the error number."
--#TYPE "UPS: A critical condition has been detected."
--#SUMMARY "A critical condition has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 734
upsCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A UPS critical condition has been cleared.
The first variable is the fault condition."
--#TYPE "UPS: A critical condition has been cleared."
--#SUMMARY "A critical condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 735
upsWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: A UPS warning condition has been detected.
The first variable is the fault condition."
--#TYPE "UPS: A warning condition has been detected."
--#SUMMARY "A warning condition has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 736
upsWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"WARNING: A UPS warning condition has been cleared.
The first variable is the fault condition."
--#TYPE "UPS: A warning condition has been cleared."
--#SUMMARY "A warning condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 737
upsInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A UPS informational condition has been detected.
The first variable is the fault condition."
--#TYPE "UPS: Informational condition detected."
--#SUMMARY "An informational condition has been detected."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 738
upsInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A UPS informational condition has been cleared.
The first variable is the fault condition."
--#TYPE "UPS: Informational condition cleared."
--#SUMMARY "An informational condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 739
isxcInformationalAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An ISXC Alarm exists.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Informational Alarm exists."
--#SUMMARY "An ISXC Informational Alarm exists."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 740
isxcInformationalAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An ISXC Alarm has been cleared.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Informational Alarm has been cleared."
--#SUMMARY "An ISXC Informational Alarm has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 741
isxcWarningAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"WARNING: An ISXC Alarm exists.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Warning Alarm exists."
--#SUMMARY "An ISXC Warning Alarm exists."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 742
isxcWarningAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"WARNING: An ISXC Alarm has been cleared.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Warning Alarm has been cleared."
--#SUMMARY "An ISXC Warning Alarm has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 743
isxcErrorAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"ERROR: An ISXC Alarm exists.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Error Alarm exists."
--#SUMMARY "An ISXC Error Alarm exists."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 744
isxcErrorAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"ERROR: An ISXC Alarm has been cleared.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Error Alarm has been cleared."
--#SUMMARY "An ISXC Error Alarm has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 745
isxcCriticalAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"CRITICAL: An ISXC Alarm exists.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Critical Alarm exists."
--#SUMMARY "An ISXC Critical Alarm exists."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 746
isxcCriticalAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"CRITICAL: An ISXC Alarm has been cleared.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Critical Alarm has been cleared."
--#SUMMARY "An ISXC Critical Alarm has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 747
isxcFailureAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"FAILURE: An ISXC Alarm exists.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Failure Alarm exists."
--#SUMMARY "An ISXC Failure Alarm exists."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 748
isxcFailureAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02,
mtrapargsOctetString,
mtrapargsInteger,
mtrapargsString03,
mtrapargsOctetString02,
mtrapargsString04,
mtrapargsOctetString03,
mtrapargsString05,
mtrapargsString06,
mtrapargsString07,
mtrapargsOctetString04,
mtrapargsOctetString05,
mtrapargsString08,
mtrapargsOctetString06,
mtrapargsOctetString07,
mtrapargsInteger02,
mtrapargsInteger03,
mtrapargsOctetString08,
mtrapargsString }
DESCRIPTION
"FAILURE: An ISXC Alarm has been cleared.
The first argument is the unique ISXC alarm ID.
The second argument is the ISXC alarm label as a UTF8 string.
The third argument is the ISXC alarm code.
The fourth argument is the unique ISXC device ID.
The fifth argument is the ISXC device label as a UTF8 string.
The sixth argument is the ISXC parent host.
The seventh argument is the ISXC device type as a UTF8 string.
The eighth argument is the device serial number.
The ninth argument is the device model number.
The tenth argument is the device host.
The eleventh argument is the device location as a UTF8 string.
The twelfth argument is the device contact as a UTF8 string.
The thirteenth argument is the unique ISXC sensor ID.
The fourteenth argument is the ISXC sensor label as a UTF8 string.
The fifteenth argument is the sensor value as a UTF8 string.
The sixteenth argument is the ISXC alarm start time.
The seventeenth argument is the ISXC alarm resolution time.
The eighteenth argument is the description as a UTF8 string."
--#TYPE "APC ISXC: An ISXC Failure Alarm has been cleared."
--#SUMMARY "An ISXC Failure Alarm has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 749
-- rPDU2g Trap Section
rpduCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"SEVERE: A RPDU critical condition has been detected.
The first variable is the serial number.
The second variable is the device name.
The third variable is the error number.
The fourth variable is the device number.
The fifth variable is the instance number.
The sixth variable is the trap text message."
--#TYPE "RPDU: A critical condition has been detected."
--#SUMMARY "A critical condition has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 750
rpduCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A RPDU critical condition has been cleared.
The first variable is the serial number.
The second variable is the device name.
The third variable is the error number.
The fourth variable is the device number.
The fifth variable is the instance number.
The sixth variable is the trap text message."
--#TYPE "RPDU: A critical condition has been cleared."
--#SUMMARY "A critical condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 751
rpduWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: A RPDU warning condition has been detected.
The first variable is the serial number.
The second variable is the device name.
The third variable is the error number.
The fourth variable is the device number.
The fifth variable is the instance number.
The sixth variable is the trap text message."
--#TYPE "RPDU: A warning condition has been detected."
--#SUMMARY "A warning condition has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 752
rpduWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"WARNING: A RPDU warning condition has been cleared.
The first variable is the serial number.
The second variable is the device name.
The third variable is the error number.
The fourth variable is the device number.
The fifth variable is the instance number.
The sixth variable is the trap text message."
--#TYPE "RPDU: A warning condition has been cleared."
--#SUMMARY "A warning condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 753
rpduInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A RPDU informational condition has been detected.
The first variable is the serial number.
The second variable is the device name.
The third variable is the error number.
The fourth variable is the device number.
The fifth variable is the instance number.
The sixth variable is the trap text message."
--#TYPE "RPDU: Informational condition detected."
--#SUMMARY "An informational condition has been detected."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 754
rpduInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A RPDU informational condition has been cleared.
The first variable is the serial number.
The second variable is the device name.
The third variable is the error number.
The fourth variable is the device number.
The fifth variable is the instance number.
The sixth variable is the trap text message."
--#TYPE "RPDU: Informational condition cleared."
--#SUMMARY "An informational condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 755
isxModularCoolingFanAlarm TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString }
DESCRIPTION
"SEVERE: The device's internal cooling fans have failed.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC MDS: Cooling fan failure."
--#SUMMARY "Cooling fan failure."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 756
isxModularCoolingFanAlarmCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The device's internal cooling fans are now functioning properly.
The first argument is the host device serial number.
The second argument is the host device name."
--#TYPE "APC MDS: Cooling fan alarm cleared."
--#SUMMARY "Cooling fan alarm cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 757
upsFirmwareUpdateStarted TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Updating UPS firmware."
--#TYPE "APC UPS: Updating firmware"
--#SUMMARY "The UPS has started a firmware update."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 758
upsFirmwareUpdateFinished TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Finished updating UPS firmware."
--#TYPE "APC UPS: Finished firmware update"
--#SUMMARY "The UPS has finished the firmware update."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 759
upsFirmwareUpdateSucceeded TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS firmware update succeeded."
--#TYPE "APC UPS: Firmware update succeeded"
--#SUMMARY "The UPS has successfully completed a firmware update."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 760
upsFirmwareUpdateFailed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: UPS firmware update failed."
--#TYPE "APC UPS: Firmware update failed"
--#SUMMARY "The UPS failed to complete a firmware update."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 761
upsHasNoValidFirmware TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: UPS has no valid firmware."
--#TYPE "APC UPS: No firmware"
--#SUMMARY "The UPS does not have a valid firmware."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 762
upsHasNoValidFirmwareCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS now has a valid firmware."
--#TYPE "APC UPS: Now has valid firmware"
--#SUMMARY "The UPS now has a valid firmware."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 763
upsLocalDisplayButtonFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A local display button fault exists."
--#TYPE "APC UPS: A local display button fault exists."
--#SUMMARY "The UPS has detected a local display button error. The button may be stuck in the closed position."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 767
upsLocalDisplayButtonFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A local display button fault no longer exists."
--#TYPE "APC UPS: A local display button fault no longer exists."
--#SUMMARY "The UPS no longer detects a local display button error."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 768
upsNeedsFactorySetupFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: UPS needs factory setup."
--#TYPE "APC UPS: needs factory setup."
--#SUMMARY "The UPS is missing factory configuration information. The UPS needs to be set up by the factory."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 769
upsNeedsFactorySetupFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS no longer needs factory setup."
--#TYPE "APC UPS: no longer needs factory setup."
--#SUMMARY "The UPS now has the required factory configuration information."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 770
upsEPOActive TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Emergency Power Off (EPO) active."
--#TYPE "APC UPS: Emergency Power Off (EPO) active."
--#SUMMARY "The EPO contact on the UPS was activated causing the UPS to turn off."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 771
upsEPOActiveCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Emergency Power Off (EPO) now inactive."
--#TYPE "APC UPS: Emergency Power Off (EPO) now inactive."
--#SUMMARY "The EPO contact on the UPS is no longer activated. The UPS may be turned on."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 772
upsFirmwareMismatch TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: A firmware mismatch error exists."
--#TYPE "APC UPS: A firmware mismatch error exists."
--#SUMMARY "Parts of the system are running firmware versions not designed to work together. This may be due to an incomplete firmware update."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 773
upsFirmwareMismatchCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A firmware mismatch error no longer exists."
--#TYPE "APC UPS: A firmware mismatch error no longer exists."
--#SUMMARY "The firmware versions on the system are now compatible."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 774
upsOscillatorFailed TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: An oscillator error exists."
--#TYPE "APC UPS: An oscillator error exists."
--#SUMMARY "One or more system clocks no longer keeps time due to a failed oscillator. Depending on the failure, this may result in a loss of time keeping, or render parts of the system inoperable."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE NONOPERATIONAL
::= 775
upsOscillatorFailedCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: An oscillator error no longer exists."
--#TYPE "APC UPS: An oscillator error no longer exists."
--#SUMMARY "The oscillator error no longer exists."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 776
upsOnBatteryDueToFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: The UPS is on battery due to an error.
Symmetra UPSes: Intelligence module has reported being in self-test for
too long. When this happens, the UPS is not usually in self-test, but the
batteries are draining slowly. If left uncorrected, the batteries will
become depleted and the UPS will not be able to turn on. If UPS has at
least N+1 redundancy, check power modules one by one to determine which
keeps the UPS in self-test. Once identified, replace the module."
--#TYPE "APC UPS: The UPS is on battery due to an error."
--#SUMMARY "The UPS is on battery due to an error."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 777
upsOnBatteryDueToFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: The UPS is no longer on battery due to an error."
--#TYPE "APC UPS: The UPS is no longer on battery due to an error."
--#SUMMARY "The UPS is no longer on battery due to an error."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 778
pcnsCriticalEventActive TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: PowerChute Network Shutdown has begun a safe shutdown of the host."
--#TYPE "APC CODE: PowerChute Network Shutdown has begun a safe shutdown of the host."
--#SUMMARY "Safe Shutdown of host initiated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 779
pcnsCriticalEventResolved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute Network Shutdown critical event resolved. Safe shutdown will continue."
--#TYPE "APC CODE: PowerChute Network Shutdown critical event resolved. Safe shutdown will continue."
--#SUMMARY "Critical event resolved."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 780
pcnsNetworkComsLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: PowerChute cannot communicate with NMC"
--#TYPE "APC CODE: PowerChute cannot communicate with NMC"
--#SUMMARY "PowerChute cannot communicate with NMC"
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 781
pcnsNetworkComsLostResolved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute can communicate with NMC again."
--#TYPE "APC CODE: PowerChute can communicate with NMC again."
--#SUMMARY "PowerChute can communicate with NMC again."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 782
pcnsNMCComsLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: NMC cannot communicate with UPS."
--#TYPE "APC CODE: NMC cannot communicate with UPS."
--#SUMMARY "NMC cannot communicate with UPS."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 783
pcnsNMCComsLostResolved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: NMC can communicate with UPS again."
--#TYPE "APC CODE: NMC can communicate with UPS again."
--#SUMMARY "NMC can communicate with UPS again."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 784
pcnsTest TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute has sent a test trap."
--#TYPE "APC CODE: PowerChute has sent a test trap."
--#SUMMARY "PowerChute has sent a test trap."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 785
pcnsUpdateAvailable TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute has detected that a newer version is available."
--#TYPE "APC CODE: PowerChute has detected that a newer version is available."
--#SUMMARY "PowerChute has detected that a newer version is available."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 786
temporaryBypass TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: UPS on temporary bypass"
--#TYPE "APC UPS: On temporary bypass"
--#SUMMARY "The UPS is on temporary bypass."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 787
pcbeCriticalEventActive TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: PowerChute Business Edition has begun a safe shutdown of the host."
--#TYPE "APC CODE: PowerChute Business Edition has begun a safe shutdown of the host."
--#SUMMARY "Safe shutdown of host initiated."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 790
pcbeCriticalEventResolved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute Business Edition critical event resolved. Safe shutdown will continue."
--#TYPE "APC CODE: PowerChute Business Edition critical event resolved. Safe shutdown will continue."
--#SUMMARY "Critical event resolved."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 791
pcbeComsLost TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: PowerChute cannot communicate with UPS"
--#TYPE "APC CODE: PowerChute cannot communicate with UPS"
--#SUMMARY "PowerChute cannot communicate with UPS"
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 792
pcbeComsLostResolved TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute can communicate with UPS again."
--#TYPE "APC CODE: PowerChute can communicate with UPS again."
--#SUMMARY "PowerChute can communicate with UPS again."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 793
pcbeTest TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute has sent a test trap."
--#TYPE "APC CODE: PowerChute has sent a test trap."
--#SUMMARY "PowerChute has sent a test trap."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 794
pcbeUpdateAvailable TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: PowerChute has detected that a newer version is available."
--#TYPE "APC CODE: PowerChute has detected that a newer version is available."
--#SUMMARY "PowerChute has detected that a newer version is available."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 795
-- pMM Trap Section
pmmCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"SEVERE: A PMM critical condition has been detected.
The first variable is the serial number.
The second variable is the device name.
The third variable is the event ID.
The fourth variable is the instance number.
The fifth variable is the trap text message."
--#TYPE "PMM: A critical condition has been detected."
--#SUMMARY "A critical condition has been detected."
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 796
pmmCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A PMM critical condition has been cleared.
The first variable is the serial number.
The second variable is the device name.
The third variable is the event ID.
The fourth variable is the instance number.
The fifth variable is the trap text message."
--#TYPE "PMM: A critical condition has been cleared."
--#SUMMARY "A critical condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 797
pmmWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"WARNING: A PMM warning condition has been detected.
The first variable is the serial number.
The second variable is the device name.
The third variable is the event ID.
The fourth variable is the instance number.
The fifth variable is the trap text message."
--#TYPE "PMM: A warning condition has been detected."
--#SUMMARY "A warning condition has been detected."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 798
pmmWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"WARNING: A PMM warning condition has been cleared.
The first variable is the serial number.
The second variable is the device name.
The third variable is the event ID.
The fourth variable is the instance number.
The fifth variable is the trap text message."
--#TYPE "PMM: A warning condition has been cleared."
--#SUMMARY "A warning condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 799
pmmInformationalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A PMM informational condition has been detected.
The first variable is the serial number.
The second variable is the device name.
The third variable is the event ID.
The fourth variable is the instance number.
The fifth variable is the trap text message."
--#TYPE "PMM: Informational condition detected."
--#SUMMARY "An informational condition has been detected."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 800
pmmInformationalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString02, mtrapargsString03, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A PMM informational condition has been cleared.
The first variable is the serial number.
The second variable is the device name.
The third variable is the event ID.
The fourth variable is the instance number.
The fifth variable is the trap text message."
--#TYPE "PMM: Informational condition cleared."
--#SUMMARY "An informational condition has been cleared."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 801
upsInputContactOutputRelayFault TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: A fault exists in the UPS input contact / output relay hardware."
--#TYPE "APC UPS: Input contact / output relay fault."
--#SUMMARY "Input contact / output relay fault."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 802
upsInputContactOutputRelayFaultCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Fault no longer exists in the UPS input contact / output relay hardware."
--#TYPE "APC UPS: Input contact / output relay fault cleared."
--#SUMMARY "Input contact / output relay fault cleared."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 803
upsAirFilterWarning TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: Air filter requires service."
--#TYPE "APC UPS: Air filter requires service."
--#SUMMARY "Air filter requires service."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 804
upsAirFilterWarningCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Air filter no longer requires service."
--#TYPE "APC UPS: Air filter no longer requires service."
--#SUMMARY "Air filter no longer requires service."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 805
upsBatteryPackIncompatible TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: Incompatible battery pack."
--#TYPE "APC UPS: Incompatible battery pack."
--#SUMMARY "Incompatible battery pack."
--#ARGUMENTS { }
--#SEVERITY SEVERE
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE DEGRADED
::= 806
upsBatteryPackIncompatibleCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: Incompatible battery pack no longer present."
--#TYPE "APC UPS: Incompatible battery pack no longer present."
--#SUMMARY "Incompatible battery pack no longer present."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 807
upsInputContactAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: UPS input contact is in the abnormal state."
--#TYPE "APC UPS: Input contact in abnormal state."
--#SUMMARY "UPS input contact in abnormal state."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 808
upsInputContactAbnormalCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: UPS input contact has returned to its normal
state."
--#TYPE "APC UPS: Input contact has returned to the normal state."
--#SUMMARY "UPS input contact has returned to the normal state."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 809
upsOutputRelayAbnormal TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"WARNING: A UPS output relay has switched to the abnormal state."
--#TYPE "APC UPS: Output relay in abnormal state."
--#SUMMARY "UPS output relay in abnormal state."
--#SEVERITY WARNING
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 810
upsOutputRelayAbnormalCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A UPS output relay has returned to its normal
state."
--#TYPE "APC UPS: Output relay back in normal state."
--#SUMMARY "UPS output relay back in normal state."
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#HELP ""
--#HELPTAG 0
--#STATE OPERATIONAL
::= 811
ePDUCriticalCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: A EPDU critical condition has been detected."
::= 812
ePDUCriticalConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"INFORMATIONAL: A EPDU critical condition has been cleared."
::= 813
ePDUWarningCondition TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: A Easy PDU warning condition has been detected."
::= 814
ePDUWarningConditionCleared TRAP-TYPE
ENTERPRISE apc
VARIABLES { mtrapargsString }
DESCRIPTION
"SEVERE: A Easy PDU warning condition has been cleared."
::= 815
END