792 lines
29 KiB
Plaintext
792 lines
29 KiB
Plaintext
DOCS-SUBMGT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Integer32,
|
|
experimental
|
|
|
|
|
|
-- BITS
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,
|
|
RowStatus,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
docsIfCmtsCmStatusIndex,
|
|
docsIfCmtsCmStatusEntry
|
|
FROM DOCS-IF-MIB; -- RFC2670
|
|
|
|
docsSubMgt MODULE-IDENTITY
|
|
LAST-UPDATED "0007120000Z" -- July 12, 2000
|
|
ORGANIZATION "IETF IPCDN Working Group"
|
|
CONTACT-INFO
|
|
" Wilson Sawyer
|
|
Postal: Arris Interactive
|
|
6 Riverside Drive
|
|
Andover, MA 01810
|
|
U.S.A.
|
|
Phone: +1 978 946 4711
|
|
E-mail: wsawyer@ieee.org"
|
|
DESCRIPTION
|
|
"This is the CMTS centric subscriber management MIB for
|
|
DOCSIS compliant CMTS. This will be rooted in experimental
|
|
space with a future transition to be incorporated into the
|
|
cable device MIB."
|
|
-- temporary: the following to be assigned by RFC editor. For now,
|
|
-- use original experimental docsDev value: { docsDev 4 }
|
|
::= { experimental 83 4 }
|
|
|
|
|
|
docsSubMgtObjects OBJECT IDENTIFIER ::= { docsSubMgt 1 }
|
|
|
|
|
|
IpV4orV6Addr ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP V4 or V6 address expressed as an octet string. The
|
|
zero length string is equal to both 0.0.0.0 and the IPv6 :0
|
|
address."
|
|
SYNTAX OCTET STRING (SIZE (0 | 4 | 16))
|
|
|
|
|
|
|
|
docsSubMgtCpeControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsSubMgtCpeControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the docsIfCmtsCmStatusTable and adds 4
|
|
|
|
|
|
objects which reflect the state of subscriber management on a
|
|
particular CM."
|
|
::= { docsSubMgtObjects 1 }
|
|
|
|
docsSubMgtCpeControlEntry OBJECT-TYPE
|
|
SYNTAX DocsSubMgtCpeControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the docsSubMgtCpeControlTable. All the values
|
|
are either set from the system default, or are set from objects
|
|
included in the DOCSIS registration request sent upstream to
|
|
the CMTS from the CM."
|
|
AUGMENTS { docsIfCmtsCmStatusEntry }
|
|
::= {docsSubMgtCpeControlTable 1 }
|
|
|
|
DocsSubMgtCpeControlEntry ::= SEQUENCE
|
|
{
|
|
docsSubMgtCpeControlMaxCpeIp Integer32,
|
|
docsSubMgtCpeControlActive TruthValue,
|
|
docsSubMgtCpeControlLearnable TruthValue,
|
|
docsSubMgtCpeControlReset TruthValue
|
|
}
|
|
|
|
|
|
docsSubMgtCpeControlMaxCpeIp OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of simultaneous IP addresses permitted behind
|
|
the CM. If this is set to zero, all CPE traffic from the CM is
|
|
dropped. If the provisioning object corresponding to
|
|
docsSubMgtCpeIpTable includes more CPE IP address entries for
|
|
this modem than the value of this object, then this object is
|
|
set to the count of the number of rows in docsSubMgtCpeIpTable
|
|
that have the same docsIfCmtsCmStatusIndex value. (E.g. if the
|
|
CM has 5 IP addresses specified for it, this value is 5). This
|
|
limit applies to learned and docsis-provisioned entries, but
|
|
does not limit entries added through some administrative
|
|
process at the CMTS. If not set through DOCSIS provisioning,
|
|
this object defaults to docsSubMgtCpeMaxIpDefault. Note that
|
|
this object is only meaningful if docsSubMgtCpeControlActive
|
|
is true."
|
|
::= { docsSubMgtCpeControlEntry 1 }
|
|
|
|
docsSubMgtCpeControlActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this is set to true, CMTS based CPE control is active and
|
|
all the actions required by the various filter tables and
|
|
|
|
|
|
controls apply at the CMTS. If this is set to false, no
|
|
subscriber management filtering is done at the CMTS (but other
|
|
filters may apply). If not set through DOCSIS provisioning,
|
|
this object defaults to docsSubMgtCpeActiveDefault."
|
|
::= { docsSubMgtCpeControlEntry 2 }
|
|
|
|
|
|
docsSubMgtCpeControlLearnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this is set to true, the CMTS may learn up to
|
|
docsSubMgtMaxCpeIp addresses (less any DOCSIS-provisioned
|
|
entries) related to this CM. Those IP addresses are added (by
|
|
internal process) to the docsSubMgtCpeIpTable. The nature of the
|
|
learning mechanism is not specified here. If not set through
|
|
DOCSIS provisioning, this object defaults to
|
|
docsSubMgtCpeLearnableDefault. Note that this object is only
|
|
meaningful if docsSubMgtCpeControlActive is true."
|
|
::= { docsSubMgtCpeControlEntry 3 }
|
|
|
|
docsSubMgtCpeControlReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object always returns false on read. If this object is
|
|
set to true, the rows with 'learned' addresses in
|
|
docsSubMgtCpeIpTable for this CM are deleted from that table."
|
|
::= { docsSubMgtCpeControlEntry 4 }
|
|
|
|
docsSubMgtCpeMaxIpDefault OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value for docsSubMgtCpeControlMaxCpeIp if not
|
|
signaled in the DOCSIS Registration request. Upon initial CMTS
|
|
initialization, this defaults to 16."
|
|
::= { docsSubMgtObjects 2 }
|
|
|
|
docsSubMgtCpeActiveDefault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value for docsSubMgtCpeControlActive if not
|
|
signaled in the DOCSIS Registration request. Upon initial CMTS
|
|
initialization, this defaults to false."
|
|
::= { docsSubMgtObjects 3 }
|
|
|
|
docsSubMgtCpeLearnableDefault OBJECT-TYPE
|
|
|
|
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value for docsSubMgtCpeControlLearnable if not
|
|
signaled in the DOCSIS Registration request. Upon initial CMTS
|
|
initialization, this defaults to true."
|
|
::= { docsSubMgtObjects 4 }
|
|
|
|
docsSubMgtCpeIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsSubMgtCpeIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of CPE IP addresses known on a per CM basis."
|
|
::= { docsSubMgtObjects 5 }
|
|
|
|
docsSubMgtCpeIpEntry OBJECT-TYPE
|
|
SYNTAX DocsSubMgtCpeIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the docsSubMgtCpeIpTable. The first index is
|
|
the specific modem we're referring to, the second index is the
|
|
specific CPE IP entry."
|
|
INDEX { docsIfCmtsCmStatusIndex,
|
|
docsSubMgtCpeIpIndex }
|
|
::= {docsSubMgtCpeIpTable 1 }
|
|
|
|
DocsSubMgtCpeIpEntry ::= SEQUENCE
|
|
{
|
|
docsSubMgtCpeIpIndex Integer32,
|
|
docsSubMgtCpeIpAddr IpV4orV6Addr,
|
|
docsSubMgtCpeIpLearned TruthValue
|
|
}
|
|
|
|
|
|
docsSubMgtCpeIpIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this CPE IP address relative to the indexed CM.
|
|
An entry is created either through the included CPE IP addresses
|
|
in the provisioning object, or via learning. If a CMTS receives
|
|
an IP packet from a CM that contains a source IP address which
|
|
does not match one of the docsSubMgtCpeIpAddr entries for this
|
|
CM, one of two things occurs. If the number of entries is less
|
|
than docsSubMgtCpeControlMaxCpeIp, the source address is added to
|
|
the table and the packet is forwarded. If the number of entries
|
|
equals the docsSubMgtCpeControlMaxCpeIp, AND
|
|
docsSubMgtCpeControlActive is true, then the packet is dropped.
|
|
Otherwise the packet is forwarded. "
|
|
|
|
|
|
::= { docsSubMgtCpeIpEntry 1 }
|
|
|
|
docsSubMgtCpeIpAddr OBJECT-TYPE
|
|
SYNTAX IpV4orV6Addr
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address either set from provisioning or learned via
|
|
wiretapping. See docsSubMgtCpeIpIndex for the mechanism."
|
|
::= { docsSubMgtCpeIpEntry 2 }
|
|
|
|
docsSubMgtCpeIpLearned OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, this entry was learned from IP packets sent
|
|
upstream rather than from the provisioning objects."
|
|
::= { docsSubMgtCpeIpEntry 3 }
|
|
|
|
|
|
|
|
-- The generic packet filter table. Note that this just defines the
|
|
-- match criteria. The docsSubMgtCmFilterTable links this table to
|
|
-- the specific modems.
|
|
|
|
docsSubMgtPktFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsSubMgtPktFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of filter or classifier criteria. Classifiers are
|
|
assigned by group to the individual CMs. That assignment is made
|
|
via the configuration objects sent upstream from the CM to the
|
|
CMTS during registration."
|
|
::= { docsSubMgtObjects 6 }
|
|
|
|
docsSubMgtPktFilterEntry OBJECT-TYPE
|
|
SYNTAX DocsSubMgtPktFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the docsSubMgtPktFilterTable."
|
|
INDEX { docsSubMgtPktFilterGroup,
|
|
docsSubMgtPktFilterIndex }
|
|
::= {docsSubMgtPktFilterTable 1 }
|
|
|
|
DocsSubMgtPktFilterEntry ::= SEQUENCE
|
|
{
|
|
docsSubMgtPktFilterGroup Integer32,
|
|
docsSubMgtPktFilterIndex Integer32,
|
|
docsSubMgtPktFilterSrcAddr IpV4orV6Addr,
|
|
docsSubMgtPktFilterSrcMask IpV4orV6Addr,
|
|
|
|
|
|
docsSubMgtPktFilterDstAddr IpV4orV6Addr,
|
|
docsSubMgtPktFilterDstMask IpV4orV6Addr,
|
|
docsSubMgtPktFilterUlp Integer32,
|
|
docsSubMgtPktFilterTosValue OCTET STRING,
|
|
docsSubMgtPktFilterTosMask OCTET STRING,
|
|
docsSubMgtPktFilterAction INTEGER,
|
|
docsSubMgtPktFilterMatches Counter32,
|
|
docsSubMgtPktFilterStatus RowStatus
|
|
}
|
|
|
|
|
|
docsSubMgtPktFilterGroup OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies an ordered group of filters. Each modem may be
|
|
associated with a filter group for its upstream traffic
|
|
(docsSubMgtCmFilterUpstream) and a filter group for its
|
|
downstream traffic (docsSubMgtCmFilterDownstream). Typically,
|
|
many modems will use the same filter group."
|
|
::= { docsSubMgtPktFilterEntry 1 }
|
|
|
|
|
|
docsSubMgtPktFilterIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index which describes the ordering of a set of filter
|
|
specifications within the group. Filters are applied in index
|
|
order."
|
|
::= { docsSubMgtPktFilterEntry 2 }
|
|
|
|
docsSubMgtPktFilterSrcAddr OBJECT-TYPE
|
|
SYNTAX IpV4orV6Addr
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address to match in the packet to be
|
|
classified. By default, this is the all-zero's IP v4 and v6
|
|
address. A packet matches the SrcAddr filter if the following is
|
|
true:
|
|
AND (FilterSrcAddr, FilterSrcMask) ==
|
|
AND (Packet SrcAddr, FilterSrcMask).
|
|
The mask value is applied to both the match value in this table
|
|
and to the packet IP address."
|
|
DEFVAL { ''h }
|
|
::= { docsSubMgtPktFilterEntry 3 }
|
|
|
|
docsSubMgtPktFilterSrcMask OBJECT-TYPE
|
|
SYNTAX IpV4orV6Addr
|
|
MAX-ACCESS read-create
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask that is to be applied to the source address
|
|
prior to matching. This, taken with the SrcAddr specifies a
|
|
matching criteria. By default, the pair specifies a filter
|
|
which matches all source addresses. This mask is not
|
|
necessarily the same as a subnet mask, but for IPv4 addresses
|
|
the 1's bits must be leftmost and contiguous. IPv6 masks have
|
|
no such restriction."
|
|
DEFVAL { ''h }
|
|
::= { docsSubMgtPktFilterEntry 4 }
|
|
|
|
docsSubMgtPktFilterDstAddr OBJECT-TYPE
|
|
SYNTAX IpV4orV6Addr
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address to match in the packet to be
|
|
classified. By default, this is the all-zero's IP v4 and v6
|
|
address. A packet matches the DstAddr filter if the following is
|
|
true:
|
|
AND (FilterDstAddr, FilterDstMask) ==
|
|
AND (Packet DstAddr, FilterDstMask).
|
|
The mask value is applied to both the match value in this table
|
|
and to the packet IP address."
|
|
DEFVAL { ''h }
|
|
::= { docsSubMgtPktFilterEntry 5 }
|
|
|
|
docsSubMgtPktFilterDstMask OBJECT-TYPE
|
|
SYNTAX IpV4orV6Addr
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask that is to be applied to the destination
|
|
address prior to matching. This, taken with the DstAddr
|
|
specifies a matching criteria. By default, the pair specifies
|
|
a filter which matches all destination addresses. This mask is
|
|
not necessarily the same as a subnet mask, but for IPv4
|
|
addresses the 1's bits must be leftmost and contiguous. IPv6
|
|
masks have no such restriction."
|
|
DEFVAL { ''h }
|
|
::= { docsSubMgtPktFilterEntry 6 }
|
|
|
|
docsSubMgtPktFilterUlp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper level protocol to match. If this value is 256,
|
|
matches ALL ULP values. Otherwise, this matches the specific
|
|
protocol value. Note that if the packet ULP is either 6 (tcp) or
|
|
17 (udp), then docsSubMgtPktTcpUdpFilterTable must also be
|
|
consulted (if its entry exists) to see if this entry matches.
|
|
|
|
|
|
Obviously, if this value is neither tcp, udp nor 256, then that
|
|
table need not be matched against."
|
|
DEFVAL { 256 }
|
|
::= { docsSubMgtPktFilterEntry 7 }
|
|
|
|
docsSubMgtPktFilterTosValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TOS value to match in the IP packet."
|
|
DEFVAL { '0'h }
|
|
::= { docsSubMgtPktFilterEntry 8 }
|
|
|
|
docsSubMgtPktFilterTosMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask to apply against the TOS value to be matched in the
|
|
IP packet. The default for both these objects taken together
|
|
matches all TOS values. A packet matches this filter if the
|
|
following is true:
|
|
AND (FilterTosValue, FilterTosMask) ==
|
|
AND (Packet TOS Value, FilterTosMask)."
|
|
DEFVAL { '0'h }
|
|
::= { docsSubMgtPktFilterEntry 9 }
|
|
|
|
docsSubMgtPktFilterAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
accept(1),
|
|
drop(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The action to take upon this filter matching. Accept means
|
|
to accept the packet for further processing. Drop means to drop
|
|
the packet."
|
|
DEFVAL { accept }
|
|
::= { docsSubMgtPktFilterEntry 10 }
|
|
|
|
docsSubMgtPktFilterMatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number of times this specific rule
|
|
has been matched. This is incremented any time this rule is
|
|
encountered and all components match. It is only incremented for
|
|
the first (lowest-indexed) filter matching a packet."
|
|
::= { docsSubMgtPktFilterEntry 11 }
|
|
|
|
|
|
docsSubMgtPktFilterStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Standard rowStatus object for creating this row. Any object
|
|
in this row which is writable may be changed at any time while
|
|
the row is active."
|
|
::= { docsSubMgtPktFilterEntry 12 }
|
|
|
|
|
|
docsSubMgtTcpUdpFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsSubMgtTcpUdpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an adjunct to docsSubMgtPktFilterTable. It provides
|
|
optional filtering based on elements in TCP or UDP headers.
|
|
This table is separate from docsSubMgtPktFilterTable only
|
|
because it is expected to be used more rarely. This table
|
|
is not consulted unless the upper-layer protocol is TCP,
|
|
UDP, or 'any'."
|
|
::= { docsSubMgtObjects 7 }
|
|
|
|
docsSubMgtTcpUdpFilterEntry OBJECT-TYPE
|
|
SYNTAX DocsSubMgtTcpUdpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines filtering criteria for TCP and UDP headers."
|
|
INDEX { docsSubMgtPktFilterGroup, docsSubMgtPktFilterIndex }
|
|
::= {docsSubMgtTcpUdpFilterTable 1 }
|
|
|
|
DocsSubMgtTcpUdpFilterEntry ::= SEQUENCE
|
|
{
|
|
docsSubMgtTcpUdpSrcPort Integer32,
|
|
docsSubMgtTcpUdpDstPort Integer32,
|
|
docsSubMgtTcpFlagValues BITS,
|
|
docsSubMgtTcpFlagMask BITS,
|
|
docsSubMgtTcpUdpStatus RowStatus
|
|
}
|
|
|
|
docsSubMgtTcpUdpSrcPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port to match. 65536 matches any value in the
|
|
TCP or UDP source port field."
|
|
DEFVAL { 65536 }
|
|
::= { docsSubMgtTcpUdpFilterEntry 1 }
|
|
|
|
docsSubMgtTcpUdpDstPort OBJECT-TYPE
|
|
|
|
|
|
SYNTAX Integer32(0..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination port to match. 65536 matches any value in
|
|
the TCP or UDP destination port field."
|
|
DEFVAL { 65536 }
|
|
::= { docsSubMgtTcpUdpFilterEntry 2 }
|
|
|
|
|
|
docsSubMgtTcpFlagValues OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
urgent(0),
|
|
ack(1),
|
|
push(2),
|
|
reset(3),
|
|
syn(4),
|
|
fin(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the flags of interest. The value of this
|
|
object MUST always be a subset (proper or otherwise) of
|
|
docsSubMgtTcpFlagMask. An attempt to violate this constraint
|
|
returns an inconsistentValue error for an SNMPv2 or v3 agent
|
|
and a badValue error for an SNMPv1 agent."
|
|
DEFVAL { {} }
|
|
::= { docsSubMgtTcpUdpFilterEntry 3 }
|
|
|
|
|
|
docsSubMgtTcpFlagMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
urgent(0),
|
|
ack(1),
|
|
push(2),
|
|
reset(3),
|
|
syn(4),
|
|
fin(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This bit set indicates the flags of interest in the TCP
|
|
header for the packet to be matched. For example to match all
|
|
packets where the urgent bit is set, but that are not either syn
|
|
or fin, the value of docsSubMgtTcpFlagValues would be { urgent },
|
|
and the value of this object would be { urgent, syn, fin }"
|
|
DEFVAL { {} }
|
|
::= { docsSubMgtTcpUdpFilterEntry 4 }
|
|
|
|
|
|
|
|
docsSubMgtTcpUdpStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Standard row object for this table. Any object in the
|
|
conceptual row may be modified regardless of whether this row is
|
|
active or not."
|
|
::= { docsSubMgtTcpUdpFilterEntry 5 }
|
|
|
|
|
|
|
|
docsSubMgtCmFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsSubMgtCmFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Binds filter groups to modems. This table identifies for
|
|
each modem the upstream and downstream filter groups that apply
|
|
to packets for that modem. Zero is used as a distinguished value
|
|
to mean no filter group."
|
|
::= { docsSubMgtObjects 8 }
|
|
|
|
docsSubMgtCmFilterEntry OBJECT-TYPE
|
|
SYNTAX DocsSubMgtCmFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Binds a filter group to each direction of traffic for a
|
|
modem."
|
|
AUGMENTS { docsIfCmtsCmStatusEntry }
|
|
::= {docsSubMgtCmFilterTable 1 }
|
|
|
|
DocsSubMgtCmFilterEntry ::= SEQUENCE
|
|
{
|
|
docsSubMgtSubFilterDownstream Integer32,
|
|
docsSubMgtSubFilterUpstream Integer32,
|
|
docsSubMgtCmFilterDownstream Integer32,
|
|
docsSubMgtCmFilterUpstream Integer32
|
|
}
|
|
|
|
docsSubMgtSubFilterDownstream OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filter group applied to traffic destined for subscribers
|
|
attached to the referenced CM. This is set upon row creation to
|
|
either the default (docsSubMgtSubFilterDownDefault), or to the
|
|
value in the provisioning object sent upstream from the CM to the
|
|
CMTS during registration. The value of this object is a pointer
|
|
into the docsSubMgtPktFilterTable and refers to all filter rows
|
|
with matching docsSubMgtPktFilterGroup indices. If there are no
|
|
|
|
|
|
matching filter rows in that table, or if this object is set to
|
|
zero, no filtering is applied to traffic destined to hosts
|
|
attached to this CM."
|
|
::= { docsSubMgtCmFilterEntry 1 }
|
|
|
|
docsSubMgtSubFilterUpstream OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filter group applied to traffic originating from
|
|
subscribers attached to the referenced CM. This is set upon row
|
|
creation to either the default (docsSubMgtSubFilterUpDefault), or
|
|
to the value in the provisioning object sent upstream from the CM
|
|
to the CMTS. The value of this object is a pointer into the
|
|
docsSubMgtPktFilterTable and refers to all filter rows with
|
|
matching docsSubMgtPktFilterGroup indices. If there are no
|
|
matching filter rows in that table, or if this object is set to
|
|
zero, no filtering is applied to traffic originating from
|
|
hosts attached to this CM."
|
|
::= { docsSubMgtCmFilterEntry 2 }
|
|
|
|
|
|
docsSubMgtCmFilterDownstream OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filter group applied to traffic destined for the
|
|
referenced CM itself. This is set upon row creation to either
|
|
the default (docsSubMgtCmFilterDownDefault), or to the value in
|
|
the provisioning object sent upstream from the CM to the CMTS
|
|
during registration. The value of this object is a pointer into
|
|
the docsSubMgtPktFilterTable and refers to all filter rows with
|
|
matching docsSubMgtPktFilterGroup indices. If there are no
|
|
matching filter rows in that table, or if this object is set to
|
|
zero, no filtering is applied to traffic destined to this CM."
|
|
::= { docsSubMgtCmFilterEntry 3 }
|
|
|
|
docsSubMgtCmFilterUpstream OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filter group applied to traffic originating from the
|
|
referenced CM itself. This is set upon row creation to either
|
|
the default (docsSubMgtCmFilterUpDefault), or to the value in
|
|
the provisioning object sent upstream from the CM to the CMTS.
|
|
The value of this object is a pointer into the
|
|
docsSubMgtPktFilterTable and refers to all filter rows with
|
|
matching docsSubMgtPktFilterGroup indices. If there are no
|
|
matching filter rows in that table, or if this object is set
|
|
to zero, no filtering is applied to traffic originating from
|
|
|
|
|
|
this CM."
|
|
::= { docsSubMgtCmFilterEntry 4 }
|
|
|
|
docsSubMgtSubFilterDownDefault OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upon a row creation in docsSubMgtCmFilterTable,
|
|
docsSubMgtSubFilterDownstream is set to this value if no
|
|
provisioning object is present to override it. This object is
|
|
persistent across CMTS reboots. Upon initial CMTS
|
|
initialization, this defaults to 0."
|
|
::= { docsSubMgtObjects 9 }
|
|
|
|
docsSubMgtSubFilterUpDefault OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upon a row creation in docsSubMgtCmFilterTable,
|
|
docsSubMgtSubFilterUpstream is set to this value if no
|
|
provisioning object is present to override it. This object is
|
|
persistent across CMTS reboots. Upon initial CMTS
|
|
initialization, this defaults to 0."
|
|
::= { docsSubMgtObjects 10 }
|
|
|
|
docsSubMgtCmFilterDownDefault OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upon a row creation in docsSubMgtCmFilterTable,
|
|
docsSubMgtCmFilterDownstream is set to this value if no
|
|
provisioning object is present to override it. This object is
|
|
persistent across CMTS reboots. Upon initial CMTS
|
|
initialization, this defaults to 0."
|
|
::= { docsSubMgtObjects 11 }
|
|
|
|
docsSubMgtCmFilterUpDefault OBJECT-TYPE
|
|
SYNTAX Integer32(0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upon a row creation in docsSubMgtCmFilterTable,
|
|
docsSubMgtCmFilterUpstream is set to this value if no
|
|
provisioning object is present to override it. This object is
|
|
persistent across CMTS reboots. Upon initial CMTS
|
|
initialization, this defaults to 0."
|
|
::= { docsSubMgtObjects 12 }
|
|
|
|
|
|
|
|
|
|
|
|
docsSubMgtNotification OBJECT IDENTIFIER ::= { docsSubMgt 2 }
|
|
|
|
docsSubMgtConformance OBJECT IDENTIFIER ::= { docsSubMgt 3 }
|
|
docsSubMgtCompliances OBJECT IDENTIFIER ::=
|
|
{ docsSubMgtConformance 1 }
|
|
docsSubMgtGroups OBJECT IDENTIFIER ::=
|
|
{ docsSubMgtConformance 2 }
|
|
|
|
docsSubMgtBasicCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for CMTS devices that implement
|
|
CMTS centric subscriber management."
|
|
|
|
MODULE
|
|
|
|
MANDATORY-GROUPS {
|
|
docsSubMgtGroup
|
|
}
|
|
|
|
::= { docsSubMgtCompliances 1 }
|
|
|
|
|
|
docsSubMgtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
docsSubMgtCpeControlMaxCpeIp,
|
|
docsSubMgtCpeControlActive,
|
|
docsSubMgtCpeControlLearnable,
|
|
docsSubMgtCpeControlReset,
|
|
docsSubMgtCpeMaxIpDefault,
|
|
docsSubMgtCpeActiveDefault,
|
|
docsSubMgtCpeLearnableDefault,
|
|
docsSubMgtCpeIpAddr,
|
|
docsSubMgtCpeIpLearned,
|
|
docsSubMgtPktFilterSrcAddr,
|
|
docsSubMgtPktFilterSrcMask,
|
|
docsSubMgtPktFilterDstAddr,
|
|
docsSubMgtPktFilterDstMask,
|
|
docsSubMgtPktFilterUlp,
|
|
docsSubMgtPktFilterTosValue,
|
|
docsSubMgtPktFilterTosMask,
|
|
docsSubMgtPktFilterAction,
|
|
docsSubMgtPktFilterMatches,
|
|
docsSubMgtPktFilterStatus,
|
|
docsSubMgtTcpUdpSrcPort,
|
|
docsSubMgtTcpUdpDstPort,
|
|
docsSubMgtTcpFlagValues,
|
|
docsSubMgtTcpFlagMask,
|
|
docsSubMgtTcpUdpStatus,
|
|
docsSubMgtSubFilterDownstream,
|
|
docsSubMgtSubFilterUpstream,
|
|
docsSubMgtCmFilterDownstream,
|
|
docsSubMgtCmFilterUpstream,
|
|
|
|
|
|
docsSubMgtSubFilterDownDefault,
|
|
docsSubMgtSubFilterUpDefault,
|
|
docsSubMgtCmFilterDownDefault,
|
|
docsSubMgtCmFilterUpDefault
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects use to managed host-based cable modems
|
|
via a set of CMTS enforced controls."
|
|
::= { docsSubMgtGroups 1 }
|
|
END
|