4832 lines
145 KiB
Plaintext
4832 lines
145 KiB
Plaintext
--- ArubaOS 8.8.0.1_80393
|
|
WLSX-TRAP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TEXTUAL-CONVENTION,
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
snmpModules,
|
|
Integer32,
|
|
Counter32,
|
|
IpAddress,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
|
|
TDomain,
|
|
DisplayString,
|
|
PhysAddress,
|
|
TAddress,
|
|
TimeInterval,
|
|
RowStatus,
|
|
StorageType,
|
|
TestAndIncr,
|
|
MacAddress,
|
|
DateAndTime,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
wlsrEnterpriseMibModules
|
|
FROM ARUBA-MIB
|
|
ArubaFrameType,
|
|
ArubaAddressType,
|
|
ArubaEnableValue,
|
|
ArubaOperStateValue,
|
|
ArubaBlackListReason,
|
|
ArubaDBType,
|
|
ArubaVrrpState,
|
|
ArubaSwitchRole,
|
|
ArubaAuthenticationMethods,
|
|
ArubaConfigurationState,
|
|
ArubaConfigurationChangeType,
|
|
ArubaHTExtChannel,
|
|
ArubaAccessPointMode,
|
|
ArubaAccessPointMode,
|
|
ArubaARMChangeReason,
|
|
ArubaHTExtChannel,
|
|
ArubaConfigurationChangeType,
|
|
ArubaAPMasterStatus,
|
|
ArubaStationType,
|
|
ArubaThresholdResourceType,
|
|
ArubaStackState,
|
|
ArubaStackState,
|
|
ArubaStackChangeEvent,
|
|
ArubaStackIfTopoJoined,
|
|
InterfaceIndex,
|
|
ArubaIfState,
|
|
ArubaIfStateChangeReason,
|
|
ArubaAPUplinkType,
|
|
TimeTicks,
|
|
ArubaAPUplinkType,
|
|
ArubaAPUplinkChangeReason,
|
|
ArubaPortalServerDownReason
|
|
FROM ARUBA-TC;
|
|
|
|
wlsrTrapMIB MODULE-IDENTITY LAST-UPDATED "2106011926Z"
|
|
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
|
|
CONTACT-INFO
|
|
"Postal: 3333 Scott Blvd,
|
|
Santa Clara, CA 95054
|
|
E-mail: aruba-ext-eng-reg@hpe.com
|
|
Phone: +1 408 227 4500"
|
|
DESCRIPTION
|
|
"This MIB defines the Traps generated by the switch.
|
|
"
|
|
REVISION "2106011926Z"
|
|
DESCRIPTION
|
|
"The initial revision."
|
|
::= { wlsrEnterpriseMibModules 11 }
|
|
|
|
-- wlsrTrapsGroup
|
|
-- This group defines all the traps generated by the switch.
|
|
|
|
wlsxTrapsGroup OBJECT IDENTIFIER ::= { wlsrTrapMIB 1 }
|
|
|
|
--Trap Object Group contains objects used in the traps.
|
|
|
|
wlsxTrapObjectsGroup OBJECT IDENTIFIER ::= { wlsxTrapsGroup 1 }
|
|
|
|
--Trap Definitions Group contains Traps definitions.
|
|
|
|
wlsxTrapDefinitionsGroup OBJECT IDENTIFIER ::= { wlsxTrapsGroup 2 }
|
|
|
|
-- Definition of Objects used in the traps
|
|
|
|
wlsxTrapAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate
|
|
the wired MAC address of an access point, for which the trap is being raised.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 1 }
|
|
|
|
wlsxTrapAPIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate
|
|
the IP address of an access point, for which the trap is being raised.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 2 }
|
|
|
|
wlsxTrapAPBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the BSSID of the
|
|
access point, for which the trap is being raised.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 3 }
|
|
|
|
wlsxTrapEssid OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the SSID of the
|
|
access point, for which the trap is being raised.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 4 }
|
|
|
|
wlsxTrapTargetAPBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the BSSID of the
|
|
access point, for which we are raising the trap. If an
|
|
Air Monitor is sending the trap then this will indicate
|
|
AP. If an access point is sending the trap, then it will point
|
|
to itself.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 5 }
|
|
|
|
wlsxTrapTargetAPSSID OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the SSID of the
|
|
access point, for which the trap is being raised. If an
|
|
Air Monitor is sending the trap then this will indicate
|
|
AP. If an access point is sending the trap, then it will point
|
|
to itself.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 6 }
|
|
|
|
wlsxTrapTargetAPChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the channel of the
|
|
access point, for which the trap is being raised. If an
|
|
air monitor is sending the trap then this will indicate
|
|
AP. If an access point is sending the trap, then it will point
|
|
to itself.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 7 }
|
|
|
|
wlsxTrapNodeMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the MAC address of
|
|
a node.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 8 }
|
|
|
|
wlsxTrapSourceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the MAC address of
|
|
the source.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 9 }
|
|
|
|
wlsxReceiverMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the MAC address of
|
|
the receiver.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 10 }
|
|
|
|
wlsxTrapTransmitterMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the MAC address of
|
|
the transmitter.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 11 }
|
|
|
|
wlsxTrapReceiverMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the MAC address of
|
|
the receiver.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 12 }
|
|
|
|
wlsxTrapSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Signal to Noise
|
|
ratio.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 13 }
|
|
|
|
wlsxTrapSignatureName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Signature Name.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 14 }
|
|
|
|
wlsxTrapFrameType OBJECT-TYPE
|
|
SYNTAX ArubaFrameType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Frame Type
|
|
"
|
|
::= {wlsxTrapObjectsGroup 15 }
|
|
|
|
wlsxTrapAddressType OBJECT-TYPE
|
|
SYNTAX ArubaAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Address type.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 16 }
|
|
|
|
wlsxTrapAPLocation OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Location of the AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 17 }
|
|
|
|
wlsxTrapAPChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Current Channel.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 18 }
|
|
|
|
wlsxTrapAPTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the AP Transmit Power.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 19 }
|
|
|
|
wlsxTrapMatchedMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the MAC address
|
|
"
|
|
::= {wlsxTrapObjectsGroup 20 }
|
|
|
|
wlsxTrapMatchedIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the IP address
|
|
"
|
|
::= {wlsxTrapObjectsGroup 21 }
|
|
|
|
wlsxTrapRogueIfoURL OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used to point to the WEBUI Rogue AP information URL.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 22 }
|
|
|
|
wlsxTrapVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the VLAN Id.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 23 }
|
|
|
|
wlsxTrapAdminStatus OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the admin status of
|
|
VLAN.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 24 }
|
|
|
|
wlsxTrapOperStatus OBJECT-TYPE
|
|
SYNTAX ArubaOperStateValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the admin status of
|
|
VLAN.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 25 }
|
|
|
|
wlsxTrapAuthServerName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Authentication Server used for Authentication.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 26 }
|
|
|
|
wlsxTrapAuthServerTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Authentication Server Timeout.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 27 }
|
|
|
|
wlsxTrapCardSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Slot in which this card is present.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 28 }
|
|
|
|
wlsxTrapTemperatureValue OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Temperature Value.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 29 }
|
|
|
|
wlsxTrapProcessName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Process name.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 30 }
|
|
|
|
wlsxTrapFanNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Fan Number.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 31 }
|
|
|
|
wlsxTrapVoltageType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
type of Voltage.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 32 }
|
|
|
|
wlsxTrapVoltageValue OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
voltage value in Float.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 33 }
|
|
|
|
wlsxTrapStationBlackListReason OBJECT-TYPE
|
|
SYNTAX ArubaBlackListReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Reason for which a station is black listed.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 34 }
|
|
|
|
wlsxTrapSpoofedIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify a spoofed IP address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 35 }
|
|
|
|
wlsxTrapSpoofedOldPhyAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify an old MAC address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 36 }
|
|
|
|
wlsxTrapSpoofedNewPhyAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify a New MAC address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 37 }
|
|
|
|
wlsxTrapDBName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify name of the database.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 38 }
|
|
|
|
wlsxTrapDBUserName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify name of the database user.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 39 }
|
|
|
|
wlsxTrapDBIpAddress OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify the IpAddress of the
|
|
Database.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 40 }
|
|
|
|
wlsxTrapDBType OBJECT-TYPE
|
|
SYNTAX ArubaDBType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in a trap to identify the port of the user.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 41 }
|
|
|
|
wlsxTrapVrrpID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object contains the Virtual Router Identifier.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 42 }
|
|
|
|
wlsxTrapVrrpMasterIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object contains the Master IP address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 43 }
|
|
|
|
wlsxTrapVrrpOperState OBJECT-TYPE
|
|
SYNTAX ArubaVrrpState
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the VRRP Operational state.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 44 }
|
|
|
|
wlsxTrapESIServerGrpName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the External Services Interface (ESI) Server
|
|
Group name
|
|
"
|
|
::= {wlsxTrapObjectsGroup 45 }
|
|
|
|
wlsxTrapESIServerName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the External Services Interface (ESI) Server
|
|
Name
|
|
"
|
|
::= {wlsxTrapObjectsGroup 46 }
|
|
|
|
wlsxTrapESIServerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the External Services Interface (ESI) Server
|
|
IP address
|
|
"
|
|
::= {wlsxTrapObjectsGroup 47 }
|
|
|
|
wlsxTrapLicenseDaysRemaining OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents number of the days remaining prior to a
|
|
license expiry.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 48 }
|
|
|
|
wlsxTrapSwitchIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the controller IP address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 49 }
|
|
|
|
wlsxTrapSwitchRole OBJECT-TYPE
|
|
SYNTAX ArubaSwitchRole
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Role of the controller.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 50 }
|
|
|
|
wlsxTrapUserIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents IP address of the User.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 51 }
|
|
|
|
wlsxTrapUserPhyAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents MAC address of the User.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 52 }
|
|
|
|
wlsxTrapUserName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the user name.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 53 }
|
|
|
|
wlsxTrapUserRole OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Authentication method of the user.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 54 }
|
|
|
|
wlsxTrapUserAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX ArubaAuthenticationMethods
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Authentication method of the user.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 55 }
|
|
|
|
wlsxTrapAPRadioNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the radio number.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 56 }
|
|
|
|
wlsxTrapRogueInfoURL OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used to point to the WEBGUI Rogue AP information
|
|
URL.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 57 }
|
|
|
|
wlsxTrapInterferingAPInfoURL OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used to point to the WEBGUI Rogue interfering
|
|
AP information URL.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 58 }
|
|
|
|
wlsxTrapPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
port number.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 59 }
|
|
|
|
wlsxTrapTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in all the enterprise traps to indicate the
|
|
the time when the trap is generated on the controller.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 60 }
|
|
|
|
wlsxTrapHostIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Trap host.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 61 }
|
|
|
|
wlsxTrapHostPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Trap host port.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 62 }
|
|
|
|
wlsxTrapConfigurationId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the ID of the configuration, to be used in traps.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 63 }
|
|
|
|
wlsxTrapCTSURL OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the URL from which the transfer should happen.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 64 }
|
|
|
|
wlsxTrapCTSTransferType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the transfer type, upload or download.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 65 }
|
|
|
|
wlsxTrapConfigurationState OBJECT-TYPE
|
|
SYNTAX ArubaConfigurationState
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents state of the configuration transfer.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 66 }
|
|
|
|
wlsxTrapUpdateFailureReason OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the reason for the update failure.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 67 }
|
|
|
|
wlsxTrapUpdateFailedObj OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This variable represents the AMAPI object which is the reason for the the update failure.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 68 }
|
|
|
|
wlsxTrapTableEntryChangeType OBJECT-TYPE
|
|
SYNTAX ArubaConfigurationChangeType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents type of the configuration change.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 69 }
|
|
|
|
wlsxTrapGlobalConfigObj OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This variable represents the AMAPI object corresponding to the global configuration change.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 70 }
|
|
|
|
wlsxTrapTableGenNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents generation number of a table. Used in the MMS, to keep track of the table content changes.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 71 }
|
|
|
|
wlsxTrapLicenseId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the license ID.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 72 }
|
|
|
|
wlsxTrapConfidenceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Confidence Level as a percentage
|
|
"
|
|
::= {wlsxTrapObjectsGroup 73 }
|
|
|
|
wlsxTrapMissingLicenses OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This variable indicates any licenses that are not present during a configuration update
|
|
"
|
|
::= {wlsxTrapObjectsGroup 74 }
|
|
|
|
wlsxVoiceCurrentNumCdr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the number of CDRs in buffer.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 75 }
|
|
|
|
wlsxTrapTunnelId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the tunnel ID.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 76 }
|
|
|
|
wlsxTrapTunnelStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the tunnel Status.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 77 }
|
|
|
|
wlsxTrapTunnelUpReason OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the tunnel up reason.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 78 }
|
|
|
|
wlsxTrapTunnelDownReason OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the tunnel down reason.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 79 }
|
|
|
|
wlsxTrapApSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the AP Serial Number.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 80 }
|
|
|
|
wlsxTrapTimeStr OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Time in String format.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 81 }
|
|
|
|
wlsxTrapMasterIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the master IP address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 82 }
|
|
|
|
wlsxTrapLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Local IP address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 83 }
|
|
|
|
wlsxTrapMasterName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the master controller name.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 84 }
|
|
|
|
wlsxTrapLocalName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the local controller name.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 85 }
|
|
|
|
wlsxTrapPrimaryControllerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the IP address of the AP's primary controller.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 86 }
|
|
|
|
wlsxTrapBackupControllerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the IP address of the AP's backup controller.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 87 }
|
|
|
|
wlsxTrapSpoofedFrameType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Spoofed Frame Type
|
|
"
|
|
::= {wlsxTrapObjectsGroup 88 }
|
|
|
|
wlsxTrapAssociationType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the type of association
|
|
"
|
|
::= {wlsxTrapObjectsGroup 89 }
|
|
|
|
wlsxTrapDeviceIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the IP address of a device seen by an AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 90 }
|
|
|
|
wlsxTrapDeviceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the MAC address of a device seen by an AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 91 }
|
|
|
|
wlsxTrapVcIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Ip Address of a Voice client.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 92 }
|
|
|
|
wlsxTrapVcMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the MAC address of a Voice client.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 93 }
|
|
|
|
wlsxTrapAPName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Name of the AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 94 }
|
|
|
|
wlsxTrapApMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the AP Mode.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 95 }
|
|
|
|
wlsxTrapAPPrevChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Previous Channel.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 96 }
|
|
|
|
wlsxTrapAPPrevChannelSec OBJECT-TYPE
|
|
SYNTAX ArubaHTExtChannel
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Previous Secondary Channel.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 97 }
|
|
|
|
wlsxTrapAPPrevTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate previous AP Transmit Power.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 98 }
|
|
|
|
wlsxTrapAPCurMode OBJECT-TYPE
|
|
SYNTAX ArubaAccessPointMode
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the APs Current Mode.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 99 }
|
|
|
|
wlsxTrapAPPrevMode OBJECT-TYPE
|
|
SYNTAX ArubaAccessPointMode
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the APs Previous Mode.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 100 }
|
|
|
|
wlsxTrapAPARMChangeReason OBJECT-TYPE
|
|
SYNTAX ArubaARMChangeReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object represents the APs Previous Mode.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 101 }
|
|
|
|
wlsxTrapAPChannelSec OBJECT-TYPE
|
|
SYNTAX ArubaHTExtChannel
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Current Secondary Channel.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 102 }
|
|
|
|
wlsxTrapUserAttributeChangeType OBJECT-TYPE
|
|
SYNTAX ArubaConfigurationChangeType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents type of the configuration change.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 103 }
|
|
|
|
wlsxTrapApControllerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
IP address of the controller to which the AP is
|
|
(or was most recently) registered.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 104 }
|
|
|
|
wlsxTrapApMasterStatus OBJECT-TYPE
|
|
SYNTAX ArubaAPMasterStatus
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Status of the AP as seen by the master when the status changes.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 105 }
|
|
|
|
wlsxTrapCaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the name of the trustpoint.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 106 }
|
|
|
|
wlsxTrapCrlName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the name of the crl.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 107 }
|
|
|
|
wlsxTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the number of occurrence of this trap.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 108 }
|
|
|
|
wlsxTrapPowerSupplyNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the power supply number.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 109 }
|
|
|
|
wlsxTrapFanTrayNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Fan Tray number.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 110 }
|
|
|
|
wlsxTrapClientClassification OBJECT-TYPE
|
|
SYNTAX ArubaStationType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the classification of the client.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 111 }
|
|
|
|
wlsxThresholdResourceType OBJECT-TYPE
|
|
SYNTAX ArubaThresholdResourceType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Threshold alert's Resource Type .
|
|
"
|
|
::= {wlsxTrapObjectsGroup 112 }
|
|
|
|
wlsxThresholdResourceName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Threshold alert's Resource Name .
|
|
"
|
|
::= {wlsxTrapObjectsGroup 113 }
|
|
|
|
wlsxThresholdValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Threshold alert's set threshold value.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 114 }
|
|
|
|
wlsxResourceValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Threshold alert's actual value.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 115 }
|
|
|
|
wlsxStackPrevSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the slot number of this stack element prior
|
|
to topology change in stack. A value of -1 indicates that this slot
|
|
was not in Active state of stack prior to topology change.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 116 }
|
|
|
|
wlsxStackCurrentSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the slot number of this stack element after
|
|
the topology change in stack. A value of -1 indicates that this slot
|
|
is not in Active state of stack after the topology change.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 117 }
|
|
|
|
wlsxStackPrevState OBJECT-TYPE
|
|
SYNTAX ArubaStackState
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the state of this stack element prior to
|
|
topology change in stack.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 118 }
|
|
|
|
wlsxStackCurrentState OBJECT-TYPE
|
|
SYNTAX ArubaStackState
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the state of this stack element
|
|
after topology change in stack.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 119 }
|
|
|
|
wlsxStackChangeEvent OBJECT-TYPE
|
|
SYNTAX ArubaStackChangeEvent
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the event which caused change in topology in
|
|
stack.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 120 }
|
|
|
|
wlsxStackProtoIfTopoJoined OBJECT-TYPE
|
|
SYNTAX ArubaStackIfTopoJoined
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies whether an interface has joined the stacking
|
|
topology or left the topology.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 121 }
|
|
|
|
wlsxStackMemberMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies mac-address of this stack element.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 122 }
|
|
|
|
wlsxStackMemberSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the slot number of this element in stack.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 123 }
|
|
|
|
wlsxStackIfName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the interface name which is part of stacking
|
|
link connected to other stacking element.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 124 }
|
|
|
|
wlsxTrapLicenseServerDaysRemaining OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents number of the days remaining prior to expiry
|
|
of license limits sent by the server.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 125 }
|
|
|
|
wlsxTrapLicenseClientDaysRemaining OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents number of the days remaining prior to expiry
|
|
of licenses contributed by a license client.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 126 }
|
|
|
|
wlsxIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the ifIndex.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 127 }
|
|
|
|
wlsxIfState OBJECT-TYPE
|
|
SYNTAX ArubaIfState
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the state of an interface.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 128 }
|
|
|
|
wlsxIfStateChangeReason OBJECT-TYPE
|
|
SYNTAX ArubaIfStateChangeReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the reason for interface state change.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 129 }
|
|
|
|
wlsxTrapAPPreviousUplinkType OBJECT-TYPE
|
|
SYNTAX ArubaAPUplinkType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the up link type for an AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 130 }
|
|
|
|
wlsxTrapAPPreviousUplinkActiveTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the up link type for an AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 131 }
|
|
|
|
wlsxTrapAPActiveUplinkType OBJECT-TYPE
|
|
SYNTAX ArubaAPUplinkType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the up link type for an AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 132 }
|
|
|
|
wlsxTrapAPUplinkChangeReason OBJECT-TYPE
|
|
SYNTAX ArubaAPUplinkChangeReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the up link change reason.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 133 }
|
|
|
|
wlsxTrapExpiringCertName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the name of the certificate that is expiring in less than 60 days.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 134 }
|
|
|
|
wlsxTrapExpiredCertName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the name of the certificate that has expired.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 135 }
|
|
|
|
wlsxTrapHTMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents HT Mode.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 136 }
|
|
|
|
wlsxTrapPhyType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents Physical Type.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 137 }
|
|
|
|
wlsxTrapAPManagedModeConfigFailure OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object indicates the error for the failure of config apply on IAP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 138 }
|
|
|
|
wlsxTrapAuthServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Authentication Server IP used for Authentication.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 139 }
|
|
|
|
wlsxTrapPortalServerName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Captive Portal Server used for Authentication.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 140 }
|
|
|
|
wlsxTrapPortalServerAddress OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the
|
|
Captive Portal Server IP or host name used for Authentication.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 141 }
|
|
|
|
wlsxTrapPortalServerDownReason OBJECT-TYPE
|
|
SYNTAX ArubaPortalServerDownReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object specifies the captive portal server down reason.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 142 }
|
|
|
|
wlsxTrapLicensePlatformMismatchKey OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents license incompatibility with the given
|
|
platform.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 143 }
|
|
|
|
wlsxTrapTargetAPName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the target's AP name.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 144 }
|
|
|
|
wlsxTrapTargetAPMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the target's MAC address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 145 }
|
|
|
|
wlsxTrapAPUSBStatus OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents plug in or plug out status of an USB device.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 146 }
|
|
|
|
wlsxTrapUSBVendorProductID OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents vendor ID or product ID of an USB device.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 147 }
|
|
|
|
wlsxTrapSwitchIpv6 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the controller IPv6 address.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 148 }
|
|
|
|
wlsxTrapStationBlackListReasonStr OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Reason for which a station is black listed in details.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 149 }
|
|
|
|
wlsxTrapPeerIpAddress OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the peer IP address of Cluster VLAN probe.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 150 }
|
|
|
|
wlsxTrapConnectionStatus OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the Connection status of Cluster VLAN probe.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 151 }
|
|
|
|
wlsxTrapFailedVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the failed VLAN id of cluster VLAN probe.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 152 }
|
|
|
|
wlsxTrapMatchedIpv6 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object is used in the traps to indicate the IPv6 address
|
|
"
|
|
::= {wlsxTrapObjectsGroup 153 }
|
|
|
|
wlsxTrapDeviceIpv6Address OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the IPv6 address of a device seen by an AP.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 154 }
|
|
|
|
wlsxTrapAuthFailureReason OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the reason for the authentication failure.
|
|
"
|
|
::= {wlsxTrapObjectsGroup 155 }
|
|
|
|
-- Definition of traps
|
|
|
|
wlsxVlanLinkUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVlanId,wlsxTrapAdminStatus,
|
|
wlsxTrapOperStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a VLAN interface is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1000 }
|
|
|
|
wlsxVlanLinkDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVlanId,wlsxTrapAdminStatus,
|
|
wlsxTrapOperStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a VLAN interface is down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1001 }
|
|
|
|
wlsxSignatureMatch NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPBSSID,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a signature match was detected.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1002 }
|
|
|
|
wlsxNodeRateAnomaly NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
|
|
wlsxTrapSnr,wlsxTrapAPBSSID,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a node is exceeding the threshold set for
|
|
the frame type.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1003 }
|
|
|
|
wlsxNormalTemperature NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTemperatureValue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the Temperature has returned to
|
|
an acceptable range.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1004 }
|
|
|
|
wlsxProcessRestart NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the named process has been restarted.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1005 }
|
|
|
|
wlsxFlashSpaceOK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap which indicates that the system flash space is back
|
|
to a sufficient level.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1006 }
|
|
|
|
wlsxMemoryUsageOK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap which indicates that the free memory usage is back
|
|
to a sufficient level.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1007 }
|
|
|
|
wlsxPowerSupplyOK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the system power supply condition have
|
|
returned to normal operation status.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1008 }
|
|
|
|
wlsxFanOK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the fan has returned to normal.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1009 }
|
|
|
|
wlsxInRangeVoltage NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVoltageType,wlsxTrapVoltageValue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the controller Voltage is back within range.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1010 }
|
|
|
|
wlsxCoverageHoleResolved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
|
|
wlsxTrapAPIpAddress,wlsxTrapNodeMac}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a coverage hole at location
|
|
wlsxTrapAPLocation has been resolved.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1011 }
|
|
|
|
wlsxNSwitchIPChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSwitchIp}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the controller IP address has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1012 }
|
|
|
|
wlsxNSwitchRoleChange NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSwitchRole}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the role of the controller IP address has
|
|
changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1013 }
|
|
|
|
wlsxNUserEntryCreated NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a new user was created.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1014 }
|
|
|
|
wlsxNUserEntryDeleted NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a user was deleted.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1015 }
|
|
|
|
wlsxNUserEntryAuthenticated NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
|
|
wlsxTrapUserName,wlsxTrapUserAuthenticationMethod,
|
|
wlsxTrapUserRole}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a user is Authenticated.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1016 }
|
|
|
|
wlsxNUserEntryDeAuthenticated NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a user is Deauthenticated.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1017 }
|
|
|
|
wlsxNUserAuthenticationFailed NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
|
|
wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
|
|
wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
|
|
wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a user authentication has failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1018 }
|
|
|
|
wlsxNAuthServerReqTimedOut NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
|
|
wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
|
|
wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
|
|
wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the authentication server request timed out.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1019 }
|
|
|
|
wlsxNAuthServerTimedOut NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerAddress,
|
|
wlsxTrapAuthServerTimeout,wlsxTrapUserName,
|
|
wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
|
|
wlsxTrapAPBSSID,wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the authentication server timed out.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1020 }
|
|
|
|
wlsxNAuthServerIsUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an authentication server is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1021 }
|
|
|
|
wlsxNAuthMaxUserEntries NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the user entries table is full and
|
|
cannot add any more entries.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1022 }
|
|
|
|
wlsxNAuthMaxAclEntries NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the ACL Entries table is full and
|
|
cannot add any more entries.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1023 }
|
|
|
|
wlsxNAuthMaxBWContracts NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the controller reached the maximum number
|
|
of configurable Bandwidth contracts.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1024 }
|
|
|
|
wlsxNPowerSupplyFailure NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the power supply has failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1025 }
|
|
|
|
wlsxNFanFailure NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the fan has failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1026 }
|
|
|
|
wlsxNOutOfRangeVoltage NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVoltageType,wlsxTrapVoltageValue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the controller voltage is out of range.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1027 }
|
|
|
|
wlsxNOutOfRangeTemperature NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTemperatureValue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the controller internal temperature is
|
|
out of range.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1028 }
|
|
|
|
wlsxNLCInserted NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a line card is inserted.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1029 }
|
|
|
|
wlsxNSCInserted NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
a Trap which indicates that a supervisor card is inserted.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1030 }
|
|
|
|
wlsxNGBICInserted NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a GBIC is inserted in a Line Card.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1031 }
|
|
|
|
wlsxNProcessDied NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a process has died.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1032 }
|
|
|
|
wlsxNProcessExceedsMemoryLimits NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a process is consuming Large
|
|
amounts of memory.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1033 }
|
|
|
|
wlsxNLowOnFlashSpace NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the controller is running low on flash space.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1034 }
|
|
|
|
wlsxNLowMemory NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the system free memory is low.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1035 }
|
|
|
|
wlsxNFanTrayRemoved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a fan tray is removed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1036 }
|
|
|
|
wlsxNFanTrayInserted NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a fan tray is inserted.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1037 }
|
|
|
|
wlsxNLCRemoved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a Line card is removed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1038 }
|
|
|
|
wlsxNPowerSupplyMissing NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the power supply is missing.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1039 }
|
|
|
|
wlsxNAccessPointIsUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that an access point up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1040 }
|
|
|
|
wlsxNAccessPointIsDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that an access point down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1041 }
|
|
|
|
wlsxNCoverageHoleDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
|
|
wlsxTrapAPIpAddress,wlsxTrapNodeMac}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an access point at Location
|
|
wlsxTrapAPLocation has detected a Coverage Hole.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1042 }
|
|
|
|
wlsxNChannelChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an access point at Location
|
|
wlsxTrapAPLocation has changed the channel.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1043 }
|
|
|
|
wlsxNStationAddedToBlackList NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapStationBlackListReason,
|
|
wlsxTrapStationBlackListReasonStr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the station is black listed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1044 }
|
|
|
|
wlsxNStationRemovedFromBlackList NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the station is removed from the black list.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1045 }
|
|
|
|
wlsxNIpSpoofingDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSpoofedIpAddress,wlsxTrapSpoofedOldPhyAddress,
|
|
wlsxTrapSpoofedNewPhyAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap indicating that the controller detected IP Spoofing.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1046 }
|
|
|
|
wlsxNDBCommunicationFailure NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapDBName,wlsxTrapDBUserName,
|
|
wlsxTrapDBIpAddress,wlsxTrapDBType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that communication with Database failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1047 }
|
|
|
|
wlsxNVrrpStateChange NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVrrpID,wlsxTrapVrrpMasterIp,
|
|
wlsxTrapVrrpOperState}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that VRRP state has changed on the controller.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1048 }
|
|
|
|
wlsxNRadioAttributesChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPIpAddress,wlsxTrapAPChannel,
|
|
wlsxTrapAPTxPower}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates changes in the Radio attributes of an
|
|
access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1049 }
|
|
|
|
wlsxNESIServerUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName,wlsxTrapESIServerName,
|
|
wlsxTrapESIServerIpAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a ESI server is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1050 }
|
|
|
|
wlsxNESIServerDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName,wlsxTrapESIServerName,
|
|
wlsxTrapESIServerIpAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a ESI server is down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1051 }
|
|
|
|
wlsxNLicenseExpiry NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapLicenseDaysRemaining}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1052 }
|
|
|
|
wlsxUnsecureAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel,
|
|
wlsxTrapMatchedMac,wlsxTrapMatchedIp,
|
|
wlsxTrapRogueInfoURL,wlsxTrapMatchedIpv6}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address. "
|
|
::= {wlsxTrapDefinitionsGroup 1053 }
|
|
|
|
wlsxUnsecureAPResolved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected access point, classified as Rogue,
|
|
is no longer present in the network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1054 }
|
|
|
|
wlsxStaImpersonation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected Station Impersonation.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1055 }
|
|
|
|
wlsxReservedChannelViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected an access point
|
|
which is violating the Reserved Channel configuration.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1056 }
|
|
|
|
wlsxValidSSIDViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected an access point is violating
|
|
Valid SSID configuration by using an SSID that is reserved for use by a valid AP only.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1057 }
|
|
|
|
wlsxChannelMisconfiguration NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point that has a channel misconfiguration
|
|
because it is using a channel that is not valid.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1058 }
|
|
|
|
wlsxOUIMisconfiguration NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point that has an OUI misconfiguration because
|
|
it is using an OUI that is not valid.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1059 }
|
|
|
|
wlsxSSIDMisconfiguration NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using
|
|
an SSID that is not valid.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1060 }
|
|
|
|
wlsxShortPreableMisconfiguration NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an access point has bad Short preamble
|
|
configuration.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1061 }
|
|
|
|
wlsxWPAMisconfiguration NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1062 }
|
|
|
|
wlsxAdhocNetworkDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM has detected an Ad hoc
|
|
network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1063 }
|
|
|
|
wlsxAdhocNetworkRemoved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected Ad hoc Network is no
|
|
longer present in the network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1064 }
|
|
|
|
wlsxStaPolicyViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1065 }
|
|
|
|
wlsxRepeatWEPIVViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1066 }
|
|
|
|
wlsxWeakWEPIVViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1067 }
|
|
|
|
wlsxChannelInterferenceDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected channel interference.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1068 }
|
|
|
|
wlsxChannelInterferenceCleared NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected channel interference
|
|
is no longer present.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1069 }
|
|
|
|
wlsxAPInterferenceDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected interference for an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1070 }
|
|
|
|
wlsxAPInterferenceCleared NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the previously detected interference for an access point
|
|
is no longer present.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1071 }
|
|
|
|
wlsxStaInterferenceDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapNodeMac,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected interference for a station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1072 }
|
|
|
|
wlsxStaInterferenceCleared NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapNodeMac,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the previously detected interference for a station
|
|
is no longer present.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1073 }
|
|
|
|
wlsxFrameRetryRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1074 }
|
|
|
|
wlsxFrameReceiveErrorRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1075 }
|
|
|
|
wlsxFrameFragmentationRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1076 }
|
|
|
|
wlsxFrameBandWidthRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1077 }
|
|
|
|
wlsxFrameLowSpeedRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1078 }
|
|
|
|
wlsxFrameNonUnicastRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1079 }
|
|
|
|
wlsxLoadbalancingEnabled NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM is reporting that an AP
|
|
has enabled Load balancing.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1080 }
|
|
|
|
wlsxLoadbalancingDisabled NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM is reporting that an AP
|
|
has enabled Load balancing.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1081 }
|
|
|
|
wlsxChannelFrameRetryRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1082 }
|
|
|
|
wlsxChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1083 }
|
|
|
|
wlsxChannelFrameErrorRateExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1084 }
|
|
|
|
wlsxSignatureMatchAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match in a frame from an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1085 }
|
|
|
|
wlsxSignatureMatchSta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match in a frame from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1086 }
|
|
|
|
wlsxChannelRateAnomaly NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected frames on a channel which
|
|
exceed the configured IDS rate threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1087 }
|
|
|
|
wlsxNodeRateAnomalyAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected frames transmitted or received by an
|
|
access point, which exceed the configured IDS rate threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1088 }
|
|
|
|
wlsxNodeRateAnomalySta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected frames transmitted or received by a
|
|
node, which exceed the configured IDS rate threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1089 }
|
|
|
|
wlsxEAPRateAnomaly NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the rate of EAP Handshake packets
|
|
received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1090 }
|
|
|
|
wlsxSignalAnomaly NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected a Signal Anomaly.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1091 }
|
|
|
|
wlsxSequenceNumberAnomalyAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM received packets from an AP
|
|
which exceeds the acceptable sequence number difference.
|
|
The acceptable sequence number difference is an IDS configuration
|
|
object.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1092 }
|
|
|
|
wlsxSequenceNumberAnomalySta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM received packets from a Node
|
|
which exceeds the acceptable sequence number difference.
|
|
The acceptable sequence number difference is an IDS configuration
|
|
object.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1093 }
|
|
|
|
wlsxDisconnectStationAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected a station Disconnect
|
|
attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1094 }
|
|
|
|
wlsxApFloodAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the number of potential fake APs detected by
|
|
an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1095 }
|
|
|
|
wlsxAdhocNetwork NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected an Ad hoc
|
|
Network. An Station is connected to an ad hoc AP.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1096 }
|
|
|
|
wlsxWirelessBridge NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTransmitterMac,wlsxTrapReceiverMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1097 }
|
|
|
|
wlsxInvalidMacOUIAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1098 }
|
|
|
|
wlsxInvalidMacOUISta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapNodeMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1099 }
|
|
|
|
wlsxWEPMisconfiguration NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1100 }
|
|
|
|
wlsxStaRepeatWEPIVViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1101 }
|
|
|
|
wlsxStaWeakWEPIVViolation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1102 }
|
|
|
|
wlsxStaAssociatedToUnsecureAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapNodeMac,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel,wlsxTrapRogueInfoURL}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected a client associated
|
|
with a Rogue access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1103 }
|
|
|
|
wlsxStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapNodeMac}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected rogue access point
|
|
association is no longer present.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1104 }
|
|
|
|
wlsxAdhocNetworkBridgeDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM has detected an Ad hoc
|
|
network that is bridging to a wired network
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1105 }
|
|
|
|
wlsxInterferingApDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel,
|
|
wlsxTrapInterferingAPInfoURL}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point classified as Interfering. The access point
|
|
is declared Interfering because it is neither authorized or classified as Rogue.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1106 }
|
|
|
|
wlsxPortUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCardSlot,wlsxTrapPortNumber,
|
|
wlsxTrapAdminStatus,wlsxTrapOperStatus}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a Physical port is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1107 }
|
|
|
|
wlsxPortDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCardSlot,wlsxTrapPortNumber,
|
|
wlsxTrapAdminStatus,wlsxTrapOperStatus}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a Physical port is Down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1108 }
|
|
|
|
wlsxBSSIDIsUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPBSSID,wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that an access point BSSID is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1109 }
|
|
|
|
wlsxBSSIDIsDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPBSSID,wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that an access point BSSID is down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1110 }
|
|
|
|
wlsxColdStart NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An enterprise version of cold start trap, which contains the controller time stamp.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1111 }
|
|
|
|
wlsxWarmStart NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An enterprise version of warm start trap, which contains the controller time stamp.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1112 }
|
|
|
|
wlsxAPImpersonation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold.
|
|
The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1113 }
|
|
|
|
wlsxInformQueueOverFlow NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapHostIp,wlsxTrapHostPort}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an Inform queue overflow condition occurred.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1114 }
|
|
|
|
wlsxNAuthServerIsDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an authentication server is down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1115 }
|
|
|
|
wlsxCTSTransferError NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCTSTransferType,wlsxTrapCTSURL}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the status of the configuration transfer from the management station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1116 }
|
|
|
|
wlsxCTSTransferSucceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCTSTransferType,wlsxTrapCTSURL}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the status of the configuration transfer from the management station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1117 }
|
|
|
|
wlsxConfigurationUpdateError NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapUpdateFailureReason,
|
|
wlsxTrapUpdateFailedObj}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the configuration update status.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1118 }
|
|
|
|
wlsxConfigurationUpdateSucceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the configuration update status.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1119 }
|
|
|
|
wlsxGlobalConfigurationChangeNotification NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapGlobalConfigObj}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that global configuration was modified on the controller.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1120 }
|
|
|
|
wlsxUserEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapUserIpAddress,
|
|
wlsxTrapUserPhyAddress,wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the user configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1121 }
|
|
|
|
wlsxAPBssidEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPBSSID,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the BSSID configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1122 }
|
|
|
|
wlsxAPRadioEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the Radio configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1123 }
|
|
|
|
wlsxAPEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the AP configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1124 }
|
|
|
|
wlsxSwitchListEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapSwitchIp,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the controller list has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1125 }
|
|
|
|
wlsxPortEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapCardSlot,
|
|
wlsxTrapPortNumber,wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the port configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1126 }
|
|
|
|
wlsxVlanEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapVlanId,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the VLAN configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1127 }
|
|
|
|
wlsxVlanInterfaceEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapVlanId,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the VLAN Interface configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1128 }
|
|
|
|
wlsxWindowsBridgeDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM has detected a station
|
|
that is bridging from a wireless network
|
|
to a wired network
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1129 }
|
|
|
|
wlsxLicenseEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapLicenseId,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the license table has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1130 }
|
|
|
|
wlsxEsiServerChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapESIServerName,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the ESI server table has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1131 }
|
|
|
|
wlsxMonAPEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a monitored AP entry changed
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1132 }
|
|
|
|
wlsxMonStationEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapNodeMac,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a monitored station entry changed
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1133 }
|
|
|
|
wlsxSignAPNetstumbler NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Netstumbler from an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1134 }
|
|
|
|
wlsxSignStaNetstumbler NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Netstumbler from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1135 }
|
|
|
|
wlsxSignAPAsleap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for ASLEAP from an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1136 }
|
|
|
|
wlsxSignStaAsleap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for ASLEAP from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1137 }
|
|
|
|
wlsxSignAPAirjack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for AirJack from an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1138 }
|
|
|
|
wlsxSignStaAirjack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for AirJack from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1139 }
|
|
|
|
wlsxSignAPNullProbeResp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Null-Probe-Response from an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1140 }
|
|
|
|
wlsxSignStaNullProbeResp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1141 }
|
|
|
|
wlsxSignAPDeauthBcast NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1142 }
|
|
|
|
wlsxSignStaDeauthBcast NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1143 }
|
|
|
|
wlsxWindowsBridgeDetectedAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP is detecting an access point that is bridging from a wireless network
|
|
to a wired network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1144 }
|
|
|
|
wlsxWindowsBridgeDetectedSta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP is detecting a station that is bridging from a wireless network
|
|
to a wired network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1145 }
|
|
|
|
wlsxAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM has detected an Ad hoc
|
|
network that is bridging to a wired network
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1146 }
|
|
|
|
wlsxAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM has detected an Ad hoc
|
|
network that is bridging to a wired network
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1147 }
|
|
|
|
wlsxDisconnectStationAttackAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected a station disconnect
|
|
attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1148 }
|
|
|
|
wlsxDisconnectStationAttackSta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AM detected a station Disconnect
|
|
attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1149 }
|
|
|
|
wlsxSuspectUnsecureAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPRadioNumber,wlsxTrapMatchedMac,
|
|
wlsxTrapMatchedIp,wlsxTrapConfidenceLevel,
|
|
wlsxTrapAPLocation,wlsxTrapRogueInfoURL,
|
|
wlsxTrapMatchedIpv6}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap indicates that an access point, classified as Suspected Rogue, has been
|
|
detected by a Controller. The AP is suspected to be rogue,
|
|
with the supplied confidence level, because it was matched to
|
|
the wired MAC address.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1150 }
|
|
|
|
wlsxSuspectUnsecureAPResolved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPRadioNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected access point, classified Suspected
|
|
Rogue, is either no longer present in the network or
|
|
has changed its state.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1151 }
|
|
|
|
wlsxConfigurationLicenseMismatch NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapMissingLicenses}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the configuration update status in the case
|
|
where some configuration could not be applied due to missing licenses.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1152 }
|
|
|
|
wlsxVoiceCdrBufferThresholdReached NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxVoiceCurrentNumCdr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the CDR buffer threshold has been reached
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1153 }
|
|
|
|
wlsxTunnelUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTunnelId,wlsxTrapTunnelUpReason,
|
|
wlsxTrapTunnelStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a tunnel interface is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1154 }
|
|
|
|
wlsxTunnelDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTunnelId,wlsxTrapTunnelDownReason,
|
|
wlsxTrapTunnelStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a tunnel interface is down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1155 }
|
|
|
|
wlsxMeshNodeEntryChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
|
|
wlsxTrapTableEntryChangeType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the mesh node configuration has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1156 }
|
|
|
|
wlsxHtGreenfieldSupported NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an access point that supports HT Greenfield mode.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1157 }
|
|
|
|
wlsxHT40MHzIntoleranceAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1158 }
|
|
|
|
wlsxHT40MHzIntoleranceSta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
|
|
wlsxTrapAPChannel,wlsxTrapFrameType,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1159 }
|
|
|
|
wlsxNAuthServerAllInService NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that all authentication servers is a server group are brought back in service.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1160 }
|
|
|
|
wlsxNAdhocNetwork NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an ad hoc
|
|
network where a station is connected to an ad hoc access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1161 }
|
|
|
|
wlsxNAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an ad hoc
|
|
network that is bridging to a wired network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1162 }
|
|
|
|
wlsxNAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapTargetAPSSID,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an ad hoc
|
|
network that is bridging to a wired network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1163 }
|
|
|
|
wlsxNAuthMaxXsecUserEntries NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the xSec user limit is reached.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1164 }
|
|
|
|
wlsxNVpnMaxSessions NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the VPN session limit is reached.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1165 }
|
|
|
|
wlsxNRapExpiredPSK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPIpAddress,wlsxTrapApSerialNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the RAP is using the Expired PSK.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1166 }
|
|
|
|
wlsxNRapWarnExpiredPSK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTimeStr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the Cached IKE PSK for RAPs will expire soon.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1167 }
|
|
|
|
wlsxNConnectionResetWithLocal NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapMasterName,wlsxTrapMasterIp,
|
|
wlsxTrapLocalName,wlsxTrapLocalIp,
|
|
wlsxTrapTimeStr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that tcp connection between master controller and local controller has been lost.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1168 }
|
|
|
|
wlsxNApOnBackupController NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapBackupControllerIp,
|
|
wlsxTrapPrimaryControllerIp}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the AP has registered with the backup controller.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1169 }
|
|
|
|
wlsxClientFloodAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the number of potential fake clients detected by
|
|
an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1170 }
|
|
|
|
wlsxValidClientNotUsingEncryption NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapNodeMac,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1171 }
|
|
|
|
wlsxAdhocUsingValidSSID NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an ad hoc network using a valid/protected SSID.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1172 }
|
|
|
|
wlsxAPSpoofingDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSpoofedFrameType,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1173 }
|
|
|
|
wlsxClientAssociatingOnWrongChannel NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSpoofedFrameType,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel. This can be a sign that the BSSID is
|
|
being spoofed in order to fool the client into thinking the AP is operating on another channel.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1174 }
|
|
|
|
wlsxNDisconnectStationAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapSourceMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets
|
|
received by that client exceeds the configured threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1175 }
|
|
|
|
wlsxNStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapNodeMac,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1176 }
|
|
|
|
wlsxOmertaAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an Omerta attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1177 }
|
|
|
|
wlsxTKIPReplayAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a possible TKIP replay attack. If successful this could be the precursor to more
|
|
advanced attacks.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1178 }
|
|
|
|
wlsxChopChopAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a ChopChop attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1179 }
|
|
|
|
wlsxFataJackAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a FATA-Jack attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1180 }
|
|
|
|
wlsxInvalidAddressCombination NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapAPChannel,
|
|
wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an invalid source and destination combination.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1181 }
|
|
|
|
wlsxValidClientMisassociation NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapAssociationType,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1182 }
|
|
|
|
wlsxMalformedHTIEDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1183 }
|
|
|
|
wlsxMalformedAssocReqDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a malformed association request with a NULL SSID.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1184 }
|
|
|
|
wlsxOverflowIEDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1185 }
|
|
|
|
wlsxOverflowEAPOLKeyDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1186 }
|
|
|
|
wlsxMalformedFrameLargeDurationDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1187 }
|
|
|
|
wlsxMalformedFrameWrongChannelDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapTargetAPChannel,wlsxTrapAPChannel,
|
|
wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1188 }
|
|
|
|
wlsxMalformedAuthFrame NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an authentication frame with
|
|
either a bad algorithm (similar to Fata-Jack) or a bad transaction.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1189 }
|
|
|
|
wlsxCTSRateAnomaly NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the rate of CTS packets
|
|
received by an AP exceeds the configured IDS threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1190 }
|
|
|
|
wlsxRTSRateAnomaly NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the rate of RTS packets
|
|
received by an AP exceeds the configured IDS threshold.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1191 }
|
|
|
|
wlsxNRogueAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an unauthorized access point is connected to the wired network. The access point is
|
|
classified as Rogue by the system.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1192 }
|
|
|
|
wlsxNRogueAPResolved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected access point, classified as Rogue,
|
|
is either no longer present in the network or it changed its state.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1193 }
|
|
|
|
wlsxNeighborAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an access point has been classified as a Neighbor by the system.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1194 }
|
|
|
|
wlsxNInterferingAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an access point has been classified as Interfering by the system. The access point
|
|
is declared Interfering because it is not authorized, nor has it been classified as a Rogue.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1195 }
|
|
|
|
wlsxNSuspectRogueAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPChannel,wlsxTrapConfidenceLevel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an access point, classified as Suspected Rogue, is
|
|
detected by the system. The AP is suspected to be rogue
|
|
with the supplied confidence level.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1196 }
|
|
|
|
wlsxNSuspectRogueAPResolved NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a previously detected access point, classified as Suspected
|
|
Rogue, is either no longer present in the network or
|
|
has changed its state.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1197 }
|
|
|
|
wlsxBlockAckAttackDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapSourceMac,
|
|
wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an attempt has been made to deny service to
|
|
the source address by spoofing a block ACK add request that sets a
|
|
sequence number window outside the currently used window.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1198 }
|
|
|
|
wlsxHotspotterAttackDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapNodeMac,
|
|
wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapSnr,
|
|
wlsxTrapTargetAPSSID}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a new AP has appeared immediately following a client probe request.
|
|
This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake
|
|
hotspot or other wireless network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1199 }
|
|
|
|
wlsxNSignatureMatch NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1200 }
|
|
|
|
wlsxNSignatureMatchNetstumbler NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Netstumbler in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1201 }
|
|
|
|
wlsxNSignatureMatchAsleap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for ASLEAP in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1202 }
|
|
|
|
wlsxNSignatureMatchAirjack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Airjack in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1203 }
|
|
|
|
wlsxNSignatureMatchNullProbeResp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1204 }
|
|
|
|
wlsxNSignatureMatchDeauthBcast NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1205 }
|
|
|
|
wlsxNSignatureMatchDisassocBcast NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1206 }
|
|
|
|
wlsxNSignatureMatchWellenreiter NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
|
|
wlsxTrapReceiverMac,wlsxTrapSignatureName,
|
|
wlsxTrapSnr,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a signature match for Wellenreiter in a frame.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1207 }
|
|
|
|
wlsxAPDeauthContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
|
|
wlsxTrapAPChannel,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain an access point by disconnecting its client.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1208 }
|
|
|
|
wlsxClientDeauthContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1209 }
|
|
|
|
wlsxAPWiredContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
|
|
wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapDeviceIpv6Address}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1210 }
|
|
|
|
wlsxClientWiredContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapDeviceIpv6Address}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1211 }
|
|
|
|
wlsxAPTaggedWiredContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
|
|
wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
|
|
wlsxTrapVlanId,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapDeviceIpv6Address}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1212 }
|
|
|
|
wlsxClientTaggedWiredContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
|
|
wlsxTrapVlanId,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapDeviceIpv6Address}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1213 }
|
|
|
|
wlsxTarpitContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
|
|
wlsxTrapAPChannel,wlsxTrapTargetAPChannel,
|
|
wlsxTrapSourceMac,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1214 }
|
|
|
|
wlsxVoiceClientLocationUpdate NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVcIpAddress,wlsxTrapVcMacAddress,
|
|
wlsxTrapSwitchIp,wlsxTrapAPName,
|
|
wlsxTrapAPMacAddress,wlsxTrapApMode,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the location of voice client has been changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1215 }
|
|
|
|
wlsxAPChannelChange NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPChannel,wlsxTrapAPChannelSec,
|
|
wlsxTrapAPPrevChannel,wlsxTrapAPPrevChannelSec,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPARMChangeReason}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP changed its channel.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1216 }
|
|
|
|
wlsxAPPowerChange NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPTxPower,wlsxTrapAPPrevTxPower,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP changed its transmit power level.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1217 }
|
|
|
|
wlsxAPModeChange NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPCurMode,wlsxTrapAPPrevMode,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1218 }
|
|
|
|
wlsxUserEntryAttributesChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
|
|
wlsxTrapAPBSSID,wlsxTrapAPName,
|
|
wlsxTrapCardSlot,wlsxTrapPortNumber,
|
|
wlsxTrapUserAttributeChangeType,wlsxTrapHTMode,
|
|
wlsxTrapPhyType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the user entry attributes have changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1219 }
|
|
|
|
wlsxPowerSaveDosAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a Power Save DoS attack.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1220 }
|
|
|
|
wlsxNAPMasterStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapApControllerIp,
|
|
wlsxTrapApMasterStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the status of the AP as seen by
|
|
the master controller has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1221 }
|
|
|
|
wlsxNAdhocUsingValidSSID NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapSourceMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1222 }
|
|
|
|
wlsxCRLExpired NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCaName,wlsxTrapCrlName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the CRL associated with the particular Trustpoint is expired.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1223 }
|
|
|
|
wlsxMgmtUserAuthenticationFailed NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
|
|
wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
|
|
wlsxTrapAuthServerAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a management user authentication has failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1224 }
|
|
|
|
wlsxNConnectionBackfromLocal NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapMasterName,wlsxTrapMasterIp,
|
|
wlsxTrapLocalName,wlsxTrapLocalIp,
|
|
wlsxTrapTimeStr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that tcp connection between master controller and local controller is back.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1225 }
|
|
|
|
wlsxAPNumUpgradeFailure NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
|
|
wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of upgrade failure of an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1226 }
|
|
|
|
wlsxAPNumWarmStarts NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
|
|
wlsxTrapAPIpAddress,wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of warm starts of an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1227 }
|
|
|
|
wlsxAPNumColdStarts NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
|
|
wlsxTrapAPIpAddress,wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of cold starts of an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1228 }
|
|
|
|
wlsxAPNumDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
|
|
wlsxTrapAPIpAddress,wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of down alarms of an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1229 }
|
|
|
|
wlsxAPNumRadioDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
|
|
wlsxTrapAPIpAddress,wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of radio down alarms of an access point.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1230 }
|
|
|
|
wlsxNumClockSyncErrors NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the total number of clock sync errors between the
|
|
switch and access points.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1231 }
|
|
|
|
wlsxNumColdStart NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of cold-starts of the switch.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1232 }
|
|
|
|
wlsxNumWarmStart NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates the number of warm-starts of the switch.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1233 }
|
|
|
|
wlsxWirelessHostedNetworkDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapClientClassification,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a wireless client that is
|
|
hosting a softAP. The softAP could be used to share the hosting
|
|
client's wired or wireless network connection with other wireless users.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1234 }
|
|
|
|
wlsxClientAssociatedToHostedNetwork NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected that a wireless client associated
|
|
to an access point that is hosted by another wireless client.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1235 }
|
|
|
|
wlsxThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxThresholdResourceType,wlsxThresholdResourceName,
|
|
wlsxThresholdValue,wlsxResourceValue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap indicates a particular resource under monitoring has gone above the threshold specified.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1236 }
|
|
|
|
wlsxThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxThresholdResourceType,wlsxThresholdResourceName,
|
|
wlsxThresholdValue,wlsxResourceValue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap indicates a particular resource under monitoring has come below the threshold specified.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1237 }
|
|
|
|
wlsxWirelessHostedNetworkContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that containment is being enforced on a client associated to a hosted network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1238 }
|
|
|
|
wlsxHostOfWirelessNetworkContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPBSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that containment is being enforced on a client that is hosting a wireless hosted network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1239 }
|
|
|
|
wlsxEnhancedAdhocContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
|
|
wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP has attempted to contain an adhoc node by disconnecting it from other members of the adhoc network.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1240 }
|
|
|
|
wlsxPowerSupplyOKTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapPowerSupplyNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the system power supply condition have
|
|
returned to normal operation status.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1241 }
|
|
|
|
wlsxPowerSupplyFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapPowerSupplyNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the power supply has failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1242 }
|
|
|
|
wlsxFanTrayRemovedTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFanTrayNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a fan tray is removed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1243 }
|
|
|
|
wlsxFanTrayInsertedTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFanTrayNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that a fan tray is inserted.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1244 }
|
|
|
|
wlsxPowerSupplyMissingTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapPowerSupplyNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the power supply is missing.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1245 }
|
|
|
|
wlsxStackTopologyChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxStackMemberMacAddress,wlsxStackPrevSlot,
|
|
wlsxStackCurrentSlot,wlsxStackPrevState,
|
|
wlsxStackCurrentState,wlsxStackChangeEvent}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When change happens in any topology of the stack element in the
|
|
stack, then a notification is sent to the Management Entity.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1246 }
|
|
|
|
wlsxStackIfStateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxStackMemberMacAddress,wlsxStackMemberSlotNumber,
|
|
wlsxStackIfName,wlsxStackProtoIfTopoJoined}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When any stacking interface in any stack element joins or leaves
|
|
stacking topology, then a notification is sent to the Management
|
|
Entity with slot and interface information.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1247 }
|
|
|
|
wlsxLicenseServerExpiry NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapLicenseServerDaysRemaining}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that licenses sent from the license
|
|
server will expire in wlsxTrapLicenseServerDaysRemaining days.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1248 }
|
|
|
|
wlsxLicenseClientExpiry NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapLicenseClientDaysRemaining}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that licenses contributed by a license
|
|
client will expire in wlsxTrapLicenseClientDaysRemaining days.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1249 }
|
|
|
|
wlsxIfStateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxIfIndex,wlsxIfState,
|
|
wlsxIfStateChangeReason}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When the link state of an interface changes due to reason
|
|
specified by wlsxIfStateChangeReason object, a notification is
|
|
sent to the Management Entity with reason for this state change
|
|
and interface information.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1250 }
|
|
|
|
wlsxWMSOffloadRecommended NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that current state in the WMS module shows that WMS is reaching capacity, and
|
|
so it is recommended to enable WMS-Offload.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1251 }
|
|
|
|
wlsxAPActiveUplinkChanged NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPPreviousUplinkType,
|
|
wlsxTrapAPPreviousUplinkActiveTime,wlsxTrapAPActiveUplinkType,
|
|
wlsxTrapAPUplinkChangeReason}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When the active uplink of an AP changes, a notification is
|
|
sent to the Management Entity with the new uplink type
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1252 }
|
|
|
|
wlsxCertExpiringSoon NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapExpiringCertName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a particular Certificate is going to expire in less than 60 days.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1253 }
|
|
|
|
wlsxCertExpired NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapExpiredCertName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that a particular Certificate has expired and is no longer valid.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1254 }
|
|
|
|
wlsxAPManagedModeConfigFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPManagedModeConfigFailure}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that config apply has failed on the IAP.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1255 }
|
|
|
|
wlsxNAuthServerAcctTimedOut NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
|
|
wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
|
|
wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
|
|
wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the authentication server accounting timed out.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1256 }
|
|
|
|
wlsxAPUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapAPIpAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that AP is Up with AP name and IP address.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1257 }
|
|
|
|
wlsxAPDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapAPIpAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that AP is Down with AP name and IP address.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1258 }
|
|
|
|
wlsxPortalServerDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapPortalServerName,wlsxTrapPortalServerAddress,
|
|
wlsxTrapAPName,wlsxTrapPortalServerDownReason}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the captive portal server is down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1259 }
|
|
|
|
wlsxPortalServerUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapPortalServerName,wlsxTrapPortalServerAddress,
|
|
wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the captive portal server is up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1260 }
|
|
|
|
wlsxNAdhocUsingValidSSIDContainment NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
|
|
wlsxTrapNodeMac,wlsxTrapSnr,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapAPChannel}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that containment is being enforced on an ad hoc wireless network node using a valid/protected SSID.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1261 }
|
|
|
|
wlsxLicensePlatformMismatch NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapLicensePlatformMismatchKey}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that license to be installed is not compatible with the platform.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1262 }
|
|
|
|
wlsxIAPVoiceClientLocationUpdate NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapVcIpAddress,wlsxTrapVcMacAddress,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The trap represents a IAP voice client location update.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1263 }
|
|
|
|
wlsxNAceUsageThreshold NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the ACE Entries table has reached
|
|
eighty percent of the maximum limit.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1264 }
|
|
|
|
wlsxNWebCCLicenseEnforcement NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that web-cc license enforcement has been triggered.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1265 }
|
|
|
|
wlsxNFanAbsent NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A trap which indicates that the fan is absent.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1266 }
|
|
|
|
wlsxWPAFTAttack NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
|
|
wlsxTrapAPLocation,wlsxTrapNodeMac,
|
|
wlsxTrapAPChannel,wlsxTrapTargetAPBSSID}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates there is a possible attack of the Fast BSS Transition causing a WPA key re-installation.
|
|
This can be indicative of a security breach where an attacker can hijack a client's association and/or
|
|
decrypt an otherwise secure connection.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1267 }
|
|
|
|
wlsxMitMDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPLocation,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapSourceMac,
|
|
wlsxTrapTargetAPBSSID,wlsxTrapAPChannel,
|
|
wlsxTrapSnr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a possible channel-based Man in the Middle attack by someone using spoofed beacons with an invalid Channel Switch Announcement.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1268 }
|
|
|
|
wlsxAPPortUp NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapPortNumber,wlsxTrapOperStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that AP's secure jack port is Up.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1269 }
|
|
|
|
wlsxAPPortDown NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapPortNumber,wlsxTrapOperStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that AP's secure jack port is Down.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1270 }
|
|
|
|
wlsxAPLoopDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapPortNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that loop is detected on AP's secure jack port.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1271 }
|
|
|
|
wlsxAPBROADCASTSTORM NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapPortNumber}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that broadcast storm is detected on AP's secure jack port.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1272 }
|
|
|
|
wlsxAPIPConflict NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapAPIpAddress,wlsxTrapSourceMac,
|
|
wlsxTrapCount}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an IP conflict is detected on AP.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1273 }
|
|
|
|
wlsxCLEARPASSSERVERINVALID NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that CLEARPASS server is not valid when using the CA to verity the server for download-role.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1274 }
|
|
|
|
wlsxNLowOnFlash1Space NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the controller is running low on flash1 space.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1275 }
|
|
|
|
wlsxFlash1SpaceOK NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap which indicates that the system flash1 space is back
|
|
to a sufficient level.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1276 }
|
|
|
|
wlsxTHERMALSHUTDOWN NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapAPIpAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP is overheat and in shutdown mode.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1277 }
|
|
|
|
wlsxPhonyBSSIDDetected NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPLocation,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPRadioNumber,wlsxTrapTargetAPBSSID,
|
|
wlsxTrapAPChannel,wlsxTrapTargetAPName,
|
|
wlsxTrapTargetAPMac}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an AP detected a non-configured BSSID that should belong to one of our known valid APs.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1278 }
|
|
|
|
wlsxAPUSBPLUGALARM NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapUSBVendorProductID,wlsxTrapUSBVendorProductID,
|
|
wlsxTrapAPUSBStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that an USB device is plugged in or out to an AP.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1279 }
|
|
|
|
wlsxNSwitchIPv6Changed NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapSwitchIpv6}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates that the controller IPv6 address has changed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1280 }
|
|
|
|
wlsxNDot1xThresholdLimitHit NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the controller is running on high optimum limit.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1281 }
|
|
|
|
wlsxNDot1xTotalLimitHit NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Trap which indicates that the controller is running on full optimum limit.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1282 }
|
|
|
|
wlsxClusterVlanProbeStatus NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapPeerIpAddress,wlsxTrapConnectionStatus,
|
|
wlsxTrapFailedVlan}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the cluster VLAN probe status.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1283 }
|
|
|
|
wlsxClientRejectedByMaxClientCount NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserPhyAddress,wlsxTrapAPBSSID,
|
|
wlsxTrapAPMacAddress,wlsxTrapAPName,
|
|
wlsxTrapEssid}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the client is rejected by the max client count.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1284 }
|
|
|
|
wlsxClientPskAuthenticationFailed NOTIFICATION-TYPE
|
|
OBJECTS {wlsxTrapTime, wlsxTrapUserPhyAddress,wlsxTrapAuthFailureReason,
|
|
wlsxTrapAPBSSID,wlsxTrapAPMacAddress,
|
|
wlsxTrapAPName,wlsxTrapEssid}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This trap indicates the client PSK Authentication Failed.
|
|
"
|
|
::= {wlsxTrapDefinitionsGroup 1285 }
|
|
|
|
END
|