6232 lines
184 KiB
Plaintext
6232 lines
184 KiB
Plaintext
--- ArubaOS 8.8.0.1_80393
|
|
-- vim:set ts=4 sw=4:
|
|
WLSX-WLAN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
snmpModules,
|
|
Integer32,
|
|
Unsigned32,
|
|
Counter32,
|
|
IpAddress,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
|
|
TDomain,
|
|
DisplayString,
|
|
PhysAddress,
|
|
TAddress,
|
|
TimeInterval,
|
|
RowStatus,
|
|
StorageType,
|
|
TestAndIncr,
|
|
MacAddress,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
|
|
ArubaEnableValue,
|
|
ArubaFrameType,
|
|
ArubaActiveState,
|
|
ArubaRogueApType,
|
|
ArubaAuthenticationMethods,
|
|
ArubaEncryptionMethods,
|
|
ArubaPhyType,
|
|
ArubaVoipProtocolType,
|
|
ArubaVlanValidRange,
|
|
ArubaAccessPointMode,
|
|
ArubaAPStatus,
|
|
ArubaEnet1Mode,
|
|
ArubaUnprovisionedStatus,
|
|
ArubaMonitorMode,
|
|
ArubaAntennaSetting,
|
|
ArubaMeshRole,
|
|
ArubaHTMode,
|
|
ArubaPortSpeed,
|
|
ArubaHTExtChannel
|
|
FROM ARUBA-TC
|
|
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
wlsxEnterpriseMibModules
|
|
FROM ARUBA-MIB;
|
|
|
|
wlsxWlanMIB MODULE-IDENTITY
|
|
LAST-UPDATED "202008141745Z"
|
|
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
|
|
CONTACT-INFO
|
|
"Postal: 3333 Scott Blvd,
|
|
Santa Clara, CA 95054
|
|
E-mail: aruba-ext-eng-reg@hpe.com
|
|
Phone: 408 227 4500
|
|
Fax: 408 752 0626"
|
|
DESCRIPTION
|
|
"This MIB module defines MIB objects which provide
|
|
information about the Wireless Management System (WMS) in the
|
|
Aruba Controller."
|
|
REVISION "202008141745Z"
|
|
DESCRIPTION
|
|
"The initial revision."
|
|
::= { wlsxEnterpriseMibModules 5 }
|
|
|
|
wlsxWlanConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 1 }
|
|
wlsxWlanStateGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 2 }
|
|
wlsxWlanStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 3 }
|
|
wlsxRAPTraps OBJECT IDENTIFIER ::= { wlsxWlanMIB 100 }
|
|
|
|
-- wlsxWlanAccessPointInfoGroup contains a Local Access Point Information Table.
|
|
-- which lists all the APs connected to the controller, a Global AP Info Table
|
|
-- which lists all the APs in the Aruba Domain. The Global table is valid only
|
|
-- on the Master controller. The Group also contains two scalar objects which
|
|
-- indicate the total number of APs and the total number of Clients connected.
|
|
|
|
wlsxWlanAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 1 }
|
|
wlsxWlanStationInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 2 }
|
|
wlsxWlanAssociationInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 3 }
|
|
wlsxWlanAccessPointStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 1 }
|
|
wlsxWlanStationStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 2 }
|
|
wlsxWlanSwitchStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 3 }
|
|
wlsxSSIDConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanConfigGroup 1 }
|
|
wlsxAPConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanConfigGroup 2 }
|
|
|
|
wlsxWlanTotalNumAccessPoints OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Total Number of Access Points connected to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 1 }
|
|
|
|
wlsxWlanTotalNumStationsAssociated OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Total Number of Stations Associated to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 2 }
|
|
|
|
-- AP Group Table
|
|
wlsxWlanAPGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists all the Access Points Groups configured in the
|
|
Aruba controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 3 }
|
|
|
|
wlsxWlanAPGroupEntry OBJECT-TYPE
|
|
SYNTAX WlanAPGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Group Entry"
|
|
INDEX {wlanAPGroup}
|
|
::= { wlsxWlanAPGroupTable 1 }
|
|
|
|
WlanAPGroupEntry ::=
|
|
SEQUENCE {
|
|
wlanAPGroup DisplayString,
|
|
wlanAPNumAps Integer32
|
|
}
|
|
|
|
wlanAPGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The name of an AP group
|
|
"
|
|
::= { wlsxWlanAPGroupEntry 1 }
|
|
|
|
wlanAPNumAps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of APs in the AP Group
|
|
"
|
|
::= { wlsxWlanAPGroupEntry 2 }
|
|
|
|
|
|
-- AP Table
|
|
|
|
wlsxWlanAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table lists all the Access Points connected to the
|
|
controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 4 }
|
|
|
|
wlsxWlanAPEntry OBJECT-TYPE
|
|
SYNTAX WlanAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Point Entry"
|
|
INDEX {wlanAPMacAddress}
|
|
::= { wlsxWlanAPTable 1 }
|
|
|
|
WlanAPEntry ::=
|
|
SEQUENCE {
|
|
wlanAPMacAddress MacAddress,
|
|
wlanAPIpAddress IpAddress,
|
|
wlanAPName DisplayString,
|
|
wlanAPGroupName DisplayString,
|
|
wlanAPModel OBJECT IDENTIFIER,
|
|
wlanAPSerialNumber DisplayString,
|
|
wlanAPdot11aAntennaGain Integer32,
|
|
wlanAPdot11gAntennaGain Integer32,
|
|
wlanAPNumRadios Integer32,
|
|
wlanAPEnet1Mode ArubaEnet1Mode,
|
|
wlanAPIpsecMode ArubaEnableValue,
|
|
wlanAPUpTime TimeTicks,
|
|
wlanAPModelName DisplayString,
|
|
wlanAPLocation DisplayString,
|
|
wlanAPBuilding Integer32,
|
|
wlanAPFloor Integer32,
|
|
wlanAPLoc Integer32,
|
|
wlanAPExternalAntenna ArubaAntennaSetting,
|
|
wlanAPStatus ArubaAPStatus,
|
|
wlanAPNumBootstraps Integer32,
|
|
wlanAPNumReboots Integer32,
|
|
wlanAPUnprovisioned ArubaUnprovisionedStatus,
|
|
wlanAPMonitorMode ArubaMonitorMode,
|
|
wlanAPFQLNBuilding DisplayString,
|
|
wlanAPFQLNFloor DisplayString,
|
|
wlanAPFQLN DisplayString,
|
|
wlanAPFQLNCampus DisplayString,
|
|
wlanAPLongitude DisplayString,
|
|
wlanAPLatitude DisplayString,
|
|
wlanAPAltitude DisplayString,
|
|
wlanAPMeshRole ArubaMeshRole,
|
|
wlanAPSysLocation DisplayString,
|
|
wlanAPHwVersion DisplayString,
|
|
wlanAPSwVersion DisplayString,
|
|
wlanAPNumWarmReboots Integer32,
|
|
wlanAPOuterIpAddress IpAddress,
|
|
wlanAPRemoteLanIpAddress IpAddress,
|
|
wlanAPActiveUplink INTEGER,
|
|
wlanAPSwitchIpAddress IpAddress,
|
|
wlanAPStandbyIpAddress IpAddress,
|
|
wlanAPConnectedAsStandby INTEGER,
|
|
wlanAPServiceTag DisplayString,
|
|
wlanAPConnectedAsDatazone INTEGER,
|
|
wlanAPIpv6Address DisplayString(SIZE(0..45)),
|
|
wlanAPFlexRadioMode ArubaFlexRadioMode,
|
|
wlanAPdot11aAntennaGain10x Integer32,
|
|
wlanAPdot11gAntennaGain10x Integer32,
|
|
wlanAPDual5GMode ArubaEnableValue,
|
|
wlanAPActiveIpAddress DisplayString(SIZE(0..45)),
|
|
wlanAPSplit5GMode ArubaSplit5GMode
|
|
}
|
|
|
|
wlanAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Ethernet MAC Address of the Access Point
|
|
"
|
|
::= { wlsxWlanAPEntry 1 }
|
|
|
|
wlanAPIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
IP Address of the Access Point
|
|
"
|
|
::= { wlsxWlanAPEntry 2 }
|
|
|
|
wlanAPName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Host name of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 3 }
|
|
|
|
wlanAPGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Group Name of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 4 }
|
|
|
|
wlanAPModel OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Sys OID of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 5 }
|
|
|
|
wlanAPSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Serial Number of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 6 }
|
|
|
|
wlanAPdot11aAntennaGain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Configured antenna gain for 'A' Radio.
|
|
"
|
|
::= { wlsxWlanAPEntry 7 }
|
|
|
|
wlanAPdot11gAntennaGain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Configured antenna gain for 'G' Radio.
|
|
"
|
|
::= { wlsxWlanAPEntry 8 }
|
|
|
|
wlanAPNumRadios OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Number of Radios in the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 9 }
|
|
|
|
wlanAPEnet1Mode OBJECT-TYPE
|
|
SYNTAX ArubaEnet1Mode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enet1 Mode of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 10 }
|
|
|
|
wlanAPIpsecMode OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
IPSEC Mode of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 11 }
|
|
|
|
wlanAPUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Time (in hundredths of seconds) since the last time the Access
|
|
Point bootstrapped with the controller.
|
|
"
|
|
::= { wlsxWlanAPEntry 12 }
|
|
|
|
wlanAPModelName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Model name of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 13 }
|
|
|
|
wlanAPLocation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Location of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 14 }
|
|
|
|
wlanAPBuilding OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Building Number.
|
|
"
|
|
::= { wlsxWlanAPEntry 15 }
|
|
|
|
wlanAPFloor OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Floor Number.
|
|
"
|
|
::= { wlsxWlanAPEntry 16 }
|
|
|
|
wlanAPLoc OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Location.
|
|
"
|
|
::= { wlsxWlanAPEntry 17 }
|
|
|
|
wlanAPExternalAntenna OBJECT-TYPE
|
|
SYNTAX ArubaAntennaSetting
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Antenna Status.
|
|
"
|
|
::= { wlsxWlanAPEntry 18 }
|
|
|
|
wlanAPStatus OBJECT-TYPE
|
|
SYNTAX ArubaAPStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Status.
|
|
"
|
|
::= { wlsxWlanAPEntry 19 }
|
|
|
|
wlanAPNumBootstraps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Number of times the AP has bootstrapped with the controller.
|
|
"
|
|
::= { wlsxWlanAPEntry 20 }
|
|
|
|
wlanAPNumReboots OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Number of times the AP has rebooted.
|
|
"
|
|
::= { wlsxWlanAPEntry 21 }
|
|
|
|
wlanAPUnprovisioned OBJECT-TYPE
|
|
SYNTAX ArubaUnprovisionedStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates whether the AP is unprovisioned due to lack of
|
|
antenna gain or location code settings.
|
|
"
|
|
::= { wlsxWlanAPEntry 22 }
|
|
|
|
wlanAPMonitorMode OBJECT-TYPE
|
|
SYNTAX ArubaMonitorMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates whether any radio on this AP is acting as an
|
|
air monitor.
|
|
"
|
|
::= { wlsxWlanAPEntry 23 }
|
|
|
|
wlanAPFQLNBuilding OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The building component of the AP's FQLN.
|
|
"
|
|
::= { wlsxWlanAPEntry 24 }
|
|
|
|
wlanAPFQLNFloor OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The floor component of the AP's FQLN.
|
|
"
|
|
::= { wlsxWlanAPEntry 25 }
|
|
|
|
wlanAPFQLN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The AP's Fully Qualified Location Name (FQLN).
|
|
"
|
|
::= { wlsxWlanAPEntry 26 }
|
|
|
|
wlanAPFQLNCampus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The campus component of the AP's FQLN.
|
|
"
|
|
::= { wlsxWlanAPEntry 27 }
|
|
|
|
wlanAPLongitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Longitude of the AP. Signed floating-point value.
|
|
"
|
|
::= { wlsxWlanAPEntry 28 }
|
|
|
|
wlanAPLatitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Latitude of the AP. Signed floating-point value.
|
|
"
|
|
::= { wlsxWlanAPEntry 29 }
|
|
|
|
wlanAPAltitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Altitude of the AP. Signed floating-point value.
|
|
"
|
|
::= { wlsxWlanAPEntry 30 }
|
|
|
|
wlanAPMeshRole OBJECT-TYPE
|
|
SYNTAX ArubaMeshRole
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Mesh role
|
|
"
|
|
::= { wlsxWlanAPEntry 31 }
|
|
|
|
wlanAPSysLocation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP sysLocation
|
|
"
|
|
::= { wlsxWlanAPEntry 32 }
|
|
|
|
wlanAPHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Hardware version of the AP.
|
|
"
|
|
::= { wlsxWlanAPEntry 33 }
|
|
|
|
wlanAPSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Software version of the AP.
|
|
"
|
|
::= { wlsxWlanAPEntry 34 }
|
|
|
|
wlanAPNumWarmReboots OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Number of times the AP has warm-rebooted.
|
|
"
|
|
::= { wlsxWlanAPEntry 35 }
|
|
|
|
wlanAPOuterIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Outer IP Address of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 36 }
|
|
|
|
wlanAPRemoteLanIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
LAN IP Address of the Remote Access Point.
|
|
"
|
|
::= { wlsxWlanAPEntry 37 }
|
|
|
|
wlanAPActiveUplink OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet(1),
|
|
usb(2),
|
|
pppoe(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Uplink of the RAP(Ethernet or USB).
|
|
"
|
|
::= { wlsxWlanAPEntry 38 }
|
|
|
|
wlanAPSwitchIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Access points' Serving Controller's IP Address.
|
|
"
|
|
::= { wlsxWlanAPEntry 39 }
|
|
|
|
wlanAPStandbyIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Access points' Standby Controller's IP Address.
|
|
"
|
|
::= { wlsxWlanAPEntry 40 }
|
|
|
|
wlanAPConnectedAsStandby OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(0),
|
|
standby(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Access point connected as active/standby.
|
|
"
|
|
::= { wlsxWlanAPEntry 41 }
|
|
|
|
wlanAPServiceTag OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Access point service tag.
|
|
"
|
|
::= { wlsxWlanAPEntry 42 }
|
|
|
|
wlanAPConnectedAsDatazone OBJECT-TYPE
|
|
SYNTAX INTEGER(0..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object indicate this AP comes from datazone(1-4) or primary zone(0)
|
|
"
|
|
::= { wlsxWlanAPEntry 43 }
|
|
|
|
wlanAPIpv6Address OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..45))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
IPv6 Address of the Access Point
|
|
"
|
|
::= { wlsxWlanAPEntry 44 }
|
|
|
|
wlanAPFlexRadioMode OBJECT-TYPE
|
|
SYNTAX ArubaFlexRadioMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Flex Radio Operating Mode
|
|
"
|
|
::= { wlsxWlanAPEntry 45 }
|
|
wlanAPdot11aAntennaGain10x OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Configured antenna gain for 'A' Radio (antennaGain*10)
|
|
"
|
|
::= { wlsxWlanAPEntry 46 }
|
|
|
|
wlanAPdot11gAntennaGain10x OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Configured antenna gain for 'G' Radio (antennaGain*10)
|
|
"
|
|
::= { wlsxWlanAPEntry 47 }
|
|
|
|
wlanAPDual5GMode OBJECT-TYPE
|
|
SYNTAX ArubaDual5GMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Dual5GHz Operating Mode
|
|
"
|
|
::= { wlsxWlanAPEntry 48 }
|
|
|
|
wlanAPActiveIpAddress OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..45))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
IPv4 or IPv6 Address of the Access Point
|
|
"
|
|
::= { wlsxWlanAPEntry 49 }
|
|
|
|
wlanAPSplit5GMode OBJECT-TYPE
|
|
SYNTAX ArubaSplit5GMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Split 5GHz Operating Mode
|
|
"
|
|
::= { wlsxWlanAPEntry 50 }
|
|
|
|
|
|
-- Radio table is indexed by the Mac Address of the AP and the type of the
|
|
-- radio.
|
|
|
|
wlsxWlanRadioTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanRadioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table lists all the radios known to the
|
|
controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 5 }
|
|
|
|
wlsxWlanRadioEntry OBJECT-TYPE
|
|
SYNTAX WlanRadioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Radio Entry"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber}
|
|
::= { wlsxWlanRadioTable 1 }
|
|
|
|
WlanRadioEntry ::=
|
|
SEQUENCE {
|
|
wlanAPRadioNumber Integer32,
|
|
wlanAPRadioType ArubaPhyType,
|
|
wlanAPRadioChannel Integer32,
|
|
wlanAPRadioTransmitPower Integer32,
|
|
wlanAPRadioMode ArubaAccessPointMode,
|
|
wlanAPRadioUtilization Integer32,
|
|
wlanAPRadioNumAssociatedClients Integer32,
|
|
wlanAPRadioNumMonitoredClients Integer32,
|
|
wlanAPRadioNumActiveBSSIDs Integer32,
|
|
wlanAPRadioNumMonitoredBSSIDs Integer32,
|
|
wlanAPRadioBearing DisplayString,
|
|
wlanAPRadioTiltAngle DisplayString,
|
|
wlanAPRadioHTMode ArubaHTMode,
|
|
wlanAPRadioHTExtChannel ArubaHTExtChannel,
|
|
wlanAPRadioHTChannel DisplayString,
|
|
wlanAPRadioAPName DisplayString,
|
|
wlanAPRadioTransmitPower10x Integer32
|
|
}
|
|
|
|
wlanAPRadioNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The radio number
|
|
"
|
|
::= { wlsxWlanRadioEntry 1 }
|
|
|
|
wlanAPRadioType OBJECT-TYPE
|
|
SYNTAX ArubaPhyType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Type of the Radio
|
|
"
|
|
::= { wlsxWlanRadioEntry 2 }
|
|
|
|
wlanAPRadioChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The channel the radio is currently operating on.
|
|
"
|
|
::= { wlsxWlanRadioEntry 3 }
|
|
|
|
wlanAPRadioTransmitPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The current power level of the radio. (Transmitted as txpwr*2)
|
|
"
|
|
::= { wlsxWlanRadioEntry 4 }
|
|
|
|
wlanAPRadioMode OBJECT-TYPE
|
|
SYNTAX ArubaAccessPointMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Mode in which the radio is operating.
|
|
"
|
|
::= { wlsxWlanRadioEntry 5 }
|
|
|
|
wlanAPRadioUtilization OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Utilization of the radio as a percentage of the total capacity.
|
|
"
|
|
::= { wlsxWlanRadioEntry 6 }
|
|
|
|
|
|
wlanAPRadioNumAssociatedClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of Clients associated to this radio.
|
|
"
|
|
::= { wlsxWlanRadioEntry 7 }
|
|
|
|
|
|
wlanAPRadioNumMonitoredClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of Clients this Radio is monitoring.
|
|
"
|
|
::= { wlsxWlanRadioEntry 8 }
|
|
|
|
|
|
wlanAPRadioNumActiveBSSIDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of active BSSIDs on this Radio.
|
|
"
|
|
::= { wlsxWlanRadioEntry 9 }
|
|
|
|
|
|
wlanAPRadioNumMonitoredBSSIDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of AP BSSIDs this radio is monitoring.
|
|
"
|
|
::= { wlsxWlanRadioEntry 10 }
|
|
|
|
wlanAPRadioBearing OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Antenna Bearing in degrees from True North.
|
|
Unsigned floating-point value. Range: 0-360.
|
|
"
|
|
::= { wlsxWlanRadioEntry 11 }
|
|
|
|
wlanAPRadioTiltAngle OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tilt angle of antenna in degrees. -ve for downtilt,
|
|
+ve for uptilt. Signed floating-point value. Range: -90 to +90.
|
|
"
|
|
::= { wlsxWlanRadioEntry 12 }
|
|
|
|
wlanAPRadioHTMode OBJECT-TYPE
|
|
SYNTAX ArubaHTMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The HT mode of the radio, if any.
|
|
"
|
|
::= { wlsxWlanRadioEntry 13 }
|
|
|
|
wlanAPRadioHTExtChannel OBJECT-TYPE
|
|
SYNTAX ArubaHTExtChannel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the offset of the extension channel, if any. Will return secondary channel
|
|
number in 80+80 MHz mode.
|
|
"
|
|
::= { wlsxWlanRadioEntry 14 }
|
|
|
|
wlanAPRadioHTChannel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A display string indicating the current channel. If wlanAPRadioHTExtChannel
|
|
is set to 'above' or 'below', then the channel number will be appended
|
|
with '+' or '-' respectively.
|
|
"
|
|
::= { wlsxWlanRadioEntry 15 }
|
|
|
|
wlanAPRadioAPName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the AP the radio belongs to"
|
|
::= { wlsxWlanRadioEntry 16 }
|
|
|
|
wlanAPRadioTransmitPower10x OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The current power level of the radio. (Transmitted as txpwr*10)
|
|
"
|
|
::= { wlsxWlanRadioEntry 17 }
|
|
|
|
-- Local Access Point Table.
|
|
|
|
wlsxWlanAPBssidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPBssidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table lists all the BSSIDs active on this controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 7 }
|
|
|
|
wlsxWlanAPBssidEntry OBJECT-TYPE
|
|
SYNTAX WlanAPBssidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BSSID Entry"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
|
|
::= { wlsxWlanAPBssidTable 1 }
|
|
|
|
WlanAPBssidEntry ::=
|
|
SEQUENCE {
|
|
wlanAPBSSID MacAddress,
|
|
wlanAPESSID DisplayString,
|
|
wlanAPBssidSlot Unsigned32,
|
|
wlanAPBssidPort Unsigned32,
|
|
wlanAPBssidPhyType ArubaPhyType,
|
|
wlanAPBssidRogueType ArubaRogueApType,
|
|
wlanAPBssidMode INTEGER,
|
|
wlanAPBssidChannel INTEGER,
|
|
wlanAPBssidUpTime TimeTicks,
|
|
wlanAPBssidInactiveTime TimeTicks,
|
|
wlanAPBssidLoadBalancing TruthValue,
|
|
wlanAPBssidNumAssociatedStations Unsigned32,
|
|
wlanAPBssidAPMacAddress MacAddress,
|
|
wlanAPBssidPhyNumber Integer32,
|
|
wlanAPBssidHTMode ArubaHTMode,
|
|
wlanAPBssidHTExtChannel ArubaHTExtChannel,
|
|
wlanAPBssidHTChannel DisplayString,
|
|
wlanAPBssidSnr Integer32
|
|
}
|
|
|
|
wlanAPBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The MAC address of the Access Point.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 1 }
|
|
|
|
wlanAPESSID OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
ESSID this BSSID is advertising.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 2 }
|
|
|
|
wlanAPBssidSlot OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Slot to which the Access Point is connected.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 3 }
|
|
|
|
wlanAPBssidPort OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Port to which the Access Point is connected.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 4 }
|
|
|
|
wlanAPBssidPhyType OBJECT-TYPE
|
|
SYNTAX ArubaPhyType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Physical Layer Protocol support of the AP.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 5 }
|
|
|
|
wlanAPBssidRogueType OBJECT-TYPE
|
|
SYNTAX ArubaRogueApType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The type of the Rogue.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 6 }
|
|
|
|
wlanAPBssidMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ap(1),
|
|
am(2),
|
|
mpp(3),
|
|
mp(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates whether the Access point is an Air Monitor or regular AP
|
|
or Mesh Portal or Mesh Point.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 7 }
|
|
|
|
wlanAPBssidChannel OBJECT-TYPE
|
|
SYNTAX INTEGER(1..165)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The current operating channel.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 8 }
|
|
|
|
wlanAPBssidUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Time (in hundredths of seconds) since the tunnel was created
|
|
between the access point and controller
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 9 }
|
|
|
|
wlanAPBssidInactiveTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Time (in hundredths of seconds) since any activity took place on
|
|
the BSSID.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 10 }
|
|
|
|
wlanAPBssidLoadBalancing OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates whether load balancing is enabled or not.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 11 }
|
|
|
|
wlanAPBssidNumAssociatedStations OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the number of stations associated to this BSSID.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 12 }
|
|
|
|
|
|
wlanAPBssidAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the Access Point to which this BSSID belongs.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 13 }
|
|
|
|
wlanAPBssidPhyNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the radio number to which this BSSID belongs.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 14 }
|
|
|
|
wlanAPBssidHTMode OBJECT-TYPE
|
|
SYNTAX ArubaHTMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the HT mode of this BSSID, if any.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 15 }
|
|
|
|
wlanAPBssidHTExtChannel OBJECT-TYPE
|
|
SYNTAX ArubaHTExtChannel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the offset of the 40MHz extension channel, if any.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 16 }
|
|
|
|
wlanAPBssidHTChannel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A display string indicating the current channel. If wlanAPBssidHTExtChannel
|
|
is set to 'above' or 'below', then the channel number will be appended
|
|
with '+' or '-' respectively.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 17 }
|
|
|
|
wlanAPBssidSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates the Signal Noise Ratio of this BSSID.
|
|
"
|
|
::= { wlsxWlanAPBssidEntry 18 }
|
|
|
|
-- ESSID Table
|
|
|
|
wlsxWlanESSIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanESSIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists all the ESSIDs advertised by this controller.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 8 }
|
|
|
|
wlsxWlanESSIDEntry OBJECT-TYPE
|
|
SYNTAX WlanESSIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ESSID Entry"
|
|
INDEX {wlanESSID}
|
|
::= { wlsxWlanESSIDTable 1 }
|
|
|
|
WlanESSIDEntry ::=
|
|
SEQUENCE {
|
|
wlanESSID DisplayString,
|
|
wlanESSIDNumStations Unsigned32,
|
|
wlanESSIDNumAccessPointsUp Unsigned32,
|
|
wlanESSIDNumAccessPointsDown Unsigned32,
|
|
wlanESSIDEncryptionType ArubaEncryptionMethods
|
|
}
|
|
|
|
wlanESSID OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The ESSID being advertised.
|
|
"
|
|
::= { wlsxWlanESSIDEntry 1 }
|
|
|
|
wlanESSIDNumStations OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of stations connected to this ESSID.
|
|
"
|
|
::= { wlsxWlanESSIDEntry 2 }
|
|
|
|
wlanESSIDNumAccessPointsUp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of APs currently advertising this ESSID.
|
|
"
|
|
::= { wlsxWlanESSIDEntry 3 }
|
|
|
|
wlanESSIDNumAccessPointsDown OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of APs configured to advertise this ESSID that
|
|
are not currently operational.
|
|
"
|
|
::= { wlsxWlanESSIDEntry 4 }
|
|
|
|
wlanESSIDEncryptionType OBJECT-TYPE
|
|
SYNTAX ArubaEncryptionMethods
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The encryption methods supported on this ESSID.
|
|
"
|
|
::= { wlsxWlanESSIDEntry 5 }
|
|
|
|
-- ESSID Vlan Pool Table
|
|
|
|
wlsxWlanESSIDVlanPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanESSIDVlanPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists all the VLANs associated with this ESSID.
|
|
"
|
|
::= { wlsxWlanAccessPointInfoGroup 9 }
|
|
|
|
wlsxWlanESSIDVlanPoolEntry OBJECT-TYPE
|
|
SYNTAX WlanESSIDVlanPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ESSID Vlan Pool Entry"
|
|
INDEX {wlanESSID, wlanESSIDVlanId}
|
|
::= { wlsxWlanESSIDVlanPoolTable 1 }
|
|
|
|
WlanESSIDVlanPoolEntry ::=
|
|
SEQUENCE {
|
|
wlanESSIDVlanId Unsigned32,
|
|
wlanESSIDVlanPoolStatus RowStatus
|
|
}
|
|
|
|
wlanESSIDVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
VLAN which is part of the VLAN pool for this ESSID.
|
|
"
|
|
::= { wlsxWlanESSIDVlanPoolEntry 1 }
|
|
|
|
wlanESSIDVlanPoolStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Row status object used to indicate the status of the row.
|
|
"
|
|
::= { wlsxWlanESSIDVlanPoolEntry 2 }
|
|
|
|
--Station Info Group contains the State information for the stations.
|
|
|
|
--Station Table contains all the station associated with an AP.
|
|
|
|
wlsxWlanStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists all the wireless stations associated with the
|
|
Access points connected to this controller.
|
|
"
|
|
|
|
::= { wlsxWlanStationInfoGroup 1}
|
|
|
|
wlsxWlanStationEntry OBJECT-TYPE
|
|
SYNTAX WlanStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station Entry"
|
|
INDEX {wlanStaPhyAddress}
|
|
::= { wlsxWlanStationTable 1 }
|
|
|
|
WlanStationEntry ::=
|
|
SEQUENCE {
|
|
wlanStaPhyAddress MacAddress,
|
|
wlanStaApBssid MacAddress,
|
|
wlanStaPhyType ArubaPhyType,
|
|
wlanStaIsAuthenticated TruthValue,
|
|
wlanStaIsAssociated TruthValue,
|
|
wlanStaChannel INTEGER,
|
|
wlanStaVlanId ArubaVlanValidRange,
|
|
wlanStaVOIPState TruthValue,
|
|
wlanStaVOIPProtocol ArubaVoipProtocolType,
|
|
wlanStaTransmitRate Unsigned32,
|
|
wlanStaAssociationID Unsigned32,
|
|
wlanStaAccessPointESSID DisplayString,
|
|
wlanStaPhyNumber Integer32,
|
|
wlanStaRSSI Integer32,
|
|
wlanStaUpTime TimeTicks,
|
|
wlanStaHTMode ArubaHTMode,
|
|
wlanStaTransmitRateCode Unsigned32
|
|
}
|
|
|
|
wlanStaPhyAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Physical Address of the Station.
|
|
"
|
|
::= { wlsxWlanStationEntry 1 }
|
|
|
|
wlanStaApBssid OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Access point to which this station last associated to.
|
|
"
|
|
::= { wlsxWlanStationEntry 2 }
|
|
|
|
wlanStaPhyType OBJECT-TYPE
|
|
SYNTAX ArubaPhyType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Type of the Station.
|
|
"
|
|
::= { wlsxWlanStationEntry 3 }
|
|
|
|
wlanStaIsAuthenticated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates whether the station is authenticated.
|
|
"
|
|
::= { wlsxWlanStationEntry 4 }
|
|
|
|
wlanStaIsAssociated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Indicates whether the station is associated.
|
|
"
|
|
::= { wlsxWlanStationEntry 5 }
|
|
|
|
wlanStaChannel OBJECT-TYPE
|
|
SYNTAX INTEGER(1..165)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Channel on which the station is associated.
|
|
"
|
|
::= { wlsxWlanStationEntry 6 }
|
|
|
|
wlanStaVlanId OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
VLAN in which the station is present.
|
|
"
|
|
::= { wlsxWlanStationEntry 7 }
|
|
|
|
wlanStaVOIPState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The State of VoIP for this station.
|
|
"
|
|
::= { wlsxWlanStationEntry 8 }
|
|
|
|
wlanStaVOIPProtocol OBJECT-TYPE
|
|
SYNTAX ArubaVoipProtocolType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
If VoIP is enabled, the type of the protocol supported.
|
|
"
|
|
::= { wlsxWlanStationEntry 9 }
|
|
|
|
wlanStaTransmitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Transmit rate with which the Station is associated with this system.
|
|
"
|
|
::= { wlsxWlanStationEntry 10 }
|
|
|
|
wlanStaAssociationID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AID with which the Station is associated with this system.
|
|
"
|
|
::= { wlsxWlanStationEntry 11 }
|
|
|
|
wlanStaAccessPointESSID OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
ESSID of the Access point
|
|
"
|
|
::= { wlsxWlanStationEntry 12 }
|
|
|
|
wlanStaPhyNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Radio PHY number to which the station is associated
|
|
"
|
|
::= { wlsxWlanStationEntry 13 }
|
|
|
|
wlanStaRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Signal to Noise ratio for the station.
|
|
"
|
|
::= { wlsxWlanStationEntry 14 }
|
|
|
|
|
|
wlanStaUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Time since the station associated to the current BSSID.
|
|
"
|
|
::= { wlsxWlanStationEntry 15 }
|
|
|
|
wlanStaHTMode OBJECT-TYPE
|
|
SYNTAX ArubaHTMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The HT status of the station.
|
|
"
|
|
::= { wlsxWlanStationEntry 16 }
|
|
|
|
wlanStaTransmitRateCode OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Transmit rate code with which the Station is associated with this system, unit is mbps.
|
|
"
|
|
::= { wlsxWlanStationEntry 17 }
|
|
|
|
--Station Association Failure Table contains all the Stations that failed to
|
|
--associate an ap.
|
|
|
|
wlsxWlanStaAssociationFailureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanStaAssociationFailureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists all the stations and the BSSID's to which they
|
|
failed to associate. Once a station successfully associates,
|
|
association failure entries are not reported for that station.
|
|
"
|
|
|
|
::= { wlsxWlanStationInfoGroup 2}
|
|
|
|
wlsxWlanStaAssociationFailureEntry OBJECT-TYPE
|
|
SYNTAX WlanStaAssociationFailureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station Association Failure Entry"
|
|
INDEX {wlanStaPhyAddress, wlanAPBSSID}
|
|
::= { wlsxWlanStaAssociationFailureTable 1 }
|
|
|
|
WlanStaAssociationFailureEntry ::=
|
|
SEQUENCE {
|
|
wlanStaAssocFailureApName DisplayString,
|
|
wlanStaAssocFailureApEssid DisplayString,
|
|
wlanStaAssocFailurePhyNum Integer32,
|
|
wlanStaAssocFailurePhyType ArubaPhyType,
|
|
wlanStaAssocFailureElapsedTime TimeTicks,
|
|
wlanStaAssocFailureReason DisplayString
|
|
}
|
|
|
|
wlanStaAssocFailureApName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Name of the Access Point to which this station tried to associate.
|
|
"
|
|
::= { wlsxWlanStaAssociationFailureEntry 1 }
|
|
|
|
wlanStaAssocFailureApEssid OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
ESSID to which the station association failed.
|
|
"
|
|
::= { wlsxWlanStaAssociationFailureEntry 2 }
|
|
|
|
wlanStaAssocFailurePhyNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Radio PHY number to which the station tried to associate.
|
|
"
|
|
::= { wlsxWlanStaAssociationFailureEntry 3 }
|
|
|
|
wlanStaAssocFailurePhyType OBJECT-TYPE
|
|
SYNTAX ArubaPhyType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Radio PHY Type of the Station.
|
|
"
|
|
::= { wlsxWlanStaAssociationFailureEntry 4 }
|
|
|
|
wlanStaAssocFailureElapsedTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Elapsed time in timeticks after the station's failure to associate.
|
|
"
|
|
::= { wlsxWlanStaAssociationFailureEntry 5 }
|
|
|
|
wlanStaAssocFailureReason OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Reason for the Station association failure
|
|
"
|
|
::= { wlsxWlanStaAssociationFailureEntry 6 }
|
|
|
|
-- Stats group contains tables for station statistics, BSSID statistics and
|
|
-- AP statistics.
|
|
|
|
wlsxWlanAPStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the statistics of all the Access Points connected
|
|
to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 1 }
|
|
|
|
wlsxWlanAPStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanAPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Point Stats entry"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
|
|
::= { wlsxWlanAPStatsTable 1 }
|
|
|
|
WlanAPStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPCurrentChannel Unsigned32,
|
|
wlanAPNumClients Integer32,
|
|
wlanAPTxPkts Counter32,
|
|
wlanAPTxBytes Counter32,
|
|
wlanAPRxPkts Counter32,
|
|
wlanAPRxBytes Counter32,
|
|
wlanAPTxDeauthentications Counter32,
|
|
wlanAPRxDeauthentications Counter32,
|
|
wlanAPChannelThroughput Integer32,
|
|
wlanAPFrameRetryRate Integer32,
|
|
wlanAPFrameLowSpeedRate Integer32,
|
|
wlanAPFrameNonUnicastRate Integer32,
|
|
wlanAPFrameFragmentationRate Integer32,
|
|
wlanAPFrameBandwidthRate Integer32,
|
|
wlanAPFrameRetryErrorRate Integer32,
|
|
wlanAPChannelErrorRate Integer32,
|
|
wlanAPFrameReceiveErrorRate Integer32,
|
|
wlanAPRxDataPkts Counter32,
|
|
wlanAPRxDataBytes Counter32,
|
|
wlanAPTxDataPkts Counter32,
|
|
wlanAPTxDataBytes Counter32,
|
|
wlanAPRxDataPkts64 Counter64,
|
|
wlanAPRxDataBytes64 Counter64,
|
|
wlanAPTxDataPkts64 Counter64,
|
|
wlanAPTxDataBytes64 Counter64,
|
|
wlanAPWiredRxErrorPkts Counter32,
|
|
wlanAPRxErrorPkts Counter32
|
|
}
|
|
|
|
wlanAPCurrentChannel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The channel the AP is currently using.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 1 }
|
|
|
|
wlanAPNumClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of clients associated to this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 2 }
|
|
|
|
wlanAPTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of packets transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 3 }
|
|
|
|
wlanAPTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 4 }
|
|
|
|
wlanAPRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of packets received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 5 }
|
|
|
|
wlanAPRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 6 }
|
|
|
|
wlanAPTxDeauthentications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of deauthentications transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 7 }
|
|
|
|
wlanAPRxDeauthentications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of deauthentications received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 8 }
|
|
|
|
wlanAPChannelThroughput OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The throughput achieved on this channel.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 9 }
|
|
|
|
wlanAPFrameRetryRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of retry
|
|
packets as a percentage of the total packets
|
|
transmitted and received by this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 10 }
|
|
|
|
wlanAPFrameLowSpeedRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
|
|
for B band) packets as a percentage of the total packets
|
|
transmitted and received by this BSSID
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 11 }
|
|
|
|
wlanAPFrameNonUnicastRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of broadcast and multicast
|
|
packets as a percentage of the total packets
|
|
transmitted on this BSSIDchannel.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 12 }
|
|
|
|
wlanAPFrameFragmentationRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of fragments
|
|
as a percentage of the total packets
|
|
transmitted by this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 13 }
|
|
|
|
wlanAPFrameBandwidthRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The bandwidth of this BSSID in Kbps.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 14 }
|
|
|
|
wlanAPFrameRetryErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets
|
|
received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 15 }
|
|
|
|
wlanAPChannelErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets received
|
|
on the current channel.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 16 }
|
|
|
|
wlanAPFrameReceiveErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets
|
|
received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 17 }
|
|
|
|
wlanAPRxDataPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of packets received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 18 }
|
|
|
|
wlanAPRxDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 19 }
|
|
|
|
wlanAPTxDataPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of packets transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 20 }
|
|
|
|
wlanAPTxDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 21 }
|
|
|
|
wlanAPRxDataPkts64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of packets received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 22 }
|
|
|
|
wlanAPRxDataBytes64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes received on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 23 }
|
|
|
|
wlanAPTxDataPkts64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of packets transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 24 }
|
|
|
|
wlanAPTxDataBytes64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes transmitted on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 25 }
|
|
|
|
wlanAPWiredRxErrorPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets received from the controller on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 26 }
|
|
|
|
wlanAPRxErrorPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets received from stations on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPStatsEntry 27 }
|
|
|
|
-- This table breaks down the AP statistics observed into different
|
|
-- rate categories.
|
|
|
|
wlsxWlanAPRateStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanAPRateStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the AP Packet and Byte Counts
|
|
but represented in terms of rate categories.
|
|
"
|
|
|
|
::= { wlsxWlanAccessPointStatsGroup 2 }
|
|
|
|
wlsxWlanAPRateStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanAPRateStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data rate based packet and byte count entry for an AP"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
|
|
::= { wlsxWlanAPRateStatsTable 1 }
|
|
|
|
WlsxWlanAPRateStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPStatsTotPktsAt1Mbps Counter32,
|
|
wlanAPStatsTotBytesAt1Mbps Counter32,
|
|
wlanAPStatsTotPktsAt2Mbps Counter32,
|
|
wlanAPStatsTotBytesAt2Mbps Counter32,
|
|
wlanAPStatsTotPktsAt5Mbps Counter32,
|
|
wlanAPStatsTotBytesAt5Mbps Counter32,
|
|
wlanAPStatsTotPktsAt11Mbps Counter32,
|
|
wlanAPStatsTotBytesAt11Mbps Counter32,
|
|
wlanAPStatsTotPktsAt6Mbps Counter32,
|
|
wlanAPStatsTotBytesAt6Mbps Counter32,
|
|
wlanAPStatsTotPktsAt12Mbps Counter32,
|
|
wlanAPStatsTotBytesAt12Mbps Counter32,
|
|
wlanAPStatsTotPktsAt18Mbps Counter32,
|
|
wlanAPStatsTotBytesAt18Mbps Counter32,
|
|
wlanAPStatsTotPktsAt24Mbps Counter32,
|
|
wlanAPStatsTotBytesAt24Mbps Counter32,
|
|
wlanAPStatsTotPktsAt36Mbps Counter32,
|
|
wlanAPStatsTotBytesAt36Mbps Counter32,
|
|
wlanAPStatsTotPktsAt48Mbps Counter32,
|
|
wlanAPStatsTotBytesAt48Mbps Counter32,
|
|
wlanAPStatsTotPktsAt54Mbps Counter32,
|
|
wlanAPStatsTotBytesAt54Mbps Counter32,
|
|
wlanAPStatsTotPktsAt9Mbps Counter32,
|
|
wlanAPStatsTotBytesAt9Mbps Counter32
|
|
-- wlanAPStatsTotPktsAtHT6dot5Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT6dot5Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT13Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT13Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT13dot5Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT13dot5Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT15Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT15Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT19dot5Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT19dot5Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT26Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT26Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT27Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT27Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT30Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT30Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT39Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT39Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT40dot5Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT40dot5Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT45Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT45Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT52Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT52Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT54Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT54Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT58dot5Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT58dot5Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT60Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT60Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT65Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT65Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT78Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT78Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT81Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT81Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT90Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT90Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT104Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT104Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT108Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT108Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT117Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT117Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT120Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT120Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT121dot5Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT121dot5Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT130Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT130Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT135Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT135Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT150Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT150Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT162Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT162Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT180Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT180Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT216Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT216Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT240Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT240Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT243Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT243Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT270Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT270Mbps Counter32,
|
|
-- wlanAPStatsTotPktsAtHT300Mbps Counter32,
|
|
-- wlanAPStatsTotBytesAtHT300Mbps Counter32
|
|
}
|
|
|
|
wlanAPStatsTotPktsAt1Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 1Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 1 }
|
|
|
|
wlanAPStatsTotBytesAt1Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 1Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 2 }
|
|
|
|
wlanAPStatsTotPktsAt2Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 2Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 3 }
|
|
|
|
wlanAPStatsTotBytesAt2Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 2Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 4 }
|
|
|
|
wlanAPStatsTotPktsAt5Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 5Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 5 }
|
|
|
|
wlanAPStatsTotBytesAt5Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 5Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 6 }
|
|
|
|
wlanAPStatsTotPktsAt11Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 11Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 7 }
|
|
|
|
wlanAPStatsTotBytesAt11Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 11Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 8 }
|
|
|
|
wlanAPStatsTotPktsAt6Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 6Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 9 }
|
|
|
|
wlanAPStatsTotBytesAt6Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 6Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 10 }
|
|
|
|
wlanAPStatsTotPktsAt12Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 12Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 11 }
|
|
|
|
wlanAPStatsTotBytesAt12Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 12Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 12 }
|
|
|
|
wlanAPStatsTotPktsAt18Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 18Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 13 }
|
|
|
|
wlanAPStatsTotBytesAt18Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 18Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 14 }
|
|
|
|
wlanAPStatsTotPktsAt24Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 24Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 15 }
|
|
|
|
wlanAPStatsTotBytesAt24Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 24Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 16 }
|
|
|
|
wlanAPStatsTotPktsAt36Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 36Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 17 }
|
|
|
|
wlanAPStatsTotBytesAt36Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 36Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 18 }
|
|
|
|
wlanAPStatsTotPktsAt48Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 48Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 19 }
|
|
|
|
wlanAPStatsTotBytesAt48Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 48Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 20 }
|
|
|
|
wlanAPStatsTotPktsAt54Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 54Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 21 }
|
|
|
|
wlanAPStatsTotBytesAt54Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 54Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 22 }
|
|
|
|
wlanAPStatsTotPktsAt9Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets observed
|
|
on this BSSID at 9Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 23 }
|
|
|
|
wlanAPStatsTotBytesAt9Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Bytes observed
|
|
on this BSSID at 9Mbps rate.
|
|
"
|
|
::= { wlsxWlanAPRateStatsEntry 24 }
|
|
|
|
-- wlanAPStatsTotPktsAtHT6dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 6.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 25 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT6dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 6.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 26 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT13Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 13.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 27 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT13Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 13.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 28 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT13dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 13.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 29 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT13dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 13.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 30 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT15Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 15.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 31 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT15Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 15.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 32 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT19dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 19.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 33 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT19dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 19.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 34 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT26Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 26.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 35 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT26Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 26.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 36 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT27Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 27.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 37 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT27Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 27.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 38 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT30Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 30.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 39 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT30Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 30.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 40 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT39Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 39.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 41 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT39Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 39.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 42 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT40dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 40.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 43 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT40dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 40.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 44 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT45Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 45.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 45 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT45Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 45.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 46 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT52Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 52.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 47 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT52Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 52.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 48 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT54Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 54.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 49 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT54Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 54.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 50 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT58dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 58.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 51 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT58dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 58.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 52 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT60Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 60.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 53 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT60Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 60.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 54 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT65Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 65.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 55 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT65Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 65.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 56 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT78Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 78.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 57 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT78Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 78.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 58 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT81Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 81.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 59 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT81Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 81.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 60 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT90Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 90.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 61 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT90Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 90.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 62 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT104Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 104.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 63 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT104Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 104.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 64 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT108Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 108.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 65 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT108Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 108.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 66 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT117Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 117.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 67 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT117Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 117.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 68 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT120Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 120.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 69 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT120Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 120.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 70 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT121dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 121.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 71 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT121dot5Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 121.5 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 72 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT130Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 130.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 73 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT130Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 130.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 74 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT135Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 135.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 75 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT135Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 135.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 76 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT150Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 150.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 77 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT150Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 150.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 78 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT162Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 162.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 79 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT162Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 162.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 80 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT180Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 180.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 81 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT180Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 180.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 82 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT216Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 216.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 83 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT216Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 216.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 84 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT240Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 240.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 85 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT240Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 240.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 86 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT243Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 243.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 87 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT243Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 243.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 88 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT270Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 270.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 89 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT270Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 270.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 90 }
|
|
--
|
|
-- wlanAPStatsTotPktsAtHT300Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of packets observed
|
|
-- on this BSSID at the HT 300.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 91 }
|
|
--
|
|
-- wlanAPStatsTotBytesAtHT300Mbps OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- This attribute indicates the total number of bytes observed
|
|
-- on this BSSID at the HT 300.0 rate.
|
|
-- "
|
|
-- ::= { wlsxWlanAPRateStatsEntry 92 }
|
|
|
|
-- This table breaks down the BSSID statistics observed based on the
|
|
-- Destination Address Types.
|
|
|
|
wlsxWlanAPDATypeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanAPDATypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the per BSSID Packet and Byte Counts
|
|
but broken down in terms of Destination Address Type.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 3 }
|
|
|
|
wlsxWlanAPDATypeStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanAPDATypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination Address based packet and byte count entry for an AP"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
|
|
::= { wlsxWlanAPDATypeStatsTable 1 }
|
|
|
|
WlsxWlanAPDATypeStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPStatsTotDABroadcastPkts Counter32 ,
|
|
wlanAPStatsTotDABroadcastBytes Counter32 ,
|
|
wlanAPStatsTotDAMulticastPkts Counter32 ,
|
|
wlanAPStatsTotDAMulticastBytes Counter32 ,
|
|
wlanAPStatsTotDAUnicastPkts Counter32 ,
|
|
wlanAPStatsTotDAUnicastBytes Counter32
|
|
|
|
}
|
|
|
|
wlanAPStatsTotDABroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Broadcast packets
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPDATypeStatsEntry 1 }
|
|
|
|
wlanAPStatsTotDABroadcastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Broadcast Bytes
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPDATypeStatsEntry 2 }
|
|
|
|
wlanAPStatsTotDAMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Multicast packets
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPDATypeStatsEntry 3 }
|
|
|
|
wlanAPStatsTotDAMulticastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Multicast Bytes
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPDATypeStatsEntry 4 }
|
|
|
|
wlanAPStatsTotDAUnicastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Unicast packets
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPDATypeStatsEntry 5 }
|
|
|
|
wlanAPStatsTotDAUnicastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Unicast Bytes
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPDATypeStatsEntry 6 }
|
|
|
|
-- This table breaks down the BSSID statistics observed based on the
|
|
-- the Type of the Packet.
|
|
|
|
wlsxWlanAPFrameTypeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanAPFrameTypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the per BSSID Packet and Byte Counts
|
|
but broken down into different Frame Types.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 4 }
|
|
|
|
wlsxWlanAPFrameTypeStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanAPFrameTypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Type based packet and byte count entry for an AP"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
|
|
::= { wlsxWlanAPFrameTypeStatsTable 1 }
|
|
|
|
WlsxWlanAPFrameTypeStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPStatsTotMgmtPkts Counter32 ,
|
|
wlanAPStatsTotMgmtBytes Counter32 ,
|
|
wlanAPStatsTotCtrlPkts Counter32 ,
|
|
wlanAPStatsTotCtrlBytes Counter32 ,
|
|
wlanAPStatsTotDataPkts Counter32 ,
|
|
wlanAPStatsTotDataBytes Counter32
|
|
|
|
}
|
|
|
|
wlanAPStatsTotMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Management packets
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPFrameTypeStatsEntry 1 }
|
|
|
|
wlanAPStatsTotMgmtBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Management Bytes
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPFrameTypeStatsEntry 2 }
|
|
|
|
wlanAPStatsTotCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Control packets
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPFrameTypeStatsEntry 3 }
|
|
|
|
wlanAPStatsTotCtrlBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Control Bytes
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPFrameTypeStatsEntry 4 }
|
|
|
|
wlanAPStatsTotDataPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Data packets
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPFrameTypeStatsEntry 5 }
|
|
|
|
wlanAPStatsTotDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of Data Bytes
|
|
observed on this BSSID.
|
|
"
|
|
::= { wlsxWlanAPFrameTypeStatsEntry 6 }
|
|
|
|
-- This table breaks down the BSSID statistics observed into packet size
|
|
-- buckets.
|
|
|
|
wlsxWlanAPPktSizeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanAPPktSizeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the per BSSID Packet Count
|
|
but broken down into different Packet Sizes.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 5 }
|
|
|
|
wlsxWlanAPPktSizeStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanAPPktSizeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet Size based packet count entry for a BSSID"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
|
|
::= { wlsxWlanAPPktSizeStatsTable 1 }
|
|
|
|
WlsxWlanAPPktSizeStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPStatsPkts63Bytes Counter32 ,
|
|
wlanAPStatsPkts64To127 Counter32 ,
|
|
wlanAPStatsPkts128To255 Counter32 ,
|
|
wlanAPStatsPkts256To511 Counter32 ,
|
|
wlanAPStatsPkts512To1023 Counter32 ,
|
|
wlanAPStatsPkts1024To1518 Counter32
|
|
|
|
}
|
|
|
|
wlanAPStatsPkts63Bytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets that were
|
|
less than 64 bytes long.
|
|
"
|
|
::= { wlsxWlanAPPktSizeStatsEntry 1 }
|
|
|
|
wlanAPStatsPkts64To127 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets that were
|
|
between 64 and 127 bytes long.
|
|
"
|
|
::= { wlsxWlanAPPktSizeStatsEntry 2 }
|
|
|
|
wlanAPStatsPkts128To255 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets that were
|
|
between 128 and 255 bytes long.
|
|
"
|
|
::= { wlsxWlanAPPktSizeStatsEntry 3 }
|
|
|
|
wlanAPStatsPkts256To511 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets that were
|
|
between 256 and 511 bytes long.
|
|
"
|
|
::= { wlsxWlanAPPktSizeStatsEntry 4 }
|
|
|
|
wlanAPStatsPkts512To1023 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets that were
|
|
between 512 and 1023 bytes long.
|
|
"
|
|
::= { wlsxWlanAPPktSizeStatsEntry 5 }
|
|
|
|
wlanAPStatsPkts1024To1518 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of packets that were
|
|
between 1024 and 1518 bytes long.
|
|
"
|
|
::= { wlsxWlanAPPktSizeStatsEntry 6 }
|
|
|
|
|
|
-- AP Chan Stats table
|
|
|
|
wlsxWlanAPChStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPChStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the Channel statistics of all the Access Points
|
|
connected to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 6 }
|
|
|
|
wlsxWlanAPChStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanAPChStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Point Channel Stats entry"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber}
|
|
::= { wlsxWlanAPChStatsTable 1 }
|
|
|
|
WlanAPChStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPChannelNumber INTEGER,
|
|
wlanAPChNumStations Integer32,
|
|
wlanAPChTotPkts Counter32,
|
|
wlanAPChTotBytes Counter32,
|
|
wlanAPChTotRetryPkts Counter32,
|
|
wlanAPChTotFragmentedPkts Counter32,
|
|
wlanAPChTotPhyErrPkts Counter32,
|
|
wlanAPChTotMacErrPkts Counter32,
|
|
wlanAPChNoise Integer32,
|
|
wlanAPChCoverageIndex Integer32,
|
|
wlanAPChInterferenceIndex Integer32,
|
|
wlanAPChFrameRetryRate Integer32,
|
|
wlanAPChFrameLowSpeedRate Integer32,
|
|
wlanAPChFrameNonUnicastRate Integer32,
|
|
wlanAPChFrameFragmentationRate Integer32,
|
|
wlanAPChFrameBandwidthRate Integer32,
|
|
wlanAPChFrameRetryErrorRate Integer32,
|
|
wlanAPChBusyRate Integer32,
|
|
wlanAPChNumAPs Integer32,
|
|
wlanAPChFrameReceiveErrorRate Integer32,
|
|
wlanAPChTransmittedFragmentCount Counter32,
|
|
wlanAPChMulticastTransmittedFrameCount Counter32,
|
|
wlanAPChFailedCount Counter32,
|
|
wlanAPChRetryCount Counter32,
|
|
wlanAPChMultipleRetryCount Counter32,
|
|
wlanAPChFrameDuplicateCount Counter32,
|
|
wlanAPChRTSSuccessCount Counter32,
|
|
wlanAPChRTSFailureCount Counter32,
|
|
wlanAPChACKFailureCount Counter32,
|
|
wlanAPChReceivedFragmentCount Counter32,
|
|
wlanAPChMulticastReceivedFrameCount Counter32,
|
|
wlanAPChFCSErrorCount Counter32,
|
|
wlanAPChTransmittedFrameCount Counter32,
|
|
wlanAPChWEPUndecryptableCount Counter32,
|
|
wlanAPChRxUtilization INTEGER,
|
|
wlanAPChTxUtilization INTEGER,
|
|
wlanAPChUtilization INTEGER
|
|
}
|
|
|
|
wlanAPChannelNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..165)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The channel the AP is currently using.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 1 }
|
|
|
|
wlanAPChNumStations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of stations using this
|
|
channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 2 }
|
|
|
|
wlanAPChTotPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total packets observed on this
|
|
channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 3 }
|
|
|
|
wlanAPChTotBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total Bytes observed on this
|
|
channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 4 }
|
|
|
|
wlanAPChTotRetryPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total Retry Packets observed on this
|
|
channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 5 }
|
|
|
|
wlanAPChTotFragmentedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total Fragmented Packets observed on
|
|
this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 6 }
|
|
|
|
wlanAPChTotPhyErrPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total Physical Error Packets observed
|
|
on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 7 }
|
|
|
|
wlanAPChTotMacErrPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total Mac errors packets observed on
|
|
this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 8 }
|
|
|
|
wlanAPChNoise OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the noise observed on
|
|
this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 9 }
|
|
|
|
wlanAPChCoverageIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the coverage provided by the AP on
|
|
this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 10 }
|
|
|
|
wlanAPChInterferenceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the interference
|
|
observed on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 11 }
|
|
|
|
wlanAPChFrameRetryRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of retry
|
|
packets as a percentage of the total packets
|
|
transmitted and received on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 12 }
|
|
|
|
wlanAPChFrameLowSpeedRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
|
|
for B band) packets as a percentage of the total packets
|
|
transmitted and received on this channel
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 13 }
|
|
|
|
wlanAPChFrameNonUnicastRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of broadcast and multicast
|
|
packets as a percentage of the total packets
|
|
transmitted on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 14 }
|
|
|
|
wlanAPChFrameFragmentationRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of fragments
|
|
as a percentage of the total packets
|
|
transmitted on this channel
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 15 }
|
|
|
|
wlanAPChFrameBandwidthRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The bandwidth of this channel in Kbps.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 16 }
|
|
|
|
wlanAPChFrameRetryErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets
|
|
received on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 17 }
|
|
|
|
wlanAPChBusyRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the busy
|
|
this channel is.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 18 }
|
|
|
|
wlanAPChNumAPs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Access Points
|
|
observed on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 19 }
|
|
|
|
wlanAPChFrameReceiveErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets
|
|
received on this channel.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 20 }
|
|
|
|
wlanAPChTransmittedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall be incremented for an acknowledged MPDU
|
|
with an individual address in the address 1 field or an MPDU
|
|
with a multicast address in the address 1 field of type Data
|
|
or Management.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 21 }
|
|
|
|
wlanAPChMulticastTransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment only when the multicast bit
|
|
is set in the destination MAC address of a successfully
|
|
transmitted MSDU. When operating as a STA in an ESS, where
|
|
these frames are directed to the AP, this implies having
|
|
received an acknowledgment to all associated MPDUs.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 22 }
|
|
|
|
wlanAPChFailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when an MSDU is not transmitted
|
|
successfully due to the number of transmit attempts exceeding
|
|
either the dot11ShortRetryLimit or dot11LongRetryLimit.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 23 }
|
|
|
|
wlanAPChRetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when an MSDU is successfully
|
|
transmitted after one or more retransmissions.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 24 }
|
|
|
|
wlanAPChMultipleRetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when an MSDU is successfully
|
|
transmitted after more than one retransmission.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 25 }
|
|
|
|
wlanAPChFrameDuplicateCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when a frame is received
|
|
that the Sequence Control field indicates is a
|
|
duplicate.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 26 }
|
|
|
|
wlanAPChRTSSuccessCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when a CTS is received in
|
|
response to an RTS.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 27 }
|
|
|
|
wlanAPChRTSFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when a CTS is not received in
|
|
response to an RTS.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 28 }
|
|
|
|
wlanAPChACKFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when an ACK is not received
|
|
when expected.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 29 }
|
|
|
|
wlanAPChReceivedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall be incremented for each successfully
|
|
received MPDU of type Data or Management.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 30 }
|
|
|
|
wlanAPChMulticastReceivedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when a MSDU is received
|
|
with the multicast bit set in the destination
|
|
MAC address.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 31 }
|
|
|
|
wlanAPChFCSErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when an FCS error is
|
|
detected in a received MPDU.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 32 }
|
|
|
|
wlanAPChTransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment for each successfully transmitted
|
|
MSDU.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 33 }
|
|
|
|
wlanAPChWEPUndecryptableCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This counter shall increment when a frame is received with the
|
|
Protected Frame subfield of the Frame Control field set to one and
|
|
the WEPOn value for the key mapped to the transmitter's MAC address
|
|
indicates that the frame should not have been encrypted or that frame
|
|
is discarded due to the receiving STA not implementing the privacy
|
|
option.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 34 }
|
|
|
|
wlanAPChRxUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This is the percentage of time spent by the radio
|
|
in receiving packets.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 35 }
|
|
|
|
wlanAPChTxUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This is the percentage of time spent by the radio
|
|
in transmitting packets.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 36 }
|
|
|
|
wlanAPChUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This is the percentage of time the channel is busy.
|
|
"
|
|
::= { wlsxWlanAPChStatsEntry 37 }
|
|
|
|
-- AP Wired Stats table
|
|
|
|
wlsxWlanAPWiredStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPWiredStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the Wired statistics of all the Access Points
|
|
connected to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 7 }
|
|
|
|
wlsxWlanAPWiredStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanAPWiredStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Access Point Wired Stats entry"
|
|
INDEX {wlanAPMacAddress}
|
|
::= { wlsxWlanAPWiredStatsTable 1 }
|
|
|
|
WlanAPWiredStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPWiredRxPkts Counter32,
|
|
wlanAPWiredRxDroppedPkts Counter32,
|
|
wlanAPWiredRxBytes Counter32,
|
|
wlanAPWiredTxBytes Counter32,
|
|
wlanAPWiredRxRate Gauge32,
|
|
wlanAPWiredTxRate Gauge32
|
|
}
|
|
|
|
wlanAPWiredRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total packets received from the
|
|
AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredStatsEntry 1 }
|
|
|
|
wlanAPWiredRxDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total dropped packets received
|
|
from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredStatsEntry 2 }
|
|
|
|
wlanAPWiredRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes of correct packets
|
|
received from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredStatsEntry 3 }
|
|
|
|
wlanAPWiredTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes transmitted from
|
|
the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredStatsEntry 4 }
|
|
|
|
wlanAPWiredRxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the data rate (kbyte/s)
|
|
received from AP wired side in sampling interval.
|
|
"
|
|
::= { wlsxWlanAPWiredStatsEntry 5 }
|
|
|
|
wlanAPWiredTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the data rate (kbyte/s)
|
|
transmitted from AP wired side in sampling interval.
|
|
"
|
|
::= { wlsxWlanAPWiredStatsEntry 6 }
|
|
|
|
-- AP ESSID Stats table
|
|
|
|
wlsxWlanAPESSIDStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPESSIDStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the ESSID statistics of all the Access Points
|
|
connected to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 8 }
|
|
|
|
wlsxWlanAPESSIDStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanAPESSIDStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Point ESSID Stats entry"
|
|
INDEX {wlanAPMacAddress, wlanESSID}
|
|
::= { wlsxWlanAPESSIDStatsTable 1 }
|
|
|
|
WlanAPESSIDStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPESSIDWirelessRxBytes Counter32,
|
|
wlanAPESSIDWirelessTxBytes Counter32,
|
|
wlanAPESSIDWiredRxBytes Counter32,
|
|
wlanAPESSIDWiredTxBytes Counter32
|
|
}
|
|
|
|
wlanAPESSIDWirelessRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes of correct packets
|
|
received from the AP ESSID wireless side.
|
|
"
|
|
::= { wlsxWlanAPESSIDStatsEntry 1 }
|
|
|
|
wlanAPESSIDWirelessTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes transmitted
|
|
from the AP ESSID wireless side.
|
|
"
|
|
::= { wlsxWlanAPESSIDStatsEntry 2 }
|
|
|
|
wlanAPESSIDWiredRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes of correct packets
|
|
received from the AP ESSID wired side.
|
|
"
|
|
::= { wlsxWlanAPESSIDStatsEntry 3 }
|
|
|
|
wlanAPESSIDWiredTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes transmitted from
|
|
the AP ESSID wired side.
|
|
"
|
|
::= { wlsxWlanAPESSIDStatsEntry 4 }
|
|
|
|
-- AP Radio Stats table
|
|
|
|
wlsxWlanAPRadioStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPRadioStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the Radio statistics of all the Access Points
|
|
connected to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 9 }
|
|
|
|
wlsxWlanAPRadioStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanAPRadioStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Point Radio Stats entry"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber}
|
|
::= { wlsxWlanAPRadioStatsTable 1 }
|
|
|
|
WlanAPRadioStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPRadioRxPkts Counter32,
|
|
wlanAPRadioRxBytes Counter64,
|
|
wlanAPRadioTxPkts Counter32,
|
|
wlanAPRadioTxBytes Counter64,
|
|
wlanAPRadioTxDroppedPkts Counter32,
|
|
wlanAPRadioTxErrorPkts Counter32,
|
|
wlanAPRadioRxRate Gauge32,
|
|
wlanAPRadioTxRate Gauge32,
|
|
wlanApRadioAssocReqCount Counter32,
|
|
wlanApRadioAssocReqSuccCount Counter32,
|
|
wlanApRadioReAssocReqCount Counter32,
|
|
wlanApRadioReAssocReqSuccCount Counter32,
|
|
wlanAPRadioStationDuration Integer32,
|
|
wlanAPRadioAssocSuccPercent Gauge32,
|
|
wlanAPRadioTxDataBytes Counter32
|
|
}
|
|
|
|
wlanAPRadioRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total packets transmitted
|
|
from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 1 }
|
|
|
|
wlanAPRadioRxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total correct bytes
|
|
received from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 2 }
|
|
|
|
wlanAPRadioTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total packets
|
|
transmitted from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 3 }
|
|
|
|
wlanAPRadioTxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes
|
|
transmitted from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 4 }
|
|
|
|
wlanAPRadioTxDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the dropped packets transmitted
|
|
from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 5 }
|
|
|
|
wlanAPRadioTxErrorPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the error packets
|
|
transmitted from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 6 }
|
|
|
|
wlanAPRadioRxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the data rate (kbyte/s)
|
|
received from AP radio wireless side in sampling interval.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 7 }
|
|
|
|
wlanAPRadioTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the data rate (kbyte/s)
|
|
transmitted from AP radio wireless side in sampling interval.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 8 }
|
|
|
|
wlanApRadioAssocReqCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the times of associate request on this
|
|
radio."
|
|
::= { wlsxWlanAPRadioStatsEntry 9 }
|
|
|
|
wlanApRadioAssocReqSuccCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the times of successful associate request
|
|
on this radio."
|
|
::= { wlsxWlanAPRadioStatsEntry 10 }
|
|
|
|
wlanApRadioReAssocReqCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the times of re-associate request on this
|
|
radio."
|
|
::= { wlsxWlanAPRadioStatsEntry 11 }
|
|
|
|
wlanApRadioReAssocReqSuccCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the times of successful re-associate
|
|
request on this radio.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 12 }
|
|
|
|
wlanAPRadioStationDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total occupied duration, which is
|
|
the total duration of user connecting.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 13 }
|
|
|
|
wlanAPRadioAssocSuccPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Association Success Percent.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 14 }
|
|
|
|
wlanAPRadioTxDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total data bytes
|
|
transmitted from the AP radio wireless side.
|
|
"
|
|
::= { wlsxWlanAPRadioStatsEntry 15 }
|
|
|
|
-- AP Wired Port Stats table
|
|
|
|
wlsxWlanAPWiredPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPWiredPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the Wired statistics of all the Access Points
|
|
connected to the controller.
|
|
"
|
|
::= { wlsxWlanAccessPointStatsGroup 10 }
|
|
|
|
wlsxWlanAPWiredPortStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanAPWiredPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Point Wired Port Stats entry"
|
|
INDEX {wlanAPMacAddress, wlanAPPortIndex}
|
|
::= { wlsxWlanAPWiredPortStatsTable 1 }
|
|
|
|
WlanAPWiredPortStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanAPPortIndex Integer32,
|
|
wlanAPPortName DisplayString,
|
|
wlanAPWiredPortRxPkts Counter32,
|
|
wlanAPWiredPortRxDroppedPkts Counter32,
|
|
wlanAPWiredPortRxErrors Counter32,
|
|
wlanAPWiredPortRxBytes Counter64,
|
|
wlanAPWiredPortTxPkts Counter32,
|
|
wlanAPWiredPortTxDroppedPkts Counter32,
|
|
wlanAPWiredPortTxErrors Counter32,
|
|
wlanAPWiredPortTxBytes Counter64,
|
|
wlanAPWiredPortRxRate Gauge32,
|
|
wlanAPWiredPortTxRate Gauge32,
|
|
wlanAPWiredPortSpeed ArubaPortSpeed
|
|
}
|
|
|
|
wlanAPPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Wired Port Mac Index (Offset from base Mac Address)
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 1 }
|
|
|
|
wlanAPPortName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
AP Wired Port Name
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 2 }
|
|
|
|
wlanAPWiredPortRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total packets received from the
|
|
AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 3 }
|
|
|
|
wlanAPWiredPortRxDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total dropped packets received
|
|
from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 4 }
|
|
|
|
wlanAPWiredPortRxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of error packets
|
|
received from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 5 }
|
|
|
|
wlanAPWiredPortRxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes of correct packets
|
|
received from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 6 }
|
|
|
|
wlanAPWiredPortTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total packets transmitted from the
|
|
AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 7 }
|
|
|
|
wlanAPWiredPortTxDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total dropped packets transmitted
|
|
from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 8 }
|
|
|
|
wlanAPWiredPortTxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total number of error packets
|
|
transmitted from the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 9 }
|
|
|
|
|
|
wlanAPWiredPortTxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total bytes transmitted from
|
|
the AP wired side.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 10 }
|
|
|
|
wlanAPWiredPortRxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the data rate (kbyte/s)
|
|
received from AP wired side in sampling interval.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 11 }
|
|
|
|
wlanAPWiredPortTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the data rate (kbyte/s)
|
|
transmitted from AP wired side in sampling interval.
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 12 }
|
|
|
|
wlanAPWiredPortSpeed OBJECT-TYPE
|
|
SYNTAX ArubaPortSpeed
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the speed of the port
|
|
"
|
|
::= { wlsxWlanAPWiredPortStatsEntry 13 }
|
|
|
|
|
|
-- wlsxWlanStationStatsGroup contains all the statistics observed by different
|
|
-- Air Monitors attached to this controller.
|
|
-- Station Statistics are observed by the Air Monitor for that
|
|
-- specific Station.
|
|
|
|
-- Station Statistics are grouped into Generic,
|
|
-- Rate, Destination Address and Frame Type Stats.
|
|
|
|
-- Station Statistics Group contains all the statistics related to
|
|
-- a Station.
|
|
|
|
-- wlsxWlanStationStatsTable will contain all the aggregate statistics collected
|
|
-- for a Station
|
|
|
|
wlsxWlanStationStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanStationStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists statistics of all the wireless stations
|
|
associated with an AP connected to this controller.
|
|
"
|
|
::= { wlsxWlanStationStatsGroup 1}
|
|
|
|
wlsxWlanStationStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanStationStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station Stats Entry"
|
|
INDEX {wlanStaPhyAddress}
|
|
::= { wlsxWlanStationStatsTable 1 }
|
|
|
|
WlanStationStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanStaChannelNum Unsigned32,
|
|
wlanStaTxPkts Counter32,
|
|
wlanStaTxBytes Counter32,
|
|
wlanStaRxPkts Counter32,
|
|
wlanStaRxBytes Counter32,
|
|
wlanStaTxBCastPkts Counter32,
|
|
wlanStaRxBCastBytes Counter32,
|
|
wlanStaTxMCastPkts Counter32,
|
|
wlanStaRxMCastBytes Counter32,
|
|
wlanStaDataPkts Counter32,
|
|
wlanStaCtrlPkts Counter32,
|
|
wlanStaNumAssocRequests Counter32,
|
|
wlanStaNumAuthRequests Counter32,
|
|
wlanStaTxDeauthentications Counter32,
|
|
wlanStaRxDeauthentications Counter32,
|
|
wlanStaFrameRetryRate Integer32,
|
|
wlanStaFrameLowSpeedRate Integer32,
|
|
wlanStaFrameNonUnicastRate Integer32,
|
|
wlanStaFrameFragmentationRate Integer32,
|
|
wlanStaFrameBandwidthRate Integer32,
|
|
wlanStaFrameRetryErrorRate Integer32,
|
|
wlanStaFrameReceiveErrorRate Integer32,
|
|
wlanStaTxBCastBytes Counter32,
|
|
wlanStaTxMCastBytes Counter32,
|
|
wlanStaTxBytes64 Counter64,
|
|
wlanStaRxBytes64 Counter64
|
|
}
|
|
|
|
wlanStaChannelNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The channel the station is currently using.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 1 }
|
|
|
|
wlanStaTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of packets transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 2 }
|
|
|
|
wlanStaTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 3 }
|
|
|
|
wlanStaRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of packets received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 4 }
|
|
|
|
wlanStaRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 5 }
|
|
|
|
wlanStaTxBCastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of broadcast packets transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 6 }
|
|
|
|
wlanStaRxBCastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of broadcast bytes transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 7 }
|
|
|
|
wlanStaTxMCastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of multicast packets transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 8 }
|
|
|
|
wlanStaRxMCastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of multicast bytes transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 9 }
|
|
|
|
wlanStaDataPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of Data packets transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 10 }
|
|
|
|
wlanStaCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of Control packets transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 11 }
|
|
|
|
wlanStaNumAssocRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of Association requests transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 12 }
|
|
|
|
wlanStaNumAuthRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of Authentication requests transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 13 }
|
|
|
|
wlanStaTxDeauthentications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of Deauthentication frames transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 14 }
|
|
|
|
wlanStaRxDeauthentications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of Deauthentication frames received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 15 }
|
|
|
|
wlanStaFrameRetryRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of retry
|
|
packets as a percentage of the total packets
|
|
transmitted and received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 16 }
|
|
|
|
wlanStaFrameLowSpeedRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
|
|
for B band) packets as a percentage of the total packets
|
|
transmitted and received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 17 }
|
|
|
|
wlanStaFrameNonUnicastRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of broadcast and multicast
|
|
packets as a percentage of the total packets
|
|
transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 18 }
|
|
|
|
wlanStaFrameFragmentationRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of fragments
|
|
as a percentage of the total packets
|
|
transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 19 }
|
|
|
|
wlanStaFrameBandwidthRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The bandwidth of this station in Kbps.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 20 }
|
|
|
|
wlanStaFrameRetryErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets
|
|
received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 21 }
|
|
|
|
wlanStaFrameReceiveErrorRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of error packets
|
|
as a percentage of the total packets
|
|
received by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 22 }
|
|
|
|
wlanStaTxBCastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of broadcast bytes transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 23 }
|
|
|
|
wlanStaTxMCastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of multicast bytes transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 24 }
|
|
|
|
wlanStaTxBytes64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes transmitted by this station, 64-bit value
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 25 }
|
|
|
|
wlanStaRxBytes64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of bytes received by this station, 64-bit value
|
|
"
|
|
::= { wlsxWlanStationStatsEntry 26 }
|
|
|
|
|
|
-- This table breaks down the Station statistics into different
|
|
-- rate categories.
|
|
|
|
wlsxWlanStaRateStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanStaRateStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the Packet and Byte Counts for a station
|
|
represented in terms of rate categories.
|
|
"
|
|
::= { wlsxWlanStationStatsGroup 2}
|
|
|
|
wlsxWlanStaRateStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanStaRateStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data rate based packet and byte count entry for a station"
|
|
INDEX {wlanStaPhyAddress}
|
|
::= { wlsxWlanStaRateStatsTable 1 }
|
|
|
|
WlsxWlanStaRateStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanStaTxPktsAt1Mbps Counter32,
|
|
wlanStaTxBytesAt1Mbps Counter32,
|
|
wlanStaTxPktsAt2Mbps Counter32,
|
|
wlanStaTxBytesAt2Mbps Counter32,
|
|
wlanStaTxPktsAt5Mbps Counter32,
|
|
wlanStaTxBytesAt5Mbps Counter32,
|
|
wlanStaTxPktsAt11Mbps Counter32,
|
|
wlanStaTxBytesAt11Mbps Counter32,
|
|
wlanStaTxPktsAt6Mbps Counter32,
|
|
wlanStaTxBytesAt6Mbps Counter32,
|
|
wlanStaTxPktsAt12Mbps Counter32,
|
|
wlanStaTxBytesAt12Mbps Counter32,
|
|
wlanStaTxPktsAt18Mbps Counter32,
|
|
wlanStaTxBytesAt18Mbps Counter32,
|
|
wlanStaTxPktsAt24Mbps Counter32,
|
|
wlanStaTxBytesAt24Mbps Counter32,
|
|
wlanStaTxPktsAt36Mbps Counter32,
|
|
wlanStaTxBytesAt36Mbps Counter32,
|
|
wlanStaTxPktsAt48Mbps Counter32,
|
|
wlanStaTxBytesAt48Mbps Counter32,
|
|
wlanStaTxPktsAt54Mbps Counter32,
|
|
wlanStaTxBytesAt54Mbps Counter32,
|
|
wlanStaRxPktsAt1Mbps Counter32,
|
|
wlanStaRxBytesAt1Mbps Counter32,
|
|
wlanStaRxPktsAt2Mbps Counter32,
|
|
wlanStaRxBytesAt2Mbps Counter32,
|
|
wlanStaRxPktsAt5Mbps Counter32,
|
|
wlanStaRxBytesAt5Mbps Counter32,
|
|
wlanStaRxPktsAt11Mbps Counter32,
|
|
wlanStaRxBytesAt11Mbps Counter32,
|
|
wlanStaRxPktsAt6Mbps Counter32,
|
|
wlanStaRxBytesAt6Mbps Counter32,
|
|
wlanStaRxPktsAt12Mbps Counter32,
|
|
wlanStaRxBytesAt12Mbps Counter32,
|
|
wlanStaRxPktsAt18Mbps Counter32,
|
|
wlanStaRxBytesAt18Mbps Counter32,
|
|
wlanStaRxPktsAt24Mbps Counter32,
|
|
wlanStaRxBytesAt24Mbps Counter32,
|
|
wlanStaRxPktsAt36Mbps Counter32,
|
|
wlanStaRxBytesAt36Mbps Counter32,
|
|
wlanStaRxPktsAt48Mbps Counter32,
|
|
wlanStaRxBytesAt48Mbps Counter32,
|
|
wlanStaRxPktsAt54Mbps Counter32,
|
|
wlanStaRxBytesAt54Mbps Counter32,
|
|
wlanStaTxPktsAt9Mbps Counter32,
|
|
wlanStaTxBytesAt9Mbps Counter32,
|
|
wlanStaRxPktsAt9Mbps Counter32,
|
|
wlanStaRxBytesAt9Mbps Counter32
|
|
}
|
|
|
|
wlanStaTxPktsAt1Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 1Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 1 }
|
|
|
|
wlanStaTxBytesAt1Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 1Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 2 }
|
|
|
|
wlanStaTxPktsAt2Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 2Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 3 }
|
|
|
|
wlanStaTxBytesAt2Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 2Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 4 }
|
|
|
|
wlanStaTxPktsAt5Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 5Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 5 }
|
|
|
|
wlanStaTxBytesAt5Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 5Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 6 }
|
|
|
|
wlanStaTxPktsAt11Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 11Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 7 }
|
|
|
|
wlanStaTxBytesAt11Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 11Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 8 }
|
|
|
|
wlanStaTxPktsAt6Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 6Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 9 }
|
|
|
|
wlanStaTxBytesAt6Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 6Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 10 }
|
|
|
|
wlanStaTxPktsAt12Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 12Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 11 }
|
|
|
|
wlanStaTxBytesAt12Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 12Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 12 }
|
|
|
|
wlanStaTxPktsAt18Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 18Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 13 }
|
|
|
|
wlanStaTxBytesAt18Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 18Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 14 }
|
|
|
|
wlanStaTxPktsAt24Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 24Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 15 }
|
|
|
|
wlanStaTxBytesAt24Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 24Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 16 }
|
|
|
|
wlanStaTxPktsAt36Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 36Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 17 }
|
|
|
|
wlanStaTxBytesAt36Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 36Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 18 }
|
|
|
|
wlanStaTxPktsAt48Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 48Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 19 }
|
|
|
|
wlanStaTxBytesAt48Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 48Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 20 }
|
|
|
|
wlanStaTxPktsAt54Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 54Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 21 }
|
|
|
|
wlanStaTxBytesAt54Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 54Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 22 }
|
|
|
|
wlanStaRxPktsAt1Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 1Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 23 }
|
|
|
|
wlanStaRxBytesAt1Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 1Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 24 }
|
|
|
|
wlanStaRxPktsAt2Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 2Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 25 }
|
|
|
|
wlanStaRxBytesAt2Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 2Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 26 }
|
|
|
|
wlanStaRxPktsAt5Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 5Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 27 }
|
|
|
|
wlanStaRxBytesAt5Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 5Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 28 }
|
|
|
|
wlanStaRxPktsAt11Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 11Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 29 }
|
|
|
|
wlanStaRxBytesAt11Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 11Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 30 }
|
|
|
|
wlanStaRxPktsAt6Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 6Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 31 }
|
|
|
|
wlanStaRxBytesAt6Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 6Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 32 }
|
|
|
|
wlanStaRxPktsAt12Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 12Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 33 }
|
|
|
|
wlanStaRxBytesAt12Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 12Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 34 }
|
|
|
|
wlanStaRxPktsAt18Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 18Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 35 }
|
|
|
|
wlanStaRxBytesAt18Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 18Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 36 }
|
|
|
|
wlanStaRxPktsAt24Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 24Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 37 }
|
|
|
|
wlanStaRxBytesAt24Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 24Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 38 }
|
|
|
|
wlanStaRxPktsAt36Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 36Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 39 }
|
|
|
|
wlanStaRxBytesAt36Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 36Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 40 }
|
|
|
|
wlanStaRxPktsAt48Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 48Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 41 }
|
|
|
|
wlanStaRxBytesAt48Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 48Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 42 }
|
|
|
|
wlanStaRxPktsAt54Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 54Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 43 }
|
|
|
|
wlanStaRxBytesAt54Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 54Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 44 }
|
|
|
|
wlanStaTxPktsAt9Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Transmitted by the
|
|
station at 9Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 45 }
|
|
|
|
wlanStaTxBytesAt9Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Transmitted by the
|
|
station at 9Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 46 }
|
|
|
|
|
|
wlanStaRxPktsAt9Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Packets Received by the
|
|
station at 9Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 47 }
|
|
|
|
wlanStaRxBytesAt9Mbps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Octets Received by the
|
|
station at 9Mbps rate.
|
|
"
|
|
::= { wlsxWlanStaRateStatsEntry 48 }
|
|
|
|
-- This table breaks down the Station statistics based on the
|
|
-- Destination Address Types.
|
|
|
|
wlsxWlanStaDATypeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanStaDATypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the Packet and Byte Counts for a station but
|
|
but broken down in terms of Destination Address Type.
|
|
"
|
|
::= { wlsxWlanStationStatsGroup 3}
|
|
|
|
wlsxWlanStaDATypeStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanStaDATypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Destination Address based packet and byte count entry for a
|
|
station
|
|
"
|
|
INDEX {wlanStaPhyAddress}
|
|
::= { wlsxWlanStaDATypeStatsTable 1 }
|
|
|
|
WlsxWlanStaDATypeStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanStaTxDABroadcastPkts Counter32 ,
|
|
wlanStaTxDABroadcastBytes Counter32 ,
|
|
wlanStaTxDAMulticastPkts Counter32 ,
|
|
wlanStaTxDAMulticastBytes Counter32 ,
|
|
wlanStaTxDAUnicastPkts Counter32 ,
|
|
wlanStaTxDAUnicastBytes Counter32
|
|
|
|
}
|
|
|
|
wlanStaTxDABroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Broadcast packets
|
|
transmitted by this Station.
|
|
"
|
|
::= { wlsxWlanStaDATypeStatsEntry 1 }
|
|
|
|
wlanStaTxDABroadcastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Broadcast Bytes
|
|
transmitted by this Station.
|
|
"
|
|
::= { wlsxWlanStaDATypeStatsEntry 2 }
|
|
|
|
wlanStaTxDAMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Multicast packets
|
|
transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStaDATypeStatsEntry 3 }
|
|
|
|
wlanStaTxDAMulticastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of Multicast Bytes
|
|
transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStaDATypeStatsEntry 4 }
|
|
|
|
wlanStaTxDAUnicastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total of Unicast packets
|
|
transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStaDATypeStatsEntry 5 }
|
|
|
|
wlanStaTxDAUnicastBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the total of Unicast Bytes
|
|
transmitted by this station.
|
|
"
|
|
::= { wlsxWlanStaDATypeStatsEntry 6 }
|
|
|
|
-- This table breaks down the Station statistics based on the
|
|
-- the Type of the Packet.
|
|
|
|
wlsxWlanStaFrameTypeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanStaFrameTypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the Packet and Byte Counts for stations
|
|
but broken down into different Frame Types.
|
|
"
|
|
::= { wlsxWlanStationStatsGroup 4}
|
|
|
|
wlsxWlanStaFrameTypeStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanStaFrameTypeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Type based packet and byte count entry for a station"
|
|
INDEX {wlanStaPhyAddress}
|
|
::= { wlsxWlanStaFrameTypeStatsTable 1 }
|
|
|
|
WlsxWlanStaFrameTypeStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanStaTxMgmtPkts Counter32 ,
|
|
wlanStaTxMgmtBytes Counter32 ,
|
|
wlanStaTxCtrlPkts Counter32 ,
|
|
wlanStaTxCtrlBytes Counter32 ,
|
|
wlanStaTxDataPkts Counter32 ,
|
|
wlanStaTxDataBytes Counter32 ,
|
|
wlanStaRxMgmtPkts Counter32 ,
|
|
wlanStaRxMgmtBytes Counter32 ,
|
|
wlanStaRxCtrlPkts Counter32 ,
|
|
wlanStaRxCtrlBytes Counter32 ,
|
|
wlanStaRxDataPkts Counter32 ,
|
|
wlanStaRxDataBytes Counter32
|
|
|
|
}
|
|
|
|
wlanStaTxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the Transmitted Management packets
|
|
from a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 1 }
|
|
|
|
wlanStaTxMgmtBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the Transmitted Management Bytes
|
|
from a station
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 2 }
|
|
|
|
wlanStaTxCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the Transmitted Control packets
|
|
from a station
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 3 }
|
|
|
|
wlanStaTxCtrlBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the Transmitted Control Bytes
|
|
from a station
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 4 }
|
|
|
|
wlanStaTxDataPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the Transmitted Data packets
|
|
from a station
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 5 }
|
|
|
|
wlanStaTxDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the Transmitted Data Bytes
|
|
observed on this channel.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 6 }
|
|
|
|
wlanStaRxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of received Management packets
|
|
at a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 7 }
|
|
|
|
wlanStaRxMgmtBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of received Management Bytes
|
|
at a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 8 }
|
|
|
|
wlanStaRxCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of received Control packets
|
|
at a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 9 }
|
|
|
|
wlanStaRxCtrlBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of received Control Bytes
|
|
at a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 10 }
|
|
|
|
wlanStaRxDataPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of received Data packets
|
|
at a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 11 }
|
|
|
|
wlanStaRxDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of received Data Bytes
|
|
at a station.
|
|
"
|
|
::= { wlsxWlanStaFrameTypeStatsEntry 12 }
|
|
|
|
|
|
-- This table breaks down the Station statistics received or transmitted by a
|
|
-- station into packet size buckets.
|
|
|
|
wlsxWlanStaPktSizeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxWlanStaPktSizeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table contains all the Packet and Byte Counts for stations
|
|
but broken down into different Packet Sizes.
|
|
"
|
|
::= { wlsxWlanStationStatsGroup 5}
|
|
|
|
wlsxWlanStaPktSizeStatsEntry OBJECT-TYPE
|
|
SYNTAX WlsxWlanStaPktSizeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet Size based packet count entry for a station"
|
|
INDEX {wlanStaPhyAddress}
|
|
::= { wlsxWlanStaPktSizeStatsTable 1 }
|
|
|
|
WlsxWlanStaPktSizeStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanStaTxPkts63Bytes Counter32 ,
|
|
wlanStaTxPkts64To127 Counter32 ,
|
|
wlanStaTxPkts128To255 Counter32 ,
|
|
wlanStaTxPkts256To511 Counter32 ,
|
|
wlanStaTxPkts512To1023 Counter32 ,
|
|
wlanStaTxPkts1024To1518 Counter32 ,
|
|
wlanStaRxPkts63Bytes Counter32 ,
|
|
wlanStaRxPkts64To127 Counter32 ,
|
|
wlanStaRxPkts128To255 Counter32 ,
|
|
wlanStaRxPkts256To511 Counter32 ,
|
|
wlanStaRxPkts512To1023 Counter32 ,
|
|
wlanStaRxPkts1024To1518 Counter32
|
|
|
|
}
|
|
|
|
wlanStaTxPkts63Bytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets transmitted by the
|
|
station that were less than 64 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 1 }
|
|
|
|
wlanStaTxPkts64To127 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets transmitted by the
|
|
station that were between 64 and 127 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 2 }
|
|
|
|
wlanStaTxPkts128To255 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets transmitted by the
|
|
station that were between 128 and 255 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 3 }
|
|
|
|
wlanStaTxPkts256To511 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets transmitted by the
|
|
station that were between 256 and 511 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 4 }
|
|
|
|
wlanStaTxPkts512To1023 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets transmitted by the
|
|
station that were between 512 and 1023 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 5 }
|
|
|
|
wlanStaTxPkts1024To1518 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets transmitted by the
|
|
station that were between 1024 and 1518 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 6 }
|
|
|
|
wlanStaRxPkts63Bytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets Received by the
|
|
station that were less than 64 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 7 }
|
|
|
|
wlanStaRxPkts64To127 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets Received by the
|
|
station that were between 64 and 127 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 8 }
|
|
|
|
wlanStaRxPkts128To255 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets Received by the
|
|
station that were between 128 and 255 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 9 }
|
|
|
|
wlanStaRxPkts256To511 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets Received by the
|
|
station that were between 256 and 511 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 10 }
|
|
|
|
wlanStaRxPkts512To1023 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets Received by the
|
|
station that were between 512 and 1023 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 11 }
|
|
|
|
wlanStaRxPkts1024To1518 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the number of packets Received by the
|
|
station that were between 1024 and 1518 bytes long.
|
|
"
|
|
::= { wlsxWlanStaPktSizeStatsEntry 12 }
|
|
|
|
-- wlsxWlanSwitchStatsGroup contains all statistics related to
|
|
-- the whole network controlled by the controller.
|
|
|
|
-- wlsxWlanESSIDStatsTable contains all statistics collected
|
|
-- for an ESSID on the switch
|
|
|
|
wlsxWlanESSIDStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanESSIDStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists statistics of the ESSID
|
|
controlled by this controller.
|
|
"
|
|
::= { wlsxWlanSwitchStatsGroup 1}
|
|
|
|
wlsxWlanESSIDStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanESSIDStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ESSID Stats Entry"
|
|
INDEX {wlanESSID}
|
|
::= { wlsxWlanESSIDStatsTable 1 }
|
|
|
|
WlanESSIDStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanESSIDRxPkts Counter32,
|
|
wlanESSIDRxDroppedPkts Counter32,
|
|
wlanESSIDRxRetryPkts Counter32,
|
|
wlanESSIDTxPkts Counter32,
|
|
wlanESSIDTxDroppedPkts Counter32,
|
|
wlanESSIDTxRetryPkts Counter32,
|
|
wlanESSIDTxErrorPkts Counter32,
|
|
wlanESSIDRxRate Gauge32,
|
|
wlanESSIDTxRate Gauge32,
|
|
wlanESSIDWiredRxPkts Counter32,
|
|
wlanESSIDWiredRxBytes Counter32,
|
|
wlanESSIDWiredTxBytes Counter32
|
|
}
|
|
|
|
wlanESSIDRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of packets on the ESSID uplink channel
|
|
of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 1 }
|
|
|
|
wlanESSIDRxDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of dropped packets on the ESSID uplink
|
|
channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 2 }
|
|
|
|
wlanESSIDRxRetryPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of re-transmission packets on the ESSID
|
|
uplink channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 3 }
|
|
|
|
wlanESSIDTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of packets on the ESSID downlink channel
|
|
of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 4 }
|
|
|
|
wlanESSIDTxDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of dropped packets on the ESSID downlink
|
|
channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 5 }
|
|
|
|
wlanESSIDTxRetryPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of re-transmission packets on the ESSID
|
|
downlink channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 6 }
|
|
|
|
wlanESSIDTxErrorPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of error packets on the ESSID downlink
|
|
channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 7 }
|
|
|
|
wlanESSIDRxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The data rate received from the ESSID in sampling interval,
|
|
unit is kbyte/s.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 8 }
|
|
|
|
wlanESSIDTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The data rate transmitted from the ESSID in sampling interval,
|
|
unit is kbyte/s.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 9 }
|
|
|
|
wlanESSIDWiredRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of packets on the ESSID uplink
|
|
channel of wired side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 10 }
|
|
|
|
wlanESSIDWiredRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of bytes on the ESSID uplink
|
|
channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 11 }
|
|
|
|
wlanESSIDWiredTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of bytes on the ESSID downlink
|
|
channel of wireless side.
|
|
"
|
|
::= { wlsxWlanESSIDStatsEntry 12 }
|
|
|
|
-- wlsxWlanEthStatsTable will contain all the statistics collected
|
|
-- for all ethernet ports
|
|
|
|
wlsxWlanEthStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanEthStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists statistics of all ethernet ports
|
|
of this controller.
|
|
"
|
|
::= { wlsxWlanSwitchStatsGroup 2}
|
|
|
|
wlsxWlanEthStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanEthStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ethernet Port Stats Entry"
|
|
INDEX {ifIndex}
|
|
::= { wlsxWlanEthStatsTable 1 }
|
|
|
|
WlanEthStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanEthRxRate Gauge32,
|
|
wlanEthTxRate Gauge32
|
|
}
|
|
|
|
wlanEthRxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The data rate received from the ethernet port in sampling interval,
|
|
unit is kbyte/s.
|
|
"
|
|
::= { wlsxWlanEthStatsEntry 1 }
|
|
|
|
wlanEthTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The data rate transmitted from the ethernet port in sampling interval,
|
|
unit is kbyte/s.
|
|
"
|
|
::= { wlsxWlanEthStatsEntry 2 }
|
|
|
|
-- wlsxSSIDConfigGroup contains all configuration related to
|
|
-- the SSID controlled by the controller.
|
|
|
|
-- wlsxSSIDConfigTable contains the global configuration of the SSID
|
|
|
|
wlsxSSIDConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanSSIDConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the configuration of the SSID.
|
|
Note: Currently, this table doesn't return any data.
|
|
"
|
|
::= { wlsxSSIDConfigGroup 1}
|
|
|
|
wlsxSSIDConfigEntry OBJECT-TYPE
|
|
SYNTAX WlanSSIDConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Configuration Entry"
|
|
INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanESSID, wlanESSIDIndex}
|
|
::= { wlsxSSIDConfigTable 1 }
|
|
|
|
WlanSSIDConfigEntry ::=
|
|
SEQUENCE {
|
|
wlanESSIDIndex Integer32,
|
|
wlanSSIDConfigHideSSID TruthValue,
|
|
wlanSSIDConfigNumStaAllowed Unsigned32,
|
|
wlanSSIDConfigWmmBeDscp Unsigned32,
|
|
wlanSSIDConfigWmmBkDscp Unsigned32,
|
|
wlanSSIDConfigWmmViDscp Unsigned32,
|
|
wlanSSIDConfigWmmVoDscp Unsigned32
|
|
}
|
|
|
|
wlanESSIDIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the index of ESSID. We support up to 16 ESSIDs.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 1 }
|
|
|
|
wlanSSIDConfigHideSSID OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates if SSID is hidden or not.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 2 }
|
|
|
|
wlanSSIDConfigNumStaAllowed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the maximum number of stations that are allowed to access into the network.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 3 }
|
|
|
|
wlanSSIDConfigWmmBeDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the QoS priority of best-effort service.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 4 }
|
|
|
|
wlanSSIDConfigWmmBkDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the QoS priority of background service.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 5 }
|
|
|
|
wlanSSIDConfigWmmViDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the QoS priority of video service.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 6 }
|
|
|
|
wlanSSIDConfigWmmVoDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This attribute indicates the QoS priority of voice service.
|
|
"
|
|
::= { wlsxSSIDConfigEntry 7 }
|
|
|
|
-- wlsxAPConfigGroup contains all configuration related to
|
|
-- the APs controlled by the controller.
|
|
|
|
-- wlsxAPConfigTable contains the global configuration of the AP
|
|
|
|
wlsxAPConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAPConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Table lists the configuration of the Access Point.
|
|
"
|
|
::= { wlsxAPConfigGroup 1}
|
|
|
|
wlsxAPConfigEntry OBJECT-TYPE
|
|
SYNTAX WlanAPConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Configuration Entry"
|
|
INDEX {wlanAPMacAddress}
|
|
::= { wlsxAPConfigTable 1 }
|
|
|
|
WlanAPConfigEntry ::=
|
|
SEQUENCE {
|
|
wlanAPConfigNetmask IpAddress,
|
|
wlanAPConfigGateway IpAddress
|
|
}
|
|
|
|
wlanAPConfigNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The netmask of AP IP Address.
|
|
"
|
|
::= { wlsxAPConfigEntry 1 }
|
|
|
|
wlanAPConfigGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The gateway of the AP.
|
|
"
|
|
::= { wlsxAPConfigEntry 2 }
|
|
|
|
--Trap Definition
|
|
wlsxRAPActiveUplink NOTIFICATION-TYPE
|
|
OBJECTS {wlanAPActiveUplink, wlanAPMacAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A trap which indicates the RAP Active Uplink"
|
|
::= { wlsxRAPTraps 1 }
|
|
END
|