2701 lines
112 KiB
Plaintext
2701 lines
112 KiB
Plaintext
--
|
|
--defines ROOMALERT26W-MIB for SNMP agent extension of Room Alert 26W
|
|
--Contents: Global Registration Module
|
|
-- Room Alert OIDs - Enterprise 20916
|
|
--Version: 1.1.3
|
|
--Date: 11 September 2007
|
|
--Developed By: AVTECH Software, Inc.
|
|
|
|
--
|
|
--Copyright (c) 2007 AVTECH Software, Inc.
|
|
--
|
|
|
|
ROOMALERT26W-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
IMPORTS
|
|
enterprises, IpAddress, Counter, TimeTicks
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
TRAP-TYPE
|
|
FROM RFC-1215;
|
|
|
|
|
|
avtech OBJECT IDENTIFIER ::= { enterprises 20916 }
|
|
products OBJECT IDENTIFIER ::= { avtech 1 }
|
|
roomalert26w OBJECT IDENTIFIER ::= { products 4 }
|
|
sensors OBJECT IDENTIFIER ::= { roomalert26w 1 }
|
|
internal OBJECT IDENTIFIER ::= { sensors 1 }
|
|
temperature OBJECT IDENTIFIER ::= { internal 1 }
|
|
humidity OBJECT IDENTIFIER ::= { internal 2 }
|
|
heat-index OBJECT IDENTIFIER ::= { internal 5 }
|
|
power OBJECT IDENTIFIER ::= { internal 3 }
|
|
flood OBJECT IDENTIFIER ::= { internal 4 }
|
|
digital OBJECT IDENTIFIER ::= { sensors 2 }
|
|
digital-sen1 OBJECT IDENTIFIER ::= { digital 1 }
|
|
digital-sen2 OBJECT IDENTIFIER ::= { digital 2 }
|
|
digital-sen3 OBJECT IDENTIFIER ::= { digital 3 }
|
|
digital-sen4 OBJECT IDENTIFIER ::= { digital 4 }
|
|
digital-sen5 OBJECT IDENTIFIER ::= { digital 5 }
|
|
digital-sen6 OBJECT IDENTIFIER ::= { digital 6 }
|
|
switch OBJECT IDENTIFIER ::= { sensors 3 }
|
|
wireless OBJECT IDENTIFIER ::= { sensors 4 }
|
|
wish-1 OBJECT IDENTIFIER ::= { wireless 1 }
|
|
wish-1-sensors OBJECT IDENTIFIER ::= { wish-1 4 }
|
|
wish-1-internal OBJECT IDENTIFIER ::= { wish-1-sensors 1 }
|
|
wish-1-external OBJECT IDENTIFIER ::= { wish-1-sensors 2 }
|
|
wish-1-external-1 OBJECT IDENTIFIER ::= { wish-1-external 1 }
|
|
wish-1-external-2 OBJECT IDENTIFIER ::= { wish-1-external 2 }
|
|
wish-2 OBJECT IDENTIFIER ::= { wireless 2 }
|
|
wish-2-sensors OBJECT IDENTIFIER ::= { wish-2 4 }
|
|
wish-2-internal OBJECT IDENTIFIER ::= { wish-2-sensors 1 }
|
|
wish-2-external OBJECT IDENTIFIER ::= { wish-2-sensors 2 }
|
|
wish-2-external-1 OBJECT IDENTIFIER ::= { wish-2-external 1 }
|
|
wish-2-external-2 OBJECT IDENTIFIER ::= { wish-2-external 2 }
|
|
wish-3 OBJECT IDENTIFIER ::= { wireless 3 }
|
|
wish-3-sensors OBJECT IDENTIFIER ::= { wish-3 4 }
|
|
wish-3-internal OBJECT IDENTIFIER ::= { wish-3-sensors 1 }
|
|
wish-3-external OBJECT IDENTIFIER ::= { wish-3-sensors 2 }
|
|
wish-3-external-1 OBJECT IDENTIFIER ::= { wish-3-external 1 }
|
|
wish-3-external-2 OBJECT IDENTIFIER ::= { wish-3-external 2 }
|
|
wish-4 OBJECT IDENTIFIER ::= { wireless 4 }
|
|
wish-4-sensors OBJECT IDENTIFIER ::= { wish-4 4 }
|
|
wish-4-internal OBJECT IDENTIFIER ::= { wish-4-sensors 1 }
|
|
wish-4-external OBJECT IDENTIFIER ::= { wish-4-sensors 2 }
|
|
wish-4-external-1 OBJECT IDENTIFIER ::= { wish-4-external 1 }
|
|
wish-4-external-2 OBJECT IDENTIFIER ::= { wish-4-external 2 }
|
|
wish-5 OBJECT IDENTIFIER ::= { wireless 5 }
|
|
wish-5-sensors OBJECT IDENTIFIER ::= { wish-5 4 }
|
|
wish-5-internal OBJECT IDENTIFIER ::= { wish-5-sensors 1 }
|
|
wish-5-external OBJECT IDENTIFIER ::= { wish-5-sensors 2 }
|
|
wish-5-external-1 OBJECT IDENTIFIER ::= { wish-5-external 1 }
|
|
wish-5-external-2 OBJECT IDENTIFIER ::= { wish-5-external 2 }
|
|
wish-6 OBJECT IDENTIFIER ::= { wireless 6 }
|
|
wish-6-sensors OBJECT IDENTIFIER ::= { wish-6 4 }
|
|
wish-6-internal OBJECT IDENTIFIER ::= { wish-6-sensors 1 }
|
|
wish-6-external OBJECT IDENTIFIER ::= { wish-6-sensors 2 }
|
|
wish-6-external-1 OBJECT IDENTIFIER ::= { wish-6-external 1 }
|
|
wish-6-external-2 OBJECT IDENTIFIER ::= { wish-6-external 2 }
|
|
wish-7 OBJECT IDENTIFIER ::= { wireless 7 }
|
|
wish-7-sensors OBJECT IDENTIFIER ::= { wish-7 4 }
|
|
wish-7-internal OBJECT IDENTIFIER ::= { wish-7-sensors 1 }
|
|
wish-7-external OBJECT IDENTIFIER ::= { wish-7-sensors 2 }
|
|
wish-7-external-1 OBJECT IDENTIFIER ::= { wish-7-external 1 }
|
|
wish-7-external-2 OBJECT IDENTIFIER ::= { wish-7-external 2 }
|
|
wish-8 OBJECT IDENTIFIER ::= { wireless 8 }
|
|
wish-8-sensors OBJECT IDENTIFIER ::= { wish-8 4 }
|
|
wish-8-internal OBJECT IDENTIFIER ::= { wish-8-sensors 1 }
|
|
wish-8-external OBJECT IDENTIFIER ::= { wish-8-sensors 2 }
|
|
wish-8-external-1 OBJECT IDENTIFIER ::= { wish-8-external 1 }
|
|
wish-8-external-2 OBJECT IDENTIFIER ::= { wish-8-external 2 }
|
|
wish-9 OBJECT IDENTIFIER ::= { wireless 9 }
|
|
wish-9-sensors OBJECT IDENTIFIER ::= { wish-9 4 }
|
|
wish-9-internal OBJECT IDENTIFIER ::= { wish-9-sensors 1 }
|
|
wish-9-external OBJECT IDENTIFIER ::= { wish-9-sensors 2 }
|
|
wish-9-external-1 OBJECT IDENTIFIER ::= { wish-9-external 1 }
|
|
wish-9-external-2 OBJECT IDENTIFIER ::= { wish-9-external 2 }
|
|
wish-10 OBJECT IDENTIFIER ::= { wireless 10 }
|
|
wish-10-sensors OBJECT IDENTIFIER ::= { wish-10 4 }
|
|
wish-10-internal OBJECT IDENTIFIER ::= { wish-10-sensors 1 }
|
|
wish-10-external OBJECT IDENTIFIER ::= { wish-10-sensors 2 }
|
|
wish-10-external-1 OBJECT IDENTIFIER ::= { wish-10-external 1 }
|
|
wish-10-external-2 OBJECT IDENTIFIER ::= { wish-10-external 2 }
|
|
wish-11 OBJECT IDENTIFIER ::= { wireless 11 }
|
|
wish-11-sensors OBJECT IDENTIFIER ::= { wish-11 4 }
|
|
wish-11-internal OBJECT IDENTIFIER ::= { wish-11-sensors 1 }
|
|
wish-11-external OBJECT IDENTIFIER ::= { wish-11-sensors 2 }
|
|
wish-11-external-1 OBJECT IDENTIFIER ::= { wish-11-external 1 }
|
|
wish-11-external-2 OBJECT IDENTIFIER ::= { wish-11-external 2 }
|
|
wish-12 OBJECT IDENTIFIER ::= { wireless 12 }
|
|
wish-12-sensors OBJECT IDENTIFIER ::= { wish-12 4 }
|
|
wish-12-internal OBJECT IDENTIFIER ::= { wish-12-sensors 1 }
|
|
wish-12-external OBJECT IDENTIFIER ::= { wish-12-sensors 2 }
|
|
wish-12-external-1 OBJECT IDENTIFIER ::= { wish-12-external 1 }
|
|
wish-12-external-2 OBJECT IDENTIFIER ::= { wish-12-external 2 }
|
|
wish-13 OBJECT IDENTIFIER ::= { wireless 13 }
|
|
wish-13-sensors OBJECT IDENTIFIER ::= { wish-13 4 }
|
|
wish-13-internal OBJECT IDENTIFIER ::= { wish-13-sensors 1 }
|
|
wish-13-external OBJECT IDENTIFIER ::= { wish-13-sensors 2 }
|
|
wish-13-external-1 OBJECT IDENTIFIER ::= { wish-13-external 1 }
|
|
wish-13-external-2 OBJECT IDENTIFIER ::= { wish-13-external 2 }
|
|
wish-14 OBJECT IDENTIFIER ::= { wireless 14 }
|
|
wish-14-sensors OBJECT IDENTIFIER ::= { wish-14 4 }
|
|
wish-14-internal OBJECT IDENTIFIER ::= { wish-14-sensors 1 }
|
|
wish-14-external OBJECT IDENTIFIER ::= { wish-14-sensors 2 }
|
|
wish-14-external-1 OBJECT IDENTIFIER ::= { wish-14-external 1 }
|
|
wish-14-external-2 OBJECT IDENTIFIER ::= { wish-14-external 2 }
|
|
wish-15 OBJECT IDENTIFIER ::= { wireless 15 }
|
|
wish-15-sensors OBJECT IDENTIFIER ::= { wish-15 4 }
|
|
wish-15-internal OBJECT IDENTIFIER ::= { wish-15-sensors 1 }
|
|
wish-15-external OBJECT IDENTIFIER ::= { wish-15-sensors 2 }
|
|
wish-15-external-1 OBJECT IDENTIFIER ::= { wish-15-external 1 }
|
|
wish-15-external-2 OBJECT IDENTIFIER ::= { wish-15-external 2 }
|
|
traps OBJECT IDENTIFIER ::= { roomalert26w 2 }
|
|
|
|
-- Room Alert 26W MIB
|
|
-- Parameters
|
|
|
|
|
|
internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
|
|
::= { temperature 1 }
|
|
|
|
internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
|
|
::= { temperature 2 }
|
|
|
|
internal-humidity OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The internal relative humidity reading in %RH. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
|
|
::= { humidity 1 }
|
|
|
|
internal-heat-index OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION "The internal heat index reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
|
|
::= { heat-index 1 }
|
|
|
|
internal-heat-indexC OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION "The internal heat index reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
|
|
::= { heat-index 2 }
|
|
|
|
internal-power OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current status of the Room Alert 26E/W power supply. A '0' indicates the unit is running on AC/Utility power. A '1' indicates the unit is running on battery backup power."
|
|
::= { power 1 }
|
|
|
|
flood-detected OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current status of the internal flood sensor. A '0' indicates that no water is currently detected. A '1' indicates the unit has detected water somewhere on the connected sensor cable."
|
|
::= { flood 1 }
|
|
|
|
cable-fault OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current status of the flood sensor cable. A '0' indicates the flood cable is connected and functioning properly. A '1' indicates the flood cable is not connected has a malfunction."
|
|
::= { flood 2 }
|
|
|
|
digital-sen1-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
|
|
::= { digital-sen1 1 }
|
|
|
|
digital-sen1-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
|
|
::= { digital-sen1 2 }
|
|
|
|
digital-sen1-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
|
|
::= { digital-sen1 3 }
|
|
|
|
digital-sen1-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
|
|
::= { digital-sen1 4 }
|
|
|
|
digital-sen1-5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { digital-sen1 5 }
|
|
|
|
digital-sen2-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
|
|
::= { digital-sen2 1 }
|
|
|
|
digital-sen2-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
|
|
::= { digital-sen2 2 }
|
|
|
|
digital-sen2-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
|
|
::= { digital-sen2 3 }
|
|
|
|
digital-sen2-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
|
|
::= { digital-sen2 4 }
|
|
|
|
digital-sen3-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
|
|
::= { digital-sen3 1 }
|
|
|
|
digital-sen3-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
|
|
::= { digital-sen3 2 }
|
|
|
|
digital-sen3-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
|
|
::= { digital-sen3 3 }
|
|
|
|
digital-sen3-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
|
|
::= { digital-sen3 4 }
|
|
|
|
digital-sen4-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
|
|
::= { digital-sen4 1 }
|
|
|
|
digital-sen4-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
|
|
::= { digital-sen4 2 }
|
|
|
|
digital-sen4-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
|
|
::= { digital-sen4 3 }
|
|
|
|
digital-sen4-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
|
|
::= { digital-sen4 4 }
|
|
|
|
digital-sen5-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
|
|
::= { digital-sen5 1 }
|
|
|
|
digital-sen5-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
|
|
::= { digital-sen5 2 }
|
|
|
|
digital-sen5-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
|
|
::= { digital-sen5 3 }
|
|
|
|
digital-sen5-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
|
|
::= { digital-sen5 4 }
|
|
|
|
digital-sen6-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
|
|
::= { digital-sen6 1 }
|
|
|
|
digital-sen6-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
|
|
::= { digital-sen6 2 }
|
|
|
|
digital-sen6-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
|
|
::= { digital-sen6 3 }
|
|
|
|
digital-sen6-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
|
|
::= { digital-sen6 4 }
|
|
|
|
switch-sen1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 1 }
|
|
|
|
switch-sen2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 2 }
|
|
|
|
switch-sen3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 3 }
|
|
|
|
switch-sen4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 4 }
|
|
|
|
switch-sen5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 5 }
|
|
|
|
switch-sen6 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 6 }
|
|
|
|
switch-sen7 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 7 }
|
|
|
|
switch-sen8 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 8 }
|
|
|
|
switch-sen9 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 9 }
|
|
|
|
switch-sen10 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 10 }
|
|
|
|
switch-sen11 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 11 }
|
|
|
|
switch-sen12 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 12 }
|
|
|
|
switch-sen13 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 13 }
|
|
|
|
switch-sen14 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 14 }
|
|
|
|
switch-sen15 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 15 }
|
|
|
|
switch-sen16 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 16 }
|
|
|
|
wish-1-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-1 1 }
|
|
|
|
wish-1-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-1 2 }
|
|
|
|
wish-1-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-1 3 }
|
|
|
|
wish-1-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-1-internal 1 }
|
|
|
|
wish-1-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-1-internal 2 }
|
|
|
|
wish-1-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-1-internal 3 }
|
|
|
|
wish-1-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-1-external-1 1 }
|
|
|
|
wish-1-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-1-external-1 2 }
|
|
|
|
wish-1-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-1-external-1 3 }
|
|
|
|
wish-1-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-1-external-1 4 }
|
|
|
|
wish-1-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-1-external-1 5 }
|
|
|
|
wish-1-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-1-external-1 6 }
|
|
|
|
wish-1-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-1-external-2 1 }
|
|
|
|
wish-1-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-1-external-2 2 }
|
|
|
|
wish-1-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-1-external-2 3 }
|
|
|
|
wish-1-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-1-external-2 4 }
|
|
|
|
wish-1-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-1-external-2 5 }
|
|
|
|
wish-1-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-1-external-2 6 }
|
|
|
|
wish-1-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-1-external 3 }
|
|
|
|
wish-2-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-2 1 }
|
|
|
|
wish-2-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-2 2 }
|
|
|
|
wish-2-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-2 3 }
|
|
|
|
wish-2-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-2-internal 1 }
|
|
|
|
wish-2-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-2-internal 2 }
|
|
|
|
wish-2-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-2-internal 3 }
|
|
|
|
wish-2-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-2-external-1 1 }
|
|
|
|
wish-2-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-2-external-1 2 }
|
|
|
|
wish-2-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-2-external-1 3 }
|
|
|
|
wish-2-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-2-external-1 4 }
|
|
|
|
wish-2-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-2-external-1 5 }
|
|
|
|
wish-2-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-2-external-1 6 }
|
|
|
|
wish-2-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-2-external-2 1 }
|
|
|
|
wish-2-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-2-external-2 2 }
|
|
|
|
wish-2-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-2-external-2 3 }
|
|
|
|
wish-2-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-2-external-2 4 }
|
|
|
|
wish-2-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-2-external-2 5 }
|
|
|
|
wish-2-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-2-external-2 6 }
|
|
|
|
wish-2-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-2-external 3 }
|
|
|
|
wish-3-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-3 1 }
|
|
|
|
wish-3-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-3 2 }
|
|
|
|
wish-3-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-3 3 }
|
|
|
|
wish-3-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-3-internal 1 }
|
|
|
|
wish-3-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-3-internal 2 }
|
|
|
|
wish-3-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-3-internal 3 }
|
|
|
|
wish-3-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-3-external-1 1 }
|
|
|
|
wish-3-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-3-external-1 2 }
|
|
|
|
wish-3-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-3-external-1 3 }
|
|
|
|
wish-3-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-3-external-1 4 }
|
|
|
|
wish-3-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-3-external-1 5 }
|
|
|
|
wish-3-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-3-external-1 6 }
|
|
|
|
wish-3-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-3-external-2 1 }
|
|
|
|
wish-3-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-3-external-2 2 }
|
|
|
|
wish-3-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-3-external-2 3 }
|
|
|
|
wish-3-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-3-external-2 4 }
|
|
|
|
wish-3-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-3-external-2 5 }
|
|
|
|
wish-3-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-3-external-2 6 }
|
|
|
|
wish-3-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-3-external 3 }
|
|
|
|
wish-4-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-4 1 }
|
|
|
|
wish-4-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-4 2 }
|
|
|
|
wish-4-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-4 3 }
|
|
|
|
wish-4-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-4-internal 1 }
|
|
|
|
wish-4-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-4-internal 2 }
|
|
|
|
wish-4-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-4-internal 3 }
|
|
|
|
wish-4-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-4-external-1 1 }
|
|
|
|
wish-4-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-4-external-1 2 }
|
|
|
|
wish-4-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-4-external-1 3 }
|
|
|
|
wish-4-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-4-external-1 4 }
|
|
|
|
wish-4-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-4-external-1 5 }
|
|
|
|
wish-4-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-4-external-1 6 }
|
|
|
|
wish-4-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-4-external-2 1 }
|
|
|
|
wish-4-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-4-external-2 2 }
|
|
|
|
wish-4-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-4-external-2 3 }
|
|
|
|
wish-4-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-4-external-2 4 }
|
|
|
|
wish-4-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-4-external-2 5 }
|
|
|
|
wish-4-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-4-external-2 6 }
|
|
|
|
wish-4-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-4-external 3 }
|
|
|
|
wish-5-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-5 1 }
|
|
|
|
wish-5-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-5 2 }
|
|
|
|
wish-5-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-5 3 }
|
|
|
|
wish-5-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-5-internal 1 }
|
|
|
|
wish-5-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-5-internal 2 }
|
|
|
|
wish-5-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-5-internal 3 }
|
|
|
|
wish-5-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-5-external-1 1 }
|
|
|
|
wish-5-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-5-external-1 2 }
|
|
|
|
wish-5-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-5-external-1 3 }
|
|
|
|
wish-5-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-5-external-1 4 }
|
|
|
|
wish-5-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-5-external-1 5 }
|
|
|
|
wish-5-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-5-external-1 6 }
|
|
|
|
wish-5-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-5-external-2 1 }
|
|
|
|
wish-5-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-5-external-2 2 }
|
|
|
|
wish-5-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-5-external-2 3 }
|
|
|
|
wish-5-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-5-external-2 4 }
|
|
|
|
wish-5-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-5-external-2 5 }
|
|
|
|
wish-5-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-5-external-2 6 }
|
|
|
|
wish-5-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-5-external 3 }
|
|
|
|
wish-6-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-6 1 }
|
|
|
|
wish-6-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-6 2 }
|
|
|
|
wish-6-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-6 3 }
|
|
|
|
wish-6-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-6-internal 1 }
|
|
|
|
wish-6-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-6-internal 2 }
|
|
|
|
wish-6-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-6-internal 3 }
|
|
|
|
wish-6-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-6-external-1 1 }
|
|
|
|
wish-6-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-6-external-1 2 }
|
|
|
|
wish-6-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-6-external-1 3 }
|
|
|
|
wish-6-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-6-external-1 4 }
|
|
|
|
wish-6-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-6-external-1 5 }
|
|
|
|
wish-6-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-6-external-1 6 }
|
|
|
|
wish-6-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-6-external-2 1 }
|
|
|
|
wish-6-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-6-external-2 2 }
|
|
|
|
wish-6-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-6-external-2 3 }
|
|
|
|
wish-6-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-6-external-2 4 }
|
|
|
|
wish-6-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-6-external-2 5 }
|
|
|
|
wish-6-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-6-external-2 6 }
|
|
|
|
wish-6-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-6-external 3 }
|
|
|
|
wish-7-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-7 1 }
|
|
|
|
wish-7-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-7 2 }
|
|
|
|
wish-7-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-7 3 }
|
|
|
|
wish-7-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-7-internal 1 }
|
|
|
|
wish-7-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-7-internal 2 }
|
|
|
|
wish-7-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-7-internal 3 }
|
|
|
|
wish-7-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-7-external-1 1 }
|
|
|
|
wish-7-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-7-external-1 2 }
|
|
|
|
wish-7-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-7-external-1 3 }
|
|
|
|
wish-7-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-7-external-1 4 }
|
|
|
|
wish-7-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-7-external-1 5 }
|
|
|
|
wish-7-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-7-external-1 6 }
|
|
|
|
wish-7-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-7-external-2 1 }
|
|
|
|
wish-7-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-7-external-2 2 }
|
|
|
|
wish-7-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-7-external-2 3 }
|
|
|
|
wish-7-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-7-external-2 4 }
|
|
|
|
wish-7-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-7-external-2 5 }
|
|
|
|
wish-7-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-7-external-2 6 }
|
|
|
|
wish-7-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-7-external 3 }
|
|
|
|
wish-8-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-8 1 }
|
|
|
|
wish-8-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-8 2 }
|
|
|
|
wish-8-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-8 3 }
|
|
|
|
wish-8-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-8-internal 1 }
|
|
|
|
wish-8-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-8-internal 2 }
|
|
|
|
wish-8-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-8-internal 3 }
|
|
|
|
wish-8-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-8-external-1 1 }
|
|
|
|
wish-8-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-8-external-1 2 }
|
|
|
|
wish-8-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-8-external-1 3 }
|
|
|
|
wish-8-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-8-external-1 4 }
|
|
|
|
wish-8-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-8-external-1 5 }
|
|
|
|
wish-8-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-8-external-1 6 }
|
|
|
|
wish-8-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-8-external-2 1 }
|
|
|
|
wish-8-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-8-external-2 2 }
|
|
|
|
wish-8-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-8-external-2 3 }
|
|
|
|
wish-8-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-8-external-2 4 }
|
|
|
|
wish-8-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-8-external-2 5 }
|
|
|
|
wish-8-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-8-external-2 6 }
|
|
|
|
wish-8-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-8-external 3 }
|
|
|
|
wish-9-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-9 1 }
|
|
|
|
wish-9-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-9 2 }
|
|
|
|
wish-9-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-9 3 }
|
|
|
|
wish-9-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-9-internal 1 }
|
|
|
|
wish-9-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-9-internal 2 }
|
|
|
|
wish-9-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-9-internal 3 }
|
|
|
|
wish-9-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-9-external-1 1 }
|
|
|
|
wish-9-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-9-external-1 2 }
|
|
|
|
wish-9-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-9-external-1 3 }
|
|
|
|
wish-9-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-9-external-1 4 }
|
|
|
|
wish-9-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-9-external-1 5 }
|
|
|
|
wish-9-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-9-external-1 6 }
|
|
|
|
wish-9-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-9-external-2 1 }
|
|
|
|
wish-9-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-9-external-2 2 }
|
|
|
|
wish-9-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-9-external-2 3 }
|
|
|
|
wish-9-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-9-external-2 4 }
|
|
|
|
wish-9-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-9-external-2 5 }
|
|
|
|
wish-9-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-9-external-2 6 }
|
|
|
|
wish-9-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-9-external 3 }
|
|
|
|
wish-10-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-10 1 }
|
|
|
|
wish-10-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-10 2 }
|
|
|
|
wish-10-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-10 3 }
|
|
|
|
wish-10-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-10-internal 1 }
|
|
|
|
wish-10-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-10-internal 2 }
|
|
|
|
wish-10-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-10-internal 3 }
|
|
|
|
wish-10-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-10-external-1 1 }
|
|
|
|
wish-10-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-10-external-1 2 }
|
|
|
|
wish-10-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-10-external-1 3 }
|
|
|
|
wish-10-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-10-external-1 4 }
|
|
|
|
wish-10-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-10-external-1 5 }
|
|
|
|
wish-10-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-10-external-1 6 }
|
|
|
|
wish-10-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-10-external-2 1 }
|
|
|
|
wish-10-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-10-external-2 2 }
|
|
|
|
wish-10-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-10-external-2 3 }
|
|
|
|
wish-10-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-10-external-2 4 }
|
|
|
|
wish-10-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-10-external-2 5 }
|
|
|
|
wish-10-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-10-external-2 6 }
|
|
|
|
wish-10-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-10-external 3 }
|
|
|
|
wish-11-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-11 1 }
|
|
|
|
wish-11-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-11 2 }
|
|
|
|
wish-11-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-11 3 }
|
|
|
|
wish-11-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-11-internal 1 }
|
|
|
|
wish-11-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-11-internal 2 }
|
|
|
|
wish-11-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-11-internal 3 }
|
|
|
|
wish-11-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-11-external-1 1 }
|
|
|
|
wish-11-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-11-external-1 2 }
|
|
|
|
wish-11-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-11-external-1 3 }
|
|
|
|
wish-11-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-11-external-1 4 }
|
|
|
|
wish-11-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-11-external-1 5 }
|
|
|
|
wish-11-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-11-external-1 6 }
|
|
|
|
wish-11-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-11-external-2 1 }
|
|
|
|
wish-11-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-11-external-2 2 }
|
|
|
|
wish-11-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-11-external-2 3 }
|
|
|
|
wish-11-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-11-external-2 4 }
|
|
|
|
wish-11-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-11-external-2 5 }
|
|
|
|
wish-11-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-11-external-2 6 }
|
|
|
|
wish-11-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-11-external 3 }
|
|
|
|
wish-12-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-12 1 }
|
|
|
|
wish-12-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-12 2 }
|
|
|
|
wish-12-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-12 3 }
|
|
|
|
wish-12-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-12-internal 1 }
|
|
|
|
wish-12-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-12-internal 2 }
|
|
|
|
wish-12-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-12-internal 3 }
|
|
|
|
wish-12-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-12-external-1 1 }
|
|
|
|
wish-12-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-12-external-1 2 }
|
|
|
|
wish-12-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-12-external-1 3 }
|
|
|
|
wish-12-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-12-external-1 4 }
|
|
|
|
wish-12-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-12-external-1 5 }
|
|
|
|
wish-12-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-12-external-1 6 }
|
|
|
|
wish-12-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-12-external-2 1 }
|
|
|
|
wish-12-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-12-external-2 2 }
|
|
|
|
wish-12-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-12-external-2 3 }
|
|
|
|
wish-12-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-12-external-2 4 }
|
|
|
|
wish-12-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-12-external-2 5 }
|
|
|
|
wish-12-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-12-external-2 6 }
|
|
|
|
wish-12-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-12-external 3 }
|
|
|
|
wish-13-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-13 1 }
|
|
|
|
wish-13-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-13 2 }
|
|
|
|
wish-13-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-13 3 }
|
|
|
|
wish-13-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-13-internal 1 }
|
|
|
|
wish-13-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-13-internal 2 }
|
|
|
|
wish-13-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-13-internal 3 }
|
|
|
|
wish-13-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-13-external-1 1 }
|
|
|
|
wish-13-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-13-external-1 2 }
|
|
|
|
wish-13-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-13-external-1 3 }
|
|
|
|
wish-13-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-13-external-1 4 }
|
|
|
|
wish-13-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-13-external-1 5 }
|
|
|
|
wish-13-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-13-external-1 6 }
|
|
|
|
wish-13-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-13-external-2 1 }
|
|
|
|
wish-13-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-13-external-2 2 }
|
|
|
|
wish-13-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-13-external-2 3 }
|
|
|
|
wish-13-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-13-external-2 4 }
|
|
|
|
wish-13-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-13-external-2 5 }
|
|
|
|
wish-13-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-13-external-2 6 }
|
|
|
|
wish-13-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-13-external 3 }
|
|
|
|
wish-14-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-14 1 }
|
|
|
|
wish-14-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-14 2 }
|
|
|
|
wish-14-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-14 3 }
|
|
|
|
wish-14-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-14-internal 1 }
|
|
|
|
wish-14-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-14-internal 2 }
|
|
|
|
wish-14-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-14-internal 3 }
|
|
|
|
wish-14-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-14-external-1 1 }
|
|
|
|
wish-14-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-14-external-1 2 }
|
|
|
|
wish-14-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-14-external-1 3 }
|
|
|
|
wish-14-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-14-external-1 4 }
|
|
|
|
wish-14-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-14-external-1 5 }
|
|
|
|
wish-14-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-14-external-1 6 }
|
|
|
|
wish-14-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-14-external-2 1 }
|
|
|
|
wish-14-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-14-external-2 2 }
|
|
|
|
wish-14-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-14-external-2 3 }
|
|
|
|
wish-14-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-14-external-2 4 }
|
|
|
|
wish-14-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-14-external-2 5 }
|
|
|
|
wish-14-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-14-external-2 6 }
|
|
|
|
wish-14-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-14-external 3 }
|
|
|
|
wish-15-enabled OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
|
|
::= { wish-15 1 }
|
|
|
|
wish-15-serial-num OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor."
|
|
::= { wish-15 2 }
|
|
|
|
wish-15-updates OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor."
|
|
::= { wish-15 3 }
|
|
|
|
wish-15-battery-voltage OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
|
|
::= { wish-15-internal 1 }
|
|
|
|
wish-15-internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
|
|
::= { wish-15-internal 2 }
|
|
|
|
wish-15-internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
|
|
::= { wish-15-internal 3 }
|
|
|
|
wish-15-external-1-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-15-external-1 1 }
|
|
|
|
wish-15-external-1-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-15-external-1 2 }
|
|
|
|
wish-15-external-1-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-15-external-1 3 }
|
|
|
|
wish-15-external-1-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-15-external-1 4 }
|
|
|
|
wish-15-external-1-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-15-external-1 5 }
|
|
|
|
wish-15-external-1-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-15-external-1 6 }
|
|
|
|
wish-15-external-2-type OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
|
|
::= { wish-15-external-2 1 }
|
|
|
|
wish-15-external-2-val1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
|
|
::= { wish-15-external-2 2 }
|
|
|
|
wish-15-external-2-val2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
|
|
::= { wish-15-external-2 3 }
|
|
|
|
wish-15-external-2-val3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
|
|
::= { wish-15-external-2 4 }
|
|
|
|
wish-15-external-2-val4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
|
|
::= { wish-15-external-2 5 }
|
|
|
|
wish-15-external-2-val5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
|
|
::= { wish-15-external-2 6 }
|
|
|
|
wish-15-external-switch OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
|
|
::= { wish-15-external 3 }
|
|
|
|
alarmmessage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Last Alarm Message"
|
|
::= { traps 1 }
|
|
|
|
|
|
-- ROOMALERT26W TRAPS
|
|
|
|
tempalarm1-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A tempalarm1 trap signifies that the current
|
|
temperature on external sensor 1 is outside the
|
|
defined high or low threshold."
|
|
::= 1
|
|
|
|
room-alert-26w-snmp-trap TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A room-alert-26w-snmp-trap indicates that an alarm
|
|
condition has occurred on the sensor inidcated
|
|
by the alarmMessage variable."
|
|
::= 2
|
|
|
|
tempalarm2-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A tempalarm2 trap signifies that the current
|
|
temperature on external sensor 2 is outside the
|
|
defined high or low threshold."
|
|
::= 3
|
|
|
|
tempclear2-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A tempclear2 trap signifies that the current
|
|
temperature on external sensor 2 has returned to
|
|
a normal condition and is within the defined
|
|
high or low threshold."
|
|
::= 4
|
|
|
|
tempalarm3-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A tempalarm3 trap signifies that the current
|
|
temperature on external sensor 3 is outside the
|
|
defined high or low threshold."
|
|
::= 5
|
|
|
|
tempclear3-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A tempclear3 trap signifies that the current
|
|
temperature on external sensor 3 has returned to
|
|
a normal condition and is within the defined
|
|
high or low threshold."
|
|
::= 6
|
|
|
|
humidityalarm1-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A humidityalarm1 trap signifies that the current
|
|
humidity on external sensor 1 is outside the
|
|
defined high or low threshold."
|
|
::= 7
|
|
|
|
humidityclear1-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A humidityclear1 trap signifies that the current
|
|
humidity on external sensor 1 has returned to
|
|
a normal condition and is within the defined
|
|
high or low threshold."
|
|
::= 8
|
|
|
|
humidityalarm2-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A humidityalarm2 trap signifies that the current
|
|
humidity on external sensor 2 is outside the
|
|
defined high or low threshold."
|
|
::= 9
|
|
|
|
humidityclear2-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A humidityclear2 trap signifies that the current
|
|
humidity on external sensor 2 has returned to
|
|
a normal condition and is within the defined
|
|
high or low threshold."
|
|
::= 10
|
|
|
|
humidityalarm3-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A humidityalarm3 trap signifies that the current
|
|
humidity on external sensor 3 is outside the
|
|
defined high or low threshold."
|
|
::= 11
|
|
|
|
humidityclear3-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A humidityclear3 trap signifies that the current
|
|
humidity on external sensor 3 has returned to
|
|
a normal condition and is within the defined
|
|
high or low threshold."
|
|
::= 12
|
|
|
|
switchalarm1-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm1 trap signifies that switch sensor 1
|
|
is in an alarm state."
|
|
::= 13
|
|
|
|
switchclear1-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear1 trap signifies that the switch sensor 1
|
|
has returned to a normal state."
|
|
::= 14
|
|
|
|
switchalarm2-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm2 trap signifies that switch sensor 2
|
|
is in an alarm state."
|
|
::= 15
|
|
|
|
switchclear2-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear2 trap signifies that the switch sensor 2
|
|
has returned to a normal state."
|
|
::= 16
|
|
|
|
switchalarm3-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm3 trap signifies that switch sensor 3
|
|
is in an alarm state."
|
|
::= 17
|
|
|
|
switchclear3-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear3 trap signifies that the switch sensor 3
|
|
has returned to a normal state."
|
|
::= 18
|
|
|
|
switchalarm4-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm4 trap signifies that switch sensor 4
|
|
is in an alarm state."
|
|
::= 19
|
|
|
|
switchclear4-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear4 trap signifies that the switch sensor 4
|
|
has returned to a normal state."
|
|
::= 20
|
|
|
|
switchalarm5-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm5 trap signifies that switch sensor 5
|
|
is in an alarm state."
|
|
::= 21
|
|
|
|
switchclear5-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear5 trap signifies that the switch sensor 5
|
|
has returned to a normal state."
|
|
::= 22
|
|
|
|
switchalarm6-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm6 trap signifies that switch sensor 6
|
|
is in an alarm state."
|
|
::= 23
|
|
|
|
switchclear6-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear6 trap signifies that the switch sensor 6
|
|
has returned to a normal state."
|
|
::= 24
|
|
|
|
switchalarm7-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm7 trap signifies that switch sensor 7
|
|
is in an alarm state."
|
|
::= 25
|
|
|
|
switchclear7-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear7 trap signifies that the switch sensor 7
|
|
has returned to a normal state."
|
|
::= 26
|
|
|
|
switchalarm8-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchalarm8 trap signifies that switch sensor 8
|
|
is in an alarm state."
|
|
::= 27
|
|
|
|
switchclear8-26w TRAP-TYPE
|
|
ENTERPRISE roomalert26w
|
|
VARIABLES { alarmmessage }
|
|
DESCRIPTION "A switchclear8 trap signifies that the switch sensor 8
|
|
has returned to a normal state."
|
|
::= 28
|
|
END
|