6456 lines
174 KiB
Plaintext
6456 lines
174 KiB
Plaintext
FOUNDRY-SN-AGENT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,TimeTicks, IpAddress, Counter32, Gauge32,Unsigned32,Integer32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue, TimeStamp
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB -- [RFC 4001]
|
|
CounterBasedGauge64
|
|
FROM HCNUM-TC
|
|
snChassis, snAgentSys, snStack
|
|
FROM FOUNDRY-SN-ROOT-MIB;
|
|
|
|
snAgent MODULE-IDENTITY
|
|
LAST-UPDATED "201112220000Z" -- 22 December 2011
|
|
ORGANIZATION "Brocade Communications Systems, Inc."
|
|
CONTACT-INFO
|
|
"Technical Support Center
|
|
130 Holger Way,
|
|
San Jose, CA 95134
|
|
Email: ipsupport@brocade.com
|
|
Phone: 1-800-752-8061
|
|
URL: www.brocade.com"
|
|
DESCRIPTION
|
|
"Copyright 1996-2010 Brocade Communications Systems, Inc.
|
|
All rights reserved.
|
|
This Brocade Communications Systems SNMP Management Information Base Specification
|
|
embodies Brocade Communications Systems' confidential and proprietary
|
|
intellectual property. Brocade Communications Systems retains all
|
|
title and ownership in the Specification, including any revisions.
|
|
|
|
This Specification is supplied AS IS, and Brocade Communications Systems makes
|
|
no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the specification, and any unintended
|
|
consequence it may on the user environment."
|
|
|
|
REVISION "201112220000Z" -- 22 December 2011
|
|
DESCRIPTION
|
|
"Major Changes in NI 5.3: Added MIBs for Simplified Upgrade,
|
|
Fixes for status for 100G module in blocked slot,
|
|
SNMP support for MR2 module
|
|
Description Updates."
|
|
|
|
REVISION "201006020000Z" -- 04 June 2010
|
|
DESCRIPTION
|
|
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
|
|
|
|
REVISION "200909300000Z" -- September 30, 2009
|
|
DESCRIPTION
|
|
"convert from SMIv1 to SMIv2"
|
|
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 1991 4}
|
|
|
|
-- textual conventions
|
|
|
|
MacAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This data type is used to model media addresses. For many
|
|
types of media, this will be in a binary representation.
|
|
For example, an ethernet address would be represented as
|
|
a string of 6 octets.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
|
|
DisplayString ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used to model textual information taken
|
|
from the NVT ASCII character set. By convention, objects
|
|
with this syntax are declared as having
|
|
SIZE (0..255)"
|
|
SYNTAX OCTET STRING
|
|
|
|
|
|
BrcdImageType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Image types supported by XMR/MLX and CES/CER"
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
managementModuleBoot(2),
|
|
managementModuleMonitor(3),
|
|
managementModuleApplication(4),
|
|
interfaceModuleBoot(5),
|
|
interfaceModuleMonitor(6),
|
|
interfaceModuleApplication(7),
|
|
mgmtAndIntfModuleCombinedApp(8),
|
|
fpgaMBridge(9),
|
|
fpgaMBridge32(10),
|
|
fpgaSBridge(11),
|
|
fpgaHBridge(12),
|
|
fpgaBundled(13),
|
|
fpgaPbifOc(14),
|
|
fpgaStatsOc(15),
|
|
fpgaXppOc(16),
|
|
fpgaPbifMrj(17),
|
|
fpgaStatsMrj(18),
|
|
fpgaXppMrj(19),
|
|
fpgaPbifSp2(20),
|
|
fpgaXgmacSp2(21),
|
|
fpgaXppSp2(22),
|
|
fpgaPbif8x10(23),
|
|
fpgaXpp8x10(24),
|
|
fpgaXpp2x100(25),
|
|
fpgaPbifMetro(26)
|
|
}
|
|
|
|
-- Groups
|
|
|
|
snChasGen OBJECT IDENTIFIER ::= { snChassis 1 }
|
|
snChasPwr OBJECT IDENTIFIER ::= { snChassis 2 }
|
|
snChasFan OBJECT IDENTIFIER ::= { snChassis 3 }
|
|
snChasUnit OBJECT IDENTIFIER ::= { snChassis 4 }
|
|
|
|
|
|
-- SECTION 2: MIB Objects
|
|
|
|
|
|
-- General Chassis Information
|
|
|
|
snChasType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The chassis type represents the type
|
|
of Foundry product being managed. "
|
|
::= { snChasGen 1 }
|
|
|
|
|
|
|
|
snChasSerNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of the chassis. If the
|
|
serial number is unknown or unavailable then
|
|
the value should be a zero length string."
|
|
::= { snChasGen 2 }
|
|
|
|
|
|
|
|
-- Power Supply Status
|
|
|
|
|
|
snChasPwrSupplyStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is being deprecated, please use snChasPwrSupplyTable instead.
|
|
|
|
A bit array that contains the value of the
|
|
Chassis Power Supplies. This is a packed bit string;
|
|
the 2 power supplies status are encoded into 4 bits
|
|
(a nibble).
|
|
|
|
There are multiple power supplies per chassis in this release.
|
|
The following shows the meaning of each bit:
|
|
(bit 0 is the least significant bit).
|
|
|
|
bit position meaning
|
|
------------ -------
|
|
20-31 reserved
|
|
19 Power Supply 8 DC (0=bad, 1=good).
|
|
18 Power Supply 7 DC (0=bad, 1=good).
|
|
17 Power Supply 8 present status (0=present, 1=not-present).
|
|
16 Power Supply 7 present status (0=present, 1=not-present).
|
|
15 Power Supply 6 DC (0=bad, 1=good).
|
|
14 Power Supply 5 DC (0=bad, 1=good).
|
|
13 Power Supply 6 present status (0=present, 1=not-present).
|
|
12 Power Supply 5 present status (0=present, 1=not-present).
|
|
11 Power Supply 4 DC (0=bad, 1=good).
|
|
10 Power Supply 3 DC (0=bad, 1=good).
|
|
9 Power Supply 4 present status (0=present, 1=not-present).
|
|
8 Power Supply 3 present status (0=present, 1=not-present).
|
|
4-7 reserved
|
|
3 Power Supply 2 DC (0=bad, 1=good).
|
|
2 Power Supply 1 DC (0=bad, 1=good).
|
|
1 Power Supply 2 present status (0=present, 1=not-present).
|
|
0 Power Supply 1 present status (0=present, 1=not-present)."
|
|
::= { snChasGen 3 }
|
|
|
|
|
|
-- Fan Status
|
|
|
|
|
|
snChasFanStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is being deprecated, please use snChasFanTable instead.
|
|
|
|
A bit array that contains the value of the
|
|
fan status. This is a packed bit string. The
|
|
status of each fan is encoded into one bit.
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 fan failure.
|
|
1 fan good.
|
|
|
|
There are two fans per VLAN Switch chassis in this release.
|
|
The following shows the meaning of each bit:
|
|
(bit 0 is the least significant bit).
|
|
|
|
bit position meaning
|
|
------------ -------
|
|
6-31 reserved
|
|
5 fan6 status
|
|
4 fan5 status
|
|
3 fan4 status
|
|
2 fan3 status
|
|
1 fan2 status
|
|
0 fan1 status"
|
|
::= { snChasGen 4 }
|
|
|
|
|
|
|
|
|
|
snChasMainBrdDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board description string. (It is obsoleted for Chassis Product)"
|
|
::= { snChasGen 5 }
|
|
|
|
|
|
snChasMainPortTotal OBJECT-TYPE
|
|
SYNTAX INTEGER (1..24)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ports for the main board. (It is obsoleted for Chassis Product)"
|
|
::= { snChasGen 6 }
|
|
|
|
|
|
snChasExpBrdDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expansion board description string. Expansion
|
|
board are those boards attaching on the main board.
|
|
(It is obsoleted for Chassis Product)"
|
|
::= { snChasGen 7 }
|
|
|
|
|
|
snChasExpPortTotal OBJECT-TYPE
|
|
SYNTAX INTEGER (1..24)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ports for the expansion board.
|
|
(It is obsoleted for Chassis Product)"
|
|
::= { snChasGen 8 }
|
|
|
|
|
|
snChasStatusLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel status LEDs. This is a bit-map;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The maximum number of ports in one chassis
|
|
is 24 that means 24 Ports Status LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (Link off)
|
|
1 on (Link on)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
--------"
|
|
::= { snChasGen 9 }
|
|
|
|
|
|
snChasTrafficLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel traffic LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The maximum number of ports in one chassis
|
|
is 24 that means 24 Ports Traffic LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no traffic)
|
|
1 on (traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
--------"
|
|
::= { snChasGen 10 }
|
|
|
|
|
|
snChasMediaLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The maximum number of ports in one chassis is 24
|
|
that means 24 Ports Media LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 half duplex
|
|
1 full duplex
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
---------"
|
|
::= { snChasGen 11 }
|
|
|
|
|
|
snChasEnablePwrSupplyTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate power supply failure traps."
|
|
DEFVAL { enabled }
|
|
::= { snChasGen 12 }
|
|
|
|
snChasMainBrdId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board identifier, which can uniquely identify a board
|
|
type. It is an encoded octet string with the following meaning:
|
|
octet 0 - octet string format version, which identifies the
|
|
format of this string.
|
|
|
|
If format version octet has the value 1, the octets after the
|
|
version octet have the following meaning:
|
|
octet 1 - product type, FIWG=0x57, FIBB=0x42, FIMLS=0x4D
|
|
NI=0x4E, TI=0x54, TIRT=0x52
|
|
octet 2 - board type, POWERPC=1, ALPHA=2
|
|
The length of the octet string is 27.
|
|
|
|
If format version octet has the value 2, the octets after the
|
|
version octet have the following meaning:
|
|
octet 1 - product type:
|
|
BI_WG 0x57
|
|
BI_BB 0x42
|
|
BI_NI 0x4E
|
|
NI_M4 0x4D
|
|
BI_SLB 0x53
|
|
octet 2 - module type:
|
|
MASTER_FIBER_8G 0x0
|
|
MASTER_FIBER_4G 0x1
|
|
MASTER_COPPER_16 0x2
|
|
SLAVE_FIBER_4G 0x3
|
|
FI_MASTER_FIBER_2G 0x4
|
|
FI_MASTER_FIBER_4G 0x5
|
|
MASTER_COPPER_8G 0x6
|
|
FI_MASTER_FIBER_8G 0x7
|
|
SLAVE_FIBER_8G 0x8
|
|
MASTER_COPPER_12_2 0x9
|
|
SLAVE_COPPER_24 0xA
|
|
FI_SLAVE_COPPER_24 0xB
|
|
SLAVE_100FX_8 0xD
|
|
SLAVE_100FX_16 0xC
|
|
SLAVE_COPPER_8G 0xE
|
|
SLAVE_COPPER_16_2 0xF
|
|
STACK_FIBER_8G 0x10
|
|
STACK_COPPER_8G 0x11
|
|
MASTER_FIBER_2G 0x12
|
|
SLAVE_100FX_24 0x13
|
|
MASTER_FIBER_0G 0x14
|
|
POS_622M 0x15
|
|
POS_155M 0x16
|
|
SLAVE_FIBER_2G 0x17
|
|
SLAVE_COPPER_2G 0x18
|
|
FI_SLAVE_FIBER_2G 0x19
|
|
FI_SLAVE_FIBER_4G 0x1A
|
|
FI_SLAVE_FIBER_8G 0x1B
|
|
FI_SLAVE_COPPER_8G 0x1C
|
|
FI_MASTER_COPPER_8G 0x1D
|
|
POS_155M2P 0x1E
|
|
FI_MASTER_COPPER_4G 0x1F
|
|
FI_MASTER_COPPER_2G 0x20
|
|
MASTER_COPPER_4G 0x21
|
|
MASTER_COPPER_2G 0x22
|
|
MASTER_M4_8G 0x23
|
|
MASTER_M4_4G 0x24
|
|
MASTER_M4_2G 0x25
|
|
MASTER_M4_0G 0x26
|
|
MASTER_M5_0G 0x27
|
|
POS_2488M 0x28
|
|
SLAVE_M5_0G 0x29
|
|
POS_N2488M 0x2A
|
|
STACK_IPC_48_2 0x2B
|
|
SLAVE_NPA_FIBER_4G 0x2C
|
|
ATM_2PORT 0x2D
|
|
ATM_4PORT 0x2E
|
|
SLAVE_FIBER_10G 0x2F
|
|
STACK_FES_48_2 0x30
|
|
STACK_FES_24_2 0x31
|
|
STACK_FES_96_4 0x32
|
|
STACK_FES_12G 0x33
|
|
STACK_FESX_24G 0x34
|
|
STACK_FESX_24_2_G 0x35
|
|
STACK_FESX_24_1_G 0x36
|
|
STACK_FESX_48G 0x37
|
|
STACK_FESX_48_2_G 0x38
|
|
STACK_FESX_48_1_G 0x39
|
|
SUPERX_FI_MGMT 0x40
|
|
SUPERX_FI_2P10G 0x41
|
|
SUPERX_FI_24GC 0x42
|
|
SUPERX_FI_24GF 0x43
|
|
SUPERX_FI_2P10G_WAN 0x44
|
|
SUPERX_FI_MGMT_II 0x4a
|
|
SLAVE_JC_48E 0xC3
|
|
SLAVE_JC_48T 0xC4
|
|
MASTER_JC_M4_8G 0xC5
|
|
SLAVE_JC_8G 0xC6
|
|
SLAVE_JC_B16GF 0xC8
|
|
MASTER_JC_B2404 0xC9
|
|
SLAVE_JC_B16GC 0xCA
|
|
|
|
The length of the octet string is 28.
|
|
|
|
Both format version 1 and 2:
|
|
octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6,
|
|
PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81
|
|
octet 4 to
|
|
octet 5 - processor speed in MHz
|
|
octet 6 - MAC type:
|
|
MAC_NONE=0
|
|
MAC_SEEQ_10_100=1,
|
|
MAC_DEC_10_100=2,
|
|
MAC_3COM_10_100=3,
|
|
MAC_X10GMAC_10000=4,
|
|
MAC_SEEQ_1000=5,
|
|
MAC_GMAC_1000=6,
|
|
MAC_VLSI_1000=7
|
|
octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2,
|
|
PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6,
|
|
PHY_BROADCOM_10_100=7, PHY_LEVEL24=8,
|
|
PHY_BROADCOM_10000=9 (for 10G),
|
|
PHY_3COM_10_100=9 (for others)
|
|
octet 8 - port type, COPPER=0, FIBER=1
|
|
octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1,
|
|
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4,
|
|
LHB_FIBER=5
|
|
octet 10 to
|
|
octet 13 - DRAM size in KBytes
|
|
octet 14 to
|
|
octet 17 - boot flash size in KBytes
|
|
octet 18 to
|
|
octet 21 - code flash size in KBytes
|
|
octet 22 to
|
|
octet 27 - serial number.
|
|
|
|
Format version 1 only:
|
|
octet 28 - chassis backplane type.
|
|
chassis4000 = 0x00
|
|
chassis8000 = 0x02
|
|
chassis15000 = 0x01
|
|
chassisFISX = 0x04
|
|
Turbo8 = 0x07 (stack2)
|
|
FastIron2 = 0x06 (stack1)"
|
|
::= { snChasGen 13 }
|
|
|
|
|
|
snChasExpBrdId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expansion board identifier. Expansion board are those
|
|
boards attaching on the main board. It is an encoded octet
|
|
string with the following meaning:
|
|
octet 0 - octet string format version, which identifies
|
|
the format of this string.
|
|
If format version octet has the value 1, the octets after
|
|
the version octet have the following meaning:
|
|
octet 1 - expansion board type, HUNDRED_MEG_1PORT=1,
|
|
HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3,
|
|
HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5,
|
|
GIGA_1PORT=8, GIGA_2PORT=9
|
|
octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1,
|
|
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4
|
|
(It is obsoleted for Chassis Product)"
|
|
::= { snChasGen 14 }
|
|
|
|
|
|
snChasSpeedLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The maximum number of ports in one chassis is 24
|
|
that means 24 Ports Speed LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 10 MBit
|
|
1 100 MBit
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
---------"
|
|
::= { snChasGen 15 }
|
|
|
|
|
|
snChasEnableFanTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate fan failure traps."
|
|
DEFVAL { enabled }
|
|
::= { snChasGen 16 }
|
|
|
|
|
|
snChasIdNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively-assigned chassis identity number,
|
|
used by inventory control."
|
|
::= { snChasGen 17 }
|
|
|
|
|
|
snChasActualTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (-110..250)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of the chassis. Each unit is 0.5 degrees Celcius.
|
|
Only management module built with temperature sensor hardware
|
|
is applicable. For those non-applicable management module, it
|
|
returns no-such-name."
|
|
::= { snChasGen 18 }
|
|
|
|
|
|
snChasWarningTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (0..250)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual temperature higher than this threshold value will trigger
|
|
the switch to send a temperature warning trap. Each unit is 0.5
|
|
degrees Celcius. Only management module built with temperature
|
|
sensor hardware is applicable. For those non-applicable management
|
|
module, it returns no-such-name."
|
|
::= { snChasGen 19 }
|
|
|
|
|
|
snChasShutdownTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (0..250)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual temperature higher than this threshold value will shutdown
|
|
a partial of the switch hardware to cool down the system. Each unit
|
|
is 0.5 degrees Celcius. Only management module built with temperature
|
|
sensor hardware is applicable. For those non-applicable management
|
|
module, it returns no-such-name."
|
|
::= { snChasGen 20 }
|
|
|
|
snChasEnableTempWarnTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate temperature warning traps."
|
|
DEFVAL { enabled }
|
|
::= { snChasGen 21 }
|
|
|
|
-- Flash Card
|
|
|
|
snChasFlashCard OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
flash card status. This is a packed bit string. The
|
|
status of each flash card is encoded into one bit.
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 flash card absent.
|
|
1 flash card present.
|
|
|
|
There are up to two flash cards in this release.
|
|
This object is valid if M4 management module is present.
|
|
The following shows the meaning of each bit:
|
|
(bit 0 is the least significant bit).
|
|
|
|
bit position meaning
|
|
------------ -------
|
|
2-31 reserved
|
|
1 flash card 2 status
|
|
0 flash card 1 status"
|
|
::= { snChasGen 22 }
|
|
|
|
|
|
snChasFlashCardLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
flash card LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each flash card.
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off
|
|
1 on
|
|
"
|
|
::= { snChasGen 23 }
|
|
|
|
|
|
snChasNumSlots OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of slots of the chassis."
|
|
::= { snChasGen 24 }
|
|
|
|
|
|
snChasArchitectureType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stackable(1), -- old stackable
|
|
bigIron(2),
|
|
terathon(3), -- MG-8, NI-40G, IMR
|
|
fifthGen(4) -- XMR, MLX, RX
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Architecture type."
|
|
::= { snChasGen 25 }
|
|
|
|
|
|
snChasProductType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
mg8(1),
|
|
ni40G(2),
|
|
imr(3),
|
|
biRx800(4),
|
|
niXmr16000(5),
|
|
biRx400(6),
|
|
niXmr8000(7),
|
|
biRx200(8),
|
|
niXmr4000(9),
|
|
niMlx16(10),
|
|
niMlx8(11),
|
|
niMlx4(12),
|
|
niMlx32(13),
|
|
niXmr32000(14),
|
|
biRx32(15),
|
|
niCES2000Series(16),
|
|
niCER2000Series(17),
|
|
brMlxE4(18),
|
|
brMlxE8(19),
|
|
brMlxE16(20),
|
|
brMlxE32(21),
|
|
biNI2(50),
|
|
biBB(66),
|
|
biM4(77),
|
|
biNI(78),
|
|
biSLB(83),
|
|
biWG(87)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Product type."
|
|
::= { snChasGen 26 }
|
|
|
|
snChasSystemMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
xmr(1),
|
|
mlx(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System Mode. This object is only applicable to XMR/MLX/MLXe products.
|
|
For example, if snChasProductType is niMlx4/niMlx8/niMlx16/niMlx32 then the
|
|
this object returns mlx(2). If snChasProductType is niXmr4000/niXmr8000
|
|
niXmr160000/niXmr32000 this object returns xmr(1). If snChasProductType
|
|
is brMlxE4/brMlxE8/brMlxE16/brMlxE32 this object
|
|
returns either xmr(1) or mlx(2) depending on the mode of the system.
|
|
This object is not supported for the other products."
|
|
::= { snChasGen 27 }
|
|
|
|
snChasFactoryPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Factory Part number assigned by the manufacturer."
|
|
::= { snChasGen 28 }
|
|
|
|
snChasFactorySerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Factory serial number assigned by the manufacturer."
|
|
::= { snChasGen 29 }
|
|
|
|
-- Power Supply Table
|
|
|
|
|
|
snChasPwrSupplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnChasPwrSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each power supply information. Only installed
|
|
power supply appears in a table row."
|
|
::= { snChasPwr 1 }
|
|
|
|
snChasPwrSupplyEntry OBJECT-TYPE
|
|
SYNTAX SnChasPwrSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the power supply table."
|
|
INDEX { snChasPwrSupplyIndex }
|
|
::= { snChasPwrSupplyTable 1 }
|
|
|
|
SnChasPwrSupplyEntry ::= SEQUENCE {
|
|
snChasPwrSupplyIndex
|
|
Integer32,
|
|
snChasPwrSupplyDescription
|
|
DisplayString,
|
|
snChasPwrSupplyOperStatus
|
|
INTEGER
|
|
}
|
|
|
|
snChasPwrSupplyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to power supply table."
|
|
::= { snChasPwrSupplyEntry 1 }
|
|
|
|
snChasPwrSupplyDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power supply description string."
|
|
::= { snChasPwrSupplyEntry 2 }
|
|
|
|
snChasPwrSupplyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
normal(2),
|
|
failure(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power supply operation status."
|
|
::= { snChasPwrSupplyEntry 3 }
|
|
|
|
|
|
-- Stacking Power Supply Table
|
|
|
|
|
|
snChasPwrSupply2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnChasPwrSupply2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each power supply information for each unit. Only installed
|
|
power supply appears in a table row."
|
|
::= { snChasPwr 2 }
|
|
|
|
snChasPwrSupply2Entry OBJECT-TYPE
|
|
SYNTAX SnChasPwrSupply2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the power supply table."
|
|
INDEX { snChasPwrSupply2Unit, snChasPwrSupply2Index }
|
|
::= { snChasPwrSupply2Table 1 }
|
|
|
|
SnChasPwrSupply2Entry ::= SEQUENCE {
|
|
snChasPwrSupply2Unit
|
|
Integer32,
|
|
snChasPwrSupply2Index
|
|
Integer32 ,
|
|
snChasPwrSupply2Description
|
|
DisplayString,
|
|
snChasPwrSupply2OperStatus
|
|
INTEGER
|
|
}
|
|
|
|
snChasPwrSupply2Unit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to power supply table."
|
|
::= { snChasPwrSupply2Entry 1 }
|
|
|
|
snChasPwrSupply2Index OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to power supply table."
|
|
::= { snChasPwrSupply2Entry 2}
|
|
|
|
snChasPwrSupply2Description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power supply description string."
|
|
::= { snChasPwrSupply2Entry 3 }
|
|
|
|
snChasPwrSupply2OperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
normal(2),
|
|
failure(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power supply operation status."
|
|
::= { snChasPwrSupply2Entry 4 }
|
|
|
|
|
|
-- Fan Table
|
|
|
|
|
|
snChasFanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnChasFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each fan information. Only installed
|
|
fan appears in a table row."
|
|
::= { snChasFan 1 }
|
|
|
|
snChasFanEntry OBJECT-TYPE
|
|
SYNTAX SnChasFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the fan table."
|
|
INDEX { snChasFanIndex }
|
|
::= { snChasFanTable 1 }
|
|
|
|
SnChasFanEntry ::= SEQUENCE {
|
|
snChasFanIndex
|
|
Integer32,
|
|
snChasFanDescription
|
|
DisplayString,
|
|
snChasFanOperStatus
|
|
INTEGER
|
|
}
|
|
|
|
snChasFanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to fan table."
|
|
::= { snChasFanEntry 1 }
|
|
|
|
snChasFanDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fan description string."
|
|
::= { snChasFanEntry 2 }
|
|
|
|
snChasFanOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
normal(2),
|
|
failure(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fan operation status."
|
|
::= { snChasFanEntry 3 }
|
|
|
|
|
|
-- Stacking Fan Table
|
|
|
|
snChasFan2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnChasFan2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each fan information for each unit. Only installed
|
|
fan appears in a table row."
|
|
::= { snChasFan 2 }
|
|
|
|
snChasFan2Entry OBJECT-TYPE
|
|
SYNTAX SnChasFan2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the fan table."
|
|
INDEX { snChasFan2Unit, snChasFan2Index }
|
|
::= { snChasFan2Table 1 }
|
|
|
|
SnChasFan2Entry ::= SEQUENCE {
|
|
snChasFan2Unit
|
|
Integer32,
|
|
snChasFan2Index
|
|
Integer32,
|
|
snChasFan2Description
|
|
DisplayString,
|
|
snChasFan2OperStatus
|
|
INTEGER
|
|
}
|
|
|
|
snChasFan2Unit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to fan table."
|
|
::= { snChasFan2Entry 1 }
|
|
|
|
snChasFan2Index OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to fan table."
|
|
::= { snChasFan2Entry 2 }
|
|
|
|
snChasFan2Description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fan description string."
|
|
::= { snChasFan2Entry 3 }
|
|
|
|
snChasFan2OperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
normal(2),
|
|
failure(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fan operation status."
|
|
::= { snChasFan2Entry 4 }
|
|
|
|
|
|
-- Stacking Chassis unit Information
|
|
|
|
snChasUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnChasUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of chassis information for each unit. Only active
|
|
chassis appears in a table row."
|
|
::= { snChasUnit 1 }
|
|
|
|
snChasUnitEntry OBJECT-TYPE
|
|
SYNTAX SnChasUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the chassis table."
|
|
INDEX { snChasUnitIndex }
|
|
::= { snChasUnitTable 1 }
|
|
|
|
SnChasUnitEntry ::= SEQUENCE {
|
|
snChasUnitIndex
|
|
Integer32,
|
|
snChasUnitSerNum
|
|
DisplayString,
|
|
snChasUnitNumSlots
|
|
Integer32,
|
|
snChasUnitActualTemperature
|
|
INTEGER,
|
|
snChasUnitWarningTemperature
|
|
INTEGER,
|
|
snChasUnitShutdownTemperature
|
|
INTEGER,
|
|
snChasUnitPartNum
|
|
DisplayString
|
|
}
|
|
|
|
snChasUnitIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to chassis table."
|
|
::= { snChasUnitEntry 1 }
|
|
|
|
snChasUnitSerNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of the chassis for each unit. If the
|
|
serial number is unknown or unavailable then
|
|
the value should be a zero length string."
|
|
::= { snChasUnitEntry 2 }
|
|
|
|
snChasUnitNumSlots OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of slots of the chassis for each unit."
|
|
::= { snChasUnitEntry 3 }
|
|
|
|
|
|
snChasUnitActualTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (-110..250)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of the chassis. Each unit is 0.5 degrees Celcius.
|
|
Only management module built with temperature sensor hardware
|
|
is applicable. For those non-applicable management module, it
|
|
returns no-such-name."
|
|
::= { snChasUnitEntry 4 }
|
|
|
|
|
|
snChasUnitWarningTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (0..250)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual temperature higher than this threshold value will trigger
|
|
the switch to send a temperature warning trap. Each unit is 0.5
|
|
degrees Celcius. Only management module built with temperature
|
|
sensor hardware is applicable. For those non-applicable management
|
|
module, it returns no-such-name."
|
|
::= { snChasUnitEntry 5 }
|
|
|
|
|
|
snChasUnitShutdownTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (0..250)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual temperature higher than this threshold value will shutdown
|
|
a partial of the switch hardware to cool down the system. Each unit
|
|
is 0.5 degrees Celcius. Only management module built with temperature
|
|
sensor hardware is applicable. For those non-applicable management
|
|
module, it returns no-such-name."
|
|
::= { snChasUnitEntry 6 }
|
|
|
|
snChasUnitPartNum OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The part number of the chassis for each unit. If the
|
|
part number is unknown or unavailable then
|
|
the value should be a zero length string."
|
|
::= { snChasUnitEntry 7 }
|
|
|
|
|
|
-- Agent Groups
|
|
|
|
snAgentGbl OBJECT IDENTIFIER ::= { snAgentSys 1 }
|
|
snAgentBrd OBJECT IDENTIFIER ::= { snAgentSys 2 }
|
|
snAgentTrp OBJECT IDENTIFIER ::= { snAgentSys 3 }
|
|
snAgentBoot OBJECT IDENTIFIER ::= { snAgentSys 4 }
|
|
snAgCfgEos OBJECT IDENTIFIER ::= { snAgentSys 5 }
|
|
snAgentLog OBJECT IDENTIFIER ::= { snAgentSys 6 }
|
|
snAgentSysParaConfig OBJECT IDENTIFIER ::= { snAgentSys 7 }
|
|
snAgentConfigModule OBJECT IDENTIFIER ::= { snAgentSys 8 }
|
|
snAgentUser OBJECT IDENTIFIER ::= { snAgentSys 9 }
|
|
snAgentRedundant OBJECT IDENTIFIER ::= { snAgentSys 10 }
|
|
snAgentCpu OBJECT IDENTIFIER ::= { snAgentSys 11 }
|
|
snAgentHw OBJECT IDENTIFIER ::= { snAgentSys 12 }
|
|
snAgentTemp OBJECT IDENTIFIER ::= { snAgentSys 13 }
|
|
snAgentPoe OBJECT IDENTIFIER ::= { snAgentSys 14 }
|
|
snAgentLicense OBJECT IDENTIFIER ::= { snAgentSys 15 }
|
|
brcdSw OBJECT IDENTIFIER ::= { snAgentSys 16 }
|
|
|
|
brcdSwPackageGroup OBJECT IDENTIFIER ::= { brcdSw 1 }
|
|
brcdSwPackageUpgrade OBJECT IDENTIFIER ::= { brcdSwPackageGroup 1 }
|
|
brcdSwIntfModAutoUpgrade OBJECT IDENTIFIER ::= { brcdSwPackageGroup 2 }
|
|
-- SECTION 2: MIB Objects
|
|
|
|
|
|
-- Agent's Global Group
|
|
|
|
snAgReload OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
running(2),
|
|
reset(3),
|
|
busy(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to reboot the agent.
|
|
The following values can only be read:
|
|
other(1).....agent in unknown or other state
|
|
running(2)...agent running
|
|
busy(4).......reload not allowed at this time, flash is busy
|
|
|
|
The following value can be written:
|
|
reset(3).....do a hard reset
|
|
|
|
The agent will return a
|
|
response before the action occurs."
|
|
::= { snAgentGbl 1 }
|
|
|
|
snAgEraseNVRAM OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
error(2),
|
|
erase(3),
|
|
erasing(4),
|
|
busy(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to erase NVRAM of the agent.
|
|
The following values can only be read:
|
|
normal(1)
|
|
error(2)... operation failed or bad flash
|
|
erasing(4)...agent is erasing NVRAM flash
|
|
busy(5).......operation not allowed at this time, flash is busy
|
|
|
|
The following value can be written:
|
|
erase(3).....do erase
|
|
|
|
The agent will return a response even before the erase is done.
|
|
And the read value will be erasing until erase is done.
|
|
And the erase request will be rejected until error or normal."
|
|
::= { snAgentGbl 2 }
|
|
|
|
snAgWriteNVRAM OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
error(2),
|
|
write(3),
|
|
writing(4),
|
|
busy(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to save all configuration info to
|
|
NVRAM of the agent.
|
|
The following values can only be read:
|
|
normal(1)
|
|
error(2)... operation failed or bad flash
|
|
writing(4)...agent is writing NVRAM flash
|
|
busy(5).......operation not allowed at this time, flash is busy
|
|
|
|
The following value can be written:
|
|
write(3).....do write
|
|
|
|
The agent will return a response even before the write is done.
|
|
And the read value will be writing until write is done.
|
|
And the write request will be rejected until error or normal."
|
|
::= { snAgentGbl 3 }
|
|
|
|
snAgConfigFromNVRAM OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
error(2),
|
|
config(3),
|
|
configing(4),
|
|
busy(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is no more supported by FastIron and NetIron agents and
|
|
should not be used.
|
|
Action object to config the switch from NVRAM of the agent.
|
|
The following values can only be read:
|
|
normal(1)
|
|
error(2)... operation failed or bad flash
|
|
configing(4)...configing from NVRAM flash is in process.
|
|
busy(5).......operation not allowed at this time, flash is busy
|
|
The following value can be written:
|
|
config(3).....do config
|
|
|
|
The agent will return a response after config is done."
|
|
::= { snAgentGbl 4 }
|
|
|
|
-- image and config file down/up load
|
|
|
|
-- snAgTftpServerIp object is deprecated, and added following 2 new objects.
|
|
-- 1. "snAgTftpServerAddrType" represents Ipv4 and Ipv6 address types
|
|
-- 2. "snAgTftpServerAddr" reprasents Ipv4 and Ipv6 addresses
|
|
|
|
snAgTftpServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The tftp server address, this will be used for both download/upload
|
|
image file and config file."
|
|
::= { snAgentGbl 5 }
|
|
|
|
snAgImgFname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the image file including path currently associated
|
|
with the system. When the object is not used, the value is a
|
|
zero length string."
|
|
::= { snAgentGbl 6 }
|
|
|
|
|
|
snAgImgLoad OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
flashPrepareReadFailure(2),
|
|
flashReadError(3),
|
|
flashPrepareWriteFailure(4),
|
|
flashWriteError(5),
|
|
tftpTimeoutError(6),
|
|
tftpOutOfBufferSpace(7),
|
|
tftpBusy(8),
|
|
tftpRemoteOtherErrors(9),
|
|
tftpRemoteNoFile(10),
|
|
tftpRemoteBadAccess(11),
|
|
tftpRemoteDiskFull(12),
|
|
tftpRemoteBadOperation(13),
|
|
tftpRemoteBadId(14),
|
|
tftpRemoteFileExists(15),
|
|
tftpRemoteNoUser(16),
|
|
operationError(17),
|
|
loading(18),
|
|
uploadMPPrimary(19),
|
|
downloadMPPrimary(20),
|
|
uploadMPSecondary(21),
|
|
downloadMPSecondary(22),
|
|
tftpWrongFileType(23),
|
|
downloadSPPrimary(24),
|
|
downloadSPSecondary(25),
|
|
uploadMPBootROM(26),
|
|
downloadMPBootROM(27),
|
|
uploadMPBootTFTP(28),
|
|
downloadMPBootTFTP(29),
|
|
uploadMPMonitor(30),
|
|
downloadMPMonitor(31),
|
|
downloadSPBootROM(32)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to down/up load a new image
|
|
to the agent. The following values:
|
|
Error values: from normal(1) to operationError(17) and tftpWrongFileType(23).
|
|
loading(18) .. operation is in process.
|
|
|
|
The following values are used for set :
|
|
uploadMPPrimary(19)..upload the Primary image from MP flash to tftp server.
|
|
downloadMPPrimary(20)..download the Primary image from tftp server to MP flash.
|
|
uploadMPSecondary(21)..upload the Secondary image from MP flash to tftp server.
|
|
downloadMPSecondary(22)..download the Secondary image from tftp server to MP flash.
|
|
downloadSPPrimary(24)..download the Primary image from tftp server to SP flash.
|
|
downloadSPSecondary(25)..download the Secondary image from tftp server to SP flash.
|
|
uploadMPBootROM(26)..upload the Boot from flash image from MP flash to tftp server.
|
|
downloadMPBootROM(27)..download the Boot from flash image from tftp server to MP flash.
|
|
uploadMPBootTFTP(28)..upload the Boot from TFTP image from MP flash to tftp server.
|
|
downloadMPBootTFTP(29)..download the Boot from TFTP image from tftp server to MP flash.
|
|
uploadMPMonitor(30)..upload the Monitor image from MP flash to tftp server.
|
|
downloadMPMonitor(31)..download the Monitor image from tftp server to MP flash.
|
|
downloadSPBootROM(32)..download the Boot image from tftp server to SP flash.
|
|
|
|
MP is the management processor, SP is the switch processor.
|
|
|
|
The image filename is defined in
|
|
snAgImgFname. The tftp server address is defined in snAgTftpServerIp.
|
|
Atomic set of snAgImgLoad, snAgImgFname and
|
|
snAgTftpServerIp is required to allow down/up load to happen.
|
|
And the write request will be rejected during loading until error
|
|
or normal."
|
|
::= { snAgentGbl 7 }
|
|
|
|
snAgCfgFname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the config file(s) including path currently associated
|
|
with the system. Some agents in special
|
|
situations may support a value which contains
|
|
multiple file names instead of a single file
|
|
name. Multiple names are specified as a list
|
|
of file names separated by semicolons (;).
|
|
When the object is not used, the value is a
|
|
zero length string."
|
|
::= { snAgentGbl 8 }
|
|
|
|
snAgCfgLoad OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
flashPrepareReadFailure(2),
|
|
flashReadError(3),
|
|
flashPrepareWriteFailure(4),
|
|
flashWriteError(5),
|
|
tftpTimeoutError(6),
|
|
tftpOutOfBufferSpace(7),
|
|
tftpBusy(8),
|
|
tftpRemoteOtherErrors(9),
|
|
tftpRemoteNoFile(10),
|
|
tftpRemoteBadAccess(11),
|
|
tftpRemoteDiskFull(12),
|
|
tftpRemoteBadOperation(13),
|
|
tftpRemoteBadId(14),
|
|
tftpRemoteFileExists(15),
|
|
tftpRemoteNoUser(16),
|
|
operationError(17),
|
|
loading(18),
|
|
uploadFromFlashToServer(20),
|
|
downloadToFlashFromServer(21),
|
|
uploadFromDramToServer(22),
|
|
downloadToDramFromServer(23),
|
|
uploadFromFlashToNMS(24),
|
|
downloadToFlashFromNMS(25),
|
|
uploadFromDramToNMS(26),
|
|
downloadToDramFromNMS(27),
|
|
operationDoneWithNMS(28),
|
|
tftpWrongFileType(29),
|
|
downloadToDramFromServerOverwrite(30)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to down/up load a config image
|
|
to the agent. The following values can be
|
|
read :
|
|
Error values: from normal(1) to operationError(17) and tftpWrongFileType(29).
|
|
loading(18) .. operation is in process.
|
|
|
|
|
|
The following value can be used to set:
|
|
uploadFromFlashToServer(20)..upload the config from flash
|
|
to tftp server.
|
|
downloadToFlashFromServer(21)..download the config to flash
|
|
from tftp server.
|
|
uploadFromDramToServer(22)..upload the config from DRAM
|
|
to tftp server.
|
|
downloadToDramFromServer(23)..download the config to DRAM
|
|
from tftp server.
|
|
downloadToDramFromServerOverwrite(30)..download the config to DRAM
|
|
from tftp server, clear the running-config,
|
|
and overwrite with the new config.
|
|
|
|
The following value can be used to set:
|
|
uploadFromFlashToNMS(24)..upload the config from flash to NMS.
|
|
downloadToFlashFromNMS(25)..download the config to flash from NMS.
|
|
uploadFromDramToNMS(26)..upload the config from DRAM to NMS.
|
|
downloadToDramFromNMS(27)..download the config to DRAM from NMS.
|
|
|
|
The config filename is defined in
|
|
snAgCfgFname. The tftp server address is defined in snAgTftpServerIp.
|
|
Atomic set of snAgCfgLoad, snAgCfgFname and snAgTftpServerIp is
|
|
required to allow down/up load to happen. And the write request
|
|
will be rejected during loading until error or normal.
|
|
For those NMS commands from (24) to (27), The snAgCfgEosTable MIB must
|
|
be sent along in one PDU. A seperate write memory cli or set
|
|
snAgWriteNVRAM is required to save the config to NVRAM."
|
|
::= { snAgentGbl 9 }
|
|
|
|
-- default gateway ip address
|
|
|
|
snAgDefGwayIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway (router) address."
|
|
::= { snAgentGbl 10 }
|
|
|
|
|
|
-- image version
|
|
|
|
snAgImgVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the running software in the form
|
|
'major.minor.maintenance[letters]'."
|
|
::= { snAgentGbl 11 }
|
|
|
|
snAgFlashImgVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the software image saved in local
|
|
storage such as flash memory in the form
|
|
'major.minor.maintenance[letters]'. If not
|
|
known or not available, then the value is
|
|
a zero length string."
|
|
::= { snAgentGbl 12 }
|
|
|
|
snAgGblIfIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface ip address."
|
|
::= { snAgentGbl 13 }
|
|
|
|
snAgGblIfIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface ip address mask."
|
|
::= { snAgentGbl 14 }
|
|
|
|
snAgGblPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..97))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System Security Access Password and this is only
|
|
allowed to use for setting but not for reading.
|
|
An SNMP-Get will get an null string.
|
|
By default, this object needs to be in the same PDU while
|
|
doing Set operation some critical SNMP objects.
|
|
If command 'no snmp-server pw-check' is configured on
|
|
the device, then this object is not needed in the PDU.
|
|
The value of this object depends on the authentication
|
|
method configured for SNMP.
|
|
If there's no AAA authentication configuration for SNMP,
|
|
this object will have the enable superuser password.
|
|
If the AAA authentication for SNMP is configured and has
|
|
leading method as enable or line, this object will have
|
|
the corresponding enable or line password.
|
|
If the switch has AAA authentication for SNMP operation,
|
|
and the method specified is one of local, TACACS+, or RADIUS,
|
|
this object will have format '<username> <password>'
|
|
(note one space character in between).
|
|
The max size allows concatenation of max 48 octets of
|
|
username and 48 octets of password, with one blank character"
|
|
::= { snAgentGbl 15 }
|
|
|
|
snAgTrpRcvrCurEntry OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current total entries of the Trap
|
|
Receiver Table are created."
|
|
::= { snAgentGbl 16 }
|
|
|
|
snAgGblDataRetrieveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nextbootCfg(0),
|
|
operationalData(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By default, this mode is set to nextbootCfg(0).
|
|
The VLAN Table and Port-STP Table data will be retrieved
|
|
according to this mode.
|
|
nextbootCfg(0).........the nextboot configuration data are retrieved
|
|
operationalData(1)..........the current running data are retrieved"
|
|
::= { snAgentGbl 19 }
|
|
|
|
|
|
snAgSystemLog OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(5))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system log object to indicate whether any Network
|
|
Management Station(NMS) has login. The first byte
|
|
of the octet string is the value decribed below and
|
|
followed by 4 bytes of secret code.
|
|
login(1)..... a value for a NMS to login.
|
|
heartbeat(2)... a value for the login NMS periodically to
|
|
checkin; Otherwise, the Agent will automatically
|
|
set this object to logout(3) after a timeout
|
|
period.
|
|
logout(3).... a value for a NMS to logout.
|
|
changePassword(4).... a value for the login NMS to change
|
|
password, only if snAgGblPasswordChangeMode
|
|
was configured to 'anyMgmtEntity'.
|
|
changeReadOnlyCommunity(5).... a value for the login NMS
|
|
to change the read-only community string,
|
|
only if snAgGblPasswordChangeMode was
|
|
configured to 'anyMgmtEntity'.
|
|
changeReadWriteCommunity(6).... a value for the login NMS
|
|
to change the read-write community string,
|
|
only if snAgGblPasswordChangeMode was
|
|
configured to 'anyMgmtEntity'."
|
|
::= { snAgentGbl 20 }
|
|
|
|
|
|
snAgGblEnableColdStartTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate cold start traps."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 21 }
|
|
|
|
|
|
snAgGblEnableLinkUpTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate link up traps."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 22 }
|
|
|
|
|
|
snAgGblEnableLinkDownTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate link down traps."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 23 }
|
|
|
|
snAgGblPasswordChangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
anyMgmtEntity(1),
|
|
consoleAndTelnet(2),
|
|
consoleOnly(3),
|
|
telnetOnly(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify which management entity is allowed to change
|
|
the password. 'anyMgmtEntity' management entities are
|
|
SNMP management station, console command line interface,
|
|
and telnet command line interface. For security reason,
|
|
this object can only be modified by console command line
|
|
interface or telnet command line interface. The default
|
|
value is 'consoleAndTelnet', of which both console and
|
|
telnet command line interfaces are allowed to change
|
|
the password."
|
|
::= { snAgentGbl 24 }
|
|
|
|
snAgGblReadOnlyCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP read community string and this is only allowed
|
|
to use for setting but not for reading. An SNMP-Get
|
|
will get an zero length string.
|
|
Set operation on this object is allowed only if command
|
|
'password-change any' is configured on the target device."
|
|
::= { snAgentGbl 25 }
|
|
|
|
snAgGblReadWriteCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP read-write community string and this is only
|
|
allowed to use for setting but not for reading. An
|
|
SNMP-Get will get an zero length string.
|
|
Set operation on this object is allowed only if command
|
|
'password-change any' is configured on the target device."
|
|
::= { snAgentGbl 26 }
|
|
|
|
snAgGblCurrentSecurityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represnts the current log-in security level.
|
|
Each level of security requires a password to permit
|
|
user for different system configurations."
|
|
::= { snAgentGbl 27 }
|
|
|
|
snAgGblSecurityLevelSet OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This shows which the security level password to be set."
|
|
::= { snAgentGbl 28 }
|
|
|
|
snAgGblLevelPasswordsMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This shows the bitmap of level passwords which successfully assigned to the system."
|
|
::= { snAgentGbl 29 }
|
|
|
|
snAgGblQueueOverflow OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"false - The device queues are not overflow.
|
|
true - The device queues are overflow."
|
|
::= { snAgentGbl 30 }
|
|
|
|
snAgGblBufferShortage OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"false - The device buffers are adequate.
|
|
true - The device buffers are in shortage."
|
|
::= { snAgentGbl 31 }
|
|
|
|
snAgGblDmaFailure OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"false - The device DMAs are in good condition.
|
|
true - One of the DMAs in the device fails."
|
|
::= { snAgentGbl 32 }
|
|
|
|
snAgGblResourceLowWarning OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"false - No, the device does not have resource-low-warning.
|
|
true - Yes, the device does have resource-low-warning."
|
|
::= { snAgentGbl 33 }
|
|
|
|
snAgGblExcessiveErrorWarning OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"false - No, the device does not have any excessive collision, FCS errors, alignment warning etc.
|
|
true - Yes, the device does have."
|
|
::= { snAgentGbl 34 }
|
|
|
|
snAgGblCpuUtilData OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of utilization of the CPU in the device.
|
|
In NetIron and FastIron platforms, reading this object resets all the counters.
|
|
Therefore, a user need not set snAgGblUtilCollect."
|
|
::= { snAgentGbl 35 }
|
|
|
|
snAgGblCpuUtilCollect OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"enable(1) - The beginning of statistics collection of utilization of the CPU in the device.
|
|
disable(0) - The end of statistics collection of utilization of the CPU in the device.
|
|
This object is deprecated. User need not set this object. User can read snAgGblCpuUtilData to reset all the counters. "
|
|
::= { snAgentGbl 36 }
|
|
|
|
snAgGblTelnetTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telnet session idling timeout value. Each value unit is one minute.
|
|
FastIron and NetIron platforms support value upto 240 minutes.
|
|
On these platforms, value 0 means telnet sessions do not timeout."
|
|
::= { snAgentGbl 37 }
|
|
|
|
snAgGblEnableWebMgmt OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable web management."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 38 }
|
|
|
|
snAgGblSecurityLevelBinding OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represnts the binding of a given password to which
|
|
security level. A value of 255 indicates an invalid
|
|
binding."
|
|
::= { snAgentGbl 39 }
|
|
|
|
snAgGblEnableSLB OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable Server Load Balancing."
|
|
::= { snAgentGbl 40 }
|
|
|
|
snAgSoftwareFeature OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit string representing the software feature of the running
|
|
switch/router image. These features were conditional compiled
|
|
to different product images. For each bit, exist feature has
|
|
a value of 1, but non-exist feature has a value of 0.
|
|
octet 0, bit 0 - RMON
|
|
octet 0, bit 1 - ipx switching
|
|
octet 0, bit 2 - server load balancing
|
|
octet 0, bit 3 - layer 3 filter in switch
|
|
octet 0, bit 4 - ipx routing
|
|
octet 0, bit 5 - appletalk routing
|
|
octet 0, bit 6 - ip multicast routing
|
|
octet 0, bit 7 - local access control
|
|
octet 1, bit 0 - BGP routing
|
|
octet 1, bit 1 - loopback interface
|
|
octet 1, bit 2 - BigIron multi-management module
|
|
octet 1, bit 3 - BigIron SYSIF II
|
|
octet 1, bit 4 - BigIron POS support
|
|
octet 1, bit 5 - appletalk cable vlan
|
|
octet 1, bit 6 - 64 subnet
|
|
octet 1, bit 7 - multi-slot trunk
|
|
octet 2, bit 0 - TACACS
|
|
octet 2, bit 1 - Gigabit Ethernet port auto-negotiation mode
|
|
octet 2, bit 2 - FSRP
|
|
octet 2, bit 3 - Exodus requested OSPF enhancement
|
|
octet 2, bit 4 - OSPF NSSA
|
|
octet 2, bit 5 - POS
|
|
octet 2, bit 6 - QOS
|
|
octet 2, bit 7 - Single Span
|
|
octet 3, bit 0 - Fast Span
|
|
octet 3, bit 1 - Base L3
|
|
octet 3, bit 2 - static log buffer
|
|
octet 3, bit 3 - L2 POS
|
|
octet 3, bit 4 - BI15K
|
|
octet 3, bit 5 - L2 ATM
|
|
octet 3, bit 6 - ATM
|
|
octet 3, bit 7 - NETFLOW
|
|
octet 4, bit 0 - SFLOW
|
|
octet 4, bit 1 - GVRP
|
|
octet 4, bit 2 - GARP
|
|
octet 4, bit 3 - dynamic trunk
|
|
octet 4, bit 4 - IGC 8G
|
|
octet 4, bit 5 - rate limit
|
|
octet 4, bit 6 - IPC rate limit
|
|
octet 4, bit 7 - MPLS
|
|
octet 5, bit 0 - ISIS
|
|
octet 5, bit 1 - link aggregation
|
|
octet 5, bit 2 - port dual mode
|
|
octet 5, bit 3 - private vlan
|
|
octet 5, bit 4 - MBGP
|
|
octet 5, bit 5 - ipv6 protocol vlan
|
|
octet 5, bit 6 - X10G
|
|
octet 5, bit 7 - fastiron edge switch/router (gridiron)
|
|
octet 6, bit 0 - FDP
|
|
octet 6, bit 1 - port tag type
|
|
octet 6, bit 2 - wireless capable
|
|
octet 6, bit 3 - snSwPortVlanId object has changed from read-only to read-write
|
|
octet 6, bit 4 - LLDP
|
|
Bit 0 is the least significant bit of an octet, and
|
|
bit 7 is the most significant bit of an octet."
|
|
::= { snAgentGbl 41 }
|
|
|
|
snAgGblEnableModuleInsertedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is permitted to
|
|
generate hardware module inserted to chassis traps."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 42 }
|
|
|
|
snAgGblEnableModuleRemovedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is permitted to
|
|
generate hardware module removed from chassis traps."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 43 }
|
|
|
|
snAgGblTrapMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A generic trap message string."
|
|
::= { snAgentGbl 44 }
|
|
|
|
snAgGblEnableTelnetServer OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable telnet server in device."
|
|
DEFVAL { enabled }
|
|
::= { snAgentGbl 45 }
|
|
|
|
snAgGblTelnetPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..48))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telnet Access Password and this is only
|
|
useful for write operation. A read operation
|
|
get a null string.
|
|
Set operation on this object is allowed only if command
|
|
'password-change any' is configured on the target device.
|
|
Another configuration affecting this is
|
|
'no snmp-server pw-check'. If its configured on the device,
|
|
there's no need to pass another varbind snAgGblPassword.
|
|
By default, 'snmp-server pw-check' is true, and thus needs
|
|
to have snAgGblPassword along with this object.
|
|
in the same Set PDU."
|
|
::= { snAgentGbl 46 }
|
|
|
|
snAgBuildDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date of the built software."
|
|
::= { snAgentGbl 47 }
|
|
|
|
snAgBuildtime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of the built software."
|
|
::= { snAgentGbl 48 }
|
|
|
|
snAgBuildVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The image label of the built software"
|
|
::= { snAgentGbl 49 }
|
|
|
|
snAgGblCpuUtil1SecAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of 1 second CPU utilization."
|
|
::= { snAgentGbl 50 }
|
|
|
|
snAgGblCpuUtil5SecAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of 5 second CPU utilization."
|
|
::= { snAgentGbl 51 }
|
|
|
|
snAgGblCpuUtil1MinAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of 1 minute CPU utilization."
|
|
::= { snAgentGbl 52 }
|
|
|
|
snAgGblDynMemUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system dynamic memory utilization, in unit of percentage.
|
|
Deprecated: Refer to snAgSystemDRAMUtil.
|
|
For NI platforms, refer to snAgentBrdMemoryUtil100thPercent"
|
|
::= { snAgentGbl 53 }
|
|
|
|
snAgGblDynMemTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total amount of system dynamic memory, in number of bytes.
|
|
Deprecated: Refer to snAgSystemDRAMTotal.
|
|
For NI platforms, refer to snAgentBrdMemoryTotal"
|
|
::= { snAgentGbl 54 }
|
|
|
|
snAgGblDynMemFree OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The free amount of system dynamic memory, in number of bytes.
|
|
Deprecated: Refer to snAgSystemDRAMFree.
|
|
For NI platforms, refer to snAgentBrdMemoryAvailable"
|
|
::= { snAgentGbl 55 }
|
|
|
|
snAgImgLoadSPModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
vm1(2),
|
|
pos12(3),
|
|
pos48(4),
|
|
atm(5),
|
|
gignpa(6),
|
|
lp(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch processor module type of which that receives
|
|
the downloaded image."
|
|
::= { snAgentGbl 56 }
|
|
|
|
snAgImgLoadSPModuleNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot numner of a switch processor module that receives
|
|
the downloaded image. Setting value 0 applies to all SP
|
|
modules."
|
|
::= { snAgentGbl 57 }
|
|
|
|
snAgTrapHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in seconds for which traps will be witheld
|
|
during system initialization."
|
|
::= { snAgentGbl 58 }
|
|
|
|
snAgSFlowSourceInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use the ifIndex value here to specify the
|
|
source interface to be used for sFlow packets.
|
|
The interface should have IP address configured
|
|
on it. Value of 0 indicates that source interface
|
|
has not been configured for sFlow. Port 65534
|
|
is used to specify a null port."
|
|
::= { snAgentGbl 59 }
|
|
|
|
snAgGblTelnetLoginTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telnet session login timeout value in minutes.
|
|
FastIron and NetIron platforms support value upto 10 minutes, and default of 1 minute."
|
|
::= { snAgentGbl 60 }
|
|
|
|
snAgGblBannerExec OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXEC process creation banner. Insert newlines using '\n' within the string."
|
|
::= { snAgentGbl 61 }
|
|
|
|
snAgGblBannerIncoming OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Incoming terminal line banner. Insert newlines using '\n' within the string."
|
|
::= { snAgentGbl 62 }
|
|
|
|
snAgGblBannerMotd OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Message-of-the-day banner. Insert newlines using '\n' within the string."
|
|
::= { snAgentGbl 63 }
|
|
|
|
snAgWebMgmtServerTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP port number of web management interface."
|
|
::= { snAgentGbl 64 }
|
|
|
|
-- image and config file down/up load
|
|
|
|
snAgTftpServerAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2)"
|
|
DEFVAL { ipv4 }
|
|
::= { snAgentGbl 65 }
|
|
|
|
snAgTftpServerAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TFTP server IP address."
|
|
::= { snAgentGbl 66 }
|
|
|
|
snAgGblDeleteFirstBeforeDownload OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to true deletes the existing target file on the
|
|
Management module flash. This object can be set to true only
|
|
when the snAgImgLoad is set to downloadMPPrimary(20),
|
|
downloadMPSecondary(22), downloadSPPrimary(24),
|
|
downloadSPSecondary(25) or downloadMPMonitor(31) in the same
|
|
SNMP set request PDU.
|
|
|
|
This object is reset to false after successful or unsuccessful
|
|
download of specified file to flash.
|
|
|
|
Reading this object returns false(2)."
|
|
::= { snAgentGbl 67 }
|
|
|
|
|
|
-- Agent Board Table
|
|
|
|
|
|
snAgentBrdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentBrdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each physical board information."
|
|
::= { snAgentBrd 1 }
|
|
|
|
snAgentBrdEntry OBJECT-TYPE
|
|
SYNTAX SnAgentBrdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Agent Board table."
|
|
INDEX { snAgentBrdIndex }
|
|
::= { snAgentBrdTable 1 }
|
|
|
|
SnAgentBrdEntry ::= SEQUENCE {
|
|
snAgentBrdIndex
|
|
Integer32,
|
|
snAgentBrdMainBrdDescription
|
|
DisplayString,
|
|
snAgentBrdMainBrdId
|
|
OCTET STRING,
|
|
snAgentBrdMainPortTotal
|
|
Integer32,
|
|
snAgentBrdExpBrdDescription
|
|
DisplayString,
|
|
snAgentBrdExpBrdId
|
|
OCTET STRING,
|
|
snAgentBrdExpPortTotal
|
|
INTEGER,
|
|
snAgentBrdStatusLeds
|
|
Integer32,
|
|
snAgentBrdTrafficLeds
|
|
Integer32,
|
|
snAgentBrdMediaLeds
|
|
Integer32,
|
|
snAgentBrdSpeedLeds
|
|
Integer32,
|
|
snAgentBrdModuleStatus
|
|
INTEGER,
|
|
snAgentBrdRedundantStatus
|
|
INTEGER,
|
|
snAgentBrdAlarmLeds
|
|
Integer32,
|
|
snAgentBrdTxTrafficLeds
|
|
Integer32,
|
|
snAgentBrdRxTrafficLeds
|
|
Integer32,
|
|
snAgentBrdStatusLedString
|
|
OCTET STRING,
|
|
snAgentBrdTrafficLedString
|
|
OCTET STRING,
|
|
snAgentBrdMediaLedString
|
|
OCTET STRING,
|
|
snAgentBrdSpeedLedString
|
|
OCTET STRING,
|
|
snAgentBrdAlarmLedString
|
|
OCTET STRING,
|
|
snAgentBrdTxTrafficLedString
|
|
OCTET STRING,
|
|
snAgentBrdRxTrafficLedString
|
|
OCTET STRING,
|
|
snAgentBrdMemoryTotal
|
|
CounterBasedGauge64,
|
|
snAgentBrdMemoryAvailable
|
|
CounterBasedGauge64,
|
|
snAgentBrdSerialNumber
|
|
DisplayString,
|
|
snAgentBrdPartNumber
|
|
DisplayString,
|
|
snAgentBrdMemoryUtil100thPercent
|
|
Unsigned32
|
|
}
|
|
|
|
snAgentBrdIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent Interface Table."
|
|
::= { snAgentBrdEntry 1 }
|
|
|
|
snAgentBrdMainBrdDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board description string."
|
|
::= { snAgentBrdEntry 2 }
|
|
|
|
snAgentBrdMainBrdId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board identifier, which can uniquely identify a board
|
|
type. It is an encoded octet string with the following meaning:
|
|
octet 0 - octet string format version, which identifies the
|
|
format of this string.
|
|
If format version octet has the value 2, the octets after the
|
|
version octet have the following meaning:
|
|
octet 1 - product type:
|
|
BI_WG 0x57
|
|
BI_BB 0x42
|
|
BI_NI 0x4E
|
|
BI_NI2 0x32
|
|
NI_M4 0x4D
|
|
BI_SLB 0x53
|
|
octet 2 - module type:
|
|
MASTER_FIBER_8G 0x0
|
|
MASTER_FIBER_4G 0x1
|
|
MASTER_COPPER_16 0x2
|
|
SLAVE_FIBER_4G 0x3
|
|
FI_MASTER_FIBER_2G 0x4
|
|
FI_MASTER_FIBER_4G 0x5
|
|
MASTER_COPPER_8G 0x6
|
|
FI_MASTER_FIBER_8G 0x7
|
|
SLAVE_FIBER_8G 0x8
|
|
MASTER_COPPER_12_2 0x9
|
|
SLAVE_COPPER_24 0xA
|
|
FI_SLAVE_COPPER_24 0xB
|
|
SLAVE_100FX_8 0xD
|
|
SLAVE_100FX_16 0xC
|
|
SLAVE_COPPER_8G 0xE
|
|
SLAVE_COPPER_16_2 0xF
|
|
STACK_FIBER_8G 0x10
|
|
STACK_COPPER_8G 0x11
|
|
MASTER_FIBER_2G 0x12
|
|
SLAVE_100FX_24 0x13
|
|
MASTER_FIBER_0G 0x14
|
|
POS_622M 0x15
|
|
POS_155M 0x16
|
|
SLAVE_FIBER_2G 0x17
|
|
SLAVE_COPPER_2G 0x18
|
|
FI_SLAVE_FIBER_2G 0x19
|
|
FI_SLAVE_FIBER_4G 0x1A
|
|
FI_SLAVE_FIBER_8G 0x1B
|
|
FI_SLAVE_COPPER_8G 0x1C
|
|
FI_MASTER_COPPER_8G 0x1D
|
|
POS_155M2P 0x1E
|
|
FI_MASTER_COPPER_4G 0x1F
|
|
FI_MASTER_COPPER_2G 0x20
|
|
MASTER_COPPER_4G 0x21
|
|
MASTER_COPPER_2G 0x22
|
|
MASTER_M4_8G 0x23
|
|
MASTER_M4_4G 0x24
|
|
MASTER_M4_2G 0x25
|
|
MASTER_M4_0G 0x26
|
|
MASTER_M5_0G 0x27
|
|
POS_2488M 0x28
|
|
SLAVE_M5_0G 0x29
|
|
POS_N2488M 0x2A
|
|
STACK_IPC_48_2 0x2B
|
|
SLAVE_NPA_FIBER_4G 0x2C
|
|
ATM_2PORT 0x2D
|
|
ATM_4PORT 0x2E
|
|
SLAVE_FIBER_10G 0x2F
|
|
STACK_FES_48_2 0x30
|
|
STACK_FES_24_2 0x31
|
|
STACK_FES_96_4 0x32
|
|
STACK_FES_12G 0x33
|
|
STACK_FESX_24G 0x34
|
|
STACK_FESX_24_2_G 0x35
|
|
STACK_FESX_24_1_G 0x36
|
|
STACK_FESX_48G 0x37
|
|
STACK_FESX_48_2_G 0x38
|
|
STACK_FESX_48_1_G 0x39
|
|
SUPERX_FI_MGMT 0x40
|
|
SUPERX_FI_2P10G 0x41
|
|
SUPERX_FI_24GC 0x42
|
|
SUPERX_FI_24GF 0x43
|
|
SUPERX_FI_2P10G_WAN 0x44
|
|
SUPERX_FI_MGMT_II 0x4a
|
|
SLAVE_JC_48E 0xC3
|
|
SLAVE_JC_48T 0xC4
|
|
MASTER_JC_M4_8G 0xC5
|
|
SLAVE_JC_8G 0xC6
|
|
SLAVE_JC_B16GF 0xC8
|
|
MASTER_JC_B2404 0xC9
|
|
SLAVE_JC_B16GC 0xCA
|
|
SLAVE_JC_B24FX 0xCE
|
|
octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6,
|
|
PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81
|
|
octet 4 to
|
|
octet 5 - processor speed in MHz
|
|
octet 6 - MAC type:
|
|
MAC_NONE=0
|
|
MAC_SEEQ_10_100=1,
|
|
MAC_DEC_10_100=2,
|
|
MAC_3COM_10_100=3,
|
|
MAC_X10GMAC_10000=4,
|
|
MAC_SEEQ_1000=5,
|
|
MAC_GMAC_1000=6,
|
|
MAC_VLSI_1000=7
|
|
octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2,
|
|
PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6,
|
|
PHY_BROADCOM_10_100=7, PHY_LEVEL24=8,
|
|
PHY_BROADCOM_10000=9 (for 10G),
|
|
PHY_3COM_10_100=9 (for others)
|
|
octet 8 - port type, COPPER=0, FIBER=1
|
|
octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1,
|
|
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4,
|
|
LHB_FIBER=5
|
|
octet 10 to
|
|
octet 13 - DRAM size in KBytes
|
|
octet 14 to
|
|
octet 17 - boot flash size in KBytes
|
|
octet 18 to
|
|
octet 21 - code flash size in KBytes
|
|
octet 22 to
|
|
octet 27 - serial number.
|
|
octet 28 - chassis backplane type.
|
|
chassis4000 = 0x00
|
|
chassis8000 = 0x02
|
|
chassis15000 = 0x01
|
|
chassisFISX = 0x04
|
|
Turbo8 = 0x07 (stack2)
|
|
FastIron2 = 0x06 (stack1)"
|
|
::= { snAgentBrdEntry 3 }
|
|
|
|
|
|
snAgentBrdMainPortTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ports for the main board."
|
|
::= { snAgentBrdEntry 4 }
|
|
|
|
|
|
snAgentBrdExpBrdDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expansion board description string. Expansion
|
|
board are those boards attaching on the main board."
|
|
::= { snAgentBrdEntry 5 }
|
|
|
|
|
|
snAgentBrdExpBrdId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expansion board identifier. Expansion board are those
|
|
boards attaching on the main board. It is an encoded octet
|
|
string with the following meaning:
|
|
octet 0 - octet string format version, which identifies
|
|
the format of this string.
|
|
If format version octet has the value 1, the octets after
|
|
the version octet have the following meaning:
|
|
octet 1 - expansion board type, HUNDRED_MEG_1PORT=1,
|
|
HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3,
|
|
HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5,
|
|
GIGA_1PORT=8, GIGA_2PORT=9
|
|
octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1,
|
|
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5"
|
|
::= { snAgentBrdEntry 6 }
|
|
|
|
|
|
snAgentBrdExpPortTotal OBJECT-TYPE
|
|
SYNTAX INTEGER (0..24)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ports for the expansion board."
|
|
::= { snAgentBrdEntry 7 }
|
|
|
|
|
|
snAgentBrdStatusLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel status LEDs. This is a bit-map;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The maximum number of ports in one chassis
|
|
is 32 that means 32 Ports Status LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (Link off)
|
|
1 on (Link on)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdStatusLedString)"
|
|
::= { snAgentBrdEntry 8 }
|
|
|
|
|
|
snAgentBrdTrafficLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel traffic LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The maximum number of ports in one chassis
|
|
is 24 that means 24 Ports Traffic LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no traffic)
|
|
1 on (traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdTrafficLedString)"
|
|
::= { snAgentBrdEntry 9 }
|
|
|
|
|
|
snAgentBrdMediaLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The maximum number of ports in one chassis is 24
|
|
that means 24 Ports Media LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 half duplex
|
|
1 full duplex
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdMediaLedString)"
|
|
::= { snAgentBrdEntry 10 }
|
|
|
|
|
|
|
|
snAgentBrdSpeedLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The maximum number of ports in one chassis is 24
|
|
that means 24 Ports Speed LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 10 MBit
|
|
1 100 MBit
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdSpeedLedString)"
|
|
::= { snAgentBrdEntry 11 }
|
|
|
|
snAgentBrdModuleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
moduleEmpty(0),
|
|
moduleGoingDown(2),
|
|
moduleRejected(3),
|
|
moduleBad(4),
|
|
moduleConfigured(8),
|
|
moduleComingUp(9),
|
|
moduleRunning(10),
|
|
moduleBlocked(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By default, this mode is set to notActivated(0).
|
|
moduleEmpty(0) ......... The slot of the chassis is empty.
|
|
moduleGoingDown(2) ..... The module is going down.
|
|
moduleRejected(3) ...... The module is being rejected due to wrong configuration.
|
|
moduleBad(4) ........... The module Hardware is bad.
|
|
moduleConfigured(8) ...... The module is configured (stacking)
|
|
moduleComingUp(9) ...... The module is in power-up cycle.
|
|
moduleRunning(10) ....... The module is running.
|
|
moduleBlocked(11) ....... The module is blocked, for full height card."
|
|
::= { snAgentBrdEntry 12 }
|
|
|
|
snAgentBrdRedundantStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
active(2),
|
|
standby(3),
|
|
crashed(4),
|
|
comingUp(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundant status of a module. Non-management module always
|
|
returns other(1). Management module returns the rest of the
|
|
states."
|
|
::= { snAgentBrdEntry 13 }
|
|
|
|
snAgentBrdAlarmLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs (for POS Module Only). This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The maximum number of ports in one chassis is 24
|
|
that means 24 Ports Speed LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 no alarm
|
|
1 alarm
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdAlarmLedString)"
|
|
::= { snAgentBrdEntry 14 }
|
|
|
|
|
|
snAgentBrdTxTrafficLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The maximum number of ports in one chassis
|
|
is 24 that means 24 Ports Transmit Traffic LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no transmit traffic)
|
|
1 on (transmit traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdTxTrafficLedString)"
|
|
::= { snAgentBrdEntry 15 }
|
|
|
|
snAgentBrdRxTrafficLeds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel receive traffic LEDs (for POS Module Only). This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The maximum number of ports in one chassis
|
|
is 24 that means 24 Ports Receive Traffic LEDs. The expansion port
|
|
number always begins from the last main port number.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no receive traffic)
|
|
1 on (receive traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
(It was obsoleted after release 07100, replaced by snAgentBrdRxTrafficLedString)"
|
|
::= { snAgentBrdEntry 16 }
|
|
|
|
snAgentBrdStatusLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel status LEDs. This is a bit-map;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The following shows the meaning of each
|
|
bit for each switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (Link off)
|
|
1 on (Link on)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
--------"
|
|
::= { snAgentBrdEntry 17 }
|
|
|
|
snAgentBrdTrafficLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel traffic LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch
|
|
port. The following shows the meaning of each
|
|
bit for each switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no traffic)
|
|
1 on (traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
--------"
|
|
::= { snAgentBrdEntry 18 }
|
|
|
|
snAgentBrdMediaLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 half duplex
|
|
1 full duplex
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
---------"
|
|
::= { snAgentBrdEntry 19 }
|
|
|
|
snAgentBrdSpeedLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs. This is a packed bit string;
|
|
each LED is encoded into 1 bit for each switch port.
|
|
The following shows the meaning of each bit for each
|
|
switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 10 MBit
|
|
1 100 MBit
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
---------"
|
|
::= { snAgentBrdEntry 20 }
|
|
|
|
snAgentBrdAlarmLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel media LEDs (for POS Module Only).
|
|
This is a packed bit string; each LED is encoded
|
|
into 1 bit for each switch port. The following
|
|
shows the meaning of each bit for each switch port:
|
|
|
|
bit value meaning
|
|
--------- -------
|
|
0 no alarm
|
|
1 alarm
|
|
|
|
The bitmap of LEDs are as following:
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
---------"
|
|
::= { snAgentBrdEntry 21 }
|
|
|
|
snAgentBrdTxTrafficLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel transmit traffic LEDs (for POS Module Only).
|
|
This is a packed bit string; each LED is encoded into
|
|
1 bit for each switch port. The following shows the
|
|
meaning of each bit for each switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no transmit traffic)
|
|
1 on (transmit traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
--------"
|
|
::= { snAgentBrdEntry 22 }
|
|
|
|
snAgentBrdRxTrafficLedString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit array that contains the value of the
|
|
front panel receive traffic LEDs (for POS Module Only).
|
|
This is a packed bit string; each LED is encoded into
|
|
1 bit for each switch port. The following shows the
|
|
meaning of each bit for each switch port:
|
|
|
|
bit value meaning
|
|
-------- ---------
|
|
0 off (no receive traffic)
|
|
1 on (receive traffic)
|
|
|
|
The bitmap of LEDs are as following:
|
|
|
|
(Port1) (Port4) (Port8)
|
|
Bit (Bit0) (Bit3) (Bit7)
|
|
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
|
|
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
|
|
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
|
|
--------"
|
|
::= { snAgentBrdEntry 23 }
|
|
|
|
snAgentBrdMemoryTotal OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total memory in bytes within this module."
|
|
::= { snAgentBrdEntry 24 }
|
|
|
|
snAgentBrdMemoryAvailable OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total memory in bytes available for use within this module."
|
|
::= { snAgentBrdEntry 25 }
|
|
|
|
snAgentBrdSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Board Serial number. Zero length string indicates that
|
|
module serial number has not been programmed within
|
|
EEPROM or the module does not support serial number within EEPROM."
|
|
::= { snAgentBrdEntry 26 }
|
|
|
|
snAgentBrdPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Board Part number. Zero length string indicates that
|
|
module part number has not been programmed within
|
|
EEPROM or the module does not support part number within EEPROM."
|
|
::= { snAgentBrdEntry 27 }
|
|
|
|
snAgentBrdMemoryUtil100thPercent OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dynamic memory utilization within this module in units
|
|
of one-hundredth of a percent. "
|
|
::= { snAgentBrdEntry 28 }
|
|
|
|
|
|
|
|
-- Agent Stacking Board Table
|
|
|
|
|
|
snAgentBrd2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentBrd2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each physical board information for each unit."
|
|
::= { snAgentBrd 2 }
|
|
|
|
snAgentBrd2Entry OBJECT-TYPE
|
|
SYNTAX SnAgentBrd2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Agent Board table."
|
|
INDEX { snAgentBrd2Unit, snAgentBrd2Slot }
|
|
::= { snAgentBrd2Table 1 }
|
|
|
|
SnAgentBrd2Entry ::= SEQUENCE {
|
|
snAgentBrd2Unit
|
|
Integer32,
|
|
snAgentBrd2Slot
|
|
Integer32,
|
|
snAgentBrd2MainBrdDescription
|
|
DisplayString,
|
|
snAgentBrd2MainBrdId
|
|
OCTET STRING,
|
|
snAgentBrd2MainPortTotal
|
|
Integer32,
|
|
snAgentBrd2ModuleStatus
|
|
INTEGER,
|
|
snAgentBrd2RedundantStatus
|
|
INTEGER
|
|
}
|
|
|
|
snAgentBrd2Unit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent module Table."
|
|
::= { snAgentBrd2Entry 1 }
|
|
|
|
snAgentBrd2Slot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent module Table."
|
|
::= { snAgentBrd2Entry 2 }
|
|
|
|
snAgentBrd2MainBrdDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board description string."
|
|
::= { snAgentBrd2Entry 3}
|
|
|
|
snAgentBrd2MainBrdId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board identifier, which can uniquely identify a board
|
|
type. It is an encoded octet string with the following meaning:
|
|
octet 0 - octet string format version, which identifies the
|
|
format of this string.
|
|
If format version octet has the value 2, the octets after the
|
|
version octet have the following meaning:
|
|
octet 1 - product type:
|
|
BI_WG 0x57
|
|
BI_BB 0x42
|
|
BI_NI 0x4E
|
|
BI_NI2 0x32
|
|
NI_M4 0x4D
|
|
BI_SLB 0x53
|
|
octet 2 - module type:
|
|
MASTER_FIBER_8G 0x0
|
|
MASTER_FIBER_4G 0x1
|
|
MASTER_COPPER_16 0x2
|
|
SLAVE_FIBER_4G 0x3
|
|
FI_MASTER_FIBER_2G 0x4
|
|
FI_MASTER_FIBER_4G 0x5
|
|
MASTER_COPPER_8G 0x6
|
|
FI_MASTER_FIBER_8G 0x7
|
|
SLAVE_FIBER_8G 0x8
|
|
MASTER_COPPER_12_2 0x9
|
|
SLAVE_COPPER_24 0xA
|
|
FI_SLAVE_COPPER_24 0xB
|
|
SLAVE_100FX_8 0xD
|
|
SLAVE_100FX_16 0xC
|
|
SLAVE_COPPER_8G 0xE
|
|
SLAVE_COPPER_16_2 0xF
|
|
STACK_FIBER_8G 0x10
|
|
STACK_COPPER_8G 0x11
|
|
MASTER_FIBER_2G 0x12
|
|
SLAVE_100FX_24 0x13
|
|
MASTER_FIBER_0G 0x14
|
|
POS_622M 0x15
|
|
POS_155M 0x16
|
|
SLAVE_FIBER_2G 0x17
|
|
SLAVE_COPPER_2G 0x18
|
|
FI_SLAVE_FIBER_2G 0x19
|
|
FI_SLAVE_FIBER_4G 0x1A
|
|
FI_SLAVE_FIBER_8G 0x1B
|
|
FI_SLAVE_COPPER_8G 0x1C
|
|
FI_MASTER_COPPER_8G 0x1D
|
|
POS_155M2P 0x1E
|
|
FI_MASTER_COPPER_4G 0x1F
|
|
FI_MASTER_COPPER_2G 0x20
|
|
MASTER_COPPER_4G 0x21
|
|
MASTER_COPPER_2G 0x22
|
|
MASTER_M4_8G 0x23
|
|
MASTER_M4_4G 0x24
|
|
MASTER_M4_2G 0x25
|
|
MASTER_M4_0G 0x26
|
|
MASTER_M5_0G 0x27
|
|
POS_2488M 0x28
|
|
SLAVE_M5_0G 0x29
|
|
POS_N2488M 0x2A
|
|
STACK_IPC_48_2 0x2B
|
|
SLAVE_NPA_FIBER_4G 0x2C
|
|
ATM_2PORT 0x2D
|
|
ATM_4PORT 0x2E
|
|
SLAVE_FIBER_10G 0x2F
|
|
STACK_FES_48_2 0x30
|
|
STACK_FES_24_2 0x31
|
|
STACK_FES_96_4 0x32
|
|
STACK_FES_12G 0x33
|
|
STACK_FESX_24G 0x34
|
|
STACK_FESX_24_2_G 0x35
|
|
STACK_FESX_24_1_G 0x36
|
|
STACK_FESX_48G 0x37
|
|
STACK_FESX_48_2_G 0x38
|
|
STACK_FESX_48_1_G 0x39
|
|
SUPERX_FI_MGMT 0x40
|
|
SUPERX_FI_2P10G 0x41
|
|
SUPERX_FI_24GC 0x42
|
|
SUPERX_FI_24GF 0x43
|
|
SUPERX_FI_2P10G_WAN 0x44
|
|
SUPERX_FI_MGMT_II 0x4a
|
|
SLAVE_JC_48E 0xC3
|
|
SLAVE_JC_48T 0xC4
|
|
MASTER_JC_M4_8G 0xC5
|
|
SLAVE_JC_8G 0xC6
|
|
SLAVE_JC_B16GF 0xC8
|
|
MASTER_JC_B2404 0xC9
|
|
SLAVE_JC_B16GC 0xCA
|
|
octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6,
|
|
PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81
|
|
octet 4 to
|
|
octet 5 - processor speed in MHz
|
|
octet 6 - MAC type:
|
|
MAC_NONE=0
|
|
MAC_SEEQ_10_100=1,
|
|
MAC_DEC_10_100=2,
|
|
MAC_3COM_10_100=3,
|
|
MAC_X10GMAC_10000=4,
|
|
MAC_SEEQ_1000=5,
|
|
MAC_GMAC_1000=6,
|
|
MAC_VLSI_1000=7
|
|
octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2,
|
|
PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6,
|
|
PHY_BROADCOM_10_100=7, PHY_LEVEL24=8,
|
|
PHY_BROADCOM_10000=9 (for 10G),
|
|
PHY_3COM_10_100=9 (for others)
|
|
octet 8 - port type, COPPER=0, FIBER=1
|
|
octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1,
|
|
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4,
|
|
LHB_FIBER=5
|
|
octet 10 to
|
|
octet 13 - DRAM size in KBytes
|
|
octet 14 to
|
|
octet 17 - boot flash size in KBytes
|
|
octet 18 to
|
|
octet 21 - code flash size in KBytes
|
|
octet 22 to
|
|
octet 27 - serial number.
|
|
octet 28 - chassis backplane type.
|
|
chassis4000 = 0x00
|
|
chassis8000 = 0x02
|
|
chassis15000 = 0x01
|
|
chassisFISX = 0x04
|
|
Turbo8 = 0x07 (stack2)
|
|
FastIron2 = 0x06 (stack1)"
|
|
::= { snAgentBrd2Entry 4 }
|
|
|
|
|
|
snAgentBrd2MainPortTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ports for the main board."
|
|
::= { snAgentBrd2Entry 5 }
|
|
|
|
snAgentBrd2ModuleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
moduleEmpty(0),
|
|
moduleGoingDown(2),
|
|
moduleRejected(3),
|
|
moduleBad(4),
|
|
moduleConfigured(8),
|
|
moduleComingUp(9),
|
|
moduleRunning(10),
|
|
moduleBlocked(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By default, this mode is set to notActivated(0).
|
|
moduleEmpty(0) ......... The slot of the chassis is empty.
|
|
moduleGoingDown(2) ..... The module is going down.
|
|
moduleRejected(3) ...... The module is being rejected due to wrong configuration.
|
|
moduleBad(4) ........... The module Hardware is bad.
|
|
moduleConfigured(8) ...... The module is configured (stacking)
|
|
moduleComingUp(9) ...... The module is in power-up cycle.
|
|
moduleRunning(10) ....... The module is running.
|
|
moduleBlocked(11) ....... The module is blocked, for full height card."
|
|
::= { snAgentBrd2Entry 6 }
|
|
|
|
snAgentBrd2RedundantStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
active(2),
|
|
standby(3),
|
|
crashed(4),
|
|
comingUp(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundant status of a module. Non-management module always
|
|
returns other(1). Management module returns the rest of the
|
|
states."
|
|
::= { snAgentBrd2Entry 7}
|
|
|
|
-- Trap Receiver Table
|
|
|
|
|
|
-- Trap Receiver Table
|
|
-- snAgTrpRcvrTable is deprecated, replaced by fdryTrapReceiverTable.
|
|
-- The new table "fdryTrapReceiverTable" combines Ipv4 and Ipv6 configuration of
|
|
-- trap Receiver/managers which to send traps.
|
|
|
|
snAgTrpRcvrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgTrpRcvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of managers which to send traps."
|
|
::= { snAgentTrp 1 }
|
|
|
|
snAgTrpRcvrEntry OBJECT-TYPE
|
|
SYNTAX SnAgTrpRcvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A row in the trap receiver table.
|
|
The column snAgTrpRcvrStatus is used to create
|
|
and delete rows in the table. Creation requires
|
|
a SET PDU with objects snAgTrpRcvrIndex,
|
|
snAgTrpRcvrIpAddr, snAgTrpRcvrComm and
|
|
snAgTrpRcvrStatus."
|
|
INDEX { snAgTrpRcvrIndex }
|
|
::= { snAgTrpRcvrTable 1 }
|
|
|
|
SnAgTrpRcvrEntry ::= SEQUENCE {
|
|
snAgTrpRcvrIndex
|
|
Integer32,
|
|
snAgTrpRcvrIpAddr
|
|
IpAddress,
|
|
snAgTrpRcvrCommunityOrSecurityName
|
|
OCTET STRING,
|
|
snAgTrpRcvrStatus
|
|
INTEGER,
|
|
snAgTrpRcvrUDPPort
|
|
INTEGER,
|
|
snAgTrpRcvrSecurityModel
|
|
INTEGER,
|
|
snAgTrpRcvrSecurityLevel
|
|
INTEGER
|
|
}
|
|
|
|
snAgTrpRcvrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The index to the Trap Receiver Table."
|
|
::= { snAgTrpRcvrEntry 1 }
|
|
|
|
snAgTrpRcvrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ip address for
|
|
SNMP manager that is to receive the trap."
|
|
::= { snAgTrpRcvrEntry 2 }
|
|
|
|
snAgTrpRcvrCommunityOrSecurityName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Community string to use. In case of USM (SNMPv3) security model,
|
|
this object is used to provide the security name."
|
|
::= { snAgTrpRcvrEntry 3 }
|
|
|
|
|
|
snAgTrpRcvrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
ignore(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete rows in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
ignore(5)...don't use this entry to
|
|
send traps to at this time
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(5) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid
|
|
ignore(5)...don't use this entry to
|
|
send traps to at this time"
|
|
::= { snAgTrpRcvrEntry 4 }
|
|
|
|
snAgTrpRcvrUDPPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"UDP port number of the trap receiver."
|
|
DEFVAL { 162 }
|
|
::= { snAgTrpRcvrEntry 5 }
|
|
|
|
snAgTrpRcvrSecurityModel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v1(1),
|
|
v2c(2),
|
|
usm(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Version of trap format to be used."
|
|
DEFVAL { 1 }
|
|
::= { snAgTrpRcvrEntry 6 }
|
|
|
|
snAgTrpRcvrSecurityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuth(1),
|
|
auth(2),
|
|
authPriv(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Used for USM (SNMPv3) security model to specify the level of security.
|
|
The security name is provided by snAgTrpRcvrCommunityOrSecurityName."
|
|
DEFVAL { 1 }
|
|
::= { snAgTrpRcvrEntry 7 }
|
|
|
|
|
|
-- Boot Sequence Table
|
|
|
|
|
|
snAgBootSeqTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgBootSeqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of image load sequnce instructions to the boot code.
|
|
Boot code will start from instruction of the first valid entry
|
|
to load the image. If failed, it will use the second valid
|
|
entry and so on, until a succesful load has completed. Each
|
|
entry must have an unique instruction, duplicate instructions
|
|
will be rejected."
|
|
::= { snAgentBoot 1 }
|
|
|
|
snAgBootSeqEntry OBJECT-TYPE
|
|
SYNTAX SnAgBootSeqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the boot sequence table."
|
|
INDEX { snAgBootSeqIndex }
|
|
::= { snAgBootSeqTable 1 }
|
|
|
|
SnAgBootSeqEntry ::= SEQUENCE {
|
|
snAgBootSeqIndex
|
|
INTEGER,
|
|
snAgBootSeqInstruction
|
|
INTEGER,
|
|
snAgBootSeqIpAddr
|
|
IpAddress,
|
|
snAgBootSeqFilename
|
|
DisplayString,
|
|
snAgBootSeqRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snAgBootSeqIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the boot sequence table."
|
|
::= { snAgBootSeqEntry 1 }
|
|
|
|
snAgBootSeqInstruction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fromPrimaryFlash(1),
|
|
fromSecondaryFlash(2),
|
|
fromTftpServer(3),
|
|
fromBootpServer(4),
|
|
fromPcmciaCard1(5),
|
|
fromPcmciaCard2(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instruction for the boot code."
|
|
::= { snAgBootSeqEntry 2 }
|
|
|
|
snAgBootSeqIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ip address of the TFTP server if snAgBootSeqInstruction
|
|
was set to 'fromTftpServer'; otherwise, this object is not
|
|
used in any other boot instruction."
|
|
::= { snAgBootSeqEntry 3 }
|
|
|
|
snAgBootSeqFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The image filename on the TFTP server if snAgBootSeqInstruction
|
|
was set to 'fromTftpServer'; otherwise, this object is not
|
|
used in any other boot instruction."
|
|
::= { snAgBootSeqEntry 4 }
|
|
|
|
snAgBootSeqRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a boot sequence table entry."
|
|
::= { snAgBootSeqEntry 5 }
|
|
|
|
|
|
-- SP Boot Sequence Table
|
|
|
|
snAgSpBootSeqTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgSpBootSeqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of image load sequnce instructions to the boot code for
|
|
the slave (line) modules. Boot code will start from instruction of
|
|
the first valid entry to load the image. If failed, it will use
|
|
the second valid entry and so on, until a succesful load has
|
|
completed. Each entry must have an unique instruction, duplicate
|
|
instructions will be rejected."
|
|
::= { snAgentBoot 2 }
|
|
|
|
snAgSpBootSeqEntry OBJECT-TYPE
|
|
SYNTAX SnAgSpBootSeqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the slave module boot sequence table."
|
|
INDEX { snAgSpBootSeqSpNumber, snAgSpBootSeqIndex }
|
|
::= { snAgSpBootSeqTable 1 }
|
|
|
|
SnAgSpBootSeqEntry ::= SEQUENCE {
|
|
snAgSpBootSeqSpNumber
|
|
INTEGER,
|
|
snAgSpBootSeqIndex
|
|
Integer32,
|
|
snAgSpBootSeqInstruction
|
|
INTEGER,
|
|
snAgSpBootSeqIpAddr
|
|
IpAddress,
|
|
snAgSpBootSeqFilename
|
|
DisplayString,
|
|
snAgSpBootSeqRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snAgSpBootSeqSpNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot numner of a slave/witch processor module for which
|
|
this boot sequence applies. Setting value 0 applies to all SP
|
|
modules. Index 0 is valid only for setting to simplify the set
|
|
operation for all the modules."
|
|
::= { snAgSpBootSeqEntry 1 }
|
|
|
|
snAgSpBootSeqIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the boot sequence table."
|
|
::= { snAgSpBootSeqEntry 2 }
|
|
|
|
snAgSpBootSeqInstruction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fromSpPrimaryFlash(1),
|
|
fromSpSecondaryFlash(2),
|
|
fromMpPrimaryFlash(3),
|
|
fromMpSecondaryFlash(4),
|
|
fromPcmciaCard1(5),
|
|
fromPcmciaCard2(6),
|
|
fromTftpServer(7),
|
|
interactively(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instruction for the boot code."
|
|
::= { snAgSpBootSeqEntry 3 }
|
|
|
|
snAgSpBootSeqIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ip address of the TFTP server if snAgBootSeqInstruction
|
|
was set to 'fromTftpServer'; otherwise, this object is not
|
|
used in any other boot instruction."
|
|
::= { snAgSpBootSeqEntry 4 }
|
|
|
|
snAgSpBootSeqFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The image filename on the TFTP server if snAgBootSeqInstruction
|
|
was set to 'fromTftpServer'; otherwise, this object is not
|
|
used in any other boot instruction."
|
|
::= { snAgSpBootSeqEntry 5 }
|
|
|
|
snAgSpBootSeqRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
delete(2),
|
|
create(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a boot sequence table entry."
|
|
::= { snAgSpBootSeqEntry 6 }
|
|
|
|
--- Encoded Octet Strings for the Configuration File Transfer
|
|
|
|
|
|
snAgCfgEosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgCfgEosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the fragmented Configuration File data packet
|
|
with checksum include in each rows of this table. A SNMP-SET
|
|
represents configuration file download, and a SNMP-GET represents
|
|
configuration file upload. This action is only if the SNMP-SET of
|
|
snAgCfgLoad command is sent along with this table consecutively. The
|
|
applicable snAgCfgLoad command value is as followings:
|
|
uploadFromFlashToNMS(23),
|
|
downloadToFlashFromNMS(24),
|
|
uploadFromDramToNMS(25),
|
|
downloadToDramFromNMS(26)."
|
|
::= { snAgCfgEos 1 }
|
|
|
|
|
|
snAgCfgEosEntry OBJECT-TYPE
|
|
SYNTAX SnAgCfgEosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An EOS row in the table of encoded octet strings for table
|
|
snAgCfgEosTable. "
|
|
INDEX { snAgCfgEosIndex }
|
|
::= { snAgCfgEosTable 1 }
|
|
|
|
|
|
|
|
SnAgCfgEosEntry ::=
|
|
SEQUENCE {
|
|
snAgCfgEosIndex
|
|
Integer32,
|
|
snAgCfgEosPacket
|
|
OCTET STRING,
|
|
snAgCfgEosChkSum
|
|
Integer32
|
|
}
|
|
|
|
|
|
snAgCfgEosIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each VLAN EOS Buffer Identifier have a multiple
|
|
VLAN table entries."
|
|
::= { snAgCfgEosEntry 1 }
|
|
|
|
snAgCfgEosPacket OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1000))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An encoded octet string. On reads it contains an integral
|
|
number of configuration file data packets. The size
|
|
of each encoded octet string is less than or equal to 1400
|
|
bytes."
|
|
::= { snAgCfgEosEntry 2 }
|
|
|
|
|
|
snAgCfgEosChkSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A checksum of each configuration file data packet."
|
|
::= { snAgCfgEosEntry 3 }
|
|
|
|
|
|
-- Stackable Management Group
|
|
|
|
snStackGen OBJECT IDENTIFIER ::= { snStack 1 }
|
|
snStackSecSwitchInfo OBJECT IDENTIFIER ::= { snStack 2 }
|
|
|
|
-- MIB Objects
|
|
|
|
|
|
-- General Stackable Management Information
|
|
|
|
snStackPriSwitchMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stackable Management Primary Switch mode
|
|
either enabled or disabled and the default is
|
|
disabled mode.
|
|
enabled(1)...........primary switch enabled
|
|
disabled(0)..........primary switch disabled"
|
|
::= { snStackGen 1 }
|
|
|
|
snStackMaxSecSwitch OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maximum Secondary Switches are allowed in the
|
|
Stackable Management Group."
|
|
::= { snStackGen 2 }
|
|
|
|
snStackTotalSecSwitch OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Total Secondary Switches currently connected to the
|
|
Stackable Management Group."
|
|
::= { snStackGen 3 }
|
|
|
|
snStackSyncAllSecSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
invalid(1),
|
|
device(2),
|
|
global(3),
|
|
local(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synchronize all the secondary switches in the
|
|
Stackable Management Group with the following commands.
|
|
device(2)...........device related parameters.
|
|
global(3)...........global parameters.
|
|
local(4)............local parameters.
|
|
The return result of the above commands are either
|
|
normal(0)...........normal condition.
|
|
invalid(1)...........invalid result."
|
|
::= { snStackGen 4 }
|
|
|
|
snStackSmSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Slot 0 is the Master slot and Slot 1-8 are slaves.
|
|
All the slot-based MIB data can be retrieved with respect to
|
|
this slot index such as snChassis global MIB. "
|
|
::= { snStackGen 5 }
|
|
|
|
snStackFmpSetProcess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
pending(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state.
|
|
pending(1) - The pending process is waiting for the result of an FMP-SET.
|
|
failure(2) - The failure result of an FMP-SET."
|
|
::= { snStackGen 6 }
|
|
|
|
|
|
|
|
|
|
-- Stackable Management Secondary Switch Information Table
|
|
|
|
|
|
snStackSecSwitchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnStackSecSwitchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If snSwGroupOperMode is configured as basic mode
|
|
which is VLAN by Port, Layer2 switching,
|
|
then this table is valid. Each VLAN switch port
|
|
could have a number of VLAN IDs."
|
|
::= { snStackSecSwitchInfo 1 }
|
|
|
|
|
|
snStackSecSwitchEntry OBJECT-TYPE
|
|
SYNTAX SnStackSecSwitchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Stackable Management Secondary Switch
|
|
Information table."
|
|
INDEX {
|
|
snStackSecSwitchIndex
|
|
}
|
|
::= { snStackSecSwitchTable 1 }
|
|
|
|
|
|
SnStackSecSwitchEntry ::= SEQUENCE {
|
|
snStackSecSwitchIndex
|
|
INTEGER,
|
|
snStackSecSwitchSlotId
|
|
INTEGER,
|
|
snStackSecSwitchPortCnts
|
|
INTEGER,
|
|
snStackSecSwitchEnabled
|
|
INTEGER,
|
|
snStackSecSwitchAck
|
|
INTEGER,
|
|
snStackSecSwitchMacAddr
|
|
MacAddress,
|
|
snStackSecSwitchSyncCmd
|
|
INTEGER,
|
|
snStackSecSwitchIpAddr
|
|
IpAddress,
|
|
snStackSecSwitchSubnetMask
|
|
IpAddress,
|
|
snStackSecSwitchCfgCmd
|
|
INTEGER
|
|
}
|
|
|
|
snStackSecSwitchIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..26)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch index must not be greater than the snStackMaxSecSwitch."
|
|
::= { snStackSecSwitchEntry 1 }
|
|
|
|
|
|
snStackSecSwitchSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..26)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch slot ID must be set before the Configuration
|
|
command sent from the primary switch to the secondary switch
|
|
either manually or automatically - snStackSecSwitchCfgCmd."
|
|
::= { snStackSecSwitchEntry 2 }
|
|
|
|
snStackSecSwitchPortCnts OBJECT-TYPE
|
|
SYNTAX INTEGER (1..26)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports in this secondary switch."
|
|
::= { snStackSecSwitchEntry 3 }
|
|
|
|
snStackSecSwitchEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch has been selected to Stackable Management Group."
|
|
::= { snStackSecSwitchEntry 4 }
|
|
|
|
snStackSecSwitchAck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch has sent reponse to the primary switch."
|
|
::= { snStackSecSwitchEntry 5 }
|
|
|
|
snStackSecSwitchMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch physical address. The physical address
|
|
represents a MAC Station."
|
|
::= { snStackSecSwitchEntry 6 }
|
|
|
|
snStackSecSwitchSyncCmd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
invalid(1),
|
|
device(2),
|
|
global(3),
|
|
local(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synchronize the secondary switches in the
|
|
Stackable Management Group with the following commands.
|
|
device(2)...........device related parameters.
|
|
global(3)...........global parameters.
|
|
local(4)............local parameters.
|
|
The return result of the above commands are either
|
|
normal(0)...........normal condition.
|
|
invalid(1)...........invalid result."
|
|
::= { snStackSecSwitchEntry 7 }
|
|
|
|
snStackSecSwitchIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch IP Address and is used for
|
|
manual-command of snStackSecSwitchCfgCmd."
|
|
::= { snStackSecSwitchEntry 8 }
|
|
|
|
snStackSecSwitchSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary switch IP Subnet Mask and is used for
|
|
manual-command of snStackSecSwitchCfgCmd."
|
|
::= { snStackSecSwitchEntry 9 }
|
|
|
|
snStackSecSwitchCfgCmd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
invalid(1),
|
|
auto(2),
|
|
manual(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"snStackSecSwitchSlotId must be set before the Configuration
|
|
command sent from the primary switch to the secondary switch
|
|
either manually or automatically.
|
|
auto(2)...........auto-configuration command sent.
|
|
manual(3).........manual-configuration command sent.
|
|
if manual-mode is used, snStackSecSwitchIpAddr
|
|
and snStackSecSwitchSubnetMask must be
|
|
first set before this command is sent.
|
|
The return result of the above commands are either
|
|
normal(0)...........normal condition.
|
|
invalid(1)..........invalid result."
|
|
::= { snStackSecSwitchEntry 10 }
|
|
|
|
-- System Logging Group
|
|
|
|
snAgSysLogGbl OBJECT IDENTIFIER ::= { snAgentLog 1 }
|
|
|
|
snAgSysLogGblEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable system logging."
|
|
DEFVAL { enabled }
|
|
::= { snAgSysLogGbl 1 }
|
|
|
|
snAgSysLogGblBufferSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of dynamic system logging entries."
|
|
DEFVAL { 50 }
|
|
::= { snAgSysLogGbl 2 }
|
|
|
|
snAgSysLogGblClear OBJECT-TYPE
|
|
SYNTAX INTEGER { normal(0), clearAll(1), clearDynamic(2), clearStatic(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear dynamic and/or static system logging buffers."
|
|
::= { snAgSysLogGbl 3 }
|
|
|
|
snAgSysLogGblCriticalLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filter events going to the logging buffer. This is a packed
|
|
bit string object of which each bit has the following meaning:
|
|
(bit 0 is the least significant bit).
|
|
|
|
bit position meaning
|
|
------------ -------
|
|
8-31 reserved
|
|
7 Warning (warning conditions)
|
|
6 Notification (normal but significant conditions)
|
|
5 Informational (informational messages)
|
|
4 Error (error conditions)
|
|
3 Emergency (system is unusable)
|
|
2 Debugging (debugging messages)
|
|
1 Critical (critical conditions)
|
|
0 Alert (immediate action needed)
|
|
|
|
Setting a critical level bit to 1 makes the logging buffer
|
|
accept the corresponding event. Resetting a critical level
|
|
bit to 0 makes the logging buffer reject the corresponding
|
|
event."
|
|
DEFVAL { 255 }
|
|
::= { snAgSysLogGbl 4 }
|
|
|
|
snAgSysLogGblLoggedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number events logged in the system logging buffer."
|
|
::= { snAgSysLogGbl 5 }
|
|
|
|
snAgSysLogGblDroppedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of events dropped."
|
|
::= { snAgSysLogGbl 6 }
|
|
|
|
snAgSysLogGblFlushedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the system logging buffer was cleared."
|
|
::= { snAgSysLogGbl 7 }
|
|
|
|
snAgSysLogGblOverrunCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the system logging buffer was wrapped
|
|
around."
|
|
::= { snAgSysLogGbl 8 }
|
|
|
|
snAgSysLogGblServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"IP address of syslog server."
|
|
::= { snAgSysLogGbl 9 }
|
|
|
|
snAgSysLogGblFacility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
kern(1),
|
|
user(2),
|
|
mail(3),
|
|
daemon(4),
|
|
auth(5),
|
|
syslog(6),
|
|
lpr(7),
|
|
news(8),
|
|
uucp(9),
|
|
sys9(10),
|
|
sys10(11),
|
|
sys11(12),
|
|
sys12(13),
|
|
sys13(14),
|
|
sys14(15),
|
|
cron(16),
|
|
local0(17),
|
|
local1(18),
|
|
local2(19),
|
|
local3(20),
|
|
local4(21),
|
|
local5(22),
|
|
local6(23),
|
|
local7(24)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility code."
|
|
DEFVAL { user }
|
|
::= { snAgSysLogGbl 10 }
|
|
|
|
snAgSysLogGblPersistenceEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable system logging persistence."
|
|
DEFVAL { enabled }
|
|
::= { snAgSysLogGbl 11 }
|
|
|
|
-- Dynamic System Logging Buffer Table
|
|
|
|
snAgSysLogBufferTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgSysLogBufferEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic system logging buffer table."
|
|
::= { snAgentLog 2 }
|
|
|
|
snAgSysLogBufferEntry OBJECT-TYPE
|
|
SYNTAX SnAgSysLogBufferEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the dynamic system logging buffer table."
|
|
INDEX { snAgSysLogBufferIndex }
|
|
::= { snAgSysLogBufferTable 1 }
|
|
|
|
SnAgSysLogBufferEntry ::= SEQUENCE {
|
|
snAgSysLogBufferIndex
|
|
Integer32,
|
|
snAgSysLogBufferTimeStamp
|
|
TimeTicks,
|
|
snAgSysLogBufferCriticalLevel
|
|
INTEGER,
|
|
snAgSysLogBufferMessage
|
|
DisplayString,
|
|
snAgSysLogBufferCalTimeStamp
|
|
DisplayString
|
|
}
|
|
|
|
snAgSysLogBufferIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the dynamic system logging buffer table."
|
|
::= { snAgSysLogBufferEntry 1 }
|
|
|
|
snAgSysLogBufferTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A time stamp when the event is logged."
|
|
::= { snAgSysLogBufferEntry 2 }
|
|
|
|
snAgSysLogBufferCriticalLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
alert(2),
|
|
critical(3),
|
|
debugging(4),
|
|
emergency(5),
|
|
error(6),
|
|
informational(7),
|
|
notification(8),
|
|
warning(9) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The critical level of this event."
|
|
::= { snAgSysLogBufferEntry 3 }
|
|
|
|
snAgSysLogBufferMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system logging message."
|
|
::= { snAgSysLogBufferEntry 4 }
|
|
|
|
snAgSysLogBufferCalTimeStamp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A time stamp when the event is logged. This object returns
|
|
a NULL terminated time stamp string if the system calendar
|
|
time was set. It returns a zero length string if the system
|
|
calendar time was not set."
|
|
::= { snAgSysLogBufferEntry 5 }
|
|
|
|
|
|
-- Static System Logging Buffer Table
|
|
|
|
snAgStaticSysLogBufferTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgStaticSysLogBufferEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static system logging buffer table."
|
|
::= { snAgentLog 3 }
|
|
|
|
snAgStaticSysLogBufferEntry OBJECT-TYPE
|
|
SYNTAX SnAgStaticSysLogBufferEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static system logging buffer table."
|
|
INDEX { snAgStaticSysLogBufferIndex }
|
|
::= { snAgStaticSysLogBufferTable 1 }
|
|
|
|
SnAgStaticSysLogBufferEntry ::= SEQUENCE {
|
|
snAgStaticSysLogBufferIndex
|
|
INTEGER,
|
|
snAgStaticSysLogBufferTimeStamp
|
|
TimeTicks,
|
|
snAgStaticSysLogBufferCriticalLevel
|
|
INTEGER,
|
|
snAgStaticSysLogBufferMessage
|
|
DisplayString,
|
|
snAgStaticSysLogBufferCalTimeStamp
|
|
DisplayString
|
|
}
|
|
|
|
snAgStaticSysLogBufferIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the static system logging buffer table."
|
|
::= { snAgStaticSysLogBufferEntry 1 }
|
|
|
|
snAgStaticSysLogBufferTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A time stamp when the event is logged."
|
|
::= { snAgStaticSysLogBufferEntry 2 }
|
|
|
|
snAgStaticSysLogBufferCriticalLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
alert(2),
|
|
critical(3),
|
|
debugging(4),
|
|
emergency(5),
|
|
error(6),
|
|
informational(7),
|
|
notification(8),
|
|
warning(9) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The critical level of this event."
|
|
::= { snAgStaticSysLogBufferEntry 3 }
|
|
|
|
snAgStaticSysLogBufferMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system logging message."
|
|
::= { snAgStaticSysLogBufferEntry 4 }
|
|
|
|
snAgStaticSysLogBufferCalTimeStamp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A time stamp when the event is logged. This object returns
|
|
a NULL terminated time stamp string if the system calendar
|
|
time was set. It returns a zero length string if the system
|
|
calendar time was not set."
|
|
::= { snAgStaticSysLogBufferEntry 5 }
|
|
|
|
-- SysLog Server Table
|
|
|
|
snAgSysLogServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgSysLogServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System Log Server table."
|
|
::= { snAgentLog 4 }
|
|
|
|
snAgSysLogServerEntry OBJECT-TYPE
|
|
SYNTAX SnAgSysLogServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the SysLog Server table."
|
|
INDEX {snAgSysLogServerIP, snAgSysLogServerUDPPort}
|
|
::= { snAgSysLogServerTable 1 }
|
|
|
|
SnAgSysLogServerEntry ::= SEQUENCE {
|
|
snAgSysLogServerIP
|
|
IpAddress,
|
|
snAgSysLogServerUDPPort
|
|
INTEGER,
|
|
snAgSysLogServerRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snAgSysLogServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of syslog server."
|
|
::= { snAgSysLogServerEntry 1 }
|
|
|
|
snAgSysLogServerUDPPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"UDP port number of syslog server."
|
|
::= { snAgSysLogServerEntry 2 }
|
|
|
|
snAgSysLogServerRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snAgSysLogServerEntry 3 }
|
|
|
|
-- Agent System Parameters Configuration Table
|
|
|
|
|
|
snAgentSysParaConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentSysParaConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Agent of each board."
|
|
::= { snAgentSysParaConfig 1 }
|
|
|
|
snAgentSysParaConfigEntry OBJECT-TYPE
|
|
SYNTAX SnAgentSysParaConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Agent System Parameters Configuation table."
|
|
INDEX { snAgentSysParaConfigIndex }
|
|
::= { snAgentSysParaConfigTable 1 }
|
|
|
|
SnAgentSysParaConfigEntry ::= SEQUENCE {
|
|
snAgentSysParaConfigIndex
|
|
Integer32,
|
|
snAgentSysParaConfigDescription
|
|
DisplayString,
|
|
snAgentSysParaConfigMin
|
|
Integer32,
|
|
snAgentSysParaConfigMax
|
|
Integer32,
|
|
snAgentSysParaConfigDefault
|
|
Integer32,
|
|
snAgentSysParaConfigCurrent
|
|
Integer32
|
|
}
|
|
|
|
snAgentSysParaConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent System Parameters Configuation Table."
|
|
::= { snAgentSysParaConfigEntry 1 }
|
|
|
|
snAgentSysParaConfigDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main board description string."
|
|
::= { snAgentSysParaConfigEntry 2 }
|
|
|
|
snAgentSysParaConfigMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value of this Agent System Parameter."
|
|
::= { snAgentSysParaConfigEntry 3 }
|
|
|
|
snAgentSysParaConfigMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of this Agent System Parameter."
|
|
::= { snAgentSysParaConfigEntry 4 }
|
|
|
|
snAgentSysParaConfigDefault OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value of this Agent System Parameter."
|
|
::= { snAgentSysParaConfigEntry 5 }
|
|
|
|
snAgentSysParaConfigCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current configurated value of this Agent System Parameter."
|
|
::= { snAgentSysParaConfigEntry 6 }
|
|
|
|
|
|
-- Agent Configured Module Table
|
|
|
|
|
|
snAgentConfigModuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentConfigModuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each configured module information."
|
|
::= { snAgentConfigModule 1 }
|
|
|
|
snAgentConfigModuleEntry OBJECT-TYPE
|
|
SYNTAX SnAgentConfigModuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Agent Configured Module table."
|
|
INDEX { snAgentConfigModuleIndex }
|
|
::= { snAgentConfigModuleTable 1 }
|
|
|
|
SnAgentConfigModuleEntry ::= SEQUENCE {
|
|
snAgentConfigModuleIndex
|
|
Integer32,
|
|
snAgentConfigModuleType
|
|
INTEGER,
|
|
snAgentConfigModuleRowStatus
|
|
INTEGER,
|
|
snAgentConfigModuleDescription
|
|
DisplayString,
|
|
snAgentConfigModuleOperStatus
|
|
DisplayString,
|
|
snAgentConfigModuleSerialNumber
|
|
DisplayString,
|
|
snAgentConfigModuleNumberOfPorts
|
|
Integer32,
|
|
snAgentConfigModuleMgmtModuleType
|
|
INTEGER,
|
|
snAgentConfigModuleNumberOfCpus
|
|
Integer32
|
|
}
|
|
|
|
snAgentConfigModuleIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent Configured Module Table."
|
|
::= { snAgentConfigModuleEntry 1 }
|
|
|
|
snAgentConfigModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bi8PortGigManagementModule(0),
|
|
bi4PortGigManagementModule(1),
|
|
bi16PortCopperManagementModule(2),
|
|
bi4PortGigModule(3),
|
|
fi2PortGigManagementModule(4),
|
|
fi4PortGigManagementModule(5),
|
|
bi8PortGigCopperManagementModule(6),
|
|
fi8PortGigManagementModule(7),
|
|
bi8PortGigModule(8),
|
|
bi12PortGigCopper2PortGigFiberManagement(9),
|
|
bi24PortCopperModule(10),
|
|
fi24PortCopperModule(11),
|
|
bi16Port100FXModule(12),
|
|
bi8Port100FXModule(13),
|
|
bi8PortGigCopperModule(14),
|
|
bi12PortGigCopper2PortGigFiber(15),
|
|
bi2PortGigManagementModule(18),
|
|
bi24Port100FXModule(19),
|
|
bi0PortManagementModule(20),
|
|
pos622MbsModule(21),
|
|
pos155MbsModule(22),
|
|
bi2PortGigModule(23),
|
|
bi2PortGigCopperModule(24),
|
|
fi2PortGigModule(25),
|
|
fi4PortGigModule(26),
|
|
fi8PortGigModule(27),
|
|
fi8PortGigCopperModule(28),
|
|
fi8PortGigCopperManagementModule(29),
|
|
pos155Mbs2PModule(30),
|
|
fi4PortGigCopperManagementModule(31),
|
|
fi2PortGigCopperManagementModule(32),
|
|
bi4PortGigCopperManagementModule(33),
|
|
bi2PortGigCopperManagementModule(34),
|
|
bi8PortGigM4ManagementModule(35),
|
|
bi4PortGigM4ManagementModule(36),
|
|
bi2PortGigM4ManagementModule(37),
|
|
bi0PortGigM4ManagementModule(38),
|
|
bi0PortWSMManagementModule(39),
|
|
biPos2Port2488MbsModule(40),
|
|
bi0PortWSMModule(41),
|
|
niPos2Port2488MbsModule(42),
|
|
ni4802(43),
|
|
bi4PortGigNPAModule(44),
|
|
biAtm2Port155MbsModule(45),
|
|
biAtm4Port155MbsModule(46),
|
|
bi1Port10GigModule(47),
|
|
fes4802Module(48),
|
|
fes2402Module(49),
|
|
fes9604Module(50),
|
|
fes12GigCopperAndGigFiberModule(51),
|
|
fesx24GigModule(52),
|
|
fesx24Gig2TenGigModule(53),
|
|
fesx24Gig1TenGigModule(54),
|
|
fesx48GigModule(55),
|
|
fesx48Gig2TenGigModule(56),
|
|
fesx48Gig1TenGigModule(57),
|
|
bi40PortGigCopperHVModule(58), --unused
|
|
bi60PortGigCopperHVModule(59), --unused
|
|
bi8Port10GigModule(60), --unused
|
|
bi10PortGigHVModule(61), --unused
|
|
bi20PortGigHVModule(62), --unused
|
|
bi24PortGigModule(63), --unused
|
|
bi24PortGigCopperModule(64), --unused
|
|
bi48PortGigCopperModule(65), --unused
|
|
bi24PortGigFiberModule(66), --unused
|
|
ni4Port10GigSPModule(75), --unused
|
|
ni40PortGigSPModule(76), --unused
|
|
ni40PortGigCopperSPModule(77), --unused
|
|
ni2Port10GigSPModule(78), --unused
|
|
ni10PortGigSPModule(79), --unused
|
|
ni20PortGigSPModule(80), --unused
|
|
xmr4Port10GigSPModule(81), --unused
|
|
xmr20PortGigSPModule(82), --unused
|
|
xmr2Port10GigSPModule(83), --unused
|
|
xmr20PortGigCopperSPModule(84), --unused
|
|
xmr20PortGigFXSPModule(85), --unused
|
|
niImrMrManagementModule(86), --unused
|
|
niXmrMrManagementModule(87), --unused
|
|
xer4Port10GigSPModule(88), --unused
|
|
xer2Port10GigSPModule(89), --unused
|
|
xer20PortGigCopperSPModule(90), --unused
|
|
xer20PortGigFXSPModule(91), --unused
|
|
mlx4Port10GigSPModule(92), --unused
|
|
mlx2Port10GigSPModule(93), --unused
|
|
mlx20PortGigCopperSPModule(94), --unused
|
|
mlx20PortGigFXSPModule(95), --unused
|
|
mlx48PortGigMrj21SPModule(103), --unused
|
|
fesx24GigFiberGigCopperModule(112),
|
|
fesx24GigFiber2TenGigModule(113),
|
|
fesx24GigFiber1TenGigModule(114),
|
|
|
|
-- Modules for FGS/FLS family
|
|
fgs24PortManagementModule(144),
|
|
fgs48PortManagementModule(145),
|
|
fgsXfp2Port10gModule(152),
|
|
fgsCx42Port10gModule(153),
|
|
fgsXfp1Cx41Port10gModule(154),
|
|
fgsXpf1Port10gModule(155),
|
|
fls24PortCopperBaseModule(160),
|
|
fls48PortCopperBaseModule(161),
|
|
flsXfp1Port10gModule(168),
|
|
flsCx41Port10gModule(169),
|
|
|
|
--Modules for FCX family
|
|
fcx624SBaseModule(176),
|
|
fcx648SBaseModule(177),
|
|
fcx624SPoeBaseModule(180),
|
|
fcx648SPoeBaseModule(181),
|
|
fcxXfp2Port10gModule(184),
|
|
fcxCx42Port16gModule(185),
|
|
fcx624SFBaseModule(192),
|
|
|
|
biFiJc48ePort100fxIpcModule(195),
|
|
biFiJc48tPort100fxIpcModule(196),
|
|
biFiJc8PortGigM4ManagementModule(197),
|
|
biFiJc8PortGigIgcModule(198),
|
|
biFiJc16PortGigIgcModule(200),
|
|
biJc24PortCopperIpc4GigIgcModule(201),
|
|
biJc16PortGigCopperIgcModule(202),
|
|
biFiJc24Port100fxIpcModule(206),
|
|
bi2Port10GigModule(207),
|
|
biJc48tPortRJ21OmpModule(208),
|
|
biJc48ePortRJ45OmpModule(209),
|
|
biJc24PortIpcRJ45PoeModule(212),
|
|
biJc2PortGigIgcM4ManagementModule(214),
|
|
|
|
--Modules for MG-8, RX, XMR, MLX
|
|
|
|
fdryBi4Port10GigModule(1048), --
|
|
fdryBi40PortGigModule(1049), --
|
|
fdryBi1Port100FXManagementModule(1050),
|
|
fdryBi2Port10GigModule(1051), --
|
|
fdryBi40PortGigCopperModule(1052), --
|
|
fdryBi60PortGigCopperModule(1053), --
|
|
fdryBi4Port10GigHVModule(1054), --
|
|
fdryBi2Port10GigHVModule(1055), --
|
|
fdryBi8Port10GigHVModule(1056), --
|
|
fdryBi40PortGigHVModule(1057), --
|
|
fdryBi40PortGigCopperHVModule(1058), --
|
|
fdryBi60PortGigCopperHVModule(1059), --
|
|
fdryBi8Port10GigModule(1060), --
|
|
fdryBi10PortGigHVModule(1061), --
|
|
fdryBi20PortGigHVModule(1062), --
|
|
fdryBi24PortGigModule(1063), --
|
|
fdryBi24PortGigCopperModule(1064), --
|
|
fdryBi48PortGigCopperModule(1065),
|
|
fdryBi24PortGigFiberModule(1066),
|
|
fdryBi16Port10GigModule(1067),
|
|
fdryNi4Port10GigSPModule(1075),
|
|
fdryNi40PortGigSPModule(1076),
|
|
fdryNi40PortGigCopperSPModule(1077),
|
|
fdryNi2Port10GigSPModule(1078),
|
|
fdryNi10PortGigSPModule(1079),
|
|
fdryNi20PortGigSPModule(1080),
|
|
fdryXmr4Port10GigSPModule(1081), --
|
|
fdryXmr20PortGigSPModule(1082), --
|
|
fdryXmr2Port10GigSPModule(1083), --
|
|
fdryXmr20PortGigCopperSPModule(1084), --
|
|
fdryXmr20PortGigFXSPModule(1085), --
|
|
fdryNiImrMrManagementModule(1086),
|
|
fdryNiXmrMrManagementModule(1087),
|
|
fdryMlx4Port10GigSPModule(1088), --
|
|
fdryMlx2Port10GigSPModule(1089), --
|
|
fdryMlx20PortGigCopperSPModule(1090), --
|
|
fdryMlx20PortGigFXSPModule(1091), --
|
|
brMlx4Port10GigXModule(1093),
|
|
brMlx24PortGigCopperXModule(1094),
|
|
brMlx24PortGigSfpXModule(1095),
|
|
niCes24PortFiberModule(1096),
|
|
niCes24PortCopperModule(1097),
|
|
niCes2Port10GigModule(1098),
|
|
niCes48PortFiberModule(1099),
|
|
niCes48PortCopperModule(1100),
|
|
niCes48PortFiberWith2Port10GModule(1101),
|
|
niCes48PortCopperWith2Port10GModule(1102),
|
|
fdryMlx48PortGigMrj21SPModule(1103), --
|
|
fdryXmr2PortOC192SPModule(1104), --
|
|
fdryXmr1PortOC192SPModule(1105), --
|
|
fdryXmr8PortOC48SPModule(1106), --
|
|
fdryXmr4PortOC48SPModule(1107), --
|
|
fdryXmr2PortOC48SPModule(1108), --
|
|
fdryNiMlxMrManagementModule(1109),--
|
|
niMlx8Port10GigMModule (1110),
|
|
niMlx8Port10GigDModule (1111),
|
|
brMlx8Port10GigXModule (1112),
|
|
brMlx2Port100GigXModule (1113),
|
|
brcdMlxMr2ManagementModule(1114), -- for (BR-MLX-MR2-M board)
|
|
brcdXmrMr2ManagementModule(1115), -- for (BR-MLX-MR2-X board)
|
|
brcdMlx32Mr2ManagementModule(1116), -- for (BR-MLX32-MR2-M board)
|
|
brcdXmr32Mr2ManagementModule(1117), -- for (BR-MLX32-MR2-X board)
|
|
brcdNiXmr32MrManagementModule(1118),
|
|
brcdNiMlx32MrManagementModule(1119),
|
|
|
|
--Modules for FastIron Superx, SXR8, SXR16, V4 and V6 Modules
|
|
|
|
fdryFiV4Sx12ComboPortManagementModule(2064),
|
|
fdryFiV4Sx2Port10gModule(2065),
|
|
fdryFiV4Sx24PortGigCopperModule(2066),
|
|
fdryFiV4Sx24PortGigFiberModule(2067),
|
|
fdryFiV4Sx2Port10gLanWanModule(2068),
|
|
fdryFiV4Sx24Port100m1gFiberModule(2069),
|
|
fdryFiV4Sx12ComboPortManagement2Module(2074),
|
|
fdryFiV4Sx210gPortManagementModule(2080),
|
|
fdryFiSx0PortManagementModule(2081),
|
|
fdryFiV4Sx4g4fPortManagementModule(2083),
|
|
fdryFiV6Sx12ComboPortManagementModule(2096),
|
|
fdryFiV6Sx24PortGigCopperModule(2098),
|
|
fdryFiV6Sx2Port10gModule(2100),
|
|
fdryFiV6Sx24Port100m1gFiberModule(2101),
|
|
fdryFiV6Sx210gPortManagementModule(2102),
|
|
fdryFiV6Sx48PortGigCopperPoeModule(2103),
|
|
fdryFiV6Sx4g4fPortManagementModule(2104),
|
|
fdryFiV6Sx12ComboPortManagement2Module(2105),
|
|
fdryFiV6Sx48PortGigCopperModule(2106),
|
|
|
|
-- Modules for FWS family
|
|
fdryFws24PortCopperBaseModule(2224),
|
|
fdryFws48PortCopperBaseModule(2225),
|
|
fdryFws24GPortCopperBaseModule(2226),
|
|
fdryFws48GPortCopperBaseModule(2227),
|
|
|
|
--Modules for FCX family
|
|
fdryFcx624BaseModule(2208),
|
|
fdryFcx648BaseModule(2209),
|
|
fdryFcxSfpPlus4Port10gModule(2220),
|
|
|
|
--Modules for ICX6610 family
|
|
fdryIcx6610624BaseModule(2240),
|
|
fdryIcx6610648BaseModule(2241),
|
|
fdryIcx6610624PoeBaseModule(2244),
|
|
fdryIcx6610648PoeBaseModule(2245),
|
|
fdryIcx6610624FBaseModule(2246),
|
|
fdryIcx6610DualMode8PortModule(2248),
|
|
fdryIcx6610Qsfp10Port160gModule(2249),
|
|
|
|
--Modules for ICX6430 family
|
|
fdryIcx6430624BaseModule(2016),
|
|
fdryIcx6430648BaseModule(2017),
|
|
fdryIcx6430624PoeBaseModule(2020),
|
|
fdryIcx6430648PoeBaseModule(2021),
|
|
fdryIcx6430sfp4Port4gModule(2024),
|
|
|
|
--Modules for ICX6450 family
|
|
fdryIcx6450624BaseModule(2032),
|
|
fdryIcx6450648BaseModule(2033),
|
|
fdryIcx6450624PoeBaseModule(2036),
|
|
fdryIcx6450648PoeBaseModule(2037),
|
|
fdryIcx6450sfp4Port40gModule(2040)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Configured Module Type."
|
|
::= { snAgentConfigModuleEntry 2 }
|
|
|
|
|
|
snAgentConfigModuleRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a configured module table entry."
|
|
::= { snAgentConfigModuleEntry 3 }
|
|
|
|
|
|
snAgentConfigModuleDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the configured module."
|
|
::= { snAgentConfigModuleEntry 4 }
|
|
|
|
|
|
snAgentConfigModuleOperStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Module operational status. Zero length string indicates
|
|
that physical module has not been inserted to the chassis."
|
|
::= { snAgentConfigModuleEntry 5 }
|
|
|
|
|
|
snAgentConfigModuleSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Module serial number. Zero length string indicates that
|
|
module serial number EEPROM has not been programmed or
|
|
the module does not support serial number EEPROM."
|
|
::= { snAgentConfigModuleEntry 6 }
|
|
|
|
|
|
snAgentConfigModuleNumberOfPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports of module."
|
|
::= { snAgentConfigModuleEntry 7 }
|
|
|
|
|
|
snAgentConfigModuleMgmtModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
nonManagementModule(2),
|
|
unknownManagementModule(3),
|
|
m1ManagementModule(4),
|
|
m2ManagementModule(5),
|
|
m3ManagementModule(6),
|
|
m4ManagementModule(7),
|
|
m5ManagementModule(8),
|
|
jetcoreStackManagementModule(9),
|
|
muchoManagementModule(10),
|
|
rottWeilerManagementModule(11),
|
|
fesXStackManagementModule(12),
|
|
fgsStackManagementModule(13),
|
|
niCesManagementModule(14),
|
|
fastIronSuperXManagementModule(15),
|
|
fastIronSXRManagementModule(16),
|
|
fastIronV6SuperXManagementModule(17),
|
|
fastIronV6SXRManagementModule(18)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management module type."
|
|
::= { snAgentConfigModuleEntry 8 }
|
|
|
|
|
|
snAgentConfigModuleNumberOfCpus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of module CPUs."
|
|
::= { snAgentConfigModuleEntry 9 }
|
|
|
|
|
|
-- Agent System Parameters stacking Configuration Table
|
|
|
|
snAgentConfigModule2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentConfigModule2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each configured stacking module information."
|
|
::= { snAgentConfigModule 2 }
|
|
|
|
snAgentConfigModule2Entry OBJECT-TYPE
|
|
SYNTAX SnAgentConfigModule2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Agent Configured Stacking Module table."
|
|
INDEX { snAgentConfigModule2Unit,
|
|
snAgentConfigModule2Slot
|
|
}
|
|
::= { snAgentConfigModule2Table 1 }
|
|
|
|
SnAgentConfigModule2Entry ::= SEQUENCE {
|
|
snAgentConfigModule2Unit
|
|
Integer32,
|
|
snAgentConfigModule2Slot
|
|
Integer32,
|
|
snAgentConfigModule2Type
|
|
INTEGER,
|
|
snAgentConfigModule2RowStatus
|
|
INTEGER,
|
|
snAgentConfigModule2Description
|
|
DisplayString,
|
|
snAgentConfigModule2OperStatus
|
|
DisplayString,
|
|
snAgentConfigModule2SerialNumber
|
|
DisplayString,
|
|
snAgentConfigModule2NumberOfPorts
|
|
Integer32,
|
|
snAgentConfigModule2MgmtModuleType
|
|
INTEGER,
|
|
snAgentConfigModule2NumberOfCpus
|
|
Integer32
|
|
}
|
|
|
|
snAgentConfigModule2Unit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent Configured Module Table."
|
|
::= { snAgentConfigModule2Entry 1 }
|
|
|
|
snAgentConfigModule2Slot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Agent Configured Module Table."
|
|
::= { snAgentConfigModule2Entry 2 }
|
|
|
|
snAgentConfigModule2Type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bi8PortGigManagementModule(0),
|
|
bi4PortGigManagementModule(1),
|
|
bi16PortCopperManagementModule(2),
|
|
bi4PortGigModule(3),
|
|
fi2PortGigManagementModule(4),
|
|
fi4PortGigManagementModule(5),
|
|
bi8PortGigCopperManagementModule(6),
|
|
fi8PortGigManagementModule(7),
|
|
bi8PortGigModule(8),
|
|
bi12PortGigCopper2PortGigFiberManagement(9),
|
|
bi24PortCopperModule(10),
|
|
fi24PortCopperModule(11),
|
|
bi16Port100FXModule(12),
|
|
bi8Port100FXModule(13),
|
|
bi8PortGigCopperModule(14),
|
|
bi12PortGigCopper2PortGigFiber(15),
|
|
bi2PortGigManagementModule(18),
|
|
bi24Port100FXModule(19),
|
|
bi0PortManagementModule(20),
|
|
pos622MbsModule(21),
|
|
pos155MbsModule(22),
|
|
bi2PortGigModule(23),
|
|
bi2PortGigCopperModule(24),
|
|
fi2PortGigModule(25),
|
|
fi4PortGigModule(26),
|
|
fi8PortGigModule(27),
|
|
fi8PortGigCopperModule(28),
|
|
fi8PortGigCopperManagementModule(29),
|
|
pos155Mbs2PModule(30),
|
|
fi4PortGigCopperManagementModule(31),
|
|
fi2PortGigCopperManagementModule(32),
|
|
bi4PortGigCopperManagementModule(33),
|
|
bi2PortGigCopperManagementModule(34),
|
|
bi8PortGigM4ManagementModule(35),
|
|
bi4PortGigM4ManagementModule(36),
|
|
bi2PortGigM4ManagementModule(37),
|
|
bi0PortGigM4ManagementModule(38),
|
|
bi0PortWSMManagementModule(39),
|
|
biPos2Port2488MbsModule(40),
|
|
bi0PortWSMModule(41),
|
|
niPos2Port2488MbsModule(42),
|
|
ni4802(43),
|
|
bi4PortGigNPAModule(44),
|
|
biAtm2Port155MbsModule(45),
|
|
biAtm4Port155MbsModule(46),
|
|
bi1Port10GigModule(47),
|
|
fes4802Module(48),
|
|
fes2402Module(49),
|
|
fes9604Module(50),
|
|
fes12GigCopperAndGigFiberModule(51),
|
|
fesx24GigModule(52),
|
|
fesx24Gig2TenGigModule(53),
|
|
fesx24Gig1TenGigModule(54),
|
|
fesx48GigModule(55),
|
|
fesx48Gig2TenGigModule(56),
|
|
fesx48Gig1TenGigModule(57),
|
|
superx12ComboPortManagementModule(64),
|
|
superx2PortTenGigModule(65),
|
|
superx24PortGigCopperModule(66),
|
|
superx24PortGigFiberModule(67),
|
|
superx2PortTenGigLanWanModule(68),
|
|
superx24Port100tx1PortGigFiberModule(69),
|
|
superx12ComboPortManagement2Module(74),
|
|
superxR2PortTenGigManagementModule(80),
|
|
superxRManagementModule(81),
|
|
fesx24GigFiberGigCopperModule(112),
|
|
fesx24GigFiber2TenGigModule(113),
|
|
fesx24GigFiber1TenGigModule(114),
|
|
fgs24PortManagementModule(144),
|
|
fgs48PortManagementModule(145),
|
|
fgsXfp2Port10gModule(152),
|
|
fgsCx42Port10gModule(153),
|
|
fgsXfp1Cx41Port10gModule(154),
|
|
fgsXpf1Port10gModule(155),
|
|
fls24PortCopperBaseModule(160),
|
|
fls48PortCopperBaseModule(161),
|
|
flsXfp1Port10gModule(168),
|
|
flsCx41Port10gModule(169),
|
|
fcx624SBaseModule(176),
|
|
fcx648SBaseModule(177),
|
|
fcx624SPoeBaseModule(180),
|
|
fcx648SPoeBaseModule(181),
|
|
fcxXfp2Port10gModule(184),
|
|
fcxCx42Port16gModule(185),
|
|
fcx624SFBaseModule(192),
|
|
biFiJc48ePort100fxIpcModule(195),
|
|
biFiJc48tPort100fxIpcModule(196),
|
|
biFiJc8PortGigM4ManagementModule(197),
|
|
biFiJc8PortGigIgcModule(198),
|
|
biFiJc16PortGigIgcModule(200),
|
|
biJc24PortCopperIpc4GigIgcModule(201),
|
|
biJc16PortGigCopperIgcModule(202),
|
|
biFiJc24Port100fxIpcModule(206),
|
|
bi2Port10GigModule(207),
|
|
biJc48tPortRJ21OmpModule(208),
|
|
biJc48ePortRJ45OmpModule(209),
|
|
biJc24PortIpcRJ45PoeModule(212),
|
|
biJc2PortGigIgcM4ManagementModule(214),
|
|
-- Modules for FWS family
|
|
fdryFws24PortCopperBaseModule(2224),
|
|
fdryFws48PortCopperBaseModule(2225),
|
|
fdryFws24GPortCopperBaseModule(2226),
|
|
fdryFws48GPortCopperBaseModule(2227),
|
|
--Modules for FCX family
|
|
fdryFcx624BaseModule(2208),
|
|
fdryFcx648BaseModule(2209),
|
|
fdryFcxSfpPlus4Port10gModule(2220),
|
|
--Modules for ICX6610 family
|
|
fdryIcx6610624BaseModule(2240),
|
|
fdryIcx6610648BaseModule(2241),
|
|
fdryIcx6610624PoeBaseModule(2244),
|
|
fdryIcx6610648PoeBaseModule(2245),
|
|
fdryIcx6610624FBaseModule(2246),
|
|
fdryIcx6610DualMode8PortModule(2248),
|
|
fdryIcx6610Qsfp10Port160gModule(2249),
|
|
|
|
--Modules for ICX6430 family
|
|
fdryIcx6430624BaseModule(2016),
|
|
fdryIcx6430648BaseModule(2017),
|
|
fdryIcx6430624PoeBaseModule(2020),
|
|
fdryIcx6430648PoeBaseModule(2021),
|
|
fdryIcx6430sfp4Port4gModule(2024),
|
|
|
|
--Modules for ICX6450 family
|
|
fdryIcx6450624BaseModule(2032),
|
|
fdryIcx6450648BaseModule(2033),
|
|
fdryIcx6450624PoeBaseModule(2036),
|
|
fdryIcx6450648PoeBaseModule(2037),
|
|
fdryIcx6450sfp4Port40gModule(2040)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Configured Module Type."
|
|
::= { snAgentConfigModule2Entry 3 }
|
|
|
|
|
|
snAgentConfigModule2RowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a configured module table entry."
|
|
::= { snAgentConfigModule2Entry 4 }
|
|
|
|
|
|
snAgentConfigModule2Description OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the configured module."
|
|
::= { snAgentConfigModule2Entry 5 }
|
|
|
|
|
|
snAgentConfigModule2OperStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Module operational status. Zero length string indicates
|
|
that physical module has not been inserted to the chassis."
|
|
::= { snAgentConfigModule2Entry 6 }
|
|
|
|
|
|
snAgentConfigModule2SerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Module serial number. Zero length string indicates that
|
|
module serial number EEPROM has not been programmed or
|
|
the module does not support serial number EEPROM."
|
|
::= { snAgentConfigModule2Entry 7 }
|
|
|
|
|
|
snAgentConfigModule2NumberOfPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports of module."
|
|
::= { snAgentConfigModule2Entry 8 }
|
|
|
|
|
|
snAgentConfigModule2MgmtModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
nonManagementModule(2),
|
|
unknownManagementModule(3),
|
|
m1ManagementModule(4),
|
|
m2ManagementModule(5),
|
|
m3ManagementModule(6),
|
|
m4ManagementModule(7),
|
|
m5ManagementModule(8),
|
|
jetcoreStackManagementModule(9),
|
|
muchoManagementModule(10),
|
|
rottWeilerManagementModule(11),
|
|
fesXStackManagementModule(12),
|
|
fgsStackManagementModule(13) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management module type."
|
|
::= { snAgentConfigModule2Entry 9 }
|
|
|
|
|
|
snAgentConfigModule2NumberOfCpus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of module CPUs."
|
|
::= { snAgentConfigModule2Entry 10 }
|
|
|
|
|
|
-- Agent User Access Group
|
|
|
|
|
|
snAgentUserGbl OBJECT IDENTIFIER ::= { snAgentUser 1 }
|
|
|
|
snAgentUserMaxAccnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of user account entries can be configured."
|
|
::= { snAgentUserGbl 1 }
|
|
|
|
|
|
-- Agent User Account Table
|
|
|
|
|
|
snAgentUserAccntTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentUserAccntEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of user account information."
|
|
::= { snAgentUser 2 }
|
|
|
|
snAgentUserAccntEntry OBJECT-TYPE
|
|
SYNTAX SnAgentUserAccntEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Agent User table."
|
|
INDEX { snAgentUserAccntName }
|
|
::= { snAgentUserAccntTable 1 }
|
|
|
|
SnAgentUserAccntEntry ::= SEQUENCE {
|
|
snAgentUserAccntName
|
|
DisplayString,
|
|
snAgentUserAccntPassword
|
|
DisplayString,
|
|
snAgentUserAccntEncryptCode
|
|
Integer32,
|
|
snAgentUserAccntPrivilege
|
|
Integer32,
|
|
snAgentUserAccntRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snAgentUserAccntName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name."
|
|
::= { snAgentUserAccntEntry 1 }
|
|
|
|
snAgentUserAccntPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..48))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user password."
|
|
::= { snAgentUserAccntEntry 2 }
|
|
|
|
snAgentUserAccntEncryptCode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password encryption method code."
|
|
::= { snAgentUserAccntEntry 3 }
|
|
|
|
snAgentUserAccntPrivilege OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user privilege."
|
|
::= { snAgentUserAccntEntry 4 }
|
|
|
|
snAgentUserAccntRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a user account table entry."
|
|
::= { snAgentUserAccntEntry 5 }
|
|
|
|
-- Agent Redundant Group
|
|
|
|
|
|
snAgentRedunGbl OBJECT IDENTIFIER ::= { snAgentRedundant 1 }
|
|
|
|
snAgentRedunActiveMgmtMod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot number of the active management module. Setting
|
|
this object does not take effect immediately. Saving
|
|
configuration data to flash storage and reboot the
|
|
system are required to take effect. Setting a value of 0
|
|
requests the system to auto-select an active management
|
|
module after power up."
|
|
DEFVAL { 0 }
|
|
::= { snAgentRedunGbl 1 }
|
|
|
|
snAgentRedunSyncConfig OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frequency of the backup management module copying the
|
|
configuration data from the active management module.
|
|
Each unit is 1 second. Setting a value 0 will disable
|
|
the synchronization copy. Setting a negative value will
|
|
initiate the synchronization copy once immediately."
|
|
::= { snAgentRedunGbl 2 }
|
|
|
|
snAgentRedunBkupCopyBootCode OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled(1), the backup management module copies the boot code
|
|
from the active management module to its boot code flash storage
|
|
after power up, and whenever the active management module's boot
|
|
code is updated. The backup management module does not copy if
|
|
both boot codes were identical."
|
|
DEFVAL { disabled }
|
|
::= { snAgentRedunGbl 3 }
|
|
|
|
snAgentEnableMgmtModRedunStateChangeTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is permitted to
|
|
generate management module redundancy state change traps."
|
|
DEFVAL { enabled }
|
|
::= { snAgentRedunGbl 4 }
|
|
|
|
snAgentRedunBkupBootLoad OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
operationError(17),
|
|
downloadBackup(20)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to down load a new boot code from boot flash storage
|
|
of the active management module to the backup management module.
|
|
The following are returned values from get operation:
|
|
normal(1)............no operation
|
|
operationError(17)...error codes
|
|
|
|
The following are input values from set operation:
|
|
downloadBackup(20)...download the boot code from the active
|
|
management module to the backup management
|
|
module
|
|
|
|
Any set operation is rejected during loading until error
|
|
or normal state is reached."
|
|
::= { snAgentRedunGbl 5 }
|
|
|
|
snAgentRedunSwitchOver OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To force a switch-over from standby to active state
|
|
if the backup management module exists in a chassis."
|
|
::= { snAgentRedunGbl 6 }
|
|
|
|
-- System CPU Utilization Table.
|
|
|
|
snAgentCpuUtilTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentCpuUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list utilization for all CPUs in the device."
|
|
::= { snAgentCpu 1 }
|
|
|
|
snAgentCpuUtilEntry OBJECT-TYPE
|
|
SYNTAX SnAgentCpuUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the CPU utilization table."
|
|
INDEX {
|
|
snAgentCpuUtilSlotNum,
|
|
snAgentCpuUtilCpuId,
|
|
snAgentCpuUtilInterval
|
|
}
|
|
::= { snAgentCpuUtilTable 1 }
|
|
|
|
SnAgentCpuUtilEntry ::= SEQUENCE {
|
|
snAgentCpuUtilSlotNum
|
|
Integer32,
|
|
snAgentCpuUtilCpuId
|
|
Integer32,
|
|
snAgentCpuUtilInterval
|
|
Integer32,
|
|
snAgentCpuUtilValue
|
|
Gauge32,
|
|
snAgentCpuUtilPercent
|
|
Gauge32,
|
|
snAgentCpuUtil100thPercent
|
|
Gauge32
|
|
}
|
|
|
|
snAgentCpuUtilSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number of module which contains the cpu."
|
|
::= { snAgentCpuUtilEntry 1 }
|
|
|
|
snAgentCpuUtilCpuId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of cpu. For non-VM1/WSM management module, there is one CPU.
|
|
For VM1/WSM there's one management CPU and three slave CPUs.
|
|
The management CPU could be turned off. For POS and ATM
|
|
there's no management CPU but two slave CPUs.
|
|
Id for management cpu is 1. Value of 2 or greater are for slave CPUs. "
|
|
::= { snAgentCpuUtilEntry 2 }
|
|
|
|
snAgentCpuUtilInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value, in seconds, for this utilization. For both management and slave CPU, we display
|
|
utilization for 1 sec, 5 sec, 60 sec and 300 sec interval."
|
|
::= { snAgentCpuUtilEntry 3 }
|
|
|
|
snAgentCpuUtilValue OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The statistical CPU utilization in units of one-hundredth
|
|
of a percent. This value is deprecated. Users are recommended
|
|
to use snAgentCpuUtilPercent or snAgentCpuUtil100thPercent
|
|
instead."
|
|
::= { snAgentCpuUtilEntry 4 }
|
|
|
|
snAgentCpuUtilPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistical CPU utilization in units of a percent."
|
|
::= { snAgentCpuUtilEntry 5 }
|
|
|
|
snAgentCpuUtil100thPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistical CPU utilization in units of one-hundredth
|
|
of a percent."
|
|
::= { snAgentCpuUtilEntry 6 }
|
|
|
|
-- System Process Utilization Table.
|
|
|
|
snCpuProcessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnCpuProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list utilization and runtime for all CPU processes in the device."
|
|
::= { snAgentCpu 2 }
|
|
|
|
snCpuProcessEntry OBJECT-TYPE
|
|
SYNTAX SnCpuProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the CPU process table."
|
|
INDEX {
|
|
snCpuProcessName
|
|
}
|
|
::= { snCpuProcessTable 1 }
|
|
|
|
SnCpuProcessEntry ::= SEQUENCE {
|
|
snCpuProcessName
|
|
DisplayString,
|
|
snCpuProcess5SecUtil
|
|
Gauge32,
|
|
snCpuProcess1MinUtil
|
|
Gauge32,
|
|
snCpuProcess5MinUtil
|
|
Gauge32,
|
|
snCpuProcess15MinUtil
|
|
Gauge32,
|
|
snCpuProcessRuntime
|
|
Counter32
|
|
}
|
|
|
|
snCpuProcessName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The process name."
|
|
::= { snCpuProcessEntry 1 }
|
|
|
|
snCpuProcess5SecUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of last 5 second process utilization."
|
|
::= { snCpuProcessEntry 2 }
|
|
|
|
snCpuProcess1MinUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of last 1 minute process utilization."
|
|
::= { snCpuProcessEntry 3 }
|
|
|
|
snCpuProcess5MinUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of last 5 minute process utilization."
|
|
::= { snCpuProcessEntry 4 }
|
|
|
|
snCpuProcess15MinUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection of last 15 minute process utilization."
|
|
::= { snCpuProcessEntry 5 }
|
|
|
|
snCpuProcessRuntime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Process runtime in milliseconds."
|
|
::= { snCpuProcessEntry 6 }
|
|
|
|
-- Hardware ICBM (Integrated Central Buffer Manager) Counter Table.
|
|
|
|
snAgentHwICBMCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentHwICBMCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list the ICBM counter values.
|
|
This table is not supported on 10G module."
|
|
::= { snAgentHw 1 }
|
|
|
|
snAgentHwICBMCounterEntry OBJECT-TYPE
|
|
SYNTAX SnAgentHwICBMCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row representing ICBM counter values for that slot."
|
|
INDEX {
|
|
snAgentHwICBMCounterSlot,
|
|
snAgentHwICBMCounterDMA
|
|
}
|
|
::= { snAgentHwICBMCounterTable 1 }
|
|
|
|
SnAgentHwICBMCounterEntry ::= SEQUENCE {
|
|
snAgentHwICBMCounterSlot
|
|
Unsigned32,
|
|
snAgentHwICBMCounterDMA
|
|
Unsigned32,
|
|
snAgentHwICBMCounterFreeDepth
|
|
Gauge32,
|
|
snAgentHwICBMCounterWriteDrop
|
|
Counter32,
|
|
snAgentHwICBMCounterWriteInput
|
|
Counter32,
|
|
snAgentHwICBMCounterWriteOutput
|
|
Counter32,
|
|
snAgentHwICBMCounterReadInput
|
|
Counter32,
|
|
snAgentHwICBMCounterReadOutput
|
|
Counter32
|
|
}
|
|
|
|
snAgentHwICBMCounterSlot OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot number where ICBM resides."
|
|
::= { snAgentHwICBMCounterEntry 1 }
|
|
|
|
snAgentHwICBMCounterDMA OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DMA Id within a slot where ICBM resides. Valid only for Jetcore modules.
|
|
For non-Jetcore modules, this index is ignored by the agent. In this case, value
|
|
0 will be returned by the agent."
|
|
::= { snAgentHwICBMCounterEntry 2 }
|
|
|
|
snAgentHwICBMCounterFreeDepth OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current depth of the free queue for this ICBM."
|
|
::= { snAgentHwICBMCounterEntry 3 }
|
|
|
|
snAgentHwICBMCounterWriteDrop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Write sequencer drop count for this ICBM."
|
|
::= { snAgentHwICBMCounterEntry 4 }
|
|
|
|
snAgentHwICBMCounterWriteInput OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Write sequencer input counter for this ICBM."
|
|
::= { snAgentHwICBMCounterEntry 5 }
|
|
|
|
snAgentHwICBMCounterWriteOutput OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Write sequencer output counter for this ICBM."
|
|
::= { snAgentHwICBMCounterEntry 6 }
|
|
|
|
snAgentHwICBMCounterReadInput OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read sequencer input counter for this ICBM."
|
|
::= { snAgentHwICBMCounterEntry 7 }
|
|
|
|
snAgentHwICBMCounterReadOutput OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read sequencer output counter for this ICBM."
|
|
::= { snAgentHwICBMCounterEntry 8 }
|
|
|
|
-- IP CAM Statistics Table.
|
|
|
|
snCAMIpStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnCAMIpStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list the IP CAM statistics.
|
|
"
|
|
::= { snAgentHw 2 }
|
|
|
|
snCAMIpStatEntry OBJECT-TYPE
|
|
SYNTAX SnCAMIpStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row representing IP CAM statistics for a given interface and level."
|
|
INDEX {
|
|
snCAMIpStatIfIndex,
|
|
snCAMIpStatLevel
|
|
}
|
|
::= { snCAMIpStatTable 1 }
|
|
|
|
SnCAMIpStatEntry ::= SEQUENCE {
|
|
snCAMIpStatIfIndex Unsigned32,
|
|
snCAMIpStatLevel Unsigned32,
|
|
snCAMIpStatFreeEntries Unsigned32,
|
|
snCAMIpStatTotalEntries Unsigned32
|
|
}
|
|
|
|
snCAMIpStatIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local interface."
|
|
::= { snCAMIpStatEntry 1 }
|
|
|
|
snCAMIpStatLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Level of CAM entry for that interface."
|
|
::= { snCAMIpStatEntry 2 }
|
|
|
|
snCAMIpStatFreeEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Free entries in the IP CAM for that interface and level."
|
|
::= { snCAMIpStatEntry 3 }
|
|
|
|
snCAMIpStatTotalEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total entries in the IP CAM for that interface and level."
|
|
::= { snCAMIpStatEntry 4 }
|
|
|
|
-- CAM Statistics Table.
|
|
|
|
snCAMStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnCAMStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list the CAM statistics.
|
|
"
|
|
::= { snAgentHw 3 }
|
|
|
|
snCAMStatEntry OBJECT-TYPE
|
|
SYNTAX SnCAMStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row representing CAM statistics for a given DMA Id number."
|
|
INDEX {
|
|
snCamStatDMAIdNumber
|
|
}
|
|
::= { snCAMStatTable 1 }
|
|
|
|
SnCAMStatEntry ::= SEQUENCE {
|
|
snCamStatDMAIdNumber Unsigned32,
|
|
snCamStatDMAMasterNumber Unsigned32,
|
|
snCamStatFreePool0Entries Unsigned32,
|
|
snCamStatFreePool1Entries Unsigned32,
|
|
snCamStatFreePool2Entries Unsigned32,
|
|
snCamStatFreePool3Entries Unsigned32,
|
|
snCamStatFreeL2Entries Unsigned32,
|
|
snCamStatFreeL2LowestSection Unsigned32,
|
|
snCamStatHostLookupCount Counter32,
|
|
snCamStatRouteLookupCount Counter32,
|
|
snCamStatLevel1 Unsigned32,
|
|
snCamStatLevel2 Unsigned32,
|
|
snCamStatLevel3 Unsigned32,
|
|
snCamStatMacFailCount Counter32,
|
|
snCamStatIPRouteFailCount Counter32,
|
|
snCamStatIPSessionFailCount Counter32,
|
|
snCamStatIPMCastFailCount Counter32,
|
|
snCamStatL2SessionFailCount Counter32,
|
|
snCamStatAddMACCount Counter32,
|
|
snCamStatAddVLANCount Counter32,
|
|
snCamStatAddIPHostCount Counter32,
|
|
snCamStatAddIPRouteCount Counter32,
|
|
snCamStatAddIPSessionCount Counter32,
|
|
snCamStatAddIPMCastCount Counter32,
|
|
snCamStatAddL2SessionCount Counter32,
|
|
snCamStatAddIPXCount Counter32,
|
|
snCamStatDeleteDMACamCount Counter32
|
|
}
|
|
|
|
snCamStatDMAIdNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DMA Id number."
|
|
::= { snCAMStatEntry 1 }
|
|
|
|
snCamStatDMAMasterNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DMA Master for that DMA Id."
|
|
::= { snCAMStatEntry 2 }
|
|
|
|
snCamStatFreePool0Entries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM free pool0 entries."
|
|
::= { snCAMStatEntry 3 }
|
|
|
|
snCamStatFreePool1Entries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM free pool1 entries."
|
|
::= { snCAMStatEntry 4 }
|
|
|
|
snCamStatFreePool2Entries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM free pool2 entries."
|
|
::= { snCAMStatEntry 5 }
|
|
|
|
snCamStatFreePool3Entries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM free pool3 entries."
|
|
::= { snCAMStatEntry 6 }
|
|
|
|
snCamStatFreeL2Entries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM Free L2 entries."
|
|
::= { snCAMStatEntry 7 }
|
|
|
|
snCamStatFreeL2LowestSection OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM Free L2 lowest section entries."
|
|
::= { snCAMStatEntry 8 }
|
|
|
|
snCamStatHostLookupCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM host lookup count for router."
|
|
::= { snCAMStatEntry 9 }
|
|
|
|
snCamStatRouteLookupCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM route lookup count for router."
|
|
::= { snCAMStatEntry 10 }
|
|
|
|
snCamStatLevel1 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM stat level1 entries for router."
|
|
::= { snCAMStatEntry 11 }
|
|
|
|
snCamStatLevel2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM stat level2 entries for router."
|
|
::= { snCAMStatEntry 12 }
|
|
|
|
snCamStatLevel3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM stat level3 entries for router."
|
|
::= { snCAMStatEntry 13 }
|
|
|
|
snCamStatMacFailCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM MAC fail count."
|
|
::= { snCAMStatEntry 14 }
|
|
|
|
snCamStatIPRouteFailCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM IP route fail count."
|
|
::= { snCAMStatEntry 15 }
|
|
|
|
snCamStatIPSessionFailCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM IP session fail count."
|
|
::= { snCAMStatEntry 16 }
|
|
|
|
snCamStatIPMCastFailCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM IP multicast fail count."
|
|
::= { snCAMStatEntry 17 }
|
|
|
|
snCamStatL2SessionFailCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM L2 session fail count."
|
|
::= { snCAMStatEntry 18 }
|
|
|
|
snCamStatAddMACCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add MAC count."
|
|
::= { snCAMStatEntry 19 }
|
|
|
|
snCamStatAddVLANCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add VLAN count."
|
|
::= { snCAMStatEntry 20 }
|
|
|
|
snCamStatAddIPHostCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add IP host count."
|
|
::= { snCAMStatEntry 21 }
|
|
|
|
snCamStatAddIPRouteCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add IP route count."
|
|
::= { snCAMStatEntry 22 }
|
|
|
|
snCamStatAddIPSessionCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add IP session count."
|
|
::= { snCAMStatEntry 23 }
|
|
|
|
snCamStatAddIPMCastCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add IP multicast count."
|
|
::= { snCAMStatEntry 24 }
|
|
|
|
snCamStatAddL2SessionCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add L2 session count."
|
|
::= { snCAMStatEntry 25 }
|
|
|
|
snCamStatAddIPXCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM add IPX count."
|
|
::= { snCAMStatEntry 26 }
|
|
|
|
snCamStatDeleteDMACamCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAM delete DMA CAM count."
|
|
::= { snCAMStatEntry 27 }
|
|
|
|
-- System DRAM info Group.
|
|
snAgSystemDRAM OBJECT IDENTIFIER ::= { snAgentHw 4 }
|
|
|
|
snAgSystemDRAMUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system dynamic memory utilization, in unit of percentage."
|
|
::= { snAgSystemDRAM 1 }
|
|
|
|
snAgSystemDRAMTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total amount of system dynamic memory, in number of bytes."
|
|
::= { snAgSystemDRAM 2 }
|
|
|
|
snAgSystemDRAMFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The free amount of system dynamic memory, in number of bytes."
|
|
::= { snAgSystemDRAM 3 }
|
|
|
|
snAgSystemDRAMForBGP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The free amount of system dynamic memory used by BGP, in number of bytes."
|
|
::= { snAgSystemDRAM 4 }
|
|
|
|
snAgSystemDRAMForOSPF OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The free amount of system dynamic memory used by OSPF, in number of bytes."
|
|
::= { snAgSystemDRAM 5 }
|
|
|
|
-- System Debug Group. You would see output of "de" command here.
|
|
snAgSystemDebug OBJECT IDENTIFIER ::= { snAgentHw 5 }
|
|
|
|
snAgSystemDebugTotalIn OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total incoming packet count. Sum of Buffer Manager and CPU read count."
|
|
::= { snAgSystemDebug 1 }
|
|
|
|
snAgSystemDebugTotalOut OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total outgoing packet count."
|
|
::= { snAgSystemDebug 2 }
|
|
|
|
snAgSystemDebugCpuQueueRead OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU Queue read count."
|
|
::= { snAgSystemDebug 3 }
|
|
|
|
snAgSystemDebugDRAMBuffer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DRAM buffer count."
|
|
::= { snAgSystemDebug 4 }
|
|
|
|
snAgSystemDebugBMBuffer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BM buffer count."
|
|
::= { snAgSystemDebug 5 }
|
|
|
|
snAgSystemDebugBMFreeBuffer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BM free buffer count."
|
|
::= { snAgSystemDebug 6 }
|
|
|
|
snAgSystemDebugBMFreeBufferMgmt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BM free buffer management count."
|
|
::= { snAgSystemDebug 7 }
|
|
|
|
snAgSystemDebugIpcGigLock OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPC GIG lock count."
|
|
::= { snAgSystemDebug 8 }
|
|
|
|
snAgSystemDebugDRAMGetError OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DRAM get error count."
|
|
::= { snAgSystemDebug 9 }
|
|
|
|
snAgSystemDebugDRAMToBMCopyFail OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DRAM to Buffer Manager copy fail count."
|
|
::= { snAgSystemDebug 10 }
|
|
|
|
-- System Temperature Table.
|
|
|
|
snAgentTempTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentTempEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list temperatures of all the modules in the device. This
|
|
table is applicable to only those modules with temperature sensors."
|
|
::= { snAgentTemp 1 }
|
|
|
|
snAgentTempEntry OBJECT-TYPE
|
|
SYNTAX SnAgentTempEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the module temperature table."
|
|
INDEX { snAgentTempSlotNum, snAgentTempSensorId }
|
|
::= { snAgentTempTable 1 }
|
|
|
|
SnAgentTempEntry ::= SEQUENCE {
|
|
snAgentTempSlotNum
|
|
Integer32,
|
|
snAgentTempSensorId
|
|
Integer32,
|
|
snAgentTempSensorDescr
|
|
DisplayString,
|
|
snAgentTempValue
|
|
INTEGER
|
|
}
|
|
|
|
snAgentTempSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number of module which contains the temperature sensor
|
|
represented by this row."
|
|
::= { snAgentTempEntry 1 }
|
|
|
|
snAgentTempSensorId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature sensor identifier of Slave module whose temperature is
|
|
represented by this row, for management module: sensor#1 - Intake Side Temperature
|
|
sensor# 2 - Exhaust Side Temperature."
|
|
::= { snAgentTempEntry 2 }
|
|
|
|
snAgentTempSensorDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the temperature sensor in a human readable form. This
|
|
is the same as snAgentTempSensorId, which is numeric and used to
|
|
traverse the temperature sensor table. The description provides
|
|
the meaning and purpose of this senor."
|
|
::= { snAgentTempEntry 3 }
|
|
|
|
snAgentTempValue OBJECT-TYPE
|
|
SYNTAX INTEGER (-110..250)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of the the sensor represented by this row. Each unit
|
|
is 0.5 degrees Celcius."
|
|
::= { snAgentTempEntry 4 }
|
|
|
|
|
|
-- System Temperature Threshold Table.
|
|
|
|
snAgentTempThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentTempThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list temperature threshold levels for 4 speeds of fan settings.
|
|
Depending on the temperature level, the fans run at diffrent speeds of RPM.
|
|
There are 4 levels of temperature settings for 4 fan speeds (low, medium,
|
|
medium-high, high). This table is applicable to only those modules with
|
|
temperature sensors. For each row, there are 2 temperature threshold values.
|
|
The high value, if reached causes the fan to run at next high level speed
|
|
and when it reduces the below the low value, the fan runs at next low spped."
|
|
::= { snAgentTemp 2 }
|
|
|
|
snAgentTempThresholdEntry OBJECT-TYPE
|
|
SYNTAX SnAgentTempThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the module temperature threshold table."
|
|
INDEX { snAgentTempThresholdModule, snAgentTempThresholdLevel }
|
|
::= { snAgentTempThresholdTable 1 }
|
|
|
|
SnAgentTempThresholdEntry ::= SEQUENCE {
|
|
snAgentTempThresholdModule
|
|
INTEGER,
|
|
snAgentTempThresholdLevel
|
|
INTEGER,
|
|
snAgentTempThresholdHighValue
|
|
INTEGER,
|
|
snAgentTempThresholdLowValue
|
|
INTEGER
|
|
}
|
|
|
|
snAgentTempThresholdModule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mgmtModule(1), -- management module
|
|
slaveModule(2), -- slave/line module
|
|
switchFabricModule(3) -- switch fabric module
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The module in the system for which threshold levels represented by this
|
|
row are applicable."
|
|
::= { snAgentTempThresholdEntry 1 }
|
|
|
|
snAgentTempThresholdLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
medium(2),
|
|
mediumHhigh(3),
|
|
high(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature threshold level of the module for which threshold levels
|
|
represented by this row are applicable."
|
|
::= { snAgentTempThresholdEntry 2 }
|
|
|
|
snAgentTempThresholdHighValue OBJECT-TYPE
|
|
SYNTAX INTEGER (-110..250)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high value for the temperature threshold, above which the fans would
|
|
need to operate at the next higher speed. If it reaches more than the
|
|
high threshold value for 'high' level, the module will be shutdown."
|
|
::= { snAgentTempThresholdEntry 3 }
|
|
|
|
snAgentTempThresholdLowValue OBJECT-TYPE
|
|
SYNTAX INTEGER (-110..250)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low value for the temperature threshold, below which the fans would
|
|
need to operate at the next lower speed. This value is not applicable for
|
|
the 'low' level, as there is no more lower speeds than that."
|
|
::= { snAgentTempThresholdEntry 4 }
|
|
|
|
-- System Stacking Temperature Table.
|
|
|
|
snAgentTemp2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnAgentTemp2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to list temperatures of the modules in the device for each unit. This
|
|
table is applicable to only those modules with temperature sensors."
|
|
::= { snAgentTemp 3 }
|
|
|
|
snAgentTemp2Entry OBJECT-TYPE
|
|
SYNTAX SnAgentTemp2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the module temperature table."
|
|
INDEX { snAgentTemp2UnitNum, snAgentTemp2SlotNum, snAgentTemp2SensorId }
|
|
::= { snAgentTemp2Table 1 }
|
|
|
|
SnAgentTemp2Entry ::= SEQUENCE {
|
|
snAgentTemp2UnitNum
|
|
Integer32,
|
|
snAgentTemp2SlotNum
|
|
Integer32,
|
|
snAgentTemp2SensorId
|
|
Integer32,
|
|
snAgentTemp2SensorDescr
|
|
DisplayString,
|
|
snAgentTemp2Value
|
|
INTEGER
|
|
}
|
|
|
|
snAgentTemp2UnitNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit number of module which contains the temperature sensor
|
|
represented by this row."
|
|
::= { snAgentTemp2Entry 1 }
|
|
|
|
snAgentTemp2SlotNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number of module which contains the temperature sensor
|
|
represented by this row."
|
|
::= { snAgentTemp2Entry 2 }
|
|
|
|
snAgentTemp2SensorId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature sensor identifier of Slave module whose temperature is
|
|
represented by this row, for FastIron management module: sensor#1 - Intake Side Temperature
|
|
sensor# 2 - Exhaust Side Temperature."
|
|
::= { snAgentTemp2Entry 3 }
|
|
|
|
snAgentTemp2SensorDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the temperature sensor in a human readable form. This
|
|
is the same as snAgentTempSensorId, which is numeric and used to
|
|
traverse the temperature sensor table. The description provides
|
|
the meaning and purpose of this senor."
|
|
::= { snAgentTemp2Entry 4 }
|
|
|
|
snAgentTemp2Value OBJECT-TYPE
|
|
SYNTAX INTEGER (-110..250)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of the sensor represented by this row. Each unit
|
|
is 0.5 degrees Celsius."
|
|
::= { snAgentTemp2Entry 5 }
|
|
|
|
fdryLicenseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FdryLicenseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of licenses maintained by license sub-system."
|
|
::= { snAgentLicense 1 }
|
|
|
|
fdryLicenseEntry OBJECT-TYPE
|
|
SYNTAX FdryLicenseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in a license table."
|
|
INDEX {fdryLicensePackageName, fdryLicenseLid, IMPLIED fdryLicenseHash}
|
|
::= { fdryLicenseTable 1 }
|
|
|
|
FdryLicenseEntry ::= SEQUENCE {
|
|
fdryLicensePackageName
|
|
DisplayString,
|
|
fdryLicenseLid
|
|
DisplayString,
|
|
fdryLicenseHash
|
|
DisplayString,
|
|
fdryLicenseType
|
|
INTEGER,
|
|
fdryLicensePrecedence
|
|
Unsigned32,
|
|
fdryLicenseTrialDays
|
|
Unsigned32,
|
|
fdryLicenseTrialTimeElapsed
|
|
Unsigned32,
|
|
fdryLicenseTrialTimeLeft
|
|
Unsigned32,
|
|
fdryLicenseTrialState
|
|
INTEGER,
|
|
fdryLicenseVendorInfo
|
|
DisplayString,
|
|
fdryLicenseSlot
|
|
Integer32
|
|
}
|
|
|
|
fdryLicensePackageName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the package, whose license information, this entry displays."
|
|
::= { fdryLicenseEntry 1 }
|
|
|
|
fdryLicenseLid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..11))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"License Id (LID) of the chassis or the line module for which, this entry
|
|
displays license information."
|
|
::= { fdryLicenseEntry 2 }
|
|
|
|
fdryLicenseHash OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique hash for identifying a license entry in the system. This helps
|
|
traverse through the entries with same package name and LID."
|
|
::= { fdryLicenseEntry 3 }
|
|
|
|
fdryLicenseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
trial(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the license, which can be either normal or trial."
|
|
::= { fdryLicenseEntry 4 }
|
|
|
|
fdryLicensePrecedence OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the priority of a particular trial license among those having
|
|
the same package and LID. This is primarily used for determining which
|
|
license to use, when there are many trial and normal licenses with same
|
|
package name and LID."
|
|
::= { fdryLicenseEntry 5 }
|
|
|
|
fdryLicenseTrialDays OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of trial days for the license, if it's a trial license.
|
|
Otherwise, the value has no meaning for normal licenses and read
|
|
as 0 on Get operation."
|
|
::= { fdryLicenseEntry 6 }
|
|
|
|
fdryLicenseTrialTimeElapsed OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of trial hours for the license, if it's a trial license.
|
|
Otherwise, the value has no meaning for normal licenses and read
|
|
as 0 on Get operation."
|
|
::= { fdryLicenseEntry 7 }
|
|
|
|
fdryLicenseTrialTimeLeft OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of hours left for the trial license. This is derived
|
|
from the total number of hours and the cumulative number of hours
|
|
used. For a normal license, this is 0."
|
|
::= { fdryLicenseEntry 8 }
|
|
|
|
fdryLicenseTrialState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
unused(2),
|
|
active(3),
|
|
expired(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the state of the trial license. Invalid means the
|
|
license is not valid for this box, unused means the license is
|
|
never used, avtive means it has been used at least once and expired
|
|
means it has expired and can't be used any more."
|
|
::= { fdryLicenseEntry 9 }
|
|
|
|
fdryLicenseVendorInfo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Brocade specific package data which is an octet string.
|
|
This contains encoded information of license specific information
|
|
such as package bit mask, number of ports, etc."
|
|
::= { fdryLicenseEntry 10 }
|
|
|
|
fdryLicenseSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the slot number of the module, the license belongs to.
|
|
There is a one to one mapping between LID and slot number, as each
|
|
module has unique LID and can be present only in one slot."
|
|
::= { fdryLicenseEntry 11 }
|
|
|
|
fdryLicensedFeatureInfo OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ospf(0),
|
|
isis(1),
|
|
bgp(2),
|
|
mpls(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The features or packages enabled/licensed on the system."
|
|
::= { snAgentLicense 2 }
|
|
|
|
|
|
brcdSwPackageFname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the release package file or manifest file (including path)
|
|
currently associated with the system.
|
|
When the object is not used, the value is a zero length string."
|
|
::= { brcdSwPackageUpgrade 1 }
|
|
|
|
brcdSwPackageLoad OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
tftpToPrimary(2),
|
|
tftpToSecondary(3),
|
|
tftpToMgmtModulePrimaryIntfModuleSecondary(4),
|
|
tftpToMgmtModuleSecondaryIntfModulePrimary(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action object to upgrade the system using a release package.
|
|
none(1) is the value after the system comes up and should not be used for set-request.
|
|
The following values will download the release package from a TFTP server and upgrade the system :
|
|
tftpToPrimary(2) installs both MP and LP application images to primary code.
|
|
tftpToSecondary(3) installs both MP and LP application images to secondary code.
|
|
tftpToMgmtModulePrimaryIntfModuleSecondary (4) installs MP application image to primary code and the LP
|
|
application images to secondary code.
|
|
tftpToMgmtModuleSecondaryIntfModulePrimary (5) installs MP application image to secondary code and the LP
|
|
application images to primary code."
|
|
::= { brcdSwPackageUpgrade 2 }
|
|
|
|
brcdSwPackageLoadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
started(2),
|
|
internalError(3),
|
|
manifestFileDownloadError(4),
|
|
manifestFileValidationError(5),
|
|
downloadingManagementModuleBoot (6),
|
|
downloadingManagementModuleMonitor (7),
|
|
downloadingManagementModuleApplication (8),
|
|
downloadingInterfaceModuleBoot (9),
|
|
downloadingInterfaceModuleMonitor (10),
|
|
downloadingInterfaceModuleApplication (11),
|
|
downloadingInterfaceModuleFpga (12),
|
|
downloadingFpgaMBridge (13),
|
|
downloadingFpgaSBridge (14),
|
|
downloadingFpgaHBridge (15),
|
|
upgradingManagementModuleBoot (16),
|
|
upgradingManagementModuleMonitor (17),
|
|
upgradingManagementModuleApplication (18),
|
|
upgradingInterfaceModuleBoot (19),
|
|
upgradingInterfaceModuleMonitor (20),
|
|
upgradingInterfaceModuleApplication (21),
|
|
upgradingInterfaceModuleFpga (22),
|
|
upgradingFpgaMBridge (23),
|
|
upgradingFpgaSBridge (24),
|
|
upgradingFpgaHBridge (25)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the progress of the upgrade operation.
|
|
<TBD: more description> "
|
|
::= { brcdSwPackageUpgrade 3 }
|
|
|
|
brcdSwPackageUpgradeAllImages OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To specify an all-image upgrade.
|
|
If set to true(1), the upgrade sequence will include the MP and
|
|
LP BOOT images, and MP FPGA images (MBRIDGE/MBRIDGE32 and
|
|
SBRIDGE/HSBRIDGE). For CES/CER the upgrade sequence
|
|
includes the boot image.
|
|
Default is false(2) which will upgrade only the MP and LP Monitor
|
|
images, MP and LP Application images, and LP Bundled FPGA. For
|
|
CES/CER, only the monitor, application, and FPGA images will be upgraded.
|
|
For a read operation, this will always return false(2)."
|
|
DEFVAL { false }
|
|
::= { brcdSwPackageUpgrade 4 }
|
|
|
|
brcdSwPackageUpgradeResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdSwPackageUpgradeResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the summary of the upgrade operation."
|
|
::= { brcdSwPackageUpgrade 5 }
|
|
|
|
brcdSwPackageUpgradeResultEntry OBJECT-TYPE
|
|
SYNTAX BrcdSwPackageUpgradeResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"<TBD>"
|
|
INDEX { brcdSwPackageUpgradeResultIndex }
|
|
::= { brcdSwPackageUpgradeResultTable 1 }
|
|
|
|
BrcdSwPackageUpgradeResultEntry::= SEQUENCE {
|
|
brcdSwPackageUpgradeResultIndex
|
|
Unsigned32,
|
|
brcdSwPackageUpgradeResultImageType
|
|
BrcdImageType,
|
|
brcdSwPackageUpgradeResultStatus
|
|
INTEGER,
|
|
brcdSwPackageUpgradeResultTimeStamp
|
|
TimeStamp,
|
|
brcdSwPackageUpgradeResultDescription
|
|
DisplayString
|
|
}
|
|
|
|
brcdSwPackageUpgradeResultIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequential index, or upgrade step."
|
|
::= { brcdSwPackageUpgradeResultEntry 1 }
|
|
|
|
brcdSwPackageUpgradeResultImageType OBJECT-TYPE
|
|
SYNTAX BrcdImageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The associated image type for this step of upgrade process."
|
|
::= { brcdSwPackageUpgradeResultEntry 2 }
|
|
|
|
brcdSwPackageUpgradeResultStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
downloadFailed(2),
|
|
installFailed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upgrade status for this particular image upgrade."
|
|
::= { brcdSwPackageUpgradeResultEntry 3 }
|
|
|
|
brcdSwPackageUpgradeResultTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timestamp when this upgrade step was performed."
|
|
::= { brcdSwPackageUpgradeResultEntry 4 }
|
|
|
|
brcdSwPackageUpgradeResultDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Summary description for this particular image upgrade.
|
|
This is empty when brcdSwPackageLoadResultStatus is 'ok'."
|
|
::= { brcdSwPackageUpgradeResultEntry 5 }
|
|
|
|
brcdSwIntfModAutoUpgradeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
disabled(2),
|
|
tftp(3),
|
|
slot1(4),
|
|
slot2(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode of LP Auto-upgrade.
|
|
<TBD: more description> "
|
|
::= { brcdSwIntfModAutoUpgrade 1 }
|
|
|
|
brcdSwIntfModAutoUpgradeTftpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2).
|
|
<TBD: more description>"
|
|
::= { brcdSwIntfModAutoUpgrade 2 }
|
|
|
|
brcdSwIntfModAutoUpgradeTftpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TFTP server IP address. <TBD: more description>"
|
|
::= { brcdSwIntfModAutoUpgrade 3 }
|
|
|
|
brcdSwIntfModAutoUpgradeSrcPath OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the path to the topmost directory of the release
|
|
package relative to the root directory.
|
|
If the source is a TFTP server, the root is the TFTP root.
|
|
If the source is slot1 or slot2, the root is top-level directory '/'"
|
|
::= { brcdSwIntfModAutoUpgrade 4 }
|
|
|
|
brcdSwIntfModAutoUpgradeAllImages OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to specify an all-image upgrade. If set to true(1),
|
|
the upgrade sequence will include the LP BOOT image.
|
|
Default is false(2), which will upgrade only the LP FPGA images.
|
|
For a read operation, this will return the configured value."
|
|
DEFVAL { false }
|
|
::= { brcdSwIntfModAutoUpgrade 5 }
|
|
|
|
END
|