653 lines
18 KiB
Plaintext
653 lines
18 KiB
Plaintext
FOUNDRY-SN-VSRP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
MODULE-IDENTITY, OBJECT-TYPE,IpAddress, Counter32,Integer32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
snSwitch
|
|
FROM FOUNDRY-SN-SWITCH-GROUP-MIB
|
|
;
|
|
|
|
snVsrp MODULE-IDENTITY
|
|
LAST-UPDATED "201006020000Z" -- 04 June 2010
|
|
ORGANIZATION "Brocade Communications Systems, Inc."
|
|
CONTACT-INFO
|
|
"Technical Support Center
|
|
130 Holger Way,
|
|
San Jose, CA 95134
|
|
Email: ipsupport@brocade.com
|
|
Phone: 1-800-752-8061
|
|
URL: www.brocade.com"
|
|
DESCRIPTION
|
|
"Copyright 1996-2010 Brocade Communications Systems, Inc.
|
|
All rights reserved.
|
|
This Brocade Communications Systems SNMP Management Information Base Specification
|
|
embodies Brocade Communications Systems' confidential and proprietary
|
|
intellectual property. Brocade Communications Systems retains all
|
|
title and ownership in the Specification, including any revisions.
|
|
|
|
This Specification is supplied AS IS, and Brocade Communications Systems makes
|
|
no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the specification, and any unintended
|
|
consequence it may on the user environment."
|
|
|
|
REVISION "201006020000Z" -- 04 June 2010
|
|
DESCRIPTION
|
|
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
|
|
|
|
REVISION "200909300000Z" -- September 30, 2009
|
|
DESCRIPTION
|
|
"convert from SMIv1 to SMIv2"
|
|
::= { snSwitch 21}
|
|
|
|
MacAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This data type is used to model media addresses. For many
|
|
types of media, this will be in a binary representation.
|
|
For example, an ethernet address would be represented as
|
|
a string of 6 octets.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
|
|
snVsrpGlobal OBJECT IDENTIFIER ::= { snVsrp 1 }
|
|
snVsrpIfIntf OBJECT IDENTIFIER ::= { snVsrp 2 }
|
|
snVsrpVirRtr OBJECT IDENTIFIER ::= { snVsrp 3 }
|
|
|
|
-- Section 1: VSRP Global Variables
|
|
|
|
snVsrpGroupOperModeVsrp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VSRP is configured on this system either enabled or
|
|
disabled and thedefault is disabled mode.
|
|
disabled(0)..........disable VSRP
|
|
enabled(1)...........activate VSRP"
|
|
::= { snVsrpGlobal 1 }
|
|
|
|
snVsrpIfStateChangeTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate VSRP interface state change
|
|
traps."
|
|
DEFVAL { enabled }
|
|
::= { snVsrpGlobal 2 }
|
|
|
|
snVsrpIfMaxNumVridPerIntf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum number of VRID per interface."
|
|
::= { snVsrpGlobal 3 }
|
|
|
|
snVsrpIfMaxNumVridPerSystem OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum number of VRID per system."
|
|
::= { snVsrpGlobal 4 }
|
|
|
|
snVsrpClearVrrpStat OBJECT-TYPE
|
|
SYNTAX INTEGER { normal(0), clear(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear VSRP statistics command."
|
|
::= { snVsrpGlobal 5 }
|
|
|
|
|
|
-- Section 2: VSRP Interface Table, new table with vlan_id as an index.
|
|
|
|
snVsrpIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVsrpIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VSRP Interface Table describes the interfaces from
|
|
the viewpoint of VSRP."
|
|
::= { snVsrpIfIntf 1 }
|
|
|
|
snVsrpIfEntry OBJECT-TYPE
|
|
SYNTAX SnVsrpIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VSRP Interface Entry describes one interface from
|
|
the viewpoint of VSRP."
|
|
INDEX { snVsrpIfVlanId}
|
|
::= { snVsrpIfTable 1 }
|
|
|
|
SnVsrpIfEntry ::=
|
|
SEQUENCE {
|
|
snVsrpIfVlanId
|
|
Integer32,
|
|
snVsrpIfAuthType
|
|
INTEGER,
|
|
snVsrpIfAuthPassword
|
|
OCTET STRING
|
|
}
|
|
|
|
snVsrpIfVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan index."
|
|
::= { snVsrpIfEntry 1 }
|
|
|
|
snVsrpIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuth(0),
|
|
simpleTextPasswd(1),
|
|
ipAuthHeader(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type of this interface."
|
|
::= { snVsrpIfEntry 2 }
|
|
|
|
snVsrpIfAuthPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The simple text password is allowed if only if
|
|
the snVsrpIfAuthType type is simpleTextPasswd and
|
|
the size should be greater than zero.
|
|
On reading this object, if the snVsrpIfAuthType type is
|
|
noAuth, then zero length string will be returned"
|
|
::= { snVsrpIfEntry 3 }
|
|
|
|
|
|
-- Section 3: VSRP Virtual Router Configuration Table
|
|
-- The vsrp Virtual Router Table augments with vsrp specific information.
|
|
|
|
snVsrpVirRtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVsrpVirRtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vsrp virtual router Entry describes one virtual router from
|
|
the viewpoint of vsrp."
|
|
::= { snVsrpVirRtr 1 }
|
|
|
|
snVsrpVirRtrEntry OBJECT-TYPE
|
|
SYNTAX SnVsrpVirRtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vsrp virtual router Entry describes one virtual router from
|
|
the viewpoint of vsrp."
|
|
INDEX { snVsrpVirRtrVlanId, snVsrpVirRtrId }
|
|
::= { snVsrpVirRtrTable 1 }
|
|
|
|
SnVsrpVirRtrEntry ::=
|
|
SEQUENCE {
|
|
snVsrpVirRtrVlanId
|
|
Integer32,
|
|
snVsrpVirRtrId
|
|
INTEGER,
|
|
snVsrpVirRtrOwnership
|
|
INTEGER,
|
|
snVsrpVirRtrCfgPriority
|
|
INTEGER,
|
|
snVsrpVirRtrTrackPriority
|
|
INTEGER,
|
|
snVsrpVirRtrCurrPriority
|
|
INTEGER,
|
|
snVsrpVirRtrHelloInt
|
|
INTEGER,
|
|
snVsrpVirRtrDeadInt
|
|
INTEGER,
|
|
snVsrpVirRtrPreemptMode
|
|
INTEGER,
|
|
snVsrpVirRtrState
|
|
INTEGER,
|
|
snVsrpVirRtrIpAddrMask
|
|
OCTET STRING,
|
|
snVsrpVirRtrActivate
|
|
INTEGER,
|
|
snVsrpVirRtrTrackPortList
|
|
OCTET STRING,
|
|
snVsrpVirRtrAdvertiseBackup
|
|
INTEGER,
|
|
snVsrpVirRtrHoldDownInt
|
|
INTEGER,
|
|
snVsrpVirRtrInitTtl
|
|
INTEGER,
|
|
snVsrpVirRtrIncPortList
|
|
OCTET STRING,
|
|
snVsrpVirRtrSave
|
|
INTEGER,
|
|
snVsrpVirRtrBackupInt
|
|
INTEGER,
|
|
snVsrpVirRtrRowStatus
|
|
INTEGER,
|
|
snVsrpVirRtrRxArpPktDropCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxIpPktDropCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxPortMismatchCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxNumOfIpMismatchCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxIpMismatchCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxHelloIntMismatchCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxPriorityZeroFromMasterCnts
|
|
Counter32,
|
|
snVsrpVirRtrRxHigherPriorityCnts
|
|
Counter32,
|
|
snVsrpVirRtrTransToMasterStateCnts
|
|
Counter32,
|
|
snVsrpVirRtrTransToBackupStateCnts
|
|
Counter32,
|
|
snVsrpVirRtrCurrDeadInt
|
|
Integer32,
|
|
snVsrpVirRtrCurHelloInt
|
|
INTEGER,
|
|
snVsrpVirRtrCurHoldDownInt
|
|
INTEGER,
|
|
snVsrpVirRtrCurInitTtl
|
|
INTEGER,
|
|
snVsrpVirRtrHelloMacAddress
|
|
MacAddress,
|
|
snVsrpVirRtrMasterIpAddr
|
|
IpAddress
|
|
}
|
|
|
|
snVsrpVirRtrVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan index."
|
|
::= { snVsrpVirRtrEntry 1 }
|
|
|
|
snVsrpVirRtrId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One of the virtual router ID of this vsrp interface."
|
|
::= { snVsrpVirRtrEntry 2 }
|
|
|
|
snVsrpVirRtrOwnership OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
incomplete(0),
|
|
owner(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ownership of this vsrp router interface
|
|
can be set to backup(2).
|
|
VirRtr SNMP-GET returns incomplete(0), it means
|
|
no IP address has assigned to this vsrp router interface."
|
|
::= { snVsrpVirRtrEntry 3 }
|
|
|
|
snVsrpVirRtrCfgPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The higher the number the higher the priority is.
|
|
This parameter decides which backup router should becomes
|
|
the Active Router for the interface. A backup Router with
|
|
higher priority selected to becomes the Active Router.
|
|
Therefore, this Object can be set if only if snVsrpVirRtrOwnership
|
|
is set to backup(2).
|
|
For NetIron platforms, the range is between 8 to 255."
|
|
DEFVAL { 100 }
|
|
::= { snVsrpVirRtrEntry 4 }
|
|
|
|
snVsrpVirRtrTrackPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The higher the number the higher the priority is.
|
|
after this object is configured, the snVsrpVirRtrCurrPriority
|
|
of this interface will be adjusted dynamically with this
|
|
track priority when the Track Port states first
|
|
changes from UP to DOWN."
|
|
::= { snVsrpVirRtrEntry 5 }
|
|
|
|
snVsrpVirRtrCurrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The higher the number the higher the priority is.
|
|
This object will be adjusted dynamically with the
|
|
track priority when the Track Port states first
|
|
changes from UP to DOWN."
|
|
::= { snVsrpVirRtrEntry 6 }
|
|
|
|
snVsrpVirRtrHelloInt OBJECT-TYPE
|
|
SYNTAX INTEGER (1..84)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval between advertisements (seconds)."
|
|
DEFVAL { 1 }
|
|
::= { snVsrpVirRtrEntry 7 }
|
|
|
|
snVsrpVirRtrDeadInt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..84)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval (seconds)."
|
|
::= { snVsrpVirRtrEntry 8 }
|
|
|
|
snVsrpVirRtrPreemptMode OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mode controls whether a higher priority Backup router
|
|
preempts a lower priority Master. The mode with enabled(1)
|
|
allow preemption and disabled(0) prohibit preemption."
|
|
DEFVAL { enabled }
|
|
::= { snVsrpVirRtrEntry 9 }
|
|
|
|
snVsrpVirRtrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init(0),
|
|
master(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the vsrp Router's interface state as:
|
|
init(0)...initialization state.
|
|
master(1)...master state.
|
|
backup(2)...backup state."
|
|
::= { snVsrpVirRtrEntry 10 }
|
|
|
|
snVsrpVirRtrIpAddrMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The numbers of IP Addresses of this virtual router of this
|
|
interface, this holds good for L3 vsrp."
|
|
::= { snVsrpVirRtrEntry 11 }
|
|
|
|
snVsrpVirRtrActivate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the vsrp Router's activate command as:
|
|
disabled(0)...deactivate this vsrp Router.
|
|
enabled(1)....activate this vsrp Router."
|
|
::= { snVsrpVirRtrEntry 12 }
|
|
|
|
snVsrpVirRtrTrackPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the identity of the physical port and virtual ports
|
|
whose state is to be monitored. Each port index is
|
|
an ifIndex, if there are consecutive 4 or more ifIndex then
|
|
they will be encoded like below.
|
|
Encoding and decoding scheme is range based:
|
|
Each range prefix with 0000 (2 octets) where 0000 is not valid
|
|
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
|
|
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
|
|
Ex:
|
|
port list: 0001..0005 0015 0032..0047
|
|
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f.
|
|
If this object is configured
|
|
then the Preference Level of this interface will be adjusted
|
|
dynamically depending on the state of the Track Port.
|
|
The interface's Preference Level is reduced by value of
|
|
Preference Level parameter when the Track Port states first
|
|
changes from UP to DOWN. When the Track Port next comes up
|
|
the interface's Preference Level is increased by the amount
|
|
specified by the Preference Level.
|
|
The router VSRP physical track port membership."
|
|
::= { snVsrpVirRtrEntry 13 }
|
|
|
|
snVsrpVirRtrAdvertiseBackup OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Advertise this backup router to master "
|
|
DEFVAL { disabled }
|
|
::= { snVsrpVirRtrEntry 14 }
|
|
|
|
snVsrpVirRtrHoldDownInt OBJECT-TYPE
|
|
SYNTAX INTEGER (1..84)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VSRP protection mechanism, an extra delay for a switch in
|
|
backup mode to upgrade itself to master mode"
|
|
DEFVAL { 2 }
|
|
::= { snVsrpVirRtrEntry 15 }
|
|
|
|
snVsrpVirRtrInitTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VSRP:TTL in the hello packet to regulate the distance that a hello packet
|
|
can travel. It prevents the flooding of VSRP hello packets in the network"
|
|
DEFVAL { 2 }
|
|
::= { snVsrpVirRtrEntry 16 }
|
|
|
|
snVsrpVirRtrIncPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include all free ports of the VLAN into its control ports"
|
|
::= { snVsrpVirRtrEntry 17 }
|
|
|
|
snVsrpVirRtrSave OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set VSRP to save current parameters value"
|
|
DEFVAL { disabled }
|
|
::= { snVsrpVirRtrEntry 18 }
|
|
|
|
snVsrpVirRtrBackupInt OBJECT-TYPE
|
|
SYNTAX INTEGER (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval between backup routers hello message advertisements (seconds)."
|
|
DEFVAL { 60 }
|
|
::= { snVsrpVirRtrEntry 19 }
|
|
|
|
snVsrpVirRtrRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an existing row
|
|
|
|
VirRtr the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVsrpVirRtrEntry 20}
|
|
|
|
snVsrpVirRtrRxArpPktDropCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received vsrp ARP Packet Drop Counts."
|
|
::= { snVsrpVirRtrEntry 21 }
|
|
|
|
snVsrpVirRtrRxIpPktDropCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received VSRP IP Packet Drop Counts."
|
|
::= { snVsrpVirRtrEntry 22 }
|
|
|
|
snVsrpVirRtrRxPortMismatchCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received vsrp Port mismatching Counts."
|
|
::= { snVsrpVirRtrEntry 23 }
|
|
|
|
snVsrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received VSRP Number of IP Addresses mismatching Counts."
|
|
::= { snVsrpVirRtrEntry 24 }
|
|
|
|
snVsrpVirRtrRxIpMismatchCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received vsrp IP Address mismatching Counts."
|
|
::= { snVsrpVirRtrEntry 25 }
|
|
|
|
snVsrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counts of the virtual router interface with hello interval mismatch counts."
|
|
::= { snVsrpVirRtrEntry 26 }
|
|
|
|
snVsrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counts of the virtual router interface with Priority zero from the master."
|
|
::= { snVsrpVirRtrEntry 27 }
|
|
|
|
snVsrpVirRtrRxHigherPriorityCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counts of the virtual router interface with higher Priority."
|
|
::= { snVsrpVirRtrEntry 28 }
|
|
|
|
snVsrpVirRtrTransToMasterStateCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counts of the virtual router interface transition to master state."
|
|
::= { snVsrpVirRtrEntry 29 }
|
|
|
|
snVsrpVirRtrTransToBackupStateCnts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counts of the virtual router interface transition to backup state."
|
|
::= { snVsrpVirRtrEntry 30 }
|
|
|
|
snVsrpVirRtrCurrDeadInt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Dead interval (in 100 milliseconds)."
|
|
::= { snVsrpVirRtrEntry 31 }
|
|
|
|
snVsrpVirRtrCurHelloInt OBJECT-TYPE
|
|
SYNTAX INTEGER (1..84)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set backup router hello interval"
|
|
::= { snVsrpVirRtrEntry 32 }
|
|
|
|
snVsrpVirRtrCurHoldDownInt OBJECT-TYPE
|
|
SYNTAX INTEGER (1..84)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VSRP protection mechanism, an extra delay for a switch in
|
|
backup mode to upgrade itself to master mode"
|
|
::= { snVsrpVirRtrEntry 33 }
|
|
|
|
snVsrpVirRtrCurInitTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VSRP:TTL in the hello packet to regulate the distance that a hello packet
|
|
can travel. It prevents the flooding of VSRP hello packets in the network"
|
|
::= { snVsrpVirRtrEntry 34 }
|
|
|
|
snVsrpVirRtrHelloMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello MAC address."
|
|
::= { snVsrpVirRtrEntry 35 }
|
|
|
|
snVsrpVirRtrMasterIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master router's real/virtual (primary) IP address. This is
|
|
the IP address listed as the source in vsrp advertisement
|
|
last received by this virtual router."
|
|
::= { snVsrpVirRtrEntry 36 }
|
|
|
|
|
|
END
|