10452 lines
280 KiB
Plaintext
10452 lines
280 KiB
Plaintext
-- $Log: E5-120-MIB.mib $
|
|
-- Revision 1.67 2011/04/28 03:38:13 Alex.Shih
|
|
-- Revision 1.66 2011/03/10 09:37:48 swee
|
|
-- Remove supported in R5.x or later version info
|
|
-- Revision 1.65 2011/02/09 00:24:59 Alex.Shih
|
|
-- Revision 1.65 2011/02/09 00:09:50 Alex.Shih
|
|
-- Revision 1.64 2011/01/27 09:24:10 Alex.Shih
|
|
-- Revision 1.63 2011/01/24 06:02:44 Alex.Shih
|
|
-- Revision 1.62 2011/01/07 07:32:03 cylien
|
|
-- fix compile error of mibble
|
|
-- Revision 1.61 2010/11/15 11:01:01 Alex.Shih
|
|
-- Revision 1.60 2010/11/12 02:58:57 cylien
|
|
-- Revision 1.59 2010/11/03 11:00:56 john
|
|
-- Revision 1.58 2010/10/26 01:35:33 DavidGong
|
|
-- Revision 1.57 2010/10/25 10:07:59 Alex.Shih
|
|
-- Revision 1.56 2010/10/14 08:58:32 cylien
|
|
-- Revision 1.55 2010/09/30 08:23:27 Alex.Shih
|
|
-- Revision 1.54 2010/09/30 04:12:02 cylien
|
|
-- Revision 1.53 2010/09/29 02:29:27 cylien
|
|
-- Revision 1.52 2010/09/29 01:18:50 john
|
|
-- Revision 1.51 2010/09/28 01:01:45 DavidGong
|
|
-- Revision 1.50 2010/09/23 07:59:17 cylien
|
|
-- Revision 1.49 2010/09/16 10:34:06 DavidGong
|
|
-- Revision 1.48 2010/09/08 07:02:34 Alex.Shih
|
|
-- Revision 1.47 2010/09/08 03:47:53 Alex.Shih
|
|
-- Revision 1.46 2010/08/27 09:00:40 John
|
|
-- Revision 1.45 2010/08/27 05:45:47 Alex.Shih
|
|
-- Revision 1.44 2010/08/10 07:47:54 Alex.Shih
|
|
-- Revision 1.43 2010/07/19 05:35:13 John
|
|
-- Revision 1.42 2010/07/17 05:59:03 Alex.Shih
|
|
-- Revision 1.41 2010/07/16 09:19:43 cylien
|
|
-- Revision 1.40 2010/07/09 11:03:17 John
|
|
-- Revision 1.39 2010/07/01 11:38:20 davidgong
|
|
-- Revision 1.38 2010/07/01 11:12:01 davidgong
|
|
-- Revision 1.37 2010/06/30 07:01:19 Alex.Shih
|
|
-- Revision 1.36 2010/06/29 06:43:44 Alex.Shih
|
|
-- Revision 1.35 2010/06/28 17:05:02 John
|
|
-- Revision 1.33 2010/06/24 07:47:21 davidgong
|
|
-- Revision 1.32 2010/06/24 05:28:14 davidgong
|
|
-- Revision 1.31 2010/06/08 03:52:08 cylien
|
|
-- Revision 1.30 2010/06/07 00:57:38 davidgong
|
|
-- Revision 1.29 2010/06/03 12:06:07 JeFF
|
|
-- Revision 1.28 2010/06/02 01:18:24 Alex.Shih
|
|
-- Revision 1.27 2010/05/21 03:57:37 maverick
|
|
-- Revision 1.26 2010/04/23 10:46:29 maverick
|
|
-- Revision 1.25 2009/11/26 13:06:56 maverick
|
|
-- add comment to obsoleted mib entries, mibble checked
|
|
-- Revision 1.24 2009/09/15 05:51:30 maverick
|
|
-- Revision 1.23 2009/07/27 08:16:55 niceguy
|
|
-- Revision 1.22 2009/07/10 10:39:39 maverick
|
|
-- Revision 1.21 2009/06/26 11:01:55 John
|
|
-- Revision 1.20 2009/06/25 02:47:25 niceguy
|
|
-- Revision 1.19 2009/06/10 02:26:38 John
|
|
-- Revision 1.18 2009/05/21 12:28:27 maverick
|
|
-- Revision 1.17 2009/05/21 04:05:18 John
|
|
-- Revision 1.16 2009/05/20 13:04:20 maverick
|
|
-- Revision 1.15 2009/05/20 00:58:57 maverick
|
|
-- Revision 1.14 2009/04/29 09:45:26 Ives
|
|
-- Revision 1.13 2009/04/29 05:51:21 niceguy
|
|
-- Revision 1.12 2009/04/21 12:25:22 Ives
|
|
-- Revision 1.10 2008/11/12 08:19:34 kenny
|
|
-- Revision 1.9 2008/09/26 10:45:17 niceguy
|
|
-- Revision 1.8 2008/09/26 05:51:34 maverick
|
|
-- Revision 1.7 2008/09/16 08:11:26 kenny
|
|
-- Revision 1.6 2008/08/25 07:12:03 kenny
|
|
-- Revision 1.5 2008/08/21 10:55:19 kenny
|
|
-- Revision 1.4 2008/08/15 10:29:16 maverick
|
|
-- Revision 1.3 2008/08/05 06:35:53 maverick
|
|
-- Revision 1.2 2008/08/04 12:47:34 maverick
|
|
-- Revision 1.1 2008/07/11 09:36:15 maverick
|
|
-- Initial revision
|
|
-- Revision 1.7 2008/06/27 16:08:09 maverick
|
|
-- Revision 1.6 2008/06/23 08:54:10 kenny
|
|
-- Revision 1.5 2008/06/10 13:53:03 maverick
|
|
-- Revision 1.4 2008/05/30 14:12:22 maverick
|
|
-- Revision 1.3 2008/05/20 02:55:59 maverick
|
|
-- Revision 1.2 2008/05/13 02:03:13 maverick
|
|
-- Revision 1.6 2008/03/07 07:56:43 kenny
|
|
-- Revision 1.5 2007/12/14 10:00:11 niceguy
|
|
-- Revision 1.4 2007/12/14 02:42:41 niceguy
|
|
-- Revision 1.3 2007/12/06 02:03:04 kenny
|
|
-- Revision 1.2 2007/12/03 01:54:35 niceguy
|
|
-- Revision 1.1 2007/12/03 01:45:30 niceguy
|
|
-- Initial revision
|
|
-- Initial revision
|
|
|
|
|
|
E5-120-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
enterprises
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE, Counter32, Gauge32, Unsigned32, Counter64, IpAddress, TimeTicks, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString, PhysAddress, ifIndex
|
|
FROM RFC1213-MIB
|
|
RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
VlanIndex, PortList, dot1qVlanIndex
|
|
FROM Q-BRIDGE-MIB
|
|
dot1dTrafficClass
|
|
FROM P-BRIDGE-MIB
|
|
MacAddress, Timeout, BridgeId, dot1dBasePort
|
|
FROM BRIDGE-MIB
|
|
dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier
|
|
FROM IEEE8021-CFMD8-MIB;
|
|
|
|
|
|
calixNetworks OBJECT IDENTIFIER ::= { enterprises 6321 }
|
|
calixRegistrations OBJECT IDENTIFIER ::= { calixNetworks 1 }
|
|
calixProducts OBJECT IDENTIFIER ::= { calixRegistrations 2 }
|
|
e5x100 OBJECT IDENTIFIER ::= { calixProducts 3 }
|
|
e5x120 OBJECT IDENTIFIER ::= { e5x100 3 }
|
|
|
|
|
|
|
|
alarmconf OBJECT IDENTIFIER ::= { e5x120 2 }
|
|
diagnostic OBJECT IDENTIFIER ::= { e5x120 4 }
|
|
multicast OBJECT IDENTIFIER ::= { e5x120 7 }
|
|
port OBJECT IDENTIFIER ::= { e5x120 8 }
|
|
profile OBJECT IDENTIFIER ::= { e5x120 9 }
|
|
switch OBJECT IDENTIFIER ::= { e5x120 10 }
|
|
sys OBJECT IDENTIFIER ::= { e5x120 11 }
|
|
trap OBJECT IDENTIFIER ::= { e5x120 12 }
|
|
statistics OBJECT IDENTIFIER ::= { e5x120 13 }
|
|
clear OBJECT IDENTIFIER ::= { e5x120 14 }
|
|
aesSeriesCommon OBJECT IDENTIFIER ::= { e5x120 97 } -- obsoleted since R2.0 by maverick
|
|
iesSeriesCommon OBJECT IDENTIFIER ::= { e5x120 98 }
|
|
accessSwitchCommonATM OBJECT IDENTIFIER ::= { e5x120 99 }
|
|
|
|
|
|
|
|
----------------------------------------
|
|
-- alarmconf
|
|
----------------------------------------
|
|
|
|
alarmOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The manager sets the corresponding bit value to 1 to start the operation
|
|
and the agent clears the object to zero when the operation is successfully completed.
|
|
The various bit positions are:
|
|
BIT 1: clear
|
|
BIT 2: cutoff"
|
|
::= { alarmconf 1 }
|
|
|
|
-- Alarm Conf Table
|
|
|
|
alarmConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlarmConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes alarm configuration."
|
|
::= { alarmconf 2 }
|
|
|
|
alarmConfEntry OBJECT-TYPE
|
|
SYNTAX AlarmConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in alarmConfTable."
|
|
INDEX { alarmConfId }
|
|
::= { alarmConfTable 1 }
|
|
|
|
AlarmConfEntry ::=
|
|
SEQUENCE {
|
|
alarmConfId INTEGER,
|
|
alarmConfFacility INTEGER,
|
|
alarmConfTarget INTEGER,
|
|
alarmConfSeverity INTEGER,
|
|
alarmConfClearable INTEGER
|
|
}
|
|
|
|
alarmConfId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
5000:vdslLine_up
|
|
5001:vdslLine_down
|
|
5002:vdsl_tca_lol
|
|
5003:vdsl_tca_lof
|
|
5004:vdsl_tca_los
|
|
5005:vdsl_tca_lop
|
|
5006:vdsl_tca_es
|
|
5007:vdsl_tca_ses
|
|
5008:vdsl_tca_uas
|
|
5009:xd_xtuc_loftrap
|
|
5010:xd_xtuc_lostrap
|
|
5011:xd_xtur_loftrap
|
|
5012:xd_xtur_lostrap
|
|
5013:xd_xtur_lprtrap
|
|
5014:ad_dhcp_rt_full
|
|
5015:ad_dhcp_dm_conflict
|
|
5016:ad_dhcp_entry_full
|
|
5017:ad_dhcp_ip_dup
|
|
5018:ad_dhcp_mac_dup
|
|
10000:eqptVol_err
|
|
10001:eqptEqpttemp_err
|
|
10002:eqptFan_err
|
|
10003:eqptHw_rtc_fail
|
|
10004:eqptHw_mon_fail
|
|
10005:eqptCold_start
|
|
10006:eqptWarm_start
|
|
10007:eqptAlm_input
|
|
10008:eqptAlm_input2
|
|
10009:eqptAlm_input3
|
|
15000:sysReboot
|
|
15001:sysAco
|
|
15002:sysAlm_clear
|
|
15003:sysLogin_fail
|
|
15004:sysAnti_spoofing
|
|
15005:sysAlm_svrty_change
|
|
15006:sysHost_terminate
|
|
20000:enetUp
|
|
20001:enetDown
|
|
30000:cfmError
|
|
"
|
|
::= { alarmConfEntry 1 }
|
|
|
|
alarmConfFacility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local1(1),
|
|
local2(2),
|
|
local3(3),
|
|
local4(4),
|
|
local5(5),
|
|
local6(6),
|
|
local7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm facility."
|
|
::= { alarmConfEntry 2 }
|
|
|
|
alarmConfTarget OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination which alarms are reported to. Set the bit to 1 to enable the target.
|
|
BIT 1: snmp trap
|
|
BIT 2: syslog"
|
|
::= { alarmConfEntry 3 }
|
|
|
|
alarmConfSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
info(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm severity"
|
|
::= { alarmConfEntry 4 }
|
|
|
|
alarmConfClearable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clearable(1),
|
|
unclearable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear."
|
|
::= { alarmConfEntry 5 }
|
|
|
|
-- Alarm Current Table
|
|
|
|
alarmCurrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlarmCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes current alarm information."
|
|
::= { alarmconf 3 }
|
|
|
|
alarmCurrEntry OBJECT-TYPE
|
|
SYNTAX AlarmCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in alarmCurrTable."
|
|
INDEX { alarmCurrIndex }
|
|
::= { alarmCurrTable 1 }
|
|
|
|
AlarmCurrEntry ::=
|
|
SEQUENCE {
|
|
alarmCurrIndex INTEGER,
|
|
alarmCurrOccurTime TimeTicks,
|
|
alarmCurrTrapOid OBJECT IDENTIFIER,
|
|
alarmCurrParam1 INTEGER,
|
|
alarmCurrParam2 INTEGER,
|
|
alarmCurrParam3 INTEGER,
|
|
alarmCurrParam4 INTEGER,
|
|
alarmCurrParam5 INTEGER,
|
|
alarmCurrParam6 INTEGER,
|
|
alarmCurrParam7 INTEGER,
|
|
alarmCurrParam8 INTEGER,
|
|
alarmCurrTimeDescr DisplayString,
|
|
alarmCurrSeverity INTEGER,
|
|
alarmCurrDescr DisplayString
|
|
}
|
|
|
|
alarmCurrIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the alarm."
|
|
::= { alarmCurrEntry 1 }
|
|
|
|
alarmCurrOccurTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm occurence time (in hundredths of a second) since the system was last re-initialized."
|
|
::= { alarmCurrEntry 2 }
|
|
|
|
alarmCurrTrapOid OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap OID of the alarm."
|
|
::= { alarmCurrEntry 3 }
|
|
|
|
alarmCurrParam1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1st parameter of the alarm."
|
|
::= { alarmCurrEntry 4 }
|
|
|
|
alarmCurrParam2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 2nd parameter of the alarm."
|
|
::= { alarmCurrEntry 5 }
|
|
|
|
alarmCurrParam3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 3rd parameter of the alarm."
|
|
::= { alarmCurrEntry 6 }
|
|
|
|
alarmCurrParam4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 4th parameter of the alarm."
|
|
::= { alarmCurrEntry 7 }
|
|
|
|
alarmCurrParam5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 5th parameter of the alarm."
|
|
::= { alarmCurrEntry 8 }
|
|
|
|
alarmCurrParam6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 6th parameter of the alarm."
|
|
::= { alarmCurrEntry 9 }
|
|
|
|
alarmCurrParam7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 7th parameter of the alarm."
|
|
::= { alarmCurrEntry 10 }
|
|
|
|
alarmCurrParam8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 8th parameter of the alarm."
|
|
::= { alarmCurrEntry 11 }
|
|
|
|
alarmCurrTimeDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string representation of occurence time (YYYY/MM/DD HH:MM:SS)."
|
|
::= { alarmCurrEntry 12 }
|
|
|
|
alarmCurrSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
info(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity of the alarm."
|
|
::= { alarmCurrEntry 13 }
|
|
|
|
alarmCurrDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of the alarm."
|
|
::= { alarmCurrEntry 14 }
|
|
|
|
-- Alarm Severity Port Table
|
|
|
|
alarmSeverityPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlarmSeverityPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the configuration of alarm reporting severity threshold for each port."
|
|
::= { alarmconf 4 }
|
|
|
|
alarmSeverityPortEntry OBJECT-TYPE
|
|
SYNTAX AlarmSeverityPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in alarmSeverityPortTable."
|
|
INDEX { ifIndex }
|
|
::= { alarmSeverityPortTable 1 }
|
|
|
|
AlarmSeverityPortEntry ::=
|
|
SEQUENCE {
|
|
severityThresh INTEGER
|
|
}
|
|
|
|
severityThresh OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
info(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum alarm severity that is reported."
|
|
::= { alarmSeverityPortEntry 1 }
|
|
|
|
----------------------------------------
|
|
-- diagnostic
|
|
----------------------------------------
|
|
|
|
selt OBJECT IDENTIFIER ::= { diagnostic 3 }
|
|
ldm OBJECT IDENTIFIER ::= { diagnostic 4 }
|
|
|
|
|
|
--------------------
|
|
-- selt
|
|
--------------------
|
|
|
|
seltTarget OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the port which would be performed single end loopback test."
|
|
::= { selt 1 }
|
|
|
|
seltOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The manager sets the object to 1 to start the selt
|
|
and the agent clears the object to zero when selt is successfully completed."
|
|
::= { selt 2 }
|
|
|
|
seltStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status description of the selt result."
|
|
::= { selt 3 }
|
|
|
|
seltCableType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
awg24(1),
|
|
awg26(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cable type that selt result indicates."
|
|
::= { selt 4 }
|
|
|
|
seltLoopEstimateLengthFt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "feet"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated loop length that selt result indicates."
|
|
::= { selt 5 }
|
|
|
|
seltLoopEstimateLengthMeter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "meter"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated loop length that selt result indicates."
|
|
::= { selt 6 }
|
|
|
|
--------------------
|
|
-- ldm
|
|
--------------------
|
|
|
|
ldmTarget OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the port which would be performed ldm test."
|
|
::= { ldm 1 }
|
|
|
|
ldmOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The manager sets the object to 1 to start the ldm test
|
|
and the agent clears the object to zero when ldm test is successfully completed."
|
|
::= { ldm 2 }
|
|
|
|
ldmStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status description of ldm test result."
|
|
::= { ldm 3 }
|
|
|
|
ldmXtucLoopAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loop Attenuation."
|
|
::= { ldm 4 }
|
|
|
|
ldmXtucSignalAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Attenuation."
|
|
::= { ldm 5 }
|
|
|
|
ldmXtucSignalMargin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Margin."
|
|
::= { ldm 6 }
|
|
|
|
ldmXtucAggregateTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual Aggregate Transmit Power."
|
|
::= { ldm 7 }
|
|
|
|
ldmXtucAttainableBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bits per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attainable Bit Rate."
|
|
::= { ldm 8 }
|
|
|
|
ldmXturLoopAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loop Attenuation."
|
|
::= { ldm 9 }
|
|
|
|
ldmXturSignalAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Attenuation."
|
|
::= { ldm 10 }
|
|
|
|
ldmXturSignalMargin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Margin."
|
|
::= { ldm 11 }
|
|
|
|
ldmXturAggregateTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual Aggregate Transmit Power."
|
|
::= { ldm 12 }
|
|
|
|
ldmXturAttainableBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bits per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attainable Bit Rate."
|
|
::= { ldm 13 }
|
|
|
|
ldmXtucNumOfSubcarriersPerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of subcarriers per port for ATU-C."
|
|
::= { ldm 14 }
|
|
|
|
ldmXturNumOfSubcarriersPerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of subcarriers per port for ATU-R."
|
|
::= { ldm 15 }
|
|
|
|
ldmXtucHlinScale OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scale of Hlin."
|
|
::= { ldm 16 }
|
|
|
|
ldmXtucHlinReal1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides real part of Hlin for the first 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 17 }
|
|
|
|
ldmXtucHlinReal2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides real part of Hlin for the last 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 18 }
|
|
|
|
ldmXtucHlinImage1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides image part of Hlin for the first 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 19 }
|
|
|
|
ldmXtucHlinImage2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides image part of Hlin for the last 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 20 }
|
|
|
|
ldmXtucHlog1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Hlog for the first 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 21 }
|
|
|
|
ldmXtucHlog2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Hlog for the last 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 22 }
|
|
|
|
ldmXtucQln1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides QLN for the first 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 23 }
|
|
|
|
ldmXtucQln2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides QLN for the last 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 24 }
|
|
|
|
ldmXtucSnr1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides SNR for the first 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 25 }
|
|
|
|
ldmXtucSnr2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides SNR for the last 256 subcarriers.
|
|
Each subcarrier takes two octets to store the value."
|
|
::= { ldm 26 }
|
|
|
|
ldmXturHlinScale OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scale of Hlin."
|
|
::= { ldm 27 }
|
|
|
|
ldmXturHlinReal OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Real part of Hlin. Each subcarrier takes two octets to store the value."
|
|
::= { ldm 28 }
|
|
|
|
ldmXturHlinImage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Image part of Hlin. Each subcarrier takes two octets to store the value."
|
|
::= { ldm 29 }
|
|
|
|
ldmXturHlog OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hlog of subcarrier. Each subcarrier takes two octets to store the value."
|
|
::= { ldm 30 }
|
|
|
|
ldmXturQln OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QLN of subcarrier. Each subcarrier takes two octets to store the value."
|
|
::= { ldm 31 }
|
|
|
|
ldmXturSnr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR of subcarrier. Each subcarrier takes two octets to store the value."
|
|
::= { ldm 32 }
|
|
|
|
ldmXtucHlogGroupFactor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hlog group factor of ATU-C."
|
|
::= { ldm 33 }
|
|
|
|
ldmXtucQlnGroupFactor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qln group factor of ATU-C."
|
|
::= { ldm 34 }
|
|
|
|
ldmXtucSnrGroupFactor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Snr group factor of ATU-C."
|
|
::= { ldm 35 }
|
|
|
|
ldmXturHlogGroupFactor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hlog group factor of ATU-R."
|
|
::= { ldm 36 }
|
|
|
|
ldmXturQlnGroupFactor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qln group factor of ATU-R."
|
|
::= { ldm 37 }
|
|
|
|
ldmXturSnrGroupFactor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Snr group factor of ATU-R."
|
|
::= { ldm 38 }
|
|
|
|
----------------------------------------
|
|
-- multicast
|
|
----------------------------------------
|
|
-- Obsoleted in calix MRD20 since Revision 1.20 at 2009/06/25 by niceguy
|
|
-- Object mcastBandwidth, igmpCount below is kept for e5-110 R1.x below. Not used for R2.x and above.
|
|
mcastBandwidth OBJECT IDENTIFIER ::= { multicast 4 }
|
|
igmpCount OBJECT IDENTIFIER ::= { multicast 5 }
|
|
mvlan OBJECT IDENTIFIER ::= { multicast 6 }
|
|
queryVid OBJECT IDENTIFIER ::= { multicast 7 }
|
|
igmpTimer OBJECT IDENTIFIER ::= { multicast 11 }
|
|
auditQuery OBJECT IDENTIFIER ::= { multicast 12 }
|
|
igmpProfile OBJECT IDENTIFIER ::= { multicast 13 }
|
|
|
|
igmpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enableProxy(1),
|
|
enableSnooping(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable IGMP protocol."
|
|
::= { multicast 1 }
|
|
|
|
igmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v2(1),
|
|
v3(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting IGMP version."
|
|
::= { multicast 9 }
|
|
|
|
igmpLeaveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
immediateLeave(1),
|
|
lastMemberQuery(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure IGMP leave message handling mode."
|
|
::= { multicast 10 }
|
|
|
|
--------------------
|
|
-- bandwidth
|
|
--------------------
|
|
-- removed in calix MRD20
|
|
-- To support multiple version of E5-1xx (Currently R1.x and R2.x), we keep all those useful entries in the MIB
|
|
mcastDefaultBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100000)
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default bandwidth requirement for a multicast channel."
|
|
::= { mcastBandwidth 1 }
|
|
|
|
maxNumOfMcastBw OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of row entries that user can create in mcastBwTable."
|
|
::= { mcastBandwidth 2 }
|
|
|
|
-- mcastBwTable
|
|
|
|
mcastBwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF McastBwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines bandwidth budget for a range of multicast IP channels."
|
|
::= { mcastBandwidth 3 }
|
|
|
|
mcastBwEntry OBJECT-TYPE
|
|
SYNTAX McastBwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of mcastBwTable."
|
|
INDEX { mcastBwIndex, mcastBwStartIp, mcastBwEndIp }
|
|
::= { mcastBwTable 1 }
|
|
|
|
McastBwEntry ::=
|
|
SEQUENCE {
|
|
mcastBwIndex INTEGER,
|
|
mcastBwStartIp IpAddress,
|
|
mcastBwEndIp IpAddress,
|
|
mcastBwBandwidth INTEGER,
|
|
mcastBwRowStatus RowStatus
|
|
}
|
|
|
|
mcastBwIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index which specify the entry."
|
|
::= { mcastBwEntry 1 }
|
|
|
|
mcastBwStartIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start multicast IP of the bandwidth control range."
|
|
::= { mcastBwEntry 2 }
|
|
|
|
mcastBwEndIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end multicast IP of the bandwidth control range."
|
|
::= { mcastBwEntry 3 }
|
|
|
|
mcastBwBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bandwidth budget for the multicast IP channels."
|
|
::= { mcastBwEntry 4 }
|
|
|
|
mcastBwRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of the entry."
|
|
::= { mcastBwEntry 5 }
|
|
|
|
-- mcastBwPortTable
|
|
|
|
mcastBwPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF McastBwPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specify the multicast bandwidth control of the port."
|
|
::= { mcastBandwidth 4 }
|
|
|
|
mcastBwPortEntry OBJECT-TYPE
|
|
SYNTAX McastBwPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of mcastBwPortTable."
|
|
INDEX { ifIndex }
|
|
::= { mcastBwPortTable 1 }
|
|
|
|
McastBwPortEntry ::=
|
|
SEQUENCE {
|
|
mcastBwPortEnable INTEGER,
|
|
mcastBwPortBandwidth INTEGER
|
|
}
|
|
|
|
mcastBwPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable multicast bandwidth control for a port."
|
|
::= { mcastBwPortEntry 1 }
|
|
|
|
mcastBwPortBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set bandwidth threshold for a port."
|
|
::= { mcastBwPortEntry 2 }
|
|
|
|
--------------------
|
|
-- igmpCount
|
|
--------------------
|
|
-- removed in calix MRD20
|
|
-- To support multiple version of E5-1xx (Currently R1.x and R2.x), we keep all those useful entries in the MIB
|
|
igmpCountPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpCountPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specify the IGMP count limiting of the port."
|
|
::= { igmpCount 1 }
|
|
|
|
igmpCountPortEntry OBJECT-TYPE
|
|
SYNTAX IgmpCountPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of igmpCountPortTable."
|
|
INDEX { ifIndex }
|
|
::= { igmpCountPortTable 1 }
|
|
|
|
IgmpCountPortEntry ::=
|
|
SEQUENCE {
|
|
igmpCountPortEnable INTEGER,
|
|
igmpCountPortLimit INTEGER
|
|
}
|
|
|
|
igmpCountPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable IGMP count limiting for a port."
|
|
::= { igmpCountPortEntry 1 }
|
|
|
|
igmpCountPortLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum allowed IGMP report count for a port."
|
|
::= { igmpCountPortEntry 2 }
|
|
|
|
--------------------
|
|
-- mvlan
|
|
--------------------
|
|
|
|
maxNumOfMvlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of row entries that user can create in mvlanTable."
|
|
::= { mvlan 1 }
|
|
|
|
-- mvlanTable
|
|
|
|
mvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing static configuration information for
|
|
each multicast VLAN configured into the device."
|
|
::= { mvlan 2 }
|
|
|
|
mvlanEntry OBJECT-TYPE
|
|
SYNTAX MvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of mvlanTable."
|
|
INDEX { mvlanIndex }
|
|
::= { mvlanTable 1 }
|
|
|
|
MvlanEntry ::=
|
|
SEQUENCE {
|
|
mvlanIndex VlanIndex,
|
|
mvlanName DisplayString,
|
|
mvlanEgressPorts PortList,
|
|
mvlanUntaggedPorts PortList,
|
|
mvlanRowStatus RowStatus
|
|
}
|
|
|
|
mvlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID refering to this VLAN."
|
|
::= { mvlanEntry 1 }
|
|
|
|
mvlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively assigned string, which may be used to identify the VLAN."
|
|
::= { mvlanEntry 2 }
|
|
|
|
mvlanEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are permanently assigned to the
|
|
egress list for this multicast VLAN."
|
|
::= { mvlanEntry 3 }
|
|
|
|
mvlanUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which should transmit egress packets
|
|
for this multicast VLAN as untagged."
|
|
::= { mvlanEntry 4 }
|
|
|
|
mvlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { mvlanEntry 5 }
|
|
|
|
-- mvlanTranslateTable
|
|
|
|
mvlanTranslateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MvlanTranslateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains multicast to VLAN translation."
|
|
::= { mvlan 3 }
|
|
|
|
mvlanTranslateEntry OBJECT-TYPE
|
|
SYNTAX MvlanTranslateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of mvlanTranslateTable."
|
|
INDEX { dot1qVlanIndex, mvlanTranslateIndex }
|
|
::= { mvlanTranslateTable 1 }
|
|
|
|
MvlanTranslateEntry ::=
|
|
SEQUENCE {
|
|
mvlanTranslateIndex INTEGER,
|
|
mvlanTranslateStartIp IpAddress,
|
|
mvlanTranslateEndIp IpAddress
|
|
}
|
|
|
|
mvlanTranslateIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index which specif the entry."
|
|
::= { mvlanTranslateEntry 1 }
|
|
|
|
mvlanTranslateStartIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start IP of the multicast VLAN translation."
|
|
::= { mvlanTranslateEntry 2 }
|
|
|
|
mvlanTranslateEndIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end IP of the multicast VLAN translation."
|
|
::= { mvlanTranslateEntry 3 }
|
|
|
|
--------------------
|
|
-- queryVid
|
|
--------------------
|
|
|
|
maxNumOfQryVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of row entries that user can create in qryVidConfTable."
|
|
::= { queryVid 1 }
|
|
|
|
-- qryVidConfTable
|
|
|
|
qryVidConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QryVidConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines statically set VLANs used for response IGMP report."
|
|
::= { queryVid 2 }
|
|
|
|
qryVidConfEntry OBJECT-TYPE
|
|
SYNTAX QryVidConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in qryVidConfTable."
|
|
INDEX { qryVid }
|
|
::= { qryVidConfTable 1 }
|
|
|
|
QryVidConfEntry ::=
|
|
SEQUENCE {
|
|
qryVid INTEGER,
|
|
qryVidRowStatus RowStatus
|
|
}
|
|
|
|
qryVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID."
|
|
::= { qryVidConfEntry 1 }
|
|
|
|
qryVidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { qryVidConfEntry 2 }
|
|
|
|
-- qryVidStatusTable
|
|
|
|
qryVidStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QryVidStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows statically set or dynamically learned VLANs used for response IGMP report."
|
|
::= { queryVid 3 }
|
|
|
|
qryVidStatusEntry OBJECT-TYPE
|
|
SYNTAX QryVidStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in qryVidStatusTable."
|
|
INDEX { qryVid }
|
|
::= { qryVidStatusTable 1 }
|
|
|
|
QryVidStatusEntry ::=
|
|
SEQUENCE {
|
|
qryVidType INTEGER
|
|
}
|
|
|
|
qryVidType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN type."
|
|
::= { qryVidStatusEntry 1 }
|
|
|
|
--------------------
|
|
-- igmpTimer
|
|
--------------------
|
|
|
|
igmpQryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (10..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IGMP query interval, 10~1000 in seconds."
|
|
::= { igmpTimer 1 }
|
|
|
|
igmpRobust OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IGMP query Robustness, 1~5."
|
|
::= { igmpTimer 2 }
|
|
|
|
igmpQryRespInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IGMP query response interval, 1~100 in 100 milliseconds."
|
|
::= { igmpTimer 3 }
|
|
|
|
igmpLastMemQryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IGMP Last Member Query interval, 1~5 in 100 milliseconds."
|
|
::= { igmpTimer 4 }
|
|
|
|
igmpLastMemQryRobust OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Last Member Query Robustness, 1~5."
|
|
::= { igmpTimer 5 }
|
|
|
|
--------------------
|
|
-- auditQuery
|
|
--------------------
|
|
|
|
auditQryEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable IGMP audit query."
|
|
::= { auditQuery 1 }
|
|
|
|
auditQryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IGMP Audit Query Interval, 1~4 in 100 milliseconds."
|
|
::= { auditQuery 2 }
|
|
|
|
auditQryRobust OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IGMP Audit Query Robustness, 1~5."
|
|
::= { auditQuery 3 }
|
|
|
|
--------------------
|
|
-- igmpProfile
|
|
--------------------
|
|
|
|
maxNumberOfIgmpProfiles OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max number of IGMP profiles in the system."
|
|
::= { igmpProfile 1 }
|
|
|
|
igmpProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains IGMP Profiles."
|
|
::= { igmpProfile 2 }
|
|
|
|
igmpProfileEntry OBJECT-TYPE
|
|
SYNTAX IgmpProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of IGMP Profile table."
|
|
INDEX {IMPLIED igmpProfileName }
|
|
::= { igmpProfileTable 1 }
|
|
|
|
IgmpProfileEntry ::=
|
|
SEQUENCE {
|
|
igmpProfileName DisplayString,
|
|
igmpProfileEnable INTEGER,
|
|
igmpProfileMaxGroup INTEGER,
|
|
igmpProfileRowStatus RowStatus
|
|
}
|
|
|
|
igmpProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP Profile name."
|
|
::= { igmpProfileEntry 1 }
|
|
|
|
igmpProfileEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable IGMP Profile."
|
|
::= { igmpProfileEntry 2 }
|
|
|
|
igmpProfileMaxGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set maximum allowed multicast group, 1~64."
|
|
::= { igmpProfileEntry 3 }
|
|
|
|
igmpProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of the IGMP Profile entry."
|
|
::= { igmpProfileEntry 4 }
|
|
|
|
igmpFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains IGMP Filters."
|
|
::= { igmpProfile 3 }
|
|
|
|
igmpFilterEntry OBJECT-TYPE
|
|
SYNTAX IgmpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of IGMP Filter table."
|
|
INDEX { igmpProfileName, igmpFilterIndex }
|
|
::= { igmpFilterTable 1 }
|
|
|
|
IgmpFilterEntry ::=
|
|
SEQUENCE {
|
|
igmpFilterIndex INTEGER,
|
|
igmpFilterStartIp IpAddress,
|
|
igmpFilterEndIp IpAddress
|
|
}
|
|
|
|
igmpFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index which specifies the filter rule."
|
|
::= { igmpFilterEntry 1 }
|
|
|
|
igmpFilterStartIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start IP of the filter rule."
|
|
::= { igmpFilterEntry 2 }
|
|
|
|
igmpFilterEndIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end IP of the filter rule."
|
|
::= { igmpFilterEntry 3 }
|
|
|
|
igmpProfilePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpProfilePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the IGMP Profile of the port."
|
|
::= { igmpProfile 4 }
|
|
|
|
igmpProfilePortEntry OBJECT-TYPE
|
|
SYNTAX IgmpProfilePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in igmpProfilePortTable."
|
|
INDEX { ifIndex }
|
|
::= { igmpProfilePortTable 1 }
|
|
|
|
IgmpProfilePortEntry ::=
|
|
SEQUENCE {
|
|
igmpProfilePortProfile OCTET STRING
|
|
}
|
|
|
|
igmpProfilePortProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP Profile of the port."
|
|
::= { igmpProfilePortEntry 1 }
|
|
|
|
|
|
|
|
----------------------------------------
|
|
-- port
|
|
----------------------------------------
|
|
-- Since we define it latter, mark the definition here
|
|
-- subrPortTable OBJECT IDENTIFIER ::= { port 1 }
|
|
-- adslPort OBJECT IDENTIFIER ::= { port 2 }
|
|
vdslPort OBJECT IDENTIFIER ::= { port 3 }
|
|
pvc OBJECT IDENTIFIER ::= { port 4 }
|
|
-- ppvc OBJECT IDENTIFIER ::= { port 5 }
|
|
rpvc OBJECT IDENTIFIER ::= { port 8 }
|
|
-- Since we define it latter, mark the definition here
|
|
-- dsBcastDisableTable OBJECT IDENTIFIER ::= { port 9 }
|
|
paepvc OBJECT IDENTIFIER ::= { port 10 }
|
|
tlspvc OBJECT IDENTIFIER ::= { port 11 }
|
|
-- ipbpvc OBJECT IDENTIFIER ::= { port 12 }
|
|
dtpvc OBJECT IDENTIFIER ::= { port 13 }
|
|
snrMgn OBJECT IDENTIFIER ::= { port 15 }
|
|
dslRate OBJECT IDENTIFIER ::= { port 16 }
|
|
-- G.bond start from 51
|
|
gbond OBJECT IDENTIFIER ::= { port 51 }
|
|
-- Subscriber Port Table
|
|
|
|
subrPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SubrPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes subscriber attributes for the port."
|
|
::= { port 1 }
|
|
|
|
subrPortEntry OBJECT-TYPE
|
|
SYNTAX SubrPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in subrPortTable."
|
|
INDEX { ifIndex }
|
|
::= { subrPortTable 1 }
|
|
|
|
SubrPortEntry ::=
|
|
SEQUENCE {
|
|
subrPortName DisplayString,
|
|
subrPortTel DisplayString
|
|
}
|
|
|
|
subrPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the subscriber."
|
|
::= { subrPortEntry 1 }
|
|
|
|
subrPortTel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telephone number of the subscriber."
|
|
::= { subrPortEntry 2 }
|
|
|
|
--------------------
|
|
-- adslPort
|
|
--------------------
|
|
|
|
-- ADSL Line Table
|
|
|
|
-- adslLineConfTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF AdslLineConfEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes common attributes describing the ADSL line."
|
|
-- ::= { adslPort 1 }
|
|
--
|
|
-- adslLineConfEntry OBJECT-TYPE
|
|
-- SYNTAX AdslLineConfEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in adslLineConfTable."
|
|
-- INDEX { ifIndex }
|
|
-- ::= { adslLineConfTable 1 }
|
|
--
|
|
-- AdslLineConfEntry ::=
|
|
-- SEQUENCE {
|
|
-- adslLineConfAdslMode INTEGER,
|
|
-- adslLineConfAnnexL INTEGER,
|
|
-- adslLineConfAnnexM INTEGER,
|
|
-- adslLineConfAnnexI INTEGER,
|
|
-- adslLineConfOptionMask INTEGER,
|
|
-- adslLineConfPowerMgmt INTEGER,
|
|
-- adslLineConfPowerMode INTEGER,
|
|
-- adslLineConfAturMaxTxPower INTEGER,
|
|
-- adslLineConfAtucMaxTxPower INTEGER,
|
|
-- adslLineConfMaxRxPower INTEGER,
|
|
-- adslLineConfAturCarrierMask OCTET STRING,
|
|
-- adslLineConfAtucCarrierMask0 OCTET STRING,
|
|
-- adslLineConfAtucCarrierMask1 OCTET STRING,
|
|
-- adslLineConfAturInp INTEGER,
|
|
-- adslLineConfAtucInp INTEGER,
|
|
-- adslLineConfL0Time INTEGER,
|
|
-- adslLineConfL2Time INTEGER,
|
|
-- adslLineConfL2ATPR INTEGER,
|
|
-- adslLineConfL2ATPRT INTEGER,
|
|
-- adslLineConfMaxL2Rate INTEGER,
|
|
-- adslLineConfMinL2Rate INTEGER,
|
|
-- adslLineConfL0toL2Rate INTEGER
|
|
-- }
|
|
--
|
|
-- adslLineConfAdslMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- gDotLite(1),
|
|
-- gDotDmt(2),
|
|
-- t1Dot413(3),
|
|
-- auto(4),
|
|
-- etsi(5),
|
|
-- adsl2(6),
|
|
-- adsl2Plus(7)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "G.lite and T1.413 are only applicable to annex A board.
|
|
-- ETSI is only applicable to annex B board."
|
|
-- ::= { adslLineConfEntry 1 }
|
|
--
|
|
-- adslLineConfAnnexL OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enableNarrowMode(1),
|
|
-- enableWideMode(2),
|
|
-- disable(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable annex L for the port(Only in AnnexA)."
|
|
-- ::= { adslLineConfEntry 2 }
|
|
--
|
|
-- adslLineConfAnnexM OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enable(1),
|
|
-- disable(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable annex M for the port(For BCM AnnexA solution)."
|
|
-- ::= { adslLineConfEntry 3 }
|
|
--
|
|
-- adslLineConfAnnexI OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enable(1),
|
|
-- disable(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable annex I for the port(For BCM AnnexA solution)."
|
|
-- ::= { adslLineConfEntry 4 }
|
|
--
|
|
-- adslLineConfOptionMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The semantic for each bit is:
|
|
-- BIT 1 : Disable Trellis
|
|
-- BIT 2 : Disable Reed-Solomon
|
|
-- BIT 3 : Disable upstream bitswap
|
|
-- BIT 4 : Disable downstream bitswap
|
|
-- BIT 5 : Disable 1-bit constellation
|
|
-- BIT 6 : Disable transmit windowing
|
|
-- BIT 7 : Disable s=0.5 support (ADSL1 only)
|
|
-- BIT 8 : Disable G.lite rate limit (ADSL1 only)"
|
|
-- ::= { adslLineConfEntry 5 }
|
|
--
|
|
-- adslLineConfPowerMgmt OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enableL2(1),
|
|
-- enableL2(2),
|
|
-- disable(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable power management for the port."
|
|
-- ::= { adslLineConfEntry 6 }
|
|
--
|
|
-- adslLineConfPowerMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- fix(1),
|
|
-- priorityToPower(2),
|
|
-- priorityToRate(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The power mode of the ADSL line."
|
|
-- ::= { adslLineConfEntry 7 }
|
|
--
|
|
-- adslLineConfAturMaxTxPower OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-130..200)
|
|
-- UNITS "tenth dBm"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum allowed transmit power of ATU-R."
|
|
-- ::= { adslLineConfEntry 8 }
|
|
--
|
|
-- adslLineConfAtucMaxTxPower OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-50..200)
|
|
-- UNITS "tenth dBm"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum allowed transmit power of ATU-C."
|
|
-- ::= { adslLineConfEntry 9 }
|
|
--
|
|
-- adslLineConfMaxRxPower OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-255..255)
|
|
-- UNITS "tenth dBm"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum aggregate received power."
|
|
-- ::= { adslLineConfEntry 10 }
|
|
--
|
|
-- adslLineConfAturCarrierMask OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31;
|
|
-- CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
|
|
-- Bit set to 1 indicates the bin is masked off."
|
|
-- ::= { adslLineConfEntry 11 }
|
|
--
|
|
-- adslLineConfAtucCarrierMask0 OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255;
|
|
-- CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255.
|
|
-- Bit set to 1 indicates the bin is masked off."
|
|
-- ::= { adslLineConfEntry 12 }
|
|
--
|
|
-- adslLineConfAtucCarrierMask1 OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
|
|
-- the bin is masked off."
|
|
-- ::= { adslLineConfEntry 13 }
|
|
--
|
|
-- adslLineConfAturInp OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- zero(1),
|
|
-- zero_point_five(2),
|
|
-- one(3),
|
|
-- two(4),
|
|
-- four(5),
|
|
-- eight(6),
|
|
-- sixteen(7)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
|
|
-- For CTLM solution, user can set value from 1 ~ 4,
|
|
-- but for BCM solution, user can set value from 1 ~ 7."
|
|
-- ::= { adslLineConfEntry 14 }
|
|
--
|
|
-- adslLineConfAtucInp OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- zero(1),
|
|
-- zero_point_five(2),
|
|
-- one(3),
|
|
-- two(4),
|
|
-- four(5),
|
|
-- eight(6),
|
|
-- sixteen(7)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
|
|
-- For CTLM solution, user can set value from 1 ~ 4,
|
|
-- but for BCM solution, user can set value from 1 ~ 7."
|
|
-- ::= { adslLineConfEntry 15 }
|
|
--
|
|
--
|
|
-- adslLineConfL0Time OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set the minimum time in seconds that the ADSL line
|
|
-- must stay in L0 power mode before changing to the L2 power mode.
|
|
-- For CTLM solution, the range is 120 ~ 65535;
|
|
-- for BCM solution, the range is 10 ~ 65535."
|
|
-- ::= { adslLineConfEntry 16 }
|
|
--
|
|
-- adslLineConfL2Time OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set minimum time in seconds that the ADSL line must stay in the
|
|
-- L2 power mode before reducing the power again in the L2 power mode.
|
|
-- For CTLM solution, the range is 60 ~ 65535;
|
|
-- for BCM solution, the range is 10 ~ 65535."
|
|
-- ::= { adslLineConfEntry 17 }
|
|
--
|
|
-- adslLineConfL2ATPR OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set the maximum Aggregate Transmit Power Reduction (ATPR)
|
|
-- in decibels (dB) that is permitted in a L2 power reduction.
|
|
-- The system can gradually decrease the ADSL line transmission power
|
|
-- while it is in the L2 power mode. This is the largest individual
|
|
-- power reduction allowed in the L2 power mode.
|
|
-- For CTLM solution, the range is 1 ~ 5(dB);
|
|
-- for BCM solution, the range is 0 ~ 15(dB)."
|
|
-- ::= { adslLineConfEntry 18 }
|
|
--
|
|
-- adslLineConfL2ATPRT OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "the maximum Aggregate Transmit Power Reduction Total (ATPRT)
|
|
-- in decibels (dB) that is permitted in the L2 power mode.
|
|
-- This is the total transmit power decrease that is allowed
|
|
-- to occur in the L2 power mode.
|
|
-- For CTLM solution, the range is 1 ~ 40(dB);
|
|
-- for BCM solution, the range is 0 ~ 15(dB)."
|
|
-- ::= { adslLineConfEntry 19 }
|
|
--
|
|
--
|
|
-- adslLineConfMaxL2Rate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "configured maximum L2 rate.
|
|
-- (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)"
|
|
-- ::= { adslLineConfEntry 20 }
|
|
--
|
|
-- adslLineConfMinL2Rate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "configured minimum L2 rate.
|
|
-- (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)"
|
|
-- ::= { adslLineConfEntry 21 }
|
|
--
|
|
-- adslLineConfL0toL2Rate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "configured transition L0 to L2 rate.
|
|
-- (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)"
|
|
-- ::= { adslLineConfEntry 22 }
|
|
--
|
|
-- ADSL Port Batch Set
|
|
--
|
|
-- adslPortBatchSet OBJECT IDENTIFIER ::= { adslPort 3 }
|
|
--
|
|
-- adslPortTarget OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The managed object is used for identify the target on which
|
|
-- the port configuration should be performed. The target is encoded as:
|
|
-- Byte 1: 0, Reserved(chaises)
|
|
-- Byte 2~3: 0,0 Reserved(slot)
|
|
-- Byte 4: 0, reserved
|
|
-- Byte 5~11:each octet specifies a set of eight ports, with the first
|
|
-- octet specifying ports 1 through 8, etc."
|
|
-- ::= { adslPortBatchSet 1 }
|
|
--
|
|
-- adslPortOps OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The managed object is for ADSL line configuration. When the EMS
|
|
-- wants to issue the desired operation, the EMS shall send SNMP-SET message to set
|
|
-- the corresponding bit value to be 1. The various bit positions are:
|
|
-- BIT 1: enable port
|
|
-- BIT 2: disable port
|
|
-- BIT 3: set ADSL mode
|
|
-- BIT 4: set line profile
|
|
-- BIT 5: set alarm profile
|
|
-- BIT 6: enable Annex L to be narrow mode(Only in AnnexA)
|
|
-- BIT 7: enable Annex L to be wide mode(Only in AnnexA)
|
|
-- BIT 8: disable Annex L(Only in AnnexA)
|
|
-- BIT 9: enable Annex M (For BCM AnnexA solution)
|
|
-- BIT 10: disable Annex M (For BCM AnnexA solution)
|
|
-- BIT 11: enable Annex I (For BCM AnnexA solution)
|
|
-- BIT 12: disable Annex I (For BCM AnnexA solution)
|
|
-- BIT 13: set option mask
|
|
-- BIT 14: enable power management mode to be L2
|
|
-- BIT 15: enable power management mode to be L2
|
|
-- BIT 16: disable power management mode
|
|
-- BIT 17: set power mode to be fixed
|
|
-- BIT 18: set power mode to be priority to power
|
|
-- BIT 19: set power mode to be priority to rate
|
|
-- BIT 20: set ATU-R max Tx power
|
|
-- BIT 21: set ATU-C max Tx power
|
|
-- BIT 22: set max Rx power
|
|
-- BIT 23: set ATU-R carrier mask
|
|
-- BIT 24: set ATU-C carrier mask
|
|
-- BIT 25: set ATU-R INP minimum setting
|
|
-- BIT 26: set ATU-C INP minimum setting"
|
|
-- ::= { adslPortBatchSet 2 }
|
|
--
|
|
-- adslPortOps2 OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The managed object is for ADSL line configuration. When the EMS
|
|
-- wants to issue the desired operation, the EMS shall send SNMP-SET message to set
|
|
-- the corresponding bit value to be 1. The various bit positions are:
|
|
-- BIT 1: set L0 Time
|
|
-- BIT 2: set L2 Time
|
|
-- BIT 3: set L2 ATPR
|
|
-- BIT 4: set L2 ATPRT
|
|
-- BIT 5: set maximum L2 rate
|
|
-- BIT 6: set minimum L2 rate
|
|
-- BIT 7: set transition L0 to L2 rate"
|
|
-- ::= { adslPortBatchSet 3 }
|
|
--
|
|
--
|
|
-- adslModeForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- gDotLite(1),
|
|
-- gDotDmt(2),
|
|
-- t1Dot413(3),
|
|
-- auto(4),
|
|
-- etsi(5),
|
|
-- adsl2(6),
|
|
-- adsl2Plus(7)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "G.lite and T1.413 are only applicable to annex A board.
|
|
-- ETSI is only applicable to annex B board."
|
|
-- ::= { adslPortBatchSet 4 }
|
|
--
|
|
-- adslLineProfileForBatchSet OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE (1..31))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The ADSL line profile."
|
|
-- ::= { adslPortBatchSet 5 }
|
|
--
|
|
-- adslAlarmProfileForBatchSet OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE (1..31))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The ADSL alarm profile."
|
|
-- ::= { adslPortBatchSet 6 }
|
|
--
|
|
-- adslOptionMaskForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The semantic for each bit is identical to the object adslLineConfOptionMask."
|
|
-- ::= { adslPortBatchSet 7 }
|
|
--
|
|
-- adslAturMaxTxPowerForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-130..200)
|
|
-- UNITS "tenth dBm"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum allowed transmit power of ATU-R."
|
|
-- ::= { adslPortBatchSet 8 }
|
|
--
|
|
-- adslAtucMaxTxPowerForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-50..200)
|
|
-- UNITS "tenth dBm"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum allowed transmit power of ATU-C."
|
|
-- ::= { adslPortBatchSet 9 }
|
|
--
|
|
-- adslMaxRxPowerForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-255..255)
|
|
-- UNITS "tenth dBm"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum aggregate received power."
|
|
-- ::= { adslPortBatchSet 10 }
|
|
--
|
|
-- adslAturCarrierMaskForBatchSet OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31;
|
|
-- CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
|
|
-- Bit set to 1 indicates the bin is masked off."
|
|
-- ::= { adslPortBatchSet 11 }
|
|
--
|
|
-- adslAtucCarrierMask0ForBatchSet OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The downstream carrier mask from bin 32 to 255. Bit set to 1 indicates
|
|
-- the bin is masked off."
|
|
-- ::= { adslPortBatchSet 12 }
|
|
--
|
|
-- adslAtucCarrierMask1ForBatchSet OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
|
|
-- the bin is masked off."
|
|
-- ::= { adslPortBatchSet 13 }
|
|
--
|
|
-- adslAturInpForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- zero(1),
|
|
-- zero_point_five(2),
|
|
-- one(3),
|
|
-- two(4),
|
|
-- four(5),
|
|
-- eight(6),
|
|
-- sixteen(7)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
|
|
-- For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7."
|
|
-- ::= { adslPortBatchSet 14 }
|
|
--
|
|
-- adslAtucInpForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- zero(1),
|
|
-- zero_point_five(2),
|
|
-- one(3),
|
|
-- two(4),
|
|
-- four(5),
|
|
-- eight(6),
|
|
-- sixteen(7)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
|
|
-- For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7."
|
|
-- ::= { adslPortBatchSet 15 }
|
|
--
|
|
--
|
|
-- adslL0TimeForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set the minimum time in seconds that the ADSL line
|
|
-- must stay in L0 power mode before changing to the L2 power mode.
|
|
-- For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535."
|
|
-- ::= { adslPortBatchSet 16 }
|
|
--
|
|
-- adslL2TimeForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set minimum time in seconds that the ADSL line
|
|
-- must stay in the L2 power mode before reducing the power
|
|
-- again in the L2 power mode.
|
|
-- For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535."
|
|
-- ::= { adslPortBatchSet 17 }
|
|
--
|
|
-- adslL2ATPRForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set the maximum Aggregate Transmit Power Reduction (ATPR)
|
|
-- in decibels (dB) that is permitted in a L2 power reduction.
|
|
-- The system can gradually decrease the ADSL line transmission power
|
|
-- while it is in the L2 power mode. This is the largest individual
|
|
-- power reduction allowed in the L2 power mode.
|
|
-- For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB)."
|
|
-- ::= { adslPortBatchSet 18 }
|
|
--
|
|
-- adslL2ATPRTForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "the maximum Aggregate Transmit Power Reduction Total (ATPRT)
|
|
-- in decibels (dB) that is permitted in the L2 power mode.
|
|
-- This is the total transmit power decrease that is allowed
|
|
-- to occur in the L2 power mode.
|
|
-- For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB)."
|
|
-- ::= { adslPortBatchSet 19 }
|
|
--
|
|
-- adslMaxL2RateForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "configured maximum L2 rate.
|
|
-- (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)"
|
|
-- ::= { adslPortBatchSet 20 }
|
|
--
|
|
-- adslMinL2RateForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "configured minimum L2 rate.
|
|
-- (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)"
|
|
-- ::= { adslPortBatchSet 21 }
|
|
--
|
|
-- adslL0toL2RateForBatchSet OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "configured transition L0 to L2 rate.
|
|
-- (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)"
|
|
-- ::= { adslPortBatchSet 22 }
|
|
--
|
|
-- Line Status
|
|
--
|
|
-- adslLineStatusTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF AdslLineStatusEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes the ADSL line status."
|
|
-- ::= { adslPort 4 }
|
|
--
|
|
-- adslLineStatusEntry OBJECT-TYPE
|
|
-- SYNTAX AdslLineStatusEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in adslLineStatusTable."
|
|
-- INDEX { ifIndex }
|
|
-- ::= { adslLineStatusTable 1 }
|
|
--
|
|
-- AdslLineStatusEntry ::=
|
|
-- SEQUENCE {
|
|
-- adslLineStatusMode INTEGER,
|
|
-- adslLineUpTime INTEGER
|
|
-- }
|
|
--
|
|
-- adslLineStatusMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- gDotLite(1),
|
|
-- gDotDmt(2),
|
|
-- t1Dot413(3),
|
|
-- etsi(4),
|
|
-- adsl2(5),
|
|
-- adsl2Plus(6),
|
|
-- none(7)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The link up mode of the ADSL line."
|
|
-- ::= { adslLineStatusEntry 1 }
|
|
--
|
|
-- adslLineUpTime OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The link up time of the ADSL line, in unit of seconds"
|
|
-- ::= { adslLineStatusEntry 2 }
|
|
--
|
|
-- Power Mgmt Parameter Table
|
|
--
|
|
-- powerMgmtParamTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PowerMgmtParamEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table defines L0 to L2 power transition parameters."
|
|
-- ::= { adslPort 5 }
|
|
--
|
|
-- powerMgmtParamEntry OBJECT-TYPE
|
|
-- SYNTAX PowerMgmtParamEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in powerMgmtParamTable."
|
|
-- INDEX { ifIndex }
|
|
-- ::= { powerMgmtParamTable 1 }
|
|
--
|
|
-- PowerMgmtParamEntry ::=
|
|
-- SEQUENCE {
|
|
-- powerMgmtL0Time INTEGER,
|
|
-- powerMgmtL2Time INTEGER,
|
|
-- powerMgmtL2Atpr INTEGER,
|
|
-- powerMgmtL2Atprt INTEGER,
|
|
-- powerMgmtL2MinRate INTEGER,
|
|
-- powerMgmtL2MaxRate INTEGER,
|
|
-- powerMgmtL2ThreshRate INTEGER
|
|
-- }
|
|
--
|
|
-- powerMgmtL0Time OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "second"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the minimum time in L0 mode before L2 mode may be entered."
|
|
-- ::= { powerMgmtParamEntry 1 }
|
|
--
|
|
-- powerMgmtL2Time OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "second"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the minimum time in L2 mode before trimming and in between power trims."
|
|
-- ::= { powerMgmtParamEntry 2 }
|
|
--
|
|
-- powerMgmtL2Atpr OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum Aggregate Transmit Power Reduction."
|
|
-- ::= { powerMgmtParamEntry 3 }
|
|
--
|
|
-- powerMgmtL2Atprt OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum Aggregate Transmit Power Reduction Total."
|
|
-- ::= { powerMgmtParamEntry 4 }
|
|
--
|
|
-- powerMgmtL2MinRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "Kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the minimum L2 rate."
|
|
-- ::= { powerMgmtParamEntry 5 }
|
|
--
|
|
-- powerMgmtL2MaxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "Kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the maximum L2 rate."
|
|
-- ::= { powerMgmtParamEntry 6 }
|
|
--
|
|
-- powerMgmtL2ThreshRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "Kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the rate threshold that triggers the line entering L0 or L2 mode."
|
|
-- ::= { powerMgmtParamEntry 7 }
|
|
--
|
|
-- Power Mgmt PSD Table
|
|
-- Not support in 7324 RU R4.0.2
|
|
-- powerMgmtPSDTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PowerMgmtPSDEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table provides the PSD setting for both ATU-C and ATU-R."
|
|
-- ::= { adslPort 6 }
|
|
--
|
|
-- powerMgmtPSDEntry OBJECT-TYPE
|
|
-- SYNTAX PowerMgmtPSDEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in powerMgmtPSDTable."
|
|
-- INDEX { ifIndex }
|
|
-- ::= { powerMgmtPSDTable 1 }
|
|
--
|
|
-- PowerMgmtPSDEntry ::=
|
|
-- SEQUENCE {
|
|
-- powerMgmtAtucMaxPSD INTEGER,
|
|
-- powerMgmtAturMaxPSD INTEGER
|
|
-- }
|
|
--
|
|
-- powerMgmtAtucMaxPSD OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "0.1dBm/Hz"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the maximum ATU-C PSD."
|
|
-- ::= { powerMgmtPSDEntry 1 }
|
|
--
|
|
-- powerMgmtAturMaxPSD OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "0.1dBm/Hz"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The object specifies the maximum ATU-R PSD."
|
|
-- ::= { powerMgmtPSDEntry 2 }
|
|
|
|
--------------------
|
|
-- vdslPort
|
|
--------------------
|
|
|
|
-- VDSL Line Table
|
|
|
|
vdslLineConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes common attributes describing the VDSL line.
|
|
This table is supported by R2.00 and later versions."
|
|
::= { vdslPort 1 }
|
|
|
|
vdslLineConfEntry OBJECT-TYPE
|
|
SYNTAX VdslLineConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslLineConfTable."
|
|
INDEX { ifIndex }
|
|
::= { vdslLineConfTable 1 }
|
|
|
|
VdslLineConfEntry ::=
|
|
SEQUENCE {
|
|
vdslLineConfUpbo INTEGER,
|
|
vdslLineConfVdslProfile INTEGER,
|
|
-- vdslLineConfFrequencyPlan INTEGER,
|
|
vdslLineConfRfiBand INTEGER,
|
|
vdslLineConfIpqosProfile DisplayString,
|
|
vdslLineConfVturInp INTEGER,
|
|
vdslLineConfVtucInp INTEGER,
|
|
vdslLineConfOptionMask INTEGER,
|
|
vdslLineConfUpboForceLength INTEGER,
|
|
vdslLineConfPsdShape INTEGER,
|
|
vdslLineConfDpbo INTEGER,
|
|
vdslLineConfDpboParamEsel INTEGER,
|
|
vdslLineConfDpboParamEscma INTEGER,
|
|
vdslLineConfDpboParamEscmb INTEGER,
|
|
vdslLineConfDpboParamEscmc INTEGER,
|
|
vdslLineConfDpboParamMus INTEGER,
|
|
vdslLineConfDpboParamFmin INTEGER,
|
|
vdslLineConfDpboParamFmax INTEGER,
|
|
vdslLineConfDpboParamPsdId INTEGER
|
|
-- vdslLineConfPMask INTEGER
|
|
}
|
|
|
|
vdslLineConfUpbo OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable upstream power backoff control."
|
|
::= { vdslLineConfEntry 1 }
|
|
|
|
vdslLineConfVdslProfile OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vdsl8a(1),
|
|
vdsl8b(2),
|
|
vdsl8c(3),
|
|
vdsl8d(4),
|
|
vdsl12a(5),
|
|
vdsl12b(6),
|
|
vdsl17a(7),
|
|
auto(8),
|
|
adsl2plus(9),
|
|
vdsl2(10),
|
|
gdmt(11),
|
|
glite(12),
|
|
adsl2(13),
|
|
t1413(14),
|
|
vdsl2adsl2(15),
|
|
vdsl2gdmt(16),
|
|
vdsl2glite(17),
|
|
vdsl2t1413(18)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set VDSL profile."
|
|
::= { vdslLineConfEntry 2 }
|
|
|
|
-- vdslLineConfFrequencyPlan OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- plan997(1),
|
|
-- plan998(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set VDSL frequency plan."
|
|
-- ::= { vdslLineConfEntry 3 }
|
|
|
|
vdslLineConfRfiBand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
ansi(2),
|
|
etsi(3),
|
|
custom(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set VDSL customized RFI configuration.
|
|
disable: not apply RFI notch to port
|
|
ansi: use pre-defined ANSI RFI notch
|
|
etsi: use pre-defined ETSI notch
|
|
custom: user needs to define customized RFI notch band through vdslRfiCustomTable"
|
|
::= { vdslLineConfEntry 4 }
|
|
|
|
vdslLineConfIpqosProfile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslLineConfEntry 5 }
|
|
|
|
vdslLineConfVturInp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..160)
|
|
UNITS "0.1 DTM symbol"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VTUR minimum INP value"
|
|
::= { vdslLineConfEntry 6 }
|
|
|
|
vdslLineConfVtucInp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..160)
|
|
UNITS "0.1 DTM symbol"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VTUC mimimum INT value"
|
|
::= { vdslLineConfEntry 7 }
|
|
|
|
vdslLineConfOptionMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Bit1: disable Trellis coding in ADSL mode
|
|
Bit2: disable Reed-Solomon coding for ADSL
|
|
Bit3: disable upstream bitswaps
|
|
Bit4: disable downstream bitwaps
|
|
Bit5: disable upstream 1-bit constellation support
|
|
Bit6: disable the transmit windowing in ADSL2+ mode
|
|
Bit7: disable S=0.5 support in G.dmt
|
|
Bit8: reserved
|
|
Bit9: enable nitro
|
|
Bit10: enable ADSL2 Annex L
|
|
Bit11: enable ADSL2+ Annex M
|
|
Bit12: enable US PTM optimization
|
|
Bit13: enable DS PTM optimization
|
|
Bit14: enable US PHYR
|
|
Bit15: enable DS PHYR"
|
|
::= { vdslLineConfEntry 8 }
|
|
|
|
vdslLineConfUpboForceLength OBJECT-TYPE
|
|
SYNTAX INTEGER (-5..1270)
|
|
UNITS "0.1dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"-1 means max(kl0_CO,kl0_CPE).
|
|
-2 means min(kl0_CO,kl0_CPE).
|
|
-3 means kl0_CO.
|
|
-4 means kl0_CPE.
|
|
-5 means kl0_CPE + delta as calculated from.
|
|
"
|
|
::= { vdslLineConfEntry 9 }
|
|
|
|
vdslLineConfPsdShape OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vdsl2aNus0(1),
|
|
vdsl2aEu32(2),
|
|
vdsl2aEu36(3),
|
|
vdsl2aEu40(4),
|
|
vdsl2aEu44(5),
|
|
vdsl2aEu48(6),
|
|
vdsl2aEu52(7),
|
|
vdsl2aEu56(8),
|
|
vdsl2aEu60(9),
|
|
vdsl2aEu64(10),
|
|
vdsl2aEu128(11),
|
|
vdsl1fttexAnsiM1(12),
|
|
vdsl1fttexAnsiM2(13),
|
|
vdsl1fttcabAnsiM1(14),
|
|
vdsl1fttcabAnsiM2(15),
|
|
vdsl1fttexAnsiM1E(16),
|
|
vdsl1fttexAnsiM2E(17),
|
|
vdslFttcabAnsiM1E(18),
|
|
vdslFttcabAnsiM2E(19),
|
|
vdsl2aCt(20),
|
|
vdsl2b8x1(21),
|
|
vdsl2b8x2(22),
|
|
vdsl2b8x3(23),
|
|
vdsl2b8x4(24),
|
|
vdsl2b8x5(25),
|
|
vdsl2b8x6(26),
|
|
vdsl2b8x7(27),
|
|
vdsl2b8x8(28),
|
|
vdsl2b8x9(29),
|
|
vdsl2b8x10(30),
|
|
vdsl2b8x11(31),
|
|
vdsl2b8x12(32),
|
|
vdsl2b8x13(33),
|
|
vdsl2b8x14(34),
|
|
vdsl2b8x15(35),
|
|
vdsl2b8x16(36),
|
|
vdsl2b7x1(37),
|
|
vdsl2b7x2(38),
|
|
vdsl2b7x3(39),
|
|
vdsl2b7x4(40),
|
|
vdsl2b7x5(41),
|
|
vdsl2b7x6(42),
|
|
vdsl2b7x7(43),
|
|
vdsl2b7x8(44),
|
|
vdsl2b7x9(45),
|
|
vdsl2b7x10(46),
|
|
vdsl2btAnfp(47),
|
|
vdsl2c138b(48),
|
|
vdsl2c276b(49),
|
|
vdsl2c138co(50),
|
|
vdsl2c276co(51),
|
|
vdsl2cTcmisdn(52),
|
|
vdsl1QAMCompatible(53)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSD mask type"
|
|
::= { vdslLineConfEntry 10 }
|
|
|
|
vdslLineConfDpbo OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable DPBO"
|
|
::= { vdslLineConfEntry 11 }
|
|
|
|
vdslLineConfDpboParamEsel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..511)
|
|
UNITS "0.5dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO ESEL parameter"
|
|
::= { vdslLineConfEntry 12 }
|
|
|
|
vdslLineConfDpboParamEscma OBJECT-TYPE
|
|
SYNTAX INTEGER (0..640)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO ESCMA parameter -1~1.5 in step of 1/256."
|
|
::= { vdslLineConfEntry 13 }
|
|
|
|
vdslLineConfDpboParamEscmb OBJECT-TYPE
|
|
SYNTAX INTEGER (0..640)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO ESCMB parameter -1~1.5 in step of 1/256."
|
|
::= { vdslLineConfEntry 14 }
|
|
|
|
vdslLineConfDpboParamEscmc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..640)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO ESCMC parameter -1~1.5 in step of 1/256."
|
|
::= { vdslLineConfEntry 15 }
|
|
|
|
vdslLineConfDpboParamMus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "-0.5 dBm/Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO MUS parameter."
|
|
::= { vdslLineConfEntry 16 }
|
|
|
|
vdslLineConfDpboParamFmin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
UNITS "4.3125kHz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO FMIN parameter"
|
|
::= { vdslLineConfEntry 17 }
|
|
|
|
vdslLineConfDpboParamFmax OBJECT-TYPE
|
|
SYNTAX INTEGER (32..6956)
|
|
UNITS "4.3125kHz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBO FMAX parameter"
|
|
::= { vdslLineConfEntry 18 }
|
|
|
|
vdslLineConfDpboParamPsdId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
psdCo(1),
|
|
psdFlat(2),
|
|
psdCabAnsi(3),
|
|
psdCabEtsi(4),
|
|
psdExchEtsi(5),
|
|
psdExchAnsi(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid range for setting is 1~6."
|
|
::= { vdslLineConfEntry 19 }
|
|
|
|
-- vdslLineConfPMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- Bit1: G.DMT (G.992.1)
|
|
-- Bit2: G.LITE (G.992.2)
|
|
-- Bit3: ADSL2 (G.992.3)
|
|
-- Bit5: ADSL2+ (G.992.5)
|
|
-- Bit6: ANSI T1.413
|
|
-- Bit8: G.993.2 VDSL profile 8a
|
|
-- Bit9: G.993.2 VDSL profile 8b
|
|
-- Bit10: G.993.2 VDSL profile 8c
|
|
-- Bit11: G.993.2 VDSL profile 8d
|
|
-- Bit12: G.993.2 VDSL profile 12a
|
|
-- Bit13: G.993.2 VDSL profile 12b
|
|
-- Bit14: G.993.2 VDSL profile 17a"
|
|
-- ::= { vdslLineConfEntry 20 }
|
|
|
|
vdslVlan OBJECT IDENTIFIER ::= { vdslPort 2 }
|
|
|
|
-- vdslPortConfTable
|
|
|
|
vdslPortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes common attributes describing the VDSL port.
|
|
This table is supported by R2.00 and later versions."
|
|
::= { vdslVlan 1 }
|
|
|
|
vdslPortConfEntry OBJECT-TYPE
|
|
SYNTAX VdslPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslPortConfTable."
|
|
INDEX { ifIndex }
|
|
::= { vdslPortConfTable 1 }
|
|
|
|
VdslPortConfEntry ::=
|
|
SEQUENCE {
|
|
-- vdslPortConfPvid VlanIndex,
|
|
-- vdslPortConfPriority INTEGER,
|
|
-- vdslPortConfAcceptableFrameType INTEGER,
|
|
vdslPortConfTlsEnable INTEGER,
|
|
vdslPortConfTlsVid VlanIndex,
|
|
vdslPortConfTlsPriority INTEGER,
|
|
vdslPortConfDtEnable INTEGER,
|
|
vdslPortConfDtSVid VlanIndex,
|
|
vdslPortConfDtSPriority INTEGER,
|
|
vdslPortConfDtCVid VlanIndex,
|
|
vdslPortConfDtCPriority INTEGER
|
|
}
|
|
|
|
-- vdslPortConfPvid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The PVID, the VLAN ID assigned to untagged frames or
|
|
-- Priority-Tagged frames received on this port."
|
|
-- ::= { vdslPortConfEntry 1 }
|
|
--
|
|
-- vdslPortConfPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The default ingress User Priority for this port."
|
|
-- ::= { vdslPortConfEntry 2 }
|
|
--
|
|
-- vdslPortConfAcceptableFrameType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- admitAll(1),
|
|
-- admitOnlyVlanTagged(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "When this is admitOnlyVlanTagged(2) the device will
|
|
-- discard untagged frames or Priority-Tagged frames
|
|
-- received on this port. When admitAll(1), untagged
|
|
-- frames or Priority-Tagged frames received on this port
|
|
-- will be accepted and assigned to the PVID for this port"
|
|
-- ::= { vdslPortConfEntry 3 }
|
|
|
|
vdslPortConfTlsEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable the transparent LAN service."
|
|
::= { vdslPortConfEntry 4 }
|
|
|
|
vdslPortConfTlsVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transparent LAN service s-tag VID."
|
|
::= { vdslPortConfEntry 5 }
|
|
|
|
vdslPortConfTlsPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transparent LAN service s-tag priority."
|
|
::= { vdslPortConfEntry 6 }
|
|
|
|
vdslPortConfDtEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable the Double Tagging service."
|
|
::= { vdslPortConfEntry 7 }
|
|
|
|
vdslPortConfDtSVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Double Tagging service s-tag VID."
|
|
::= { vdslPortConfEntry 8 }
|
|
|
|
vdslPortConfDtSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Double Tagging service s-tag priority."
|
|
::= { vdslPortConfEntry 9 }
|
|
|
|
vdslPortConfDtCVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Double Tagging service c-tag VID."
|
|
::= { vdslPortConfEntry 10 }
|
|
|
|
vdslPortConfDtCPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Double Tagging service c-tag priority."
|
|
::= { vdslPortConfEntry 11 }
|
|
|
|
-- vdslPortVlanTranslateTable
|
|
vdslPortVlanTranslateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPortVlanTranslateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains VLAN translation."
|
|
::= { vdslVlan 2 }
|
|
|
|
vdslPortVlanTranslateEntry OBJECT-TYPE
|
|
SYNTAX VdslPortVlanTranslateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslPortVlanTranslateTable."
|
|
INDEX { ifIndex , vdslPortVlanTranslateVpi , vdslPortVlanTranslateVci , vdslPortVlanTranslateCvid }
|
|
::= { vdslPortVlanTranslateTable 1 }
|
|
|
|
VdslPortVlanTranslateEntry ::=
|
|
SEQUENCE {
|
|
vdslPortVlanTranslateVpi INTEGER,
|
|
vdslPortVlanTranslateVci INTEGER,
|
|
vdslPortVlanTranslateCxvid VlanIndex,
|
|
vdslPortVlanTranslateCvid VlanIndex,
|
|
vdslPortVlanTranslateSvid VlanIndex,
|
|
vdslPortVlanTranslateDsonly INTEGER,
|
|
vdslPortVlanTranslateRowStatus RowStatus
|
|
}
|
|
|
|
vdslPortVlanTranslateVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the vtt."
|
|
::= { vdslPortVlanTranslateEntry 1 }
|
|
|
|
vdslPortVlanTranslateVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the vtt."
|
|
::= { vdslPortVlanTranslateEntry 2 }
|
|
|
|
vdslPortVlanTranslateCxvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CXVID of the vtt."
|
|
::= { vdslPortVlanTranslateEntry 3 }
|
|
|
|
vdslPortVlanTranslateCvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CVID of the vtt."
|
|
::= { vdslPortVlanTranslateEntry 4 }
|
|
|
|
vdslPortVlanTranslateSvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SVID of the vtt."
|
|
::= { vdslPortVlanTranslateEntry 5 }
|
|
|
|
vdslPortVlanTranslateDsonly OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Donwstream direction only of the vtt."
|
|
::= { vdslPortVlanTranslateEntry 6 }
|
|
|
|
vdslPortVlanTranslateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { vdslPortVlanTranslateEntry 7 }
|
|
|
|
-- vdslPortVlanTable
|
|
|
|
-- vdslPortVlanTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF VdslPortVlanEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes common attributes describing the VDSL port.
|
|
-- This table is supported by R2.00 and later versions."
|
|
-- ::= { vdslVlan 2 }
|
|
--
|
|
-- vdslPortVlanEntry OBJECT-TYPE
|
|
-- SYNTAX VdslPortVlanEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in vdslPortVlanTable."
|
|
-- INDEX { ifIndex, dot1qVlanIndex }
|
|
-- ::= { vdslPortVlanTable 1 }
|
|
--
|
|
-- VdslPortVlanEntry ::=
|
|
-- SEQUENCE {
|
|
-- vdslPortVlanReg INTEGER,
|
|
-- vdslPortVlanTag INTEGER,
|
|
-- vdslPortVlanRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- vdslPortVlanReg OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- egress(1),
|
|
-- forbidden(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The port is egress or forbidden for this VLAN."
|
|
-- ::= { vdslPortVlanEntry 1 }
|
|
--
|
|
-- vdslPortVlanTag OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- tag(1),
|
|
-- untag(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The port should transmit egress packets for this VLAN as tagged or untagged."
|
|
-- ::= { vdslPortVlanEntry 2 }
|
|
--
|
|
-- vdslPortVlanRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object is used to create a new row or delete an existing row in this table."
|
|
-- ::= { vdslPortVlanEntry 3 }
|
|
|
|
-- vdslVlanStaticTable
|
|
|
|
-- vdslVlanStaticTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF VdslVlanStaticEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table containing static configuration information for
|
|
-- each VLAN configured into the device by (local or
|
|
-- network) management. All entries are permanent and will
|
|
-- be restored after the device is reset.
|
|
-- This table is supported by R2.00 and later versions."
|
|
-- ::= { vdslVlan 3 }
|
|
--
|
|
-- vdslVlanStaticEntry OBJECT-TYPE
|
|
-- SYNTAX VdslVlanStaticEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in vdslVlanStaticTable."
|
|
-- INDEX { dot1qVlanIndex }
|
|
-- ::= { vdslVlanStaticTable 1 }
|
|
--
|
|
-- VdslVlanStaticEntry ::=
|
|
-- SEQUENCE {
|
|
-- vdslVlanStaticEgressPorts PortList,
|
|
-- vdslVlanStaticUntaggedPorts PortList,
|
|
-- vdslVlanStaticRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- vdslVlanStaticEgressPorts OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The set of ports which are permanently assigned to the
|
|
-- egress list for this VLAN by management."
|
|
-- ::= { vdslVlanStaticEntry 1 }
|
|
--
|
|
-- vdslVlanStaticUntaggedPorts OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The set of ports which should transmit egress packets for this VLAN as untagged."
|
|
-- ::= { vdslVlanStaticEntry 2 }
|
|
--
|
|
-- vdslVlanStaticRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of this entry."
|
|
-- ::= { vdslVlanStaticEntry 3 }
|
|
|
|
-- vdslPortPvlanTable
|
|
|
|
vdslPortPvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPortPvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol VLAN configuration table."
|
|
::= { vdslVlan 4 }
|
|
|
|
vdslPortPvlanEntry OBJECT-TYPE
|
|
SYNTAX VdslPortPvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslPortPvlanTable."
|
|
INDEX { ifIndex, vdslPortPvlanEtype }
|
|
::= { vdslPortPvlanTable 1 }
|
|
|
|
VdslPortPvlanEntry ::=
|
|
SEQUENCE {
|
|
vdslPortPvlanEtype Unsigned32,
|
|
vdslPortPvlanVid VlanIndex,
|
|
vdslPortPvlanPriority INTEGER,
|
|
vdslPortPvlanRowStatus RowStatus
|
|
}
|
|
|
|
vdslPortPvlanEtype OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0~0xffff."
|
|
::= { vdslPortPvlanEntry 1 }
|
|
|
|
vdslPortPvlanVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslPortPvlanEntry 2 }
|
|
|
|
vdslPortPvlanPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslPortPvlanEntry 3 }
|
|
|
|
vdslPortPvlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslPortPvlanEntry 4 }
|
|
|
|
-- VDSL RFI Custom Table
|
|
|
|
vdslRfiCustomTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslRfiCustomEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes VDSL customized RFI configuration.
|
|
This table is supported by R2.00 and later versions."
|
|
::= { vdslPort 3 }
|
|
|
|
vdslRfiCustomEntry OBJECT-TYPE
|
|
SYNTAX VdslRfiCustomEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslRfiCustomTable."
|
|
INDEX { vdslRfiCustomIndex }
|
|
::= { vdslRfiCustomTable 1 }
|
|
|
|
VdslRfiCustomEntry ::=
|
|
SEQUENCE {
|
|
vdslRfiCustomIndex INTEGER,
|
|
vdslRfiCustomStartFreq INTEGER,
|
|
vdslRfiCustomEndFreq INTEGER,
|
|
vdslRfiCustomEnable INTEGER
|
|
}
|
|
|
|
vdslRfiCustomIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the table."
|
|
::= { vdslRfiCustomEntry 1 }
|
|
|
|
vdslRfiCustomStartFreq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "KHz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start value of the customized frequency range."
|
|
::= { vdslRfiCustomEntry 2 }
|
|
|
|
vdslRfiCustomEndFreq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "KHz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end value of the customized frequency range."
|
|
::= { vdslRfiCustomEntry 3 }
|
|
|
|
vdslRfiCustomEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the customized frequency range setting."
|
|
::= { vdslRfiCustomEntry 4 }
|
|
|
|
-- vdslLineConfUpboParamTable
|
|
|
|
vdslLineConfUpboParamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineConfUpboParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes VDSL UPBO configuration."
|
|
::= { vdslPort 4 }
|
|
|
|
vdslLineConfUpboParamEntry OBJECT-TYPE
|
|
SYNTAX VdslLineConfUpboParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslLineConfUpboParamTable."
|
|
INDEX { ifIndex,vdslLineConfUpboParamBand }
|
|
::= { vdslLineConfUpboParamTable 1 }
|
|
|
|
VdslLineConfUpboParamEntry ::=
|
|
SEQUENCE {
|
|
vdslLineConfUpboParamBand INTEGER,
|
|
vdslLineConfUpboParamA INTEGER,
|
|
vdslLineConfUpboParamB INTEGER
|
|
}
|
|
|
|
vdslLineConfUpboParamBand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the table."
|
|
::= { vdslLineConfUpboParamEntry 1 }
|
|
|
|
vdslLineConfUpboParamA OBJECT-TYPE
|
|
SYNTAX INTEGER (4000..8095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslLineConfUpboParamEntry 2 }
|
|
|
|
vdslLineConfUpboParamB OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslLineConfUpboParamEntry 3 }
|
|
|
|
-- vdslLineConfDpboTable
|
|
|
|
vdslLineConfDpboTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineConfDpboEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes VDSL DPBO configuration."
|
|
::= { vdslPort 5 }
|
|
|
|
vdslLineConfDpboEntry OBJECT-TYPE
|
|
SYNTAX VdslLineConfDpboEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in vdslLineConfDpboTable."
|
|
INDEX { ifIndex, vdslLineConfDpboIndex }
|
|
::= { vdslLineConfDpboTable 1 }
|
|
|
|
VdslLineConfDpboEntry ::=
|
|
SEQUENCE {
|
|
vdslLineConfDpboIndex INTEGER,
|
|
vdslLineConfDpboTone INTEGER,
|
|
vdslLineConfDpboPsd INTEGER
|
|
}
|
|
|
|
vdslLineConfDpboIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the table."
|
|
::= { vdslLineConfDpboEntry 1 }
|
|
|
|
vdslLineConfDpboTone OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslLineConfDpboEntry 2 }
|
|
|
|
vdslLineConfDpboPsd OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "-0.5dBm/Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { vdslLineConfDpboEntry 3 }
|
|
|
|
--------------------
|
|
-- pvc
|
|
--------------------
|
|
|
|
maxNumOfPvcs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of PVCs which could be created on a port."
|
|
::= { pvc 1 }
|
|
|
|
-- PVC Table
|
|
|
|
pvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes PVC configuration."
|
|
::= { pvc 2 }
|
|
|
|
pvcEntry OBJECT-TYPE
|
|
SYNTAX PvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in pvcTable."
|
|
INDEX { ifIndex, pvcVpi, pvcVci, pvcPvid }
|
|
::= { pvcTable 1 }
|
|
|
|
PvcEntry ::=
|
|
SEQUENCE {
|
|
-- Common --
|
|
pvcVpi INTEGER,
|
|
pvcVci INTEGER,
|
|
pvcPvid VlanIndex,
|
|
pvcPriority INTEGER,
|
|
pvcProfile DisplayString,
|
|
pvcAuto INTEGER,
|
|
|
|
-- Only for pvc --
|
|
pvcEncap INTEGER,
|
|
|
|
-- Only for paepvc --
|
|
pvcAcName DisplayString,
|
|
pvcServiceName DisplayString,
|
|
pvcHelloTime INTEGER,
|
|
|
|
-- Other --
|
|
pvcRowStatus RowStatus
|
|
}
|
|
|
|
-- Common --
|
|
pvcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the pvc."
|
|
::= { pvcEntry 1 }
|
|
|
|
pvcVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the pvc."
|
|
::= { pvcEntry 2 }
|
|
|
|
pvcPvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default VID of the pvc."
|
|
::= { pvcEntry 3 }
|
|
|
|
|
|
pvcPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1p default priority of the pvc."
|
|
::= { pvcEntry 5 }
|
|
|
|
pvcProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the ipqosProfileTable.
|
|
"
|
|
::= { pvcEntry 6 }
|
|
|
|
pvcAuto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable auto detection for PPPoE/PPPoA encapsulation."
|
|
::= { pvcEntry 14 }
|
|
|
|
-- Only for PVC --
|
|
pvcEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc(1),
|
|
vc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encapsulation of the pvc."
|
|
::= { pvcEntry 7 }
|
|
|
|
-- Other --
|
|
pvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { pvcEntry 8 }
|
|
|
|
-- Only for PAEPVC --
|
|
pvcAcName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access concentrator name for paepvc."
|
|
::= { pvcEntry 11 }
|
|
|
|
pvcServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service name for paepvc."
|
|
::= { pvcEntry 12 }
|
|
|
|
pvcHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time."
|
|
::= { pvcEntry 13 }
|
|
|
|
-- PVC state --
|
|
pvcStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PvcStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table show current PVC status."
|
|
::= { pvc 3 }
|
|
|
|
pvcStateEntry OBJECT-TYPE
|
|
SYNTAX PvcStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in pvcStateTable."
|
|
INDEX { ifIndex, pvcStateVpi, pvcStateVci, pvcStatePvid }
|
|
::= { pvcStateTable 1 }
|
|
|
|
PvcStateEntry ::=
|
|
SEQUENCE {
|
|
pvcStateVpi INTEGER,
|
|
pvcStateVci INTEGER,
|
|
pvcStatePvid VlanIndex,
|
|
pvcStatePriority INTEGER,
|
|
--pvcStateCvid VlanIndex,
|
|
--pvcStateCPriority INTEGER,
|
|
--pvcStateMode DisplayString,
|
|
pvcStateChannelType DisplayString,
|
|
pvcStateEncap DisplayString
|
|
}
|
|
|
|
pvcStateVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the pvc."
|
|
::= { pvcStateEntry 1 }
|
|
|
|
pvcStateVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the pvc."
|
|
::= { pvcStateEntry 2 }
|
|
|
|
pvcStatePvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default VID of the pvc."
|
|
::= { pvcStateEntry 3 }
|
|
|
|
pvcStatePriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1p default priority of the pvc."
|
|
::= { pvcStateEntry 4 }
|
|
|
|
--pvcStateCvid OBJECT-TYPE
|
|
--SYNTAX VlanIndex
|
|
--MAX-ACCESS read-only
|
|
--STATUS current
|
|
--DESCRIPTION
|
|
--"Default C-VID for paepvc."
|
|
--::= { pvcStateEntry 5 }
|
|
|
|
--pvcStateCPriority OBJECT-TYPE
|
|
--SYNTAX INTEGER (0..7)
|
|
--MAX-ACCESS read-only
|
|
--STATUS current
|
|
--DESCRIPTION
|
|
--"802.1p default C-priority for paepvc."
|
|
--::= { pvcStateEntry 6 }
|
|
|
|
--pvcStateMode OBJECT-TYPE
|
|
--SYNTAX DisplayString (SIZE (1..31))
|
|
--MAX-ACCESS read-only
|
|
--STATUS current
|
|
--DESCRIPTION
|
|
--"The value of this object identifies the link mode at runntime."
|
|
--::= { pvcStateEntry 7 }
|
|
|
|
pvcStateChannelType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the channel type at runtime."
|
|
::= { pvcStateEntry 8 }
|
|
|
|
pvcStateEncap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the channel encapsulation at runtime."
|
|
::= { pvcStateEntry 9 }
|
|
|
|
|
|
-- Upstream Rate Limit Table
|
|
|
|
-- pvcUsRateLimitTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PvcUsRateLimitEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table defines the upstream rate limit for each PVC."
|
|
-- ::= { pvc 4 }
|
|
--
|
|
-- pvcUsRateLimitEntry OBJECT-TYPE
|
|
-- SYNTAX PvcUsRateLimitEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in pvcUsRateLimitTable."
|
|
-- INDEX { ifIndex, pvcVpi, pvcVci }
|
|
-- ::= { pvcUsRateLimitTable 1 }
|
|
--
|
|
-- PvcUsRateLimitEntry ::=
|
|
-- SEQUENCE {
|
|
-- pvcUsRateLimitEnable INTEGER,
|
|
-- pvcUsRateLimit INTEGER
|
|
-- }
|
|
--
|
|
-- pvcUsRateLimitEnable OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enable(1),
|
|
-- disable(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable upstream rate limit for a PVC."
|
|
-- ::= { pvcUsRateLimitEntry 1 }
|
|
--
|
|
-- pvcUsRateLimit OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- UNITS "Kbps"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Upstream rate limit in Kbps for a PVC."
|
|
-- ::= { pvcUsRateLimitEntry 2 }
|
|
--
|
|
|
|
--------------------
|
|
-- priority pvc
|
|
--------------------
|
|
|
|
-- maxNumOfPriorityPvcs OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The maximum number of priority PVCs which could be created on a port."
|
|
-- ::= { ppvc 1 }
|
|
|
|
-- Priority PVC Table
|
|
|
|
-- ppvcTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PpvcEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes priority PVC configuration."
|
|
-- ::= { ppvc 2 }
|
|
--
|
|
-- ppvcEntry OBJECT-TYPE
|
|
-- SYNTAX PpvcEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in ppvcTable."
|
|
-- INDEX { ifIndex, ppvcVpi, ppvcVci, ppvcPvid }
|
|
-- ::= { ppvcTable 1 }
|
|
--
|
|
-- PpvcEntry ::=
|
|
-- SEQUENCE {
|
|
-- ppvcVpi INTEGER,
|
|
-- ppvcVci INTEGER,
|
|
-- ppvcPvid VlanIndex,
|
|
-- ppvcEncap INTEGER,
|
|
-- ppvcPriority INTEGER,
|
|
-- ppvcRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ppvcVpi OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..255)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VPI of the ppvc."
|
|
-- ::= { ppvcEntry 1 }
|
|
--
|
|
-- ppvcVci OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VCI of the ppvc."
|
|
-- ::= { ppvcEntry 2 }
|
|
--
|
|
-- ppvcPvid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Default VID of the ppvc."
|
|
-- ::= { ppvcEntry 3 }
|
|
--
|
|
-- ppvcEncap OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- llc(1),
|
|
-- vc(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Encapsulation of the ppvc."
|
|
-- ::= { ppvcEntry 4 }
|
|
--
|
|
-- ppvcPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "802.1p default priority of the ppvc."
|
|
-- ::= { ppvcEntry 5 }
|
|
--
|
|
-- ppvcRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object is used to create a new row or delete an existing row in this table."
|
|
-- ::= { ppvcEntry 6 }
|
|
|
|
-- Priority PVC Member Table
|
|
|
|
-- ppvcMemberTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PpvcMemberEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes priority PVC member configuration."
|
|
-- ::= { ppvc 4 }
|
|
--
|
|
-- ppvcMemberEntry OBJECT-TYPE
|
|
-- SYNTAX PpvcMemberEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in ppvcMemberTable."
|
|
-- INDEX { ifIndex, ppvcVpi, ppvcVci, ppvcMemberVpi, ppvcMemberVci, ppvcMemberPriority }
|
|
-- ::= { ppvcMemberTable 1 }
|
|
--
|
|
-- PpvcMemberEntry ::=
|
|
-- SEQUENCE {
|
|
-- ppvcMemberVpi INTEGER,
|
|
-- ppvcMemberVci INTEGER,
|
|
-- ppvcMemberPriority INTEGER,
|
|
-- ppvcMemberProfileDS DisplayString,
|
|
-- ppvcMemberRowStatus RowStatus,
|
|
-- ppvcMemberProfileUS DisplayString
|
|
-- }
|
|
--
|
|
-- ppvcMemberVpi OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..255)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VPI of the member ppvc."
|
|
-- ::= { ppvcMemberEntry 1 }
|
|
--
|
|
-- ppvcMemberVci OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VCI of the member ppvc."
|
|
-- ::= { ppvcMemberEntry 2 }
|
|
--
|
|
-- ppvcMemberPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "802.1p default priority of the member ppvc."
|
|
-- ::= { ppvcMemberEntry 3 }
|
|
--
|
|
-- ppvcMemberProfileDS OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE (1..31))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The profile of the member ppvc in DS side."
|
|
-- ::= { ppvcMemberEntry 4 }
|
|
--
|
|
-- ppvcMemberRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object is used to create a new row or delete an existing row in this table."
|
|
-- ::= { ppvcMemberEntry 5 }
|
|
--
|
|
-- ppvcMemberProfileUS OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE (1..31))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The profile of the member ppvc in US side."
|
|
-- ::= { ppvcMemberEntry 6 }
|
|
|
|
-------------------------------
|
|
-- 2684 routed mode pvc (rpvc)
|
|
-------------------------------
|
|
|
|
-- Routed Gateway Table
|
|
|
|
rpvcGatewayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RpvcGatewayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes Routed Gateway configuration."
|
|
::= { rpvc 1 }
|
|
|
|
rpvcGatewayEntry OBJECT-TYPE
|
|
SYNTAX RpvcGatewayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in Routed Gateway table."
|
|
INDEX { rpvcGatewayIp }
|
|
::= { rpvcGatewayTable 1 }
|
|
|
|
RpvcGatewayEntry ::=
|
|
SEQUENCE {
|
|
rpvcGatewayIp IpAddress,
|
|
rpvcGatewayVlanId VlanIndex,
|
|
rpvcGatewayRowStatus RowStatus,
|
|
rpvcGatewayPriority INTEGER
|
|
}
|
|
|
|
rpvcGatewayIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of RPVC gateway."
|
|
::= { rpvcGatewayEntry 1 }
|
|
|
|
rpvcGatewayVlanId OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan id send to this RPVC gateway."
|
|
::= { rpvcGatewayEntry 2 }
|
|
|
|
rpvcGatewayRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { rpvcGatewayEntry 3 }
|
|
|
|
rpvcGatewayPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1p p bit send to this RPVC gateway."
|
|
::= { rpvcGatewayEntry 4 }
|
|
|
|
-- Routed PVC Table
|
|
|
|
rpvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RpvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes RPVC configuration."
|
|
::= { rpvc 2 }
|
|
|
|
rpvcEntry OBJECT-TYPE
|
|
SYNTAX RpvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in rpvcTable."
|
|
INDEX { ifIndex, rpvcVpi, rpvcVci, rpvcIp, rpvcNetmask }
|
|
::= { rpvcTable 1 }
|
|
|
|
RpvcEntry ::=
|
|
SEQUENCE {
|
|
rpvcVpi INTEGER,
|
|
rpvcVci INTEGER,
|
|
rpvcEncap INTEGER,
|
|
rpvcProfile DisplayString,
|
|
rpvcIp IpAddress,
|
|
rpvcNetmask IpAddress,
|
|
rpvcGatewayIpAddress IpAddress,
|
|
rpvcRowStatus RowStatus
|
|
}
|
|
|
|
rpvcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the rpvc."
|
|
::= { rpvcEntry 1 }
|
|
|
|
rpvcVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the rpvc."
|
|
::= { rpvcEntry 2 }
|
|
|
|
rpvcEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc(1),
|
|
vc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encapsulation of the rpvc."
|
|
::= { rpvcEntry 3 }
|
|
|
|
rpvcProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ipqos profile of the rpvc."
|
|
::= { rpvcEntry 4 }
|
|
|
|
rpvcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP of the rpvc."
|
|
::= { rpvcEntry 5 }
|
|
|
|
rpvcNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP mask of the rpvc IP."
|
|
::= { rpvcEntry 6 }
|
|
|
|
rpvcGatewayIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway IP of rpvc."
|
|
::= { rpvcEntry 7 }
|
|
|
|
rpvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { rpvcEntry 8 }
|
|
|
|
-- Routed PVC Routed Domain Table
|
|
|
|
rpvcRouteDomainTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RpvcRouteDomainEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes RPVC route domain configuration."
|
|
::= { rpvc 3 }
|
|
|
|
rpvcRouteDomainEntry OBJECT-TYPE
|
|
SYNTAX RpvcRouteDomainEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in rpvcRouteDomainTable."
|
|
INDEX { ifIndex, rpvcRouteDomainVpi, rpvcRouteDomainVci, rpvcRouteDomainIp, rpvcRouteDomainNetmask }
|
|
::= { rpvcRouteDomainTable 1 }
|
|
|
|
RpvcRouteDomainEntry ::=
|
|
SEQUENCE {
|
|
rpvcRouteDomainVpi INTEGER,
|
|
rpvcRouteDomainVci INTEGER,
|
|
rpvcRouteDomainIp IpAddress,
|
|
rpvcRouteDomainNetmask IpAddress,
|
|
rpvcRouteDomainRowStatus RowStatus
|
|
}
|
|
|
|
rpvcRouteDomainVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the rpvc."
|
|
::= { rpvcRouteDomainEntry 1 }
|
|
|
|
rpvcRouteDomainVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the rpvc."
|
|
::= { rpvcRouteDomainEntry 2 }
|
|
|
|
rpvcRouteDomainIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route domain IP."
|
|
::= { rpvcRouteDomainEntry 3 }
|
|
|
|
rpvcRouteDomainNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP mask of the route domain IP."
|
|
::= { rpvcRouteDomainEntry 4 }
|
|
|
|
rpvcRouteDomainRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { rpvcRouteDomainEntry 5 }
|
|
|
|
rpvcArpAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set RPVC ARP proxy aging time 10..10000 seconds,
|
|
0 to disable againg."
|
|
::= { rpvc 4 }
|
|
|
|
rpvcArpFlush OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flush the RPVC ARP proxy table."
|
|
::= { rpvc 5 }
|
|
|
|
--------------------
|
|
-- dsBcastDisableTable
|
|
--------------------
|
|
|
|
dsBcastDisableTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsBcastDisableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes Down Stream Bcast configuration."
|
|
::= { port 9 }
|
|
|
|
dsBcastDisableEntry OBJECT-TYPE
|
|
SYNTAX DsBcastDisableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in Down Stream Bcast table."
|
|
INDEX { ifIndex, dsBcastDisableVlanId }
|
|
::= { dsBcastDisableTable 1 }
|
|
|
|
DsBcastDisableEntry ::=
|
|
SEQUENCE {
|
|
dsBcastDisableVlanId INTEGER,
|
|
dsBcastDisableRowStatus RowStatus
|
|
}
|
|
|
|
dsBcastDisableVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"downstream broadcast disabled vid."
|
|
::= { dsBcastDisableEntry 1 }
|
|
|
|
dsBcastDisableRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { dsBcastDisableEntry 2 }
|
|
|
|
--------------------
|
|
-- paepvc
|
|
--------------------
|
|
|
|
-- PPPoAoE PVC Table
|
|
|
|
paepvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PaepvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes PPPoAoE PVC configuration."
|
|
::= { paepvc 1 }
|
|
|
|
paepvcEntry OBJECT-TYPE
|
|
SYNTAX PaepvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of paepvcTable."
|
|
INDEX { ifIndex, paepvcVpi, paepvcVci, paepvcPvid }
|
|
::= { paepvcTable 1 }
|
|
|
|
PaepvcEntry ::=
|
|
SEQUENCE {
|
|
paepvcVpi INTEGER,
|
|
paepvcVci INTEGER,
|
|
paepvcPvid VlanIndex,
|
|
paepvcEncap INTEGER,
|
|
paepvcPriority INTEGER,
|
|
paepvcProfile DisplayString,
|
|
paepvcAcName DisplayString,
|
|
paepvcServiceName DisplayString,
|
|
paepvcHelloTime INTEGER,
|
|
paepvcRowStatus RowStatus,
|
|
paepvcCvid VlanIndex,
|
|
paepvcCPriority INTEGER
|
|
}
|
|
|
|
paepvcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the pvc."
|
|
::= { paepvcEntry 1 }
|
|
|
|
paepvcVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the pvc."
|
|
::= { paepvcEntry 2 }
|
|
|
|
paepvcPvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default VID of the pvc."
|
|
::= { paepvcEntry 3 }
|
|
|
|
paepvcEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc(1),
|
|
vc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encapsulation of the paepvc."
|
|
::= { paepvcEntry 4 }
|
|
|
|
paepvcPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1p default priority of the pvc."
|
|
::= { paepvcEntry 5 }
|
|
|
|
paepvcProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the ipqosProfileTable."
|
|
::= { paepvcEntry 6 }
|
|
|
|
paepvcAcName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access concentrator name."
|
|
::= { paepvcEntry 7 }
|
|
|
|
paepvcServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service name."
|
|
::= { paepvcEntry 8 }
|
|
|
|
paepvcHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system will close the PVC if there are not any LCP echo messages passed through
|
|
during the LCP hello time."
|
|
::= { paepvcEntry 9 }
|
|
|
|
paepvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { paepvcEntry 10 }
|
|
|
|
paepvcCvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default C-VID of the pvc."
|
|
::= { paepvcEntry 12 }
|
|
|
|
|
|
paepvcCPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1p default C-priority of the pvc."
|
|
::= { paepvcEntry 13 }
|
|
|
|
--------------------
|
|
-- tlspvc
|
|
--------------------
|
|
|
|
-- TLS PVC Table
|
|
|
|
tlspvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TlspvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes Transparent LAN Service (TLS) PVC configuration."
|
|
::= { tlspvc 1 }
|
|
|
|
tlspvcEntry OBJECT-TYPE
|
|
SYNTAX TlspvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of tlspvcTable."
|
|
INDEX { ifIndex, tlspvcVpi, tlspvcVci, tlspvcSvid }
|
|
::= { tlspvcTable 1 }
|
|
|
|
TlspvcEntry ::=
|
|
SEQUENCE {
|
|
tlspvcVpi INTEGER,
|
|
tlspvcVci INTEGER,
|
|
tlspvcSvid VlanIndex,
|
|
tlspvcEncap INTEGER,
|
|
tlspvcSpriority INTEGER,
|
|
tlspvcProfile DisplayString,
|
|
tlspvcRowStatus RowStatus
|
|
}
|
|
|
|
tlspvcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the pvc."
|
|
::= { tlspvcEntry 1 }
|
|
|
|
tlspvcVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the pvc."
|
|
::= { tlspvcEntry 2 }
|
|
|
|
tlspvcSvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"s-tag VLAN ID of the pvc."
|
|
::= { tlspvcEntry 3 }
|
|
|
|
tlspvcEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc(1),
|
|
vc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encapsulation of the tlspvc."
|
|
::= { tlspvcEntry 4 }
|
|
|
|
tlspvcSpriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"s-tag priority of the pvc."
|
|
::= { tlspvcEntry 5 }
|
|
|
|
tlspvcProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the ipqosProfileTable."
|
|
::= { tlspvcEntry 6 }
|
|
|
|
tlspvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { tlspvcEntry 7 }
|
|
|
|
--------------------
|
|
-- ipbpvc
|
|
--------------------
|
|
|
|
-- Domain Table
|
|
|
|
-- ipbpvcDomainTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcDomainEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes ipbpvc domain configuration.
|
|
-- This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvc 1 }
|
|
--
|
|
-- ipbpvcDomainEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcDomainEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcDomainTable."
|
|
-- INDEX { ipbpvcDomainName }
|
|
-- ::= { ipbpvcDomainTable 1 }
|
|
--
|
|
-- IpbpvcDomainEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcDomainName OCTET STRING,
|
|
-- ipbpvcDomainRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ipbpvcDomainName OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Name of the domain."
|
|
-- ::= { ipbpvcDomainEntry 1 }
|
|
--
|
|
-- ipbpvcDomainRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Row status of the table."
|
|
-- ::= { ipbpvcDomainEntry 2 }
|
|
|
|
-- Domain VLAN Table
|
|
|
|
-- ipbpvcDomainVlanTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcDomainVlanEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes ipbpvc domain VLAN configuration.
|
|
-- This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvc 2 }
|
|
--
|
|
-- ipbpvcDomainVlanEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcDomainVlanEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcDomainVlanTable."
|
|
-- INDEX { ipbpvcDomainName, ipbpvcDomainVlanId }
|
|
-- ::= { ipbpvcDomainVlanTable 1 }
|
|
--
|
|
-- IpbpvcDomainVlanEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcDomainVlanId VlanIndex,
|
|
-- ipbpvcDomainDhcpVlanEnable INTEGER,
|
|
-- ipbpvcDomainVlanRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ipbpvcDomainVlanId OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set VLAN to join or leave the specified domain."
|
|
-- ::= { ipbpvcDomainVlanEntry 1 }
|
|
--
|
|
-- ipbpvcDomainDhcpVlanEnable OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enable(1),
|
|
-- disable(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable DHCP VLAN in a domain."
|
|
-- ::= { ipbpvcDomainVlanEntry 2 }
|
|
--
|
|
-- ipbpvcDomainVlanRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Row status of the table used to create/delete an entry."
|
|
-- ::= { ipbpvcDomainVlanEntry 3 }
|
|
|
|
-- Edge Router Table
|
|
|
|
-- ipbpvcEdgeRouterTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcEdgeRouterEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes ipbpvc edge router configuration.
|
|
-- This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvc 3 }
|
|
--
|
|
-- ipbpvcEdgeRouterEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcEdgeRouterEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcEdgeRouterTable."
|
|
-- INDEX { ipbpvcDomainName, ipbpvcEdgeRouterIp, ipbpvcEdgeRouterMask, ipbpvcEdgeRouterVid }
|
|
-- ::= { ipbpvcEdgeRouterTable 1 }
|
|
--
|
|
-- IpbpvcEdgeRouterEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcEdgeRouterIp IpAddress,
|
|
-- ipbpvcEdgeRouterMask INTEGER,
|
|
-- ipbpvcEdgeRouterVid VlanIndex,
|
|
-- ipbpvcEdgeRouterRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ipbpvcEdgeRouterIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "IP address of the edge router."
|
|
-- ::= { ipbpvcEdgeRouterEntry 1 }
|
|
--
|
|
-- ipbpvcEdgeRouterVid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN ID of the edge router."
|
|
-- ::= { ipbpvcEdgeRouterEntry 2 }
|
|
--
|
|
-- ipbpvcEdgeRouterMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Netmask of the edge router."
|
|
-- ::= { ipbpvcEdgeRouterEntry 3 }
|
|
--
|
|
-- ipbpvcEdgeRouterRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Row status of the table used to create/delete an entry."
|
|
-- ::= { ipbpvcEdgeRouterEntry 4 }
|
|
|
|
-- Interface Table
|
|
|
|
-- ipbpvcInterfaceTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcInterfaceEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes ipbpvc interface configuration.
|
|
-- This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvc 4 }
|
|
--
|
|
-- ipbpvcInterfaceEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcInterfaceEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcInterfaceTable."
|
|
-- INDEX { ipbpvcDomainName, ipbpvcInterfaceIp, ipbpvcInterfaceMask, ipbpvcInterfaceVid }
|
|
-- ::= { ipbpvcInterfaceTable 1 }
|
|
--
|
|
-- IpbpvcInterfaceEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcInterfaceIp IpAddress,
|
|
-- ipbpvcInterfaceMask INTEGER,
|
|
-- ipbpvcInterfaceVid VlanIndex,
|
|
-- ipbpvcInterfaceIfIndex INTEGER,
|
|
-- ipbpvcInterfaceVpi INTEGER,
|
|
-- ipbpvcInterfaceVci INTEGER,
|
|
-- ipbpvcInterfaceRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ipbpvcInterfaceIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "IP address of the interface."
|
|
-- ::= { ipbpvcInterfaceEntry 1 }
|
|
--
|
|
-- ipbpvcInterfaceMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Netmask of the interface."
|
|
-- ::= { ipbpvcInterfaceEntry 2 }
|
|
--
|
|
-- ipbpvcInterfaceVid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN ID of the interface."
|
|
-- ::= { ipbpvcInterfaceEntry 3 }
|
|
--
|
|
-- ipbpvcInterfaceIfIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "IfIndex of the interface."
|
|
-- ::= { ipbpvcInterfaceEntry 4 }
|
|
--
|
|
-- ipbpvcInterfaceVpi OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VPI of the interface."
|
|
-- ::= { ipbpvcInterfaceEntry 5 }
|
|
--
|
|
-- ipbpvcInterfaceVci OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VCI of the interface."
|
|
-- ::= { ipbpvcInterfaceEntry 6 }
|
|
--
|
|
-- ipbpvcInterfaceRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Row status of the table used to create/delete an entry."
|
|
-- ::= { ipbpvcInterfaceEntry 7 }
|
|
|
|
-- Route Table
|
|
|
|
-- ipbpvcRouteTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcRouteEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes ipbpvc route configuration.
|
|
-- This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvc 5 }
|
|
--
|
|
-- ipbpvcRouteEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcRouteEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcRouteTable."
|
|
-- INDEX { ipbpvcDomainName, ipbpvcRouteIp, ipbpvcRouteMask, ipbpvcRouteNextHop }
|
|
-- ::= { ipbpvcRouteTable 1 }
|
|
--
|
|
-- IpbpvcRouteEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcRouteIp IpAddress,
|
|
-- ipbpvcRouteMask INTEGER,
|
|
-- ipbpvcRouteNextHop IpAddress,
|
|
-- ipbpvcRouteMetric INTEGER,
|
|
-- ipbpvcRoutePriority INTEGER,
|
|
-- ipbpvcRouteRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ipbpvcRouteIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "IP address of the route."
|
|
-- ::= { ipbpvcRouteEntry 1 }
|
|
--
|
|
-- ipbpvcRouteMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Netmask of the route."
|
|
-- ::= { ipbpvcRouteEntry 2 }
|
|
--
|
|
-- ipbpvcRouteNextHop OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Next hop IP address of the route."
|
|
-- ::= { ipbpvcRouteEntry 3 }
|
|
--
|
|
-- ipbpvcRouteMetric OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..15)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Metric of the route."
|
|
-- ::= { ipbpvcRouteEntry 4 }
|
|
--
|
|
-- ipbpvcRoutePriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Priority of the route. Note that the default value of this object is 8, which means
|
|
-- we keep the original priority of the packet(frame)."
|
|
-- ::= { ipbpvcRouteEntry 5 }
|
|
--
|
|
-- ipbpvcRouteRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Row status of the table used to create/delete an entry."
|
|
-- ::= { ipbpvcRouteEntry 6 }
|
|
|
|
-- PVC Table
|
|
|
|
-- ipbpvcTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table includes ipbpvc configuration.
|
|
-- This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvc 6 }
|
|
--
|
|
-- ipbpvcEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcTable."
|
|
-- INDEX { ifIndex, ipbpvcVpi, ipbpvcVci, ipbpvcPvid }
|
|
-- ::= { ipbpvcTable 1 }
|
|
--
|
|
-- IpbpvcEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcVpi INTEGER,
|
|
-- ipbpvcVci INTEGER,
|
|
-- ipbpvcPvid INTEGER,
|
|
-- ipbpvcEncap INTEGER,
|
|
-- ipbpvcPriority INTEGER,
|
|
-- ipbpvcProfile OCTET STRING,
|
|
-- ipbpvcRowStatus RowStatus,
|
|
-- ipbpvcProfileUS OCTET STRING
|
|
-- }
|
|
--
|
|
-- ipbpvcVpi OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VPI of the PVC."
|
|
-- ::= { ipbpvcEntry 1 }
|
|
--
|
|
-- ipbpvcVci OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VCI of the PVC."
|
|
-- ::= { ipbpvcEntry 2 }
|
|
--
|
|
-- ipbpvcPvid OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "PVID of the PVC."
|
|
-- ::= { ipbpvcEntry 3 }
|
|
--
|
|
-- ipbpvcEncap OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- ipoe(1),
|
|
-- reserved(2),
|
|
-- ipoa(3)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Type of the PVC."
|
|
-- ::= { ipbpvcEntry 4 }
|
|
--
|
|
-- ipbpvcPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Priority of the PVC."
|
|
-- ::= { ipbpvcEntry 5 }
|
|
--
|
|
-- ipbpvcProfile OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile of the PVC."
|
|
-- ::= { ipbpvcEntry 6 }
|
|
--
|
|
-- ipbpvcRowStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Row status of the table used to create/delete an entry."
|
|
-- ::= { ipbpvcEntry 7 }
|
|
--
|
|
-- ipbpvcProfileUS OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "US Profile of the PVC."
|
|
-- ::= { ipbpvcEntry 8 }
|
|
|
|
-- ARP Proxy
|
|
|
|
-- arpproxy OBJECT IDENTIFIER ::= { ipbpvc 8 }
|
|
--
|
|
-- arpproxyAge OBJECT-TYPE
|
|
-- SYNTAX INTEGER (10..10000)
|
|
-- UNITS "second"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Aging time of the ARP proxy.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxy 1 }
|
|
--
|
|
-- arpproxyFlush OBJECT IDENTIFIER ::= { arpproxy 2 }
|
|
--
|
|
-- arpproxyFlushTarget OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- all(1),
|
|
-- edgerouter(2),
|
|
-- interface(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The target whose ARP table to be flushed.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 1 }
|
|
--
|
|
-- arpproxyFlushOps OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set the object to 1 to start flushing.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 2 }
|
|
--
|
|
-- arpproxyFlushEdgeRouterIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Flush ARP table for the specified edge router.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 3 }
|
|
--
|
|
-- arpproxyFlushEdgeRouterVid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Flush ARP table for the specified edge router.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 4 }
|
|
--
|
|
-- arpproxyFlushInterfaceIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Flush ARP table for the specified interface.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 5 }
|
|
--
|
|
-- arpproxyFlushInterfaceMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Flush ARP table for the specified interface.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 6 }
|
|
--
|
|
-- arpproxyFlushInterfaceVid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Flush ARP table for the specified interface.
|
|
-- This object is supported by R3.00 and later versions."
|
|
-- ::= { arpproxyFlush 7 }
|
|
--
|
|
--------------------
|
|
-- dtpvc
|
|
--------------------
|
|
|
|
-- DT PVC Table
|
|
|
|
dtpvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DtpvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes Double Tagging (DT) PVC configuration."
|
|
::= { dtpvc 1 }
|
|
|
|
dtpvcEntry OBJECT-TYPE
|
|
SYNTAX DtpvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dtpvcTable."
|
|
INDEX { ifIndex, dtpvcVpi, dtpvcVci, dtpvcSvid }
|
|
::= { dtpvcTable 1 }
|
|
|
|
DtpvcEntry ::=
|
|
SEQUENCE {
|
|
-- Common --
|
|
dtpvcVpi INTEGER,
|
|
dtpvcVci INTEGER,
|
|
dtpvcSvid VlanIndex,
|
|
dtpvcSpriority INTEGER,
|
|
dtpvcCvid VlanIndex,
|
|
dtpvcCpriority INTEGER,
|
|
dtpvcEncap INTEGER,
|
|
dtpvcProfile DisplayString,
|
|
dtpvcRowStatus RowStatus,
|
|
dtpvcAuto INTEGER,
|
|
-- Only for dtpvc --
|
|
dtpvcSuperChannel INTEGER,
|
|
-- Only for paepvc --
|
|
dtpvcAcName DisplayString,
|
|
dtpvcServiceName DisplayString,
|
|
dtpvcHelloTime INTEGER
|
|
}
|
|
|
|
-- Common --
|
|
dtpvcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the pvc."
|
|
::= { dtpvcEntry 1 }
|
|
|
|
dtpvcVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the pvc."
|
|
::= { dtpvcEntry 2 }
|
|
|
|
dtpvcSvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"s-tag VLAN ID of the pvc."
|
|
::= { dtpvcEntry 3 }
|
|
|
|
dtpvcSpriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"s-tag priority of the pvc."
|
|
::= { dtpvcEntry 4 }
|
|
|
|
dtpvcCvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"c-tag VLAN ID of the pvc."
|
|
::= { dtpvcEntry 5 }
|
|
|
|
dtpvcCpriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"c-tag priority of the pvc."
|
|
::= { dtpvcEntry 6 }
|
|
|
|
|
|
dtpvcEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc(1),
|
|
vc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encapsulation of the dtpvc."
|
|
::= { dtpvcEntry 7 }
|
|
|
|
dtpvcProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the ipqosProfileTable."
|
|
::= { dtpvcEntry 8 }
|
|
|
|
dtpvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { dtpvcEntry 9 }
|
|
|
|
dtpvcAuto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable auto detection for PPPoE/PPPoA encapsulation."
|
|
::= { dtpvcEntry 14 }
|
|
|
|
-- Only for DTPVC --
|
|
dtpvcSuperChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified the configured DTPVC is a super channel."
|
|
::= { dtpvcEntry 10 }
|
|
|
|
-- Only for PAEPVC --
|
|
dtpvcAcName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access concentrator name for paepvc."
|
|
::= { dtpvcEntry 11 }
|
|
|
|
dtpvcServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service name for paepvc."
|
|
::= { dtpvcEntry 12 }
|
|
|
|
dtpvcHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time."
|
|
::= { dtpvcEntry 13 }
|
|
|
|
-- DTPVC state --
|
|
dtpvcStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DtpvcStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table show current DTPVC status."
|
|
::= { dtpvc 2 }
|
|
|
|
dtpvcStateEntry OBJECT-TYPE
|
|
SYNTAX DtpvcStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in dtpvcStateTable."
|
|
INDEX { ifIndex, dtpvcStateVpi, dtpvcStateVci, dtpvcStateSvid }
|
|
::= { dtpvcStateTable 1 }
|
|
|
|
DtpvcStateEntry ::=
|
|
SEQUENCE {
|
|
dtpvcStateVpi INTEGER,
|
|
dtpvcStateVci INTEGER,
|
|
dtpvcStateSvid VlanIndex,
|
|
dtpvcStateSPriority INTEGER,
|
|
dtpvcStateCvid VlanIndex,
|
|
dtpvcStateCPriority INTEGER,
|
|
--dtpvcStateMode DisplayString,
|
|
dtpvcStateChannelType DisplayString,
|
|
dtpvcStateEncap DisplayString
|
|
}
|
|
|
|
dtpvcStateVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the dtpvc."
|
|
::= { dtpvcStateEntry 1 }
|
|
|
|
dtpvcStateVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the dtpvc."
|
|
::= { dtpvcStateEntry 2 }
|
|
|
|
dtpvcStateSvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default S-VID of the dtpvc."
|
|
::= { dtpvcStateEntry 3 }
|
|
|
|
dtpvcStateSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"S-priority of the dtpvc."
|
|
::= { dtpvcStateEntry 4 }
|
|
|
|
dtpvcStateCvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default C-VID of the dtpvc."
|
|
::= { dtpvcStateEntry 5 }
|
|
|
|
dtpvcStateCPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"C-priority of the dtpvc."
|
|
::= { dtpvcStateEntry 6 }
|
|
|
|
--dtpvcStateMode OBJECT-TYPE
|
|
--SYNTAX DisplayString (SIZE (1..31))
|
|
--MAX-ACCESS read-only
|
|
--STATUS current
|
|
--DESCRIPTION
|
|
--"The value of this object identifies the link mode at runntime."
|
|
--::= { dtpvcStateEntry 7 }
|
|
|
|
dtpvcStateChannelType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the channel type at runtime."
|
|
::= { dtpvcStateEntry 8 }
|
|
|
|
dtpvcStateEncap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the channel encapsulation at runtime."
|
|
::= { dtpvcStateEntry 9 }
|
|
|
|
--------------------
|
|
-- snrMgn
|
|
--------------------
|
|
|
|
-- snrMgnTable
|
|
|
|
snrMgnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnrMarginEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the per port SNR Margin configuration."
|
|
::= { snrMgn 1 }
|
|
|
|
snrMgnEntry OBJECT-TYPE
|
|
SYNTAX SnrMarginEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of snrMgnTable."
|
|
INDEX { ifIndex }
|
|
::= { snrMgnTable 1 }
|
|
|
|
SnrMarginEntry ::=
|
|
SEQUENCE {
|
|
snrMgnMode INTEGER,
|
|
snrMgnUcTarget INTEGER,
|
|
snrMgnUcMax INTEGER,
|
|
snrMgnUcMin INTEGER,
|
|
snrMgnUcDownshift INTEGER,
|
|
snrMgnUcUpshift INTEGER,
|
|
snrMgnUrTarget INTEGER,
|
|
snrMgnUrMax INTEGER,
|
|
snrMgnUrMin INTEGER,
|
|
snrMgnUrDownshift INTEGER,
|
|
snrMgnUrUpshift INTEGER
|
|
}
|
|
|
|
snrMgnMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
profile(0),
|
|
line(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure DSL SNR margin configuration mode of the specified ports.
|
|
Profile: the SNR margin configuration comes from DSL profile.
|
|
Line: the SNR margin configuration comes from line configuration."
|
|
::= { snrMgnEntry 1 }
|
|
|
|
snrMgnUcTarget OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { snrMgnEntry 2 }
|
|
|
|
snrMgnUcMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum acceptable Signal/Noise Margin.
|
|
If the Noise Margin is above this the modem should
|
|
attempt to reduce its power output to optimize its
|
|
operation."
|
|
::= { snrMgnEntry 3 }
|
|
|
|
snrMgnUcMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum acceptable Signal/Noise Margin.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to increase its power output. If that
|
|
is not possible the modem will attempt to
|
|
re-initialize or shut down."
|
|
::= { snrMgnEntry 4 }
|
|
|
|
snrMgnUcDownshift OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate downshift.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to decrease its transmit rate. In
|
|
the case that RADSL mode is not present,
|
|
the value will be `0'."
|
|
::= { snrMgnEntry 5 }
|
|
|
|
snrMgnUcUpshift OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate upshift.
|
|
If the noise margin rises above this level, the modem
|
|
should attempt to increase its transmit rate. In
|
|
the case that RADSL is not present, the value will
|
|
be `0'."
|
|
::= { snrMgnEntry 6 }
|
|
|
|
snrMgnUrTarget OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { snrMgnEntry 7 }
|
|
|
|
snrMgnUrMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum acceptable Signal/Noise Margin.
|
|
If the Noise Margin is above this the modem should
|
|
attempt to reduce its power output to optimize its
|
|
operation."
|
|
::= { snrMgnEntry 8 }
|
|
|
|
snrMgnUrMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum acceptable Signal/Noise Margin.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to increase its power output. If that
|
|
is not possible the modem will attempt to
|
|
re-initialize or shut down."
|
|
::= { snrMgnEntry 9 }
|
|
|
|
snrMgnUrDownshift OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate downshift.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to decrease its transmit rate.
|
|
In the case that RADSL mode is not present,
|
|
the value will be `0'."
|
|
::= { snrMgnEntry 10 }
|
|
|
|
snrMgnUrUpshift OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate upshift.
|
|
If the noise margin rises above this level, the modem
|
|
should attempt to increase its transmit rate.
|
|
In the case that RADSL is not present,
|
|
the value will be `0'."
|
|
::= { snrMgnEntry 11 }
|
|
|
|
--------------------
|
|
-- dsl rate
|
|
--------------------
|
|
|
|
-- dslRateTable
|
|
|
|
dslRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DslRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the per port DSL Rate configuration."
|
|
::= { dslRate 1 }
|
|
|
|
dslRateEntry OBJECT-TYPE
|
|
SYNTAX DslRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dslRateTable."
|
|
INDEX { ifIndex }
|
|
::= { dslRateTable 1 }
|
|
|
|
DslRateEntry ::=
|
|
SEQUENCE {
|
|
dslRateMode INTEGER,
|
|
dslRateLatencyMode INTEGER,
|
|
dslRateXtucMaxInterleaveDelay INTEGER,
|
|
dslRateXtucMaxTxRate Unsigned32,
|
|
dslRateXtucMinTxRate Unsigned32,
|
|
dslRateXturMaxInterleaveDelay INTEGER,
|
|
dslRateXturMaxTxRate Unsigned32,
|
|
dslRateXturMinTxRate Unsigned32
|
|
}
|
|
|
|
dslRateMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
profile(0),
|
|
line(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure DSL Rate configuration mode of the specified ports.
|
|
Profile: the DSL Rate configuration comes from DSL profile.
|
|
Line: the DSL Rate configuration comes from line configuration."
|
|
::= { dslRateEntry 1 }
|
|
|
|
dslRateLatencyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interleave(1),
|
|
fast(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The latency mode is fast or interleave"
|
|
::= { dslRateEntry 2 }
|
|
|
|
dslRateXtucMaxInterleaveDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured maximum Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the interleave channel
|
|
and defines the mapping (relative spacing) between
|
|
subsequent input bytes at the interleaver input and
|
|
their placement in the bit stream at the interleaver
|
|
output. Larger numbers provide greater separation
|
|
between consecutive input bytes in the output bit
|
|
stream allowing for improved impulse noise immunity
|
|
at the expense of payload latency."
|
|
::= { dslRateEntry 3 }
|
|
|
|
dslRateXtucMaxTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum Transmit rate for `Fast' or `Interleave' channels,
|
|
in bps."
|
|
::= { dslRateEntry 4 }
|
|
|
|
dslRateXtucMinTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum Transmit rate for `Fast' or `Interleave' channels,
|
|
in bps"
|
|
::= { dslRateEntry 5 }
|
|
|
|
dslRateXturMaxInterleaveDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured maximum Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the interleave channel
|
|
and defines the mapping (relative spacing) between
|
|
subsequent input bytes at the interleaver input and
|
|
their placement in the bit stream at the interleaver
|
|
output. Larger numbers provide greater separation
|
|
between consecutive input bytes in the output bit
|
|
stream allowing for improved impulse noise immunity
|
|
at the expense of payload latency"
|
|
::= { dslRateEntry 6 }
|
|
|
|
dslRateXturMaxTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { dslRateEntry 7 }
|
|
|
|
dslRateXturMinTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum Transmit rate for `Fast' or `Interleave' channels,
|
|
in bps."
|
|
::= { dslRateEntry 8 }
|
|
|
|
--------------------
|
|
-- gbond
|
|
--------------------
|
|
|
|
-- gbondTable
|
|
|
|
gbondGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GbondGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the G.Bond configuration information for
|
|
each bonding group of the device."
|
|
::= { gbond 1 }
|
|
|
|
gbondGroupEntry OBJECT-TYPE
|
|
SYNTAX GbondGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of gbondTable."
|
|
INDEX { gbondGroupName }
|
|
::= { gbondGroupTable 1 }
|
|
|
|
GbondGroupEntry ::=
|
|
SEQUENCE {
|
|
gbondGroupName OCTET STRING,
|
|
gbondGroupPorts OCTET STRING,
|
|
-- gbondGroupSid INTEGER,
|
|
gbondGroupUpRate Unsigned32,
|
|
gbondGroupDownRate Unsigned32,
|
|
gbondGroupRowStatus RowStatus
|
|
}
|
|
|
|
gbondGroupName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively assigned string, which may be used to identify bonding group."
|
|
::= { gbondGroupEntry 1 }
|
|
|
|
gbondGroupPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are currently assigned to the
|
|
bonding group of specified group name.
|
|
Byte 1: Reserved(chassis)
|
|
Byte 2~3: Reserved(slot)
|
|
Byte 4: Reserved
|
|
Byte 5~11:each octet specifies a set of eight ports, with the first
|
|
octet specifying ports 1 through 8, etc."
|
|
::= { gbondGroupEntry 2 }
|
|
|
|
-- gbondGroupSid OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- sid8(1),
|
|
-- sid12(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the sequence index mode of the bonding group."
|
|
-- ::= { gbondGroupEntry 3 }
|
|
|
|
gbondGroupUpRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UP stream rate."
|
|
::= { gbondGroupEntry 4 }
|
|
|
|
gbondGroupDownRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DOWN stream rate."
|
|
::= { gbondGroupEntry 5 }
|
|
|
|
gbondGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { gbondGroupEntry 6 }
|
|
|
|
----------------------------------------
|
|
-- profile
|
|
----------------------------------------
|
|
sraShiftMarginProfile OBJECT IDENTIFIER ::= { profile 1 }
|
|
ipqosProfile OBJECT IDENTIFIER ::= { profile 8 }
|
|
|
|
--------------------
|
|
-- sraShiftMarginProfile
|
|
--------------------
|
|
|
|
-- sraShiftMarginProfile
|
|
|
|
sraShiftMarginProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SraShiftMarginProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes sra shift margin related configuration."
|
|
::= { sraShiftMarginProfile 1 }
|
|
|
|
sraShiftMarginProfileEntry OBJECT-TYPE
|
|
SYNTAX SraShiftMarginProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in ipqosProfileTable."
|
|
INDEX { sraShiftMarginProfileName }
|
|
::= { sraShiftMarginProfileTable 1 }
|
|
|
|
SraShiftMarginProfileEntry ::=
|
|
SEQUENCE {
|
|
sraShiftMarginProfileName DisplayString,
|
|
xtucConfDownshiftSnrMgn INTEGER,
|
|
xtucConfUpshiftSnrMgn INTEGER,
|
|
xtucConfDownshiftTime INTEGER,
|
|
xtucConfUpshiftTime INTEGER,
|
|
xturConfDownshiftSnrMgn INTEGER,
|
|
xturConfUpshiftSnrMgn INTEGER,
|
|
xturConfDownshiftTime INTEGER,
|
|
xturConfUpshiftTime INTEGER,
|
|
sraShiftMarginProfileStatus RowStatus
|
|
}
|
|
|
|
sraShiftMarginProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in this table."
|
|
::= { sraShiftMarginProfileEntry 1 }
|
|
|
|
xtucConfDownshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db."
|
|
::= { sraShiftMarginProfileEntry 2 }
|
|
|
|
xtucConfUpshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db."
|
|
::= { sraShiftMarginProfileEntry 3 }
|
|
|
|
xtucConfDownshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec."
|
|
::= { sraShiftMarginProfileEntry 4 }
|
|
|
|
xtucConfUpshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec."
|
|
::= { sraShiftMarginProfileEntry 5 }
|
|
|
|
xturConfDownshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db."
|
|
::= { sraShiftMarginProfileEntry 6 }
|
|
|
|
xturConfUpshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db."
|
|
::= { sraShiftMarginProfileEntry 7 }
|
|
|
|
xturConfDownshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec."
|
|
::= { sraShiftMarginProfileEntry 8 }
|
|
|
|
xturConfUpshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec."
|
|
::= { sraShiftMarginProfileEntry 9 }
|
|
|
|
sraShiftMarginProfileStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or modify or delete an existing row in this table."
|
|
::= { sraShiftMarginProfileEntry 10 }
|
|
|
|
|
|
|
|
|
|
--------------------
|
|
-- ipqosProfile
|
|
--------------------
|
|
|
|
-- ipqosProfileTable
|
|
|
|
maxNumOfIpqosProfiles OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of IPQOS profiles supported by the system."
|
|
::= { ipqosProfile 1 }
|
|
|
|
ipqosProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpqosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes IPQOS related configuration."
|
|
::= { ipqosProfile 2 }
|
|
|
|
ipqosProfileEntry OBJECT-TYPE
|
|
SYNTAX IpqosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in ipqosProfileTable."
|
|
INDEX { ipqosProfileName , ipqosProfileNumOfQueue }
|
|
::= { ipqosProfileTable 1 }
|
|
|
|
IpqosProfileEntry ::=
|
|
SEQUENCE {
|
|
ipqosProfileName DisplayString,
|
|
ipqosProfileNumOfQueue INTEGER,
|
|
ipqosProfileRowStatus RowStatus
|
|
}
|
|
|
|
ipqosProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used by the IPQOS profile table in order to identify a row of this table."
|
|
::= { ipqosProfileEntry 1 }
|
|
|
|
ipqosProfileNumOfQueue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IPQOS queues."
|
|
::= { ipqosProfileEntry 2 }
|
|
|
|
ipqosProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in the table."
|
|
::= { ipqosProfileEntry 3 }
|
|
|
|
-- ipqosProfileQueueTable
|
|
|
|
ipqosProfileQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpqosProfileQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes IPQOS queue related configuration."
|
|
::= { ipqosProfile 3 }
|
|
|
|
ipqosProfileQueueEntry OBJECT-TYPE
|
|
SYNTAX IpqosProfileQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in ipqosProfileQueueTable."
|
|
INDEX { ipqosProfileName , ipqosProfileQueueIndex }
|
|
::= { ipqosProfileQueueTable 1 }
|
|
|
|
IpqosProfileQueueEntry ::=
|
|
SEQUENCE {
|
|
ipqosProfileQueueIndex INTEGER,
|
|
ipqosProfileQueuePIR INTEGER,
|
|
ipqosProfileQueueCIR INTEGER,
|
|
ipqosProfileQueuePBS INTEGER,
|
|
ipqosProfileQueueCBS INTEGER,
|
|
ipqosProfileQueueLevel INTEGER,
|
|
ipqosProfileQueueWeight INTEGER
|
|
}
|
|
|
|
ipqosProfileQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPQOS queue index."
|
|
::= { ipqosProfileQueueEntry 1 }
|
|
|
|
ipqosProfileQueuePIR OBJECT-TYPE
|
|
SYNTAX INTEGER (512..131072)
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peak rate.(multiple of 256)"
|
|
::= { ipqosProfileQueueEntry 2 }
|
|
|
|
ipqosProfileQueueCIR OBJECT-TYPE
|
|
SYNTAX INTEGER (256..65536)
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Commited rate.(multiple of 256)"
|
|
::= { ipqosProfileQueueEntry 3 }
|
|
|
|
ipqosProfileQueuePBS OBJECT-TYPE
|
|
SYNTAX INTEGER (3072..65536)
|
|
UNITS "byte"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peak burst size.(mutiple of 256)"
|
|
::= { ipqosProfileQueueEntry 4 }
|
|
|
|
ipqosProfileQueueCBS OBJECT-TYPE
|
|
SYNTAX INTEGER (3072..65536)
|
|
UNITS "byts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Commited burst size.(mutiple of 256)"
|
|
::= { ipqosProfileQueueEntry 5 }
|
|
|
|
ipqosProfileQueueLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
UNITS "byts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue level."
|
|
::= { ipqosProfileQueueEntry 6 }
|
|
|
|
ipqosProfileQueueWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
UNITS "byts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue weight."
|
|
::= { ipqosProfileQueueEntry 7 }
|
|
|
|
----------------------------------------
|
|
-- switch
|
|
----------------------------------------
|
|
dot3ad OBJECT IDENTIFIER ::= { switch 6 }
|
|
dscp OBJECT IDENTIFIER ::= { switch 10 }
|
|
vlanIsolation OBJECT IDENTIFIER ::= { switch 12 }
|
|
enetMtu OBJECT IDENTIFIER ::= { switch 13 }
|
|
tpid OBJECT IDENTIFIER ::= { switch 14 }
|
|
cfm OBJECT IDENTIFIER ::= { switch 15 }
|
|
|
|
-- Standalone IP DSLAM puts all ACL features in 'switch', from OID 51
|
|
dhcp OBJECT IDENTIFIER ::= { switch 51 }
|
|
macfilter OBJECT IDENTIFIER ::= { switch 53 }
|
|
dhcpSnoop OBJECT IDENTIFIER ::= { switch 55 }
|
|
acl OBJECT IDENTIFIER ::= { switch 56 }
|
|
pppoeAgent OBJECT IDENTIFIER ::= { switch 57 }
|
|
n1mac OBJECT IDENTIFIER ::= { switch 58 }
|
|
macff OBJECT IDENTIFIER ::= { switch 60 }
|
|
|
|
--------------------
|
|
-- dot3ad
|
|
--------------------
|
|
|
|
dot3adTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot3adEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains 802.3ad configuration."
|
|
::= { dot3ad 1 }
|
|
|
|
dot3adEntry OBJECT-TYPE
|
|
SYNTAX Dot3adEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { dot3adGroupId }
|
|
::= { dot3adTable 1 }
|
|
|
|
Dot3adEntry ::=
|
|
SEQUENCE {
|
|
dot3adGroupId INTEGER,
|
|
dot3adEnable INTEGER
|
|
}
|
|
|
|
dot3adGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group ID 1 for the subtending group and 2 for the uplink group."
|
|
::= { dot3adEntry 1 }
|
|
|
|
dot3adEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
enableWithLacp(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable 802.3ad function."
|
|
::= { dot3adEntry 2 }
|
|
|
|
lacpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LACP system priority."
|
|
::= { dot3ad 2 }
|
|
|
|
lacpTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
shorttimeout(1),
|
|
longtimeout(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval to exchange LACP packets in order to check that the peer port
|
|
in the trunk group is still up."
|
|
::= { dot3ad 3 }
|
|
|
|
portTrunkingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortTrunkingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains current status of port trunking."
|
|
::= { dot3ad 4 }
|
|
|
|
portTrunkingEntry OBJECT-TYPE
|
|
SYNTAX PortTrunkingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { portTrunkingGroupId }
|
|
::= { portTrunkingTable 1 }
|
|
|
|
PortTrunkingEntry ::=
|
|
SEQUENCE {
|
|
portTrunkingGroupId INTEGER,
|
|
portTrunkingStatus INTEGER,
|
|
portTrunkingPortList PortList
|
|
}
|
|
|
|
portTrunkingGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group ID 1 for the subtending group and 2 for the uplink group."
|
|
::= { portTrunkingEntry 1 }
|
|
|
|
portTrunkingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port trunking status."
|
|
::= { portTrunkingEntry 2 }
|
|
|
|
portTrunkingPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port list which actually joins the trunking group."
|
|
::= { portTrunkingEntry 3 }
|
|
|
|
--------------------
|
|
-- dscp
|
|
--------------------
|
|
|
|
dscpMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DscpMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains DSCP mapping configuration for the adsl ports."
|
|
::= { dscp 1 }
|
|
|
|
dscpMappingEntry OBJECT-TYPE
|
|
SYNTAX DscpMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dscpMappingTable."
|
|
INDEX { dscpSrcCodePoint }
|
|
::= { dscpMappingTable 1 }
|
|
|
|
DscpMappingEntry ::=
|
|
SEQUENCE {
|
|
dscpSrcCodePoint INTEGER,
|
|
-- dscpMapCodePoint INTEGER,
|
|
dscpMapPriority INTEGER
|
|
}
|
|
|
|
dscpSrcCodePoint OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP source code point used for mapping."
|
|
::= { dscpMappingEntry 1 }
|
|
|
|
-- dscpMapCodePoint OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..63)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The mapping code point that will replace the source code point in the incoming packet."
|
|
-- ::= { dscpMappingEntry 2 }
|
|
|
|
dscpMapPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mapping p bits that will replace the source p bits in the incoming packet."
|
|
::= { dscpMappingEntry 3 }
|
|
|
|
--- pfchen
|
|
dscpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DscpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains DSCP mapping configuration for the adsl ports."
|
|
::= { dscp 2 }
|
|
|
|
dscpPortEntry OBJECT-TYPE
|
|
SYNTAX DscpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dscpPortTable."
|
|
INDEX { ifIndex }
|
|
::= { dscpPortTable 1 }
|
|
|
|
DscpPortEntry ::=
|
|
SEQUENCE {
|
|
dscpStatusEnable INTEGER
|
|
}
|
|
|
|
dscpStatusEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP port status."
|
|
::= { dscpPortEntry 1 }
|
|
|
|
--------------------
|
|
-- Vlan Isolation
|
|
--------------------
|
|
|
|
vlanIsolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanIsolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains configuration of isolated VLAN."
|
|
::= { vlanIsolation 1 }
|
|
|
|
vlanIsolationEntry OBJECT-TYPE
|
|
SYNTAX VlanIsolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of vlanIsolationTable."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { vlanIsolationTable 1 }
|
|
|
|
VlanIsolationEntry ::=
|
|
SEQUENCE {
|
|
vlanIsolationRowStatus INTEGER
|
|
}
|
|
|
|
vlanIsolationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status of the table used to create/delete an entry."
|
|
::= { vlanIsolationEntry 1 }
|
|
|
|
--------------------
|
|
-- enet MTU
|
|
--------------------
|
|
|
|
enetMtuEntry OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526."
|
|
::= { enetMtu 1 }
|
|
|
|
--------------------
|
|
-- TPID (Tag Protocol Identifier)
|
|
--------------------
|
|
|
|
tpidEntry OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF."
|
|
::= { tpid 1 }
|
|
|
|
--------------------
|
|
-- CFM
|
|
--------------------
|
|
|
|
-- cfmLoopbackPortTable
|
|
|
|
cfmLoopbackPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfmLoopbackPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains CFM information."
|
|
::= { cfm 1 }
|
|
|
|
cfmLoopbackPortEntry OBJECT-TYPE
|
|
SYNTAX CfmLoopbackPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in cfmLoopbackPortTable."
|
|
INDEX { ifIndex }
|
|
::= { cfmLoopbackPortTable 1 }
|
|
|
|
CfmLoopbackPortEntry ::= SEQUENCE {
|
|
cfmLoopbackPortState INTEGER
|
|
}
|
|
|
|
cfmLoopbackPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM loopback enable/disable on the port."
|
|
::= { cfmLoopbackPortEntry 1 }
|
|
|
|
-- cfmMIPTable
|
|
|
|
cfmMIPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfmMIPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { cfm 2 }
|
|
|
|
cfmMIPEntry OBJECT-TYPE
|
|
SYNTAX CfmMIPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in cfmMIPTable."
|
|
INDEX { dot1agCfmMdIndex, cfmPort }
|
|
::= { cfmMIPTable 1 }
|
|
|
|
CfmMIPEntry ::=
|
|
SEQUENCE {
|
|
cfmPort INTEGER,
|
|
cfmMIPRowStatus RowStatus,
|
|
cfmMIPMacAddr PhysAddress
|
|
}
|
|
|
|
-- cfmLevel OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { cfmMIPEntry 1 }
|
|
--
|
|
-- cfmVlanID OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { cfmMIPEntry 2 }
|
|
|
|
cfmPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { cfmMIPEntry 3 }
|
|
|
|
cfmMIPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { cfmMIPEntry 4 }
|
|
|
|
cfmMIPMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM MIP mac address"
|
|
::= { cfmMIPEntry 5 }
|
|
|
|
cfmActionEnableStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM Action enable status for the CO device"
|
|
::= { cfm 3 }
|
|
|
|
cfmMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mode802Dot1Ag(1),
|
|
modeYDot1731(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM follow standard mode"
|
|
::= { cfm 4 }
|
|
|
|
cfmLbmTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (100..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM LBM timeout, 100-86400 ms"
|
|
::= { cfm 5 }
|
|
|
|
cfmLbmDataTlvLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM LBM data tlv length, 0-1400 bytes"
|
|
::= { cfm 6 }
|
|
|
|
-- cfmLbrTable
|
|
|
|
cfmLbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfmLbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains CFM LBR results."
|
|
::= { cfm 7 }
|
|
|
|
cfmLbrEntry OBJECT-TYPE
|
|
SYNTAX CfmLbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in cfmLbrTable."
|
|
INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, cfmLbmIndex, cfmLbrIndex}
|
|
::= { cfmLbrTable 1 }
|
|
|
|
CfmLbrEntry ::= SEQUENCE {
|
|
cfmLbmIndex INTEGER,
|
|
cfmLbrIndex INTEGER,
|
|
cfmLbrSrcMac PhysAddress,
|
|
cfmLbrStatus INTEGER,
|
|
cfmLbrRtt INTEGER
|
|
}
|
|
|
|
cfmLbmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM lbm index."
|
|
::= { cfmLbrEntry 1 }
|
|
|
|
cfmLbrIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM lbr index."
|
|
::= { cfmLbrEntry 2 }
|
|
|
|
cfmLbrSrcMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM lbr source address."
|
|
::= { cfmLbrEntry 3 }
|
|
|
|
cfmLbrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
notready(2),
|
|
xmit(3),
|
|
success(4),
|
|
timeout(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM lbr status."
|
|
::= { cfmLbrEntry 4 }
|
|
|
|
cfmLbrRtt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM lbr rtt in ms."
|
|
::= { cfmLbrEntry 5 }
|
|
|
|
--------------------
|
|
-- DHCP Relay
|
|
--------------------
|
|
dhcpRelay82Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpRelay82Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains DHCP Relay configuration."
|
|
::= { dhcp 2 }
|
|
|
|
dhcpRelay82Entry OBJECT-TYPE
|
|
SYNTAX DhcpRelay82Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of DHCP Relay table."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { dhcpRelay82Table 1 }
|
|
|
|
DhcpRelay82Entry ::=
|
|
SEQUENCE {
|
|
dhcpRelay82PrimaryServer IpAddress,
|
|
dhcpRelay82SecondaryServer IpAddress,
|
|
dhcpRelay82ActiveServer INTEGER,
|
|
dhcpRelay82Enable INTEGER,
|
|
dhcpRelay82Info DisplayString,
|
|
dhcpRelay82RelayMode INTEGER,
|
|
dhcpRelay82Suboption2Enable INTEGER,
|
|
dhcpRelay82Suboption2Info DisplayString,
|
|
dhcpRelay82EntryEnable INTEGER,
|
|
dhcpRelay82EntryOptionMode INTEGER,
|
|
dhcpRelay82VlanIp IpAddress,
|
|
dhcpRelay82VlanMask INTEGER,
|
|
dhcpRelay82VlanGateway IpAddress,
|
|
dhcpRelay82ThirdServer IpAddress,
|
|
dhcpRelay82FourthServer IpAddress,
|
|
dhcpRelay82FifthServer IpAddress,
|
|
dhcpRelay82ServerVid INTEGER
|
|
}
|
|
|
|
dhcpRelay82PrimaryServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Relay primary server."
|
|
::= { dhcpRelay82Entry 1 }
|
|
|
|
dhcpRelay82SecondaryServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Relay secondary server."
|
|
::= { dhcpRelay82Entry 2 }
|
|
|
|
dhcpRelay82ActiveServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
third(3),
|
|
fourth(4),
|
|
fifth(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current active DHCP Relay server."
|
|
::= { dhcpRelay82Entry 3 }
|
|
|
|
dhcpRelay82Enable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable DHCP relay and Option82 function."
|
|
::= { dhcpRelay82Entry 4 }
|
|
|
|
dhcpRelay82Info OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..23))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User specific Option82 information."
|
|
::= { dhcpRelay82Entry 5 }
|
|
|
|
dhcpRelay82RelayMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
all(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP relay mode."
|
|
::= { dhcpRelay82Entry 6 }
|
|
|
|
|
|
dhcpRelay82Suboption2Enable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable Option 82 sub-option 2."
|
|
::= { dhcpRelay82Entry 8 }
|
|
|
|
dhcpRelay82Suboption2Info OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User specified information for Option 82 sub-option 2."
|
|
::= { dhcpRelay82Entry 9 }
|
|
|
|
dhcpRelay82EntryEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
all(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable DHCP Relay"
|
|
::= { dhcpRelay82Entry 10 }
|
|
|
|
dhcpRelay82EntryOptionMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
private(1),
|
|
tr101(2),
|
|
customer-remote-id(3),
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option82 format."
|
|
::= { dhcpRelay82Entry 11 }
|
|
|
|
dhcpRelay82VlanIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Relay interface for this VLAN."
|
|
::= { dhcpRelay82Entry 12 }
|
|
|
|
dhcpRelay82VlanMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask of the DHCP Relay interface for this VLAN."
|
|
::= { dhcpRelay82Entry 13 }
|
|
|
|
dhcpRelay82VlanGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway of the DHCP Relay interface for this VLAN."
|
|
::= { dhcpRelay82Entry 14 }
|
|
|
|
dhcpRelay82ThirdServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Relay third server."
|
|
::= { dhcpRelay82Entry 15 }
|
|
|
|
dhcpRelay82FourthServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Relay fourth server."
|
|
::= { dhcpRelay82Entry 16 }
|
|
|
|
|
|
dhcpRelay82FifthServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Relay fifth server."
|
|
::= { dhcpRelay82Entry 17 }
|
|
|
|
dhcpRelay82ServerVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VID of the DHCP Relay server for this VLAN."
|
|
::= { dhcpRelay82Entry 18 }
|
|
|
|
-- dhcpRelayTest
|
|
dhcpRelayTest OBJECT IDENTIFIER ::= { dhcp 8 }
|
|
|
|
dhcpRelayTestVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting the VID of the test server."
|
|
::= { dhcpRelayTest 1 }
|
|
|
|
dhcpRelayTestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting the IP of the test server."
|
|
::= { dhcpRelayTest 2 }
|
|
|
|
dhcpRelayTestOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the object to 1 to test DHCP server."
|
|
::= { dhcpRelayTest 3 }
|
|
|
|
dhcpRelayTestStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display testing server status."
|
|
::= { dhcpRelayTest 4 }
|
|
|
|
-- dhcpRelayArp
|
|
dhcpRelayArp OBJECT IDENTIFIER ::= { dhcp 9 }
|
|
|
|
dhcpRelayArpShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpRelayArpShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table displays DHCP ARP."
|
|
::= { dhcpRelayArp 1 }
|
|
|
|
dhcpRelayArpShowEntry OBJECT-TYPE
|
|
SYNTAX DhcpRelayArpShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dhcpRelayArpShowTable."
|
|
INDEX { dhcpRelayArpShowVid, dhcpRelayArpShowIp }
|
|
::= { dhcpRelayArpShowTable 1 }
|
|
|
|
DhcpRelayArpShowEntry ::=
|
|
SEQUENCE {
|
|
dhcpRelayArpShowVid INTEGER,
|
|
dhcpRelayArpShowIp IpAddress,
|
|
dhcpRelayArpShowMac PhysAddress
|
|
}
|
|
|
|
dhcpRelayArpShowVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the VID of the DHCP ARP entry."
|
|
::= { dhcpRelayArpShowEntry 1 }
|
|
|
|
dhcpRelayArpShowIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the IP of the DHCP ARP entry."
|
|
::= { dhcpRelayArpShowEntry 2 }
|
|
|
|
dhcpRelayArpShowMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the MAC of the DHCP ARP entry."
|
|
::= { dhcpRelayArpShowEntry 3 }
|
|
|
|
dhcpRelayArpFlushOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the object to 1 to start flushing."
|
|
::= { dhcpRelayArp 2 }
|
|
|
|
--------------------
|
|
-- MAC Filter
|
|
--------------------
|
|
|
|
-- MAC Filter Port Table
|
|
|
|
macFilterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFilterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the status of mac filtering for each port."
|
|
::= { macfilter 1 }
|
|
|
|
macFilterPortEntry OBJECT-TYPE
|
|
SYNTAX MacFilterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in macFilterPortTable."
|
|
INDEX { ifIndex }
|
|
::= { macFilterPortTable 1 }
|
|
|
|
MacFilterPortEntry ::=
|
|
SEQUENCE {
|
|
macFilterPortEnable INTEGER,
|
|
macFilterPortMacCount INTEGER,
|
|
macFilterPortFilterMode INTEGER
|
|
}
|
|
|
|
macFilterPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enableMacFilter(1),
|
|
enableMacCount(2),
|
|
-- enableOuiFilter(3),
|
|
disable(4),
|
|
enableMacFilterAndMacCount(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable MAC filtering for the port."
|
|
::= { macFilterPortEntry 1 }
|
|
|
|
macFilterPortMacCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of MAC addresses allowed for the port."
|
|
::= { macFilterPortEntry 2 }
|
|
|
|
macFilterPortFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
accept(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mac filter mode (accept or deny) for the port."
|
|
::= { macFilterPortEntry 3 }
|
|
|
|
maxNumOfMacFiltersInSystem OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max number of mac filters supported in the system."
|
|
::= { macfilter 2 }
|
|
|
|
maxNumOfMacFiltersPerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max number of mac filters supported per port."
|
|
::= { macfilter 3 }
|
|
|
|
currNumOfMacFiltersInSystem OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of mac filters in the system."
|
|
::= { macfilter 4 }
|
|
|
|
-- MAC Table
|
|
|
|
macFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the mac filter addresses."
|
|
::= { macfilter 5 }
|
|
|
|
macFilterEntry OBJECT-TYPE
|
|
SYNTAX MacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of macFilterTable."
|
|
INDEX { ifIndex, macFilterAddr }
|
|
::= { macFilterTable 1 }
|
|
|
|
MacFilterEntry ::=
|
|
SEQUENCE {
|
|
macFilterAddr PhysAddress,
|
|
macFilterRowStatus RowStatus
|
|
}
|
|
|
|
macFilterAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mac address which can pass through or be rejected from the port."
|
|
::= { macFilterEntry 1 }
|
|
|
|
macFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of the entry."
|
|
::= { macFilterEntry 2 }
|
|
|
|
-- Batch Set for MAC Filter
|
|
|
|
macfilterBatchSet OBJECT IDENTIFIER ::= { macfilter 6 }
|
|
|
|
macfilterTarget OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This managed object is used for identify the target on which
|
|
the port configuration should be performed. The target is encoded as:
|
|
Byte 1: 0, Reserved(chassis)
|
|
Byte 2~3: 0, Reserved(slot)
|
|
Byte 4: 0, reserved
|
|
Byte 5~11:each octet specifies a set of eight ports, with the first
|
|
octet specifying ports 1 through 8, etc."
|
|
::= { macfilterBatchSet 1 }
|
|
|
|
macfilterOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding bit is set to 1 to start the operation.
|
|
The various bit positions are:
|
|
BIT 1: enable mac filter
|
|
BIT 2: enable mac count filter
|
|
BIT 3: disable mac filter
|
|
BIT 4: set mac count
|
|
BIT 5: disable mac count filter."
|
|
::= { macfilterBatchSet 2 }
|
|
|
|
macFilterMacCountForBatchSet OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of MAC addresses allowed for a port."
|
|
::= { macfilterBatchSet 3 }
|
|
|
|
|
|
-- OUI Filter Table
|
|
|
|
ouiFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OuiFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the OUI filter addresses."
|
|
::= { macfilter 7 }
|
|
|
|
ouiFilterEntry OBJECT-TYPE
|
|
SYNTAX OuiFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of ouiFilterTable."
|
|
INDEX { ifIndex, ouiFilterAddr }
|
|
::= { ouiFilterTable 1 }
|
|
|
|
OuiFilterEntry ::=
|
|
SEQUENCE {
|
|
ouiFilterAddr OCTET STRING,
|
|
ouiFilterRowStatus RowStatus
|
|
}
|
|
|
|
ouiFilterAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first three bytes of the mac address which can pass through or be rejected from the port."
|
|
::= { ouiFilterEntry 1 }
|
|
|
|
ouiFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of the entry."
|
|
::= { ouiFilterEntry 2 }
|
|
|
|
maxNumOfOuiFiltersPerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max number of OUI filters supported per port."
|
|
::= { macfilter 8 }
|
|
|
|
|
|
ouiFilterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OuiFilterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the status of oui filtering for each port."
|
|
::= { macfilter 9 }
|
|
|
|
ouiFilterPortEntry OBJECT-TYPE
|
|
SYNTAX OuiFilterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in macFilterPortTable."
|
|
INDEX { ifIndex }
|
|
::= { ouiFilterPortTable 1 }
|
|
|
|
OuiFilterPortEntry ::=
|
|
SEQUENCE {
|
|
ouiFilterPortEnable INTEGER,
|
|
ouiFilterPortFilterMode INTEGER
|
|
}
|
|
|
|
|
|
ouiFilterPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enableOuiFilter(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable oui filtering for the port."
|
|
::= { ouiFilterPortEntry 1 }
|
|
|
|
|
|
|
|
ouiFilterPortFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
accept(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The oui filter mode (accept or deny) for the port."
|
|
::= { ouiFilterPortEntry 2 }
|
|
|
|
--------------------
|
|
-- DHCP Snoop
|
|
--------------------
|
|
|
|
-- dhcpSnoopPortTable
|
|
|
|
dhcpSnoopPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpSnoopPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes DHCP snooping enable/disable for each port."
|
|
::= { dhcpSnoop 1 }
|
|
|
|
dhcpSnoopPortEntry OBJECT-TYPE
|
|
SYNTAX DhcpSnoopPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dhcpSnoopPortTable."
|
|
INDEX { ifIndex }
|
|
::= { dhcpSnoopPortTable 1 }
|
|
|
|
DhcpSnoopPortEntry ::=
|
|
SEQUENCE {
|
|
dhcpSnoopEnable INTEGER,
|
|
dhcpSnoopMaxcnt INTEGER,
|
|
dhcpSnoopSmacverifyEnable INTEGER
|
|
}
|
|
|
|
dhcpSnoopEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable DHCP snooping for a port."
|
|
::= { dhcpSnoopPortEntry 1 }
|
|
|
|
dhcpSnoopMaxcnt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the max entries of the DHCP ARP table."
|
|
::= { dhcpSnoopPortEntry 2 }
|
|
|
|
dhcpSnoopSmacverifyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable DHCP source MAC verify for a port."
|
|
::= { dhcpSnoopPortEntry 3 }
|
|
|
|
|
|
-- dhcpSnoopOperation
|
|
|
|
dhcpSnoopTarget OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This managed object is used for identify the target on which
|
|
the operation should be performed. The target is encoded as:
|
|
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
|
|
Byte 2~3: each octet specifies a set of eight slots, with the
|
|
first octet specifying slots 1 through 8 and the second
|
|
octet specifying slots 9 through 16.
|
|
Byte 4: reserved
|
|
Byte 5~11:each octet specifies a set of eight ports, with the first
|
|
octet specifying ports 1 through 8, etc."
|
|
::= { dhcpSnoop 2 }
|
|
|
|
dhcpSnoopOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding bit is set to 1 to start the operation.
|
|
The various bit positions are:
|
|
BIT 1: DHCP snooping table flush."
|
|
::= { dhcpSnoop 3 }
|
|
|
|
-- dhcpStaticTable
|
|
|
|
dhcpStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines DHCP static IP addresses."
|
|
::= { dhcpSnoop 4 }
|
|
|
|
dhcpStaticEntry OBJECT-TYPE
|
|
SYNTAX DhcpStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dhcpStaticTable."
|
|
INDEX { ifIndex, dhcpStaticIpAddr }
|
|
::= { dhcpStaticTable 1 }
|
|
|
|
DhcpStaticEntry ::=
|
|
SEQUENCE {
|
|
dhcpStaticIpAddr IpAddress,
|
|
dhcpStaticRowStatus RowStatus
|
|
}
|
|
|
|
dhcpStaticIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address which can pass through the port."
|
|
::= { dhcpStaticEntry 1 }
|
|
|
|
dhcpStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status of the table entry."
|
|
::= { dhcpStaticEntry 2 }
|
|
|
|
maxNumOfDhcpStaticIp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of DHCP static IP addresses which can be created for a port."
|
|
::= { dhcpSnoop 5 }
|
|
|
|
dhcpSnoopMaxcntMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
replace(1),
|
|
drop(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1."
|
|
::= { dhcpSnoop 6 }
|
|
|
|
--------------------
|
|
-- ACL Rule
|
|
--------------------
|
|
|
|
-- aclSetTable
|
|
|
|
aclSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AclSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aclsetTable."
|
|
::= { acl 1 }
|
|
|
|
aclSetEntry OBJECT-TYPE
|
|
SYNTAX AclSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of aclSetTable."
|
|
INDEX { ifIndex, aclSetVpi, aclSetVci, aclSetProfileName }
|
|
::= { aclSetTable 1 }
|
|
|
|
AclSetEntry ::=
|
|
SEQUENCE {
|
|
aclSetVpi INTEGER,
|
|
aclSetVci INTEGER,
|
|
aclSetProfileName DisplayString,
|
|
aclSetRowStatus RowStatus
|
|
}
|
|
|
|
aclSetVpi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI value"
|
|
::= { aclSetEntry 1 }
|
|
|
|
aclSetVci OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI value"
|
|
::= { aclSetEntry 2 }
|
|
|
|
aclSetProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL Profile name"
|
|
::= { aclSetEntry 3 }
|
|
|
|
aclSetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus of aclSetEntry"
|
|
::= { aclSetEntry 4 }
|
|
|
|
-- aclProfileTable
|
|
|
|
aclProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AclProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aclProfileTable."
|
|
::= { acl 2 }
|
|
|
|
aclProfileEntry OBJECT-TYPE
|
|
SYNTAX AclProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of aclProfileTable."
|
|
INDEX { aclProfileRuleName }
|
|
::= { aclProfileTable 1 }
|
|
|
|
AclProfileEntry ::=
|
|
SEQUENCE {
|
|
aclProfileRuleName DisplayString,
|
|
aclProfileRuleNumber INTEGER,
|
|
aclProfileActionNumber INTEGER,
|
|
aclProfileRuleParamMask INTEGER,
|
|
aclProfileRuleEtype INTEGER,
|
|
aclProfileRuleVid INTEGER,
|
|
aclProfileRuleSmac PhysAddress,
|
|
aclProfileRuleDmac PhysAddress,
|
|
aclProfileRulePriority INTEGER,
|
|
aclProfileRuleProtocol INTEGER,
|
|
-- aclProfileRuleSrcIP IpAddress,
|
|
-- aclProfileRuleSrcIPMask INTEGER,
|
|
-- aclProfileRuleDestIP IpAddress,
|
|
-- aclProfileRuleDestIPMask INTEGER,
|
|
-- aclProfileRuleStartTos INTEGER,
|
|
-- aclProfileRuleEndTos INTEGER,
|
|
-- aclProfileRuleSrcStartPort INTEGER,
|
|
-- aclProfileRuleSrcEndPort INTEGER,
|
|
-- aclProfileRuleDestStartPort INTEGER,
|
|
-- aclProfileRuleDestEndPort INTEGER,
|
|
aclProfileActionRate INTEGER,
|
|
aclProfileActionrvlan INTEGER,
|
|
aclProfileActionrpri INTEGER,
|
|
aclProfileRowStatus RowStatus,
|
|
aclProfileRuleSip IpAddress,
|
|
aclProfileRuleDip IpAddress,
|
|
aclProfileRuleSport INTEGER,
|
|
aclProfileRuleDport INTEGER
|
|
|
|
}
|
|
|
|
aclProfileRuleName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule name"
|
|
::= { aclProfileEntry 1 }
|
|
|
|
aclProfileRuleNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The managed object is for acl profile rule configuration.
|
|
etype <etype> vlan <vid> (1),
|
|
etype <etype> smac <mac> (2),
|
|
etype <etype> dmac <mac> (3),
|
|
vlan <vid> smac <mac> (4),
|
|
vlan <vid> dmac <mac> (5),
|
|
smac <mac> dmac <mac> (6),
|
|
vlan <vid> priority <priority> (7),
|
|
etype <etype> (8),
|
|
vlan <vid> (9),
|
|
smac <mac> (10),
|
|
dmac <mac> (11),
|
|
priority <priority> (12),
|
|
protocol <protocol> (13),
|
|
vlan <vid> sip <ip> (14),
|
|
vlan <vid> dip <ip> (15),
|
|
vlan <vid> sport tcp|udp <port> (16),
|
|
vlan <vid> dport tcp|udp <port> (17) "
|
|
::= { aclProfileEntry 2 }
|
|
|
|
aclProfileActionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile action number.
|
|
Bit 1: rate
|
|
Bit 2: rvlan
|
|
Bit 3: rpri
|
|
Bit 4: deny
|
|
Bit 1, Bit 2 & Bit 3 can multiple selection."
|
|
::= { aclProfileEntry 3 }
|
|
|
|
aclProfileRuleParamMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule parameter mask.
|
|
BIT 1: srcip <ip>/<mask>
|
|
BIT 2: dstip <ip>/<mask>
|
|
BIT 3: tos <stos> <etos>
|
|
BIT 4: srcport <sport> <eport>
|
|
BIT 5: dstport <sport> <eport>"
|
|
::= { aclProfileEntry 4 }
|
|
|
|
aclProfileRuleEtype OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule etype"
|
|
::= { aclProfileEntry 5 }
|
|
|
|
aclProfileRuleVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule vid"
|
|
::= { aclProfileEntry 6 }
|
|
|
|
aclProfileRuleSmac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule source MAC"
|
|
::= { aclProfileEntry 7 }
|
|
|
|
aclProfileRuleDmac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule destination MAC"
|
|
::= { aclProfileEntry 8 }
|
|
|
|
aclProfileRulePriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule priority"
|
|
::= { aclProfileEntry 9 }
|
|
|
|
aclProfileRuleProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile rule protocol.
|
|
icmp(1),igmp(2),ip(4),tcp(6),
|
|
udp(17),gre(47),ospf(89),
|
|
other ptype"
|
|
::= { aclProfileEntry 10 }
|
|
|
|
-- aclProfileRuleSrcIP OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule source IP"
|
|
-- ::= { aclProfileEntry 11 }
|
|
--
|
|
-- aclProfileRuleSrcIPMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..32)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The subnet mask of source IP mask"
|
|
-- ::= { aclProfileEntry 12 }
|
|
--
|
|
-- aclProfileRuleDestIP OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule source IP"
|
|
-- ::= { aclProfileEntry 13 }
|
|
--
|
|
-- aclProfileRuleDestIPMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..32)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The subnet mask of dest IP mask"
|
|
-- ::= { aclProfileEntry 14 }
|
|
--
|
|
-- aclProfileRuleStartTos OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule start type of service"
|
|
-- ::= { aclProfileEntry 15 }
|
|
--
|
|
-- aclProfileRuleEndTos OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule end type of service"
|
|
-- ::= { aclProfileEntry 16 }
|
|
--
|
|
-- aclProfileRuleSrcStartPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule source start port"
|
|
-- ::= { aclProfileEntry 17 }
|
|
--
|
|
-- aclProfileRuleSrcEndPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule source end port"
|
|
-- ::= { aclProfileEntry 18 }
|
|
--
|
|
-- aclProfileRuleDestStartPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule destination start port"
|
|
-- ::= { aclProfileEntry 19 }
|
|
--
|
|
-- aclProfileRuleDestEndPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Profile rule destination end port"
|
|
-- ::= { aclProfileEntry 20 }
|
|
|
|
aclProfileActionRate OBJECT-TYPE
|
|
SYNTAX INTEGER (32..65472)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile action to replace to this rate"
|
|
::= { aclProfileEntry 21 }
|
|
|
|
aclProfileActionrvlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile action to replace to this vlan"
|
|
::= { aclProfileEntry 22 }
|
|
|
|
aclProfileActionrpri OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile action to replace to this priority"
|
|
::= { aclProfileEntry 23 }
|
|
|
|
aclProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of the entry."
|
|
::= { aclProfileEntry 24 }
|
|
|
|
aclProfileRuleSip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source IP."
|
|
::= { aclProfileEntry 25 }
|
|
|
|
aclProfileRuleDip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination IP."
|
|
::= { aclProfileEntry 26 }
|
|
|
|
aclProfileRuleSport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source port."
|
|
::= { aclProfileEntry 27 }
|
|
|
|
aclProfileRuleDport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination port."
|
|
::= { aclProfileEntry 28 }
|
|
|
|
|
|
--------------------
|
|
-- PPPoE Agent
|
|
--------------------
|
|
|
|
-- pppoeAgentTable
|
|
|
|
pppoeAgentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PppoeAgentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains PPPoE intermediate agent configuration."
|
|
::= { pppoeAgent 1 }
|
|
|
|
pppoeAgentEntry OBJECT-TYPE
|
|
SYNTAX PppoeAgentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of pppoeAgentTable."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { pppoeAgentTable 1 }
|
|
|
|
PppoeAgentEntry ::=
|
|
SEQUENCE {
|
|
pppoeAgentEnable INTEGER,
|
|
pppoeAgentInfo DisplayString,
|
|
pppoeAgentRowStatus RowStatus,
|
|
pppoeAgentOptionMode INTEGER
|
|
}
|
|
|
|
pppoeAgentEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable PppoE intermediate agent function."
|
|
::= { pppoeAgentEntry 1 }
|
|
|
|
pppoeAgentInfo OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..23))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User specific Option82 information."
|
|
::= { pppoeAgentEntry 2 }
|
|
|
|
pppoeAgentRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status of the table entry."
|
|
::= { pppoeAgentEntry 3 }
|
|
|
|
pppoeAgentOptionMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
private(1),
|
|
tr101(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option82 format."
|
|
::= { pppoeAgentEntry 4 }
|
|
|
|
maxNumOfPppoeAgentConf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows that can be created in pppoeAgentTable."
|
|
::= { pppoeAgent 2 }
|
|
|
|
|
|
--------------------
|
|
-- n1mac
|
|
--------------------
|
|
n1macReplaceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MAC address will be used to replace client's MAC address."
|
|
::= { n1mac 1 }
|
|
|
|
n1macPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF N1macPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains N to 1 MAC configuration for DSL ports."
|
|
::= { n1mac 2 }
|
|
|
|
n1macPortEntry OBJECT-TYPE
|
|
SYNTAX N1macPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of n1macPortTable."
|
|
INDEX { ifIndex }
|
|
::= { n1macPortTable 1 }
|
|
|
|
N1macPortEntry ::=
|
|
SEQUENCE {
|
|
n1macStatusEnable INTEGER
|
|
}
|
|
|
|
n1macStatusEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port status of n1mac function."
|
|
::= { n1macPortEntry 1 }
|
|
|
|
----------------------------------------
|
|
-- macff
|
|
----------------------------------------
|
|
macFfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MAC Force Forwarding configuration."
|
|
::= { macff 1 }
|
|
|
|
macFfEntry OBJECT-TYPE
|
|
SYNTAX MacFfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfTable."
|
|
INDEX { macFfIndex }
|
|
::= { macFfTable 1 }
|
|
|
|
MacFfEntry ::=
|
|
SEQUENCE {
|
|
macFfIndex INTEGER,
|
|
macFfVid INTEGER,
|
|
macFfArIP IpAddress,
|
|
-- macFfArMask INTEGER,
|
|
macFfSrcIP IpAddress,
|
|
macFfSrcMask INTEGER,
|
|
macFfRowStatus RowStatus
|
|
}
|
|
|
|
macFfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the MACFF."
|
|
::= { macFfEntry 1 }
|
|
|
|
macFfVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID refering to this AR/AS."
|
|
::= { macFfEntry 2 }
|
|
|
|
|
|
macFfArIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of this AR/AS"
|
|
::= { macFfEntry 3 }
|
|
|
|
macFfSrcIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of the MACFF."
|
|
::= { macFfEntry 4 }
|
|
|
|
macFfSrcMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of source IP mask."
|
|
::= { macFfEntry 5 }
|
|
|
|
|
|
macFfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of the MacFfEntry entry."
|
|
::= { macFfEntry 6 }
|
|
|
|
|
|
macFfArpFlush OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the object to 1 to flush mac table."
|
|
::= { macff 3 }
|
|
|
|
maxNumOfMacFfVlanInSystem OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max number of macff Vlans supported in the system."
|
|
::= { macff 4 }
|
|
|
|
macFfVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MAC Force Forwarding Vlan configuration."
|
|
::= { macff 5 }
|
|
|
|
macFfVlanEntry OBJECT-TYPE
|
|
SYNTAX MacFfVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfVlanTable."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { macFfVlanTable 1 }
|
|
|
|
MacFfVlanEntry ::=
|
|
SEQUENCE {
|
|
macFfVlanRowstatus INTEGER
|
|
-- macFfVlanUnknownUnicast INTEGER removed since R3.1
|
|
}
|
|
|
|
macFfVlanRowstatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status of the table used to create/delete an entry."
|
|
::= { macFfVlanEntry 1 }
|
|
-- removed since R3.1
|
|
-- macFfVlanUnknownUnicast OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- flood(1),
|
|
-- drop(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Setting downstream unknown uni-cast packet on macff vlan to flooding or dropping."
|
|
-- ::= { macFfVlanEntry 2 }
|
|
|
|
macFfStaticIPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfStaticIPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { macff 6 }
|
|
|
|
macFfStaticIPEntry OBJECT-TYPE
|
|
SYNTAX MacFfStaticIPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfTable."
|
|
INDEX { macFfStaticIPPort, macFfStaticIPVid, macFfstaticIP , macFfStaticIPMask}
|
|
::= { macFfStaticIPTable 1 }
|
|
|
|
MacFfStaticIPEntry ::=
|
|
SEQUENCE {
|
|
macFfStaticIPPort INTEGER,
|
|
macFfStaticIPVid INTEGER,
|
|
macFfstaticIP IpAddress,
|
|
macFfStaticIPMask INTEGER,
|
|
macFfStaticIPRowStatus RowStatus
|
|
}
|
|
|
|
macFfStaticIPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The port number, 1 ~ 48."
|
|
::= { macFfStaticIPEntry 1 }
|
|
|
|
macFfStaticIPVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first."
|
|
::= { macFfStaticIPEntry 2 }
|
|
|
|
|
|
macFfstaticIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The specified IP range."
|
|
::= { macFfStaticIPEntry 3 }
|
|
|
|
macFfStaticIPMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mask_bits is 24 .. 32."
|
|
::= { macFfStaticIPEntry 4 }
|
|
|
|
|
|
macFfStaticIPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status used to configure the table entry."
|
|
::= { macFfStaticIPEntry 5 }
|
|
|
|
-- Server Mac --
|
|
|
|
macFfServerMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfServerMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { macff 7 }
|
|
|
|
macFfServerMacEntry OBJECT-TYPE
|
|
SYNTAX MacFfServerMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfTable."
|
|
INDEX { macFfServerMacVid, macFfServerMacAddr}
|
|
::= { macFfServerMacTable 1 }
|
|
|
|
MacFfServerMacEntry ::=
|
|
SEQUENCE {
|
|
macFfServerMacVid INTEGER,
|
|
macFfServerMacAddr PhysAddress,
|
|
macFfServerMacRowStatus RowStatus
|
|
}
|
|
|
|
macFfServerMacVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first."
|
|
::= { macFfServerMacEntry 1 }
|
|
|
|
macFfServerMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mac address."
|
|
::= { macFfServerMacEntry 2 }
|
|
|
|
macFfServerMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status used to configure the table entry."
|
|
::= { macFfServerMacEntry 3 }
|
|
|
|
----------------------------------------
|
|
-- sys
|
|
----------------------------------------
|
|
timeSetup OBJECT IDENTIFIER ::= { sys 4 }
|
|
accessCtrl OBJECT IDENTIFIER ::= { sys 5 }
|
|
extAlarm OBJECT IDENTIFIER ::= { sys 8 }
|
|
user OBJECT IDENTIFIER ::= { sys 9 }
|
|
usbCastCtrl OBJECT IDENTIFIER ::= { sys 10}
|
|
dsQos OBJECT IDENTIFIER ::= { sys 11}
|
|
fwUpgrade OBJECT IDENTIFIER ::= { sys 14}
|
|
delayedReboot OBJECT IDENTIFIER ::= {sys 15}
|
|
|
|
stdioTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the stdio timeout, 0~300 minutes."
|
|
::= { sys 12 }
|
|
|
|
isConfigChanged OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If system configuration has been changed."
|
|
::= { sys 13 }
|
|
|
|
--------------------
|
|
-- Time Setup
|
|
--------------------
|
|
-- dayLightSaving
|
|
|
|
dayLightSaving OBJECT IDENTIFIER ::= { timeSetup 7 }
|
|
|
|
dayLightSavingAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSaving 1 }
|
|
|
|
dayLightSavingStartTime OBJECT IDENTIFIER ::= { dayLightSaving 2 }
|
|
|
|
dayLightSavingStartMonth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
Jan(1),
|
|
Feb(2),
|
|
Mar(3),
|
|
Apr(4),
|
|
May(5),
|
|
Jun(6),
|
|
Jul(7),
|
|
Aug(8),
|
|
Sep(9),
|
|
Oct(10),
|
|
Nov(11),
|
|
Dec(12)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSavingStartTime 1 }
|
|
|
|
dayLightSavingStartWeek OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
First(1),
|
|
Second(2),
|
|
Third(3),
|
|
Fourth(4),
|
|
Last(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSavingStartTime 2 }
|
|
|
|
dayLightSavingStartWday OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
Sun(1),
|
|
Mon(2),
|
|
Tus(3),
|
|
Wed(4),
|
|
Thu(5),
|
|
Fri(6),
|
|
Sat(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSavingStartTime 3 }
|
|
|
|
dayLightSavingStartHour OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
"0:00"(0),
|
|
"1:00"(1),
|
|
"2:00"(2),
|
|
"3:00"(3),
|
|
"4:00"(4),
|
|
"5:00"(5),
|
|
"6:00"(6),
|
|
"7:00"(7),
|
|
"8:00"(8),
|
|
"9:00"(9),
|
|
"10:00"(10),
|
|
"11:00"(11),
|
|
"12:00"(12),
|
|
"13:00"(13),
|
|
"14:00"(14),
|
|
"15:00"(15),
|
|
"16:00"(16),
|
|
"17:00"(17),
|
|
"18:00"(18),
|
|
"19:00"(19),
|
|
"20:00"(20),
|
|
"21:00"(21),
|
|
"22:00"(22),
|
|
"23:00"(23),
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: 01:00,
|
|
2: 02:00
|
|
3: 03:00
|
|
4: 04:00
|
|
5: 05:00
|
|
6: 06:00
|
|
7: 07:00
|
|
8: 08:00
|
|
9: 09:00
|
|
10: 10:00
|
|
11: 11:00
|
|
12: 12:00
|
|
13: 13:00
|
|
14: 14:00
|
|
15: 15:00
|
|
16: 16:00
|
|
17: 17:00
|
|
18: 18:00
|
|
19: 19:00
|
|
20: 20:00
|
|
21: 21:00
|
|
22: 22:00
|
|
23: 23:00"
|
|
::= { dayLightSavingStartTime 4 }
|
|
|
|
|
|
dayLightSavingEndTime OBJECT IDENTIFIER ::= { dayLightSaving 3 }
|
|
|
|
dayLightSavingEndMonth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
Jan(1),
|
|
Feb(2),
|
|
Mar(3),
|
|
Apr(4),
|
|
May(5),
|
|
Jun(6),
|
|
Jul(7),
|
|
Aug(8),
|
|
Sep(9),
|
|
Oct(10),
|
|
Nov(11),
|
|
Dec(12)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSavingEndTime 1 }
|
|
|
|
dayLightSavingEndWeek OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
First(1),
|
|
Second(2),
|
|
Third(3),
|
|
Fourth(4),
|
|
Last(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSavingEndTime 2 }
|
|
|
|
dayLightSavingEndWday OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
Sun(1),
|
|
Mon(2),
|
|
Tus(3),
|
|
Wed(4),
|
|
Thu(5),
|
|
Fri(6),
|
|
Sat(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dayLightSavingEndTime 3 }
|
|
|
|
dayLightSavingEndHour OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
"0:00"(0),
|
|
"1:00"(1),
|
|
"2:00"(2),
|
|
"3:00"(3),
|
|
"4:00"(4),
|
|
"5:00"(5),
|
|
"6:00"(6),
|
|
"7:00"(7),
|
|
"8:00"(8),
|
|
"9:00"(9),
|
|
"10:00"(10),
|
|
"11:00"(11),
|
|
"12:00"(12),
|
|
"13:00"(13),
|
|
"14:00"(14),
|
|
"15:00"(15),
|
|
"16:00"(16),
|
|
"17:00"(17),
|
|
"18:00"(18),
|
|
"19:00"(19),
|
|
"20:00"(20),
|
|
"21:00"(21),
|
|
"22:00"(22),
|
|
"23:00"(23),
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: 01:00,
|
|
2: 02:00
|
|
3: 03:00
|
|
4: 04:00
|
|
5: 05:00
|
|
6: 06:00
|
|
7: 07:00
|
|
8: 08:00
|
|
9: 09:00
|
|
10: 10:00
|
|
11: 11:00
|
|
12: 12:00
|
|
13: 13:00
|
|
14: 14:00
|
|
15: 15:00
|
|
16: 16:00
|
|
17: 17:00
|
|
18: 18:00
|
|
19: 19:00
|
|
20: 20:00
|
|
21: 21:00
|
|
22: 22:00
|
|
23: 23:00"
|
|
::= { dayLightSavingEndTime 4 }
|
|
|
|
--------------------
|
|
-- Access Control
|
|
--------------------
|
|
-- Secured Client Table
|
|
|
|
securedClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SecuredClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about secured clients."
|
|
::= { accessCtrl 2 }
|
|
|
|
securedClientEntry OBJECT-TYPE
|
|
SYNTAX SecuredClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of secured client entry."
|
|
INDEX { securedClientIndex }
|
|
::= { securedClientTable 1 }
|
|
|
|
SecuredClientEntry ::=
|
|
SEQUENCE {
|
|
securedClientIndex INTEGER,
|
|
securedClientStartIp IpAddress,
|
|
securedClientEndIp IpAddress,
|
|
securedClientService INTEGER,
|
|
securedClientEnable INTEGER
|
|
}
|
|
|
|
securedClientIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the entry."
|
|
::= { securedClientEntry 1 }
|
|
|
|
securedClientStartIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The starting IP address of the secured client set."
|
|
::= { securedClientEntry 2 }
|
|
|
|
securedClientEndIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ending IP address of the secured client set."
|
|
::= { securedClientEntry 3 }
|
|
|
|
securedClientService OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each bit corresponds to a service. The bit is set to 1 if the
|
|
service is enabled, and set to 0 if the service is disabled.
|
|
The various bit positions are:
|
|
BIT 1: telnet
|
|
BIT 2: ftp
|
|
BIT 3: web
|
|
BIT 4: icmp
|
|
BIT 5: not support
|
|
BIT 6: snmp."
|
|
::= { securedClientEntry 4 }
|
|
|
|
securedClientEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable the entry."
|
|
::= { securedClientEntry 5 }
|
|
|
|
|
|
--------------------
|
|
-- extAlarm
|
|
--------------------
|
|
|
|
extAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ExtAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains external alarm information."
|
|
::= { extAlarm 1 }
|
|
|
|
extAlarmEntry OBJECT-TYPE
|
|
SYNTAX ExtAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of external alarm table."
|
|
INDEX { extAlarmIndex }
|
|
::= { extAlarmTable 1 }
|
|
|
|
ExtAlarmEntry ::=
|
|
SEQUENCE {
|
|
extAlarmIndex INTEGER,
|
|
extAlarmName OCTET STRING,
|
|
extAlarmStatus OCTET STRING,
|
|
extAlarmTriggeredMode INTEGER
|
|
}
|
|
|
|
extAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the entry."
|
|
::= { extAlarmEntry 1 }
|
|
|
|
extAlarmName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The external alarm name."
|
|
::= { extAlarmEntry 2 }
|
|
|
|
extAlarmStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dispaly 'Normal' or 'Alarm' string"
|
|
::= { extAlarmEntry 3 }
|
|
|
|
extAlarmTriggeredMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
closeAlarm(1),
|
|
openAlarm(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The external alarm triggered mode."
|
|
::= { extAlarmEntry 4 }
|
|
|
|
--------------------
|
|
-- User Management
|
|
--------------------
|
|
|
|
userAuthMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
radius(2),
|
|
localThenRadius(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User authentication procsssing mode."
|
|
::= { user 1 }
|
|
|
|
userAuthServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the authentication server."
|
|
::= { user 2 }
|
|
|
|
userAuthServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port of the authentication server."
|
|
::= { user 3 }
|
|
|
|
userAuthServerSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secret between the authentication server and the NE for authentication process."
|
|
::= { user 4 }
|
|
|
|
-- userTable
|
|
|
|
userTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains user information."
|
|
::= { user 5 }
|
|
|
|
userEntry OBJECT-TYPE
|
|
SYNTAX UserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of userTable."
|
|
INDEX { userName }
|
|
::= { userTable 1 }
|
|
|
|
UserEntry ::=
|
|
SEQUENCE {
|
|
userName DisplayString,
|
|
userPassword DisplayString,
|
|
userPriviledge INTEGER,
|
|
userRowStatus RowStatus
|
|
}
|
|
|
|
userName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name."
|
|
::= { userEntry 1 }
|
|
|
|
userPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user password."
|
|
::= { userEntry 2 }
|
|
|
|
userPriviledge OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high(1),
|
|
middle(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user priviledge to decide what operation the user can and cannot do."
|
|
::= { userEntry 3 }
|
|
|
|
userRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status used to create or delete a user."
|
|
::= { userEntry 4 }
|
|
|
|
userAuthDefaultPriviledge OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high(1),
|
|
middle(2),
|
|
low(3),
|
|
deny(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user default priviledge to be assigned when radius authentication succeds
|
|
but no user priviledge information(radius service-type) is provided."
|
|
::= { user 6 }
|
|
|
|
--------------------
|
|
-- Upstream Broadcast
|
|
--------------------
|
|
|
|
usBcastCtrlEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable upstream broadcast control."
|
|
::= { usbCastCtrl 1 }
|
|
|
|
usBcastCtrlRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { usbCastCtrl 2 }
|
|
|
|
--------------------
|
|
-- Downstream QoS
|
|
--------------------
|
|
dsQosEnableMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
vlan(2),
|
|
dscp(3),
|
|
ippre(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode."
|
|
::= { dsQos 1 }
|
|
|
|
dsQosDefaultPri OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the internal default p.bit after overiding. All values not configured in the
|
|
overriding table are assigned to the default p.bit"
|
|
::= { dsQos 2 }
|
|
|
|
dsQoSOverridingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsQoSOverridingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes downstream QoS overriding information."
|
|
::= { dsQos 3 }
|
|
|
|
dsQoSOverridingEntry OBJECT-TYPE
|
|
SYNTAX DsQoSOverridingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in dsQoSOverridingTable."
|
|
INDEX { dsQosPriority }
|
|
::= { dsQoSOverridingTable 1 }
|
|
|
|
DsQoSOverridingEntry ::=
|
|
SEQUENCE {
|
|
dsQosPriority INTEGER,
|
|
dsQosValueList DisplayString
|
|
}
|
|
|
|
dsQosPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal P.bit after overriding."
|
|
::= { dsQoSOverridingEntry 1 }
|
|
|
|
dsQosValueList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured.
|
|
VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list example: <1>, <1,3>, <1,5,6~10>."
|
|
::= { dsQoSOverridingEntry 2 }
|
|
|
|
--------------------
|
|
-- fwUpgrade
|
|
--------------------
|
|
|
|
fwUpgradeVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the target firmware version that will be upgraded."
|
|
::= { fwUpgrade 1 }
|
|
|
|
fwUpgradeCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable firmware upgrade version checking feature."
|
|
::= { fwUpgrade 2 }
|
|
|
|
fwUpgradeStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display current firmware upgrade status."
|
|
::= { fwUpgrade 3 }
|
|
|
|
--------------------
|
|
-- delayedReboot
|
|
--------------------
|
|
delayedRebootTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "sec"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"5~1800 secs, 0: reboot immediately."
|
|
::= { delayedReboot 1 }
|
|
|
|
delayedRebootRemainingTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "sec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the remaining time of scheduled reboot."
|
|
::= { delayedReboot 2 }
|
|
|
|
delayedRebootCancel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cancel(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cancel the scheduled reboot."
|
|
::= { delayedReboot 3 }
|
|
|
|
----------------------------------------
|
|
-- statistics
|
|
----------------------------------------
|
|
|
|
dhcpStats OBJECT IDENTIFIER ::= { statistics 11 }
|
|
paepvcStats OBJECT IDENTIFIER ::= { statistics 12 }
|
|
macStats OBJECT IDENTIFIER ::= { statistics 13 }
|
|
-- ipbpvcStats OBJECT IDENTIFIER ::= { statistics 14 }
|
|
n1macStats OBJECT IDENTIFIER ::= { statistics 15 }
|
|
enetStats OBJECT IDENTIFIER ::= { statistics 16 }
|
|
vdslStats OBJECT IDENTIFIER ::= { statistics 17 }
|
|
macffStats OBJECT IDENTIFIER ::= { statistics 19 }
|
|
adslStats OBJECT IDENTIFIER ::= { statistics 20 }
|
|
|
|
--------------------
|
|
-- IGMP
|
|
--------------------
|
|
|
|
igmpQueryCntTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP query messages received."
|
|
::= { statistics 1 }
|
|
|
|
igmpReportCntTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP report messages received."
|
|
::= { statistics 2 }
|
|
|
|
igmpLeaveCntTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP leave messages received."
|
|
::= { statistics 3 }
|
|
|
|
igmpNumOfActiveGroups OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP learned groups."
|
|
::= { statistics 4 }
|
|
|
|
-- igmpGroupTable
|
|
|
|
igmpGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes igmp group information."
|
|
::= { statistics 5 }
|
|
|
|
igmpGroupEntry OBJECT-TYPE
|
|
SYNTAX IgmpGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in igmpGroupTable."
|
|
INDEX { igmpGroupIp }
|
|
::= { igmpGroupTable 1 }
|
|
|
|
IgmpGroupEntry ::=
|
|
SEQUENCE {
|
|
igmpGroupIp IpAddress,
|
|
igmpGroupvid INTEGER,
|
|
igmpGroupnumberOfMembers INTEGER,
|
|
igmpGroupMemberPorts PortList
|
|
|
|
}
|
|
|
|
igmpGroupIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"igmp group IP"
|
|
::= { igmpGroupEntry 1 }
|
|
|
|
igmpGroupvid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"vlan id"
|
|
::= { igmpGroupEntry 2 }
|
|
|
|
igmpGroupnumberOfMembers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"number Of Members"
|
|
|
|
::= { igmpGroupEntry 3 }
|
|
|
|
igmpGroupMemberPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Member Ports"
|
|
|
|
::= { igmpGroupEntry 4 }
|
|
|
|
-- igmpGroupPortTable
|
|
|
|
igmpGroupPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpGroupPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes igmp Group port information."
|
|
::= { statistics 6 }
|
|
|
|
igmpGroupPortEntry OBJECT-TYPE
|
|
SYNTAX IgmpGroupPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in igmpGroupPortTable."
|
|
INDEX { ifIndex , igmpGroupPortIp , igmpGroupPortvid}
|
|
::= { igmpGroupPortTable 1 }
|
|
|
|
IgmpGroupPortEntry ::=
|
|
SEQUENCE {
|
|
igmpGroupPortIp IpAddress,
|
|
igmpGroupPortvid INTEGER
|
|
}
|
|
|
|
igmpGroupPortIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Igmp Group IP"
|
|
::= { igmpGroupPortEntry 1 }
|
|
|
|
igmpGroupPortvid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Igmp Group vid"
|
|
::= { igmpGroupPortEntry 2 }
|
|
|
|
-- igmpGroupV2Table
|
|
|
|
igmpGroupV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpGroupV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that displays IGMP learned group member information."
|
|
::= { statistics 7 }
|
|
|
|
igmpGroupV2Entry OBJECT-TYPE
|
|
SYNTAX IgmpGroupV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of igmpGroupV2Table."
|
|
INDEX { igmpGroupV2Vid, igmpGroupV2Ip }
|
|
::= { igmpGroupV2Table 1 }
|
|
|
|
IgmpGroupV2Entry ::=
|
|
SEQUENCE {
|
|
igmpGroupV2Vid VlanIndex,
|
|
igmpGroupV2Ip IpAddress,
|
|
igmpGroupV2NumOfMembers INTEGER,
|
|
igmpGroupV2MemberPorts PortList
|
|
}
|
|
|
|
igmpGroupV2Vid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP group VLAN ID."
|
|
::= { igmpGroupV2Entry 1 }
|
|
|
|
igmpGroupV2Ip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast IP address."
|
|
::= { igmpGroupV2Entry 2 }
|
|
|
|
igmpGroupV2NumOfMembers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of member ports in the group."
|
|
::= { igmpGroupV2Entry 3 }
|
|
|
|
igmpGroupV2MemberPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The member port list of the group."
|
|
::= { igmpGroupV2Entry 4 }
|
|
|
|
-- igmpGroupPortV2Table
|
|
|
|
igmpGroupPortV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpGroupPortV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that displays IGMP joined groups in this port."
|
|
::= { statistics 8 }
|
|
|
|
igmpGroupPortV2Entry OBJECT-TYPE
|
|
SYNTAX IgmpGroupPortV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of igmpGroupPortV2Table."
|
|
INDEX { ifIndex, igmpGroupPortV2Vid, igmpGroupPortV2Ip, igmpGroupPortV2SourceIp }
|
|
::= { igmpGroupPortV2Table 1 }
|
|
|
|
IgmpGroupPortV2Entry ::=
|
|
SEQUENCE {
|
|
igmpGroupPortV2Vid VlanIndex,
|
|
igmpGroupPortV2Ip IpAddress,
|
|
igmpGroupPortV2SourceIp IpAddress
|
|
}
|
|
|
|
igmpGroupPortV2Vid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP group VLAN ID."
|
|
::= { igmpGroupPortV2Entry 1 }
|
|
|
|
igmpGroupPortV2Ip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast IP address."
|
|
::= { igmpGroupPortV2Entry 2 }
|
|
|
|
igmpGroupPortV2SourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address that joins the IGMP group."
|
|
::= { igmpGroupPortV2Entry 3 }
|
|
|
|
-- igmpPortCtrlPduTable
|
|
|
|
igmpPortCtrlPduTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpPortCtrlPduEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that displays IGMP related counter values in this port."
|
|
::= { statistics 9 }
|
|
|
|
igmpPortCtrlPduEntry OBJECT-TYPE
|
|
SYNTAX IgmpPortCtrlPduEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of igmpPortCtrlPduTable."
|
|
INDEX { ifIndex }
|
|
::= { igmpPortCtrlPduTable 1 }
|
|
|
|
IgmpPortCtrlPduEntry ::=
|
|
SEQUENCE {
|
|
igmpPortCtrlPduQueryCnt Counter32,
|
|
igmpPortCtrlPduReportCnt Counter32,
|
|
igmpPortCtrlPduLeaveCnt Counter32,
|
|
igmpPortNumOfActiveGroups INTEGER,
|
|
igmpPortCtrlAuditLeaveCnt Counter32
|
|
}
|
|
|
|
igmpPortCtrlPduQueryCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP query messages received in this port."
|
|
::= { igmpPortCtrlPduEntry 1 }
|
|
|
|
igmpPortCtrlPduReportCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP report messages received in this port."
|
|
::= { igmpPortCtrlPduEntry 2 }
|
|
|
|
igmpPortCtrlPduLeaveCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IGMP leave messages received in this port."
|
|
::= { igmpPortCtrlPduEntry 3 }
|
|
|
|
igmpPortNumOfActiveGroups OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of active IGMP groups in this port."
|
|
::= { igmpPortCtrlPduEntry 4 }
|
|
|
|
igmpPortCtrlAuditLeaveCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of groups left by audit query."
|
|
::= { igmpPortCtrlPduEntry 5 }
|
|
|
|
--------------------
|
|
-- vdslStats
|
|
--------------------
|
|
-- vdslLineStatsTable
|
|
|
|
vdslLineStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table displays VDSL line statistics."
|
|
::= { vdslStats 2 }
|
|
|
|
vdslLineStatsEntry OBJECT-TYPE
|
|
SYNTAX VdslLineStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of vdslLineStatsTable."
|
|
INDEX { ifIndex }
|
|
::= { vdslLineStatsTable 1 }
|
|
|
|
VdslLineStatsEntry ::=
|
|
SEQUENCE {
|
|
vdslLineStatsVtucBits1 OCTET STRING,
|
|
vdslLineStatsVtucBits2 OCTET STRING,
|
|
vdslLineStatsVtucBits3 OCTET STRING,
|
|
vdslLineStatsVtucBits4 OCTET STRING,
|
|
vdslLineStatsVturBits1 OCTET STRING,
|
|
vdslLineStatsVturBits2 OCTET STRING,
|
|
vdslLineStatsVturBits3 OCTET STRING,
|
|
vdslLineStatsVturBits4 OCTET STRING,
|
|
vdslLineStatsVtucGain1 OCTET STRING,
|
|
vdslLineStatsVtucGain2 OCTET STRING,
|
|
vdslLineStatsVtucGain3 OCTET STRING,
|
|
vdslLineStatsVtucGain4 OCTET STRING,
|
|
vdslLineStatsVtucGain5 OCTET STRING,
|
|
vdslLineStatsVtucGain6 OCTET STRING,
|
|
vdslLineStatsVtucGain7 OCTET STRING,
|
|
vdslLineStatsVtucGain8 OCTET STRING,
|
|
vdslLineStatsVturGain1 OCTET STRING,
|
|
vdslLineStatsVturGain2 OCTET STRING,
|
|
vdslLineStatsVturGain3 OCTET STRING,
|
|
vdslLineStatsVturGain4 OCTET STRING,
|
|
vdslLineStatsVturGain5 OCTET STRING,
|
|
vdslLineStatsVturGain6 OCTET STRING,
|
|
vdslLineStatsVturGain7 OCTET STRING,
|
|
vdslLineStatsVturGain8 OCTET STRING,
|
|
vdslLineStatsVtucHlog OCTET STRING,
|
|
vdslLineStatsVturHlog OCTET STRING,
|
|
vdslLineStatsVtucQln OCTET STRING,
|
|
vdslLineStatsVturQln OCTET STRING,
|
|
vdslLineStatsVtucSnr OCTET STRING,
|
|
vdslLineStatsVturSnr OCTET STRING,
|
|
vdslLineStatsVtucTssi OCTET STRING,
|
|
vdslLineStatsVturTssi OCTET STRING,
|
|
vdslLineStatsProtocol INTEGER
|
|
}
|
|
|
|
vdslLineStatsVtucBits1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-C 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 1 }
|
|
|
|
vdslLineStatsVtucBits2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-C 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 2 }
|
|
|
|
vdslLineStatsVtucBits3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-C 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 3 }
|
|
|
|
vdslLineStatsVtucBits4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-C 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 4 }
|
|
|
|
vdslLineStatsVturBits1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-R 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 5 }
|
|
|
|
vdslLineStatsVturBits2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-R 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 6 }
|
|
|
|
vdslLineStatsVturBits3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-R 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 7 }
|
|
|
|
vdslLineStatsVturBits4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Bits for the VTU-R 1024 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 15."
|
|
::= { vdslLineStatsEntry 8 }
|
|
|
|
vdslLineStatsVtucGain1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 9 }
|
|
|
|
vdslLineStatsVtucGain2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 10 }
|
|
|
|
vdslLineStatsVtucGain3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 11 }
|
|
|
|
vdslLineStatsVtucGain4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 12 }
|
|
|
|
vdslLineStatsVtucGain5 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 13 }
|
|
|
|
vdslLineStatsVtucGain6 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 14 }
|
|
|
|
vdslLineStatsVtucGain7 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 15 }
|
|
|
|
vdslLineStatsVtucGain8 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 16 }
|
|
|
|
vdslLineStatsVturGain1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 17 }
|
|
|
|
vdslLineStatsVturGain2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 18 }
|
|
|
|
vdslLineStatsVturGain3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 19 }
|
|
|
|
vdslLineStatsVturGain4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 20 }
|
|
|
|
vdslLineStatsVturGain5 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 21 }
|
|
|
|
vdslLineStatsVturGain6 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 22 }
|
|
|
|
vdslLineStatsVturGain7 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 23 }
|
|
|
|
vdslLineStatsVturGain8 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Gain for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
|
|
The gain value is represented as a multiple of 1/512 on linear scale."
|
|
::= { vdslLineStatsEntry 24 }
|
|
|
|
vdslLineStatsVtucHlog OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Hlog for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022.
|
|
A special value m=1023 indicates that no measurement could be done for the
|
|
sub-carrier group becauseit is out of the passband or that the attenuation
|
|
is out of range to be represented. Each value in this array is 16 bits wide."
|
|
::= { vdslLineStatsEntry 25 }
|
|
|
|
vdslLineStatsVturHlog OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Hlog for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022.
|
|
A special value m=1023 indicates that no measurement could be done for the
|
|
sub-carrier group because it is out of the passband or that the attenuation
|
|
is out ofrange to be represented. Each value in this array is 16 bits wide."
|
|
::= { vdslLineStatsEntry 26 }
|
|
|
|
vdslLineStatsVtucQln OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Qln for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254.
|
|
A special value n(i)=255 indicates that no measurement could be done for the
|
|
sub-carrier group. Each value in this array is 8 bits wide."
|
|
::= { vdslLineStatsEntry 27 }
|
|
|
|
vdslLineStatsVturQln OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Qln for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254.
|
|
A special value n(i)=255 indicates that no measurement could be done for the
|
|
sub-carrier group. Each value in this array is 8 bits wide."
|
|
::= { vdslLineStatsEntry 28 }
|
|
|
|
vdslLineStatsVtucSnr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Snr for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVtucSnr (i)/2) in dB
|
|
(i.e., -32 to 95dB). Each value in this array is 8 bits wide."
|
|
::= { vdslLineStatsEntry 29 }
|
|
|
|
vdslLineStatsVturSnr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Snr for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVturSnr (i)/2) in dB
|
|
(i.e., -32 to 95dB). Each value in this array is 8 bits wide."
|
|
::= { vdslLineStatsEntry 30 }
|
|
|
|
vdslLineStatsVtucTssi OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Tssi for the VTU-C 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
Each value in this array is 16 bits wide.
|
|
The tssi value is represented as a multiple of 1/32768 on linear scale."
|
|
::= { vdslLineStatsEntry 31 }
|
|
|
|
vdslLineStatsVturTssi OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object provides Tssi for the VTU-R 512 subcarriers.
|
|
Each subcarrier takes two octets to store the value.
|
|
Each value in this array is 16 bits wide.
|
|
The tssi value is represented as a multiple of 1/32768 on linear scale."
|
|
::= { vdslLineStatsEntry 32 }
|
|
|
|
vdslLineStatsProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
vdsl8a(2),
|
|
vdsl8b(3),
|
|
vdsl8c(4),
|
|
vdsl8d(5),
|
|
vdsl12a(6),
|
|
vdsl12b(7),
|
|
vdsl17a(8),
|
|
gdmt(9),
|
|
glite(10),
|
|
adsl2(11),
|
|
adsl2plus(12),
|
|
t1413(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual line protocol."
|
|
::= { vdslLineStatsEntry 33 }
|
|
|
|
--------------------
|
|
-- DHCP
|
|
--------------------
|
|
|
|
-- dhcpSnoopIpTable
|
|
|
|
dhcpSnoopIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpSnoopIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the IP addresses and netmasks offered by the DHCP server."
|
|
::= { dhcpStats 1 }
|
|
|
|
dhcpSnoopIpEntry OBJECT-TYPE
|
|
SYNTAX DhcpSnoopIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dhcpSnoopIpTable."
|
|
INDEX { ifIndex, dhcpSnoopIp }
|
|
::= { dhcpSnoopIpTable 1 }
|
|
|
|
DhcpSnoopIpEntry ::=
|
|
SEQUENCE {
|
|
dhcpSnoopIp IpAddress,
|
|
dhcpSnoopMac PhysAddress,
|
|
dhcpSnoopVid VlanIndex,
|
|
dhcpSnoopMask INTEGER,
|
|
dhcpSnoopGateway IpAddress,
|
|
dhcpSnoopRouteMap OCTET STRING
|
|
}
|
|
|
|
dhcpSnoopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snooped IP address."
|
|
::= { dhcpSnoopIpEntry 1 }
|
|
|
|
dhcpSnoopMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snooped MAC address."
|
|
::= { dhcpSnoopIpEntry 2 }
|
|
|
|
dhcpSnoopVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snooped VLAN ID."
|
|
::= { dhcpSnoopIpEntry 3 }
|
|
|
|
dhcpSnoopMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snooped IP mask"
|
|
::= { dhcpSnoopIpEntry 4 }
|
|
|
|
dhcpSnoopGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snooped Gateway."
|
|
::= { dhcpSnoopIpEntry 5 }
|
|
|
|
dhcpSnoopRouteMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The refrence bit map of the dhcp route"
|
|
::= { dhcpSnoopIpEntry 6 }
|
|
|
|
-- dhcpSnoopCounterTable
|
|
|
|
dhcpSnoopCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpSnoopCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the DHCP statistics."
|
|
::= { dhcpStats 2 }
|
|
|
|
dhcpSnoopCounterEntry OBJECT-TYPE
|
|
SYNTAX DhcpSnoopCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dhcpSnoopCounterTable."
|
|
INDEX { ifIndex }
|
|
::= { dhcpSnoopCounterTable 1 }
|
|
|
|
DhcpSnoopCounterEntry ::=
|
|
SEQUENCE {
|
|
dhcpDiscovery Counter64,
|
|
dhcpOffer Counter64,
|
|
dhcpRequest Counter64,
|
|
dhcpAck Counter64,
|
|
dhcpAckBySnoopFull Counter64
|
|
}
|
|
|
|
dhcpDiscovery OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of received DHCP server discovery packets."
|
|
::= { dhcpSnoopCounterEntry 1 }
|
|
|
|
dhcpOffer OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of received DHCP server offer packets."
|
|
::= { dhcpSnoopCounterEntry 2 }
|
|
|
|
dhcpRequest OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of received DHCP IP request packets."
|
|
::= { dhcpSnoopCounterEntry 3 }
|
|
|
|
dhcpAck OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of received DHCP IP acknowledge packets."
|
|
::= { dhcpSnoopCounterEntry 4 }
|
|
|
|
dhcpAckBySnoopFull OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of received DHCP IP acknowledge packets that replace the oldest snooping
|
|
entry in snooping table due to table full."
|
|
::= { dhcpSnoopCounterEntry 5 }
|
|
|
|
dhcpRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains dhcp route information."
|
|
::= { dhcpStats 3 }
|
|
|
|
dhcpRouteEntry OBJECT-TYPE
|
|
SYNTAX DhcpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of dhcpRouteTable."
|
|
INDEX { dhcpRouteIndex }
|
|
::= { dhcpRouteTable 1 }
|
|
|
|
DhcpRouteEntry ::=
|
|
SEQUENCE {
|
|
dhcpRouteIndex INTEGER,
|
|
dhcpRouteVid VlanIndex,
|
|
dhcpRouteIP IpAddress,
|
|
dhcpRouteMask INTEGER,
|
|
dhcpRouteGwIP IpAddress
|
|
}
|
|
|
|
dhcpRouteIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..24)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { dhcpRouteEntry 1 }
|
|
|
|
dhcpRouteVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID refering to this dhcp route."
|
|
::= { dhcpRouteEntry 2 }
|
|
|
|
|
|
dhcpRouteIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of this dhcp route"
|
|
::= { dhcpRouteEntry 3 }
|
|
|
|
dhcpRouteMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of source IP mask."
|
|
::= { dhcpRouteEntry 4 }
|
|
|
|
dhcpRouteGwIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway IP address."
|
|
::= { dhcpRouteEntry 5 }
|
|
|
|
--------------------
|
|
-- PAE PVC
|
|
--------------------
|
|
|
|
-- paepvcSessionTable
|
|
|
|
paepvcSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PaepvcSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the paepvc session statistics."
|
|
::= { paepvcStats 1 }
|
|
|
|
paepvcSessionEntry OBJECT-TYPE
|
|
SYNTAX PaepvcSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of paepvcSessionTable."
|
|
INDEX { ifIndex , paepvcSessionVpi, paepvcSessionVci }
|
|
::= { paepvcSessionTable 1 }
|
|
|
|
PaepvcSessionEntry ::=
|
|
SEQUENCE {
|
|
paepvcSessionVpi INTEGER,
|
|
paepvcSessionVci INTEGER,
|
|
paepvcSessionState INTEGER,
|
|
paepvcSessionId INTEGER,
|
|
paepvcSessionUptime Unsigned32,
|
|
paepvcSessionacname DisplayString,
|
|
paepvcSessionsrvcname DisplayString
|
|
}
|
|
|
|
paepvcSessionVpi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC VPI."
|
|
::= { paepvcSessionEntry 1 }
|
|
|
|
paepvcSessionVci OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC VCI."
|
|
::= { paepvcSessionEntry 2 }
|
|
|
|
paepvcSessionState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
pppoe(2),
|
|
ppp(3),
|
|
up(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC status."
|
|
::= { paepvcSessionEntry 3 }
|
|
|
|
paepvcSessionId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC session ID."
|
|
::= { paepvcSessionEntry 4 }
|
|
|
|
paepvcSessionUptime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC session uptime."
|
|
::= { paepvcSessionEntry 5 }
|
|
|
|
paepvcSessionacname OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access concentrator name."
|
|
::= { paepvcSessionEntry 6 }
|
|
|
|
paepvcSessionsrvcname OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service name."
|
|
::= { paepvcSessionEntry 7 }
|
|
|
|
-- paepvcCountTable
|
|
|
|
paepvcCountTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PaepvcCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the paepvc counters."
|
|
::= { paepvcStats 2 }
|
|
|
|
paepvcCountEntry OBJECT-TYPE
|
|
SYNTAX PaepvcCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of paepvcCountTable."
|
|
INDEX { ifIndex , paepvcCountVpi, paepvcCountVci }
|
|
::= { paepvcCountTable 1 }
|
|
|
|
PaepvcCountEntry ::=
|
|
SEQUENCE {
|
|
paepvcCountVpi INTEGER,
|
|
paepvcCountVci INTEGER,
|
|
paepvcCountPppLcpCfgReqRx Unsigned32,
|
|
paepvcCountPppLcpEchoReqRx Unsigned32,
|
|
paepvcCountPppLcpEchoReplyRx Unsigned32,
|
|
paepvcCountPadiTx Unsigned32,
|
|
paepvcCountPadoRx Unsigned32,
|
|
paepvcCountPadrTx Unsigned32,
|
|
paepvcCountPadsRx Unsigned32,
|
|
paepvcCountPadtTx Unsigned32,
|
|
paepvcCountPadtRx Unsigned32,
|
|
paepvcCountSrvcnameErrRx Unsigned32,
|
|
paepvcCountAcSystemErrRx Unsigned32,
|
|
paepvcCountGenericErrTx Unsigned32,
|
|
paepvcCountGenericErrRx Unsigned32
|
|
}
|
|
|
|
|
|
paepvcCountVpi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC VPI."
|
|
::= { paepvcCountEntry 1 }
|
|
|
|
paepvcCountVci OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PAEPVC VCI."
|
|
::= { paepvcCountEntry 2 }
|
|
|
|
paepvcCountPppLcpCfgReqRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ppp lcp config-request received."
|
|
::= { paepvcCountEntry 3 }
|
|
|
|
paepvcCountPppLcpEchoReqRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ppp lcp echo-request received."
|
|
::= { paepvcCountEntry 4 }
|
|
|
|
paepvcCountPppLcpEchoReplyRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ppp lcp echo-reply received."
|
|
::= { paepvcCountEntry 5 }
|
|
|
|
paepvcCountPadiTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe padi transfered"
|
|
::= { paepvcCountEntry 6 }
|
|
|
|
paepvcCountPadoRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe pado received"
|
|
::= { paepvcCountEntry 7 }
|
|
|
|
paepvcCountPadrTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe padr transfered"
|
|
::= { paepvcCountEntry 8 }
|
|
|
|
paepvcCountPadsRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe pads received"
|
|
::= { paepvcCountEntry 9 }
|
|
|
|
paepvcCountPadtTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe padt transfered"
|
|
::= { paepvcCountEntry 10 }
|
|
|
|
paepvcCountPadtRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe padt received"
|
|
::= { paepvcCountEntry 11 }
|
|
|
|
paepvcCountSrvcnameErrRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe service name error received"
|
|
::= { paepvcCountEntry 12 }
|
|
|
|
paepvcCountAcSystemErrRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe access concentrator name error received"
|
|
::= { paepvcCountEntry 13 }
|
|
|
|
paepvcCountGenericErrTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe generic error transfered"
|
|
::= { paepvcCountEntry 14 }
|
|
|
|
paepvcCountGenericErrRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pppoe generic error received"
|
|
::= { paepvcCountEntry 15 }
|
|
|
|
--------------------
|
|
-- MAC
|
|
--------------------
|
|
|
|
macDisplayTarget OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This managed object is a filter used for identify the target from which
|
|
the MAC addresses are learned in macTable. The target could be:
|
|
99: all ports in the system
|
|
98: all subscriber ports
|
|
97: all Ethernet ports
|
|
|
|
IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50)."
|
|
::= { macStats 1 }
|
|
|
|
-- macTable
|
|
|
|
macTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about unicast
|
|
entries for which the bridge has forwarding and/or
|
|
filtering information. This information is used
|
|
by the transparent bridging function in
|
|
determining how to propagate a received frame."
|
|
::= { macStats 2 }
|
|
|
|
macEntry OBJECT-TYPE
|
|
SYNTAX MacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macTable."
|
|
INDEX { dot1qVlanIndex, macAddress }
|
|
::= { macTable 1 }
|
|
|
|
MacEntry ::=
|
|
SEQUENCE {
|
|
macAddress MacAddress,
|
|
macPort INTEGER,
|
|
macStatus INTEGER,
|
|
macVid VlanIndex
|
|
}
|
|
|
|
macAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has
|
|
forwarding and/or filtering information."
|
|
::= { macEntry 1 }
|
|
|
|
macPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port from which the mac address has been learned."
|
|
::= { macEntry 2 }
|
|
|
|
macStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry."
|
|
::= { macEntry 3 }
|
|
|
|
macVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan id of this entry."
|
|
::= { macEntry 4 }
|
|
--------------------
|
|
-- ipbpvc
|
|
--------------------
|
|
|
|
-- arpproxyTable
|
|
|
|
-- arpproxyTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF ArpproxyEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Display ARP table. This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvcStats 1 }
|
|
--
|
|
-- arpproxyEntry OBJECT-TYPE
|
|
-- SYNTAX ArpproxyEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of arpproxyTable."
|
|
-- INDEX { ipbpvcDomainName, arpproxyIp }
|
|
-- ::= { arpproxyTable 1 }
|
|
--
|
|
-- ArpproxyEntry ::=
|
|
-- SEQUENCE {
|
|
-- arpproxyIp IpAddress,
|
|
-- arpproxyMac MacAddress,
|
|
-- arpproxyIfIndex INTEGER,
|
|
-- arpproxyVpi INTEGER,
|
|
-- arpproxyVci INTEGER,
|
|
-- arpproxyInterfaceIp IpAddress,
|
|
-- arpproxyInterfaceMask INTEGER,
|
|
-- arpproxyInterfaceVid VlanIndex,
|
|
-- arpproxyDhcpIp INTEGER,
|
|
-- arpproxyType INTEGER
|
|
-- }
|
|
--
|
|
-- arpproxyIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 1 }
|
|
--
|
|
-- arpproxyMac OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 2 }
|
|
--
|
|
-- arpproxyIfIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 3 }
|
|
--
|
|
-- arpproxyVpi OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 4 }
|
|
--
|
|
-- arpproxyVci OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 5 }
|
|
--
|
|
-- arpproxyInterfaceIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 6 }
|
|
--
|
|
-- arpproxyInterfaceMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 7 }
|
|
--
|
|
-- arpproxyInterfaceVid OBJECT-TYPE
|
|
-- SYNTAX VlanIndex
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 8 }
|
|
--
|
|
-- arpproxyDhcpIp OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- true(1),
|
|
-- false(2)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 9 }
|
|
--
|
|
-- arpproxyType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- upstream(1),
|
|
-- downstream(2)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { arpproxyEntry 10 }
|
|
--
|
|
-- ipbpvcIfDynamicTable
|
|
--
|
|
-- ipbpvcIfDynamicTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcIfDynamicEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Display runtime interfaces. This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvcStats 2 }
|
|
--
|
|
-- ipbpvcIfDynamicEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcIfDynamicEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcIfDynamicTable."
|
|
-- INDEX { ipbpvcDomainName, ipbpvcIfDynamicIp, ipbpvcIfDynamicMask, ipbpvcDomainVlanId }
|
|
-- ::= { ipbpvcIfDynamicTable 1 }
|
|
--
|
|
-- IpbpvcIfDynamicEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcIfDynamicIp IpAddress,
|
|
-- ipbpvcIfDynamicMask INTEGER,
|
|
-- ipbpvcIfDynamicIfIndex INTEGER,
|
|
-- ipbpvcIfDynamicVpi INTEGER,
|
|
-- ipbpvcIfDynamicVci INTEGER
|
|
-- }
|
|
--
|
|
-- ipbpvcIfDynamicIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcIfDynamicEntry 1 }
|
|
--
|
|
-- ipbpvcIfDynamicMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcIfDynamicEntry 2 }
|
|
--
|
|
-- ipbpvcIfDynamicIfIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcIfDynamicEntry 3 }
|
|
--
|
|
-- ipbpvcIfDynamicVpi OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcIfDynamicEntry 4 }
|
|
--
|
|
-- ipbpvcIfDynamicVci OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcIfDynamicEntry 5 }
|
|
--
|
|
-- ipbpvcRouteDynamicTable
|
|
--
|
|
-- ipbpvcRouteDynamicTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IpbpvcRouteDynamicEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Display runtime routing table. This table is supported by R3.00 and later versions."
|
|
-- ::= { ipbpvcStats 3 }
|
|
--
|
|
-- ipbpvcRouteDynamicEntry OBJECT-TYPE
|
|
-- SYNTAX IpbpvcRouteDynamicEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry of ipbpvcRouteDynamicTable."
|
|
-- INDEX { ipbpvcDomainName, ipbpvcRouteDynamicType, ipbpvcRouteDynamicIp, ipbpvcRouteDynamicMask }
|
|
-- ::= { ipbpvcRouteDynamicTable 1 }
|
|
--
|
|
-- IpbpvcRouteDynamicEntry ::=
|
|
-- SEQUENCE {
|
|
-- ipbpvcRouteDynamicType INTEGER,
|
|
-- ipbpvcRouteDynamicIp IpAddress,
|
|
-- ipbpvcRouteDynamicMask INTEGER,
|
|
-- ipbpvcRouteDynamicNextHop IpAddress,
|
|
-- ipbpvcRouteDynamicMetric INTEGER,
|
|
-- ipbpvcRouteDynamicPriority INTEGER
|
|
-- }
|
|
--
|
|
-- ipbpvcRouteDynamicType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- upstream(1),
|
|
-- downstream(2)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcRouteDynamicEntry 1 }
|
|
--
|
|
-- ipbpvcRouteDynamicIp OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcRouteDynamicEntry 2 }
|
|
--
|
|
-- ipbpvcRouteDynamicMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcRouteDynamicEntry 3 }
|
|
--
|
|
-- ipbpvcRouteDynamicNextHop OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcRouteDynamicEntry 4 }
|
|
--
|
|
-- ipbpvcRouteDynamicMetric OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcRouteDynamicEntry 5 }
|
|
--
|
|
-- ipbpvcRouteDynamicPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ipbpvcRouteDynamicEntry 6 }
|
|
|
|
|
|
------------------------------
|
|
-- n1macStats
|
|
------------------------------
|
|
|
|
n1macTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF N1macEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about N to 1
|
|
MAC translation, including connection type,
|
|
session id/IP and MAC address."
|
|
::= { n1macStats 1 }
|
|
|
|
n1macEntry OBJECT-TYPE
|
|
SYNTAX N1macEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of n1macTable."
|
|
INDEX { ifIndex, n1macProtoVal}
|
|
::= { n1macTable 1 }
|
|
|
|
N1macEntry ::=
|
|
SEQUENCE {
|
|
n1macProtoVal Unsigned32,
|
|
n1macProtoType INTEGER,
|
|
n1macMacAddr MacAddress
|
|
}
|
|
|
|
n1macProtoVal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol value of specified connection. If the connection
|
|
is pppoe/pppoaoe, the value stands for session id; if the
|
|
connection is ipoe/ipoaoe, the value means IP address."
|
|
::= { n1macEntry 1 }
|
|
|
|
n1macProtoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
ipoe(2),
|
|
ipoaoe(3),
|
|
pppoe(4),
|
|
pppoaoe(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol type of the connection which the MAC is translated."
|
|
::= { n1macEntry 2 }
|
|
|
|
n1macMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The translated MAC address."
|
|
::= { n1macEntry 3 }
|
|
|
|
------------------------------
|
|
-- enetStats
|
|
------------------------------
|
|
enetPrimaryPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled."
|
|
::= { enetStats 1 }
|
|
|
|
enetSfpInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EnetSfpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes sfp info of enet port."
|
|
::= { enetStats 2 }
|
|
|
|
enetSfpInfoEntry OBJECT-TYPE
|
|
SYNTAX EnetSfpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in enetSfpInfoTable."
|
|
INDEX {ifIndex}
|
|
::= { enetSfpInfoTable 1 }
|
|
|
|
EnetSfpInfoEntry ::=
|
|
SEQUENCE {
|
|
enetSfpInfoTxpower INTEGER,
|
|
enetSfpInfoRxpower INTEGER,
|
|
enetSfpInfoTemperature INTEGER,
|
|
enetSfpInfoTxBias INTEGER,
|
|
enetSfpInfoVoltage INTEGER
|
|
}
|
|
|
|
enetSfpInfoTxpower OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
UNITS "10^-4 mW"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Tx Output Power."
|
|
::= { enetSfpInfoEntry 1 }
|
|
|
|
enetSfpInfoRxpower OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
UNITS "10^-4 C"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Rx Output Power."
|
|
::= { enetSfpInfoEntry 2 }
|
|
|
|
enetSfpInfoTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (-1280000..1280000)
|
|
UNITS "10^-4 C"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured temperature."
|
|
::= { enetSfpInfoEntry 3 }
|
|
|
|
enetSfpInfoTxBias OBJECT-TYPE
|
|
SYNTAX INTEGER (0..131000)
|
|
UNITS "10^-3 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured tx bias."
|
|
::= { enetSfpInfoEntry 4 }
|
|
|
|
enetSfpInfoVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65000)
|
|
UNITS "0.1mV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured voltage."
|
|
::= { enetSfpInfoEntry 5 }
|
|
|
|
----------------------------------------
|
|
-- macFfStats
|
|
----------------------------------------
|
|
macFfStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MAC Force Forwarding static configuration and dynamic information."
|
|
::= { macffStats 1 }
|
|
|
|
macFfStatsEntry OBJECT-TYPE
|
|
SYNTAX MacFfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfStatsTable."
|
|
INDEX { macFfStatsIndex }
|
|
::= { macFfStatsTable 1 }
|
|
|
|
MacFfStatsEntry ::=
|
|
SEQUENCE {
|
|
macFfStatsIndex INTEGER,
|
|
macFfStatsVid VlanIndex,
|
|
macFfStatsArIP IpAddress,
|
|
macFfStatsSrcIP IpAddress,
|
|
macFfStatsSrcMask INTEGER
|
|
}
|
|
|
|
macFfStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the MACFF."
|
|
::= { macFfStatsEntry 1 }
|
|
|
|
macFfStatsVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID refering to this AR/AS."
|
|
::= { macFfStatsEntry 2 }
|
|
|
|
|
|
macFfStatsArIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of this AR/AS"
|
|
::= { macFfStatsEntry 3 }
|
|
|
|
macFfStatsSrcIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of the MACFF."
|
|
::= { macFfStatsEntry 4 }
|
|
|
|
macFfStatsSrcMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of source IP mask."
|
|
::= { macFfStatsEntry 5 }
|
|
|
|
macFfArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MAC Force Forwarding ARP information."
|
|
::= { macffStats 2 }
|
|
|
|
macFfArpEntry OBJECT-TYPE
|
|
SYNTAX MacFfArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfArpTable."
|
|
INDEX { macFfArpVid, macFfArpIP}
|
|
::= { macFfArpTable 1 }
|
|
|
|
MacFfArpEntry ::=
|
|
SEQUENCE {
|
|
macFfArpVid VlanIndex,
|
|
macFfArpIP IpAddress,
|
|
macFfArpPort INTEGER,
|
|
macFfArpMac PhysAddress
|
|
}
|
|
|
|
macFfArpVid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID refering to this AR/AS."
|
|
::= { macFfArpEntry 1 }
|
|
|
|
macFfArpIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of this AR/AS."
|
|
::= { macFfArpEntry 2 }
|
|
|
|
|
|
macFfArpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of this AR/AS."
|
|
::= { macFfArpEntry 3 }
|
|
|
|
macFfArpMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the AR or AS."
|
|
::= { macFfArpEntry 4 }
|
|
|
|
macFfArpCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MacFfArpCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MAC Force Forwarding ARP counter information."
|
|
::= { macffStats 3 }
|
|
|
|
macFfArpCounterEntry OBJECT-TYPE
|
|
SYNTAX MacFfArpCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of macFfArpCounterTable."
|
|
INDEX { ifIndex }
|
|
::= { macFfArpCounterTable 1 }
|
|
|
|
MacFfArpCounterEntry ::=
|
|
SEQUENCE {
|
|
macFfArpCounterRequestTX Counter32,
|
|
macFfArpCounterRequestRX Counter32,
|
|
macFfArpCounterRequestRXDrop Counter32,
|
|
macFfArpCounterReplyTX Counter32,
|
|
macFfArpCounterReplyRX Counter32,
|
|
macFfArpCounterReplyRXDrop Counter32
|
|
}
|
|
|
|
macFfArpCounterRequestTX OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Request TX counter."
|
|
::= { macFfArpCounterEntry 1 }
|
|
|
|
macFfArpCounterRequestRX OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Request RX counter."
|
|
::= { macFfArpCounterEntry 2 }
|
|
|
|
macFfArpCounterRequestRXDrop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Request RX drop counter."
|
|
::= { macFfArpCounterEntry 3 }
|
|
|
|
macFfArpCounterReplyTX OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Reply TX counter."
|
|
::= { macFfArpCounterEntry 4 }
|
|
|
|
macFfArpCounterReplyRX OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Reply RX counter."
|
|
::= { macFfArpCounterEntry 5 }
|
|
|
|
macFfArpCounterReplyRXDrop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Reply RX drop counter."
|
|
::= { macFfArpCounterEntry 6 }
|
|
|
|
------------------------------
|
|
-- adslStats
|
|
------------------------------
|
|
|
|
adslPortUtilTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslPortUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes adsl port utilization."
|
|
::= { adslStats 1 }
|
|
|
|
adslPortUtilEntry OBJECT-TYPE
|
|
SYNTAX AdslPortUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in adslPortUtilEntry."
|
|
INDEX {ifIndex}
|
|
::= { adslPortUtilTable 1 }
|
|
|
|
AdslPortUtilEntry ::=
|
|
SEQUENCE {
|
|
adslPortUtilTx INTEGER,
|
|
adslPortUtilRx INTEGER,
|
|
adslStatsXturInp DisplayString,
|
|
adslStatsXtucInp DisplayString
|
|
}
|
|
|
|
adslPortUtilTx OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measure adsl port's tx utilization."
|
|
::= { adslPortUtilEntry 1 }
|
|
|
|
adslPortUtilRx OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measure adsl port's rx utilization."
|
|
::= { adslPortUtilEntry 2 }
|
|
|
|
adslStatsXturInp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"XTUR minimum INP value."
|
|
::= { adslPortUtilEntry 3 }
|
|
|
|
adslStatsXtucInp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"XTUC minimum INP valu."
|
|
::= { adslPortUtilEntry 4 }
|
|
|
|
|
|
----------------------------------------
|
|
-- clear
|
|
----------------------------------------
|
|
|
|
counterClearTarget OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This managed object is used for identify the target on which
|
|
the counter would be cleared. The target is encoded as:
|
|
Byte 1: reserved
|
|
Byte 2~3: reserved
|
|
Byte 4: reserved
|
|
Byte 5~11:each octet specifies a set of eight ports, with the first
|
|
octet specifying ports 1 through 8, etc."
|
|
::= { clear 1 }
|
|
|
|
counterClearOps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding bit is set to 1 to start the operation.
|
|
The various bit positions are:
|
|
BIT 1: clear interface counters
|
|
BIT 2: clear pvc packet counters
|
|
BIT 3: not support
|
|
BIT 4: not support
|
|
BIT 5: clear DHCP counters
|
|
BIT 6: clear IGMP counters
|
|
BIT 7: clear IGMP port counters"
|
|
::= { clear 2 }
|
|
|
|
counterClearVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI of the pvc whose counters would be cleared."
|
|
::= { clear 3 }
|
|
|
|
counterClearVci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI of the pvc whose counters would be cleared."
|
|
::= { clear 4 }
|
|
|
|
END
|