david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/cdata/SPC200
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

2897 lines
146 KiB
Plaintext
Raw Blame History

-- File Name : SPC200.txt
-- Date : Wed Aug 23 14:03:00 CEST 2006
-- Author : Gilles Marceau
-- Date : Tue Jul 06 18:48:54 CEST 2004
-- Author : Luc Capanaccia
-- Date : Tue Jul 22 12:00:00 CEST 2004
-- Reviewed by : Gilles Dupont
-- Date : Mon Sep 13 12:00:00 CEST 2004
-- Reviewed by : Gilles Dupont
-- Date : Mon Sep 21 12:00:00 CEST 2004
-- Reviewed by : Gilles Dupont
-- Date : Tue Nov 16 12:30:00 CEST 2004
-- Reviewed by : Luc Capanaccia
-- Date : Fri Dec 17 12:30:00 CEST 2004
-- Reviewed by : Luc Capanaccia
-- Date : Thu Sep 15 14:00:00 CEST 2005
-- Reviewed by : Philippe Rimauro (Tag PR01)
-- Date : Thu Feb 08 14:03:00 CEST 2007
-- Author : Gilles Marceau
SPC200 DEFINITIONS ::= BEGIN
IMPORTS
RowStatus, TruthValue, MacAddress, DisplayString, TEXTUAL-CONVENTION
FROM SNMPv2-TC
AGENT-CAPABILITIES, OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32,
Counter32, IpAddress, Unsigned32, Gauge32
FROM SNMPv2-SMI
interfaces, ifIndex
FROM IF-MIB
spidcom
FROM SPIDCOM-MIB;
spc200MIB MODULE-IDENTITY
LAST-UPDATED "200412171230Z" -- December 17, 2004
ORGANIZATION "Organization"
CONTACT-INFO "Contact-info"
DESCRIPTION "Description"
REVISION "200412171230Z"
DESCRIPTION "Add software upgrade features"
REVISION "200411161230Z"
DESCRIPTION "Add adapt level table , commit and reset command"
REVISION "200409211200Z"
DESCRIPTION "Add quick access to channel modulation and pilots"
REVISION "200409131200Z"
DESCRIPTION "Add quick access to notches"
REVISION "200407221200Z"
DESCRIPTION "Corrected compilation errors"
REVISION "200407011757Z"
DESCRIPTION "Initial revision"
::= { spidcom 1 }
-- TEXTUAL-CONVENTIONS --
ModulationValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Modulation amplitude used by a group of carriers."
SYNTAX INTEGER { none ( 1 ) ,
bpsk ( 2 ) ,
qpsk ( 3 ) ,
qam16 ( 4 ) ,
qam64 ( 5 ) ,
qam256 ( 6 ) }
CarrierValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A group is composed of 8 carriers."
SYNTAX Integer32 ( 1 .. 8 )
PilotValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The pilot carrier wave can be chosen between
the carrier 1 up to carrier 128 inside a band carrier range."
SYNTAX Integer32 ( 1 .. 128 )
BandValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A channel is composed of 7 bands."
SYNTAX Integer32 ( 1 .. 7 )
PlcChannelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The different type of plc channels:
rx for the current reception channel,
rx last for the last reception channel,
tx for the current transmission channel."
SYNTAX INTEGER { rx ( 1 ) ,
rxLast ( 2 ) ,
tx ( 3 ) }
EstimationMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of Channel estimation process. Two are available:
- automatic, the equipment negociates the best configuration
with the remote equipment,
- manual, the operator defines the configuration."
SYNTAX INTEGER { automatic ( 1 ) ,
manual ( 2 ) }
GroupValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A band is composed of 16 groups."
SYNTAX Integer32 ( 1 .. 16 )
ResultValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Result value of input vectors."
SYNTAX INTEGER { success ( 1 ) ,
fail ( 2 ) }
AdaptValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The adapt level integer value."
SYNTAX Integer32 ( 0 .. 8191 )
ChannelBandwidthValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The channel bandwidth integer value."
SYNTAX Integer32 --PR01
SoftwareIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The software index."
SYNTAX Integer32 ( 1 .. 10 )
SoftwareActionResultValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Result value of software action process."
SYNTAX INTEGER { success ( 0 ) ,
on-going ( 1 ) ,
fileNotExist ( 2 ) ,
flashExhausted ( 3 ),
flashCorrupted ( 4 ),
notEnoughMemory ( 5 ),
invalidParameter ( 6 ),
genericError ( 7 ) }
SoftwareActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of software management action."
SYNTAX INTEGER { switch ( 1 ) ,
remove ( 2 ) }
--PR01 BEGIN
PlcModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of software management action."
SYNTAX INTEGER { ad-hoc ( 0 ) ,
slave ( 1 ) ,
master ( 2 ) }
--PR01 END
-- PLC data
plc OBJECT IDENTIFIER
::= { spc200MIB 1 }
-- statistic data
stats OBJECT IDENTIFIER
::= { plc 1 }
--PR01 BEGIN
-- protocol OBJECT IDENTIFIER
-- ::= { stats 1 }
-- ip OBJECT IDENTIFIER
-- ::= { protocol 1 }
-- mac OBJECT IDENTIFIER
-- ::= { protocol 2 }
-- plcp OBJECT IDENTIFIER
-- ::= { protocol 3 }
-- ipStatsTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IpStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table gathers all statistic data specific to
-- SPC200 chip relative to IP protocol. The data is
-- relative to the underlying interface that is under
-- the IP protocol layer. So the table index is
-- the ifIndex of such an interface."
-- ::= { ip 1 }
-- ipStatsEntry OBJECT-TYPE
-- SYNTAX IpStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This row contains IP statistic data specific to
-- SPC200 chip. The data is relevant for the interface
-- under the IP protocol layer."
-- INDEX { ifIndex }
-- ::= { ipStatsTable 1 }
-- IpStatsEntry ::= SEQUENCE {
-- ipInPkts Counter32,
-- ipInErrorPkts Counter32,
-- ipOutPkts Counter32,
-- ipOutErrorPkts Counter32,
-- ipInBridgedPkts Counter32
-- }
-- ipInPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of IP packets received by the interface
-- associated with this entry"
-- ::= { ipStatsEntry 1 }
-- ipInErrorPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of inbound IP packets that contained
-- errors preventing them from being deliverable to a
-- higher -layer protocol on the interface associated
-- with this entry."
-- ::= { ipStatsEntry 2 }
-- ipOutPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of outbound IP packets transmitted
-- out the interface associated with this entry"
-- ::= { ipStatsEntry 3 }
-- ipOutErrorPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of outbound IP packets that could not be
-- transmitted because of errors."
-- ::= { ipStatsEntry 4 }
-- ipInBridgedPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of IP packets bridged from the interface,
-- associated with this entry, and another one"
-- ::= { ipStatsEntry 5 }
-- ipInPackets OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of IP packets received
-- by the SPC200 CHIP"
-- ::= { ip 2 }
-- ipInErrorPackets OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of inbound IP packets that
-- contained errors preventing them from being delivered."
-- ::= { ip 3 }
-- ipOutPackets OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of outbound IP packets transmitted
-- out the interfaces"
-- ::= { ip 4 }
-- ipOutErrorPackets OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of outbound IP packets that could
-- not be transmitted because of errors."
-- ::= { ip 5 }
-- ipBridgedPackets OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of IP packets bridged"
-- ::= { ip 6 }
-- macStatsTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MacStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table gathers all SPC200 chip specific packet
-- statistics relative to MAC layer.
-- The data is relative to the underlying interface
-- that is under the MAC layer. So the table index is
-- the ifIndex of such an interface."
-- ::= { mac 1 }
-- macStatsEntry OBJECT-TYPE
-- SYNTAX MacStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This row contains MAC statistic data specific
-- to SPC200 chip. The data is relevant for the interface
-- under the MAC layer."
-- INDEX { ifIndex }
-- ::= { macStatsTable 1 }
--
-- MacStatsEntry ::= SEQUENCE {
-- macInPkts Counter32,
-- macInErrorPkts Counter32,
-- macOutPackets Counter32,
-- macOutErrorPkts Counter32
-- }
-- macInPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of MAC packets received by the interface
-- associated with this entry"
-- ::= { macStatsEntry 1 }
--
--
-- macInErrorPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of inbound MAC packets that contained
-- errors preventing them from being deliverable to
-- a higher -layer protocol on the interface
-- associated with this entry."
-- ::= { macStatsEntry 2 }
-- macOutPackets OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of outbound MAC packets transmitted
-- out the interface associated with this entry"
-- ::= { macStatsEntry 3 }
-- macOutErrorPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of outbound MAC packets that could not be
-- transmitted because of errors."
-- ::= { macStatsEntry 4 }
-- plcpStatsTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PlcpStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table gathers all SPC200 chip specific packet
-- statistics relative to PLCP protocol.
-- The data is relative to the underlying interface that
-- is under the PLCP protocol layer. So the table index
-- is the ifIndex of such an interface."
-- ::= { plcp 1 }
-- plcpStatsEntry OBJECT-TYPE
-- SYNTAX PlcpStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This row contains PLCP statistic data specific
-- to SPC200 chip. The data is relevant for the interface
-- under the PLCP layer."
-- INDEX { ifIndex }
-- ::= { plcpStatsTable 1 }
-- PlcpStatsEntry ::= SEQUENCE {
-- plcpInPkts Counter32,
-- plcpInErrorPkts Counter32,
-- plcpOutPkts Counter32,
-- plcpOutErrorPkts Counter32
-- }
-- plcpInPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of PLCP packets received by the interface
-- associated with this entry"
-- ::= { plcpStatsEntry 1 }
-- plcpInErrorPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of inbound PLCP packets that contained
-- errors preventing them from being deliverable to a
-- higher -layer protocol on the interface associated
-- with this entry."
-- ::= { plcpStatsEntry 2 }
-- plcpOutPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The total number of outbound PLCP packets transmitted
-- out the interface associated with this entry"
-- ::= { plcpStatsEntry 3 }
-- plcpOutErrorPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The number of outbound PLCP packets that could not be
-- transmitted because of errors."
-- ::= { plcpStatsEntry 4 }
--PR01 END
portStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table gathers all statistic data specific
to SPC200 chip relative to plc connection."
::= { stats 2 }
portStatsEntry OBJECT-TYPE
SYNTAX PortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains statistic data specific to
SPC200 chip relative to a connection."
INDEX { plcBasePortIndex,
portStatsBandIndex,
portStatsGroupIndex,
portStatsCarrierIndex }
::= { portStatsTable 1 }
PortStatsEntry ::= SEQUENCE {
portStatsBandIndex BandValue,
portStatsGroupIndex GroupValue,
portStatsCarrierIndex CarrierValue,
portStatsSignal Counter32,
portStatsNoise Counter32
-- portStatsBer Counter32
}
portStatsBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number on which the signal,
noise, ber data are collected."
::= { portStatsEntry 1 }
portStatsGroupIndex OBJECT-TYPE
SYNTAX GroupValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The group number on which the signal,
noise, ber data are collected"
::= { portStatsEntry 2 }
portStatsCarrierIndex OBJECT-TYPE
SYNTAX CarrierValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The group number on which the signal,
noise, ber data are collected"
::= { portStatsEntry 3 }
portStatsSignal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DB value of the signal associated
with the carrier wave entry."
::= { portStatsEntry 4 }
portStatsNoise OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DB value of the noise associated
with the carrier wave entry."
::= { portStatsEntry 5 }
--PR01 BEGIN
-- portStatsBer OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The BER value * 100 associated
-- with the carrier wave entry."
-- ::= { portStatsEntry 6 }
--PR01 END
portStats2Table OBJECT-TYPE
SYNTAX SEQUENCE OF PortStats2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table gathers all statistic data specific to
SPC200 chip relative to plc channels. This table has
the same information as the portChannelStatsTable
but in a more compact way. This table has been added
to deal with possible slow performances."
::= { stats 3 }
portStats2Entry OBJECT-TYPE
SYNTAX PortStats2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains statistic data specific to
SPC200 chip relative to a connection."
INDEX { plcBasePortIndex,
plcModBandIndex }
::= { portStats2Table 1 }
PortStats2Entry ::= SEQUENCE {
portStats2Signal OCTET STRING,
portStats2Noise OCTET STRING,
--PR01 BEGIN
-- portStats2Ber OCTET STRING,
portStats2AvgBandAtt Counter32,
portStats2AvgBandSNR Counter32
--PR01 END
}
portStats2Signal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The values of the signal for all the carrier waves.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is coded on two bytes.
There is one value for each 128 carriers of the
considered band."
::= { portStats2Entry 1 }
portStats2Noise OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The values of the noise for all the carrier waves.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is coded on two bytes.
There is one value for each 128 carriers of the
considered band."
::= { portStats2Entry 2 }
-- portStats2Ber OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The values of the signal for all the carrier waves.
-- The expected format is VALUE VALUE VALUE ... VALUE.
-- Each value is coded on two bytes.
-- There is one value for each 128 carriers of the
-- considered band.
-- The VALUE represents the BER value * 10000."
-- ::= { portStats2Entry 3 }
--PR01 BEGIN
portStats2AvgBandAtt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average attenuation per band (dB)."
::= { portStats2Entry 3 }
portStats2AvgBandSNR OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average SNR per band (dB)."
::= { portStats2Entry 4 }
--PR01 END
--PR01 BEGIN
portStats3Table OBJECT-TYPE
SYNTAX SEQUENCE OF PortStats3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table gathers all statistic data specific to
SPC200 chip relative to plc channels. This table has
the same information as the portChannelStatsTable
but in a more compact way. This table has been added
to deal with possible slow performances."
::= { stats 4 }
portStats3Entry OBJECT-TYPE
SYNTAX PortStats3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains statistic data specific to
SPC200 chip relative to a connection."
INDEX { plcBasePortIndex }
::= { portStats3Table 1 }
PortStats3Entry ::= SEQUENCE {
portStats3AvgAtt Counter32,
portStats3AvgSNR Counter32
}
portStats3AvgAtt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average attenuation on the link (dB)."
::= { portStats3Entry 1 }
portStats3AvgSNR OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average SNR on the link (dB)."
::= { portStats3Entry 2 }
bootstats OBJECT-IDENTITY
STATUS current
DESCRIPTION "boot statistics"
::= { stats 5 }
bootstatsBoot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot"
::= { bootstats 1 }
bootstatsManualReset OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Manual reset"
::= { bootstats 2 }
bootstatsFailureReset OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Failure reset"
::= { bootstats 3 }
--PR01 END
-- configuration data
plcObjects OBJECT IDENTIFIER
::= { plc 2 }
plcMode OBJECT-TYPE -- PR01
SYNTAX PlcModeType --PR01
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Plc Mode"
::= { plcObjects 1 }
plcTopo OBJECT IDENTIFIER
::= { plcObjects 2 }
plcNodeConfiguration OBJECT IDENTIFIER
::= { plcObjects 3 }
--PR01 BEGIN
plcSNAnalyser OBJECT IDENTIFIER
::= { plcObjects 4 }
plcSNAnalyserEnable OBJECT-TYPE
SYNTAX INTEGER { true ( 1 ) ,
false ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "true if the modem should turn to spectrum analyser mode.
In this mode the modem enters a receive only mode,
and captures periodic samples of the signal on the powerline.
The spectrum analyser mode shall be disabled for normal
powerline modem operation."
::= { plcSNAnalyser 1 }
plcSNAnalyserTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcSNAnalyserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table gathers all statistic data specific to
SPC200 chip relative to plc analyser."
::= { plcSNAnalyser 2 }
plcSNAnalyserEntry OBJECT-TYPE
SYNTAX PlcSNAnalyserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains statistic data specific to
SPC200 chip relative to a band."
INDEX { plcModBandIndex }
::= { plcSNAnalyserTable 1 }
PlcSNAnalyserEntry ::= SEQUENCE {
plcSNAnalyserMinSignal OCTET STRING,
plcSNAnalyserMaxSignal OCTET STRING,
plcSNAnalyserAvgSignal OCTET STRING,
plcSNAnalyserLastSignal OCTET STRING,
plcSNAnalyserFFTDiv Counter32
}
plcSNAnalyserMinSignal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum signal measured over several samples for the
associated carrier wave entry. The value is expressed
in Glomer<65> which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer<65>) - 113"
::= { plcSNAnalyserEntry 1 }
plcSNAnalyserMaxSignal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum signal measured on several samples for the
associated carrier wave entry. The value is expressed
in Glomer<65> which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer<65>) - 113"
::= { plcSNAnalyserEntry 2 }
plcSNAnalyserAvgSignal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average signal measured on several samples for the
associated carrier wave entry. The value is expressed
in Glomer<65> which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer<65>) - 113"
::= { plcSNAnalyserEntry 3 }
plcSNAnalyserLastSignal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signal measured for last sample on the associated
carrier wave entry. The value is expressed
in Glomer<65> which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer<65>) - 113"
::= { plcSNAnalyserEntry 4 }
plcSNAnalyserFFTDiv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FFT division factor on the associated band."
::= { plcSNAnalyserEntry 5 }
plcSNAnalyserAGC OBJECT-TYPE
SYNTAX Integer32 ( 0..255 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gain factor in dB, as used by the
Automatic Gain Control last sample"
::= { plcSNAnalyser 3 }
plcAGCAnalyser OBJECT IDENTIFIER
::= { plcObjects 5 }
plcAGCAnalyserEnable OBJECT-TYPE
SYNTAX INTEGER { true ( 1 ) ,
false ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { plcAGCAnalyser 1 }
plcAGCAnalyserSamplesPart1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { plcAGCAnalyser 2 }
plcAGCAnalyserSamplesPart2 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { plcAGCAnalyser 3 }
--PR01 END
plcTopoChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes detected
by this plc bridge since the management entity
was last reset or initialized. Such changes
concerns only
- the plcBasePortTable rows
- the plcBasePortTable columns
except for plcBasePortChannelEstimation"
::= { plcTopo 1 }
plcBasePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the list of plc remote connection"
::= { plcTopo 2 }
plcBasePortEntry OBJECT-TYPE
SYNTAX PlcBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains plc remote connection information"
INDEX { plcBasePortIndex }
::= { plcBasePortTable 1 }
PlcBasePortEntry ::= SEQUENCE {
plcBasePortIndex MacAddress,
plcBasePortAddress MacAddress,
plcBasePortChannelEstimation EstimationMode,
plcBasePortAttenuation Counter32 }
plcBasePortIndex OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address of the MAC layer above
the plc interface of the remote PLC equipment."
::= { plcBasePortEntry 1 }
plcBasePortAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of the MAC layer above
the plc interface of the remote PLC equipment."
::= { plcBasePortEntry 2 }
plcBasePortChannelEstimation OBJECT-TYPE
SYNTAX EstimationMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable the automatic channel
estimation processus."
::= { plcBasePortEntry 3 }
plcBasePortAttenuation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link attenuation (dB)."
::= { plcBasePortEntry 4 }
plcChannelModulationStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcChannelModulationStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains string values for a quick access to
the modulation amplitude configurations of all active
channels."
::= { plcTopo 3 }
plcChannelModulationStringEntry OBJECT-TYPE
SYNTAX PlcChannelModulationStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains string values for a quick access to
the modulation amplitude configuration
of each active channel of the remote
connection referenced by plcBasePortIndex."
INDEX { plcBasePortIndex }
::= { plcChannelModulationStringTable 1 }
PlcChannelModulationStringEntry ::= SEQUENCE {
plcRxChannelModulation OCTET STRING,
plcRxLastChannelModulation OCTET STRING,
plcTxChannelModulation OCTET STRING }
plcRxChannelModulation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude values for the Rx channel of
a given remote connection entry.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing two modulation values.
Each modulation is coded on 4 bits.
There are ( 16 groups * 7 bands ) / 2 = 66 values."
::= { plcChannelModulationStringEntry 1 }
plcRxLastChannelModulation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude values for the Rx Last channel of
a given remote connection entry.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing two modulation values.
Each modulation is coded on 4 bits representing ModulationValue - 1.
There are ( 16 groups * 7 bands ) / 2 = 66 values."
::= { plcChannelModulationStringEntry 2 }
plcTxChannelModulation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude values for the Tx channel of
a given remote connection entry.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing two modulation values.
Each modulation is coded on 4 bits.
There are ( 16 groups * 7 bands ) / 2 = 66 values."
::= { plcChannelModulationStringEntry 3 }
plcChannelModulationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcChannelModulationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the modulation amplitude
configuration of all active channels."
::= { plcTopo 4 }
plcChannelModulationEntry OBJECT-TYPE
SYNTAX PlcChannelModulationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains modulation amplitude configuration
of the channel, referenced by the plcPortChannelIndex,
of the remote connection referenced by
plcBasePortIndex."
INDEX { plcBasePortIndex,
plcPortChannelIndex,
plcModBandIndex }
::= { plcChannelModulationTable 1 }
PlcChannelModulationEntry ::= SEQUENCE {
plcModBandIndex BandValue,
plcModGroup1 ModulationValue,
plcModGroup2 ModulationValue,
plcModGroup3 ModulationValue,
plcModGroup4 ModulationValue,
plcModGroup5 ModulationValue,
plcModGroup6 ModulationValue,
plcModGroup7 ModulationValue,
plcModGroup8 ModulationValue,
plcModGroup9 ModulationValue,
plcModGroup10 ModulationValue,
plcModGroup11 ModulationValue,
plcModGroup12 ModulationValue,
plcModGroup13 ModulationValue,
plcModGroup14 ModulationValue,
plcModGroup15 ModulationValue,
plcModGroup16 ModulationValue
}
plcModBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number of which the modulations are defined"
::= { plcChannelModulationEntry 1 }
plcModGroup1 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the first group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 2 }
plcModGroup2 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the second group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 3 }
plcModGroup3 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the third group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 4 }
plcModGroup4 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the fourth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 5 }
plcModGroup5 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the fifth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 6 }
plcModGroup6 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the sixth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 7 }
plcModGroup7 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the seventh group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 8 }
plcModGroup8 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the eighth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 9 }
plcModGroup9 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the nineth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 10 }
plcModGroup10 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the tenth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 11 }
plcModGroup11 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the eleventh group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 12 }
plcModGroup12 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the twelveth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 13 }
plcModGroup13 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the thirteenth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 14 }
plcModGroup14 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the fourteenth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 15 }
plcModGroup15 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the fifteenth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 16 }
plcModGroup16 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modulation amplitude of the sixteenth group
of the band entry of the channel entry
for a given remote connection entry."
::= { plcChannelModulationEntry 17 }
plcChannelModulationInput OBJECT IDENTIFIER
::= { plcTopo 5 }
plcModulationInputAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MAC address of the MAC layer above
the plc interface of the remote
PLC equipment for which the modulation
value changes are requested."
::= { plcChannelModulationInput 1 }
plcModulationInputChannel OBJECT-TYPE
SYNTAX PlcChannelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The channel type of the remote PLC equipment
for which the modulation value changes
are requested."
::= { plcChannelModulationInput 2 }
plcModulationInputBand OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The band number of which the modulation value
changes are requested."
::= { plcChannelModulationInput 3 }
plcInputModulationGroup1 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
first group of the considered band and
channel input values."
::= { plcChannelModulationInput 4 }
plcInputModulationGroup2 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
second group of the considered band and
channel input values."
::= { plcChannelModulationInput 5 }
plcInputModulationGroup3 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
third group of the considered band and
channel input values."
::= { plcChannelModulationInput 6 }
plcInputModulationGroup4 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
fourth group of the considered band and
channel input values."
::= { plcChannelModulationInput 7 }
plcInputModulationGroup5 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
fifth group of the considered band and
channel input values."
::= { plcChannelModulationInput 8 }
plcInputModulationGroup6 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
sixth group of the considered band and
channel input values."
::= { plcChannelModulationInput 9 }
plcInputModulationGroup7 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
seventh group of the considered band and
channel input values."
::= { plcChannelModulationInput 10 }
plcInputModulationGroup8 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
eighth group of the considered band and
channel input values."
::= { plcChannelModulationInput 11 }
plcInputModulationGroup9 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
nineth group of the considered band and
channel input values."
::= { plcChannelModulationInput 12 }
plcInputModulationGroup10 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
tenth group of the considered band and
channel input values."
::= { plcChannelModulationInput 13 }
plcInputModulationGroup11 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
eleventh group of the considered band and
channel input values."
::= { plcChannelModulationInput 14 }
plcInputModulationGroup12 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
twelveth group of the considered band and
channel input values."
::= { plcChannelModulationInput 15 }
plcInputModulationGroup13 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
thirteenth group of the considered band and
channel input values."
::= { plcChannelModulationInput 16 }
plcInputModulationGroup14 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
fourteenth group of the considered band and
channel input values."
::= { plcChannelModulationInput 17 }
plcInputModulationGroup15 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
fifteenth group of the considered band and
channel input values."
::= { plcChannelModulationInput 18 }
plcInputModulationGroup16 OBJECT-TYPE
SYNTAX ModulationValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new requested modulation amplitude of the
sixteenth group of the considered band and
channel input values."
::= { plcChannelModulationInput 19 }
plcModulationInputProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request a modification of all the modulations
associated to a band and a channel of a remote
PLC equipment."
::= { plcChannelModulationInput 20 }
plcModulationInputResult OBJECT-TYPE
SYNTAX ResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested modulation value changes."
::= { plcChannelModulationInput 21 }
plcPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the list of plc channels"
::= { plcTopo 6 }
plcPortChannelEntry OBJECT-TYPE
SYNTAX PlcPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains plc channel information"
INDEX { plcBasePortIndex, plcPortChannelIndex }
::= { plcPortChannelTable 1 }
PlcPortChannelEntry ::= SEQUENCE {
plcPortChannelIndex Unsigned32,
plcPortChannelType PlcChannelType,
plcPortChannelGain Integer32,
plcPortChannelBandwidth ChannelBandwidthValue,
plcPortChannelMaxBandwidth ChannelBandwidthValue,
plcPortChannelSynchronizationBand BandValue
}
plcPortChannelIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The channel number belongs to the remote connection
with plc equipment associated with the
plcBasePortIndex value.
Only three channels are expected.
Index 1 for RX channel
Index 2 for RXLast channel
index 3 for TX channel"
::= { plcPortChannelEntry 1 }
plcPortChannelType OBJECT-TYPE
SYNTAX PlcChannelType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The channel type."
::= { plcPortChannelEntry 2 }
plcPortChannelGain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The gain associated with the channel."
::= { plcPortChannelEntry 3 }
plcPortChannelBandwidth OBJECT-TYPE
SYNTAX ChannelBandwidthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bandwidth of the channel in Kbit/s."
::= { plcPortChannelEntry 4 }
--PR01 BEGIN
plcPortChannelMaxBandwidth OBJECT-TYPE
SYNTAX ChannelBandwidthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum bandwidth of the channel in Kbit/s."
::= { plcPortChannelEntry 5 }
--PR01 END
plcPortChannelSynchronizationBand OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The synchronization band used for this channel."
::= { plcPortChannelEntry 6 }
plcChannelPilotStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcChannelPilotStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the string values representing
of pilot values of all active channels."
::= { plcTopo 7 }
plcChannelPilotStringEntry OBJECT-TYPE
SYNTAX PlcChannelPilotStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains a quick access for pilot values ,
of the remote connection referenced by
plcBasePortIndex."
INDEX { plcBasePortIndex }
::= { plcChannelPilotStringTable 1 }
PlcChannelPilotStringEntry ::= SEQUENCE {
plcRxChannelPilots OCTET STRING,
plcRxLastChannelPilots OCTET STRING,
plcTxChannelPilots OCTET STRING}
plcRxChannelPilots OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The carrier wave numbers which support
the pilot waves for the Rx Channel.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands."
::= { plcChannelPilotStringEntry 1 }
plcRxLastChannelPilots OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The carrier wave numbers which support
the pilot waves for the Rx Last Channel.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands."
::= { plcChannelPilotStringEntry 2 }
plcTxChannelPilots OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The carrier wave numbers which support
the pilot waves for the Tx Channel.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands."
::= { plcChannelPilotStringEntry 3 }
plcChannelPilotsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcChannelPilotsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This tabel contains pilots configuration
for each plc channel."
::= { plcTopo 8 }
plcChannelPilotsEntry OBJECT-TYPE
SYNTAX PlcChannelPilotsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains the pilots 1 and 2 configuration
for a channel defined by the
couple (plcBasePortIndex, plcPortChannelIndex)"
INDEX { plcBasePortIndex,
plcPortChannelIndex,
plcChannelPilotBandIndex }
::= { plcChannelPilotsTable 1 }
PlcChannelPilotsEntry ::= SEQUENCE {
plcChannelPilotBandIndex BandValue,
plcChannelPilot1 PilotValue,
plcChannePilot2 PilotValue
}
plcChannelPilotBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number on which the pilots are defined."
::= { plcChannelPilotsEntry 1 }
plcChannelPilot1 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The carrier wave number which supports
the first pilot wave for the channel
associated with this entry."
::= { plcChannelPilotsEntry 2 }
plcChannePilot2 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The carrier wave number which supports
the second pilot wave for the channel
associated with this entry."
::= { plcChannelPilotsEntry 3 }
plcChannelPilotsInput OBJECT IDENTIFIER
::= { plcTopo 9 }
plcPilotsInputAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MAC address of the MAC layer above
the plc interface of the remote
PLC equipment for which the pilot
value changes are requested."
::= { plcChannelPilotsInput 1 }
plcPilotsInputChannel OBJECT-TYPE
SYNTAX PlcChannelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The channel type of the remote PLC equipment
for which the pilot value changes
are requested."
::= { plcChannelPilotsInput 2 }
plcPilotsInputBand OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The band number of which the pilots value
changes are requested."
::= { plcChannelPilotsInput 3 }
plcInputChannelPilot1 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The carrier wave number which supports
the first pilot wave for the considered band and
channel input values."
::= { plcChannelPilotsInput 4 }
plcInputChannelPilot2 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The carrier wave number which supports
the second pilot wave for the considered band and
channel input values."
::= { plcChannelPilotsInput 5 }
plcPilotsInputProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request a modification of the first and second pilot
associated to a band and a channel of a remote
PLC equipment."
::= { plcChannelPilotsInput 6 }
plcPilotsInputResult OBJECT-TYPE
SYNTAX ResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested pilot values changes."
::= { plcChannelPilotsInput 7 }
plcNodeNotches OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The values of the notches for all the node bands.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing the 8 notches of
each group. There is one value for each 7 * 16 bands."
::= { plcNodeConfiguration 1 }
plcNodeNotchesTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcNodeNotchesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains Notches configuration
for the SPC200 chip."
::= { plcNodeConfiguration 2 }
plcNodeNotchesEntry OBJECT-TYPE
SYNTAX PlcNodeNotchesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains Notches configuration for a group.
The group is defined by the couple
(plcNodeNotchesGroupIndex, plcNodeNotchesBandIndex)."
INDEX { plcNodeNotchesBandIndex, plcNodeNotchesGroupIndex }
::= { plcNodeNotchesTable 1 }
PlcNodeNotchesEntry ::= SEQUENCE {
plcNodeNotchesBandIndex BandValue,
plcNodeNotchesGroupIndex GroupValue,
plcNodeNotchesCarrier1 TruthValue,
plcNodeNotchesCarrier2 TruthValue,
plcNodeNotchesCarrier3 TruthValue,
plcNodeNotchesCarrier4 TruthValue,
plcNodeNotchesCarrier5 TruthValue,
plcNodeNotchesCarrier6 TruthValue,
plcNodeNotchesCarrier7 TruthValue,
plcNodeNotchesCarrier8 TruthValue
}
plcNodeNotchesBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number on which the notches are defined."
::= { plcNodeNotchesEntry 1 }
plcNodeNotchesGroupIndex OBJECT-TYPE
SYNTAX GroupValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The group number on which the notches are defined."
::= { plcNodeNotchesEntry 2 }
plcNodeNotchesCarrier1 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the first carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 3 }
plcNodeNotchesCarrier2 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the second carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 4 }
plcNodeNotchesCarrier3 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the third carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 5 }
plcNodeNotchesCarrier4 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the fourth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 6 }
plcNodeNotchesCarrier5 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the fifth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 7 }
plcNodeNotchesCarrier6 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the sixth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 8 }
plcNodeNotchesCarrier7 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the seventh carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 9 }
plcNodeNotchesCarrier8 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tell if the eighth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesEntry 10 }
plcNodeNotchesInput OBJECT IDENTIFIER
::= { plcNodeConfiguration 3 }
plcNodeNotchesInputBand OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The band number on which the notches value
changes are requested."
::= { plcNodeNotchesInput 1 }
plcNodeNotchesInputGroup OBJECT-TYPE
SYNTAX GroupValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The group number on which the notches value
changes are requested."
::= { plcNodeNotchesInput 2 }
plcNodeNotchesInputCarrier1 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The first carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 3 }
plcNodeNotchesInputCarrier2 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The second carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 4 }
plcNodeNotchesInputCarrier3 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The third carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 5 }
plcNodeNotchesInputCarrier4 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The fourth carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 6 }
plcNodeNotchesInputCarrier5 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The eighth carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 7 }
plcNodeNotchesInputCarrier6 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The eighth carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 8 }
plcNodeNotchesInputCarrier7 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The seventh carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 9 }
plcNodeNotchesInputCarrier8 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The eighth carrier of the considered group and
band is a notch carrier.
The true value means the current carrier is a notch."
::= { plcNodeNotchesInput 10 }
plcNodeNotchesInputProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request a modification of the carrier notches
associated to the considered group and
band."
::= { plcNodeNotchesInput 11 }
plcNodeNotchesInputResult OBJECT-TYPE
SYNTAX ResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested node carrier notches value changes."
::= { plcNodeNotchesInput 12 }
plcNodePilots OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The values of the pilot for all the node bands.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands."
::= { plcNodeConfiguration 4 }
plcNodePilotsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcNodePilotsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains pilot values
used by default on all channels."
::= { plcNodeConfiguration 5 }
plcNodePilotsEntry OBJECT-TYPE
SYNTAX PlcNodePilotsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains pilot values
used by default on a band.
The band is defined by the index
plcNodePilotsBandIndex."
INDEX { plcNodePilotsBandIndex }
::= { plcNodePilotsTable 1 }
PlcNodePilotsEntry ::= SEQUENCE {
plcNodePilotsBandIndex BandValue,
plcNodePilot1 PilotValue,
plcNodePilot2 PilotValue
}
plcNodePilotsBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number on which the pilot values are defined."
::= { plcNodePilotsEntry 1 }
plcNodePilot1 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The default carrier wave number
which supports the first pilot wave."
::= { plcNodePilotsEntry 2 }
plcNodePilot2 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The default carrier wave number
which supports the second pilot wave."
::= { plcNodePilotsEntry 3 }
plcNodePilotsInput OBJECT IDENTIFIER
::= { plcNodeConfiguration 6 }
plcNodePilotsInputBand OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The band number on which the pilot values
changes are requested."
::= { plcNodePilotsInput 1 }
plcInputNodePilot1 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default carrier wave number
which supports the first pilot wave of
the considered band."
::= { plcNodePilotsInput 2 }
plcInputNodePilot2 OBJECT-TYPE
SYNTAX PilotValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default carrier wave number
which supports the second pilot wave of
the considered band."
::= { plcNodePilotsInput 3 }
plcNodePilotsInputProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request a modification of the pilot values
associated to the considered band."
::= { plcNodePilotsInput 4 }
plcNodePilotsInputResult OBJECT-TYPE
SYNTAX ResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested node pilot values changes."
::= { plcNodePilotsInput 5 }
plcNodeAdaptsStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcNodeAdaptsStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains string values for a
quick access to the adapt configurations
of all the carriers."
::= { plcNodeConfiguration 7 }
plcNodeAdaptsStringEntry OBJECT-TYPE
SYNTAX PlcNodeAdaptsStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains string values for a quick access to
the adapt configuration
of each carrier of a band."
INDEX { plcBasePortIndex , plcNodeAdaptsStringBandIndex }
::= { plcNodeAdaptsStringTable 1 }
PlcNodeAdaptsStringEntry ::= SEQUENCE {
plcNodeAdaptsStringBandIndex BandValue,
plcNodeAdaptsStringBand OCTET STRING }
plcNodeAdaptsStringBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number on which the adapt values are defined."
::= { plcNodeAdaptsStringEntry 1 }
plcNodeAdaptsStringBand OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt values of the 128 carriers of a band.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is two octets representing one adapt carrier
level.
There are ( 16 groups * 8 carriers) = 128 values."
::= { plcNodeAdaptsStringEntry 2 }
plcNodeAdaptsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcNodeAdaptsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains adapt level configuration
for each carrier of the node."
::= { plcNodeConfiguration 8 }
plcNodeAdaptsEntry OBJECT-TYPE
SYNTAX PlcNodeAdaptsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains adapt level values
for a group of carriers.
The group is defined by the couple
(plcNodeAdaptsBandIndex,plcNodeAdaptsGroupIndex)."
INDEX { plcNodeAdaptsBandIndex,plcNodeAdaptsGroupIndex }
::= { plcNodeAdaptsTable 1 }
PlcNodeAdaptsEntry ::= SEQUENCE {
plcNodeAdaptsBandIndex BandValue,
plcNodeAdaptsGroupIndex GroupValue,
plcNodeAdaptsCarrier1 AdaptValue,
plcNodeAdaptsCarrier2 AdaptValue,
plcNodeAdaptsCarrier3 AdaptValue,
plcNodeAdaptsCarrier4 AdaptValue,
plcNodeAdaptsCarrier5 AdaptValue,
plcNodeAdaptsCarrier6 AdaptValue,
plcNodeAdaptsCarrier7 AdaptValue,
plcNodeAdaptsCarrier8 AdaptValue
}
plcNodeAdaptsBandIndex OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The band number on which the adapt values are defined."
::= { plcNodeAdaptsEntry 1 }
plcNodeAdaptsGroupIndex OBJECT-TYPE
SYNTAX GroupValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The group number on which the adapt values are defined."
::= { plcNodeAdaptsEntry 2 }
plcNodeAdaptsCarrier1 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the first carrier of the group."
::= { plcNodeAdaptsEntry 3 }
plcNodeAdaptsCarrier2 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the second carrier of the group."
::= { plcNodeAdaptsEntry 4 }
plcNodeAdaptsCarrier3 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the third carrier of the group."
::= { plcNodeAdaptsEntry 5 }
plcNodeAdaptsCarrier4 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the fourth carrier of the group."
::= { plcNodeAdaptsEntry 6 }
plcNodeAdaptsCarrier5 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the fifth carrier of the group."
::= { plcNodeAdaptsEntry 7 }
plcNodeAdaptsCarrier6 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the sixth carrier of the group."
::= { plcNodeAdaptsEntry 8 }
plcNodeAdaptsCarrier7 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the seventh carrier of the group."
::= { plcNodeAdaptsEntry 9 }
plcNodeAdaptsCarrier8 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The adapt level of the eighth carrier of the group."
::= { plcNodeAdaptsEntry 10 }
plcNodeAdaptsInput OBJECT IDENTIFIER
::= { plcNodeConfiguration 9 }
plcNodeAdaptsInputBand OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The band number on which the adapt level value
changes are requested."
::= { plcNodeAdaptsInput 1 }
plcNodeAdaptsInputGroup OBJECT-TYPE
SYNTAX GroupValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The group number on which the adapt level value
changes are requested."
::= { plcNodeAdaptsInput 2 }
plcNodeAdaptsInputCarrier1 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the first carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 3 }
plcNodeAdaptsInputCarrier2 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the second carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 4 }
plcNodeAdaptsInputCarrier3 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the third carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 5 }
plcNodeAdaptsInputCarrier4 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the fourth carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 6 }
plcNodeAdaptsInputCarrier5 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the fifth carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 7 }
plcNodeAdaptsInputCarrier6 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the sixth carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 8 }
plcNodeAdaptsInputCarrier7 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the seventh carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 9 }
plcNodeAdaptsInputCarrier8 OBJECT-TYPE
SYNTAX AdaptValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The adapt level of the eighth carrier of the
considered group of the chosen band."
::= { plcNodeAdaptsInput 10 }
plcNodeAdaptsInputProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request a modification of the carrier
adapt level associated to the considered group and
band."
::= { plcNodeAdaptsInput 11 }
plcNodeAdaptsInputResult OBJECT-TYPE
SYNTAX ResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested node adapt level
value changes."
::= { plcNodeAdaptsInput 12 }
plcNodeNetConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlcNodeNetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains ip and mac
addresses of the node."
::= { plcNodeConfiguration 10 }
plcNodeNetConfigEntry OBJECT-TYPE
SYNTAX PlcNodeNetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains ip and mac address
used by an interface."
INDEX { ifIndex }
::= { plcNodeNetConfigTable 1 }
PlcNodeNetConfigEntry ::= SEQUENCE {
plcNodeIpAddr IpAddress,
plcNodeNetMask IpAddress,
plcNodeMacAddr MacAddress,
plcNodeGateway IpAddress
}
plcNodeIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the IP layer above the interface."
::= { plcNodeNetConfigEntry 1 }
plcNodeNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP Subnet mask of the IP layer above the interface."
::= { plcNodeNetConfigEntry 2 }
plcNodeMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MAC address of the MAC layer above the interface."
::= { plcNodeNetConfigEntry 3 }
plcNodeGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Gateway address of the IP layer above the interface."
::= { plcNodeNetConfigEntry 4 }
plcNodeActions OBJECT IDENTIFIER
::= { plcNodeConfiguration 11 }
plcNodeActionsCommit OBJECT IDENTIFIER
::= { plcNodeActions 1 }
plcNodeActionsCommitProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request the commit of the configuration
changes into the flash memory"
::= { plcNodeActionsCommit 1 }
plcNodeActionsCommitResult OBJECT-TYPE
SYNTAX ResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested flash commit operation."
::= { plcNodeActionsCommit 2 }
plcNodeActionsReset OBJECT IDENTIFIER
::= { plcNodeActions 2 }
plcNodeActionsResetProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request the reset of the node.
This operation will terminate the communication
between the manager and the node"
::= { plcNodeActionsReset 1 }
plcNodeActionsCarrier OBJECT IDENTIFIER
::= { plcNodeActions 3 }
plcNodeActionsCarrierFlatProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request the equipment to flat the signal"
::= { plcNodeActionsCarrier 1 }
plcBssId OBJECT IDENTIFIER
::= { plcObjects 6 }
plcMasterBssId OBJECT-TYPE
SYNTAX INTEGER(0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the master Bss Id"
::= { plcBssId 1 }
plcSlaveBssId OBJECT-TYPE
SYNTAX INTEGER(0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the slave Bss Id"
::= { plcBssId 2 }
plcSpy OBJECT IDENTIFIER
::= { plcObjects 7 }
plcSpyIsDynamic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to set the spy dynamic mode"
::= { plcSpy 1 }
plcStaticSpySynchBandNb OBJECT-TYPE
SYNTAX BandValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The synchronization band number used for static spy mode"
::= { plcSpy 2 }
-- software upload
softwareMgnt OBJECT IDENTIFIER
::= { plc 3 }
-- current version
currentSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the current software release."
::= { softwareMgnt 1 }
currentSoftwareBoardVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the current software board release."
::= { softwareMgnt 2 }
currentSoftwareAFEVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the current software Analog Front End release."
::= { softwareMgnt 3 }
-- table of software
softwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoftwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the current and reserve
softwares of the node."
::= { softwareMgnt 4 }
softwareEntry OBJECT-TYPE
SYNTAX SoftwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This row contains software information."
INDEX { softwareIndex }
::= { softwareTable 1 }
SoftwareEntry ::= SEQUENCE {
softwareIndex SoftwareIndex,
softwareVersion DisplayString
}
softwareIndex OBJECT-TYPE
SYNTAX SoftwareIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index number of the software."
::= { softwareEntry 1 }
softwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the software release."
::= { softwareEntry 2 }
-- upload software action
softwareUpload OBJECT IDENTIFIER
::= { softwareMgnt 5 }
softwareUploadTFTPServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the TFTP serveur"
::= { softwareUpload 1 }
softwareUploadLogin OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user login on the TFTP server"
::= { softwareUpload 2 }
softwareUploadPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user password on the TFTP server.
Warning: This field is displayed using 6 * characters"
::= { softwareUpload 3 }
softwareUploadFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The software file name to upload"
::= { softwareUpload 4 }
softwareUploadProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request the uploading to start"
::= { softwareUpload 5 }
softwareUploadResult OBJECT-TYPE
SYNTAX SoftwareActionResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested uploading"
::= { softwareUpload 6 }
softwareUploadTFTPServerPort OBJECT-TYPE -- PR01
SYNTAX Integer32 ( 0..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The service port of the TFTP server"
::= { softwareUpload 7 }
-- software action
softwareAction OBJECT IDENTIFIER
::= { softwareMgnt 6 }
softwareActionIndex OBJECT-TYPE
SYNTAX SoftwareIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of the reserve software"
::= { softwareAction 1 }
softwareActionType OBJECT-TYPE
SYNTAX SoftwareActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type of the software action software:
switch, remove "
::= { softwareAction 2 }
softwareActionProceed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True to request the switch between the current
and the reserver software to start"
::= { softwareAction 3 }
softwareActionResult OBJECT-TYPE
SYNTAX SoftwareActionResultValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result value of the requested action"
::= { softwareAction 4 }
-- compliance
plcConformance OBJECT IDENTIFIER
::= { plc 4 }
plcCompliances OBJECT IDENTIFIER
::= { plcConformance 1 }
plcGroups OBJECT IDENTIFIER
::= { plcConformance 2 }
plcCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for SPC200 chip."
MODULE
MANDATORY-GROUPS { nodeGroup, topologyGroup }
GROUP statisticGroup
DESCRIPTION "This group is mandatory for
channel performances analysis"
::= { plcCompliances 1 }
nodeGroup OBJECT-GROUP
OBJECTS { plcNodeNotches, plcMode,
plcNodeNotchesCarrier1, plcNodeNotchesCarrier2,
plcNodeNotchesCarrier3, plcNodeNotchesCarrier4,
plcNodeNotchesCarrier5, plcNodeNotchesCarrier6,
plcNodeNotchesCarrier7, plcNodeNotchesCarrier8,
plcNodePilots, plcNodePilot1, plcNodePilot2,
plcNodeAdaptsStringBand, plcNodeAdaptsCarrier1,
plcNodeAdaptsCarrier2, plcNodeAdaptsCarrier3,
plcNodeAdaptsCarrier4, plcNodeAdaptsCarrier5,
plcNodeAdaptsCarrier6, plcNodeAdaptsCarrier7,
plcNodeAdaptsCarrier8,
plcNodeIpAddr, plcNodeNetMask, plcNodeMacAddr,
plcNodeGateway, plcMasterBssId, plcSlaveBssId,
plcSpyIsDynamic, plcStaticSpySynchBandNb }
STATUS current
DESCRIPTION "A collection of objects providing
node configuration information."
::= { plcGroups 1 }
inputNodeGroup OBJECT-GROUP
OBJECTS { plcNodeNotchesInputBand, plcNodeNotchesInputGroup,
plcNodeNotchesInputCarrier1, plcNodeNotchesInputCarrier2,
plcNodeNotchesInputCarrier3, plcNodeNotchesInputCarrier4,
plcNodeNotchesInputCarrier5, plcNodeNotchesInputCarrier6,
plcNodeNotchesInputCarrier7, plcNodeNotchesInputCarrier8,
plcNodeNotchesInputProceed, plcNodeNotchesInputResult,
plcNodePilotsInputBand,
plcInputNodePilot1, plcInputNodePilot2,
plcNodePilotsInputProceed,plcNodePilotsInputResult,
plcNodeAdaptsInputBand, plcNodeAdaptsInputGroup,
plcNodeAdaptsInputCarrier1, plcNodeAdaptsInputCarrier2,
plcNodeAdaptsInputCarrier3, plcNodeAdaptsInputCarrier4,
plcNodeAdaptsInputCarrier5, plcNodeAdaptsInputCarrier6,
plcNodeAdaptsInputCarrier7, plcNodeAdaptsInputCarrier8,
plcNodeAdaptsInputProceed, plcNodeAdaptsInputResult,
plcNodeActionsCommitProceed, plcNodeActionsCommitResult,
plcNodeActionsResetProceed, plcNodeActionsCarrierFlatProceed}
STATUS current
DESCRIPTION "A collection of objects used to request
node configuration information changes."
::= { plcGroups 2 }
topologyGroup OBJECT-GROUP
OBJECTS { plcBasePortAddress, plcBasePortChannelEstimation,
plcBasePortAttenuation ,
plcChannePilot2, plcChannelPilot1,
plcRxChannelPilots,
plcRxLastChannelPilots,
plcTxChannelPilots,
plcRxChannelModulation,
plcRxLastChannelModulation,
plcTxChannelModulation,
plcModGroup1, plcModGroup10, plcModGroup11,
plcModGroup12, plcModGroup13, plcModGroup14,
plcModGroup15, plcModGroup16, plcModGroup2,
plcModGroup3, plcModGroup4, plcModGroup5,
plcModGroup6, plcModGroup7, plcModGroup8,
plcModGroup9,
plcPortChannelGain,
plcPortChannelBandwidth,
plcPortChannelMaxBandwidth,
plcPortChannelSynchronizationBand,
plcPortChannelType, plcTopoChanges }
STATUS current
DESCRIPTION "A collection of objects providing
topology configuration."
::= { plcGroups 3 }
inputTopologyGroup OBJECT-GROUP
OBJECTS { plcModulationInputAddr, plcModulationInputChannel, plcModulationInputBand,
plcInputModulationGroup1, plcInputModulationGroup2,
plcInputModulationGroup3, plcInputModulationGroup4,
plcInputModulationGroup5, plcInputModulationGroup6,
plcInputModulationGroup7, plcInputModulationGroup8,
plcInputModulationGroup9, plcInputModulationGroup10,
plcInputModulationGroup11, plcInputModulationGroup12,
plcInputModulationGroup13, plcInputModulationGroup14,
plcInputModulationGroup15, plcInputModulationGroup16,
plcModulationInputProceed, plcModulationInputResult,
plcPilotsInputAddr, plcPilotsInputChannel, plcPilotsInputBand,
plcInputChannelPilot1, plcInputChannelPilot2,
plcPilotsInputProceed, plcPilotsInputResult }
STATUS current
DESCRIPTION "A collection of objects used to request
topology configuration changes."
::= { plcGroups 4 }
statisticGroup OBJECT-GROUP
OBJECTS { --PR01 BEGIN
-- ipBridgedPackets, ipInBridgedPkts,
-- ipInErrorPackets, ipInErrorPkts, ipInPackets,
-- ipInPkts, ipOutErrorPackets, ipOutErrorPkts,
-- ipOutPackets, ipOutPkts, macInErrorPkts,
-- macInPkts, macOutErrorPkts, macOutPackets,
-- plcpInErrorPkts, plcpInPkts, plcpOutErrorPkts,
-- plcpOutPkts,
--PR01 END
portStats2AvgBandAtt, portStats2AvgBandSNR, --PR01
-- portStats2Ber,
portStats2Noise, portStats2Signal,
-- portStatsBer,
portStatsNoise, portStatsSignal,
portStats3AvgAtt, portStats3AvgSNR ,
bootstatsBoot, bootstatsManualReset, bootstatsFailureReset
} --PR01
STATUS current
DESCRIPTION "A collection of objects providing
statistic data on node and plc link performances."
::= { plcGroups 5 }
softwareGroup OBJECT-GROUP
OBJECTS { currentSoftwareVersion, currentSoftwareBoardVersion,
currentSoftwareAFEVersion, softwareVersion,
softwareUploadTFTPServerIP, softwareUploadLogin,
softwareUploadPassword, softwareUploadFileName,
softwareUploadProceed, softwareUploadResult,
softwareUploadTFTPServerPort, --PR01
softwareActionIndex, softwareActionType,
softwareActionProceed, softwareActionResult }
STATUS current
DESCRIPTION "A collection of objects providing
software management"
::= { plcGroups 6 }
--PR01 BEGIN
analyserGroup OBJECT-GROUP
OBJECTS { plcSNAnalyserAGC, plcSNAnalyserEnable,
plcSNAnalyserMinSignal, plcSNAnalyserMaxSignal,
plcSNAnalyserAvgSignal, plcSNAnalyserLastSignal,
plcSNAnalyserFFTDiv,
plcAGCAnalyserEnable,
plcAGCAnalyserSamplesPart1, plcAGCAnalyserSamplesPart2 }
STATUS current
DESCRIPTION "A collection of objects providing
spectrum analyser data"
::= { plcGroups 7 }
--PR01 END
agentCapabilities AGENT-CAPABILITIES
PRODUCT-RELEASE "Product-Release"
STATUS current
DESCRIPTION "The SPC200 chip SNMP agent capabilities"
SUPPORTS SPC200
INCLUDES { nodeGroup, inputNodeGroup,
topologyGroup, inputTopologyGroup,
statisticGroup, softwareGroup,
analyserGroup } --PR01
--OK SUPPORTS IF-MIB
--OK INCLUDES { ifGeneralInformationGroup, ifHCPacketGroup }
--OK VARIATION ifAdminStatus
--OK ACCESS read-only
--OK DESCRIPTION "Forbid the update of the administrative status"
--OK VARIATION ifLinkUpDownTrapEnable
--OK ACCESS not-implemented
--OK DESCRIPTION "No trap supported"
--KO VARIATION ifAlias
--KO ACCESS not-implemented
--KO DESCRIPTION "The non volatile alias name
--KO cannot be saved on the SPC200 chip"
--KO VARIATION ifMtu
--KO ACCESS not-implemented
--KO DESCRIPTION "Information not available on SPC200 chip"
SUPPORTS MAU-MIB
INCLUDES { mauIfGrpBasic }
VARIATION ifMauIndex
DESCRIPTION "Only one MAU. So the value is always 1"
VARIATION ifMauMediaAvailable
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ifMauMediaAvailableStateExits
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ifMauJabberState
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ifMauJabberingStateEnters
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
SUPPORTS IP-MIB
INCLUDES { ipGroup }
VARIATION ipForwarding
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipDefaultTTL
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipInHdrErrors
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipInAddrErrors
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipForwDatagrams
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipInUnknownProtos
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipInDiscards
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipInDelivers
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipOutDiscards
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipOutNoRoutes
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipReasmTimeout
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipReasmReqds
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipReasmOKs
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipReasmFails
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipFragOKs
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipFragFails
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipFragCreates
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipAdEntBcastAddr
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipAdEntReasmMaxSize
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
VARIATION ipRoutingDiscards
ACCESS not-implemented
DESCRIPTION "Information not available on SPC200 chip"
SUPPORTS SNMPv2-MIB
INCLUDES { systemGroup }
--OK SUPPORTS BRIDGE-MIB
--OK INCLUDES { dot1dBase }
--KO VARIATION dot1dBasePortDelayExceededDiscards
--KO ACCESS not-implemented
--KO DESCRIPTION "Information not available on SPC200 chip"
--KO VARIATION dot1dBasePortMtuExceededDiscards
--KO ACCESS not-implemented
--KO DESCRIPTION "Information not available on SPC200 chip"
::= { plcConformance 3 }
-- ifTableExt data
--ifTableExt OBJECT-TYPE
-- SYNTAX SEQUENCE OF IfEntryExt
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of interface entries. The number of entries is
-- given by the value of ifNumber. This Table is an Ext of the
-- standard ifTable located in the IF-MIB."
-- ::= { spc200MIB 2 }
--ifEntryExt OBJECT-TYPE
-- SYNTAX IfEntryExt
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "An entry containing management information applicable to a
-- particular interface. These entries are indexed using the ifIndex
-- of the standard IF-MIB."
-- INDEX { ifIndex }
-- ::= { ifTableExt 1 }
--IfEntryExt ::= SEQUENCE {
-- ifDefaultSpeed Gauge32,
-- ifSpeedAutoNegAdminStatus INTEGER }
--ifDefaultSpeed OBJECT-TYPE
-- SYNTAX Gauge32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This field is used to set the speed for a given interface.
-- It contains a default value which will be copied into ifSpeed if
-- the ifSpeedAutoNegAdminStatus is disabled"
-- ::= { ifEntryExt 1 }
--ifSpeedAutoNegAdminStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This field is used to enable/disable the speed auto negotiation
-- process for a given interface. If the status is disabled, the user
-- can set the speed by setting ifDefaultSpeed.
-- When the speed auto negotiation status is enabled, the hardware
-- select a speed and set it in ifSpeed. When the speed auto negotiation
-- status is disabled, the content of ifDefaultSpeed is copied into
-- ifSpeed."
-- ::= { ifEntryExt 2 }
--ifGroupExt OBJECT-GROUP
-- OBJECTS {
-- ifDefaultSpeed,
-- ifSpeedAutoNegAdminStatus }
-- STATUS current
-- DESCRIPTION
-- "The fields needed by the SPiDCOM functionalities"
-- ::= { ifTableExt 2 }
-- ipExt data , for DHCP mode
ipExt OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Extended ip needed for SPiDCOM functionalities"
::= { spc200MIB 4 }
ipDynamic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True if Ip address is set dynamically"
::= { ipExt 1 }
ipExtGroup OBJECT-GROUP
OBJECTS {
ipDynamic
}
STATUS current
DESCRIPTION "The fields needed by the SPiDCOM functionalities"
::= { ipExt 2 }
END
Reference in New Issue View Git Blame Copy Permalink