david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/ciena/CIENA-WS-PTP-MODEM-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

1685 lines
64 KiB
Plaintext
Raw Blame History

-- This file was automatically generated from ciena-ws-ptp-modem.yang. Do not edit.
CIENA-WS-PTP-MODEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
cienaWsConfig
FROM CIENA-WS-MIB
cwsPtpDiagnosticsEntry, cwsPtpTransmitterEntry
FROM CIENA-WS-PTP-MIB
ChannelsNumber, Decimal1Dig, Decimal2Dig, EnabledDisabledEnum, LineSysEnum, ModemChannel, ModemFrequency, OnOffEnum, PtpId, RecoverLinkDispersionType, StringMaxl32, StringSci, TxPowerLvl, WlSpacing
FROM CIENA-WS-TYPEDEFS-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC;
cienaWsPtpModemMIB MODULE-IDENTITY
LAST-UPDATED "201703020000Z"
ORGANIZATION "Ciena Corporation"
CONTACT-INFO "Web URL: http://www.ciena.com/
Postal: 7035 Ridge Road
Hanover, Maryland 21076
U.S.A.
Phone: +1 800-921-1144
Fax: +1 410-694-5750"
DESCRIPTION "This module defines modem-transceiver PTP data for the Waveserver. It augments the ciena-ws-ptp module.
The PTP model is the signal carried by the modem transceiver at a line port. Automatically provisioned at system turn-up."
REVISION "201703020000Z"
DESCRIPTION "Waveserver Release 1.4
Aligned MIB files to respect YANG read/write status."
REVISION "201612120000Z"
DESCRIPTION "Waveserver Rel 1.3 revised.
New container 'fast-rx-recovery' created with new leafs,
Container 'performance-statistics/pre-fec-signal-degrade',
container 'performance-statistics/pre-fec-signal-fail', and
all sub-nodes have been changed to obsolete.
New 'performance-statistics/alarms' container created.
following leafs have been changed to obsolete:
'fast-receiver-recovery-state',
'q-factor average',
'pre-fec-ber/min',
'pre-fec-ber/average',
'post-fec-ber/min',
'post-fec-ber/max',
'post-fec-ber/average'
'laser-centering-range' leaf added.
'colourless-channel-power' renamed to 'colourless-rx-channel.
Added 'power' sub-container for 'colourless-rx-channel. 'power-actual' leaf removed.
New container 'colourless-tx-channel' created with new leafs.
New advanced ptp statistics leafs added to 'performance-statistics' container.
New leaf 'frequency/actual' added."
REVISION "201606140000Z"
DESCRIPTION "Waveserver Rel 1.2 revised.
Major restructuring of this YANG module."
REVISION "201602010000Z"
DESCRIPTION "Waveserver Rel 1.1 revised.
Augmented 'ptp-adv-channel-status' container for when the XCVR type is WaveLogic 3 Extreme. Added new leafs to the augmented container.
Added new pre-FEC related leafs to 'adv-config' augment container.
The tx and rx compensation dispersion related leafs have been re-named to reduce confusion."
REVISION "201504290000Z"
DESCRIPTION "Initial version."
::= { cienaWsConfig 9 }
cwsPtpAugPtpModemTransmitterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpAugPtpModemTransmitterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 3 }
cwsPtpAugPtpModemTransmitterEntry OBJECT-TYPE
SYNTAX CwsPtpAugPtpModemTransmitterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpAugPtpModemTransmitterTable."
AUGMENTS { cwsPtpTransmitterEntry }
::= { cwsPtpAugPtpModemTransmitterTable 1 }
CwsPtpAugPtpModemTransmitterEntry ::= SEQUENCE {
cwsPtpModemTransmitterLineSystemChannelNumber ModemChannel
}
cwsPtpModemTransmitterLineSystemChannelNumber OBJECT-TYPE
SYNTAX ModemChannel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Line System Channel Number. Channel cannot be modified while Admin State is enabled (except when changing from zero value to another value). Channel cannot be provisioned if System Band Plan field is set to None. Channel cannot be modified in the same operation as Wavelength, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Channel is modified, Wavelength and Frequency will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. Software shall automatically update existing channel number provisioning when user changes Band Plan provisioning. Channel number shall be set to 0 if provisioned wavelength/frequency is not found in the new Band Plan or the new Band Plan equals to None. "
::= { cwsPtpAugPtpModemTransmitterEntry 1 }
cwsPtpModemFrequencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemFrequencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 4 }
cwsPtpModemFrequencyEntry OBJECT-TYPE
SYNTAX CwsPtpModemFrequencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemFrequencyTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemFrequencyTableSnmpKey }
::= { cwsPtpModemFrequencyTable 1 }
CwsPtpModemFrequencyEntry ::= SEQUENCE {
cwsPtpModemFrequencyTableSnmpKey Integer32,
cwsPtpModemFrequencyValue ModemFrequency,
cwsPtpModemFrequencyMinValue Decimal1Dig,
cwsPtpModemFrequencyMaxValue Decimal1Dig,
cwsPtpModemFrequencyActual Decimal1Dig
}
cwsPtpModemFrequencyTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemFrequency"
::= { cwsPtpModemFrequencyEntry 1 }
cwsPtpModemFrequencyValue OBJECT-TYPE
SYNTAX ModemFrequency
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Modem Frequency value (GHz). Frequency cannot be modified while Admin State is enabled (except when changing from zero value to another value). Frequency cannot be modified in the same operation as Wavelength, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Frequency is modified, Wavelength and Channel will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. Attempts to change to a value outside of the range will result in failure."
::= { cwsPtpModemFrequencyEntry 2 }
cwsPtpModemFrequencyMinValue OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Min Frequency value, in GHz."
::= { cwsPtpModemFrequencyEntry 3 }
cwsPtpModemFrequencyMaxValue OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Max Frequency value, in GHz."
::= { cwsPtpModemFrequencyEntry 4 }
cwsPtpModemFrequencyActual OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual frequency value of the modem ptp. in GHz. It may or may not be equal to the configurable 'frequency/value'"
::= { cwsPtpModemFrequencyEntry 5 }
cwsPtpModemPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 5 }
cwsPtpModemPowerEntry OBJECT-TYPE
SYNTAX CwsPtpModemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemPowerTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPowerTableSnmpKey }
::= { cwsPtpModemPowerTable 1 }
CwsPtpModemPowerEntry ::= SEQUENCE {
cwsPtpModemPowerTableSnmpKey Integer32,
cwsPtpModemPowerValue TxPowerLvl,
cwsPtpModemPowerMinValue Decimal1Dig,
cwsPtpModemPowerMaxValue Decimal1Dig
}
cwsPtpModemPowerTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemPower"
::= { cwsPtpModemPowerEntry 1 }
cwsPtpModemPowerValue OBJECT-TYPE
SYNTAX TxPowerLvl
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The provisioned transmit power in dBm. The range is from -16.0 (-11.0 for EDFA) to -10.0 (4.0 for EDFA). Default is -10.0"
::= { cwsPtpModemPowerEntry 2 }
cwsPtpModemPowerMinValue OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Min Power Level value, in dBm."
::= { cwsPtpModemPowerEntry 3 }
cwsPtpModemPowerMaxValue OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Max Power Level value, in dBm."
::= { cwsPtpModemPowerEntry 4 }
cwsPtpModemLineSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemLineSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Modem line System related attributes."
::= { cienaWsPtpModemMIB 6 }
cwsPtpModemLineSystemEntry OBJECT-TYPE
SYNTAX CwsPtpModemLineSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemLineSystemTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemLineSystemTableSnmpKey }
::= { cwsPtpModemLineSystemTable 1 }
CwsPtpModemLineSystemEntry ::= SEQUENCE {
cwsPtpModemLineSystemTableSnmpKey Integer32,
cwsPtpModemLineSystemType LineSysEnum,
cwsPtpModemLineSystemWavelengthSpacing WlSpacing
}
cwsPtpModemLineSystemTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemLineSystem"
::= { cwsPtpModemLineSystemEntry 1 }
cwsPtpModemLineSystemType OBJECT-TYPE
SYNTAX LineSysEnum
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Line system type. It can be set as coloured or colorless. Default is coloured"
::= { cwsPtpModemLineSystemEntry 2 }
cwsPtpModemLineSystemWavelengthSpacing OBJECT-TYPE
SYNTAX WlSpacing
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Wavelength Spacing cannot be modified while Admin State is enabled. Wavelength Spacing cannot be modified in the same operation as Wavelength, Frequencey, and Channel, only one of those fields may be modified in a single operation. Wavelength Spacing cannot be provisioned when System Band Plan field is set to a value other than None, Wavelength Space field will also be automatically set to Flex Grid. When PTP Wavelength Spacing is changed from FlexGrid to a fixed grid (e.g. 50GHz), or from a fixed grid to another fixed grid value, if existing Wavelength and Frequency is not valid in the selected grid, their values will be set to zero. When PTP Wavelength Spacing is changed from a fixed grid (e.g. 50GHz) to FlexGrid, existing Wavelength, Frequency and Line System Channel Number remain unchanged."
::= { cwsPtpModemLineSystemEntry 3 }
cwsPtpModemCmdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemCmdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 7 }
cwsPtpModemCmdEntry OBJECT-TYPE
SYNTAX CwsPtpModemCmdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemCmdTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemCmdTableSnmpKey }
::= { cwsPtpModemCmdTable 1 }
CwsPtpModemCmdEntry ::= SEQUENCE {
cwsPtpModemCmdTableSnmpKey Integer32,
cwsPtpModemCmdSlot Unsigned32,
cwsPtpModemCmdPortIn Unsigned32,
cwsPtpModemCmdPortOut Unsigned32
}
cwsPtpModemCmdTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemCmd"
::= { cwsPtpModemCmdEntry 1 }
cwsPtpModemCmdSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "CMD Slot. Cannot be modified currently."
::= { cwsPtpModemCmdEntry 2 }
cwsPtpModemCmdPortIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "CMD Port In. Cannot be modified."
::= { cwsPtpModemCmdEntry 3 }
cwsPtpModemCmdPortOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "CMD Port Out. Cannot be modified."
::= { cwsPtpModemCmdEntry 4 }
cwsPtpModemModemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 8 }
cwsPtpModemModemEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemModemTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemTableSnmpKey }
::= { cwsPtpModemModemTable 1 }
CwsPtpModemModemEntry ::= SEQUENCE {
cwsPtpModemModemTableSnmpKey Integer32,
cwsPtpModemModemChannelContentionDetectionAvoidance OnOffEnum,
cwsPtpModemModemPerformanceOptimizationMode INTEGER,
cwsPtpModemModemCarrierCenteringMode INTEGER,
cwsPtpModemModemInterleaverMode INTEGER,
cwsPtpModemModemRotation OnOffEnum,
cwsPtpModemModemSpectralOccupancyMode INTEGER,
cwsPtpModemModemTxPowerReductionState EnabledDisabledEnum,
cwsPtpModemModemTxReductionMode INTEGER,
cwsPtpModemModemTxTuningMode INTEGER,
cwsPtpModemModemDifferentialEncoding INTEGER,
cwsPtpModemModemTxCompensationDispersionMode INTEGER,
cwsPtpModemModemTxCompensationDispersionValue Decimal1Dig,
cwsPtpModemModemFastReceiverRecoveryState EnabledDisabledEnum,
cwsPtpModemModemLaserCenteringRange Decimal1Dig
}
cwsPtpModemModemTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModem"
::= { cwsPtpModemModemEntry 1 }
cwsPtpModemModemChannelContentionDetectionAvoidance OBJECT-TYPE
SYNTAX OnOffEnum
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Turns the channel contention detection and avoidance feature on or off. This feature is used to detect the situation where the modem port turn on a wavelength (or frequency in Gridless mode) that is in use by an existing L0 connection on a colorless network. This feature will be triggered by new wavelength/frequency provisioning and will automatically detects if the provisioned wavelength/frequency is already used. If the provisioned wavelength/frequency is already used, it declares channel contention, and then it will hold the Line port TX in a low power state (<-35 dBm) and will raise a Channel Contention alarm. This feature will also provide a mechanism to allow user to manually release the Line port TX from being held in a low power state while the channel collision declared."
::= { cwsPtpModemModemEntry 2 }
cwsPtpModemModemPerformanceOptimizationMode OBJECT-TYPE
SYNTAX INTEGER { reach(0), latency(1), fasttracking(2), improvedtracking(3), mode5(4), mode6(5), mode7(6), mode8(7), mode9(8), mode10(9), mode11(10), mode12(11), mode13(12), mode14(13) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Performance Optimization. It optimizes for either reach or latency. Default is reach."
::= { cwsPtpModemModemEntry 3 }
cwsPtpModemModemCarrierCenteringMode OBJECT-TYPE
SYNTAX INTEGER { mode1(0), mode2(1), mode3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to configure which Carrier centering mode to apply to the OTM signal. Default is mode-2."
::= { cwsPtpModemModemEntry 4 }
cwsPtpModemModemInterleaverMode OBJECT-TYPE
SYNTAX INTEGER { none(0), standard(1), enhanced(2), auto(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Interleaver Mode. It can be set as standard or enhanced. Default is enhanced."
::= { cwsPtpModemModemEntry 5 }
cwsPtpModemModemRotation OBJECT-TYPE
SYNTAX OnOffEnum
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable (on) or disable (off) Jones's rotation. Default is off"
::= { cwsPtpModemModemEntry 6 }
cwsPtpModemModemSpectralOccupancyMode OBJECT-TYPE
SYNTAX INTEGER { narrow(0), wide(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Spectral Occupancy Mode. This is the optical channel spectral Occupancy parameter which supports two different kinds of waveforms: narrow and wide. Default is narrow. Narrow: Root-Raised Cosine with Alpha of 0.14. Wide: Root-Raised Cosine 0.14 convolved with Gaussian 25GHz full-width half maximum (FWHM)."
::= { cwsPtpModemModemEntry 7 }
cwsPtpModemModemTxPowerReductionState OBJECT-TYPE
SYNTAX EnabledDisabledEnum
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to enable TX blanking functionality. Default is Off"
::= { cwsPtpModemModemEntry 8 }
cwsPtpModemModemTxReductionMode OBJECT-TYPE
SYNTAX INTEGER { positive(0), negative(1), auto(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Transmit XPM reduction. It can be set as Positive, Negative or Auto. This should always be enabled (Positive). Disabling this should be done for only interworking purposes."
::= { cwsPtpModemModemEntry 9 }
cwsPtpModemModemTxTuningMode OBJECT-TYPE
SYNTAX INTEGER { performanceoptimized(0), accelerated(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the Tuning Mode, which can be set as performance-optimized (normal) or accelerated tuning mode. Default is performance-optimized"
::= { cwsPtpModemModemEntry 10 }
cwsPtpModemModemDifferentialEncoding OBJECT-TYPE
SYNTAX INTEGER { none(0), hard(1), soft(2), xd(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to configure which differential encoding mode to apply to the OTM signal. It can be set as None, Hard, Soft, Xd. Default is none."
::= { cwsPtpModemModemEntry 11 }
cwsPtpModemModemTxCompensationDispersionMode OBJECT-TYPE
SYNTAX INTEGER { manual(0), automatic(1), custom1(2), off(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Tx Compensation Dispersion Mode. Default is Off."
::= { cwsPtpModemModemEntry 12 }
cwsPtpModemModemTxCompensationDispersionValue OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Tx compensation dispersion value range from -40000 ps/nm to 85000 ps/nm. Default is 0"
::= { cwsPtpModemModemEntry 13 }
cwsPtpModemModemFastReceiverRecoveryState OBJECT-TYPE
SYNTAX EnabledDisabledEnum
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Whether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values.
This leaf is now obsolete in WS 1.3"
::= { cwsPtpModemModemEntry 14 }
cwsPtpModemModemLaserCenteringRange OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to configure the laser centering range."
::= { cwsPtpModemModemEntry 15 }
cwsPtpModemPerformanceStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemPerformanceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 9 }
cwsPtpModemPerformanceStatisticsEntry OBJECT-TYPE
SYNTAX CwsPtpModemPerformanceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemPerformanceStatisticsTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPerformanceStatisticsTableSnmpKey }
::= { cwsPtpModemPerformanceStatisticsTable 1 }
CwsPtpModemPerformanceStatisticsEntry ::= SEQUENCE {
cwsPtpModemPerformanceStatisticsTableSnmpKey Integer32,
cwsPtpModemPerformanceStatisticsSecondsSinceLastClear Unsigned32,
cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCount Unsigned32,
cwsPtpModemPerformanceStatisticsHighCorrectionCountSeconds Unsigned32
}
cwsPtpModemPerformanceStatisticsTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemPerformanceStatistics"
::= { cwsPtpModemPerformanceStatisticsEntry 1 }
cwsPtpModemPerformanceStatisticsSecondsSinceLastClear OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of seconds since last statistics clear."
::= { cwsPtpModemPerformanceStatisticsEntry 2 }
cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Uncorrected FEC block count."
::= { cwsPtpModemPerformanceStatisticsEntry 3 }
cwsPtpModemPerformanceStatisticsHighCorrectionCountSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High correction count seconds."
::= { cwsPtpModemPerformanceStatisticsEntry 4 }
cwsPtpModemPreFecBerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemPreFecBerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 10 }
cwsPtpModemPreFecBerEntry OBJECT-TYPE
SYNTAX CwsPtpModemPreFecBerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemPreFecBerTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPreFecBerTableSnmpKey }
::= { cwsPtpModemPreFecBerTable 1 }
CwsPtpModemPreFecBerEntry ::= SEQUENCE {
cwsPtpModemPreFecBerTableSnmpKey Integer32,
cwsPtpModemPreFecBerActual StringSci,
cwsPtpModemPreFecBerMax StringSci,
cwsPtpModemPreFecBerMin StringSci,
cwsPtpModemPreFecBerAverage StringSci
}
cwsPtpModemPreFecBerTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemPreFecBer"
::= { cwsPtpModemPreFecBerEntry 1 }
cwsPtpModemPreFecBerActual OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Pre-FEC BER Actual Value, in scientific notation format. If the Port is down or invalid, this field will not be present."
::= { cwsPtpModemPreFecBerEntry 2 }
cwsPtpModemPreFecBerMax OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max Pre-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present."
::= { cwsPtpModemPreFecBerEntry 3 }
cwsPtpModemPreFecBerMin OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Min Pre-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
::= { cwsPtpModemPreFecBerEntry 4 }
cwsPtpModemPreFecBerAverage OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Average Pre-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
::= { cwsPtpModemPreFecBerEntry 5 }
cwsPtpModemPostFecBerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemPostFecBerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 11 }
cwsPtpModemPostFecBerEntry OBJECT-TYPE
SYNTAX CwsPtpModemPostFecBerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemPostFecBerTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPostFecBerTableSnmpKey }
::= { cwsPtpModemPostFecBerTable 1 }
CwsPtpModemPostFecBerEntry ::= SEQUENCE {
cwsPtpModemPostFecBerTableSnmpKey Integer32,
cwsPtpModemPostFecBerActual StringSci,
cwsPtpModemPostFecBerMax StringSci,
cwsPtpModemPostFecBerMin StringSci,
cwsPtpModemPostFecBerAverage StringSci
}
cwsPtpModemPostFecBerTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemPostFecBer"
::= { cwsPtpModemPostFecBerEntry 1 }
cwsPtpModemPostFecBerActual OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Post-FEC BER Actual value, in scientific notation format. If the Port is down or invalid, this field will not be present."
::= { cwsPtpModemPostFecBerEntry 2 }
cwsPtpModemPostFecBerMax OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Max Post-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
::= { cwsPtpModemPostFecBerEntry 3 }
cwsPtpModemPostFecBerMin OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Min Post-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
::= { cwsPtpModemPostFecBerEntry 4 }
cwsPtpModemPostFecBerAverage OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Average Post-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
::= { cwsPtpModemPostFecBerEntry 5 }
cwsPtpModemQFactorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemQFactorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 12 }
cwsPtpModemQFactorEntry OBJECT-TYPE
SYNTAX CwsPtpModemQFactorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemQFactorTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemQFactorTableSnmpKey }
::= { cwsPtpModemQFactorTable 1 }
CwsPtpModemQFactorEntry ::= SEQUENCE {
cwsPtpModemQFactorTableSnmpKey Integer32,
cwsPtpModemQFactorActual Decimal2Dig,
cwsPtpModemQFactorMax Decimal2Dig,
cwsPtpModemQFactorMin Decimal2Dig,
cwsPtpModemQFactorAverage Decimal2Dig
}
cwsPtpModemQFactorTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemQFactor"
::= { cwsPtpModemQFactorEntry 1 }
cwsPtpModemQFactorActual OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Q-factor actual value. If this value is invalid, this field will not be present."
::= { cwsPtpModemQFactorEntry 2 }
cwsPtpModemQFactorMax OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max Q-factor value. If this value is invalid, this field will not be present."
::= { cwsPtpModemQFactorEntry 3 }
cwsPtpModemQFactorMin OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Min Q-factor value. If this value is invalid, this field will not be present."
::= { cwsPtpModemQFactorEntry 4 }
cwsPtpModemQFactorAverage OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Average Q-factor value. If this value is invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
::= { cwsPtpModemQFactorEntry 5 }
cwsPtpModemFecFrameErrorCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemFecFrameErrorCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 13 }
cwsPtpModemFecFrameErrorCountEntry OBJECT-TYPE
SYNTAX CwsPtpModemFecFrameErrorCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemFecFrameErrorCountTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemFecFrameErrorCountTableSnmpKey }
::= { cwsPtpModemFecFrameErrorCountTable 1 }
CwsPtpModemFecFrameErrorCountEntry ::= SEQUENCE {
cwsPtpModemFecFrameErrorCountTableSnmpKey Integer32,
cwsPtpModemFecFrameErrorCountValue Unsigned32,
cwsPtpModemFecFrameErrorCountSeconds Unsigned32
}
cwsPtpModemFecFrameErrorCountTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemFecFrameErrorCount"
::= { cwsPtpModemFecFrameErrorCountEntry 1 }
cwsPtpModemFecFrameErrorCountValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FEC Frame Error Count Value."
::= { cwsPtpModemFecFrameErrorCountEntry 2 }
cwsPtpModemFecFrameErrorCountSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FEC Frame Error Count Seconds."
::= { cwsPtpModemFecFrameErrorCountEntry 3 }
cwsPtpModemModemprefecsignalfailalarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignalfailalarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 14 }
cwsPtpModemModemprefecsignalfailalarmEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemprefecsignalfailalarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemModemprefecsignalfailalarmTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignalfailalarmTableSnmpKey }
::= { cwsPtpModemModemprefecsignalfailalarmTable 1 }
CwsPtpModemModemprefecsignalfailalarmEntry ::= SEQUENCE {
cwsPtpModemModemprefecsignalfailalarmTableSnmpKey Integer32,
cwsPtpModemModemprefecsignalfailalarmActive TruthValue
}
cwsPtpModemModemprefecsignalfailalarmTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModemprefecsignalfailalarm"
::= { cwsPtpModemModemprefecsignalfailalarmEntry 1 }
cwsPtpModemModemprefecsignalfailalarmActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If OTU4 Pre-FEC Signal Fail alarm has been raised."
::= { cwsPtpModemModemprefecsignalfailalarmEntry 2 }
cwsPtpModemModemprefecsignalfailalarmthresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignalfailalarmthresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 15 }
cwsPtpModemModemprefecsignalfailalarmthresholdEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemprefecsignalfailalarmthresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemModemprefecsignalfailalarmthresholdTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKey }
::= { cwsPtpModemModemprefecsignalfailalarmthresholdTable 1 }
CwsPtpModemModemprefecsignalfailalarmthresholdEntry ::= SEQUENCE {
cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKey Integer32,
cwsPtpModemModemprefecsignalfailalarmthresholdDbq Decimal2Dig
}
cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModemprefecsignalfailalarmthreshold"
::= { cwsPtpModemModemprefecsignalfailalarmthresholdEntry 1 }
cwsPtpModemModemprefecsignalfailalarmthresholdDbq OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Pre-FEC Signal Fail Threshold, in dBQ."
::= { cwsPtpModemModemprefecsignalfailalarmthresholdEntry 2 }
cwsPtpModemModemprefecsignaldegradealarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignaldegradealarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 16 }
cwsPtpModemModemprefecsignaldegradealarmEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemprefecsignaldegradealarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemModemprefecsignaldegradealarmTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignaldegradealarmTableSnmpKey }
::= { cwsPtpModemModemprefecsignaldegradealarmTable 1 }
CwsPtpModemModemprefecsignaldegradealarmEntry ::= SEQUENCE {
cwsPtpModemModemprefecsignaldegradealarmTableSnmpKey Integer32,
cwsPtpModemModemprefecsignaldegradealarmActive TruthValue
}
cwsPtpModemModemprefecsignaldegradealarmTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModemprefecsignaldegradealarm"
::= { cwsPtpModemModemprefecsignaldegradealarmEntry 1 }
cwsPtpModemModemprefecsignaldegradealarmActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If OTU4 Pre-FEC Signal Degrade alarm has been raised."
::= { cwsPtpModemModemprefecsignaldegradealarmEntry 2 }
cwsPtpModemModemprefecsignaldegradealarmthresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignaldegradealarmthresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 17 }
cwsPtpModemModemprefecsignaldegradealarmthresholdEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemprefecsignaldegradealarmthresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemModemprefecsignaldegradealarmthresholdTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKey }
::= { cwsPtpModemModemprefecsignaldegradealarmthresholdTable 1 }
CwsPtpModemModemprefecsignaldegradealarmthresholdEntry ::= SEQUENCE {
cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKey Integer32,
cwsPtpModemModemprefecsignaldegradealarmthresholdDbq Decimal2Dig
}
cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModemprefecsignaldegradealarmthreshold"
::= { cwsPtpModemModemprefecsignaldegradealarmthresholdEntry 1 }
cwsPtpModemModemprefecsignaldegradealarmthresholdDbq OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Pre-FEC Signal Degrade Threshold, in dBQ."
::= { cwsPtpModemModemprefecsignaldegradealarmthresholdEntry 2 }
cwsPtpModemPreFecSignalFailTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemPreFecSignalFailEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 18 }
cwsPtpModemPreFecSignalFailEntry OBJECT-TYPE
SYNTAX CwsPtpModemPreFecSignalFailEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Entry for cwsPtpModemPreFecSignalFailTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPreFecSignalFailTableSnmpKey }
::= { cwsPtpModemPreFecSignalFailTable 1 }
CwsPtpModemPreFecSignalFailEntry ::= SEQUENCE {
cwsPtpModemPreFecSignalFailTableSnmpKey Integer32,
cwsPtpModemPreFecSignalFailFailStatus TruthValue
}
cwsPtpModemPreFecSignalFailTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemPreFecSignalFail"
::= { cwsPtpModemPreFecSignalFailEntry 1 }
cwsPtpModemPreFecSignalFailFailStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If OTU4 Pre-FEC Signal Fail has been raised."
::= { cwsPtpModemPreFecSignalFailEntry 2 }
cwsPtpModemModemprefecsignalfailthresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignalfailthresholdEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 19 }
cwsPtpModemModemprefecsignalfailthresholdEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemprefecsignalfailthresholdEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Entry for cwsPtpModemModemprefecsignalfailthresholdTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignalfailthresholdTableSnmpKey }
::= { cwsPtpModemModemprefecsignalfailthresholdTable 1 }
CwsPtpModemModemprefecsignalfailthresholdEntry ::= SEQUENCE {
cwsPtpModemModemprefecsignalfailthresholdTableSnmpKey Integer32,
cwsPtpModemModemprefecsignalfailthresholdDbq Decimal2Dig,
cwsPtpModemModemprefecsignalfailthresholdBer StringSci
}
cwsPtpModemModemprefecsignalfailthresholdTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModemprefecsignalfailthreshold"
::= { cwsPtpModemModemprefecsignalfailthresholdEntry 1 }
cwsPtpModemModemprefecsignalfailthresholdDbq OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION "Pre-FEC Signal Fail Threshold, in dBQ."
::= { cwsPtpModemModemprefecsignalfailthresholdEntry 2 }
cwsPtpModemModemprefecsignalfailthresholdBer OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION "Pre-FEC Signal Fail Threshold BER, in scientific notation format. If the Port is down or invalid, this field will not be present."
::= { cwsPtpModemModemprefecsignalfailthresholdEntry 3 }
cwsPtpModemPreFecSignalDegradeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemPreFecSignalDegradeEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 20 }
cwsPtpModemPreFecSignalDegradeEntry OBJECT-TYPE
SYNTAX CwsPtpModemPreFecSignalDegradeEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Entry for cwsPtpModemPreFecSignalDegradeTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPreFecSignalDegradeTableSnmpKey }
::= { cwsPtpModemPreFecSignalDegradeTable 1 }
CwsPtpModemPreFecSignalDegradeEntry ::= SEQUENCE {
cwsPtpModemPreFecSignalDegradeTableSnmpKey Integer32,
cwsPtpModemPreFecSignalDegradeDegradeStatus TruthValue
}
cwsPtpModemPreFecSignalDegradeTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemPreFecSignalDegrade"
::= { cwsPtpModemPreFecSignalDegradeEntry 1 }
cwsPtpModemPreFecSignalDegradeDegradeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If OTU4 Pre-FEC Signal Degrade has been raised."
::= { cwsPtpModemPreFecSignalDegradeEntry 2 }
cwsPtpModemModemprefecsignaldegradethresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignaldegradethresholdEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 21 }
cwsPtpModemModemprefecsignaldegradethresholdEntry OBJECT-TYPE
SYNTAX CwsPtpModemModemprefecsignaldegradethresholdEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Entry for cwsPtpModemModemprefecsignaldegradethresholdTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKey }
::= { cwsPtpModemModemprefecsignaldegradethresholdTable 1 }
CwsPtpModemModemprefecsignaldegradethresholdEntry ::= SEQUENCE {
cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKey Integer32,
cwsPtpModemModemprefecsignaldegradethresholdDbq Decimal2Dig,
cwsPtpModemModemprefecsignaldegradethresholdBer StringSci
}
cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemModemprefecsignaldegradethreshold"
::= { cwsPtpModemModemprefecsignaldegradethresholdEntry 1 }
cwsPtpModemModemprefecsignaldegradethresholdDbq OBJECT-TYPE
SYNTAX Decimal2Dig
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION "Pre-FEC Signal Degrade Threshold, in dBQ."
::= { cwsPtpModemModemprefecsignaldegradethresholdEntry 2 }
cwsPtpModemModemprefecsignaldegradethresholdBer OBJECT-TYPE
SYNTAX StringSci
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION "Pre-FEC Signal Degrade Threshold BER, in scientific notation format. If the Port is down or invalid, this field will not be present."
::= { cwsPtpModemModemprefecsignaldegradethresholdEntry 3 }
cwsPtpModemRxlinkdispersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemRxlinkdispersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 22 }
cwsPtpModemRxlinkdispersionEntry OBJECT-TYPE
SYNTAX CwsPtpModemRxlinkdispersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemRxlinkdispersionTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemRxlinkdispersionTableSnmpKey }
::= { cwsPtpModemRxlinkdispersionTable 1 }
CwsPtpModemRxlinkdispersionEntry ::= SEQUENCE {
cwsPtpModemRxlinkdispersionTableSnmpKey Integer32,
cwsPtpModemRxlinkdispersionTotal Integer32,
cwsPtpModemRxlinkdispersionCompensation Integer32
}
cwsPtpModemRxlinkdispersionTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemRxlinkdispersion"
::= { cwsPtpModemRxlinkdispersionEntry 1 }
cwsPtpModemRxlinkdispersionTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total Rx Link Dispersion, unit is ps/nm."
::= { cwsPtpModemRxlinkdispersionEntry 2 }
cwsPtpModemRxlinkdispersionCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rx Compensation Dispersion, unit is ps/nm."
::= { cwsPtpModemRxlinkdispersionEntry 3 }
cwsPtpModemTxlinkdispersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemTxlinkdispersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 23 }
cwsPtpModemTxlinkdispersionEntry OBJECT-TYPE
SYNTAX CwsPtpModemTxlinkdispersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemTxlinkdispersionTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemTxlinkdispersionTableSnmpKey }
::= { cwsPtpModemTxlinkdispersionTable 1 }
CwsPtpModemTxlinkdispersionEntry ::= SEQUENCE {
cwsPtpModemTxlinkdispersionTableSnmpKey Integer32,
cwsPtpModemTxlinkdispersionTotal Integer32,
cwsPtpModemTxlinkdispersionActual Integer32
}
cwsPtpModemTxlinkdispersionTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemTxlinkdispersion"
::= { cwsPtpModemTxlinkdispersionEntry 1 }
cwsPtpModemTxlinkdispersionTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total Tx Link Dispersion, unit is ps/nm."
::= { cwsPtpModemTxlinkdispersionEntry 2 }
cwsPtpModemTxlinkdispersionActual OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tx Actual Link Dispersion, unit is ps/nm."
::= { cwsPtpModemTxlinkdispersionEntry 3 }
cwsPtpModemDifferentialGroupDelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemDifferentialGroupDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 24 }
cwsPtpModemDifferentialGroupDelayEntry OBJECT-TYPE
SYNTAX CwsPtpModemDifferentialGroupDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemDifferentialGroupDelayTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemDifferentialGroupDelayTableSnmpKey }
::= { cwsPtpModemDifferentialGroupDelayTable 1 }
CwsPtpModemDifferentialGroupDelayEntry ::= SEQUENCE {
cwsPtpModemDifferentialGroupDelayTableSnmpKey Integer32,
cwsPtpModemDifferentialGroupDelayMeanSupported Integer32,
cwsPtpModemDifferentialGroupDelayEstimatedInstance Integer32
}
cwsPtpModemDifferentialGroupDelayTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemDifferentialGroupDelay"
::= { cwsPtpModemDifferentialGroupDelayEntry 1 }
cwsPtpModemDifferentialGroupDelayMeanSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mean Supported Differential Group Delay, unit is ps."
::= { cwsPtpModemDifferentialGroupDelayEntry 2 }
cwsPtpModemDifferentialGroupDelayEstimatedInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Estimated Instance of Differential Group Delay, unit is ps."
::= { cwsPtpModemDifferentialGroupDelayEntry 3 }
cwsPtpModemFastRxRecoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemFastRxRecoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Fast receiver recovery related leafs and attributes."
::= { cienaWsPtpModemMIB 25 }
cwsPtpModemFastRxRecoveryEntry OBJECT-TYPE
SYNTAX CwsPtpModemFastRxRecoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemFastRxRecoveryTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemFastRxRecoveryTableSnmpKey }
::= { cwsPtpModemFastRxRecoveryTable 1 }
CwsPtpModemFastRxRecoveryEntry ::= SEQUENCE {
cwsPtpModemFastRxRecoveryTableSnmpKey Integer32,
cwsPtpModemFastRxRecoveryState EnabledDisabledEnum,
cwsPtpModemFastRxRecoveryNetworkConfiguration INTEGER,
cwsPtpModemFastRxRecoveryPath1Dispersion RecoverLinkDispersionType,
cwsPtpModemFastRxRecoveryPath2Dispersion RecoverLinkDispersionType
}
cwsPtpModemFastRxRecoveryTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemFastRxRecovery"
::= { cwsPtpModemFastRxRecoveryEntry 1 }
cwsPtpModemFastRxRecoveryState OBJECT-TYPE
SYNTAX EnabledDisabledEnum
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values."
::= { cwsPtpModemFastRxRecoveryEntry 2 }
cwsPtpModemFastRxRecoveryNetworkConfiguration OBJECT-TYPE
SYNTAX INTEGER { matched(0), diverse(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fast receiver recovery network configuration value."
::= { cwsPtpModemFastRxRecoveryEntry 3 }
cwsPtpModemFastRxRecoveryPath1Dispersion OBJECT-TYPE
SYNTAX RecoverLinkDispersionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fast receiver recovery network path 1 dispersion value. The value must be between -80000 and +80000."
::= { cwsPtpModemFastRxRecoveryEntry 4 }
cwsPtpModemFastRxRecoveryPath2Dispersion OBJECT-TYPE
SYNTAX RecoverLinkDispersionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fast receiver recovery network path 2 dispersion value. The value must be between -80000 and +80000."
::= { cwsPtpModemFastRxRecoveryEntry 5 }
cwsPtpModemColourlessRxChannelPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemColourlessRxChannelPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Colourless Rx Channel optical power related attributes."
::= { cienaWsPtpModemMIB 26 }
cwsPtpModemColourlessRxChannelPowerEntry OBJECT-TYPE
SYNTAX CwsPtpModemColourlessRxChannelPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemColourlessRxChannelPowerTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpChannelChannelNumber, cwsPtpModemColourlessRxChannelPowerTableSnmpKey }
::= { cwsPtpModemColourlessRxChannelPowerTable 1 }
CwsPtpModemColourlessRxChannelPowerEntry ::= SEQUENCE {
cwsPtpModemColourlessRxChannelPowerTableSnmpKey Integer32,
cwsXcvrColourlessRxChannelPowerActual Decimal1Dig,
cwsXcvrColourlessRxChannelPowerMaximum Decimal1Dig,
cwsXcvrColourlessRxChannelPowerMinimum Decimal1Dig,
cwsXcvrColourlessRxChannelPowerMaximumRecordedTime StringMaxl32,
cwsXcvrColourlessRxChannelPowerMinimumRecordedTime StringMaxl32
}
cwsPtpModemColourlessRxChannelPowerTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemColourlessRxChannelPower"
::= { cwsPtpModemColourlessRxChannelPowerEntry 1 }
cwsXcvrColourlessRxChannelPowerActual OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual Tx or Rx optical power in dBm."
::= { cwsPtpModemColourlessRxChannelPowerEntry 2 }
cwsXcvrColourlessRxChannelPowerMaximum OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum Tx or Rx optical power in dBm."
::= { cwsPtpModemColourlessRxChannelPowerEntry 3 }
cwsXcvrColourlessRxChannelPowerMinimum OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum Tx or Rx optical power in dBm."
::= { cwsPtpModemColourlessRxChannelPowerEntry 4 }
cwsXcvrColourlessRxChannelPowerMaximumRecordedTime OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string."
::= { cwsPtpModemColourlessRxChannelPowerEntry 5 }
cwsXcvrColourlessRxChannelPowerMinimumRecordedTime OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string."
::= { cwsPtpModemColourlessRxChannelPowerEntry 6 }
cwsPtpModemColourlessRxChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemColourlessRxChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 27 }
cwsPtpModemColourlessRxChannelStatusEntry OBJECT-TYPE
SYNTAX CwsPtpModemColourlessRxChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemColourlessRxChannelStatusTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpChannelChannelNumber, cwsPtpModemColourlessRxChannelStatusTableSnmpKey }
::= { cwsPtpModemColourlessRxChannelStatusTable 1 }
CwsPtpModemColourlessRxChannelStatusEntry ::= SEQUENCE {
cwsPtpModemColourlessRxChannelStatusTableSnmpKey Integer32,
cwsPtpModemColourlessRxChannelStatusLossOfSignal TruthValue,
cwsPtpModemColourlessRxChannelStatusHighAlarmStatus TruthValue,
cwsPtpModemColourlessRxChannelStatusLowAlarmStatus TruthValue
}
cwsPtpModemColourlessRxChannelStatusTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemColourlessRxChannelStatus"
::= { cwsPtpModemColourlessRxChannelStatusEntry 1 }
cwsPtpModemColourlessRxChannelStatusLossOfSignal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Colourless Rx power Loss of Signal."
::= { cwsPtpModemColourlessRxChannelStatusEntry 2 }
cwsPtpModemColourlessRxChannelStatusHighAlarmStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Colourless Rx power high alarm status, boolean, true if alarm is raised, false if alarm is not raised."
::= { cwsPtpModemColourlessRxChannelStatusEntry 3 }
cwsPtpModemColourlessRxChannelStatusLowAlarmStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Colourless Rx power low alarm status, boolean, true if alarm is raised, false if alarm is not raised."
::= { cwsPtpModemColourlessRxChannelStatusEntry 4 }
cwsPtpModemColourlessTxChannelPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemColourlessTxChannelPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Colourless Tx Channel optical power related attributes."
::= { cienaWsPtpModemMIB 28 }
cwsPtpModemColourlessTxChannelPowerEntry OBJECT-TYPE
SYNTAX CwsPtpModemColourlessTxChannelPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemColourlessTxChannelPowerTable."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpChannelChannelNumber, cwsPtpModemColourlessTxChannelPowerTableSnmpKey }
::= { cwsPtpModemColourlessTxChannelPowerTable 1 }
CwsPtpModemColourlessTxChannelPowerEntry ::= SEQUENCE {
cwsPtpModemColourlessTxChannelPowerTableSnmpKey Integer32,
cwsXcvrColourlessTxChannelPowerActual Decimal1Dig,
cwsXcvrColourlessTxChannelPowerMaximum Decimal1Dig,
cwsXcvrColourlessTxChannelPowerMinimum Decimal1Dig,
cwsXcvrColourlessTxChannelPowerMaximumRecordedTime StringMaxl32,
cwsXcvrColourlessTxChannelPowerMinimumRecordedTime StringMaxl32
}
cwsPtpModemColourlessTxChannelPowerTableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemColourlessTxChannelPower"
::= { cwsPtpModemColourlessTxChannelPowerEntry 1 }
cwsXcvrColourlessTxChannelPowerActual OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual Tx or Rx optical power in dBm."
::= { cwsPtpModemColourlessTxChannelPowerEntry 2 }
cwsXcvrColourlessTxChannelPowerMaximum OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum Tx or Rx optical power in dBm."
::= { cwsPtpModemColourlessTxChannelPowerEntry 3 }
cwsXcvrColourlessTxChannelPowerMinimum OBJECT-TYPE
SYNTAX Decimal1Dig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum Tx or Rx optical power in dBm."
::= { cwsPtpModemColourlessTxChannelPowerEntry 4 }
cwsXcvrColourlessTxChannelPowerMaximumRecordedTime OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string."
::= { cwsPtpModemColourlessTxChannelPowerEntry 5 }
cwsXcvrColourlessTxChannelPowerMinimumRecordedTime OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string."
::= { cwsPtpModemColourlessTxChannelPowerEntry 6 }
cwsPtpAugPtpModemDiagnosticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpAugPtpModemDiagnosticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 29 }
cwsPtpAugPtpModemDiagnosticsEntry OBJECT-TYPE
SYNTAX CwsPtpAugPtpModemDiagnosticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpAugPtpModemDiagnosticsTable."
AUGMENTS { cwsPtpDiagnosticsEntry }
::= { cwsPtpAugPtpModemDiagnosticsTable 1 }
CwsPtpAugPtpModemDiagnosticsEntry ::= SEQUENCE {
cwsPtpModemDiagnosticsNumberOfOdu Unsigned32
}
cwsPtpModemDiagnosticsNumberOfOdu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of ODUs present."
::= { cwsPtpAugPtpModemDiagnosticsEntry 1 }
cwsPtpModemOtu4Table OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemOtu4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 30 }
cwsPtpModemOtu4Entry OBJECT-TYPE
SYNTAX CwsPtpModemOtu4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemOtu4Table."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemOtu4TableSnmpKey }
::= { cwsPtpModemOtu4Table 1 }
CwsPtpModemOtu4Entry ::= SEQUENCE {
cwsPtpModemOtu4TableSnmpKey Integer32,
cwsPtpModemOtu4LossOfClock TruthValue,
cwsPtpModemOtu4FrequencyOutOfRange TruthValue,
cwsPtpModemOtu4LossOfFrame TruthValue,
cwsPtpModemOtu4LossOfMultiFrame TruthValue,
cwsPtpModemOtu4BackwardDefectIndication TruthValue,
cwsPtpModemOtu4TrailTraceIdMismatch TruthValue
}
cwsPtpModemOtu4TableSnmpKey OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique key for cwsPtpModemOtu4"
::= { cwsPtpModemOtu4Entry 1 }
cwsPtpModemOtu4LossOfClock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU4 Loss of Clock."
::= { cwsPtpModemOtu4Entry 2 }
cwsPtpModemOtu4FrequencyOutOfRange OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU4 Frequency Out Of Range."
::= { cwsPtpModemOtu4Entry 3 }
cwsPtpModemOtu4LossOfFrame OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU4 Loss of Frame."
::= { cwsPtpModemOtu4Entry 4 }
cwsPtpModemOtu4LossOfMultiFrame OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU4 Loss of Multi-Frame."
::= { cwsPtpModemOtu4Entry 5 }
cwsPtpModemOtu4BackwardDefectIndication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU4 Backward Defect Indication."
::= { cwsPtpModemOtu4Entry 6 }
cwsPtpModemOtu4TrailTraceIdMismatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU4 Trail Trace Identifier Mismatch."
::= { cwsPtpModemOtu4Entry 7 }
cwsPtpModemOdu4Table OBJECT-TYPE
SYNTAX SEQUENCE OF CwsPtpModemOdu4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "None"
::= { cienaWsPtpModemMIB 31 }
cwsPtpModemOdu4Entry OBJECT-TYPE
SYNTAX CwsPtpModemOdu4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsPtpModemOdu4Table."
INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemOdu4OduId }
::= { cwsPtpModemOdu4Table 1 }
CwsPtpModemOdu4Entry ::= SEQUENCE {
cwsPtpModemOdu4OduId Integer32,
cwsPtpModemOdu4OpenConnectionIndication TruthValue,
cwsPtpModemOdu4AlarmIndicationSignal TruthValue,
cwsPtpModemOdu4Locked TruthValue,
cwsPtpModemOdu4SignalFail TruthValue,
cwsPtpModemOdu4SignalDegrade TruthValue,
cwsPtpModemOdu4TrailTraceIdMismatch TruthValue,
cwsPtpModemOdu4BackwardDefectIndication TruthValue,
cwsPtpModemOdu4PayloadLabelMismatch TruthValue,
cwsPtpModemOdu4ClientSignalFailure TruthValue
}
cwsPtpModemOdu4OduId OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ODU id, can be ODU4.1 or ODU4.2."
::= { cwsPtpModemOdu4Entry 1 }
cwsPtpModemOdu4OpenConnectionIndication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Open Connection Indication (OCI)."
::= { cwsPtpModemOdu4Entry 2 }
cwsPtpModemOdu4AlarmIndicationSignal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm Indication Signal (AIS)."
::= { cwsPtpModemOdu4Entry 3 }
cwsPtpModemOdu4Locked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Locked (LCK)."
::= { cwsPtpModemOdu4Entry 4 }
cwsPtpModemOdu4SignalFail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signal Fail."
::= { cwsPtpModemOdu4Entry 5 }
cwsPtpModemOdu4SignalDegrade OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signal Degrade."
::= { cwsPtpModemOdu4Entry 6 }
cwsPtpModemOdu4TrailTraceIdMismatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trail Trace Identifier Mismatch."
::= { cwsPtpModemOdu4Entry 7 }
cwsPtpModemOdu4BackwardDefectIndication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Backward Defect Indication."
::= { cwsPtpModemOdu4Entry 8 }
cwsPtpModemOdu4PayloadLabelMismatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload Label Mismatch."
::= { cwsPtpModemOdu4Entry 9 }
cwsPtpModemOdu4ClientSignalFailure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Client Signal Failure."
::= { cwsPtpModemOdu4Entry 10 }
-- Conformance statements
cienaWsPtpModemObjects OBJECT IDENTIFIER
::= { cienaWsPtpModemMIB 1 }
cienaWsPtpModemConformance OBJECT IDENTIFIER
::= { cienaWsPtpModemMIB 2 }
cienaWsPtpModemGroups OBJECT IDENTIFIER
::= { cienaWsPtpModemConformance 1 }
cienaWsPtpModemGroup OBJECT-GROUP
OBJECTS {
cwsPtpModemTransmitterLineSystemChannelNumber,
cwsPtpModemFrequencyValue,
cwsPtpModemFrequencyMinValue,
cwsPtpModemFrequencyMaxValue,
cwsPtpModemFrequencyActual,
cwsPtpModemPowerValue,
cwsPtpModemPowerMinValue,
cwsPtpModemPowerMaxValue,
cwsPtpModemLineSystemType,
cwsPtpModemLineSystemWavelengthSpacing,
cwsPtpModemCmdSlot,
cwsPtpModemCmdPortIn,
cwsPtpModemCmdPortOut,
cwsPtpModemModemChannelContentionDetectionAvoidance,
cwsPtpModemModemPerformanceOptimizationMode,
cwsPtpModemModemCarrierCenteringMode,
cwsPtpModemModemInterleaverMode,
cwsPtpModemModemRotation,
cwsPtpModemModemSpectralOccupancyMode,
cwsPtpModemModemTxPowerReductionState,
cwsPtpModemModemTxReductionMode,
cwsPtpModemModemTxTuningMode,
cwsPtpModemModemDifferentialEncoding,
cwsPtpModemModemTxCompensationDispersionMode,
cwsPtpModemModemTxCompensationDispersionValue,
cwsPtpModemModemFastReceiverRecoveryState,
cwsPtpModemModemLaserCenteringRange,
cwsPtpModemPerformanceStatisticsSecondsSinceLastClear,
cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCount,
cwsPtpModemPerformanceStatisticsHighCorrectionCountSeconds,
cwsPtpModemPreFecBerActual,
cwsPtpModemPreFecBerMax,
cwsPtpModemPreFecBerMin,
cwsPtpModemPreFecBerAverage,
cwsPtpModemPostFecBerActual,
cwsPtpModemPostFecBerMax,
cwsPtpModemPostFecBerMin,
cwsPtpModemPostFecBerAverage,
cwsPtpModemQFactorActual,
cwsPtpModemQFactorMax,
cwsPtpModemQFactorMin,
cwsPtpModemQFactorAverage,
cwsPtpModemFecFrameErrorCountValue,
cwsPtpModemFecFrameErrorCountSeconds,
cwsPtpModemModemprefecsignalfailalarmActive,
cwsPtpModemModemprefecsignalfailalarmthresholdDbq,
cwsPtpModemModemprefecsignaldegradealarmActive,
cwsPtpModemModemprefecsignaldegradealarmthresholdDbq,
cwsPtpModemPreFecSignalFailFailStatus,
cwsPtpModemModemprefecsignalfailthresholdDbq,
cwsPtpModemModemprefecsignalfailthresholdBer,
cwsPtpModemPreFecSignalDegradeDegradeStatus,
cwsPtpModemModemprefecsignaldegradethresholdDbq,
cwsPtpModemModemprefecsignaldegradethresholdBer,
cwsPtpModemRxlinkdispersionTotal,
cwsPtpModemRxlinkdispersionCompensation,
cwsPtpModemTxlinkdispersionTotal,
cwsPtpModemTxlinkdispersionActual,
cwsPtpModemDifferentialGroupDelayMeanSupported,
cwsPtpModemDifferentialGroupDelayEstimatedInstance,
cwsPtpModemFastRxRecoveryState,
cwsPtpModemFastRxRecoveryNetworkConfiguration,
cwsPtpModemFastRxRecoveryPath1Dispersion,
cwsPtpModemFastRxRecoveryPath2Dispersion,
cwsXcvrColourlessRxChannelPowerActual,
cwsXcvrColourlessRxChannelPowerMaximum,
cwsXcvrColourlessRxChannelPowerMinimum,
cwsXcvrColourlessRxChannelPowerMaximumRecordedTime,
cwsXcvrColourlessRxChannelPowerMinimumRecordedTime,
cwsPtpModemColourlessRxChannelStatusLossOfSignal,
cwsPtpModemColourlessRxChannelStatusHighAlarmStatus,
cwsPtpModemColourlessRxChannelStatusLowAlarmStatus,
cwsXcvrColourlessTxChannelPowerActual,
cwsXcvrColourlessTxChannelPowerMaximum,
cwsXcvrColourlessTxChannelPowerMinimum,
cwsXcvrColourlessTxChannelPowerMaximumRecordedTime,
cwsXcvrColourlessTxChannelPowerMinimumRecordedTime,
cwsPtpModemDiagnosticsNumberOfOdu,
cwsPtpModemOtu4LossOfClock,
cwsPtpModemOtu4FrequencyOutOfRange,
cwsPtpModemOtu4LossOfFrame,
cwsPtpModemOtu4LossOfMultiFrame,
cwsPtpModemOtu4BackwardDefectIndication,
cwsPtpModemOtu4TrailTraceIdMismatch,
cwsPtpModemOdu4OpenConnectionIndication,
cwsPtpModemOdu4AlarmIndicationSignal,
cwsPtpModemOdu4Locked,
cwsPtpModemOdu4SignalFail,
cwsPtpModemOdu4SignalDegrade,
cwsPtpModemOdu4TrailTraceIdMismatch,
cwsPtpModemOdu4BackwardDefectIndication,
cwsPtpModemOdu4PayloadLabelMismatch,
cwsPtpModemOdu4ClientSignalFailure
}
STATUS current
DESCRIPTION "Conformance Group"
::= { cienaWsPtpModemGroups 1 }
cienaWsPtpModemCompliances OBJECT IDENTIFIER
::= { cienaWsPtpModemConformance 2 }
cienaWsPtpModemCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance"
MODULE MANDATORY-GROUPS { cienaWsPtpModemGroup }
::= { cienaWsPtpModemCompliances 1 }
END -- End module
Reference in New Issue View Git Blame Copy Permalink