4069 lines
147 KiB
Plaintext
4069 lines
147 KiB
Plaintext
-- *******************************************************************
|
|
-- Airespace Switching MIB
|
|
-- Copyright 2001 Airespace, Inc. All rights reserved.
|
|
|
|
-- This SNMP Management Information Specification
|
|
-- embodies Airespace's confidential and proprietary
|
|
-- intellectual property. LVL7 Systems retains all title
|
|
-- and ownership in the Specification including any revisions.
|
|
|
|
-- This Specification is supplied "AS IS", Airespace
|
|
-- makes no warranty, either expressed or implied,
|
|
-- as to the use, operation, condition, or performance of the
|
|
-- Specification.
|
|
|
|
|
|
-- Status: Release
|
|
-- Version: 3.2
|
|
-- Internal Source Code Version:1.75
|
|
-- Date: 19 Dec 2005
|
|
-- *******************************************************************
|
|
|
|
|
|
AIRESPACE-SWITCHING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
|
|
Counter32, Integer32, Unsigned32, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
DisplayString, PhysAddress,
|
|
RowStatus, MacAddress, TruthValue FROM SNMPv2-TC
|
|
airespace FROM AIRESPACE-REF-MIB
|
|
dot1qVlanIndex, dot1qFdbId FROM Q-BRIDGE-MIB
|
|
IANAifType FROM IANAifType-MIB;
|
|
|
|
--********************************************************************
|
|
--* MODULE IDENTITY
|
|
--********************************************************************
|
|
|
|
bsnSwitching MODULE-IDENTITY
|
|
LAST-UPDATED "200604100000Z"
|
|
ORGANIZATION "Airespace, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central Controllers (CC) that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Light-weight LWAPP Access Points.
|
|
|
|
This MIB provides configuration, statistics and
|
|
status information about the controller.
|
|
This includes controller statistics and provides
|
|
information such as Inventory, Trap logs, memory and
|
|
CPU. This MIB also provides configuration of CLI,
|
|
SNMP, LAG, DHCP, Spanning Tree, etc.
|
|
|
|
The relationship between controller and the LWAPP APs
|
|
can be depicted as follows:
|
|
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ CC + + CC + + CC + + CC +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
.. . . .
|
|
.. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ AP + + AP + + AP + + AP + + AP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ MN + + MN + + MN + + MN + + MN +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends it to the controller to which
|
|
it is logically connected.
|
|
|
|
Basic Service Set Identifier (BSSID)
|
|
|
|
The identifier for the service set comprising of
|
|
all the 802.11 stations under the control of
|
|
one coordinating Access Point. This identifier
|
|
happens to be the MAC address of the dot11 radio
|
|
interface of the Access Point. The wireless
|
|
clients that associate with the Access Point
|
|
get the wired uplink through this particular
|
|
dot11 interface.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity also referred to as 'controller'.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point.
|
|
|
|
Station Management (SMT)
|
|
|
|
This term refers to the internal management of the
|
|
802.11 protocol operations by the AP to work
|
|
cooperatively with the other APs and 802.11
|
|
devices in the network.
|
|
|
|
REFERENCE
|
|
|
|
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
|
|
and Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol. "
|
|
|
|
REVISION "200604100000Z"
|
|
|
|
DESCRIPTION
|
|
"Updated MIB with description and format"
|
|
|
|
::= { airespace 1 }
|
|
|
|
--********************************************************************
|
|
-- Major sections
|
|
--********************************************************************
|
|
|
|
agentInfoGroup OBJECT IDENTIFIER ::= { bsnSwitching 1 }
|
|
agentConfigGroup OBJECT IDENTIFIER ::= { bsnSwitching 2 }
|
|
agentSystemGroup OBJECT IDENTIFIER ::= { bsnSwitching 3 }
|
|
stats OBJECT IDENTIFIER ::= { bsnSwitching 4 }
|
|
switchingTraps OBJECT IDENTIFIER ::= { bsnSwitching 50 }
|
|
bsnSwitchingGroups OBJECT IDENTIFIER ::= { bsnSwitching 51 }
|
|
bsnSwitchingCompliances OBJECT IDENTIFIER ::= { bsnSwitching 52 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentInventoryGroup
|
|
--********************************************************************
|
|
|
|
|
|
agentInventoryGroup OBJECT IDENTIFIER ::= { agentInfoGroup 1 }
|
|
|
|
|
|
agentInventorySysDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Inventory system description."
|
|
::= { agentInventoryGroup 1 }
|
|
|
|
agentInventoryMachineType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the Machine used in the Switch."
|
|
::= { agentInventoryGroup 2 }
|
|
|
|
agentInventoryMachineModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Machine Model. "
|
|
::= { agentInventoryGroup 3 }
|
|
|
|
agentInventorySerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial number of the switch."
|
|
::= { agentInventoryGroup 4 }
|
|
|
|
|
|
agentInventoryMaintenanceLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Inventory Maintenance Level"
|
|
::= { agentInventoryGroup 6 }
|
|
|
|
|
|
agentInventoryBurnedInMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Burned-In MAC Address"
|
|
|
|
::= { agentInventoryGroup 9 }
|
|
|
|
agentInventoryOperatingSystem OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operating System running on this unit"
|
|
::= { agentInventoryGroup 10 }
|
|
|
|
agentInventoryManufacturerName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the switch manufacturer."
|
|
::= { agentInventoryGroup 12 }
|
|
|
|
agentInventoryProductName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the product."
|
|
::= { agentInventoryGroup 13 }
|
|
|
|
agentInventoryProductVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version of the product."
|
|
::= { agentInventoryGroup 14 }
|
|
|
|
agentInventoryIsGigECardPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if the Switch contains a Gigabit ethernet
|
|
card
|
|
."
|
|
::= { agentInventoryGroup 15 }
|
|
|
|
agentInventoryIsCryptoCardPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if the switch is carrying a Crypto card."
|
|
::= { agentInventoryGroup 16 }
|
|
|
|
agentInventoryIsForeignAPSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States whether the switch supports third party
|
|
Access Points."
|
|
::= { agentInventoryGroup 17 }
|
|
|
|
|
|
agentInventoryMaxNumberOfAPsSupported OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of APs supported with this
|
|
Controller."
|
|
|
|
::= { agentInventoryGroup 18 }
|
|
|
|
agentInventoryIsCryptoCard2Present OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if the switch is carrying second Crypto
|
|
card for 4400 controller."
|
|
::= { agentInventoryGroup 19 }
|
|
|
|
agentInventoryFipsModeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if FIPS (Federal Information Processing
|
|
Standards) mode has been enabled on the
|
|
controller.False if FIPS mode has not been
|
|
enabled. FIPS mode can only be enabled through
|
|
console."
|
|
DEFVAL {false}
|
|
::= { agentInventoryGroup 20 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTrapLogGroup
|
|
--********************************************************************
|
|
|
|
agentTrapLogGroup OBJECT IDENTIFIER ::= { agentInfoGroup 2}
|
|
|
|
agentTrapLogTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of traps sent since last
|
|
reset."
|
|
::= { agentTrapLogGroup 1 }
|
|
|
|
agentTrapLogTotalSinceLastViewed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of traps sent since last viewed."
|
|
::= { agentTrapLogGroup 3 }
|
|
|
|
agentRadioUpDownTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Up/Down traps sent since
|
|
last reset."
|
|
::= { agentTrapLogGroup 5 }
|
|
|
|
agentApAssociateDisassociateTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Associate/Disassociate
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 6 }
|
|
|
|
agentApLoadProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Load Profile Failure
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 7 }
|
|
|
|
agentApNoiseProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Noise Profile Failure
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 8 }
|
|
|
|
|
|
agentApInterferenceProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Interference Profile
|
|
Failure traps sent since last reset."
|
|
::= { agentTrapLogGroup 9 }
|
|
|
|
agentApCoverageProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Coverge Profile Failure
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 10 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTrapLogTable
|
|
--********************************************************************
|
|
|
|
agentTrapLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentTrapLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Trap Log"
|
|
::= { agentTrapLogGroup 4 }
|
|
|
|
agentTrapLogEntry OBJECT-TYPE
|
|
SYNTAX AgentTrapLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent trap log entry"
|
|
INDEX { agentTrapLogIndex }
|
|
::= { agentTrapLogTable 1 }
|
|
|
|
AgentTrapLogEntry ::= SEQUENCE {
|
|
agentTrapLogIndex Integer32,
|
|
agentTrapLogSystemTime DisplayString,
|
|
agentTrapLogTrap OCTET STRING
|
|
}
|
|
|
|
agentTrapLogIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index of trap entry"
|
|
::= { agentTrapLogEntry 1 }
|
|
|
|
agentTrapLogSystemTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System uptime when trap was sent. This entry
|
|
shows how long the system has been up when the
|
|
trap occurred."
|
|
::= { agentTrapLogEntry 2 }
|
|
|
|
agentTrapLogTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the trap sent."
|
|
::= { agentTrapLogEntry 22 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSwitchInfoGroup
|
|
--********************************************************************
|
|
|
|
agentSwitchInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 3 }
|
|
|
|
|
|
agentSwitchInfoLwappTransportMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer2(1),
|
|
layer3(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LWAPP transport mode specifies if the switch
|
|
is operating in Layer2 or Layer3 mode. This
|
|
attribute gives the current mode the switch is
|
|
operating on."
|
|
::= { agentSwitchInfoGroup 1 }
|
|
|
|
agentSwitchInfoPowerSupply1Present OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch has Power
|
|
Supply 1 present on it. This is applicable to
|
|
the 4200 series and will always return true for
|
|
the earlier device versions."
|
|
::= { agentSwitchInfoGroup 2 }
|
|
|
|
agentSwitchInfoPowerSupply1Operational OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch's Power Supply
|
|
1 is operational. This is applicable to the
|
|
4200 series and will always return true for the
|
|
earlier device versions."
|
|
::= { agentSwitchInfoGroup 3 }
|
|
|
|
agentSwitchInfoPowerSupply2Present OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch has Power
|
|
Supply 2 present on it. This is applicable to
|
|
the 4200 series and will always return false for
|
|
the earlier device versions."
|
|
::= { agentSwitchInfoGroup 4 }
|
|
|
|
agentSwitchInfoPowerSupply2Operational OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch's Power Supply
|
|
2 is operational.This is applicable to the 4200
|
|
series and will always return false for the
|
|
earlier device versions."
|
|
::= { agentSwitchInfoGroup 5 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentResourceInfoGroup
|
|
--********************************************************************
|
|
|
|
agentResourceInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 5 }
|
|
|
|
agentCurrentCPUUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current CPU Load of the switch in percentage."
|
|
::= { agentResourceInfoGroup 1 }
|
|
|
|
agentTotalMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total RAM of the switch in Kbytes."
|
|
::= { agentResourceInfoGroup 2 }
|
|
|
|
agentFreeMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Free RAM of the switch in Kbytes."
|
|
::= { agentResourceInfoGroup 3 }
|
|
|
|
--********************************************************************
|
|
-- agentWcpInfoGroup
|
|
--********************************************************************
|
|
|
|
|
|
agentWcpInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 6 }
|
|
|
|
agentWcpDeviceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the device this controller
|
|
is residing on."
|
|
::= { agentWcpInfoGroup 1 }
|
|
|
|
agentWcpSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number on the Wcp Device that this
|
|
controller is residing on."
|
|
::= { agentWcpInfoGroup 2 }
|
|
|
|
agentWcpPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number on the Wcp Device that this
|
|
controller is residing on."
|
|
::= { agentWcpInfoGroup 3 }
|
|
|
|
agentWcpPeerPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of this controller's peer on the
|
|
same slot on Wcp Device that this controller is
|
|
residing on."
|
|
::= { agentWcpInfoGroup 4 }
|
|
|
|
agentWcpPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this controller's peer on the
|
|
same slot on Wcp Device that this controller is
|
|
residing on."
|
|
::= { agentWcpInfoGroup 5 }
|
|
|
|
agentWcpControllerTableChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the checksum that tracks the changes in
|
|
the agentWcpControllerInfoTable. If there is any
|
|
change in the information on this table, the
|
|
checksum changes."
|
|
::= { agentWcpInfoGroup 6 }
|
|
|
|
agentWcpControllerInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentWcpControllerInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the wireless controllers on a WCP
|
|
device."
|
|
::= { agentWcpInfoGroup 7 }
|
|
|
|
agentWcpControllerInfoEntry OBJECT-TYPE
|
|
SYNTAX AgentWcpControllerInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry for a wireless controller on a WCP
|
|
device."
|
|
INDEX { agentWcpControllerInfoSlotNumber,
|
|
agentWcpControllerInfoPortNumber }
|
|
::= { agentWcpControllerInfoTable 1 }
|
|
|
|
AgentWcpControllerInfoEntry ::= SEQUENCE {
|
|
agentWcpControllerInfoSlotNumber Unsigned32,
|
|
agentWcpControllerInfoPortNumber Unsigned32,
|
|
agentWcpControllerInfoIpAddress IpAddress
|
|
}
|
|
|
|
agentWcpControllerInfoSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number on the Wcp device that a
|
|
controller is residing on."
|
|
::= { agentWcpControllerInfoEntry 1 }
|
|
|
|
agentWcpControllerInfoPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number on the Wcp Device that a
|
|
controller is residing on."
|
|
::= { agentWcpControllerInfoEntry 2 }
|
|
|
|
agentWcpControllerInfoIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management IP Address of a controller."
|
|
::= { agentWcpControllerInfoEntry 10 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentProductGroup
|
|
--********************************************************************
|
|
|
|
agentProductGroup OBJECT IDENTIFIER ::= { agentInfoGroup 4 }
|
|
|
|
--********************************************************************
|
|
-- productGroup1. This includes the 4000 switch series: 4012, 4024 and
|
|
-- the 4100 appliance series: 4101 and 4102
|
|
--********************************************************************
|
|
|
|
productGroup1 OBJECT IDENTIFIER ::= { agentProductGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- productGroup2. This includes the Branch Office Switch series
|
|
--********************************************************************
|
|
|
|
productGroup2 OBJECT IDENTIFIER ::= { agentProductGroup 2 }
|
|
|
|
--********************************************************************
|
|
-- productGroup3. This includes the 4200 switch series: 4202 and 4204
|
|
--
|
|
--********************************************************************
|
|
|
|
productGroup3 OBJECT IDENTIFIER ::= { agentProductGroup 3 }
|
|
|
|
--********************************************************************
|
|
-- productGroup4. This includes the Catalyst 6k series with 2
|
|
-- 4204s on a single blade
|
|
--********************************************************************
|
|
|
|
productGroup4 OBJECT IDENTIFIER ::= { agentProductGroup 4 }
|
|
|
|
--********************************************************************
|
|
agentCLIConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- agentLoginSessionTable
|
|
--********************************************************************
|
|
|
|
agentLoginSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLoginSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's login session"
|
|
::= { agentCLIConfigGroup 1 }
|
|
|
|
agentLoginSessionEntry OBJECT-TYPE
|
|
SYNTAX AgentLoginSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Login Session Entry"
|
|
INDEX { agentLoginSessionIndex }
|
|
::= { agentLoginSessionTable 1 }
|
|
|
|
AgentLoginSessionEntry ::= SEQUENCE {
|
|
agentLoginSessionIndex Integer32,
|
|
agentLoginSessionUserName DisplayString,
|
|
agentLoginSessionIPAddress IpAddress,
|
|
agentLoginSessionConnectionType INTEGER,
|
|
agentLoginSessionIdleTime TimeTicks,
|
|
agentLoginSessionSessionTime TimeTicks,
|
|
agentLoginSessionStatus RowStatus
|
|
}
|
|
|
|
agentLoginSessionIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Index of the switch"
|
|
::= { agentLoginSessionEntry 1 }
|
|
|
|
agentLoginSessionUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session UserName of the switch"
|
|
::= { agentLoginSessionEntry 2 }
|
|
|
|
agentLoginSessionIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session IP Address of the switch"
|
|
::= { agentLoginSessionEntry 3 }
|
|
|
|
agentLoginSessionConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serial(1),
|
|
telnet(2),
|
|
web(3),
|
|
ssl(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Connection Type of the
|
|
switch"
|
|
::= { agentLoginSessionEntry 4 }
|
|
|
|
agentLoginSessionIdleTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Idle Time of the switch"
|
|
::= { agentLoginSessionEntry 5 }
|
|
|
|
agentLoginSessionSessionTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Time of the switch"
|
|
::= { agentLoginSessionEntry 6 }
|
|
|
|
agentLoginSessionStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the user.
|
|
active(1) - This connection is active.
|
|
destroy(6) - Set to this value to disconnect
|
|
this user."
|
|
::= { agentLoginSessionEntry 26 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTelnetConfigGroup
|
|
--********************************************************************
|
|
|
|
agentTelnetConfigGroup OBJECT IDENTIFIER ::= {agentCLIConfigGroup 2}
|
|
|
|
agentTelnetLoginTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..160)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telnet login timeout (minutes)
|
|
Config telnet timeout will set the telnet
|
|
session timeout value. A session is active as
|
|
long as the session has not remained idle for
|
|
the value set. Specify a value from 0 to 160.
|
|
A value of 0 indicates that a Telnet session
|
|
remains active indefinitely.
|
|
Note: Changing the timeout value for active
|
|
sessions does not become effective until the
|
|
session is reaccessed. Any keystroke will
|
|
also activate the new timeout duration."
|
|
::= { agentTelnetConfigGroup 1 }
|
|
|
|
agentTelnetMaxSessions OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of Telnet Sessions
|
|
Config telnet maxsessions is an integer value
|
|
from 0 to 5 that specifies the maximum number of
|
|
telnet sessions that can be established. If the
|
|
value is 0, no Telnet session can be established."
|
|
::= { agentTelnetConfigGroup 2 }
|
|
|
|
agentTelnetAllowNewMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow new telnet sessions (enable or disable)
|
|
Config telnet disable means that no new Telnet
|
|
sessions are to be established. Any already
|
|
established session remains active until
|
|
the session is ended or an abnormal network error
|
|
ends it. "
|
|
::= { agentTelnetConfigGroup 3 }
|
|
|
|
agentSSHAllowNewMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow new SSH sessions (enable or disable)
|
|
Config SSH disable means that no new SSH sessions
|
|
are to be established. Any already established
|
|
session remains active until the session is ended
|
|
or an abnormal network error ends it."
|
|
::= { agentTelnetConfigGroup 4 }
|
|
|
|
--********************************************************************
|
|
-- agentSerialGroup
|
|
--********************************************************************
|
|
|
|
agentSerialGroup OBJECT IDENTIFIER ::= { agentCLIConfigGroup 5 }
|
|
|
|
agentSerialTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Serial Timeout "
|
|
::= { agentSerialGroup 1 }
|
|
|
|
agentSerialBaudrate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
baud1200(1),
|
|
baud2400(2),
|
|
baud4800(3),
|
|
baud9600(4),
|
|
baud19200(5),
|
|
baud38400(6),
|
|
baud57600(7),
|
|
baud115200(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Baudrate"
|
|
::= { agentSerialGroup 2 }
|
|
|
|
agentSerialCharacterSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Character Size"
|
|
::= { agentSerialGroup 3 }
|
|
|
|
agentSerialHWFlowControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Hardware Flow Control."
|
|
::= { agentSerialGroup 4 }
|
|
|
|
agentSerialStopBits OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Stop Bits"
|
|
::= { agentSerialGroup 5 }
|
|
|
|
agentSerialParityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
even(1),
|
|
odd(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Parity Type"
|
|
::= { agentSerialGroup 6 }
|
|
|
|
--*******************************************************************
|
|
-- agentLagConfigGroup
|
|
--********************************************************************
|
|
agentLagConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 2 }
|
|
|
|
agentLagConfigCreate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Create.
|
|
When this object is set with a non-empty string,
|
|
a new lag will be created.if possible with the
|
|
entered string as it's name."
|
|
::= { agentLagConfigGroup 1 }
|
|
|
|
agentLagSummaryConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLagSummaryConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A summary table of the switch's lag config
|
|
entries"
|
|
::= { agentLagConfigGroup 2 }
|
|
|
|
agentLagSummaryConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentLagSummaryConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Switch's lag config entry"
|
|
INDEX { agentLagSummaryName }
|
|
::= { agentLagSummaryConfigTable 1 }
|
|
|
|
AgentLagSummaryConfigEntry ::= SEQUENCE {
|
|
agentLagSummaryName DisplayString,
|
|
agentLagSummaryLagIndex Integer32,
|
|
agentLagSummaryFlushTimer Integer32,
|
|
agentLagSummaryLinkTrap INTEGER,
|
|
agentLagSummaryAdminMode INTEGER,
|
|
agentLagSummaryStpMode INTEGER,
|
|
agentLagSummaryAddPort Integer32,
|
|
agentLagSummaryDeletePort Integer32,
|
|
agentLagSummaryPortsBitMask Unsigned32,
|
|
agentLagSummaryStatus RowStatus
|
|
}
|
|
agentLagSummaryName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..15))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Name"
|
|
::= { agentLagSummaryConfigEntry 1 }
|
|
|
|
agentLagSummaryLagIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag If Index"
|
|
::= { agentLagSummaryConfigEntry 2 }
|
|
|
|
|
|
agentLagSummaryFlushTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Flush Timer"
|
|
::= { agentLagSummaryConfigEntry 3 }
|
|
|
|
agentLagSummaryLinkTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Link Trap"
|
|
::= { agentLagSummaryConfigEntry 4 }
|
|
|
|
agentLagSummaryAdminMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Admin Mode"
|
|
::= { agentLagSummaryConfigEntry 5 }
|
|
|
|
agentLagSummaryStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1d(1),
|
|
fast(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag STP Mode"
|
|
::= { agentLagSummaryConfigEntry 6 }
|
|
|
|
agentLagSummaryAddPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Add Port.
|
|
Note: agentPortType for the port to be added
|
|
must be full duplex and the same speed as
|
|
previously added port(s), if any."
|
|
::= { agentLagSummaryConfigEntry 7 }
|
|
|
|
agentLagSummaryDeletePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Delete Port"
|
|
::= { agentLagSummaryConfigEntry 8 }
|
|
|
|
agentLagSummaryPortsBitMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Member Ports in bit mask
|
|
representation"
|
|
::= { agentLagSummaryConfigEntry 9 }
|
|
|
|
agentLagSummaryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Status.
|
|
active(1) - This Lag is enabled.
|
|
destroy(6) - Set to this value to remove the
|
|
Lag."
|
|
::= { agentLagSummaryConfigEntry 30 }
|
|
|
|
|
|
--*******************************************************************
|
|
-- agentLagDetailedConfigTable
|
|
--*******************************************************************
|
|
|
|
agentLagDetailedConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLagDetailedConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A detailed table of the switch's lag config
|
|
entries"
|
|
::= { agentLagConfigGroup 3 }
|
|
|
|
agentLagDetailedConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentLagDetailedConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Switch's lag config entry"
|
|
INDEX { agentLagDetailedLagIndex,
|
|
agentLagDetailedIfIndex }
|
|
::= { agentLagDetailedConfigTable 1 }
|
|
|
|
AgentLagDetailedConfigEntry ::= SEQUENCE {
|
|
agentLagDetailedLagIndex Integer32,
|
|
agentLagDetailedIfIndex Integer32,
|
|
agentLagDetailedPortSpeed OBJECT IDENTIFIER
|
|
}
|
|
|
|
agentLagDetailedLagIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Lag index"
|
|
::= { agentLagDetailedConfigEntry 1 }
|
|
|
|
agentLagDetailedIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Lag port index"
|
|
::= { agentLagDetailedConfigEntry 2 }
|
|
|
|
agentLagDetailedPortSpeed OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Lag port speed. See agentPortType for
|
|
description and list of valid values."
|
|
::= { agentLagDetailedConfigEntry 22 }
|
|
|
|
|
|
agentLagConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Lag Mode on the 4400 series controller. When
|
|
it is on, all the gigabit ports are bound to one
|
|
aggregated link."
|
|
::= { agentLagConfigGroup 4 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentNetworkConfigGroup
|
|
--********************************************************************
|
|
|
|
agentNetworkConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 3 }
|
|
|
|
agentNetworkIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network ip address"
|
|
::= { agentNetworkConfigGroup 1 }
|
|
|
|
agentNetworkSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network subnet mask"
|
|
::= { agentNetworkConfigGroup 2 }
|
|
|
|
agentNetworkDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network default gateway"
|
|
::= { agentNetworkConfigGroup 3 }
|
|
|
|
agentNetworkBurnedInMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Burned-In MAC address"
|
|
::= { agentNetworkConfigGroup 4 }
|
|
|
|
agentNetworkConfigProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
bootp(2),
|
|
dhcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network config protocol"
|
|
::= { agentNetworkConfigGroup 7 }
|
|
|
|
agentNetworkWebMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's web access mode."
|
|
::= { agentNetworkConfigGroup 8 }
|
|
|
|
agentNetworkSecureWebMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If https is enable or not provided web mode is
|
|
enabled"
|
|
::= { agentNetworkConfigGroup 9 }
|
|
|
|
agentNetworkMulticastMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's ethernet multicast support.
|
|
disable- multicast is disabled
|
|
multicast - Multicast is enabled.
|
|
unicast- Controller will convert multicast to
|
|
unicast packet."
|
|
::= { agentNetworkConfigGroup 10 }
|
|
|
|
agentNetworkDsPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's distribution port number."
|
|
::= { agentNetworkConfigGroup 11 }
|
|
|
|
agentNetworkUserIdleTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(10..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the idle user timeout."
|
|
::= { agentNetworkConfigGroup 12 }
|
|
|
|
|
|
agentNetworkArpTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(10..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the ARP entry timeout."
|
|
::= { agentNetworkConfigGroup 13 }
|
|
|
|
agentNetworkManagementVlan OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID of the network management interface."
|
|
::= { agentNetworkConfigGroup 14 }
|
|
|
|
agentNetworkGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The state of GVRP operation on the Switch. The value
|
|
enabled(1) indicates that GVRP is enabled on this port,
|
|
as long as dot1qGvrpStatus is also enabled for this
|
|
device. When disabled(2) but dot1qGvrpStatus is still
|
|
enabled for the device, GVRP is disabled on this port:
|
|
any GVRP packets received will be silently discarded and
|
|
no GVRP registrations will be propagated from other
|
|
ports. This object affects all GVRP Applicant and
|
|
Registrar state machines on this port. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on this port.(Attribute No longer
|
|
supported)"
|
|
DEFVAL { enabled }
|
|
::= { agentNetworkConfigGroup 15 }
|
|
|
|
agentNetworkAllowMgmtViaWireless OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(1),disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This states whether Management via wireless is
|
|
allowed or not."
|
|
::= { agentNetworkConfigGroup 16 }
|
|
|
|
agentNetworkBroadcastSsidMode OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(1),disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mode when enabled allows WLAN SSIDs to be
|
|
broadcasted."
|
|
::= { agentNetworkConfigGroup 17 }
|
|
|
|
agentNetworkSecureWebPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSL Certificate Password. This can be optionally
|
|
set while downloading SSL certificates of type
|
|
Web Admin and Web Authentication"
|
|
::= { agentNetworkConfigGroup 18 }
|
|
|
|
agentNetworkWebAdminCertType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of currently existing Web Admin Certificate
|
|
installed on the Switch. It could be 'Empty' if the
|
|
certificate is not present, 'Locally Generated' if
|
|
the certificate is locally generated or it could
|
|
have a name if it is downloaded externally."
|
|
::= { agentNetworkConfigGroup 19 }
|
|
|
|
agentNetworkWebAdminCertRegenerateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER { default (0), activate (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This command when set to 'activate' will regenerate
|
|
a Web Administration Certificate Locally that will
|
|
replace the existing certificate."
|
|
::= { agentNetworkConfigGroup 20 }
|
|
|
|
agentNetworkWebAuthCertType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of currently exisitng Web Authentication
|
|
Certificate installed on the Switch. It could be
|
|
'Empty' if the certificate is not present, 'Locally
|
|
Generated' if the certificate is locally generated or
|
|
it could have a name if it is downloaded externally."
|
|
::= { agentNetworkConfigGroup 21 }
|
|
|
|
agentNetworkWebAuthCertRegenerateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER { default (0), activate (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This command when set to 'activate' will regenerate a
|
|
Web Authentication Certificate Locally that will
|
|
replace the existing certificate."
|
|
::= { agentNetworkConfigGroup 22 }
|
|
|
|
agentNetworkPeerToPeerBlockingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(1),disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Peer to Peer Blocking mode on the switch."
|
|
::= { agentNetworkConfigGroup 24 }
|
|
|
|
agentNetworkMulticastGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast group address for access points."
|
|
::= { agentNetworkConfigGroup 25 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentNeworkRouteTable
|
|
--********************************************************************
|
|
|
|
agentNetworkRouteConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentNetworkRouteConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's Network Route entries"
|
|
::= { agentNetworkConfigGroup 23 }
|
|
|
|
agentNetworkRouteConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentNetworkRouteConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's Network Route entry"
|
|
INDEX {agentNetworkRouteIPAddress }
|
|
::= { agentNetworkRouteConfigTable 1 }
|
|
|
|
AgentNetworkRouteConfigEntry ::= SEQUENCE {
|
|
agentNetworkRouteIPAddress IpAddress,
|
|
agentNetworkRouteIPNetmask IpAddress,
|
|
agentNetworkRouteGateway IpAddress,
|
|
agentNetworkRouteStatus RowStatus
|
|
}
|
|
|
|
agentNetworkRouteIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Route IP Address."
|
|
::= { agentNetworkRouteConfigEntry 1 }
|
|
|
|
agentNetworkRouteIPNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Network Route IP Netmask."
|
|
::= { agentNetworkRouteConfigEntry 2 }
|
|
|
|
agentNetworkRouteGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Network Route IP Gateway."
|
|
::= { agentNetworkRouteConfigEntry 3 }
|
|
|
|
agentNetworkRouteStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Route Row Status."
|
|
::= { agentNetworkRouteConfigEntry 23 }
|
|
|
|
|
|
|
|
--********************************************************************
|
|
-- agentInterfaceConfigTable
|
|
--********************************************************************
|
|
|
|
agentInterfaceConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentInterfaceConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's Interface Config entries
|
|
Typically, it will contain entries for Service
|
|
Port Interface, DS Port Interface and Virtual
|
|
Gateway Interface apart from other entries."
|
|
::= { agentConfigGroup 13 }
|
|
|
|
agentInterfaceConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentInterfaceConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's Interface Config entry"
|
|
INDEX { agentInterfaceName }
|
|
::= { agentInterfaceConfigTable 1 }
|
|
|
|
AgentInterfaceConfigEntry ::= SEQUENCE {
|
|
agentInterfaceName OCTET STRING,
|
|
agentInterfaceVlanId Integer32,
|
|
agentInterfaceType INTEGER,
|
|
agentInterfaceMacAddress MacAddress,
|
|
agentInterfaceIPAddress IpAddress,
|
|
agentInterfaceIPNetmask IpAddress,
|
|
agentInterfaceIPGateway IpAddress,
|
|
agentInterfacePortNo Integer32,
|
|
agentInterfaceActivePortNo Integer32,
|
|
agentInterfaceBackupPortNo Integer32,
|
|
agentInterfacePrimaryDhcpAddress IpAddress,
|
|
agentInterfaceSecondaryDhcpAddress IpAddress,
|
|
agentInterfaceDhcpProtocol INTEGER,
|
|
agentInterfaceDnsHostName DisplayString,
|
|
agentInterfaceAclName DisplayString,
|
|
agentInterfaceAPManagementFeature INTEGER,
|
|
agentInterfaceRowStatus RowStatus,
|
|
agentInterfaceVlanQuarantine TruthValue
|
|
}
|
|
|
|
agentInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interace Name. This values is 'management' for DS
|
|
port, 'service-port' for service port and 'virtual'
|
|
for virtual gateway. For other interfaces, the name
|
|
can be anything. These interfaces are already created
|
|
by default."
|
|
::= { agentInterfaceConfigEntry 1 }
|
|
|
|
agentInterfaceVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan ID configured for the Interface."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 2 }
|
|
|
|
agentInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(0),
|
|
dynamic(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface's type. The static type is set for
|
|
the interfaces that are created by default on the
|
|
switch and these cannot be deleted. Any other
|
|
interface that is created is of type dynamic
|
|
which can be deleted."
|
|
::= { agentInterfaceConfigEntry 3 }
|
|
|
|
agentInterfaceMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface MAC Address. This is only applicable in
|
|
case of management and service-port interfaces."
|
|
::= { agentInterfaceConfigEntry 4 }
|
|
|
|
agentInterfaceIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the interface."
|
|
::= { agentInterfaceConfigEntry 5 }
|
|
|
|
agentInterfaceIPNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Netmask of the interface. This is 0 for the
|
|
virtual interface."
|
|
::= { agentInterfaceConfigEntry 6 }
|
|
|
|
agentInterfaceIPGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Gateway of the interface. This is 0 for virtual
|
|
and service-port interface."
|
|
::= { agentInterfaceConfigEntry 7 }
|
|
|
|
agentInterfacePortNo OBJECT-TYPE
|
|
SYNTAX Integer32(0..25)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value 0 means the port is not set. The valid value
|
|
can be any one of the physical ports on the switch.
|
|
This is the primary port configured on the
|
|
interface."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 8 }
|
|
|
|
agentInterfacePrimaryDhcpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary DHCP Server IP Address for the interface
|
|
This applies to the management interface and other
|
|
dynamic interfaces."
|
|
::= { agentInterfaceConfigEntry 9 }
|
|
|
|
agentInterfaceSecondaryDhcpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary DHCP Server IP Address for the interface.
|
|
This applies to the management interface and other
|
|
dynamic interfaces."
|
|
::= { agentInterfaceConfigEntry 10 }
|
|
|
|
agentInterfaceDhcpProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface's DHCP protocol. This applies only
|
|
to the service port interface."
|
|
::= { agentInterfaceConfigEntry 11 }
|
|
|
|
agentInterfaceDnsHostName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS host name for the Virtual Interface.
|
|
This attribute is not valid for other
|
|
interfaces."
|
|
::= { agentInterfaceConfigEntry 12 }
|
|
|
|
agentInterfaceAclName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Access Control List applied to the
|
|
interface. This attribute is applicable only to
|
|
the management interface and other dynamic
|
|
interfaces. If it is required to remove the ACL
|
|
name for an interface, it should be set to an
|
|
empty string."
|
|
::= { agentInterfaceConfigEntry 13 }
|
|
|
|
agentInterfaceAPManagementFeature OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the dynamic interface can be used for AP
|
|
management. SNMP support for AP management through
|
|
dynamic interfaces has been introduced since '3.0.21.0'
|
|
release. Only applicable to dynamic interfaces in 4200
|
|
series. In static interfaces, 'disable' value 0
|
|
is returned. In 4000/3500 series of switches, 'disable'
|
|
value 0 is returned."
|
|
::= { agentInterfaceConfigEntry 14 }
|
|
|
|
agentInterfaceActivePortNo OBJECT-TYPE
|
|
SYNTAX Integer32(0..25)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the currently active port for this
|
|
interface."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 15 }
|
|
|
|
agentInterfaceBackupPortNo OBJECT-TYPE
|
|
SYNTAX Integer32(0..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This values is valid only for the 4200 series of
|
|
switches. The backup port is the port this interface
|
|
is moved to once the primary port fails. A value 0
|
|
means the port is not set. The valid value can be
|
|
any one of the physical ports on the 4200 switch."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 16 }
|
|
|
|
agentInterfaceVlanQuarantine OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the health of the
|
|
interface identified by agentInterfaceName.
|
|
|
|
A value of 'true' is used to indicate that this
|
|
particular interface is unhealthy. In this case,
|
|
the data packets of the clients, that are assigned
|
|
the VLAN Id corresponding to this interface, must
|
|
be tunneled to the Controller by the REAP AP.
|
|
|
|
A value of 'false' indicates that the VLAN configured
|
|
against the interface is healthy and that the REAP
|
|
AP can switch the clients of this VLAN locally rather
|
|
than tunneling them to the Controller. "
|
|
DEFVAL { false }
|
|
::= { agentInterfaceConfigEntry 17 }
|
|
|
|
agentInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface entry Row status."
|
|
::= { agentInterfaceConfigEntry 31 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentNtpConfigGroup - Configuration of Switch Network Time Protocol
|
|
--********************************************************************
|
|
agentNtpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 14 }
|
|
|
|
agentNtpPollingInterval OBJECT-TYPE
|
|
SYNTAX Integer32(3600..604800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Time Protocol polling interval. Min value
|
|
is one hour and maximum is a week."
|
|
::= { agentNtpConfigGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- agentNtpServerTable - Configuration of Network Time Protocol Server
|
|
--********************************************************************
|
|
|
|
agentNtpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A summary table for switch's lag config entries"
|
|
::= { agentNtpConfigGroup 2 }
|
|
|
|
agentNtpServerEntry OBJECT-TYPE
|
|
SYNTAX AgentNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's NTP Server entry. Upto 4 entries may be
|
|
added."
|
|
INDEX { agentNtpServerIndex }
|
|
::= { agentNtpServerTable 1 }
|
|
|
|
AgentNtpServerEntry ::= SEQUENCE {
|
|
agentNtpServerIndex Integer32,
|
|
agentNtpServerAddress IpAddress,
|
|
agentNtpServerRowStatus RowStatus
|
|
}
|
|
|
|
agentNtpServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP Server priority index."
|
|
::= { agentNtpServerEntry 1 }
|
|
|
|
|
|
agentNtpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the NTP Server"
|
|
::= { agentNtpServerEntry 2 }
|
|
|
|
agentNtpServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP server entry row status."
|
|
::= { agentNtpServerEntry 20 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentDhcpConfigGroup - Configuration of Switch DHCP Server and
|
|
-- its Scopes
|
|
--********************************************************************
|
|
agentDhcpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 15 }
|
|
|
|
agentDhcpScopeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpScopeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table listing the Scopes defined on the
|
|
switch's DHCP Server."
|
|
::= { agentDhcpConfigGroup 1 }
|
|
|
|
agentDhcpScopeEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpScopeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's DHCP Server Scope entry."
|
|
INDEX { agentDhcpScopeIndex }
|
|
::= { agentDhcpScopeTable 1 }
|
|
|
|
AgentDhcpScopeEntry ::= SEQUENCE {
|
|
agentDhcpScopeIndex Unsigned32,
|
|
agentDhcpScopeName DisplayString,
|
|
agentDhcpScopeLeaseTime Integer32,
|
|
agentDhcpScopeNetwork IpAddress,
|
|
agentDhcpScopeNetmask IpAddress,
|
|
agentDhcpScopePoolStartAddress IpAddress,
|
|
agentDhcpScopePoolEndAddress IpAddress,
|
|
agentDhcpScopeDefaultRouterAddress1 IpAddress,
|
|
agentDhcpScopeDefaultRouterAddress2 IpAddress,
|
|
agentDhcpScopeDefaultRouterAddress3 IpAddress,
|
|
agentDhcpScopeDnsDomainName DisplayString,
|
|
agentDhcpScopeDnsServerAddress1 IpAddress,
|
|
agentDhcpScopeDnsServerAddress2 IpAddress,
|
|
agentDhcpScopeDnsServerAddress3 IpAddress,
|
|
agentDhcpScopeNetbiosNameServerAddress1 IpAddress,
|
|
agentDhcpScopeNetbiosNameServerAddress2 IpAddress,
|
|
agentDhcpScopeNetbiosNameServerAddress3 IpAddress,
|
|
agentDhcpScopeState INTEGER,
|
|
agentDhcpScopeRowStatus RowStatus
|
|
}
|
|
|
|
agentDhcpScopeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope Identifier Index."
|
|
::= { agentDhcpScopeEntry 1 }
|
|
|
|
agentDhcpScopeName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..79))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope Name."
|
|
::= { agentDhcpScopeEntry 2 }
|
|
|
|
agentDhcpScopeLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32(120..8640000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope Lease time in seconds."
|
|
::= { agentDhcpScopeEntry 3 }
|
|
|
|
agentDhcpScopeNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope Network. This is
|
|
the address which is used to determine the DHCP
|
|
scope a remote Switch is attaching to."
|
|
::= { agentDhcpScopeEntry 4 }
|
|
|
|
agentDhcpScopeNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Scope Netmask. This the subnet mask for
|
|
the address pool."
|
|
::= { agentDhcpScopeEntry 5 }
|
|
|
|
agentDhcpScopePoolStartAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Scope address pool start IP address."
|
|
::= { agentDhcpScopeEntry 6 }
|
|
|
|
agentDhcpScopePoolEndAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Scope address pool end IP address."
|
|
::= { agentDhcpScopeEntry 7 }
|
|
|
|
agentDhcpScopeDefaultRouterAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's default Router
|
|
1."
|
|
::= { agentDhcpScopeEntry 8 }
|
|
|
|
agentDhcpScopeDefaultRouterAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's default Router
|
|
2."
|
|
::= { agentDhcpScopeEntry 9 }
|
|
|
|
agentDhcpScopeDefaultRouterAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's default Router
|
|
3."
|
|
::= { agentDhcpScopeEntry 10 }
|
|
|
|
agentDhcpScopeDnsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..79))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Domain name for the DHCP Scope."
|
|
::= { agentDhcpScopeEntry 11 }
|
|
|
|
agentDhcpScopeDnsServerAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's DNS Server 1."
|
|
::= { agentDhcpScopeEntry 12 }
|
|
|
|
agentDhcpScopeDnsServerAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's DNS Server 2."
|
|
::= { agentDhcpScopeEntry 13 }
|
|
|
|
agentDhcpScopeDnsServerAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's DNS Server 3."
|
|
::= { agentDhcpScopeEntry 14 }
|
|
|
|
agentDhcpScopeNetbiosNameServerAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of DHCP Scope's Netbios Name Server
|
|
1."
|
|
::= { agentDhcpScopeEntry 15 }
|
|
|
|
agentDhcpScopeNetbiosNameServerAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of DHCP Scope's Netbios Name Server
|
|
2."
|
|
::= { agentDhcpScopeEntry 16 }
|
|
|
|
agentDhcpScopeNetbiosNameServerAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of DHCP Scope's Netbios Name Server
|
|
3."
|
|
::= { agentDhcpScopeEntry 17 }
|
|
|
|
agentDhcpScopeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope's State."
|
|
::= { agentDhcpScopeEntry 18 }
|
|
|
|
agentDhcpScopeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dhcp Scope entry row status."
|
|
::= { agentDhcpScopeEntry 30 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentServicePortConfigGroup
|
|
-- (Interface of type service-port in agentInterfaceConfigTable
|
|
-- use is recommended instead of this group.)
|
|
--********************************************************************
|
|
|
|
agentServicePortConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentConfigGroup 4 }
|
|
|
|
agentServicePortIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port IP address.
|
|
(Service-port interface use is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 1 }
|
|
|
|
agentServicePortSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port subnet mask.
|
|
(Service-port interface in
|
|
agentInterfaceConfigTable is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 2 }
|
|
|
|
agentServicePortDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Not Supported for release 1.0. The switch's
|
|
Service Port default gateway. (Service-port
|
|
interface in agentInterfaceConfigTable is
|
|
recommended instead of this group)"
|
|
::= { agentServicePortConfigGroup 3 }
|
|
|
|
agentServicePortBurnedInMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port Burned-In MAC address
|
|
(Service-port interface in
|
|
agentInterfaceConfigTable is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 4 }
|
|
|
|
agentServicePortConfigProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
dhcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port config protocol
|
|
(Service-port interface in
|
|
agentInterfaceConfigTable is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 5 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSnmpConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSnmpConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 5}
|
|
|
|
|
|
agentSnmpTrapPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65534)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Trap Port Number"
|
|
::= { agentSnmpConfigGroup 1 }
|
|
|
|
agentSnmpVersion1Status OBJECT-TYPE
|
|
SYNTAX INTEGER{disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Version 1 Status"
|
|
::= { agentSnmpConfigGroup 2 }
|
|
|
|
agentSnmpVersion2cStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Version 2c Status"
|
|
::= { agentSnmpConfigGroup 3 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSnmpCommunityConfigTable
|
|
--********************************************************************
|
|
agentSnmpCommunityConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSnmpCommunityConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's SNMP community Config
|
|
entries"
|
|
::= { agentSnmpConfigGroup 5 }
|
|
|
|
agentSnmpCommunityConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentSnmpCommunityConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's SNMP community Config entry"
|
|
INDEX {agentSnmpCommunityName }
|
|
::= { agentSnmpCommunityConfigTable 1 }
|
|
|
|
AgentSnmpCommunityConfigEntry ::= SEQUENCE {
|
|
agentSnmpCommunityName DisplayString,
|
|
agentSnmpCommunityIPAddress IpAddress,
|
|
agentSnmpCommunityIPMask IpAddress,
|
|
agentSnmpCommunityAccessMode INTEGER,
|
|
agentSnmpCommunityEnabled INTEGER,
|
|
agentSnmpCommunityStatus RowStatus
|
|
}
|
|
|
|
agentSnmpCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community Name
|
|
This name identifies each SNMP community;
|
|
the name can be up to 16 characters, and it is
|
|
case-sensitive. Community names in the SNMP
|
|
community must be unique. If you make multiple
|
|
entries using the same community name, the first
|
|
entry is kept and processed and all duplicate
|
|
entries are ignored. "
|
|
::= { agentSnmpCommunityConfigEntry 1 }
|
|
|
|
agentSnmpCommunityIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community IP Address
|
|
Client IP Address - This attribute is an IP
|
|
address (or portion thereof) from which this
|
|
device will accept SNMP packets with the
|
|
associated community. The requesting entity's IP
|
|
address is logical-ANDed with the Client IP Mask
|
|
and the result must match the Client IP Address.
|
|
Note: If the Client IP Mask is set to 0.0.0.0, a
|
|
Client IP Address of 0.0.0.0 matches all IP
|
|
addresses."
|
|
::= { agentSnmpCommunityConfigEntry 2 }
|
|
|
|
agentSnmpCommunityIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community
|
|
IP Mask Client IP Mask - This attribute is a mask
|
|
to be logical-ANDed with the requesting entity's
|
|
IP address before comparison with the Client IP
|
|
Address. If the result matches with Client IP
|
|
Address then the address is an authenticated IP
|
|
address. For example, if the Client IP Address
|
|
is 9.47.128.0 and the corresponding Client IP
|
|
Mask is 255.255.255.0, a range of incoming IP
|
|
addresses would match, that is, the incoming IP
|
|
addresses could be a value in the following
|
|
range: 9.47.128.0 to 9.47.128.255. To have a
|
|
specific IP address be the only authenticated IP
|
|
address, set the Client IP Address to the
|
|
required IP address and set the Client IP Mask to
|
|
255.255.255.255."
|
|
::= { agentSnmpCommunityConfigEntry 3 }
|
|
|
|
agentSnmpCommunityAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community Access Mode
|
|
Access Mode - This value can be readOnly or
|
|
readWrite. A community with a read-only access
|
|
allows for switch information to be displayed.
|
|
A community with a readWrite access allows for
|
|
configuration changes to be made and for
|
|
information to be displayed. "
|
|
DEFVAL {readOnly}
|
|
::= { agentSnmpCommunityConfigEntry 4 }
|
|
|
|
agentSnmpCommunityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If community is Enabled "
|
|
DEFVAL { no }
|
|
::= { agentSnmpCommunityConfigEntry 5 }
|
|
|
|
agentSnmpCommunityStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community Status.
|
|
active(1) - This community is active,
|
|
allowing SNMP manager
|
|
associated
|
|
with this community to manage
|
|
the switch according to its
|
|
access right.
|
|
|
|
notInService(2) - This community is not active;
|
|
no
|
|
SNMP requests using this
|
|
community will be accepted. In
|
|
this case the SNMP manager
|
|
associated with this community
|
|
cannot manage the switch until
|
|
the Status is changed back to
|
|
active(1).
|
|
|
|
config(3) - The community Status must be
|
|
set to this value in order to
|
|
configure it. When creating a
|
|
new community entry, initial
|
|
Status will be set to this
|
|
value.
|
|
|
|
destroy(4) - Set to this value to remove
|
|
the
|
|
community from the agent."
|
|
::= { agentSnmpCommunityConfigEntry 25 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSnmpTrapReceiverConfigTable
|
|
--********************************************************************
|
|
|
|
agentSnmpTrapReceiverConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSnmpTrapReceiverConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap messages are sent across a network to an SNMP
|
|
Network Manager. These messages alert the manager to
|
|
events occurring within the switch or on the network.
|
|
Up to six simultaneous trap receivers are supported."
|
|
::= { agentSnmpConfigGroup 6 }
|
|
|
|
agentSnmpTrapReceiverConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentSnmpTrapReceiverConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's Snmp Trap Receiver Config entry"
|
|
INDEX { agentSnmpTrapReceiverName }
|
|
::= { agentSnmpTrapReceiverConfigTable 1 }
|
|
|
|
AgentSnmpTrapReceiverConfigEntry ::= SEQUENCE {
|
|
agentSnmpTrapReceiverName OCTET STRING,
|
|
agentSnmpTrapReceiverIPAddress IpAddress,
|
|
agentSnmpTrapReceiverEnabled INTEGER,
|
|
agentSnmpTrapReceiverStatus RowStatus
|
|
}
|
|
|
|
agentSnmpTrapReceiverName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Trap Receiver Name.
|
|
This is the name of the remote network manager.
|
|
the name can be up to 16 characters,
|
|
and is case-sensitive."
|
|
::= { agentSnmpTrapReceiverConfigEntry 1 }
|
|
|
|
agentSnmpTrapReceiverIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP network Manager IP Address. The IP Address
|
|
traps will be sent to. Each IP address parameter
|
|
is four integer numbers. The numbers range from
|
|
0 to 255. After creation of entry IP Address
|
|
cannot be changed."
|
|
::= { agentSnmpTrapReceiverConfigEntry 2 }
|
|
|
|
agentSnmpTrapReceiverEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER{no(0),yes(1)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag to enable the trap receiver. If
|
|
disabled, no traps are sent to this receiver's
|
|
IP Address. "
|
|
DEFVAL{ no }
|
|
::= { agentSnmpTrapReceiverConfigEntry 3 }
|
|
|
|
agentSnmpTrapReceiverStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete instances
|
|
of this table.
|
|
The row, when created with the row status value
|
|
of 'createAndGo' or 'createAndWait' is moved to the
|
|
'active' state automatically by the agent and remains
|
|
in that state till the time the row is removed through
|
|
the 'destroy' option."
|
|
::= { agentSnmpTrapReceiverConfigEntry 23 }
|
|
|
|
--********************************************************************
|
|
-- agentSnmpTrapFlagsConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentSnmpConfigGroup 7 }
|
|
|
|
agentSnmpAuthenticationTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication Flag - Enable/Disable
|
|
authentication Flag."
|
|
::= { agentSnmpTrapFlagsConfigGroup 1 }
|
|
|
|
agentSnmpLinkUpDownTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link Up/Down Flag - Enable/Disable Link Up/Link
|
|
Down traps for the entire switch. When set to
|
|
Enable, the Link Up/Down traps will be sent only
|
|
if the Link Trap flag setting associated with
|
|
the port (Port Configuration Menu) is set to
|
|
Enable."
|
|
::= { agentSnmpTrapFlagsConfigGroup 2 }
|
|
|
|
agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiple Users Flag - Enable/Disable Multiple
|
|
User traps. When the value is set to Enable, a
|
|
Multiple User Trap is sent whenever someone logs
|
|
in to the terminal interface (EIA 232 or Telnet)
|
|
and there is already an existing terminal
|
|
interface session"
|
|
::= { agentSnmpTrapFlagsConfigGroup 3 }
|
|
|
|
agentSnmpSpanningTreeTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree Flag - This flag enables the
|
|
sending of new root traps and topology change
|
|
notification traps."
|
|
::= { agentSnmpTrapFlagsConfigGroup 4 }
|
|
|
|
agentSnmpBroadcastStormTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Broadcast Storm Flag - This flag enables or
|
|
disables the broadcast storm trap. You must also
|
|
enable Broadcast Storm Recovery Mode
|
|
(see the Switch Configuration Menu). When this
|
|
value is set to Enable and Broadcast Storm
|
|
Recovery mode is set to Enable, the Broadcast
|
|
Storm Start/End traps are sent when the switch
|
|
enters and leaves Broadcast Storm Recovery."
|
|
::= { agentSnmpTrapFlagsConfigGroup 5 }
|
|
|
|
--********************************************************************
|
|
-- agentSnmpV3ConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSnmpV3ConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 6}
|
|
|
|
|
|
agentSnmpVersion3Status OBJECT-TYPE
|
|
SYNTAX INTEGER{disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Version 3 Status"
|
|
::= { agentSnmpV3ConfigGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- agentSnmpV3UserConfigTable
|
|
--********************************************************************
|
|
|
|
agentSnmpV3UserConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSnmpV3UserConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Config Table. Only creation and deletion of
|
|
users is supported. All individual updates are
|
|
not supported."
|
|
::= { agentSnmpV3ConfigGroup 2 }
|
|
|
|
agentSnmpV3UserConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentSnmpV3UserConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Config Entry"
|
|
INDEX { agentSnmpV3UserName }
|
|
::= { agentSnmpV3UserConfigTable 1 }
|
|
|
|
AgentSnmpV3UserConfigEntry ::= SEQUENCE {
|
|
agentSnmpV3UserName OCTET STRING,
|
|
agentSnmpV3UserAccessMode INTEGER,
|
|
agentSnmpV3UserAuthenticationType INTEGER,
|
|
agentSnmpV3UserEncryptionType INTEGER,
|
|
agentSnmpV3UserAuthenticationPassword OCTET STRING,
|
|
agentSnmpV3UserEncryptionPassword OCTET STRING,
|
|
agentSnmpV3UserStatus RowStatus
|
|
}
|
|
|
|
agentSnmpV3UserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent User Name."
|
|
::= { agentSnmpV3UserConfigEntry 1 }
|
|
|
|
agentSnmpV3UserAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readonly(1),
|
|
readwrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent User Access Mode"
|
|
::= { agentSnmpV3UserConfigEntry 2 }
|
|
|
|
|
|
agentSnmpV3UserAuthenticationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
hmacmd5(2),
|
|
hmacsha(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Authentication
|
|
none(1) - no authentication used
|
|
hmacmd5(1) - Use HMAC-MD5 authentication
|
|
hmacsha(1) - Use HMAC-SHA authentication"
|
|
::= { agentSnmpV3UserConfigEntry 3 }
|
|
|
|
agentSnmpV3UserEncryptionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
des(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Encryption Must be set to none(1) if
|
|
agentSnmpV3UserAuthenticationType is set to
|
|
none(1). Setting this object will set the
|
|
encryption password to an empty string.
|
|
none(1) - no encryption used
|
|
des(1) - DES encryption used"
|
|
::= { agentSnmpV3UserConfigEntry 4 }
|
|
|
|
agentSnmpV3UserAuthenticationPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Encryption Password"
|
|
::= { agentSnmpV3UserConfigEntry 5 }
|
|
|
|
agentSnmpV3UserEncryptionPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Encryption Password"
|
|
::= { agentSnmpV3UserConfigEntry 6 }
|
|
|
|
agentSnmpV3UserStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent User Status.
|
|
active(1) - This user account is active.
|
|
destroy(6) - Set to this value to remove this
|
|
user account."
|
|
::= { agentSnmpV3UserConfigEntry 26 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSpanningTreePortTable
|
|
--********************************************************************
|
|
agentSpanningTreeConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentConfigGroup 7 }
|
|
|
|
|
|
agentSpanningTreeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Spanning Tree Switch Status"
|
|
::= { agentSpanningTreeConfigGroup 1 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSwitchConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSwitchConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 8
|
|
}
|
|
|
|
agentSwitchAddressAgingTimeoutTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchAddressAgingTimeoutEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's address aging timeout table"
|
|
::= { agentSwitchConfigGroup 4 }
|
|
|
|
agentSwitchAddressAgingTimeoutEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchAddressAgingTimeoutEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Aging information about a specific Filtering
|
|
Database."
|
|
INDEX { dot1qFdbId }
|
|
::= { agentSwitchAddressAgingTimeoutTable 1 }
|
|
|
|
AgentSwitchAddressAgingTimeoutEntry ::=
|
|
SEQUENCE {
|
|
agentSwitchAddressAgingTimeout
|
|
Integer32
|
|
}
|
|
|
|
agentSwitchAddressAgingTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FDB entry's address aging timeout(in
|
|
seconds)"
|
|
DEFVAL { 300 }
|
|
::= { agentSwitchAddressAgingTimeoutEntry 10 }
|
|
|
|
agentSwitchBroadcastControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch config broadcast allows you to enable
|
|
or disable broadcast storm recovery mode. When
|
|
you specify Enable for Broadcast Storm Recovery
|
|
and the broadcast traffic on any Ethernet port
|
|
exceeds 20 percent of the link speed, the switch
|
|
blocks (discards) the broadcast traffic until
|
|
the broadcast traffic returns to 10 percent or
|
|
less.Upper limit for 10M link is 20% and lower
|
|
limit is 10%. For 100M link Upper limit is 5%
|
|
and lower limit is 2%"
|
|
::= { agentSwitchConfigGroup 2 }
|
|
|
|
agentSwitchDot3FlowControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config switchconfig flowcontrol allows you to
|
|
enable or disable 802.3x flow control for the
|
|
switch. This value applies to only full-duplex
|
|
mode ports. "
|
|
::= { agentSwitchConfigGroup 3 }
|
|
|
|
agentSwitchLwappTransportMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer2(1),
|
|
layer3(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LWAPP transport mode decides if the switch
|
|
is operating in the Layer2 or Layer3 mode.
|
|
The switch needs to be rebooted for the mode
|
|
change to take effect."
|
|
::= { agentSwitchConfigGroup 5 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTransferConfigGroup
|
|
--********************************************************************
|
|
|
|
agentTransferConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentConfigGroup 9 }
|
|
|
|
|
|
--*******************************************************************
|
|
-- agentTransferUploadGroup
|
|
--*******************************************************************
|
|
|
|
agentTransferUploadGroup OBJECT IDENTIFIER ::=
|
|
{ agentTransferConfigGroup 1 }
|
|
|
|
agentTransferUploadMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
xmodem(2),
|
|
ymodem(3),
|
|
zmodem(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload mode configures the mode to use
|
|
when uploading from the switch. The mode is
|
|
either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
|
|
only when the file transfer is initiated by the
|
|
serial EIA 232 port."
|
|
::= { agentTransferUploadGroup 1 }
|
|
|
|
agentTransferUploadServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload tftpserverip configures the IP
|
|
address of the server where the file will be
|
|
uploaded. It is valid only when the Transfer
|
|
Mode is TFTP. The address is 4 integer bytes
|
|
ranging from 0 to 255."
|
|
::= { agentTransferUploadGroup 2 }
|
|
|
|
agentTransferUploadPath OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload tftppath configures the
|
|
directory
|
|
path where the file is to be uploaded to. The
|
|
switch remembers the last file path used."
|
|
::= { agentTransferUploadGroup 3 }
|
|
|
|
agentTransferUploadFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload tftpfilename configures the
|
|
file name for the file being uploaded from the
|
|
switch. It can be up to 32 alphanumeric
|
|
characters. The switch remembers the last file
|
|
name used. File path can be appended to the file
|
|
name if the string is less than 17 characters.
|
|
Otherwise, the File Path field will need to be
|
|
used and the File Name will be appended to the
|
|
File Path as is. An example would be File Path
|
|
set to c:\tftp\code\ and File Name set to
|
|
e1r1v1.opr.
|
|
Note: File Name, File Path, and TFTP Server IP
|
|
Address are applicable only if the Transfer Mode
|
|
is TFTP."
|
|
::= { agentTransferUploadGroup 4 }
|
|
|
|
agentTransferUploadDataType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(2),
|
|
errorlog(3),
|
|
systemtrace(4),
|
|
traplog(5),
|
|
crashfile(6),
|
|
signatures(7),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload datatype configures the type of
|
|
file to upload from the switch.
|
|
The types for upload are:
|
|
- Configuration File
|
|
- Error log
|
|
- System trace
|
|
- Trap log
|
|
- Crash File
|
|
"
|
|
::= { agentTransferUploadGroup 5 }
|
|
|
|
|
|
agentTransferUploadStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload start will start an upload
|
|
transfer. The agentTransferUploadMode object
|
|
must not be set to xmodem(2), ymodem(3), or
|
|
zmodem(4) to initiate a transfer via SNMP."
|
|
::= { agentTransferUploadGroup 6 }
|
|
|
|
agentTransferUploadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notInitiated(1),
|
|
transferStarting(2),
|
|
errorStarting(3),
|
|
wrongFileType(4),
|
|
updatingConfig(5),
|
|
invalidConfigFile(6),
|
|
writingToFlash(7),
|
|
failureWritingToFlash(8),
|
|
checkingCRC(9),
|
|
failedCRC(10),
|
|
unknownDirection(11),
|
|
transferSuccessful(12),
|
|
transferFailed(13),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current status of an upload
|
|
transfer."
|
|
::= { agentTransferUploadGroup 7 }
|
|
|
|
agentTransferConfigurationFileEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration file can be encrypted before
|
|
tftp upload from the switch and then decrypted
|
|
before downloading to the switch when this
|
|
option is enabled."
|
|
::= { agentTransferConfigGroup 3 }
|
|
|
|
agentTransferConfigurationFileEncryptionKey OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the key to be used when encrypting the
|
|
configuration file while upload from the switch
|
|
or while decrypting the file after download to
|
|
the switch."
|
|
::= { agentTransferConfigGroup 4 }
|
|
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTransferDownloadGroup
|
|
--********************************************************************
|
|
|
|
agentTransferDownloadGroup OBJECT IDENTIFIER ::=
|
|
{ agentTransferConfigGroup 2 }
|
|
|
|
agentTransferDownloadMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
xmodem(2),
|
|
ymodem(3),
|
|
zmodem(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download mode configures the mode to
|
|
use when downloading to the switch. The mode is
|
|
either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
|
|
only when the file transfer is initiated by the
|
|
serial EIA 232 port."
|
|
::= { agentTransferDownloadGroup 1 }
|
|
|
|
agentTransferDownloadServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download tftpserverip configures the IP
|
|
address of the server where the file is located.
|
|
It is valid only when the Transfer Mode is TFTP.
|
|
The address is 4 integer bytes ranging from 0 to
|
|
255."
|
|
::= { agentTransferDownloadGroup 2 }
|
|
|
|
agentTransferDownloadPath OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download tftppath configures the
|
|
directory path where the file is located. The
|
|
switch remembers the last file path used."
|
|
::= { agentTransferDownloadGroup 3 }
|
|
|
|
agentTransferDownloadFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download tftpfilename configures the
|
|
file name for the file being downloaded to the
|
|
switch. It can be up to 32 alphanumeric
|
|
characters. The switch remembers the last file
|
|
name used. File path can be appended to the
|
|
file name if the string is less than 33
|
|
characters. Otherwise, the File Path field will
|
|
need to be used and the File Name will be
|
|
appended to the File Path as is. An example
|
|
would be File Path set to c:\tftp\code\
|
|
and File Name set to e1r1v1.opr. Note: File
|
|
Name, File Path, and TFTP Server IP Address are
|
|
applicable only if the Transfer Mode is TFTP."
|
|
|
|
::= { agentTransferDownloadGroup 4 }
|
|
|
|
agentTransferDownloadDataType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
code(2),
|
|
config(3),
|
|
webauthcert(4),
|
|
webadmincert(5),
|
|
signatures(6),
|
|
customWebAuth(7),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download datatype configures the type
|
|
of file to downloaded to the switch.
|
|
The types for download are:
|
|
- Code
|
|
- Configuration
|
|
- Certificates
|
|
- Signatures
|
|
- customWebauth- custom webauth tar ball"
|
|
::= { agentTransferDownloadGroup 5 }
|
|
|
|
|
|
agentTransferDownloadStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download start will start an download
|
|
transfer. The agentTransferDownloadMode object
|
|
must not be set to xmodem(2), ymodem(3), or
|
|
zmodem(4) to initiate a transfer via SNMP."
|
|
::= { agentTransferDownloadGroup 6 }
|
|
|
|
agentTransferDownloadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notInitiated(1),
|
|
transferStarting(2),
|
|
errorStarting(3),
|
|
wrongFileType(4),
|
|
updatingConfig(5),
|
|
invalidConfigFile(6),
|
|
writingToFlash(7),
|
|
failureWritingToFlash(8),
|
|
checkingCRC(9),
|
|
failedCRC(10),
|
|
unknownDirection(11),
|
|
transferSuccessful(12),
|
|
transferFailed(13),
|
|
bootBreakOff(14),
|
|
invalidTarFile(15),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current status of an download
|
|
transfer."
|
|
::= { agentTransferDownloadGroup 7 }
|
|
|
|
agentTransferDownloadTftpMaxRetries OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of retries to be allowed for a
|
|
TFTP message packet."
|
|
DEFVAL{ 10 }
|
|
::= { agentTransferDownloadGroup 8 }
|
|
|
|
agentTransferDownloadTftpTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timeout in seconds for a TFTP message packet."
|
|
DEFVAL{ 6 }
|
|
::= { agentTransferDownloadGroup 9 }
|
|
|
|
--********************************************************************
|
|
-- agentDot3adAggPortTable
|
|
--********************************************************************
|
|
|
|
agentDot3adAggPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDot3adAggPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This table provides 802.3ad link aggregation
|
|
information for each physical port that is not
|
|
available through the standard MIB."
|
|
::= { agentConfigGroup 11 }
|
|
|
|
agentDot3adAggPortEntry OBJECT-TYPE
|
|
SYNTAX AgentDot3adAggPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Information about a table entry. The
|
|
agentDot3adAggPort identifies the external
|
|
interface number of the port."
|
|
INDEX { agentDot3adAggPort }
|
|
::= { agentDot3adAggPortTable 1 }
|
|
|
|
AgentDot3adAggPortEntry ::= SEQUENCE {
|
|
agentDot3adAggPort Integer32,
|
|
agentDot3adAggPortLACPMode INTEGER
|
|
}
|
|
|
|
agentDot3adAggPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"ifIndex of this physical port"
|
|
::= { agentDot3adAggPortEntry 1 }
|
|
|
|
agentDot3adAggPortLACPMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Enable/disable 802.3ad LACP on this port"
|
|
::= { agentDot3adAggPortEntry 21 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentPortConfigTable
|
|
--
|
|
--********************************************************************
|
|
|
|
agentPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's physical port config
|
|
entries"
|
|
::= { agentConfigGroup 12 }
|
|
|
|
agentPortConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's physical port config entry"
|
|
INDEX { agentPortDot1dBasePort }
|
|
::= { agentPortConfigTable 1 }
|
|
|
|
AgentPortConfigEntry ::= SEQUENCE {
|
|
agentPortDot1dBasePort Integer32,
|
|
agentPortIfIndex Integer32,
|
|
agentPortIanaType IANAifType,
|
|
agentPortSTPMode INTEGER,
|
|
agentPortSTPState INTEGER,
|
|
agentPortAdminMode INTEGER,
|
|
agentPortPhysicalMode INTEGER,
|
|
agentPortPhysicalStatus INTEGER,
|
|
agentPortLinkTrapMode INTEGER,
|
|
agentPortClearStats INTEGER,
|
|
agentPortDefaultType OBJECT IDENTIFIER,
|
|
agentPortType OBJECT IDENTIFIER,
|
|
agentPortAutoNegAdminStatus INTEGER,
|
|
agentPortDot3FlowControlMode INTEGER,
|
|
agentPortPowerMode INTEGER,
|
|
agentPortGvrpStatus INTEGER,
|
|
agentPortGarpJoinTime Unsigned32,
|
|
agentPortGarpLeaveTime Unsigned32,
|
|
agentPortGarpLeaveAllTime Unsigned32,
|
|
agentPortMirrorMode INTEGER,
|
|
agentPortMulticastApplianceMode INTEGER,
|
|
agentPortOperationalStatus INTEGER
|
|
}
|
|
|
|
agentPortDot1dBasePort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of this port."
|
|
::= { agentPortConfigEntry 1 }
|
|
|
|
agentPortIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port IfIndex"
|
|
::= { agentPortConfigEntry 2 }
|
|
|
|
agentPortIanaType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Type"
|
|
::= { agentPortConfigEntry 3 }
|
|
|
|
agentPortSTPMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1d(1),
|
|
fast(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Spanning Tree Protocol Mode
|
|
STP mode values are:
|
|
dot1d (the default)
|
|
fast, indicates you want to use the fast
|
|
spanning tree mode
|
|
off, indicates the STP mode is turned off for a
|
|
particular port"
|
|
::= { agentPortConfigEntry 4 }
|
|
|
|
agentPortSTPState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocking(1),
|
|
listening(2),
|
|
learning(3),
|
|
forwarding(4),
|
|
disabled(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Spanning Tree Protocol State"
|
|
::= { agentPortConfigEntry 5 }
|
|
|
|
agentPortAdminMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Admin Mode"
|
|
::= { agentPortConfigEntry 6 }
|
|
|
|
agentPortPhysicalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoNegotiate(1),
|
|
half10(2),
|
|
full10(3),
|
|
half100(4),
|
|
full100(5),
|
|
full1000sx(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Speed Mode. This is the
|
|
configured physical mode.This object is
|
|
read-only for gigabit ports"
|
|
::= { agentPortConfigEntry 7 }
|
|
|
|
agentPortPhysicalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autonegotiate(1),
|
|
half10(2),
|
|
full10(3),
|
|
half100(4),
|
|
full100(5),
|
|
full1000sx(8),
|
|
unknown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Physical Speed Status.This
|
|
is the current actual speed."
|
|
::= { agentPortConfigEntry 8 }
|
|
|
|
agentPortLinkTrapMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, link up and link down traps will be
|
|
sent for this port."
|
|
::= { agentPortConfigEntry 9 }
|
|
|
|
agentPortClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear stats for this port only"
|
|
::= { agentPortConfigEntry 10 }
|
|
|
|
agentPortDefaultType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the default administrative
|
|
port type, to be used in conjunction with the
|
|
operational port type denoted by agentPortType.
|
|
|
|
The set of possible values for this object is
|
|
the same as the set defined for the agentPortType
|
|
object.
|
|
|
|
This object represents the administratively-
|
|
configured
|
|
type of the MAU. If auto-negotiation is not enabled
|
|
or is not implemented for this MAU, the value of
|
|
this object determines the operational type of the
|
|
MAU. In this case, a set to this object will force
|
|
the MAU into the specified operating mode.
|
|
|
|
If auto-negotiation is implemented and enabled for
|
|
this MAU, the operational type of the MAU is
|
|
determined by auto-negotiation, and the value of
|
|
this object denotes the type to which the MAU will
|
|
automatically revert if/when auto-negotiation is
|
|
later disabled.
|
|
|
|
The valid values for this object are:
|
|
dot3MauType10BaseTHD
|
|
dot3MauType10BaseTFD
|
|
dot3MauType100BaseTXHD
|
|
dot3MauType100BaseTXFD
|
|
dot3MauType100BaseFXFD
|
|
dot3MauType1000BaseSXFD"
|
|
|
|
REFERENCE "RFC 2668"
|
|
::= { agentPortConfigEntry 11 }
|
|
|
|
agentPortType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the port type.
|
|
An initial set of MAU types are defined in RFC 2668.
|
|
The assignment of OBJECT IDENTIFIERs to new types of
|
|
MAUs is managed by the IANA.
|
|
|
|
If the MAU type is unknown, the object identifier
|
|
unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
|
|
is returned. Note that unknownMauType is a
|
|
syntactically valid object identifier, and any
|
|
conformant implementation of ASN.1 and the BER must
|
|
be able to generate and recognize this value.
|
|
This object represents the operational type of the
|
|
MAU, as determined by either (1) the result of the
|
|
auto-negotiation function or (2) if auto-negotiation
|
|
is not enabled or is not implemented for this MAU,
|
|
by the value of the object qbEnetDefaultType, or (3)
|
|
for the GigE card a value determined by the GBIC
|
|
connected to the card. In case (2), a set to the
|
|
object qbEnetPortDefaultType will force the MAU into
|
|
the new operating mode.
|
|
|
|
The valid values for this object are:
|
|
|
|
dot3MauType10BaseTHD
|
|
dot3MauType10BaseTFD
|
|
dot3MauType100BaseTXHD
|
|
dot3MauType100BaseTXFD
|
|
dot3MauType100BaseFXFD
|
|
dot3MauType1000BaseSXFD"
|
|
|
|
REFERENCE "RFC 2668"
|
|
::= { agentPortConfigEntry 12 }
|
|
|
|
agentPortAutoNegAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the administration status of
|
|
auto negotiation for this port."
|
|
::= { agentPortConfigEntry 13 }
|
|
|
|
|
|
agentPortDot3FlowControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config flowcontrol allows you to enable or
|
|
disable 802.3x flow control for this port. This
|
|
value applies to only full-duplex mode ports."
|
|
::= { agentPortConfigEntry 14 }
|
|
|
|
agentPortPowerMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable/Disable the port's Power over ethernet. This doesn't
|
|
apply to appliances that have no POE controller."
|
|
::= { agentPortConfigEntry 15 }
|
|
|
|
agentPortGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The state of GVRP operation on this port. The value
|
|
enabled(1) indicates that GVRP is enabled on this port,
|
|
as long as dot1qGvrpStatus is also enabled for this
|
|
device. When disabled(2) but dot1qGvrpStatus is still
|
|
enabled for the device, GVRP is disabled on this port:
|
|
any GVRP packets received will be silently discarded and
|
|
no GVRP registrations will be propagated from other
|
|
ports. This object affects all GVRP Applicant and
|
|
Registrar state machines on this port. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on this port.(Attribute no longer
|
|
supported)"
|
|
DEFVAL { enabled }
|
|
::= { agentPortConfigEntry 16 }
|
|
|
|
agentPortGarpJoinTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The GARP Join time, in centiseconds.(Attribute no longer
|
|
supported)"
|
|
DEFVAL { 20 }
|
|
::= { agentPortConfigEntry 17 }
|
|
|
|
agentPortGarpLeaveTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The GARP Leave time, in centiseconds.(Attribute no
|
|
longer supported)"
|
|
DEFVAL { 60 }
|
|
::= { agentPortConfigEntry 18 }
|
|
|
|
agentPortGarpLeaveAllTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The GARP LeaveAll time, in centiseconds.(Attribute no
|
|
longer supported)"
|
|
DEFVAL { 1000 }
|
|
::= { agentPortConfigEntry 19 }
|
|
|
|
agentPortMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Mirror Mode. If enabled, then
|
|
this is the port that the packets are mirrored
|
|
to."
|
|
::= { agentPortConfigEntry 20 }
|
|
|
|
agentPortMulticastApplianceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Multicast Appliance Mode. If enabled,
|
|
then this port allows multicast streams through
|
|
it. At a time, a maximum of four ports including
|
|
the gigabit ethernet port can have this mode
|
|
enabled on them. This is to limit the number of
|
|
multicast streams allowed through the switch
|
|
at a given time."
|
|
::= { agentPortConfigEntry 21 }
|
|
|
|
agentPortOperationalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the port."
|
|
::= { agentPortConfigEntry 40 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSystemGroup
|
|
--********************************************************************
|
|
|
|
agentSaveConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"save config to NVRAM"
|
|
::= { agentSystemGroup 1 }
|
|
|
|
agentClearConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear config to factory defaults"
|
|
::= { agentSystemGroup 2 }
|
|
|
|
agentClearLags OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear lag configuration"
|
|
::= { agentSystemGroup 3 }
|
|
|
|
agentClearLoginSessions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"close all telnet sessions"
|
|
::= { agentSystemGroup 4 }
|
|
|
|
agentClearPortStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear all port statistics"
|
|
::= { agentSystemGroup 6 }
|
|
|
|
agentClearSwitchStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear all switch statistics"
|
|
::= { agentSystemGroup 7 }
|
|
|
|
agentClearTrapLog OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear trap log"
|
|
::= { agentSystemGroup 8 }
|
|
|
|
|
|
agentResetSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"reset the switch"
|
|
::= { agentSystemGroup 10 }
|
|
|
|
|
|
--********************************************************************
|
|
-- portStatsTable
|
|
-- Enterprise portion of Ethernet Statistics Group
|
|
-- This augments the etherStatsTable of RMON group.
|
|
--********************************************************************
|
|
|
|
portStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of additional thernet statistics entries."
|
|
::= { stats 1 }
|
|
|
|
portStatsEntry OBJECT-TYPE
|
|
SYNTAX PortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of statistics kept for a particular Ethernet
|
|
interface."
|
|
INDEX { portStatsIndex }
|
|
::= { portStatsTable 1 }
|
|
|
|
PortStatsEntry ::= SEQUENCE {
|
|
portStatsIndex Integer32,
|
|
portStatsPktsTx64Octets Counter32,
|
|
portStatsPktsTx65to127Octets Counter32,
|
|
portStatsPktsTx128to255Octets Counter32,
|
|
portStatsPktsTx256to511Octets Counter32,
|
|
portStatsPktsTx512to1023Octets Counter32,
|
|
portStatsPktsTx1024to1518Octets Counter32,
|
|
portStatsPktsRx1519to1530Octets Counter32,
|
|
portStatsPktsTx1519to1530Octets Counter32,
|
|
portStatsPktsTxOversizeOctets Counter32
|
|
}
|
|
|
|
portStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies
|
|
this portStatsEntry."
|
|
::= { portStatsEntry 1 }
|
|
|
|
portStatsPktsTx64Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were 64 octets in length
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 2 }
|
|
|
|
portStatsPktsTx65to127Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
65 and 127 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 3 }
|
|
|
|
portStatsPktsTx128to255Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
128 and 255 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 4 }
|
|
|
|
portStatsPktsTx256to511Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
256 and 511 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 5 }
|
|
|
|
portStatsPktsTx512to1023Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
512 and 1023 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 6 }
|
|
|
|
portStatsPktsTx1024to1518Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
1024 and 1518 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 7 }
|
|
|
|
portStatsPktsRx1519to1530Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
1519 and 1530 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 8 }
|
|
|
|
portStatsPktsTx1519to1530Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
1519 and 1530 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 9 }
|
|
|
|
|
|
portStatsPktsTxOversizeOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were more than
|
|
1530 octets in length.
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 30 }
|
|
|
|
|
|
--********************************************************************
|
|
-- switchingTraps
|
|
--********************************************************************
|
|
|
|
multipleUsersTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiple Users Log Trap."
|
|
::= { switchingTraps 1 }
|
|
|
|
broadcastStormStartTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm Start Log Trap."
|
|
::= { switchingTraps 2 }
|
|
|
|
broadcastStormEndTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm End Log Trap."
|
|
::= { switchingTraps 3 }
|
|
|
|
linkFailureTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"trapMgrLinkFailureLogTrap."
|
|
::= { switchingTraps 4 }
|
|
|
|
vlanRequestFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan Request Failure Log Trap"
|
|
::= { switchingTraps 5 }
|
|
|
|
vlanDeleteLastTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last Vlan Delete Log Trap"
|
|
::= { switchingTraps 6 }
|
|
|
|
vlanDefaultCfgFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default Vlan Config Failure Log Trap"
|
|
::= { switchingTraps 7 }
|
|
|
|
vlanRestoreFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan Restore Failure Log Trap"
|
|
::= { switchingTraps 8 }
|
|
|
|
fanFailureTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan Failure Log Trap."
|
|
::= { switchingTraps 9 }
|
|
|
|
stpInstanceNewRootTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP Instance New Root Trap"
|
|
::= { switchingTraps 10 }
|
|
|
|
stpInstanceTopologyChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP Instance Topology Change Trap"
|
|
::= { switchingTraps 11 }
|
|
|
|
powerSupplyStatusChangeTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power Supply Status Change Trap"
|
|
::= { switchingTraps 12 }
|
|
|
|
|
|
--********************************************************************
|
|
--* Compliance statements
|
|
--********************************************************************
|
|
bsnSwitchingCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the bsnSwitching module"
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS { bsnSwitchingAgentInfoGroup,
|
|
bsnSwitchingAgentConfigGroup,
|
|
bsnSwitchingAgentSystemGroup,
|
|
bsnSwitchingAgentStatsGroup }
|
|
::= { bsnSwitchingCompliances 1 }
|
|
|
|
--********************************************************************
|
|
--* Units of conformance
|
|
--********************************************************************
|
|
bsnSwitchingAgentInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentInventorySysDescription,
|
|
agentInventoryMachineType,
|
|
agentInventoryMachineModel,
|
|
agentInventorySerialNumber,
|
|
agentInventoryMaintenanceLevel,
|
|
agentInventoryBurnedInMacAddress,
|
|
agentInventoryOperatingSystem,
|
|
agentInventoryManufacturerName,
|
|
agentInventoryProductName,
|
|
agentInventoryProductVersion,
|
|
agentInventoryIsGigECardPresent,
|
|
agentInventoryIsCryptoCardPresent,
|
|
agentInventoryIsForeignAPSupported,
|
|
agentInventoryMaxNumberOfAPsSupported,
|
|
agentInventoryIsCryptoCard2Present,
|
|
agentInventoryFipsModeEnabled,
|
|
agentTrapLogTotal,
|
|
agentTrapLogTotalSinceLastViewed,
|
|
agentTrapLogIndex,
|
|
agentTrapLogSystemTime,
|
|
agentTrapLogTrap,
|
|
agentRadioUpDownTrapCount,
|
|
agentApAssociateDisassociateTrapCount,
|
|
agentApLoadProfileFailTrapCount,
|
|
agentApNoiseProfileFailTrapCount,
|
|
agentApInterferenceProfileFailTrapCount,
|
|
agentApCoverageProfileFailTrapCount,
|
|
agentSwitchInfoLwappTransportMode,
|
|
agentSwitchInfoPowerSupply1Present,
|
|
agentSwitchInfoPowerSupply1Operational,
|
|
agentSwitchInfoPowerSupply2Present,
|
|
agentSwitchInfoPowerSupply2Operational,
|
|
agentCurrentCPUUtilization,
|
|
agentTotalMemory,
|
|
agentFreeMemory,
|
|
agentWcpDeviceName,
|
|
agentWcpSlotNumber,
|
|
agentWcpPortNumber,
|
|
agentWcpPeerPortNumber,
|
|
agentWcpPeerIpAddress,
|
|
agentWcpControllerTableChecksum,
|
|
agentWcpControllerInfoSlotNumber,
|
|
agentWcpControllerInfoPortNumber,
|
|
agentWcpControllerInfoIpAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching information."
|
|
::= { bsnSwitchingGroups 1}
|
|
|
|
|
|
bsnSwitchingAgentConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentLoginSessionIndex,
|
|
agentLoginSessionUserName,
|
|
agentLoginSessionIPAddress,
|
|
agentLoginSessionConnectionType,
|
|
agentLoginSessionIdleTime,
|
|
agentLoginSessionSessionTime,
|
|
agentLoginSessionStatus,
|
|
agentTelnetLoginTimeout,
|
|
agentTelnetMaxSessions,
|
|
agentTelnetAllowNewMode,
|
|
agentSSHAllowNewMode,
|
|
agentSerialTimeout,
|
|
agentSerialBaudrate,
|
|
agentSerialCharacterSize,
|
|
agentSerialHWFlowControlMode,
|
|
agentSerialStopBits,
|
|
agentSerialParityType,
|
|
agentNetworkIPAddress,
|
|
agentNetworkSubnetMask,
|
|
agentNetworkDefaultGateway,
|
|
agentNetworkBurnedInMacAddress,
|
|
agentNetworkConfigProtocol,
|
|
agentNetworkWebMode,
|
|
agentNetworkSecureWebMode,
|
|
agentNetworkMulticastMode,
|
|
agentNetworkDsPortNumber,
|
|
agentNetworkUserIdleTimeout,
|
|
agentNetworkArpTimeout,
|
|
agentNetworkManagementVlan,
|
|
agentNetworkAllowMgmtViaWireless,
|
|
agentNetworkBroadcastSsidMode,
|
|
agentNetworkSecureWebPassword,
|
|
agentNetworkWebAdminCertType,
|
|
agentNetworkWebAuthCertRegenerateCmdInvoke,
|
|
agentNetworkWebAdminCertRegenerateCmdInvoke,
|
|
agentNetworkWebAuthCertType,
|
|
agentNetworkRouteIPAddress,
|
|
agentNetworkRouteIPNetmask,
|
|
agentNetworkRouteGateway,
|
|
agentNetworkRouteStatus,
|
|
agentNetworkPeerToPeerBlockingMode,
|
|
agentNetworkMulticastGroupAddress,
|
|
agentInterfaceName,
|
|
agentInterfaceVlanId,
|
|
agentInterfaceType,
|
|
agentInterfaceMacAddress,
|
|
agentInterfaceIPAddress,
|
|
agentInterfaceIPNetmask,
|
|
agentInterfaceIPGateway,
|
|
agentInterfacePortNo,
|
|
agentInterfacePrimaryDhcpAddress,
|
|
agentInterfaceSecondaryDhcpAddress,
|
|
agentInterfaceDhcpProtocol,
|
|
agentInterfaceDnsHostName,
|
|
agentInterfaceAclName,
|
|
agentInterfaceAPManagementFeature,
|
|
agentInterfaceActivePortNo,
|
|
agentInterfaceBackupPortNo,
|
|
agentInterfaceVlanQuarantine,
|
|
agentInterfaceRowStatus,
|
|
agentNtpPollingInterval,
|
|
agentNtpServerIndex,
|
|
agentNtpServerAddress,
|
|
agentNtpServerRowStatus,
|
|
agentDhcpScopeIndex,
|
|
agentDhcpScopeName,
|
|
agentDhcpScopeLeaseTime,
|
|
agentDhcpScopeNetwork,
|
|
agentDhcpScopeNetmask,
|
|
agentDhcpScopePoolStartAddress,
|
|
agentDhcpScopePoolEndAddress,
|
|
agentDhcpScopeDefaultRouterAddress1,
|
|
agentDhcpScopeDefaultRouterAddress2,
|
|
agentDhcpScopeDefaultRouterAddress3,
|
|
agentDhcpScopeDnsDomainName,
|
|
agentDhcpScopeDnsServerAddress1,
|
|
agentDhcpScopeDnsServerAddress2,
|
|
agentDhcpScopeDnsServerAddress3,
|
|
agentDhcpScopeNetbiosNameServerAddress1,
|
|
agentDhcpScopeNetbiosNameServerAddress2,
|
|
agentDhcpScopeNetbiosNameServerAddress3,
|
|
agentDhcpScopeState,
|
|
agentDhcpScopeRowStatus,
|
|
agentSnmpTrapPortNumber,
|
|
agentSnmpVersion1Status,
|
|
agentSnmpVersion2cStatus,
|
|
agentSnmpCommunityName,
|
|
agentSnmpCommunityIPAddress,
|
|
agentSnmpCommunityIPMask,
|
|
agentSnmpCommunityAccessMode,
|
|
agentSnmpCommunityEnabled,
|
|
agentSnmpCommunityStatus,
|
|
agentSnmpTrapReceiverName,
|
|
agentSnmpTrapReceiverIPAddress,
|
|
agentSnmpTrapReceiverEnabled,
|
|
agentSnmpTrapReceiverStatus,
|
|
agentSnmpAuthenticationTrapFlag,
|
|
agentSnmpLinkUpDownTrapFlag,
|
|
agentSnmpMultipleUsersTrapFlag,
|
|
agentSnmpSpanningTreeTrapFlag,
|
|
agentSnmpVersion3Status,
|
|
agentSnmpV3UserName,
|
|
agentSnmpV3UserAccessMode,
|
|
agentSnmpV3UserAuthenticationType,
|
|
agentSnmpV3UserEncryptionType,
|
|
agentSnmpV3UserAuthenticationPassword,
|
|
agentSnmpV3UserEncryptionPassword,
|
|
agentSnmpV3UserStatus,
|
|
agentSpanningTreeMode,
|
|
agentSwitchAddressAgingTimeout,
|
|
agentSwitchBroadcastControlMode,
|
|
agentSwitchDot3FlowControlMode,
|
|
agentSwitchLwappTransportMode,
|
|
agentTransferUploadMode,
|
|
agentTransferUploadServerIP,
|
|
agentTransferUploadPath,
|
|
agentTransferUploadFilename,
|
|
agentTransferUploadDataType,
|
|
agentTransferUploadStart,
|
|
agentTransferUploadStatus,
|
|
agentTransferConfigurationFileEncryption,
|
|
agentTransferConfigurationFileEncryptionKey,
|
|
agentTransferDownloadMode,
|
|
agentTransferDownloadServerIP,
|
|
agentTransferDownloadPath,
|
|
agentTransferDownloadFilename,
|
|
agentTransferDownloadDataType,
|
|
agentTransferDownloadStart,
|
|
agentTransferDownloadStatus,
|
|
agentTransferDownloadTftpMaxRetries,
|
|
agentTransferDownloadTftpTimeout,
|
|
agentPortDot1dBasePort,
|
|
agentPortIfIndex,
|
|
agentPortIanaType,
|
|
agentPortSTPMode,
|
|
agentPortSTPState,
|
|
agentPortAdminMode,
|
|
agentPortPhysicalMode,
|
|
agentPortPhysicalStatus,
|
|
agentPortLinkTrapMode,
|
|
agentPortClearStats,
|
|
agentPortDefaultType,
|
|
agentPortType,
|
|
agentPortAutoNegAdminStatus,
|
|
agentPortDot3FlowControlMode,
|
|
agentPortPowerMode,
|
|
agentPortMirrorMode,
|
|
agentPortMulticastApplianceMode,
|
|
agentPortOperationalStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching configuration
|
|
information."
|
|
::= { bsnSwitchingGroups 2}
|
|
|
|
bsnSwitchingAgentSystemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentSaveConfig,
|
|
agentClearConfig,
|
|
agentClearLags,
|
|
agentClearLoginSessions,
|
|
agentClearPortStats,
|
|
agentClearSwitchStats,
|
|
agentClearTrapLog,
|
|
agentResetSystem
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching system
|
|
information and config."
|
|
::= { bsnSwitchingGroups 3 }
|
|
|
|
|
|
bsnSwitchingAgentStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
portStatsIndex,
|
|
portStatsPktsTx64Octets,
|
|
portStatsPktsTx65to127Octets,
|
|
portStatsPktsTx128to255Octets,
|
|
portStatsPktsTx256to511Octets,
|
|
portStatsPktsTx512to1023Octets,
|
|
portStatsPktsTx1024to1518Octets,
|
|
portStatsPktsRx1519to1530Octets,
|
|
portStatsPktsTx1519to1530Octets,
|
|
portStatsPktsTxOversizeOctets
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching statistics."
|
|
::= { bsnSwitchingGroups 4 }
|
|
|
|
bsnSwitchingObsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentLagConfigCreate,
|
|
agentLagSummaryName,
|
|
agentLagSummaryLagIndex,
|
|
agentLagSummaryLinkTrap,
|
|
agentLagSummaryAdminMode,
|
|
agentLagSummaryStpMode,
|
|
agentLagSummaryAddPort,
|
|
agentLagSummaryDeletePort,
|
|
agentLagSummaryPortsBitMask,
|
|
agentLagSummaryStatus,
|
|
agentLagDetailedLagIndex,
|
|
agentLagDetailedIfIndex,
|
|
agentLagDetailedPortSpeed,
|
|
agentLagConfigMode,
|
|
agentServicePortIPAddress,
|
|
agentServicePortSubnetMask,
|
|
agentServicePortBurnedInMacAddress,
|
|
agentServicePortConfigProtocol,
|
|
agentSnmpBroadcastStormTrapFlag,
|
|
agentDot3adAggPort,
|
|
agentDot3adAggPortLACPMode,
|
|
agentNetworkGvrpStatus,
|
|
agentPortGvrpStatus,
|
|
agentPortGarpJoinTime,
|
|
agentPortGarpLeaveTime,
|
|
agentPortGarpLeaveAllTime,
|
|
agentLagSummaryFlushTimer,
|
|
agentServicePortDefaultGateway
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This collection of objects are obsoleted in bsnSwitching
|
|
module."
|
|
::= { bsnSwitchingGroups 5 }
|
|
|
|
bsnSwitchingTrap NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
multipleUsersTrap,
|
|
broadcastStormStartTrap,
|
|
broadcastStormEndTrap,
|
|
linkFailureTrap,
|
|
vlanRequestFailureTrap,
|
|
vlanDeleteLastTrap,
|
|
vlanDefaultCfgFailureTrap,
|
|
vlanRestoreFailureTrap,
|
|
fanFailureTrap,
|
|
stpInstanceNewRootTrap,
|
|
stpInstanceTopologyChangeTrap,
|
|
powerSupplyStatusChangeTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provides switching related
|
|
notification."
|
|
::= { bsnSwitchingGroups 6 }
|
|
|
|
--********************************************************************
|
|
--* End of units of conformance
|
|
--********************************************************************
|
|
|
|
|
|
END
|
|
|