mibs/MIBS/cisco/CISCO-AAA-SERVER-MIB
2023-12-05 12:25:34 +01:00

1032 lines
28 KiB
Plaintext

-- *****************************************************************
-- CISCO-AAA-SERVER-MIB.my: Cisco AAA Server MIB file.
--
-- Copyright (c) 1999-2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-AAA-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Counter32,
IpAddress, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeInterval, DisplayString,
TruthValue, RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ciscoExperiment
FROM CISCO-SMI;
ciscoAAAServerMIB MODULE-IDENTITY
LAST-UPDATED "200311170000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aaa@cisco.com"
DESCRIPTION
"The MIB module for monitoring communications and status
of AAA Server operation
"
REVISION "200311170000Z"
DESCRIPTION
"Expanded the list of AAA protocols to include LDAP,
Kerberos, NTLM and SDI; defined textual convention
CiscoAAAProtocol to denote the type of AAA protocols.
"
REVISION "200203280000Z"
DESCRIPTION
"Imported Unsigned32 from SNMPv2-SMI instead of
CISCO-TC"
REVISION "200001200000Z"
DESCRIPTION
"Added objects to support AAA server configuration
casConfigTable
casProtocol
casIndex
casAddress
casAuthenPort
casAcctPort
casConfigRowStatus
"
::= { ciscoExperiment 56 }
-- Overview of AAA Server MIB
--
-- MIB description
--
--
-- This MIB provides configuration and statistics reflecting the state
-- of AAA Server operation within the device and AAA communications
-- with external servers.
--
-- AAA stands for authentication, authorization, and accounting
--
-- The AAA Server MIB provides the following information:
-- 1) A Table for configuring AAA servers
-- 2) Identities of external AAA servers
-- 3) Distinct statistics for each AAA function
-- 4) Status of servers providing AAA functions
--
-- A server is defined as a logical entity which provides any
-- of the three AAA functions. A TACACS+ server consists of
-- all three functions with a single IP address and single TCP
-- port. A RADIUS server consists of the authentication/accounting
-- pair with a single IP address but distinct UDP ports, or
-- it may be just one of authentication or accounting. It is
-- possible to have two distinct RADIUS servers at the same IP
-- address, one providing authentication only, the other accounting
-- only.
--
-- +++++++++++++++++++++++++++++++++++++++++++++++++++
-- Local Textual Conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++
CiscoAAAProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Protocol used with this server.
tacacsplus(1) - TACACS+
radius(2) - RADIUS
ldap(3) - Light Weight Directory Protocol
kerberos(4) - Kerberos
ntlm(5) - Authentication/Authorization using
NT Domain
sdi(6) - Authentication/Authorization using
Secure ID
other(7) - Other protocols
"
REFERENCE
"
RFC 2138 Remote Authentication Dial In User Service
(RADIUS)
RFC 2139 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft
"
SYNTAX INTEGER {
tacacsplus(1),
radius(2),
ldap(3),
kerberos(4),
ntlm(5),
sdi(6),
other(7)
}
-- AAA Server MIB object definitions
cAAAServerMIBObjects OBJECT IDENTIFIER ::= { ciscoAAAServerMIB 1 }
-- Configuration objects
casConfig OBJECT IDENTIFIER ::= { cAAAServerMIBObjects 1 }
-- Statistics objects
casStatistics OBJECT IDENTIFIER ::= { cAAAServerMIBObjects 2 }
--
-- Notification Configuration
--
casServerStateChangeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the generation of
casServerStateChange notification.
When this variable is true(1), generation of
casServerStateChange notifications is enabled.
When this variable is false(2), generation of
casServerStateChange notifications is disabled.
The default value is false(2).
"
::= { casConfig 1 }
--
-- Server Configuration Table
--
casConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CasConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows current configurations for each
AAA server, allows existing servers to be removed
and new ones to be created.
"
::= { casConfig 2 }
casConfigEntry OBJECT-TYPE
SYNTAX CasConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An AAA server configuration identified by its protocol
and its index.
An entry is created/removed when a server is defined
or undefined with IOS configuration commands via
CLI or by issuing appropriate sets to this table
using snmp.
A management station wishing to create an entry should
first generate a random number to be used as the index
to this sparse table. The station should then create the
associated instance of the row status and row index objects.
It must also, either in the same or in successive PDUs,
create an instance of casAddress where casAddress is the
IP address of the server to be added.
It should also modify the default values for casAuthenPort,
casAcctPort if the defaults are not appropriate.
If casKey is a zero-length string or is not explicitly set,
then the global key will be used. Otherwise, this value
is used as the key for this server instance.
Once the appropriate instance of all the configuration
objects have been created, either by an explicit SNMP set
request or by default, the row status should be set to
active(1) to initiate the request.
After the AAA server is made active, the entry can not be
modified - the only allowed operation after this is to
destroy the entry by setting casConfigRowStatus to destroy(6).
casPriority is automatically assigned once the entry is
made active and reflects the relative priority of the
defined server with respect to already configured servers.
Newly-created servers will be assigned the lowest priority.
To reassign server priorities to existing server entries,
it may be necessary to destroy and recreate entries in order
of priority.
Entries in this table with casConfigRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with casConfigRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
If a server address being created via SNMP exists already
in another active casConfigEntry, then a newly created row
can not be made active until the original row with the
with the same server address value is destroyed.
Upon reload, casIndex values may be changed, but the
priorities that were saved before reload will be retained,
with lowest priority number corresponding to the higher
priority servers.
"
INDEX { casProtocol,
casIndex }
::= { casConfigTable 1}
CasConfigEntry ::=
SEQUENCE {
casProtocol CiscoAAAProtocol,
casIndex Unsigned32,
casAddress IpAddress,
casAuthenPort INTEGER,
casAcctPort INTEGER,
casKey DisplayString,
casPriority Unsigned32,
casConfigRowStatus RowStatus
}
casProtocol OBJECT-TYPE
SYNTAX CiscoAAAProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The variable denotes the protocol used by the
managed device with the AAA server corresponding to
this entry in the table.
"
::= { casConfigEntry 1 }
casIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management station wishing to initiate a new AAA server
configuration should use a random value for this object
when creating an instance of casConfigEntry.
The RowStatus semantics of the casConfigRowStatus object
will prevent access conflicts.
If the randomly chosen casIndex value for row creation
is already in use by an existing entry, snmp set to the
casIndex value will fail.
"
::= { casConfigEntry 2 }
casAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the server.
"
::= { casConfigEntry 3 }
casAuthenPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"UDP/TCP port used for authentication in the configuration
For TACACS+, this object should be explictly set.
Default value is the IOS default for radius: 1645.
"
DEFVAL { 1645 }
::= { casConfigEntry 4 }
casAcctPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"UDP/TCP port used for accounting service in the configuration
For TACACS+, the value of casAcctPort is ignored.
casAuthenPort will be used instead.
Default value is the IOS default for radius: 1646.
"
DEFVAL { 1646 }
::= { casConfigEntry 5 }
casKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The server key to be used with this server.
Retrieving the value of this object via SNMP will
return an empty string for security reasons.
"
DEFVAL { "" }
::= { casConfigEntry 6 }
casPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number that indicates the priority of the server in
this entry. Lower numbers indicate higher priority.
"
::= { casConfigEntry 7 }
casConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. Once the entry status is
set to active, the associated entry cannot be modified
except destroyed by setting this object to destroy(6).
"
::= { casConfigEntry 8 }
--
-- Server Statistics
--
casStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CasStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table providing statistics for each server.
"
::= { casStatistics 1 }
casStatisticsEntry OBJECT-TYPE
SYNTAX CasStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistical information about a particular server.
Objects in this table are read-only and appear
automatically whenever a row in the casConfigTable
is made active.
Objects in this table disappear when casConfigRowStatus
for the corresponding casConfigEntry is set to the
destroy(6) state.
"
AUGMENTS { casConfigEntry }
::= { casStatisticsTable 1 }
CasStatisticsEntry::=
SEQUENCE {
casAuthenRequests Counter32,
casAuthenRequestTimeouts Counter32,
casAuthenUnexpectedResponses Counter32,
casAuthenServerErrorResponses Counter32,
casAuthenIncorrectResponses Counter32,
casAuthenResponseTime TimeInterval,
casAuthenTransactionSuccesses Counter32,
casAuthenTransactionFailures Counter32,
casAuthorRequests Counter32,
casAuthorRequestTimeouts Counter32,
casAuthorUnexpectedResponses Counter32,
casAuthorServerErrorResponses Counter32,
casAuthorIncorrectResponses Counter32,
casAuthorResponseTime TimeInterval,
casAuthorTransactionSuccesses Counter32,
casAuthorTransactionFailures Counter32,
casAcctRequests Counter32,
casAcctRequestTimeouts Counter32,
casAcctUnexpectedResponses Counter32,
casAcctServerErrorResponses Counter32,
casAcctIncorrectResponses Counter32,
casAcctResponseTime TimeInterval,
casAcctTransactionSuccesses Counter32,
casAcctTransactionFailures Counter32,
casState INTEGER,
casCurrentStateDuration TimeInterval,
casPreviousStateDuration TimeInterval,
casTotalDeadTime TimeInterval,
casDeadCount Counter32
}
--
-- Authentication statistics
--
casAuthenRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication requests sent to
this server since it is made active.
Retransmissions due to request timeouts are
counted as distinct requests.
"
::= { casStatisticsEntry 1 }
casAuthenRequestTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication requests which have
timed out since it is made active.
A timeout results in a retransmission of the request
If the maximum number of attempts has been reached,
no further retransmissions will be attempted.
"
::= { casStatisticsEntry 2 }
casAuthenUnexpectedResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unexpected authentication responses received
from this server since it is made active.
An example is a delayed response to a request which had
already timed out.
"
::= { casStatisticsEntry 3 }
casAuthenServerErrorResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of server ERROR authentication responses
received from this server since it is made active.
These are responses indicating that the server itself
has identified an error with its authentication
operation.
"
::= { casStatisticsEntry 4 }
casAuthenIncorrectResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication responses which could not
be processed since it is made active.
Reasons include inability to decrypt the response,
invalid fields, or the response is not valid based on
the request.
"
::= { casStatisticsEntry 5 }
casAuthenResponseTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average response time for authentication requests sent
to this server, excluding timeouts, since system
re-initialization.
"
::= { casStatisticsEntry 6 }
casAuthenTransactionSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication transactions with this
server which succeeded since it is made active.
A transaction may include multiple request
retransmissions if timeouts occur.
A transaction is successful if the server responds
with either an authentication pass or fail.
"
::= { casStatisticsEntry 7 }
casAuthenTransactionFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication transactions with this
server which failed since it is made active.
A transaction may include multiple request
retransmissions if timeouts occur.
A transaction failure occurs if maximum resends have
been met or the server aborts the transaction.
"
::= { casStatisticsEntry 8 }
--
-- Authorization statistics
--
casAuthorRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authorization requests sent to
this server since it is made active.
Retransmissions due to request timeouts are
counted as distinct requests.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 9 }
casAuthorRequestTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authorization requests which have
timed out since it is made active.
A timeout results in a retransmission of the request
If the maximum number of attempts has been reached,
no further retransmissions will be attempted.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 10 }
casAuthorUnexpectedResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unexpected authorization responses received
from this server since it is made active.
An example is a delayed response to a request which
had already timed out.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 11 }
casAuthorServerErrorResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of server ERROR authorization responses
received from this server since it is made active.
These are responses indicating that the server itself
has identified an error with its authorization
operation.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 12 }
casAuthorIncorrectResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authorization responses which could not
be processed since it is made active.
Reasons include inability to decrypt the response,
invalid fields, or the response is not valid based on
the request.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 13 }
casAuthorResponseTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average response time for authorization requests sent
to this server, excluding timeouts, since system
re-initialization.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 14 }
casAuthorTransactionSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authorization transactions with this
server which succeeded since it is made active.
A transaction may include multiple request
retransmissions if timeouts occur.
A transaction is successful if the server responds
with either an authorization pass or fail.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 15 }
casAuthorTransactionFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authorization transactions with this
server which failed since it is made active.
A transaction may include multiple request
retransmissions if timeouts occur.
A transaction failure occurs if maximum resends have
been met or the server aborts the transaction.
This object is not instantiated for protocols which do
not support a distinct authorization function.
"
::= { casStatisticsEntry 16 }
--
-- Accounting statistics
--
casAcctRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting requests sent to
this server since system re-initialization.
Retransmissions due to request timeouts are
counted as distinct requests.
"
::= { casStatisticsEntry 17 }
casAcctRequestTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting requests which have
timed out since system re-initialization.
A timeout results in a retransmission of the request
If the maximum number of attempts has been reached,
no further retransmissions will be attempted.
"
::= { casStatisticsEntry 18 }
casAcctUnexpectedResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unexpected accounting responses received
from this server since system re-initialization.
An example is a delayed response to a request which had
already timed out.
"
::= { casStatisticsEntry 19 }
casAcctServerErrorResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of server ERROR accounting responses received
from this server since system re-initialization.
These are responses indicating that the server itself
has identified an error with its accounting
operation.
"
::= { casStatisticsEntry 20 }
casAcctIncorrectResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting responses which could not
be processed since system re-initialization.
Reasons include inability to decrypt the response,
invalid fields, or the response is not valid based on
the request.
"
::= { casStatisticsEntry 21 }
casAcctResponseTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average response time for accounting requests sent
to this server,, since system re-initialization
excluding timeouts.
"
::= { casStatisticsEntry 22 }
casAcctTransactionSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting transactions with this
server which succeeded since system re-initialization.
A transaction may include multiple request
retransmissions if timeouts occur.
A transaction is successful if the server responds
with either an accounting pass or fail.
"
::= { casStatisticsEntry 23 }
casAcctTransactionFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting transactions with this
server which failed since system re-initialization.
A transaction may include multiple request
retransmissions if timeouts occur.
A transaction failure occurs if maximum resends have
been met or the server aborts the transaction.
"
::= { casStatisticsEntry 24 }
--
-- Server availability
--
casState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
dead(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of this server.
up(1) - Server responding to requests
dead(2) - Server failed to respond
A server is marked dead if it does not respond after
maximum retransmissions.
A server is marked up again either after a waiting
period or if some response is received from it.
The initial value of casState is 'up(1)' at system
re-initialization. This will only transistion to 'dead(2)'
if an attempt to communicate fails.
"
::= { casStatisticsEntry 25 }
casCurrentStateDuration OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the elapsed time the server has
been in its current state as shown in casState.
"
::= { casStatisticsEntry 26 }
casPreviousStateDuration OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the elapsed time the server was
been in its previous state prior to the most recent
transistion of casState.
This value is zero if the server has not changed state.
"
::= { casStatisticsEntry 27 }
casTotalDeadTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total elapsed time this server's casState has
had the value 'dead(2)' since system re-initialization.
"
::= { casStatisticsEntry 28 }
casDeadCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this server's casState has
transitioned to 'dead(2)' since system re-initialization.
"
::= { casStatisticsEntry 29 }
-- ******************************************************************
-- Notifications
-- ******************************************************************
cAAAServerMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ ciscoAAAServerMIB 2 }
cAAAServerMIBNotifications OBJECT IDENTIFIER ::=
{ cAAAServerMIBNotificationPrefix 0 }
casServerStateChange NOTIFICATION-TYPE
OBJECTS { casState,
casPreviousStateDuration,
casTotalDeadTime }
STATUS current
DESCRIPTION
"An AAA server state change notification is generated
whenever casState changes value.
"
::= { cAAAServerMIBNotifications 1 }
-- ******************************************************************
-- Conformance and Compliance
-- ******************************************************************
cAAAServerMIBConformance OBJECT IDENTIFIER ::= { ciscoAAAServerMIB 3 }
casMIBCompliances OBJECT IDENTIFIER ::= { cAAAServerMIBConformance 1 }
casMIBGroups OBJECT IDENTIFIER ::= { cAAAServerMIBConformance 2 }
-- compliance statements
casMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO AAA Server MIB"
MODULE -- this module
MANDATORY-GROUPS
{
casConfigGroup,
casStatisticsGroup,
casServerNotificationGroup
}
OBJECT casAddress
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is not required."
OBJECT casAuthenPort
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is not required."
OBJECT casAcctPort
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is not required."
OBJECT casKey
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is not required."
OBJECT casConfigRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is not required."
::= { casMIBCompliances 1 }
-- units of conformance
casStatisticsGroup OBJECT-GROUP
OBJECTS {
casAuthenRequests,
casAuthenRequestTimeouts,
casAuthenUnexpectedResponses,
casAuthenServerErrorResponses,
casAuthenIncorrectResponses,
casAuthenResponseTime,
casAuthenTransactionSuccesses,
casAuthenTransactionFailures,
casAuthorRequests,
casAuthorRequestTimeouts,
casAuthorUnexpectedResponses,
casAuthorServerErrorResponses,
casAuthorIncorrectResponses,
casAuthorResponseTime,
casAuthorTransactionSuccesses,
casAuthorTransactionFailures,
casAcctRequests,
casAcctRequestTimeouts,
casAcctUnexpectedResponses,
casAcctServerErrorResponses,
casAcctIncorrectResponses,
casAcctResponseTime,
casAcctTransactionSuccesses,
casAcctTransactionFailures,
casState,
casCurrentStateDuration,
casPreviousStateDuration,
casTotalDeadTime,
casDeadCount
}
STATUS current
DESCRIPTION
"Objects for providing AAA server statistics and status.
"
::= { casMIBGroups 1 }
casConfigGroup OBJECT-GROUP
OBJECTS {
casServerStateChangeEnable,
casAddress,
casAuthenPort,
casAcctPort,
casKey,
casPriority,
casConfigRowStatus
}
STATUS current
DESCRIPTION
"Objects for configuring the AAA servers.
"
::= { casMIBGroups 2 }
casServerNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { casServerStateChange }
STATUS current
DESCRIPTION
"The collection of notifications used for
monitoring AAA server status"
::= { casMIBGroups 3 }
END