david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/cisco/CISCO-CAT6K-CROSSBAR-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

3029 lines
103 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-CAT6K-CROSSBAR-MIB.my
--
-- Mar 2001, Padma Pullela
-- Nov. 2002, Padma Pullela/Lilian Jiang
-- March 2003, Padma Pullela
-- June 2004, Padma Pullela
--
-- Copyright (c) 2001-2009, 2012-2013 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-CAT6K-CROSSBAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Unsigned32,
Gauge32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue,
DisplayString,
DateAndTime,
TimeStamp
FROM SNMPv2-TC
entPhysicalName,
entPhysicalVendorType,
entPhysicalIndex,
entPhysicalDescr
FROM ENTITY-MIB
Percent
FROM CISCO-QOS-PIB-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoCat6kCrossbarMIB MODULE-IDENTITY
LAST-UPDATED "201309160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cat6000@cisco.com"
DESCRIPTION
"The Catalyst 6000 Crossbar MIB provides instrumentation for
configuration and operation of the crossbar switching fabric
module, and additional functionalities for switching bus
and internal bus, etc."
REVISION "201309160000Z"
DESCRIPTION
"Added two new enumerations 'pfc4xxl' and 'pfc4lite'
in cc6kxbarSysCapPfcOperMode."
REVISION "201205310000Z"
DESCRIPTION
"Added following OBJECT-GROUP
- cc6kxbarStatisticsLbusDropGroup
Added new compliance
- cc6kxbarMIBComplianceVer8.
Updated the description for
- cc6kxbarStatisticsPeakTmInUtil
- cc6kxbarStatisticsPeakTmOutUtil."
REVISION "200902150000Z"
DESCRIPTION
"Added cc6kxbarErrRcvryPersLinkResGroup and
cc6kxbarErrRcvryChResyncGroup,
cc6kxbarTMSwBusUtilGroup,
cc6kxbarTMSwBusUtilNotifControlGroup,
cc6kxbarTMSwBusUtilNotifObjectGroup,
cc6kxbarTMSwBusUtilNotifGroup,
cc6kxbarTMChUtilGroup,
cc6kxbarTMChUtilNotifControlGroup,
cc6kxbarTMChUtilNotifObjectGroup,
cc6kxbarTMChUtilNotifGroup.
Added two new enumerations 'pfc4' and 'pfc4xl'
in cc6kxbarSysCapPfcOperMode.
Added DISPLAY-HINT in TEXTUAL-CONVENTION
of ModuleSlotNumber and FabricChannelNumber."
REVISION "200712180000Z"
DESCRIPTION
"Added cc6kxbarSysCapPfcOperModeGroup,
cc6kxbarSysCapSwitchResGroup, cc6kxbarChannelUtilGroup1,
cc6kxbarSwBusGroup1, cc6kxbarErrorGroup,
cc6kxbarErrRcvryThresholdGroup and
cc6kxbarErrRcvrySwitchoverGroup."
REVISION "200612190000Z"
DESCRIPTION
"Added cc6kxbarDcefOnlyModeAllowedGroup,
cc6kxbarForceBusModeGroup,
cc6kxbarFlowCtrlNotifCtrlGroup,
cc6kxbarFlowCtrlBusThreshGroup,
cc6kxbarFlowCtrlBusThrNotifGroup
and cc6kxbarBusOnlyModeOperGroup."
REVISION "200411190000Z"
DESCRIPTION
"Added cc6kxbarIntBusCRCErrGroup."
REVISION "200408110000Z"
DESCRIPTION
"Added cc6kxbarIntBusNotifControlGroup and
cc6kxbarIntBusCRCErrNotifGroup."
REVISION "200406110000Z"
DESCRIPTION
"Added cc6kxbarTruncatedModeOper Object and changed the
description of cc6kxbarTruncatedModeAllowed and
cc6kxbarMinFabricPresent."
REVISION "200309290000Z"
DESCRIPTION
"Changed the description of cc6kxbarTruncatedModeAllowed and
cc6kxbarMinFabricPresent. Removed default value for
cc6kxbarTruncatedModeAllowed."
REVISION "200304020000Z"
DESCRIPTION
"Changed the SYNTAX and description of cc6kxbarMinFabricPresent
and description of cc6kxbarTruncatedModeAllowed."
REVISION "200212050000Z"
DESCRIPTION
"Added cc6kxbarModuleChannelSpeed, cc6kxbarSwBusSwitchingStatus,
cc6kxbarSwBusFailureDuration, cc6kxbarSwBusNotifEnable
objects and cc6kxbarSwBusStallNotif notification."
REVISION "200106250000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 217 }
ciscoCat6kXbarMIBObjects OBJECT IDENTIFIER
::= { ciscoCat6kCrossbarMIB 1 }
cc6kxbarConfiguration OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 1 }
cc6kxbarStatus OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 2 }
cc6kxbarStatistics OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 3 }
cc6kxbarSwBusObjects OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 4 }
cc6kxbarIntBusObjects OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 5 }
cc6kxbarFlowCtrlObjects OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 6 }
cc6kxbarSystemCapacityObjects OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 7 }
cc6kxbarErrorRecoveryObjects OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 8 }
cc6kxbarTrafficMonitorObjects OBJECT IDENTIFIER
::= { ciscoCat6kXbarMIBObjects 9 }
cc6kxbarTrafficMonitorSwBusObjects OBJECT IDENTIFIER
::= { cc6kxbarTrafficMonitorObjects 1 }
cc6kxbarTrafficMonitorChObjects OBJECT IDENTIFIER
::= { cc6kxbarTrafficMonitorObjects 2 }
-- Textual Conventions
ModuleSlotNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Slot number of the module."
SYNTAX Unsigned32
FabricChannelNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Fabric channel number."
SYNTAX Unsigned32
ChannelStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Status of the Channel."
SYNTAX INTEGER {
ok(1),
syncError(2),
heartbeatError(3),
crcError(4),
bufferError(5),
timeoutError(6),
unused(7)
}
-- Configuration objects
cc6kxbarFallbackMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cc6kxbarFallbackMode controls system fallback to bus-mode
after loss of switching fabric module.
'true' - When the last fabric card is removed
system will adjust the supervisor and
line cards switching mode automatically without
resetting the system. With this feature enabled,
the switch might lose traffic while it's
changing the switching mode.
'false' - All the ports in the system will be
disabled when the last fabric card is removed."
DEFVAL { true }
::= { cc6kxbarConfiguration 1 }
cc6kxbarBusOnlyModeAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether bus mode is administratively enabled on
the device or not."
::= { cc6kxbarConfiguration 2 }
cc6kxbarTruncatedModeAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether truncated mode is
administratively enabled on the device or not."
::= { cc6kxbarConfiguration 3 }
cc6kxbarMinFabricPresent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the minimum number
of switching fabric capable modules to be present in the
system, for any switching fabric capable module to be in
'crossbarmode' indicated by cc6kxbarModuleModeSwitchingMode,
when cc6kxbarTruncatedModeOper is 'false'."
::= { cc6kxbarConfiguration 4 }
cc6kxbarLcdBannerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarLcdBannerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cc6kxbarLcdBannerTable configures the Lcd banner of the
fabric module."
::= { cc6kxbarConfiguration 5 }
cc6kxbarLcdBannerEntry OBJECT-TYPE
SYNTAX Cc6kxbarLcdBannerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cc6kxbarLcdBannerTable.
Entries are created by the agent based on the
size of the lcd banner."
INDEX { cc6kxbarLcdBannerIndex }
::= { cc6kxbarLcdBannerTable 1 }
Cc6kxbarLcdBannerEntry ::= SEQUENCE {
cc6kxbarLcdBannerIndex Unsigned32,
cc6kxbarLcdBannerBanner DisplayString,
cc6kxbarLcdBannerMaxSize Unsigned32
}
cc6kxbarLcdBannerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Object which specifies a unique entry in the
table."
::= { cc6kxbarLcdBannerEntry 1 }
cc6kxbarLcdBannerBanner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Message that would be displayed on the fabric card LCD.
The size of cc6kxbarLcdBannerBanner should be less than
or equal to the cc6kxbarLcdBannerMaxSize value."
::= { cc6kxbarLcdBannerEntry 2 }
cc6kxbarLcdBannerMaxSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum size of the associated cc6kxbarLcdBannerBanner
object."
::= { cc6kxbarLcdBannerEntry 3 }
cc6kxbarTruncatedModeOper OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the truncated mode is
operationally enabled on the device or not.
'true' - With the fabric module present in the system,
cc6kxbarModuleModeSwitchingMode will be
'crossbarmode' for all the fabric capable
modules.
'false'- With the cc6kxbarMinFabricPresent fabric capable
modules and the fabric module present in the system,
cc6kxbarModuleModeSwitchingMode
will be 'crossbarmode' for fabric capable modules."
::= { cc6kxbarConfiguration 6 }
cc6kxbarDcefOnlyModeAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode."
::= { cc6kxbarConfiguration 7 }
cc6kxbarForceBusMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether some affected modules are forced to be in
'busmode' or not.
'true' - Setting cc6kxbarForceBusMode to 'true' makes the
cc6kxbarModuleModeSwitchingMode of all
the affected modules to 'busmode'. Changing the
cc6kxbarForceBusMode to 'true' will make all the
affected modules reloaded and booted up as
non fabric capable modules.
'false'- Setting cc6kxbarForceBusMode to 'false' makes the
cc6kxbarModuleModeSwitchingMode of all the affected
modules to the default value. Changing
cc6kxbarForceBusMode to 'false' will make all the
affected modules reloaded and booted up with the
default cc6kxbarModuleModeSwitchingMode."
::= { cc6kxbarConfiguration 8 }
cc6kxbarBusOnlyModeOper OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the bus mode is operationally enabled on the
device or not.
'true' - Modules are allowed to run in 'busmode'.
'false' - None of the modules are allowed to run in 'busmode'
i.e., All the non-fabric capable modules will
be powered off. Absence of fabric module results
in all the fabric capable modules being powered
off."
::= { cc6kxbarConfiguration 9 }
-- Status objects
cc6kxbarFabricActiveSlot OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"cc6kxbarFabricActiveSlot indicates the slot number of the
active switching fabric module. A value of zero indicates
that the active switching fabric module is either powered
down or not present in the chassis."
::= { cc6kxbarStatus 1 }
cc6kxbarFabricBackupSlot OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"cc6kxbarFabricBackupSlot indicates the slot number of the
backup switching fabric module. A value of zero indicates
that the backup switching fabric module is either powered
down or not present in the chassis."
::= { cc6kxbarStatus 2 }
cc6kxbarModuleModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarModuleModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cc6kxbarModuleModeTable indicates the switching mode of each
module in the system."
::= { cc6kxbarStatus 3 }
cc6kxbarModuleModeEntry OBJECT-TYPE
SYNTAX Cc6kxbarModuleModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cc6kxbarModuleModeTable. The agent creates
an entry when a non switching fabric module
is inserted in the chassis.
The agent destroys an entry when a non switching fabric
module is power down or reset or removed from the chassis."
INDEX { cc6kxbarModuleModeModule }
::= { cc6kxbarModuleModeTable 1 }
Cc6kxbarModuleModeEntry ::= SEQUENCE {
cc6kxbarModuleModeModule ModuleSlotNumber,
cc6kxbarModuleModeSwitchingMode INTEGER
}
cc6kxbarModuleModeModule OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The module slot number."
::= { cc6kxbarModuleModeEntry 1 }
cc6kxbarModuleModeSwitchingMode OBJECT-TYPE
SYNTAX INTEGER {
busmode(1),
crossbarmode(2),
dcefmode(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"cc6kxbarModuleModeSwitchingMode indicates switching mode
of the cc6kxbarModuleModeModule.
'busmode' - Modules in this mode don't use fabric.
Backplane is used for both lookup and data
forwarding.
'crossbarmode' - Modules in this mode use backplane
for forwarding decision and fabric for data
forwarding
'dcefmode' - Modules in this mode use fabric for data
forwarding and local forwarding is enabled."
::= { cc6kxbarModuleModeEntry 2 }
cc6kxbarModuleChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarModuleChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cc6kxbarModuleChannelTable shows the operational status
of fabric channels. This table will be instantiated only when
cc6kxbarFabricActiveSlot has a valid value other than zero."
::= { cc6kxbarStatus 4 }
cc6kxbarModuleChannelEntry OBJECT-TYPE
SYNTAX Cc6kxbarModuleChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cc6kxbarModuleChannelTable."
INDEX {
cc6kxbarModuleChannelModule,
cc6kxbarModuleChannelChannel
}
::= { cc6kxbarModuleChannelTable 1 }
Cc6kxbarModuleChannelEntry ::= SEQUENCE {
cc6kxbarModuleChannelModule ModuleSlotNumber,
cc6kxbarModuleChannelChannel FabricChannelNumber,
cc6kxbarModuleChannelModStatus ChannelStatus,
cc6kxbarModuleChannelFabStatus ChannelStatus,
cc6kxbarModuleChannelSpeed Gauge32
}
cc6kxbarModuleChannelModule OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The module slot number."
::= { cc6kxbarModuleChannelEntry 1 }
cc6kxbarModuleChannelChannel OBJECT-TYPE
SYNTAX FabricChannelNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fabric channel number of the cc6kxbarModuleChannelModule."
::= { cc6kxbarModuleChannelEntry 2 }
cc6kxbarModuleChannelModStatus OBJECT-TYPE
SYNTAX ChannelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the fabric channel at the
cc6kxbarModuleChannelModule."
::= { cc6kxbarModuleChannelEntry 3 }
cc6kxbarModuleChannelFabStatus OBJECT-TYPE
SYNTAX ChannelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the fabric channel at the
cc6kxbarFabricActiveSlot."
::= { cc6kxbarModuleChannelEntry 4 }
cc6kxbarModuleChannelSpeed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed in mega bits per second of the
cc6kxbarModuleChannelChannel for cc6kxbarModuleChannelModule."
::= { cc6kxbarModuleChannelEntry 5 }
-- Statistics Objects
cc6kxbarStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cc6kxbarStatisticsTable gives the
fabric channel counters and utilization
information. This table will be instantiated when
cc6kxbarFabricActiveSlot has a valid value other than
zero."
::= { cc6kxbarStatistics 1 }
cc6kxbarStatisticsEntry OBJECT-TYPE
SYNTAX Cc6kxbarStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cc6kxbarStatisticsTable."
INDEX {
cc6kxbarStatisticsModule,
cc6kxbarStatisticsChannel
}
::= { cc6kxbarStatisticsTable 1 }
Cc6kxbarStatisticsEntry ::= SEQUENCE {
cc6kxbarStatisticsModule ModuleSlotNumber,
cc6kxbarStatisticsChannel FabricChannelNumber,
cc6kxbarStatisticsInErrors Counter32,
cc6kxbarStatisticsOutErrors Counter32,
cc6kxbarStatisticsOutDropped Counter32,
cc6kxbarStatisticsInUtil Percent,
cc6kxbarStatisticsOutUtil Percent,
cc6kxbarStatisticsPeakInUtil Percent,
cc6kxbarStatisticsPeakTmInUtil DateAndTime,
cc6kxbarStatisticsPeakOutUtil Percent,
cc6kxbarStatisticsPeakTmOutUtil DateAndTime,
cc6kxbarStatisticsLbusDrops Counter32
}
cc6kxbarStatisticsModule OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The module slot number."
::= { cc6kxbarStatisticsEntry 1 }
cc6kxbarStatisticsChannel OBJECT-TYPE
SYNTAX FabricChannelNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fabric channel number associated with the
cc6kxbarStatisticsModule."
::= { cc6kxbarStatisticsEntry 2 }
cc6kxbarStatisticsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error packets received on
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule
since this entry was last initialized."
::= { cc6kxbarStatisticsEntry 3 }
cc6kxbarStatisticsOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error packets transmitted on
cc6kxbarStatisticsModule through the
cc6kxbarStatisticsChannel since this entry was
last initialized."
::= { cc6kxbarStatisticsEntry 4 }
cc6kxbarStatisticsOutDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped packets transmitted on the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule
since this entry was last initialized."
::= { cc6kxbarStatisticsEntry 5 }
cc6kxbarStatisticsInUtil OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input utilization of the cc6kxbarStatisticsChannel for
cc6kxbarStatisticsModule."
::= { cc6kxbarStatisticsEntry 6 }
cc6kxbarStatisticsOutUtil OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output utilization of the cc6kxbarStatisticsChannel for
cc6kxbarStatisticsModule."
::= { cc6kxbarStatisticsEntry 7 }
cc6kxbarStatisticsPeakInUtil OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of cc6kxbarStatisticsInUtil of the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule."
::= { cc6kxbarStatisticsEntry 8 }
cc6kxbarStatisticsPeakTmInUtil OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of most recent change in the corresponding
instance value of cc6kxbarStatisticsPeakInUtil.
This object contains value 0x0000010100000000 when the
corresponding instance value of cc6kxbarStatisticsPeakInUtil
is '0'."
::= { cc6kxbarStatisticsEntry 9 }
cc6kxbarStatisticsPeakOutUtil OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of cc6kxbarStatisticsOutUtil of the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule."
::= { cc6kxbarStatisticsEntry 10 }
cc6kxbarStatisticsPeakTmOutUtil OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of most recent change in the corresponding
instance value of cc6kxbarStatisticsPeakOutUtil.
This object contains value 0x0000010100000000 when the
corresponding instance value of cc6kxbarStatisticsPeakOutUtil
is '0'."
::= { cc6kxbarStatisticsEntry 11 }
cc6kxbarStatisticsLbusDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets that have been
deterministically dropped due to the threshold on the local
bus FIFO, errors and exception conditions."
::= { cc6kxbarStatisticsEntry 12 }
cc6kxbarErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cc6kxbarErrorTable provides the fabric channel error
information. This table will be instantiated only when
cc6kxbarFabricActiveSlot has a valid value other than zero."
::= { cc6kxbarStatistics 2 }
cc6kxbarErrorEntry OBJECT-TYPE
SYNTAX Cc6kxbarErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cc6kxbarErrorTable for a specific fabric channel
on a specific module."
INDEX {
cc6kxbarErrorModule,
cc6kxbarErrorChannel
}
::= { cc6kxbarErrorTable 1 }
Cc6kxbarErrorEntry ::= SEQUENCE {
cc6kxbarErrorModule ModuleSlotNumber,
cc6kxbarErrorChannel FabricChannelNumber,
cc6kxbarErrorModuleCrc Gauge32,
cc6kxbarErrorModuleHbeat Gauge32,
cc6kxbarErrorModuleSync Gauge32,
cc6kxbarErrorModuleDDRSync Gauge32,
cc6kxbarErrorChannelSync Gauge32,
cc6kxbarErrorChannelBuffer Gauge32,
cc6kxbarErrorChannelTimeout Gauge32
}
cc6kxbarErrorModule OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The module slot number."
::= { cc6kxbarErrorEntry 1 }
cc6kxbarErrorChannel OBJECT-TYPE
SYNTAX FabricChannelNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fabric channel number associated with the
cc6kxbarErrorModule."
::= { cc6kxbarErrorEntry 2 }
cc6kxbarErrorModuleCrc OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of CRC error packets for the
cc6kxbarErrorChannel of the cc6kxbarErrorModule."
::= { cc6kxbarErrorEntry 3 }
cc6kxbarErrorModuleHbeat OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of heartbeat misses detected
for the cc6kxbarErrorChannel of the cc6kxbarErrorModule."
::= { cc6kxbarErrorEntry 4 }
cc6kxbarErrorModuleSync OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of times cc6kxbarErrorModule could
not sync to the active switching fabric module."
::= { cc6kxbarErrorEntry 5 }
cc6kxbarErrorModuleDDRSync OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DDR(Double Data Rate) channel
sync errors for the cc6kxbarErrorChannel of the
cc6kxbarErrorModule."
::= { cc6kxbarErrorEntry 6 }
cc6kxbarErrorChannelSync OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of sync errors received at
cc6kxbarErrorChannel."
::= { cc6kxbarErrorEntry 7 }
cc6kxbarErrorChannelBuffer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of times the memory buffer for
cc6kxbarErrorChannel of the cc6kxbarErrorModule is full."
::= { cc6kxbarErrorEntry 8 }
cc6kxbarErrorChannelTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of timeouts for input from
the cc6kxbarErrorChannel of the cc6kxbarErrorModule."
::= { cc6kxbarErrorEntry 9 }
-- Switching Bus Objects
cc6kxbarSwBusSwitchingStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
stalled(2),
isolated(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current switching status of the
switching bus on the system.
normal -- the switching bus is under normal
packet switching operation.
stalled -- the switching bus has stopped packet
switching but is still attached to
the system, i.e., the switching bus
is stalled.
isolated -- the switching bus has stopped packet
switching and is detached from
the system, i.e., the switching bus
is isolated.
The object is only instantiated on systems which
support switching bus switching detection feature."
::= { cc6kxbarSwBusObjects 1 }
cc6kxbarSwBusFailureDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the failure duration of the switching
bus since the switching bus has transitioned
out of the normal(1) state as monitored by
cc6kxbarSwBusSwitchingStatus. If the object
value of cc6kxbarSwBusSwitchingStatus is
normal(1), then the object value of
cc6kxbarSwBusFailureDuration should be zero.
The object is only instantiated on systems which
support switching bus switching detection feature."
::= { cc6kxbarSwBusObjects 2 }
cc6kxbarSwBusNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether or not the notification
cc6kxbarSwBusStatusChangeNotif should be generated
when there is change in the switching status of the
switching bus as monitored by
cc6kxbarSwBusSwitchingStatus.
The object is only instantiated on systems which
support switching bus switching detection feature."
::= { cc6kxbarSwBusObjects 3 }
cc6kxbarSwBusUtilization OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the percentage of bandwidth utilization
of the switching bus."
::= { cc6kxbarSwBusObjects 4 }
cc6kxbarSwBusPeakUtilization OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak percentage value of bandwidth
utilization of the switching bus since the system
started."
::= { cc6kxbarSwBusObjects 5 }
cc6kxbarSwBusPeakTimeUtil OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time at which the peak percentage value
of bandwidth utilization of the switching bus value
occurred."
::= { cc6kxbarSwBusObjects 6 }
-- Internal Bus Objects
cc6kxbarIntBusNotifEnable OBJECT-TYPE
SYNTAX BITS {
intBusCRCErrExcd(0),
intBusCRCErrRcvrd(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the generation of a specified
notification for internal bus is enabled or not.
If a bit corresponding to a notification is set to
1, then that notification can be generated.
intBusCRCErrExcd -- the cc6kxbarIntBusCRCErrExcdNotif
notification.
intBusCRCErrRcvrd -- the cc6kxbarIntBusCRCErrRcvrdNotif
notification."
::= { cc6kxbarIntBusObjects 1 }
cc6kxbarIntBusCRCErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarIntBusCRCErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing internal bus CRC error information
on a list of physical entities (such as modules)."
::= { cc6kxbarIntBusObjects 2 }
cc6kxbarIntBusCRCErrEntry OBJECT-TYPE
SYNTAX Cc6kxbarIntBusCRCErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing internal bus CRC error information
on a physical entity (such as a module)."
INDEX { entPhysicalIndex }
::= { cc6kxbarIntBusCRCErrTable 1 }
Cc6kxbarIntBusCRCErrEntry ::= SEQUENCE {
cc6kxbarIntBusCRCErrExcdStatus TruthValue,
cc6kxbarIntBusCRCErrExcdCount Unsigned32
}
cc6kxbarIntBusCRCErrExcdStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the internal bus CRC error
on a physical entity is currently exceeding the fatal
threshold or not."
::= { cc6kxbarIntBusCRCErrEntry 1 }
cc6kxbarIntBusCRCErrExcdCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of times the internal bus CRC
error on a physical entity has exceeded the fatal
threshold."
::= { cc6kxbarIntBusCRCErrEntry 2 }
-- Flow Control Objects
cc6kxbarFlowCtrlNotifEnable OBJECT-TYPE
SYNTAX BITS {
busThreshExcd(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the generation of a specified
notification for flow control feature is enabled or
not. If a bit corresponding to a notification is set
to one, then that notification can be generated.
busThreshExcd -- the cc6kxbarFlowCtrlBusThrExcdNotif
notification."
::= { cc6kxbarFlowCtrlObjects 1 }
cc6kxbarFlowCtrlBusFIFOThrMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mode configuration of the system bus
flow control FIFO threshold.
off -- the flow control FIFO threshold is set to the
original value defined by the system.
on -- the flow control FIFO threshold is set to the
lower value defined by the system.
auto -- the system starts monitoring the system bus
flow control FIFO threshold and will change the
flow control FIFO threshold from the original
value to the lower value when the system detects
the first occurrence of the threshold exceeding
on a physical entity (such as a module) over
the system allowed limit."
::= { cc6kxbarFlowCtrlObjects 2 }
cc6kxbarFlowCtrlBusFIFOThrValue OBJECT-TYPE
SYNTAX INTEGER {
original(1),
lower(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current value of the system bus flow
control FIFO threshold, whether it is the original
value or the lower value."
::= { cc6kxbarFlowCtrlObjects 3 }
cc6kxbarFlowCtrlBusFIFOTransTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of sysUpTime at the time
that the system bus flow control FIFO threshold
is transitioned to lower value when the object value
of cc6kxbarFlowCtrlBusFIFOThrValue is 'lower'. This
object will take on the value of zero when the object
value of cc6kxbarFlowCtrlBusFIFOThrValue is
'original'."
::= { cc6kxbarFlowCtrlObjects 4 }
-- System Capacity Objects
cc6kxbarSysCapPfcOperMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
pfc3a(2),
pfc3b(3),
pfc3bxl(4),
pfc3cst1(5),
pfc3cxlst1(6),
pfc3c(7),
pfc3cxl(8),
pfc4(9),
pfc4xl(10),
pfc4xxl(11),
pfc4lite(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating mode of the policy feature
card (PFC).
unknown -- unknown.
pfc3a -- Policy feature card 3A.
pfc3b -- Policy feature card 3B.
pfc3bxl -- Policy feature card 3B XL.
pfc3cst1 -- Policy feature card 3C ST1.
pfc3cxlst1 -- Policy feature card 3C XL ST1.
pfc3c -- Policy feature card 3C.
pfc3cxl -- Policy feature card 3C XL.
pfc4 -- Policy feature card 4.
pfc4xl -- Policy feature card 4 XL.
pfc4xxl -- Policy feature card 4 XXL.
pfc4lite -- Policy feature card 4 Lite."
::= { cc6kxbarSystemCapacityObjects 1 }
cc6kxbarSysCapSwitchResTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarSysCapSwitchResEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cc6kxbarSysCapSwitchResTable entry lists
the capacity information of the switching
resources for ENTITY-MIB entPhysicalTable entries
of manageable components with type entPhysicalClass
module(9)."
::= { cc6kxbarSystemCapacityObjects 2 }
cc6kxbarSysCapSwitchResEntry OBJECT-TYPE
SYNTAX Cc6kxbarSysCapSwitchResEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cc6kxbarSysCapSwitchResEntry entry lists
the capacity information of the switching
resources for ENTITY-MIB entPhysicalTable entries
of manageable components with type entPhysicalClass
module(9).
Entries are created by the agent at the system power-up
or module insertion.
Entries are deleted by the agent upon module removal."
INDEX { entPhysicalIndex }
::= { cc6kxbarSysCapSwitchResTable 1 }
Cc6kxbarSysCapSwitchResEntry ::= SEQUENCE {
cc6kxbarSysCapSwitchResSeries INTEGER,
cc6kxbarSysCapSwitchResCefMode INTEGER
}
cc6kxbarSysCapSwitchResSeries OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
supervisor(2),
classic(3),
fabric(4),
dcef720(5),
cef720(6),
dcef256(7),
cef256(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the module series for traffic forwarding options.
unknown -- unknown.
supervisor -- supervisor module.
classic -- classic module.
fabric -- fabric module.
dcef720 -- dCEF720 module.
cef720 -- CEF720 module.
dcef256 -- dCEF256 module.
cef256 -- CEF256 module."
::= { cc6kxbarSysCapSwitchResEntry 1 }
cc6kxbarSysCapSwitchResCefMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
dcef(2),
cef(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Cisco Express Forwarding (CEF) mode of
the module.
notApplicable -- not applicable for this module.
dcef -- distributed CEF.
cef -- CEF."
::= { cc6kxbarSysCapSwitchResEntry 2 }
-- Fabric Error Recovery Objects
cc6kxbarErrRcvryThreshLink OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold on fabric link errors occurring
in a channel for the fabric error recovery feature."
::= { cc6kxbarErrorRecoveryObjects 1 }
cc6kxbarErrRcvryThreshPersLink OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold on persistent fabric link errors
occurring in a channel for the fabric error recovery feature."
::= { cc6kxbarErrorRecoveryObjects 2 }
cc6kxbarErrRcvrySwitchoverEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the switchover to the standby fabric module
is enabled or not on the detection of excessive fabric link
errors occurring in a channel for the fabric error recovery
feature."
::= { cc6kxbarErrorRecoveryObjects 3 }
cc6kxbarErrRcvryPersLinkResync OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the system will resync the channel or not
on the detection of excessive persistent fabric link errors
in a channel for the fabric error recovery feature."
::= { cc6kxbarErrorRecoveryObjects 4 }
cc6kxbarErrRcvryChResyncCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the consecutive number of times of
channel resync within the time interval as specified
by cc6kxbarErrRcvryChResyncInterval, over which
the channel resync is considered as failure
for the fabric error recovery feature."
::= { cc6kxbarErrorRecoveryObjects 5 }
cc6kxbarErrRcvryChResyncInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time interval for the consecutive
counting of channel resync for the fabric error
recovery feature."
::= { cc6kxbarErrorRecoveryObjects 6 }
-- Traffic Monitor Objects
cc6kxbarTMSwBusUtilEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the traffic monitor feature is
enabled on the switching bus or not."
::= { cc6kxbarTrafficMonitorSwBusObjects 1 }
cc6kxbarTMSwBusUtilInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval at the end of which
the switching bus traffic utilization is compared
against cc6kxbarTMSwBusUtilThreshold."
::= { cc6kxbarTrafficMonitorSwBusObjects 2 }
cc6kxbarTMSwBusUtilThreshold OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold of the switching bus
traffic utilization."
::= { cc6kxbarTrafficMonitorSwBusObjects 3 }
cc6kxbarTMSwBusUtilLogCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of times the following
events are logged for the switching bus:
1. the switching bus traffic utilization has
risen above the configured threshold (as
specified by cc6kxbarTMSwBusUtilThreshold),
or has kept staying above the configured
threshold at a logging interval (as specified
by cc6kxbarTMSwBusUtilLogInterval).
2. the switching bus traffic utilization
has fallen below the configured threshold."
::= { cc6kxbarTrafficMonitorSwBusObjects 4 }
cc6kxbarTMSwBusUtilLastLogTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last logging time of the
events as counted in cc6kxbarTMSwBusUtilLogCount.
This object will contain 0-1-1,00:00:00.0 when
the value of cc6kxbarTMSwBusUtilLogCount is zero."
::= { cc6kxbarTrafficMonitorSwBusObjects 5 }
cc6kxbarTMSwBusUtilLogInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logging interval if the switching
bus traffic utilization keeps staying above the
cc6kxbarTMSwBusUtilThreshold."
::= { cc6kxbarTrafficMonitorSwBusObjects 6 }
cc6kxbarTMSwBusUtilUtilization OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The switching bus traffic utilization included
in the notification currently being sent."
::= { cc6kxbarTrafficMonitorSwBusObjects 7 }
cc6kxbarTMSwBusUtilNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the generation of
c6kxbarTMSwBusUtilAboveNotif and
c6kxbarTMSwBusUtilBelowNotif notifications
is enabled or not.
When this object is 'true', the generation of
cc6kxbarTMSwBusUtilAboveNotif and
c6kxbarTMSwBusUtilBelowNotif notifications is
enabled. When this object is 'false', the
generation of cc6kxbarTMSwBusUtilAboveNotif and
c6kxbarTMSwBusUtilBelowNotif notifications
is disabled."
::= { cc6kxbarTrafficMonitorSwBusObjects 8 }
cc6kxbarTMChUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cc6kxbarTMChUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cc6kxbarTrafficMntrChUtilTable provides the
information on the traffic utilization of each
fabric channel associated with each module slot
for a given traffic direction in the chassis."
::= { cc6kxbarTrafficMonitorChObjects 1 }
cc6kxbarTMChUtilEntry OBJECT-TYPE
SYNTAX Cc6kxbarTMChUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cc6kxbarTMChUtilTable. Each traffic
direction for each fabric channel associated with
each module slot in the chassis will have an
entry in this table."
INDEX {
cc6kxbarTMChUtilModule,
cc6kxbarTMChUtilChannel,
cc6kxbarTMChUtilDirection
}
::= { cc6kxbarTMChUtilTable 1 }
Cc6kxbarTMChUtilEntry ::= SEQUENCE {
cc6kxbarTMChUtilModule ModuleSlotNumber,
cc6kxbarTMChUtilChannel FabricChannelNumber,
cc6kxbarTMChUtilDirection INTEGER,
cc6kxbarTMChUtilEnable TruthValue,
cc6kxbarTMChUtilInterval Unsigned32,
cc6kxbarTMChUtilThreshold Percent,
cc6kxbarTMChUtilLogCount Counter32,
cc6kxbarTMChUtilLastLogTime DateAndTime
}
cc6kxbarTMChUtilModule OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the module slot number in the chassis."
::= { cc6kxbarTMChUtilEntry 1 }
cc6kxbarTMChUtilChannel OBJECT-TYPE
SYNTAX FabricChannelNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the fabric channel number associated with
the corresponding cc6kxbarTMChUtilModule."
::= { cc6kxbarTMChUtilEntry 2 }
cc6kxbarTMChUtilDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the direction of traffic to be monitored."
::= { cc6kxbarTMChUtilEntry 3 }
cc6kxbarTMChUtilEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the traffic monitor feature is
enabled on a fabric channel for a given traffic
direction or not."
::= { cc6kxbarTMChUtilEntry 4 }
cc6kxbarTMChUtilInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval at the end of which the
traffic utilization on a fabric channel for a
given traffic direction is compared against
its corresponding cc6kxbarTMChUtilThreshold."
::= { cc6kxbarTMChUtilEntry 5 }
cc6kxbarTMChUtilThreshold OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold of the traffic utilization
on a fabric channel for a given traffic direction."
::= { cc6kxbarTMChUtilEntry 6 }
cc6kxbarTMChUtilLogCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of times the following
events are logged on a fabric channel
for a given direction.
1. the traffic utilization on a fabric channel
for a given traffic direction has risen above its
corresponding configured threshold (as specified
by cc6kxbarTMChUtilThreshold), or has kept
staying above the configured threshold at a
logging interval (as specified by
cc6kxbarTMChUtilLogInterval).
2. the traffic utilization on a fabric channel
for a given traffic direction has fallen below
its corresponding configured threshold."
::= { cc6kxbarTMChUtilEntry 7 }
cc6kxbarTMChUtilLastLogTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last logging time of the
events as counted in the corresponding
cc6kxbarTMChUtilLogCount on a fabric channel
for a given traffic direction.
This object will contain 0-1-1,00:00:00.0 when
the corresponding cc6kxbarTMChUtilLogCount is zero."
::= { cc6kxbarTMChUtilEntry 8 }
cc6kxbarTMChUtilLogInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logging interval if the traffic
utilization for a fabric channel on a given
traffic direction keeps staying above its
corresponding cc6kxbarTMChUtilThreshold."
::= { cc6kxbarTrafficMonitorChObjects 2 }
cc6kxbarTMChUtilUtilization OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The traffic utilization on a fabric channel
for a given traffic direction included in the
notification currently being sent."
::= { cc6kxbarTrafficMonitorChObjects 3 }
cc6kxbarTMChUtilNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the generation of
cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif
notifications is enabled or not.
When this object is 'true', the generation of
cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif
notifications is enabled. When this object is 'false',
the generation of cc6kxbarTMChUtilAboveNotif and
cc6kxbarTMChUtilBelowNotif notifications is disabled."
::= { cc6kxbarTrafficMonitorChObjects 4 }
-- Notifications
ciscoCat6kXbarMIBNotifs OBJECT IDENTIFIER
::= { ciscoCat6kCrossbarMIB 0 }
cc6kxbarSwBusStatusChangeNotif NOTIFICATION-TYPE
OBJECTS {
cc6kxbarSwBusSwitchingStatus,
cc6kxbarSwBusFailureDuration
}
STATUS current
DESCRIPTION
"A cc6kxbarSwBusStatusChangeNotif notification
is sent by the device when there is change
in switching status of the switching bus as
monitored by cc6kxbarSwBusSwitchingStatus."
::= { ciscoCat6kXbarMIBNotifs 1 }
cc6kxbarIntBusCRCErrExcdNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
entPhysicalVendorType
}
STATUS current
DESCRIPTION
"A cc6kxbarIntBusCRCThreshExcdNotif notification
is sent by the system when the system has
detected that the internal bus CRC error on
a physical entity (such as a module) as specified
by entPhysicalName has exceeded the fatal threshold."
::= { ciscoCat6kXbarMIBNotifs 2 }
cc6kxbarIntBusCRCErrRcvrdNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
entPhysicalVendorType
}
STATUS current
DESCRIPTION
"A cc6kxbarIntBusCRCErrRcvrdNotif notification
is sent by the system when the system has
recovered as the internal bus CRC error on
a physical entity (such as a module) as
specified by entPhysicalName has fallen below
the normal threshold."
::= { ciscoCat6kXbarMIBNotifs 3 }
cc6kxbarFlowCtrlBusThrExcdNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
entPhysicalVendorType
}
STATUS current
DESCRIPTION
"A cc6kxbarFlowCtrlBusThrExcdNotif notification
is sent by the system when the system detects the
first occurrence of the system bus flow control FIFO
threshold exceeding on a physical entity
(such as a module) over the system allowed limit
when the object value of
cc6kxbarFlowCtrlBusFIFOThrMode is 'auto'."
::= { ciscoCat6kXbarMIBNotifs 4 }
cc6kxbarTMSwBusUtilAboveNotif NOTIFICATION-TYPE
OBJECTS {
cc6kxbarTMSwBusUtilUtilization,
cc6kxbarTMSwBusUtilThreshold,
cc6kxbarTMSwBusUtilInterval,
entPhysicalDescr
}
STATUS current
DESCRIPTION
"This notification is sent when the switching bus
traffic utilization has risen above the configured
threshold (as specified by
cc6kxbarTMSwBusUtilThreshold), or has kept staying
above the configured threshold at a logging interval
(as specified by cc6kxbarTMSwBusUtilLogInterval).
The varbind entPhysicalDescr specifies the physical
entity (such as chassis) for which the
cc6kxbarTMSwBusUtilAboveNotif is sent."
::= { ciscoCat6kXbarMIBNotifs 5 }
cc6kxbarTMSwBusUtilBelowNotif NOTIFICATION-TYPE
OBJECTS {
cc6kxbarTMSwBusUtilUtilization,
cc6kxbarTMSwBusUtilThreshold,
cc6kxbarTMSwBusUtilInterval,
entPhysicalDescr
}
STATUS current
DESCRIPTION
"This notification is sent when the switching bus
traffic utilization has fallen below the configured
threshold (as specified by
cc6kxbarTMSwBusUtilThreshold). The varbind
entPhysicalDescr specifies the physical entity
(such as chassis) for which the
cc6kxbarTMSwBusUtilBelowNotif is sent."
::= { ciscoCat6kXbarMIBNotifs 6 }
cc6kxbarTMChUtilAboveNotif NOTIFICATION-TYPE
OBJECTS {
cc6kxbarTMChUtilUtilization,
cc6kxbarTMChUtilThreshold,
cc6kxbarTMChUtilInterval,
entPhysicalDescr
}
STATUS current
DESCRIPTION
"This notification is sent when the traffic
utilization on a fabric channel for a given
traffic direction has risen above its
corresponding configured threshold (as
specified by cc6kxbarTMChUtilThreshold), or has
kept staying above the configured threshold at a
logging interval (as specified by
cc6kxbarTMChUtilLogInterval). The varbind
entPhysicalDescr specifies the physical entity
(such as chassis) for which the
cc6kxbarTMChUtilAboveNotif is sent."
::= { ciscoCat6kXbarMIBNotifs 7 }
cc6kxbarTMChUtilBelowNotif NOTIFICATION-TYPE
OBJECTS {
cc6kxbarTMChUtilUtilization,
cc6kxbarTMChUtilThreshold,
cc6kxbarTMChUtilInterval,
entPhysicalDescr
}
STATUS current
DESCRIPTION
"This notification is sent when the traffic
utilization on a fabric channel for a given
traffic direction has fallen below its
corresponding configured threshold (as
specified by cc6kxbarTMChUtilThreshold). The
varbind entPhysicalDescr specifies the
physical entity (such as chassis) for which
the cc6kxbarTMChUtilBelowNotif is sent."
::= { ciscoCat6kXbarMIBNotifs 8 }
-- Conformance and Compliance
cc6kxbarMIBConformance OBJECT IDENTIFIER
::= { ciscoCat6kCrossbarMIB 3 }
cc6kxbarMIBCompliances OBJECT IDENTIFIER
::= { cc6kxbarMIBConformance 1 }
cc6kxbarMIBGroups OBJECT IDENTIFIER
::= { cc6kxbarMIBConformance 2 }
-- Conformance
cc6kxbarMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroup,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroup
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support busonly mode feature."
::= { cc6kxbarMIBCompliances 2 }
cc6kxbarMIBComplianceVer1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
::= { cc6kxbarMIBCompliances 3 }
cc6kxbarMIBComplianceVer2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
::= { cc6kxbarMIBCompliances 4 }
cc6kxbarMIBComplianceVer3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus notifications."
GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error notifications."
::= { cc6kxbarMIBCompliances 5 }
cc6kxbarMIBComplianceVer4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus notifications."
GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error notifications."
GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error status."
::= { cc6kxbarMIBCompliances 6 }
cc6kxbarMIBComplianceVer5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus notifications."
GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error notifications."
GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error status."
GROUP cc6kxbarDcefOnlyModeAllowedGroup
DESCRIPTION
"This group is mandatory only for platforms which support
dcef only mode feature."
GROUP cc6kxbarForceBusModeGroup
DESCRIPTION
"This group is mandatory only for platforms which support
force bus mode feature."
GROUP cc6kxbarFlowCtrlNotifCtrlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system flow control notification control."
GROUP cc6kxbarFlowCtrlBusThreshGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold configuration."
GROUP cc6kxbarFlowCtrlBusThrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold exceeding
notification."
GROUP cc6kxbarBusOnlyModeOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational bus mode."
::= { cc6kxbarMIBCompliances 7 }
cc6kxbarMIBComplianceVer6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus notifications."
GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error notifications."
GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error status."
GROUP cc6kxbarDcefOnlyModeAllowedGroup
DESCRIPTION
"This group is mandatory only for platforms which support
dcef only mode feature."
GROUP cc6kxbarForceBusModeGroup
DESCRIPTION
"This group is mandatory only for platforms which support
force bus mode feature."
GROUP cc6kxbarFlowCtrlNotifCtrlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system flow control notification control."
GROUP cc6kxbarFlowCtrlBusThreshGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold configuration."
GROUP cc6kxbarFlowCtrlBusThrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold exceeding
notification."
GROUP cc6kxbarBusOnlyModeOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational bus mode."
GROUP cc6kxbarSysCapPfcOperModeGroup
DESCRIPTION
"This group is mandatory only for platforms which
support the system information of PFC operational mode."
GROUP cc6kxbarSysCapSwitchResGroup
DESCRIPTION
"This group is mandatory only for platforms which
support the capacity information of switching
resources in the system."
GROUP cc6kxbarChannelUtilGroup1
DESCRIPTION
"This group is mandatory only for those platforms which
support peak input and output traffic utilization on the
fabric channel."
GROUP cc6kxbarSwBusGroup1
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus utilization."
GROUP cc6kxbarErrorGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support error statistics on the fabric channel."
GROUP cc6kxbarErrRcvryThresholdGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of thresholds on fabric link errors
for the fabric error recovery feature."
GROUP cc6kxbarErrRcvrySwitchoverGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of fabric switchover on excessive fabric
link errors for the fabric error recovery feature."
::= { cc6kxbarMIBCompliances 8 }
cc6kxbarMIBComplianceVer7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus notifications."
GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error notifications."
GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error status."
GROUP cc6kxbarDcefOnlyModeAllowedGroup
DESCRIPTION
"This group is mandatory only for platforms which support
dcef only mode feature."
GROUP cc6kxbarForceBusModeGroup
DESCRIPTION
"This group is mandatory only for platforms which support
force bus mode feature."
GROUP cc6kxbarFlowCtrlNotifCtrlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system flow control notification control."
GROUP cc6kxbarFlowCtrlBusThreshGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold configuration."
GROUP cc6kxbarFlowCtrlBusThrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold exceeding
notification."
GROUP cc6kxbarBusOnlyModeOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational bus mode."
GROUP cc6kxbarSysCapPfcOperModeGroup
DESCRIPTION
"This group is mandatory only for platforms which
support the system information of PFC operational mode."
GROUP cc6kxbarSysCapSwitchResGroup
DESCRIPTION
"This group is mandatory only for platforms which
support the capacity information of switching
resources in the system."
GROUP cc6kxbarChannelUtilGroup1
DESCRIPTION
"This group is mandatory only for those platforms which
support peak input and output traffic utilization on the
fabric channel."
GROUP cc6kxbarSwBusGroup1
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus utilization."
GROUP cc6kxbarErrorGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support error statistics on the fabric channel."
GROUP cc6kxbarErrRcvryThresholdGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of thresholds on fabric link errors
for the fabric error recovery feature."
GROUP cc6kxbarErrRcvrySwitchoverGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of fabric switchover on excessive fabric
link errors for the fabric error recovery feature."
GROUP cc6kxbarErrRcvryPersLinkResGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of channel resync on excessive
persistent fabric link errors for the fabric error
recovery feature."
GROUP cc6kxbarErrRcvryChResyncGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of channel resync threshold for the
fabric error recovery feature."
GROUP cc6kxbarTMSwBusUtilGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration for traffic monitor feature on the
switching bus."
GROUP cc6kxbarTMSwBusUtilNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the notification control for traffic monitor
notifications on the switching bus."
GROUP cc6kxbarTMSwBusUtilNotifObjectGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on the switching bus."
GROUP cc6kxbarTMSwBusUtilNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on the switching bus."
GROUP cc6kxbarTMChUtilGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration for traffic monitor feature on
fabric channels."
GROUP cc6kxbarTMChUtilNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the notification control for traffic monitor
notifications on fabric channels."
GROUP cc6kxbarTMChUtilNotifObjectGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on fabric channels."
GROUP cc6kxbarTMChUtilNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on fabric channels."
::= { cc6kxbarMIBCompliances 9 }
cc6kxbarMIBComplianceVer8 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}
GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."
GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support bus only mode feature."
GROUP cc6kxbarLcdBannerGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support lcd banner feature."
GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fabric channel speed feature."
GROUP cc6kxbarSwBusGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection feature."
GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."
GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus notifications."
GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error notifications."
GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION
"This group is mandatory only for platforms which support
internal bus CRC error status."
GROUP cc6kxbarDcefOnlyModeAllowedGroup
DESCRIPTION
"This group is mandatory only for platforms which support
dcef only mode feature."
GROUP cc6kxbarForceBusModeGroup
DESCRIPTION
"This group is mandatory only for platforms which support
force bus mode feature."
GROUP cc6kxbarFlowCtrlNotifCtrlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system flow control notification control."
GROUP cc6kxbarFlowCtrlBusThreshGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold configuration."
GROUP cc6kxbarFlowCtrlBusThrNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold exceeding
notification."
GROUP cc6kxbarBusOnlyModeOperGroup
DESCRIPTION
"This group is mandatory only for platforms which support
operational bus mode."
GROUP cc6kxbarSysCapPfcOperModeGroup
DESCRIPTION
"This group is mandatory only for platforms which
support the system information of PFC operational mode."
GROUP cc6kxbarSysCapSwitchResGroup
DESCRIPTION
"This group is mandatory only for platforms which
support the capacity information of switching
resources in the system."
GROUP cc6kxbarChannelUtilGroup1
DESCRIPTION
"This group is mandatory only for those platforms which
support peak input and output traffic utilization on the
fabric channel."
GROUP cc6kxbarSwBusGroup1
DESCRIPTION
"This group is mandatory only for platforms which support
switching bus utilization."
GROUP cc6kxbarErrorGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support error statistics on the fabric channel."
GROUP cc6kxbarErrRcvryThresholdGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of thresholds on fabric link errors
for the fabric error recovery feature."
GROUP cc6kxbarErrRcvrySwitchoverGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of fabric switchover on excessive fabric
link errors for the fabric error recovery feature."
GROUP cc6kxbarErrRcvryPersLinkResGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of channel resync on excessive
persistent fabric link errors for the fabric error
recovery feature."
GROUP cc6kxbarErrRcvryChResyncGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration of channel resync threshold for the
fabric error recovery feature."
GROUP cc6kxbarTMSwBusUtilGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration for traffic monitor feature on the
switching bus."
GROUP cc6kxbarTMSwBusUtilNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the notification control for traffic monitor
notifications on the switching bus."
GROUP cc6kxbarTMSwBusUtilNotifObjectGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on the switching bus."
GROUP cc6kxbarTMSwBusUtilNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on the switching bus."
GROUP cc6kxbarTMChUtilGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the configuration for traffic monitor feature on
fabric channels."
GROUP cc6kxbarTMChUtilNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which provide
the notification control for traffic monitor
notifications on fabric channels."
GROUP cc6kxbarTMChUtilNotifObjectGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on fabric channels."
GROUP cc6kxbarTMChUtilNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support
traffic monitor notifications on fabric channels."
GROUP cc6kxbarStatisticsLbusDropGroup
DESCRIPTION
"This group is mandatory for platforms which support
local bus packet drop statistics on fabric channels."
::= { cc6kxbarMIBCompliances 10 }
-- Units of Conformance
cc6kxbarModuleStatusGroup OBJECT-GROUP
OBJECTS {
cc6kxbarLcdBannerMaxSize,
cc6kxbarLcdBannerBanner,
cc6kxbarTruncatedModeAllowed,
cc6kxbarMinFabricPresent,
cc6kxbarFabricActiveSlot,
cc6kxbarFabricBackupSlot,
cc6kxbarModuleModeSwitchingMode
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing
configuration and operation of the crossbar
switching fabric module and switching capable
module.
cc6kxbarModuleStatusGroup object is superseded by cc6kxbarModuleStatusGroupVer1."
::= { cc6kxbarMIBGroups 1 }
cc6kxbarChannelStatusGroup OBJECT-GROUP
OBJECTS {
cc6kxbarModuleChannelModStatus,
cc6kxbarModuleChannelFabStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing
status and configuration of the fabric channel."
::= { cc6kxbarMIBGroups 2 }
cc6kxbarChannelStatisticsGroup OBJECT-GROUP
OBJECTS {
cc6kxbarStatisticsInErrors,
cc6kxbarStatisticsOutErrors,
cc6kxbarStatisticsOutDropped,
cc6kxbarStatisticsInUtil,
cc6kxbarStatisticsOutUtil
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing statistics for
the fabric channel.
cc6kxbarChannelStatisticsGroup object is superseded by cc6kxbarChannelStatisticsGroupVer1."
::= { cc6kxbarMIBGroups 3 }
cc6kxbarFallbackGroup OBJECT-GROUP
OBJECTS { cc6kxbarFallbackMode }
STATUS current
DESCRIPTION
"This object controls system fallback to bus-mode
after loss of switching fabric module."
::= { cc6kxbarMIBGroups 4 }
cc6kxbarBusOnlyAllowedGroup OBJECT-GROUP
OBJECTS { cc6kxbarBusOnlyModeAllowed }
STATUS current
DESCRIPTION
"This object determines the value of
cc6kxbarModuleModeSwitchingMode of each module."
::= { cc6kxbarMIBGroups 5 }
cc6kxbarModuleStatusGroupVer1 OBJECT-GROUP
OBJECTS {
cc6kxbarTruncatedModeAllowed,
cc6kxbarMinFabricPresent,
cc6kxbarFabricActiveSlot,
cc6kxbarFabricBackupSlot,
cc6kxbarModuleModeSwitchingMode
}
STATUS current
DESCRIPTION
"A collection of objects providing
configuration and operation of the crossbar
switching fabric module and switching capable
module."
::= { cc6kxbarMIBGroups 6 }
cc6kxbarChannelStatisticsGroupVer1 OBJECT-GROUP
OBJECTS {
cc6kxbarStatisticsInErrors,
cc6kxbarStatisticsOutErrors,
cc6kxbarStatisticsOutDropped
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics for
the fabric channel."
::= { cc6kxbarMIBGroups 7 }
cc6kxbarLcdBannerGroup OBJECT-GROUP
OBJECTS {
cc6kxbarLcdBannerMaxSize,
cc6kxbarLcdBannerBanner
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration of
the lcd Banner of the fabric module."
::= { cc6kxbarMIBGroups 8 }
cc6kxbarChannelUtilGroup OBJECT-GROUP
OBJECTS {
cc6kxbarStatisticsInUtil,
cc6kxbarStatisticsOutUtil
}
STATUS current
DESCRIPTION
"These object determines Input and Output Utilization of the
fabric channel."
::= { cc6kxbarMIBGroups 9 }
cc6kxbarChannelSpeedGroup OBJECT-GROUP
OBJECTS { cc6kxbarModuleChannelSpeed }
STATUS current
DESCRIPTION
"A collection of objects providing the
speed of the fabric channel."
::= { cc6kxbarMIBGroups 10 }
cc6kxbarSwBusGroup OBJECT-GROUP
OBJECTS {
cc6kxbarSwBusSwitchingStatus,
cc6kxbarSwBusFailureDuration,
cc6kxbarSwBusNotifEnable
}
STATUS current
DESCRIPTION
"A collection of objects for the switching bus switching
detection feature."
::= { cc6kxbarMIBGroups 11 }
cc6kxbarSwBusNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cc6kxbarSwBusStatusChangeNotif }
STATUS current
DESCRIPTION
"A collection of notifications for the switching
bus switching detection feature."
::= { cc6kxbarMIBGroups 12 }
cc6kxbarTruncatedOperGroup OBJECT-GROUP
OBJECTS { cc6kxbarTruncatedModeOper }
STATUS current
DESCRIPTION
"A collection of objects providing the
operational truncated mode."
::= { cc6kxbarMIBGroups 13 }
cc6kxbarIntBusNotifControlGroup OBJECT-GROUP
OBJECTS { cc6kxbarIntBusNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects to control the notification
generation for internal bus."
::= { cc6kxbarMIBGroups 14 }
cc6kxbarIntBusCRCErrNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cc6kxbarIntBusCRCErrExcdNotif,
cc6kxbarIntBusCRCErrRcvrdNotif
}
STATUS current
DESCRIPTION
"A collection of notifications for the
internal bus CRC error."
::= { cc6kxbarMIBGroups 15 }
cc6kxbarIntBusCRCErrGroup OBJECT-GROUP
OBJECTS {
cc6kxbarIntBusCRCErrExcdStatus,
cc6kxbarIntBusCRCErrExcdCount
}
STATUS current
DESCRIPTION
"A collection of objects to indicate the internal bus
CRC error information on a physical entity."
::= { cc6kxbarMIBGroups 16 }
cc6kxbarDcefOnlyModeAllowedGroup OBJECT-GROUP
OBJECTS { cc6kxbarDcefOnlyModeAllowed }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
and information about the dcef only mode feature."
::= { cc6kxbarMIBGroups 17 }
cc6kxbarForceBusModeGroup OBJECT-GROUP
OBJECTS { cc6kxbarForceBusMode }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
and information about the force bus mode feature."
::= { cc6kxbarMIBGroups 18 }
cc6kxbarFlowCtrlNotifCtrlGroup OBJECT-GROUP
OBJECTS { cc6kxbarFlowCtrlNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects to control the notification
generation for the system flow control feature."
::= { cc6kxbarMIBGroups 19 }
cc6kxbarFlowCtrlBusThreshGroup OBJECT-GROUP
OBJECTS {
cc6kxbarFlowCtrlBusFIFOThrMode,
cc6kxbarFlowCtrlBusFIFOThrValue,
cc6kxbarFlowCtrlBusFIFOTransTime
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration
information about the system bus flow control FIFO
threshold."
::= { cc6kxbarMIBGroups 20 }
cc6kxbarFlowCtrlBusThrNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cc6kxbarFlowCtrlBusThrExcdNotif }
STATUS current
DESCRIPTION
"A collection of notifications for the system bus
flow control FIFO threshold exceeding."
::= { cc6kxbarMIBGroups 21 }
cc6kxbarBusOnlyModeOperGroup OBJECT-GROUP
OBJECTS { cc6kxbarBusOnlyModeOper }
STATUS current
DESCRIPTION
"A collection of objects providing the
operational bus mode."
::= { cc6kxbarMIBGroups 22 }
cc6kxbarSysCapPfcOperModeGroup OBJECT-GROUP
OBJECTS { cc6kxbarSysCapPfcOperMode }
STATUS current
DESCRIPTION
"A collection of objects providing the system
information of PFC operational mode."
::= { cc6kxbarMIBGroups 23 }
cc6kxbarSysCapSwitchResGroup OBJECT-GROUP
OBJECTS {
cc6kxbarSysCapSwitchResSeries,
cc6kxbarSysCapSwitchResCefMode
}
STATUS current
DESCRIPTION
"A collection of objects providing the capacity
information of switching resources in the system."
::= { cc6kxbarMIBGroups 24 }
cc6kxbarChannelUtilGroup1 OBJECT-GROUP
OBJECTS {
cc6kxbarStatisticsPeakInUtil,
cc6kxbarStatisticsPeakTmInUtil,
cc6kxbarStatisticsPeakOutUtil,
cc6kxbarStatisticsPeakTmOutUtil
}
STATUS current
DESCRIPTION
"A collection of objects providing the information about peak
input and output utilization of a specific fabric channel on
a specific module."
::= { cc6kxbarMIBGroups 25 }
cc6kxbarSwBusGroup1 OBJECT-GROUP
OBJECTS {
cc6kxbarSwBusUtilization,
cc6kxbarSwBusPeakUtilization,
cc6kxbarSwBusPeakTimeUtil
}
STATUS current
DESCRIPTION
"A collection of objects providing the information about
switching bus utilization."
::= { cc6kxbarMIBGroups 26 }
cc6kxbarErrorGroup OBJECT-GROUP
OBJECTS {
cc6kxbarErrorModuleCrc,
cc6kxbarErrorModuleHbeat,
cc6kxbarErrorModuleSync,
cc6kxbarErrorModuleDDRSync,
cc6kxbarErrorChannelSync,
cc6kxbarErrorChannelBuffer,
cc6kxbarErrorChannelTimeout
}
STATUS current
DESCRIPTION
"A collection of objects providing error statistics for
a specific fabric channel on a specific module."
::= { cc6kxbarMIBGroups 27 }
cc6kxbarErrRcvryThresholdGroup OBJECT-GROUP
OBJECTS {
cc6kxbarErrRcvryThreshLink,
cc6kxbarErrRcvryThreshPersLink
}
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
of thresholds on fabric link errors for the fabric
error recovery feature."
::= { cc6kxbarMIBGroups 28 }
cc6kxbarErrRcvrySwitchoverGroup OBJECT-GROUP
OBJECTS { cc6kxbarErrRcvrySwitchoverEnable }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
of fabric switchover on excessive fabric link errors
for the fabric error recovery feature."
::= { cc6kxbarMIBGroups 29 }
cc6kxbarErrRcvryPersLinkResGroup OBJECT-GROUP
OBJECTS { cc6kxbarErrRcvryPersLinkResync }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
of channel resync on excessive persistent fabric link
errors for the fabric error recovery feature."
::= { cc6kxbarMIBGroups 30 }
cc6kxbarErrRcvryChResyncGroup OBJECT-GROUP
OBJECTS {
cc6kxbarErrRcvryChResyncCount,
cc6kxbarErrRcvryChResyncInterval
}
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
for channel resync threshold for the fabric error
recovery feature."
::= { cc6kxbarMIBGroups 31 }
cc6kxbarTMSwBusUtilGroup OBJECT-GROUP
OBJECTS {
cc6kxbarTMSwBusUtilEnable,
cc6kxbarTMSwBusUtilInterval,
cc6kxbarTMSwBusUtilThreshold,
cc6kxbarTMSwBusUtilLogCount,
cc6kxbarTMSwBusUtilLastLogTime,
cc6kxbarTMSwBusUtilLogInterval
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration
information for traffic monitor feature on
the switching bus."
::= { cc6kxbarMIBGroups 32 }
cc6kxbarTMSwBusUtilNotifControlGroup OBJECT-GROUP
OBJECTS { cc6kxbarTMSwBusUtilNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects to control the traffic monitor
notification generation on the switching bus."
::= { cc6kxbarMIBGroups 33 }
cc6kxbarTMSwBusUtilNotifObjectGroup OBJECT-GROUP
OBJECTS { cc6kxbarTMSwBusUtilUtilization }
STATUS current
DESCRIPTION
"A collection of objects included in the traffic monitor
notifications on the switching bus."
::= { cc6kxbarMIBGroups 34 }
cc6kxbarTMSwBusUtilNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cc6kxbarTMSwBusUtilAboveNotif,
cc6kxbarTMSwBusUtilBelowNotif
}
STATUS current
DESCRIPTION
"A collection of traffic monitor notifications on the
switching bus."
::= { cc6kxbarMIBGroups 35 }
cc6kxbarTMChUtilGroup OBJECT-GROUP
OBJECTS {
cc6kxbarTMChUtilEnable,
cc6kxbarTMChUtilInterval,
cc6kxbarTMChUtilThreshold,
cc6kxbarTMChUtilLogCount,
cc6kxbarTMChUtilLastLogTime,
cc6kxbarTMChUtilLogInterval
}
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
information for traffic monitor feature on fabric
channels."
::= { cc6kxbarMIBGroups 36 }
cc6kxbarTMChUtilNotifControlGroup OBJECT-GROUP
OBJECTS { cc6kxbarTMChUtilNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects to control the traffic monitor
notification generation on fabric channels."
::= { cc6kxbarMIBGroups 37 }
cc6kxbarTMChUtilNotifObjectGroup OBJECT-GROUP
OBJECTS { cc6kxbarTMChUtilUtilization }
STATUS current
DESCRIPTION
"A collection of objects included in the traffic monitor
notifications on fabric channels."
::= { cc6kxbarMIBGroups 38 }
cc6kxbarTMChUtilNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cc6kxbarTMChUtilAboveNotif,
cc6kxbarTMChUtilBelowNotif
}
STATUS current
DESCRIPTION
"A collection of traffic monitor notifications on
fabric channels."
::= { cc6kxbarMIBGroups 39 }
cc6kxbarStatisticsLbusDropGroup OBJECT-GROUP
OBJECTS { cc6kxbarStatisticsLbusDrops }
STATUS current
DESCRIPTION
"A collection of objects providing information for
local bus drop packets statistics."
::= { cc6kxbarMIBGroups 40 }
END
Reference in New Issue View Git Blame Copy Permalink