mibs/MIBS/cisco/CISCO-DIAL-CONTROL-MIB
2023-12-05 12:25:34 +01:00

721 lines
27 KiB
Plaintext

-- *****************************************************************
-- The CISCO dial control mib. This is an extension to the RFC 2128.
--
-- Bibek Das, January, 1998
--
-- Copyright (c) 1998, 1999-2001, 2002, 2003, 2005 by
-- cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib is an extension to the RFC 2128
--
-- The RFC 2128 (Dial Control Mib) defines callHistoryTable, which is
-- the table that stores past call information. Unfortunately, the indices
-- to this table (callActiveSetupTime, callActiveIndex) are not appropriate
-- for the NMS to retrieve information on regular intervals.
--
-- The following changes in the RFC2128 will fix the INDEX of the
-- callHistoryTable. This will also make the mib useful for various types
-- of calls, including ISDN data, voice, modem. VoIP etc. Right now, the
-- NMS needs to poll three different mibs (CISCO-CALL-HISTORY-MIB.my,
-- CISCO-POP-MGMT-MIB.my and the DIAL-CONTROL-MIB.my) for these calls.
--
CISCO-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DisplayString,
TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoExperiment
FROM CISCO-SMI
AbsoluteCounter32
FROM DIAL-CONTROL-MIB
InterfaceIndexOrZero
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
ciscoDialControlMib MODULE-IDENTITY
LAST-UPDATED "200505260000Z"
ORGANIZATION "Cisco systems, Inc."
CONTACT-INFO
" Bibek Das
Postal: cisco Systems
170 West Tasman Drive
San Jose, CA 95134
U.S.A.
Phone: +1 408 526 5225
E-mail: cs-isdn@cisco.com"
DESCRIPTION
"The MIB module to describe call history information for
demand access and possibly other kinds of interfaces."
REVISION "200505260000Z"
DESCRIPTION
"Modified DESCRIPTION of cPeerSearchType object.
"
REVISION "200307100001Z"
DESCRIPTION
"1) Changed the SYNTAX of cCallHistoryLogicalIfIndex
to be InterfaceIndexOrZero instead of
InterfaceIndex.
2) Modified the DESCRIPTION of
cCallHistoryLogicalIfIndex."
REVISION "200208210001Z"
DESCRIPTION
"1) Deprecated ciscoDialControlMibComplianceRev3
2) Added a new table cCallHistoryIecTable
3) Added a new module-compliance
ciscoDialControlMibComplianceRev4
4) Added gatekeeper and externalGKTMPServer enum labels
to cCallHistoryReleaseSrc
5) Added cCallHistoryIecGroup OBJECT-GROUP."
REVISION "200205240001Z"
DESCRIPTION
"1) Deprecated ciscoDialControlMibComplianceRev2
2) Added a new object subtree (OID)
cPeerGlobalConfiguration
3) Added a new object cPeerSearchType
4) Added a new object-group cPeerGlobalConfigurationGroup
5) Added a new module-compliance
ciscoDialControlMibComplianceRev3."
REVISION "200202201546Z"
DESCRIPTION
"1) Deprecated cCallHistoryReleaseSource
2) Deprecated cCallHistoryGroupRev1
3) Deprecated ciscoDialControlMibComplianceRev1
3) Added a new object cCallHistoryReleaseSrc
4) Added a new object cCallHistoryGroupRev2
6) Added a new object ciscoDialControlMibComplianceRev2."
REVISION "200112131546Z"
DESCRIPTION
"Added a new object cCallHistoryReleaseSource in
CallHistory table."
REVISION "9801161546Z"
DESCRIPTION
"The initial version of the mib."
::= { ciscoExperiment 25 }
-- Cisco Dial Control Mib objects definitions
ciscoDialControlMibObjects OBJECT IDENTIFIER ::= { ciscoDialControlMib 1 }
--
-- the call history group
--
cCallHistory OBJECT IDENTIFIER ::= { ciscoDialControlMibObjects 4 }
-- cCallHistoryTable
-- Table to store the past call information. The Destination number
-- and the call connect and disconnect time, the disconnection cause
-- are stored. These calls could be circuit switched or they could
-- be virtual circuits. History of each and every call is stored,
-- of successful calls as well as of unsuccessful and rejected calls.
-- An entry will be created when a call is cleared.
-- The upper limit to the number of entries in this table is given
-- by callHistoryTableMaxLength, defined in RFC 2128.
-- The minimum time that an entry can be retained in this table is
-- given by callHistoryRetainTimer, defined in RFC 2128.
cCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about specific
calls to a specific destination."
::= { cCallHistory 3 }
cCallHistoryEntry OBJECT-TYPE
SYNTAX CCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single Connection."
INDEX { cCallHistoryIndex }
::= { cCallHistoryTable 1 }
CCallHistoryEntry ::=
SEQUENCE {
cCallHistoryIndex Unsigned32,
cCallHistorySetupTime TimeStamp,
cCallHistoryPeerAddress DisplayString,
cCallHistoryPeerSubAddress DisplayString,
cCallHistoryPeerId INTEGER,
cCallHistoryPeerIfIndex INTEGER,
cCallHistoryLogicalIfIndex InterfaceIndexOrZero,
cCallHistoryDisconnectCause OCTET STRING,
cCallHistoryDisconnectText DisplayString,
cCallHistoryConnectTime TimeStamp,
cCallHistoryDisconnectTime TimeStamp,
cCallHistoryCallOrigin INTEGER,
cCallHistoryChargedUnits AbsoluteCounter32,
cCallHistoryInfoType INTEGER,
cCallHistoryTransmitPackets AbsoluteCounter32,
cCallHistoryTransmitBytes AbsoluteCounter32,
cCallHistoryReceivePackets AbsoluteCounter32,
cCallHistoryReceiveBytes AbsoluteCounter32,
cCallHistoryReleaseSource INTEGER,
cCallHistoryReleaseSrc INTEGER
}
cCallHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A monotonically increasing integer for the sole purpose of
indexing call disconnection events. When it reaches the
maximum value, an extremely unlikely event, the agent wraps
the value back to 1 and may flush existing entries."
::= { cCallHistoryEntry 1 }
cCallHistorySetupTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call setup was started.
This will be useful for an NMS to sort the call history
entry with call setup time. Also, this object
can be useful in finding large delays between the time the
call was started and the time the call was connected.
For ISDN media, this will be the time when the setup
message was received from or sent to the network.
The value of this object is the same as callActiveSetupTime
in the callActiveTable"
::= { cCallHistoryEntry 2 }
cCallHistoryPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number this call was connected to. If the number is
not available, then it will have a length of zero."
::= { cCallHistoryEntry 3 }
cCallHistoryPeerSubAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subaddress this call was connected to. If the subaddress
is undefined or not available, this will be a zero length
string."
::= { cCallHistoryEntry 4 }
cCallHistoryPeerId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Id value of the peer table entry
to which this call was made. If a peer table entry
for this call does not exist, the value of this object
will be zero."
::= { cCallHistoryEntry 5 }
cCallHistoryPeerIfIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ifIndex value of the peer table entry
to which this call was made. If a peer table entry
for this call does not exist, the value of this object
will be zero."
::= { cCallHistoryEntry 6 }
cCallHistoryLogicalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ifIndex value of the logical interface through
which this call was made. For ISDN media, this would be
the ifIndex of the B channel which was used for this call.
If the ifIndex value is unknown, the value of this object
will be zero. For an IP call, the value will be zero."
::= { cCallHistoryEntry 7 }
cCallHistoryDisconnectCause OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encoded network cause value associated with this call.
The value of this object will depend on the interface type
as well as on the protocol and protocol version being
used on this interface. Some references for possible cause
values are given below."
REFERENCE
"- Bellcore SR-NWT-001953, Generic Guidelines for
ISDN Terminal Equipment On Basic Access Interfaces,
chapter 5.2.5.8.
- Bellcore SR-NWT-002343, ISDN Primary Rate Interface
Generic Guidelines for Customer Premises Equipment,
chapter 8.2.5.8.
- ITU-T Q.931, Appendix I.
- ITU-T X.25, CAUSE and DIAGNOSTIC field values.
- German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4."
::= { cCallHistoryEntry 8 }
cCallHistoryDisconnectText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ASCII text describing the reason for call termination.
This object exists because it would be impossible for
a management station to store all possible cause values
for all types of interfaces. It should be used only if
a management station is unable to decode the value of
dialCtlPeerStatsLastDisconnectCause."
::= { cCallHistoryEntry 9 }
cCallHistoryConnectTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was connected."
::= { cCallHistoryEntry 10 }
cCallHistoryDisconnectTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was disconnected."
::= { cCallHistoryEntry 11 }
cCallHistoryCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2),
callback(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call origin."
::= { cCallHistoryEntry 12 }
cCallHistoryChargedUnits OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero."
::= { cCallHistoryEntry 13 }
cCallHistoryInfoType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- e.g. for non-isdn media
speech(2),
unrestrictedDigital(3), -- 64k/s data
unrestrictedDigital56(4), -- with 56k rate adaption
restrictedDigital(5),
audio31(6), -- 3.1 kHz audio
audio7(7), -- 7 kHz audio
video(8),
packetSwitched(9),
fax(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information type for this call."
::= { cCallHistoryEntry 14 }
cCallHistoryTransmitPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were transmitted while this
call was active."
::= { cCallHistoryEntry 15 }
cCallHistoryTransmitBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were transmitted while this
call was active."
::= { cCallHistoryEntry 16 }
cCallHistoryReceivePackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were received while this
call was active."
::= { cCallHistoryEntry 17 }
cCallHistoryReceiveBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were received while this
call was active."
::= { cCallHistoryEntry 18 }
cCallHistoryReleaseSource OBJECT-TYPE
SYNTAX INTEGER {
callingPartyInPstn(1),
callingPartyInVoip(2),
calledPartyInPstn(3),
calledPartyInVoip(4),
internalRelease(5),
internalCallControlApp(6), -- for e.g. TCL or VXML script
consoleCommand(7), -- for e.g. CLI or MML
externalRadiusServer(8),
externalNmsApp(9),
externalCallControlAgent(10) -- for e.g. GATEKEEPER
}
MAX-ACCESS read-only
STATUS deprecated -- superseded by cCallHistoryReleaseSrc
DESCRIPTION "Originator of the call release."
::= { cCallHistoryEntry 19 }
cCallHistoryReleaseSrc OBJECT-TYPE
SYNTAX INTEGER {
callingPartyInPstn(1),
callingPartyInVoip(2),
calledPartyInPstn(3),
calledPartyInVoip(4),
internalReleaseInPotsLeg(5),
internalReleaseInVoipLeg(6),
internalCallControlApp(7),
internalReleaseInVoipAAA(8),
consoleCommand(9),
externalRadiusServer(10),
externalNmsApp(11),
externalCallControlAgent(12),
gatekeeper(13),
externalGKTMPServer(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Originator of the call release. Indicates the source of
the call release as follows :
1) callingPartyInPstn : Calling party in PSTN.
2) callingPartyInVoip : Calling party in VoIP.
3) calledPartyInPstn : Called party in PSTN.
4) calledPartyInVoip : Called party in VoIP.
5) internalReleaseInPotsLeg : Due to an internal error
in Telephony call leg.
6) internalReleaseInVoipLeg : Due to an internal error
in VoIP call leg.
7) internalCallControlApp : Due to an internal error
in Session Application or Tcl or VXML script originated
release.
8) internalReleaseInVoipAAA : Due to an internal error
in VoIP AAA module.
9) consoleCommand : Due to CLI or MML.
10) externalRadiusServer : Call failed during authorization
, authentication or due to receipt of POD from the
RADIUS server.
11) externalNmsApp : Due to SNMP request to clear
the call.
12) externalCallControlAgent : External Call Control Agent
initiated clear.
13) gatekeeper : Gatekeeper initiated clear due to receipt
of Admission Reject, Disengage Request message.
14) externalGKTMPServer : External GKTMP server initiated
clear due to receipt of Admission Reject message from
the gatekeeper, triggered by RESPONSE.ARJ message from
the GKTMP server."
::= { cCallHistoryEntry 20 }
-- cCallHistoryIecTable
-- Table to store one or more Internal Error Codes.
-- These IECs are generated if a call fails.
cCallHistoryIecTable OBJECT-TYPE
SYNTAX SEQUENCE OF CCallHistoryIecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about Internal Error
Code(s) (IEC) which caused the call to fail."
::= { cCallHistory 4 }
cCallHistoryIecEntry OBJECT-TYPE
SYNTAX CCallHistoryIecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IEC information regarding a single call."
INDEX { cCallHistoryIndex, cCallHistoryIecIndex }
::= { cCallHistoryIecTable 1 }
CCallHistoryIecEntry ::=
SEQUENCE {
cCallHistoryIecIndex Unsigned32,
cCallHistoryIec SnmpAdminString
}
cCallHistoryIecIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to index one or more IECs in the
context of a single call. In most cases there will
only be one IEC when a call fails. However, it is
possible for the software processing the call to
generate multiple IECs before the call ultimately fails.
In that scenario, there will be multiple entries in
this table related to a single call (cCallHistoryIndex)
and this object will serve to uniquely identify each IEC."
::= { cCallHistoryIecEntry 1 }
cCallHistoryIec OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the Internal Error Code.
The format is a string of dotted decimal numbers
composed of the following components:
Version.Entity.Category.Subsystem.Errorcode.Diagnostic
Each component is defined as follows:
Version : The version of IEC software.
Entity : The network entity that originated
the error.
Category : The category of the error (eg, software
error, hardware resource unavailable, ...)
Subsystem : The subsystem in which the error occurred.
Errorcode : A subsytem-specific error code.
Diagnostic : An implementation-specific diagnostic code."
::= { cCallHistoryIecEntry 2 }
--
-- Peer Global Configuration Group
--
cPeerGlobalConfiguration
OBJECT IDENTIFIER ::= { ciscoDialControlMibObjects 5 }
cPeerSearchType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
datavoice (2),
voicedata (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the peer search preference based on the
type of peers in an universal/integrated port
platform.
none - both voice and data peers are searched
in same preference.
datavoice - search data peers first. If no data peers
are found, the voice peers are searched.
voicedata - search voice peers first. If no voice peers
are found, the data peers are searched."
DEFVAL { datavoice }
::= { cPeerGlobalConfiguration 1 }
-- conformance information
ciscoDialControlMibConformance OBJECT IDENTIFIER ::=
{ ciscoDialControlMib 3 }
ciscoDialControlMibCompliances OBJECT IDENTIFIER ::=
{ ciscoDialControlMibConformance 1 }
ciscoDialControlMibGroups OBJECT IDENTIFIER ::=
{ ciscoDialControlMibConformance 2 }
-- compliance statements
ciscoDialControlMibCompliance MODULE-COMPLIANCE
STATUS deprecated -- superceded by
-- ciscoDialControlMibComplianceRev1
DESCRIPTION
"The compliance statement for entities which
implement the DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS
{ cCallHistoryGroup }
::= { ciscoDialControlMibCompliances 1 }
ciscoDialControlMibComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated -- superceded by
-- ciscoDialControlMibComplianceRev2
DESCRIPTION
"The compliance statement for entities which
implement the DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS
{ cCallHistoryGroupRev1 }
::= { ciscoDialControlMibCompliances 2 }
ciscoDialControlMibComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated -- superceded by
-- ciscoDialControlMibComplianceRev3
DESCRIPTION
"The compliance statement for entities which
implement the DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS
{ cCallHistoryGroupRev2 }
::= { ciscoDialControlMibCompliances 3 }
ciscoDialControlMibComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated -- superceded by
-- ciscoDialControlMibComplianceRev4
DESCRIPTION
"The compliance statement for entities which
implement the DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS
{ cCallHistoryGroupRev2, cPeerGlobalConfigurationGroup }
::= { ciscoDialControlMibCompliances 4 }
ciscoDialControlMibComplianceRev4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS
{ cCallHistoryGroupRev2,
cPeerGlobalConfigurationGroup,
cCallHistoryIecGroup
}
::= { ciscoDialControlMibCompliances 5 }
-- units of conformance
cCallHistoryGroup OBJECT-GROUP
OBJECTS {
cCallHistorySetupTime,
cCallHistoryPeerAddress,
cCallHistoryPeerSubAddress,
cCallHistoryPeerId,
cCallHistoryPeerIfIndex,
cCallHistoryLogicalIfIndex,
cCallHistoryDisconnectCause,
cCallHistoryDisconnectText,
cCallHistoryConnectTime,
cCallHistoryDisconnectTime,
cCallHistoryCallOrigin,
cCallHistoryChargedUnits,
cCallHistoryInfoType,
cCallHistoryTransmitPackets,
cCallHistoryTransmitBytes,
cCallHistoryReceivePackets,
cCallHistoryReceiveBytes
}
STATUS deprecated -- superceded by cCallHistoryGroupRev1
DESCRIPTION
"A collection of objects providing the Call History
capability."
::= { ciscoDialControlMibGroups 1 }
cCallHistoryGroupRev1 OBJECT-GROUP
OBJECTS {
cCallHistorySetupTime,
cCallHistoryPeerAddress,
cCallHistoryPeerSubAddress,
cCallHistoryPeerId,
cCallHistoryPeerIfIndex,
cCallHistoryLogicalIfIndex,
cCallHistoryDisconnectCause,
cCallHistoryDisconnectText,
cCallHistoryConnectTime,
cCallHistoryDisconnectTime,
cCallHistoryCallOrigin,
cCallHistoryChargedUnits,
cCallHistoryInfoType,
cCallHistoryTransmitPackets,
cCallHistoryTransmitBytes,
cCallHistoryReceivePackets,
cCallHistoryReceiveBytes,
cCallHistoryReleaseSource
}
STATUS deprecated -- superceded by cCallHistoryGroupRev2
DESCRIPTION
"A collection of objects providing the Call History
capability."
::= { ciscoDialControlMibGroups 2 }
cCallHistoryGroupRev2 OBJECT-GROUP
OBJECTS {
cCallHistorySetupTime,
cCallHistoryPeerAddress,
cCallHistoryPeerSubAddress,
cCallHistoryPeerId,
cCallHistoryPeerIfIndex,
cCallHistoryLogicalIfIndex,
cCallHistoryDisconnectCause,
cCallHistoryDisconnectText,
cCallHistoryConnectTime,
cCallHistoryDisconnectTime,
cCallHistoryCallOrigin,
cCallHistoryChargedUnits,
cCallHistoryInfoType,
cCallHistoryTransmitPackets,
cCallHistoryTransmitBytes,
cCallHistoryReceivePackets,
cCallHistoryReceiveBytes,
cCallHistoryReleaseSrc
}
STATUS current
DESCRIPTION
"A collection of objects providing the Call History
capability."
::= { ciscoDialControlMibGroups 3 }
cPeerGlobalConfigurationGroup OBJECT-GROUP
OBJECTS {
cPeerSearchType
}
STATUS current
DESCRIPTION
"A collection of objects providing the Peer global
configuration."
::= { ciscoDialControlMibGroups 4 }
cCallHistoryIecGroup OBJECT-GROUP
OBJECTS {
cCallHistoryIec
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
Internal Error Code."
::= { ciscoDialControlMibGroups 5 }
END