1446 lines
49 KiB
Plaintext
1446 lines
49 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-ENTITY-EXT-MIB.my
|
|
--
|
|
-- Cisco Extension to ENTITY-MIB(RFC2737)
|
|
--
|
|
-- April 2001, A S Kiran Koushik
|
|
-- May 2004, Arul Mozhi
|
|
-- Mar 2015, Neha Jagtap
|
|
--
|
|
-- Copyright (c) 2001-2018 by cisco Systems Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
CISCO-ENTITY-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
entPhysicalIndex,
|
|
entPhysicalEntry,
|
|
entPhysicalDescr,
|
|
entPhysicalName,
|
|
entPhysicalContainedIn
|
|
FROM ENTITY-MIB
|
|
Unsigned64
|
|
FROM CISCO-TC
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoEntityExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201804040000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W. Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is an extension of the ENTITY-MIB
|
|
specified in RFC2737.
|
|
|
|
This MIB module contains Cisco-defined extensions
|
|
to the entityPhysicalTable to represent information
|
|
related to entities of class module(entPhysicalClass
|
|
= 'module') which have a Processor.
|
|
|
|
A processor module is defined as a physical entity
|
|
that has a CPU, RAM and NVRAM so that
|
|
it can independently
|
|
- load a bootable image
|
|
- save configuration.
|
|
This module is the entry point for external
|
|
applications like SNMP Manager, CLI, FTP etc.
|
|
|
|
Line card is an interface card with at least a
|
|
Processor and RAM. This might be referred to as
|
|
Service Module in some cisco products.
|
|
|
|
A configuration register is a 16 bit
|
|
software register.
|
|
The configuration register is mainly used to
|
|
check for instructions on where to find the Cisco
|
|
Operating System software.
|
|
Some other functions of configuration register are:
|
|
- To select a boot source and default boot filename.
|
|
- To enable or disable the Break function.
|
|
- To control broadcast addresses.
|
|
- To set the console terminal baud rate.
|
|
- To load operating software from Flash memory.
|
|
- To allow us to manually boot the system using the
|
|
boot command at the bootstrap program prompt.
|
|
|
|
Booting is the process of initializing the
|
|
hardware and starting the Operating System."
|
|
REVISION "201804040000Z"
|
|
DESCRIPTION
|
|
"Added the following groups OBJECT-GROUP
|
|
ceExtNVRAMOverflowGroup
|
|
ceExtHCNVRAMGroup"
|
|
REVISION "201504170000Z"
|
|
DESCRIPTION
|
|
"Added ceExtUSBModemTable,
|
|
ceExtUSBModemPlugInNotif, ceExtUSBModemPlugOutNotif,
|
|
ceExtEntUsbModemNotifEnable."
|
|
REVISION "201409120000Z"
|
|
DESCRIPTION
|
|
"Changed the description ceExtEntDoorOpenNotif to
|
|
include ceExtEntDoorOpenNotif instead
|
|
of ceExtEntDoorCloseNotif."
|
|
REVISION "201403270000Z"
|
|
DESCRIPTION
|
|
"Changed the Max Access of ceExtEntDoorNotifEnable from
|
|
read-only to read-write."
|
|
REVISION "201308060000Z"
|
|
DESCRIPTION
|
|
"Added following object to ciscoEntityExtMIBNotifications
|
|
ceExtBreakOutPortInserted
|
|
ceExtBreakOutPortRemoved
|
|
|
|
Added following object to ceExtNotificationControlObjects
|
|
ceExtBreakOutPortNotifEnable
|
|
|
|
Added the following new groups to ciscoEntityExtMIBGroups
|
|
ceExtBreakOutPortNotifGroup
|
|
ceExtBreakOutPortNotifControlGroup.
|
|
|
|
Added a new compliance ciscoEntityExtMIBComplianceRev5 which
|
|
deprecates ciscoEntityExtMIBComplianceRev4
|
|
|
|
A port can be configured to act as multiple interfaces.
|
|
Ex: One Hundred GigE port can act as 10 TenGigE interface
|
|
Breakout is the term that can be used to define this behaviour.
|
|
Alternatively slice term is also used.
|
|
|
|
When a breakout config is applied on the interface, the base
|
|
interface will be replaced with multiple breakout interfaces.
|
|
Reference to the base interface will be removed from the system
|
|
and breakout interface will be made available. Vice versa will
|
|
happen when breakout config will be removed from the system."
|
|
REVISION "201308050000Z"
|
|
DESCRIPTION
|
|
"Added following new objects to ciscoEntityExtMIBNotifications.
|
|
ceExtEntDoorCloseNotif
|
|
ceExtEntDoorOpenNotif
|
|
|
|
Added following new groups to ciscoEntityExtMIBGroups.
|
|
ceExtNotificationControlObjects.
|
|
|
|
Added following new objects to ceExtNotificationControlObjects
|
|
ceExtEntDoorNotifEnable.
|
|
|
|
Added the following new groups to ciscoEntityExtMIBGroups
|
|
ceExtEntDoorNotifGroup
|
|
ceExtEntDoorNotifControlGroup.
|
|
|
|
Added a new compliance ciscoEntityExtMIBComplianceRev4 which
|
|
deprecates ciscoEntityExtMIBComplianceRev3."
|
|
REVISION "200811240000Z"
|
|
DESCRIPTION
|
|
"Added following new objects to ceExtPhysicalProcessorTable.
|
|
ceExtProcessorRamOverflow and ceExtHCProcessorRam
|
|
|
|
Added following new groups to ciscoEntityExtMIBGroups.
|
|
ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup.
|
|
|
|
Added a new compliance ciscoEntityExtMIBComplianceRev3 which
|
|
deprecates ciscoEntityExtMIBComplianceRev2."
|
|
REVISION "200407060000Z"
|
|
DESCRIPTION
|
|
"Added a new table object 'ceExtEntPhysicalTable' ."
|
|
REVISION "200403030000Z"
|
|
DESCRIPTION
|
|
"Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC."
|
|
REVISION "200401260000Z"
|
|
DESCRIPTION
|
|
"Added new enum to ceExtEntityLEDType."
|
|
REVISION "200308240000Z"
|
|
DESCRIPTION
|
|
"Added ceExtEntityLEDTable. Added ceExtKickstartImageList to
|
|
ceExtConfigRegTable.
|
|
Added new group ciscoEntityExtLEDGroup.
|
|
Added group ceExtSysBootImageListGroupRev1."
|
|
REVISION "200105170000Z"
|
|
DESCRIPTION
|
|
"Corrected the description for the TC
|
|
ConfigRegisterValue."
|
|
REVISION "200104050000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 195 }
|
|
|
|
|
|
ciscoEntityExtMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoEntityExtMIB 1 }
|
|
|
|
|
|
-- textual conventions
|
|
|
|
ConfigRegisterValue ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2x"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Integer containing the value of config register.
|
|
|
|
The definition of individual bits from right to left
|
|
when set are as follows:
|
|
|
|
00 to
|
|
03 Boot Fields(Refer below for
|
|
explanation).
|
|
|
|
04 to
|
|
05 Not Used.
|
|
|
|
06 Causes system software to ignore the
|
|
contents of NVRAM.
|
|
|
|
07 Enable the original equipment
|
|
manufacturer (OEM) bit.
|
|
|
|
08 The Break function is disabled.
|
|
|
|
09 Not used.
|
|
|
|
10 Broadcast based on 0.0.0.0 IP address.
|
|
|
|
11 to
|
|
12 Defines the console baud rate as below:
|
|
Bits 11 & 12 unset: 9600 baud(default),
|
|
Bit 11 set & 12 unset: 4800 baud,
|
|
Bit 11 unset & 12 set: 1200 baud,
|
|
Bit 11 set & 12 set: 2400 baud
|
|
|
|
13 Boots default Flash software if
|
|
network boot fails.
|
|
|
|
14 IP broadcasts do not have network
|
|
numbers.
|
|
|
|
15 Enables diagnostic messages and ignores
|
|
the contents of NVRAM.
|
|
|
|
|
|
Meanings for different values of Boot Fields
|
|
(Bits 00 to 03) are explained below:
|
|
|
|
Value(in hex) Description
|
|
------------ -----------
|
|
00 On powerup or reload, the system
|
|
remains at the ROM monitor prompt
|
|
(rommon>), awaiting a user command
|
|
to boot the system manually by means
|
|
of the rommon boot command.
|
|
|
|
01 On powerup or reload, the system loads
|
|
the system image found in onboard
|
|
Flash memory.
|
|
|
|
02 to On powerup or reload, the system loads
|
|
0F the system image specified by
|
|
ceExtSysBootImageList.
|
|
It tries to boot the
|
|
image in the order in which
|
|
the image names are entered in
|
|
ceExtSysBootImageList. If
|
|
it cannot boot any image in the
|
|
ceExtSysBootImageList, it
|
|
stays in ROM monitor mode."
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
|
|
BootImageList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This contains a list of boot images,
|
|
each separated by the ';' (semi-colon) character.
|
|
The following provides a syntax for parsing a single
|
|
boot image list item.
|
|
|
|
<device>:[filename] | <URL>
|
|
|
|
<device> can be (but not limited to):
|
|
flash, bootflash, slot0, rom, C
|
|
The transfer protocol used in the <URL>
|
|
can be (but not limited to):
|
|
tftp, ftp, rcp, mop.
|
|
|
|
The following is en example containing two boot image
|
|
names:
|
|
disk0:c7100-ik2s-mz;tftp://dirt/c7100-ik2s-mz
|
|
|
|
If the filename is not specified, then the
|
|
first file on the <device> will be used.
|
|
|
|
If the last two characters in the returned value
|
|
are ';+' this indicates that additional boot image
|
|
items are configured on the device but can not
|
|
be returned because the maximum string size limitation
|
|
would be exceeded.
|
|
|
|
For example:
|
|
disk0:image1;disk0:image2;+"
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
-- ceExtPhysicalProcessorTable
|
|
|
|
ceExtPhysicalProcessorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeExtPhysicalProcessorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ceExtPhysicalProcessorTable extends
|
|
the ENTITY-MIB entPhysicalTable for modules
|
|
(Non FRUs(Field Replacable Units) or FRUs)."
|
|
REFERENCE "RFC2737: Section 2.12.1"
|
|
::= { ciscoEntityExtMIBObjects 1 }
|
|
|
|
ceExtPhysicalProcessorEntry OBJECT-TYPE
|
|
SYNTAX CeExtPhysicalProcessorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceExtPhysicalProcessorTable entry extends
|
|
a corresponding entPhysicalTable entry of class
|
|
module(entPhysicalClass = 'module').
|
|
|
|
A processor module or line card which
|
|
has a processor will have an entry in
|
|
this table.
|
|
|
|
A processor module or line card having
|
|
multiple processors and is a SMP(Symmetric
|
|
multi processor) system will have only
|
|
one entry corresponding to all the processors
|
|
since the resources defined below are shared.
|
|
|
|
A processor module or line card having
|
|
multiple processors and is not an SMP system
|
|
would register the processors as separate entities.
|
|
|
|
Entries are created by the agent at the system power-up
|
|
or module insertion.
|
|
|
|
Entries are removed when the module is reset or removed."
|
|
INDEX { entPhysicalIndex }
|
|
::= { ceExtPhysicalProcessorTable 1 }
|
|
|
|
CeExtPhysicalProcessorEntry ::= SEQUENCE {
|
|
ceExtProcessorRam Unsigned32,
|
|
ceExtNVRAMSize Unsigned32,
|
|
ceExtNVRAMUsed Unsigned32,
|
|
ceExtProcessorRamOverflow Unsigned32,
|
|
ceExtHCProcessorRam Unsigned64,
|
|
ceExtNVRAMSizeOverflow Unsigned32,
|
|
ceExtHCNVRAMSize Unsigned64,
|
|
ceExtNVRAMUsedOverflow Unsigned32,
|
|
ceExtHCNVRAMUsed Unsigned64
|
|
}
|
|
|
|
ceExtProcessorRam OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of bytes of RAM available on the
|
|
Processor."
|
|
::= { ceExtPhysicalProcessorEntry 1 }
|
|
|
|
ceExtNVRAMSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of bytes of NVRAM in the entity.
|
|
|
|
A value of 0 for this object means the entity
|
|
does not support NVRAM or NVRAM information
|
|
is not available."
|
|
::= { ceExtPhysicalProcessorEntry 2 }
|
|
|
|
ceExtNVRAMUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bytes of NVRAM in use. This object
|
|
is irrelevant if ceExtNVRAMSize is 0."
|
|
::= { ceExtPhysicalProcessorEntry 3 }
|
|
|
|
ceExtProcessorRamOverflow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the upper 32-bit of ceExtProcessorRam.
|
|
This object needs to be supported only if the available RAM
|
|
bytes exceeds 32-bit, otherwise this object value would be set
|
|
to 0."
|
|
::= { ceExtPhysicalProcessorEntry 4 }
|
|
|
|
ceExtHCProcessorRam OBJECT-TYPE
|
|
SYNTAX Unsigned64
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of bytes of RAM
|
|
available on the Processor. This object is a 64-bit version
|
|
of ceExtProcessorRam."
|
|
::= { ceExtPhysicalProcessorEntry 5 }
|
|
|
|
ceExtNVRAMSizeOverflow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the upper 32-bit of ceExtNVRAMSize.
|
|
This object needs to be supported only if the available NVRAM
|
|
bytes exceeds 32-bit, otherwise this object value would be set
|
|
to 0."
|
|
::= { ceExtPhysicalProcessorEntry 6 }
|
|
|
|
ceExtHCNVRAMSize OBJECT-TYPE
|
|
SYNTAX Unsigned64
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of bytes of NVRAM
|
|
available on the Processor. This object is a 64-bit version
|
|
of ceExtNVRAMSize."
|
|
::= { ceExtPhysicalProcessorEntry 7 }
|
|
|
|
ceExtNVRAMUsedOverflow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the upper 32-bit of ceExtNVRAMUsed.
|
|
This object needs to be supported only if the used NVRAM
|
|
bytes exceeds 32-bit, otherwise this object value would be set
|
|
to 0."
|
|
::= { ceExtPhysicalProcessorEntry 8 }
|
|
|
|
ceExtHCNVRAMUsed OBJECT-TYPE
|
|
SYNTAX Unsigned64
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of bytes of NVRAM used
|
|
on the Processor. This object is a 64-bit version of
|
|
ceExtHCNVRAMUsed."
|
|
::= { ceExtPhysicalProcessorEntry 9 }
|
|
|
|
ceExtConfigRegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeExtConfigRegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ceExtConfigRegTable extends
|
|
the ENTITY-MIB entPhysicalTable."
|
|
REFERENCE "RFC2737: Section 2.12.1"
|
|
::= { ciscoEntityExtMIBObjects 2 }
|
|
|
|
ceExtConfigRegEntry OBJECT-TYPE
|
|
SYNTAX CeExtConfigRegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceExtConfigRegTable entry extends
|
|
a corresponding entPhysicalTable entry of class
|
|
module which has a configuration register.
|
|
|
|
Entries are created by the agent at the system power-up
|
|
or module insertion.
|
|
|
|
Entries are removed when the module is reset or
|
|
removed."
|
|
INDEX { entPhysicalIndex }
|
|
::= { ceExtConfigRegTable 1 }
|
|
|
|
CeExtConfigRegEntry ::= SEQUENCE {
|
|
ceExtConfigRegister ConfigRegisterValue,
|
|
ceExtConfigRegNext ConfigRegisterValue,
|
|
ceExtSysBootImageList BootImageList,
|
|
ceExtKickstartImageList BootImageList
|
|
}
|
|
|
|
ceExtConfigRegister OBJECT-TYPE
|
|
SYNTAX ConfigRegisterValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of configuration register with which
|
|
the processor module booted."
|
|
::= { ceExtConfigRegEntry 1 }
|
|
|
|
ceExtConfigRegNext OBJECT-TYPE
|
|
SYNTAX ConfigRegisterValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of configuration register in the
|
|
processor module at next reboot. Just after
|
|
the reboot this has the same value as
|
|
ceExtConfigRegister."
|
|
::= { ceExtConfigRegEntry 2 }
|
|
|
|
ceExtSysBootImageList OBJECT-TYPE
|
|
SYNTAX BootImageList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of system boot images which
|
|
can be used for booting."
|
|
DEFVAL { "" }
|
|
::= { ceExtConfigRegEntry 3 }
|
|
|
|
ceExtKickstartImageList OBJECT-TYPE
|
|
SYNTAX BootImageList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of system kickstart images which
|
|
can be used for booting."
|
|
DEFVAL { "" }
|
|
::= { ceExtConfigRegEntry 4 }
|
|
|
|
|
|
-- ceExtEntityLEDTable
|
|
|
|
ceExtEntityLEDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeExtEntityLEDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information of LED on an entity."
|
|
::= { ciscoEntityExtMIBObjects 3 }
|
|
|
|
ceExtEntityLEDEntry OBJECT-TYPE
|
|
SYNTAX CeExtEntityLEDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the ceExtEntityLEDTable,
|
|
containing information about an LED on an entity, identified by
|
|
entPhysicalIndex."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceExtEntityLEDType
|
|
}
|
|
::= { ceExtEntityLEDTable 1 }
|
|
|
|
CeExtEntityLEDEntry ::= SEQUENCE {
|
|
ceExtEntityLEDType INTEGER,
|
|
ceExtEntityLEDColor INTEGER
|
|
}
|
|
|
|
ceExtEntityLEDType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
status(1),
|
|
system(2),
|
|
active(3),
|
|
power(4),
|
|
battery(5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of LED on this entity.
|
|
'status' - indicates the entity status.
|
|
'system' - indicates the overall system status.
|
|
'active' - the redundancy status of a module, for e.g.
|
|
supervisor module.
|
|
'power' - indicates sufficient power availability for all
|
|
modules.
|
|
'battery'- indicates the battery status."
|
|
REFERENCE
|
|
"Cisco MDS 9500 Series Hardware Installation Guide,
|
|
Product Overview."
|
|
::= { ceExtEntityLEDEntry 1 }
|
|
|
|
ceExtEntityLEDColor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
green(2),
|
|
amber(3),
|
|
red(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The color of the LED."
|
|
REFERENCE
|
|
"Cisco MDS 9500 Series Multilayer Switches, Product
|
|
Overview."
|
|
::= { ceExtEntityLEDEntry 2 }
|
|
|
|
|
|
-- ceExtEntityPhysicalTable
|
|
|
|
ceExtEntPhysicalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeExtEntPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains additional information about
|
|
a particular physical entity.
|
|
This table augments the 'entPhysicalTable' of
|
|
the ENTITY-MIB."
|
|
REFERENCE "RFC2737: Section 2.12.1"
|
|
::= { ciscoEntityExtMIBObjects 4 }
|
|
|
|
ceExtEntPhysicalEntry OBJECT-TYPE
|
|
SYNTAX CeExtEntPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the 'ceExtEntPhysicalTable',
|
|
containing additional information about a physical entity,
|
|
identified by 'entPhysicalIndex'."
|
|
AUGMENTS { entPhysicalEntry }
|
|
::= { ceExtEntPhysicalTable 1 }
|
|
|
|
CeExtEntPhysicalEntry ::= SEQUENCE {
|
|
ceEntPhysicalSecondSerialNum SnmpAdminString
|
|
}
|
|
|
|
ceEntPhysicalSecondSerialNum OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the vendor-specific second
|
|
serial number string for the physical entity.
|
|
The first serial number string of the physical
|
|
entity is represented in the value of corresponding
|
|
instance of the 'entPhysicalSerialNum' object.
|
|
|
|
On the first instantiation of an physical entity, the value
|
|
of this object is the correct vendor-assigned second
|
|
serial number, if this information is available to the agent.
|
|
|
|
If the second serial number is unknown or non-existent, then
|
|
the value of this object will be a zero-length string instead.
|
|
|
|
Note that implementations which can correctly identify the
|
|
second serial numbers of all installed physical entities do
|
|
not need to provide write access to this object.
|
|
Agents which cannot provide non-volatile storage for the
|
|
second serial number strings are not required to implement
|
|
write access for this object.
|
|
|
|
Not every physical component will have a serial number, or
|
|
even need one. Physical entities for which the associated
|
|
value of the entPhysicalIsFRU object is equal to 'false(2)'
|
|
(e.g., the repeater ports within a repeater module), do not
|
|
need their own unique serial number. An agent does not have
|
|
to provide write access for such entities, and may return a
|
|
zero-length string.
|
|
|
|
If write access is implemented for an instance of
|
|
'ceEntPhysicalSecondSerialNum', and a value is written into
|
|
the instance, the agent must retain the supplied value in the
|
|
'ceEntPhysicalSecondSerialNum' instance associated with the
|
|
same physical entity for as long as that entity remains
|
|
instantiated. This includes instantiations across all re-
|
|
initializations/reboots of the network management system,
|
|
including those which result in a change of the physical
|
|
entity's entPhysicalIndex value."
|
|
DEFVAL { "" }
|
|
::= { ceExtEntPhysicalEntry 1 }
|
|
|
|
|
|
ceExtNotificationControlObjects OBJECT IDENTIFIER
|
|
::= { ciscoEntityExtMIBObjects 5 }
|
|
|
|
|
|
ceExtEntDoorNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the generation of
|
|
ceExtEntDoorCloseNotif and ceExtEntDoorOpenNotif
|
|
notifications as follows:
|
|
'true(1)' - the generation of ceExtEntDoorCloseNotif
|
|
and ceExtEntDoorOpenNotif
|
|
notifications are enabled.
|
|
'false(2)' - the generation of ceExtEntDoorCloseNotif
|
|
and ceExtEntDoorOpenNotif
|
|
notifications are disabled."
|
|
DEFVAL { false }
|
|
::= { ceExtNotificationControlObjects 1 }
|
|
|
|
ceExtEntBreakOutPortNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the generation of
|
|
ceExtBreakOutPortInserted and
|
|
ceExtBreakOutPortRemoved as follows:
|
|
'true(1)' - the generation of ceExtBreakOutPortInserted
|
|
and ceExtBreakOutPortRemoved
|
|
notifications is enabled.
|
|
'false(2)' - the generation of ceExtBreakOutPortInserted
|
|
and ceExtBreakOutPortRemoved
|
|
notifications is disabled."
|
|
DEFVAL { false }
|
|
::= { ceExtNotificationControlObjects 2 }
|
|
|
|
ceExtEntUsbModemNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the generation of
|
|
ceExtUSBModemPlugInNotif and
|
|
ceExtUSBModemPlugOutNotif as follows:
|
|
'true(1)' - the generation of ceExtUSBModemPlugInNotif
|
|
and ceExtUSBModemPlugOutNotif
|
|
notifications is enabled.
|
|
'false(2)' - the generation of ceExtUSBModemPlugOutNotif
|
|
and ceExtUSBModemPlugOutNotif
|
|
notifications is disabled."
|
|
DEFVAL { false }
|
|
::= { ceExtNotificationControlObjects 3 }
|
|
-- ceExtUSBModemTable
|
|
|
|
ceExtUSBModemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeExtUSBModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information of USB MODEMs on an entity."
|
|
::= { ciscoEntityExtMIBObjects 6 }
|
|
|
|
ceExtUSBModemEntry OBJECT-TYPE
|
|
SYNTAX CeExtUSBModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the ceExtUSBModemTable,
|
|
containing information about an USB MODEM on an entity,
|
|
identified by entPhysicalIndex."
|
|
INDEX { entPhysicalIndex }
|
|
::= { ceExtUSBModemTable 1 }
|
|
|
|
CeExtUSBModemEntry ::= SEQUENCE {
|
|
ceExtUSBModemIMEI SnmpAdminString,
|
|
ceExtUSBModemIMSI SnmpAdminString,
|
|
ceExtUSBModemServiceProvider SnmpAdminString,
|
|
ceExtUSBModemSignalStrength SnmpAdminString
|
|
}
|
|
|
|
ceExtUSBModemIMEI OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The International Mobile Equipment Identifier (IMEI) of the
|
|
USB-MODEM"
|
|
REFERENCE "RFC 6155"
|
|
::= { ceExtUSBModemEntry 1 }
|
|
|
|
ceExtUSBModemIMSI OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The International Mobile Subscriber Identifier(IMSI) -
|
|
for a GSM USB MODEM."
|
|
REFERENCE "RFC 4186"
|
|
::= { ceExtUSBModemEntry 2 }
|
|
|
|
ceExtUSBModemServiceProvider OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service Provider name for a USB MODEM."
|
|
::= { ceExtUSBModemEntry 3 }
|
|
|
|
ceExtUSBModemSignalStrength OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The signal strength of the USB MODEM."
|
|
::= { ceExtUSBModemEntry 4 }
|
|
|
|
|
|
-- Notifications
|
|
|
|
ceExtMIBNotificationPrefix OBJECT IDENTIFIER
|
|
::= { ciscoEntityExtMIB 2 }
|
|
|
|
ciscoEntityExtMIBNotifications OBJECT IDENTIFIER
|
|
::= { ceExtMIBNotificationPrefix 0 }
|
|
|
|
|
|
ceExtEntDoorCloseNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalDescr,
|
|
entPhysicalName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceExtEntDoorCloseNotif is generated if the door of an entity
|
|
has been closed."
|
|
::= { ciscoEntityExtMIBNotifications 1 }
|
|
|
|
ceExtEntDoorOpenNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalDescr,
|
|
entPhysicalName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceExtEntDoorOpenNotif is generated if the door of an entity
|
|
has been opened."
|
|
::= { ciscoEntityExtMIBNotifications 2 }
|
|
|
|
ceExtBreakOutPortInserted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalContainedIn,
|
|
entPhysicalName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ceExtBreakOutPortInserted notification indicates
|
|
that a Breakout port was inserted. The varbind for
|
|
this notification indicates the entPhysicalIndex of
|
|
the inserted Breakout port, and the entPhysicalIndex
|
|
of the BreakOut Port module that contains this port."
|
|
::= { ciscoEntityExtMIBNotifications 3 }
|
|
|
|
ceExtBreakOutPortRemoved NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalContainedIn,
|
|
entPhysicalName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ceExtBreakOutPortRemoved notification indicates
|
|
that a Breakout Port was removed. The varbind for this
|
|
notification indicates the entPhysicalIndex of the
|
|
removed Breakout port, and the entPhysicalIndex
|
|
of the BreakOut Port module that contains this port."
|
|
::= { ciscoEntityExtMIBNotifications 4 }
|
|
|
|
ceExtUSBModemPlugInNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalContainedIn,
|
|
entPhysicalDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ceExtUSBModemPlugInNotif notification indicates that
|
|
a USB MODEM was inserted. The varbind for this notification
|
|
indicates the entPhysicalDescr of the inserted USB MODEM,
|
|
and the entPhysicalIndex of the USB MODEM's container."
|
|
::= { ciscoEntityExtMIBNotifications 5 }
|
|
|
|
ceExtUSBModemPlugOutNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalContainedIn,
|
|
entPhysicalDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ceExtUSBModemPlugOutNotif notification indicates that
|
|
a USB MODEM was removed. The varbind for this notification
|
|
indicates the entPhysicalDescr of the removed USB MODEM,
|
|
and the entPhysicalIndex of the USB MODEM's container."
|
|
::= { ciscoEntityExtMIBNotifications 6 }
|
|
-- conformance information
|
|
|
|
ciscoEntityExtMIBConformance OBJECT IDENTIFIER
|
|
::= { ciscoEntityExtMIB 3 }
|
|
|
|
ciscoEntityExtMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoEntityExtMIBConformance 1 }
|
|
|
|
ciscoEntityExtMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoEntityExtMIBConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
ciscoEntityExtMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an optional group
|
|
containing objects providing information about
|
|
configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
::= { ciscoEntityExtMIBCompliances 1 }
|
|
|
|
ciscoEntityExtMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an optional group
|
|
containing objects providing information about
|
|
configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
|
|
GROUP ciscoEntityExtLEDGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides LED information."
|
|
|
|
GROUP ceExtSysBootImageListGroupRev1
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
::= { ciscoEntityExtMIBCompliances 2 }
|
|
|
|
ciscoEntityExtMIBComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an optional group
|
|
containing objects providing information about
|
|
configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
|
|
GROUP ciscoEntityExtLEDGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides LED information."
|
|
|
|
GROUP ceExtSysBootImageListGroupRev1
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
|
|
GROUP ciscoExtEntityPhysicalGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides additional information about the
|
|
physical entity."
|
|
::= { ciscoEntityExtMIBCompliances 3 }
|
|
|
|
ciscoEntityExtMIBComplianceRev3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an optional group
|
|
containing objects providing information about
|
|
configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
|
|
GROUP ciscoEntityExtLEDGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides LED information."
|
|
|
|
GROUP ceExtSysBootImageListGroupRev1
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides information about the system boot images."
|
|
|
|
GROUP ciscoExtEntityPhysicalGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object
|
|
which provides additional information about the
|
|
physical entity."
|
|
|
|
GROUP ceExtPhyProcessorOverflowGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtPhyProcessorHCGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
::= { ciscoEntityExtMIBCompliances 4 }
|
|
|
|
ciscoEntityExtMIBComplianceRev4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an
|
|
optional group containing objects providing
|
|
information about configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides information about the system boot images."
|
|
|
|
GROUP ciscoEntityExtLEDGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides LED information."
|
|
|
|
GROUP ceExtSysBootImageListGroupRev1
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides information about the system boot images."
|
|
|
|
GROUP ciscoExtEntityPhysicalGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides additional information about the physical entity."
|
|
|
|
GROUP ceExtPhyProcessorOverflowGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtPhyProcessorHCGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtEntDoorNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support entity door
|
|
open/close notifications."
|
|
|
|
GROUP ceExtEntDoorNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support entity door
|
|
open/close notifications."
|
|
|
|
OBJECT ceExtConfigRegNext
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceExtSysBootImageList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceExtKickstartImageList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceEntPhysicalSecondSerialNum
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceExtEntDoorNotifEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoEntityExtMIBCompliances 5 }
|
|
|
|
ciscoEntityExtMIBComplianceRev5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an
|
|
optional group containing objects providing
|
|
information about configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides information about the system boot images."
|
|
|
|
GROUP ciscoEntityExtLEDGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides LED information."
|
|
|
|
GROUP ceExtSysBootImageListGroupRev1
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides information about the system boot images."
|
|
|
|
GROUP ciscoExtEntityPhysicalGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides additional information about the physical entity."
|
|
|
|
GROUP ceExtPhyProcessorOverflowGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtPhyProcessorHCGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtEntDoorNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support entity door
|
|
open/close notifications."
|
|
|
|
GROUP ceExtEntDoorNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support entity door
|
|
open/close notifications."
|
|
|
|
GROUP ceExtBreakOutPortNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support Breakout
|
|
port notifications."
|
|
|
|
GROUP ceExtBreakOutPortNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support Breakout
|
|
port notifications."
|
|
|
|
OBJECT ceExtEntBreakOutPortNotifEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoEntityExtMIBCompliances 6 }
|
|
|
|
ciscoEntityExtMIBComplianceRev6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance for SNMP Entities which support modules
|
|
with CPU, NVRAM and configuration register."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
|
|
|
|
GROUP ciscoEntityExtConfigRegGroup
|
|
DESCRIPTION
|
|
"The ciscoEntityExtConfigRegGroup is an
|
|
optional group containing objects providing
|
|
information about configuration register."
|
|
|
|
GROUP ceExtSysBootImageListGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides information about the system boot images."
|
|
|
|
GROUP ciscoEntityExtLEDGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides LED information."
|
|
|
|
GROUP ceExtSysBootImageListGroupRev1
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides information about the system boot images."
|
|
|
|
GROUP ciscoExtEntityPhysicalGroup
|
|
DESCRIPTION
|
|
"This group is an optional group containing an object which
|
|
provides additional information about the physical entity."
|
|
|
|
GROUP ceExtPhyProcessorOverflowGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtPhyProcessorHCGroup
|
|
DESCRIPTION
|
|
"This group is an optional group for the physical entities which
|
|
support 32-bit operating system."
|
|
|
|
GROUP ceExtEntDoorNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support entity door
|
|
open/close notifications."
|
|
|
|
GROUP ceExtEntDoorNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support entity door
|
|
open/close notifications."
|
|
|
|
GROUP ceExtBreakOutPortNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support Breakout
|
|
port notifications."
|
|
|
|
GROUP ceExtBreakOutPortNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support Breakout
|
|
port notifications."
|
|
|
|
GROUP ceExtUSBModemGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support
|
|
USB Modem management."
|
|
|
|
GROUP ceExtUsbModemNotificationsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support
|
|
USB Modem management."
|
|
|
|
GROUP ceExtUsbModemNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for platforms which support
|
|
USB Modem management."
|
|
|
|
OBJECT ceExtEntBreakOutPortNotifEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceExtEntUsbModemNotifEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoEntityExtMIBCompliances 7 }
|
|
|
|
-- units of conformance
|
|
|
|
ceExtPhysicalProcessorGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceExtProcessorRam,
|
|
ceExtNVRAMSize,
|
|
ceExtNVRAMUsed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which give information about
|
|
the Processor RAM and NVRAM."
|
|
::= { ciscoEntityExtMIBGroups 1 }
|
|
|
|
ciscoEntityExtConfigRegGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceExtConfigRegister,
|
|
ceExtConfigRegNext
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which give information about
|
|
configuration register.
|
|
|
|
Implementation of this group is optional."
|
|
::= { ciscoEntityExtMIBGroups 2 }
|
|
|
|
ceExtSysBootImageListGroup OBJECT-GROUP
|
|
OBJECTS { ceExtSysBootImageList }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group containing an object providing information
|
|
about the system boot images.
|
|
|
|
Implementation of this group is optional."
|
|
::= { ciscoEntityExtMIBGroups 3 }
|
|
|
|
ciscoEntityExtLEDGroup OBJECT-GROUP
|
|
OBJECTS { ceExtEntityLEDColor }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for giving led information."
|
|
::= { ciscoEntityExtMIBGroups 4 }
|
|
|
|
ceExtSysBootImageListGroupRev1 OBJECT-GROUP
|
|
OBJECTS { ceExtKickstartImageList }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group containing an object providing information
|
|
about the system boot images.
|
|
|
|
Implementation of this group is optional."
|
|
::= { ciscoEntityExtMIBGroups 5 }
|
|
|
|
ciscoExtEntityPhysicalGroup OBJECT-GROUP
|
|
OBJECTS { ceEntPhysicalSecondSerialNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects for providing additional
|
|
information about the physical entity.
|
|
|
|
Implementation of this group is optional."
|
|
::= { ciscoEntityExtMIBGroups 6 }
|
|
|
|
ceExtPhyProcessorOverflowGroup OBJECT-GROUP
|
|
OBJECTS { ceExtProcessorRamOverflow }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of Overflow (upper 32-bit) objects which
|
|
provides information about physical processor, when the entity
|
|
runs on 64-bit Operating System (OS). This group is optional for
|
|
the entities which run on 32-bit OS."
|
|
::= { ciscoEntityExtMIBGroups 7 }
|
|
|
|
ceExtPhyProcessorHCGroup OBJECT-GROUP
|
|
OBJECTS { ceExtHCProcessorRam }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of High Capacity (HC) objects which provides
|
|
information about physical processor, when the entity runs on
|
|
64-bit Operating System (OS). This group is optional for the
|
|
entities which run on 32-bit OS."
|
|
::= { ciscoEntityExtMIBGroups 8 }
|
|
|
|
ceExtEntDoorNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ceExtEntDoorCloseNotif,
|
|
ceExtEntDoorOpenNotif
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the notification
|
|
information for door entitites."
|
|
::= { ciscoEntityExtMIBGroups 9 }
|
|
|
|
ceExtEntDoorNotifControlGroup OBJECT-GROUP
|
|
OBJECTS { ceExtEntDoorNotifEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing control for entity door
|
|
notifications."
|
|
::= { ciscoEntityExtMIBGroups 10 }
|
|
|
|
ceExtBreakOutPortNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ceExtBreakOutPortInserted,
|
|
ceExtBreakOutPortRemoved
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the notification
|
|
information for supporting Breakout port feature."
|
|
::= { ciscoEntityExtMIBGroups 11 }
|
|
|
|
ceExtBreakOutPortNotifControlGroup OBJECT-GROUP
|
|
OBJECTS { ceExtEntBreakOutPortNotifEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing control for Breakout
|
|
Port notifications."
|
|
::= { ciscoEntityExtMIBGroups 12 }
|
|
|
|
ceExtUSBModemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceExtUSBModemIMEI,
|
|
ceExtUSBModemIMSI,
|
|
ceExtUSBModemServiceProvider,
|
|
ceExtUSBModemSignalStrength
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for giving USB MODEM
|
|
config information."
|
|
::= { ciscoEntityExtMIBGroups 13 }
|
|
|
|
ceExtUsbModemNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ceExtUSBModemPlugInNotif,
|
|
ceExtUSBModemPlugOutNotif
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notifications for USB MODEM removal and
|
|
insertion."
|
|
::= { ciscoEntityExtMIBGroups 14 }
|
|
|
|
ceExtUsbModemNotifControlGroup OBJECT-GROUP
|
|
OBJECTS { ceExtEntUsbModemNotifEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing control for USB
|
|
MODEM notifications."
|
|
::= { ciscoEntityExtMIBGroups 15 }
|
|
|
|
ceExtNVRAMOverflowGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceExtNVRAMSizeOverflow,
|
|
ceExtNVRAMUsedOverflow
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects providing Overflow (upper 32-bit) objects
|
|
for processor NVRAM information."
|
|
::= { ciscoEntityExtMIBGroups 16 }
|
|
|
|
ceExtHCNVRAMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceExtHCNVRAMSize,
|
|
ceExtHCNVRAMUsed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects providing High Capacity (HC) objects
|
|
for processor NVRAM information."
|
|
::= { ciscoEntityExtMIBGroups 17 }
|
|
|
|
END
|