1107 lines
36 KiB
Plaintext
1107 lines
36 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-LAG-MIB.my: Cisco LAG MIB
|
|
--
|
|
-- October 2001, Liwei Lue
|
|
--
|
|
-- Copyright (c) 2001-2003, 2004, 2006, 2008-2010, 2014 by cisco
|
|
-- Systems Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
CISCO-LAG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
dot3adAggPortEntry,
|
|
dot3adAggPortListEntry
|
|
FROM IEEE8023-LAG-MIB
|
|
CiscoInterfaceIndexList
|
|
FROM CISCO-TC
|
|
ifIndex
|
|
FROM IF-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoLagMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201401140000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-etherchan@cisco.com
|
|
cs-lan-switch-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"Cisco Link Aggregation module for managing IEEE Std
|
|
802.3ad.
|
|
|
|
This MIB provides Link Aggregation information that are
|
|
either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB)
|
|
or specific to Cisco products."
|
|
REVISION "201401140000Z"
|
|
DESCRIPTION
|
|
"Added clagAggPortListInterfaceIndexGroup."
|
|
REVISION "201010200000Z"
|
|
DESCRIPTION
|
|
"Added new enum values vlanIp(5) and ipPort(6) to
|
|
ClagDistributionProtocol textual convention."
|
|
REVISION "200911190000Z"
|
|
DESCRIPTION
|
|
"Added clagAggRateGroup, clagAggChannelIfLacpGroup,
|
|
clagAggChannelIfHashDistMethodGroup, clagAggChannelIfMinLinkGroup
|
|
and clagAggHashDistGlobalGroup."
|
|
REVISION "200801080000Z"
|
|
DESCRIPTION
|
|
"Modified the description of clagAggPortListPorts."
|
|
REVISION "200606210000Z"
|
|
DESCRIPTION
|
|
"Added clagAggMaxAggregatorsGroup and modified the
|
|
description of clagAggPortListPorts."
|
|
REVISION "200406110000Z"
|
|
DESCRIPTION
|
|
"Added clagAggPortListTable."
|
|
REVISION "200212130000Z"
|
|
DESCRIPTION
|
|
"Added a new value vlanIpPort(4) in TEXTUAL-CONVENTION
|
|
ClagDistributionProtocol.
|
|
Added a new object clagAggDistributionMplsProtocol."
|
|
REVISION "200201020000Z"
|
|
DESCRIPTION
|
|
"Modified Description of clagAggDistributionProtocol."
|
|
REVISION "200110230000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module.
|
|
Support Distribution configuration for LACP, Aggregation
|
|
protocol control, and Administrative status for LACP."
|
|
::= { ciscoMgmt 225 }
|
|
|
|
|
|
clagMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoLagMIB 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
ClagDistributionProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated type for all the supported load balancing
|
|
algorithms used on the port channel interface to distribute
|
|
outgoing data frames among its component interaces, such
|
|
as IP address.
|
|
|
|
ip(1) IP address
|
|
mac(2) MAC address
|
|
port(3) port number
|
|
vlanIpPort(4) vlan number, IP address and
|
|
port number
|
|
vlanIp(5) VLAN number and IP address
|
|
ipPort(6) IP address and port number"
|
|
SYNTAX INTEGER {
|
|
ip(1),
|
|
mac(2),
|
|
port(3),
|
|
vlanIpPort(4),
|
|
vlanIp(5),
|
|
ipPort(6)
|
|
}
|
|
|
|
ClagDistributionAddressMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated type for all the supported load
|
|
balancing address modes to distribute traffic
|
|
across multiple links. The address mode can be
|
|
source, destination, or both used on this port
|
|
channel interface to distribute outgoing data frames
|
|
among its component interfaces.
|
|
|
|
source(1) Source address.
|
|
destination(2) Destination address.
|
|
both(3) both, Source and Destination."
|
|
SYNTAX INTEGER {
|
|
source(1),
|
|
destination(2),
|
|
both(3)
|
|
}
|
|
|
|
ClagDistributionMplsProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated type for all the supported load balancing
|
|
algorithms used on the port channel interface to distribute
|
|
outgoing MPLS (Multi-Protocol Label Switching) data
|
|
frames among its component interfaces, such as
|
|
MPLS label.
|
|
|
|
label(1) MPLS label
|
|
labelIp(2) MPLS label or IP address"
|
|
SYNTAX INTEGER {
|
|
label(1),
|
|
labelIp(2)
|
|
}
|
|
|
|
ClagAggregationProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated type for all the supported aggregation
|
|
protocols.
|
|
|
|
lacp(1) Link Aggregation Control Protocol(LACP),
|
|
IEEE 802.3ad
|
|
pagp(2) Port Aggregation Protocol"
|
|
SYNTAX INTEGER {
|
|
lacp(1),
|
|
pagp(2)
|
|
}
|
|
|
|
ClagPortAdminStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated type for all the LACP administrative states on
|
|
a particular aggregation port.
|
|
|
|
off(1) No LACP involved on the aggregation port.
|
|
|
|
on(2) The aggregation port always join link
|
|
aggregation whithout any LACP protocol
|
|
involved.
|
|
|
|
active(3) Active LACP indicates the port's preference
|
|
to participate in the protocol regardless of
|
|
Partner's control value.
|
|
|
|
passive(4) Passive indicates the port's preference for
|
|
not transmitting LACP PDU unless its Partner's
|
|
control value is Active LACP."
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2),
|
|
active(3),
|
|
passive(4)
|
|
}
|
|
-- -------------------------------------------------------------
|
|
--
|
|
-- -------------------------------------------------------------
|
|
-- groups in the LAG MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
clagGlobalConfigObjects OBJECT IDENTIFIER
|
|
::= { clagMIBObjects 1 }
|
|
|
|
clagAgg OBJECT IDENTIFIER
|
|
::= { clagMIBObjects 2 }
|
|
|
|
clagAggPort OBJECT IDENTIFIER
|
|
::= { clagMIBObjects 3 }
|
|
|
|
clagAggPortList OBJECT IDENTIFIER
|
|
::= { clagMIBObjects 4 }
|
|
|
|
clagAggChannelIntf OBJECT IDENTIFIER
|
|
::= { clagMIBObjects 5 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
--
|
|
-- -------------------------------------------------------------
|
|
-- The Aggregation Global Configuration
|
|
-- -------------------------------------------------------------
|
|
|
|
clagAggDistributionProtocol OBJECT-TYPE
|
|
SYNTAX ClagDistributionProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the load balancing algorithms
|
|
used on this port channel interface to distribute outgoing
|
|
data frames among its component interfaces."
|
|
::= { clagGlobalConfigObjects 1 }
|
|
|
|
clagAggDistributionAddressMode OBJECT-TYPE
|
|
SYNTAX ClagDistributionAddressMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The load balancing address mode for the device."
|
|
::= { clagGlobalConfigObjects 2 }
|
|
|
|
clagAggDistributionMplsProtocol OBJECT-TYPE
|
|
SYNTAX ClagDistributionMplsProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the load balancing algorithms
|
|
used on this port channel interface to distribute
|
|
outgoing MPLS data frames among its component interfaces.
|
|
|
|
This object is only instantiated on platforms which
|
|
support aggregation load balancing for MPLS packets."
|
|
::= { clagGlobalConfigObjects 3 }
|
|
|
|
clagAggMaxAggregators OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum number of aggregators
|
|
supported by the device."
|
|
::= { clagGlobalConfigObjects 4 }
|
|
|
|
clagAggHashDistMethodGlobalConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adaptive(1),
|
|
fixed(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the global configuration for hash
|
|
distribution method applied on a port channel
|
|
interface among its channel members.
|
|
|
|
adaptive(1) : Adaptive hash distribution for the bundle
|
|
among port channel members.
|
|
fixed(2) : Fixed hash distribution for the bundle
|
|
among port channel members."
|
|
::= { clagGlobalConfigObjects 5 }
|
|
-- -------------------------------------------------------------
|
|
-- The Aggregation Protocol Table
|
|
-- -------------------------------------------------------------
|
|
|
|
clagAggProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClagAggProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains protocol information about every
|
|
interface which supports link aggregation."
|
|
::= { clagAgg 1 }
|
|
|
|
clagAggProtocolEntry OBJECT-TYPE
|
|
SYNTAX ClagAggProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry containing aggregation protocol type for a
|
|
particular interface. An entry is created in this
|
|
table when its associated ifEntry is created and that
|
|
interface supports link aggregation. The entry of this
|
|
table is deleted when the associated ifEntry is removed."
|
|
INDEX { ifIndex }
|
|
::= { clagAggProtocolTable 1 }
|
|
|
|
ClagAggProtocolEntry ::= SEQUENCE {
|
|
clagAggProtocolType ClagAggregationProtocol
|
|
}
|
|
|
|
clagAggProtocolType OBJECT-TYPE
|
|
SYNTAX ClagAggregationProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregation protocol type for the interface.
|
|
|
|
On some platforms, aggregation protocol may be assigned per
|
|
group. The group can be a collection of the ports which belong
|
|
to a module or system. If the aggregation protocol is assigned
|
|
to any of the ports in such group then the aggregation protocol
|
|
will apply to all ports in the same group.
|
|
|
|
On some platforms, aggregation protocol type can be assigned
|
|
per aggregator. If multiple ports belong to a aggregator,
|
|
the aggregation protocol assigned to any of the ports in such
|
|
aggregator will apply to all ports in the same."
|
|
::= { clagAggProtocolEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Aggregation Port Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
clagAggPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClagAggPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every
|
|
aggregation port that is associated with this system.
|
|
This table contains additional objects for the
|
|
dot3adAggPortTable."
|
|
REFERENCE "IEEE 802.3 Subclause 30.7.2"
|
|
::= { clagAggPort 1 }
|
|
|
|
clagAggPortEntry OBJECT-TYPE
|
|
SYNTAX ClagAggPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing additional management information
|
|
applicable to a particular aggregation port."
|
|
AUGMENTS { dot3adAggPortEntry }
|
|
::= { clagAggPortTable 1 }
|
|
|
|
ClagAggPortEntry ::= SEQUENCE {
|
|
clagAggPortAdminStatus ClagPortAdminStatus,
|
|
clagAggPortRate INTEGER
|
|
}
|
|
|
|
clagAggPortAdminStatus OBJECT-TYPE
|
|
SYNTAX ClagPortAdminStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of the LACP protocol on this
|
|
aggregation port."
|
|
::= { clagAggPortEntry 1 }
|
|
|
|
clagAggPortRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fast(1),
|
|
normal(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the requested exchange rate of LACP packets
|
|
on this interface.
|
|
fast(1) : The device requests its peers to send LACP packets
|
|
at fast rate to this interface.
|
|
normal(2): The decice requests its peers to send LACP packets
|
|
at normal rate to this interface."
|
|
::= { clagAggPortEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Port List Table
|
|
-- -------------------------------------------------------------
|
|
|
|
clagAggPortListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClagAggPortListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments the dot3adAggPortListTable and
|
|
provides the complete list of ports associated with
|
|
each Aggregator."
|
|
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30"
|
|
::= { clagAggPortList 1 }
|
|
|
|
clagAggPortListEntry OBJECT-TYPE
|
|
SYNTAX ClagAggPortListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of the ports associated with a given Aggregator."
|
|
AUGMENTS { dot3adAggPortListEntry }
|
|
::= { clagAggPortListTable 1 }
|
|
|
|
ClagAggPortListEntry ::= SEQUENCE {
|
|
clagAggPortListPorts OCTET STRING,
|
|
clagAggPortListInterfaceIndexList CiscoInterfaceIndexList
|
|
}
|
|
|
|
clagAggPortListPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains a list of ports currently associated
|
|
with this Aggregator in the format of
|
|
'[number_of_ports][cieIfDot1dBaseMappingPort1][...]
|
|
[cieIfDot1dBaseMappingPortn]'
|
|
|
|
where
|
|
[number_of_ports] is of size 2 octet and indicates
|
|
the number of ports contains in this object. It
|
|
also indicates the number of cieIfDot1dBaseMappingPort field
|
|
following this field.
|
|
|
|
[cieIfDot1dBaseMappingPort'n'] is the value of
|
|
cieIfDot1dBaseMappingPort of the 'n' port associated with this
|
|
Aggregation and has size of 2 octets where n is up to
|
|
[number_of_ports]."
|
|
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30"
|
|
::= { clagAggPortListEntry 1 }
|
|
|
|
clagAggPortListInterfaceIndexList OBJECT-TYPE
|
|
SYNTAX CiscoInterfaceIndexList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains a list of ports currently associated
|
|
with this Aggregator in the format of CiscoInterfaceIndexList."
|
|
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30"
|
|
::= { clagAggPortListEntry 2}
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Aggregation Channel Interface Table
|
|
-- -------------------------------------------------------------
|
|
|
|
clagAggChannelIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClagAggChannelIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table providing port channel
|
|
configuration information for port channel
|
|
interfaces identified by ifIndex."
|
|
::= { clagAggChannelIntf 1 }
|
|
|
|
clagAggChannelIfEntry OBJECT-TYPE
|
|
SYNTAX ClagAggChannelIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing port channel
|
|
configuration information for port
|
|
channel interfaces."
|
|
INDEX { ifIndex }
|
|
::= { clagAggChannelIfTable 1 }
|
|
|
|
ClagAggChannelIfEntry ::= SEQUENCE {
|
|
clagAggChannelIfFastSwitchOver TruthValue,
|
|
clagAggChannelIfMaxBundle Unsigned32,
|
|
clagAggChannelIfMinLink Unsigned32,
|
|
clagAggChannelIfHashDistAdminMethod INTEGER,
|
|
clagAggChannelIfHashDistOperMethod INTEGER
|
|
}
|
|
|
|
clagAggChannelIfFastSwitchOver OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether LACP protocol fast switchover
|
|
mode is enabled on this port channel interface
|
|
or not."
|
|
::= { clagAggChannelIfEntry 1 }
|
|
|
|
clagAggChannelIfMaxBundle OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum number of member
|
|
ports that can be bundled on this port
|
|
channel interface for LACP protocol."
|
|
::= { clagAggChannelIfEntry 2 }
|
|
|
|
clagAggChannelIfMinLink OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum number of bundled member ports that are
|
|
needed in order for this port channel interface to be
|
|
operational.
|
|
A value of zero for this object indicates that no minimum
|
|
number of bundled member ports are required for this port
|
|
channel interface to be operational."
|
|
::= { clagAggChannelIfEntry 3 }
|
|
|
|
clagAggChannelIfHashDistAdminMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
adaptive(2),
|
|
fixed(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the hash distribution method that is administratively
|
|
configured on this port channel interface upon its channel
|
|
membership transition event.
|
|
|
|
none(1) : Hash distribution algorithm on this
|
|
port channel interface is not specifically
|
|
configured and global configuration of
|
|
clagAggHashDistMethodGlobalConfig will
|
|
be applied on this port channel interface.
|
|
adaptive(2) : Adaptive hash distribution for this port
|
|
channel interface among its channel members.
|
|
fixed(3) : Fixed hash distribution for this port channel
|
|
interface among its channel members."
|
|
::= { clagAggChannelIfEntry 4 }
|
|
|
|
clagAggChannelIfHashDistOperMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
adaptive(2),
|
|
fixed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operational hash distribution method
|
|
for this port channel interface among the port channel members.
|
|
|
|
other(1) : None of the following.
|
|
adaptive(2) : Adaptive hash distribution for the
|
|
port channel interface among its
|
|
channel members.
|
|
fixed(3) : Fixed hash distribution for the port
|
|
channel among channel members."
|
|
::= { clagAggChannelIfEntry 5 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Notifications
|
|
-- -------------------------------------------------------------
|
|
|
|
clagMIBNotifications OBJECT IDENTIFIER
|
|
::= { ciscoLagMIB 2 }
|
|
|
|
-- no notifications defined
|
|
--
|
|
-- -------------------------------------------------------------
|
|
-- Conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
clagMIBConformance OBJECT IDENTIFIER
|
|
::= { ciscoLagMIB 3 }
|
|
|
|
clagMIBCompliances OBJECT IDENTIFIER
|
|
::= { clagMIBConformance 1 }
|
|
|
|
clagMIBGroups OBJECT IDENTIFIER
|
|
::= { clagMIBConformance 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
--
|
|
-- -------------------------------------------------------------
|
|
-- Compliance
|
|
-- -------------------------------------------------------------
|
|
|
|
clagMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Link Aggregation MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clagAggProtocolGroup,
|
|
clagAggPortGroup
|
|
}
|
|
|
|
GROUP clagAggDistributionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing."
|
|
|
|
OBJECT clagAggProtocolType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { clagMIBCompliances 1 }
|
|
|
|
clagMIBCompliance2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Link Aggregation MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clagAggProtocolGroup,
|
|
clagAggPortGroup
|
|
}
|
|
|
|
GROUP clagAggDistributionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing."
|
|
|
|
GROUP clagAggDistributionMplsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing for MPLS
|
|
packets."
|
|
|
|
OBJECT clagAggProtocolType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { clagMIBCompliances 2 }
|
|
|
|
clagMIBCompliance3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Link Aggregation MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clagAggProtocolGroup,
|
|
clagAggPortGroup
|
|
}
|
|
|
|
GROUP clagAggDistributionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing."
|
|
|
|
GROUP clagAggDistributionMplsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing for MPLS
|
|
packets."
|
|
|
|
GROUP clagAggPortListGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supports dot1dBasePort value greater than 2048."
|
|
|
|
OBJECT clagAggProtocolType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { clagMIBCompliances 3 }
|
|
|
|
clagMIBCompliance4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Link Aggregation MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clagAggProtocolGroup,
|
|
clagAggPortGroup
|
|
}
|
|
|
|
GROUP clagAggDistributionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing."
|
|
|
|
GROUP clagAggDistributionMplsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing for MPLS
|
|
packets."
|
|
|
|
GROUP clagAggPortListGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supports dot1dBasePort value greater than 2048."
|
|
|
|
GROUP clagAggMaxAggregatorsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
provides the information about the maximum number
|
|
of aggregators supported by the device."
|
|
|
|
OBJECT clagAggProtocolType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { clagMIBCompliances 4 }
|
|
|
|
clagMIBCompliance5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Link Aggregation MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clagAggProtocolGroup,
|
|
clagAggPortGroup
|
|
}
|
|
|
|
GROUP clagAggDistributionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing."
|
|
|
|
GROUP clagAggDistributionMplsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing for MPLS
|
|
packets."
|
|
|
|
GROUP clagAggPortListGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supports dot1dBasePort value greater than 2048."
|
|
|
|
GROUP clagAggMaxAggregatorsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
provides the information about the maximum number
|
|
of aggregators supported by the device."
|
|
|
|
GROUP clagAggRateGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support
|
|
LACP packet ingression rate on interfaces."
|
|
|
|
GROUP clagAggChannelIfLacpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support the LACP port channel configurations on
|
|
port channel interfaces."
|
|
|
|
GROUP clagAggChannelIfHashDistMethodGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support the hash distribution method configurations on
|
|
port channel interfaces."
|
|
|
|
GROUP clagAggHashDistGlobalGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which support
|
|
global configuration of hash distribution method on
|
|
port channel interface."
|
|
|
|
GROUP clagAggChannelIfMinLinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support minimum link configurations on port channel
|
|
interfaces."
|
|
|
|
OBJECT clagAggDistributionProtocol
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggDistributionAddressMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggDistributionMplsProtocol
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggHashDistMethodGlobalConfig
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggProtocolType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfFastSwitchOver
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfMaxBundle
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfMinLink
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfHashDistAdminMethod
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { clagMIBCompliances 5 }
|
|
|
|
clagMIBCompliance6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Link Aggregation MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clagAggProtocolGroup,
|
|
clagAggPortGroup
|
|
}
|
|
|
|
GROUP clagAggDistributionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing."
|
|
|
|
GROUP clagAggDistributionMplsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supported aggregation load balancing for MPLS
|
|
packets."
|
|
|
|
GROUP clagAggPortListGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
supports dot1dBasePort value greater than 2048."
|
|
|
|
GROUP clagAggMaxAggregatorsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
provides the information about the maximum number
|
|
of aggregators supported by the device."
|
|
|
|
GROUP clagAggRateGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support
|
|
LACP packet ingression rate on interfaces."
|
|
|
|
GROUP clagAggChannelIfLacpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support the LACP port channel configurations on
|
|
port channel interfaces."
|
|
|
|
GROUP clagAggChannelIfHashDistMethodGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support the hash distribution method configurations on
|
|
port channel interfaces."
|
|
|
|
GROUP clagAggHashDistGlobalGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which support
|
|
global configuration of hash distribution method on
|
|
port channel interface."
|
|
|
|
GROUP clagAggChannelIfMinLinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support minimum link configurations on port channel
|
|
interfaces."
|
|
|
|
GROUP clagAggPortListInterfaceIndexGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for the devices which
|
|
support Layer3 LACP interfaces."
|
|
|
|
OBJECT clagAggDistributionProtocol
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggDistributionAddressMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggDistributionMplsProtocol
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggHashDistMethodGlobalConfig
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggProtocolType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggPortRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfFastSwitchOver
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfMaxBundle
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfMinLink
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT clagAggChannelIfHashDistAdminMethod
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { clagMIBCompliances 6 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of Conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
clagAggProtocolGroup OBJECT-GROUP
|
|
OBJECTS { clagAggProtocolType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object that provide aggregation protocol type of an
|
|
interface. These are additional to the IEEE Std 802.3ad
|
|
MIB."
|
|
::= { clagMIBGroups 1 }
|
|
|
|
clagAggPortGroup OBJECT-GROUP
|
|
OBJECTS { clagAggPortAdminStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provide admin status
|
|
about an aggregation port. These are additional to the
|
|
IEEE Std 802.3ad MIB."
|
|
::= { clagMIBGroups 2 }
|
|
|
|
clagAggDistributionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clagAggDistributionProtocol,
|
|
clagAggDistributionAddressMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provide the load balancing
|
|
information for an aggregator. These are additional to
|
|
the IEEE Std 802.3ad MIB."
|
|
::= { clagMIBGroups 3 }
|
|
|
|
clagAggDistributionMplsGroup OBJECT-GROUP
|
|
OBJECTS { clagAggDistributionMplsProtocol }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provide the load balancing
|
|
information for an aggregator for MPLS packets.
|
|
These are additional to the IEEE Std 802.3ad MIB."
|
|
::= { clagMIBGroups 4 }
|
|
|
|
clagAggPortListGroup OBJECT-GROUP
|
|
OBJECTS { clagAggPortListPorts }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of object that provides information about
|
|
ports in an aggregation."
|
|
::= { clagMIBGroups 5 }
|
|
|
|
clagAggMaxAggregatorsGroup OBJECT-GROUP
|
|
OBJECTS { clagAggMaxAggregators }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of object that provides information about
|
|
the maximum number of aggregators supported by the
|
|
device."
|
|
::= { clagMIBGroups 6 }
|
|
|
|
clagAggRateGroup OBJECT-GROUP
|
|
OBJECTS { clagAggPortRate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of object that provides information about
|
|
the rate at which LACP packets are ingressed on
|
|
interfaces."
|
|
::= { clagMIBGroups 7 }
|
|
|
|
clagAggChannelIfLacpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clagAggChannelIfFastSwitchOver,
|
|
clagAggChannelIfMaxBundle
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provides information about
|
|
the LACP protocol configurations for port channel
|
|
interfaces."
|
|
::= { clagMIBGroups 8 }
|
|
|
|
clagAggChannelIfHashDistMethodGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clagAggChannelIfHashDistAdminMethod,
|
|
clagAggChannelIfHashDistOperMethod
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provides information about
|
|
the port channel configurations of hash distribution
|
|
method on port channel interfaces."
|
|
::= { clagMIBGroups 9 }
|
|
|
|
clagAggHashDistGlobalGroup OBJECT-GROUP
|
|
OBJECTS { clagAggHashDistMethodGlobalConfig }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of object that provides information about global
|
|
configuration of hash distribution method on port channel
|
|
interface."
|
|
::= { clagMIBGroups 10 }
|
|
|
|
clagAggChannelIfMinLinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clagAggChannelIfMinLink
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provides information about
|
|
the minimum link configurations for port channel
|
|
interfaces."
|
|
::= { clagMIBGroups 11 }
|
|
|
|
clagAggPortListInterfaceIndexGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clagAggPortListInterfaceIndexList
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that provides information about
|
|
ports in an aggregation in the format of
|
|
CiscoInterfaceIndexList."
|
|
::= { clagMIBGroups 12 }
|
|
|
|
END
|
|
|