david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/cisco/CISCO-PROCESS-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

2916 lines
101 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-PROCESS-MIB.my: MIB for CPU and process statistics
--
-- August 1998, Ramanathan R. Kavasseri
--
-- Copyright (c) 1998, 2001, 2003, 2006-2011 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from RFC xxx
CISCO-PROCESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32,
Unsigned32,
NOTIFICATION-TYPE,
Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeStamp,
DisplayString,
RowStatus,
TruthValue,
RowPointer,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
CounterBasedGauge64
FROM HCNUM-TC
EntPhysicalIndexOrZero,
Unsigned64
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoProcessMIB MODULE-IDENTITY
LAST-UPDATED "201106230000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"The MIB module to describe active system processes.
Virtual Machine refers to those OS which can run the
code or process of a different executional model OS.
Virtual Process assume the executional model
of a OS which is different from Native OS. Virtual
Processes are also referred as Tasks.
Thread is a sequence of instructions to be executed
within a program. Thread which adhere to POSIX standard
is referred as a POSIX thread."
REVISION "201106230000Z"
DESCRIPTION
"Added new table cpmCoreTable as well as a new optoinal
compliance group cpmCoreGroup."
REVISION "201005060000Z"
DESCRIPTION
"Added the following new objects to the cpmCPUTotalTable.
cpmCPUMemoryCommitted, cpmCPUMemoryCommittedOvrFlow and
cpmCPUMemoryHCCommitted.
Added new compliance group cpmCPUTotalMemoryCommitGroup which
includes Committed memory objects.
Added new compliance cProcessMIBComplianceRev5 which
deprecates cProcessMIBComplianceRev4."
REVISION "200910120000Z"
DESCRIPTION
"Added TEXTUAL-CONVENTION called CPULoadAverage.
Added the following new objects to cpmCPUTotalTable.
cpmCPULoadAvg1min, cpmCPULoadAvg5min, cpmCPULoadAvg15min.
Added new compliance group cpmCPULoadAvgGroup which includes
load average objects.
Added new compliance cProcessMIBComplianceRev4 which
deprecates cProcessMIBComplianceRev3."
REVISION "200901230000Z"
DESCRIPTION
"Added the following new objects to cpmCPUTotalTable.
cpmCPUMemoryUsedOvrflw, cpmCPUMemoryHCUsed,
cpmCPUMemoryFreeOvrflw, cpmCPUMemoryHCFree,
cpmCPUMemoryKernelReservedOvrflw, cpmCPUMemoryHCKernelReserved,
cpmCPUMemoryLowestOvrflw, cpmCPUMemoryHCLowest
Added the following new objects to cpmProcessExtRevTable.
cpmProcExtMemAllocatedRevOvrflw, cpmProcExtHCMemAllocatedRev,
cpmProcExtMemFreedRevOvrflw, cpmProcExtHCMemFreedRev,
cpmProcessTextSegmentSizeOvrflw, cpmProcessHCTextSegmentSize,
cpmProcessDataSegmentSizeOvrflw, cpmProcessHCDataSegmentSize,
cpmProcessStackSizeOvrflw, cpmProcessHCStackSize,
cpmProcessDynamicMemorySizeOvrflw, cpmProcessHCDynamicMemorySize
Added the following new objects to cpmThreadTable.
cpmThreadStackSizeOvrflw, cpmThreadHCStackSize
Added the following new objects to cpmVirtualProcessTable.
cpmVirtualProcessMemAllocatedOvrflw,
cpmVirtualProcessHCMemAllocated,
cpmVirtualProcessMemFreedOvrflw, cpmVirtualProcessHCMemFreed
Added following new compliance groups.
cpmCPUTotalOverflowGroup, cpmCPUTotalOverflowGroup,
cpmProcessExtRevOverflowGroup, cpmProcessExtRevHCGroup,
cpmThreadOverflowGroup, cpmThreadHCGroup,
cpmVirtualProcessOverflowGroup, cpmVirtualProcessHCGroup
Added new compliance cProcessMIBComplianceRev3 which deprecates
cProcessMIBComplianceRev2."
REVISION "200703230000Z"
DESCRIPTION
"Added new objects to support POSIX compliant OS. Added
cpmThread, cpmThreadTable, cpmVirtualProcess,
cpmVirtualProcessTable and updated cpmCPUTotalTable,
cpmProcessExtRevTable. Added cProcessMIBComplianceRev2
by deprecating cProcessMIBComplianceRev1. Added
cpmCPUPosixMemoryGroup, cpmPosixProcessGroup,
cpmThreadGroup, cpmVirtualProcessGroup."
REVISION "200301220000Z"
DESCRIPTION
"cpmCPUThresholdTable, cpmCPUHistoryTable,
cpmCPUProcessHistoryTable are added for CPU thresholding
feature."
REVISION "200105180000Z"
DESCRIPTION
"The objects cpmProcExtUtil5Sec, cpmProcExtUtil1Min,
cpmProcExtUtil5Min,cpmCPUTotal5sec, cpmCPUTotal1min
and cpmCPUTotal5min are deprecated to increase the
value range as 0..100. The table cpmProcessExtTable
is deprecated. The new objects added are
cpmProcessExtRevTable, cpmProcExtMemAllocatedRev,
cpmProcExtMemFreedRev, cpmProcExtInvokedRev,
cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev,
cpmProcExtUtil1MinRev, cpmCPUTotal5MinRev,
cpmCPUTotal5secRev, cpmCPUTotal1minRev and
cpmCPUTotal5minRev."
REVISION "9804150000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ciscoMgmt 109 }
CPULoadAverage ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The average number of processes in the queue waiting for CPU
time over the last N minutes, where the N is defined by the
object using this TC. This is similar to UNIX/Linux system load
average. The calculation may vary by different OS kernels, so
refer to the specific system document of your interest.
The object value, which uses this TC, reflects the average
number of runnable processes with units of hundredths of
processes, i.e. a value of 183 indicates the average number of
runnable processes over the N minutes is 1.83."
SYNTAX Unsigned32
-- This MIB displays memory and CPU utilization on cisco devices. CPU
-- utilization will give a general idea of how busy the processor is.
-- The numbers are a ratio of the current idle time over the longest
-- idle time. Please note that this information should be used as an
-- estimate only.
ciscoProcessMIBObjects OBJECT IDENTIFIER
::= { ciscoProcessMIB 1 }
cpmCPU OBJECT IDENTIFIER
::= { ciscoProcessMIBObjects 1 }
cpmProcess OBJECT IDENTIFIER
::= { ciscoProcessMIBObjects 2 }
cpmThread OBJECT IDENTIFIER
::= { ciscoProcessMIBObjects 3 }
cpmVirtualProcess OBJECT IDENTIFIER
::= { ciscoProcessMIBObjects 4 }
cpmCPUHistory OBJECT IDENTIFIER
::= { cpmProcess 5 }
-- Cisco CPU Total Table
cpmCPUTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmCPUTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of overall CPU statistics."
::= { cpmCPU 1 }
cpmCPUTotalEntry OBJECT-TYPE
SYNTAX CpmCPUTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Overall information about the CPU load. Entries in this
table come and go as CPUs are added and removed from the
system."
INDEX { cpmCPUTotalIndex }
::= { cpmCPUTotalTable 1 }
CpmCPUTotalEntry ::= SEQUENCE {
cpmCPUTotalIndex Unsigned32,
cpmCPUTotalPhysicalIndex EntPhysicalIndexOrZero,
cpmCPUTotal5sec Gauge32,
cpmCPUTotal1min Gauge32,
cpmCPUTotal5min Gauge32,
cpmCPUTotal5secRev Gauge32,
cpmCPUTotal1minRev Gauge32,
cpmCPUTotal5minRev Gauge32,
cpmCPUMonInterval Unsigned32,
cpmCPUTotalMonIntervalValue Gauge32,
cpmCPUInterruptMonIntervalValue Gauge32,
cpmCPUMemoryUsed Gauge32,
cpmCPUMemoryFree Gauge32,
cpmCPUMemoryKernelReserved Gauge32,
cpmCPUMemoryLowest Gauge32,
cpmCPUMemoryUsedOvrflw Gauge32,
cpmCPUMemoryHCUsed CounterBasedGauge64,
cpmCPUMemoryFreeOvrflw Gauge32,
cpmCPUMemoryHCFree Counter64,
cpmCPUMemoryKernelReservedOvrflw Gauge32,
cpmCPUMemoryHCKernelReserved CounterBasedGauge64,
cpmCPUMemoryLowestOvrflw Gauge32,
cpmCPUMemoryHCLowest CounterBasedGauge64,
cpmCPULoadAvg1min CPULoadAverage,
cpmCPULoadAvg5min CPULoadAverage,
cpmCPULoadAvg15min CPULoadAverage,
cpmCPUMemoryCommitted Gauge32,
cpmCPUMemoryCommittedOvrflw Gauge32,
cpmCPUMemoryHCCommitted CounterBasedGauge64
}
cpmCPUTotalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely represents a CPU (or group of CPUs)
whose CPU load information is reported by a row in this table.
This index is assigned arbitrarily by the engine
and is not saved over reboots."
::= { cpmCPUTotalEntry 1 }
cpmCPUTotalPhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex of the physical entity for which
the CPU statistics in this entry are maintained.
The physical entity can be a CPU chip, a group of CPUs,
a CPU card etc. The exact type of this entity is described by
its entPhysicalVendorType value. If the CPU statistics
in this entry correspond to more than one physical entity
(or to no physical entity), or if the entPhysicalTable is
not supported on the SNMP agent, the value of this object
must be zero."
::= { cpmCPUTotalEntry 2 }
cpmCPUTotal5sec OBJECT-TYPE
SYNTAX Gauge32 (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The overall CPU busy percentage in the last 5 second
period. This object obsoletes the busyPer object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal5secRev which has the changed range of
value (0..100)."
::= { cpmCPUTotalEntry 3 }
cpmCPUTotal1min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The overall CPU busy percentage in the last 1 minute
period. This object obsoletes the avgBusy1 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal1minRev which has the changed range
of value (0..100)."
::= { cpmCPUTotalEntry 4 }
cpmCPUTotal5min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The overall CPU busy percentage in the last 5 minute
period. This object deprecates the avgBusy5 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal5minRev which has the changed range
of value (0..100)."
::= { cpmCPUTotalEntry 5 }
cpmCPUTotal5secRev OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The overall CPU busy percentage in the last 5 second
period. This object deprecates the object cpmCPUTotal5sec
and increases the value range to (0..100). This object
is deprecated by cpmCPUTotalMonIntervalValue"
::= { cpmCPUTotalEntry 6 }
cpmCPUTotal1minRev OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 1 minute
period. This object deprecates the object cpmCPUTotal1min
and increases the value range to (0..100)."
::= { cpmCPUTotalEntry 7 }
cpmCPUTotal5minRev OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 5 minute
period. This object deprecates the object cpmCPUTotal5min
and increases the value range to (0..100)."
::= { cpmCPUTotalEntry 8 }
cpmCPUMonInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU usage monitoring interval. The value of this
object in seconds indicates the how often the
CPU utilization is calculated and monitored."
::= { cpmCPUTotalEntry 9 }
cpmCPUTotalMonIntervalValue OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last
cpmCPUMonInterval period.
This object deprecates the object cpmCPUTotal5secRev."
::= { cpmCPUTotalEntry 10 }
cpmCPUInterruptMonIntervalValue OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the
interrupt context in the last cpmCPUMonInterval
period."
::= { cpmCPUTotalEntry 11 }
cpmCPUMemoryUsed OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is currently
under use."
::= { cpmCPUTotalEntry 12 }
cpmCPUMemoryFree OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is currently
free."
::= { cpmCPUTotalEntry 13 }
cpmCPUMemoryKernelReserved OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is reserved
for kernel usage."
::= { cpmCPUTotalEntry 14 }
cpmCPUMemoryLowest OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest free memory that has been recorded since
device has booted."
::= { cpmCPUTotalEntry 15 }
cpmCPUMemoryUsedOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of cpmCPUMemoryUsed.
This object needs to be supported only when the value of
cpmCPUMemoryUsed exceeds 32-bit, otherwise this object value
would be set to 0."
::= { cpmCPUTotalEntry 16 }
cpmCPUMemoryHCUsed OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is currently under
use. This object is a 64-bit version of cpmCPUMemoryUsed."
::= { cpmCPUTotalEntry 17 }
cpmCPUMemoryFreeOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of cpmCPUMemoryFree.
This object needs to be supported only when the value of
cpmCPUMemoryFree exceeds 32-bit, otherwise this object value
would be set to 0."
::= { cpmCPUTotalEntry 18 }
cpmCPUMemoryHCFree OBJECT-TYPE
SYNTAX Counter64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is currently free.
This object is a 64-bit version of cpmCPUMemoryFree."
::= { cpmCPUTotalEntry 19 }
cpmCPUMemoryKernelReservedOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmCPUMemoryKernelReserved. This object needs
to be supported only when the value of
cpmCPUMemoryKernelReserved exceeds 32-bit, otherwise
this object value would be set to 0."
::= { cpmCPUTotalEntry 20 }
cpmCPUMemoryHCKernelReserved OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is reserved
for kernel usage. This object is a 64-bit version of
cpmCPUMemoryKernelReserved."
::= { cpmCPUTotalEntry 21 }
cpmCPUMemoryLowestOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of cpmCPUMemoryLowest.
This object needs to be supported only when the value of
cpmCPUMemoryLowest exceeds 32-bit, otherwise this object value
would be set to 0."
::= { cpmCPUTotalEntry 22 }
cpmCPUMemoryHCLowest OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest free memory that has been recorded since device has
booted. This object is a 64-bit version of cpmCPUMemoryLowest."
::= { cpmCPUTotalEntry 23 }
cpmCPULoadAvg1min OBJECT-TYPE
SYNTAX CPULoadAverage
UNITS "hundredths of processes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU load Average in the last 1 minute period"
::= { cpmCPUTotalEntry 24 }
cpmCPULoadAvg5min OBJECT-TYPE
SYNTAX CPULoadAverage
UNITS "hundredths of processes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU load Average in the last 5 minutes period"
::= { cpmCPUTotalEntry 25 }
cpmCPULoadAvg15min OBJECT-TYPE
SYNTAX CPULoadAverage
UNITS "hundredths of processes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU load Average in the last 15 minutes period"
::= { cpmCPUTotalEntry 26 }
cpmCPUMemoryCommitted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is currently
Committed."
::= { cpmCPUTotalEntry 27 }
cpmCPUMemoryCommittedOvrflw OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmCPUMemoryCommitted.
This object needs to be supported only when the value of
cpmCPUMemoryCommitted exceeds 32-bit, otherwise this object
value would be set to 0."
::= { cpmCPUTotalEntry 28 }
cpmCPUMemoryHCCommitted OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU wide system memory which is currently
committed. This object is a 64-bit version of
cpmCPUMemoryCommitted"
::= { cpmCPUTotalEntry 29 }
-- Cisco Core Table
cpmCoreTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmCoreEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of per-Core statistics."
::= { cpmCPU 2 }
cpmCoreEntry OBJECT-TYPE
SYNTAX CpmCoreEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Overall information about the Core load. Entries in this
table could come and go as Cores go online or offline."
INDEX {
cpmCPUTotalIndex,
cpmCoreIndex
}
::= { cpmCoreTable 1 }
CpmCoreEntry ::= SEQUENCE {
cpmCoreIndex Unsigned32,
cpmCorePhysicalIndex EntPhysicalIndexOrZero,
cpmCore5sec Gauge32,
cpmCore1min Gauge32,
cpmCore5min Gauge32,
cpmCoreLoadAvg1min CPULoadAverage,
cpmCoreLoadAvg5min CPULoadAverage,
cpmCoreLoadAvg15min CPULoadAverage
}
cpmCoreIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely represents a Core (or group of Cores)
whose Core load information is reported by a row in this table.
This index is assigned arbitrarily by the engine
and is not saved over reboots."
::= { cpmCoreEntry 1 }
cpmCorePhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entCorePhysicalIndex of the physical entity for which
the Core statistics in this entry are maintained.
The physical entity can be a CPU chip, a group of CPUs,
a CPU card etc. The exact type of this entity is described by
its entPhysicalVendorType value. If the Core statistics
in this entry correspond to more than one physical entity
(or to no physical entity), or if the entPhysicalTable is
not supported on the SNMP agent, the value of this object
must be zero."
::= { cpmCoreEntry 2 }
cpmCore5sec OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall Core busy percentage in the last 5 second
period."
::= { cpmCoreEntry 3 }
cpmCore1min OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall Core busy percentage in the last 1 minute
period."
::= { cpmCoreEntry 4 }
cpmCore5min OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall Core busy percentage in the last 5 minute
period."
::= { cpmCoreEntry 5 }
cpmCoreLoadAvg1min OBJECT-TYPE
SYNTAX CPULoadAverage
UNITS "hundredths of processes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall Core load Average in the last 1 minute period"
::= { cpmCoreEntry 6 }
cpmCoreLoadAvg5min OBJECT-TYPE
SYNTAX CPULoadAverage
UNITS "hundredths of processes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall Core load Average in the last 5 minutes period"
::= { cpmCoreEntry 7 }
cpmCoreLoadAvg15min OBJECT-TYPE
SYNTAX CPULoadAverage
UNITS "hundredths of processes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall Core load Average in the last 15 minutes period"
::= { cpmCoreEntry 8 }
-- Cisco Processes Common Table
cpmProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of generic information on all active
processes on this device."
::= { cpmProcess 1 }
cpmProcessEntry OBJECT-TYPE
SYNTAX CpmProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Generic information about an active process on this
device. Entries in this table come and go as processes are
created and destroyed by the device."
INDEX {
cpmCPUTotalIndex,
cpmProcessPID
}
::= { cpmProcessTable 1 }
CpmProcessEntry ::= SEQUENCE {
cpmProcessPID Unsigned32,
cpmProcessName DisplayString,
cpmProcessuSecs Unsigned32,
cpmProcessTimeCreated TimeStamp,
cpmProcessAverageUSecs Unsigned32
}
cpmProcessPID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the process ID. cpmTimeCreated
should be checked against the last time it was polled,
and if it has changed the PID has been reused and the
entire entry should be polled again."
::= { cpmProcessEntry 1 }
cpmProcessName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name associated with this process. If the name is
longer than 32 characters, it will be truncated to the first
31 characters, and a `*' will be appended as the last
character to imply this is a truncated process name."
::= { cpmProcessEntry 2 }
cpmProcessuSecs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Average elapsed CPU time in microseconds when the
process was active. This object is deprecated
by cpmProcessAverageUSecs."
::= { cpmProcessEntry 4 }
cpmProcessTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the process was created. The process ID
and the time when the process was created, uniquely
identifies a process."
::= { cpmProcessEntry 5 }
cpmProcessAverageUSecs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average elapsed CPU time in microseconds when the
process was active. This object deprecates the
object cpmProcessuSecs."
::= { cpmProcessEntry 6 }
-- Cisco processes detail Table. This table is mandatory on systems
-- that have the internal capability to keep the information.
cpmProcessExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmProcessExtEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains information that may or may
not be available on all cisco devices. It contains
additional objects for the more general
cpmProcessTable. This object is deprecated by
cpmProcessExtRevTable."
::= { cpmProcess 2 }
cpmProcessExtEntry OBJECT-TYPE
SYNTAX CpmProcessExtEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry containing additional information for
a particular process. This object is deprecated by
cpmProcessExtRevEntry."
AUGMENTS { cpmProcessEntry }
::= { cpmProcessExtTable 1 }
CpmProcessExtEntry ::= SEQUENCE {
cpmProcExtMemAllocated Gauge32,
cpmProcExtMemFreed Gauge32,
cpmProcExtInvoked Counter32,
cpmProcExtRuntime Counter32,
cpmProcExtUtil5Sec Gauge32,
cpmProcExtUtil1Min Gauge32,
cpmProcExtUtil5Min Gauge32,
cpmProcExtPriority INTEGER
}
cpmProcExtMemAllocated OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The sum of all the dynamically allocated memory that
this process has received from the system. This includes
memory that may have been returned. The sum of freed
memory is provided by cpmProcExtMemFreed. This object
is deprecated by cpmProcExtMemAllocatedRev."
::= { cpmProcessExtEntry 1 }
cpmProcExtMemFreed OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The sum of all memory that this process has returned
to the system. This object is deprecated by
cpmProcExtMemFreedRev."
::= { cpmProcessExtEntry 2 }
cpmProcExtInvoked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times since cpmTimeCreated that
the process has been invoked. This object is
deprecated by cpmProcExtInvokedRev."
::= { cpmProcessExtEntry 3 }
cpmProcExtRuntime OBJECT-TYPE
SYNTAX Counter32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of CPU time the process has used, in
microseconds. This object is deprecated by
cpmProcExtRuntimeRev."
::= { cpmProcessExtEntry 4 }
cpmProcExtUtil5Sec OBJECT-TYPE
SYNTAX Gauge32 (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object provides a general idea of how busy
a process caused the processor to be over a 5
second period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object is
deprecated by cpmProcExtUtil5SecRev which has the
changed range of value (0..100)."
::= { cpmProcessExtEntry 5 }
cpmProcExtUtil1Min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object provides a general idea of how busy
a process caused the processor to be over a 1
minute period. It is determined as a weighted
decaying average of the current idle time over the
longest idle time. Note that this information
should be used as an estimate only. This object is
deprecated by cpmProcExtUtil1MinRev which has
the changed range of value (0..100)."
::= { cpmProcessExtEntry 6 }
cpmProcExtUtil5Min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object provides a general idea of how busy
a process caused the processor to be over a 5
minute period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object
is deprecated by cpmProcExtUtil5MinRev which
has the changed range of value (0..100)."
::= { cpmProcessExtEntry 7 }
cpmProcExtPriority OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
high(2),
normal(3),
low(4),
notAssigned(5)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The priority level at which the process is
running. This object is deprecated by
cpmProcExtPriorityRev."
::= { cpmProcessExtEntry 8 }
cpmProcessExtRevTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmProcessExtRevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information that may or may
not be available on all cisco devices. It contains
additional objects for the more general
cpmProcessTable. This object deprecates
cpmProcessExtTable."
::= { cpmProcess 3 }
cpmProcessExtRevEntry OBJECT-TYPE
SYNTAX CpmProcessExtRevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional information for
a particular process. This object deprecates
cpmProcessExtEntry."
INDEX {
cpmCPUTotalIndex,
cpmProcessPID
}
::= { cpmProcessExtRevTable 1 }
CpmProcessExtRevEntry ::= SEQUENCE {
cpmProcExtMemAllocatedRev Gauge32,
cpmProcExtMemFreedRev Gauge32,
cpmProcExtInvokedRev Counter32,
cpmProcExtRuntimeRev Counter32,
cpmProcExtUtil5SecRev Gauge32,
cpmProcExtUtil1MinRev Gauge32,
cpmProcExtUtil5MinRev Gauge32,
cpmProcExtPriorityRev INTEGER,
cpmProcessType INTEGER,
cpmProcessRespawn TruthValue,
cpmProcessRespawnCount Counter32,
cpmProcessRespawnAfterLastPatch Counter32,
cpmProcessMemoryCore INTEGER,
cpmProcessLastRestartUser SnmpAdminString,
cpmProcessTextSegmentSize Unsigned32,
cpmProcessDataSegmentSize Gauge32,
cpmProcessStackSize Gauge32,
cpmProcessDynamicMemorySize Gauge32,
cpmProcExtMemAllocatedRevOvrflw Gauge32,
cpmProcExtHCMemAllocatedRev CounterBasedGauge64,
cpmProcExtMemFreedRevOvrflw Gauge32,
cpmProcExtHCMemFreedRev CounterBasedGauge64,
cpmProcessTextSegmentSizeOvrflw Unsigned32,
cpmProcessHCTextSegmentSize Unsigned64,
cpmProcessDataSegmentSizeOvrflw Gauge32,
cpmProcessHCDataSegmentSize CounterBasedGauge64,
cpmProcessStackSizeOvrflw Gauge32,
cpmProcessHCStackSize CounterBasedGauge64,
cpmProcessDynamicMemorySizeOvrflw Gauge32,
cpmProcessHCDynamicMemorySize CounterBasedGauge64
}
cpmProcExtMemAllocatedRev OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all the dynamically allocated memory that
this process has received from the system. This includes
memory that may have been returned. The sum of freed
memory is provided by cpmProcExtMemFreedRev. This object
deprecates cpmProcExtMemAllocated."
::= { cpmProcessExtRevEntry 1 }
cpmProcExtMemFreedRev OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all memory that this process has returned
to the system. This object deprecates
cpmProcExtMemFreed."
::= { cpmProcessExtRevEntry 2 }
cpmProcExtInvokedRev OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times since cpmTimeCreated that
the process has been invoked. This object
deprecates cpmProcExtInvoked."
::= { cpmProcessExtRevEntry 3 }
cpmProcExtRuntimeRev OBJECT-TYPE
SYNTAX Counter32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of CPU time the process has used, in
microseconds. This object deprecates
cpmProcExtRuntime."
::= { cpmProcessExtRevEntry 4 }
cpmProcExtUtil5SecRev OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides a general idea of how busy
a process caused the processor to be over a 5
second period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object
deprecates cpmProcExtUtil5Sec and increases the
value range to (0..100)."
::= { cpmProcessExtRevEntry 5 }
cpmProcExtUtil1MinRev OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides a general idea of how busy
a process caused the processor to be over a 1
minute period. It is determined as a weighted
decaying average of the current idle time over the
longest idle time. Note that this information
should be used as an estimate only. This object
deprecates cpmProcExtUtil1Min and increases the value
range to (0..100)."
::= { cpmProcessExtRevEntry 6 }
cpmProcExtUtil5MinRev OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides a general idea of how busy
a process caused the processor to be over a 5
minute period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object
deprecates cpmProcExtUtil5Min and increases the
value range to (0..100)."
::= { cpmProcessExtRevEntry 7 }
cpmProcExtPriorityRev OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
high(2),
normal(3),
low(4),
notAssigned(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority level at which the process is
running. This object deprecates
cpmProcExtPriority."
::= { cpmProcessExtRevEntry 8 }
cpmProcessType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
posix(2),
ios(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the kind of process in context."
::= { cpmProcessExtRevEntry 9 }
cpmProcessRespawn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether respawn of a process is enabled
or not. If enabled the process in context repawns after
it has crashed/stopped."
::= { cpmProcessExtRevEntry 10 }
cpmProcessRespawnCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of times the process has
respawned/restarted."
::= { cpmProcessExtRevEntry 11 }
cpmProcessRespawnAfterLastPatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of times a process has
restarted after the last patch is applied. This is to
determine the stability of the last patch."
::= { cpmProcessExtRevEntry 12 }
cpmProcessMemoryCore OBJECT-TYPE
SYNTAX INTEGER {
other(1),
mainmem(2),
mainmemSharedmem(3),
mainmemText(4),
mainmemTextSharedmem(5),
sharedmem(6),
sparse(7),
off(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the part of process memory to be
dumped when a process crashes. The process
memory is used for debugging purposes to trace the
root cause of the crash.
sparse - Some operating systems support minimal
dump of process core like register
info, partial stack, partial memory
pages especially for critical process
to facilitate faster process restart."
::= { cpmProcessExtRevEntry 13 }
cpmProcessLastRestartUser OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicate the user that has last restarted the
process or has taken running coredump of the process."
::= { cpmProcessExtRevEntry 14 }
cpmProcessTextSegmentSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the text memory of a process and all
its shared objects."
::= { cpmProcessExtRevEntry 15 }
cpmProcessDataSegmentSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the data segment of a process and
all its shared objects."
::= { cpmProcessExtRevEntry 16 }
cpmProcessStackSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of stack memory used by the
process."
::= { cpmProcessExtRevEntry 17 }
cpmProcessDynamicMemorySize OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of dynamic memory being used
by the process."
::= { cpmProcessExtRevEntry 18 }
cpmProcExtMemAllocatedRevOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmProcExtMemAllocatedRev. This object needs
to be supported only when the value of
cpmProcExtMemAllocatedRev exceeds 32-bit,
otherwise this object value would be set to 0."
::= { cpmProcessExtRevEntry 19 }
cpmProcExtHCMemAllocatedRev OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all the dynamically allocated memory that this
process has received from the system. This includes memory
that may have been returned. This object is a 64-bit version
of cpmProcExtMemAllocatedRev."
::= { cpmProcessExtRevEntry 20 }
cpmProcExtMemFreedRevOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmProcExtMemFreedRev. This object needs to
be supported only when the value of
cpmProcExtMemFreedRev exceeds 32-bit,otherwise
this object value would be set to 0."
::= { cpmProcessExtRevEntry 21 }
cpmProcExtHCMemFreedRev OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all memory that this process has returned to the
system. This object is a 64-bit version of
cpmProcExtMemFreedRev."
::= { cpmProcessExtRevEntry 22 }
cpmProcessTextSegmentSizeOvrflw OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmProcessTextSegmentSize. This object needs
to be supported only when the value of
cpmProcessTextSegmentSize exceeds 32-bit,
otherwise this object value would be set to 0."
::= { cpmProcessExtRevEntry 23 }
cpmProcessHCTextSegmentSize OBJECT-TYPE
SYNTAX Unsigned64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the text memory of a process and all
its shared objects. This object is a 64-bit version
of cpmProcessTextSegmentSize."
::= { cpmProcessExtRevEntry 24 }
cpmProcessDataSegmentSizeOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmProcessDataSegmentSize. This object needs
to be supported only when the value of
cpmProcessDataSegmentSize exceeds 32-bit,
otherwise this object value would be set to 0."
::= { cpmProcessExtRevEntry 25 }
cpmProcessHCDataSegmentSize OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the data segment of a process and
all its shared objects.. This object is a 64-bit
version of cpmProcessDataSegmentSize."
::= { cpmProcessExtRevEntry 26 }
cpmProcessStackSizeOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of cpmProcessStackSize.
This object needs to be supported only when the value of
cpmProcessStackSize exceeds 32-bit, otherwise this object value
would be set to 0."
::= { cpmProcessExtRevEntry 27 }
cpmProcessHCStackSize OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of stack memory used by the process.
This object is a 64-bit version of cpmProcessStackSize."
::= { cpmProcessExtRevEntry 28 }
cpmProcessDynamicMemorySizeOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmProcessDynamicMemorySize. This object needs
to be supported only when the value of
cpmProcessDynamicMemorySize exceeds 32-bit,
otherwise this object value would be set to 0."
::= { cpmProcessExtRevEntry 29 }
cpmProcessHCDynamicMemorySize OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of dynamic memory being used
by the process. This object is a 64-bit version of
cpmProcessDynamicMemorySize."
::= { cpmProcessExtRevEntry 30 }
-- Threshold Table allows the CPU threshold configurations.
-- When the configured threshold is reached a NMS will be notified
-- with this event.
cpmCPUThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmCPUThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the
thresholding values for CPU , configured by the user."
::= { cpmProcess 4 }
cpmCPUThresholdEntry OBJECT-TYPE
SYNTAX CpmCPUThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about
CPU thresholding parameters. cpmCPUTotalIndex
identifies the CPU (or group of CPUs) for which this
configuration applies."
INDEX {
cpmCPUTotalIndex,
cpmCPUThresholdClass
}
::= { cpmCPUThresholdTable 1 }
CpmCPUThresholdEntry ::= SEQUENCE {
cpmCPUThresholdClass INTEGER,
cpmCPURisingThresholdValue Unsigned32,
cpmCPURisingThresholdPeriod Unsigned32,
cpmCPUFallingThresholdValue Unsigned32,
cpmCPUFallingThresholdPeriod Unsigned32,
cpmCPUThresholdEntryStatus RowStatus
}
cpmCPUThresholdClass OBJECT-TYPE
SYNTAX INTEGER {
total(1),
interrupt(2),
process(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Value of this object indicates the type of
utilization, which is monitored. The total(1) indicates
the total CPU utilization, interrupt(2) indicates the
the CPU utilization in interrupt context and process(3)
indicates the CPU utilization in the process level
execution context."
::= { cpmCPUThresholdEntry 1 }
cpmCPURisingThresholdValue OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage rising threshold value configured by
the user. The value indicates,
if the percentage CPU utilization is equal to or above
this value for cpmCPURisingThresholdPeriod duration
then send a cpmCPURisingThreshold notification to
the NMS."
::= { cpmCPUThresholdEntry 2 }
cpmCPURisingThresholdPeriod OBJECT-TYPE
SYNTAX Unsigned32 (5..4294967295)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an observation interval.
The value of this object indicates that
the CPU utilization should be above
cpmCPURisingThresholdValue for this duration to send a
cpmCPURisingThreshold notification to the NMS."
DEFVAL { 5 }
::= { cpmCPUThresholdEntry 3 }
cpmCPUFallingThresholdValue OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage falling threshold value configured by
the user. The value indicates, if the percentage
CPU utilization is equal to or below this value for
cpmCPUFallingThresholdPeriod duration
then send a cpmCPUFallingThreshold notification
to the NMS."
::= { cpmCPUThresholdEntry 4 }
cpmCPUFallingThresholdPeriod OBJECT-TYPE
SYNTAX Unsigned32 (5..4294967295)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an observation interval. The value of this
object indicates that CPU utilization should be below
cpmCPUFallingThresholdValue for this duration to send a
cpmCPURisingThreshold notification to the NMS."
DEFVAL { 5 }
::= { cpmCPUThresholdEntry 5 }
cpmCPUThresholdEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { cpmCPUThresholdEntry 6 }
cpmCPUHistoryThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user configured value of this object gives
the minimum percent CPU utilization of a process
in the last cpmCPUMonInterval duration required to be a
member of history table. When this object is changed
the new value will have effect in the next interval."
::= { cpmCPUHistory 1 }
cpmCPUHistorySize OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value configured by the user which specifies the
number of reports in the history table.
A report contains set of processes which crossed
the cpmCPUHistoryThreshold
in the last cpmCPUMonInterval along with
the time at which this report is
created, total and interrupt CPU utilizations.
When this object is changed
the new value will have effect in the next interval."
::= { cpmCPUHistory 2 }
cpmCPUHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmCPUHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of CPU utilization history entries."
::= { cpmCPUHistory 3 }
cpmCPUHistoryEntry OBJECT-TYPE
SYNTAX CpmCPUHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A historical sample of CPU utilization statistics.
cpmCPUTotalIndex identifies the CPU (or group of CPUs)
for which this history is collected.
When the cpmCPUHistorySize is
reached the least recent entry is lost."
INDEX {
cpmCPUTotalIndex,
cpmCPUHistoryReportId
}
::= { cpmCPUHistoryTable 1 }
CpmCPUHistoryEntry ::= SEQUENCE {
cpmCPUHistoryReportId Unsigned32,
cpmCPUHistoryReportSize Unsigned32,
cpmCPUHistoryTotalUtil Gauge32,
cpmCPUHistoryInterruptUtil Gauge32,
cpmCPUHistoryCreatedTime TimeStamp
}
cpmCPUHistoryReportId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All the entries which are created at the same time
will have same value for this object. When the
configured threshold for being a part of History table
is reached then the qualified processes become the
part of history table. The entries which became the
part of history table at one instant will have
the same value for this object. When this object
reaches the max index value then it will wrap around."
::= { cpmCPUHistoryEntry 1 }
cpmCPUHistoryReportSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of process entries in a report.
This object gives information about how many processes
became a part of history table at one instant."
::= { cpmCPUHistoryEntry 2 }
cpmCPUHistoryTotalUtil OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total percentage of CPU utilization
at cpmCPUHistoryCreated."
::= { cpmCPUHistoryEntry 3 }
cpmCPUHistoryInterruptUtil OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of CPU utilization in the interrupt context
at cpmCPUHistoryCreated."
::= { cpmCPUHistoryEntry 4 }
cpmCPUHistoryCreatedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp with respect to sysUpTime indicating
the time at which this report is created."
::= { cpmCPUHistoryEntry 5 }
cpmThreadTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmThreadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains generic information about
POSIX threads in the device."
::= { cpmThread 1 }
cpmThreadEntry OBJECT-TYPE
SYNTAX CpmThreadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the general statistics
of a POSIX thread."
INDEX {
cpmCPUTotalIndex,
cpmProcessPID,
cpmThreadID
}
::= { cpmThreadTable 1 }
CpmThreadEntry ::= SEQUENCE {
cpmThreadID Unsigned32,
cpmThreadName SnmpAdminString,
cpmThreadPriority Unsigned32,
cpmThreadState INTEGER,
cpmThreadBlockingProcess RowPointer,
cpmThreadCpuUtilization Gauge32,
cpmThreadStackSize Gauge32,
cpmThreadStackSizeOvrflw Gauge32,
cpmThreadHCStackSize CounterBasedGauge64
}
cpmThreadID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the thread ID. ThreadID is
Unique per process."
::= { cpmThreadEntry 1 }
cpmThreadName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the name of the thread.
Thread names need not be unique. Hence statistics
should be analyzed against thread ID."
::= { cpmThreadEntry 2 }
cpmThreadPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the priority of a POSIX thread.
The higher the number, the higher the priority of the
thread over other threads."
::= { cpmThreadEntry 3 }
cpmThreadState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
dead(2),
running(3),
ready(4),
stopped(5),
send(6),
receive(7),
reply(8),
stack(9),
waitpage(10),
sigsuspend(11),
sigwaitinfo(12),
nanosleep(13),
mutex(14),
condvar(15),
join(16),
intr(17),
sem(18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current state of a thread.
Running state means that the thread is actively
consumig CPU. All the other states are just waiting
states. The valid states are:
other - Any other state apart from the listed
ones.
dead - Kernel is waiting to release the
thread's resources.
running - Actively running on a CPU.
ready - Not running on a CPU, but is ready to
run (one or more higher or equal
priority threads are running).
stopped - Suspended (SIGSTOP signal).
send - Waiting for a server to receive
a message.
receive - Waiting for a client to send a message.
reply - Waiting for a server to reply to a
message.
stack - Waiting for more stack to be allocated.
waitpage - Waiting for process manager to
resolve a fault on a page.
sigsuspend - Suspended for a signal.
sigwaitinfo - Waiting for a signal.
nanosleep - Sleeping for a period of time.
mutex - Waiting to acquire a mutex
condvar - Waiting for a condition variable to be
signalled.
join - Waiting for the completion of another
thread.
intr - Waiting for an interrupt.
sem - Waiting to acquire a semaphore."
::= { cpmThreadEntry 4 }
cpmThreadBlockingProcess OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the process on which the
current thread is blocked on. This points to the
cpmProcessTable of the process on which the thread
in context is blocked. This is valid only to threads
which are either in send/reply states. For the
rest of the threads it is returned as 0.0"
::= { cpmThreadEntry 5 }
cpmThreadCpuUtilization OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides a general idea on how busy
the thread in context caused the processor to be."
::= { cpmThreadEntry 6 }
cpmThreadStackSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the stack size allocated to
the thread in context."
::= { cpmThreadEntry 7 }
cpmThreadStackSizeOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of cpmThreadStackSize.
This object needs to be supported only when the value of
cpmThreadStackSize exceeds 32-bit, otherwise this object value
would be set to 0."
::= { cpmThreadEntry 8 }
cpmThreadHCStackSize OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the stack size allocated to the
thread in context. This object is a 64-bit version of
cpmThreadStackSize."
::= { cpmThreadEntry 9 }
cpmVirtualProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmVirtualProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about virtual
processes in a virtual machine."
::= { cpmVirtualProcess 1 }
cpmVirtualProcessEntry OBJECT-TYPE
SYNTAX CpmVirtualProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the general statistics of a
virtual process in a virtual machine."
INDEX {
cpmCPUTotalIndex,
cpmProcessPID,
cpmVirtualProcessID
}
::= { cpmVirtualProcessTable 1 }
CpmVirtualProcessEntry ::= SEQUENCE {
cpmVirtualProcessID Unsigned32,
cpmVirtualProcessName SnmpAdminString,
cpmVirtualProcessUtil5Sec Gauge32,
cpmVirtualProcessUtil1Min Gauge32,
cpmVirtualProcessUtil5Min Gauge32,
cpmVirtualProcessMemAllocated Gauge32,
cpmVirtualProcessMemFreed Gauge32,
cpmVirtualProcessInvokeCount Counter32,
cpmVirtualProcessRuntime Counter32,
cpmVirtualProcessMemAllocatedOvrflw Gauge32,
cpmVirtualProcessHCMemAllocated CounterBasedGauge64,
cpmVirtualProcessMemFreedOvrflw Gauge32,
cpmVirtualProcessHCMemFreed CounterBasedGauge64
}
cpmVirtualProcessID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the process ID of a virtual
process. PID is unique only inside one address space.
Virtual process PID should be considered along with
Parent process cpmProcessPID."
::= { cpmVirtualProcessEntry 1 }
cpmVirtualProcessName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of a virtual process.
If the name is longer than 32 characters, it will be
truncated to the first 31 characters, and a `*' will be
appended as the last character to imply this is a
truncated process name."
::= { cpmVirtualProcessEntry 2 }
cpmVirtualProcessUtil5Sec OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates an estimated CPU utilization by
a virtual process over the last 5 seconds."
::= { cpmVirtualProcessEntry 3 }
cpmVirtualProcessUtil1Min OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates an estimated CPU utilization by
a virtual process over the last one minute."
::= { cpmVirtualProcessEntry 4 }
cpmVirtualProcessUtil5Min OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates an estimated CPU utilization by
a virtual process over the last 5 minutes."
::= { cpmVirtualProcessEntry 5 }
cpmVirtualProcessMemAllocated OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the memory allocated by the
virtual process inside the address space of a
process running on Native OS."
::= { cpmVirtualProcessEntry 6 }
cpmVirtualProcessMemFreed OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the memory freed by the virtual
process inside the address space of a process running
on Native OS."
::= { cpmVirtualProcessEntry 7 }
cpmVirtualProcessInvokeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a virtual process is invoked."
::= { cpmVirtualProcessEntry 8 }
cpmVirtualProcessRuntime OBJECT-TYPE
SYNTAX Counter32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of CPU time a virtual process has used in
microseconds."
::= { cpmVirtualProcessEntry 9 }
cpmVirtualProcessMemAllocatedOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmVirtualProcessMemAllocated. This object
needs to be supported only when the value of
cpmVirtualProcessMemAllocated exceeds 32-bit,
otherwise this object value would be set to 0."
::= { cpmVirtualProcessEntry 10 }
cpmVirtualProcessHCMemAllocated OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the memory allocated by the
virtual process inside the address space of a process
running on Native OS. This object is a 64-bit version
of cpmVirtualProcessMemAllocated."
::= { cpmVirtualProcessEntry 11 }
cpmVirtualProcessMemFreedOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
cpmVirtualProcessMemFreed. This object needs
to be supported only when the value of
cpmVirtualProcessMemFreed exceeds 32-bit,
otherwise this object value would be set to 0."
::= { cpmVirtualProcessEntry 12 }
cpmVirtualProcessHCMemFreed OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the memory freed by the virtual process
inside the address space of a process running on Native OS.This
object is a 64-bit version of cpmVirtualProcessMemAllocated."
::= { cpmVirtualProcessEntry 13 }
-- History table contains the statistics for the processes
-- qualified to be a part of history table.
-- The statistics are the CPU utilization of processes
-- for past 5 second period.
cpmCPUProcessHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmCPUProcessHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of process history entries. This table contains
CPU utilization of processes which crossed the
cpmCPUHistoryThreshold."
::= { cpmCPUHistory 4 }
cpmCPUProcessHistoryEntry OBJECT-TYPE
SYNTAX CpmCPUProcessHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A historical sample of process utilization
statistics. The entries in this table will have
corresponding entires in the cpmCPUHistoryTable.
The entries in this table get deleted when the entry
associated with this entry in the cpmCPUHistoryTable
gets deleted."
INDEX {
cpmCPUTotalIndex,
cpmCPUHistoryReportId,
cpmCPUProcessHistoryIndex
}
::= { cpmCPUProcessHistoryTable 1 }
CpmCPUProcessHistoryEntry ::= SEQUENCE {
cpmCPUProcessHistoryIndex Unsigned32,
cpmCPUHistoryProcId Unsigned32,
cpmCPUHistoryProcName DisplayString,
cpmCPUHistoryProcCreated TimeStamp,
cpmCPUHistoryProcUtil Gauge32
}
cpmCPUProcessHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in
the cmpCPUProcessHistory table among those in the
same report. This index is between 1 to N,
where N is the cpmCPUHistoryReportSize."
::= { cpmCPUProcessHistoryEntry 1 }
cpmCPUHistoryProcId OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process Id associated with this entry."
::= { cpmCPUProcessHistoryEntry 2 }
cpmCPUHistoryProcName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process name associated with this entry."
::= { cpmCPUProcessHistoryEntry 3 }
cpmCPUHistoryProcCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the process was created. The process ID
and the time when the process was created, uniquely
identifies a process."
::= { cpmCPUProcessHistoryEntry 4 }
cpmCPUHistoryProcUtil OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage CPU utilization of a process at
cpmCPUHistoryCreatedTime."
::= { cpmCPUProcessHistoryEntry 5 }
-- notifications
ciscoProcessMIBNotifPrefix OBJECT IDENTIFIER
::= { ciscoProcessMIB 2 }
ciscoProcessMIBNotifs OBJECT IDENTIFIER
::= { ciscoProcessMIBNotifPrefix 0 }
cpmCPURisingThreshold NOTIFICATION-TYPE
OBJECTS {
cpmCPURisingThresholdValue,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue,
cpmProcExtUtil5SecRev,
cpmProcessTimeCreated
}
STATUS current
DESCRIPTION
"A cpmCPURisingThreshold notification is sent
when configured rising CPU utilization threshold
(cpmCPURisingThresholdValue) is reached and
CPU utilization remained above the threshold
for configured interval(cpmCPURisingThresholdPeriod)
and such a notification is requested.
The cpmProcExtUtil5SecRev and cpmProcessTimeCreated
objects can be repeated multiple times
in a notification indicating the top users of CPU."
::= { ciscoProcessMIBNotifs 1 }
cpmCPUFallingThreshold NOTIFICATION-TYPE
OBJECTS {
cpmCPUFallingThresholdValue,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue
}
STATUS current
DESCRIPTION
"A cpmCPUFallingThresholdTrap is sent when the
configured falling threshold
(cpmCPURisingThresholdValue)
is reached and CPU utilization remained under
threshold for configured
interval (cpmCPUFallingThresholdPeriod)
and such a notification is requested."
::= { ciscoProcessMIBNotifs 2 }
-- conformance information
ciscoProcessMIBConformance OBJECT IDENTIFIER
::= { ciscoProcessMIB 3 }
cpmCompliances OBJECT IDENTIFIER
::= { ciscoProcessMIBConformance 1 }
cpmGroups OBJECT IDENTIFIER
::= { ciscoProcessMIBConformance 2 }
cProcessMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This is deprecated and new
compliance cProcessMIBComplianceRev is added."
MODULE -- this module
MANDATORY-GROUPS {
cpmCPUTotalGroup,
cpmProcessGroup
}
GROUP cpmProcessExtGroup
DESCRIPTION
"The cpmProcessExtGroup is optional for all entities."
OBJECT cpmProcExtPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cpmCompliances 1 }
cProcessMIBComplianceRev MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBCompliance."
MODULE -- this module
MANDATORY-GROUPS {
cpmCPUTotalGroupRev,
cpmProcessGroupRev
}
GROUP cpmProcessExtGroupRev
DESCRIPTION
"The cpmProcessExtGroupRev is optional for all
entities. This object is defined after deprecating
cpmProcessExtGroup."
::= { cpmCompliances 2 }
cProcessMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev."
MODULE -- this module
MANDATORY-GROUPS {
cpmCPUThresholdGroup,
cpmCPUTotalGroupRev1
}
GROUP cpmCPUHistoryGroup
DESCRIPTION
"The cpmCPUHistoryGroup is optional and gives
the information about process CPU utilization history."
GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION
"The cpmCPUThresholdNotificationGroup is optional and
these traps indicates that
configured threshold is reached."
::= { cpmCompliances 3 }
cProcessMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev1."
MODULE -- this module
MANDATORY-GROUPS { cpmCPUTotalGroupRev1 }
GROUP cpmCPUHistoryGroup
DESCRIPTION
"The cpmCPUHistoryGroup is optional and gives
the information about process CPU utilization history."
GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION
"The cpmCPUThresholdNotificationGroup is optional and
these traps indicates that configured threshold
is reached."
GROUP cpmProcessExtGroupRev
DESCRIPTION
"The cpmProcessExtGroupRev is optional and gives
detailed process monitoring information."
GROUP cpmCPUThresholdGroup
DESCRIPTION
"The cpmCPUThresholdGroup is optional and provides
information on configuring threshold values."
GROUP cpmProcessGroupRev
DESCRIPTION
"The cpmProcessGroupRev is optional and provides common
process monitoring information."
GROUP cpmCPUPosixMemoryGroup
DESCRIPTION
"The cpmCPUPosixMemoryGroup gives information about
CPU wide system memory of POSIX OS.
cpmCPUPosixMemoryGroup is mandatory if the Operating
System of the managed system supports Posix standard
kernel."
GROUP cpmPosixProcessGroup
DESCRIPTION
"The cpmPosixProcessGroup gives information about
POSIX process. cpmPosixProcessGroup is mandatory if
the Operating System of the managed system
supports Posix standard kernel."
GROUP cpmThreadGroup
DESCRIPTION
"The cpmThreadGroup gives information about POSIX
threads. cpmThreadGroup is mandatory if the Operating
System of the managed system supports Posix standard
kernel."
GROUP cpmVirtualProcessGroup
DESCRIPTION
"The cpmVirtualProcessGroup gives information about
virtual process. cpmVirtualProcessGroup is mandatory
Operating System of the managed system supports
Posix standard kernel."
::= { cpmCompliances 4 }
cProcessMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev2."
MODULE -- this module
MANDATORY-GROUPS { cpmCPUTotalGroupRev1 }
GROUP cpmCPUHistoryGroup
DESCRIPTION
"The cpmCPUHistoryGroup is optional and gives
the information about process CPU utilization history."
GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION
"The cpmCPUThresholdNotificationGroup is optional and
these traps indicates that configured threshold
is reached."
GROUP cpmProcessExtGroupRev
DESCRIPTION
"The cpmProcessExtGroupRev is optional and gives
detailed process monitoring information."
GROUP cpmCPUThresholdGroup
DESCRIPTION
"The cpmCPUThresholdGroup is optional and provides
information on configuring threshold values."
GROUP cpmProcessGroupRev
DESCRIPTION
"The cpmProcessGroupRev is optional and provides common
process monitoring information."
GROUP cpmCPUPosixMemoryGroup
DESCRIPTION
"The cpmCPUPosixMemoryGroup gives information about
CPU wide system memory of POSIX OS.
cpmCPUPosixMemoryGroup is mandatory if the Operating
System of the managed system supports Posix standard
kernel."
GROUP cpmPosixProcessGroup
DESCRIPTION
"The cpmPosixProcessGroup gives information about
POSIX process. cpmPosixProcessGroup is mandatory if
the Operating System of the managed system
supports Posix standard kernel."
GROUP cpmThreadGroup
DESCRIPTION
"The cpmThreadGroup gives information about POSIX
threads. cpmThreadGroup is mandatory if the Operating
System of the managed system supports Posix standard
kernel."
GROUP cpmVirtualProcessGroup
DESCRIPTION
"The cpmVirtualProcessGroup gives information about
virtual process. cpmVirtualProcessGroup is mandatory
Operating System of the managed system supports
Posix standard kernel."
GROUP cpmCPUTotalOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmCPUTotalHCGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmProcessExtRevOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmProcessExtRevHCGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmThreadOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmThreadHCGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmVirtualProcessOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
GROUP cpmVirtualProcessHCGroup
DESCRIPTION
"This group is an optional group for the devices which
run on 32-bit operating system."
::= { cpmCompliances 5 }
cProcessMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev3."
MODULE -- this module
MANDATORY-GROUPS { cpmCPUTotalGroupRev1 }
GROUP cpmCPUHistoryGroup
DESCRIPTION
"The cpmCPUHistoryGroup is optional and gives the information
about process CPU utilization history."
GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION
"The cpmCPUThresholdNotificationGroup is optional and these traps
indicates that configured threshold is reached."
GROUP cpmProcessExtGroupRev
DESCRIPTION
"The cpmProcessExtGroupRev is optional and gives detailed process
monitoring information."
GROUP cpmCPUThresholdGroup
DESCRIPTION
"The cpmCPUThresholdGroup is optional and provides information on
configuring threshold values."
GROUP cpmProcessGroupRev
DESCRIPTION
"The cpmProcessGroupRev is optional and provides common process
monitoring information."
GROUP cpmCPUPosixMemoryGroup
DESCRIPTION
"The cpmCPUPosixMemoryGroup gives information about CPU wide
system memory of POSIX OS.
cpmCPUPosixMemoryGroup is mandatory if the Operating System of
the managed system supports Posix standard kernel."
GROUP cpmPosixProcessGroup
DESCRIPTION
"The cpmPosixProcessGroup gives information about POSIX process.
cpmPosixProcessGroup is mandatory if the Operating System of the
managed system supports Posix standard kernel."
GROUP cpmThreadGroup
DESCRIPTION
"The cpmThreadGroup gives information about POSIX threads.
cpmThreadGroup is mandatory if the Operating System of the
managed system supports Posix standard kernel."
GROUP cpmVirtualProcessGroup
DESCRIPTION
"The cpmVirtualProcessGroup gives information about virtual
process.cpmVirtualProcessGroup is mandatory Operating System of
the managed system supports Posix standard kernel."
GROUP cpmCPUTotalOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmCPUTotalHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmProcessExtRevOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmProcessExtRevHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmThreadOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmThreadHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmVirtualProcessOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmVirtualProcessHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmCPULoadAvgGroup
DESCRIPTION
"The cpmCPULoadAvgGroup is optional and provides CPU load
average information.This Group is valid only for the device
which supports it."
::= { cpmCompliances 6 }
cProcessMIBComplianceRev5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev4"
MODULE -- this module
MANDATORY-GROUPS { cpmCPUTotalGroupRev1 }
GROUP cpmCoreGroup
DESCRIPTION
"The cpmCoreGroup is optoinal and gives per-core CPU utilization."
GROUP cpmCPUHistoryGroup
DESCRIPTION
"The cpmCPUHistoryGroup is optional and gives the information
about process CPU utilization history."
GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION
"The cpmCPUThresholdNotificationGroup is optional and these
traps indicates that configured threshold is reached."
GROUP cpmProcessExtGroupRev
DESCRIPTION
"The cpmProcessExtGroupRev is optional and gives detailed process
monitoring information."
GROUP cpmCPUThresholdGroup
DESCRIPTION
"The cpmCPUThresholdGroup is optional and provides information
on configuring threshold values."
GROUP cpmProcessGroupRev
DESCRIPTION
"The cpmProcessGroupRev is optional and provides common process
monitoring information."
GROUP cpmCPUPosixMemoryGroup
DESCRIPTION
"The cpmCPUPosixMemoryGroup gives information about CPU wide
system memory of POSIX OS.
cpmCPUPosixMemoryGroup is mandatory if the Operating System of
the managed system supports Posix standard kernel."
GROUP cpmPosixProcessGroup
DESCRIPTION
"The cpmPosixProcessGroup gives information about POSIX process.
cpmPosixProcessGroup is mandatory if the Operating System
of the managed system supports Posix standard kernel."
GROUP cpmThreadGroup
DESCRIPTION
"The cpmThreadGroup gives information about POSIX threads.
cpmThreadGroup is mandatory if the Operating System of the
managed system supports Posix standard kernel."
GROUP cpmVirtualProcessGroup
DESCRIPTION
"The cpmVirtualProcessGroup gives information about virtual
process.cpmVirtualProcessGroup is mandatory Operating System of
the managed system supports Posix standard kernel."
GROUP cpmCPUTotalOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system."
GROUP cpmCPUTotalHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmProcessExtRevOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmProcessExtRevHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmThreadOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmThreadHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmVirtualProcessOverflowGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system."
GROUP cpmVirtualProcessHCGroup
DESCRIPTION
"This group is an optional group for the devices which run on
32-bit operating system"
GROUP cpmCPULoadAvgGroup
DESCRIPTION
"The cpmCPULoadAvgGroup is optional and provides CPU load
average information.This Group is valid only for the device
which supports it"
GROUP cpmCPUTotalMemoryCommitGroup
DESCRIPTION
"The cpmCPUTotalMemoryCommitGroup is optional and provides system
Committed memory information.This Group is valid only for the
device which supports it."
::= { cpmCompliances 7 }
-- units of conformance
cpmCPUTotalGroup OBJECT-GROUP
OBJECTS {
cpmCPUTotalPhysicalIndex,
cpmCPUTotal5sec,
cpmCPUTotal1min,
cpmCPUTotal5min
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing CPU load monitoring
information. This group is mandatory for all cisco devices.
This group is deprecated since the objects cpmCPUTotal5sec,
cpmCPUTotal1min and cpmCPUTotal5min are
deprecated. A new object cpmCPUTotalGroupRev is
added in place of it."
::= { cpmGroups 1 }
cpmProcessGroup OBJECT-GROUP
OBJECTS {
cpmProcessPID,
cpmProcessName,
cpmProcessuSecs,
cpmProcessTimeCreated
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing common process
monitoring information. This group is mandatory for
all cisco devices. This object is deprecated
by cpmProcessGroupRev."
::= { cpmGroups 2 }
cpmProcessExtGroup OBJECT-GROUP
OBJECTS {
cpmProcExtMemAllocated,
cpmProcExtMemFreed,
cpmProcExtInvoked,
cpmProcExtRuntime,
cpmProcExtUtil5Sec,
cpmProcExtUtil1Min,
cpmProcExtUtil5Min,
cpmProcExtPriority
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing additional and
more detailed process monitoring information. This
group is mandatory for all cisco devices that have
the internal capability to keep this information.
This group is deprecated and new group
cpmProcessExtGroupRev is added."
::= { cpmGroups 3 }
cpmCPUTotalGroupRev OBJECT-GROUP
OBJECTS {
cpmCPUTotalPhysicalIndex,
cpmCPUTotal5secRev,
cpmCPUTotal1minRev,
cpmCPUTotal5minRev
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing CPU load monitoring
information. This group is mandatory for all cisco
devices. This group deprecates cpmCPUTotalGroup.
This group is deprecated since the object
cpmCPUTotal5secRev is deprecated.
A new object cpmCPUTotalGroupRev1 is
added in place of it."
::= { cpmGroups 4 }
cpmProcessExtGroupRev OBJECT-GROUP
OBJECTS {
cpmProcExtMemAllocatedRev,
cpmProcExtMemFreedRev,
cpmProcExtInvokedRev,
cpmProcExtRuntimeRev,
cpmProcExtUtil5SecRev,
cpmProcExtUtil1MinRev,
cpmProcExtUtil5MinRev,
cpmProcExtPriorityRev
}
STATUS current
DESCRIPTION
"A collection of objects providing additional and
more detailed process monitoring information. This
group is mandatory for all cisco devices that have
the internal capability to keep this information.
This group is formed after deprecating cpmProcessExtGroup.
cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev,
cpmProcExtInvokedRev, cpmProcExtRuntimeRev,
cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev and
cpmProcExtUtil5MinRev are the new objects added."
::= { cpmGroups 5 }
cpmProcessGroupRev OBJECT-GROUP
OBJECTS {
cpmProcessPID,
cpmProcessName,
cpmProcessAverageUSecs,
cpmProcessTimeCreated
}
STATUS current
DESCRIPTION
"A collection of objects providing common process
monitoring information. This group is mandatory for
all cisco devices. This object deprecates
cpmProcessGroup."
::= { cpmGroups 6 }
cpmCPUTotalGroupRev1 OBJECT-GROUP
OBJECTS {
cpmCPUTotalPhysicalIndex,
cpmCPUTotal1minRev,
cpmCPUTotal5minRev,
cpmCPUMonInterval,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue
}
STATUS current
DESCRIPTION
"A collection of objects providing CPU load monitoring
information. This group is mandatory for all cisco
devices. This group deprecates cpmCPUTotalGroupRev."
::= { cpmGroups 7 }
cpmCPUThresholdGroup OBJECT-GROUP
OBJECTS {
cpmCPURisingThresholdValue,
cpmCPURisingThresholdPeriod,
cpmCPUFallingThresholdValue,
cpmCPUFallingThresholdPeriod,
cpmCPUThresholdEntryStatus
}
STATUS current
DESCRIPTION
"A collection of objects used for configuration
of thresholding."
::= { cpmGroups 8 }
cpmCPUHistoryGroup OBJECT-GROUP
OBJECTS {
cpmCPUHistorySize,
cpmCPUHistoryThreshold,
cpmCPUHistoryTotalUtil,
cpmCPUHistoryInterruptUtil,
cpmCPUHistoryCreatedTime,
cpmCPUHistoryReportSize,
cpmCPUHistoryProcId,
cpmCPUHistoryProcName,
cpmCPUHistoryProcCreated,
cpmCPUHistoryProcUtil
}
STATUS current
DESCRIPTION
"A collection of objects providing information
about CPU utilization history."
::= { cpmGroups 9 }
cpmCPUThresholdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cpmCPURisingThreshold,
cpmCPUFallingThreshold
}
STATUS current
DESCRIPTION
"A group of notifications."
::= { cpmGroups 10 }
cpmCPUPosixMemoryGroup OBJECT-GROUP
OBJECTS {
cpmCPUMemoryUsed,
cpmCPUMemoryFree,
cpmCPUMemoryKernelReserved,
cpmCPUMemoryLowest
}
STATUS current
DESCRIPTION
"A collection of common objects providing
CPU wide System memory information running
POSIX compliant OS."
::= { cpmGroups 11 }
cpmPosixProcessGroup OBJECT-GROUP
OBJECTS {
cpmProcessType,
cpmProcessRespawn,
cpmProcessRespawnCount,
cpmProcessRespawnAfterLastPatch,
cpmProcessMemoryCore,
cpmProcessLastRestartUser,
cpmProcessTextSegmentSize,
cpmProcessDataSegmentSize,
cpmProcessStackSize,
cpmProcessDynamicMemorySize
}
STATUS current
DESCRIPTION
"A collection of common objects providing Process
information on devices running POSIX compliant OS."
::= { cpmGroups 12 }
cpmThreadGroup OBJECT-GROUP
OBJECTS {
cpmThreadName,
cpmThreadPriority,
cpmThreadState,
cpmThreadBlockingProcess,
cpmThreadCpuUtilization,
cpmThreadStackSize
}
STATUS current
DESCRIPTION
"A collection of objects providing thread information
information on devices running POSIX compliant OS."
::= { cpmGroups 13 }
cpmVirtualProcessGroup OBJECT-GROUP
OBJECTS {
cpmVirtualProcessName,
cpmVirtualProcessUtil5Sec,
cpmVirtualProcessUtil1Min,
cpmVirtualProcessUtil5Min,
cpmVirtualProcessMemAllocated,
cpmVirtualProcessMemFreed,
cpmVirtualProcessInvokeCount,
cpmVirtualProcessRuntime
}
STATUS current
DESCRIPTION
"A collection of objects providing virtual process
information on devices that can run virtual machines."
::= { cpmGroups 14 }
cpmCPUTotalOverflowGroup OBJECT-GROUP
OBJECTS {
cpmCPUMemoryUsedOvrflw,
cpmCPUMemoryFreeOvrflw,
cpmCPUMemoryKernelReservedOvrflw,
cpmCPUMemoryLowestOvrflw
}
STATUS current
DESCRIPTION
"A collection of Overflow (Ovrflw) objects providing CPU load
monitoring information."
::= { cpmGroups 15 }
cpmCPUTotalHCGroup OBJECT-GROUP
OBJECTS {
cpmCPUMemoryHCUsed,
cpmCPUMemoryHCFree,
cpmCPUMemoryHCKernelReserved,
cpmCPUMemoryHCLowest
}
STATUS current
DESCRIPTION
"A collection of High Capacity (HC) objects providing CPU
load monitoring information."
::= { cpmGroups 16 }
cpmProcessExtRevOverflowGroup OBJECT-GROUP
OBJECTS {
cpmProcExtMemAllocatedRevOvrflw,
cpmProcExtMemFreedRevOvrflw,
cpmProcessTextSegmentSizeOvrflw,
cpmProcessDataSegmentSizeOvrflw,
cpmProcessStackSizeOvrflw,
cpmProcessDynamicMemorySizeOvrflw
}
STATUS current
DESCRIPTION
"A collection of Overflow objects providing additional
and more detailed process monitoring information."
::= { cpmGroups 17 }
cpmProcessExtRevHCGroup OBJECT-GROUP
OBJECTS {
cpmProcExtHCMemAllocatedRev,
cpmProcExtHCMemFreedRev,
cpmProcessHCTextSegmentSize,
cpmProcessHCDataSegmentSize,
cpmProcessHCStackSize,
cpmProcessHCDynamicMemorySize
}
STATUS current
DESCRIPTION
"A collection of High Capacity objects providing
additional and more detailed process monitoring
information."
::= { cpmGroups 18 }
cpmThreadOverflowGroup OBJECT-GROUP
OBJECTS { cpmThreadStackSizeOvrflw }
STATUS current
DESCRIPTION
"A collection of Overflow objects providing thread
information on devices running POSIX compliant OS."
::= { cpmGroups 19 }
cpmThreadHCGroup OBJECT-GROUP
OBJECTS { cpmThreadHCStackSize }
STATUS current
DESCRIPTION
"A collection of High Capacity objects providing thread
information on devices running POSIX compliant OS."
::= { cpmGroups 20 }
cpmVirtualProcessOverflowGroup OBJECT-GROUP
OBJECTS {
cpmVirtualProcessMemAllocatedOvrflw,
cpmVirtualProcessMemFreedOvrflw
}
STATUS current
DESCRIPTION
"A collection of Overflow objects providing virtual process
information on devices that can run virtual machines."
::= { cpmGroups 21 }
cpmVirtualProcessHCGroup OBJECT-GROUP
OBJECTS {
cpmVirtualProcessHCMemAllocated,
cpmVirtualProcessHCMemFreed
}
STATUS current
DESCRIPTION
"A collection of High Capacity objects providing virtual process
information on devices that can run virtual machines."
::= { cpmGroups 22 }
cpmCPULoadAvgGroup OBJECT-GROUP
OBJECTS {
cpmCPULoadAvg1min,
cpmCPULoadAvg5min,
cpmCPULoadAvg15min
}
STATUS current
DESCRIPTION
"A collection of objects providing CPU load average
information"
::= { cpmGroups 23 }
cpmCPUTotalMemoryCommitGroup OBJECT-GROUP
OBJECTS {
cpmCPUMemoryCommitted,
cpmCPUMemoryCommittedOvrflw,
cpmCPUMemoryHCCommitted
}
STATUS current
DESCRIPTION
"A collection of objects providing CPU system Committed memory
information."
::= { cpmGroups 24 }
cpmCoreGroup OBJECT-GROUP
OBJECTS {
cpmCorePhysicalIndex,
cpmCore5sec,
cpmCore1min,
cpmCore5min,
cpmCoreLoadAvg1min,
cpmCoreLoadAvg5min,
cpmCoreLoadAvg15min
}
STATUS current
DESCRIPTION
"A collection of objects providing per-Core CPU utilization."
::= { cpmGroups 25 }
END
Reference in New Issue View Git Blame Copy Permalink