david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/cisco/CISCOSB-BRIDGE-SECURITY
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

1178 lines
37 KiB
Plaintext
Raw Blame History

CISCOSB-BRIDGE-SECURITY DEFINITIONS ::= BEGIN
-- Version: 7.43
-- Date: 02-Apr-2006
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, IpAddress, Counter32 FROM SNMPv2-SMI
InterfaceIndex, ifIndex FROM IF-MIB
RowStatus, TEXTUAL-CONVENTION, MacAddress,
DisplayString, TruthValue FROM SNMPv2-TC
VlanId FROM Q-BRIDGE-MIB
switch001 FROM CISCOSB-MIB;
rlBridgeSecurity MODULE-IDENTITY
LAST-UPDATED "200604020001Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for DHCP Snoop, ARP Inspection
and Ip source Guard features."
::= { switch001 112}
rlIpDhcpSnoop OBJECT IDENTIFIER ::= { rlBridgeSecurity 1}
rlIpSourceGuard OBJECT IDENTIFIER ::= { rlBridgeSecurity 2}
rlIpArpInspect OBJECT IDENTIFIER ::= { rlBridgeSecurity 3}
rlProtocolFiltering OBJECT IDENTIFIER ::= { rlBridgeSecurity 4}
rlIpDhcpOpt82 OBJECT IDENTIFIER ::= { rlBridgeSecurity 5}
--
-- DHCP Snoop
--
rlIpDhcpSnoopMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpDhcpSnoop 1 }
rlIpDhcpSnoopEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies a system DHCP Snoop enable state."
::= { rlIpDhcpSnoop 2 }
rlIpDhcpSnoopFileEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies a system DHCP Snoop file enable state."
::= { rlIpDhcpSnoop 3 }
rlIpDhcpSnoopClearAction OBJECT-TYPE
SYNTAX INTEGER {
noAction(1), -- for get only
clearNow(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to clear DHCP Snoop Table."
::= { rlIpDhcpSnoop 4 }
rlIpDhcpSnoopFileUpdateTime OBJECT-TYPE
SYNTAX INTEGER(600..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures in seconds the period of time between file updates.
The valid range is 600 - 86400."
::= { rlIpDhcpSnoop 5 }
rlIpDhcpSnoopVerifyMacAddress OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures on an un-trusted port whether the source MAC address in a DHCP packet matches
the client hardware address."
::= { rlIpDhcpSnoop 6 }
rlIpDhcpSnoopCurrentEntiresNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contain the current number of DHCP snooping entries for all types."
::= { rlIpDhcpSnoop 7 }
rlIpDhcpOpt82InsertionEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies a DHCP option 82 insertion enable state."
::= { rlIpDhcpSnoop 8 }
rlIpDhcpOpt82RxOnUntrustedEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies a DHCP option 82 receive on untrusted port enable state."
::= { rlIpDhcpSnoop 9 }
--
-- Dhcp Snoop Static table
--
rlIpDhcpSnoopStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpSnoopStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table specifies all DHCP Snoop Static (configured by user) entries.
The entry contains a local IP address of the DHCP client, a Port interface to which a DHCP client is connected to the switch."
::= { rlIpDhcpSnoop 10 }
rlIpDhcpSnoopStaticEntry OBJECT-TYPE
SYNTAX RlIpDhcpSnoopStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {rlIpDhcpSnoopStaticVLANTag,
rlIpDhcpSnoopStaticMACAddress}
::= { rlIpDhcpSnoopStaticTable 1 }
RlIpDhcpSnoopStaticEntry ::= SEQUENCE {
rlIpDhcpSnoopStaticVLANTag VlanId,
rlIpDhcpSnoopStaticMACAddress MacAddress,
rlIpDhcpSnoopStaticIPAddress IpAddress,
rlIpDhcpSnoopStaticPortInterface InterfaceIndex,
rlIpDhcpSnoopStaticRowStatus RowStatus
}
rlIpDhcpSnoopStaticVLANTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snoop Static entry vlan tag."
::= { rlIpDhcpSnoopStaticEntry 1 }
rlIpDhcpSnoopStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snoop Static entry mac address"
::= { rlIpDhcpSnoopStaticEntry 2 }
rlIpDhcpSnoopStaticIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A DHCP Snoop Static entry IP address."
::= { rlIpDhcpSnoopStaticEntry 3 }
rlIpDhcpSnoopStaticPortInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A DHCP Snoop Static entry Port interface."
::= { rlIpDhcpSnoopStaticEntry 4 }
rlIpDhcpSnoopStaticRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A status can be destroy, active or createAndGo"
::= { rlIpDhcpSnoopStaticEntry 5 }
--
-- Dhcp Snoop table
--
RlIpDhcpSnoopType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ip Dhcp Snoop entry type."
SYNTAX INTEGER {
learnedByProtocol(1),
deletedByTimeout(2),
static(3)
}
rlIpDhcpSnoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpSnoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCP Snoop entry. Use to add/delete a dynamic entries and to view all entries (dynamic and static)"
::= { rlIpDhcpSnoop 11 }
rlIpDhcpSnoopEntry OBJECT-TYPE
SYNTAX RlIpDhcpSnoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {rlIpDhcpSnoopVLANTag,
rlIpDhcpSnoopMACAddress}
::= { rlIpDhcpSnoopTable 1 }
RlIpDhcpSnoopEntry ::= SEQUENCE {
rlIpDhcpSnoopVLANTag VlanId,
rlIpDhcpSnoopMACAddress MacAddress,
rlIpDhcpSnoopType RlIpDhcpSnoopType,
rlIpDhcpSnoopLeaseTime Unsigned32,
rlIpDhcpSnoopIPAddress IpAddress,
rlIpDhcpSnoopPortInterface InterfaceIndex,
rlIpDhcpSnoopRowStatus RowStatus
}
rlIpDhcpSnoopVLANTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snoop entry vlan tag."
::= { rlIpDhcpSnoopEntry 1 }
rlIpDhcpSnoopMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snoop entry mac address"
::= { rlIpDhcpSnoopEntry 2 }
rlIpDhcpSnoopType OBJECT-TYPE
SYNTAX RlIpDhcpSnoopType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A DHCP Snoop entry type: static or dynamic."
::= { rlIpDhcpSnoopEntry 3 }
rlIpDhcpSnoopLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A DHCP Snoop lease time. For static entry the lease time is 0xFFFFFFFF"
::= { rlIpDhcpSnoopEntry 4 }
rlIpDhcpSnoopIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the DHCP client referred to in this table entry."
::= { rlIpDhcpSnoopEntry 5 }
rlIpDhcpSnoopPortInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies the port Interface ifindex, which connected to DHCP client identified with the entry."
::= { rlIpDhcpSnoopEntry 6 }
rlIpDhcpSnoopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. A valid status is CreateandGo or Delete."
::= { rlIpDhcpSnoopEntry 7 }
--
-- Dhcp Snoop Enable VLAN Table
--
rlIpDhcpSnoopEnableVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpSnoopEnableVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An Ip Dhcp Snooping enabled VLAN table."
::= { rlIpDhcpSnoop 12 }
rlIpDhcpSnoopEnableVlanEntry OBJECT-TYPE
SYNTAX RlIpDhcpSnoopEnableVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An Ip Dhcp Snooping enabled VLAN entry."
INDEX {rlIpDhcpSnoopEnableVlanTag}
::= { rlIpDhcpSnoopEnableVlanTable 1 }
RlIpDhcpSnoopEnableVlanEntry ::= SEQUENCE {
rlIpDhcpSnoopEnableVlanTag VlanId,
rlIpDhcpSnoopEnableVlanRowStatus RowStatus
}
rlIpDhcpSnoopEnableVlanTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snoop entry vlan tag."
::= { rlIpDhcpSnoopEnableVlanEntry 1 }
rlIpDhcpSnoopEnableVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. A valid status is CreateandGo and Delete."
::= { rlIpDhcpSnoopEnableVlanEntry 2 }
--
-- Dhcp Snoop Trusted ports Table
--
rlIpDhcpSnoopTrustedPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpSnoopTrustedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snoop Trusted ports entry. The entry created when port is configured as trusted."
::= { rlIpDhcpSnoop 13 }
rlIpDhcpSnoopTrustedPortEntry OBJECT-TYPE
SYNTAX RlIpDhcpSnoopTrustedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {ifIndex}
::= { rlIpDhcpSnoopTrustedPortTable 1 }
RlIpDhcpSnoopTrustedPortEntry ::= SEQUENCE {
rlIpDhcpSnoopTrustedPortRowStatus RowStatus
}
rlIpDhcpSnoopTrustedPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. A valid status is CreateandGo or Delete."
::= { rlIpDhcpSnoopTrustedPortEntry 2 }
--
-- IP Source Guard
--
rlIpSourceGuardMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpSourceGuard 1 }
rlIpSourceGuardEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"FALSE - There is no Ip Source Guard in the system.
TRUE - Ip Source Guard is enabled on system."
::= { rlIpSourceGuard 2 }
rlIpSourceGuardRetryToInsert OBJECT-TYPE
SYNTAX INTEGER {
noAction(0), -- for get only
retryToInsertNow(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When setted to retryToInsertNow all IP Source Guard inactive entries
due to resource problem reinserted in the Policy.
On get always return noAction."
::= { rlIpSourceGuard 3 }
rlIpSourceGuardRetryTime OBJECT-TYPE
SYNTAX INTEGER (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures in seconds the period of time the application retries to
insert inactive by resource problem rules. The actual range is 10-600.
0 used to sign that the timer is not active."
::= { rlIpSourceGuard 4 }
--
-- IP Source Guard Ports table
--
rlIpSourceGuardPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpSourceGuardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP Source Guard ports entry. The entry created when IP Source Guard
enabled on port."
::= { rlIpSourceGuard 5 }
rlIpSourceGuardPortEntry OBJECT-TYPE
SYNTAX RlIpSourceGuardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {ifIndex}
::= { rlIpSourceGuardPortTable 1 }
RlIpSourceGuardPortEntry ::= SEQUENCE {
rlIpSourceGuardPortRowStatus RowStatus
}
rlIpSourceGuardPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. A valid status is CreateAndGo or Delete."
::= { rlIpSourceGuardPortEntry 2 }
--
-- IP Source Guard table
--
RlIpSourceGuardType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ip IP Source Guard entry type."
SYNTAX INTEGER {
dynamic(1),
static(2)
}
RlIpSourceGuardStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ip IP Source Guard entry status."
SYNTAX INTEGER {
active(1),
inactive(2)
}
RlIpSourceGuardFailReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ip IP Source Guard entry reason."
SYNTAX INTEGER {
noProblem(1),
noResource(2),
noSnoopVlan(3),
trustPort(4)
}
rlIpSourceGuardTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpSourceGuardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP Source Guard entry. Use to view all entries (dynamic and static)"
::= { rlIpSourceGuard 6 }
rlIpSourceGuardEntry OBJECT-TYPE
SYNTAX RlIpSourceGuardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {ifIndex,
rlIpSourceGuardIPAddress,
rlIpSourceGuardVLANTag}
::= { rlIpSourceGuardTable 1 }
RlIpSourceGuardEntry ::= SEQUENCE {
rlIpSourceGuardIPAddress IpAddress,
rlIpSourceGuardVLANTag VlanId,
rlIpSourceGuardMACAddress MacAddress,
rlIpSourceGuardType RlIpSourceGuardType,
rlIpSourceGuardStatus RlIpSourceGuardStatus,
rlIpSourceGuardFailReason RlIpSourceGuardFailReason
}
rlIpSourceGuardIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the Ip Source Guard entry."
::= { rlIpSourceGuardEntry 1 }
rlIpSourceGuardVLANTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Ip Source Guard entry vlan tag."
::= { rlIpSourceGuardEntry 2 }
rlIpSourceGuardMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Ip Source Guard entry mac address"
::= { rlIpSourceGuardEntry 3 }
rlIpSourceGuardType OBJECT-TYPE
SYNTAX RlIpSourceGuardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Ip Source Guard entry type: static or dynamic."
::= { rlIpSourceGuardEntry 4 }
rlIpSourceGuardStatus OBJECT-TYPE
SYNTAX RlIpSourceGuardStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the status of Ip Source Guard entry."
::= { rlIpSourceGuardEntry 5 }
rlIpSourceGuardFailReason OBJECT-TYPE
SYNTAX RlIpSourceGuardFailReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the reason for in-activity of Ip Source Guard entry."
::= { rlIpSourceGuardEntry 6 }
--
-- IP Source Guard Permitted rules counter table
--
rlIpSourceGuardPermittedRuleCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpSourceGuardPermittedRuleCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes, per vlan, the IP Source Guard permitted rules counters."
::= { rlIpSourceGuard 7 }
rlIpSourceGuardPermittedRuleCounterEntry OBJECT-TYPE
SYNTAX RlIpSourceGuardPermittedRuleCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {rlIpSourceGuardPermittedRuleCounterVLANTag}
::= { rlIpSourceGuardPermittedRuleCounterTable 1 }
RlIpSourceGuardPermittedRuleCounterEntry ::= SEQUENCE {
rlIpSourceGuardPermittedRuleCounterVLANTag VlanId,
rlIpSourceGuardPermittedRuleCounterNumOfStaticRules Counter32,
rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules Counter32
}
rlIpSourceGuardPermittedRuleCounterVLANTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ip Source Guard permitted rules counters entry Vlan tag."
::= { rlIpSourceGuardPermittedRuleCounterEntry 1 }
rlIpSourceGuardPermittedRuleCounterNumOfStaticRules OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of static rules added by IP Source Guard for the permitted Hosts"
::= { rlIpSourceGuardPermittedRuleCounterEntry 2 }
rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rules added by IP Source Guard for the permitted Hosts,
as a result of DHCP Snooping dynamic information."
::= { rlIpSourceGuardPermittedRuleCounterEntry 3 }
--
-- ARP Inspection
--
RlIpArpInspectListNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ip arp inspection list name type."
SYNTAX DisplayString(SIZE(1..32))
rlIpArpInspectMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpArpInspect 1 }
rlIpArpInspectEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies a system ARP Inspection enable state."
::= { rlIpArpInspect 2 }
rlIpArpInspectLogInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the minimal interval between successive ARP SYSLOG messages.
0 - message is immediately generated.
0xFFFFFFFF - messages would not be generated. A legal range is 0-86400."
::= { rlIpArpInspect 3 }
rlIpArpInspectValidation OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defined a specific check on incoming ARP packets:
Source MAC: Compare the source MAC address in the Ethernet header against
the sender MAC address in the ARP body. This check is performed on both ARP requests and responses.
Destination MAC: Compare the destination MAC address in the Ethernet header against
the target MAC address in ARP body. This check is performed for ARP responses.
IP addresses: Compare the ARP body for invalid and unexpected IP addresses.
Addresses include 0.0.0.0, 255.255.255.255, and all IP multicast addresses."
::= { rlIpArpInspect 4 }
--
-- ARP Inspection List table
--
rlIpArpInspectListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpArpInspectListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table specifies all ARP Inspection List entries.
The entry contains a list name, list IP address, a list Mac address."
::= { rlIpArpInspect 5 }
rlIpArpInspectListEntry OBJECT-TYPE
SYNTAX RlIpArpInspectListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {rlIpArpInspectListName,
rlIpArpInspectListIPAddress}
::= { rlIpArpInspectListTable 1 }
RlIpArpInspectListEntry ::= SEQUENCE {
rlIpArpInspectListName RlIpArpInspectListNameType,
rlIpArpInspectListIPAddress IpAddress,
rlIpArpInspectListMACAddress MacAddress,
rlIpArpInspectListRowStatus RowStatus
}
rlIpArpInspectListName OBJECT-TYPE
SYNTAX RlIpArpInspectListNameType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Name of the Access List."
::= { rlIpArpInspectListEntry 1}
rlIpArpInspectListIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection List IP address."
::= { rlIpArpInspectListEntry 2 }
rlIpArpInspectListMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ARP Inspection List mac address"
::= { rlIpArpInspectListEntry 3 }
rlIpArpInspectListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A status can be destroy, active or createAndGo"
::= { rlIpArpInspectListEntry 4 }
--
-- Arp Inspection Enable VLAN Table
--
rlIpArpInspectEnableVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpArpInspectEnableVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An Ip ARP Inspection enabled VLAN table."
::= { rlIpArpInspect 6 }
rlIpArpInspectEnableVlanEntry OBJECT-TYPE
SYNTAX RlIpArpInspectEnableVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An Ip ARP Inspection enabled VLAN entry."
INDEX {rlIpArpInspectEnableVlanTag}
::= { rlIpArpInspectEnableVlanTable 1 }
RlIpArpInspectEnableVlanEntry ::= SEQUENCE {
rlIpArpInspectEnableVlanTag VlanId,
rlIpArpInspectAssignedListName RlIpArpInspectListNameType,
rlIpArpInspectEnableVlanRowStatus RowStatus,
rlIpArpInspectVlanNumOfArpForwarded Counter32,
rlIpArpInspectVlanNumOfArpDropped Counter32,
rlIpArpInspectVlanNumOfArpMismatched Counter32,
rlIpArpInspectVlanClearCountersAction TruthValue
}
rlIpArpInspectEnableVlanTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Ip ARP Inspection entry vlan tag."
::= { rlIpArpInspectEnableVlanEntry 1 }
rlIpArpInspectAssignedListName OBJECT-TYPE
SYNTAX RlIpArpInspectListNameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Ip ARP Inspection assigned ACL name."
::= { rlIpArpInspectEnableVlanEntry 2 }
rlIpArpInspectEnableVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. A valid status is CreateandGo and Delete."
::= { rlIpArpInspectEnableVlanEntry 3 }
rlIpArpInspectVlanNumOfArpForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of forwarded ARP packets, packets which were validated by ARP inspection "
::= { rlIpArpInspectEnableVlanEntry 4 }
rlIpArpInspectVlanNumOfArpDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dropped ARP packets, which were validated by ARP inspection
(mismatch , not-found and dropped for any reason)"
::= { rlIpArpInspectEnableVlanEntry 5 }
rlIpArpInspectVlanNumOfArpMismatched OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dropped ARP packets, which were validated by ARP inspection
and inconsistency was found for IP and MAC (mismatch)"
::= { rlIpArpInspectEnableVlanEntry 6 }
rlIpArpInspectVlanClearCountersAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, clear (set to zero) all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded ,
rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfArpMismatched"
DEFVAL{ false }
::= { rlIpArpInspectEnableVlanEntry 7 }
--
-- ARP Inspection Trusted ports Table
--
rlIpArpInspectTrustedPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpArpInspectTrustedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ARP Inspection Trusted ports entry. The entry created when port is configured as trusted."
::= { rlIpArpInspect 7 }
rlIpArpInspectTrustedPortEntry OBJECT-TYPE
SYNTAX RlIpArpInspectTrustedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {ifIndex}
::= { rlIpArpInspectTrustedPortTable 1 }
RlIpArpInspectTrustedPortEntry ::= SEQUENCE {
rlIpArpInspectTrustedPortRowStatus RowStatus
}
rlIpArpInspectTrustedPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. A valid status is CreateandGo or Delete."
::= { rlIpArpInspectTrustedPortEntry 2 }
rlIpArpInspectClearCountersAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, clear (set to zero) on all vlans: all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded ,
rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfArpMismatched"
DEFVAL{ false }
::= { rlIpArpInspect 8 }
--
-- Protocol Filtering
--
ProtocolFilteringMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the list of protocol to be filtered.
The bit 'all(0)' indicates all Cisco protocols in range 0100.0ccc.ccc0 - 0100.0ccc.cccf
The bit 'cdp(1)' indicates Cisco CDP protocol.
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x2000.
The bit 'vtp(2)' indicates Cisco VTP protocol.
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x2003.
The bit 'dtp(3)' indicates Cisco DTP protocol.
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x2004.
The bit 'udld (4)' indicates Cisco UDLD protocol.
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x0111.
The bit 'pagp(5)' indicates Cisco PAGP protocol.
Identified by destination mac address: 0100.0ccc.cccc and protocol type: 0x0104.
The bit 'sstp(6)' indicates Cisco SSTP protocol.
Identified by destination mac address: 0100.0ccc.cccd.
"
SYNTAX BITS {
all(0),
cdp(1),
vtp(2),
dtp(3),
udld(4),
pagp(5),
sstp(6)
}
rlProtocolFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlProtocolFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Protocol filter configuration entry"
::= { rlProtocolFiltering 1 }
rlProtocolFilteringEntry OBJECT-TYPE
SYNTAX RlProtocolFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {ifIndex}
::= { rlProtocolFilteringTable 1 }
RlProtocolFilteringEntry::= SEQUENCE {
rlProtocolFilteringList ProtocolFilteringMap,
rlProtocolFilteringRowStatus RowStatus
}
rlProtocolFilteringList OBJECT-TYPE
SYNTAX ProtocolFilteringMap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of protocol to be filtered."
::= { rlProtocolFilteringEntry 1 }
rlProtocolFilteringRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A status can be destroy, active or createAndGo"
::= { rlProtocolFilteringEntry 2 }
--
-- DHCP Option82
--
rlIpDhcpOpt82ConfigEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies a DHCP option 82 configurable state."
::= { rlIpDhcpOpt82 1 }
rlIpDhcpOpt82SuboptionConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpOpt82SuboptionConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Protocol filter configuration entry"
::= { rlIpDhcpOpt82 2 }
rlIpDhcpOpt82SuboptionConfigEntry OBJECT-TYPE
SYNTAX RlIpDhcpOpt82SuboptionConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX {rlIpDhcpOpt82SuboptionConfigIndex}
::= { rlIpDhcpOpt82SuboptionConfigTable 1 }
RlIpDhcpOpt82SuboptionConfigEntry::= SEQUENCE {
rlIpDhcpOpt82SuboptionConfigIndex INTEGER,
rlIpDhcpOpt82SuboptionConfigCircuitIdPayloadLength INTEGER,
rlIpDhcpOpt82SuboptionConfigCircuitIdFormat DisplayString,
rlIpDhcpOpt82SuboptionConfigRemoteIdPayloadLength INTEGER,
rlIpDhcpOpt82SuboptionConfigRemoteIdFormat DisplayString,
rlIpDhcpOpt82SuboptionConfigNumericTokenFormat INTEGER,
rlIpDhcpOpt82SuboptionConfigCircuitIdAuxFailFlag TruthValue
}
rlIpDhcpOpt82SuboptionConfigIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry index. Must be 1"
::= { rlIpDhcpOpt82SuboptionConfigEntry 1 }
rlIpDhcpOpt82SuboptionConfigCircuitIdPayloadLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns CircuitId payload length."
::= { rlIpDhcpOpt82SuboptionConfigEntry 2 }
rlIpDhcpOpt82SuboptionConfigCircuitIdFormat OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..160))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the CircuitId format. Default is an empty string. Empty string means that CircuitId is added in a default format.
Non-empty string AND true value of rlIpDhcpOpt82SuboptionConfigCircuitIdSupported Scalar means that CircuitId is added in configured format"
::= { rlIpDhcpOpt82SuboptionConfigEntry 3 }
rlIpDhcpOpt82SuboptionConfigRemoteIdPayloadLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns RemoteId payload length."
::= { rlIpDhcpOpt82SuboptionConfigEntry 4 }
rlIpDhcpOpt82SuboptionConfigRemoteIdFormat OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..160))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the RemoteId format. Default is an empty string. Empty string means that RemoteId is added in a default format.
Non-empty string AND true value of rlIpDhcpOpt82SuboptionConfigRemoteIdSupported Scalar means that RemoteId is added in configured format"
::= { rlIpDhcpOpt82SuboptionConfigEntry 5 }
rlIpDhcpOpt82SuboptionConfigNumericTokenFormat OBJECT-TYPE
SYNTAX INTEGER{
hex(1),
ascii(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the format of numeric tokens included in the Circuit-id and Remote-ID sub-options string."
::= { rlIpDhcpOpt82SuboptionConfigEntry 6 }
rlIpDhcpOpt82SuboptionConfigCircuitIdAuxFailFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines whatever to fail the CircuitId Suboption configuration"
::= { rlIpDhcpOpt82SuboptionConfigEntry 7 }
--------------------------------------------------------------
-- rlIpDhcpOpt82SuboptionContentTable (Read Only)
--------------------------------------------------------------
rlIpDhcpOpt82SuboptionContentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpOpt82SuboptionContentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table specifies option 82 content."
::= { rlIpDhcpOpt82 3 }
rlIpDhcpOpt82SuboptionContentEntry OBJECT-TYPE
SYNTAX RlIpDhcpOpt82SuboptionContentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX { rlIpDhcpOpt82SuboptionContentIfIndex,
rlIpDhcpOpt82SuboptionContentVlanTag }
::= { rlIpDhcpOpt82SuboptionContentTable 1 }
RlIpDhcpOpt82SuboptionContentEntry ::= SEQUENCE {
rlIpDhcpOpt82SuboptionContentIfIndex InterfaceIndex,
rlIpDhcpOpt82SuboptionContentVlanTag VlanId,
rlIpDhcpOpt82SuboptionContentCircuitIdHeader OCTET STRING,
rlIpDhcpOpt82SuboptionContentCircuitIdPayload160 OCTET STRING,
rlIpDhcpOpt82SuboptionContentCircuitIdPayload320 OCTET STRING,
rlIpDhcpOpt82SuboptionContentRemoteIdHeader OCTET STRING,
rlIpDhcpOpt82SuboptionContentRemoteIdPayload160 OCTET STRING,
rlIpDhcpOpt82SuboptionContentRemoteIdPayload320 OCTET STRING
}
rlIpDhcpOpt82SuboptionContentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port's interface index."
::= { rlIpDhcpOpt82SuboptionContentEntry 1 }
rlIpDhcpOpt82SuboptionContentVlanTag OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { rlIpDhcpOpt82SuboptionContentEntry 2 }
rlIpDhcpOpt82SuboptionContentCircuitIdHeader OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies option 82 CircuitId suboption header content per interface/port"
::= { rlIpDhcpOpt82SuboptionContentEntry 3 }
rlIpDhcpOpt82SuboptionContentCircuitIdPayload160 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies option 82 CircuitId suboption payload first 160 bytes content per interface/port"
::= { rlIpDhcpOpt82SuboptionContentEntry 4 }
rlIpDhcpOpt82SuboptionContentCircuitIdPayload320 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies option 82 CircuitId suboption payload second 160 bytes content per interface/port"
::= { rlIpDhcpOpt82SuboptionContentEntry 5 }
rlIpDhcpOpt82SuboptionContentRemoteIdHeader OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies option 82 RemoteId suboption header content per interface/port"
::= { rlIpDhcpOpt82SuboptionContentEntry 6 }
rlIpDhcpOpt82SuboptionContentRemoteIdPayload160 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies option 82 RemoteId suboption payload first 160 bytes content per interface/port"
::= { rlIpDhcpOpt82SuboptionContentEntry 7 }
rlIpDhcpOpt82SuboptionContentRemoteIdPayload320 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies option 82 RemoteId suboption payload second 160 bytes content per interface/port"
::= { rlIpDhcpOpt82SuboptionContentEntry 8 }
--------------------------------------------------------------
-- rlIpDhcpOpt82SuboptionTokenTable (Read Only)
--------------------------------------------------------------
rlIpDhcpOpt82SuboptionTokenTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpDhcpOpt82SuboptionTokenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table specifies option 82 content."
::= { rlIpDhcpOpt82 4 }
rlIpDhcpOpt82SuboptionTokenEntry OBJECT-TYPE
SYNTAX RlIpDhcpOpt82SuboptionTokenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX { rlIpDhcpOpt82SuboptionTokenName}
::= { rlIpDhcpOpt82SuboptionTokenTable 1 }
RlIpDhcpOpt82SuboptionTokenEntry ::= SEQUENCE {
rlIpDhcpOpt82SuboptionTokenName DisplayString,
rlIpDhcpOpt82SuboptionTokenValue DisplayString,
rlIpDhcpOpt82SuboptionTokenFormat INTEGER,
rlIpDhcpOpt82SuboptionTokenReservedLength INTEGER,
rlIpDhcpOpt82SuboptionTokenHexaLength INTEGER
}
rlIpDhcpOpt82SuboptionTokenName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Token have meaningful and pre-determined names based on the information they represent. A $ symbol is placed before and after the Token name ($token-name$)."
::= { rlIpDhcpOpt82SuboptionTokenEntry 1 }
rlIpDhcpOpt82SuboptionTokenValue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Token description."
::= { rlIpDhcpOpt82SuboptionTokenEntry 2 }
rlIpDhcpOpt82SuboptionTokenFormat OBJECT-TYPE
SYNTAX INTEGER{
hex(1),
ascii(2),
config(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Token format."
::= { rlIpDhcpOpt82SuboptionTokenEntry 3 }
rlIpDhcpOpt82SuboptionTokenReservedLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Token reserved length."
::= { rlIpDhcpOpt82SuboptionTokenEntry 4 }
rlIpDhcpOpt82SuboptionTokenHexaLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If format is config, the hexa length is returned. Otherwise 0."
::= { rlIpDhcpOpt82SuboptionTokenEntry 5 }
END
Reference in New Issue View Git Blame Copy Permalink