mibs/MIBS/cisco/CISCOSB-DHCP-MIB
2023-12-05 12:25:34 +01:00

1186 lines
34 KiB
Plaintext

CISCOSB-DHCP-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB DHCP Server ROS
-- This Private MIB supports the DHCP Server for ROS
-- Version: 7.30
-- Date: 18 Oct 2003
IMPORTS
OBJECT-TYPE, IpAddress, Unsigned32,
MODULE-IDENTITY FROM SNMPv2-SMI
DisplayString, TruthValue, RowStatus FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
switch001 FROM CISCOSB-MIB
PortList FROM Q-BRIDGE-MIB
VlanList1, VlanList2, VlanList3, VlanList4 FROM CISCOSB-BRIDGEMIBOBJECTS-MIB;
rsDHCP MODULE-IDENTITY
LAST-UPDATED "200310180000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for DHCP server support in CISCOSB devices."
REVISION "200310180000Z"
DESCRIPTION
"Initial version of this MIB."
::= { switch001 38 }
-- unused:
-- { rsDHCP 1 } .. { rsDHCP 13 }
rsDhcpMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP MIB's version, the current version is 4."
::= { rsDHCP 14 }
-- unused:
-- { rsDHCP 15 } .. { rsDHCP 21 }
-- =======================================================
-- DHCP Relay
-- =======================================================
rlDhcpRelayMaximalNumberOfNonIpVlans OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximal number non-ip vlans that DHCP relay can be confirued on."
-- DEFVAL { 0 }
::= { rsDHCP 23 }
rlDhcpRelayCurrentNumberOfNonIpVlans OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number non-ip vlans that DHCP relay can be confirued on."
-- DEFVAL { 0 }
::= { rsDHCP 24 }
rlDhcpRelayEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of the DHCP relay."
-- DEFVAL { false }
::= { rsDHCP 25 }
rlDhcpRelayExists OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows whether the device can function as a DHCP Relay Agent."
::= { rsDHCP 26 }
-- Next Servers Table
rlDhcpRelayNextServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpRelayNextServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DHCP Relay Next Servers configuration Table"
::= { rsDHCP 27 }
rlDhcpRelayNextServerEntry OBJECT-TYPE
SYNTAX RlDhcpRelayNextServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table. DHCP requests are relayed to the
specified next server according to their threshold values."
INDEX { rlDhcpRelayNextServerIpAddr }
::= { rlDhcpRelayNextServerTable 1 }
RlDhcpRelayNextServerEntry ::= SEQUENCE {
rlDhcpRelayNextServerIpAddr
IpAddress,
rlDhcpRelayNextServerSecThreshold
Unsigned32,
rlDhcpRelayNextServerRowStatus
RowStatus
}
rlDhcpRelayNextServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPAddress of the next configuration server. DHCP Server may
act as a DHCP relay if this parameter is not equal to 0.0.0.0."
::= { rlDhcpRelayNextServerEntry 1 }
rlDhcpRelayNextServerSecThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP requests are relayed only if their SEC field is greater or
equal to the threshold value in order to allow local DHCP Servers
to answer first."
-- DEFVAL {0}
::= { rlDhcpRelayNextServerEntry 2 }
rlDhcpRelayNextServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent."
::= { rlDhcpRelayNextServerEntry 3 }
-- =======================================================
-- DHCP relay Interface Table - used for backward compatibility
-- =======================================================
rlDhcpRelayInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpRelayInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The enabled DHCP Relay Interface Table"
::= { rsDHCP 28 }
rlDhcpRelayInterfaceEntry OBJECT-TYPE
SYNTAX RlDhcpRelayInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table. The user can add entry when DHCP relay is enabled on Interface."
INDEX { rlDhcpRelayInterfaceIfindex}
::= { rlDhcpRelayInterfaceTable 1 }
RlDhcpRelayInterfaceEntry ::= SEQUENCE {
rlDhcpRelayInterfaceIfindex INTEGER,
rlDhcpRelayInterfaceUseGiaddr TruthValue, -- obsolete
rlDhcpRelayInterfaceRowStatus RowStatus
}
rlDhcpRelayInterfaceIfindex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Interface on which an user enables a DHCP relay "
::= { rlDhcpRelayInterfaceEntry 1}
rlDhcpRelayInterfaceUseGiaddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag is used to set a DHCP relay interface to use GiAddr in the standard way. Default is TRUE.
The field is not supported."
::= { rlDhcpRelayInterfaceEntry 2 }
rlDhcpRelayInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status. Can be destroy, active or createAndGo"
::= { rlDhcpRelayInterfaceEntry 3 }
-- =======================================================
-- DHCP relay interface list Table
-- =======================================================
rlDhcpRelayInterfaceListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RLDhcpRelayInterfaceListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry. The entry contains port list and vlan lists of interfaces that have configured DHCP relay"
::= { rsDHCP 29}
rlDhcpRelayInterfaceListEntry OBJECT-TYPE
SYNTAX RLDhcpRelayInterfaceListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The entry contains port list and vlan lists of interfaces that have configured DHCP relay."
INDEX { rlDhcpRelayInterfaceListIndex }
::= { rlDhcpRelayInterfaceListTable 1 }
RLDhcpRelayInterfaceListEntry::= SEQUENCE {
rlDhcpRelayInterfaceListIndex INTEGER,
rlDhcpRelayInterfaceListPortList PortList,
rlDhcpRelayInterfaceListVlanId1To1024 VlanList1,
rlDhcpRelayInterfaceListVlanId1025To2048 VlanList2,
rlDhcpRelayInterfaceListVlanId2049To3072 VlanList3,
rlDhcpRelayInterfaceListVlanId3073To4094 VlanList4
}
rlDhcpRelayInterfaceListIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index in the table. Already 1."
::= { rlDhcpRelayInterfaceListEntry 1 }
rlDhcpRelayInterfaceListPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP relay Interface Port List."
::= { rlDhcpRelayInterfaceListEntry 2 }
rlDhcpRelayInterfaceListVlanId1To1024 OBJECT-TYPE
SYNTAX VlanList1
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DHCP relay Interface VlanId List 1."
::= { rlDhcpRelayInterfaceListEntry 3 }
rlDhcpRelayInterfaceListVlanId1025To2048 OBJECT-TYPE
SYNTAX VlanList2
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DHCP relay Interface VlanId List 2."
::= { rlDhcpRelayInterfaceListEntry 4 }
rlDhcpRelayInterfaceListVlanId2049To3072 OBJECT-TYPE
SYNTAX VlanList3
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DHCP relay Interface VlanId List 3."
::= { rlDhcpRelayInterfaceListEntry 5 }
rlDhcpRelayInterfaceListVlanId3073To4094 OBJECT-TYPE
SYNTAX VlanList4
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DHCP relay Interface VlanId List 4."
::= { rlDhcpRelayInterfaceListEntry 6 }
-- =======================================================
-- DHCP Server
-- =======================================================
rlDhcpSrvEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable the use of the DHCP Server.
For a router product the default value is TRUE. For a switch product the default is FALSE."
DEFVAL { false }
::= { rsDHCP 30 }
rlDhcpSrvExists OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows whether the device can function as a DHCP Server."
::= { rsDHCP 31 }
rlDhcpSrvDbLocation OBJECT-TYPE
SYNTAX INTEGER {
nvram (1),
flash (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Describes where DHCP Server database is stored."
DEFVAL { flash }
::= { rsDHCP 32 }
rlDhcpSrvMaxNumOfClients OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows maximum number of clients that can be
supported by DHCP Server dynamic allocation."
::= { rsDHCP 33 }
rlDhcpSrvDbNumOfActiveEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of active (valid) entries stored in database."
::= { rsDHCP 34 }
rlDhcpSrvDbErase OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value is always false. Setting this variable to true causes erasing all entries in DHCP database."
DEFVAL { false }
::= { rsDHCP 35 }
rlDhcpSrvProbeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable the use of the DHCP probe before allocating an IP address."
DEFVAL { false }
::= { rsDHCP 36 }
rlDhcpSrvProbeTimeout OBJECT-TYPE
SYNTAX Unsigned32 (300..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peiod of time in milliseconds the DHCP probe will wait before
issuing a new trial or deciding that no other device on the network
has the IP address which DHCP considers allocating."
DEFVAL { 500 }
::= { rsDHCP 37 }
rlDhcpSrvProbeRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how many times DHCP will probe before deciding that no other
device on the network has the IP address which DHCP
considers allocating."
DEFVAL { 2 }
::= { rsDHCP 38 }
rlDhcpSrvDefaultNetworkPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains a default network pool name. Used in case of one network pool only."
::= { rsDHCP 39 }
-- IP Addresses Table
rlDhcpSrvIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpSrvIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IP Addresses allocated by DHCP Server by static
and dynamic allocations."
::= { rsDHCP 45}
rlDhcpSrvIpAddrEntry OBJECT-TYPE
SYNTAX RlDhcpSrvIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table.
Parameters of DHCP allocated IP Addresses table."
INDEX { rlDhcpSrvIpAddrIpAddr }
::= { rlDhcpSrvIpAddrTable 1 }
RlDhcpSrvIpAddrEntry ::= SEQUENCE {
rlDhcpSrvIpAddrIpAddr
IpAddress,
rlDhcpSrvIpAddrIpNetMask
IpAddress,
rlDhcpSrvIpAddrIdentifier
OCTET STRING,
rlDhcpSrvIpAddrIdentifierType
INTEGER,
rlDhcpSrvIpAddrClnHostName
SnmpAdminString,
rlDhcpSrvIpAddrMechanism
INTEGER,
rlDhcpSrvIpAddrAgeTime
Unsigned32,
rlDhcpSrvIpAddrLeaseTime
Unsigned32,
rlDhcpSrvIpAddrState
INTEGER,
rlDhcpSrvIpAddrPoolName
DisplayString,
rlDhcpSrvIpAddrConfParamsName
DisplayString,
rlDhcpSrvIpAddrRowStatus
RowStatus,
rlDhcpSrvIpAddrOptionParamsName
DisplayString
}
rlDhcpSrvIpAddrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address that was allocated by DHCP Server."
::= { rlDhcpSrvIpAddrEntry 1 }
rlDhcpSrvIpAddrIpNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry.
The value of the mask is an IP address with all the network bits
set to 1 and all the hosts bits set to 0."
::= { rlDhcpSrvIpAddrEntry 2 }
rlDhcpSrvIpAddrIdentifier OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique Identifier for client. Either physical address or DHCP Client Identifier."
::= { rlDhcpSrvIpAddrEntry 3 }
rlDhcpSrvIpAddrIdentifierType OBJECT-TYPE
SYNTAX INTEGER {
physAddr(1),
clientId(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifier Type. Either physical address or DHCP Client Identifier."
DEFVAL { clientId }
::= { rlDhcpSrvIpAddrEntry 4 }
rlDhcpSrvIpAddrClnHostName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Client Host Name. DHCP Server will use it to update DNS Server.
Must be unique per client."
::= { rlDhcpSrvIpAddrEntry 5 }
rlDhcpSrvIpAddrMechanism OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
automatic(2),
dynamic(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mechanism of allocation IP Address by DHCP Server.
The only value that can be set by user is manual."
DEFVAL { manual }
::= { rlDhcpSrvIpAddrEntry 6 }
rlDhcpSrvIpAddrAgeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Age time of the IP Address."
DEFVAL { 0 }
::= { rlDhcpSrvIpAddrEntry 7 }
rlDhcpSrvIpAddrPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip address pool name. A unique name for host pool static allocation,
or network pool name in case of dynamic allocation."
::= { rlDhcpSrvIpAddrEntry 8 }
rlDhcpSrvIpAddrConfParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable points (serves as key) to appropriate set of parameters
in the DHCP Server configuration parameters table."
::= { rlDhcpSrvIpAddrEntry 9 }
rlDhcpSrvIpAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlDhcpSrvIpAddrEntry 10 }
rlDhcpSrvIpAddrLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lease time of the IP Address. Get a value of network pool lease time at allocation time."
DEFVAL { 86400 }
::= { rlDhcpSrvIpAddrEntry 11 }
rlDhcpSrvIpAddrState OBJECT-TYPE
SYNTAX INTEGER {
pre-allocated(1),
valid(2),
expired(3),
declined(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of allocation IP Address by DHCP Server."
DEFVAL { valid }
::= { rlDhcpSrvIpAddrEntry 12 }
rlDhcpSrvIpAddrOptionParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of DHCP Option Table."
::= { rlDhcpSrvIpAddrEntry 13 }
-- Dynamic Table
rlDhcpSrvDynamicTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpSrvDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DHCP Dynamic Server's configuration Table"
::= { rsDHCP 46 }
rlDhcpSrvDynamicEntry OBJECT-TYPE
SYNTAX RlDhcpSrvDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table. Parameters sent in
as a DHCP Reply to DHCP Request with specified indices"
INDEX { rlDhcpSrvDynamicPoolName }
::= { rlDhcpSrvDynamicTable 1 }
RlDhcpSrvDynamicEntry ::= SEQUENCE {
rlDhcpSrvDynamicPoolName
DisplayString,
rlDhcpSrvDynamicIpAddrFrom
IpAddress,
rlDhcpSrvDynamicIpAddrTo
IpAddress,
rlDhcpSrvDynamicIpNetMask
IpAddress,
rlDhcpSrvDynamicLeaseTime
Unsigned32,
rlDhcpSrvDynamicProbeEnable
TruthValue,
rlDhcpSrvDynamicTotalNumOfAddr
Unsigned32,
rlDhcpSrvDynamicFreeNumOfAddr
Unsigned32,
rlDhcpSrvDynamicConfParamsName
DisplayString,
rlDhcpSrvDynamicRowStatus
RowStatus,
rlDhcpSrvDynamicAvailableNumOfAddr
Unsigned32,
rlDhcpSrvDynamicNumOfPreallocatedAddr
Unsigned32,
rlDhcpSrvDynamicNumOfValidAddr
Unsigned32,
rlDhcpSrvDynamicNumOfExpiredAddr
Unsigned32,
rlDhcpSrvDynamicNumOfDeclinedAddr
Unsigned32,
rlDhcpSrvDynamicOptionParamsName
DisplayString
}
rlDhcpSrvDynamicPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of DHCP dynamic addresses pool."
::= { rlDhcpSrvDynamicEntry 1 }
rlDhcpSrvDynamicIpAddrFrom OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first IP address allocated in this row."
::= { rlDhcpSrvDynamicEntry 2 }
rlDhcpSrvDynamicIpAddrTo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last IP address allocated in this row."
::= { rlDhcpSrvDynamicEntry 3 }
rlDhcpSrvDynamicIpNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask associated with the IP addresses of this entry.
The value of the mask is an IP address with all the network bits
set to 1 and all the hosts bits set to 0."
::= { rlDhcpSrvDynamicEntry 4 }
rlDhcpSrvDynamicLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum lease-time in seconds granted to a requesting DHCP client.
For automatic allocation use 0xFFFFFFFF.
To exclude addresses from allocation mechanism, set this value to 0."
DEFVAL { 86400 }
::= { rlDhcpSrvDynamicEntry 5 }
rlDhcpSrvDynamicProbeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable the use of the DHCP probe before allocating the address."
DEFVAL { true }
::= { rlDhcpSrvDynamicEntry 6 }
rlDhcpSrvDynamicTotalNumOfAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses in space."
::= { rlDhcpSrvDynamicEntry 7 }
rlDhcpSrvDynamicFreeNumOfAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free number of addresses in space."
::= { rlDhcpSrvDynamicEntry 8 }
rlDhcpSrvDynamicConfParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable points (serves as key) to appropriate set of parameters
in the DHCP Server configuration parameters table."
::= { rlDhcpSrvDynamicEntry 9 }
rlDhcpSrvDynamicRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlDhcpSrvDynamicEntry 10 }
rlDhcpSrvDynamicAvailableNumOfAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of available addresses in space - all range minus excluded."
::= { rlDhcpSrvDynamicEntry 11 }
rlDhcpSrvDynamicNumOfPreallocatedAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of preallocated addresses in space."
::= { rlDhcpSrvDynamicEntry 12 }
rlDhcpSrvDynamicNumOfValidAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Valid (allocated) addresses in space."
::= { rlDhcpSrvDynamicEntry 13 }
rlDhcpSrvDynamicNumOfExpiredAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of expired addresses in space."
::= { rlDhcpSrvDynamicEntry 14 }
rlDhcpSrvDynamicNumOfDeclinedAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of declined addresses in space."
::= { rlDhcpSrvDynamicEntry 15 }
rlDhcpSrvDynamicOptionParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of DHCP Option Table."
::= { rlDhcpSrvDynamicEntry 16 }
-- Configuration Parameters Table
rlDhcpSrvConfParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpSrvConfParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DHCP Configuration Parameters Table"
::= { rsDHCP 47 }
rlDhcpSrvConfParamsEntry OBJECT-TYPE
SYNTAX RlDhcpSrvConfParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table.
Each entry corresponds to one specific parameters set."
INDEX { rlDhcpSrvConfParamsName }
::= { rlDhcpSrvConfParamsTable 1 }
RlDhcpSrvConfParamsEntry ::= SEQUENCE {
rlDhcpSrvConfParamsName
DisplayString,
rlDhcpSrvConfParamsNextServerIp
IpAddress,
rlDhcpSrvConfParamsNextServerName
DisplayString,
rlDhcpSrvConfParamsBootfileName
DisplayString,
rlDhcpSrvConfParamsRoutersList
DisplayString,
rlDhcpSrvConfParamsTimeSrvList
DisplayString,
rlDhcpSrvConfParamsDnsList
DisplayString,
rlDhcpSrvConfParamsDomainName
SnmpAdminString,
rlDhcpSrvConfParamsNetbiosNameList
DisplayString,
rlDhcpSrvConfParamsNetbiosNodeType
INTEGER,
rlDhcpSrvConfParamsCommunity
DisplayString,
rlDhcpSrvConfParamsNmsIp
IpAddress,
rlDhcpSrvConfParamsOptionsList
DisplayString,
rlDhcpSrvConfParamsRowStatus
RowStatus,
rlDhcpSrvConfParamsAutoDefaultRouter
TruthValue
}
rlDhcpSrvConfParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is a unique index for the
entry in the rlDhcpSrvConfParamsTable."
::= { rlDhcpSrvConfParamsEntry 1 }
rlDhcpSrvConfParamsNextServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP of next server for client to use in configuration process."
-- DEFVAL { 0.0.0.0 }
::= { rlDhcpSrvConfParamsEntry 2 }
rlDhcpSrvConfParamsNextServerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mame of next server for client to use in configuration process."
::= { rlDhcpSrvConfParamsEntry 3 }
rlDhcpSrvConfParamsBootfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of file for client to request from next server."
::= { rlDhcpSrvConfParamsEntry 4 }
rlDhcpSrvConfParamsRoutersList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of option code 3, which defines default routers list.
Each IP address is represented in dotted decimal notation format
with ';' between them."
::= { rlDhcpSrvConfParamsEntry 5 }
rlDhcpSrvConfParamsTimeSrvList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of option code 4, which defines time servers list.
Each IP address is represented in dotted decimal notation format
with ';' between them."
::= { rlDhcpSrvConfParamsEntry 6 }
rlDhcpSrvConfParamsDnsList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of option code 6, which defines the list of DNSs.
Each IP address is represented in dotted decimal notation format
with ';' between them."
::= { rlDhcpSrvConfParamsEntry 7 }
rlDhcpSrvConfParamsDomainName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value option code 15, which defines the domain name.."
::= { rlDhcpSrvConfParamsEntry 8 }
rlDhcpSrvConfParamsNetbiosNameList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value option code 44, which defines the list of NETBios
Name Servers. Each IP address is represented in dotted decimal
notation format with ';' between them."
::= { rlDhcpSrvConfParamsEntry 9 }
rlDhcpSrvConfParamsNetbiosNodeType OBJECT-TYPE
SYNTAX INTEGER {
b-node(1),
p-node(2),
m-node(4),
h-node(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value option code 46, which defines the NETBios node type.
The option will be added only if rlDhcpSrvConfParamsNetbiosNameList
is not empty."
DEFVAL { h-node }
::= { rlDhcpSrvConfParamsEntry 10 }
rlDhcpSrvConfParamsCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of site-specific option 128, which defines Community.
The option will be added only if rlDhcpSrvConfParamsNmsIp is set."
DEFVAL { "public" }
::= { rlDhcpSrvConfParamsEntry 11 }
rlDhcpSrvConfParamsNmsIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of site-specific option 129,
which defines IP of Network Manager."
-- DEFVAL { 0.0.0.0 }
::= { rlDhcpSrvConfParamsEntry 12 }
rlDhcpSrvConfParamsOptionsList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The sequence of option segments. Each option segment
is represented by a triplet <code/length/value>.
The code defines the code of each supported option.
The length defines the length of each supported option.
The value defines the value of the supported option.
If there is a number of elements in the value field,
they are divided by ','. Each element of type IP address
in value field is represented in dotted decimal notation
format."
::= { rlDhcpSrvConfParamsEntry 13 }
rlDhcpSrvConfParamsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlDhcpSrvConfParamsEntry 14 }
rlDhcpSrvConfParamsAutoDefaultRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls sending an IP address defined on the input interface
as a default router when an default router is not configured as option."
DEFVAL { true }
::= { rlDhcpSrvConfParamsEntry 15 }
rlDhcpSrvNumOfNetworkPools OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of network pools (not excluded)."
::= { rsDHCP 48 }
rlDhcpSrvNumOfExcludedPools OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of excluded pools."
::= { rsDHCP 49 }
rlDhcpSrvNumOfHostPools OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of static entries stored in database."
::= { rsDHCP 50 }
rlDhcpSrvNumOfDynamicEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of dynamic and automatic (not static) entries stored in database."
::= { rsDHCP 51 }
rlDhcpSrvNumOfUsedEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of entries (any type) stored in database."
::= { rsDHCP 52 }
rlDhcpSrvNumOfPreAllocatedEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of preallocated entries."
::= { rsDHCP 53 }
rlDhcpSrvNumOfExpiredEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of expired entries."
::= { rsDHCP 54 }
rlDhcpSrvNumOfDeclinedEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of declined entries."
::= { rsDHCP 55 }
rlDhcpSrvNumOfAutomaticEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable shows number of automatic entries."
::= { rsDHCP 56 }
-- Option Parameters Table
RlDhcpSrvOptionTypeEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ip Dhcp server option type enumeration."
SYNTAX INTEGER {
boolean(1),
integer(2),
ascii(3),
ip(4),
hex(5),
ip-list(6)
}
rlDhcpSrvOptionParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpSrvOptionParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DHCP Option Parameters Table"
::= { rsDHCP 57 }
rlDhcpSrvOptionParamsEntry OBJECT-TYPE
SYNTAX RlDhcpSrvOptionParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table.
Each entry corresponds to one specific parameters set."
INDEX { rlDhcpSrvOptionParamsName, rlDhcpSrvOptionParamsCode }
::= { rlDhcpSrvOptionParamsTable 1 }
RlDhcpSrvOptionParamsEntry ::= SEQUENCE {
rlDhcpSrvOptionParamsName
DisplayString,
rlDhcpSrvOptionParamsCode
Unsigned32,
rlDhcpSrvOptionParamsType
RlDhcpSrvOptionTypeEnum,
rlDhcpSrvOptionParamsOrigString
DisplayString,
rlDhcpSrvOptionParamsDescription
DisplayString,
rlDhcpSrvOptionParamsRowStatus
RowStatus
}
rlDhcpSrvOptionParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is a unique index for the
entry in the rlDhcpSrvOptionParamsTable."
::= { rlDhcpSrvOptionParamsEntry 1 }
rlDhcpSrvOptionParamsCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The option code."
::= { rlDhcpSrvOptionParamsEntry 2 }
rlDhcpSrvOptionParamsType OBJECT-TYPE
SYNTAX RlDhcpSrvOptionTypeEnum
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The option type."
::= { rlDhcpSrvOptionParamsEntry 3 }
rlDhcpSrvOptionParamsOrigString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The option value."
::= { rlDhcpSrvOptionParamsEntry 4 }
rlDhcpSrvOptionParamsDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The option description."
::= { rlDhcpSrvOptionParamsEntry 5 }
rlDhcpSrvOptionParamsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlDhcpSrvOptionParamsEntry 6 }
-- Auxulary Option Table
rlDhcpSrvAuxOptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpSrvAuxOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DHCP Auxulary Option Table"
::= { rsDHCP 58 }
rlDhcpSrvAuxOptionEntry OBJECT-TYPE
SYNTAX RlDhcpSrvAuxOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table.
Each entry contains pair option code/option type that permitted by option command."
INDEX { rlDhcpSrvAuxOptionCode, rlDhcpSrvAuxOptionType }
::= { rlDhcpSrvAuxOptionTable 1 }
RlDhcpSrvAuxOptionEntry ::= SEQUENCE {
rlDhcpSrvAuxOptionCode
Unsigned32,
rlDhcpSrvAuxOptionType
RlDhcpSrvOptionTypeEnum,
rlDhcpSrvAuxOptionMinVal
Unsigned32,
rlDhcpSrvAuxOptionMaxVal
Unsigned32
}
rlDhcpSrvAuxOptionCode OBJECT-TYPE
SYNTAX Unsigned32 (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The option Code."
::= { rlDhcpSrvAuxOptionEntry 1 }
rlDhcpSrvAuxOptionType OBJECT-TYPE
SYNTAX RlDhcpSrvOptionTypeEnum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The option enumeration."
::= { rlDhcpSrvAuxOptionEntry 2 }
rlDhcpSrvAuxOptionMinVal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimal value of this option Code."
::= { rlDhcpSrvAuxOptionEntry 3 }
rlDhcpSrvAuxOptionMaxVal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal value of this option Code."
::= { rlDhcpSrvAuxOptionEntry 4 }
END