mibs/MIBS/cisco/CISCOSB-GREEN-MIB
2023-12-05 12:25:34 +01:00

248 lines
7.5 KiB
Plaintext

CISCOSB-GREEN-MIB DEFINITIONS ::= BEGIN
-- Title: CISCO GREEN ETHERNET MIB
-- Version: 7.47
-- Date: 25 Aug 2008
--
IMPORTS
switch001 FROM CISCOSB-MIB
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC
PortList FROM Q-BRIDGE-MIB
ifIndex FROM IF-MIB;
rlGreenEth MODULE-IDENTITY -- August 15, 2008
LAST-UPDATED "200808150001Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION "The private MIB module definition for Green Ethernet Energy Detect feature."
REVISION "200808150000Z"
DESCRIPTION "Add Green Ethernet Energy Detect and Short Reach support per port and per system rlGreenEthernet"
::= { switch001 134}
rlGreenEthEnergyDetectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This scalar defines Green Ethernet Enrgy-Detect Globaly"
::= { rlGreenEth 1 }
rlGreenEthShortReachEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This scalar defines Green Ethernet Short-Reach Globaly"
::= { rlGreenEth 2 }
rlGreenEthCurrentEnergyConsumption OBJECT-TYPE
SYNTAX Unsigned32
UNITS "mWatt"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar define Green Ethernet all modes current Energy consumption per system in mWatt
in order to calculate current energy consumption in percent proportional to Consumption without Green Ethernet feature
please use the following formula:
(rlGreenEthCurrentEnergyConsumption/rlGreenEthCurrentMaxEnergyConsumption)*100"
::= { rlGreenEth 3 }
rlGreenEthCurrentMaxEnergyConsumption OBJECT-TYPE
SYNTAX Unsigned32
UNITS "mWatt"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar define Green Ethernet current maximum consumption Energy consumption per system in mWatt,
as it was without Green Ethernet feature."
::= { rlGreenEth 4 }
rlGreenEthCumulativePowerSaveMeter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watt*Hour"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar define Green Ethernet cumulative power save per system in Watt*Hour"
::= { rlGreenEth 5 }
rlGreenEthShortReachThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..70)
UNITS "meter"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The usage threshold expressed in meter for
determinate the cable length for Short-Reach"
::= { rlGreenEth 6 }
rlGreenEthCumulativePowerSaveMeterReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rlGreenEthCumulativePowerSaveMeterReset indicates that rlGreenEthCumulativePowerSaveMeter
should be set to ziro.
This object behaviors as write-only than
reading this object will always return 'false'."
DEFVAL{ false }
::= { rlGreenEth 7 }
RlGreenSavingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Green saving types:
energyDetect(1) uses energy detect
shortReach(2) uses Short Reach"
SYNTAX INTEGER {
energyDetect (1),
shortReach (2)
}
NonOperReasonType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Reason why Green Ethernet is not activated saving on a port
NP(1) Port is not present - Applicable in ED & SR
LT(2) Link Type is not supported(fiber, auto media setect) - Applicable in ED & SR
LU(3) Port link is up - Applicable only in ED
LS(4) Link speed is not supported (100M,10M,10G) - Applicable only in SR
LL(5) Link length received from VCT test exceed threshold - Applicable only in SR
ER(6) Errors detected on line and port revered back to Long Reach(only in enhanced mode) - Applicable only in SR
LD(7) Port link is Down - Applicable only in SR
unknown(8) In case that green Active or disable on port"
SYNTAX INTEGER {
np(1),
lt(2),
lu(3),
ls(4),
ll(5),
er(6),
ld(7),
unknown(8)
}
CableLengthRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"cable length calculated when link is up
Relevant only for SR"
SYNTAX INTEGER {
lengthUnknown(0),
lengthLessThan50M(1),
length50MTo80M(2),
length80MTo110M(3),
length110MTo140M(4),
lengthMoreThan140M(5)
}
rlGreenEthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlGreenEthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of green state of ports"
::= { rlGreenEth 8 }
rlGreenEthPortEntry OBJECT-TYPE
SYNTAX RlGreenEthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of green state of port"
INDEX { ifIndex,
rlGreenEthPortSavingTypeValue }
::= { rlGreenEthPortTable 1 }
RlGreenEthPortEntry ::= SEQUENCE {
rlGreenEthPortSavingTypeValue RlGreenSavingType,
rlGreenEthPortAdminState TruthValue,
rlGreenEthPortOperState TruthValue,
rlGreenEthPortNonOperReason NonOperReasonType,
rlGreenEthPortCableLength CableLengthRange
}
rlGreenEthPortSavingTypeValue OBJECT-TYPE
SYNTAX RlGreenSavingType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Green saving types"
::= { rlGreenEthPortEntry 1 }
rlGreenEthPortAdminState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Active\non Active"
::= { rlGreenEthPortEntry 2 }
rlGreenEthPortOperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Active\non Active"
::= { rlGreenEthPortEntry 3 }
rlGreenEthPortNonOperReason OBJECT-TYPE
SYNTAX NonOperReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason why saving mode is not activated"
::= { rlGreenEthPortEntry 4 }
rlGreenEthPortCableLength OBJECT-TYPE
SYNTAX CableLengthRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"cable length calculated when link is up"
::= { rlGreenEthPortEntry 5 }
rlGreenEthForceShortReachIfIndexList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports that forced enable the Green Ethernet Short Reach configuration
not considering VCT results."
DEFVAL { ''H } -- empty octet string
::= { rlGreenEth 9 }
rlGreenEthMaskLedStatus OBJECT-TYPE
SYNTAX INTEGER {
off (0),
on (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask all ports led according to the configuration."
DEFVAL{ off }
::= { rlGreenEth 10 }
END