892 lines
27 KiB
Plaintext
892 lines
27 KiB
Plaintext
CISCOSB-POE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB LOCALIZATION ROS
|
|
-- This Private MIB is enhancement for rfc3621.txt - Power Ethernet Mib
|
|
-- Version: 7.60
|
|
-- Date: 28 Nov 2005
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
DisplayString, TruthValue FROM SNMPv2-TC
|
|
InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB
|
|
OBJECT-TYPE, MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI
|
|
PortList FROM Q-BRIDGE-MIB;
|
|
|
|
|
|
rlPoe MODULE-IDENTITY
|
|
LAST-UPDATED "202105190000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"Add a new field in the PoE MIB to indicate Max power allocation allowed"
|
|
REVISION "202105190000Z"
|
|
DESCRIPTION
|
|
"The private MIB module definition for Power Over Ethernet."
|
|
REVISION "200911260000Z"
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { switch001 108 }
|
|
RlPoeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "PoE types:
|
|
1 - none: no PoE, unknown type;
|
|
2 - PoE: Standard AF PoE
|
|
3 - PoE Plus: Standard AT PoE
|
|
4 - 60 W: 60W poe port
|
|
5 - PoE BT: 802.3BT standard"
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
poe(2),
|
|
poeplus(3),
|
|
poe60w(4),
|
|
poeBT(5)
|
|
}
|
|
|
|
--rlPethPsePortTable
|
|
|
|
rlPethPsePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlPethPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table listing additional information for Power Over Ethernet ports."
|
|
::= {rlPoe 1 }
|
|
|
|
rlPethPsePortEntry OBJECT-TYPE
|
|
SYNTAX RlPethPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the rlPethPsePortTable."
|
|
INDEX { rlPethPsePortGroupIndex , rlPethPsePortIndex }
|
|
::= {rlPethPsePortTable 1 }
|
|
|
|
RlPethPsePortEntry ::= SEQUENCE {
|
|
rlPethPsePortGroupIndex INTEGER,
|
|
rlPethPsePortIndex INTEGER,
|
|
rlPethPsePortOutputVoltage INTEGER,
|
|
rlPethPsePortOutputCurrent INTEGER,
|
|
rlPethPsePortOutputPower INTEGER,
|
|
rlPethPsePortPowerLimit INTEGER,
|
|
rlPethPsePortStatus INTEGER,
|
|
rlPethPsePortStatusDescription DisplayString,
|
|
rlPethPsePortOperPowerLimit INTEGER,
|
|
rlPethPsePortTimeRangeName DisplayString,
|
|
rlPethPsePortOperStatus TruthValue,
|
|
rlPethPsePortMaxPowerAllocAllowed INTEGER,
|
|
rlPethPsePortSupportPoeType RlPoeType,
|
|
rlPethPsePortLinkPartnerPoeType RlPoeType,
|
|
rlPethPsePortFourPairForced INTEGER,
|
|
rlPethPsePortFourPairEnabled INTEGER,
|
|
rlPethPsePortNegotiationAllocatedPower INTEGER,
|
|
rlPethPsePortNegotiationProtocolOwner INTEGER,
|
|
rlPethPsePortLegacySupport INTEGER,
|
|
rlPethPsePortHighPowerModeEnable INTEGER,
|
|
rlPethPsePortMenagementMode INTEGER,
|
|
rlPethPsePortStaticPowerAllocation INTEGER,
|
|
rlPethPsePortHighPowerOpStatus INTEGER
|
|
}
|
|
|
|
rlPethPsePortGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group
|
|
containing the port to which a power Ethernet PSE is
|
|
connected. Group means box in the stack, module in a
|
|
rack and the value 1 MUST be used for non-modular devices.
|
|
Furthermore, the same value MUST be used in this variable,
|
|
pethMainPseGroupIndex, and pethNotificationControlGroupIndex
|
|
to refer to a given box in a stack or module in the rack."
|
|
::= { rlPethPsePortEntry 1 }
|
|
|
|
rlPethPsePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the power Ethernet PSE
|
|
port within group pethPsePortGroupIndex to which the
|
|
power Ethernet PSE entry is connected."
|
|
::= { rlPethPsePortEntry 2 }
|
|
|
|
rlPethPsePortOutputVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates on the output voltage level in milli volts from rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 3 }
|
|
|
|
rlPethPsePortOutputCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates on the output current level in milli amper from rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 4 }
|
|
|
|
rlPethPsePortOutputPower OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates on the output power level in milli watts from rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 5 }
|
|
|
|
rlPethPsePortPowerLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 6 }
|
|
|
|
rlPethPsePortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates on the hardware status of rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 7 }
|
|
|
|
rlPethPsePortStatusDescription OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..120))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the description of the hardware status of rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 8 }
|
|
|
|
rlPethPsePortOperPowerLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 9 }
|
|
|
|
rlPethPsePortTimeRangeName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to bind PoE port to time range."
|
|
::= { rlPethPsePortEntry 10 }
|
|
|
|
rlPethPsePortOperStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status."
|
|
::= { rlPethPsePortEntry 11 }
|
|
|
|
rlPethPsePortMaxPowerAllocAllowed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex."
|
|
::= { rlPethPsePortEntry 12 }
|
|
|
|
rlPethPsePortSupportPoeType OBJECT-TYPE
|
|
SYNTAX RlPoeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the supported type of the PoE port"
|
|
::= { rlPethPsePortEntry 13 }
|
|
|
|
rlPethPsePortLinkPartnerPoeType OBJECT-TYPE
|
|
SYNTAX RlPoeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the link partner PoE type."
|
|
::= { rlPethPsePortEntry 14 }
|
|
|
|
rlPethPsePortFourPairForced OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forcedEnable(0),
|
|
forcedDisable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable enabled the spare pair ALT_B in 60W port to force 4 pair enable."
|
|
::= { rlPethPsePortEntry 15 }
|
|
|
|
rlPethPsePortFourPairEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fourPairEnable(1),
|
|
fourPairDisable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates that spare pair ALT_B is enable."
|
|
::= { rlPethPsePortEntry 16 }
|
|
|
|
rlPethPsePortNegotiationAllocatedPower OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the power allocation in milli watts from power negotiation"
|
|
::= { rlPethPsePortEntry 17 }
|
|
|
|
rlPethPsePortNegotiationProtocolOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
protocolOwnerNone(0),
|
|
protocolOwnerCDP(1),
|
|
protocolOwnerLLDP(2),
|
|
protocolOwnerCDPExpired(3),
|
|
protocolOwnerLLDPExpired(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the protocol owner on power management negotiation protocol"
|
|
::= { rlPethPsePortEntry 18 }
|
|
|
|
rlPethPsePortLegacySupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-relevant(0),
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies poe Legacy per port configuration mode"
|
|
::= { rlPethPsePortEntry 19 }
|
|
|
|
rlPethPsePortHighPowerModeEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-relevant(0),
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies poe port high power configuration mode"
|
|
::= { rlPethPsePortEntry 20 }
|
|
|
|
rlPethPsePortMenagementMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-relevant(0),
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies poe power management mode configuration mode"
|
|
::= { rlPethPsePortEntry 21 }
|
|
|
|
rlPethPsePortStaticPowerAllocation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates PoE Static power allocation.
|
|
Static power allocation can be configured by setting rlPethPsePortMenagementMode"
|
|
::= { rlPethPsePortEntry 22 }
|
|
|
|
rlPethPsePortHighPowerOpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-relevant(0),
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the poe port high power status"
|
|
::= { rlPethPsePortEntry 23 }
|
|
|
|
--rlPethMainPseTable
|
|
|
|
rlPethMainPseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlPethMainPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table listing additional read - only information for Power Over Ethernet."
|
|
::= {rlPoe 2 }
|
|
|
|
rlPethMainPseEntry OBJECT-TYPE
|
|
SYNTAX RlPethMainPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the rlPethMainPseTable."
|
|
INDEX { rlPethMainPseGroupIndex }
|
|
::= {rlPethMainPseTable 1 }
|
|
|
|
RlPethMainPseEntry ::= SEQUENCE {
|
|
rlPethMainPseGroupIndex INTEGER,
|
|
rlPethMainPseSwVersion DisplayString,
|
|
rlPethMainPseHwVersion DisplayString,
|
|
rlPethMainPseHwType INTEGER,
|
|
rlPethMainPsePowerGuardBand INTEGER,
|
|
rlPethMainPsePowerManagementMode INTEGER,
|
|
rlPethMainPsedisconnectMethod INTEGER,
|
|
rlPethMainPseTemperatureSensor INTEGER,
|
|
rlPethMainPseInrushTestEnabled INTEGER,
|
|
rlPethMainPseLegacyDisabled INTEGER,
|
|
rlPethMainBanksValues OCTET STRING,
|
|
rlPethMainBanksActivePowerBank INTEGER
|
|
}
|
|
|
|
rlPethMainPseGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group
|
|
containing the port to which a power Ethernet PSE is
|
|
connected. Group means box in the stack, module in a
|
|
rack and the value 1 MUST be used for non-modular devices.
|
|
Furthermore, the same value MUST be used in this variable,
|
|
pethMainPseGroupIndex, and pethNotificationControlGroupIndex
|
|
to refer to a given box in a stack or module in the rack."
|
|
::= { rlPethMainPseEntry 1 }
|
|
|
|
rlPethMainPseSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the MCU SW version."
|
|
::= { rlPethMainPseEntry 2 }
|
|
|
|
rlPethMainPseHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This variable identifies the MCU HW version."
|
|
::= { rlPethMainPseEntry 3 }
|
|
|
|
rlPethMainPseHwType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enhanced(1),
|
|
plus(2),
|
|
auto(3),
|
|
nonPoe(4),
|
|
enhancedPlus(5),
|
|
poe60w(6),
|
|
poeBT(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the MCU HW type (enhanced, plus, none)."
|
|
::= { rlPethMainPseEntry 4 }
|
|
|
|
rlPethMainPsePowerGuardBand OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the guard band in [W] for not connecting
|
|
additional ports."
|
|
::= { rlPethMainPseEntry 5 }
|
|
|
|
rlPethMainPsePowerManagementMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portlimit(0),
|
|
classlimit(5),
|
|
maxlimit(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies power management mode."
|
|
::= { rlPethMainPseEntry 6 }
|
|
|
|
rlPethMainPsedisconnectMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lowestpriority(0),
|
|
nextport(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies disconnect method. "
|
|
::= { rlPethMainPseEntry 7 }
|
|
|
|
rlPethMainPseTemperatureSensor OBJECT-TYPE
|
|
SYNTAX INTEGER (-200..200)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the pd temperature sensor. "
|
|
::= { rlPethMainPseEntry 8 }
|
|
|
|
rlPethMainPseInrushTestEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(0),
|
|
disabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies if HW inrush test will be disabled.
|
|
by default HW inrush test is enabled."
|
|
::= { rlPethMainPseEntry 9 }
|
|
|
|
rlPethMainPseLegacyDisabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(0),
|
|
disabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies poe Legacy global configuration mode"
|
|
::= { rlPethMainPseEntry 10 }
|
|
|
|
rlPethMainBanksValues OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable returns 16 power-banks of a specific switch"
|
|
::= { rlPethMainPseEntry 11 }
|
|
|
|
rlPethMainBanksActivePowerBank OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable returns the active power-bank of a specific switch"
|
|
::= { rlPethMainPseEntry 12 }
|
|
|
|
--rlPethPdPortTable
|
|
|
|
rlPethPdPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlPethPdPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table listing additional read-write information for Power Over Ethernet - PD side."
|
|
::= {rlPoe 4 }
|
|
|
|
rlPethPdPortEntry OBJECT-TYPE
|
|
SYNTAX RlPethPdPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the rlPethPdPortTable."
|
|
INDEX { rlPethPdPortIndex }
|
|
::= {rlPethPdPortTable 1}
|
|
|
|
RlPethPdPortEntry ::= SEQUENCE {
|
|
rlPethPdPortIndex InterfaceIndex,
|
|
rlPethPdPortSupportPoeType RlPoeType,
|
|
rlPethPdPortOperPoeType RlPoeType,
|
|
rlPethPdPortPowerRequest Unsigned32,
|
|
rlPethPdPortPowerAvailable Unsigned32,
|
|
rlPethPdPortForcedMode RlPoeType,
|
|
rlPethPdPortNegotiationProtocolOwner INTEGER
|
|
}
|
|
|
|
rlPethPdPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the power Ethernet PD
|
|
port within group rlPethPdPortGroupIndex to which the
|
|
power Ethernet PSE entry is connected."
|
|
::= { rlPethPdPortEntry 1 }
|
|
|
|
rlPethPdPortSupportPoeType OBJECT-TYPE
|
|
SYNTAX RlPoeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the PoE type of the PD port (AF/AT/60W)"
|
|
::= { rlPethPdPortEntry 2 }
|
|
|
|
rlPethPdPortOperPoeType OBJECT-TYPE
|
|
SYNTAX RlPoeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the operational PoE status of the PD port"
|
|
::= { rlPethPdPortEntry 3 }
|
|
|
|
rlPethPdPortPowerRequest OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the requested power the PD port request from the PSE in mili-Watts"
|
|
::= { rlPethPdPortEntry 4 }
|
|
|
|
rlPethPdPortPowerAvailable OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the available power the PSE port offers to the PD port in mili-Watts"
|
|
::= { rlPethPdPortEntry 5 }
|
|
|
|
rlPethPdPortForcedMode OBJECT-TYPE
|
|
SYNTAX RlPoeType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the powered PD port forced mode"
|
|
::= { rlPethPdPortEntry 6 }
|
|
|
|
rlPethPdPortNegotiationProtocolOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
protocolOwnerNone(0),
|
|
protocolOwnerCDP(1),
|
|
protocolOwnerLLDP(2),
|
|
protocolOwnerCDPExpired(3),
|
|
protocolOwnerLLDPExpired(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the protocol owner on power management negotiation protocol"
|
|
::= { rlPethPdPortEntry 7 }
|
|
|
|
|
|
--rlPethPseUnitTable
|
|
|
|
rlPethPseUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlPethPseUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table listing additional read-write information for Power Over Ethernet unit capabilities."
|
|
::= {rlPoe 5 }
|
|
|
|
rlPethPseUnitEntry OBJECT-TYPE
|
|
SYNTAX RlPethPseUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the rlPethPseUnitTable."
|
|
INDEX { rlPethUnitIndex }
|
|
::= {rlPethPseUnitTable 1 }
|
|
|
|
RlPethPseUnitEntry ::= SEQUENCE {
|
|
rlPethUnitIndex INTEGER,
|
|
rlPethUnitType INTEGER,
|
|
rlPethUnitColor INTEGER
|
|
}
|
|
|
|
rlPethUnitIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the unit id.
|
|
It means box in the stack, module in a
|
|
rack and the value 1 MUST be used for non-modular devices.
|
|
Furthermore, the same value MUST be used in this variable,
|
|
PethPowerPseGroupIndex, and pethNotificationControlGroupIndex
|
|
to refer to a given box in a stack or module in the rack."
|
|
::= { rlPethPseUnitEntry 1 }
|
|
|
|
rlPethUnitType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unitTypeNone(0),
|
|
unitTypePSE(1),
|
|
unitTypePD(2),
|
|
unitTypePSEPD(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the unit type (PSE/PD/Both/None)."
|
|
::= { rlPethPseUnitEntry 2 }
|
|
|
|
rlPethUnitColor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unitColorNone(0),
|
|
unitColorGreen(1),
|
|
unitColorYellow(2),
|
|
unitColorRed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the unit PSE status (color can be green,yellow,red)."
|
|
::= { rlPethPseUnitEntry 3 }
|
|
|
|
--
|
|
-- Clear port counters Section
|
|
--
|
|
|
|
rlPethPseCountersClear OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear poe port counter. By setting the MIB to 0x0FFFFFFF, all poe ports counters are set to zero.
|
|
by Setting to port index, all specific poe port counters are set to zero"
|
|
::= {rlPoe 6}
|
|
|
|
rlPoeClassErrorDetectionStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies if class detection error is enabled (true) or disabled (false)"
|
|
DEFVAL { true }
|
|
::= { rlPoe 8 }
|
|
|
|
--rlPethPerPseTable
|
|
|
|
rlPethPerPseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlPethPerPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table listing additional information for Power Over Ethernet ports per PSE device."
|
|
::= {rlPoe 9 }
|
|
|
|
rlPethPerPseEntry OBJECT-TYPE
|
|
SYNTAX RlPethPerPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the rlPethPerPseTable."
|
|
INDEX { rlPethPerPseGroupIndex, rlPethPerPseDeviceIndex }
|
|
::= {rlPethPerPseTable 1 }
|
|
|
|
RlPethPerPseEntry ::= SEQUENCE {
|
|
rlPethPerPseGroupIndex INTEGER,
|
|
rlPethPerPseDeviceIndex INTEGER,
|
|
rlPethPerPseTemperatureValue INTEGER,
|
|
rlPethPerPseHwRevision DisplayString,
|
|
rlPethPerPseVopStatus INTEGER
|
|
}
|
|
|
|
rlPethPerPseGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group
|
|
containing the port to which a power Ethernet PSE is
|
|
connected. Group means box in the stack, module in a
|
|
rack and the value 1 MUST be used for non-modular devices."
|
|
::= { rlPethPerPseEntry 1 }
|
|
|
|
rlPethPerPseDeviceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the PSE device within the group."
|
|
::= { rlPethPerPseEntry 2 }
|
|
|
|
rlPethPerPseTemperatureValue OBJECT-TYPE
|
|
SYNTAX INTEGER (-200..200)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents temperature reported from PSE device."
|
|
::= { rlPethPerPseEntry 3 }
|
|
|
|
rlPethPerPseHwRevision OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the MCU HW version."
|
|
::= { rlPethPerPseEntry 4 }
|
|
|
|
rlPethPerPseVopStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deviceOk(0),
|
|
detectionError(1),
|
|
classificationError(2),
|
|
legacyError(3),
|
|
undefinedState(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies status of VoP problem in PoE device"
|
|
DEFVAL { 0 }
|
|
::= { rlPethPerPseEntry 5 }
|
|
|
|
rlPethPsePortReactivate OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action MIB scalar. In case the ports in the port-list are disabled due to PoE HW error,
|
|
the PoE mechanism will try to re-activate them."
|
|
DEFVAL { ''H } -- empty octet string
|
|
::= { rlPoe 10 }
|
|
|
|
--rlPethPowerPseTable
|
|
--DEPRECATED
|
|
|
|
rlPethPowerPseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlPethPowerPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table listing additional read-write information for Power Over Ethernet - PSE side."
|
|
::= {rlPoe 3 }
|
|
|
|
rlPethPowerPseEntry OBJECT-TYPE
|
|
SYNTAX RlPethPowerPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the rlPethPowerPseTable."
|
|
INDEX { rlPethPowerPseGroupIndex }
|
|
::= {rlPethPowerPseTable 1 }
|
|
|
|
RlPethPowerPseEntry ::= SEQUENCE {
|
|
rlPethPowerPseGroupIndex INTEGER,
|
|
rlPethPowerPsePower INTEGER,
|
|
rlPethPowerPseRpsPower INTEGER,
|
|
rlPethPowerPsePowerManagementMode INTEGER,
|
|
rlPethPowerPsedisconnectMethod INTEGER,
|
|
rlPethPowerPseTemperatureSensor INTEGER,
|
|
rlPethPowerPseInrushTestEnabled INTEGER,
|
|
rlPethPowerPseLegacyDisabled INTEGER,
|
|
rlPethPowerBanksValues OCTET STRING,
|
|
rlPethPowerBanksActivePowerBank INTEGER
|
|
}
|
|
|
|
rlPethPowerPseGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group
|
|
containing the port to which a power Ethernet PSE is
|
|
connected. Group means box in the stack, module in a
|
|
rack and the value 1 MUST be used for non-modular devices.
|
|
Furthermore, the same value MUST be used in this variable,
|
|
PethPowerPseGroupIndex, and pethNotificationControlGroupIndex
|
|
to refer to a given box in a stack or module in the rack."
|
|
::= { rlPethPowerPseEntry 1 }
|
|
|
|
|
|
-- depricated
|
|
rlPethPowerPsePower OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
ps1(1),
|
|
ps2(2),
|
|
ps3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the maximum power in [W] supplied by PSE."
|
|
::= { rlPethPowerPseEntry 2 }
|
|
|
|
-- depricated
|
|
rlPethPowerPseRpsPower OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
rps1(1),
|
|
rps2(2),
|
|
rps3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the maximum power in [W] supplied by PSE + RPS."
|
|
::= { rlPethPowerPseEntry 3 }
|
|
|
|
rlPethPowerPsePowerManagementMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portlimit(0),
|
|
classlimit(5),
|
|
maxlimit(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies power management mode."
|
|
::= { rlPethPowerPseEntry 4 }
|
|
|
|
rlPethPowerPsedisconnectMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lowestpriority(0),
|
|
nextport(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies disconnect method. "
|
|
::= { rlPethPowerPseEntry 5 }
|
|
|
|
rlPethPowerPseTemperatureSensor OBJECT-TYPE
|
|
SYNTAX INTEGER (-200..200)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the pd temperature sensor. "
|
|
::= { rlPethPowerPseEntry 6 }
|
|
|
|
rlPethPowerPseInrushTestEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(0),
|
|
disabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies if HW inrush test will be disabled.
|
|
by default HW inrush test is enabled."
|
|
::= { rlPethPowerPseEntry 7 }
|
|
|
|
rlPethPowerPseLegacyDisabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(0),
|
|
disabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies poe Legacy global configuration mode"
|
|
::= { rlPethPowerPseEntry 8 }
|
|
|
|
rlPethPowerBanksValues OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable returns 16 power-banks of a specific switch"
|
|
::= { rlPethPowerPseEntry 9 }
|
|
|
|
rlPethPowerBanksActivePowerBank OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable returns the active power-bank of a specific switch"
|
|
::= { rlPethPowerPseEntry 10 }
|
|
|
|
END
|