mibs/MIBS/cisco/CISCOSB-rlBrgMulticast-MIB
2023-12-05 12:25:34 +01:00

683 lines
22 KiB
Plaintext

CISCOSB-rlBrgMulticast-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB Multicast Bridge Configuration
-- Version: 7.46
-- Date: 15-Jan-2007
--
IMPORTS
TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
VlanIndex,PortList FROM Q-BRIDGE-MIB
Unsigned32, IpAddress, OBJECT-TYPE,
MODULE-IDENTITY FROM SNMPv2-SMI
switch001 FROM CISCOSB-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
rlBrgMulticast MODULE-IDENTITY
LAST-UPDATED "201304010000Z" -- April 1, 2013
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The MIB module describes the private MIB for Multicast Bridge
supported by CISCOSB's software and products."
REVISION "201304010000Z" -- April 1, 2013
DESCRIPTION
"Added MODULE-IDENTITY"
::= { switch001 116 }
-- rlBrgMulticastMibVersion
rlBrgMulticastMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 4.
Snooping supports IGMPv1/v2/v3 and MLDv1/v2."
::= { rlBrgMulticast 1 }
-- rlBrgStaticIpMulticastTable (replaced by rlBrgStaticInetMulticastTable)
rlBrgStaticIpMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgStaticIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for IP Multicast
addresses for each VLAN."
::= { rlBrgMulticast 3}
rlBrgStaticIpMulticastEntry OBJECT-TYPE
SYNTAX RlBrgStaticIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device.
The set of ports to which frames containing this IP
Multicast destination address and IP source address
are allowed to be forwarded."
INDEX { rlBrgStaticIpMulticastVlanTag,
rlBrgStaticIpMulticastGroupAddress,
rlBrgStaticIpMulticastSourceAddress }
::= { rlBrgStaticIpMulticastTable 1 }
RlBrgStaticIpMulticastEntry ::= SEQUENCE {
rlBrgStaticIpMulticastVlanTag VlanIndex,
rlBrgStaticIpMulticastGroupAddress IpAddress,
rlBrgStaticIpMulticastSourceAddress IpAddress,
rlBrgStaticIpMulticastFrwPorts PortList,
rlBrgStaticIpMulticastForbiddenPorts PortList,
rlBrgStaticIpMulticastStatus RowStatus
}
rlBrgStaticIpMulticastVlanTag OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN tag for which this entry is configured."
::= { rlBrgStaticIpMulticastEntry 1}
rlBrgStaticIpMulticastGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address for which the filtering information applies "
::= { rlBrgStaticIpMulticastEntry 2}
rlBrgStaticIpMulticastSourceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unicast group address for which the filtering information applies."
::= { rlBrgStaticIpMulticastEntry 3}
rlBrgStaticIpMulticastFrwPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports the data should be forwarded to "
::= { rlBrgStaticIpMulticastEntry 4}
rlBrgStaticIpMulticastForbiddenPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports that overrides dynamic configuration and
prevents multicast data forwarding for the group or
group and source to these ports."
::= { rlBrgStaticIpMulticastEntry 5}
rlBrgStaticIpMulticastStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the table entry. It's used to add/delete an entry"
::= { rlBrgStaticIpMulticastEntry 6}
-- bridge ip multicast FDB
-- rlBrgIpMulticastTable (See rlBrgInetMulticastTable)
rlBrgIpMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing all filtering information for IP
Multicast addresses for each VLAN "
::= { rlBrgMulticast 4}
rlBrgIpMulticastEntry OBJECT-TYPE
SYNTAX RlBrgIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the rlBrgIpMulticastTable
contains IP Multicast FDB data "
INDEX { rlBrgIpMulticastVlanTag,
rlBrgIpMulticastGroupAddress,
rlBrgIpMulticastSourceAddress }
::= { rlBrgIpMulticastTable 1 }
RlBrgIpMulticastEntry ::= SEQUENCE {
rlBrgIpMulticastVlanTag VlanIndex,
rlBrgIpMulticastGroupAddress IpAddress,
rlBrgIpMulticastSourceAddress IpAddress,
rlBrgIpMulticastEgressPorts PortList,
rlBrgIpMulticastLearntPorts PortList
}
rlBrgIpMulticastVlanTag OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN tag for which this entry is configured."
::= { rlBrgIpMulticastEntry 1}
rlBrgIpMulticastGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast group address (destination address) of data frames "
::= { rlBrgIpMulticastEntry 2}
rlBrgIpMulticastSourceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of data frames."
::= { rlBrgIpMulticastEntry 3}
rlBrgIpMulticastEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports, in this VLAN, to which frames
destined for this Group IP address or Group and Source
address are currently being explicitly forwarded. This
does not include ports for which this address is only implicitly
forwarded, in the dot1qForwardAllPorts list."
::= { rlBrgIpMulticastEntry 4}
rlBrgIpMulticastLearntPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subset of ports in rlBrgIpMulticastEgressPorts which
were learnt by IGMP or some other dynamic mechanism,
in this Filtering database.."
::= { rlBrgIpMulticastEntry 5}
-- static ipm inet bridge configuration
-- rlBrgStaticInetMulticastTable IPM FDB
rlBrgStaticInetMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgStaticInetMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for INET (Pv4 and IPv6)
Multicast addresses for each VLAN."
::= { rlBrgMulticast 5}
rlBrgStaticInetMulticastEntry OBJECT-TYPE
SYNTAX RlBrgStaticInetMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device.
The set of ports to which frames containing this IP
Multicast destination address and IP source address
are allowed to be forwarded."
INDEX { rlBrgStaticInetMulticastVlanTag,
rlBrgStaticInetMulticastGroupAddressType, rlBrgStaticInetMulticastGroupAddress,
rlBrgStaticInetMulticastSourceAddressType, rlBrgStaticInetMulticastSourceAddress }
::= { rlBrgStaticInetMulticastTable 1 }
RlBrgStaticInetMulticastEntry ::= SEQUENCE {
rlBrgStaticInetMulticastVlanTag VlanIndex,
rlBrgStaticInetMulticastGroupAddressType InetAddressType,
rlBrgStaticInetMulticastGroupAddress InetAddress,
rlBrgStaticInetMulticastSourceAddressType InetAddressType,
rlBrgStaticInetMulticastSourceAddress InetAddress,
rlBrgStaticInetMulticastFrwPorts PortList,
rlBrgStaticInetMulticastForbiddenPorts PortList,
rlBrgStaticInetMulticastStatus RowStatus
}
rlBrgStaticInetMulticastVlanTag OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN tag for which this entry is configured."
::= { rlBrgStaticInetMulticastEntry 1}
rlBrgStaticInetMulticastGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inet type ipv6/ipv4."
::= { rlBrgStaticInetMulticastEntry 2}
rlBrgStaticInetMulticastGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address for which the filtering information applies "
::= { rlBrgStaticInetMulticastEntry 3}
rlBrgStaticInetMulticastSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inet type ipv6/ipv4."
::= { rlBrgStaticInetMulticastEntry 4}
rlBrgStaticInetMulticastSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unicast group address for which the filtering information applies."
::= { rlBrgStaticInetMulticastEntry 5}
rlBrgStaticInetMulticastFrwPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports the data should be forwarded to "
::= { rlBrgStaticInetMulticastEntry 6}
rlBrgStaticInetMulticastForbiddenPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports that overrides dynamic configuration and
prevents multicast data forwarding for the group or
group and source to these ports."
::= { rlBrgStaticInetMulticastEntry 7}
rlBrgStaticInetMulticastStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the table entry. It's used to add/delete an entry"
::= { rlBrgStaticInetMulticastEntry 8}
-- rlBrgInetMulticastTable IPM FDB
rlBrgInetMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgInetMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing all filtering information for IP
Multicast addresses for each VLAN "
::= { rlBrgMulticast 6}
rlBrgInetMulticastEntry OBJECT-TYPE
SYNTAX RlBrgInetMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the rlBrgInetMulticastTable
contains IP Multicast FDB data "
INDEX { rlBrgInetMulticastVlanTag,
rlBrgInetMulticastGroupAddressType, rlBrgInetMulticastGroupAddress,
rlBrgInetMulticastSourceAddressType, rlBrgInetMulticastSourceAddress }
::= { rlBrgInetMulticastTable 1 }
RlBrgInetMulticastEntry ::= SEQUENCE {
rlBrgInetMulticastVlanTag VlanIndex,
rlBrgInetMulticastGroupAddressType InetAddressType,
rlBrgInetMulticastGroupAddress InetAddress,
rlBrgInetMulticastSourceAddressType InetAddressType,
rlBrgInetMulticastSourceAddress InetAddress,
rlBrgInetMulticastEgressPorts PortList,
rlBrgInetMulticastLearntPorts PortList
}
rlBrgInetMulticastVlanTag OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN tag for which this entry is configured."
::= { rlBrgInetMulticastEntry 1}
rlBrgInetMulticastGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inet type IPv4/IPv6."
::= { rlBrgInetMulticastEntry 2}
rlBrgInetMulticastGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast group address (destination address) of data frames "
::= { rlBrgInetMulticastEntry 3}
rlBrgInetMulticastSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inet type IPv4/IPv6."
::= { rlBrgInetMulticastEntry 4}
rlBrgInetMulticastSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of data frames."
::= { rlBrgInetMulticastEntry 5}
rlBrgInetMulticastEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports, in this VLAN, to which frames
destined for this Group IP address or Group and Source
address are currently being explicitly forwarded. This
does not include ports for which this address is only implicitly
forwarded, in the dot1qForwardAllPorts list."
::= { rlBrgInetMulticastEntry 6}
rlBrgInetMulticastLearntPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subset of ports in rlBrgIpMulticastEgressPorts which
were learnt by IGMP or some other dynamic mechanism,
in this Filtering database.."
::= { rlBrgInetMulticastEntry 7}
-- IPM FDB overlapping Reference Table
rlBrgIpmFdbRefTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgIpmFdbRefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing all information stored in
IPM FDB overlapping Reference Table "
::= { rlBrgMulticast 7}
rlBrgIpmFdbRefEntry OBJECT-TYPE
SYNTAX RlBrgIpmFdbRefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the rlBrgIpmFdbRefTable
contains overlapping Reference Table FDB data "
INDEX { rlBrgIpmFdbRefVlanTag,
rlBrgIpmFdbRefGroupAddressType, rlBrgIpmFdbRefGroupAddress,
rlBrgIpmFdbRefSourceAddressType, rlBrgIpmFdbRefSourceAddress }
::= { rlBrgIpmFdbRefTable 1 }
RlBrgIpmFdbRefEntry ::= SEQUENCE {
rlBrgIpmFdbRefVlanTag VlanIndex,
rlBrgIpmFdbRefGroupAddressType InetAddressType,
rlBrgIpmFdbRefGroupAddress InetAddress,
rlBrgIpmFdbRefSourceAddressType InetAddressType,
rlBrgIpmFdbRefSourceAddress InetAddress,
rlBrgIpmFdbRefPorts PortList
}
rlBrgIpmFdbRefVlanTag OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN tag for which this entry is configured."
::= { rlBrgIpmFdbRefEntry 1}
rlBrgIpmFdbRefGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast group address (destination address) of data frames "
::= { rlBrgIpmFdbRefEntry 2}
rlBrgIpmFdbRefGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast group address (destination address) of data frames "
::= { rlBrgIpmFdbRefEntry 3}
rlBrgIpmFdbRefSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of data frames."
::= { rlBrgIpmFdbRefEntry 4}
rlBrgIpmFdbRefSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of data frames."
::= { rlBrgIpmFdbRefEntry 5}
rlBrgIpmFdbRefPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of ports represented in IPM FDB overlapping
Reference Table"
::= { rlBrgIpmFdbRefEntry 6}
-- IPM FDB Dynamic command MIB
DynamicCmdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of Dynamic IPM FDB command:
Create Entry, Delete Entry, Set ports Pset."
SYNTAX INTEGER {
createEntry(0),
deleteEntry(1),
addPorts(2),
deletePorts(3)
}
rlBrgDynamicCmdTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgDynamicCmdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table for Dynamic IPM FDB command. For debugging purposes
only. This MIB is prohibited to be used with working IGMP/MLD snooping"
::= { rlBrgMulticast 8 }
rlBrgDynamicCmdEntry OBJECT-TYPE
SYNTAX RlBrgDynamicCmdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the rlBrgDynamicCmdTable."
INDEX { rlBrgDynamicCmdKey }
::= { rlBrgDynamicCmdTable 1 }
RlBrgDynamicCmdEntry ::= SEQUENCE {
rlBrgDynamicCmdKey INTEGER,
rlBrgDynamicCmdVlanTag VlanIndex,
rlBrgDynamicCmdGroupAddressType InetAddressType,
rlBrgDynamicCmdGroupAddress InetAddress,
rlBrgDynamicCmdSourceAddressType InetAddressType,
rlBrgDynamicCmdSourceAddress InetAddress,
rlBrgDynamicCmdPorts PortList,
rlBrgDynamicCmdType DynamicCmdType
}
rlBrgDynamicCmdKey OBJECT-TYPE
SYNTAX INTEGER (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Key of the rlBrgDynamicCmdTable table"
::= { rlBrgDynamicCmdEntry 1 }
rlBrgDynamicCmdVlanTag OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN tag for which this entry is configured."
::= { rlBrgDynamicCmdEntry 2}
rlBrgDynamicCmdGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast group address (destination address) of data frames "
::= { rlBrgDynamicCmdEntry 3}
rlBrgDynamicCmdGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast group address (destination address) of data frames "
::= { rlBrgDynamicCmdEntry 4}
rlBrgDynamicCmdSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unicast source address of data frames."
::= { rlBrgDynamicCmdEntry 5}
rlBrgDynamicCmdSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unicast source address of data frames."
::= { rlBrgDynamicCmdEntry 6}
rlBrgDynamicCmdPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of ports for them the command is issued"
::= { rlBrgDynamicCmdEntry 7}
rlBrgDynamicCmdType OBJECT-TYPE
SYNTAX DynamicCmdType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current type of command"
::= { rlBrgDynamicCmdEntry 8 }
-------------------------------------------------------------------
--rlUserAssignedVidx
-------------------------------------------------------------------
rlUserAssignedVidx OBJECT IDENTIFIER ::= { rlBrgMulticast 9 }
VidxIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Values of Vidx. 0 means no free Vidx."
SYNTAX Unsigned32 (0|4096..32767)
--rlUserAssignedVidxTable
rlUserAssignedVidxConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlUserAssignedVidxConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of User Assigned Vidx configuration information"
::= { rlUserAssignedVidx 1 }
rlUserAssignedVidxConfigEntry OBJECT-TYPE
SYNTAX RlUserAssignedVidxConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry of User Assigned Vidx information table"
INDEX { rlUserAssignedVidxConfigIndex }
::= { rlUserAssignedVidxConfigTable 1 }
RlUserAssignedVidxConfigEntry::= SEQUENCE {
rlUserAssignedVidxConfigIndex VidxIndex,
rlUserAssignedVidxConfigPorts PortList,
rlUserAssignedVidxConfigRowStatus RowStatus
}
rlUserAssignedVidxConfigIndex OBJECT-TYPE
SYNTAX VidxIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vidx index. Values from 4K to 32K"
::= { rlUserAssignedVidxConfigEntry 1 }
rlUserAssignedVidxConfigPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports that belong to the Vidx"
::= { rlUserAssignedVidxConfigEntry 2 }
rlUserAssignedVidxConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { rlUserAssignedVidxConfigEntry 3 }
--rlUserAssignedVidxGetFreeIndex
rlUserAssignedVidxGetNextFreeIndex OBJECT-TYPE
SYNTAX VidxIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the next free Vidx index. Values from 4K to 32K"
::= { rlUserAssignedVidx 2 }
rlBrgMulticastCurrentNumberOfEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of multicast entries."
::= { rlBrgMulticast 10 }
END