5292 lines
204 KiB
Plaintext
5292 lines
204 KiB
Plaintext
DOCS-IF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Integer32,
|
|
Counter32,
|
|
Counter64,
|
|
TimeTicks,
|
|
IpAddress,
|
|
transmission
|
|
FROM SNMPv2-SMI -- [RFC2578]
|
|
TEXTUAL-CONVENTION,
|
|
MacAddress,
|
|
RowStatus,
|
|
TruthValue,
|
|
TimeInterval,
|
|
TimeStamp,
|
|
StorageType
|
|
FROM SNMPv2-TC -- [RFC2579]
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF -- [RFC2580]
|
|
ifIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB -- [RFC2863]
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB -- [RFC4001]
|
|
IANAifType
|
|
FROM IANAifType-MIB; -- [IANA]
|
|
|
|
docsIfMib MODULE-IDENTITY
|
|
LAST-UPDATED "200605240000Z" -- May 24, 2006
|
|
ORGANIZATION "IETF IPCDN Working Group"
|
|
CONTACT-INFO
|
|
" David Raftus
|
|
Postal: ATI Technologies Inc.
|
|
340 Terry Fox Drive, Suite 202
|
|
Ottawa Ontario
|
|
Canada
|
|
Phone: +1 613 592 1052 ext.222
|
|
E-mail: david.raftus@ati.com
|
|
|
|
Eduardo Cardona
|
|
Postal: Cable Television Laboratories, Inc.
|
|
858 Coal Creek Circle
|
|
Louisville, CO 80027-9750
|
|
U.S.A.
|
|
Phone: Tel: +1 303 661 9100
|
|
Fax: +1 303 661 9199
|
|
E-mail: e.cardona@cablelabs.com;mibs@cablelabs.com
|
|
|
|
IETF IPCDN Working Group
|
|
General Discussion: ipcdn@ietf.org
|
|
Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
|
|
Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
|
|
Co-chairs: Richard Woundy, Richard_Woundy@cable.comcast.com
|
|
Jean-Francois Mule, jf.mule@cablelabs.com"
|
|
DESCRIPTION
|
|
"This is the MIB Module for DOCSIS 2.0-compliant Radio
|
|
Frequency (RF) interfaces in Cable Modems and
|
|
Cable Modem Termination Systems.
|
|
|
|
Copyright (C) The Internet Society (2006). This
|
|
version of this MIB module is part of RFC 4546; see
|
|
the RFC itself for full legal notices."
|
|
|
|
REVISION "200605240000Z"
|
|
DESCRIPTION
|
|
"Revision of the IETF RF MIB module for DOCSIS 2.0.
|
|
This version published as RFC 4546.
|
|
This MIB module revision includes the following
|
|
among others:
|
|
Usage of ifType (205) for upstream logical channels.
|
|
Addition of downstream and upstream utilization
|
|
counters.
|
|
Additional statistics per upstream interface.
|
|
Upstream channel offline configuration mechanism.
|
|
Added MIB support for new DOCSIS 2.0 modulation
|
|
attributes.
|
|
Euro-DOCSIS downstream interleave values.
|
|
Adjustments to RFC 2670 definitions based on
|
|
the MIB review guidelines from the IETF
|
|
|
|
Operations and Management Area (OPS)."
|
|
|
|
REVISION "199908190000Z"
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 2670.
|
|
Modified by Mike St. Johns to fix problems identified by
|
|
the first pass of the MIB doctor. Of special note,
|
|
docsIfRangingResp and docsIfCmtsInsertionInterval were
|
|
obsoleted and replaced by other objects with the same
|
|
functionality, but with more appropriate syntax."
|
|
::= { transmission 127 }
|
|
|
|
-- Textual Conventions
|
|
|
|
TenthdBmV ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d-1"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type represents power levels that are normally
|
|
expressed in dBmV. Units are in tenths of a dBmV;
|
|
for example, 5.1 dBmV will be represented as 51."
|
|
SYNTAX Integer32
|
|
|
|
TenthdB ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d-1"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type represents power levels that are normally
|
|
expressed in dB. Units are in tenths of a dB;
|
|
for example, 5.1 dB will be represented as 51."
|
|
SYNTAX Integer32
|
|
|
|
DocsisVersion ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the DOCSIS Radio Frequency specification being
|
|
referenced.
|
|
'docsis10' indicates DOCSIS 1.0.
|
|
'docsis11' indicates DOCSIS 1.1.
|
|
'docsis20' indicates DOCSIS 2.0."
|
|
SYNTAX INTEGER {
|
|
docsis10 (1),
|
|
docsis11 (2),
|
|
docsis20 (3)
|
|
}
|
|
|
|
DocsisQosVersion ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the referenced quality-of-service
|
|
level.
|
|
'docsis10 refers to DOCSIS 1.0 Class of
|
|
Service queuing services, and 'docsis11' refers
|
|
to DOCSIS 1.1 Quality of Service."
|
|
SYNTAX INTEGER {
|
|
docsis10 (1),
|
|
docsis11 (2)
|
|
}
|
|
|
|
DocsisUpstreamType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the DOCSIS Upstream Channel Type.
|
|
'unknown' means information not available.
|
|
'tdma' is related to TDMA, Time Division
|
|
Multiple Access; 'atdma' is related to A-TDMA,
|
|
Advanced Time Division Multiple Access,
|
|
'scdma' is related to S-CDMA, Synchronous
|
|
Code Division Multiple Access.
|
|
'tdmaAndAtdma is related to simultaneous support of
|
|
TDMA and A-TDMA modes."
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
tdma(1),
|
|
atdma(2),
|
|
scdma(3),
|
|
tdmaAndAtdma(4)
|
|
}
|
|
|
|
DocsEqualizerData ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type represents the equalizer data
|
|
as measured at the receiver interface.
|
|
The format of the equalizer follows the structure of the
|
|
Transmit Equalization Adjust RNG-RSP TLV of DOCSIS RFI
|
|
v2.0 :
|
|
1 byte Main tap location 1..(n + m)
|
|
1 byte Number of forward taps per symbol
|
|
1 byte Number of forward taps: n
|
|
1 byte Number of reverse taps: m
|
|
|
|
Following are the equalizer coefficients:
|
|
First, forward taps coefficients:
|
|
2 bytes F1 (real), 2 bytes F1 (imag)
|
|
|
|
...
|
|
2 bytes Fn (real), 2 bytes Fn (imag)
|
|
|
|
Then, reverse taps coefficients:
|
|
2 bytes D1 (real), 2 bytes D1 (imag)
|
|
...
|
|
|
|
2 bytes Dm (real), 2 bytes Dm (imag)
|
|
|
|
The equalizer coefficients are considered signed 16-bit
|
|
integers in the range from -32768 (0x8000) to 32767
|
|
(0x7FFF).
|
|
|
|
DOCSIS specifications require up to a maximum of
|
|
64 equalizer taps (n + m); therefore, this object size
|
|
can get up 260 bytes (4 + 4x64).
|
|
The minimum object size (other than zero) for a t-spaced
|
|
tap with a minimum of 8 symbols will be 36 (4 + 4x8)."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 8-23."
|
|
SYNTAX OCTET STRING(SIZE (0 | 36..260))
|
|
|
|
docsIfMibObjects OBJECT IDENTIFIER ::= { docsIfMib 1 }
|
|
docsIfBaseObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 1 }
|
|
docsIfCmObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 2 }
|
|
docsIfCmtsObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 3 }
|
|
|
|
--
|
|
-- BASE GROUP
|
|
--
|
|
|
|
--
|
|
-- The following table is implemented on both the Cable Modem
|
|
-- and the Cable Modem Termination System. This table is
|
|
-- read only for the CM.
|
|
--
|
|
|
|
docsIfDownstreamChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfDownstreamChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the attributes of downstream
|
|
channels (frequency bands)."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-16, and 6-17."
|
|
::= { docsIfBaseObjects 1 }
|
|
|
|
docsIfDownstreamChannelEntry OBJECT-TYPE
|
|
SYNTAX DocsIfDownstreamChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry provides a list of attributes for a single
|
|
downstream channel.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableDownstream(128)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfDownstreamChannelTable 1 }
|
|
|
|
DocsIfDownstreamChannelEntry ::= SEQUENCE {
|
|
docsIfDownChannelId Integer32,
|
|
docsIfDownChannelFrequency Integer32,
|
|
docsIfDownChannelWidth Integer32,
|
|
docsIfDownChannelModulation INTEGER,
|
|
docsIfDownChannelInterleave INTEGER,
|
|
docsIfDownChannelPower TenthdBmV,
|
|
docsIfDownChannelAnnex INTEGER,
|
|
docsIfDownChannelStorageType StorageType
|
|
}
|
|
|
|
docsIfDownChannelId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Cable Modem Termination System identification of the
|
|
downstream channel within this particular MAC interface.
|
|
if the interface is down, the object returns the most
|
|
current value. If the downstream channel ID is unknown,
|
|
this object returns a value of 0."
|
|
::= { docsIfDownstreamChannelEntry 1 }
|
|
|
|
docsIfDownChannelFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The center of the downstream frequency associated with
|
|
this channel. This object will return the current tuner
|
|
|
|
frequency. If a CMTS provides IF output, this object
|
|
will return 0, unless this CMTS is in control of the
|
|
final downstream frequency. See the associated
|
|
compliance object for a description of valid frequencies
|
|
that may be written to this object."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.3.3."
|
|
::= { docsIfDownstreamChannelEntry 2 }
|
|
|
|
docsIfDownChannelWidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bandwidth of this downstream channel. Most
|
|
implementations are expected to support a channel width
|
|
of 6 MHz (North America) and/or 8 MHz (Europe). See the
|
|
associated compliance object for a description of the
|
|
valid channel widths for this object."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 6-17."
|
|
::= { docsIfDownstreamChannelEntry 3 }
|
|
|
|
docsIfDownChannelModulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
other(2),
|
|
qam64(3),
|
|
qam256(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modulation type associated with this downstream
|
|
channel. If the interface is down, this object either
|
|
returns the configured value (CMTS), the most current
|
|
value (CM), or the value of unknown(1). See the
|
|
associated conformance object for write conditions and
|
|
limitations. See the reference for specifics on the
|
|
modulation profiles implied by qam64 and qam256."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 6-17."
|
|
::= { docsIfDownstreamChannelEntry 4 }
|
|
|
|
docsIfDownChannelInterleave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
other(2),
|
|
taps8Increment16(3),
|
|
taps16Increment8(4),
|
|
taps32Increment4(5),
|
|
taps64Increment2(6),
|
|
taps128Increment1(7),
|
|
taps12increment17(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Forward Error Correction (FEC) interleaving used
|
|
for this downstream channel.
|
|
Values are defined as follows:
|
|
taps8Increment16(3): protection 5.9/4.1 usec,
|
|
latency .22/.15 msec
|
|
taps16Increment8(4): protection 12/8.2 usec,
|
|
latency .48/.33 msec
|
|
taps32Increment4(5): protection 24/16 usec,
|
|
latency .98/.68 msec
|
|
taps64Increment2(6): protection 47/33 usec,
|
|
latency 2/1.4 msec
|
|
taps128Increment1(7): protection 95/66 usec,
|
|
latency 4/2.8 msec
|
|
taps12increment17(8): protection 18/14 usec,
|
|
latency 0.43/0.32 msec
|
|
|
|
The value 'taps12increment17' is supported by EuroDOCSIS
|
|
cable systems only, and the others by DOCSIS cable systems.
|
|
|
|
If the interface is down, this object either returns
|
|
the configured value (CMTS), the most current value (CM),
|
|
or the value of unknown(1).
|
|
The value of other(2) is returned if the interleave
|
|
is known but not defined in the above list.
|
|
See the associated conformance object for write
|
|
conditions and limitations. See the reference for the FEC
|
|
configuration described by the setting of this object."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 6-15."
|
|
::= { docsIfDownstreamChannelEntry 5 }
|
|
|
|
docsIfDownChannelPower OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CMTS, the operational transmit power. At the CM,
|
|
the received power level.
|
|
If the interface is down, this object either returns
|
|
the configured value (CMTS), the most current value (CM)
|
|
or the value of 0. See the associated conformance object
|
|
for write conditions and limitations. See the reference
|
|
for recommended and required power levels."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-16, 6-17."
|
|
::= { docsIfDownstreamChannelEntry 6 }
|
|
|
|
docsIfDownChannelAnnex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
other(2),
|
|
annexA(3),
|
|
annexB(4),
|
|
annexC(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the conformance of
|
|
the implementation to important regional cable standards.
|
|
annexA : Annex A from ITU-T J.83 is used.
|
|
(equivalent to EN 300 429)
|
|
annexB : Annex B from ITU-T J.83 is used.
|
|
annexC : Annex C from ITU-T J.83 is used."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.3.1, and H.3.1."
|
|
::= { docsIfDownstreamChannelEntry 7 }
|
|
|
|
docsIfDownChannelStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Entries with this object set to permanent(4)
|
|
do not require write operations for read-write
|
|
objects."
|
|
::= { docsIfDownstreamChannelEntry 8 }
|
|
|
|
--
|
|
-- The following table is implemented on both the CM and the CMTS.
|
|
-- For the CM, only attached channels appear in the table. For the
|
|
-- CM, this table is read-only as well.
|
|
--
|
|
|
|
docsIfUpstreamChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfUpstreamChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the attributes of attached upstream
|
|
channels."
|
|
::= { docsIfBaseObjects 2 }
|
|
|
|
docsIfUpstreamChannelEntry OBJECT-TYPE
|
|
SYNTAX DocsIfUpstreamChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of attributes for a single upstream channel. For
|
|
DOCSIS 2.0 CMTSs, an entry in this table exists for
|
|
each ifEntry with an ifType of docsCableUpstreamChannel
|
|
(205).
|
|
For DOCSIS 1.x CM/CMTSs and DOCSIS 2.0 CMs, an entry in
|
|
this table exists for each ifEntry with an ifType of
|
|
docsCableUpstream (129).
|
|
|
|
For DOCSIS 2.0 CMTSs, two classes of interfaces can be
|
|
defined for this table:
|
|
o Upstream Physical Interfaces: The traditional DOCSIS
|
|
1.x CMTS upstream interface ifType 129 and the DOCSIS
|
|
2.0 ifType 205 that are functional. In other words,
|
|
interfaces that represent upstream receivers within
|
|
an RF MAC interface.
|
|
Entries of physical interfaces are exposed to the
|
|
management interface with their corresponding
|
|
ifStack hierarchy and are not administratively
|
|
created by this table.
|
|
|
|
o Upstream Temporary Interfaces: A fictitious
|
|
interface created for the purpose of manipulating
|
|
physical interface parameters offline, then
|
|
validating prior to updating the target physical
|
|
interface.
|
|
|
|
In case of a reinitialization of the managed system,
|
|
physical interfaces values persist while the temporary
|
|
interfaces are not recreated.
|
|
|
|
This mechanism helps to minimize service disruptions
|
|
originating in situations where a group of interface
|
|
parameter values need to be consistent with each other
|
|
in SET operations. A temporary buffer
|
|
(temporary interface) is provided to allow the CMTS
|
|
to validate the parameters offline."
|
|
INDEX { ifIndex }
|
|
::= { docsIfUpstreamChannelTable 1 }
|
|
|
|
DocsIfUpstreamChannelEntry ::= SEQUENCE {
|
|
docsIfUpChannelId Integer32,
|
|
docsIfUpChannelFrequency Integer32,
|
|
docsIfUpChannelWidth Integer32,
|
|
docsIfUpChannelModulationProfile Unsigned32,
|
|
docsIfUpChannelSlotSize Unsigned32,
|
|
docsIfUpChannelTxTimingOffset Unsigned32,
|
|
docsIfUpChannelRangingBackoffStart Integer32,
|
|
docsIfUpChannelRangingBackoffEnd Integer32,
|
|
docsIfUpChannelTxBackoffStart Integer32,
|
|
docsIfUpChannelTxBackoffEnd Integer32,
|
|
docsIfUpChannelScdmaActiveCodes Unsigned32,
|
|
docsIfUpChannelScdmaCodesPerSlot Integer32,
|
|
docsIfUpChannelScdmaFrameSize Unsigned32,
|
|
docsIfUpChannelScdmaHoppingSeed Unsigned32,
|
|
docsIfUpChannelType DocsisUpstreamType,
|
|
docsIfUpChannelCloneFrom InterfaceIndexOrZero,
|
|
docsIfUpChannelUpdate TruthValue,
|
|
docsIfUpChannelStatus RowStatus,
|
|
docsIfUpChannelPreEqEnable TruthValue
|
|
}
|
|
|
|
docsIfUpChannelId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CMTS identification of the upstream channel."
|
|
::= { docsIfUpstreamChannelEntry 1 }
|
|
|
|
docsIfUpChannelFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The center of the frequency band associated with this
|
|
upstream interface. This object returns 0 if the frequency
|
|
is undefined or unknown. Minimum permitted upstream
|
|
frequency is 5,000,000 Hz for current technology. See
|
|
the associated conformance object for write conditions
|
|
and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 4-2."
|
|
::= { docsIfUpstreamChannelEntry 2 }
|
|
|
|
docsIfUpChannelWidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..64000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bandwidth of this upstream interface. This object
|
|
returns 0 if the interface width is undefined or unknown.
|
|
Minimum permitted interface width is currently 200,000 Hz.
|
|
See the associated conformance object for write conditions
|
|
and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 6-5."
|
|
::= { docsIfUpstreamChannelEntry 3 }
|
|
|
|
docsIfUpChannelModulationProfile OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry identical to the docsIfModIndex in the
|
|
docsIfCmtsModulationTable that describes this channel.
|
|
This channel is further instantiated there by a grouping
|
|
of interval usage codes (IUCs) that, together, fully
|
|
describe the channel modulation. This object returns 0 if
|
|
the docsIfCmtsModulationTable entry does not exist or is
|
|
empty. See the associated conformance object for write
|
|
conditions and limitations.
|
|
|
|
Setting this object returns an 'inconsistentValue'
|
|
error if the following conditions are not satisfied:
|
|
1. All the IUC entries in the selected modulation profile
|
|
MUST have the same value of docsIfCmtsModChannelType.
|
|
2. All of the Modulation parameters in the selected
|
|
modulation profile MUST be consistent with the other
|
|
parameters in this docsIfUpstreamChannelEntry."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 8-19."
|
|
::= { docsIfUpstreamChannelEntry 4 }
|
|
|
|
docsIfUpChannelSlotSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "ticks"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applicable to TDMA and ATDMA channel types only.
|
|
The number of 6.25 microsecond ticks in each upstream
|
|
mini-slot. Returns zero if the value is undefined or
|
|
unknown or in case of an SCDMA channel.
|
|
See the associated conformance object for write
|
|
conditions and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.1.2.4."
|
|
::= { docsIfUpstreamChannelEntry 5 }
|
|
|
|
docsIfUpChannelTxTimingOffset OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CM, a measure of the current round trip time
|
|
obtained from the ranging offset (initial ranging offset +
|
|
ranging offset adjustments).
|
|
At the CMTS, the maximum of timing offset, among all the
|
|
CMs that are/were present on the channel, taking into
|
|
account all ( initial + periodic ) timing offset
|
|
corrections that were sent for each of the CMs. Generally,
|
|
these measurements are positive, but if the measurements
|
|
are negative, the value of this object is zero. Used for
|
|
timing of CM upstream transmissions to ensure synchronized
|
|
arrivals at the CMTS.
|
|
Units are one 64th fraction of 6.25 microseconds."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.19."
|
|
::= { docsIfUpstreamChannelEntry 6 }
|
|
|
|
docsIfUpChannelRangingBackoffStart OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initial random backoff window to use when retrying
|
|
Ranging Requests. Expressed as a power of 2. A value of
|
|
16 at the CMTS indicates that a proprietary adaptive retry
|
|
mechanism is to be used. See the associated conformance
|
|
object for write conditions and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 8.3.4, and 9.4."
|
|
::= { docsIfUpstreamChannelEntry 7 }
|
|
|
|
docsIfUpChannelRangingBackoffEnd OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The final random backoff window to use when retrying
|
|
Ranging Requests. Expressed as a power of 2. A value of
|
|
16 at the CMTS indicates that a proprietary adaptive retry
|
|
mechanism is to be used. See the associated conformance
|
|
object for write conditions and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.4, and 9.4."
|
|
::= { docsIfUpstreamChannelEntry 8 }
|
|
|
|
docsIfUpChannelTxBackoffStart OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initial random backoff window to use when retrying
|
|
transmissions. Expressed as a power of 2. A value of 16
|
|
at the CMTS indicates that a proprietary adaptive retry
|
|
mechanism is to be used. See the associated conformance
|
|
object for write conditions and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.4, and 9.4."
|
|
::= { docsIfUpstreamChannelEntry 9 }
|
|
|
|
docsIfUpChannelTxBackoffEnd OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The final random backoff window to use when retrying
|
|
transmissions. Expressed as a power of 2. A value of 16
|
|
at the CMTS indicates that a proprietary adaptive retry
|
|
mechanism is to be used. See the associated conformance
|
|
object for write conditions and limitations."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.4, and 9.4."
|
|
::= { docsIfUpstreamChannelEntry 10 }
|
|
|
|
docsIfUpChannelScdmaActiveCodes OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|64..66|68..70|72|74..78|80..82|84..88
|
|
|90..96|98..100|102|104..106|108
|
|
|110..112|114..126|128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applicable for SCDMA channel types only.
|
|
Number of active codes. Returns zero for
|
|
Non-SCDMA channel types. Note that legal
|
|
values from 64..128 MUST be non-prime."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.11.2.1."
|
|
::= { docsIfUpstreamChannelEntry 11 }
|
|
|
|
docsIfUpChannelScdmaCodesPerSlot OBJECT-TYPE
|
|
SYNTAX Integer32(0 | 2..32)
|
|
UNITS "codesperMinislots"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applicable for SCDMA channel types only.
|
|
The number of SCDMA codes per mini-slot.
|
|
Returns zero if the value is undefined or unknown or in
|
|
|
|
case of a TDMA or ATDMA channel."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.11.2.1."
|
|
::= { docsIfUpstreamChannelEntry 12 }
|
|
|
|
docsIfUpChannelScdmaFrameSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32)
|
|
UNITS "spreadIntervals"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applicable for SCDMA channel types only.
|
|
SCDMA Frame size in units of spreading intervals.
|
|
This value returns zero for non-SCDMA Profiles."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.12."
|
|
::= { docsIfUpstreamChannelEntry 13 }
|
|
|
|
docsIfUpChannelScdmaHoppingSeed OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applicable for SCDMA channel types only.
|
|
15-bit seed used for code hopping sequence initialization.
|
|
Returns zero for non-SCDMA channel types.
|
|
Setting this value to a value different than zero for
|
|
non-SCDMA channel types returns the error 'wrongValue'."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.14.1."
|
|
::= { docsIfUpstreamChannelEntry 14 }
|
|
|
|
docsIfUpChannelType OBJECT-TYPE
|
|
SYNTAX DocsisUpstreamType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reflects the Upstream channel type.
|
|
This object returns the value of docsIfCmtsModChannelType
|
|
for the modulation profile selected in
|
|
docsIfUpChannelModulationProfile for this row."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.1."
|
|
::= { docsIfUpstreamChannelEntry 15 }
|
|
|
|
docsIfUpChannelCloneFrom OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the ifIndex value of the physical
|
|
interface row entry whose parameters are to be adjusted.
|
|
|
|
Upon setting this object to the ifIndex value of a
|
|
physical interface, the following interface objects values
|
|
are copied to this entry:
|
|
docsIfUpChannelFrequency,
|
|
docsIfUpChannelWidth,
|
|
docsIfUpChannelModulationProfile,
|
|
docsIfUpChannelSlotSize,
|
|
docsIfUpChannelRangingBackoffStart,
|
|
docsIfUpChannelRangingBackoffEnd,
|
|
docsIfUpChannelTxBackoffStart,
|
|
docsIfUpChannelTxBackoffEnd,
|
|
docsIfUpChannelScdmaActiveCodes,
|
|
docsIfUpChannelScdmaCodesPerSlot,
|
|
docsIfUpChannelScdmaFrameSize,
|
|
docsIfUpChannelScdmaHoppingSeed,
|
|
docsIfUpChannelType, and
|
|
docsIfUpChannelPreEqEnable
|
|
Setting this object to the value of a non-existent or
|
|
a temporary upstream interface returns the error
|
|
'wrongValue'.
|
|
This object MUST contain a value of zero for physical
|
|
interfaces entries.
|
|
Setting this object in row entries that correspond to
|
|
physical interfaces returns the error 'wrongValue'."
|
|
::= { docsIfUpstreamChannelEntry 16 }
|
|
|
|
docsIfUpChannelUpdate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to perform the copy of adjusted parameters from the
|
|
temporary interface entry to the physical interface
|
|
indicated by the docsIfUpChannelCloneFrom object. The
|
|
transfer is initiated through an SNMP SET to 'true' of
|
|
|
|
this object.
|
|
A SET to 'true' fails and returns error 'commitFailed'
|
|
if docsIfUpChannelStatus value is 'notInService', which
|
|
means that the interface parameters values are not
|
|
compatible with each other or have not been validated yet.
|
|
Reading this object always returns 'false'."
|
|
::= { docsIfUpstreamChannelEntry 17 }
|
|
|
|
docsIfUpChannelStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is only used for the creation of a temporary
|
|
upstream row with the purpose of updating the parameters
|
|
of a physical upstream channel entry.
|
|
|
|
The following restrictions apply to this object:
|
|
1. This object is not writable for physical interfaces.
|
|
2. Temporary interface entries are only created by a SET
|
|
of this object to createandWait(5).
|
|
3. ifAdminStatus from the Interface MIB RFC 2863 is used
|
|
to take a physical upstream channel offline, to be
|
|
consistent with DOCSIS 1.x operation, as indicated in
|
|
RFC 2670.
|
|
In addition,
|
|
o ifAdminStatus 'down' is reflected in this object
|
|
as 'notInService'.
|
|
o ifOperStatus 'down' while ifAdminStatus 'up' is
|
|
reflected in this object as 'notInservice'.
|
|
4. Temporary created rows MUST be set to 'active' with
|
|
the purpose of validating upstream parameter
|
|
consistency prior to transferring the parameters to the
|
|
physical interface.
|
|
|
|
Below is a mandatory procedure for adjusting the values
|
|
of a physical interface:
|
|
1. Create a temporary interface entry through an SNMP SET
|
|
using 'createAndWait'. At this point, the RowStatus
|
|
reports 'notReady'.
|
|
The Manager entity uses an ifIndex value outside the
|
|
operational range of the physical interfaces for the
|
|
creation of a temporary interface.
|
|
2. Set the docsIfUpChannelCloneFrom object to the ifIndex
|
|
value of the physical row to update. Now
|
|
docsIfUpChannelStatus reports 'notInService'.
|
|
3. Change the upstream parameters to the desired values
|
|
in the temporary row.
|
|
|
|
4. Validate that all parameters are consistent by setting
|
|
docsIfUpChannelStatus to 'active'. A failure to set the
|
|
RowStatus to 'active' returns the error 'commitFailed',
|
|
which means the parameters are not compatible with the
|
|
target physical interface.
|
|
5. With docsIfUpChannelStatus 'active', transfer the
|
|
parameters to the target physical interface by setting
|
|
the object docsIfUpChannelUpdate to 'true'.
|
|
6. Delete the temporary row by setting
|
|
docsIfUpChannelStatus to 'destroy'."
|
|
::= { docsIfUpstreamChannelEntry 18 }
|
|
|
|
docsIfUpChannelPreEqEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CMTS, this object is used to enable or disable
|
|
pre-equalization on the upstream channel represented by
|
|
this table instance. At the CM, this object is read-only
|
|
and reflects the status of pre-equalization as represented
|
|
in the RNG-RSP. Pre-equalization is considered enabled at
|
|
the CM if a RNG-RSP with pre-equalization data has been
|
|
received at least once since the last mac
|
|
reinitialization."
|
|
DEFVAL {false}
|
|
::= { docsIfUpstreamChannelEntry 19 }
|
|
|
|
-- The following table describes the attributes of each class of
|
|
-- service. The entries in this table are referenced from the
|
|
-- docsIfServiceEntries. They exist as a separate table in order to
|
|
-- reduce redundant information in docsIfServiceTable.
|
|
--
|
|
-- This table is implemented at both the CM and the CMTS.
|
|
-- The CM need only maintain entries for the classes of service
|
|
-- referenced by its docsIfCmServiceTable.
|
|
--
|
|
|
|
docsIfQosProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfQosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes for each class of service."
|
|
::= { docsIfBaseObjects 3 }
|
|
|
|
docsIfQosProfileEntry OBJECT-TYPE
|
|
SYNTAX DocsIfQosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes for a single class of service.
|
|
If implemented as read-create in the Cable Modem
|
|
Termination System, creation of entries in this table is
|
|
controlled by the value of
|
|
docsIfCmtsQosProfilePermissions.
|
|
|
|
If implemented as read-only, entries are created based
|
|
on information in REG-REQ MAC messages received from
|
|
cable modems (for Cable Modem Termination System), or
|
|
based on information extracted from the TFTP option file
|
|
(for Cable Modem).
|
|
In the Cable Modem Termination System, read-only entries
|
|
are removed if no longer referenced by
|
|
docsIfCmtsServiceTable.
|
|
|
|
An entry in this table MUST not be removed while it is
|
|
referenced by an entry in docsIfCmServiceTable (Cable
|
|
Modem) or docsIfCmtsServiceTable (Cable Modem Termination
|
|
System).
|
|
|
|
An entry in this table SHOULD NOT be changeable while
|
|
it is referenced by an entry in docsIfCmtsServiceTable.
|
|
|
|
If this table is created automatically, there SHOULD only
|
|
be a single entry for each Class of Service. Multiple
|
|
entries with the same Class of Service parameters are NOT
|
|
RECOMMENDED."
|
|
INDEX { docsIfQosProfIndex }
|
|
::= { docsIfQosProfileTable 1 }
|
|
|
|
DocsIfQosProfileEntry ::= SEQUENCE {
|
|
docsIfQosProfIndex Integer32,
|
|
docsIfQosProfPriority Integer32,
|
|
docsIfQosProfMaxUpBandwidth Integer32,
|
|
docsIfQosProfGuarUpBandwidth Integer32,
|
|
docsIfQosProfMaxDownBandwidth Integer32,
|
|
docsIfQosProfMaxTxBurst Integer32, -- deprecated
|
|
docsIfQosProfBaselinePrivacy TruthValue,
|
|
docsIfQosProfStatus RowStatus,
|
|
docsIfQosProfMaxTransmitBurst Integer32,
|
|
docsIfQosProfStorageType StorageType
|
|
}
|
|
|
|
docsIfQosProfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16383)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value that uniquely identifies an entry
|
|
in the docsIfQosProfileTable."
|
|
::= { docsIfQosProfileEntry 1 }
|
|
|
|
docsIfQosProfPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A relative priority assigned to this service when
|
|
allocating bandwidth. Zero indicates lowest priority
|
|
and seven indicates highest priority.
|
|
Interpretation of priority is device-specific.
|
|
MUST NOT be changed while this row is active."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex C.1.1.4."
|
|
DEFVAL { 0 }
|
|
::= { docsIfQosProfileEntry 2 }
|
|
|
|
docsIfQosProfMaxUpBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100000000)
|
|
UNITS "bits per second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum upstream bandwidth, in bits per second,
|
|
allowed for a service with this service class.
|
|
Zero if there is no restriction of upstream bandwidth.
|
|
MUST NOT be changed while this row is active."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex C.1.1.4."
|
|
DEFVAL { 0 }
|
|
::= { docsIfQosProfileEntry 3 }
|
|
|
|
docsIfQosProfGuarUpBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100000000)
|
|
UNITS "bits per second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum guaranteed upstream bandwidth, in bits per second,
|
|
allowed for a service with this service class.
|
|
MUST NOT be changed while this row is active."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex C.1.1.4."
|
|
DEFVAL { 0 }
|
|
::= { docsIfQosProfileEntry 4 }
|
|
|
|
docsIfQosProfMaxDownBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100000000)
|
|
UNITS "bits per second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum downstream bandwidth, in bits per second,
|
|
allowed for a service with this service class.
|
|
Zero if there is no restriction of downstream bandwidth.
|
|
MUST NOT be changed while this row is active."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex C.1.1.4."
|
|
DEFVAL { 0 }
|
|
::= { docsIfQosProfileEntry 5 }
|
|
|
|
docsIfQosProfMaxTxBurst OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The maximum number of mini-slots that may be requested
|
|
for a single upstream transmission.
|
|
A value of zero means there is no limit.
|
|
MUST NOT be changed while this row is active.
|
|
This object has been deprecated and replaced by
|
|
docsIfQosProfMaxTransmitBurst, to fix a mismatch
|
|
of the units and value range with respect to the DOCSIS
|
|
Maximum Upstream Channel Transmit Burst Configuration
|
|
Setting."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
C.1.1.4."
|
|
DEFVAL { 0 }
|
|
::= { docsIfQosProfileEntry 6 }
|
|
|
|
docsIfQosProfBaselinePrivacy OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Baseline Privacy is enabled for this
|
|
service class.
|
|
MUST NOT be changed while this row is active."
|
|
DEFVAL { false }
|
|
::= { docsIfQosProfileEntry 7 }
|
|
|
|
docsIfQosProfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is object is used to create or delete rows in
|
|
this table. This object MUST NOT be changed from active
|
|
while the row is referenced by any entry in either
|
|
docsIfCmServiceTable (on the CM) or
|
|
docsIfCmtsServiceTable (on the CMTS)."
|
|
::= { docsIfQosProfileEntry 8 }
|
|
|
|
docsIfQosProfMaxTransmitBurst OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of bytes that may be requested for a
|
|
single upstream transmission. A value of zero means there
|
|
is no limit. Note: This value does not include any
|
|
physical layer overhead.
|
|
MUST NOT be changed while this row is active."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex C.1.1.4."
|
|
DEFVAL { 0 }
|
|
::= { docsIfQosProfileEntry 9 }
|
|
|
|
docsIfQosProfStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Entries with this object set to permanent(4)
|
|
|
|
do not require write operations for writable
|
|
objects."
|
|
::= { docsIfQosProfileEntry 10 }
|
|
|
|
docsIfSignalQualityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfSignalQualityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CM, describes the PHY signal quality of downstream
|
|
channels. At the CMTS, this object describes the PHY
|
|
signal quality of upstream channels. At the CMTS, this
|
|
table MAY exclude contention intervals."
|
|
::= { docsIfBaseObjects 4 }
|
|
|
|
docsIfSignalQualityEntry OBJECT-TYPE
|
|
SYNTAX DocsIfSignalQualityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CM, this object describes the PHY characteristics of
|
|
a downstream channel. At the CMTS, it describes the PHY
|
|
signal quality of an upstream channel.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableDownstream(128) for Cable Modems.
|
|
For DOCSIS 1.1 Cable Modem Termination Systems, an entry
|
|
exists for each ifEntry with an ifType of
|
|
docsCableUpstream (129).
|
|
For DOCSIS 2.0 Cable Modem Termination Systems, an entry
|
|
exists for each ifEntry with an ifType of
|
|
docsCableUpstreamChannel (205)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfSignalQualityTable 1 }
|
|
|
|
DocsIfSignalQualityEntry ::= SEQUENCE {
|
|
docsIfSigQIncludesContention TruthValue,
|
|
docsIfSigQUnerroreds Counter32,
|
|
docsIfSigQCorrecteds Counter32,
|
|
docsIfSigQUncorrectables Counter32,
|
|
docsIfSigQSignalNoise TenthdB,
|
|
docsIfSigQMicroreflections Integer32,
|
|
docsIfSigQEqualizationData DocsEqualizerData,
|
|
docsIfSigQExtUnerroreds Counter64,
|
|
docsIfSigQExtCorrecteds Counter64,
|
|
docsIfSigQExtUncorrectables Counter64
|
|
}
|
|
|
|
docsIfSigQIncludesContention OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"true(1) if this CMTS includes contention intervals in
|
|
the counters in this table. Always false(2) for CMs."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4.1"
|
|
::= { docsIfSignalQualityEntry 1 }
|
|
|
|
docsIfSigQUnerroreds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel without error.
|
|
This includes all codewords, whether or not they
|
|
were part of frames destined for this device.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.2.4, and 6.3.6."
|
|
::= { docsIfSignalQualityEntry 2 }
|
|
|
|
docsIfSigQCorrecteds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel with correctable
|
|
errors. This includes all codewords, whether or not
|
|
they were part of frames destined for this device.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.2.4, and 6.3.6."
|
|
::= { docsIfSignalQualityEntry 3 }
|
|
|
|
docsIfSigQUncorrectables OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel with uncorrectable
|
|
errors. This includes all codewords, whether or not
|
|
they were part of frames destined for this device.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.2.4, and 6.3.6."
|
|
::= { docsIfSignalQualityEntry 4 }
|
|
|
|
docsIfSigQSignalNoise OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "TenthdB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal/Noise ratio as perceived for this channel.
|
|
At the CM, this object describes the Signal/Noise of the
|
|
downstream channel. At the CMTS, it describes the
|
|
average Signal/Noise of the upstream channel."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 4-1 and 4-2"
|
|
::= { docsIfSignalQualityEntry 5 }
|
|
|
|
docsIfSigQMicroreflections OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "-dBc"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Microreflections, including in-channel response
|
|
as perceived on this interface, measured in dBc below
|
|
the signal level.
|
|
This object is not assumed to return an absolutely
|
|
accurate value, but it gives a rough indication
|
|
|
|
of microreflections received on this interface.
|
|
It is up to the implementer to provide information
|
|
as accurately as possible."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 4-1 and 4-2"
|
|
::= { docsIfSignalQualityEntry 6 }
|
|
|
|
docsIfSigQEqualizationData OBJECT-TYPE
|
|
SYNTAX DocsEqualizerData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CM, this object returns the equalization data for
|
|
the downstream channel.
|
|
|
|
At the CMTS, this object is not applicable and is not
|
|
instantiated. Note that previous CMTS implementations
|
|
may instantiate this object in two ways:
|
|
- An equalization value indicating an equalization
|
|
average for the upstream channel. Those values have
|
|
vendor-dependent interpretations.
|
|
- Return a zero-length OCTET STRING to indicate that
|
|
the value is unknown or if there is no equalization
|
|
data available or defined."
|
|
REFERENCE
|
|
"DOCSIS Radio Frequency Interface Specification,
|
|
Figure 6-23."
|
|
::= { docsIfSignalQualityEntry 7 }
|
|
|
|
docsIfSigQExtUnerroreds OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel without error.
|
|
This includes all codewords, whether or not they
|
|
were part of frames destined for this device.
|
|
This is the 64-bit version of docsIfSigQUnerroreds.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.2.4, and 6.3.6."
|
|
::= { docsIfSignalQualityEntry 8 }
|
|
|
|
docsIfSigQExtCorrecteds OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel with correctable
|
|
errors. This includes all codewords, whether or not
|
|
they were part of frames destined for this device.
|
|
This is the 64-bit version of docsIfSigQCorrecteds.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.2.4, and 6.3.6."
|
|
::= { docsIfSignalQualityEntry 9 }
|
|
|
|
docsIfSigQExtUncorrectables OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel with uncorrectable
|
|
errors. This includes all codewords, whether or not
|
|
they were part of frames destined for this device.
|
|
This is the 64-bit version of docsIfSigQUncorrectables.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Sections 6.2.4, 6.3.6."
|
|
::= { docsIfSignalQualityEntry 10 }
|
|
|
|
--
|
|
-- DOCSIS Version of the device
|
|
--
|
|
|
|
docsIfDocsisBaseCapability OBJECT-TYPE
|
|
SYNTAX DocsisVersion
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of the DOCSIS capability of the device."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex G."
|
|
::= { docsIfBaseObjects 5 }
|
|
|
|
--
|
|
-- CABLE MODEM GROUP
|
|
--
|
|
|
|
--
|
|
-- The CM MAC Table
|
|
--
|
|
|
|
docsIfCmMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes of each CM MAC interface,
|
|
extending the information available from ifEntry."
|
|
::= { docsIfCmObjects 1 }
|
|
|
|
docsIfCmMacEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing objects describing attributes of
|
|
each MAC entry, extending the information in ifEntry.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableMaclayer(127)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfCmMacTable 1 }
|
|
|
|
DocsIfCmMacEntry ::= SEQUENCE {
|
|
docsIfCmCmtsAddress MacAddress,
|
|
docsIfCmCapabilities BITS,
|
|
docsIfCmRangingRespTimeout TimeTicks,
|
|
docsIfCmRangingTimeout TimeInterval
|
|
}
|
|
|
|
docsIfCmCmtsAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the CMTS that is believed to control this MAC
|
|
domain. At the CM, this will be the source address from
|
|
SYNC, MAP, and other MAC-layer messages. If the CMTS is
|
|
unknown, returns 00-00-00-00-00-00."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.2.2."
|
|
::= { docsIfCmMacEntry 1 }
|
|
|
|
docsIfCmCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
atmCells(0),
|
|
concatenation(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the capabilities of the MAC implementation
|
|
at this interface. Note that packet transmission is
|
|
always supported. Therefore, there is no specific bit
|
|
required to explicitly indicate this capability.
|
|
Note that BITS objects are encoded most significant bit
|
|
first. For example, if bit 1 is set, the value of this
|
|
object is the octet string '40'H."
|
|
::= { docsIfCmMacEntry 2 }
|
|
|
|
docsIfCmRangingRespTimeout OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Waiting time for a Ranging Response packet.
|
|
This object has been obsoleted and replaced by
|
|
docsIfCmRangingTimeout to correct the typing to
|
|
TimeInterval."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.1.6."
|
|
DEFVAL { 20 }
|
|
::= { docsIfCmMacEntry 3 }
|
|
|
|
docsIfCmRangingTimeout OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
UNITS "HundredOfSeconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting time for a Ranging Response packet.
|
|
This object MUST NOT persist at reinitialization
|
|
of the managed system."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.1.6, timer T3."
|
|
DEFVAL { 20 }
|
|
::= { docsIfCmMacEntry 4 }
|
|
|
|
--
|
|
-- CM status table.
|
|
-- This table is implemented only at the CM.
|
|
--
|
|
|
|
docsIfCmStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maintains a number of status objects
|
|
and counters for Cable Modems."
|
|
::= { docsIfCmObjects 2 }
|
|
|
|
docsIfCmStatusEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of status objects and counters for a single MAC
|
|
layer instance in Cable Modem.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableMaclayer(127)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfCmStatusTable 1 }
|
|
|
|
DocsIfCmStatusEntry ::= SEQUENCE {
|
|
docsIfCmStatusValue INTEGER,
|
|
docsIfCmStatusCode OCTET STRING,
|
|
docsIfCmStatusTxPower TenthdBmV,
|
|
docsIfCmStatusResets Counter32,
|
|
docsIfCmStatusLostSyncs Counter32,
|
|
docsIfCmStatusInvalidMaps Counter32,
|
|
docsIfCmStatusInvalidUcds Counter32,
|
|
docsIfCmStatusInvalidRangingResponses Counter32,
|
|
docsIfCmStatusInvalidRegistrationResponses Counter32,
|
|
docsIfCmStatusT1Timeouts Counter32,
|
|
docsIfCmStatusT2Timeouts Counter32,
|
|
docsIfCmStatusT3Timeouts Counter32,
|
|
docsIfCmStatusT4Timeouts Counter32,
|
|
docsIfCmStatusRangingAborteds Counter32,
|
|
docsIfCmStatusDocsisOperMode DocsisQosVersion,
|
|
docsIfCmStatusModulationType DocsisUpstreamType,
|
|
docsIfCmStatusEqualizationData DocsEqualizerData,
|
|
docsIfCmStatusUCCs Counter32,
|
|
docsIfCmStatusUCCFails Counter32
|
|
}
|
|
|
|
docsIfCmStatusValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
notReady(2),
|
|
notSynchronized(3),
|
|
phySynchronized(4),
|
|
usParametersAcquired(5),
|
|
rangingComplete(6),
|
|
ipComplete(7),
|
|
todEstablished(8),
|
|
securityEstablished(9),
|
|
paramTransferComplete(10),
|
|
registrationComplete(11),
|
|
operational(12),
|
|
accessDenied(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Cable Modem connectivity state, as specified
|
|
in the RF Interface Specification. Interpretations for
|
|
state values 1-12 are clearly outlined in the SP-RFI
|
|
reference given below.
|
|
The state value accessDenied(13) indicates the CMTS has
|
|
sent a Registration Aborted message to the CM. The same
|
|
state is reported as accessDenied(7) by the CMTS object
|
|
docsIfCmtsCmStatusValue."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 11.2.
|
|
Data-Over-Cable Service Interface Specifications:
|
|
|
|
Operations Support System Interface Specification
|
|
SP-OSSIv2.0-I09-050812, Section 6.3.4.2."
|
|
::= { docsIfCmStatusEntry 1 }
|
|
|
|
docsIfCmStatusCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE( 0 | 5 | 6 ))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status code for a Cable Modem as defined in the
|
|
OSSI Specification. The status code consists
|
|
of a single character indicating error groups, followed
|
|
by a two- or three-digit number indicating the status
|
|
condition, followed by a decimal.
|
|
An example of a returned value could be 'T101.0'.
|
|
The zero-length OCTET STRING indicates no status code yet
|
|
registered."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications:
|
|
Operations Support System Interface Specification
|
|
SP-OSSIv2.0-I09-050812, Annex D."
|
|
::= { docsIfCmStatusEntry 2 }
|
|
|
|
docsIfCmStatusTxPower OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "TenthdBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational transmit power for the attached upstream
|
|
channel."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.18."
|
|
::= { docsIfCmStatusEntry 3 }
|
|
|
|
docsIfCmStatusResets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "resets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the CM reset or initialized this
|
|
interface.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmStatusEntry 4 }
|
|
|
|
docsIfCmStatusLostSyncs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the CM lost synchronization with
|
|
the downstream channel.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.2."
|
|
::= { docsIfCmStatusEntry 5 }
|
|
|
|
docsIfCmStatusInvalidMaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "maps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the CM received invalid MAP messages.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.4."
|
|
::= { docsIfCmStatusEntry 6 }
|
|
|
|
docsIfCmStatusInvalidUcds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the CM received invalid UCD messages.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.3."
|
|
::= { docsIfCmStatusEntry 7 }
|
|
|
|
docsIfCmStatusInvalidRangingResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the CM received invalid ranging response
|
|
messages.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.6."
|
|
::= { docsIfCmStatusEntry 8 }
|
|
|
|
docsIfCmStatusInvalidRegistrationResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the CM received invalid registration
|
|
response messages.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.8."
|
|
::= { docsIfCmStatusEntry 9 }
|
|
|
|
docsIfCmStatusT1Timeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times counter T1 expired in the CM.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 9-2."
|
|
::= { docsIfCmStatusEntry 10 }
|
|
|
|
docsIfCmStatusT2Timeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times counter T2 expired in the CM.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 9-2."
|
|
::= { docsIfCmStatusEntry 11 }
|
|
|
|
docsIfCmStatusT3Timeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times counter T3 expired in the CM.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 9-2."
|
|
::= { docsIfCmStatusEntry 12 }
|
|
|
|
docsIfCmStatusT4Timeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times counter T4 expired in the CM.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 9-2."
|
|
::= { docsIfCmStatusEntry 13 }
|
|
|
|
docsIfCmStatusRangingAborteds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the ranging process was aborted
|
|
by the CMTS.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.3.3."
|
|
::= { docsIfCmStatusEntry 14 }
|
|
|
|
docsIfCmStatusDocsisOperMode OBJECT-TYPE
|
|
SYNTAX DocsisQosVersion
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of whether the device has registered using 1.0
|
|
Class of Service or 1.1 Quality of Service.
|
|
An unregistered CM SHOULD indicate 'docsis11' for a
|
|
docsIfDocsisBaseCapability value of DOCSIS 1.1/2.0. An
|
|
unregistered CM SHOULD indicate 'docsis10' for a
|
|
docsIfDocsisBaseCapability value of DOCSIS 1.0."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex G."
|
|
::= { docsIfCmStatusEntry 15 }
|
|
|
|
docsIfCmStatusModulationType OBJECT-TYPE
|
|
SYNTAX DocsisUpstreamType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates modulation type status currently used by the
|
|
CM. Since this object specifically identifies PHY mode,
|
|
the shared upstream channel type is not permitted."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.1."
|
|
::= { docsIfCmStatusEntry 16 }
|
|
|
|
docsIfCmStatusEqualizationData OBJECT-TYPE
|
|
SYNTAX DocsEqualizerData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pre-equalization data for this CM after convolution with
|
|
data indicated in the RNG-RSP. This data is valid when
|
|
docsIfUpChannelPreEqEnable is set to true."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 8-23."
|
|
::= { docsIfCmStatusEntry 17 }
|
|
|
|
docsIfCmStatusUCCs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successful Upstream Channel Change
|
|
transactions.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmStatusEntry 18 }
|
|
|
|
docsIfCmStatusUCCFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of failed Upstream Channel Change
|
|
transactions.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmStatusEntry 19 }
|
|
|
|
--
|
|
-- The Cable Modem Service Table
|
|
--
|
|
|
|
docsIfCmServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes of each upstream service queue
|
|
on a CM."
|
|
::= { docsIfCmObjects 3 }
|
|
|
|
docsIfCmServiceEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes of an upstream bandwidth service
|
|
queue.
|
|
An entry in this table exists for each Service ID.
|
|
The primary index is an ifIndex with an ifType of
|
|
docsCableMaclayer(127)."
|
|
INDEX { ifIndex, docsIfCmServiceId }
|
|
::= { docsIfCmServiceTable 1 }
|
|
|
|
DocsIfCmServiceEntry ::= SEQUENCE {
|
|
docsIfCmServiceId Integer32,
|
|
docsIfCmServiceQosProfile Integer32,
|
|
docsIfCmServiceTxSlotsImmed Counter32,
|
|
docsIfCmServiceTxSlotsDed Counter32,
|
|
docsIfCmServiceTxRetries Counter32,
|
|
docsIfCmServiceTxExceededs Counter32,
|
|
docsIfCmServiceRqRetries Counter32,
|
|
docsIfCmServiceRqExceededs Counter32,
|
|
docsIfCmServiceExtTxSlotsImmed Counter64,
|
|
docsIfCmServiceExtTxSlotsDed Counter64
|
|
|
|
}
|
|
|
|
docsIfCmServiceId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16383)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a service queue for upstream bandwidth. The
|
|
attributes of this service queue are shared between the
|
|
CM and the CMTS. The CMTS allocates upstream bandwidth
|
|
to this service queue based on requests from the CM and
|
|
on the class of service associated with this queue."
|
|
::= { docsIfCmServiceEntry 1 }
|
|
|
|
docsIfCmServiceQosProfile OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16383)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index in docsIfQosProfileTable describing the quality
|
|
of service attributes associated with this particular
|
|
service. If no associated entry in docsIfQosProfileTable
|
|
exists, this object returns a value of zero."
|
|
::= { docsIfCmServiceEntry 2 }
|
|
|
|
docsIfCmServiceTxSlotsImmed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of upstream mini-slots that have been used to
|
|
transmit data PDUs in immediate (contention) mode. This
|
|
includes only those PDUs that are presumed to have
|
|
arrived at the head-end (i.e., those that were explicitly
|
|
acknowledged). It does not include retransmission attempts
|
|
or mini-slots used by requests.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 3 }
|
|
|
|
docsIfCmServiceTxSlotsDed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of upstream mini-slots that have been used to
|
|
transmit data PDUs in dedicated mode (i.e., as a result
|
|
of a unicast Data Grant).
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 4 }
|
|
|
|
docsIfCmServiceTxRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of attempts to transmit data PDUs containing
|
|
requests for acknowledgment that did not result in
|
|
acknowledgment.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 5 }
|
|
|
|
docsIfCmServiceTxExceededs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of data PDU transmission failures due to
|
|
excessive retries without acknowledgment.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 6 }
|
|
|
|
docsIfCmServiceRqRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of attempts to transmit bandwidth requests
|
|
that did not result in acknowledgment.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 7 }
|
|
|
|
docsIfCmServiceRqExceededs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests for bandwidth that failed due to
|
|
excessive retries without acknowledgment.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 8 }
|
|
|
|
docsIfCmServiceExtTxSlotsImmed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of upstream mini-slots that have been used to
|
|
transmit data PDUs in immediate (contention) mode. This
|
|
includes only those PDUs that are presumed to have
|
|
arrived at the head-end (i.e., those that were explicitly
|
|
acknowledged). It does not include retransmission attempts
|
|
or mini-slots used by requests.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 9 }
|
|
|
|
docsIfCmServiceExtTxSlotsDed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of upstream mini-slots that have been used to
|
|
transmit data PDUs in dedicated mode (i.e., as a result
|
|
of a unicast Data Grant).
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.4."
|
|
::= { docsIfCmServiceEntry 10 }
|
|
|
|
--
|
|
-- CMTS GROUP
|
|
--
|
|
|
|
--
|
|
-- The CMTS MAC Table
|
|
--
|
|
|
|
docsIfCmtsMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes of each CMTS MAC interface,
|
|
extending the information available from ifEntry.
|
|
Mandatory for all CMTS devices."
|
|
::= { docsIfCmtsObjects 1 }
|
|
|
|
docsIfCmtsMacEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing objects describing attributes of each
|
|
MAC entry, extending the information in ifEntry.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableMaclayer(127)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfCmtsMacTable 1 }
|
|
|
|
DocsIfCmtsMacEntry ::= SEQUENCE {
|
|
docsIfCmtsCapabilities BITS,
|
|
docsIfCmtsSyncInterval Integer32,
|
|
docsIfCmtsUcdInterval Integer32,
|
|
docsIfCmtsMaxServiceIds Integer32,
|
|
docsIfCmtsInsertionInterval TimeTicks, -- Obsolete
|
|
docsIfCmtsInvitedRangingAttempts Integer32,
|
|
docsIfCmtsInsertInterval TimeInterval,
|
|
docsIfCmtsMacStorageType StorageType
|
|
}
|
|
|
|
docsIfCmtsCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
atmCells(0),
|
|
concatenation(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the capabilities of the CMTS MAC
|
|
implementation at this interface. Note that packet
|
|
transmission is always supported. Therefore, there
|
|
is no specific bit required to explicitly indicate
|
|
this capability.
|
|
Note that BITS objects are encoded most significant bit
|
|
first. For example, if bit 1 is set, the value of this
|
|
object is the octet string '40'H."
|
|
::= { docsIfCmtsMacEntry 1 }
|
|
|
|
docsIfCmtsSyncInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200)
|
|
UNITS "Milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval between CMTS transmission of successive SYNC
|
|
messages at this interface."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.3."
|
|
::= { docsIfCmtsMacEntry 2 }
|
|
|
|
docsIfCmtsUcdInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2000)
|
|
UNITS "Milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval between CMTS transmission of successive
|
|
Upstream Channel Descriptor messages for each upstream
|
|
channel at this interface."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.3"
|
|
::= { docsIfCmtsMacEntry 3 }
|
|
|
|
docsIfCmtsMaxServiceIds OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16383)
|
|
UNITS "SIDs"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of service IDs that may be
|
|
simultaneously active."
|
|
::= { docsIfCmtsMacEntry 4 }
|
|
|
|
docsIfCmtsInsertionInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The amount of time to elapse between each broadcast
|
|
initial maintenance grant. Broadcast initial maintenance
|
|
grants are used to allow new cable modems to join the
|
|
network. Zero indicates that a vendor-specific algorithm
|
|
is used instead of a fixed time. The maximum amount of
|
|
|
|
time permitted by the specification is 2 seconds.
|
|
This object has been obsoleted and replaced by
|
|
docsIfCmtsInsertInterval to fix a SYNTAX typing problem."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex B."
|
|
::= { docsIfCmtsMacEntry 5 }
|
|
|
|
docsIfCmtsInvitedRangingAttempts OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1024)
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of attempts to make on invitations
|
|
for ranging requests. A value of zero means the system
|
|
SHOULD attempt to range forever."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 9.3.3 and Annex B."
|
|
::= { docsIfCmtsMacEntry 6 }
|
|
|
|
docsIfCmtsInsertInterval OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
UNITS "HundredOfSeconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time to elapse between each broadcast
|
|
initial maintenance grant. Broadcast initial maintenance
|
|
grants are used to allow new cable modems to join the
|
|
network. Zero indicates that a vendor-specific algorithm
|
|
is used instead of a fixed time. The maximum amount of
|
|
time permitted by the specification is 2 seconds."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex B."
|
|
::= { docsIfCmtsMacEntry 7 }
|
|
|
|
docsIfCmtsMacStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
|
|
Entries with this object set to permanent(4)
|
|
do not require write operations for read-write
|
|
objects."
|
|
::= { docsIfCmtsMacEntry 8 }
|
|
|
|
--
|
|
--
|
|
-- CMTS status table.
|
|
--
|
|
|
|
docsIfCmtsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the MAC layer, this group maintains a number of
|
|
status objects and counters."
|
|
::= { docsIfCmtsObjects 2 }
|
|
|
|
docsIfCmtsStatusEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status entry for a single MAC layer.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableMaclayer(127)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfCmtsStatusTable 1 }
|
|
|
|
DocsIfCmtsStatusEntry ::= SEQUENCE {
|
|
docsIfCmtsStatusInvalidRangeReqs Counter32,
|
|
docsIfCmtsStatusRangingAborteds Counter32,
|
|
docsIfCmtsStatusInvalidRegReqs Counter32,
|
|
docsIfCmtsStatusFailedRegReqs Counter32,
|
|
docsIfCmtsStatusInvalidDataReqs Counter32,
|
|
docsIfCmtsStatusT5Timeouts Counter32
|
|
}
|
|
|
|
docsIfCmtsStatusInvalidRangeReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts invalid RNG-REQ messages received on
|
|
this interface.
|
|
Discontinuities in the value of this counter can occur
|
|
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.5."
|
|
::= { docsIfCmtsStatusEntry 1 }
|
|
|
|
docsIfCmtsStatusRangingAborteds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts ranging attempts that were explicitly
|
|
aborted by the CMTS.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.6."
|
|
::= { docsIfCmtsStatusEntry 2 }
|
|
|
|
docsIfCmtsStatusInvalidRegReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts invalid REG-REQ messages received on
|
|
this interface; that is, syntax, out of range parameters,
|
|
or erroneous requests.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.7."
|
|
::= { docsIfCmtsStatusEntry 3 }
|
|
|
|
docsIfCmtsStatusFailedRegReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts failed registration attempts. Included
|
|
are docsIfCmtsStatusInvalidRegReqs, authentication, and
|
|
class of service failures.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.3.7."
|
|
::= { docsIfCmtsStatusEntry 4 }
|
|
|
|
docsIfCmtsStatusInvalidDataReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts invalid data request messages
|
|
received on this interface.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsStatusEntry 5 }
|
|
|
|
docsIfCmtsStatusT5Timeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number of times counter T5
|
|
expired on this interface.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 9-2."
|
|
::= { docsIfCmtsStatusEntry 6 }
|
|
|
|
--
|
|
-- CM status table (within CMTS).
|
|
-- This table is implemented only at the CMTS.
|
|
-- It contains per-CM status information available in the CMTS.
|
|
--
|
|
|
|
docsIfCmtsCmStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsCmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects in the CMTS, maintained for each
|
|
cable modem connected to this CMTS."
|
|
::= { docsIfCmtsObjects 3 }
|
|
|
|
docsIfCmtsCmStatusEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsCmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status information for a single cable modem.
|
|
An entry in this table exists for each cable modem
|
|
that is connected to the CMTS implementing this table."
|
|
INDEX { docsIfCmtsCmStatusIndex }
|
|
::= { docsIfCmtsCmStatusTable 1 }
|
|
|
|
DocsIfCmtsCmStatusEntry ::= SEQUENCE {
|
|
docsIfCmtsCmStatusIndex Integer32,
|
|
docsIfCmtsCmStatusMacAddress MacAddress,
|
|
docsIfCmtsCmStatusIpAddress IpAddress, -- deprecated
|
|
docsIfCmtsCmStatusDownChannelIfIndex InterfaceIndexOrZero,
|
|
docsIfCmtsCmStatusUpChannelIfIndex InterfaceIndexOrZero,
|
|
docsIfCmtsCmStatusRxPower TenthdBmV,
|
|
docsIfCmtsCmStatusTimingOffset Unsigned32,
|
|
docsIfCmtsCmStatusEqualizationData DocsEqualizerData,
|
|
docsIfCmtsCmStatusValue INTEGER,
|
|
docsIfCmtsCmStatusUnerroreds Counter32,
|
|
docsIfCmtsCmStatusCorrecteds Counter32,
|
|
docsIfCmtsCmStatusUncorrectables Counter32,
|
|
docsIfCmtsCmStatusSignalNoise TenthdB,
|
|
docsIfCmtsCmStatusMicroreflections Integer32,
|
|
docsIfCmtsCmStatusExtUnerroreds Counter64,
|
|
docsIfCmtsCmStatusExtCorrecteds Counter64,
|
|
docsIfCmtsCmStatusExtUncorrectables Counter64,
|
|
docsIfCmtsCmStatusDocsisRegMode DocsisQosVersion,
|
|
docsIfCmtsCmStatusModulationType DocsisUpstreamType,
|
|
docsIfCmtsCmStatusInetAddressType InetAddressType,
|
|
docsIfCmtsCmStatusInetAddress InetAddress,
|
|
docsIfCmtsCmStatusValueLastUpdate TimeStamp,
|
|
docsIfCmtsCmStatusHighResolutionTimingOffset Unsigned32
|
|
}
|
|
|
|
docsIfCmtsCmStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index value to uniquely identify an entry in this table.
|
|
For an individual cable modem, this index value SHOULD
|
|
NOT change during CMTS uptime."
|
|
::= { docsIfCmtsCmStatusEntry 1 }
|
|
|
|
docsIfCmtsCmStatusMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the cable modem. If the cable modem has
|
|
multiple MAC addresses, this is the MAC address associated
|
|
with the Cable interface."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 8.2.2."
|
|
::= { docsIfCmtsCmStatusEntry 2 }
|
|
|
|
docsIfCmtsCmStatusIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"IP address of this cable modem. If the cable modem has no
|
|
IP address assigned, or the IP address is unknown, this
|
|
object returns a value of 0.0.0.0. If the cable modem has
|
|
multiple IP addresses, this object returns the IP address
|
|
associated with the Cable interface.
|
|
This object has been deprecated and replaced by
|
|
docsIfCmtsCmStatusInetAddressType and
|
|
docsIfCmtsCmStatusInetAddress, to enable IPv6 addressing
|
|
in the future."
|
|
::= { docsIfCmtsCmStatusEntry 3 }
|
|
|
|
docsIfCmtsCmStatusDownChannelIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the downstream channel that this CM is
|
|
connected to. If the downstream channel is unknown, this
|
|
object returns a value of zero."
|
|
::= { docsIfCmtsCmStatusEntry 4 }
|
|
|
|
docsIfCmtsCmStatusUpChannelIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For DOCSIS 2.0, indicates the ifIndex of the logical
|
|
upstream channel (ifType 205) this CM is connected to.
|
|
For DOCSIS 1.x, indicates the ifIndex of the upstream
|
|
channel (ifType 129) this CM is connected to.
|
|
If the upstream channel is unknown, this object
|
|
returns a value of zero."
|
|
::= { docsIfCmtsCmStatusEntry 5 }
|
|
|
|
docsIfCmtsCmStatusRxPower OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "ThenthdBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The receive power as perceived for upstream data from
|
|
this cable modem.
|
|
If the receive power is unknown, this object returns
|
|
a value of zero."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.18."
|
|
::= { docsIfCmtsCmStatusEntry 6 }
|
|
|
|
docsIfCmtsCmStatusTimingOffset OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A measure of the current round trip time for this CM.
|
|
Used for timing of CM upstream transmissions to ensure
|
|
synchronized arrivals at the CMTS. Units are in terms
|
|
of (6.25 microseconds/64). Returns zero if the value
|
|
is unknown.
|
|
For channels requiring finer resolution, please refer to
|
|
object docsIfCmtsCmStatusHighResolutionTimingOffset."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.17."
|
|
::= { docsIfCmtsCmStatusEntry 7 }
|
|
|
|
docsIfCmtsCmStatusEqualizationData OBJECT-TYPE
|
|
SYNTAX DocsEqualizerData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Equalization data for this CM, as measured by the CMTS.
|
|
Returns the zero-length OCTET STRING if the value is
|
|
unknown or if there is no equalization data available
|
|
or defined."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Figure 8-23."
|
|
::= { docsIfCmtsCmStatusEntry 8 }
|
|
|
|
docsIfCmtsCmStatusValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
ranging(2),
|
|
rangingAborted(3),
|
|
rangingComplete(4),
|
|
ipComplete(5),
|
|
registrationComplete(6),
|
|
accessDenied(7),
|
|
operational(8),
|
|
-- value 8 should not be used
|
|
registeredBPIInitializing(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current cable modem connectivity state, as specified
|
|
in the RF Interface Specification. Returned status
|
|
information is the CM status, as assumed by the CMTS,
|
|
and indicates the following events:
|
|
other(1)
|
|
Any state other than below.
|
|
ranging(2)
|
|
The CMTS has received an Initial Ranging Request
|
|
message from the CM, and the ranging process is not
|
|
yet complete.
|
|
rangingAborted(3)
|
|
The CMTS has sent a Ranging Abort message to the CM.
|
|
|
|
rangingComplete(4)
|
|
The CMTS has sent a Ranging Complete message to the CM.
|
|
ipComplete(5)
|
|
The CMTS has received a DHCP reply message and
|
|
forwarded it to the CM.
|
|
registrationComplete(6)
|
|
The CMTS has sent a Registration Response message to
|
|
the CM.
|
|
accessDenied(7)
|
|
The CMTS has sent a Registration Aborted message
|
|
to the CM.
|
|
operational(8)
|
|
Value 8 is considered reserved and should not be defined
|
|
in future revisions of this MIB module to avoid conflict
|
|
with documented implementations that support value 8 to
|
|
indicate operational state after completing the BPI
|
|
initialization process.
|
|
registeredBPIInitializing(9)
|
|
Baseline Privacy (BPI) is enabled and the CMTS is in the
|
|
process of completing BPI initialization. This state
|
|
MAY last for a significant length of time if failures
|
|
occur during the initialization process. After
|
|
completion of BPI initialization, the CMTS will report
|
|
registrationComplete(6).
|
|
The CMTS only needs to report states it is able to
|
|
detect."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 11.2."
|
|
::= { docsIfCmtsCmStatusEntry 9 }
|
|
|
|
docsIfCmtsCmStatusUnerroreds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received without error from this cable modem.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.4."
|
|
::= { docsIfCmtsCmStatusEntry 10 }
|
|
|
|
docsIfCmtsCmStatusCorrecteds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received with correctable errors from this
|
|
cable modem.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.4."
|
|
::= { docsIfCmtsCmStatusEntry 11 }
|
|
|
|
docsIfCmtsCmStatusUncorrectables OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received with uncorrectable errors from this
|
|
cable modem.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.4."
|
|
::= { docsIfCmtsCmStatusEntry 12 }
|
|
|
|
docsIfCmtsCmStatusSignalNoise OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "TenthdB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal/Noise ratio as perceived for upstream data from
|
|
this cable modem.
|
|
If the Signal/Noise is unknown, this object returns
|
|
a value of zero."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 4-1 and 4-2."
|
|
::= { docsIfCmtsCmStatusEntry 13 }
|
|
|
|
docsIfCmtsCmStatusMicroreflections OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "-dBc"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total microreflections, including in-channel response
|
|
as perceived on this interface, measured in dBc below
|
|
the signal level.
|
|
This object is not assumed to return an absolutely
|
|
accurate value, but it gives a rough indication
|
|
of microreflections received on this interface.
|
|
It is up to the implementer to provide information
|
|
as accurately as possible.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 4-1 and 4-2"
|
|
::= { docsIfCmtsCmStatusEntry 14 }
|
|
|
|
docsIfCmtsCmStatusExtUnerroreds OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received without error from this cable modem.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.5."
|
|
::= { docsIfCmtsCmStatusEntry 15 }
|
|
|
|
docsIfCmtsCmStatusExtCorrecteds OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received with correctable errors from this
|
|
cable modem.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.5."
|
|
::= { docsIfCmtsCmStatusEntry 16 }
|
|
|
|
docsIfCmtsCmStatusExtUncorrectables OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received with uncorrectable errors from this
|
|
cable modem.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.5."
|
|
::= { docsIfCmtsCmStatusEntry 17 }
|
|
|
|
docsIfCmtsCmStatusDocsisRegMode OBJECT-TYPE
|
|
SYNTAX DocsisQosVersion
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of whether the CM has registered using 1.0
|
|
Class of Service or 1.1 Quality of Service."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Annex G."
|
|
::= { docsIfCmtsCmStatusEntry 18 }
|
|
|
|
docsIfCmtsCmStatusModulationType OBJECT-TYPE
|
|
SYNTAX DocsisUpstreamType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates modulation type currently used by the CM. Since
|
|
this object specifically identifies PHY mode, the shared
|
|
type is not permitted. If the upstream channel is
|
|
unknown, this object returns a value of zero."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 8-19."
|
|
::= { docsIfCmtsCmStatusEntry 19 }
|
|
|
|
docsIfCmtsCmStatusInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of internet address of
|
|
docsIfCmtsCmStatusInetAddress. If the cable modem
|
|
internet address is unassigned or unknown, then the
|
|
value of this object is unknown(0)."
|
|
::= { docsIfCmtsCmStatusEntry 20 }
|
|
|
|
docsIfCmtsCmStatusInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internet address of this cable modem. If the Cable
|
|
Modem has no Internet address assigned, or the Internet
|
|
address is unknown, the value of this object is the
|
|
zero-length OCTET STRING. If the cable modem has
|
|
multiple Internet addresses, this object returns the
|
|
Internet address associated with the Cable
|
|
(i.e., RF MAC) interface."
|
|
::= { docsIfCmtsCmStatusEntry 21 }
|
|
|
|
docsIfCmtsCmStatusValueLastUpdate OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when docsIfCmtsCmStatusValue
|
|
was last updated."
|
|
::= { docsIfCmtsCmStatusEntry 22 }
|
|
|
|
docsIfCmtsCmStatusHighResolutionTimingOffset OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A measure of the current round trip time for this CM.
|
|
Used for timing of CM upstream transmissions to ensure
|
|
synchronized arrivals at the CMTS. Units are in terms
|
|
of (6.25 microseconds/(64*256)). Returns zero if the value
|
|
is unknown.
|
|
This is the high resolution version of object
|
|
docsIfCmtsCmStatusTimingOffset, for channels requiring
|
|
finer resolution."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Section 6.2.17."
|
|
::= { docsIfCmtsCmStatusEntry 23 }
|
|
|
|
--
|
|
-- The CMTS Service Table.
|
|
--
|
|
|
|
docsIfCmtsServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes of upstream service queues
|
|
in a Cable Modem Termination System."
|
|
::= { docsIfCmtsObjects 4 }
|
|
|
|
docsIfCmtsServiceEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the attributes of a single upstream bandwidth
|
|
service queue.
|
|
Entries in this table exist for each ifEntry with an
|
|
ifType of docsCableMaclayer(127), and for each service
|
|
queue (Service ID) within this MAC layer.
|
|
Entries in this table are created with the creation of
|
|
individual Service IDs by the MAC layer and removed
|
|
when a Service ID is removed."
|
|
INDEX { ifIndex, docsIfCmtsServiceId }
|
|
::= { docsIfCmtsServiceTable 1 }
|
|
|
|
DocsIfCmtsServiceEntry ::= SEQUENCE {
|
|
|
|
docsIfCmtsServiceId Integer32,
|
|
docsIfCmtsServiceCmStatusIndex Integer32, -- deprecated
|
|
docsIfCmtsServiceAdminStatus INTEGER,
|
|
docsIfCmtsServiceQosProfile Integer32,
|
|
docsIfCmtsServiceCreateTime TimeStamp,
|
|
docsIfCmtsServiceInOctets Counter32,
|
|
docsIfCmtsServiceInPackets Counter32,
|
|
docsIfCmtsServiceNewCmStatusIndex Integer32
|
|
}
|
|
|
|
docsIfCmtsServiceId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16383)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a service queue for upstream bandwidth. The
|
|
attributes of this service queue are shared between the
|
|
Cable Modem and the Cable Modem Termination System.
|
|
The CMTS allocates upstream bandwidth to this service
|
|
queue based on requests from the CM and on the class of
|
|
service associated with this queue."
|
|
::= { docsIfCmtsServiceEntry 1 }
|
|
|
|
docsIfCmtsServiceCmStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Pointer to an entry in docsIfCmtsCmStatusTable identifying
|
|
the cable modem using this Service Queue. If multiple
|
|
cable modems are using this Service Queue, the value of
|
|
this object is zero.
|
|
This object has been deprecated and replaced by
|
|
docsIfCmtsServiceNewCmStatusIndex, to fix a mismatch
|
|
of the value range with respect to docsIfCmtsCmStatusIndex
|
|
(1..2147483647)."
|
|
::= { docsIfCmtsServiceEntry 2 }
|
|
|
|
docsIfCmtsServiceAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
destroyed(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows a service class for a particular modem to be
|
|
suppressed, (re-)enabled, or deleted altogether."
|
|
::= { docsIfCmtsServiceEntry 3 }
|
|
|
|
docsIfCmtsServiceQosProfile OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16383)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index in docsIfQosProfileTable describing the quality
|
|
of service attributes associated with this particular
|
|
service. If no associated docsIfQosProfileTable entry
|
|
exists, this object returns a value of zero."
|
|
::= { docsIfCmtsServiceEntry 4 }
|
|
|
|
docsIfCmtsServiceCreateTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when this entry was created."
|
|
::= { docsIfCmtsServiceEntry 5 }
|
|
|
|
docsIfCmtsServiceInOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cumulative number of Packet Data octets received
|
|
on this Service ID. The count does not include the
|
|
size of the Cable MAC header.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsServiceEntry 6 }
|
|
|
|
docsIfCmtsServiceInPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cumulative number of Packet Data packets received
|
|
on this Service ID.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsServiceEntry 7 }
|
|
|
|
docsIfCmtsServiceNewCmStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pointer (via docsIfCmtsCmStatusIndex) to an entry in
|
|
docsIfCmtsCmStatusTable identifying the cable modem
|
|
using this Service Queue. If multiple cable modems are
|
|
using this Service Queue, the value of this object is
|
|
zero."
|
|
::= { docsIfCmtsServiceEntry 8 }
|
|
|
|
--
|
|
-- The following table provides upstream channel modulation profiles.
|
|
-- Entries in this table can be
|
|
-- re-used by one or more upstream channels. An upstream channel
|
|
-- will have a modulation profile for each value of
|
|
-- docsIfModIntervalUsageCode.
|
|
--
|
|
|
|
docsIfCmtsModulationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsModulationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes a modulation profile associated with one or more
|
|
upstream channels."
|
|
::= { docsIfCmtsObjects 5 }
|
|
|
|
docsIfCmtsModulationEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsModulationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes a modulation profile for an Interval Usage Code
|
|
for one or more upstream channels.
|
|
Entries in this table are created by the operator.
|
|
|
|
Initial default entries MAY be created at system
|
|
initialization time, which could report a value of
|
|
'permanent' or 'readOnly' for docsIfCmtsModStorageType.
|
|
A CMTS MAY reject the creation of additional Interval
|
|
Usage Codes for a modulation profile being defined at
|
|
Initialization time.
|
|
No individual objects have to be specified in order
|
|
to create an entry in this table.
|
|
|
|
Note that some objects do not have DEFVAL clauses
|
|
but do have calculated defaults and need not be specified
|
|
during row creation."
|
|
INDEX { docsIfCmtsModIndex, docsIfCmtsModIntervalUsageCode}
|
|
::= { docsIfCmtsModulationTable 1 }
|
|
|
|
DocsIfCmtsModulationEntry ::= SEQUENCE {
|
|
docsIfCmtsModIndex Integer32,
|
|
docsIfCmtsModIntervalUsageCode INTEGER,
|
|
docsIfCmtsModControl RowStatus,
|
|
docsIfCmtsModType INTEGER,
|
|
docsIfCmtsModPreambleLen Integer32,
|
|
docsIfCmtsModDifferentialEncoding TruthValue,
|
|
docsIfCmtsModFECErrorCorrection Integer32,
|
|
docsIfCmtsModFECCodewordLength Integer32,
|
|
docsIfCmtsModScramblerSeed Integer32,
|
|
docsIfCmtsModMaxBurstSize Integer32,
|
|
docsIfCmtsModGuardTimeSize Unsigned32,
|
|
docsIfCmtsModLastCodewordShortened TruthValue,
|
|
docsIfCmtsModScrambler TruthValue,
|
|
docsIfCmtsModByteInterleaverDepth Unsigned32,
|
|
docsIfCmtsModByteInterleaverBlockSize Unsigned32,
|
|
docsIfCmtsModPreambleType INTEGER,
|
|
docsIfCmtsModTcmErrorCorrectionOn TruthValue,
|
|
docsIfCmtsModScdmaInterleaverStepSize Unsigned32,
|
|
docsIfCmtsModScdmaSpreaderEnable TruthValue,
|
|
docsIfCmtsModScdmaSubframeCodes Unsigned32,
|
|
docsIfCmtsModChannelType DocsisUpstreamType,
|
|
docsIfCmtsModStorageType StorageType
|
|
}
|
|
|
|
docsIfCmtsModIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index into the Channel Modulation table representing
|
|
a group of Interval Usage Codes, all associated with the
|
|
same channel."
|
|
::= { docsIfCmtsModulationEntry 1 }
|
|
|
|
docsIfCmtsModIntervalUsageCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
request(1),
|
|
requestData(2),
|
|
initialRanging(3),
|
|
periodicRanging(4),
|
|
shortData(5),
|
|
longData(6),
|
|
advPhyShortData(9),
|
|
advPhyLongData(10),
|
|
ugs(11)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index into the Channel Modulation table that, when
|
|
grouped with other Interval Usage Codes, fully
|
|
instantiates all modulation sets for a given upstream
|
|
channel."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 8-20."
|
|
::= { docsIfCmtsModulationEntry 2 }
|
|
|
|
docsIfCmtsModControl OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls and reflects the status of rows in this table.
|
|
There is no restriction on the changing of values in this
|
|
table while their associated rows are active, with the
|
|
exception of:
|
|
|
|
1. If a modulation profile is being referenced by one
|
|
or more upstream channels, an attempt to set the value
|
|
of docsIfCmtsModChannelType returns an
|
|
'inconsistentValue' error.
|
|
|
|
2. If a modulation profile is being referenced by one
|
|
or more upstream channels, an attempt to set
|
|
docsIfCmtsModControl to destroy(6) or notInService(2)
|
|
returns an 'inconsistentValue' error."
|
|
::= { docsIfCmtsModulationEntry 3 }
|
|
|
|
docsIfCmtsModType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
qpsk(2),
|
|
qam16(3),
|
|
qam8(4),
|
|
qam32(5),
|
|
qam64(6),
|
|
qam128(7)
|
|
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modulation type used on this channel. Returns
|
|
other(1) if the modulation type is not
|
|
qpsk, qam16, qam8, qam32, qam64, or qam128.
|
|
Type qam128 is used for SCDMA channels only.
|
|
See the reference for the modulation profiles
|
|
implied by different modulation types."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { qpsk }
|
|
::= { docsIfCmtsModulationEntry 4 }
|
|
|
|
docsIfCmtsModPreambleLen OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1536)
|
|
UNITS "bits"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preamble length for this modulation profile in bits.
|
|
Default value is the minimum needed by the implementation
|
|
at the CMTS for the given modulation profile."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
::= { docsIfCmtsModulationEntry 5 }
|
|
|
|
docsIfCmtsModDifferentialEncoding OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not differential encoding is used
|
|
on this channel."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { false }
|
|
::= { docsIfCmtsModulationEntry 6 }
|
|
|
|
docsIfCmtsModFECErrorCorrection OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of correctable errored bytes (t) used in
|
|
forward error correction code. The value of 0 indicates
|
|
that no correction is employed. The number of check bytes
|
|
appended will be twice this value."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { 0 }
|
|
::= { docsIfCmtsModulationEntry 7 }
|
|
|
|
docsIfCmtsModFECCodewordLength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of data bytes (k) in the forward error
|
|
correction codeword.
|
|
This object is not used if docsIfCmtsModFECErrorCorrection
|
|
is zero."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { 32 }
|
|
::= { docsIfCmtsModulationEntry 8 }
|
|
|
|
docsIfCmtsModScramblerSeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15-bit seed value for the scrambler polynomial."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 8-19."
|
|
DEFVAL { 0 }
|
|
::= { docsIfCmtsModulationEntry 9 }
|
|
|
|
docsIfCmtsModMaxBurstSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of mini-slots that can be transmitted
|
|
during this channel's burst time. Returns zero if the
|
|
burst length is bounded by the allocation MAP rather than
|
|
by this profile.
|
|
Default value is 0, except for shortData, where it is 8."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 8-19."
|
|
::= { docsIfCmtsModulationEntry 10 }
|
|
|
|
docsIfCmtsModGuardTimeSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Symbol-times"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of symbol-times that MUST follow the end of
|
|
this channel's burst. Default value is the minimum time
|
|
needed by the implementation for this modulation profile."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
::= { docsIfCmtsModulationEntry 11 }
|
|
|
|
docsIfCmtsModLastCodewordShortened OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the last FEC codeword is truncated."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { true }
|
|
::= { docsIfCmtsModulationEntry 12 }
|
|
|
|
docsIfCmtsModScrambler OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the scrambler is employed."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { false }
|
|
::= { docsIfCmtsModulationEntry 13 }
|
|
|
|
docsIfCmtsModByteInterleaverDepth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATDMA Byte Interleaver Depth (Ir). This object returns 1
|
|
for non-ATDMA profiles."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { 1 }
|
|
::= { docsIfCmtsModulationEntry 14 }
|
|
|
|
docsIfCmtsModByteInterleaverBlockSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATDMA Byte Interleaver Block size (Br). This object
|
|
returns zero for non-ATDMA profiles "
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { 18 }
|
|
::= { docsIfCmtsModulationEntry 15 }
|
|
|
|
docsIfCmtsModPreambleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
qpsk0(1),
|
|
qpsk1(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preamble type for DOCSIS 2.0 bursts. The value
|
|
'unknown(0)' represents a row entry consisting only of
|
|
DOCSIS 1.x bursts"
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { qpsk0 }
|
|
::= { docsIfCmtsModulationEntry 16 }
|
|
|
|
docsIfCmtsModTcmErrorCorrectionOn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trellis Code Modulation (TCM) On/Off. This value returns
|
|
false for non-S-CDMA profiles."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { false }
|
|
::= { docsIfCmtsModulationEntry 17 }
|
|
|
|
docsIfCmtsModScdmaInterleaverStepSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 1..32)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" S-CDMA Interleaver step size. This value returns zero
|
|
for non-S-CDMA profiles."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
DEFVAL { 1 }
|
|
::= { docsIfCmtsModulationEntry 18 }
|
|
|
|
docsIfCmtsModScdmaSpreaderEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" S-CDMA spreader. This value returns false for non-S-CDMA
|
|
profiles. Default value for IUC 3 and 4 is OFF; for
|
|
all other IUCs it is ON."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Tables 6-7, and 8-19."
|
|
::= { docsIfCmtsModulationEntry 19 }
|
|
|
|
docsIfCmtsModScdmaSubframeCodes OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" S-CDMA sub-frame size. This value returns zero
|
|
for non-S-CDMA profiles."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 6-7, and 8-19."
|
|
DEFVAL { 1 }
|
|
::= { docsIfCmtsModulationEntry 20 }
|
|
|
|
docsIfCmtsModChannelType OBJECT-TYPE
|
|
SYNTAX DocsisUpstreamType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the modulation channel type for this modulation
|
|
entry.
|
|
All the active entries in a modulation profile (that is all
|
|
active entries that share a common docsIfCmtsModIndex)
|
|
MUST have the same value of docsIfCmtsModChannelType."
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Radio
|
|
Frequency Interface Specification SP-RFIv2.0-I10-051209,
|
|
Table 8-19."
|
|
DEFVAL { tdma }
|
|
::= { docsIfCmtsModulationEntry 21 }
|
|
|
|
docsIfCmtsModStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Entries with this object set to permanent(4)
|
|
do not require write operations for read-write
|
|
objects."
|
|
DEFVAL { nonVolatile }
|
|
::= { docsIfCmtsModulationEntry 22 }
|
|
|
|
docsIfCmtsQosProfilePermissions OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
createByManagement(0),
|
|
updateByManagement(1),
|
|
createByModems(2)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies permitted methods of creating
|
|
entries in docsIfQosProfileTable.
|
|
createByManagement(0) is set if entries can be created
|
|
using SNMP. updateByManagement(1) is set if updating
|
|
entries using SNMP is permitted. createByModems(2)
|
|
is set if entries can be created based on information
|
|
in REG-REQ MAC messages received from cable modems.
|
|
Information in this object is only applicable if
|
|
docsIfQosProfileTable is implemented as read-create.
|
|
Otherwise, this object is implemented as read-only
|
|
and returns createByModems(2).
|
|
Either createByManagement(0) or updateByManagement(1)
|
|
MUST be set when writing to this object.
|
|
Note that BITS objects are encoded most significant bit
|
|
first. For example, if bit 2 is set, the value of this
|
|
object is the octet string '20'H."
|
|
::= { docsIfCmtsObjects 6 }
|
|
|
|
docsIfCmtsMacToCmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsMacToCmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table to provide a quick access index into the
|
|
docsIfCmtsCmStatusTable. There is exactly one row in this
|
|
table for each row in the docsIfCmtsCmStatusTable. In
|
|
general, the management station SHOULD use this table only
|
|
to get a pointer into the docsIfCmtsCmStatusTable (which
|
|
corresponds to the CM's RF interface MAC address) and
|
|
SHOULD not iterate (e.g., GetNext through) this table."
|
|
::= { docsIfCmtsObjects 7 }
|
|
|
|
docsIfCmtsMacToCmEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsMacToCmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the docsIfCmtsMacToCmTable.
|
|
An entry in this table exists for each cable modem
|
|
that is connected to the CMTS implementing this table."
|
|
INDEX { docsIfCmtsCmMac }
|
|
::= {docsIfCmtsMacToCmTable 1 }
|
|
|
|
DocsIfCmtsMacToCmEntry ::= SEQUENCE {
|
|
|
|
docsIfCmtsCmMac MacAddress,
|
|
docsIfCmtsCmPtr Integer32
|
|
}
|
|
|
|
docsIfCmtsCmMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RF side MAC address for the referenced CM (e.g., the
|
|
interface on the CM that has docsCableMacLayer(127) as
|
|
its ifType)."
|
|
::= { docsIfCmtsMacToCmEntry 1 }
|
|
|
|
docsIfCmtsCmPtr OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An row index into docsIfCmtsCmStatusTable. When queried
|
|
with the correct instance value (e.g., a CM's MAC address),
|
|
returns the index in docsIfCmtsCmStatusTable that
|
|
represents that CM."
|
|
::= { docsIfCmtsMacToCmEntry 2 }
|
|
|
|
-- The following independent object and associated table provide
|
|
-- operators with a mechanism to evaluate the load/utilization of
|
|
-- both upstream and downstream physical channels. This information
|
|
-- may be used for capacity planning and incident analysis and may
|
|
-- be particularly helpful in provisioning of high value QOS.
|
|
--
|
|
-- Utilization is expressed as an index representing the calculated
|
|
-- percentage utilization of the upstream or downstream channel in
|
|
-- the most recent sampling interval (i.e., utilization interval).
|
|
-- Refer to the DESCRIPTION field of the
|
|
-- docsIfCmtsChannelUtUtilization object for definitions and
|
|
-- calculation details.
|
|
|
|
docsIfCmtsChannelUtilizationInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval in seconds over which the channel
|
|
utilization index is calculated. All upstream/downstream
|
|
channels use the same
|
|
docsIfCmtsChannelUtilizationInterval.
|
|
|
|
Setting a value of zero disables utilization reporting.
|
|
A channel utilization index is calculated over a fixed
|
|
window applying to the most recent
|
|
docsIfCmtsChannelUtilizationInterval. It would therefore
|
|
be prudent to use a relatively short
|
|
docsIfCmtsChannelUtilizationInterval.
|
|
It is a vendor decision whether to reset the timer when
|
|
docsIfCmtsChannelUtilizationInterval is changed during a
|
|
utilization sampling period."
|
|
::= { docsIfCmtsObjects 8 }
|
|
|
|
docsIfCmtsChannelUtilizationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsChannelUtilizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reports utilization statistics for attached upstream and
|
|
downstream physical channels."
|
|
::= { docsIfCmtsObjects 9 }
|
|
|
|
docsIfCmtsChannelUtilizationEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsChannelUtilizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Utilization statistics for a single upstream or downstream
|
|
physical channel. An entry exists in this table for each
|
|
ifEntry with an ifType equal to
|
|
docsCableDownstream (128)
|
|
or docsCableUpstream (129)."
|
|
INDEX { ifIndex, docsIfCmtsChannelUtIfType,
|
|
docsIfCmtsChannelUtId }
|
|
::= { docsIfCmtsChannelUtilizationTable 1 }
|
|
|
|
DocsIfCmtsChannelUtilizationEntry ::= SEQUENCE {
|
|
docsIfCmtsChannelUtIfType IANAifType,
|
|
docsIfCmtsChannelUtId Integer32,
|
|
docsIfCmtsChannelUtUtilization Integer32
|
|
}
|
|
|
|
docsIfCmtsChannelUtIfType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary index into this table. Indicates the IANA
|
|
interface type associated with this physical channel.
|
|
Only docsCableDownstream (128) and
|
|
|
|
docsCableUpstream (129) are valid."
|
|
::= { docsIfCmtsChannelUtilizationEntry 1 }
|
|
|
|
docsIfCmtsChannelUtId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tertiary index into this table. Indicates the CMTS
|
|
identifier for this physical channel."
|
|
::= { docsIfCmtsChannelUtilizationEntry 2 }
|
|
|
|
docsIfCmtsChannelUtUtilization OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The calculated and truncated utilization index for this
|
|
physical upstream or downstream channel, accurate as of
|
|
the most recent docsIfCmtsChannelUtilizationInterval.
|
|
|
|
Upstream Channel Utilization Index:
|
|
|
|
The upstream channel utilization index is expressed as a
|
|
percentage of mini-slots utilized on the physical channel,
|
|
regardless of burst type. For an Initial Maintenance
|
|
region, the mini-slots for the complete region are
|
|
considered utilized if the CMTS received an upstream
|
|
burst within the region from any CM on the physical
|
|
channel. For contention REQ and REQ/DATA regions, the
|
|
mini-slots for a transmission opportunity within the
|
|
region are considered utilized if the CMTS received an
|
|
upstream burst within the opportunity from any CM on the
|
|
physical channel. For all other regions, utilized
|
|
mini-slots are those in which the CMTS granted
|
|
bandwidth to any unicast SID on the physical channel.
|
|
|
|
For an upstream interface that has multiple logical
|
|
upstream channels enabled, the utilization index is a
|
|
weighted sum of utilization indices for the logical
|
|
channels. The weight for each utilization index is the
|
|
percentage of upstream mini-slots allocated for the
|
|
corresponding logical channel.
|
|
Example:
|
|
If 75% of bandwidth is allocated to the first logical
|
|
channel and 25% to the second, and the utilization
|
|
indices for each are 60 and 40, respectively, the
|
|
|
|
utilization index for the upstream physical channel is
|
|
(60 * 0.75) + (40 * 0.25) = 55. This figure
|
|
applies to the most recent utilization interval.
|
|
|
|
Downstream Channel Utilization Index:
|
|
|
|
The downstream channel utilization index is a percentage
|
|
expressing the ratio between bytes used to transmit data
|
|
versus the total number of bytes transmitted in the raw
|
|
bandwidth of the MPEG channel. As with the upstream
|
|
utilization index, the calculated value represents
|
|
the most recent utilization interval.
|
|
Formula:
|
|
Downstream utilization index =
|
|
(100 * (data bytes / raw bytes))
|
|
|
|
Definitions:
|
|
Data bytes: Number of bytes transmitted as data in the
|
|
docsIfCmtsChannelUtilizationInterval.
|
|
Identical to docsIfCmtsDownChannelCtrUsed
|
|
Bytes measured over the utilization
|
|
interval.
|
|
Raw bandwidth: Total number of bytes available for
|
|
transmitting data, not including bytes
|
|
used for headers and other overhead.
|
|
Raw bytes: (raw bandwidth *
|
|
docsIfCmtsChannelUtilizationInterval).
|
|
Identical to docsIfCmtsDownChannelCtrTotal
|
|
Bytes measured over the utilization
|
|
interval."
|
|
::= { docsIfCmtsChannelUtilizationEntry 3 }
|
|
|
|
-- The following table provides operators with input data
|
|
-- appropriate for calculating downstream channel utilization.
|
|
-- Operators may use the docsIfCmtsChannelUtilizationTable or
|
|
-- perform their own polling of the
|
|
-- docsIfCmtsDownChannelCounterTable objects to characterize
|
|
-- their downstream channel usage. The 32-bit counter objects are
|
|
-- included to provide backward compatibility with SNMPv1 managers,
|
|
-- which cannot access 64-bit counter objects.
|
|
|
|
docsIfCmtsDownChannelCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsDownChannelCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is implemented at the CMTS to collect
|
|
downstream channel statistics for utilization
|
|
|
|
calculations."
|
|
::= { docsIfCmtsObjects 10 }
|
|
|
|
docsIfCmtsDownChannelCounterEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsDownChannelCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry provides a list of traffic counters for a single
|
|
downstream channel.
|
|
An entry in this table exists for each ifEntry with an
|
|
ifType of docsCableDownstream(128)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfCmtsDownChannelCounterTable 1 }
|
|
|
|
DocsIfCmtsDownChannelCounterEntry ::= SEQUENCE {
|
|
docsIfCmtsDownChnlCtrId Integer32,
|
|
docsIfCmtsDownChnlCtrTotalBytes Counter32,
|
|
docsIfCmtsDownChnlCtrUsedBytes Counter32,
|
|
docsIfCmtsDownChnlCtrExtTotalBytes Counter64,
|
|
docsIfCmtsDownChnlCtrExtUsedBytes Counter64
|
|
}
|
|
|
|
docsIfCmtsDownChnlCtrId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Cable Modem Termination System identification
|
|
of the downstream channel within this particular MAC
|
|
interface. If the interface is down, the object returns
|
|
the most current value. If the downstream channel ID is
|
|
unknown, this object returns a value of 0."
|
|
::= { docsIfCmtsDownChannelCounterEntry 1 }
|
|
|
|
docsIfCmtsDownChnlCtrTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CMTS, the total number of bytes in the Payload
|
|
portion of MPEG Packets (i.e., not including MPEG header
|
|
or pointer_field) transported by this downstream channel.
|
|
This is the 32-bit version of
|
|
docsIfCmtsDownChnlCtrExtTotalBytes, included to provide
|
|
back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsDownChannelCounterEntry 2 }
|
|
|
|
docsIfCmtsDownChnlCtrUsedBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CMTS, the total number of DOCSIS data bytes
|
|
transported by this downstream channel.
|
|
The number of data bytes is defined as the total number
|
|
of bytes transported in DOCSIS payloads minus the number
|
|
of stuff bytes transported in DOCSIS payloads.
|
|
This is the 32-bit version of
|
|
docsIfCmtsDownChnlCtrExtUsedBytes, included to provide
|
|
back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsDownChannelCounterEntry 3 }
|
|
|
|
docsIfCmtsDownChnlCtrExtTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CMTS, the total number of bytes in the Payload
|
|
portion of MPEG Packets (i.e., not including MPEG header
|
|
or pointer_field) transported by this downstream
|
|
channel.
|
|
This is the 64-bit version of
|
|
docsIfCmtsDownChnlCtrTotalBytes and will not be
|
|
accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsDownChannelCounterEntry 4 }
|
|
|
|
docsIfCmtsDownChnlCtrExtUsedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At the CMTS, the total number of DOCSIS data bytes
|
|
transported by this downstream channel. The number
|
|
of data bytes is defined as the total number of bytes
|
|
transported in DOCSIS payloads minus the number of
|
|
stuff bytes transported in DOCSIS payloads.
|
|
This is the 64-bit version of
|
|
docsIfCmtsDownChnlCtrUsedBytes and will not be accessible
|
|
to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsDownChannelCounterEntry 5 }
|
|
|
|
-- The following table provides operators with input data appropriate
|
|
-- for calculating upstream channel utilization, and for determining
|
|
-- the traffic characteristics of upstream channels. Operators may
|
|
-- use the docsIfCmtsChannelUtilizationTable or perform their own
|
|
-- polling of the docsIfCmtsUpChannelCounterTable objects for
|
|
-- utilization determination.
|
|
-- The first four 32 and 64 objects in this table are mandatory.
|
|
-- Vendors may choose to implement the remaining optional objects to
|
|
-- provide operators with finer characterization of upstream channel
|
|
-- traffic patterns. The 32-bit counter objects are included to
|
|
-- provide backward compatibility with SNMPv1 managers, which cannot
|
|
-- access 64-bit counter objects.
|
|
|
|
docsIfCmtsUpChannelCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DocsIfCmtsUpChannelCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is implemented at the CMTS to provide upstream
|
|
channel statistics appropriate for channel utilization
|
|
calculations."
|
|
::= { docsIfCmtsObjects 11 }
|
|
|
|
docsIfCmtsUpChannelCounterEntry OBJECT-TYPE
|
|
SYNTAX DocsIfCmtsUpChannelCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of traffic statistics for a single upstream channel.
|
|
For DOCSIS 2.0 CMTSs, an entry in this table
|
|
exists for each ifEntry with an ifType of
|
|
docsCableUpstreamChannel (205).
|
|
|
|
For DOCSIS 1.x CMTSs, an entry in this table
|
|
exists for each ifEntry with an ifType of
|
|
docsCableUpstream (129)."
|
|
INDEX { ifIndex }
|
|
::= { docsIfCmtsUpChannelCounterTable 1 }
|
|
|
|
DocsIfCmtsUpChannelCounterEntry ::= SEQUENCE {
|
|
docsIfCmtsUpChnlCtrId Integer32,
|
|
docsIfCmtsUpChnlCtrTotalMslots Counter32,
|
|
docsIfCmtsUpChnlCtrUcastGrantedMslots Counter32,
|
|
docsIfCmtsUpChnlCtrTotalCntnMslots Counter32,
|
|
docsIfCmtsUpChnlCtrUsedCntnMslots Counter32,
|
|
docsIfCmtsUpChnlCtrExtTotalMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtUcastGrantedMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnMslots Counter64,
|
|
docsIfCmtsUpChnlCtrCollCntnMslots Counter32,
|
|
docsIfCmtsUpChnlCtrTotalCntnReqMslots Counter32,
|
|
docsIfCmtsUpChnlCtrUsedCntnReqMslots Counter32,
|
|
docsIfCmtsUpChnlCtrCollCntnReqMslots Counter32,
|
|
docsIfCmtsUpChnlCtrTotalCntnReqDataMslots Counter32,
|
|
docsIfCmtsUpChnlCtrUsedCntnReqDataMslots Counter32,
|
|
docsIfCmtsUpChnlCtrCollCntnReqDataMslots Counter32,
|
|
docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots Counter32,
|
|
docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots Counter32,
|
|
docsIfCmtsUpChnlCtrCollCntnInitMaintMslots Counter32,
|
|
docsIfCmtsUpChnlCtrExtCollCntnMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots Counter64,
|
|
docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots Counter64
|
|
}
|
|
|
|
docsIfCmtsUpChnlCtrId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CMTS identification of the upstream channel."
|
|
::= { docsIfCmtsUpChannelCounterEntry 1 }
|
|
|
|
docsIfCmtsUpChnlCtrTotalMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of all mini-slots
|
|
defined for this upstream logical channel. This count
|
|
includes all IUCs and SIDs, even those allocated to the
|
|
NULL SID for a 2.0 logical channel that is inactive. This
|
|
is the 32-bit version of docsIfCmtsUpChnlCtrExtTotalMslots
|
|
and is included for back compatibility with SNMPv1
|
|
managers. Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 2 }
|
|
|
|
docsIfCmtsUpChnlCtrUcastGrantedMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of unicast
|
|
granted mini-slots on the upstream logical channel,
|
|
regardless of burst type. Unicast granted mini-slots are
|
|
those in which the CMTS assigned bandwidth to any unicast
|
|
SID on the logical channel. However, this object does not
|
|
include minis-lots for reserved IUCs, or grants to SIDs
|
|
designated as meaning 'no CM'. This is the 32-bit version
|
|
of docsIfCmtsUpChnlCtrExtUcastGrantedMslots, and is
|
|
included for back compatibility with SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 3 }
|
|
|
|
docsIfCmtsUpChnlCtrTotalCntnMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
mini-slots defined for this upstream logical channel. This
|
|
count includes all mini-slots assigned to a broadcast or
|
|
|
|
multicast SID on the logical channel. This is the 32-bit
|
|
version of docsIfCmtsUpChnlCtrExtTotalCntnMslots, and is
|
|
included for back compatibility with SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 4 }
|
|
|
|
docsIfCmtsUpChnlCtrUsedCntnMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
mini-slots utilized on the upstream logical channel. For
|
|
contention regions, utilized mini-slots are those in which
|
|
the CMTS correctly received an upstream burst from any CM
|
|
on the upstream logical channel. This is the 32-bit
|
|
version of docsIfCmtsUpChnlCtrExtUsedCntnMslots and is
|
|
included for back compatibility with SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 5 }
|
|
|
|
docsIfCmtsUpChnlCtrExtTotalMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of all mini-slots
|
|
defined for this upstream logical channel. This count
|
|
includes all IUCs and SIDs, even those allocated to the
|
|
NULL SID for a 2.0 logical channel that is inactive. This
|
|
is the 64-bit version of docsIfCmtsUpChnlCtrTotalMslots
|
|
and will not be accessible to SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 6 }
|
|
|
|
docsIfCmtsUpChnlCtrExtUcastGrantedMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of unicast
|
|
granted mini-slots on the upstream logical channel,
|
|
regardless of burst type. Unicast granted mini-slots are
|
|
those in which the CMTS assigned bandwidth to any unicast
|
|
SID on the logical channel. However, this object does not
|
|
include mini-slots for reserved IUCs, or grants to SIDs
|
|
designated as meaning 'no CM'. This is the 64-bit version
|
|
of docsIfCmtsUpChnlCtrUcastGrantedMslots and will not be
|
|
accessible to SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 7 }
|
|
|
|
docsIfCmtsUpChnlCtrExtTotalCntnMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
mini-slots defined for this upstream logical channel. This
|
|
count includes all mini-slots assigned to a broadcast or
|
|
multicast SID on the logical channel. This is the 64-bit
|
|
version of docsIfCmtsUpChnlCtrTotalCntnMslots and will
|
|
not be accessible to SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 8 }
|
|
|
|
docsIfCmtsUpChnlCtrExtUsedCntnMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
|
|
mini-slots utilized on the upstream logical channel. For
|
|
contention regions, utilized mini-slots are those in which
|
|
the CMTS correctly received an upstream burst from any CM
|
|
on the upstream logical channel. This is the 64-bit
|
|
version of docsIfCmtsUpChnlCtrUsedCntnMslots and will not
|
|
be accessible to SNMPv1 managers.
|
|
Support for this object is mandatory.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 9 }
|
|
|
|
docsIfCmtsUpChnlCtrCollCntnMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
mini-slots subjected to collisions on the upstream logical
|
|
channel. For contention regions, these are the mini-slots
|
|
applicable to bursts that the CMTS detected but could not
|
|
correctly receive. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtCollCntnMslots and is included for
|
|
back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 10 }
|
|
|
|
docsIfCmtsUpChnlCtrTotalCntnReqMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request mini-slots defined for this upstream logical
|
|
channel. This count includes all mini-slots for IUC1
|
|
assigned to a broadcast or multicast SID on the logical
|
|
channel. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqMslots and is included
|
|
for back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 11 }
|
|
|
|
docsIfCmtsUpChnlCtrUsedCntnReqMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request mini-slots utilized on this upstream logical
|
|
channel. This count includes all contention mini-slots for
|
|
IUC1 applicable to bursts that the CMTS correctly
|
|
received. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqMslots and is included
|
|
for back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 12 }
|
|
|
|
docsIfCmtsUpChnlCtrCollCntnReqMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request mini-slots subjected to collisions on this upstream
|
|
logical channel. This includes all contention mini-slots
|
|
for IUC1 applicable to bursts that the CMTS detected but
|
|
could not correctly receive. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqMslots and is included
|
|
for back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 13 }
|
|
|
|
docsIfCmtsUpChnlCtrTotalCntnReqDataMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
|
|
request data mini-slots defined for this upstream logical
|
|
channel. This count includes all mini-slots for IUC2
|
|
assigned to a broadcast or multicast SID on the logical
|
|
channel. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots and is
|
|
included for back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 14 }
|
|
|
|
docsIfCmtsUpChnlCtrUsedCntnReqDataMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request data mini-slots utilized on this upstream logical
|
|
channel. This includes all contention mini-slots for IUC2
|
|
applicable to bursts that the CMTS correctly received.
|
|
This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots and is
|
|
included for back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 15 }
|
|
|
|
docsIfCmtsUpChnlCtrCollCntnReqDataMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request data mini-slots subjected to collisions on this
|
|
upstream logical channel. This includes all contention
|
|
mini-slots for IUC2 applicable to bursts that the CMTS
|
|
detected, but could not correctly receive. This is the
|
|
32-bit version of
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots and is
|
|
included for back compatibility with SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 16 }
|
|
|
|
docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
initial maintenance mini-slots defined for this upstream
|
|
logical channel. This includes all mini-slots for IUC3
|
|
assigned to a broadcast or multicast SID on the logical
|
|
channel. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots
|
|
and is included for back compatibility with SNMPv1
|
|
managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 17 }
|
|
|
|
docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
initial maintenance mini-slots utilized on this upstream
|
|
logical channel. This includes all contention mini-slots
|
|
for IUC3 applicable to bursts that the CMTS correctly
|
|
received. This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots
|
|
and is included for back compatibility with SNMPv1
|
|
managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 18 }
|
|
|
|
docsIfCmtsUpChnlCtrCollCntnInitMaintMslots OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
initial maintenance mini-slots subjected to collisions on
|
|
this upstream logical channel. This includes all
|
|
contention mini-slots for IUC3 applicable to bursts that
|
|
the CMTS detected, but could not correctly receive.
|
|
This is the 32-bit version of
|
|
docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots
|
|
and is included for back compatibility with SNMPv1
|
|
managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 19 }
|
|
|
|
docsIfCmtsUpChnlCtrExtCollCntnMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of collision
|
|
contention mini-slots on the upstream logical channel.
|
|
For contention regions, these are the mini-slots applicable
|
|
to bursts that the CMTS detected, but could not correctly
|
|
receive. This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrCollCntnMslots and will not be
|
|
accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 20 }
|
|
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request mini-slots defined for this upstream logical
|
|
channel. This count includes all mini-slots for IUC1
|
|
assigned to a broadcast or multicast SID on the logical
|
|
channel. This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrTotalCntnReqMslots and will not be
|
|
accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 21 }
|
|
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request mini-slots utilized on this upstream logical
|
|
channel. This count includes all contention mini-slots for
|
|
IUC1 applicable to bursts that the CMTS correctly
|
|
received. This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrUsedCntnReqMslots and will not be
|
|
accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 22 }
|
|
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request mini-slots subjected to collisions on this upstream
|
|
logical channel. This includes all contention mini-slots
|
|
for IUC1 applicable to bursts that the CMTS detected,
|
|
but could not correctly receive. This is the 64-bit
|
|
version of docsIfCmtsUpChnlCtrCollCntnReqMslots and will
|
|
not be accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 23 }
|
|
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request data mini-slots defined for this upstream logical
|
|
channel. This count includes all mini-slots for IUC2
|
|
assigned to a broadcast or multicast SID on the logical
|
|
channel. This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrTotalCntnReqDataMslots and will not be
|
|
accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 24 }
|
|
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request data mini-slots utilized on this upstream logical
|
|
channel. This includes all contention mini-slots for IUC2
|
|
applicable to bursts that the CMTS correctly received.
|
|
This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrUsedCntnReqDataMslots and will not be
|
|
accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 25 }
|
|
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
request data mini-slots subjected to collisions on this
|
|
upstream logical channel. This includes all contention
|
|
mini-slots for IUC2 applicable to bursts that the CMTS
|
|
detected, but could not correctly receive. This is the
|
|
64-bit version of
|
|
docsIfCmtsUpChnlCtrCollCntnReqDataMslots
|
|
and will not be accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 26 }
|
|
|
|
docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of initial
|
|
maintenance mini-slots defined for this upstream logical
|
|
channel. This count includes all mini-slots for IUC3
|
|
assigned to a broadcast or multicast SID on the logical
|
|
channel. This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots
|
|
and will not be accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 27 }
|
|
|
|
docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of initial
|
|
maintenance mini-slots utilized on this upstream logical
|
|
channel. This includes all contention mini-slots for IUC3
|
|
applicable to bursts that the CMTS correctly received.
|
|
This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots
|
|
and will not be accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 28 }
|
|
|
|
docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "mini-slots"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current count, from CMTS initialization, of contention
|
|
initial maintenance mini-slots subjected to collisions on
|
|
this upstream logical channel. This includes all
|
|
contention mini-slots for IUC3 applicable to bursts that
|
|
the CMTS detected, but could not correctly receive.
|
|
This is the 64-bit version of
|
|
docsIfCmtsUpChnlCtrCollCntnInitMaintMslots and will not
|
|
be accessible to SNMPv1 managers.
|
|
Discontinuities in the value of this counter can occur
|
|
at reinitialization of the managed system, and at other
|
|
times as indicated by the value of
|
|
ifCounterDiscontinuityTime for the associated ifIndex."
|
|
::= { docsIfCmtsUpChannelCounterEntry 29 }
|
|
|
|
--
|
|
-- notification group is for future extension.
|
|
--
|
|
|
|
docsIfNotification OBJECT IDENTIFIER ::= { docsIfMib 2 }
|
|
|
|
--
|
|
-- MIB Compliance statements.
|
|
--
|
|
|
|
--
|
|
-- Conformance definitions
|
|
--
|
|
|
|
docsIfConformance OBJECT IDENTIFIER ::= { docsIfMib 3 }
|
|
docsIfCompliances OBJECT IDENTIFIER ::= { docsIfConformance 1 }
|
|
docsIfGroups OBJECT IDENTIFIER ::= { docsIfConformance 2 }
|
|
|
|
docsIfBasicCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for devices that implement
|
|
DOCSIS 1.x compliant Radio Frequency Interfaces."
|
|
|
|
MODULE -- docsIfMib
|
|
|
|
-- unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
docsIfBasicGroup
|
|
}
|
|
|
|
-- conditionally mandatory group
|
|
GROUP docsIfCmGroup
|
|
DESCRIPTION
|
|
"This group is implemented only in cable modems, not in
|
|
cable modem termination systems."
|
|
|
|
-- conditionally mandatory group
|
|
GROUP docsIfCmtsGroup
|
|
DESCRIPTION
|
|
"This group is implemented only in cable modem termination
|
|
systems, not in cable modems."
|
|
|
|
OBJECT docsIfDownChannelFrequency
|
|
WRITE-SYNTAX Integer32 (54000000..860000000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems. The values above are
|
|
appropriate for a cable plant using a Sub-Split channel
|
|
plan. If DOCSIS is extended to cover other types of
|
|
channel plans (and frequency allocations), this object
|
|
will be modified accordingly."
|
|
|
|
OBJECT docsIfDownChannelWidth
|
|
WRITE-SYNTAX Integer32 (6000000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is important to implement this object as read-only.
|
|
In cable modems, this object is always implemented as
|
|
read-only. The above value is appropriate for cable
|
|
plants running under NTSC (National Television
|
|
Standards Committee) standards. If DOCSIS is extended to
|
|
work with other standards (e.g., European standards), this
|
|
object will be modified accordingly."
|
|
|
|
OBJECT docsIfDownChannelModulation
|
|
WRITE-SYNTAX INTEGER {
|
|
qam64 (3),
|
|
qam256 (4)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfDownChannelInterleave
|
|
WRITE-SYNTAX INTEGER {
|
|
taps8Increment16(3),
|
|
taps16Increment8(4),
|
|
taps32Increment4(5),
|
|
taps64Increment2(6),
|
|
taps128Increment1(7)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfDownChannelPower
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelFrequency
|
|
WRITE-SYNTAX Integer32 (5000000..42000000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems. The values above are
|
|
appropriate for a cable plant using a Sub-Split channel
|
|
plan. If DOCSIS is extended to cover other types of
|
|
channel plans (and frequency allocations), this object
|
|
will be modified accordingly."
|
|
|
|
OBJECT docsIfUpChannelWidth
|
|
WRITE-SYNTAX Integer32 (200000..3200000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems. The above value is appropriate
|
|
for cable plants running under NTSC (National Television
|
|
Standards Committee) standards. If DOCSIS is extended to
|
|
work with other standards (e.g., European standards), this
|
|
object will be modified accordingly."
|
|
|
|
OBJECT docsIfUpChannelModulationProfile
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelSlotSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfUpChannelRangingBackoffStart
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelRangingBackoffEnd
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelTxBackoffStart
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelTxBackoffEnd
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfQosProfPriority
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfMaxUpBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfGuarUpBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfMaxDownBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfMaxTxBurst
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfBaselinePrivacy
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfCmtsServiceAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsSyncInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsUcdInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsInsertInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsInvitedRangingAttempts
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsQosProfilePermissions
|
|
WRITE-SYNTAX BITS {
|
|
createByManagement(0),
|
|
updateByManagement(1)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsModType
|
|
WRITE-SYNTAX INTEGER {
|
|
qpsk (2),
|
|
qam16 (3)
|
|
}
|
|
DESCRIPTION
|
|
"A management station MAY only set 16QAM or QPSK modulation,
|
|
but others might be possible, based on device
|
|
configuration."
|
|
|
|
OBJECT docsIfCmtsModPreambleLen
|
|
SYNTAX Integer32 (0..1024)
|
|
DESCRIPTION
|
|
"The range of the values for this MODULE-COMPLIANCE
|
|
is 0..1024."
|
|
|
|
OBJECT docsIfCmtsModFECErrorCorrection
|
|
SYNTAX Integer32 (0..10)
|
|
DESCRIPTION
|
|
"The range of the values for this MODULE-COMPLIANCE
|
|
is 0..10."
|
|
::= { docsIfCompliances 1 }
|
|
|
|
docsIfBasicComplianceV2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that implement
|
|
DOCSIS 2.0 Radio Frequency Interfaces."
|
|
|
|
MODULE -- docsIfMib
|
|
|
|
-- unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
docsIfBasicGroupV2
|
|
}
|
|
|
|
-- conditionally mandatory group
|
|
GROUP docsIfCmGroupV2
|
|
DESCRIPTION
|
|
"This group is implemented only in cable modems, not in
|
|
cable modem termination systems."
|
|
|
|
-- conditionally mandatory group
|
|
GROUP docsIfCmtsGroupV2
|
|
DESCRIPTION
|
|
"This group is implemented only in cable modem termination
|
|
systems, not in cable modems."
|
|
|
|
OBJECT docsIfDownChannelFrequency
|
|
WRITE-SYNTAX Integer32 (47000000..862000000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems.
|
|
A range of 54MHz to 860MHz is appropriate for a cable
|
|
plant using a North American Sub-Split channel plan.
|
|
The spectrum range has been expanded to accommodate
|
|
a lower edge of 47MHz and an upper edge of 862MHz
|
|
for some European channel plans.
|
|
If DOCSIS is extended to cover other types of channel
|
|
plans (and frequency allocations), this object will be
|
|
modified accordingly."
|
|
|
|
OBJECT docsIfDownChannelWidth
|
|
WRITE-SYNTAX Integer32 (6000000 | 8000000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is important to implement this object as read-only.
|
|
In cable modems, this object is always implemented as
|
|
read-only. The value of 6 MHz is appropriate for cable
|
|
plants running under NTSC (National Television
|
|
Standards Committee) standards. The value of 8 MHz is
|
|
appropriate for cable plants running under ETSI
|
|
standards. For other regional standards, this
|
|
object will be modified accordingly."
|
|
|
|
OBJECT docsIfDownChannelModulation
|
|
WRITE-SYNTAX INTEGER {
|
|
qam64 (3),
|
|
qam256 (4)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfDownChannelInterleave
|
|
WRITE-SYNTAX INTEGER {
|
|
taps8Increment16(3),
|
|
taps16Increment8(4),
|
|
taps32Increment4(5),
|
|
taps64Increment2(6),
|
|
taps128Increment1(7),
|
|
taps12increment17(8)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfDownChannelPower
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-write in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelFrequency
|
|
WRITE-SYNTAX Integer32 (5000000..65000000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems.
|
|
A range of 5MHz to 42MHz is appropriate for a cable
|
|
plant using a North American Sub-Split channel plan.
|
|
The spectrum range has been expanded to accommodate
|
|
an upper edge of 65MHz for some European channel plans.
|
|
If DOCSIS is extended to cover other types of channel
|
|
plans (and frequency allocations), this object will
|
|
be modified accordingly."
|
|
|
|
OBJECT docsIfUpChannelWidth
|
|
WRITE-SYNTAX Integer32 (200000..6400000)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems,
|
|
read-only in cable modems. The above value is appropriate
|
|
for cable plants running under NTSC (National Television
|
|
Standards Committee) standards. If DOCSIS is extended to
|
|
work with other standards (e.g., European standards), this
|
|
object will be modified accordingly."
|
|
|
|
OBJECT docsIfUpChannelModulationProfile
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelSlotSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfUpChannelRangingBackoffStart
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelRangingBackoffEnd
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelTxBackoffStart
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelTxBackoffEnd
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelScdmaActiveCodes
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems.
|
|
The number of active codes when SCDMA is in use MUST range
|
|
from 64 to 128 and MUST be a non-Prime value.
|
|
Providing this range allows for the following features
|
|
and capabilities:
|
|
1) Power management in S-CDMA spreader-on frames
|
|
(with a 3 dB spread).
|
|
|
|
2) Avoidance of code 0.
|
|
3) Flexible mini-slot sizes with and without the use of
|
|
code 0."
|
|
|
|
OBJECT docsIfUpChannelScdmaCodesPerSlot
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelScdmaFrameSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelScdmaHoppingSeed
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelCloneFrom
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelUpdate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfUpChannelStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in Cable Modem Termination Systems;
|
|
read-only in Cable Modems.
|
|
Entries associated to physical interfaces only support
|
|
the read-only value 'active'."
|
|
|
|
OBJECT docsIfUpChannelPreEqEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-create in cable modem termination systems;
|
|
read-only in cable modems."
|
|
|
|
OBJECT docsIfQosProfPriority
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfMaxUpBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfGuarUpBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfMaxDownBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfBaselinePrivacy
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfQosProfMaxTransmitBurst
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is always read-only in cable modems.
|
|
It is compliant to implement this object as read-only
|
|
in cable modem termination systems."
|
|
|
|
OBJECT docsIfCmRangingTimeout
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmStatusModulationType
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
tdma(1),
|
|
atdma(2),
|
|
scdma(3)
|
|
}
|
|
DESCRIPTION
|
|
"CM does not use both modulation burst profiles of a
|
|
'tdmAndAtdma' ChannelType; therefore, 'tdmAndAtdma'is
|
|
not supported."
|
|
|
|
OBJECT docsIfCmtsServiceAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsSyncInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsUcdInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsInsertInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsInvitedRangingAttempts
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsQosProfilePermissions
|
|
WRITE-SYNTAX BITS {
|
|
createByManagement(0),
|
|
updateByManagement(1)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is compliant to implement this object as read-only."
|
|
|
|
OBJECT docsIfCmtsModType
|
|
WRITE-SYNTAX INTEGER {
|
|
qpsk(2),
|
|
qam16(3),
|
|
qam64(6)
|
|
}
|
|
DESCRIPTION
|
|
"A management station MAY only set 64QAM, 16QAM, or QPSK
|
|
modulation for Time or Code division Multiple Access,
|
|
but others might be possible based on device
|
|
configuration."
|
|
|
|
OBJECT docsIfCmtsCmStatusModulationType
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
tdma(1),
|
|
atdma(2),
|
|
scdma(3)
|
|
}
|
|
DESCRIPTION
|
|
"CM does not use both modulation burst profiles of a
|
|
'tdmAndAtdma' ChannelType; therefore, 'tdmAndAtdma'is
|
|
not supported."
|
|
::= { docsIfCompliances 2 }
|
|
|
|
docsIfBasicGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfDownChannelId,
|
|
docsIfDownChannelFrequency,
|
|
docsIfDownChannelWidth,
|
|
docsIfDownChannelModulation,
|
|
docsIfDownChannelInterleave,
|
|
docsIfDownChannelPower,
|
|
docsIfUpChannelId,
|
|
docsIfUpChannelFrequency,
|
|
docsIfUpChannelWidth,
|
|
docsIfUpChannelModulationProfile,
|
|
docsIfUpChannelSlotSize,
|
|
docsIfUpChannelTxTimingOffset,
|
|
docsIfUpChannelRangingBackoffStart,
|
|
docsIfUpChannelRangingBackoffEnd,
|
|
docsIfUpChannelTxBackoffStart,
|
|
docsIfUpChannelTxBackoffEnd,
|
|
docsIfQosProfPriority,
|
|
docsIfQosProfMaxUpBandwidth,
|
|
docsIfQosProfGuarUpBandwidth,
|
|
docsIfQosProfMaxDownBandwidth,
|
|
docsIfQosProfMaxTxBurst,
|
|
docsIfQosProfBaselinePrivacy,
|
|
docsIfQosProfStatus,
|
|
docsIfSigQIncludesContention,
|
|
docsIfSigQUnerroreds,
|
|
docsIfSigQCorrecteds,
|
|
docsIfSigQUncorrectables,
|
|
docsIfSigQSignalNoise,
|
|
docsIfSigQMicroreflections,
|
|
docsIfSigQEqualizationData
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Group of objects implemented in both cable modems and
|
|
cable modem termination systems."
|
|
::= { docsIfGroups 1 }
|
|
|
|
docsIfCmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfCmCmtsAddress,
|
|
docsIfCmCapabilities,
|
|
docsIfCmRangingTimeout,
|
|
docsIfCmStatusValue,
|
|
docsIfCmStatusCode,
|
|
docsIfCmStatusTxPower,
|
|
docsIfCmStatusResets,
|
|
docsIfCmStatusLostSyncs,
|
|
docsIfCmStatusInvalidMaps,
|
|
docsIfCmStatusInvalidUcds,
|
|
docsIfCmStatusInvalidRangingResponses,
|
|
docsIfCmStatusInvalidRegistrationResponses,
|
|
docsIfCmStatusT1Timeouts,
|
|
docsIfCmStatusT2Timeouts,
|
|
docsIfCmStatusT3Timeouts,
|
|
docsIfCmStatusT4Timeouts,
|
|
docsIfCmStatusRangingAborteds,
|
|
docsIfCmServiceQosProfile,
|
|
docsIfCmServiceTxSlotsImmed,
|
|
docsIfCmServiceTxSlotsDed,
|
|
docsIfCmServiceTxRetries,
|
|
docsIfCmServiceTxExceededs,
|
|
docsIfCmServiceRqRetries,
|
|
docsIfCmServiceRqExceededs
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Group of objects implemented in cable modems."
|
|
::= { docsIfGroups 2 }
|
|
|
|
docsIfCmtsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfCmtsCapabilities,
|
|
docsIfCmtsSyncInterval,
|
|
docsIfCmtsUcdInterval,
|
|
docsIfCmtsMaxServiceIds,
|
|
docsIfCmtsInvitedRangingAttempts,
|
|
docsIfCmtsInsertInterval,
|
|
docsIfCmtsStatusInvalidRangeReqs,
|
|
docsIfCmtsStatusRangingAborteds,
|
|
docsIfCmtsStatusInvalidRegReqs,
|
|
docsIfCmtsStatusFailedRegReqs,
|
|
docsIfCmtsStatusInvalidDataReqs,
|
|
docsIfCmtsStatusT5Timeouts,
|
|
docsIfCmtsCmStatusMacAddress,
|
|
docsIfCmtsCmStatusIpAddress,
|
|
docsIfCmtsCmStatusDownChannelIfIndex,
|
|
docsIfCmtsCmStatusUpChannelIfIndex,
|
|
docsIfCmtsCmStatusRxPower,
|
|
docsIfCmtsCmStatusTimingOffset,
|
|
docsIfCmtsCmStatusEqualizationData,
|
|
docsIfCmtsCmStatusValue,
|
|
docsIfCmtsCmStatusUnerroreds,
|
|
docsIfCmtsCmStatusCorrecteds,
|
|
docsIfCmtsCmStatusUncorrectables,
|
|
docsIfCmtsCmStatusSignalNoise,
|
|
docsIfCmtsCmStatusMicroreflections,
|
|
docsIfCmtsServiceCmStatusIndex,
|
|
docsIfCmtsServiceAdminStatus,
|
|
docsIfCmtsServiceQosProfile,
|
|
docsIfCmtsServiceCreateTime,
|
|
docsIfCmtsServiceInOctets,
|
|
docsIfCmtsServiceInPackets,
|
|
docsIfCmtsModType,
|
|
docsIfCmtsModControl,
|
|
docsIfCmtsModPreambleLen,
|
|
docsIfCmtsModDifferentialEncoding,
|
|
docsIfCmtsModFECErrorCorrection,
|
|
docsIfCmtsModFECCodewordLength,
|
|
docsIfCmtsModScramblerSeed,
|
|
docsIfCmtsModMaxBurstSize,
|
|
docsIfCmtsModGuardTimeSize,
|
|
docsIfCmtsModLastCodewordShortened,
|
|
docsIfCmtsModScrambler,
|
|
docsIfCmtsQosProfilePermissions,
|
|
docsIfCmtsCmPtr
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Group of objects implemented in Cable Modem Termination
|
|
Systems."
|
|
::= { docsIfGroups 3 }
|
|
|
|
-- obsolete group
|
|
-- RFC 2670 already had a obsolete group, even though RFC2670
|
|
-- was the first version of this MIB Module.
|
|
|
|
docsIfObsoleteGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfCmRangingRespTimeout,
|
|
docsIfCmtsInsertionInterval
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Group of objects obsoleted."
|
|
::= { docsIfGroups 4 }
|
|
|
|
docsIfBasicGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfDownChannelId,
|
|
docsIfDownChannelFrequency,
|
|
docsIfDownChannelWidth,
|
|
docsIfDownChannelModulation,
|
|
docsIfDownChannelInterleave,
|
|
docsIfDownChannelPower,
|
|
docsIfDownChannelAnnex,
|
|
docsIfUpChannelId,
|
|
docsIfUpChannelFrequency,
|
|
docsIfUpChannelWidth,
|
|
docsIfUpChannelModulationProfile,
|
|
docsIfUpChannelSlotSize,
|
|
docsIfUpChannelTxTimingOffset,
|
|
docsIfUpChannelRangingBackoffStart,
|
|
docsIfUpChannelRangingBackoffEnd,
|
|
docsIfUpChannelTxBackoffStart,
|
|
docsIfUpChannelTxBackoffEnd,
|
|
docsIfUpChannelScdmaActiveCodes,
|
|
docsIfUpChannelScdmaCodesPerSlot,
|
|
docsIfUpChannelScdmaFrameSize,
|
|
docsIfUpChannelScdmaHoppingSeed,
|
|
docsIfUpChannelType,
|
|
docsIfUpChannelCloneFrom,
|
|
docsIfUpChannelUpdate,
|
|
docsIfUpChannelStatus,
|
|
docsIfUpChannelPreEqEnable,
|
|
docsIfQosProfPriority,
|
|
docsIfQosProfMaxUpBandwidth,
|
|
docsIfQosProfGuarUpBandwidth,
|
|
docsIfQosProfMaxDownBandwidth,
|
|
docsIfQosProfBaselinePrivacy,
|
|
docsIfQosProfStatus,
|
|
docsIfQosProfMaxTransmitBurst,
|
|
docsIfSigQIncludesContention,
|
|
docsIfSigQUnerroreds,
|
|
docsIfSigQCorrecteds,
|
|
docsIfSigQUncorrectables,
|
|
docsIfSigQSignalNoise,
|
|
docsIfSigQMicroreflections,
|
|
docsIfSigQExtUnerroreds,
|
|
docsIfSigQExtCorrecteds,
|
|
docsIfSigQExtUncorrectables,
|
|
docsIfDocsisBaseCapability
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects implemented in both cable modems and
|
|
cable modem termination systems."
|
|
::= { docsIfGroups 5 }
|
|
|
|
docsIfCmGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfCmCmtsAddress,
|
|
docsIfCmCapabilities,
|
|
docsIfCmRangingTimeout,
|
|
docsIfCmStatusValue,
|
|
docsIfCmStatusCode,
|
|
docsIfCmStatusTxPower,
|
|
docsIfCmStatusResets,
|
|
docsIfCmStatusLostSyncs,
|
|
docsIfCmStatusInvalidMaps,
|
|
docsIfCmStatusInvalidUcds,
|
|
docsIfCmStatusInvalidRangingResponses,
|
|
docsIfCmStatusInvalidRegistrationResponses,
|
|
docsIfCmStatusT1Timeouts,
|
|
docsIfCmStatusT2Timeouts,
|
|
docsIfCmStatusT3Timeouts,
|
|
docsIfCmStatusT4Timeouts,
|
|
docsIfCmStatusRangingAborteds,
|
|
docsIfCmStatusDocsisOperMode,
|
|
docsIfCmStatusModulationType,
|
|
docsIfCmStatusEqualizationData,
|
|
docsIfCmStatusUCCs,
|
|
docsIfCmStatusUCCFails,
|
|
docsIfCmServiceQosProfile,
|
|
docsIfCmServiceTxSlotsImmed,
|
|
docsIfCmServiceTxSlotsDed,
|
|
docsIfCmServiceTxRetries,
|
|
docsIfCmServiceTxExceededs,
|
|
docsIfCmServiceRqRetries,
|
|
docsIfCmServiceRqExceededs,
|
|
docsIfCmServiceExtTxSlotsImmed,
|
|
docsIfCmServiceExtTxSlotsDed,
|
|
docsIfSigQEqualizationData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects implemented in cable modems."
|
|
::= { docsIfGroups 6 }
|
|
|
|
docsIfCmtsGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
docsIfCmtsCapabilities,
|
|
docsIfCmtsSyncInterval,
|
|
docsIfCmtsUcdInterval,
|
|
docsIfCmtsMaxServiceIds,
|
|
docsIfCmtsInvitedRangingAttempts,
|
|
docsIfCmtsInsertInterval,
|
|
docsIfCmtsMacStorageType,
|
|
docsIfCmtsStatusInvalidRangeReqs,
|
|
docsIfCmtsStatusRangingAborteds,
|
|
docsIfCmtsStatusInvalidRegReqs,
|
|
docsIfCmtsStatusFailedRegReqs,
|
|
docsIfCmtsStatusInvalidDataReqs,
|
|
docsIfCmtsStatusT5Timeouts,
|
|
docsIfCmtsCmStatusMacAddress,
|
|
docsIfCmtsCmStatusDownChannelIfIndex,
|
|
docsIfCmtsCmStatusUpChannelIfIndex,
|
|
docsIfCmtsCmStatusRxPower,
|
|
docsIfCmtsCmStatusTimingOffset,
|
|
docsIfCmtsCmStatusEqualizationData,
|
|
docsIfCmtsCmStatusValue,
|
|
docsIfCmtsCmStatusUnerroreds,
|
|
docsIfCmtsCmStatusCorrecteds,
|
|
docsIfCmtsCmStatusUncorrectables,
|
|
docsIfCmtsCmStatusSignalNoise,
|
|
docsIfCmtsCmStatusMicroreflections,
|
|
docsIfCmtsCmStatusExtUnerroreds,
|
|
docsIfCmtsCmStatusExtCorrecteds,
|
|
docsIfCmtsCmStatusExtUncorrectables,
|
|
docsIfCmtsCmStatusDocsisRegMode,
|
|
docsIfCmtsCmStatusModulationType,
|
|
docsIfCmtsCmStatusInetAddressType,
|
|
docsIfCmtsCmStatusInetAddress,
|
|
docsIfCmtsCmStatusValueLastUpdate,
|
|
docsIfCmtsCmStatusHighResolutionTimingOffset,
|
|
docsIfCmtsServiceAdminStatus,
|
|
docsIfCmtsServiceQosProfile,
|
|
docsIfCmtsServiceCreateTime,
|
|
docsIfCmtsServiceInOctets,
|
|
docsIfCmtsServiceInPackets,
|
|
docsIfCmtsServiceNewCmStatusIndex,
|
|
docsIfCmtsModType,
|
|
docsIfCmtsModControl,
|
|
docsIfCmtsModPreambleLen,
|
|
docsIfCmtsModDifferentialEncoding,
|
|
docsIfCmtsModFECErrorCorrection,
|
|
docsIfCmtsModFECCodewordLength,
|
|
docsIfCmtsModScramblerSeed,
|
|
docsIfCmtsModMaxBurstSize,
|
|
docsIfCmtsModGuardTimeSize,
|
|
docsIfCmtsModLastCodewordShortened,
|
|
docsIfCmtsModScrambler,
|
|
docsIfCmtsModByteInterleaverDepth,
|
|
docsIfCmtsModByteInterleaverBlockSize,
|
|
docsIfCmtsModPreambleType,
|
|
docsIfCmtsModTcmErrorCorrectionOn,
|
|
docsIfCmtsModScdmaInterleaverStepSize,
|
|
docsIfCmtsModScdmaSpreaderEnable,
|
|
docsIfCmtsModScdmaSubframeCodes,
|
|
docsIfCmtsModChannelType,
|
|
docsIfCmtsModStorageType,
|
|
docsIfCmtsQosProfilePermissions,
|
|
docsIfCmtsCmPtr,
|
|
docsIfCmtsChannelUtilizationInterval,
|
|
docsIfCmtsChannelUtUtilization,
|
|
docsIfCmtsDownChnlCtrId,
|
|
docsIfCmtsDownChnlCtrTotalBytes,
|
|
docsIfCmtsDownChnlCtrUsedBytes,
|
|
docsIfCmtsDownChnlCtrExtTotalBytes,
|
|
docsIfCmtsDownChnlCtrExtUsedBytes,
|
|
docsIfCmtsUpChnlCtrId,
|
|
docsIfCmtsUpChnlCtrTotalMslots,
|
|
docsIfCmtsUpChnlCtrUcastGrantedMslots,
|
|
docsIfCmtsUpChnlCtrTotalCntnMslots,
|
|
docsIfCmtsUpChnlCtrUsedCntnMslots,
|
|
docsIfCmtsUpChnlCtrExtTotalMslots,
|
|
docsIfCmtsUpChnlCtrExtUcastGrantedMslots,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnMslots,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnMslots,
|
|
docsIfCmtsUpChnlCtrCollCntnMslots,
|
|
docsIfCmtsUpChnlCtrTotalCntnReqMslots,
|
|
docsIfCmtsUpChnlCtrUsedCntnReqMslots,
|
|
docsIfCmtsUpChnlCtrCollCntnReqMslots,
|
|
docsIfCmtsUpChnlCtrTotalCntnReqDataMslots,
|
|
docsIfCmtsUpChnlCtrUsedCntnReqDataMslots,
|
|
docsIfCmtsUpChnlCtrCollCntnReqDataMslots,
|
|
docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots,
|
|
docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots,
|
|
docsIfCmtsUpChnlCtrCollCntnInitMaintMslots,
|
|
docsIfCmtsUpChnlCtrExtCollCntnMslots,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqMslots,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqMslots,
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqMslots,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots,
|
|
docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots,
|
|
docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots,
|
|
docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots,
|
|
docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots,
|
|
docsIfDownChannelStorageType,
|
|
docsIfQosProfStorageType
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects implemented in Cable Modem Termination
|
|
Systems."
|
|
::= { docsIfGroups 7 }
|
|
|
|
END
|