mibs/MIBS/comware/HH3C-VOICE-CALL-HISTORY-MIB
2023-12-05 12:25:34 +01:00

504 lines
18 KiB
Plaintext

-- ==========================================================================
-- Copyright (C) 2004-2010 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: The purpose of this MIB file is to provide the definition of
-- voice call record.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 2008-02-17 Initial version, created by Tian Xiaoqiang, Qu Jin
-- V1.1 2009-12-09 Add g729br8 to "Hh3cCodecType", Wang Tong
-- ==========================================================================
HH3C-VOICE-CALL-HISTORY-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Integer32, Gauge32
FROM SNMPv2-SMI
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
AbsoluteCounter32
FROM DIAL-CONTROL-MIB
TEXTUAL-CONVENTION, DisplayString, TimeStamp
FROM SNMPv2-TC
hh3cVoice
FROM HH3C-OID-MIB;
hh3cVoCallHistory MODULE-IDENTITY
LAST-UPDATED "200802170000Z"
ORGANIZATION
"New H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
Http://www.h3c.com
Zip:100085"
DESCRIPTION
"This MIB file is to provide the definition of voice call
history record information."
REVISION "200802170000Z"
DESCRIPTION
"The initial version of this MIB file."
::= { hh3cVoice 16 }
-- ======================================
-- Type declaration
-- ======================================
Hh3cGUid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a global call identifier. The global call identifier is
used as a unique identifier for an end-to-end call. A zero length
Hh3cGUid indicates no value for the global call identifier."
SYNTAX OCTET STRING(SIZE(0..16))
Hh3cCodecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of Codec."
SYNTAX INTEGER
{
g711a(1),
g711u(2),
g723r53(3),
g723r63(4),
g729r8(5),
g729a(6),
g726r16(7),
g726r24(8),
g726r32(9),
g726r40(10),
unknown(11),
g729br8(12)
}
hh3cVoiceCallHistoryObjects OBJECT IDENTIFIER ::= { hh3cVoCallHistory 1 }
-- ===========================================================================
-- hh3cCallHistoryTable
-- ===========================================================================
-- callHistoryTable
-- Table to store the past call information. The destination number
-- and the call connect and disconnect time, and the disconnection
-- cause are stored. These calls could be circuit switched or virtual
-- circuits. History of each and every call is stored, of successful
-- calls as well as of unsuccessful and rejected calls. An entry will
-- be created when a call is cleared.
hh3cCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about specific
calls to a specific destination."
::= { hh3cVoiceCallHistoryObjects 1 }
hh3cCallHistoryEntry OBJECT-TYPE
SYNTAX Hh3cCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single connection."
INDEX { hh3cCallHistoryIndex }
::= { hh3cCallHistoryTable 1 }
Hh3cCallHistoryEntry ::=
SEQUENCE {
hh3cCallHistoryIndex Integer32,
hh3cCallHistorySetupTime TimeStamp,
hh3cCallHistoryConnectTime TimeStamp,
hh3cCallHistoryTerminateTime TimeStamp,
hh3cCallHistoryPeerAddress DisplayString,
hh3cCallHistoryPeerId Integer32,
hh3cCallHistoryLogicalIfIndex InterfaceIndexOrZero,
hh3cCallHistoryCallOrigin INTEGER,
hh3cCallHistoryChargedUnits AbsoluteCounter32,
hh3cCallHistoryInfoType INTEGER,
hh3cCallHistoryTransmitPackets AbsoluteCounter32,
hh3cCallHistoryTransmitBytes AbsoluteCounter32,
hh3cCallHistoryReceivePackets AbsoluteCounter32,
hh3cCallHistoryReceiveBytes AbsoluteCounter32
}
hh3cCallHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the call history table. It's a monotonically
increasing integer for the sole purpose of indexing call
disconnection events. When it reaches to the maximum value,
the value will back to 1."
::= { hh3cCallHistoryEntry 1 }
hh3cCallHistorySetupTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was started."
::= { hh3cCallHistoryEntry 2 }
hh3cCallHistoryConnectTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was connected.
If the call is not connected, this object will have a
value of zero."
::= { hh3cCallHistoryEntry 3 }
hh3cCallHistoryTerminateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was terminated."
::= { hh3cCallHistoryEntry 4 }
hh3cCallHistoryPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number this call was connected to. If the number is
not available, it will have a length of zero."
::= { hh3cCallHistoryEntry 5 }
hh3cCallHistoryPeerId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a single peer. This is the Id value
of the peer table entry to which this call was made. If a
peer table entry for this call does not exist or is unknown,
the value of this object will be zero."
::= { hh3cCallHistoryEntry 6 }
hh3cCallHistoryLogicalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ifIndex value of the logical interface through
which this call was made. For ISDN media, this would be
the ifIndex of the B channel which was used for this call.
If the ifIndex value is unknown, the value of this object
will be zero."
::= { hh3cCallHistoryEntry 7 }
hh3cCallHistoryCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2),
callback(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call origin.
originate The call that is initiated.
answer The call that is accepted.
callback Either rejects the call and then calls back,
or uses the 'Reverse charging' information
element if it is available. Note that callback(3)
is supposed to control charging, not security,
and applies to callback prior to accepting a call.
Callback for security reasons can be handled using
PPP callback."
::= { hh3cCallHistoryEntry 8 }
hh3cCallHistoryChargedUnits OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero."
::= { hh3cCallHistoryEntry 9 }
hh3cCallHistoryInfoType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
speech(2),
unrestrictedDigital(3),
unrestrictedDigital56(4),
restrictedDigital(5),
audio31(6),
audio7(7),
video(8),
packetSwitched(9),
fax(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information type for this call.
other E.g. for non-isdn media.
speech Speech.
unrestrictedDigital Unrestricted digital information
with 64k rate adaption.
unrestrictedDigital56 Unrestricted digital information
with 56k rate adaption.
restrictedDigital Restricted digital information.
audio31 3.1 kHz audio.
audio7 7 kHz audio.
video Video.
packetSwitched Packetswitch.
fax Fax."
::= { hh3cCallHistoryEntry 10 }
hh3cCallHistoryTransmitPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were transmitted while this
call was active."
::= { hh3cCallHistoryEntry 11 }
hh3cCallHistoryTransmitBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were transmitted for this call."
::= { hh3cCallHistoryEntry 12 }
hh3cCallHistoryReceivePackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were received for this call."
::= { hh3cCallHistoryEntry 13 }
hh3cCallHistoryReceiveBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were received for this call."
::= { hh3cCallHistoryEntry 14 }
-- ===========================================================================
-- hh3cVoiceCallHistoryTable
-- ===========================================================================
hh3cVoiceCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cVoiceCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the voice extension to the call history table
of DIAL-CONTROL-MIB. It contains voice encapsulation call
leg information that is derived from the statistics of lower
layer telephony interface."
::= { hh3cVoiceCallHistoryObjects 2 }
hh3cVoiceCallHistoryEntry OBJECT-TYPE
SYNTAX Hh3cVoiceCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a extended voice call history information."
INDEX { hh3cCallHistoryIndex }
::= { hh3cVoiceCallHistoryTable 1 }
Hh3cVoiceCallHistoryEntry ::= SEQUENCE {
hh3cVoCallHistoryConnectionId Hh3cGUid,
hh3cVoCallHistoryTxDuration Gauge32,
hh3cVoCallHistoryVoiceTxDuration Gauge32,
hh3cVoCallHistoryFaxTxDuration Gauge32,
hh3cVoCallHistoryCoderType Hh3cCodecType,
hh3cVoCallHistoryImgPageCount Gauge32
}
hh3cVoCallHistoryConnectionId OBJECT-TYPE
SYNTAX Hh3cGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier of circuit switched network for
the gateway call."
::= { hh3cVoiceCallHistoryEntry 1 }
hh3cVoCallHistoryTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of transmit path open from this peer to the
voice gateway for the call. The units is milliseconds."
::= { hh3cVoiceCallHistoryEntry 2 }
hh3cVoCallHistoryVoiceTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice transmitted from this peer to voice
gateway for this call. The voice utilization rate can be
obtained by dividing this by hh3cVoCallHistoryTxDuration object.
The units is milliseconds."
::= { hh3cVoiceCallHistoryEntry 3 }
hh3cVoCallHistoryFaxTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of fax transmitted from this peer to voice gateway
for this call. The fax utilization rate can be obtained by
dividing this by hh3cVoCallHistoryTxDuration object. The units
is milliseconds."
::= { hh3cVoiceCallHistoryEntry 4 }
hh3cVoCallHistoryCoderType OBJECT-TYPE
SYNTAX Hh3cCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder type. It specifies the encode type to
the PSTN leg of a call."
::= { hh3cVoiceCallHistoryEntry 5 }
hh3cVoCallHistoryImgPageCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fax related image pages are received or
transmitted via the peer for the call. The units is page."
::= { hh3cVoiceCallHistoryEntry 6 }
-- ===========================================================================
-- hh3cVoiceVoIPCallHistoryTable
-- ===========================================================================
hh3cVoiceVoIPCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cVoiceVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the VoIP extension to the call active table of
DIAL-CONTROL-MIB. It contains VoIP call leg information about
specific VoIP call destination."
::= { hh3cVoiceCallHistoryObjects 3 }
hh3cVoiceVoIPCallHistoryEntry OBJECT-TYPE
SYNTAX Hh3cVoiceVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a extended VoIP call history
information."
INDEX {hh3cCallHistoryIndex }
::= { hh3cVoiceVoIPCallHistoryTable 1 }
Hh3cVoiceVoIPCallHistoryEntry ::= SEQUENCE {
hh3cVoVoIPCallHistoryConnectionId Hh3cGUid,
hh3cVoVoIPCallHistoryRemSigIPType InetAddressType,
hh3cVoVoIPCallHistoryRemSigIPAddr InetAddress,
hh3cVoVoIPCallHistoryRemSigPort Integer32,
hh3cVoVoIPCallHistoryRemMedIPType InetAddressType,
hh3cVoVoIPCallHistoryRemMedIPAddr InetAddress,
hh3cVoVoIPCallHistoryRemMedPort Integer32,
hh3cVoVoIPCallHistorySessProtocol INTEGER,
hh3cVoVoIPCallHistoryCoderType Hh3cCodecType
}
hh3cVoVoIPCallHistoryConnectionId OBJECT-TYPE
SYNTAX Hh3cGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier of packet-switched network for the
gateway call."
::= { hh3cVoiceVoIPCallHistoryEntry 1 }
hh3cVoVoIPCallHistoryRemSigIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote system signalling IP address for the VoIP call."
::= { hh3cVoiceVoIPCallHistoryEntry 2 }
hh3cVoVoIPCallHistoryRemSigIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system signalling IP address for the VoIP call."
::= { hh3cVoiceVoIPCallHistoryEntry 3 }
hh3cVoVoIPCallHistoryRemSigPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener signalling port to which to
transmit voice packets."
::= { hh3cVoiceVoIPCallHistoryEntry 4 }
hh3cVoVoIPCallHistoryRemMedIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote system media IP address for the VoIP call."
::= { hh3cVoiceVoIPCallHistoryEntry 5 }
hh3cVoVoIPCallHistoryRemMedIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system media IP address for the VoIP call."
::= { hh3cVoiceVoIPCallHistoryEntry 6 }
hh3cVoVoIPCallHistoryRemMedPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener media port to which to transmit voice
packets."
::= { hh3cVoiceVoIPCallHistoryEntry 7 }
hh3cVoVoIPCallHistorySessProtocol OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
h323(2),
sip(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session protocol to be used for internet
call between local and remote router via IP backbone.
unknown The protocol is unknown.
h323 The protocol is H323.
sip The protocol is session initiation."
::= { hh3cVoiceVoIPCallHistoryEntry 8 }
hh3cVoVoIPCallHistoryCoderType OBJECT-TYPE
SYNTAX Hh3cCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder type. It specifies the encode type to the
VoIP leg of a call."
::= { hh3cVoiceVoIPCallHistoryEntry 9 }
END