851 lines
26 KiB
Plaintext
851 lines
26 KiB
Plaintext
-- *****************************************************************
|
|
-- dasan-bridge-mib.my
|
|
-- DASAN Enterprise Bridge MIBs
|
|
--
|
|
-- Aug 3. 2005 dhlee@da-san.com created.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
DASAN-BRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32, Gauge32, Counter64, Unsigned32,
|
|
Integer32, TimeTicks, mib-2,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString,
|
|
PhysAddress, TruthValue, RowStatus,
|
|
TimeStamp, AutonomousType, TestAndIncr
|
|
FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
dasanEvents,dasanMgmt,dasanModules
|
|
FROM DASAN-SMI
|
|
dasanSwitchMIBObjects,dsSwitchModules
|
|
FROM DASAN-SWITCH-MIB;
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6))
|
|
BridgeId ::= OCTET STRING (SIZE (8))
|
|
Timeout ::= INTEGER
|
|
|
|
|
|
dsBridge MODULE-IDENTITY
|
|
LAST-UPDATED "200508030000Z"
|
|
ORGANIZATION "Dasan Co., Ltd."
|
|
CONTACT-INFO
|
|
"Dasan Co., Ltd."
|
|
DESCRIPTION
|
|
"The MIB module to describe bridge of DASAN product."
|
|
::= { dsSwitchModules 22 }
|
|
|
|
dsTp OBJECT IDENTIFIER ::= { dsBridge 3 }
|
|
|
|
--
|
|
-- Textual Convention
|
|
--
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
VlanIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value used to index per-VLAN tables: values of 0 and
|
|
4095 are not permitted; if the value is between 1 and
|
|
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
|
|
global scope within a given bridged domain (see VlanId
|
|
textual convention). If the value is greater than 4095
|
|
then it represents a VLAN with scope local to the
|
|
particular agent, i.e. one without a global VLAN-ID
|
|
assigned to it. Such VLANs are outside the scope of
|
|
IEEE 802.1Q but it is convenient to be able to manage them
|
|
in the same way using this MIB."
|
|
SYNTAX Unsigned32
|
|
|
|
VlanId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 12-bit VLAN ID used in the VLAN Tag header."
|
|
SYNTAX INTEGER (1..4094)
|
|
|
|
|
|
|
|
--
|
|
-- dasanVlanBase
|
|
--
|
|
|
|
dsVlanBase OBJECT IDENTIFIER ::= { dsBridge 1 }
|
|
|
|
dsVlanVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version1(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of IEEE 802.1Q that this device
|
|
supports."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.1.1"
|
|
::= { dsVlanBase 1 }
|
|
|
|
dsVlanMaxVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum IEEE 802.1Q VLAN ID that this device
|
|
supports."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 9.3.2.3"
|
|
::= { dsVlanBase 2 }
|
|
|
|
dsVlanMaxSupportedVlans OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of VLANs that this
|
|
device supports."
|
|
::= { dsVlanBase 3 }
|
|
|
|
dsVlanNumVlans OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of VLANs that are
|
|
configured in this device."
|
|
::= { dsVlanBase 4 }
|
|
|
|
dsVlanGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status requested by management for
|
|
GVRP. The value enabled(1) indicates that GVRP should
|
|
be enabled on this device, on all ports for which it has
|
|
not been specifically disabled. When disabled(2), GVRP
|
|
is disabled on all ports and all GVRP packets will be
|
|
forwarded transparently. This object affects all GVRP
|
|
Applicant and Registrar state machines. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on all ports."
|
|
::= { dsVlanBase 5 }
|
|
|
|
--
|
|
-- dsVlanCurrentTable
|
|
--
|
|
dsVlanCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsVlanCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing current configuration information
|
|
for each VLAN currently configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
::= { dsBridge 2 }
|
|
|
|
dsVlanCurrentEntry OBJECT-TYPE
|
|
SYNTAX DsVlanCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information for a VLAN configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
INDEX { dsVlanIndex, dsVlanName}
|
|
::= { dsVlanCurrentTable 1 }
|
|
|
|
|
|
DsVlanCurrentEntry ::=
|
|
SEQUENCE {
|
|
dsVlanIndex
|
|
VlanIndex,
|
|
dsVlanName
|
|
OCTET STRING,
|
|
dsVlanFdbId
|
|
Unsigned32,
|
|
dsVlanCurrentEgressPorts
|
|
PortList,
|
|
dsVlanCurrentUntaggedPorts
|
|
PortList,
|
|
dsVlanStatus
|
|
INTEGER,
|
|
dsVlanCreationTime
|
|
TimeTicks,
|
|
dsVlanCurrentPhysicalPorts
|
|
PortList
|
|
}
|
|
|
|
dsVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID or other identifier refering to this VLAN."
|
|
::= { dsVlanCurrentEntry 1 }
|
|
|
|
dsVlanName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-NAME to this VLAN."
|
|
::= { dsVlanCurrentEntry 2 }
|
|
|
|
dsVlanFdbId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Filtering Database used by this VLAN. This value is
|
|
allocated automatically by the device whenever the VLAN
|
|
is created: either dynamically by GVRP, or by management,
|
|
in dot1qVlanStaticTable. Allocation of this value follows
|
|
the learning constraints defined for this VLAN in
|
|
dot1qLearningConstraintsTable."
|
|
::= { dsVlanCurrentEntry 3 }
|
|
|
|
dsVlanCurrentEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are transmitting traffic for
|
|
this VLAN as either tagged or untagged frames."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dsVlanCurrentEntry 4 }
|
|
|
|
dsVlanCurrentUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are transmitting traffic for
|
|
this VLAN as untagged frames."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dsVlanCurrentEntry 5 }
|
|
|
|
dsVlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
permanent(2),
|
|
dynamicGvrp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
other(1) - this entry is currently in use but the
|
|
conditions under which it will remain so differ
|
|
from the following values.
|
|
permanent(2) - this entry, corresponding to an entry
|
|
in dot1qVlanStaticTable, is currently in use and
|
|
will remain so after the next reset of the
|
|
device. The port lists for this entry include
|
|
ports from the equivalent dot1qVlanStaticTable
|
|
entry and ports learnt dynamically.
|
|
dynamicGvrp(3) - this entry is currently in use
|
|
|
|
|
|
and will remain so until removed by GVRP. There
|
|
is no static entry for this VLAN and it will be
|
|
removed when the last port leaves the VLAN."
|
|
::= { dsVlanCurrentEntry 6 }
|
|
|
|
dsVlanCreationTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when this VLAN was created."
|
|
::= { dsVlanCurrentEntry 7 }
|
|
|
|
dsVlanCurrentPhysicalPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are physical."
|
|
REFERENCE
|
|
"."
|
|
::= { dsVlanCurrentEntry 8 }
|
|
|
|
|
|
--
|
|
-- dsTpFdbTable
|
|
--
|
|
dsTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about unicast entries
|
|
for which the device has forwarding and/or filtering
|
|
information. This information is used by the
|
|
transparent bridging function in determining how to
|
|
propagate a received frame."
|
|
::= { dsTp 1 }
|
|
|
|
dsTpFdbEntry OBJECT-TYPE
|
|
SYNTAX DsTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a specific unicast MAC address for
|
|
which the device has some forwarding and/or filtering
|
|
information."
|
|
INDEX { dsTpFdbFid, dsTpFdbVlanName, dsTpFdbAddress }
|
|
::= { dsTpFdbTable 1 }
|
|
|
|
DsTpFdbEntry ::=
|
|
SEQUENCE {
|
|
dsTpFdbFid
|
|
INTEGER,
|
|
dsTpFdbVlanName
|
|
OCTET STRING,
|
|
dsTpFdbAddress
|
|
MacAddress,
|
|
dsTpFdbPort
|
|
Integer32,
|
|
dsTpFdbStatus
|
|
INTEGER
|
|
}
|
|
|
|
dsTpFdbFid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The identity of this Filtering Database."
|
|
::= { dsTpFdbEntry 1 }
|
|
|
|
dsTpFdbVlanName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The name of VLAN related to this Filtering Database."
|
|
::= { dsTpFdbEntry 2 }
|
|
|
|
dsTpFdbAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has
|
|
forwarding and/or filtering information."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
|
|
::= { dsTpFdbEntry 3 }
|
|
|
|
dsTpFdbPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the port number of the port on
|
|
which a frame having a source address equal to the value
|
|
of the corresponding instance of dsTpFdbAddress has
|
|
been seen."
|
|
::= { dsTpFdbEntry 4 }
|
|
|
|
dsTpFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of this entry. The meanings of the values
|
|
are:
|
|
other(1) - none of the following.
|
|
invalid(2) - this entry is no longer valid (e.g., it
|
|
was learned but has since aged out), but has not
|
|
yet been flushed from the table.
|
|
learned(3) - the value of the corresponding instance
|
|
of dsTpFdbPort was learned and is being used.
|
|
|
|
self(4) - the value of the corresponding instance of
|
|
dsTpFdbAddress represents one of the device's
|
|
addresses. The corresponding instance of
|
|
dsTpFdbPort indicates which of the device's
|
|
ports has this address.
|
|
mgmt(5) - the value of the corresponding instance of
|
|
dsTpFdbAddress is also the value of an
|
|
existing instance of dsStaticAddress."
|
|
::= { dsTpFdbEntry 5 }
|
|
|
|
|
|
--
|
|
-- dsStpBase
|
|
--
|
|
|
|
dsStpBase OBJECT IDENTIFIER ::= { dsBridge 4 }
|
|
|
|
--
|
|
-- dsStpTable
|
|
--
|
|
|
|
dsStpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of STP supported this device."
|
|
::= { dsBridge 5 }
|
|
|
|
dsStpEntry OBJECT-TYPE
|
|
SYNTAX DsStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of STP supported this device."
|
|
INDEX { dsStpIndex }
|
|
::= { dsStpTable 1 }
|
|
|
|
DsStpEntry ::=
|
|
SEQUENCE {
|
|
dsStpIndex
|
|
INTEGER,
|
|
dsStpVid
|
|
INTEGER,
|
|
dsStpProtocolSpecification
|
|
INTEGER,
|
|
dsStpPriority
|
|
Integer32,
|
|
dsStpTimeSinceTopologyChange
|
|
TimeTicks,
|
|
dsStpTopChanges
|
|
Counter,
|
|
dsStpDesignatedRoot
|
|
BridgeId,
|
|
dsStpRootCost
|
|
INTEGER,
|
|
dsStpRootPort
|
|
INTEGER,
|
|
dsStpMaxAge
|
|
Timeout,
|
|
dsStpHelloTime
|
|
Timeout,
|
|
dsStpHoldTime
|
|
INTEGER,
|
|
dsStpForwardDelay
|
|
Timeout,
|
|
dsStpBridgeMaxAge
|
|
Timeout,
|
|
dsStpBridgeHelloTime
|
|
Timeout,
|
|
dsStpBridgeForwardDelay
|
|
Timeout
|
|
}
|
|
|
|
dsStpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dsStpEntry 1}
|
|
|
|
dsStpVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dsStpEntry 2}
|
|
|
|
dsStpProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of what version of the Spanning
|
|
Tree Protocol is being run. The value
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|
Spanning Tree protocol. IEEE 802.1d
|
|
implementations will return 'ieee8021d(3)'. If
|
|
future versions of the IEEE Spanning Tree Protocol
|
|
are released that are incompatible with the
|
|
current version a new value will be defined."
|
|
::= { dsStpEntry 3 }
|
|
|
|
dsStpPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the write-able portion of the Bridge
|
|
ID, i.e., the first two octets of the (8 octet
|
|
long) Bridge ID. The other (last) 6 octets of the
|
|
Bridge ID are given by the value of
|
|
dot1dBaseBridgeAddress."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.7"
|
|
::= { dsStpEntry 4 }
|
|
|
|
dsStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { dsStpEntry 5 }
|
|
|
|
dsStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { dsStpEntry 6 }
|
|
|
|
dsStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge identifier of the root of the spanning
|
|
tree as determined by the Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.1"
|
|
::= { dsStpEntry 7 }
|
|
|
|
dsStpRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of the path to the root as seen from
|
|
this bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.2"
|
|
::= { dsStpEntry 8 }
|
|
|
|
dsStpRootPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.3"
|
|
::= { dsStpEntry 9 }
|
|
|
|
dsStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.4"
|
|
::= { dsStpEntry 10 }
|
|
|
|
dsStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.5"
|
|
::= { dsStpEntry 11 }
|
|
|
|
dsStpHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.14"
|
|
::= { dsStpEntry 12 }
|
|
|
|
dsStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dStpBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.6"
|
|
::= { dsStpEntry 13 }
|
|
|
|
dsStpBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout (600..4000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges use for MaxAge when
|
|
this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
dot1dStpBridgeHelloTime. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.8"
|
|
::= { dsStpEntry 14 }
|
|
|
|
dsStpBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout (100..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges use for HelloTime when
|
|
this bridge is acting as the root. The
|
|
granularity of this timer is specified by 802.1D-
|
|
1990 to be 1 second. An agent may return a
|
|
badValue error if a set is attempted to a value
|
|
which is not a whole number of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.9"
|
|
::= { dsStpEntry 15 }
|
|
|
|
dsStpBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout (400..3000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges use for ForwardDelay
|
|
when this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
dot1dStpBridgeMaxAge. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.10"
|
|
::= { dsStpEntry 16 }
|
|
|
|
--
|
|
-- dsStpPortTable
|
|
--
|
|
dsStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table of STP supported this device."
|
|
::= { dsBridge 6 }
|
|
|
|
dsStpPortEntry OBJECT-TYPE
|
|
SYNTAX DsStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table of STP supported this device."
|
|
INDEX { dsStpIndex, dsStpPort }
|
|
::= { dsStpPortTable 1 }
|
|
|
|
DsStpPortEntry ::=
|
|
SEQUENCE {
|
|
dsStpPort
|
|
Integer32,
|
|
dsStpPortPriority
|
|
Integer32,
|
|
dsStpPortState
|
|
INTEGER,
|
|
dsStpPortEnable
|
|
INTEGER,
|
|
dsStpPortPathCost
|
|
Integer32,
|
|
dsStpPortDesignatedRoot
|
|
BridgeId,
|
|
dsStpPortDesignatedCost
|
|
INTEGER,
|
|
dsStpPortDesignatedBridge
|
|
BridgeId,
|
|
dsStpPortDesignatedPort
|
|
OCTET STRING,
|
|
dsStpPortForwardTransitions
|
|
Counter
|
|
}
|
|
|
|
dsStpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
::= { dsStpPortEntry 1 }
|
|
|
|
dsStpPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the priority field which is
|
|
contained in the first (in network byte order)
|
|
octet of the (2 octet long) Port ID. The other
|
|
octet of the Port ID is given by the value of
|
|
dot1dStpPort."
|
|
::= { dsStpPortEntry 2 }
|
|
|
|
dsStpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's current state as defined by
|
|
application of the Spanning Tree Protocol. This
|
|
state controls what action a port takes on
|
|
reception of a frame. If the bridge has detected
|
|
a port that is malfunctioning it will place that
|
|
port into the broken(6) state. For ports which
|
|
are disabled (see dsStpPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
::= { dsStpPortEntry 3 }
|
|
|
|
dsStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
::= { dsStpPortEntry 4 }
|
|
|
|
dsStpPortPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
::= { dsStpPortEntry 5 }
|
|
|
|
dsStpPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
::= { dsStpPortEntry 6 }
|
|
|
|
dsStpPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
::= { dsStpPortEntry 7 }
|
|
|
|
dsStpPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
::= { dsStpPortEntry 8 }
|
|
|
|
dsStpPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
::= { dsStpPortEntry 9 }
|
|
|
|
dsStpPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { dsStpPortEntry 10 }
|
|
END
|