2987 lines
92 KiB
Plaintext
2987 lines
92 KiB
Plaintext
--
|
|
-- sle-rmon-mib.mib
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
|
|
-- Tuesday, December 22, 2015 at 14:23:02
|
|
--
|
|
|
|
-- SLE-RMON-MIB.my
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
|
|
-- Monday, January 22, 2007 at 16:52:34
|
|
--
|
|
|
|
SLE-RMON-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
sleMgmt
|
|
FROM DASAN-SMI
|
|
SleControlStatusType, SleControlRequestResultType
|
|
FROM SLE-TC-MIB
|
|
OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeTicks, Integer32, Gauge32, Counter32, OBJECT-TYPE,
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
-- sle
|
|
-- FROM AN-MIB
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9
|
|
-- December 08, 2004 at 09:03 GMT
|
|
-- December 08, 2004 at 08:40 GMT
|
|
-- 1.3.6.1.4.1.6296.101.9
|
|
sleRmon MODULE-IDENTITY
|
|
LAST-UPDATED "200412080903Z" -- December 08, 2004 at 09:03 GMT
|
|
ORGANIZATION
|
|
"ORGANIZATION"
|
|
CONTACT-INFO
|
|
"Contact "
|
|
DESCRIPTION
|
|
"This MIB contains all needed informations about rmon and
|
|
all supported sle rmon features."
|
|
REVISION "200412080840Z" -- December 08, 2004 at 08:40 GMT
|
|
DESCRIPTION
|
|
"AFI"
|
|
::= { sleMgmt 9 }
|
|
|
|
|
|
|
|
--
|
|
-- Type definitions
|
|
--
|
|
|
|
-- Type definitions
|
|
--
|
|
-- ::= { sle 14 }
|
|
-- textual conventions
|
|
OwnerString ::= OCTET STRING (SIZE (0..255))
|
|
|
|
-- This data type is used to model an administratively
|
|
-- assigned name of the owner of a resource. This
|
|
-- information is taken from the NVT ASCII character
|
|
-- set. It is suggested that this name contain one or
|
|
-- more of the following: IP address, management station
|
|
-- name, network manager's name, location, or phone
|
|
-- number.
|
|
-- In some cases the agent itself will be the owner of
|
|
-- an entry. In these cases, this string shall be set
|
|
-- to a string starting with 'monitor'.
|
|
--
|
|
-- SNMP access control is articulated entirely in terms
|
|
-- of the contents of MIB views; access to a particular
|
|
-- SNMP object instance depends only upon its presence
|
|
-- or absence in a particular MIB view and never upon
|
|
-- its value or the value of related object instances.
|
|
-- Thus, objects of this type afford resolution of
|
|
-- resource contention only among cooperating managers;
|
|
-- they realize no access control function with respect
|
|
-- to uncooperative parties.
|
|
--
|
|
-- By convention, objects with this syntax are declared as
|
|
-- having
|
|
--
|
|
-- SIZE (0..127)
|
|
SleEntryStatus ::= INTEGER
|
|
{
|
|
valid(1),
|
|
createRequest(2),
|
|
underCreation(3)
|
|
}
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.1
|
|
-- 1.3.6.1.4.1.6296.101.9.1
|
|
sleHistory OBJECT IDENTIFIER ::= { sleRmon 1 }
|
|
|
|
|
|
-- The sleHistory Control Group
|
|
-- Implementation of the History Control group is optional.
|
|
--
|
|
-- The sleHistory control group controls the periodic statistical
|
|
-- sampling of data from various types of networks. The
|
|
-- historyControlTable stores configuration entries that each
|
|
-- define an interface, polling period, and other parameters.
|
|
-- Once samples are taken, their data is stored in an entry
|
|
-- in a media-specific table. Each such entry defines one
|
|
-- sample, and is associated with the historyControlEntry that
|
|
-- caused the sample to be taken. Each counter in the
|
|
-- etherHistoryEntry counts the same event as its
|
|
-- similarly-named counterpart in the etherStatsEntry,
|
|
-- except that each value here is a cumulative sum during a
|
|
-- sampling period.
|
|
--
|
|
-- If the probe keeps track of the time of day, it should
|
|
-- start the first sample of the history at a time such that
|
|
-- when the next hour of the day begins, a sample is
|
|
-- started at that instant. This tends to make more
|
|
-- user-friendly reports, and enables comparison of reports
|
|
-- from different probes that have relatively accurate time
|
|
-- of day.
|
|
--
|
|
-- The probe is encouraged to add two history control entries
|
|
-- per monitored interface upon initialization that describe
|
|
-- a short term and a long term polling period. Suggested
|
|
-- parameters are 30 seconds for the short term polling period
|
|
-- and 30 minutes for the long term period.
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1
|
|
sleHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SleHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of history control entries."
|
|
::= { sleHistory 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1
|
|
sleHistoryEntry OBJECT-TYPE
|
|
SYNTAX SleHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of parameters that set up a periodic sampling
|
|
of statistics. As an example, an instance of the
|
|
sleHistoryControlInterval object might be named
|
|
sleHistoryControlInterval.2"
|
|
INDEX { sleHistoryIndex }
|
|
::= { sleHistoryTable 1 }
|
|
|
|
|
|
SleHistoryEntry ::=
|
|
SEQUENCE {
|
|
sleHistoryIndex
|
|
INTEGER,
|
|
sleHistoryDataSource
|
|
OBJECT IDENTIFIER,
|
|
sleHistoryBucketsRequested
|
|
INTEGER,
|
|
sleHistoryBucketsGranted
|
|
INTEGER,
|
|
sleHistoryInterval
|
|
INTEGER,
|
|
sleHistoryOwner
|
|
OwnerString,
|
|
sleHistoryStatus
|
|
SleEntryStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.1
|
|
sleHistoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
historyControl table. Each such entry defines a
|
|
set of samples at a particular interval for an
|
|
interface on the device."
|
|
::= { sleHistoryEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.2
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.2
|
|
sleHistoryDataSource OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the source of the data for
|
|
which historical data was collected and
|
|
placed in a media-specific table on behalf of this
|
|
historyControlEntry. This source can be any
|
|
interface on this device. In order to identify
|
|
a particular interface, this object shall identify
|
|
the instance of the ifIndex object, defined
|
|
in RFC 1213 and RFC 1573 [4,6], for the desired
|
|
interface. For example, if an entry were to receive
|
|
data from interface #1, this object would be set
|
|
to ifIndex.1.
|
|
|
|
The statistics in this group reflect all packets
|
|
on the local network segment attached to the
|
|
identified interface.
|
|
|
|
An agent may or may not be able to tell if fundamental
|
|
changes to the media of the interface have occurred
|
|
and necessitate an invalidation of this entry. For
|
|
example, a hot-pluggable ethernet card could be
|
|
pulled out and replaced by a token-ring card. In
|
|
such a case, if the agent has such knowledge of the
|
|
change, it is recommended that it invalidate this
|
|
entry.
|
|
|
|
This object may not be modified if the associated
|
|
historyControlStatus object is equal to valid(1)."
|
|
::= { sleHistoryEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.3
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.3
|
|
sleHistoryBucketsRequested OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The requested number of discrete time intervals
|
|
over which data is to be saved in the part of the
|
|
media-specific table associated with this
|
|
historyControlEntry.
|
|
|
|
When this object is created or modified, the probe
|
|
should set historyControlBucketsGranted as closely to
|
|
this object as is possible for the particular probe
|
|
implementation and available resources."
|
|
DEFVAL { 50 }
|
|
::= { sleHistoryEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.4
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.4
|
|
sleHistoryBucketsGranted OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of discrete sampling intervals
|
|
over which data shall be saved in the part of
|
|
the media-specific table associated with this
|
|
historyControlEntry.
|
|
|
|
When the associated historyControlBucketsRequested
|
|
object is created or modified, the probe
|
|
should set this object as closely to the requested
|
|
value as is possible for the particular
|
|
probe implementation and available resources. The
|
|
probe must not lower this value except as a result
|
|
of a modification to the associated
|
|
historyControlBucketsRequested object.
|
|
|
|
There will be times when the actual number of
|
|
buckets associated with this entry is less than
|
|
the value of this object. In this case, at the
|
|
end of each sampling interval, a new bucket will
|
|
be added to the media-specific table.
|
|
|
|
When the number of buckets reaches the value of
|
|
this object and a new bucket is to be added to the
|
|
media-specific table, the oldest bucket associated
|
|
with this historyControlEntry shall be deleted by
|
|
the agent so that the new bucket can be added.
|
|
|
|
When the value of this object changes to a value less
|
|
than the current value, entries are deleted
|
|
from the media-specific table associated with this
|
|
historyControlEntry. Enough of the oldest of these
|
|
entries shall be deleted by the agent so that their
|
|
number remains less than or equal to the new value of
|
|
this object.
|
|
|
|
When the value of this object changes to a value
|
|
greater than the current value, the number of
|
|
associated media- specific entries may be allowed to
|
|
grow."
|
|
::= { sleHistoryEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.5
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.5
|
|
sleHistoryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is
|
|
sampled for each bucket in the part of the
|
|
media-specific table associated with this
|
|
historyControlEntry. This interval can
|
|
be set to any number of seconds between 1 and
|
|
3600 (1 hour).
|
|
|
|
Because the counters in a bucket may overflow at their
|
|
maximum value with no indication, a prudent manager
|
|
will take into account the possibility of overflow
|
|
in any of the associated counters. It is important
|
|
to consider the minimum time in which any counter
|
|
could overflow on a particular media type and set
|
|
the historyControlInterval object to a value less
|
|
than this interval. This is typically most
|
|
important for the 'octets' counter in any
|
|
media-specific table. For example, on an Ethernet
|
|
network, the etherHistoryOctets counter could
|
|
overflow in about one hour at the Ethernet's maximum
|
|
utilization.
|
|
|
|
This object may not be modified if the associated
|
|
historyControlStatus object is equal to valid(1)."
|
|
DEFVAL { 1800 }
|
|
::= { sleHistoryEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.6
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.6
|
|
sleHistoryOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it."
|
|
::= { sleHistoryEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.7
|
|
-- 1.3.6.1.4.1.6296.101.9.1.1.1.7
|
|
sleHistoryStatus OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this historyControl entry.
|
|
|
|
Each instance of the media-specific table associated
|
|
with this historyControlEntry will be deleted by the
|
|
agent if this historyControlEntry is not equal to
|
|
valid(1)."
|
|
::= { sleHistoryEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2
|
|
sleHistoryControl OBJECT IDENTIFIER ::= { sleHistory 2 }
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.1
|
|
sleHistoryControlRequest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createHistory(1),
|
|
destroyHistory(2),
|
|
setHistoryProfile(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
createHistory:
|
|
sleHistoryControlIndex
|
|
sleHistoryControlDataSource
|
|
sleHistoryControlBucketsRequested
|
|
sleHistoryControlInterval
|
|
sleHistoryControlOwner
|
|
sleHistoryControlSts
|
|
|
|
destroyHistory:
|
|
sleHistoryControlIndex
|
|
|
|
setHistoryProfile:
|
|
sleHistoryControlIndex
|
|
sleHistoryControlDataSource
|
|
sleHistoryControlBucketsRequested
|
|
sleHistoryControlInterval
|
|
sleHistoryControlOwner
|
|
sleHistoryControlSts
|
|
|
|
"
|
|
::= { sleHistoryControl 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.2
|
|
sleHistoryControlStatus OBJECT-TYPE
|
|
SYNTAX SleControlStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a user command.
|
|
"
|
|
::= { sleHistoryControl 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.3
|
|
sleHistoryControlTimer OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum wait time for the manager for a long running user command.
|
|
"
|
|
::= { sleHistoryControl 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.4
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.4
|
|
sleHistoryControlTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time stamp of the last command (end of command)."
|
|
::= { sleHistoryControl 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.5
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.5
|
|
sleHistoryControlReqResult OBJECT-TYPE
|
|
SYNTAX SleControlRequestResultType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last user command."
|
|
::= { sleHistoryControl 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.6
|
|
sleHistoryControlIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleHistoryControl 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.7
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.7
|
|
sleHistoryControlDataSource OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the source of the data for
|
|
which historical data was collected and
|
|
placed in a media-specific table on behalf of this
|
|
historyControlEntry. This source can be any
|
|
interface on this device. In order to identify
|
|
a particular interface, this object shall identify
|
|
the instance of the ifIndex object, defined
|
|
in RFC 1213 and RFC 1573 [4,6], for the desired
|
|
interface. For example, if an entry were to receive
|
|
data from interface #1, this object would be set
|
|
to ifIndex.1.
|
|
|
|
The statistics in this group reflect all packets
|
|
on the local network segment attached to the
|
|
identified interface.
|
|
|
|
An agent may or may not be able to tell if fundamental
|
|
changes to the media of the interface have occurred
|
|
and necessitate an invalidation of this entry. For
|
|
example, a hot-pluggable ethernet card could be
|
|
pulled out and replaced by a token-ring card. In
|
|
such a case, if the agent has such knowledge of the
|
|
change, it is recommended that it invalidate this
|
|
entry.
|
|
|
|
This object may not be modified if the associated
|
|
historyControlStatus object is equal to valid(1)."
|
|
::= { sleHistoryControl 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.8
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.8
|
|
sleHistoryControlBucketsRequested OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The requested number of discrete time intervals
|
|
over which data is to be saved in the part of the
|
|
media-specific table associated with this
|
|
historyControlEntry.
|
|
|
|
When this object is created or modified, the probe
|
|
should set historyControlBucketsGranted as closely to
|
|
this object as is possible for the particular probe
|
|
implementation and available resources."
|
|
DEFVAL { 50 }
|
|
::= { sleHistoryControl 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.9
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.9
|
|
sleHistoryControlInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is
|
|
sampled for each bucket in the part of the
|
|
media-specific table associated with this
|
|
historyControlEntry. This interval can
|
|
be set to any number of seconds between 1 and
|
|
3600 (1 hour).
|
|
|
|
Because the counters in a bucket may overflow at their
|
|
maximum value with no indication, a prudent manager
|
|
will take into account the possibility of overflow
|
|
in any of the associated counters. It is important
|
|
to consider the minimum time in which any counter
|
|
could overflow on a particular media type and set
|
|
the historyControlInterval object to a value less
|
|
than this interval. This is typically most
|
|
important for the 'octets' counter in any
|
|
media-specific table. For example, on an Ethernet
|
|
network, the etherHistoryOctets counter could
|
|
overflow in about one hour at the Ethernet's maximum
|
|
utilization.
|
|
|
|
This object may not be modified if the associated
|
|
historyControlStatus object is equal to valid(1)."
|
|
DEFVAL { 1800 }
|
|
::= { sleHistoryControl 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.10
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.10
|
|
sleHistoryControlOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it."
|
|
::= { sleHistoryControl 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.11
|
|
-- 1.3.6.1.4.1.6296.101.9.1.2.11
|
|
sleHistoryControlSts OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this historyControl entry.
|
|
|
|
Each instance of the media-specific table associated
|
|
with this historyControlEntry will be deleted by the
|
|
agent if this historyControlEntry is not equal to
|
|
valid(1)."
|
|
::= { sleHistoryControl 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3
|
|
sleHistoryNotification OBJECT IDENTIFIER ::= { sleHistory 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3.1
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3.1
|
|
sleHistoryCreated NOTIFICATION-TYPE
|
|
OBJECTS { sleHistoryDataSource, sleHistoryBucketsRequested, sleHistoryInterval, sleHistoryOwner, sleHistoryStatus,
|
|
sleHistoryControlRequest, sleHistoryControlTimeStamp, sleHistoryControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleHistoryNotification 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3.2
|
|
sleHistoryDestroyed NOTIFICATION-TYPE
|
|
OBJECTS { sleHistoryIndex, sleHistoryControlRequest, sleHistoryControlTimeStamp, sleHistoryControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleHistoryNotification 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3.3
|
|
-- 1.3.6.1.4.1.6296.101.9.1.3.3
|
|
sleHistoryProfileChanged NOTIFICATION-TYPE
|
|
OBJECTS { sleHistoryDataSource, sleHistoryBucketsRequested, sleHistoryInterval, sleHistoryOwner, sleHistoryStatus,
|
|
sleHistoryControlRequest, sleHistoryControlTimeStamp, sleHistoryControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleHistoryNotification 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2
|
|
-- 1.3.6.1.4.1.6296.101.9.2
|
|
sleAlarm OBJECT IDENTIFIER ::= { sleRmon 2 }
|
|
|
|
|
|
-- The sleAlarm Group
|
|
-- Implementation of the Alarm group is optional.
|
|
--
|
|
-- The sleAlarm Group requires the implementation of the Event
|
|
-- group.
|
|
--
|
|
-- The sleAlarm group periodically takes
|
|
-- statistical samples from variables in the probe and
|
|
-- compares them to thresholds that have been
|
|
-- configured. The alarm table stores configuration
|
|
-- entries that each define a variable, polling period,
|
|
-- and threshold parameters. If a sample is found to
|
|
-- cross the threshold values, an event is generated.
|
|
-- Only variables that resolve to an ASN.1 primitive
|
|
-- type of INTEGER (INTEGER, Counter, Gauge, or
|
|
-- TimeTicks) may be monitored in this way.
|
|
--
|
|
-- This function has a hysteresis mechanism to limit
|
|
-- the generation of events. This mechanism generates
|
|
-- one event as a threshold is crossed in the
|
|
-- appropriate direction. No more events are generated
|
|
-- for that threshold until the opposite threshold is
|
|
-- crossed.
|
|
--
|
|
-- In the case of a sampling a deltaValue, a probe may
|
|
-- implement this mechanism with more precision if it
|
|
-- takes a delta sample twice per period, each time
|
|
-- comparing the sum of the latest two samples to the
|
|
-- threshold. This allows the detection of threshold
|
|
-- crossings that span the sampling boundary. Note
|
|
-- that this does not require any special configuration
|
|
-- of the threshold value. It is suggested that probes
|
|
-- implement this more precise algorithm.
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1
|
|
sleAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SleAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of alarm entries."
|
|
::= { sleAlarm 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1
|
|
sleAlarmEntry OBJECT-TYPE
|
|
SYNTAX SleAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of parameters that set up a periodic checking
|
|
for alarm conditions. For example, an instance of the
|
|
sleAlarmValue object might be named sleAlarmValue.8"
|
|
INDEX { sleAlarmIndex }
|
|
::= { sleAlarmTable 1 }
|
|
|
|
|
|
SleAlarmEntry ::=
|
|
SEQUENCE {
|
|
sleAlarmIndex
|
|
INTEGER,
|
|
sleAlarmInterval
|
|
Integer32,
|
|
sleAlarmVariable
|
|
OBJECT IDENTIFIER,
|
|
sleAlarmSampleType
|
|
INTEGER,
|
|
sleAlarmValue
|
|
Integer32,
|
|
sleAlarmStartupAlarm
|
|
INTEGER,
|
|
sleAlarmRisingThreshold
|
|
Integer32,
|
|
sleAlarmFallingThreshold
|
|
Integer32,
|
|
sleAlarmRisingEventIndex
|
|
INTEGER,
|
|
sleAlarmFallingEventIndex
|
|
INTEGER,
|
|
sleAlarmOwner
|
|
OwnerString,
|
|
sleAlarmStatus
|
|
SleEntryStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.1
|
|
sleAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
alarm table. Each such entry defines a
|
|
diagnostic sample at a particular interval
|
|
for an object on the device."
|
|
::= { sleAlarmEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.2
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.2
|
|
sleAlarmInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is
|
|
sampled and compared with the rising and falling
|
|
thresholds. When setting this variable, care
|
|
should be taken in the case of deltaValue
|
|
sampling - the interval should be set short enough
|
|
that the sampled variable is very unlikely to
|
|
increase or decrease by more than 2^31 - 1 during
|
|
a single sampling interval.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.3
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.3
|
|
sleAlarmVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of the particular variable to
|
|
be sampled. Only variables that resolve to an ASN.1
|
|
primitive type of INTEGER (INTEGER, Counter, Gauge,
|
|
or TimeTicks) may be sampled.
|
|
|
|
Because SNMP access control is articulated entirely
|
|
in terms of the contents of MIB views, no access
|
|
control mechanism exists that can restrict the value
|
|
of this object to identify only those objects that
|
|
exist in a particular MIB view. Because there is
|
|
thus no acceptable means of restricting the read
|
|
access that could be obtained through the alarm
|
|
mechanism, the probe must only grant write access to
|
|
this object in those views that have read access to
|
|
all objects on the probe.
|
|
|
|
During a set operation, if the supplied variable
|
|
name is not available in the selected MIB view, a
|
|
badValue error must be returned. If at any time the
|
|
variable name of an establisled alarmEntry is no
|
|
longer available in the selected MIB view, the probe
|
|
must change the status of this alarmEntry to
|
|
invalid(4).
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.4
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.4
|
|
sleAlarmSampleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
absoluteValue(1),
|
|
deltaValue(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The method of sampling the selected variable and
|
|
calculating the value to be compared against the
|
|
thresholds. If the value of this object is
|
|
absoluteValue(1), the value of the selected variable
|
|
will be compared directly with the thresholds at the
|
|
end of the sampling interval. If the value of this
|
|
object is deltaValue(2), the value of the selected
|
|
variable at the last sample will be subtracted from
|
|
the current value, and the difference compared with
|
|
the thresholds.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.5
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.5
|
|
sleAlarmValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the statistic during the last sampling
|
|
period. For example, if the sample type is
|
|
deltaValue, this value will be the difference
|
|
between the samples at the beginning and end of the
|
|
period. If the sample type is absoluteValue, this
|
|
value will be the sampled value at the end of the
|
|
period.
|
|
|
|
This is the value that is compared with the rising and
|
|
falling thresholds.
|
|
|
|
The value during the current sampling period is not
|
|
made available until the period is completed and will
|
|
remain available until the next period completes."
|
|
::= { sleAlarmEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.6
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.6
|
|
sleAlarmStartupAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
risingAlarm(1),
|
|
fallingAlarm(2),
|
|
risingOrFallingAlarm(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm that may be sent when this entry is first
|
|
set to valid. If the first sample after this entry
|
|
becomes valid is greater than or equal to the
|
|
risingThreshold and alarmStartupAlarm is equal to
|
|
risingAlarm(1) or risingOrFallingAlarm(3), then a
|
|
single rising alarm will be generated. If the first
|
|
sample after this entry becomes valid is less than
|
|
or equal to the fallingThreshold and
|
|
alarmStartupAlarm is equal to fallingAlarm(2) or
|
|
risingOrFallingAlarm(3), then a single falling alarm
|
|
will be generated.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.7
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.7
|
|
sleAlarmRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold for the sampled statistic. When the
|
|
current sampled value is greater than or equal to
|
|
this threshold, and the value at the last sampling
|
|
interval was less than this threshold, a single
|
|
event will be generated. A single event will also
|
|
be generated if the first sample after this entry
|
|
becomes valid is greater than or equal to this
|
|
threshold and the associated alarmStartupAlarm is
|
|
equal to risingAlarm(1) or risingOrFallingAlarm(3).
|
|
|
|
After a rising event is generated, another such event
|
|
will not be generated until the sampled value
|
|
falls below this threshold and reaches the
|
|
alarmFallingThreshold.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.8
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.8
|
|
sleAlarmFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold for the sampled statistic. When the
|
|
current sampled value is less than or equal to this
|
|
threshold, and the value at the last sampling
|
|
interval was greater than this threshold, a single
|
|
event will be generated. A single event will also
|
|
be generated if the first sample after this entry
|
|
becomes valid is less than or equal to this
|
|
threshold and the associated alarmStartupAlarm is
|
|
equal to fallingAlarm(2) or risingOrFallingAlarm(3).
|
|
|
|
After a falling event is generated, another such event
|
|
will not be generated until the sampled value
|
|
rises above this threshold and reaches the
|
|
alarmRisingThreshold.
|
|
|
|
This object may not be modified if the associated
|
|
sleAlarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.9
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.9
|
|
sleAlarmRisingEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the eventEntry that is
|
|
used when a rising threshold is crossed. The
|
|
eventEntry identified by a particular value of
|
|
this index is the same as identified by the same value
|
|
of the eventIndex object. If there is no
|
|
corresponding entry in the eventTable, then
|
|
no association exists. In particular, if this value
|
|
is zero, no associated event will be generated, as
|
|
zero is not a valid event index.
|
|
|
|
This object may not be modified if the associated
|
|
sleAlarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.10
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.10
|
|
sleAlarmFallingEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the eventEntry that is
|
|
used when a falling threshold is crossed. The
|
|
eventEntry identified by a particular value of
|
|
this index is the same as identified by the same value
|
|
of the eventIndex object. If there is no
|
|
corresponding entry in the eventTable, then
|
|
no association exists. In particular, if this value
|
|
is zero, no associated event will be generated, as
|
|
zero is not a valid event index.
|
|
|
|
This object may not be modified if the associated
|
|
sleAlarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmEntry 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.11
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.11
|
|
sleAlarmOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it."
|
|
::= { sleAlarmEntry 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.12
|
|
-- 1.3.6.1.4.1.6296.101.9.2.1.1.12
|
|
sleAlarmStatus OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this alarm entry."
|
|
::= { sleAlarmEntry 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2
|
|
sleAlarmControl OBJECT IDENTIFIER ::= { sleAlarm 2 }
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.1
|
|
sleAlarmControlRequest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAlarm(1),
|
|
destroyAlarm(2),
|
|
setAlarmProfile(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
createAlarm:
|
|
(sleAlarmControlIndex)
|
|
sleAlarmInterval
|
|
sleAlarmControlVariable
|
|
sleAlarmControlSampleType
|
|
sleAlarmControlStartupAlarm
|
|
sleAlarmControlRisingThreshold
|
|
sleAlarmControlFallingThreshold
|
|
sleAlarmControlRisingEventIndex
|
|
sleAlarmControlFallingEventIndex
|
|
sleAlarmControlOwner
|
|
sleAlarmControlSts
|
|
|
|
destroyAlarm:
|
|
sleAlarmControlIndex
|
|
|
|
setAlarmProfile:
|
|
sleAlarmControlIndex
|
|
sleAlarmControlInterval
|
|
sleAlarmControlVariable
|
|
sleAlarmControlSampleType
|
|
sleAlarmControlStartupAlarm
|
|
sleAlarmControlRisingThreshold
|
|
sleAlarmControlFallingThreshold
|
|
sleAlarmControlRisingEventIndex
|
|
sleAlarmControlFallingEventIndex
|
|
sleAlarmControlOwner
|
|
sleAlarmControlSts
|
|
|
|
"
|
|
::= { sleAlarmControl 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.2
|
|
sleAlarmControlStatus OBJECT-TYPE
|
|
SYNTAX SleControlStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a user command.
|
|
"
|
|
::= { sleAlarmControl 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.3
|
|
sleAlarmControlTimer OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum wait time for the manager for a long running user command.
|
|
"
|
|
::= { sleAlarmControl 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.4
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.4
|
|
sleAlarmControlTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time stamp of the last command (end of command)."
|
|
::= { sleAlarmControl 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.5
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.5
|
|
sleAlarmControlReqResult OBJECT-TYPE
|
|
SYNTAX SleControlRequestResultType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last user command."
|
|
::= { sleAlarmControl 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.6
|
|
sleAlarmControlIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleAlarmControl 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.7
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.7
|
|
sleAlarmControlInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is
|
|
sampled and compared with the rising and falling
|
|
thresholds. When setting this variable, care
|
|
should be taken in the case of deltaValue
|
|
sampling - the interval should be set short enough
|
|
that the sampled variable is very unlikely to
|
|
increase or decrease by more than 2^31 - 1 during
|
|
a single sampling interval.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.8
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.8
|
|
sleAlarmControlVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of the particular variable to
|
|
be sampled. Only variables that resolve to an ASN.1
|
|
primitive type of INTEGER (INTEGER, Counter, Gauge,
|
|
or TimeTicks) may be sampled.
|
|
|
|
Because SNMP access control is articulated entirely
|
|
in terms of the contents of MIB views, no access
|
|
control mechanism exists that can restrict the value
|
|
of this object to identify only those objects that
|
|
exist in a particular MIB view. Because there is
|
|
thus no acceptable means of restricting the read
|
|
access that could be obtained through the alarm
|
|
mechanism, the probe must only grant write access to
|
|
this object in those views that have read access to
|
|
all objects on the probe.
|
|
|
|
During a set operation, if the supplied variable
|
|
name is not available in the selected MIB view, a
|
|
badValue error must be returned. If at any time the
|
|
variable name of an establisled alarmEntry is no
|
|
longer available in the selected MIB view, the probe
|
|
must change the status of this alarmEntry to
|
|
invalid(4).
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.9
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.9
|
|
sleAlarmControlSampleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
absoluteValue(1),
|
|
deltaValue(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The method of sampling the selected variable and
|
|
calculating the value to be compared against the
|
|
thresholds. If the value of this object is
|
|
absoluteValue(1), the value of the selected variable
|
|
will be compared directly with the thresholds at the
|
|
end of the sampling interval. If the value of this
|
|
object is deltaValue(2), the value of the selected
|
|
variable at the last sample will be subtracted from
|
|
the current value, and the difference compared with
|
|
the thresholds.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.10
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.10
|
|
sleAlarmControlStartupAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
risingAlarm(1),
|
|
fallingAlarm(2),
|
|
risingOrFallingAlarm(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm that may be sent when this entry is first
|
|
set to valid. If the first sample after this entry
|
|
becomes valid is greater than or equal to the
|
|
risingThreshold and alarmStartupAlarm is equal to
|
|
risingAlarm(1) or risingOrFallingAlarm(3), then a
|
|
single rising alarm will be generated. If the first
|
|
sample after this entry becomes valid is less than
|
|
or equal to the fallingThreshold and
|
|
alarmStartupAlarm is equal to fallingAlarm(2) or
|
|
risingOrFallingAlarm(3), then a single falling alarm
|
|
will be generated.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.11
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.11
|
|
sleAlarmControlRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold for the sampled statistic. When the
|
|
current sampled value is greater than or equal to
|
|
this threshold, and the value at the last sampling
|
|
interval was less than this threshold, a single
|
|
event will be generated. A single event will also
|
|
be generated if the first sample after this entry
|
|
becomes valid is greater than or equal to this
|
|
threshold and the associated alarmStartupAlarm is
|
|
equal to risingAlarm(1) or risingOrFallingAlarm(3).
|
|
|
|
After a rising event is generated, another such event
|
|
will not be generated until the sampled value
|
|
falls below this threshold and reaches the
|
|
alarmFallingThreshold.
|
|
|
|
This object may not be modified if the associated
|
|
alarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.12
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.12
|
|
sleAlarmControlFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold for the sampled statistic. When the
|
|
current sampled value is less than or equal to this
|
|
threshold, and the value at the last sampling
|
|
interval was greater than this threshold, a single
|
|
event will be generated. A single event will also
|
|
be generated if the first sample after this entry
|
|
becomes valid is less than or equal to this
|
|
threshold and the associated alarmStartupAlarm is
|
|
equal to fallingAlarm(2) or risingOrFallingAlarm(3).
|
|
|
|
After a falling event is generated, another such event
|
|
will not be generated until the sampled value
|
|
rises above this threshold and reaches the
|
|
alarmRisingThreshold.
|
|
|
|
This object may not be modified if the associated
|
|
sleAlarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.13
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.13
|
|
sleAlarmControlRisingEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the eventEntry that is
|
|
used when a rising threshold is crossed. The
|
|
eventEntry identified by a particular value of
|
|
this index is the same as identified by the same value
|
|
of the eventIndex object. If there is no
|
|
corresponding entry in the eventTable, then
|
|
no association exists. In particular, if this value
|
|
is zero, no associated event will be generated, as
|
|
zero is not a valid event index.
|
|
|
|
This object may not be modified if the associated
|
|
sleAlarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.14
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.14
|
|
sleAlarmControlFallingEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the eventEntry that is
|
|
used when a falling threshold is crossed. The
|
|
eventEntry identified by a particular value of
|
|
this index is the same as identified by the same value
|
|
of the eventIndex object. If there is no
|
|
corresponding entry in the eventTable, then
|
|
no association exists. In particular, if this value
|
|
is zero, no associated event will be generated, as
|
|
zero is not a valid event index.
|
|
|
|
This object may not be modified if the associated
|
|
sleAlarmStatus object is equal to valid(1)."
|
|
::= { sleAlarmControl 14 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.15
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.15
|
|
sleAlarmControlOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it."
|
|
::= { sleAlarmControl 15 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.16
|
|
-- 1.3.6.1.4.1.6296.101.9.2.2.16
|
|
sleAlarmControlSts OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this alarm entry."
|
|
::= { sleAlarmControl 16 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3
|
|
sleAlarmNotification OBJECT IDENTIFIER ::= { sleAlarm 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3.1
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3.1
|
|
sleAlarmCreated NOTIFICATION-TYPE
|
|
OBJECTS { sleAlarmInterval, sleAlarmVariable, sleAlarmSampleType, sleAlarmStartupAlarm, sleAlarmRisingThreshold,
|
|
sleAlarmFallingThreshold, sleAlarmRisingEventIndex, sleAlarmFallingEventIndex, sleAlarmOwner, sleAlarmStatus,
|
|
sleAlarmControlRequest, sleAlarmControlTimeStamp, sleAlarmControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleAlarmNotification 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3.2
|
|
sleAlarmDestroyed NOTIFICATION-TYPE
|
|
OBJECTS { sleAlarmIndex, sleAlarmControlRequest, sleAlarmControlTimeStamp, sleAlarmControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleAlarmNotification 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3.3
|
|
-- 1.3.6.1.4.1.6296.101.9.2.3.3
|
|
sleAlarmProfileChanged NOTIFICATION-TYPE
|
|
OBJECTS { sleAlarmControlRequest, sleAlarmControlTimeStamp, sleAlarmControlReqResult, sleAlarmInterval, sleAlarmVariable,
|
|
sleAlarmSampleType, sleAlarmStartupAlarm, sleAlarmRisingThreshold, sleAlarmFallingThreshold, sleAlarmRisingEventIndex,
|
|
sleAlarmFallingEventIndex, sleAlarmOwner, sleAlarmStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleAlarmNotification 3 }
|
|
|
|
|
|
-- The status of a table entry.
|
|
--
|
|
-- Setting this object to the value invalid(4) has the
|
|
-- effect of invalidating the corresponding entry.
|
|
-- That is, it effectively disassociates the mapping
|
|
-- identified with said entry.
|
|
-- It is an implementation-specific matter as to whether
|
|
-- the agent removes an invalidated entry from the table.
|
|
-- Accordingly, management stations must be prepared to
|
|
-- receive tabular information from agents that
|
|
-- corresponds to entries currently not in use. Proper
|
|
-- interpretation of such entries requires examination
|
|
-- of the relevant EntryStatus object.
|
|
--
|
|
-- An existing instance of this object cannot be set to
|
|
-- createRequest(2). This object may only be set to
|
|
-- createRequest(2) when this instance is created. When
|
|
-- this object is created, the agent may wish to create
|
|
-- supplemental object instances with default values
|
|
-- to complete a conceptual row in this table. Because
|
|
-- the creation of these default objects is entirely at
|
|
-- the option of the agent, the manager must not assume
|
|
-- that any will be created, but may make use of any that
|
|
-- are created. Immediately after completing the create
|
|
-- operation, the agent must set this object to
|
|
-- underCreation(3).
|
|
--
|
|
-- When in the underCreation(3) state, an entry is
|
|
-- allowed to exist in a possibly incomplete, possibly
|
|
-- inconsistent state, usually to allow it to be
|
|
-- modified in mutiple PDUs. When in this state, an
|
|
-- entry is not fully active. Entries shall exist in
|
|
-- the underCreation(3) state until the management
|
|
-- station is finisled configuring the entry and sets
|
|
-- this object to valid(1) or aborts, setting this
|
|
-- object to invalid(4). If the agent determines that
|
|
-- an entry has been in the underCreation(3) state for
|
|
-- an abnormally long time, it may decide that the
|
|
-- management station has crasled. If the agent makes
|
|
-- this decision, it may set this object to invalid(4)
|
|
-- to reclaim the entry. A prudent agent will
|
|
-- understand that the management station may need to
|
|
-- wait for human input and will allow for that
|
|
-- possibility in its determination of this abnormally
|
|
-- long period.
|
|
--
|
|
-- An entry in the valid(1) state is fully configured and
|
|
-- consistent and fully represents the configuration or
|
|
-- operation such a row is intended to represent. For
|
|
-- example, it could be a statistical function that is
|
|
-- configured and active, or a filter that is available
|
|
-- in the list of filters processed by the packet capture
|
|
-- process.
|
|
--
|
|
-- A manager is restricted to changing the state of an
|
|
-- entry in the following ways:
|
|
--
|
|
-- create under
|
|
-- To: valid Request Creation invalid
|
|
-- From:
|
|
-- valid OK NO OK OK
|
|
-- createRequest N/A N/A N/A N/A
|
|
-- underCreation OK NO OK OK
|
|
-- invalid NO NO NO OK
|
|
-- nonExistent NO OK NO OK
|
|
--
|
|
-- In the table above, it is not applicable to move the
|
|
-- state from the createRequest state to any other
|
|
-- state because the manager will never find the
|
|
-- variable in that state. The nonExistent state is
|
|
-- not a value of the enumeration, rather it means that
|
|
-- the entryStatus variable does not exist at all.
|
|
--
|
|
-- An agent may allow an entryStatus variable to change
|
|
-- state in additional ways, so long as the semantics
|
|
-- of the states are followed. This allowance is made
|
|
-- to ease the implementation of the agent and is made
|
|
-- despite the fact that managers should never
|
|
-- excercise these additional state transitions.
|
|
-- 1.3.6.1.4.1.6296.101.9.3
|
|
-- 1.3.6.1.4.1.6296.101.9.3
|
|
sleEvent OBJECT IDENTIFIER ::= { sleRmon 3 }
|
|
|
|
|
|
-- The sleEvent Group
|
|
-- Implementation of the Event group is optional.
|
|
--
|
|
-- The Event group controls the generation and notification
|
|
-- of events from this device. Each entry in the eventTable
|
|
-- describes the parameters of the event that can be
|
|
-- triggered. Each event entry is fired by an associated
|
|
-- condition located elsewhere in the MIB. An event entry
|
|
-- may also be associated- with a function elsewhere in the
|
|
-- MIB that will be executed when the event is generated. For
|
|
-- example, a channel may be turned on or off by the firing
|
|
-- of an event.
|
|
--
|
|
-- Each eventEntry may optionally specify that a log entry
|
|
-- be created on its behalf whenever the event occurs.
|
|
-- Each entry may also specify that notification should
|
|
-- occur by way of SNMP trap messages. In this case, the
|
|
-- community for the trap message is given in the associated
|
|
-- eventCommunity object. The enterprise and specific trap
|
|
-- fields of the trap are determined by the condition that
|
|
-- triggered the event. Two traps are defined: risingAlarm
|
|
-- and fallingAlarm. If the eventTable is triggered by a
|
|
-- condition specified elsewhere, the enterprise and
|
|
-- specific trap fields must be specified for traps
|
|
-- generated for that condition.
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1
|
|
sleEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SleEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of events to be generated."
|
|
::= { sleEvent 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1
|
|
sleEventEntry OBJECT-TYPE
|
|
SYNTAX SleEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of parameters that describe an event to be
|
|
generated when certain conditions are met. As an
|
|
example, an instance of the sleEventLastTimeSent object
|
|
might be named sleEventLastTimeSent.6"
|
|
INDEX { sleEventIndex }
|
|
::= { sleEventTable 1 }
|
|
|
|
|
|
SleEventEntry ::=
|
|
SEQUENCE {
|
|
sleEventIndex
|
|
INTEGER,
|
|
sleEventDescription
|
|
DisplayString,
|
|
sleEventType
|
|
INTEGER,
|
|
sleEventCommunity
|
|
OCTET STRING,
|
|
sleEventLastTimeSent
|
|
TimeTicks,
|
|
sleEventOwner
|
|
OwnerString,
|
|
sleEventStatus
|
|
SleEntryStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.1
|
|
sleEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
event table. Each such entry defines one event that
|
|
is to be generated when the appropriate conditions
|
|
occur."
|
|
::= { sleEventEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.2
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.2
|
|
sleEventDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A comment describing this event entry."
|
|
::= { sleEventEntry 2 }
|
|
|
|
|
|
-- send an SNMP trap
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.3
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.3
|
|
sleEventType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
log(2),
|
|
snmpTrap(3),
|
|
logAndTrap(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of notification that the probe will make
|
|
about this event. In the case of log, an entry is
|
|
made in the log table for each event. In the case of
|
|
snmp-trap, an SNMP trap is sent to one or more
|
|
management stations."
|
|
::= { sleEventEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.4
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.4
|
|
sleEventCommunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If an SNMP trap is to be sent, it will be sent to
|
|
the SNMP community specified by this octet string.
|
|
In the future this table will be extended to include
|
|
the party security mechanism. This object shall be
|
|
set to a string of length zero if it is intended that
|
|
that mechanism be used to specify the destination of
|
|
the trap."
|
|
::= { sleEventEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.5
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.5
|
|
sleEventLastTimeSent OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this event
|
|
entry last generated an event. If this entry has
|
|
not generated any events, this value will be
|
|
zero."
|
|
::= { sleEventEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.6
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.6
|
|
sleEventOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it.
|
|
|
|
If this object contains a string starting with
|
|
'monitor' and has associated entries in the log
|
|
table, all connected management stations should
|
|
retrieve those log entries, as they may have
|
|
significance to all management stations connected to
|
|
this device"
|
|
::= { sleEventEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.7
|
|
-- 1.3.6.1.4.1.6296.101.9.3.1.1.7
|
|
sleEventStatus OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this event entry.
|
|
|
|
If this object is not equal to valid(1), all
|
|
associated log entries shall be deleted by the
|
|
agent."
|
|
::= { sleEventEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2
|
|
sleEventControl OBJECT IDENTIFIER ::= { sleEvent 2 }
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.1
|
|
sleEventControlRequest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createEvent(1),
|
|
destroyEvent(2),
|
|
setEventProfile(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
createEvent:
|
|
(sleEventControlIndex)
|
|
sleEventControlDescription
|
|
sleEventControlType
|
|
sleEventControlCommunity
|
|
sleEventControlOwner
|
|
sleEventControlSts
|
|
|
|
destroyEvent:
|
|
sleEventControlIndex
|
|
|
|
setEventProfile:
|
|
sleEventControlIndex
|
|
sleEventControlDescription
|
|
sleEventControlType
|
|
sleEventControlCommunity
|
|
sleEventControlOwner
|
|
sleEventControlSts
|
|
|
|
"
|
|
::= { sleEventControl 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.2
|
|
sleEventControlStatus OBJECT-TYPE
|
|
SYNTAX SleControlStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a user command.
|
|
"
|
|
::= { sleEventControl 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.3
|
|
sleEventControlTimer OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum wait time for the manager for a long running user command.
|
|
"
|
|
::= { sleEventControl 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.4
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.4
|
|
sleEventControlTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time stamp of the last command (end of command)."
|
|
::= { sleEventControl 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.5
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.5
|
|
sleEventControlReqResult OBJECT-TYPE
|
|
SYNTAX SleControlRequestResultType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last user command."
|
|
::= { sleEventControl 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.6
|
|
sleEventControlIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEventControl 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.7
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.7
|
|
sleEventControlDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A comment describing this event entry."
|
|
::= { sleEventControl 7 }
|
|
|
|
|
|
-- send an SNMP trap
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.8
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.8
|
|
sleEventControlType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
log(2),
|
|
snmpTrap(3),
|
|
logAndTrap(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of notification that the probe will make
|
|
about this event. In the case of log, an entry is
|
|
made in the log table for each event. In the case of
|
|
snmp-trap, an SNMP trap is sent to one or more
|
|
management stations."
|
|
::= { sleEventControl 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.9
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.9
|
|
sleEventControlCommunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If an SNMP trap is to be sent, it will be sent to
|
|
the SNMP community specified by this octet string.
|
|
In the future this table will be extended to include
|
|
the party security mechanism. This object shall be
|
|
set to a string of length zero if it is intended that
|
|
that mechanism be used to specify the destination of
|
|
the trap."
|
|
::= { sleEventControl 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.10
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.10
|
|
sleEventControlOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it.
|
|
|
|
If this object contains a string starting with
|
|
'monitor' and has associated entries in the log
|
|
table, all connected management stations should
|
|
retrieve those log entries, as they may have
|
|
significance to all management stations connected to
|
|
this device"
|
|
::= { sleEventControl 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.11
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.11
|
|
sleEventControlSts OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this event entry.
|
|
|
|
If this object is not equal to valid(1), all
|
|
associated log entries shall be deleted by the
|
|
agent."
|
|
::= { sleEventControl 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3
|
|
sleEventNotification OBJECT IDENTIFIER ::= { sleEvent 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3.1
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3.1
|
|
sleEventCreated NOTIFICATION-TYPE
|
|
OBJECTS { sleEventDescription, sleEventType, sleEventCommunity, sleEventOwner, sleEventStatus,
|
|
sleEventControlRequest, sleEventControlTimeStamp, sleEventControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEventNotification 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3.2
|
|
sleEventDestroyed NOTIFICATION-TYPE
|
|
OBJECTS { sleEventIndex, sleEventControlRequest, sleEventControlTimeStamp, sleEventControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEventNotification 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3.3
|
|
-- 1.3.6.1.4.1.6296.101.9.3.3.3
|
|
sleEventProfileChanged NOTIFICATION-TYPE
|
|
OBJECTS { sleEventDescription, sleEventType, sleEventCommunity, sleEventOwner, sleEventStatus,
|
|
sleEventControlRequest, sleEventControlTimeStamp, sleEventControlReqResult }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEventNotification 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4
|
|
-- 1.3.6.1.4.1.6296.101.9.4
|
|
sleStatistics OBJECT IDENTIFIER ::= { sleRmon 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1
|
|
sleEtherStats OBJECT IDENTIFIER ::= { sleStatistics 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1
|
|
sleEtherStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SleEtherStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEtherStats 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1
|
|
sleEtherStatsEntry OBJECT-TYPE
|
|
SYNTAX SleEtherStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
INDEX { sleEtherStatsIndex }
|
|
::= { sleEtherStatsTable 1 }
|
|
|
|
|
|
SleEtherStatsEntry ::=
|
|
SEQUENCE {
|
|
sleEtherStatsIndex
|
|
INTEGER,
|
|
sleEtherStatsDataSource
|
|
OBJECT IDENTIFIER,
|
|
sleEtherStatsDropEvents
|
|
Counter32,
|
|
sleEtherStatsOctets
|
|
Counter32,
|
|
sleEtherStatsPkts
|
|
Counter32,
|
|
sleEtherStatsBroadcastPkts
|
|
Counter32,
|
|
sleEtherStatsMulticastPkts
|
|
Counter32,
|
|
sleEtherStatsCRCAlignErrors
|
|
Counter32,
|
|
sleEtherStatsUndersizePkts
|
|
Counter32,
|
|
sleEtherStatsOversizePkts
|
|
Counter32,
|
|
sleEtherStatsFragments
|
|
Counter32,
|
|
sleEtherStatsJabbers
|
|
Counter32,
|
|
sleEtherStatsCollisions
|
|
Counter32,
|
|
sleEtherStatsPkts64Octets
|
|
Counter32,
|
|
sleEtherStatsPkts65to127Octets
|
|
Counter32,
|
|
sleEtherStatsPkts128to255Octets
|
|
Counter32,
|
|
sleEtherStatsPkts256to511Octets
|
|
Counter32,
|
|
sleEtherStatsPkts512to1023Octets
|
|
Counter32,
|
|
sleEtherStatsPkts1024to1518Octets
|
|
Counter32,
|
|
sleEtherStatsOwner
|
|
OCTET STRING,
|
|
sleEtherStatsStatus
|
|
SleEntryStatus,
|
|
sleEtherStatsClearedTime
|
|
TimeTicks
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.1
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.1
|
|
sleEtherStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies this sleEtherStats entry"
|
|
::= { sleEtherStatsEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.2
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.2
|
|
sleEtherStatsDataSource OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the source of the data that
|
|
this sleEtherStats entry is configured to analyze. This
|
|
source can be any ethernet interface on this device.
|
|
In order to identify a particular interface, this
|
|
object shall identify the instance of the ifIndex
|
|
object, defined in RFC 1213 and RFC 1573 [4,6], for
|
|
the desired interface. For example, if an entry
|
|
were to receive data from interface #1, this object
|
|
would be set to ifIndex.1.
|
|
|
|
The statistics in this group reflect all packets
|
|
on the local network segment attached to the
|
|
identified interface.
|
|
|
|
An agent may or may not be able to tell if
|
|
fundamental changes to the media of the interface
|
|
have occurred and necessitate an invalidation of
|
|
this entry. For example, a hot-pluggable ethernet
|
|
card could be pulled out and replaced by a
|
|
token-ring card. In such a case, if the agent has
|
|
such knowledge of the change, it is recommended that
|
|
it invalidate this entry.
|
|
|
|
This object may not be modified if the associated
|
|
sleEtherStatsStatus object is equal to valid(1)."
|
|
::= { sleEtherStatsEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.3
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.3
|
|
sleEtherStatsDropEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of events in which packets
|
|
were dropped by the probe due to lack of resources.
|
|
Note that this number is not necessarily the number of
|
|
packets dropped; it is just the number of times this
|
|
condition has been detected."
|
|
::= { sleEtherStatsEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.4
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.4
|
|
sleEtherStatsOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets of data (including
|
|
those in bad packets) received on the
|
|
network (excluding framing bits but including
|
|
FCS octets).
|
|
|
|
This object can be used as a reasonable estimate of
|
|
ethernet utilization. If greater precision is
|
|
desired, the etherStatsPkts and etherStatsOctets
|
|
objects should be sampled before and after a common
|
|
interval. The differences in the sampled values are
|
|
Pkts and Octets, respectively, and the number of
|
|
seconds in the interval is Interval. These values
|
|
are used to calculate the Utilization as follows:
|
|
|
|
Pkts * (9.6 + 6.4) + (Octets * .8)
|
|
Utilization = -------------------------------------
|
|
Interval * 10,000
|
|
|
|
The result of this equation is the value Utilization
|
|
which is the percent utilization of the ethernet
|
|
segment on a scale of 0 to 100 percent.
|
|
"
|
|
::= { sleEtherStatsEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.5
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.5
|
|
sleEtherStatsPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad packets,
|
|
broadcast packets, and multicast packets) received."
|
|
::= { sleEtherStatsEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.6
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.6
|
|
sleEtherStatsBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good packets received that were
|
|
directed to the broadcast address. Note that this
|
|
does not include multicast packets."
|
|
::= { sleEtherStatsEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.7
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.7
|
|
sleEtherStatsMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good packets received that were
|
|
directed to a multicast address. Note that this
|
|
number does not include packets directed to the
|
|
broadcast address.
|
|
"
|
|
::= { sleEtherStatsEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.8
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.8
|
|
sleEtherStatsCRCAlignErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that
|
|
had a length (excluding framing bits, but
|
|
including FCS octets) of between 64 and 1518
|
|
octets, inclusive, but but had either a bad
|
|
Frame Check Sequence (FCS) with an integral
|
|
number of octets (FCS Error) or a bad FCS with
|
|
a non-integral number of octets (Alignment Error).
|
|
"
|
|
::= { sleEtherStatsEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.9
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.9
|
|
sleEtherStatsUndersizePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were
|
|
less than 64 octets long (excluding framing bits,
|
|
but including FCS octets) and were otherwise well
|
|
formed.
|
|
"
|
|
::= { sleEtherStatsEntry 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.10
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.10
|
|
sleEtherStatsOversizePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were
|
|
longer than 1518 octets (excluding framing bits,
|
|
but including FCS octets) and were otherwise
|
|
well formed.
|
|
"
|
|
::= { sleEtherStatsEntry 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.11
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.11
|
|
sleEtherStatsFragments OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were less
|
|
than 64 octets in length (excluding framing bits but
|
|
including FCS octets) and had either a bad Frame
|
|
Check Sequence (FCS) with an integral number of
|
|
octets (FCS Error) or a bad FCS with a non-integral
|
|
number of octets (Alignment Error).
|
|
"
|
|
::= { sleEtherStatsEntry 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.12
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.12
|
|
sleEtherStatsJabbers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were
|
|
longer than 1518 octets (excluding framing bits,
|
|
but including FCS octets), and had either a bad
|
|
Frame Check Sequence (FCS) with an integral number
|
|
of octets (FCS Error) or a bad FCS with a
|
|
non-integral number of octets (Alignment Error).
|
|
"
|
|
::= { sleEtherStatsEntry 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.13
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.13
|
|
sleEtherStatsCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The best estimate of the total number of collisions
|
|
on this Ethernet segment.
|
|
|
|
The value returned will depend on the location of
|
|
the RMON probe. Section 8.2.1.3 (10BASE-5) and
|
|
section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
|
|
states that a station must detect a collision, in
|
|
the receive mode, if three or more stations are
|
|
transmitting simultaneously. A repeater port must
|
|
detect a collision when two or more stations are
|
|
transmitting simultaneously. Thus a probe placed on
|
|
a repeater port could record more collisions than a
|
|
probe connected to a station on the same segment
|
|
would.
|
|
|
|
Probe location plays a much smaller role when
|
|
considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
|
|
standard 802.3 defines a collision as the
|
|
simultaneous presence of signals on the DO and RD
|
|
circuits (transmitting and receiving at the same
|
|
time). A 10BASE-T station can only detect
|
|
collisions when it is transmitting. Thus probes
|
|
placed on a station and a repeater, should report
|
|
the same number of collisions.
|
|
|
|
Note also that an RMON probe inside a repeater
|
|
should ideally report collisions between the
|
|
repeater and one or more other hosts (transmit
|
|
collisions as defined by IEEE 802.3k) plus receiver
|
|
collisions observed on any coax segments to which
|
|
the repeater is connected.
|
|
"
|
|
::= { sleEtherStatsEntry 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.14
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.14
|
|
sleEtherStatsPkts64Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were 64 octets in length
|
|
(excluding framing bits but including FCS octets).
|
|
"
|
|
::= { sleEtherStatsEntry 14 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.15
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.15
|
|
sleEtherStatsPkts65to127Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
65 and 127 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { sleEtherStatsEntry 15 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.16
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.16
|
|
sleEtherStatsPkts128to255Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
128 and 255 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { sleEtherStatsEntry 16 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.17
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.17
|
|
sleEtherStatsPkts256to511Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
256 and 511 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { sleEtherStatsEntry 17 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.18
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.18
|
|
sleEtherStatsPkts512to1023Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
512 and 1023 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { sleEtherStatsEntry 18 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.19
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.19
|
|
sleEtherStatsPkts1024to1518Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
1024 and 1518 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { sleEtherStatsEntry 19 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.20
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.20
|
|
sleEtherStatsOwner OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is
|
|
therefore using the resources assigned to it.
|
|
"
|
|
::= { sleEtherStatsEntry 20 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.21
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.21
|
|
sleEtherStatsStatus OBJECT-TYPE
|
|
SYNTAX SleEntryStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this etherStats entry.
|
|
"
|
|
::= { sleEtherStatsEntry 21 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.22
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.1.1.22
|
|
sleEtherStatsClearedTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEtherStatsEntry 22 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2
|
|
sleEtherStatsControl OBJECT IDENTIFIER ::= { sleEtherStats 2 }
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2.1
|
|
sleEtherStatsControlRequest OBJECT-TYPE
|
|
SYNTAX INTEGER { clearRmonStat(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
createEvent:
|
|
(sleEventControlIndex)
|
|
sleEventControlDescription
|
|
sleEventControlType
|
|
sleEventControlCommunity
|
|
sleEventControlOwner
|
|
sleEventControlSts
|
|
|
|
destroyEvent:
|
|
sleEventControlIndex
|
|
|
|
setEventProfile:
|
|
sleEventControlIndex
|
|
sleEventControlDescription
|
|
sleEventControlType
|
|
sleEventControlCommunity
|
|
sleEventControlOwner
|
|
sleEventControlSts
|
|
|
|
"
|
|
::= { sleEtherStatsControl 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2.2
|
|
sleEtherStatsControlStatus OBJECT-TYPE
|
|
SYNTAX SleControlStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a user command.
|
|
"
|
|
::= { sleEtherStatsControl 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2.3
|
|
sleEtherStatsControlTimer OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum wait time for the manager for a long running user command.
|
|
"
|
|
::= { sleEtherStatsControl 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.4
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2.4
|
|
sleEtherStatsControlTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time stamp of the last command (end of command)."
|
|
::= { sleEtherStatsControl 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.5
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2.5
|
|
sleEtherStatsControlReqResult OBJECT-TYPE
|
|
SYNTAX SleControlRequestResultType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last user command."
|
|
::= { sleEtherStatsControl 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.4.1.2.6
|
|
sleEtherStatsControlIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleEtherStatsControl 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5
|
|
sleRmonSimple OBJECT IDENTIFIER ::= { sleRmon 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1
|
|
sleRmonSimpleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SleRmonSimpleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleRmonSimple 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1.1
|
|
sleRmonSimpleEntry OBJECT-TYPE
|
|
SYNTAX SleRmonSimpleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
INDEX { sleRmonSimplePortIndex, sleRmonSimpleSampleVariable }
|
|
::= { sleRmonSimpleTable 1 }
|
|
|
|
|
|
SleRmonSimpleEntry ::=
|
|
SEQUENCE {
|
|
sleRmonSimplePortIndex
|
|
Integer32,
|
|
sleRmonSimpleSampleVariable
|
|
INTEGER,
|
|
sleRmonSimpleSampleInterval
|
|
Integer32,
|
|
sleRmonSimpleRisingThreshold
|
|
Integer32,
|
|
sleRmonSimpleFallingThreshold
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1.1.1
|
|
sleRmonSimplePortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { sleRmonSimpleEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1.1.2
|
|
sleRmonSimpleSampleVariable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
crcAlignError(1),
|
|
jabber(2),
|
|
oversizePackets(3),
|
|
undersizePackets(4),
|
|
fragments(5),
|
|
dropEvents(6),
|
|
collisions(7),
|
|
ifInDiscards(8),
|
|
ifInErrors(9),
|
|
ifOutDiscards(10),
|
|
ifOutErrors(11),
|
|
ifInPauseFrame(12),
|
|
ifOutPauseFrame(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample variable type."
|
|
::= { sleRmonSimpleEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1.1.3
|
|
sleRmonSimpleSampleInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample interval. (10: minimum)"
|
|
::= { sleRmonSimpleEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1.1.4
|
|
sleRmonSimpleRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rising threshold."
|
|
::= { sleRmonSimpleEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.1.1.5
|
|
sleRmonSimpleFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The falling threshold."
|
|
::= { sleRmonSimpleEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2
|
|
sleRmonSimpleControl OBJECT IDENTIFIER ::= { sleRmonSimple 2 }
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.1
|
|
sleRmonSimpleControlRequest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createRmonSimple(1),
|
|
delRmonSimple(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description"
|
|
::= { sleRmonSimpleControl 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.2
|
|
sleRmonSimpleControlStatus OBJECT-TYPE
|
|
SYNTAX SleControlStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a user command.
|
|
"
|
|
::= { sleRmonSimpleControl 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.3
|
|
sleRmonSimpleControlTimer OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum wait time for the manager for a long running user command.
|
|
"
|
|
::= { sleRmonSimpleControl 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.4
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.4
|
|
sleRmonSimpleControlTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time stamp of the last command (end of command)."
|
|
::= { sleRmonSimpleControl 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.5
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.5
|
|
sleRmonSimpleControlReqResult OBJECT-TYPE
|
|
SYNTAX SleControlRequestResultType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last user command."
|
|
::= { sleRmonSimpleControl 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.6
|
|
sleRmonSimpleControlPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { sleRmonSimpleControl 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.7
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.7
|
|
sleRmonSimpleControlSampleVariable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
crcAlignError(1),
|
|
jabber(2),
|
|
oversizePackets(3),
|
|
undersizePackets(4),
|
|
fragments(5),
|
|
dropEvents(6),
|
|
collisions(7),
|
|
ifInDiscards(8),
|
|
ifInErrors(9),
|
|
ifOutDiscards(10),
|
|
ifOutErrors(11),
|
|
ifInPauseFrame(12),
|
|
ifOutPauseFrame(13),
|
|
allTypes(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample variable type. (255: set all sample variable types)"
|
|
::= { sleRmonSimpleControl 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.8
|
|
sleRmonSimpleControlSampleInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (10..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample interval.(10: minimum)"
|
|
::= { sleRmonSimpleControl 8 }
|
|
|
|
|
|
-- send an SNMP trap
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.8
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.9
|
|
sleRmonSimpleControlRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rising threshold."
|
|
::= { sleRmonSimpleControl 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.9
|
|
-- 1.3.6.1.4.1.6296.101.9.5.2.10
|
|
sleRmonSimpleControlFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The falling threshold."
|
|
::= { sleRmonSimpleControl 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.3
|
|
sleRmonSimpleNotification OBJECT IDENTIFIER ::= { sleRmonSimple 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.3.1
|
|
sleRmonSimpleCreated NOTIFICATION-TYPE
|
|
OBJECTS { sleRmonSimpleControlRequest, sleRmonSimpleControlTimeStamp, sleRmonSimpleControlReqResult, sleRmonSimpleControlPortIndex, sleRmonSimpleControlSampleVariable,
|
|
sleRmonSimpleControlSampleInterval, sleRmonSimpleControlRisingThreshold, sleRmonSimpleControlFallingThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"createRmonSimple"
|
|
::= { sleRmonSimpleNotification 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5.3.2
|
|
sleRmonSimpleDeleted NOTIFICATION-TYPE
|
|
OBJECTS { sleRmonSimpleControlRequest, sleRmonSimpleControlTimeStamp, sleRmonSimpleControlReqResult, sleRmonSimpleControlPortIndex, sleRmonSimpleControlSampleVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"delRmonSimple"
|
|
::= { sleRmonSimpleNotification 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6
|
|
sleRmonSimpleQueue OBJECT IDENTIFIER ::= { sleRmon 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1
|
|
sleRmonSimpleQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SleRmonSimpleQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleRmonSimpleQueue 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1
|
|
sleRmonSimpleQueueEntry OBJECT-TYPE
|
|
SYNTAX SleRmonSimpleQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
INDEX { sleRmonSimpleQueuePortIndex, sleRmonSimpleQueueSampleVariable, sleRmonSimpleQueueQueueNumber }
|
|
::= { sleRmonSimpleQueueTable 1 }
|
|
|
|
|
|
SleRmonSimpleQueueEntry ::=
|
|
SEQUENCE {
|
|
sleRmonSimpleQueuePortIndex
|
|
Integer32,
|
|
sleRmonSimpleQueueSampleVariable
|
|
INTEGER,
|
|
sleRmonSimpleQueueQueueNumber
|
|
Integer32,
|
|
sleRmonSimpleQueueSampleInterval
|
|
Integer32,
|
|
sleRmonSimpleQueueRisingThreshold
|
|
Integer32,
|
|
sleRmonSimpleQueueFallingThreshold
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1.1
|
|
sleRmonSimpleQueuePortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { sleRmonSimpleQueueEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1.2
|
|
sleRmonSimpleQueueSampleVariable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmitCount(1),
|
|
dropCount(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample variable type."
|
|
::= { sleRmonSimpleQueueEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1.3
|
|
sleRmonSimpleQueueQueueNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue number 0~7"
|
|
::= { sleRmonSimpleQueueEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1.4
|
|
sleRmonSimpleQueueSampleInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample interval. (10: minimum)"
|
|
::= { sleRmonSimpleQueueEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1.5
|
|
sleRmonSimpleQueueRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rising threshold."
|
|
::= { sleRmonSimpleQueueEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.1.1.6
|
|
sleRmonSimpleQueueFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The falling threshold."
|
|
::= { sleRmonSimpleQueueEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2
|
|
sleRmonSimpleQueueControl OBJECT IDENTIFIER ::= { sleRmonSimpleQueue 2 }
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.1
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.1
|
|
sleRmonSimpleQueueControlRequest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createRmonSimpleQueue(1),
|
|
delRmonSimpleQueue(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description"
|
|
::= { sleRmonSimpleQueueControl 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.2
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.2
|
|
sleRmonSimpleQueueControlStatus OBJECT-TYPE
|
|
SYNTAX SleControlStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a user command.
|
|
"
|
|
::= { sleRmonSimpleQueueControl 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.3
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.3
|
|
sleRmonSimpleQueueControlTimer OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum wait time for the manager for a long running user command.
|
|
"
|
|
::= { sleRmonSimpleQueueControl 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.4
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.4
|
|
sleRmonSimpleQueueControlTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time stamp of the last command (end of command)."
|
|
::= { sleRmonSimpleQueueControl 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.5
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.5
|
|
sleRmonSimpleQueueControlReqResult OBJECT-TYPE
|
|
SYNTAX SleControlRequestResultType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last user command."
|
|
::= { sleRmonSimpleQueueControl 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.6
|
|
sleRmonSimpleQueueControlPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { sleRmonSimpleQueueControl 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.7
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.7
|
|
sleRmonSimpleQueueControlSampleVariable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmitCount(1),
|
|
dropCount(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample variable type."
|
|
::= { sleRmonSimpleQueueControl 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.6
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.8
|
|
sleRmonSimpleQueueControlQueueNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue number 0~7"
|
|
::= { sleRmonSimpleQueueControl 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.9
|
|
sleRmonSimpleQueueControlSampleInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (10..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sample interval. (10: minimum)"
|
|
::= { sleRmonSimpleQueueControl 9 }
|
|
|
|
|
|
-- send an SNMP trap
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.8
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.10
|
|
sleRmonSimpleQueueControlRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rising threshold."
|
|
::= { sleRmonSimpleQueueControl 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.3.2.9
|
|
-- 1.3.6.1.4.1.6296.101.9.6.2.11
|
|
sleRmonSimpleQueueControlFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The falling threshold."
|
|
::= { sleRmonSimpleQueueControl 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.3
|
|
sleRmonSimpleQueueNotification OBJECT IDENTIFIER ::= { sleRmonSimpleQueue 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.3.1
|
|
sleRmonSimpleQueueCreated NOTIFICATION-TYPE
|
|
OBJECTS { sleRmonSimpleQueueControlRequest, sleRmonSimpleQueueControlTimeStamp, sleRmonSimpleQueueControlReqResult, sleRmonSimpleQueueControlPortIndex, sleRmonSimpleQueueControlSampleVariable,
|
|
sleRmonSimpleQueueControlQueueNumber, sleRmonSimpleQueueControlSampleInterval, sleRmonSimpleQueueControlRisingThreshold, sleRmonSimpleQueueControlFallingThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"createRmonSimpleQueue"
|
|
::= { sleRmonSimpleQueueNotification 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6.3.2
|
|
sleRmonSimpleQueueDeleted NOTIFICATION-TYPE
|
|
OBJECTS { sleRmonSimpleQueueControlRequest, sleRmonSimpleQueueControlTimeStamp, sleRmonSimpleQueueControlReqResult, sleRmonSimpleQueueControlPortIndex, sleRmonSimpleQueueControlSampleVariable,
|
|
sleRmonSimpleQueueControlQueueNumber }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"createRmonSimpleQueue"
|
|
::= { sleRmonSimpleQueueNotification 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.5
|
|
-- 1.3.6.1.4.1.6296.101.9.7
|
|
sleRmonGroup OBJECT-GROUP
|
|
OBJECTS { sleHistoryIndex, sleHistoryDataSource, sleHistoryBucketsRequested, sleHistoryBucketsGranted, sleHistoryInterval,
|
|
sleHistoryOwner, sleHistoryStatus, sleHistoryControlRequest, sleHistoryControlStatus, sleHistoryControlTimer,
|
|
sleHistoryControlTimeStamp, sleHistoryControlReqResult, sleHistoryControlIndex, sleHistoryControlDataSource, sleHistoryControlBucketsRequested,
|
|
sleHistoryControlInterval, sleHistoryControlOwner, sleHistoryControlSts, sleAlarmIndex, sleAlarmInterval,
|
|
sleAlarmVariable, sleAlarmSampleType, sleAlarmValue, sleAlarmStartupAlarm, sleAlarmRisingThreshold,
|
|
sleAlarmFallingThreshold, sleAlarmRisingEventIndex, sleAlarmFallingEventIndex, sleAlarmOwner, sleAlarmStatus,
|
|
sleAlarmControlRequest, sleAlarmControlStatus, sleAlarmControlTimer, sleAlarmControlTimeStamp, sleAlarmControlReqResult,
|
|
sleAlarmControlIndex, sleAlarmControlInterval, sleAlarmControlVariable, sleAlarmControlSampleType, sleAlarmControlStartupAlarm,
|
|
sleAlarmControlRisingThreshold, sleAlarmControlFallingThreshold, sleAlarmControlRisingEventIndex, sleAlarmControlFallingEventIndex, sleAlarmControlOwner,
|
|
sleAlarmControlSts, sleEventIndex, sleEventDescription, sleEventType, sleEventCommunity,
|
|
sleEventLastTimeSent, sleEventOwner, sleEventStatus, sleEventControlRequest, sleEventControlStatus,
|
|
sleEventControlTimer, sleEventControlTimeStamp, sleEventControlReqResult, sleEventControlIndex, sleEventControlDescription,
|
|
sleEventControlType, sleEventControlCommunity, sleEventControlOwner, sleEventControlSts, sleEtherStatsIndex,
|
|
sleEtherStatsDataSource, sleEtherStatsDropEvents, sleEtherStatsOctets, sleEtherStatsPkts, sleEtherStatsBroadcastPkts,
|
|
sleEtherStatsMulticastPkts, sleEtherStatsCRCAlignErrors, sleEtherStatsUndersizePkts, sleEtherStatsOversizePkts, sleEtherStatsFragments,
|
|
sleEtherStatsJabbers, sleEtherStatsCollisions, sleEtherStatsPkts64Octets, sleEtherStatsPkts65to127Octets, sleEtherStatsPkts128to255Octets,
|
|
sleEtherStatsPkts256to511Octets, sleEtherStatsPkts512to1023Octets, sleEtherStatsPkts1024to1518Octets, sleEtherStatsOwner, sleEtherStatsStatus,
|
|
sleEtherStatsClearedTime, sleRmonSimplePortIndex, sleRmonSimpleSampleVariable, sleRmonSimpleSampleInterval, sleRmonSimpleRisingThreshold,
|
|
sleRmonSimpleFallingThreshold, sleRmonSimpleControlRequest, sleRmonSimpleControlStatus, sleRmonSimpleControlTimer, sleRmonSimpleControlTimeStamp,
|
|
sleRmonSimpleControlReqResult, sleRmonSimpleControlPortIndex, sleRmonSimpleControlSampleVariable, sleRmonSimpleControlRisingThreshold, sleRmonSimpleControlFallingThreshold,
|
|
sleRmonSimpleControlSampleInterval, sleRmonSimpleQueuePortIndex, sleRmonSimpleQueueQueueNumber, sleRmonSimpleQueueSampleVariable, sleRmonSimpleQueueSampleInterval,
|
|
sleRmonSimpleQueueRisingThreshold, sleRmonSimpleQueueFallingThreshold, sleRmonSimpleQueueControlRequest, sleRmonSimpleQueueControlStatus, sleRmonSimpleQueueControlTimer,
|
|
sleRmonSimpleQueueControlTimeStamp, sleRmonSimpleQueueControlReqResult, sleRmonSimpleQueueControlPortIndex, sleEtherStatsControlRequest, sleEtherStatsControlStatus,
|
|
sleEtherStatsControlTimer, sleEtherStatsControlTimeStamp, sleEtherStatsControlReqResult, sleEtherStatsControlIfIndex, sleRmonSimpleQueueControlQueueNumber,
|
|
sleRmonSimpleQueueControlSampleVariable, sleRmonSimpleQueueControlSampleInterval, sleRmonSimpleQueueControlRisingThreshold, sleRmonSimpleQueueControlFallingThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleRmon 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.6296.101.9.6
|
|
-- 1.3.6.1.4.1.6296.101.9.8
|
|
sleRmonNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { sleHistoryCreated, sleHistoryDestroyed, sleHistoryProfileChanged, sleAlarmCreated, sleAlarmDestroyed,
|
|
sleAlarmProfileChanged, sleEventCreated, sleEventDestroyed, sleEventProfileChanged, sleRmonSimpleQueueCreated,
|
|
sleRmonSimpleQueueDeleted, sleRmonSimpleDeleted, sleRmonSimpleCreated }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { sleRmon 8 }
|
|
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- sle-rmon-mib.mib
|
|
--
|