1451 lines
48 KiB
Plaintext
1451 lines
48 KiB
Plaintext
F10-S-SERIES-CHASSIS-MIB DEFINITIONS ::= BEGIN
|
|
-- Force10 Networks, Inc.
|
|
-- 390 Holger Way
|
|
-- San Jose, CA 95134
|
|
|
|
-- This module provides authoritative definitions for S-series
|
|
-- Force10 enterprise Chassis MIB.
|
|
--
|
|
-- This module will be extended, as needed.
|
|
--
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Gauge32, Counter32, Integer32, Unsigned32,
|
|
TimeTicks, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DateAndTime, DisplayString,
|
|
MacAddress, RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
f10Mgmt
|
|
FROM FORCE10-SMI
|
|
chAlarmVarInteger, chAlarmVarString,
|
|
chAlarmVarSlot, chAlarmVarPort
|
|
FROM F10-CHASSIS-MIB
|
|
F10SwDate, F10ChassisType, F10ProcessorModuleType,
|
|
F10MfgDate, F10HundredthdB, F10SSeriesPortType
|
|
FROM FORCE10-TC;
|
|
|
|
f10SSerChassisMib MODULE-IDENTITY
|
|
LAST-UPDATED "200710031200Z" -- Oct 3, 2007 12:00:00 GMT
|
|
ORGANIZATION
|
|
"Force10 Networks, Inc."
|
|
CONTACT-INFO
|
|
"Force10 Networks, Inc.
|
|
350 Holger Way
|
|
San Jose, CA 95134 USA
|
|
Phone: +1 (408) 571 3500
|
|
Fax: +1 (408) 571 3550
|
|
Email: support@force10networks.com"
|
|
|
|
DESCRIPTION
|
|
"Force10 S-Series Enterprise Chassis MIB. "
|
|
|
|
REVISION "200710031200Z"
|
|
DESCRIPTION
|
|
"Initial version of this mib."
|
|
::= { f10Mgmt 10 }
|
|
|
|
|
|
-- ### Groups ###
|
|
|
|
f10SSerChassisObject OBJECT IDENTIFIER ::={ f10SSerChassisMib 1 }
|
|
chObjects OBJECT IDENTIFIER ::={ f10SSerChassisObject 1 }
|
|
chSysObjects OBJECT IDENTIFIER ::={ f10SSerChassisObject 2 }
|
|
chAlarmObjects OBJECT IDENTIFIER ::={ f10SSerChassisObject 4 }
|
|
|
|
-- ### Textual Convention
|
|
|
|
CodeType ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "x"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The code type value for a given unit,
|
|
displayed in hexadecimal."
|
|
SYNTAX Unsigned32
|
|
|
|
UnitType ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "x"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit type value for a given unit,
|
|
displayed in hexadecimal."
|
|
SYNTAX Unsigned32
|
|
|
|
-- ### Chassis Information
|
|
|
|
chNumStackUnits OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of stack units configured
|
|
on the chassis."
|
|
::= { chObjects 1 }
|
|
|
|
chNumMaxStackableUnits OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum allowed Unit Number
|
|
configurable on the chassis."
|
|
::= { chObjects 2 }
|
|
|
|
chStackUnitIndexNext OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the next appropriate value to
|
|
be used for chStackUnitIndex when creating
|
|
entries in the chStackUnitTable. The value 0
|
|
indicates that no unassigned entries are available.
|
|
To obtain the chStackUnitIndexNext value for a new entry,
|
|
the manager must first issue a management protocol
|
|
retrieval operation to obtain the current value of
|
|
this object. The agent should modify the value to
|
|
reflect the next unassigned number after each
|
|
retrieval operation. After a manager retrieves a value
|
|
the agent will determine when this index value will be
|
|
made available for reuse.
|
|
|
|
Note that this object is not the unit number assigned by
|
|
the management unit."
|
|
::= { chObjects 3 }
|
|
|
|
-- ### Chassis System ###
|
|
|
|
-- ## SwitchType Table
|
|
|
|
-- The S-series chassis has a list of supported switch
|
|
-- types to configure a unit.
|
|
|
|
-- The switchType table contains the information of
|
|
-- supported switch types.
|
|
|
|
chSwitchTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSwitchTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of supported switch types.
|
|
"
|
|
::= { chSysObjects 1 }
|
|
|
|
chSwitchTypeEntry OBJECT-TYPE
|
|
SYNTAX ChSwitchTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of supported switch types entries."
|
|
INDEX { chSwitchTypeSID }
|
|
::= { chSwitchTypeTable 1 }
|
|
|
|
ChSwitchTypeEntry ::=
|
|
SEQUENCE {
|
|
chSwitchTypeSID Integer32,
|
|
chSwitchTypeModelID DisplayString,
|
|
chSwitchTypeCodeType CodeType,
|
|
chSwitchTypeMgmtPreference Integer32
|
|
}
|
|
|
|
chSwitchTypeSID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The unique switch type index (SID)."
|
|
::= { chSwitchTypeEntry 1 }
|
|
|
|
chSwitchTypeModelID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The pre-configured model ID for this swich type."
|
|
::= { chSwitchTypeEntry 2 }
|
|
|
|
chSwitchTypeCodeType OBJECT-TYPE
|
|
SYNTAX CodeType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The code type of this switch type."
|
|
::= { chSwitchTypeEntry 3 }
|
|
|
|
chSwitchTypeMgmtPreference OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"indicates the default prefernce value for
|
|
the management unit. A value of 0 indicates a disabled
|
|
or unassigned preference."
|
|
::= { chSwitchTypeEntry 4 }
|
|
|
|
|
|
-- ## StackUnit Table
|
|
|
|
-- The S-series chassis is a single virtual system to
|
|
-- have the stackable units as virtual slots.
|
|
-- In the chassis, there can be multiple physical units
|
|
-- stacked together.
|
|
|
|
-- The StackUnit table contains the management information
|
|
-- of each stacked unit in the chassis.
|
|
|
|
chStackUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChStackUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of stack units configured in the chassis.
|
|
The StackUnit table contains the management
|
|
information of each stacked unit in the chassis.
|
|
"
|
|
::= { chSysObjects 2 }
|
|
|
|
chStackUnitEntry OBJECT-TYPE
|
|
SYNTAX ChStackUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of units entries containing information
|
|
for each stacked unit."
|
|
INDEX { chStackUnitIndex }
|
|
::= { chStackUnitTable 1 }
|
|
|
|
ChStackUnitEntry ::=
|
|
SEQUENCE {
|
|
chStackUnitIndex Integer32,
|
|
chStackUnitNumber Integer32,
|
|
chStackUnitSID Integer32,
|
|
chStackUnitMgmtStatus INTEGER,
|
|
chStackUnitHwMgmtPreference INTEGER,
|
|
chStackUnitAdmMgmtPreference Integer32,
|
|
chStackUnitModelID DisplayString,
|
|
chStackUnitStatus INTEGER,
|
|
chStackUnitDescription DisplayString,
|
|
chStackUnitCodeVersion DisplayString,
|
|
chStackUnitCodeVersionInFlash DisplayString,
|
|
chStackUnitSerialNumber DisplayString,
|
|
chStackUnitUpTime TimeTicks,
|
|
chStackUnitTemp Gauge32,
|
|
chStackUnitType UnitType,
|
|
chStackUnitSysType F10ChassisType,
|
|
chStackUnitVendorId DisplayString,
|
|
chStackUnitMfgDate F10MfgDate,
|
|
chStackUnitMacAddress MacAddress,
|
|
chStackUnitPartNum DisplayString,
|
|
chStackUnitProductRev DisplayString,
|
|
chStackUnitProductOrder DisplayString,
|
|
chStackUnitCountryCode OCTET STRING,
|
|
chStackUnitNum10GigEtherPorts Integer32,
|
|
chStackUnitNumGigEtherPorts Integer32,
|
|
chStackUnitNumFastEtherPorts Integer32,
|
|
chStackUnitNumFanTrays Integer32,
|
|
chStackUnitNumPowerSupplies Integer32,
|
|
chStackUnitNumPluggableModules Integer32,
|
|
chStackUnitRowStatus RowStatus
|
|
}
|
|
|
|
chStackUnitIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique index for this entry.
|
|
Refer to the object chStackUnitIndexNext."
|
|
::= { chStackUnitEntry 1 }
|
|
|
|
chStackUnitNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit number associated with this unit.
|
|
The unit number can be manually assigned to stack members.
|
|
|
|
Note that the unit number assignement is based on
|
|
the following factors:
|
|
|
|
- if the unit number is requested here, but another unit
|
|
already uses that number, the unit changes its configured
|
|
unit number to the lowest unassigned unit number.
|
|
- if the unit number is 0, i.e. unassigned, then the unit sets
|
|
its configured unit number to the lowest unassigned unit number.
|
|
- if the unit number is configured and no other device uses
|
|
the unit number, then the unit starts using the configured
|
|
unit number.
|
|
- if a unit detects that the maximum number of units already
|
|
exist, the unit sets its unit number to 0, i.e. unassigned,
|
|
and stays in the Initialization state."
|
|
::= { chStackUnitEntry 2 }
|
|
|
|
chStackUnitSID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The index of the chSwitchTypeTable which this unit
|
|
is associated with."
|
|
::= { chStackUnitEntry 3 }
|
|
|
|
chStackUnitMgmtStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mgmtUnit(1),
|
|
standbyUnit(2),
|
|
stackUnit(3),
|
|
unassigned(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the unit is a Management Unit,
|
|
a Stack Unit, or unassigned.
|
|
|
|
Setting this object to mgmtUnit(1) initiates transfer of the
|
|
management functionality to the specified stack unit.
|
|
Object values stackUnit(2) and unassigned(3) cannot be set."
|
|
::= { chStackUnitEntry 4 }
|
|
|
|
chStackUnitHwMgmtPreference OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
unsassigned(1),
|
|
assigned(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"indicates whether the unit is capable of becoming a
|
|
management unit. if it is unsigned, this unit can be a management
|
|
unit."
|
|
::= { chStackUnitEntry 5 }
|
|
|
|
chStackUnitAdmMgmtPreference OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"indicates how likely this unit is to be chosen as
|
|
the management unit. A value of 0 indicates a disabled
|
|
or unassigned preference."
|
|
::= { chStackUnitEntry 6 }
|
|
|
|
chStackUnitModelID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The plugged-in model ID for this unit."
|
|
::= { chStackUnitEntry 7 }
|
|
|
|
chStackUnitStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
unsupported(2),
|
|
codeMismatch(3), -- version mismatch
|
|
configMismatch(4), -- type mismatch
|
|
unitDown(5), -- hardware problem
|
|
notPresent(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this unit."
|
|
::= { chStackUnitEntry 8 }
|
|
|
|
chStackUnitDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of this unit."
|
|
::= { chStackUnitEntry 9 }
|
|
|
|
chStackUnitCodeVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current code version of this unit."
|
|
::= { chStackUnitEntry 10 }
|
|
|
|
chStackUnitCodeVersionInFlash OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Code version of this unit's flash."
|
|
::= { chStackUnitEntry 11 }
|
|
|
|
chStackUnitSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit's serial number."
|
|
::= { chStackUnitEntry 12 }
|
|
|
|
chStackUnitUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system up time of the unit."
|
|
::= { chStackUnitEntry 13 }
|
|
|
|
chStackUnitTemp OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature of the unit."
|
|
::= { chStackUnitEntry 14 }
|
|
|
|
chStackUnitType OBJECT-TYPE
|
|
SYNTAX UnitType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Unit Type identifier for this unit."
|
|
::= { chStackUnitEntry 15 }
|
|
|
|
chStackUnitSysType OBJECT-TYPE
|
|
SYNTAX F10ChassisType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Force10 system type for this unit."
|
|
::= { chStackUnitEntry 16 }
|
|
|
|
chStackUnitVendorId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor id that manufactured this unit."
|
|
::= { chStackUnitEntry 17 }
|
|
|
|
chStackUnitMfgDate OBJECT-TYPE
|
|
SYNTAX F10MfgDate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date the unit is manufactured."
|
|
::= { chStackUnitEntry 18 }
|
|
|
|
chStackUnitMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 6-octet MAC Address assigned
|
|
to this unit."
|
|
::= { chStackUnitEntry 19 }
|
|
|
|
chStackUnitPartNum OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit part number"
|
|
::= { chStackUnitEntry 20 }
|
|
|
|
chStackUnitProductRev OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit manufacturer's product
|
|
revision"
|
|
::= { chStackUnitEntry 21 }
|
|
|
|
chStackUnitProductOrder OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The product order number for this unit."
|
|
::= { chStackUnitEntry 22 }
|
|
|
|
chStackUnitCountryCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit manufacturer's country
|
|
code"
|
|
::= { chStackUnitEntry 23 }
|
|
|
|
chStackUnitNum10GigEtherPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of 10G Ethernet/802.3 interfaces
|
|
in this unit."
|
|
::= { chStackUnitEntry 24 }
|
|
|
|
chStackUnitNumGigEtherPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of 1G Ethernet/802.3 interfaces
|
|
in this unit."
|
|
::= { chStackUnitEntry 25 }
|
|
|
|
chStackUnitNumFastEtherPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of 10/100 Ethernet/802.3 interfaces
|
|
in this unit."
|
|
::= { chStackUnitEntry 26 }
|
|
|
|
chStackUnitNumFanTrays OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of fan trays
|
|
on the unit."
|
|
::= { chStackUnitEntry 27 }
|
|
|
|
chStackUnitNumPowerSupplies OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of power supply
|
|
in the unit."
|
|
::= { chStackUnitEntry 28 }
|
|
|
|
chStackUnitNumPluggableModules OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pluggable modules
|
|
in the stack."
|
|
::= { chStackUnitEntry 29 }
|
|
|
|
chStackUnitRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Creation of new instances requires the object
|
|
chStackUnitIndexNext to be retreived to create
|
|
an entry.
|
|
|
|
active(1) - This instance is active.
|
|
createAndGo(4) - Creates a new instance.
|
|
destroy(6) - Removes this instance."
|
|
::= { chStackUnitEntry 30 }
|
|
|
|
|
|
-- ### Power Supply Table
|
|
|
|
chSysPowerSupplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSysPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of power supply resident
|
|
in the S-series chassis."
|
|
::= { chSysObjects 3 }
|
|
|
|
chSysPowerSupplyEntry OBJECT-TYPE
|
|
SYNTAX ChSysPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A power supply entry containing objects for a
|
|
particular power supply."
|
|
INDEX { chStackUnitNumber,
|
|
chSysPowerSupplyIndex }
|
|
::= { chSysPowerSupplyTable 1 }
|
|
|
|
ChSysPowerSupplyEntry ::=
|
|
SEQUENCE {
|
|
chSysPowerSupplyIndex Integer32,
|
|
chSysPowerSupplyOperStatus INTEGER,
|
|
chSysPowerSupplyType INTEGER
|
|
}
|
|
|
|
chSysPowerSupplyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique index of the power supply."
|
|
::= { chSysPowerSupplyEntry 1 }
|
|
|
|
chSysPowerSupplyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the power supply."
|
|
::= { chSysPowerSupplyEntry 2 }
|
|
|
|
chSysPowerSupplyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ac(1),
|
|
dc(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the power supply."
|
|
::= { chSysPowerSupplyEntry 3 }
|
|
|
|
|
|
-- ## Fan Tray Table
|
|
|
|
chSysFanTrayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSysFanTrayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of fan tray resident in the S-series chassis."
|
|
::= { chSysObjects 4 }
|
|
|
|
chSysFanTrayEntry OBJECT-TYPE
|
|
SYNTAX ChSysFanTrayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A fan entry containing objects for a
|
|
particular fan tray."
|
|
INDEX { chStackUnitNumber,
|
|
chSysFanTrayIndex }
|
|
::= { chSysFanTrayTable 1 }
|
|
|
|
ChSysFanTrayEntry ::=
|
|
SEQUENCE {
|
|
chSysFanTrayIndex Integer32,
|
|
chSysFanTrayOperStatus INTEGER
|
|
}
|
|
|
|
chSysFanTrayIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique index of the fan tray."
|
|
::= { chSysFanTrayEntry 1 }
|
|
|
|
chSysFanTrayOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the fan tray."
|
|
::= { chSysFanTrayEntry 2 }
|
|
|
|
|
|
-- ## Port Table
|
|
|
|
chSysPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSysPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of ports in the S-series chassis."
|
|
::= { chSysObjects 5 }
|
|
|
|
chSysPortEntry OBJECT-TYPE
|
|
SYNTAX ChSysPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port entry containing objects for a
|
|
particular port."
|
|
INDEX { chStackUnitNumber,
|
|
chSysPortIndex }
|
|
::= { chSysPortTable 1 }
|
|
|
|
ChSysPortEntry ::=
|
|
SEQUENCE {
|
|
chSysPortIndex Integer32,
|
|
chSysPortType F10SSeriesPortType,
|
|
chSysPortAdminStatus INTEGER,
|
|
chSysPortOperStatus INTEGER,
|
|
chSysPortIfIndex Integer32,
|
|
chSysPortXfpRecvPower F10HundredthdB
|
|
}
|
|
|
|
chSysPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique index for each slot within the unit.
|
|
"
|
|
::= { chSysPortEntry 1 }
|
|
|
|
chSysPortType OBJECT-TYPE
|
|
SYNTAX F10SSeriesPortType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port in the unit."
|
|
::= { chSysPortEntry 2 }
|
|
|
|
chSysPortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The admin status of the card.
|
|
The port admin status is Up if
|
|
the user has configured it to be up
|
|
otherwise, the admin status is Down."
|
|
::= { chSysPortEntry 3 }
|
|
|
|
chSysPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
portDown(2),
|
|
portProblem(3),
|
|
cardProblem(4),
|
|
cardDown(5),
|
|
notPresent(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status provides further
|
|
condition of the card.
|
|
If the chSysPortAdminStatus is 'up', the
|
|
valid state is
|
|
'ready' - the card is present and
|
|
ready and the chSysPortAdminStatus
|
|
status is 'up'.
|
|
'portDown' - the port is down or not enabled.
|
|
'portProblem' - port hardware problems.
|
|
'cardProblem' - not used. Same as cardDown.
|
|
'cardDown' - the card is downed.
|
|
'notPresent' - the card is not present."
|
|
::= { chSysPortEntry 4 }
|
|
|
|
chSysPortIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of ifIndex in the Interface Mib.
|
|
This index can link to the ifEntry to get
|
|
this interface/port information"
|
|
::= { chSysPortEntry 5 }
|
|
|
|
chSysPortXfpRecvPower OBJECT-TYPE
|
|
SYNTAX F10HundredthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The power signal strength (dB) received for
|
|
10G Ethernet/802.3 interface.
|
|
This object is applied to 10Gig port only.
|
|
"
|
|
::= { chSysPortEntry 6 }
|
|
|
|
|
|
-- ## Stack Port Table
|
|
|
|
chSysStackPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSysStackPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of stack ports in the S-series chassis."
|
|
::= { chSysObjects 6 }
|
|
|
|
chSysStackPortEntry OBJECT-TYPE
|
|
SYNTAX ChSysStackPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A stack port entry containing objects for a
|
|
particular stack port."
|
|
INDEX { chStackUnitNumber,
|
|
chSysStackPortIndex }
|
|
::= { chSysStackPortTable 1 }
|
|
|
|
ChSysStackPortEntry ::=
|
|
SEQUENCE {
|
|
chSysStackPortIndex Integer32,
|
|
chSysStackPortConfiguredMode INTEGER,
|
|
chSysStackPortRunningMode INTEGER,
|
|
chSysStackPortLinkStatus INTEGER,
|
|
chSysStackPortLinkSpeed Gauge32,
|
|
chSysStackPortRxDataRate Counter32,
|
|
chSysStackPortRxErrorRate Counter32,
|
|
chSysStackPortRxTotalErrors Counter32,
|
|
chSysStackPortTxDataRate Counter32,
|
|
chSysStackPortTxErrorRate Counter32,
|
|
chSysStackPortTxTotalErrors Counter32
|
|
}
|
|
|
|
chSysStackPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for each stack port within the unit.
|
|
1 - stack port A,
|
|
2 - stack port B
|
|
"
|
|
::= { chSysStackPortEntry 1 }
|
|
|
|
chSysStackPortConfiguredMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stack(1),
|
|
ethernet(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured mode of the Stack Port. Changes to this
|
|
value happen only after a reset of the unit."
|
|
::= { chSysStackPortEntry 2 }
|
|
|
|
chSysStackPortRunningMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stack(1),
|
|
ethernet(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational mode of the Stack Port."
|
|
::= { chSysStackPortEntry 3 }
|
|
|
|
chSysStackPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link status of the Stack Port. Ports in ethernet
|
|
mode will return a status of down(2)."
|
|
::= { chSysStackPortEntry 4 }
|
|
|
|
chSysStackPortLinkSpeed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Speed of the Stack Port measured in Gb/s. Ports
|
|
in ethernet mode will return a speed of 0."
|
|
::= { chSysStackPortEntry 5 }
|
|
|
|
chSysStackPortRxDataRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received Data rate on the stacking port.
|
|
Measured in Mb/s.
|
|
Ports in ethernet mode will return 0."
|
|
::= { chSysStackPortEntry 6 }
|
|
|
|
chSysStackPortRxErrorRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received error rate on the stack port.
|
|
Measured in Errors per Second.
|
|
Ports in ethernet mode will return 0."
|
|
::= { chSysStackPortEntry 7 }
|
|
|
|
chSysStackPortRxTotalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received number of errors since boot.
|
|
The counter may wrap. Ports in ethernet mode
|
|
will return 0."
|
|
::= { chSysStackPortEntry 8 }
|
|
|
|
chSysStackPortTxDataRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted Data rate on the stacking port.
|
|
Measured in Mb/s.
|
|
Ports in ethernet mode will return 0."
|
|
::= { chSysStackPortEntry 9 }
|
|
|
|
chSysStackPortTxErrorRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted error rate on the stack port.
|
|
Measured in Errors per Second.
|
|
Ports in ethernet mode will return 0."
|
|
::= { chSysStackPortEntry 10 }
|
|
|
|
chSysStackPortTxTotalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted number of errors since boot.
|
|
The counter may wrap. Ports in ethernet mode
|
|
will return 0."
|
|
::= { chSysStackPortEntry 11 }
|
|
|
|
|
|
-- ## Processor Table
|
|
|
|
-- Each stack unit has a single processor.
|
|
-- The Processor table contains information on the
|
|
-- processor and the memory.
|
|
|
|
chSysProcessorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSysProcessorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Processors resident in the S-series chassis."
|
|
::= { chSysObjects 7 }
|
|
|
|
chSysProcessorEntry OBJECT-TYPE
|
|
SYNTAX ChSysProcessorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Processor entries."
|
|
INDEX { chStackUnitNumber }
|
|
::= { chSysProcessorTable 1 }
|
|
|
|
ChSysProcessorEntry ::=
|
|
SEQUENCE {
|
|
chSysProcessorModule F10ProcessorModuleType,
|
|
chSysProcessorUpTime TimeTicks,
|
|
chSysProcessorNvramSize Integer32,
|
|
chSysProcessorMemSize Integer32
|
|
}
|
|
|
|
chSysProcessorModule OBJECT-TYPE
|
|
SYNTAX F10ProcessorModuleType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of module running on the Processor."
|
|
::= { chSysProcessorEntry 1 }
|
|
|
|
chSysProcessorUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SysUpTime for this Processor."
|
|
::= { chSysProcessorEntry 2 }
|
|
|
|
chSysProcessorNvramSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Non-volatile RAM in Kbytes."
|
|
::= { chSysProcessorEntry 3 }
|
|
|
|
chSysProcessorMemSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the RAM in Mb."
|
|
::= { chSysProcessorEntry 4 }
|
|
|
|
|
|
-- ## Software Module Table
|
|
|
|
chSysSwModuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChSysSwModuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of software version information in
|
|
a processor."
|
|
::= { chSysObjects 8 }
|
|
|
|
chSysSwModuleEntry OBJECT-TYPE
|
|
SYNTAX ChSysSwModuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A software module entry containing version
|
|
number information for a particular processor."
|
|
INDEX { chStackUnitNumber }
|
|
::= { chSysSwModuleTable 1 }
|
|
|
|
ChSysSwModuleEntry ::=
|
|
SEQUENCE {
|
|
chSysSwRuntimeImgVersion DisplayString,
|
|
chSysSwRuntimeImgDate F10SwDate,
|
|
chSysSwCurrentBootImgVersion DisplayString,
|
|
chSysSwCurrentBootImgDate DateAndTime,
|
|
chSysSwCurrentBootImgStatus INTEGER,
|
|
chSysSwBackupBootImgVersion DisplayString,
|
|
chSysSwBackupBootImgDate DateAndTime,
|
|
chSysSwBackupBootImgStatus INTEGER,
|
|
chSysSwNextRebootImage INTEGER,
|
|
chSysSwCurrentBootImage INTEGER
|
|
}
|
|
|
|
chSysSwRuntimeImgVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the software
|
|
module version that is currently
|
|
running on the processor.
|
|
The software release version is in
|
|
the format as follow:
|
|
<major version>.<minor version>.<minor
|
|
version>......
|
|
'1.1' indicate major version of 1 and
|
|
minor release of 1."
|
|
::= { chSysSwModuleEntry 1 }
|
|
|
|
chSysSwRuntimeImgDate OBJECT-TYPE
|
|
SYNTAX F10SwDate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The release date of this software
|
|
module."
|
|
::= { chSysSwModuleEntry 2 }
|
|
|
|
chSysSwCurrentBootImgVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software release version is in
|
|
the format as follow:
|
|
<major version>.<minor version>.<minor
|
|
version>......
|
|
'1.1' indicate major version of 1 and
|
|
minor release of 1."
|
|
::= { chSysSwModuleEntry 3 }
|
|
|
|
chSysSwCurrentBootImgDate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The release date of this software module
|
|
If the CPU is reset, the software module
|
|
running date (chSysSwModuleRunningDate)
|
|
will change to this current date."
|
|
::= { chSysSwModuleEntry 4 }
|
|
|
|
chSysSwCurrentBootImgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
failed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fill this in later"
|
|
::= { chSysSwModuleEntry 5 }
|
|
|
|
chSysSwBackupBootImgVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software release version is in
|
|
the format as follow:
|
|
<major version>.<minor version>.<minor
|
|
version>......
|
|
'1.1' indicate major version of 1 and
|
|
minor release of 1."
|
|
::= { chSysSwModuleEntry 6 }
|
|
|
|
chSysSwBackupBootImgDate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The backup boot image released date."
|
|
::= { chSysSwModuleEntry 7 }
|
|
|
|
chSysSwBackupBootImgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
failed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the backup boot image."
|
|
::= { chSysSwModuleEntry 8 }
|
|
|
|
chSysSwNextRebootImage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bootImage-A(1),
|
|
bootImage-B(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The boot flash image selection. When the
|
|
chassis is rebooted, this is the boot
|
|
image to use."
|
|
::= { chSysSwModuleEntry 9 }
|
|
|
|
chSysSwCurrentBootImage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bootImage-A(1),
|
|
bootImage-B(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current boot image. This is the boot image described by the
|
|
chSysSwCurrentBootImgVersion, chSysSwCurrentBootImgDate, and
|
|
chSysSwCurrentBootImgStatus objects.
|
|
"
|
|
::= { chSysSwModuleEntry 10 }
|
|
|
|
|
|
-- ## Stack Unit CPU and Memory Utilization
|
|
|
|
chStackUnitUtilTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChStackUnitUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table listing the cpu and memory utilization
|
|
in the stack unit."
|
|
::= { chSysObjects 9 }
|
|
|
|
chStackUnitUtilEntry OBJECT-TYPE
|
|
SYNTAX ChStackUnitUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in each processor cpu and mmory utilization"
|
|
INDEX { chStackUnitNumber }
|
|
::= { chStackUnitUtilTable 1 }
|
|
|
|
ChStackUnitUtilEntry ::=
|
|
SEQUENCE {
|
|
chStackUnitCpuType F10ProcessorModuleType,
|
|
chStackUnitCpuUtil5Sec Gauge32,
|
|
chStackUnitCpuUtil1Min Gauge32,
|
|
chStackUnitCpuUtil5Min Gauge32,
|
|
chStackUnitMemUsageUtil Gauge32
|
|
}
|
|
|
|
chStackUnitCpuType OBJECT-TYPE
|
|
SYNTAX F10ProcessorModuleType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of module running on the Processor."
|
|
::= { chStackUnitUtilEntry 1 }
|
|
|
|
chStackUnitCpuUtil5Sec OBJECT-TYPE
|
|
SYNTAX Gauge32(0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU utilization in percentage for last 5 seconds."
|
|
::= { chStackUnitUtilEntry 2 }
|
|
|
|
chStackUnitCpuUtil1Min OBJECT-TYPE
|
|
SYNTAX Gauge32(0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU utilization in percentage for last 1 minute."
|
|
::= { chStackUnitUtilEntry 3 }
|
|
|
|
chStackUnitCpuUtil5Min OBJECT-TYPE
|
|
SYNTAX Gauge32(0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU utilization in percentage for last 5 minutes."
|
|
::= { chStackUnitUtilEntry 4 }
|
|
|
|
chStackUnitMemUsageUtil OBJECT-TYPE
|
|
SYNTAX Gauge32(0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total memory usage in percentage."
|
|
::= { chStackUnitUtilEntry 5 }
|
|
|
|
|
|
--
|
|
-- ## Notifications
|
|
--
|
|
|
|
chAlarmMibNotifications OBJECT IDENTIFIER ::= { chAlarmObjects 0 }
|
|
|
|
--
|
|
-- TRAPS
|
|
--
|
|
|
|
chAlarmStackUnitDown NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack unit operational status is down."
|
|
::= { chAlarmMibNotifications 1 }
|
|
|
|
chAlarmStackUnitUp NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack unit operational status is up."
|
|
::= { chAlarmMibNotifications 2 }
|
|
|
|
|
|
chAlarmStackUnitReset NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack unit is reset."
|
|
::= { chAlarmMibNotifications 3 }
|
|
|
|
chAlarmStackUnitOffline NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack unit is set to offline."
|
|
::= { chAlarmMibNotifications 4 }
|
|
|
|
chAlarmStackUnitCodeMismatch NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack unit is not the same code as a management
|
|
stack."
|
|
::= { chAlarmMibNotifications 5 }
|
|
|
|
chAlarmStackPortLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack port is connected to annother stack member."
|
|
::= { chAlarmMibNotifications 6 }
|
|
|
|
chAlarmStackPortLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { chAlarmVarInteger,
|
|
chAlarmVarString,
|
|
chAlarmVarSlot,
|
|
chAlarmVarPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The driver/agent generate this trap when a
|
|
stack port is disconnected from annother stack member."
|
|
::= { chAlarmMibNotifications 7 }
|
|
|
|
|
|
-- ### conformance information ###
|
|
f10sSeriesMibConformance OBJECT IDENTIFIER ::= { f10SSerChassisMib 2 }
|
|
f10sSeriesMibCompliances OBJECT IDENTIFIER ::= { f10sSeriesMibConformance 1 }
|
|
f10sSeriesMibGroups OBJECT IDENTIFIER ::= { f10sSeriesMibConformance 2 }
|
|
|
|
-- ## compliance statements
|
|
f10sSeriesMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for Force10
|
|
product which implement the f10
|
|
S-Series Chassis MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
f10sSeriesComponentGroup,
|
|
f10sSeriesSystemGroup,
|
|
f10sSeriesNotificationGroup
|
|
}
|
|
::= { f10sSeriesMibCompliances 1 }
|
|
|
|
-- ## units of conformance
|
|
|
|
f10sSeriesComponentGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
chNumStackUnits,
|
|
chNumMaxStackableUnits,
|
|
chStackUnitIndexNext
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the
|
|
overall S-series chassis information."
|
|
::= { f10sSeriesMibGroups 1 }
|
|
|
|
f10sSeriesSystemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
chSwitchTypeSID,
|
|
chSwitchTypeModelID,
|
|
chSwitchTypeCodeType,
|
|
chSwitchTypeMgmtPreference,
|
|
chStackUnitNumber,
|
|
chStackUnitSID,
|
|
chStackUnitMgmtStatus,
|
|
chStackUnitHwMgmtPreference,
|
|
chStackUnitAdmMgmtPreference,
|
|
chStackUnitModelID,
|
|
chStackUnitStatus,
|
|
chStackUnitDescription,
|
|
chStackUnitCodeVersion,
|
|
chStackUnitCodeVersionInFlash,
|
|
chStackUnitSerialNumber,
|
|
chStackUnitUpTime,
|
|
chStackUnitTemp,
|
|
chStackUnitType,
|
|
chStackUnitSysType,
|
|
chStackUnitVendorId,
|
|
chStackUnitMfgDate,
|
|
chStackUnitMacAddress,
|
|
chStackUnitPartNum,
|
|
chStackUnitProductRev,
|
|
chStackUnitProductOrder,
|
|
chStackUnitCountryCode,
|
|
chStackUnitNum10GigEtherPorts,
|
|
chStackUnitNumGigEtherPorts,
|
|
chStackUnitNumFastEtherPorts,
|
|
chStackUnitNumFanTrays,
|
|
chStackUnitNumPowerSupplies,
|
|
chStackUnitNumPluggableModules,
|
|
chStackUnitRowStatus,
|
|
chSysPowerSupplyIndex,
|
|
chSysPowerSupplyOperStatus,
|
|
chSysPowerSupplyType,
|
|
chSysFanTrayIndex,
|
|
chSysFanTrayOperStatus,
|
|
chSysPortIndex,
|
|
chSysPortType,
|
|
chSysPortAdminStatus ,
|
|
chSysPortOperStatus,
|
|
chSysPortIfIndex,
|
|
chSysPortXfpRecvPower,
|
|
chSysStackPortIndex,
|
|
chSysStackPortConfiguredMode,
|
|
chSysStackPortRunningMode,
|
|
chSysStackPortLinkStatus,
|
|
chSysStackPortLinkSpeed,
|
|
chSysStackPortRxDataRate,
|
|
chSysStackPortRxErrorRate,
|
|
chSysStackPortRxTotalErrors,
|
|
chSysStackPortTxDataRate,
|
|
chSysStackPortTxErrorRate,
|
|
chSysStackPortTxTotalErrors,
|
|
chSysProcessorModule,
|
|
chSysProcessorUpTime,
|
|
chSysProcessorNvramSize,
|
|
chSysProcessorMemSize,
|
|
chSysSwRuntimeImgVersion,
|
|
chSysSwRuntimeImgDate,
|
|
chSysSwCurrentBootImgVersion,
|
|
chSysSwCurrentBootImgDate,
|
|
chSysSwCurrentBootImgStatus,
|
|
chSysSwBackupBootImgVersion,
|
|
chSysSwBackupBootImgDate,
|
|
chSysSwBackupBootImgStatus,
|
|
chSysSwNextRebootImage,
|
|
chSysSwCurrentBootImage,
|
|
chStackUnitCpuType,
|
|
chStackUnitCpuUtil5Sec,
|
|
chStackUnitCpuUtil1Min,
|
|
chStackUnitCpuUtil5Min,
|
|
chStackUnitMemUsageUtil
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the
|
|
chassis system hardware information."
|
|
::= { f10sSeriesMibGroups 2 }
|
|
|
|
f10sSeriesNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
chAlarmStackUnitDown,
|
|
chAlarmStackUnitUp,
|
|
chAlarmStackUnitReset,
|
|
chAlarmStackUnitOffline,
|
|
chAlarmStackUnitCodeMismatch,
|
|
chAlarmStackPortLinkUp,
|
|
chAlarmStackPortLinkDown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notifications for Force10 S-Series Chassis mib"
|
|
::= { f10sSeriesMibGroups 3 }
|
|
|
|
END
|
|
|