david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/dell/FORCE10-SYSTEM-COMPONENT-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

582 lines
14 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- FORCE10-SYSTEM-COMPONENT-MIB
--
--
-- Copyright (c) 2003-2005 by Force10 Networks, Inc.
-- All rights reserved.
-- *****************************************************************
--
FORCE10-SYSTEM-COMPONENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString
FROM RFC1213-MIB
f10Mgmt
FROM FORCE10-SMI
F10CamPartitionType
FROM FORCE10-TC
;
f10SysComponentMib MODULE-IDENTITY
LAST-UPDATED "200510050000Z"
ORGANIZATION "Force10 Networks, Inc."
CONTACT-INFO
"Force10 Networks, Inc
1440 McCarthy Blvd
Milpitas, CA 95035
(408) 571-3500
support@force10networks.com
http://www.force10networks.com"
DESCRIPTION
"Force10 System component MIB.
Force10 System component allow user to view the SW information
of a component in the system.
Currently, the available component information that are avaibale
are
1) CAM Entries on linecard
- Overall system CAM usage table
- L2 Ingress or Egress CAM Usage
- L3 Ingress or Egress CAM Usage
"
::= { f10Mgmt 7 }
f10SysComponentObjects OBJECT IDENTIFIER ::= { f10SysComponentMib 1 }
f10CamEntries OBJECT IDENTIFIER ::= { f10SysComponentObjects 1 }
f10SysComponentTrap OBJECT IDENTIFIER ::= { f10SysComponentObjects 2 }
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
camUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CamUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of general CAM usages table."
::= { f10CamEntries 1 }
camUsageEntry OBJECT-TYPE
SYNTAX CamUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of CAM usage table.
The table show the different partition of CAM
"
INDEX { camUsageSlot, camUsagePipeNum, camUsagePartId }
::= { camUsageTable 1 }
CamUsageEntry ::= SEQUENCE {
camUsageSlot Integer32,
camUsagePipeNum Integer32,
camUsagePartId F10CamPartitionType,
camUsagePartDesc DisplayString,
camUsageTotal Integer32,
camUsageUsed Integer32
}
camUsageSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The slot number of linecard where the CAM is located
"
::= { camUsageEntry 1 }
camUsagePipeNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The port pipe number on the linecard where the CAM is located
"
::= { camUsageEntry 2 }
camUsagePartId OBJECT-TYPE
SYNTAX F10CamPartitionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The partition id of the CAM on the line card.
"
::= { camUsageEntry 3 }
camUsagePartDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the CAM partition id."
::= { camUsageEntry 4 }
camUsageTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to this CAM partition
"
::= { camUsageEntry 5 }
camUsageUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured to this CAM partition
"
::= { camUsageEntry 6 }
-- End of General CAM Usage Entry
camUsageL2Table OBJECT-TYPE
SYNTAX SEQUENCE OF CamUsageL2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Layer 2 or switch layer CAM usages table."
::= { f10CamEntries 2 }
camUsageL2Entry OBJECT-TYPE
SYNTAX CamUsageL2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Layer 2 (switch layer ) CAM usage table.
The table show the different partition of CAM and if the cam
is used in the Ingress or Egress.
"
INDEX { camUsageL2Slot, camUsageL2PipeId }
::= { camUsageL2Table 1 }
CamUsageL2Entry ::= SEQUENCE {
camUsageL2Slot Integer32,
camUsageL2PipeId Integer32,
camUsageL2IngAclTotal Integer32,
camUsageL2IngAclUsed Integer32,
camUsageL2IngFibTotal Integer32,
camUsageL2IngFibUsed Integer32,
camUsageL2EgrAclTotal Integer32,
camUsageL2EgrAclUsed Integer32
}
camUsageL2Slot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The slot number of linecard where the CAM is located
"
::= { camUsageL2Entry 1 }
camUsageL2PipeId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The port pipe number on the linecard where the CAM is located
"
::= { camUsageL2Entry 2 }
camUsageL2IngAclTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 2 ingress ACL
"
::= { camUsageL2Entry 3 }
camUsageL2IngAclUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 2 ingress ACL
"
::= { camUsageL2Entry 4 }
camUsageL2IngFibTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 2 ingress FIB
"
::= { camUsageL2Entry 7 }
camUsageL2IngFibUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 2 ingress FIB
"
::= { camUsageL2Entry 8 }
camUsageL2EgrAclTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 2 Egress ACL
"
::= { camUsageL2Entry 9 }
camUsageL2EgrAclUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 2 Egress Acl
"
::= { camUsageL2Entry 10 }
-- End of camUsageL2Entry
camUsageL3Table OBJECT-TYPE
SYNTAX SEQUENCE OF CamUsageL3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Layer 3 or router layer CAM usages table."
::= { f10CamEntries 3 }
camUsageL3Entry OBJECT-TYPE
SYNTAX CamUsageL3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Layer 3 (router layer ) CAM usage table.
The table show the different partition of CAM and if the cam
is used in the Ingress or Egress.
"
INDEX { camUsageL3Slot, camUsageL3PipeId }
::= { camUsageL3Table 1 }
CamUsageL3Entry ::= SEQUENCE {
camUsageL3Slot Integer32,
camUsageL3PipeId Integer32,
camUsageL3IngFibTotal Integer32,
camUsageL3IngFibUsed Integer32,
camUsageL3IngSysFlowTotal Integer32,
camUsageL3IngSysFlowUsed Integer32,
camUsageL3IngTrcListTotal Integer32,
camUsageL3IngTrcListUsed Integer32,
camUsageL3IngMcastFibTotal Integer32,
camUsageL3IngMcastFibUsed Integer32,
camUsageL3IngQosTotal Integer32,
camUsageL3IngQosUsed Integer32,
camUsageL3IngPbrTotal Integer32,
camUsageL3IngPbrUsed Integer32,
camUsageL3IngAclTotal Integer32,
camUsageL3IngAclUsed Integer32,
camUsageL3EgrAclTotal Integer32,
camUsageL3EgrAclUsed Integer32
}
camUsageL3Slot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The slot number of linecard where the CAM is located
"
::= { camUsageL3Entry 1 }
camUsageL3PipeId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The port pipe number on the linecard where the CAM is located
"
::= { camUsageL3Entry 2 }
camUsageL3IngFibTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress FIB
"
::= { camUsageL3Entry 3 }
camUsageL3IngFibUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress FIB
"
::= { camUsageL3Entry 4 }
camUsageL3IngSysFlowTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress system flow
"
::= { camUsageL3Entry 5 }
camUsageL3IngSysFlowUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress system flow
"
::= { camUsageL3Entry 6 }
camUsageL3IngTrcListTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress trace list
"
::= { camUsageL3Entry 7 }
camUsageL3IngTrcListUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress trace list
"
::= { camUsageL3Entry 8 }
camUsageL3IngMcastFibTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress multicast FIB
"
::= { camUsageL3Entry 9 }
camUsageL3IngMcastFibUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress multicast FIB
"
::= { camUsageL3Entry 10 }
camUsageL3IngQosTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress QOS
"
::= { camUsageL3Entry 11 }
camUsageL3IngQosUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress QOS
"
::= { camUsageL3Entry 12 }
camUsageL3IngPbrTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress PBR
"
::= { camUsageL3Entry 13 }
camUsageL3IngPbrUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress QOS
"
::= { camUsageL3Entry 14 }
camUsageL3IngAclTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 ingress ACL
"
::= { camUsageL3Entry 15 }
camUsageL3IngAclUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 ingress ACL
"
::= { camUsageL3Entry 16 }
camUsageL3EgrAclTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam size allocated to layer 3 egress ACL
"
::= { camUsageL3Entry 17 }
camUsageL3EgrAclUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total cam used or configured in layer 3 egress ACL
"
::= { camUsageL3Entry 18 }
--
-- ## Alarm Group or Traps
--
sysCompAlarmMibNotifications OBJECT IDENTIFIER ::= { f10SysComponentTrap 0 }
sysCompAlarmVariable OBJECT IDENTIFIER ::= { f10SysComponentTrap 1 }
--
-- TRAP VarBind Data
--
sysCompAlarmLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the message warning level"
::= { sysCompAlarmVariable 1 }
sysCompAlarmVarString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"An generic string value in the TRAP object"
::= { sysCompAlarmVariable 2 }
sysCompSlotId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The associated LineCard in the TRAP object"
::= { sysCompAlarmVariable 3 }
sysCompPortPipe OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The associated port pipe in the TRAP object"
::= { sysCompAlarmVariable 4 }
sysCompCamPartId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The associated CAM partion name in the TRAP object"
::= { sysCompAlarmVariable 5 }
--
-- TRAPS
--
camUsageThresholdExceed NOTIFICATION-TYPE
OBJECTS { sysCompAlarmLevel,
sysCompAlarmVarString,
sysCompSlotId,
sysCompPortPipe,
sysCompCamPartId
}
STATUS current
DESCRIPTION
"The agent generate this trap when the
cam usage for a partition is exceeded."
::= { sysCompAlarmMibNotifications 1 }
camIsFull NOTIFICATION-TYPE
OBJECTS { sysCompAlarmLevel,
sysCompAlarmVarString,
sysCompSlotId,
sysCompPortPipe,
sysCompCamPartId
}
STATUS current
DESCRIPTION
"The agent generate this trap when the
cam is fully used."
::= { sysCompAlarmMibNotifications 2 }
END
Reference in New Issue View Git Blame Copy Permalink