1558 lines
39 KiB
Plaintext
1558 lines
39 KiB
Plaintext
|
|
|
|
-- Telecom MIB
|
|
-- ===============================================================================
|
|
-- Revision History
|
|
-- v0.01 2014-06-10 Lilinhua
|
|
--
|
|
-- enterprise id: .1.3.6.1.4.1.935.10(device).2(matAgent).2(matTraps)
|
|
--
|
|
-- ===============================================================================
|
|
TELECOM-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
enterprises,Counter, IpAddress
|
|
FROM RFC1155-SMI;
|
|
PositiveInteger ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is a non-zero and non-negative value."
|
|
SYNTAX INTEGER (1..2147483647)
|
|
NonNegativeInteger ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is a non-negative value."
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ppc OBJECT IDENTIFIER ::= { enterprises 935 }
|
|
device OBJECT IDENTIFIER ::= { ppc 10 }
|
|
matAgent OBJECT IDENTIFIER ::= { device 2 }
|
|
matObjects OBJECT IDENTIFIER ::= { matAgent 1 }
|
|
matTraps OBJECT IDENTIFIER ::= { matAgent 2 }
|
|
matController OBJECT IDENTIFIER ::= { matObjects 1 }
|
|
matInverter OBJECT IDENTIFIER ::= { matObjects 2 }
|
|
matSts OBJECT IDENTIFIER ::= { matObjects 3 }
|
|
matDryContact OBJECT IDENTIFIER ::= { matObjects 4 }
|
|
matConfig OBJECT IDENTIFIER ::= { matObjects 5 }
|
|
matTrapTargets OBJECT IDENTIFIER ::= { matObjects 6 }
|
|
-- ========================================================================
|
|
-- matController
|
|
-- ========================================================================
|
|
matConSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 15 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Controller serial number."
|
|
::= { matController 1 }
|
|
matConName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 31 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Power system name."
|
|
::= { matController 2 }
|
|
matConWarningState OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 31 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The values indicate the unrestored traps.
|
|
For example,
|
|
if 'Controller Battery Low' and 'Controller temperature High'
|
|
the agent send
|
|
the trap 85 and trap 87 to
|
|
NMS,
|
|
so the value of matConWarningState should be '85,87'.
|
|
And then the two events restored, the value of matConWarningState
|
|
should change to empty."
|
|
::= { matController 3 }
|
|
matConTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Temperature of the controller, the unit is 0.1 degree."
|
|
::= { matController 4 }
|
|
matAgentSoftwareVerison OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 31 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Network Management Card software/firmware version."
|
|
::= { matController 5 }
|
|
-- ========================================================================
|
|
-- matInverter
|
|
-- ========================================================================
|
|
matInvModuleNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of Inverter modules."
|
|
::= { matInverter 1 }
|
|
matInvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MATInvEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "This table list Inverter message."
|
|
::= { matInverter 2 }
|
|
matInvEntry OBJECT-TYPE
|
|
SYNTAX MATInvEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry containing information applicable to a particular Inverter module."
|
|
INDEX { matInvModuleIndex }
|
|
::= { matInvTable 1 }
|
|
MATInvEntry::= SEQUENCE {
|
|
matInvModuleIndex PositiveInteger,
|
|
matInvSerialNum DisplayString,
|
|
matInvFirmwareVersion DisplayString,
|
|
matInvHardwareVersion DisplayString,
|
|
matInvWarningState DisplayString,
|
|
matInvOutputVoltage NonNegativeInteger,
|
|
matInvOutputCurrent NonNegativeInteger,
|
|
matInvBatteryVoltage NonNegativeInteger,
|
|
matInvOutputFreq NonNegativeInteger,
|
|
matInvOutputPower NonNegativeInteger,
|
|
matInvPowerLimit NonNegativeInteger,
|
|
matInvRunTime NonNegativeInteger,
|
|
matInvTemperature INTEGER,
|
|
matInvLineVoltage NonNegativeInteger,
|
|
matInvLineFreq NonNegativeInteger,
|
|
matInvMbsPosition INTEGER,
|
|
matInvRunMode INTEGER,
|
|
matInvPriority INTEGER,
|
|
matConfInvOutputVoltage NonNegativeInteger,
|
|
matConfInvInputVoltage NonNegativeInteger,
|
|
matConfInvOutputVoltHighLoss NonNegativeInteger,
|
|
matConfInvOutputVoltLowLoss NonNegativeInteger,
|
|
matConfInvOutputPower NonNegativeInteger,
|
|
matConfInvOutputFreq NonNegativeInteger,
|
|
matInvPhaseType INTEGER,
|
|
matInvOnOffStatus INTEGER
|
|
}
|
|
matInvModuleIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The index of Inverter module."
|
|
::= { matInvEntry 1 }
|
|
matInvSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 15 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Module serial number."
|
|
::= { matInvEntry 2 }
|
|
matInvFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 7 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Firmware version."
|
|
::= { matInvEntry 3 }
|
|
matInvHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 7 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hardware version."
|
|
::= { matInvEntry 4 }
|
|
matInvWarningState OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 63 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The values indicate the unrestored traps.
|
|
For example,
|
|
if 'Inverter fault' and 'Inverter Over-loading'
|
|
the agent send
|
|
the trap 1 and trap 3 to
|
|
NMS,
|
|
so the value of matConWarningState should be '1,3'.
|
|
And then the two events restored, the value of matConWarningState
|
|
should change to empty."
|
|
::= { matInvEntry 5 }
|
|
matInvOutputVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter Output Voltage, the unit is 0.1 Volt."
|
|
::= { matInvEntry 6 }
|
|
matInvOutputCurrent OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter Output Current, unit is 0.1 amp."
|
|
::= { matInvEntry 7 }
|
|
matInvBatteryVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter Battery voltage, the unit is 0.1 Volt."
|
|
::= { matInvEntry 8 }
|
|
matInvOutputFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output frequency, the unit is 0.1 Hz."
|
|
::= { matInvEntry 9 }
|
|
matInvOutputPower OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output power, the unit is VA."
|
|
::= { matInvEntry 10 }
|
|
matInvPowerLimit OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Power Limit Status of Inverter module, the unit is percent."
|
|
::= { matInvEntry 11 }
|
|
matInvRunTime OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Run time, the unit is Hour."
|
|
::= { matInvEntry 12 }
|
|
matInvTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Temperature of the inverter, the unit is 0.1 degree."
|
|
::= { matInvEntry 13 }
|
|
matInvLineVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line voltage of 3.5K, the unit is 0.1 Volt."
|
|
::= { matInvEntry 14 }
|
|
matInvLineFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line frequency of 3.5K, the unit is 0.1 Hz."
|
|
::= { matInvEntry 15 }
|
|
matInvMbsPosition OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-3) command
|
|
transfer(1),
|
|
normal(2),
|
|
bypass(3),
|
|
invalid(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "MBS position of 3.5K."
|
|
::= { matInvEntry 16 }
|
|
matInvRunMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-5) command
|
|
powerOn(1),
|
|
standby(2),
|
|
bypass(3),
|
|
line(4),
|
|
battery(5),
|
|
fault(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Currently run mode of 3.5K."
|
|
::= { matInvEntry 17 }
|
|
matInvPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
batteryMode(1),
|
|
lineMode(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Priority of 3.5K."
|
|
::= { matInvEntry 18 }
|
|
matConfInvOutputVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Rating Output voltage, the unit is 0.1 Volt."
|
|
::= { matInvEntry 19 }
|
|
matConfInvInputVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Rating Input voltage, the unit is 0.1 Volt."
|
|
::= { matInvEntry 20 }
|
|
matConfInvOutputVoltHighLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output High Loss voltage, the unit is 0.1 Volt."
|
|
::= { matInvEntry 21 }
|
|
matConfInvOutputVoltLowLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Low loss voltage, the unit is 0.1 Volt."
|
|
::= { matInvEntry 22 }
|
|
matConfInvOutputPower OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Rating output power, the unit is VA."
|
|
::= { matInvEntry 23 }
|
|
matConfInvOutputFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Rating output frequency, the unit is 0.1 Hz."
|
|
::= { matInvEntry 24 }
|
|
matInvPhaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
singlePhase(1),
|
|
threePhase(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Phase type."
|
|
::= { matInvEntry 25 }
|
|
matInvOnOffStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
shutdown(1),
|
|
start(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter module On/Off status."
|
|
::= { matInvEntry 26 }
|
|
-- ========================================================================
|
|
-- matSts
|
|
-- ========================================================================
|
|
matStsModuleNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of STS modules."
|
|
::= { matSts 1 }
|
|
matStsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MATStsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "This table list STS message."
|
|
::= { matSts 2 }
|
|
matStsEntry OBJECT-TYPE
|
|
SYNTAX MATStsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry containing information applicable to a particular STS module."
|
|
INDEX { matStsModuleIndex }
|
|
::= { matStsTable 1 }
|
|
MATStsEntry::= SEQUENCE {
|
|
matStsModuleIndex PositiveInteger,
|
|
matStsModuleType DisplayString,
|
|
matStsSerialNum DisplayString,
|
|
matStsFirmwareVersion DisplayString,
|
|
matStsHardwareVersion DisplayString,
|
|
matStsWarningState DisplayString,
|
|
matStsMainInputVoltage NonNegativeInteger,
|
|
matStsMainInputFreq NonNegativeInteger,
|
|
matStsInvInputVoltage NonNegativeInteger,
|
|
matStsInvInputFreq NonNegativeInteger,
|
|
matStsOutputVoltage NonNegativeInteger,
|
|
matStsOutputCurrent NonNegativeInteger,
|
|
matStsOutputPower NonNegativeInteger,
|
|
matStsOutputFreq NonNegativeInteger,
|
|
matStsRuntime NonNegativeInteger,
|
|
matStsTemperature INTEGER,
|
|
matStsMbsStatus INTEGER,
|
|
matStsStatus INTEGER,
|
|
matStsRunningMode INTEGER,
|
|
matStsMainHighLossVoltage NonNegativeInteger,
|
|
matStsMainLowLossVoltage NonNegativeInteger,
|
|
matStsInvHighLossVoltage NonNegativeInteger,
|
|
matStsInvLosLossVoltage NonNegativeInteger
|
|
}
|
|
matStsModuleIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The index of STS module."
|
|
::= { matStsEntry 1 }
|
|
matStsModuleType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 3 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Module type, 050 represent 50A, 100 represent 100A."
|
|
::= { matStsEntry 2 }
|
|
matStsSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 15 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Module serial number."
|
|
::= { matStsEntry 3 }
|
|
matStsFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 7 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Firmware version."
|
|
::= { matStsEntry 4 }
|
|
matStsHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 7 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hardware version."
|
|
::= { matStsEntry 5 }
|
|
matStsWarningState OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 63 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The values indicate the unrestored traps.
|
|
For example,
|
|
if 'STS running in fault mode' and 'STS fan fault'
|
|
the agent send
|
|
the trap 59 and trap 61 to
|
|
NMS,
|
|
so the value of matConWarningState should be '59,61'.
|
|
And then the two events restored, the value of matConWarningState
|
|
should change to empty."
|
|
::= { matStsEntry 6 }
|
|
matStsMainInputVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Mains I/P voltage, the unit is 0.1 Volts."
|
|
::= { matStsEntry 7 }
|
|
matStsMainInputFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Mains I/P frequency, the unit is 0.1 Hz."
|
|
::= { matStsEntry 8 }
|
|
matStsInvInputVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS INV I/P voltage, the unit is 0.1 volts."
|
|
::= { matStsEntry 9 }
|
|
matStsInvInputFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS INV I/P frequency, the unit is 0.1 Hz."
|
|
::= { matStsEntry 10 }
|
|
matStsOutputVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS O/P voltage, the unit is 0.1 volts."
|
|
::= { matStsEntry 11 }
|
|
matStsOutputCurrent OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS O/P Current, the unit is 0.1 amp."
|
|
::= { matStsEntry 12 }
|
|
matStsOutputPower OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS O/P Power, the unit is VA."
|
|
::= { matStsEntry 13 }
|
|
matStsOutputFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS O/P frequency, the unit is 0.1 Hz."
|
|
::= { matStsEntry 14 }
|
|
matStsRuntime OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Runtime, the unit is Hour."
|
|
::= { matStsEntry 15 }
|
|
matStsTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS module's Temperature, the unit is 0.1 degree."
|
|
::= { matStsEntry 16 }
|
|
matStsMbsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- QS: 0 1 2 3 4 5 6 other
|
|
-- matStsMbsStatus: 1 2 6(err) 3 4 6(err) 5 6(err)
|
|
normalPosition(1),
|
|
issPosition(2),
|
|
ibpPosition(3),
|
|
mssPosition(4),
|
|
mbpPosition(5),
|
|
mbsError(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS MBS status."
|
|
::= { matStsEntry 17 }
|
|
matStsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
onLine(1),
|
|
offLine(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS status."
|
|
::= { matStsEntry 18 }
|
|
matStsRunningMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inverter(1),
|
|
mains(2),
|
|
noOutput(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Running Mode."
|
|
::= { matStsEntry 19 }
|
|
matStsMainHighLossVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Main high loss voltage, the unit is 0.1 volts."
|
|
::= { matStsEntry 20 }
|
|
matStsMainLowLossVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Main low loss voltag, the unit is 0.1 volts."
|
|
::= { matStsEntry 21 }
|
|
matStsInvHighLossVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Inverter high loss voltage, the unit is 0.1 volts."
|
|
::= { matStsEntry 22 }
|
|
matStsInvLosLossVoltage OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Inverter low loss voltage, the unit is 0.1 volts."
|
|
::= { matStsEntry 23 }
|
|
-- ========================================================================
|
|
-- matDryContact
|
|
-- ========================================================================
|
|
matDryContactNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of dry contact."
|
|
::= { matDryContact 1 }
|
|
matDryContactTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MATDryContactEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "This table list dry contact message."
|
|
::= { matDryContact 2 }
|
|
matDryContactEntry OBJECT-TYPE
|
|
SYNTAX MATDryContactEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry containing information of one dry contact."
|
|
INDEX { matDryContactIndex }
|
|
::= { matDryContactTable 1 }
|
|
MATDryContactEntry::= SEQUENCE {
|
|
matDryContactIndex PositiveInteger,
|
|
matDryContactString DisplayString
|
|
}
|
|
matDryContactIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The index of dry contact."
|
|
::= { matDryContactEntry 1 }
|
|
matDryContactString OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 29 ) )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "format: xx xx xx xx xx xx xx xx xx xx,
|
|
xx: alarm code. If the configured alarm is less than 10, then fill the position with '--' to instead 'xx'.
|
|
Alarm code:
|
|
Inverter fault 0x01(for 3.5Kva system and 1.5Kva system),
|
|
Inverter over load 0x02(for 3.5Kva system and 1.5Kva system),
|
|
Inverter fan fault 0x03(for 3.5Kva system and 1.5Kva system),
|
|
Inverter power limit 0x04(for 3.5Kva system and 1.5Kva system),
|
|
Inverter DC input Abnormal 0x05(for 3.5Kva system and 1.5Kva system),
|
|
Inverter low volt off 0x06(for 3.5Kva system and 1.5Kva system),
|
|
Inverter lost 0x07(for 3.5Kva system and 1.5Kva system),
|
|
Inverter Mains unavailable 0x19(for 3.5Kva system),
|
|
Inverter Maintenance Bypass 0x1A(for 3.5Kva system),
|
|
Inverter Output 0x1B(for 3.5Kva system),
|
|
STS Inv unavailable 0x2A(for 1.5Kva system),
|
|
STS Main unavailable 0x2B(for 1.5Kva system),
|
|
STS Output overload 0x2C(for 1.5Kva system),
|
|
STS OP Short circuit 0x2D(for 1.5Kva system),
|
|
STS K1 Relay open 0x23(for 1.5Kva system),
|
|
STS SCR1 short 0x24(for 1.5Kva system),
|
|
STS SCR2 short 0x25(for 1.5Kva system),
|
|
STS INV Bypass Mode 0x2F(for 1.5Kva system),
|
|
STS Over temperature 0x30(for 1.5Kva system),
|
|
STS MBS Abnormal 0x31(for 1.5Kva system),
|
|
STS Fan Lock 0x27(for 1.5Kva system),
|
|
STS Fault Mode 0x26(for 1.5Kva system),
|
|
STS Eeprom Fault 0x28(for 1.5Kva system),
|
|
SPS Power Fail 0x32(for 1.5Kva system),
|
|
STS Output abnormal 0x34(for 1.5Kva system),
|
|
STS Maintenance Bypass 0x35(for 1.5Kva system),
|
|
STS Output 0x36(for 1.5Kva system),
|
|
Controller temperature high 0x42(for 3.5Kva system and 1.5Kva system),
|
|
Controller eeprom fail 0x43(for 3.5Kva system and 1.5Kva system),
|
|
Controller CAN Bus Off 0x45(for 3.5Kva system and 1.5Kva system)"
|
|
::= { matDryContactEntry 2 }
|
|
-- ========================================================================
|
|
-- matConfig
|
|
-- ========================================================================
|
|
matConfInvSysOutputFreq OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter system output frequency, can be 500 or 600, the unit is 0.1 Hz."
|
|
::= { matConfig 1 }
|
|
matConfInvSysOutputVolt OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter system output voltage, can be 1100, 1150,1200,2080,2200,2300,2400.
|
|
The unit is 0.1 Volt."
|
|
::= { matConfig 2 }
|
|
matConfInvSysOutputVoltHighLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Output voltage high loss of Inverter System, the unit is 0.1 Volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
1100 1170-1270,
|
|
1150 1220-1320,
|
|
1200 1270-1380,
|
|
2080 2200-2400,
|
|
2200 2330-2520,
|
|
2300 2440-2640,
|
|
2400 2540-2760"
|
|
::= { matConfig 3 }
|
|
matConfInvSysOutputVoltLowLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Voltage Low Loss of inverter System, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
1100 890-1050,
|
|
1150 930-1100,
|
|
1200 1000-1140,
|
|
2080 1760-1980,
|
|
2200 1760-2090,
|
|
2300 1850-2180,
|
|
2400 1930-2280"
|
|
::= { matConfig 4 }
|
|
matConfInvSysInputVolt OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter System Input Voltage, the unit is 0.1 Volt.
|
|
This value depends on matConfInvInputVoltage:
|
|
matConfInvInputVoltage(0.1V)=480: Range(400-440),
|
|
matConfInvInputVoltage(0.1V)=600: Range(500-550)"
|
|
::= { matConfig 5 }
|
|
matConfInvSysPowerLimit OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter System Power Limited level, format: xxx, range: 50 to 100, the unit is percent."
|
|
::= { matConfig 6 }
|
|
matConfInvSysLineVoltHighLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "High loss for line voltage of 3.5k inverter module, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
2080 2180-2650,
|
|
2200 2300-2650,
|
|
2300 2400-2650,
|
|
2400 2500-2650"
|
|
::= { matConfig 7 }
|
|
matConfInvSysLineVoltLowLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Low loss for line voltage of 3.5k inverter module, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
2080 1850-1980,
|
|
2200 1850-2100,
|
|
2300 1850-2200,
|
|
2400 1850-2300"
|
|
::= { matConfig 8 }
|
|
matConfInvSysPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
batteryMode(1),
|
|
lineMode(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Priority for 3.5K inverter module."
|
|
::= { matConfig 9 }
|
|
matConfInvSysFanSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
normalSpeed(1),
|
|
fullSpeed(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Inverter System fan speed."
|
|
::= { matConfig 10 }
|
|
matConfStsAcVoltHighLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Module AC Voltage High Loss Volt, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
1100 1170-1270,
|
|
1150 1220-1320,
|
|
1200 1270-1380,
|
|
2080 2200-2400,
|
|
2200 2330-2520,
|
|
2300 2440-2640,
|
|
2400 2540-2760"
|
|
::= { matConfig 11 }
|
|
matConfStsAcVoltLowLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "STS Module AC Voltage Low Loss Volt, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
1100 890-1050,
|
|
1150 930-1100,
|
|
1200 1000-1140,
|
|
2080 1760-1980,
|
|
2200 1760-2090,
|
|
2300 1850-2180,
|
|
2400 1930-2280"
|
|
::= { matConfig 12 }
|
|
matConfStsIpvVoltHighLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "STS module Inverter IPV High Loss Volt, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
1100 1170-1270,
|
|
1150 1220-1320,
|
|
1200 1270-1380,
|
|
2080 2200-2400,
|
|
2200 2330-2520,
|
|
2300 2440-2640,
|
|
2400 2540-2760"
|
|
::= { matConfig 13 }
|
|
matConfStsIpvVoltLowLoss OBJECT-TYPE
|
|
SYNTAX NonNegativeInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "STS module Inverter IPV low Loss Volt, the unit is 0.1 volt.
|
|
This value depends on matConfInvSysOutputVolt, the least significant
|
|
digit must be zero, see table:
|
|
matConfInvSysOutputVolt(0.1V) Range(0.1V)
|
|
1100 890-1050,
|
|
1150 930-1100,
|
|
1200 1000-1140,
|
|
2080 1760-1980,
|
|
2200 1760-2090,
|
|
2300 1850-2180,
|
|
2400 1930-2280"
|
|
::= { matConfig 14 }
|
|
matConfStsPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
onLine(1),
|
|
offLine(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "STS output priority."
|
|
::= { matConfig 15 }
|
|
matConfStsFanSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- add 1 compare with Q1(0-1) command
|
|
normalSpeed(1),
|
|
fullSpeed(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "STS fan speed."
|
|
::= { matConfig 16 }
|
|
--========================================================================
|
|
-- matTrapTargets
|
|
--========================================================================
|
|
matTrapTargetsNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of trap targets."
|
|
::= { matTrapTargets 1 }
|
|
matTrapTargetsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MatTrapTargetsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "This table list the managers'IP to send traps to."
|
|
::= { matTrapTargets 2 }
|
|
matTrapTargetsEntry OBJECT-TYPE
|
|
SYNTAX MatTrapTargetsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry containing information of one trap target."
|
|
INDEX { matTrapTargetsIndex }
|
|
::= { matTrapTargetsTable 1 }
|
|
MatTrapTargetsEntry ::= SEQUENCE {
|
|
matTrapTargetsIndex PositiveInteger,
|
|
matTrapTargetsAddress DisplayString,
|
|
matTrapTargetsCommunity DisplayString,
|
|
matTrapType INTEGER,
|
|
matTrapSeverityLevel INTEGER,
|
|
matTrapTargetsDesc DisplayString
|
|
}
|
|
matTrapTargetsIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The index to a trap receiver entry"
|
|
::= { matTrapTargetsEntry 1 }
|
|
matTrapTargetsAddress OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 45 ) )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address of the manager to send a trap to."
|
|
::= { matTrapTargetsEntry 2 }
|
|
matTrapTargetsCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 31 ) )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The community name to use in the trap when
|
|
sent to the manager."
|
|
::= { matTrapTargetsEntry 3 }
|
|
matTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER { none ( 1 ) , matTrap ( 2 ) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of trap to be received by the manager."
|
|
::= { matTrapTargetsEntry 4 }
|
|
matTrapSeverityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER { observe ( 1 ) , major ( 2 ) , critical ( 3 ) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The severity level of traps to be received by this manager."
|
|
::= { matTrapTargetsEntry 5 }
|
|
matTrapTargetsDesc OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 31 ) )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Description of trap receivers"
|
|
::= { matTrapTargetsEntry 6 }
|
|
-- ===========================================================================
|
|
-- matTraps
|
|
-- Level: Critical, Major, Observe
|
|
-- ===========================================================================
|
|
matInvFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter fault."
|
|
::= 1
|
|
matReturnFromInvFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter fault."
|
|
::= 2
|
|
matInvOverLoad TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter Over-loading."
|
|
::= 3
|
|
matReturnFromInvOverLoad TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Over-loading."
|
|
::= 4
|
|
matInvFanFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter Fan fault."
|
|
::= 5
|
|
matReturnFromInvFanFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Fan fault."
|
|
::= 6
|
|
matInvTempPowerLimit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter power limit."
|
|
::= 7
|
|
matReturnFromInvTempPowerLimit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter power limit."
|
|
::= 8
|
|
matInvInputAbnormal TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter input abnormal."
|
|
::= 9
|
|
matReturnFromInvInputAbnormal TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVEReturn from Inverter input abnormal."
|
|
::= 10
|
|
matInvLowInputShutdown TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter shut down due to low input voltage."
|
|
::= 11
|
|
matReturnFromInvLowInputShutdown TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter shut down due to low input voltage."
|
|
::= 12
|
|
matInvNotRespond TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter disconnected."
|
|
::= 13
|
|
matReturnFromInvNotRespond TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Inverter connected."
|
|
::= 14
|
|
matInvBusVoltageOverLimit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Bus voltage over the maximal level."
|
|
::= 15
|
|
matReturnFromInvBusVoltOverLimit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Bus voltage over the maximal level."
|
|
::= 16
|
|
matInvBusVoltageUnderLimit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Bus volt under the minimal level."
|
|
::= 17
|
|
matReturnFromInvBusVoltUnderLimit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Bus volt under the minimal level."
|
|
::= 18
|
|
matInvBusSoftFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Bus Soft Start Fail."
|
|
::= 19
|
|
matReturnFromInvBusSoftFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Bus Soft Start Fail."
|
|
::= 20
|
|
matInvOutputShort TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Output Short."
|
|
::= 21
|
|
matReturnFromInvOutputShort TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Output Short."
|
|
::= 22
|
|
matInvOutputVoltLow TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter output voltage low."
|
|
::= 23
|
|
matReturnFromInvOutputVoltLow TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter output voltage low."
|
|
::= 24
|
|
matInvOutputVoltHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter output voltage high."
|
|
::= 25
|
|
matReturnFromInvOutputVoltHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter output voltage high."
|
|
::= 26
|
|
matInvTemperatureHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Temperature High."
|
|
::= 27
|
|
matReturnFromInvTemperatureHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Temperature High."
|
|
::= 28
|
|
matInvNegativePowerProtect TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter negative power protection."
|
|
::= 29
|
|
matReturnFromInvNegativePowerProtect TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter negative power protection."
|
|
::= 30
|
|
matInvPulseFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Sync Pulse Fault."
|
|
::= 31
|
|
matReturnFromInvPulseFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
DESCRIPTION "OBSERVE: Return from Inverter Sync Pulse Fault."
|
|
::= 32
|
|
matInvEPOShutdown TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter EPO shutdown."
|
|
::= 33
|
|
matReturnFromInvEPOShutdown TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter EPO shutdown."
|
|
::= 34
|
|
matInvSoftStartFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter soft start fail."
|
|
::= 35
|
|
matReturnFromInvSoftStartFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter soft start fail."
|
|
::= 36
|
|
matInvEEPROMFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter EEPROM fault."
|
|
::= 37
|
|
matReturnFromInvEEPROMFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter EEPROM fault."
|
|
::= 38
|
|
matInvBypassSCRShort TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Bypass SCR Short."
|
|
::= 39
|
|
matReturnFromInvBypassSCRShort TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Bypass SCR Short."
|
|
::= 40
|
|
matInvMBSPosError TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter MBS Position Error."
|
|
::= 41
|
|
matReturnFromInvMBSPosError TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter MBS Position Error."
|
|
::= 42
|
|
matInvBackfeedRelayOpen TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Backfeed Relay Open."
|
|
::= 43
|
|
matReturnFromInvBackfeedRelayOpen TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Backfeed Relay Open."
|
|
::= 44
|
|
matInvHardwareError TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Inverter Hardware Detection Error."
|
|
::= 45
|
|
matReturnFromInvHardwareError TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Hardware Detection Error."
|
|
::= 46
|
|
matInvMainUnavailable TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter Mains Unavailable."
|
|
::= 47
|
|
matReturnFromInvMainUnavailable TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Mains Unavailable."
|
|
::= 48
|
|
matInvMaintenaceBypass TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Inverter Maintenance Bypass."
|
|
::= 49
|
|
matReturnFromInvMaintenaceBypass TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matInvSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Inverter Maintenance Bypass."
|
|
::= 50
|
|
-- STS trap
|
|
matStsBypassUnavailable TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Bypass unavailable."
|
|
::= 51
|
|
matReturnFromStsBypassUnavailable TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Bypass unavailable."
|
|
::= 52
|
|
matStsBackfeedRelayOpen TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Back-feed relay open."
|
|
::= 53
|
|
matReturnFromStsBackfeedRelayOpen TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Back-feed relay open."
|
|
::= 54
|
|
matStsScr1ShortCurcuit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS SCR1 short circuit."
|
|
::= 55
|
|
matReturnFromStsScr1ShortCurcuit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS SCR1 short circuit."
|
|
::= 56
|
|
matStsScr2ShortCurcuit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS SCR2 short circuit."
|
|
::= 57
|
|
matReturnFromStsScr2ShortCurcuit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS SCR2 short circuit."
|
|
::= 58
|
|
matStsFaultMode TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS running in fault mode."
|
|
::= 59
|
|
matReturnFromStsFaultMode TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS running in fault mode."
|
|
::= 60
|
|
matStsFanFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS fan fault."
|
|
::= 61
|
|
matReturnFromStsFanFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS fan fault."
|
|
::= 62
|
|
matStsEEPROMFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS EEPROM fault."
|
|
::= 63
|
|
matReturnFromStsEEPROMFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS EEPROM fault."
|
|
::= 64
|
|
matStsInvFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Inverter unavailable."
|
|
::= 65
|
|
matReturnFromStsInvFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Inverter unavailable."
|
|
::= 66
|
|
matStsMainsFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Mains unavailable."
|
|
::= 67
|
|
matReturnFromStsMainFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Mains unavailable."
|
|
::= 68
|
|
matStsOverLoad TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Output over load."
|
|
::= 69
|
|
matReturnFromStsOverLoad TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Output over load."
|
|
::= 70
|
|
matStsOutputShortCircuit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS Output short circuit."
|
|
::= 71
|
|
matReturnFromStsOutputShortCircuit TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Output short circuit."
|
|
::= 72
|
|
matStsInvBypassMode TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS Inverter bypass mode."
|
|
::= 73
|
|
matReturnFromStsInvBypassMode TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Inverter bypass mode."
|
|
::= 74
|
|
matStsTemperatureHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS temperature high."
|
|
::= 75
|
|
matReturnFromStsTemperatureHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS temperature high."
|
|
::= 76
|
|
matStsMBSPosFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS MBS in abnormal position."
|
|
::= 77
|
|
matReturnFromStsMBSPosFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS MBS in abnormal position."
|
|
::= 78
|
|
matStsControlPowerFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS Control power fail."
|
|
::= 79
|
|
matReturnFromStsControlPowerFail TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Control power fail."
|
|
::= 80
|
|
matStsNotRespond TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: STS disconnected."
|
|
::= 81
|
|
matReturnFromStsNotRespond TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: STS connected."
|
|
::= 82
|
|
matStsOutputAbnormal TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Output abnormal."
|
|
::= 83
|
|
matReturnFromStsOutputAbnormal TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Output abnormal."
|
|
::= 84
|
|
matStsMaintenanceBypass TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: STS Maintenance Bypass."
|
|
::= 85
|
|
matReturnFromStsMaintenanceBypass TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matStsSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from STS Maintenance Bypass."
|
|
::= 86
|
|
-- control warning
|
|
matConBatteryLow TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Controller Battery Low."
|
|
::= 87
|
|
matReturnFromConBatteryLow TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Controller Battery Low."
|
|
::= 88
|
|
matConTemperatureHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Controller temperature High."
|
|
::= 89
|
|
matReturnFromConTemperatureHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Controller temperature High."
|
|
::= 90
|
|
matConEEPROMFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "MAJOR: Controller EEPROM fault."
|
|
::= 91
|
|
matReturnFromConEEPROMFault TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Controller EEPROM fault."
|
|
::= 92
|
|
matConBatteryVoltHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Controller Battery voltage high."
|
|
::= 93
|
|
matReturnFromConBatteryVoltHigh TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Controller Battery voltage high."
|
|
::= 94
|
|
matConCanBusOff TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Controller CAN bus off."
|
|
::= 95
|
|
matReturnFromConCanBusOff TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Controller CAN bus off."
|
|
::= 96
|
|
matConCommunicationLost TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "CRITICAL: Controller communication lost."
|
|
::= 97
|
|
matReturnFromCommunicationLost TRAP-TYPE
|
|
ENTERPRISE matTraps
|
|
VARIABLES {
|
|
matConSerialNum
|
|
}
|
|
DESCRIPTION "OBSERVE: Return from Controller communication lost."
|
|
::= 98
|
|
END
|
|
|
|
|
|
|