mibs/MIBS/edgecos/ECS2100-MIB
2023-12-05 12:25:34 +01:00

17084 lines
641 KiB
Plaintext
Raw Blame History

ECS2100-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32,Counter64, IpAddress,
NOTIFICATION-TYPE, enterprises, TimeTicks
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress
FROM SNMPv2-TC
PortList, VlanIndex, VlanId, dot1qVlanStaticEntry
FROM Q-BRIDGE-MIB
InetAddressType, InetAddress, InetAddressIPv6
FROM INET-ADDRESS-MIB
InterfaceIndex, ifIndex, ifOperStatus
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
BridgeId, Timeout, dot1dStpPort,dot1dStpPortEntry
FROM BRIDGE-MIB
pethPsePortEntry, pethMainPseEntry
FROM POWER-ETHERNET-MIB
Dot1agCfmMepId, dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, dot1agCfmMepIdentifier, dot1agCfmMepDbRMepIdentifier
FROM IEEE8021-CFM-MIB
dot1vProtocolPortEntry
FROM Q-BRIDGE-MIB
dot1xAuthConfigEntry
FROM IEEE8021-PAE-MIB;
accton OBJECT IDENTIFIER ::= { enterprises 259 }
edgecoreNetworks OBJECT IDENTIFIER ::= { accton 10 }
edgecoreNetworksMgt OBJECT IDENTIFIER ::= { edgecoreNetworks 1 }
ecs2100-28ppMIB MODULE-IDENTITY
LAST-UPDATED "201508270000Z"
ORGANIZATION "Edgecore Networks, Inc."
CONTACT-INFO
"Edgecore Networks, Inc.
Customer Service
Postal: No. 1 Creation Rd. III,
Science-based Industrial Park,
Hsinchu 300-77, Taiwan, R.O.C.
Tel: +886-3-5770270
Fax: +886-3-5780764
E-mail: brandsupport@edge-core.com
company website:www.edge-core.com
technical support:brandsupport@edge-core.com
"
DESCRIPTION
"The MIB module for ECS2100 series"
REVISION "201508270000Z"
DESCRIPTION
"Initial version of this MIB."
::= { edgecoreNetworksMgt 43 }
ecs2100-28ppMIBObjects OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 1 }
ecs2100-28ppNotifications OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 2 }
-- supported groups
switchMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 1 }
portMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 2 }
trunkMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 3 }
lacpMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 4 }
staMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 5 }
restartMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 7 }
mirrorMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 8 }
igmpSnoopMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 9 }
ipMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 10 }
vlanMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 12 }
priorityMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 13 }
trapDestMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 14 }
qosMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 16 }
securityMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 17 }
sysLogMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 19 }
lineMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 20 }
sysTimeMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 23 }
fileMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 24 }
poeMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 28 }
stormMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 33 }
sysResourceMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 39 }
mvrMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 44 }
dhcpSnoopMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 46 }
ipSrcGuardMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 48 }
mldSnoopMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 54 }
dynamicArpInspectionMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 56 }
timeRangeMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 61 }
lbdMgt OBJECT IDENTIFIER ::= { ecs2100-28ppMIBObjects 63 }
--
-- Product sysObjectID values
--
ecs2100-10t OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 101 }
ecs2100-10pe OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 102 }
ecs2100-10p OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 103 }
ecs2100-28t OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 104 }
ecs2100-28p OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 105 }
ecs2100-28pp OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 106 }
ecs2100-52t OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 107 }
ecs2110-26t OBJECT IDENTIFIER ::= { ecs2100-28ppMIB 108 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
KeySegment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The total length of the key is 1024 characters,
it is divided into 8 parts and stored in 8 separated mib
variables as below:
Key1: part 1 of the key (1-128)
Key2: part 2 of the key (129-256)
Key3: part 3 of the key (257-384)
Key4: part 4 of the key (385-512)
Key5: part 5 of the key (513-640)
Key6: part 6 of the key (641-768)
Key7: part 7 of the key (769-896)
Key8: part 8 of the key (897-1024)
Please note that if the key string is less then 1024 characters,
the remaining part of the string will be filled by a zero-length string.
For example, if the length of the key is 129,
we will get a string of length 128 in Key1, and
a string of length 1 in Key2,
moreover, Key3 to Key8 will all be zero-length strings."
SYNTAX OCTET STRING(SIZE(0..128))
ValidStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two values. Setting it to valid(1) creates an entry.
Setting it to invalid(2) destroys an entry."
SYNTAX INTEGER { valid(1), invalid(2) }
StaPathCostMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The path cost mode of a spanning tree algorithm, short(1) indicates
that we retrieve/configure the spanning tree path cost as a 16 bit
value and long(2) indicates that we retrieve/configure the spanning
tree path cost as a 32 bit value."
SYNTAX INTEGER { short(1), long(2) }
--
-- switchMgt
--
-- Management for the switch system, or individual units
-- in a stackable switch system. For a non-stackable system,
-- only unit 1 exists.
switchNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of switches present on this system."
::= { switchMgt 2 }
switchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
the switch units in this system."
::= { switchMgt 3 }
switchInfoEntry OBJECT-TYPE
SYNTAX SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing descriptions and status information for
switch units."
INDEX { swUnitIndex }
::= { switchInfoTable 1 }
SwitchInfoEntry ::= SEQUENCE
{
swUnitIndex Integer32,
swHardwareVer DisplayString,
swMicrocodeVer DisplayString,
swLoaderVer DisplayString,
swBootRomVer DisplayString,
swOpCodeVer DisplayString,
swPortNumber Integer32,
swPowerStatus INTEGER,
swRoleInSystem INTEGER,
swSerialNumber DisplayString,
swServiceTag DisplayString,
swModelNumber DisplayString,
swEpldVer DisplayString
}
swUnitIndex OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchInfoEntry 1 }
swHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the main board."
::= { switchInfoEntry 2 }
swMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the main board."
::= { switchInfoEntry 3 }
swLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the main board."
::= { switchInfoEntry 4 }
swBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the main board."
::= { switchInfoEntry 5 }
swOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the main board."
::= { switchInfoEntry 6 }
swPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports on this switch."
::= { switchInfoEntry 7 }
swPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
redundantPower(2),
internalAndRedundantPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch using internalPower(1),
redundantPower(2) or both(3)"
::= { switchInfoEntry 8 }
swRoleInSystem OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
backupMaster(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system."
::= { switchInfoEntry 9 }
swSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the switch."
::= { switchInfoEntry 10 }
swServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service tag serial-number of the switch."
::= { switchInfoEntry 13 }
swModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model number of the switch."
::= { switchInfoEntry 14 }
swEpldVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The EPLD version of the switch."
::= { switchInfoEntry 15 }
switchOperState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unknown(2),
ok(3),
noncritical(4),
critical(5),
nonrecoverable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global operation state of the switch."
::= { switchMgt 4 }
switchProductId OBJECT IDENTIFIER ::= { switchMgt 5 }
swProdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product name of this switch."
::= { switchProductId 1 }
swProdManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product manufacturer of this switch."
::= { switchProductId 2 }
swProdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product description of this switch."
::= { switchProductId 3 }
swProdVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The runtime code version of this switch."
::= { switchProductId 4 }
swProdUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The URL of this switch, which we can connect through
a web browser."
::= { switchProductId 5 }
swIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A unique identifier of which switch in the chassis is currently
being looked at."
::= { switchProductId 6 }
swChassisServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The service tag of the chassis this switch resides in."
::= { switchProductId 7 }
switchIndivPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual powers."
::= { switchMgt 6 }
switchIndivPowerEntry OBJECT-TYPE
SYNTAX SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual power."
INDEX { swIndivPowerUnitIndex, swIndivPowerIndex }
::= { switchIndivPowerTable 1 }
SwitchIndivPowerEntry ::= SEQUENCE
{
swIndivPowerUnitIndex Integer32,
swIndivPowerIndex INTEGER,
swIndivPowerStatus INTEGER
}
swIndivPowerUnitIndex OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This is defined as swUnitIndex."
::= { switchIndivPowerEntry 1 }
swIndivPowerIndex OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
externalPower(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "1 means internal power, 2 means external power."
::= { switchIndivPowerEntry 2 }
swIndivPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
green(2),
red(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "notPresent(1) means not present, green(2) means
up, red(3) means down."
::= { switchIndivPowerEntry 3 }
switchJumboFrameStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable(1) means the Jumbo Frame has enabled, disabled(2)
means the Jumbo Frame has disabled."
::= { switchMgt 7 }
amtrMgt OBJECT IDENTIFIER ::= { switchMgt 8 }
-- Address Management
amtrMacAddrAgingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), the MAC address table will age out according to
its timer. If this is disabled(2), the MAC address table will not
age out."
::= { amtrMgt 3 }
--
-- portMgt
--
-- Management ports. This group also provides information
-- related to trunks because they share the same properties.
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk."
::= { portMgt 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, describing the configuration of
one switch port or trunk."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::= SEQUENCE
{
portIndex InterfaceIndex,
portName DisplayString,
portType INTEGER,
portSpeedDpxCfg INTEGER,
portFlowCtrlCfg INTEGER,
portCapabilities BITS,
portAutonegotiation EnabledStatus,
portSpeedDpxStatus INTEGER,
portFlowCtrlStatus INTEGER,
portTrunkIndex Integer32,
portComboForcedMode INTEGER,
portMasterSlaveModeCfg INTEGER,
portMacAddrLearningStatus EnabledStatus,
portMacAddrLearningCount Counter32,
portUpTime TimeTicks,
portShutdownReason BITS
}
portIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portEntry 1 }
portName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later)."
::= { portEntry 2 }
portType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hundredBaseTX(2),
hundredBaseFX(3),
thousandBaseSX(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
thousandBaseSfp(8),
hundredBaseFxScSingleMode(9),
hundredBaseFxScMultiMode(10),
thousandBaseCX(11),
tenG(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port type of the configuration of the switch."
::= { portEntry 3 }
portSpeedDpxCfg OBJECT-TYPE
SYNTAX INTEGER
{
reserved(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."
DEFVAL { halfDuplex10 }
::= { portEntry 4 }
portFlowCtrlCfg OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
tx(5),
rx(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(5) Flow control mechanism is enabled with tx pause
mechanism only.
(6) Flow control mechansim is enabled with rx pause
mechansim only.
Fast ethernet ports can be set as:
enabled(1),
disabled(2).
Gigabit ethernet ports can be set as:
enabled(1),
disabled(2),
tx(5),
rx(6).
The actual flow control mechanism is used given by
portFlowCtrlStatus."
DEFVAL { disabled }
::= { portEntry 5 }
portCapabilities OBJECT-TYPE
SYNTAX BITS
{
portCap10half(0),
portCap10full(1),
portCap100half(2),
portCap100full(3),
portCap1000half(4),
portCap1000full(5),
portCap10gHalf(6),
portCap10gFull(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
portCapSym(14),
portCapFlowCtrl(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port or trunk capabilities."
::= { portEntry 6 }
portAutonegotiation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether auto-negotiation is enabled."
::= { portEntry 7 }
portSpeedDpxStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case the value is error(1)."
::= { portEntry 8 }
portFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
backPressure(2),
dot3xFlowControl(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently configured then this value
is error(1)."
::= { portEntry 9 }
portTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding trunkPorts."
::= { portEntry 10 }
portComboForcedMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
reserved2(2),
reserved3(3),
sfpForced(4),
reserved5(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal to none(1), and setting this variable to none(1) is
not allowed. sfpForced(4) is set if user want to force
this port running in fiber mode."
::= { portEntry 12}
portMasterSlaveModeCfg OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
slave(2),
auto(3),
autoPreferMaster(4),
autoPreferSlave(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the PHY mode when auto negotiation is disabled and
speed-duplex is 1000full for giga copper port."
::= { portEntry 15 }
portMacAddrLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to start to learn MAC
addresses. Set this variable to disabled(2) to stop to
learn MAC addresses."
DEFVAL { enabled }
::= { portEntry 17 }
portMacAddrLearningCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of learned MAC addresses."
::= { portEntry 18 }
portUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port up time (in hundredths of a second)."
::= { portEntry 19 }
portShutdownReason OBJECT-TYPE
SYNTAX BITS
{
admin(0),
stpLbd(1),
stpBpduGuard(2),
networkAccessPortLinkDetection(3),
networkAccessPortDynamicQos(4),
portSec(5),
lbd(6),
atcBstorm(7),
atcMstorm(8),
udld(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The reason of port shutdown. The value is 0 if no
shutdown action is applied to this port."
::= { portEntry 20 }
--
-- cable diagnostics
--
cableDiagMgt OBJECT IDENTIFIER ::= { portMgt 3 }
cableDiagCtlAction OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To execute cable diagnostics on a port, assign
cableDiagCtlAction to the value of ifIndex defined
by the ifIndex in the IF-MIB. When read, this object
always returns 0."
::= { cableDiagMgt 1 }
cableDiagResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CableDiagResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for cable diagnostics result."
::= { cableDiagMgt 2 }
cableDiagResultEntry OBJECT-TYPE
SYNTAX CableDiagResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cable diagnostics result."
INDEX { cableDiagResultIfIndex }
::= { cableDiagResultTable 1 }
CableDiagResultEntry ::= SEQUENCE
{
cableDiagResultIfIndex InterfaceIndex,
cableDiagResultStatusPairA INTEGER,
cableDiagResultStatusPairB INTEGER,
cableDiagResultStatusPairC INTEGER,
cableDiagResultStatusPairD INTEGER,
cableDiagResultDistancePairA Integer32,
cableDiagResultDistancePairB Integer32,
cableDiagResultDistancePairC Integer32,
cableDiagResultDistancePairD Integer32,
cableDiagResultTime DisplayString
}
cableDiagResultIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as the ifIndex."
::= { cableDiagResultEntry 1 }
cableDiagResultStatusPairA OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
short(4),
impedanceMismatch(8),
failed(9),
notSupported(10),
noCable(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable."
::= { cableDiagResultEntry 2 }
cableDiagResultStatusPairB OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
short(4),
impedanceMismatch(8),
failed(9),
notSupported(10),
noCable(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable."
::= { cableDiagResultEntry 3 }
cableDiagResultStatusPairC OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
short(4),
impedanceMismatch(8),
failed(9),
notSupported(10),
noCable(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable."
::= { cableDiagResultEntry 4 }
cableDiagResultStatusPairD OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
short(4),
impedanceMismatch(8),
failed(9),
notSupported(10),
noCable(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable."
::= { cableDiagResultEntry 5 }
cableDiagResultDistancePairA OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair A of the cable
in meters."
::= { cableDiagResultEntry 6 }
cableDiagResultDistancePairB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair B of the cable
in meters."
::= { cableDiagResultEntry 7 }
cableDiagResultDistancePairC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair C of the cable
in meters."
::= { cableDiagResultEntry 8 }
cableDiagResultDistancePairD OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair D of the cable
in meters."
::= { cableDiagResultEntry 9 }
cableDiagResultTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the last time of cable diagnostics.
For example, 'Jan 1 02:03:04 2002'."
::= { cableDiagResultEntry 11 }
portUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dispalys port utilization during recent 300 seconds."
::= { portMgt 6 }
portUtilEntry OBJECT-TYPE
SYNTAX PortUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dispalys port utilization during recent 300 seconds."
INDEX { portUtilIfIndex }
::= { portUtilTable 1 }
PortUtilEntry ::= SEQUENCE
{
portUtilIfIndex InterfaceIndex,
portInOctetRate Counter64,
portInPacketRate Counter64,
portInUtil Integer32,
portOutOctetRate Counter64,
portOutPacketRate Counter64,
portOutUtil Integer32
}
portUtilIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk interface of the portUtilTable.
The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB."
::= { portUtilEntry 1 }
portInOctetRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input octet rate (kbits/sec) of the port."
::= { portUtilEntry 2 }
portInPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input packet rate (pkts/sec) of the port."
::= { portUtilEntry 3 }
portInUtil OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input utilization of the port, in one per
hundred."
::= { portUtilEntry 4 }
portOutOctetRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The output octet rate (kbits/sec) of the port."
::= { portUtilEntry 5 }
portOutPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The output packet rate (pkts/sec) of the port."
::= { portUtilEntry 6 }
portOutUtil OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The output utilization of the port, in one per
hundred."
::= { portUtilEntry 7 }
--
-- portHist
--
portHist OBJECT IDENTIFIER ::= { portMgt 8 }
portHistControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortHistControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of history control entries."
::= { portHist 1 }
portHistControlEntry OBJECT-TYPE
SYNTAX PortHistControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic sampling of
statistics."
INDEX { portHistControlIndex }
::= { portHistControlTable 1 }
PortHistControlEntry ::= SEQUENCE {
portHistControlIndex Integer32,
portHistControlName DisplayString,
portHistControlDataSource InterfaceIndex,
portHistControlInterval Integer32,
portHistControlBucketsRequested Integer32,
portHistControlBucketsGranted Integer32,
portHistControlStatus RowStatus
}
portHistControlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
portHistControl table."
::= { portHistControlEntry 1 }
portHistControlName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual name of the entity. It is mandatory that
this only contain printable ASCII characters."
::= { portHistControlEntry 2 }
portHistControlDataSource OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
portHistControlEntry. This source can be any
interface on this device."
::= { portHistControlEntry 3 }
portHistControlInterval OBJECT-TYPE
SYNTAX Integer32 (1..86400)
UNITS "Minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
portHistControlEntry. This interval can
be set to any number of seconds between 1 and
86400 (1 day)."
DEFVAL { 1 }
::= { portHistControlEntry 4 }
portHistControlBucketsRequested OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
portHistControlEntry."
DEFVAL { 1 }
::= { portHistControlEntry 5 }
portHistControlBucketsGranted OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
portHistControlEntry."
::= { portHistControlEntry 6 }
portHistControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this portHistControl entry."
::= { portHistControlEntry 7 }
portHistCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortHistCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet history entries."
::= { portHist 2 }
portHistCurrentEntry OBJECT-TYPE
SYNTAX PortHistCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
portHistControlEntry which set up the parameters for
a regular collection of these samples."
INDEX { portHistCurrentIndex }
::= { portHistCurrentTable 1 }
PortHistCurrentEntry ::= SEQUENCE {
portHistCurrentIndex Integer32,
portHistCurrentSampleIndex Integer32,
portHistCurrentIntervalStart TimeTicks,
portHistCurrentInOctets Counter64,
portHistCurrentInUcastPkts Counter64,
portHistCurrentInMulticastPkts Counter64,
portHistCurrentInBroadcastPkts Counter64,
portHistCurrentInDiscards Counter64,
portHistCurrentInErrors Counter64,
portHistCurrentInUnknownProtos Counter64,
portHistCurrentOutOctets Counter64,
portHistCurrentOutUcastPkts Counter64,
portHistCurrentOutMulticastPkts Counter64,
portHistCurrentOutBroadcastPkts Counter64,
portHistCurrentOutDiscards Counter64,
portHistCurrentOutErrors Counter64,
portHistCurrentInUtilization Integer32,
portHistCurrentOutUtilization Integer32
}
portHistCurrentIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of portHistControlIndex."
::= { portHistCurrentEntry 1 }
portHistCurrentSampleIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same portHistControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { portHistCurrentEntry 2 }
portHistCurrentIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured."
::= { portHistCurrentEntry 3 }
portHistCurrentInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters."
::= { portHistCurrentEntry 4 }
portHistCurrentInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer."
::= { portHistCurrentEntry 5 }
portHistCurrentInMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses."
::= { portHistCurrentEntry 6 }
portHistCurrentInBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer."
::= { portHistCurrentEntry 7 }
portHistCurrentInDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space."
::= { portHistCurrentEntry 8 }
portHistCurrentInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portHistCurrentEntry 9 }
portHistCurrentInUnknownProtos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0."
::= { portHistCurrentEntry 10 }
portHistCurrentOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { portHistCurrentEntry 11 }
portHistCurrentOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent."
::= { portHistCurrentEntry 12 }
portHistCurrentOutMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses."
::= { portHistCurrentEntry 13 }
portHistCurrentOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent."
::= { portHistCurrentEntry 14 }
portHistCurrentOutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space."
::= { portHistCurrentEntry 15 }
portHistCurrentOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors."
::= { portHistCurrentEntry 16 }
portHistCurrentInUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent."
::= { portHistCurrentEntry 17 }
portHistCurrentOutUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent."
::= { portHistCurrentEntry 18 }
portHistPreviousTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortHistPreviousEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet history entries."
::= { portHist 3 }
portHistPreviousEntry OBJECT-TYPE
SYNTAX PortHistPreviousEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
portHistControlEntry which set up the parameters for
a regular collection of these samples."
INDEX { portHistPreviousIndex , portHistPreviousSampleIndex }
::= { portHistPreviousTable 1 }
PortHistPreviousEntry ::= SEQUENCE {
portHistPreviousIndex Integer32,
portHistPreviousSampleIndex Integer32,
portHistPreviousIntervalStart TimeTicks,
portHistPreviousInOctets Counter64,
portHistPreviousInUcastPkts Counter64,
portHistPreviousInMulticastPkts Counter64,
portHistPreviousInBroadcastPkts Counter64,
portHistPreviousInDiscards Counter64,
portHistPreviousInErrors Counter64,
portHistPreviousInUnknownProtos Counter64,
portHistPreviousOutOctets Counter64,
portHistPreviousOutUcastPkts Counter64,
portHistPreviousOutMulticastPkts Counter64,
portHistPreviousOutBroadcastPkts Counter64,
portHistPreviousOutDiscards Counter64,
portHistPreviousOutErrors Counter64,
portHistPreviousInUtilization Integer32,
portHistPreviousOutUtilization Integer32
}
portHistPreviousIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of portHistControlIndex."
::= { portHistPreviousEntry 1 }
portHistPreviousSampleIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same portHistControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { portHistPreviousEntry 2 }
portHistPreviousIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured."
::= { portHistPreviousEntry 3 }
portHistPreviousInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters."
::= { portHistPreviousEntry 4 }
portHistPreviousInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer."
::= { portHistPreviousEntry 5 }
portHistPreviousInMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses."
::= { portHistPreviousEntry 6 }
portHistPreviousInBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer."
::= { portHistPreviousEntry 7 }
portHistPreviousInDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space."
::= { portHistPreviousEntry 8 }
portHistPreviousInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portHistPreviousEntry 9 }
portHistPreviousInUnknownProtos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0."
::= { portHistPreviousEntry 10 }
portHistPreviousOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { portHistPreviousEntry 11 }
portHistPreviousOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent."
::= { portHistPreviousEntry 12 }
portHistPreviousOutMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses."
::= { portHistPreviousEntry 13 }
portHistPreviousOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent."
::= { portHistPreviousEntry 14 }
portHistPreviousOutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space."
::= { portHistPreviousEntry 15 }
portHistPreviousOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors."
::= { portHistPreviousEntry 16 }
portHistPreviousInUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent."
::= { portHistPreviousEntry 17 }
portHistPreviousOutUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent."
::= { portHistPreviousEntry 18 }
--
-- Show Media Information
-- Information of the media device installed in the physical ports.
--
portMediaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortMediaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table."
::= { portMgt 10 }
portMediaInfoEntry OBJECT-TYPE
SYNTAX PortMediaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table."
INDEX { portMediaInfoIfIndex }
::= { portMediaInfoTable 1 }
PortMediaInfoEntry ::=
SEQUENCE {
portMediaInfoIfIndex
InterfaceIndex,
portMediaInfoConnectorType
DisplayString,
portMediaInfoFiberType
DisplayString,
portMediaInfoEthComplianceCodes
DisplayString,
portMediaInfoBaudRate
DisplayString,
portMediaInfoVendorOUI
DisplayString,
portMediaInfoVendorName
DisplayString,
portMediaInfoPartNumber
DisplayString,
portMediaInfoRevision
DisplayString,
portMediaInfoSerialNumber
DisplayString,
portMediaInfoDateCode
DisplayString
}
portMediaInfoIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ifindex."
::= { portMediaInfoEntry 1 }
portMediaInfoConnectorType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The connector type."
::= { portMediaInfoEntry 2 }
portMediaInfoFiberType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The fiber type."
::= { portMediaInfoEntry 3 }
portMediaInfoEthComplianceCodes OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ethernet compliance codes."
::= { portMediaInfoEntry 4 }
portMediaInfoBaudRate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate."
::= { portMediaInfoEntry 5 }
portMediaInfoVendorOUI OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The OUI of the vendor."
::= { portMediaInfoEntry 6 }
portMediaInfoVendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The media vendor name, full name of the corporation."
::= { portMediaInfoEntry 7 }
portMediaInfoPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The media vendor part number."
::= { portMediaInfoEntry 8 }
portMediaInfoRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The media vendor product version number."
::= { portMediaInfoEntry 9 }
portMediaInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The vendor serial number of the media device."
::= { portMediaInfoEntry 10 }
portMediaInfoDateCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date code of the media device."
::= { portMediaInfoEntry 11 }
-- ifIndex to Optical Parameters Table
-- Given an ifIndex, this table returns the optical parameters for the ifIndex.
portOpticalMonitoringInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOpticalMonitoringInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the instrumented parameters of all
optical interfaces."
REFERENCE "ITU recommendations G.783, G.784, G.953"
::= { portMgt 11 }
portOpticalMonitoringInfoEntry OBJECT-TYPE
SYNTAX PortOpticalMonitoringInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table."
INDEX { portOpticalMonitoringInfoIfIndex }
::= { portOpticalMonitoringInfoTable 1 }
PortOpticalMonitoringInfoEntry ::=
SEQUENCE {
portOpticalMonitoringInfoIfIndex
InterfaceIndex,
portOpticalMonitoringInfoTemperature
DisplayString,
portOpticalMonitoringInfoVcc
DisplayString,
portOpticalMonitoringInfoTxBiasCurrent
DisplayString,
portOpticalMonitoringInfoTxPower
DisplayString,
portOpticalMonitoringInfoRxPower
DisplayString
}
portOpticalMonitoringInfoIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ifindex."
::= { portOpticalMonitoringInfoEntry 1 }
portOpticalMonitoringInfoTemperature OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the transmitter laser
diode temperature for the interface. This object
indicates the health of the transmitter.
The format is xxx.yyyy C(elcius). If the device supports
ALARM WARNING TRAP, then followed by whether the measured
value is normal, high/low alarm or high/low warning."
::= { portOpticalMonitoringInfoEntry 2 }
portOpticalMonitoringInfoVcc OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the Vcc. It is measured
in V. If the device supports ALARM WARNING TRAP, then
followed by whether the measured value is normal,
high/low alarm or high/low warning."
::= { portOpticalMonitoringInfoEntry 3 }
portOpticalMonitoringInfoTxBiasCurrent OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tx Bias Current. It is measured in mA. If the device
supports ALARM WARNING TRAP, then followed by whether
the measured value is normal, high/low alarm or
high/low warning."
::= { portOpticalMonitoringInfoEntry 4 }
portOpticalMonitoringInfoTxPower OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the transmitter optical
signal power for the interface, measured in dBm. If the
device supports ALARM WARNING TRAP, then followed by
whether the measured value is normal, high/low alarm
or high/low warning."
::= { portOpticalMonitoringInfoEntry 5 }
portOpticalMonitoringInfoRxPower OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the receiver optical
signal power for the interface, measured in dBm. If
the device support ALARM WARNING TRAP, then followed
by whether the measured value is normal, high/low alarm
or high/low warning."
::= { portOpticalMonitoringInfoEntry 6 }
--
-- transceiver threshold
--
portTransceiverThresholdInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortTransceiverThresholdInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the threshold of transceivers."
REFERENCE "ITU recommendations G.783, G.784, G.953"
::= { portMgt 12 }
portTransceiverThresholdInfoEntry OBJECT-TYPE
SYNTAX PortTransceiverThresholdInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identify the index of the transceiver"
INDEX { portTransceiverThresholdInfoIfIndex }
::= { portTransceiverThresholdInfoTable 1 }
PortTransceiverThresholdInfoEntry ::=
SEQUENCE {
portTransceiverThresholdInfoIfIndex
InterfaceIndex,
portTransceiverThresholdInfoTemperatureLowAlarm
Integer32,
portTransceiverThresholdInfoTemperatureLowWarn
Integer32,
portTransceiverThresholdInfoTemperatureHighWarn
Integer32,
portTransceiverThresholdInfoTemperatureHighAlarm
Integer32,
portTransceiverThresholdInfoVccLowAlarm
Integer32,
portTransceiverThresholdInfoVccLowWarn
Integer32,
portTransceiverThresholdInfoVccHighWarn
Integer32,
portTransceiverThresholdInfoVccHighAlarm
Integer32,
portTransceiverThresholdInfoTxBiasCurrentLowAlarm
Integer32,
portTransceiverThresholdInfoTxBiasCurrentLowWarn
Integer32,
portTransceiverThresholdInfoTxBiasCurrentHighWarn
Integer32,
portTransceiverThresholdInfoTxBiasCurrentHighAlarm
Integer32,
portTransceiverThresholdInfoTxPowerLowAlarm
Integer32,
portTransceiverThresholdInfoTxPowerLowWarn
Integer32,
portTransceiverThresholdInfoTxPowerHighWarn
Integer32,
portTransceiverThresholdInfoTxPowerHighAlarm
Integer32,
portTransceiverThresholdInfoRxPowerLowAlarm
Integer32,
portTransceiverThresholdInfoRxPowerLowWarn
Integer32,
portTransceiverThresholdInfoRxPowerHighWarn
Integer32,
portTransceiverThresholdInfoRxPowerHighAlarm
Integer32,
portTransceiverThresholdAutoMode
TruthValue
}
portTransceiverThresholdInfoIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ifindex."
::= { portTransceiverThresholdInfoEntry 1 }
portTransceiverThresholdInfoTemperatureLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low alarm threshold of
the transmitter laser diode temperature for
the interface."
::= { portTransceiverThresholdInfoEntry 2 }
portTransceiverThresholdInfoTemperatureLowWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low warning threshold of
the transmitter laser diode temperature for
the interface."
::= { portTransceiverThresholdInfoEntry 3 }
portTransceiverThresholdInfoTemperatureHighWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high warning threshold of
the transmitter laser diode temperature for
the interface."
::= { portTransceiverThresholdInfoEntry 4 }
portTransceiverThresholdInfoTemperatureHighAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high alarm threshold of
the transmitter laser diode temperature for
the interface."
::= { portTransceiverThresholdInfoEntry 5 }
portTransceiverThresholdInfoVccLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low alarm threshold
of the Vcc."
::= { portTransceiverThresholdInfoEntry 6 }
portTransceiverThresholdInfoVccLowWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low warning threshold
of the Vcc."
::= { portTransceiverThresholdInfoEntry 7 }
portTransceiverThresholdInfoVccHighWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high warning threshold
of the Vcc."
::= { portTransceiverThresholdInfoEntry 8 }
portTransceiverThresholdInfoVccHighAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high alarm threshold
of the Vcc."
::= { portTransceiverThresholdInfoEntry 9 }
portTransceiverThresholdInfoTxBiasCurrentLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "low alarm threshold of Tx Bias Current."
::= { portTransceiverThresholdInfoEntry 10 }
portTransceiverThresholdInfoTxBiasCurrentLowWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "low warning threshold of Tx Bias Current."
::= { portTransceiverThresholdInfoEntry 11 }
portTransceiverThresholdInfoTxBiasCurrentHighWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "high warning threshold of Tx Bias Current."
::= { portTransceiverThresholdInfoEntry 12 }
portTransceiverThresholdInfoTxBiasCurrentHighAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "high alarm threshold of Tx Bias Current."
::= { portTransceiverThresholdInfoEntry 13 }
portTransceiverThresholdInfoTxPowerLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low alarm threshold
of the transmitter optical signal power
for theinterface."
::= { portTransceiverThresholdInfoEntry 14 }
portTransceiverThresholdInfoTxPowerLowWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low warning threshold
of the transmitter optical signal power
for the interface."
::= { portTransceiverThresholdInfoEntry 15 }
portTransceiverThresholdInfoTxPowerHighWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high warning threshold
of the transmitter optical signal power
for the interface."
::= { portTransceiverThresholdInfoEntry 16 }
portTransceiverThresholdInfoTxPowerHighAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high alarm threshold
of the transmitter optical signal power for
the interface."
::= { portTransceiverThresholdInfoEntry 17 }
portTransceiverThresholdInfoRxPowerLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low alarm threshold
of the receiver optical signal power for
the interface."
::= { portTransceiverThresholdInfoEntry 18 }
portTransceiverThresholdInfoRxPowerLowWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the low warning threshold
of the receiver optical signal power for
the interface."
::= { portTransceiverThresholdInfoEntry 19 }
portTransceiverThresholdInfoRxPowerHighWarn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high warning threshold
of the receiver optical signal power for
the interface."
::= { portTransceiverThresholdInfoEntry 20 }
portTransceiverThresholdInfoRxPowerHighAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object holds the high alarm threshold
of the receiver optical signal power for
the interface."
::= { portTransceiverThresholdInfoEntry 21 }
portTransceiverThresholdAutoMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicate the transceiver threshold is retrieved from
EEPROM or configured by user."
::= { portTransceiverThresholdInfoEntry 22 }
--
-- Power Saving
--
powerSavingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerSavingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for power saving configuration."
::= { portMgt 14 }
powerSavingEntry OBJECT-TYPE
SYNTAX PowerSavingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry describing the configuration and status for
power saving."
INDEX { powerSavingIfIndex }
::= { powerSavingTable 1 }
PowerSavingEntry ::= SEQUENCE
{
powerSavingIfIndex InterfaceIndex,
powerSavingStatus EnabledStatus
}
powerSavingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the powerSavingTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { powerSavingEntry 1 }
powerSavingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Power saving enabled status."
::= { powerSavingEntry 2 }
--
-- trunkMgt
--
-- Trunks: Provides additional information for Trunks
trunkMaxId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number for a trunk identifier."
::= { trunkMgt 1 }
trunkValidNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid trunks."
::= { trunkMgt 2 }
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table describing the configuration and status of each
trunk."
::= { trunkMgt 3 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry describing the configuration and status of a
particular trunk."
INDEX { trunkIndex }
::= { trunkTable 1 }
TrunkEntry ::= SEQUENCE
{
trunkIndex Integer32,
trunkPorts PortList,
trunkCreation INTEGER,
trunkStatus ValidStatus
}
trunkIndex OBJECT-TYPE
SYNTAX Integer32(0..28)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifies the trunk within the switch that is
described by the table entry."
::= { trunkEntry 1 }
trunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this trunk."
::= { trunkEntry 2 }
trunkCreation OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk."
::= { trunkEntry 3 }
trunkStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured."
::= { trunkEntry 4 }
trunkBalanceMode OBJECT-TYPE
SYNTAX INTEGER
{
macSrc(1),
macDst(2),
macSrcDst(3),
ipSrc(4),
ipDst(5),
ipSrcDst(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This defines the load balancing mode of trunks
in the system. It may be based on source and/or
destination MAC address or IP address.
macSrc(1) means source MAC address.
macDst(2) means destination MAC address.
macSrcDst(3) means source and destination MAC address.
ipSrc(4) means source IP address.
ipDst(5) means destination IP address.
ipSrcDst(6) means source and destination IP address."
::= { trunkMgt 4 }
--
-- lacpMgt
--
-- Management for Link Aggregation Control Protocol (LACP, 802.3ad),
-- that is dynamic trunking.
lacpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for LACP port configuration."
::= { lacpMgt 1 }
lacpPortEntry OBJECT-TYPE
SYNTAX LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure."
INDEX { lacpPortIndex }
::= { lacpPortTable 1 }
LacpPortEntry ::= SEQUENCE
{
lacpPortIndex InterfaceIndex,
lacpPortStatus EnabledStatus
}
lacpPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { lacpPortEntry 1 }
lacpPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether 802.3ad LACP is enabled."
::= { lacpPortEntry 2 }
--
-- staMgt
--
-- Management for Spanning Tree Algorithm (STA).
-- This has variables not already defined in the implemented
-- standard MIB(s).
staSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staMgt 1 }
staPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType."
REFERENCE "IEEE 802.1d, IEEE 802.1w, IEEE 802.1s."
::= { staMgt 2 }
staPortEntry OBJECT-TYPE
SYNTAX StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual entry of staPortTable."
AUGMENTS { dot1dStpPortEntry }
::= { staPortTable 1 }
StaPortEntry ::= SEQUENCE
{
-- for MST, RSTP
staPortProtocolMigration TruthValue,
staPortOperEdgePort TruthValue,
staPortAdminPointToPoint INTEGER,
staPortOperPointToPoint TruthValue,
staPortSystemStatus EnabledStatus,
staPortLongAdminPathCost Integer32,
staPortLongOperPathCost Integer32,
staPortBpduFlooding EnabledStatus,
staPortBpduGuard EnabledStatus,
staPortAdminEdgePortWithAuto INTEGER,
staPortBpduFilter EnabledStatus,
staPortRootGuardStatus EnabledStatus,
staPortBpduGuardAutoRecovery EnabledStatus,
staPortBpduGuardAutoRecoveryInterval Unsigned32,
staPortTcPropStop TruthValue
}
-- for MST, RSTP
staPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { staPortEntry 3 }
staPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { staPortEntry 5 }
staPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER
{
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 6 }
staPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 7 }
staPortSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staPortEntry 9 }
staPortLongAdminPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated.
Setting this to 0 means that the path cost is automatically
determined. In this case, read staPortLongOperPathCost to get
the oper value."
::= { staPortEntry 10 }
staPortLongOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 11 }
-- BPUD flooding can be configured per port when spanning tree is disable
staPortBpduFlooding OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to configure the capability of BPDUs
flooding."
::= { staPortEntry 12 }
staPortBpduGuard OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled."
::= { staPortEntry 15 }
staPortAdminEdgePortWithAuto OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port and
a value of auot (3) indicates this port in RSPT or MSTP mode
should be assumed as an edge-port after migration or max age expire
without receiving any BPDU and sending BPDU with proposal flag on."
::= { staPortEntry 16 }
staPortBpduFilter OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid transmitting BPDUs
on edge-port."
::= { staPortEntry 17 }
staPortRootGuardStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the desired status of the root guard. This variable
configures the root guard feature to enforce the root bridge
placement in the network."
::= { staPortEntry 18 }
staPortBpduGuardAutoRecovery OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of enabled(1) indicates that BPDU port guard auto
recovery mechanism is enabled for this port. A value of
disabled(2) indicates that the mechanism is disabled."
::= { staPortEntry 19 }
staPortBpduGuardAutoRecoveryInterval OBJECT-TYPE
SYNTAX Unsigned32(30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval in seconds used by BPDU guard auto recovery
mechanism."
::= { staPortEntry 20 }
staPortTcPropStop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stop topology change progate on this ifindex.
Don't enable on potentially ring port.
"
::= { staPortEntry 21 }
staProtocolType OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the
protocol become available."
REFERENCE
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
::= { staMgt 3 }
staTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
REFERENCE
"IEEE 802.1w clause 17.16.6"
DEFVAL { 3 }
::= { staMgt 4 }
staPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used."
DEFVAL { short }
::= { staMgt 5}
-- for 1s(MSTP) start
--
-- xstMgt
--
xstMgt OBJECT IDENTIFIER ::= { staMgt 6}
mstName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the Multiple Spanning Tree region."
::= { xstMgt 1 }
mstRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Revision number of the Multiple Spanning Tree region."
::= { xstMgt 2 }
mstMaxHops OBJECT-TYPE
SYNTAX Integer32(1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The max hop number counts of the Multiple Spanning Tree region."
::= { xstMgt 3 }
xstInstanceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0."
::= { xstMgt 4 }
xstInstanceCfgEntry OBJECT-TYPE
SYNTAX XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the property of the RST or MST instance."
INDEX { xstInstanceCfgIndex }
::= { xstInstanceCfgTable 1 }
XstInstanceCfgEntry ::= SEQUENCE
{
xstInstanceCfgIndex Integer32,
xstInstanceCfgPriority Integer32,
xstInstanceCfgTimeSinceTopologyChange TimeTicks,
xstInstanceCfgTopChanges Integer32,
xstInstanceCfgDesignatedRoot BridgeId,
xstInstanceCfgRootCost Integer32,
xstInstanceCfgRootPort Integer32,
xstInstanceCfgMaxAge Timeout,
xstInstanceCfgHelloTime Timeout,
xstInstanceCfgHoldTime Timeout,
xstInstanceCfgForwardDelay Timeout,
xstInstanceCfgBridgeMaxAge Timeout,
xstInstanceCfgBridgeHelloTime Timeout,
xstInstanceCfgBridgeForwardDelay Timeout,
xstInstanceCfgTxHoldCount Integer32,
xstInstanceCfgPathCostMethod StaPathCostMode
}
xstInstanceCfgIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {xstInstanceCfgEntry 1 }
xstInstanceCfgPriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096."
::= { xstInstanceCfgEntry 2 }
xstInstanceCfgTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST."
::= { xstInstanceCfgEntry 3 }
xstInstanceCfgTopChanges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized."
::= { xstInstanceCfgEntry 4 }
xstInstanceCfgDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identifier parameter in
all configuration bridge PDUs originated by this node."
REFERENCE "IEEE 802.1w."
::= { xstInstanceCfgEntry 5 }
xstInstanceCfgRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cost of the path to the root as seen from
this bridge of the RST or MST."
::= { xstInstanceCfgEntry 6 }
xstInstanceCfgRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST."
::= { xstInstanceCfgEntry 7 }
xstInstanceCfgMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using."
::= { xstInstanceCfgEntry 8 }
xstInstanceCfgHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using in RST or MST."
::= { xstInstanceCfgEntry 9 }
xstInstanceCfgHoldTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { xstInstanceCfgEntry 10 }
xstInstanceCfgForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the port
stays in each of the listening and learning
states, which precede the forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the forwarding database. This value is the
current value being used by the bridge.
xstInstanceCfgBridgeForwardDelay defines the value that
this bridge and all others would start using
if/when this bridge were to become the root."
::= { xstInstanceCfgEntry 11 }
xstInstanceCfgBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value of
xstInstanceCfgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 12 }
xstInstanceCfgBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 13 }
xstInstanceCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of
xstInstanceCfgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 14 }
xstInstanceCfgTxHoldCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate."
::= { xstInstanceCfgEntry 15 }
xstInstanceCfgPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used."
::= { xstInstanceCfgEntry 16 }
xstInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration."
::= { xstMgt 5 }
xstInstancePortEntry OBJECT-TYPE
SYNTAX XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for xstInstancePortTable."
INDEX { xstInstanceCfgIndex, dot1dStpPort }
::= { xstInstancePortTable 1 }
XstInstancePortEntry ::= SEQUENCE
{
xstInstancePortPriority Integer32,
xstInstancePortState INTEGER,
xstInstancePortEnable EnabledStatus,
xstInstancePortDesignatedRoot BridgeId,
xstInstancePortDesignatedCost Integer32,
xstInstancePortDesignatedBridge BridgeId,
xstInstancePortDesignatedPort OCTET STRING,
xstInstancePortForwardTransitions Counter32,
xstInstancePortPortRole INTEGER,
xstInstancePortAdminPathCost Integer32,
xstInstancePortOperPathCost Integer32
}
xstInstancePortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active link
in the Spanning Tree. This makes a port with higher
priority less likely to be blocked if the Spanning Tree
Algorithm is detecting network loops. Where more than one
port is assigned the highest priority, the port with
lowest numeric identifier will be enabled."
::= { xstInstancePortEntry 3 }
xstInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
discarding(1),
learning(2),
forwarding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1)."
::= { xstInstancePortEntry 4}
xstInstancePortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enabled/disabled status of the port."
::= { xstInstancePortEntry 5 }
xstInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached."
::= { xstInstancePortEntry 7 }
xstInstancePortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs."
::= { xstInstancePortEntry 8 }
xstInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment."
::= { xstInstancePortEntry 9 }
xstInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of the port on the designated
bridge for this port's segment."
::= { xstInstancePortEntry 10 }
xstInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the learning state to the forwarding state."
::= { xstInstancePortEntry 11 }
xstInstancePortPortRole OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
root(2),
designated(3),
alternate(4),
backup(5),
master(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role."
::= { xstInstancePortEntry 12 }
xstInstancePortAdminPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The admin value of the MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 13 }
xstInstancePortOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 14 }
mstInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable."
::= { xstMgt 6 }
mstInstanceEditEntry OBJECT-TYPE
SYNTAX MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceEditIndex }
::= { mstInstanceEditTable 1 }
MstInstanceEditEntry ::= SEQUENCE
{
mstInstanceEditIndex Integer32,
mstInstanceEditVlansMap OCTET STRING,
mstInstanceEditVlansMap2k OCTET STRING,
mstInstanceEditVlansMap3k OCTET STRING,
mstInstanceEditVlansMap4k OCTET STRING,
mstInstanceEditRemainingHops Integer32
}
mstInstanceEditIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceEditEntry 1 }
mstInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 2 }
mstInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 3 }
mstInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 4 }
mstInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 5 }
mstInstanceEditRemainingHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remaining hop count for this MST instance."
::= { mstInstanceEditEntry 6 }
--mstInstanceOperTable
mstInstanceOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan mapped table."
::= { xstMgt 7 }
mstInstanceOperEntry OBJECT-TYPE
SYNTAX MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceOperIndex }
::= { mstInstanceOperTable 1 }
MstInstanceOperEntry ::= SEQUENCE
{
mstInstanceOperIndex Integer32,
mstInstanceOperVlansMap OCTET STRING,
mstInstanceOperVlansMap2k OCTET STRING,
mstInstanceOperVlansMap3k OCTET STRING,
mstInstanceOperVlansMap4k OCTET STRING
}
mstInstanceOperIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceOperEntry 1 }
mstInstanceOperVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 2 }
mstInstanceOperVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 3 }
mstInstanceOperVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 4 }
mstInstanceOperVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 5 }
-- for 1s(MSTP) end
staLoopbackDetectionPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaLoopbackDetectionPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk"
::= { staMgt 8 }
staLoopbackDetectionPortEntry OBJECT-TYPE
SYNTAX StaLoopbackDetectionPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of staLoopbackDetectionPortTable."
INDEX { staLoopbackDetectionPortIfIndex}
::= { staLoopbackDetectionPortTable 1 }
StaLoopbackDetectionPortEntry ::= SEQUENCE
{
staLoopbackDetectionPortIfIndex InterfaceIndex,
staLoopbackDetectionPortStatus EnabledStatus,
staLoopbackDetectionPortTrapStatus EnabledStatus,
staLoopbackDetectionPortReleaseMode INTEGER,
staLoopbackDetectionPortRelease INTEGER,
staLoopbackDetectionPortAction INTEGER,
staLoopbackDetectionPortShutdownInterval Integer32
}
staLoopbackDetectionPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { staLoopbackDetectionPortEntry 1 }
staLoopbackDetectionPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of the port on whether spanning tree loopback detection is enabled."
::= { staLoopbackDetectionPortEntry 2 }
staLoopbackDetectionPortTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected."
::= { staLoopbackDetectionPortEntry 3 }
staLoopbackDetectionPortReleaseMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manually after loopback has occurred."
::= { staLoopbackDetectionPortEntry 4 }
staLoopbackDetectionPortRelease OBJECT-TYPE
SYNTAX INTEGER
{
noRelease(1),
release(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable."
::= { staLoopbackDetectionPortEntry 5 }
staLoopbackDetectionPortShutdownInterval OBJECT-TYPE
SYNTAX Integer32 (60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the interval used when loopback detection action is
shutdown."
::= { staLoopbackDetectionPortEntry 7 }
staSystemBPDUFlooding OBJECT-TYPE
SYNTAX INTEGER
{
to-vlan(1),
to-all(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global BPDU flooding behavior configuration.
When BPDU is received on spanning tree disabled port.
(1) BPDU is flooded to all other spanning tree disabled ports in vlan that received BPDU.
(2) BPDU is flooded to all other spanning tree disabled ports."
DEFVAL { to-vlan }
::= { staMgt 9 }
staCiscoPrestandardCompatibility OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The feature makes spanning tree operation compatible with Cisco
pre-standard versions."
::= { staMgt 11 }
--
-- restartMgt
--
-- Management for restarting the switch.
restartOpCodeFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of op-code file for start-up."
::= { restartMgt 1 }
restartConfigFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of configuration file for start-up."
::= { restartMgt 2 }
restartControl OBJECT-TYPE
SYNTAX INTEGER {
running(1),
warmBoot(2),
coldBoot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to warmBoot(2) causes the device to
reinitialize itself such that neither the agent configuration
nor the protocol entity implementation is altered. Setting this
object to coldBoot(3) causes the device to reinitialize itself such
that the agent's configuration or the protocol entity implementation
may be altered. When the device is running normally, this
variable has a value of running(1)."
::= { restartMgt 3 }
--
-- mirrorMgt
--
-- Management for port mirroring.
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports."
::= { mirrorMgt 1 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of mirrorTable."
INDEX { mirrorDestinationPort, mirrorSourcePort }
::= { mirrorTable 1 }
MirrorEntry ::= SEQUENCE
{
mirrorDestinationPort InterfaceIndex,
mirrorSourcePort InterfaceIndex,
mirrorType INTEGER,
mirrorStatus ValidStatus
}
mirrorDestinationPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 1 }
mirrorSourcePort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 2 }
mirrorType OBJECT-TYPE
SYNTAX INTEGER
{
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored."
::= { mirrorEntry 3 }
mirrorStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mirrorEntry 4 }
--
-- rspanMgt
--
rspanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RspanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the settings of RSPAN."
::= { mirrorMgt 3 }
rspanEntry OBJECT-TYPE
SYNTAX RspanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of rspanTable."
INDEX { rspanSessionId }
::= { rspanTable 1 }
RspanEntry ::= SEQUENCE
{
rspanSessionId Integer32,
rspanSrcTxPorts PortList,
rspanSrcRxPorts PortList,
rspanDstPort Integer32,
rspanDstPortTag INTEGER,
rspanSwitchRole INTEGER,
rspanRemotePorts PortList,
rspanRemoteVlanId Integer32,
rspanOperStatus INTEGER,
rspanStatus ValidStatus
}
rspanSessionId OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The session ID that may specify an entry in the table which
contains destination port(s) information."
::= { rspanEntry 1 }
rspanSrcTxPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source port list in tx mode."
::= { rspanEntry 2 }
rspanSrcRxPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source port list in rx mode."
::= { rspanEntry 3 }
rspanDstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The port number of a destination port. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { rspanEntry 4 }
rspanDstPortTag OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
untagged(2),
tagged(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the traffic which is sent out from source port
with RSPAN VLAN ID or not."
::= { rspanEntry 5 }
rspanSwitchRole OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
source(2),
intermediate(3),
destination(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the role of current switch."
::= { rspanEntry 6 }
rspanRemotePorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the uplink port list."
::= { rspanEntry 7 }
rspanRemoteVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the ID of a RSPAN VLAN."
::= { rspanEntry 8 }
rspanOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational status of the entry. A status of up(1)
means the setting of a session is complete and it has
started performing its function. A status of down(2) means
no function is performed because of incompleted session
setting."
::= { rspanEntry 9 }
rspanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { rspanEntry 10 }
--
-- igmpSnoopMgt
--
-- Management for Internet Group Management Protocol (IGMP)
-- Snooping.
igmpSnoopStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. "
DEFVAL { enabled }
::= { igmpSnoopMgt 1 }
igmpSnoopQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables (disables) whether the switch acts as an IGMP
querier."
DEFVAL { enabled }
::= { igmpSnoopMgt 2 }
igmpSnoopRouterPortExpireTime OBJECT-TYPE
SYNTAX Integer32 (300..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires."
DEFVAL { 300 }
::= { igmpSnoopMgt 6 }
igmpSnoopVersion OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IGMP version snooped"
DEFVAL { 2 }
::= { igmpSnoopMgt 7 }
igmpSnoopRouterCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current router ports."
::= { igmpSnoopMgt 8 }
igmpSnoopRouterCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current router ports."
INDEX { igmpSnoopRouterCurrentVlanIndex }
::= {
igmpSnoopRouterCurrentTable 1 }
IgmpSnoopRouterCurrentEntry ::=
SEQUENCE {
igmpSnoopRouterCurrentVlanIndex
Unsigned32,
igmpSnoopRouterCurrentPorts
PortList,
igmpSnoopRouterCurrentStatus
PortList
}
igmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 1 }
igmpSnoopRouterCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are current router ports, including static
router ports. Please refer to igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 2 }
igmpSnoopRouterCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterCurrentEntry 3 }
igmpSnoopRouterStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static router ports."
::= { igmpSnoopMgt 9 }
igmpSnoopRouterStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static router ports."
INDEX { igmpSnoopRouterStaticVlanIndex }
::= {
igmpSnoopRouterStaticTable 1 }
IgmpSnoopRouterStaticEntry ::=
SEQUENCE {
igmpSnoopRouterStaticVlanIndex
Unsigned32,
igmpSnoopRouterStaticPorts
PortList,
igmpSnoopRouterStaticStatus
ValidStatus
}
igmpSnoopRouterStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterStaticEntry 1 }
igmpSnoopRouterStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterStaticEntry 2 }
igmpSnoopRouterStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopRouterStaticEntry 3 }
igmpSnoopMulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static multicast addresses."
::= { igmpSnoopMgt 11 }
igmpSnoopMulticastStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static multicast addresses."
INDEX { igmpSnoopMulticastStaticVlanIndex,
igmpSnoopMulticastStaticIpAddress }
::= {
igmpSnoopMulticastStaticTable 1 }
IgmpSnoopMulticastStaticEntry ::=
SEQUENCE {
igmpSnoopMulticastStaticVlanIndex
Unsigned32,
igmpSnoopMulticastStaticIpAddress
IpAddress,
igmpSnoopMulticastStaticPorts
PortList,
igmpSnoopMulticastStaticStatus
ValidStatus
}
igmpSnoopMulticastStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastStaticEntry 1 }
igmpSnoopMulticastStaticIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastStaticEntry 2 }
igmpSnoopMulticastStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are members."
::= { igmpSnoopMulticastStaticEntry 3 }
igmpSnoopMulticastStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopMulticastStaticEntry 4 }
igmpSnoopCurrentVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for enabling or disabling IGMP snooping per VLAN."
::= { igmpSnoopMgt 14 }
igmpSnoopCurrentVlanEntry OBJECT-TYPE
SYNTAX IgmpSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for enabling or disabling IGMP snooping."
INDEX { igmpSnoopCurrentVlanIndex }
::= { igmpSnoopCurrentVlanTable 1 }
IgmpSnoopCurrentVlanEntry ::= SEQUENCE
{
igmpSnoopCurrentVlanIndex VlanIndex,
igmpSnoopCurrentVlanStatus EnabledStatus,
igmpSnoopCurrentVlanImmediateLeave EnabledStatus,
igmpSnoopCurrentVlanGeneralQuerySuppression EnabledStatus,
igmpSnoopCurrentVlanLastMemQueryCount Unsigned32,
igmpSnoopCurrentVlanLastMemQueryIntvl Unsigned32,
igmpSnoopCurrentVlanProxyAddress IpAddress,
igmpSnoopCurrentVlanQueryIntvl Unsigned32,
igmpSnoopCurrentVlanQueryRespIntvl Unsigned32,
igmpSnoopCurrentVlanProxyReporting INTEGER,
igmpSnoopCurrentVlanVersion Unsigned32,
igmpSnoopCurrentVlanVersionExclusive EnabledStatus,
igmpSnoopCurrentVlanImmediateLeaveByHostIp EnabledStatus
}
igmpSnoopCurrentVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { igmpSnoopCurrentVlanEntry 1 }
igmpSnoopCurrentVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping on this VLAN.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports."
::= { igmpSnoopCurrentVlanEntry 2 }
igmpSnoopCurrentVlanImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the Immediate-Leave feature on this VLAN."
::= { igmpSnoopCurrentVlanEntry 3 }
igmpSnoopCurrentVlanGeneralQuerySuppression OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the general query suppresion
on this VLAN."
::= { igmpSnoopCurrentVlanEntry 4 }
igmpSnoopCurrentVlanLastMemQueryCount OBJECT-TYPE
SYNTAX Unsigned32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the number of queries sent by the switch before
it assumes there are no local members."
::= { igmpSnoopCurrentVlanEntry 5 }
igmpSnoopCurrentVlanLastMemQueryIntvl OBJECT-TYPE
SYNTAX Unsigned32(1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The last member query interval is the max response time
inserted into group-specific queries sent in response to
leave group messages,and is also the the max response time
inserted into group-and-source-specific query messages."
::= { igmpSnoopCurrentVlanEntry 6 }
igmpSnoopCurrentVlanProxyAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the address of queries sent by the switch."
::= { igmpSnoopCurrentVlanEntry 7 }
igmpSnoopCurrentVlanQueryIntvl OBJECT-TYPE
SYNTAX Unsigned32(2..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the query interval of queries sent by the switch."
::= { igmpSnoopCurrentVlanEntry 8 }
igmpSnoopCurrentVlanQueryRespIntvl OBJECT-TYPE
SYNTAX Unsigned32(10..31740)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the query response interval of queries
sent by the switch."
::= { igmpSnoopCurrentVlanEntry 9 }
igmpSnoopCurrentVlanProxyReporting OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
default(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to enable the feature.
Set this variable to disabled(2) to disable the feature.
Set this variable to default(3), the status of the feature
is decided by the global configuration."
::= { igmpSnoopCurrentVlanEntry 10 }
igmpSnoopCurrentVlanVersion OBJECT-TYPE
SYNTAX Unsigned32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the version of igmp packets is supported by this vlan."
::= { igmpSnoopCurrentVlanEntry 11 }
igmpSnoopCurrentVlanVersionExclusive OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable control of the IGMP Snooping exclusive
supported version."
::= { igmpSnoopCurrentVlanEntry 12 }
igmpSnoopCurrentVlanImmediateLeaveByHostIp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the Immediate-Leave feature by host ip on this VLAN."
::= { igmpSnoopCurrentVlanEntry 14 }
igmpSnoopMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current multicast addresses."
::= { igmpSnoopMgt 15 }
igmpSnoopMulticastGroupEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Group multicast addresses."
INDEX { igmpSnoopMulticastGroupVlanIndex,
igmpSnoopMulticastGroupIpAddress,
igmpSnoopMulticastGroupSourceIPAddress }
::= {
igmpSnoopMulticastGroupTable 1 }
IgmpSnoopMulticastGroupEntry ::=
SEQUENCE {
igmpSnoopMulticastGroupVlanIndex VlanIndex,
igmpSnoopMulticastGroupIpAddress IpAddress,
igmpSnoopMulticastGroupSourceIPAddress IpAddress,
igmpSnoopMulticastGroupPorts PortList,
igmpSnoopMulticastGroupStatus PortList,
igmpSnoopMulticastGroupPortCount Unsigned32
}
igmpSnoopMulticastGroupVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastGroupEntry 1 }
igmpSnoopMulticastGroupIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastGroupEntry 2 }
igmpSnoopMulticastGroupSourceIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Source IP address of source."
::= { igmpSnoopMulticastGroupEntry 3 }
igmpSnoopMulticastGroupPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastGroupEntry 4 }
igmpSnoopMulticastGroupStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static IGMP member ports."
::= { igmpSnoopMulticastGroupEntry 5 }
igmpSnoopMulticastGroupPortCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of forwarding port in this group"
::= { igmpSnoopMulticastGroupEntry 6 }
igmpSnoopFilterStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Parameter to enable or disable IGMP filtering on the device."
::= { igmpSnoopMgt 17 }
igmpSnoopProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the IGMP snooping profile."
::= { igmpSnoopMgt 18 }
igmpSnoopProfileEntry OBJECT-TYPE
SYNTAX IgmpSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the IGMP snooping profile."
INDEX { igmpSnoopProfileId }
::= { igmpSnoopProfileTable 1 }
IgmpSnoopProfileEntry ::= SEQUENCE
{
igmpSnoopProfileId Unsigned32,
igmpSnoopProfileAction INTEGER,
igmpSnoopProfileStatus ValidStatus
}
igmpSnoopProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ID of the IGMP snooping profile."
::= { igmpSnoopProfileEntry 1 }
igmpSnoopProfileAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The access mode of the IGMP snooping profile."
DEFVAL { deny }
::= { igmpSnoopProfileEntry 2 }
igmpSnoopProfileStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopProfileEntry 3 }
igmpSnoopProfileCtl OBJECT IDENTIFIER ::= { igmpSnoopMgt 19 }
igmpSnoopProfileCtlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ID of the IGMP snooping profile. The default value
is zero, meaning that no ID is specified. In order to
create a profile, a non-zero value must be specified."
::= { igmpSnoopProfileCtl 1 }
igmpSnoopProfileCtlInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { igmpSnoopProfileCtl 2 }
igmpSnoopProfileCtlStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled
IP multicast addresses."
::= { igmpSnoopProfileCtl 3 }
igmpSnoopProfileCtlEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled
IP multicast addresses."
::= { igmpSnoopProfileCtl 4 }
igmpSnoopProfileCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to create(2) creates the range of the
controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the
controlled IP multicast addresses.
When the action is completed, this object becomes
noAction(1)."
::= { igmpSnoopProfileCtl 5 }
igmpSnoopProfileRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the range of the IGMP snooping
profile."
::= { igmpSnoopMgt 20 }
igmpSnoopProfileRangeEntry OBJECT-TYPE
SYNTAX IgmpSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the range of the IGMP snooping
profile."
INDEX { igmpSnoopProfileRangeProfileId,
igmpSnoopProfileRangeInetAddressType,
igmpSnoopProfileRangeStartInetAddress }
::= { igmpSnoopProfileRangeTable 1 }
IgmpSnoopProfileRangeEntry ::= SEQUENCE
{
igmpSnoopProfileRangeProfileId Unsigned32,
igmpSnoopProfileRangeInetAddressType InetAddressType,
igmpSnoopProfileRangeStartInetAddress InetAddress,
igmpSnoopProfileRangeEndInetAddress InetAddress,
igmpSnoopProfileRangeAction INTEGER
}
igmpSnoopProfileRangeProfileId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as igmpSnoopProfileId."
::= { igmpSnoopProfileRangeEntry 1 }
igmpSnoopProfileRangeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { igmpSnoopProfileRangeEntry 2 }
igmpSnoopProfileRangeStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled
IP multicast addresses."
::= { igmpSnoopProfileRangeEntry 3 }
igmpSnoopProfileRangeEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled
IP multicast addresses."
::= { igmpSnoopProfileRangeEntry 4 }
igmpSnoopProfileRangeAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The access mode of the IGMP snooping profile."
DEFVAL { deny }
::= { igmpSnoopProfileRangeEntry 5 }
igmpSnoopFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in IGMP filtering."
::= { igmpSnoopMgt 21 }
igmpSnoopFilterPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in IGMP filtering."
INDEX { igmpSnoopFilterPortIndex }
::= { igmpSnoopFilterPortTable 1 }
IgmpSnoopFilterPortEntry ::= SEQUENCE
{
igmpSnoopFilterPortIndex Unsigned32,
igmpSnoopFilterPortProfileId Integer32
}
igmpSnoopFilterPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopFilterPortEntry 1 }
igmpSnoopFilterPortProfileId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The igmpSnoopProfileEntry identified by a particular value of this index
is the same interface identified by the same value of the igmpSnoopProfileId
object. If there is no corresponding entry in the igmpSnoopProfileTable,
then no association exists. In particular, if this value is zero, no
associated profile will be generated, as zero is not a valid profile index."
::= { igmpSnoopFilterPortEntry 2 }
igmpSnoopThrottlePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in IGMP throttling."
::= { igmpSnoopMgt 22 }
igmpSnoopThrottlePortEntry OBJECT-TYPE
SYNTAX IgmpSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in IGMP throttling."
INDEX { igmpSnoopThrottlePortIndex }
::= { igmpSnoopThrottlePortTable 1 }
IgmpSnoopThrottlePortEntry ::= SEQUENCE
{
igmpSnoopThrottlePortIndex Unsigned32,
igmpSnoopThrottlePortRunningStatus INTEGER,
igmpSnoopThrottlePortAction INTEGER,
igmpSnoopThrottlePortMaxGroups Integer32,
igmpSnoopThrottlePortCurrentGroups Integer32
}
igmpSnoopThrottlePortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopThrottlePortEntry 1 }
igmpSnoopThrottlePortRunningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive."
::= { igmpSnoopThrottlePortEntry 2 }
igmpSnoopThrottlePortAction OBJECT-TYPE
SYNTAX INTEGER
{
replace(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join.
A value of deny(2) means to deny the IGMP report request when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join."
DEFVAL { deny }
::= { igmpSnoopThrottlePortEntry 3 }
igmpSnoopThrottlePortMaxGroups OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of IGMP groups that the interface can join."
::= { igmpSnoopThrottlePortEntry 4 }
igmpSnoopThrottlePortCurrentGroups OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of IGMP groups that the interface has joined."
::= { igmpSnoopThrottlePortEntry 5}
--
--
--
igmpSnoopPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IGMP Snooping service per port."
::= {igmpSnoopMgt 27 }
igmpSnoopPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of IGMP Snooping service per port."
INDEX { igmpSnoopPortIndex }
::= {igmpSnoopPortTable 1}
IgmpSnoopPortEntry ::=
SEQUENCE {
igmpSnoopPortIndex Unsigned32,
igmpSnoopQueryDrop INTEGER,
igmpSnoopMulticastDataDrop INTEGER,
igmpSnoopPortNumGroups Unsigned32,
igmpSnoopPortNumJoinSend Unsigned32,
igmpSnoopPortNumJoins Unsigned32,
igmpSnoopPortNumJoinSuccess Unsigned32,
igmpSnoopPortNumLeavesSend Unsigned32,
igmpSnoopPortNumLeaves Unsigned32,
igmpSnoopPortNumGeneralQuerySend Unsigned32,
igmpSnoopPortNumGeneralQueryRecevied Unsigned32,
igmpSnoopPortNumSepcificQuerySend Unsigned32,
igmpSnoopPortNumSpecificQueryReceived Unsigned32,
igmpSnoopPortNumInvalidReport Unsigned32,
igmpSnoopPortClearStatistics TruthValue
}
igmpSnoopPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopPortEntry 1 }
igmpSnoopQueryDrop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable dropping IGMP Query packet."
DEFVAL { disable }
::= { igmpSnoopPortEntry 3 }
igmpSnoopMulticastDataDrop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable dropping IP multicast data "
DEFVAL { disable }
::= { igmpSnoopPortEntry 4 }
igmpSnoopPortNumGroups OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current learned groups "
::= { igmpSnoopPortEntry 5 }
igmpSnoopPortNumJoinSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join send "
::= { igmpSnoopPortEntry 6 }
igmpSnoopPortNumJoins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join recieved "
::= { igmpSnoopPortEntry 7 }
igmpSnoopPortNumJoinSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join group success "
::= { igmpSnoopPortEntry 8 }
igmpSnoopPortNumLeavesSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave send"
::= { igmpSnoopPortEntry 9 }
igmpSnoopPortNumLeaves OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave received "
::= { igmpSnoopPortEntry 10}
igmpSnoopPortNumGeneralQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query send. "
::= { igmpSnoopPortEntry 11}
igmpSnoopPortNumGeneralQueryRecevied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query received. "
::= { igmpSnoopPortEntry 12}
igmpSnoopPortNumSepcificQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query send. "
::= { igmpSnoopPortEntry 13}
igmpSnoopPortNumSpecificQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query received. "
::= { igmpSnoopPortEntry 14}
igmpSnoopPortNumInvalidReport OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid report received. "
::= { igmpSnoopPortEntry 15}
igmpSnoopPortClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear this VLAN all statistics "
::= { igmpSnoopPortEntry 16}
--
-- igmpSnoopGlobalMgt
--
-- Global Management for Internet Group Management Protocol (IGMP)
-- Snooping.
igmpSnoopGlobalMgt OBJECT IDENTIFIER ::= { igmpSnoopMgt 28 }
igmpSnoopProxyReporting OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping proxy reporting
on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 1 }
igmpSnoopRouterAlertOptionCheck OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping router alert
option check on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 2 }
igmpSnoopTcnFlood OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping tcn flood
on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 3 }
igmpSnoopTcnQuerySolicit OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping tcn query
solicit on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 4 }
igmpSnoopUnregisteredDataFlood OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping Unregistered
data flood solicit on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 5 }
igmpSnoopUnsolicitedReportInterval OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports."
DEFVAL { 400 }
::= { igmpSnoopGlobalMgt 6 }
igmpSnoopVersionExclusive OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping version
exclusive on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 7 }
igmpSnoopMrouterForwardMode OBJECT-TYPE
SYNTAX INTEGER
{
dynamic(1),
forward(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Paremete to set IGMP snooping Mrouter port forward mode.
When set dynamic, IGMP snooping Mrouter port won't forward multicast streams received from other mrouter port.
When set forward, IGMP snooping Mrouter port will forward multicast streams received from other mrouter port.
"
::= { igmpSnoopGlobalMgt 8 }
igmpSnoopForwardingPriority OBJECT-TYPE
SYNTAX Integer32(0..7|65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IGMP snooping multicast stream forwarding priority.
If value is 65535, it means the priority is disabled"
::= { igmpSnoopMgt 29 }
igmpSnoopQueryDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopQueryDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IGMP Snooping query drop per vlan and per vlan configuration."
::= {igmpSnoopMgt 30 }
igmpSnoopQueryDropEntry OBJECT-TYPE
SYNTAX IgmpSnoopQueryDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of IGMP Snooping service per port and per VLAN."
INDEX { igmpSnoopQueryDropPortIndex }
::= {igmpSnoopQueryDropTable 1}
IgmpSnoopQueryDropEntry ::= SEQUENCE {
igmpSnoopQueryDropPortIndex Unsigned32,
igmpSnoopQueryDropVlanBitmap OCTET STRING
}
igmpSnoopQueryDropPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopQueryDropEntry 1 }
igmpSnoopQueryDropVlanBitmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN bitmap which query drop applied on this port.
If all zero, it means disable,
For all VLAN, please use igmpSnoopPortTable to configure."
::= { igmpSnoopQueryDropEntry 2 }
igmpSnoopClearDynamicGroups OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear all IGMP groups which are learned by IGMP report and MVR."
::= { igmpSnoopMgt 32}
igmpSnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IGMP Snooping service per port."
::= {igmpSnoopMgt 33 }
igmpSnoopVlanEntry OBJECT-TYPE
SYNTAX IgmpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of IGMP Snooping service per VLAN."
INDEX { igmpSnoopVlanIndex }
::= {igmpSnoopVlanTable 1}
IgmpSnoopVlanEntry ::=
SEQUENCE {
igmpSnoopVlanIndex VlanIndex,
igmpSnoopVlanNumGroups Unsigned32,
igmpSnoopVlanNumJoinSend Unsigned32,
igmpSnoopVlanNumJoins Unsigned32,
igmpSnoopVlanNumJoinSuccess Unsigned32,
igmpSnoopVlanNumLeavesSend Unsigned32,
igmpSnoopVlanNumLeaves Unsigned32,
igmpSnoopVlanNumGeneralQuerySend Unsigned32,
igmpSnoopVlanNumGeneralQueryRecevied Unsigned32,
igmpSnoopVlanNumSepcificQuerySend Unsigned32,
igmpSnoopVlanNumSpecificQueryReceived Unsigned32,
igmpSnoopVlanNumInvalidReport Unsigned32,
igmpSnoopVlanClearStatistics TruthValue
}
igmpSnoopVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN ID"
::= { igmpSnoopVlanEntry 1 }
igmpSnoopVlanNumGroups OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current learned groups "
::= { igmpSnoopVlanEntry 2 }
igmpSnoopVlanNumJoinSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join send."
::= { igmpSnoopVlanEntry 3 }
igmpSnoopVlanNumJoins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join received "
::= { igmpSnoopVlanEntry 4 }
igmpSnoopVlanNumJoinSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of jion success "
::= { igmpSnoopVlanEntry 5 }
igmpSnoopVlanNumLeavesSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave send."
::= { igmpSnoopVlanEntry 6 }
igmpSnoopVlanNumLeaves OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave received "
::= { igmpSnoopVlanEntry 7}
igmpSnoopVlanNumGeneralQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query send "
::= { igmpSnoopVlanEntry 8}
igmpSnoopVlanNumGeneralQueryRecevied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query received "
::= { igmpSnoopVlanEntry 9}
igmpSnoopVlanNumSepcificQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query send"
::= { igmpSnoopVlanEntry 10}
igmpSnoopVlanNumSpecificQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of sepcific query received "
::= { igmpSnoopVlanEntry 11}
igmpSnoopVlanNumInvalidReport OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid report received"
::= { igmpSnoopVlanEntry 12}
igmpSnoopVlanClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear this VLAN statistics"
::= { igmpSnoopVlanEntry 13}
--
-- The IpMgt Group
--
-- Management for Internet Protocol (IP).
netConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of netConfigEntry."
::= { ipMgt 1 }
netConfigEntry OBJECT-TYPE
SYNTAX NetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresponding interface."
INDEX { netConfigIfIndex, netConfigIPAddress, netConfigSubnetMask }
::= { netConfigTable 1 }
NetConfigEntry ::= SEQUENCE {
netConfigIfIndex Integer32,
netConfigIPAddress IpAddress,
netConfigSubnetMask IpAddress,
netConfigPrimaryInterface INTEGER,
netConfigUnnumbered INTEGER,
netConfigStatus RowStatus
}
netConfigIfIndex OBJECT-TYPE
SYNTAX Integer32(1001..5097)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table."
::= { netConfigEntry 1 }
netConfigIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { netConfigEntry 2 }
netConfigSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { netConfigEntry 3 }
netConfigPrimaryInterface OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether this is a primary interface."
::= { netConfigEntry 4 }
netConfigUnnumbered OBJECT-TYPE
SYNTAX INTEGER
{
unnumbered(1),
notUnnumbered(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this is an unnumbered interface."
::= { netConfigEntry 5 }
netConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { netConfigEntry 6 }
netDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0."
::= { ipMgt 2 }
ipHttpState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTP is enabled."
::= { ipMgt 3 }
ipHttpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTP."
::= { ipMgt 4 }
ipDhcpRestart OBJECT-TYPE
SYNTAX INTEGER
{
restart(1),
noRestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to restart(1) the DHCP server will restart. When read,
this value always returns noRestart(2)."
::= { ipMgt 5 }
-- optional
ipHttpsState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTPS is enabled."
::= { ipMgt 6 }
ipHttpsPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTPS."
::= { ipMgt 7 }
dhcpMgt OBJECT IDENTIFIER ::= { ipMgt 11 }
dhcpClient OBJECT IDENTIFIER ::= { dhcpMgt 1 }
dhcpOption82 OBJECT IDENTIFIER ::= { dhcpMgt 4 }
dhcpcOptions OBJECT IDENTIFIER ::= { dhcpClient 1 }
dhcpcInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpcInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs)."
::= { dhcpcOptions 1 }
dhcpcInterfaceEntry OBJECT-TYPE
SYNTAX DhcpcInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for DHCP client information listed by interface."
INDEX { dhcpcIfIndex }
::= { dhcpcInterfaceTable 1 }
DhcpcInterfaceEntry ::= SEQUENCE
{
dhcpcIfIndex Integer32,
dhcpcIfVendorClassIdMode INTEGER,
dhcpcIfVendorClassId OCTET STRING
}
dhcpcIfIndex OBJECT-TYPE
SYNTAX Integer32(1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined by ifIndex in the IF-MIB.(static vlan if index)"
::= { dhcpcInterfaceEntry 1 }
dhcpcIfVendorClassIdMode OBJECT-TYPE
SYNTAX INTEGER
{
notSpecify(1),
text(2),
hex(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the vendor class ID is in text mode or in
Hex mode."
::= { dhcpcInterfaceEntry 4 }
dhcpcIfVendorClassId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value that the DHCP client sets in the vendor
class_id option of DHCPDISCOVER and DHCPREQUEST messages.
This value may be used by DHCP servers to identify vendor
classof the client."
::= { dhcpcInterfaceEntry 5 }
dhcpRelay OBJECT IDENTIFIER ::= { dhcpMgt 2 }
--dhcpRelayRestart
dhcpRelayRestart OBJECT-TYPE
SYNTAX INTEGER
{
restart(1),
noRestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to restart(1) to restart DCHP Relay.
Always get noRestart(2) when you read this variable."
::= { dhcpRelay 3 }
dhcpRelayServerInetAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpRelayServerInetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify Relay Server IP
address and then restart DHCP Relay. This Table is to specify Relay
Server IP address,the maximum numbers of server IP address user can
specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart
variable."
::= { dhcpRelay 4 }
dhcpRelayServerInetAddrEntry OBJECT-TYPE
SYNTAX DhcpRelayServerInetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of dhcpRelayServerAddrTable.
"
INDEX
{
dhcpRelayServerInetAddrIfIndex,
dhcpRelayServerInetAddrIndex
}
::= { dhcpRelayServerInetAddrTable 1 }
DhcpRelayServerInetAddrEntry ::= SEQUENCE
{
dhcpRelayServerInetAddrIfIndex Integer32,
dhcpRelayServerInetAddrIndex Integer32,
dhcpRelayServerInetAddressType InetAddressType,
dhcpRelayServerInetAddress InetAddress
}
dhcpRelayServerInetAddrIfIndex OBJECT-TYPE
SYNTAX Integer32(1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN interface being used by this table entry."
::= { dhcpRelayServerInetAddrEntry 1 }
dhcpRelayServerInetAddrIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index of the Relay server IP address."
::= { dhcpRelayServerInetAddrEntry 2 }
dhcpRelayServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The INET address type of the relay server."
::= { dhcpRelayServerInetAddrEntry 3 }
dhcpRelayServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The INET address of the relay server."
::= { dhcpRelayServerInetAddrEntry 4 }
--pingMgt
--
pingMgt OBJECT IDENTIFIER ::= { ipMgt 15 }
pingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the IP address of the device that is planned
to ping."
::= { pingMgt 1 }
pingPacketSize OBJECT-TYPE
SYNTAX Integer32 (32..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the size of each data potion of ping packets
in bytes."
DEFVAL { 32 }
::= { pingMgt 2 }
pingCompleted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) will be read when this ping operation has
been either responded to or changed to the time-out status.
A value of false(2) will be read when there is a ping
operation running and all associated objects in the pingMgt
operation cannot be modified during this period."
::= { pingMgt 4 }
pingAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
pingStart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action of the pingMgt operation. Sets these objects to
pingStart(2) to begin the ping operation. Once the action
is set to pingStart(2), the associated pingMgt objects cannot
be modified until this ping operation is completed
(pingCompleted is true). When the ping has ended or there is
no ping operation performing, this object will get a value of
noAction(1)."
::= { pingMgt 5 }
-- ASV3518KO-FLF-02, 2007-01, for CHT
--
pingProbeCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the number of times to perform a ping operation at a
remote host."
::= { pingMgt 6 }
-- For CHT
pingSentPackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of this object reflects the number of probes sent.
The value of this object must be reported as 0 when no probes
have been sent."
::= { pingMgt 7 }
pingReceivedPackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of responses received. The value of this object must
be reported as 0 when no probe responses have been received."
::= { pingMgt 8 }
-- For CHT
pingPacketLossRate OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet loss rate of this ping operation. This variable is
calculated by pingReceivedPackets and pingSentPackets. The
rate is expressed as a percentage."
::= { pingMgt 9 }
-- For CHT
pingHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PingHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the executive result information for the ping
operation."
::= { pingMgt 10 }
pingHistoryEntry OBJECT-TYPE
SYNTAX PingHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the pingHistory table."
INDEX { pingHistoryIndex }
::= { pingHistoryTable 1 }
PingHistoryEntry::= SEQUENCE
{
pingHistoryIndex Integer32,
pingHistoryResponse Integer32
}
pingHistoryIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A new entry in this table is created when the result of
a ping probe is determined. The old entries will be cleared
when a new ping action is started."
::= { pingHistoryEntry 1 }
pingHistoryResponse OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable represents the round trip time and is
measured in milliseconds. The variable is the difference
between received time and sent time for a ping probe. If
the difference value is more than the time-out value or no
response is received, then the variable will be 5000
milliseconds."
::= { pingHistoryEntry 2 }
dhcpOption82Status OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set enabled(1) to enable DHCP Relay Option 82,
set disabled(2) to disable it."
::= { dhcpOption82 1 }
dhcpOption82Policy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
replace(2),
keep(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provide three policies to handle packet"
::= { dhcpOption82 2 }
dhcpOption82RemoteIDMode OBJECT-TYPE
SYNTAX INTEGER
{
mac-address-in-hex(1),
mac-address-in-ascii(2),
ip-address-in-hex(3),
ip-address-in-ascii(4),
configured-string(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provide five mode for insertion remote-id sub-option of option 82.
If configured-string(5) has been set, dhcpOption82RemoteIDString
will take effect."
::= { dhcpOption82 3 }
dhcpOption82RemoteIDString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set string to remote-id sub-option of option 82.
It only take effect when dhcpOption82RemoteIDMode is set to configured-string(5)"
::= { dhcpOption82 4 }
dhcpOption82EncodeFormat OBJECT-TYPE
SYNTAX INTEGER
{
extra-subtype-included(1),
no-extra-subtype-included(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set encode format for CID and RID in option82.
Set extra-subtype-included(1) will have extra subtype and length field in CID and RID.
Set no-extra-subtype-included(2) will only have TLV format for CID and RID."
::= { dhcpOption82 5 }
dhcpOption82RelayServerAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpOption82RelayServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " This table is to specify relay server IP address,
the maximum number of server IP addresses user can specify is 5.
"
::= { dhcpOption82 6 }
dhcpOption82RelayServerAddrEntry OBJECT-TYPE
SYNTAX DhcpOption82RelayServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of dhcpOption82RelayServerAddrTable."
INDEX { dhcpOption82RelayServerAddrIndex }
::= { dhcpOption82RelayServerAddrTable 1 }
DhcpOption82RelayServerAddrEntry ::= SEQUENCE
{
dhcpOption82RelayServerAddrIndex Integer32,
dhcpOption82RelayServerAddrServerIp IpAddress
}
dhcpOption82RelayServerAddrIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the relay server IP address."
::= { dhcpOption82RelayServerAddrEntry 1 }
dhcpOption82RelayServerAddrServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the relay server."
::= { dhcpOption82RelayServerAddrEntry 2 }
arpCacheDeleteAll OBJECT-TYPE
SYNTAX INTEGER
{
delete(1),
noDelete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete all dynamic entries in the ARP cache,
write this variable to delete(1). Writing this variable
to noDelete(2) has no effect on the device. When
read, this variable always returns noDelete(2). This object
is only for Layer 2 switch."
::= { ipMgt 17 }
--
-- vlanMgt
--
-- Management for Virtual Local Area Network (VLAN).
-- This has variables not already defined in the implemented
-- standard MIB(s).
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for VLAN configuration."
::= { vlanMgt 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for VLAN configuration."
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE
{
vlanIndex Unsigned32,
vlanAddressMethod INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { vlanEntry 1 }
vlanAddressMethod OBJECT-TYPE
SYNTAX INTEGER
{
user(1),
bootp(2),
dhcp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to get the IP address."
::= { vlanEntry 2 }
vlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in VLAN."
::= { vlanMgt 2 }
vlanPortEntry OBJECT-TYPE
SYNTAX VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in VLAN."
INDEX { vlanPortIndex }
::= { vlanPortTable 1 }
VlanPortEntry ::= SEQUENCE
{
vlanPortIndex Integer32,
vlanPortMode INTEGER,
vlanPortPrivateVlanType INTEGER
}
vlanPortIndex OBJECT-TYPE
SYNTAX Integer32(1..40)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDGE-MIB."
::= { vlanPortEntry 1 }
vlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
hybrid(1),
dot1qTrunk(2),
access(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link."
::= { vlanPortEntry 2 }
--<2D>@SYS_CPNT_COMMUNITY_PRIVATE_VLAN<41>@(use PVLAN_MGR API) start
vlanPortPrivateVlanType OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
isolated(2),
community(3),
promiscous(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port type defined for private VLAN."
::= { vlanPortEntry 3 }
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) end
--
-- voiceVlanMgt
--
voiceVlanMgt OBJECT IDENTIFIER ::= { vlanMgt 6 }
voiceVlanOuiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the mac address which can be identified
by Voice VLAN."
::= { voiceVlanMgt 1 }
voiceVlanOuiEntry OBJECT-TYPE
SYNTAX VoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the mac address which can be identified
by Voice VLAN."
INDEX { voiceVlanOuiAddress }
::= { voiceVlanOuiTable 1 }
VoiceVlanOuiEntry ::=
SEQUENCE
{
voiceVlanOuiAddress MacAddress,
voiceVlanOuiMask MacAddress,
voiceVlanOuiDescription DisplayString,
voiceVlanOuiStatus ValidStatus
}
voiceVlanOuiAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC address can be identified by voice vlan."
::= { voiceVlanOuiEntry 1 }
voiceVlanOuiMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The mask of MAC address."
::= { voiceVlanOuiEntry 2 }
voiceVlanOuiDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The description of OUI."
::= { voiceVlanOuiEntry 3 }
voiceVlanOuiStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Current operation status of the row."
::= { voiceVlanOuiEntry 4 }
voiceVlanEnabledId OBJECT-TYPE
SYNTAX INTEGER (-1|1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN enabled status and VLAN ID:
enabled (1..4093), disabled (-1)."
::= { voiceVlanMgt 2 }
voiceVlanAgingTime OBJECT-TYPE
SYNTAX INTEGER (5..43200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN aging time, the unit of which is minute."
DEFVAL { 1440 }
::= { voiceVlanMgt 3 }
voiceVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of voice VLAN port entries."
::= { voiceVlanMgt 7 }
voiceVlanPortEntry OBJECT-TYPE
SYNTAX VoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing Voice VLAN port information,
which is applicable to a Voice VLAN enabled interface."
INDEX { voiceVlanPortIfIndex }
::= { voiceVlanPortTable 1 }
VoiceVlanPortEntry ::=
SEQUENCE
{
voiceVlanPortIfIndex Integer32,
voiceVlanPortMode INTEGER,
voiceVlanPortSecurity EnabledStatus,
voiceVlanPortPriority INTEGER,
voiceVlanPortRuleOui EnabledStatus,
voiceVlanPortRuleLldp EnabledStatus,
voiceVlanPortRemainAge DisplayString
}
voiceVlanPortIfIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of interface on which Voice VLAN function
is enabled."
REFERENCE "IfIndex in RFC1213."
::= { voiceVlanPortEntry 1 }
voiceVlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
auto (1),
manual (2),
none (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN configuration mode status."
::= { voiceVlanPortEntry 2 }
voiceVlanPortSecurity OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the security is enabled, the port only allows voice
traffic for the Voice VLAN."
::= { voiceVlanPortEntry 3 }
voiceVlanPortPriority OBJECT-TYPE
SYNTAX INTEGER(0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of the voice vlan traffic in the port."
::= { voiceVlanPortEntry 4 }
voiceVlanPortRuleOui OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address of voice device is learned from
OUI table."
::= { voiceVlanPortEntry 5 }
voiceVlanPortRuleLldp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address of voice device is learned from
LLDP discovery."
::= { voiceVlanPortEntry 6 }
voiceVlanPortRemainAge OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remaining aging time, the unit of which is minute."
::= { voiceVlanPortEntry 7 }
--
-- dot1vProtocolExPortTable
--
dot1vProtocolExPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1vProtocolExPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains protocol Vlan priority information."
::= { vlanMgt 10 }
dot1vProtocolExPortEntry OBJECT-TYPE
SYNTAX Dot1vProtocolExPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of protocol VLAN user priority sets for each port."
AUGMENTS { dot1vProtocolPortEntry }
::= { dot1vProtocolExPortTable 1 }
Dot1vProtocolExPortEntry ::= SEQUENCE
{
dot1vProtocolExPortGroupPriority INTEGER
}
dot1vProtocolExPortGroupPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the priority in the added tag for qualified frames."
::= { dot1vProtocolExPortEntry 1 }
--
-- macVlanMgt
--
macVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the settings for MAC-based VLAN."
::= { vlanMgt 11 }
macVlanEntry OBJECT-TYPE
SYNTAX MacVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the macVlanTable."
INDEX { macVlanMacMask, macVlanMacAddress }
::= { macVlanTable 1 }
MacVlanEntry ::= SEQUENCE
{
macVlanMacAddress MacAddress,
macVlanId VlanId,
macVlanPriority Integer32,
macVlanStatus ValidStatus,
macVlanMacMask MacAddress
}
macVlanMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address that may specify an entry in the table
which contains MAC-based VLAN information."
::= { macVlanEntry 1 }
macVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the VLAN ID which the MAC address associates
with."
::= { macVlanEntry 2 }
macVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the priority whcich the MAC address associates
with."
::= { macVlanEntry 3 }
macVlanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { macVlanEntry 4 }
macVlanMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address mask that may specify an entry in the table
which contains MAC-based VLAN information."
::= { macVlanEntry 5 }
macVlanClearAction OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing macVlanTable. When this object is set
to clear(2), all entries in macVlanTable will be cleared.
When this object is read, the value of this object is
always noClear(1)."
::= { vlanMgt 12 }
--
-- subnetVlanMgt
--
subnetVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubnetVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the settings for IP subnet-based
VLAN."
::= { vlanMgt 13 }
subnetVlanEntry OBJECT-TYPE
SYNTAX SubnetVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the subnetVlanTable."
INDEX { subnetVlanMask, subnetVlanIpAddress }
::= { subnetVlanTable 1 }
SubnetVlanEntry ::= SEQUENCE
{
subnetVlanIpAddress IpAddress,
subnetVlanMask IpAddress,
subnetVlanId Integer32,
subnetVlanPriority Integer32,
subnetVlanStatus ValidStatus
}
subnetVlanIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IPv4 address of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanMask object
is not equal to x."
::= { subnetVlanEntry 1 }
subnetVlanMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The netmask of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanIpAddress
object is not equal to subnetVlanIpAddress."
::= { subnetVlanEntry 2 }
subnetVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the VLAN ID which the subnet associates with."
::= { subnetVlanEntry 3 }
subnetVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the priority whcich the subnet associates with."
::= { subnetVlanEntry 4 }
subnetVlanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { subnetVlanEntry 5 }
subnetVlanClearAction OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing subnetVlanTable. When this object is
set to clear(2), all entries in subnetVlanTable will be
cleared. When this object is read, the value of this object
is always noClear(1)."
::= { vlanMgt 14 }
-- vlanStaticExtTable
vlanStaticExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanStaticExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table of dot1qVlanStaticTable. This table
enhances the original table with extra
vlanStaticExtRspanStatus to create and destroy RSPAN
VLAN(s)."
::= { vlanMgt 15 }
vlanStaticExtEntry OBJECT-TYPE
SYNTAX VlanStaticExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the vlanStaticExtTable."
AUGMENTS { dot1qVlanStaticEntry }
::= { vlanStaticExtTable 1 }
VlanStaticExtEntry ::= SEQUENCE
{
vlanStaticExtRspanStatus INTEGER
}
vlanStaticExtRspanStatus OBJECT-TYPE
SYNTAX INTEGER
{
destroy(1),
vlan(2),
rspanVlan(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Displays type of a VLAN is vlan(2) or rspanVlan(3). Set
this to destroy(1) to destroy a RSPAN VLAN. Set this to
rspanVlan(3) to create a RSPAN VLAN. Setting this to
vlan(2) is not allowed."
::= { vlanStaticExtEntry 1 }
--
-- L2/L3 VLAN Mgt
--
vlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static VLAN configuration including VLAN aggregation support."
::= { vlanMgt 17 }
vlanStaticEntry OBJECT-TYPE
SYNTAX VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured on the device by (local or
network) management."
INDEX
{
vlanStaticIndex
}
::= { vlanStaticTable 1 }
VlanStaticEntry ::= SEQUENCE
{
vlanStaticIndex VlanIndex,
vlanStaticInterfaceType INTEGER
}
vlanStaticIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID of the VLAN."
::= { vlanStaticEntry 1 }
vlanStaticInterfaceType OBJECT-TYPE
SYNTAX INTEGER
{
l2vlan(135),
l3ipvlan(136)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface type of the VLAN (there is a subtype of IANAifType).
l2vlan(135) refers to L2 interface and can't accept any L3 related
configuration. l3ipvlan(136) refers to L3 interface and can accept
L3 related configuration."
DEFVAL { l2vlan }
::= { vlanStaticEntry 2 }
--
-- priorityMgt
--
-- Management for traffic priority. This allows a user
-- to specify which data packets have greater precedence
-- when traffic is buffered in the switch due to congestion.
--prioWrrPortTable
prioWrrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for per port weighted round robin (WRR)."
::= { priorityMgt 12 }
prioWrrPortEntry OBJECT-TYPE
SYNTAX PrioWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for per port weighted round robin (WRR)."
INDEX { prioWrrPortIfIndex,prioWrrPortTrafficClass }
::= { prioWrrPortTable 1 }
PrioWrrPortEntry ::= SEQUENCE
{
prioWrrPortIfIndex InterfaceIndex,
prioWrrPortTrafficClass Integer32,
prioWrrPortWeight Integer32,
prioWrrPortStrictStatus EnabledStatus
}
prioWrrPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioWrrPortEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { prioWrrPortEntry 1 }
prioWrrPortTrafficClass OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Traffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1."
REFERENCE "MIB.IETF|Q-BRIDGE-MIB.dot1dTrafficClass."
::= { prioWrrPortEntry 2 }
prioWrrPortWeight OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Weight for this entry. Value of the object should be
ignored when prioQueueMode is strictAndWrr(3), and
prioWrrPortStrictStatus is enabled(1)."
::= { prioWrrPortEntry 3 }
prioWrrPortStrictStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used when prioSchedModePort is
strictAndWrr(4)."
::= { prioWrrPortEntry 4 }
-- prioSchedModePortTable
prioSchedModePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioSchedModePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for per port scheduling mode."
::= { priorityMgt 15 }
prioSchedModePortEntry OBJECT-TYPE
SYNTAX PrioSchedModePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for per port scheduling mode."
INDEX { prioSchedModePortIndex }
::= { prioSchedModePortTable 1 }
PrioSchedModePortEntry ::=SEQUENCE
{
prioSchedModePortIndex InterfaceIndex,
prioSchedModePort INTEGER
}
prioSchedModePortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioSchedModePortEntry."
::= { prioSchedModePortEntry 1 }
prioSchedModePort OBJECT-TYPE
SYNTAX INTEGER {
wrr(1),
strict(2),
strict-wrr(4),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The scheduling mode status of ethernet port.
wrr(1),strict(2), strict-wrr(4)"
::= { prioSchedModePortEntry 2 }
-- trapDestMgt
--
-- trapVar is for binding variables for traps, there is no value when
-- no trap is sent.
trapVar OBJECT IDENTIFIER ::= { trapDestMgt 2 }
-- For IP Filter Reject
trapIpFilterRejectMode OBJECT-TYPE
SYNTAX INTEGER
{
web(1),
snmp(2),
telnet(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3)."
::= { trapVar 6 }
trapIpFilterRejectIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the IP address that rejected by the ipfilter."
::= { trapVar 7 }
trapVarMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The MAC address."
::= { trapVar 10 }
trapVarLoginUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The name of the user who logs into the switch."
::= { trapVar 11 }
trapVarSessionType OBJECT-TYPE
SYNTAX INTEGER
{
web(1), -- deprecated; use http(6) and https(7)
snmp(2),
telnet(3),
console(4),
ssh(5),
http(6),
https(7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The method by which the user logs in to control the
switch."
::= { trapVar 12 }
trapVarLoginInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The address type of the address associated with this agent.
Only IPv4 and IPv6 types are supported."
::= { trapVar 15 }
trapVarLoginInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The IP address from which the user logs into the switch."
::= { trapVar 16 }
trapIpFilterRejectInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding, indicating
the IP address that was rejected by the IP filter."
::= { trapVar 17 }
trapIpFilterRejectInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding, indicating
the IP address that was rejected by the IP filter."
::= { trapVar 18 }
--For Auto Upgrade
trapAutoUpgradeResult OBJECT-TYPE
SYNTAX INTEGER
{
succeeded(1),
failed(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which result triggers the trap."
::= { trapVar 22 }
trapAutoUpgradeNewVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates new version which was upgraded to.
When trapAutoUpgradeResult was failed(2), it would be
null string."
::= { trapVar 23 }
trapIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the index of an interface."
::= { trapVar 30 }
trapVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the identifier of a VLAN."
::= { trapVar 31 }
-- For DHCP rogue server attack
trapDhcpClientPortIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "ifIndex for the port connected to DHCP rogue server."
::= { trapVar 62 }
trapDhcpServerIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The IP address of the rogue server."
::= { trapVar 63 }
-- For SFP's alarm/warning type
trapSfpThresholdAlarmWarnIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "ifIndex for the port issued alarm/warning trap."
::= { trapVar 64 }
trapSfpThresholdAlarmWarnType OBJECT-TYPE
SYNTAX INTEGER
{
rxPowerHighAlarm(1),
rxPowerLowAlarm(2),
rxPowerHighWarning(3),
rxPowerLowWarning(4),
txPowerHighAlarm(5),
txPowerLowAlarm(6),
txPowerHighWarning(7),
txPowerLowWarning(8),
temperatureHighAlarm(9),
temperatureLowAlarm(10),
temperatureHighWarning(11),
temperatureLowWarning(12),
voltageHighAlarm(13),
voltageLowAlarm(14),
voltageHighWarning(15),
voltageLowWarning(16),
currentHighAlarm(17),
currentLowAlarm(18),
currentHighWarning(19),
currentLowWarning(20),
rxPowerAlarmWarnCease(21),
txPowerAlarmWarnCease(22),
temperatureAlarmWarnCease(23),
voltageAlarmWarnCease(24),
currentAlarmWarnCease(25)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "SFP's alarm/warning type ."
::= { trapVar 65 }
-- For UDLD
trapUdldPortShutdownReason OBJECT-TYPE
SYNTAX INTEGER
{
unidirectionalLink(1),
mismatchWithNeighbor(2),
transmitToReceiveLoop(3),
aggressiveModeFailure(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicated the reason for the UDLD port shutdown.
unidirectionalLink(1): unidirectional link detected,
mismatchWithNeighbor(2): mismatch with neighbor state reported.
transmitToReceiveLoop(3): transmit-to-receive loop detected.
aggressiveModeFailure(4): aggressive mode failure detected."
::= { trapVar 66 }
trapDhcpServerMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The MAC address of the rogue server."
::= { trapVar 67 }
trapMacNotifyAction OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
remove(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which result triggers the trap."
::= { trapVar 68 }
--
-- qosMgt
--
-- Management for Quality of Service (QoS) for network traffic.
--
-- rateLimitMgt
--
-- optional
rateLimitMgt OBJECT IDENTIFIER ::= { qosMgt 1 }
rateLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for rate limit of each port."
::= { rateLimitMgt 2 }
rateLimitPortEntry OBJECT-TYPE
SYNTAX RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for rate limit of each port."
INDEX { rlPortIndex }
::= { rateLimitPortTable 1 }
RateLimitPortEntry ::= SEQUENCE
{
rlPortIndex InterfaceIndex,
rlPortInputStatus EnabledStatus,
rlPortOutputStatus EnabledStatus,
rlPortInputLimitInKilo Integer32,
rlPortOutputLimitInKilo Integer32,
rlPortLimitInKiloResolution Integer32,
}
rlPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { rateLimitPortEntry 1 }
-- all need (both acd and non-acd)
rlPortInputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether input rate limit is enabled for this port."
::= { rateLimitPortEntry 6 }
-- all need (both acd and non-acd)
rlPortOutputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether output rate limit is enabled for this port."
::= { rateLimitPortEntry 7 }
rlPortInputLimitInKilo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000."
::= { rateLimitPortEntry 10 }
rlPortOutputLimitInKilo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000."
::= { rateLimitPortEntry 11 }
rlPortLimitInKiloResolution OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Present the rate's resolution. Its unit is kilobits per
second"
::= { rateLimitPortEntry 12 }
cosMgt OBJECT IDENTIFIER ::= { qosMgt 3 }
prioIfClassificationModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIfClassificationModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for setting the interface Qos mapping classification mode."
::= { cosMgt 2 }
prioIfClassificationModeEntry OBJECT-TYPE
SYNTAX PrioIfClassificationModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for setting the interface Qos mapping classification mode."
INDEX
{
prioIfClassificationModeIf
}
::= { prioIfClassificationModeTable 1 }
PrioIfClassificationModeEntry ::= SEQUENCE
{
prioIfClassificationModeIf InterfaceIndex,
prioIfClassificationModeStatus INTEGER
}
prioIfClassificationModeIf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioIfClassificationModeEntry 1 }
prioIfClassificationModeStatus OBJECT-TYPE
SYNTAX INTEGER
{
cos(0),
ipPrecedence(1),
dscp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Qos mapping classification mode of the interface. cos mode means
that the internal priority is mapped from priority field of packet's
VLAN tag if a VLAN tag exists; IP precedence mode means that the
internal priority is mapped from the IP precedence value of IP
packets; DSCP mode means the internal priority is mapped from the dscp
value of IP packets."
::= { prioIfClassificationModeEntry 2 }
--
-- The interface mapping table from CoS/CFI to internal QoS label
--
prioCosToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for CoS/CFI to internal QoS label mapping."
::= { cosMgt 3 }
prioCosToDscpEntry OBJECT-TYPE
SYNTAX PrioCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for CoS/CFI to internal QoS label mapping."
INDEX
{
prioCosToDscpIfValue,
prioCosToDscpCosValue,
prioCosToDscpCFIValue
}
::= { prioCosToDscpTable 1 }
PrioCosToDscpEntry ::= SEQUENCE
{
prioCosToDscpIfValue InterfaceIndex,
prioCosToDscpCosValue Integer32,
prioCosToDscpCFIValue Integer32,
prioCosToDscpPhbValue Integer32
}
prioCosToDscpIfValue OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or the trunk interface of the device. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { prioCosToDscpEntry 1 }
prioCosToDscpCosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CoS value (0 to 7) mapped to an internal QoS label value which is
composed of PHB (3 bits) and drop precedence (2 bits)."
::= { prioCosToDscpEntry 2 }
prioCosToDscpCFIValue OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFI value (0 or 1) mapped to an internal QoS label value which is
composed of PHB (3 bits) and drop precedence (2 bits)."
::= { prioCosToDscpEntry 3 }
prioCosToDscpPhbValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PHB value of internal QoS label."
::= { prioCosToDscpEntry 5 }
--
-- The interface mapping table from DSCP to internal Qos label
--
prioDscpToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioDscpToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for DSCP to internal QoS label mapping. This table setting will
take effect only when the interface Qos mapping classification mode is
set to DSCP mode."
::= { cosMgt 5 }
prioDscpToDscpEntry OBJECT-TYPE
SYNTAX PrioDscpToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for ingress DSCP to internal QoS label mapping."
INDEX
{
prioDscpToDscpIfValue,
prioDscpToDscpIngressDscpValue
}
::= { prioDscpToDscpTable 1 }
PrioDscpToDscpEntry ::= SEQUENCE
{
prioDscpToDscpIfValue InterfaceIndex,
prioDscpToDscpIngressDscpValue Integer32,
prioDscpToDscpPhbValue Integer32
}
prioDscpToDscpIfValue OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioDscpToDscpEntry 1 }
prioDscpToDscpIngressDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ingress DSCP value which will be mapped to internal QoS label
value."
::= { prioDscpToDscpEntry 2 }
prioDscpToDscpPhbValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PHB value of internal QoS label."
::= { prioDscpToDscpEntry 4 }
--
--diffServMgt
--
diffServMgt OBJECT IDENTIFIER ::= { qosMgt 4 }
diffServPolicyMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for policy map."
::= { diffServMgt 10 }
diffServPolicyMapEntry OBJECT-TYPE
SYNTAX DiffServPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for policy map."
INDEX { diffServPolicyMapIndex }
::= { diffServPolicyMapTable 1 }
DiffServPolicyMapEntry ::= SEQUENCE
{
diffServPolicyMapIndex Integer32,
diffServPolicyMapName DisplayString,
diffServPolicyMapDescription DisplayString,
diffServPolicyMapElementIndexList OCTET STRING,
diffServPolicyMapStatus RowStatus
}
diffServPolicyMapIndex OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in this table."
::= { diffServPolicyMapEntry 1 }
diffServPolicyMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this entry."
::= { diffServPolicyMapEntry 2 }
diffServPolicyMapDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The description of this entry."
::= { diffServPolicyMapEntry 3 }
diffServPolicyMapElementIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry."
::= { diffServPolicyMapEntry 4 }
diffServPolicyMapStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active');it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServPolicyMapEntry 5 }
diffServPolicyMapAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 11 }
diffServPolicyMapAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control.
Specifies the policy map as the target to relate with
the policy map element. The policy map identified by
a particular value of this index is associated with
the same diffServPolicyMapEntry as identified by the
same value of diffServPolicyMapIndex."
::= { diffServPolicyMapAttachCtl 1 }
diffServPolicyMapAttachCtlElementIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Element Index for attachment control.Specifies the policy map
element to relate with the policy map. The policy map element
identified by a particular value of this index is associated
with the same diffServPolicyMapElementEntry as identified by
the same value of diffServPolicyMapElementIndex."
::= { diffServPolicyMapAttachCtl 2 }
diffServPolicyMapAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular
policy map element is attached to a particular policy map.
When setting this object to detach(3) to begin the not
attached operation, a particular policy map element is not
attached to a particular policy map. When the action is
finshed or no action is taken, the value of this object is
noAction(1). A particular policy map is specified in the
diffServPolicyMapAttachCtlIndex. A particularpolicy map
element is specified in the
diffServPolicyMapAttachCtlElementIndex."
::= { diffServPolicyMapAttachCtl 3 }
diffServPolicyMapElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServPolicyMapElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for policy map element."
::= { diffServMgt 12 }
diffServPolicyMapElementEntry OBJECT-TYPE
SYNTAX DiffServPolicyMapElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for policy map element."
INDEX { diffServPolicyMapElementIndex }
::= { diffServPolicyMapElementTable 1 }
DiffServPolicyMapElementEntry ::= SEQUENCE
{
diffServPolicyMapElementIndex Integer32,
diffServPolicyMapElementClassMapIndex Integer32,
diffServPolicyMapElementMeterIndex Integer32,
diffServPolicyMapElementActionIndex Integer32,
diffServPolicyMapElementStatus RowStatus
}
diffServPolicyMapElementIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in this table."
::= { diffServPolicyMapElementEntry 1 }
diffServPolicyMapElementClassMapIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex."
::= { diffServPolicyMapElementEntry 2 }
diffServPolicyMapElementMeterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is
zero, no associated meter will be associated, as zero is not a
valid meter index."
::= { diffServPolicyMapElementEntry 3 }
diffServPolicyMapElementActionIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex."
::= { diffServPolicyMapElementEntry 4 }
diffServPolicyMapElementStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServPolicyMapElementEntry 5 }
diffServClassMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for class map."
::= { diffServMgt 13 }
diffServClassMapEntry OBJECT-TYPE
SYNTAX DiffServClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for class map."
INDEX { diffServClassMapIndex }
::= { diffServClassMapTable 1 }
DiffServClassMapEntry ::= SEQUENCE
{
diffServClassMapIndex Integer32,
diffServClassMapName DisplayString,
diffServClassMapDescription DisplayString,
diffServClassMapMatchType INTEGER,
diffServClassMapElementIndexTypeList OCTET STRING,
diffServClassMapElementIndexList OCTET STRING,
diffServClassMapStatus RowStatus
}
diffServClassMapIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in this table."
::= { diffServClassMapEntry 1 }
diffServClassMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this entry."
::= { diffServClassMapEntry 2 }
diffServClassMapDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The description of this entry."
::= { diffServClassMapEntry 3 }
diffServClassMapMatchType OBJECT-TYPE
SYNTAX INTEGER {
matchAny(1),
matchAll(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The map match type of this entry."
::= { diffServClassMapEntry 4 }
diffServClassMapElementIndexTypeList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
differServClasssMapElementIndexList in order. When the type is
macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the diffServAclEntry.
When the type is ipv6Ace(4), the maping index of
differServClasssMapElementIndexList is the diffServIpv6AceEntry."
::= { diffServClassMapEntry 5 }
diffServClassMapElementIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The class map
element uses type to indicate diffServAclEntry, the
diffServIpAceEntry or diffServMacAceEntry. The type is two
octet specified in differServClasssMapElementIndexTypeList
in order. When the type is macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the diffServAclEntry.
When type is ipv6Ace(4), the maping index of
differServClasssMapElementIndexList is the
diffServIpv6AceEntry."
::= { diffServClassMapEntry 6 }
diffServClassMapStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServClassMapEntry 7 }
diffServClassMapAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 14 }
diffServClassMapAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the class map as
the target to relate with class map elements. The class
map identified by a particular value of this index is
associated with the same diffServClassMapEntry as
identified by the same value of diffServClassMapIndex."
::= { diffServClassMapAttachCtl 1 }
diffServClassMapAttachCtlElementIndexType OBJECT-TYPE
SYNTAX INTEGER {
macAce(1),
ipAce(2),
acl(3),
ipv6Ace(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Element Index for attachment control. Specifies the type of
class map element to relate with the class map. When type is
macAce(1), the index of diffServClassMapAttachCtlElementIndex
is the index of diffServMacAceEntry. When the type is
ipAce(2), the index of diffServClassMapAttachCtlElementIndex
is the index of diffServIpAceEntry. When the type is acl(3),
the index of diffServClassMapAttachCtlElementIndex is the
index of diffServAclEntry. When type is ipv6Ace(4), the index of
diffServClassMapAttachCtlElementIndex is the index of
diffServIpv6AceEntry."
::= { diffServClassMapAttachCtl 2 }
diffServClassMapAttachCtlElementIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Element Index for attachment control. Specifies the class map
element related with the class map. The class map element uses
type to indicate diffServAclEntry, the diffServIpAceEntry or
diffServMacAceEntry. The type is specified in
diffServClassMapAttachCtlElementIndexType. When
the type is macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the
diffServAclEntry. When type is ipv6Ace(4), the maping index of
differServClasssMapElementIndexList is the diffServIpv6AceEntry."
::= { diffServClassMapAttachCtl 3 }
diffServClassMapAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular class
map element is attached to a particular class map. When
setting this object to detach(3) to begin the not attached
operation, then a particular class map element is not attached
to a particular class map. When the action is finshed whether
successfully or not, or no action is taken, the value of this
object always is noAction(1). The value of a particular class
map is specified in the AclAttachCtlTargetIndex. The class map
element is specified by diffServClassMapAttachCtlElementIndexType
and diffServClassMapAttachCtlElementIndex."
::= { diffServClassMapAttachCtl 4 }
diffServAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for ACL."
::= { diffServMgt 15 }
diffServAclEntry OBJECT-TYPE
SYNTAX DiffServAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for ACL."
INDEX { diffServAclIndex }
::= { diffServAclTable 1 }
DiffServAclEntry ::= SEQUENCE
{
diffServAclIndex Integer32,
diffServAclName DisplayString,
diffServAclType INTEGER,
diffServAclAceIndexList OCTET STRING,
diffServAclStatus RowStatus
}
diffServAclIndex OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the ACL
table."
::= { diffServAclEntry 1 }
diffServAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this entry."
::= { diffServAclEntry 2 }
diffServAclType OBJECT-TYPE
SYNTAX INTEGER {
mac(1),
ipstandard(2),
ipextended(3),
ipv6standard(4),
ipv6extended(5),
arp(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be auto-
unbound from the diffServPortTable and the
diffServClassMapTable."
::= { diffServAclEntry 3 }
diffServAclAceIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate the
diffServMacAceEntry, the diffServIpAceEntry, the
diffServIpv6AceEntry or the diffServArpAceEntry. The type is
specified in diffServAclType. When the type is mac(1), the
index of diffServAclAceIndexList is the diffServMacAceEntry.
When the type is ipstandard(2) or ipextended(3), the index of
diffServAclAceIndexList is the diffServIpAceEntry. When the
type is ipv6standard(4) or ipv6extended(5), the index of
diffServAclAceIndexList is the diffServIpv6AceEntry. When the
type is arp(6), the index of diffServAclAceIndexList is the
diffServArpAceEntry."
::= { diffServAclEntry 4 }
diffServAclStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServAclEntry 5 }
diffServAclAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 16 }
diffServAclAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the ACL as the
target to relate with the IP ACE, the MAC ACE or IPv6 ACE.
The ACL identified by a particular value of this index is
associated with the same diffServAclEntry as identified by
the same value of diffServAclIndex."
::= { diffServAclAttachCtl 1 }
diffServAclAttachCtlAceType OBJECT-TYPE
SYNTAX INTEGER
{
macAce(1),
ipAce(2),
ipv6Ace(3),
arpAce(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type for attachment control. Specifies the type of
diffServAclAttachCtlAceIndex to relate with the
diffServAclAttachCtlIndex. When the type is macAce(1), the
index of diffServAclAceIndexList is the diffServMacAceEntry.
When the type is ipAce(2), the index of
diffServAclAceIndexList is the diffServIpAceEntry. When the
type is ipv6Ace(3), the index of diffServAclAceIndexList
is the diffServIpv6AceEntry. When the type is arpAce(4), the
index of diffServAclAceIndexList is the diffServArpAceEntry."
::= { diffServAclAttachCtl 2 }
diffServAclAttachCtlAceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the ACE to relate with
the diffServAclAttachCtlIndex. When
diffServAclAttachCtlAceType is macAce(1), the value of
diffServAclAttachCtlIndex is the diffServMacAceEntry. When
diffServAclAttachCtlAceType is ipAce(2), the value of
diffServAclAttachCtlIndex is the diffServIpAceEntry. When
diffServAclAttachCtlAceType is ipv6Ace(3), the value of
diffServAclAttachCtlIndex is the diffServIpv6AceEntry. When
diffServAclAttachCtlAceType is arpAce(4), the value of
diffServAclAttachCtlIndex is the diffServArpAceEntry."
::= { diffServAclAttachCtl 3 }
diffServAclAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular ACE
is attached to a particular ACL. When setting this object to
detach(3) to begin the not attached operation, then a
particular ACE is not attached to a particular ACL. When the
action is finshed whether successfully or not, or no action
is taken, the value of this object always is noAction(1), The
value of a particular ACL is specified in the
diffServAclAttachCtlAceType and diffServAclAttachCtlAceIndex."
::= { diffServAclAttachCtl 4 }
diffServIpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP ACE."
::= { diffServMgt 17 }
diffServIpAceEntry OBJECT-TYPE
SYNTAX DiffServIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP ACE."
INDEX { diffServIpAceIndex }
::= { diffServIpAceTable 1 }
DiffServIpAceEntry ::= SEQUENCE
{
diffServIpAceIndex Integer32,
diffServIpAceType INTEGER,
diffServIpAceAccess INTEGER,
diffServIpAceSourceIpAddr IpAddress,
diffServIpAceSourceIpAddrBitmask IpAddress,
diffServIpAceDestIpAddr IpAddress,
diffServIpAceDestIpAddrBitmask IpAddress,
diffServIpAceProtocol Integer32,
diffServIpAcePrec Integer32,
diffServIpAceDscp Integer32,
diffServIpAceSourcePortOp INTEGER,
diffServIpAceMinSourcePort Integer32,
diffServIpAceSourcePortBitmask Integer32,
diffServIpAceDestPortOp INTEGER,
diffServIpAceMinDestPort Integer32,
diffServIpAceDestPortBitmask Integer32,
diffServIpAceControlCode Integer32,
diffServIpAceControlCodeBitmask Integer32,
diffServIpAceStatus RowStatus
}
diffServIpAceIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the IP ACE
table."
::= { diffServIpAceEntry 1 }
diffServIpAceType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
extended(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0."
::= { diffServIpAceEntry 2 }
diffServIpAceAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this
ACE."
::= { diffServIpAceEntry 3 }
diffServIpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object."
::= { diffServIpAceEntry 4 }
diffServIpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object."
::= { diffServIpAceEntry 5 }
diffServIpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 6 }
diffServIpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1)."
::= { diffServIpAceEntry 7 }
diffServIpAceProtocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP
encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50
is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS
compatible IP over IP, 103 is PIMv2, 108 is PCP. This object
may not be modified if the associated diffServIpAceType object
is equal to standard(1)."
::= { diffServIpAceEntry 8 }
diffServIpAcePrec OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is equal to
standard(1)."
::= { diffServIpAceEntry 9 }
diffServIpAceDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 11 }
diffServIpAceSourcePortOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffServIpAceSourcePortBitmask and the
diffServIpAceMinSourcePort to match against. range(3),which is
used the diffServIpAceMinSourcePort and the
diffServIpAceMaxSourcePort to match against. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 12 }
diffServIpAceMinSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1)."
::= { diffServIpAceEntry 13 }
diffServIpAceSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 15 }
diffServIpAceDestPortOp OBJECT-TYPE
SYNTAX INTEGER{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is used the
diffServIpAceSourcePortBitmask and the
diffServIpAceMinDestPort to match against. range(3),which is
used the diffServIpAceMinDestPort and the
diffServIpAceMaxDestPort to match against. This object may not
be modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 16 }
diffServIpAceMinDestPort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 17 }
diffServIpAceDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1)."
::= { diffServIpAceEntry 19 }
diffServIpAceControlCode OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 20 }
diffServIpAceControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 21 }
diffServIpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServIpAceEntry 22 }
diffServMacAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for MAC ACE."
::= { diffServMgt 18 }
diffServMacAceEntry OBJECT-TYPE
SYNTAX DiffServMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for MAC ACE."
INDEX { diffServMacAceIndex }
::= { diffServMacAceTable 1 }
DiffServMacAceEntry ::= SEQUENCE
{
diffServMacAceIndex Integer32,
diffServMacAceAccess INTEGER,
diffServMacAcePktformat INTEGER,
diffServMacAceSourceMacAddr MacAddress,
diffServMacAceSourceMacAddrBitmask MacAddress,
diffServMacAceDestMacAddr MacAddress,
diffServMacAceDestMacAddrBitmask MacAddress,
diffServMacAceVidOp INTEGER,
diffServMacAceMinVid Integer32,
diffServMacAceVidBitmask Integer32,
diffServMacAceEtherTypeOp INTEGER,
diffServMacAceEtherTypeBitmask Integer32,
diffServMacAceMinEtherType Integer32,
diffServMacAceCosOp INTEGER,
diffServMacAceCosBitmask INTEGER,
diffServMacAceMinCos INTEGER,
diffServMacAceStatus RowStatus
}
diffServMacAceIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the MAC ACE
table."
::= { diffServMacAceEntry 1 }
diffServMacAceAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this
ACE."
::= { diffServMacAceEntry 2 }
diffServMacAcePktformat OBJECT-TYPE
SYNTAX INTEGER {
any(1),
untagged-Eth2(2),
untagged802Dot3(3),
tagggedEth2(4),
tagged802Dot3(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1)."
::= { diffServMacAceEntry 3 }
diffServMacAceSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this object."
::= { diffServMacAceEntry 4 }
diffServMacAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask."
::= { diffServMacAceEntry 5 }
diffServMacAceDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the value of this object."
::= { diffServMacAceEntry 6 }
diffServMacAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask."
::= { diffServMacAceEntry 7 }
diffServMacAceVidOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1)."
::= { diffServMacAceEntry 8 }
diffServMacAceMinVid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3)."
::= { diffServMacAceEntry 9 }
diffServMacAceVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'0FFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask of the VID. The default value is 0."
DEFVAL { 0 }
::= { diffServMacAceEntry 10 }
diffServMacAceEtherTypeOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's ether type is to be compared."
::= { diffServMacAceEntry 12 }
diffServMacAceEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask of Ether type. The default value is 0."
DEFVAL { 0 }
::= { diffServMacAceEntry 13 }
diffServMacAceMinEtherType OBJECT-TYPE
SYNTAX Integer32 ('0000'h..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3)."
::= { diffServMacAceEntry 14 }
diffServMacAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServMacAceEntry 16 }
diffServMacAceCosOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's CoS is compared.
If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing, and
diffServMacAceCosBitmask is used as the bitmask of the CoS value.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos should be used as the lower bound of the CoS value."
::= { diffServMacAceEntry 17 }
diffServMacAceCosBitmask OBJECT-TYPE
SYNTAX INTEGER ('00'h..'07'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the bitmask of the CoS value if the object type of
diffServMacAceCosOp is equal(2). The default value is 0."
::= { diffServMacAceEntry 18 }
diffServMacAceMinCos OBJECT-TYPE
SYNTAX INTEGER ('00'h..'07'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos indicates the lower bound of the CoS value."
::= { diffServMacAceEntry 19 }
diffServActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for action."
::= { diffServMgt 19 }
diffServActionEntry OBJECT-TYPE
SYNTAX DiffServActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for action."
INDEX { diffServActionIndex }
::= { diffServActionTable 1 }
DiffServActionEntry ::= SEQUENCE
{
diffServActionIndex Integer32,
diffServActionList BITS,
diffServActionPktNewPri Integer32,
diffServActionPktNewPhb Integer32,
diffServActionStatus RowStatus,
diffServActionPktNewDscp Integer32
}
diffServActionIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the
action table."
::= { diffServActionEntry 1 }
diffServActionList OBJECT-TYPE
SYNTAX BITS
{
actionPktNewPri(0),
actionPktNewPhb(9),
actionPktNewDscp(11)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri and actionPktNewDscp can not be
enabled at the same time on the entry. The
actionRedPktNewDscp and actionRedDrop can not be
enabled at the same time on the entry."
::= { diffServActionEntry 2 }
diffServActionPktNewPri OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set."
::= { diffServActionEntry 3 }
diffServActionPktNewPhb OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the inner priority value for the packet when
the action is satisfied. If the actionPktNewPhb bit of
the diffServActionList is not enabled, this object can
not be set."
::= { diffServActionEntry 4 }
diffServActionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row
is available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use
by the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically
set to active, making it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management
station wishing to delete all of the instances
associated with an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
or 'active'. That is, when queried, an existing
conceptual row has only three states: it is either
available for use by the managed device (the status column
has the value 'active'); it is not available for use by
the managed device, though the agent has sufficient
information to make it so (the status column has the value
'notInService'); or, it is not available for use by the
managed device, and an attempt to make it so would fail
because the agent has insufficient information (the state
column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServActionEntry 11 }
diffServActionPktNewDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set."
::= { diffServActionEntry 13 }
diffServMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for meter."
::= { diffServMgt 20 }
diffServMeterEntry OBJECT-TYPE
SYNTAX DiffServMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for meter."
INDEX { diffServActionIndex }
::= { diffServMeterTable 1 }
DiffServMeterEntry ::= SEQUENCE
{
diffServMeterIndex Integer32,
diffServMeterModel INTEGER,
diffServMeterRate Integer32,
diffServMeterStatus RowStatus
}
diffServMeterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry that describes a single set of token bucket
parameters."
::= { diffServMeterEntry 1 }
diffServMeterModel OBJECT-TYPE
SYNTAX INTEGER {
default(0),
rate(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown."
::= { diffServMeterEntry 2 }
diffServMeterRate OBJECT-TYPE
SYNTAX Integer32 (16..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The token-bucket rate, in kilobits per second (kbps)."
::= { diffServMeterEntry 3 }
diffServMeterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServMeterEntry 6 }
diffServIpv6AceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServIpv6AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IPv6 ACE."
::= { diffServMgt 21 }
diffServIpv6AceEntry OBJECT-TYPE
SYNTAX DiffServIpv6AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry fo IPv6 ACE."
INDEX { diffServIpv6AceIndex }
::= { diffServIpv6AceTable 1 }
DiffServIpv6AceEntry ::= SEQUENCE
{
diffServIpv6AceIndex Integer32,
diffServIpv6AceType INTEGER,
diffServIpv6AceAccess INTEGER,
diffServIpv6AceSourceIpAddr OCTET STRING,
diffServIpv6AceSourceIpAddrPrefixLen Integer32,
diffServIpv6AceDestIpAddr OCTET STRING,
diffServIpv6AceDestIpAddrPrefixLen Integer32,
diffServIpv6AceNextHeader Integer32,
diffServIpv6AceDscp Integer32,
diffServIpv6AceStatus RowStatus,
diffServIpv6AceSourcePortOp INTEGER,
diffServIpv6AceSourcePort Integer32,
diffServIpv6AceSourcePortBitmask Integer32,
diffServIpv6AceDestPortOp INTEGER,
diffServIpv6AceDestPort Integer32,
diffServIpv6AceDestPortBitmask Integer32
}
diffServIpv6AceIndex OBJECT-TYPE
SYNTAX Integer32(1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the IPv6 table."
::= { diffServIpv6AceEntry 1 }
diffServIpv6AceType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
extended(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified IP v6 ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0."
::= { diffServIpv6AceEntry 2 }
diffServIpv6AceAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this
ACE."
::= { diffServIpv6AceEntry 3 }
diffServIpv6AceSourceIpAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source IPv6 address."
::= { diffServIpv6AceEntry 4 }
diffServIpv6AceSourceIpAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The length (in bits) associated with the source IPv6 address
prefix of this entry."
::= { diffServIpv6AceEntry 5 }
diffServIpv6AceDestIpAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the destination IPv6 address. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1)."
::= { diffServIpv6AceEntry 6 }
diffServIpv6AceDestIpAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The length (in bits) associated with the destination IPv6
address prefix of this entry. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1)."
::= { diffServIpv6AceEntry 7 }
diffServIpv6AceNextHeader OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the next header to match against. This object may not
be modified if the associated diffServIpv6AceType object is equal to
standard(1)."
::= { diffServIpv6AceEntry 8 }
diffServIpv6AceDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the DSCP value to match against. This object may not
be modified if the associated diffServIpv6AceType object is
equal to standard(1)."
::= { diffServIpv6AceEntry 9 }
diffServIpv6AceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServIpv6AceEntry 11 }
diffServIpv6AceSourcePortOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the source
TCP/UDP port number. equal(2), which uses the
diffServIpv6AceSourcePort and diffServIpv6AceSourcePortBitmask
to match against. This object may not be modified if the
associated diffServIpv6AceType object is equal to standard(1)."
::= { diffServIpv6AceEntry 13 }
diffServIpv6AceSourcePort OBJECT-TYPE
SYNTAX Integer32(0..'FFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "If the diffServIpv6AceSourcePortOp is equal(2), this
indicates the TCP/UDP port number value."
::= { diffServIpv6AceEntry 14 }
diffServIpv6AceSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32(0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpv6AceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceSourcePort."
::= { diffServIpv6AceEntry 15 }
diffServIpv6AceDestPortOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which uses the
diffServIpv6AceDestPort and diffServIpv6AceDestPortBitmask to
match against. This object may not be modified if the
associated diffServIpv6AceType object is equal to standard(1)."
::= { diffServIpv6AceEntry 16 }
diffServIpv6AceDestPort OBJECT-TYPE
SYNTAX Integer32(0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpv6AceDestPortOp is equal(2), this
indicates the TCP/UDP port number value."
::= { diffServIpv6AceEntry 17 }
diffServIpv6AceDestPortBitmask OBJECT-TYPE
SYNTAX Integer32(0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpv6AceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceDestPort."
::= { diffServIpv6AceEntry 18 }
diffServArpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServArpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of diffServArpAceEntry."
::= { diffServMgt 23 }
diffServArpAceEntry OBJECT-TYPE
SYNTAX DiffServArpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServArpAceTable."
INDEX { diffServArpAceIndex }
::= { diffServArpAceTable 1 }
DiffServArpAceEntry ::= SEQUENCE
{
diffServArpAceIndex Integer32,
diffServArpAceAction INTEGER,
diffServArpAcePktType INTEGER,
diffServArpAceSourceIpAddr IpAddress,
diffServArpAceSourceIpAddrBitmask IpAddress,
diffServArpAceDestIpAddr IpAddress,
diffServArpAceDestIpAddrBitmask IpAddress,
diffServArpAceSourceMacAddr OCTET STRING,
diffServArpAceSourceMacAddrBitmask OCTET STRING,
diffServArpAceDestMacAddr OCTET STRING,
diffServArpAceDestMacAddrBitmask OCTET STRING,
diffServArpAceLogStatus EnabledStatus,
diffServArpAceStatus RowStatus
}
diffServArpAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { diffServArpAceEntry 1 }
diffServArpAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, diffServArpAceStatus, is
active(1)."
::= { diffServArpAceEntry 2 }
diffServArpAcePktType OBJECT-TYPE
SYNTAX INTEGER
{
request(1),
response(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 3 }
diffServArpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source ARP address. The packet's source
address is AND'ed with the value of
diffServArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 4 }
diffServArpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source ARP address mask. The packet's
destination address is AND'ed with the value of
diffServArpAceSourceIpAddr and then compared against the
value of this object."
::= { diffServArpAceEntry 5 }
diffServArpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address. The packet's
destination address is AND'ed with the value of
diffServArpAceDestIpAddrBitmask and then compared
against the value of this object."
::= { diffServArpAceEntry 6 }
diffServArpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask."
::= { diffServArpAceEntry 7 }
diffServArpAceSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this object. This object cannot be
configured when the status of the entry,
diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 8 }
diffServArpAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 9 }
diffServArpAceDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of this object. This object cannot be
configured when the status of the entry,
diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 10 }
diffServArpAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 11 }
diffServArpAceLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 12 }
diffServArpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServArpAceEntry 13 }
diffServArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of diffServArpEntry."
::= { diffServMgt 24 }
diffServArpEntry OBJECT-TYPE
SYNTAX DiffServArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServArpTable."
INDEX { diffServArpAclName }
::= { diffServArpTable 1 }
DiffServArpEntry ::= SEQUENCE
{
diffServArpAclName DisplayString
}
diffServArpAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique name is
used to identify the list to which the entry belongs
in the device."
::= { diffServArpEntry 1 }
diffServAclHwCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServAclHwCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for differentiated services hardware counter on
each port."
::= { diffServMgt 26 }
diffServAclHwCounterEntry OBJECT-TYPE
SYNTAX DiffServAclHwCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for differentiated services hardware counter on
each port."
INDEX {
diffServAclHwCounterIfIndex,
diffServAclHwCounterDirection,
diffServAclHwCounterAclIndex,
diffServAclHwCounterAceIndex
}
::= { diffServAclHwCounterTable 1 }
DiffServAclHwCounterEntry ::= SEQUENCE
{
diffServAclHwCounterIfIndex InterfaceIndex,
diffServAclHwCounterDirection INTEGER,
diffServAclHwCounterAclIndex Integer32,
diffServAclHwCounterAceIndex Integer32,
diffServAclHwCounterAceHitCount Unsigned32
}
diffServAclHwCounterIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is the interface index of diffServPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { diffServAclHwCounterEntry 1 }
diffServAclHwCounterDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates a particular direction of traffic."
::= { diffServAclHwCounterEntry 2 }
diffServAclHwCounterAclIndex OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the ACL
table."
::= { diffServAclHwCounterEntry 3 }
diffServAclHwCounterAceIndex OBJECT-TYPE
SYNTAX Integer32 (0..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An index that uniquely identifies an entry of an ACL.
This entry might be a compressed ACE (which index is
bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with
multiple user configured ACEs, and the index of
compressed ACE will not show in ACE table."
::= { diffServAclHwCounterEntry 4 }
diffServAclHwCounterAceHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the hardware counter of an ACE entry."
::= { diffServAclHwCounterEntry 5 }
--
-- diffServPolicyMapPortTable
--
diffServPolicyMapPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServPolicyMapPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for policy map of each port."
::= { diffServMgt 27 }
diffServPolicyMapPortEntry OBJECT-TYPE
SYNTAX DiffServPolicyMapPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for diffServPolicyMapPortTable."
INDEX {
diffServPolicyMapPortIfIndex,
diffServPolicyMapPortDirection
}
::= { diffServPolicyMapPortTable 1 }
DiffServPolicyMapPortEntry ::= SEQUENCE
{
diffServPolicyMapPortIfIndex InterfaceIndex,
diffServPolicyMapPortDirection INTEGER,
diffServPolicyMapPortPolicyMapIndex Integer32,
diffServPolicyMapPortStatus RowStatus
}
diffServPolicyMapPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object is the interface index of DiffServPolicyMapPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { diffServPolicyMapPortEntry 1 }
diffServPolicyMapPortDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates this policy map effect to
which direction of traffic."
::= { diffServPolicyMapPortEntry 2 }
diffServPolicyMapPortPolicyMapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the policy map index binded to the interface.
The policy map identified by a particular value of
this index is associated with the same DiffServPolicyMapEntry
as identified by the same value of diffServPolicyMapIndex."
::= { diffServPolicyMapPortEntry 3 }
diffServPolicyMapPortStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.
"
::= { diffServPolicyMapPortEntry 4 }
--
-- diffServAccessGroupTable
--
diffServAccessGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServAccessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for specifies access group
for ACL on each port."
::= { diffServMgt 28 }
diffServAccessGroupEntry OBJECT-TYPE
SYNTAX DiffServAccessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for diffServAccessGroupTable."
INDEX {
diffServAccessGroupIfIndex,
diffServAccessGroupDirection,
diffServAccessGroupType
}
::= { diffServAccessGroupTable 1 }
DiffServAccessGroupEntry ::= SEQUENCE
{
diffServAccessGroupIfIndex InterfaceIndex,
diffServAccessGroupDirection INTEGER,
diffServAccessGroupType INTEGER,
diffServAccessGroupAclIndex Integer32,
diffServAccessGroupTimeRangeName DisplayString,
diffServAccessGroupCounterStatus EnabledStatus,
diffServAccessGroupStatus RowStatus
}
diffServAccessGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object is the interface index of diffServAccessGroupEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB. If support global ACL,
using the specific ifindex(65535)."
::= { diffServAccessGroupEntry 1 }
diffServAccessGroupDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates this access group effect to
which direction of traffic."
::= { diffServAccessGroupEntry 2 }
diffServAccessGroupType OBJECT-TYPE
SYNTAX INTEGER {
mac(1),
ip(2),
ipv6(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the access group type,
only support bind one ACL per type on a port."
::= { diffServAccessGroupEntry 3 }
diffServAccessGroupAclIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ACL index apply to this access
group. The index uniquely identifies an
entry in diffServAclTable."
::= { diffServAccessGroupEntry 4 }
diffServAccessGroupTimeRangeName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time range entry bound to
the access group. This object should be
equal to one of the timeRangeName objects
in timeRangeTable."
::= { diffServAccessGroupEntry 5 }
diffServAccessGroupCounterStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The acl counter enable status of this
access group."
::= { diffServAccessGroupEntry 6 }
diffServAccessGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.
"
::= { diffServAccessGroupEntry 7 }
diffServTcamTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServTcamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of DiffServTcamEntry."
::= { diffServMgt 29 }
diffServTcamEntry OBJECT-TYPE
SYNTAX DiffServTcamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServTcamTable."
INDEX {
diffServTcamUnit,
diffServTcamDevice,
diffServTcamPool
}
::= { diffServTcamTable 1 }
DiffServTcamEntry ::= SEQUENCE
{
diffServTcamUnit Integer32,
diffServTcamDevice Integer32,
diffServTcamPool Integer32,
diffServTcamPoolCapability BITS,
diffServTcamTotal Integer32,
diffServTcamFree Integer32,
diffServTcamUsed Integer32
}
diffServTcamUnit OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information."
::= { diffServTcamEntry 1 }
diffServTcamDevice OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The device id of the specified unit."
::= { diffServTcamEntry 2 }
diffServTcamPool OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The TCAM pool index of the specified unit and device."
::= { diffServTcamEntry 3 }
diffServTcamPoolCapability OBJECT-TYPE
SYNTAX BITS
{
macAcl(0),
ipAcl(1),
ipv6StdAcl(2),
ipv6ExtAcl(3),
macDiffServ(4),
ipDiffServ(5),
ipv6StdDiffServ(6),
ipv6ExtDiffServ(7),
egressMacAcl(8),
egressIpAcl(9),
egressIpv6StdAcl(10),
egressIpv6ExtAcl(11),
egressMacDiffServ(12),
egressIpDiffServ(13),
egressIpv6StdDiffServ(14),
egressIpv6ExtDiffServ(15),
webAuth(16),
ipSourceGuard(17),
ipv6SourceGuard(18),
cpuInterface(19),
rateLimit(20),
linkLocal(21),
reserved(22)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bitmap value used to identify which functions
supported on this pool."
::= { diffServTcamEntry 4 }
diffServTcamTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of TCAM pool entry."
::= { diffServTcamEntry 5 }
diffServTcamFree OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The free number of TCAM pool entry."
::= { diffServTcamEntry 6 }
diffServTcamUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The used number of TCAM pool entry."
::= { diffServTcamEntry 7 }
--
-- securityMgt
--
-- Management for security, e.g. user security and port security.
privateVlanMgt OBJECT IDENTIFIER ::= { securityMgt 1 }
portSecurityMgt OBJECT IDENTIFIER ::= { securityMgt 2 }
radiusMgt OBJECT IDENTIFIER ::= { securityMgt 4 }
tacacsMgt OBJECT IDENTIFIER ::= { securityMgt 5 }
sshMgt OBJECT IDENTIFIER ::= { securityMgt 6 }
ipFilterMgt OBJECT IDENTIFIER ::= { securityMgt 9 }
userAuthMgt OBJECT IDENTIFIER ::= { securityMgt 10 }
dot1xMgt OBJECT IDENTIFIER ::= { securityMgt 11 }
aaaMgt OBJECT IDENTIFIER ::= { securityMgt 12 }
networkAccessMgt OBJECT IDENTIFIER ::= { securityMgt 13 }
dosMgt OBJECT IDENTIFIER ::= { securityMgt 16 }
--
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) start
privateVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This controls whether private VLAN is enabled."
::= { privateVlanMgt 1 }
privateVlanUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of uplink ports for private VLAN.
They should not overlap with privateVlanDownlinkPorts.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 2 }
privateVlanDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of downlink ports for private VLAN.
They should not overlap with privateVlanUplinkPorts.
Multiple port setting is permitted.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 3 }
privateVlanVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing private VLAN information on the
VLANs which currently exist."
::= { privateVlanMgt 4 }
privateVlanVlanEntry OBJECT-TYPE
SYNTAX PrivateVlanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the private VLAN
information on the VLANs for a particular management
domain."
INDEX { privateVlanVlanIndex }
::= { privateVlanVlanTable 1 }
PrivateVlanVlanEntry ::= SEQUENCE
{
privateVlanVlanIndex Integer32,
privateVlanVlanType INTEGER,
privateVlanAssoicatedPrimaryVlan Integer32
}
privateVlanVlanIndex OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The VLAN ID of this private VLAN."
::= { privateVlanVlanEntry 1 }
privateVlanVlanType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
primary(2),
isolated(3),
community(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The VLAN type as defined for Private VLAN feature.
Set the value to invalid(1) to destroy an entry. Set
other values to create an entry. If an index
already exists, set others to modifiy it. Note that a VLAN's
private VLAN type cannot be changed once it has
any port members."
::= { privateVlanVlanEntry 2 }
privateVlanAssoicatedPrimaryVlan OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN ID of the associated primary VLAN used for
the private VLAN feature if privateVlanVlanType has the
value of isolated(3), community(4). If privateVlanVlanType
has the value of primary(2), then this object has the value of 0.
Note that one isolated VLAN can only be associated
with one unique primary VLAN. One primary VLAN can only
be associated with one isolated VLAN.
One primary VLAN can be associated with multiple community VLANs;
one community VLAN can only be associated with one unique primary VLAN."
::= { privateVlanVlanEntry 3 }
--
-- Table for configuring secondary VLAN on private ports
--
privateVlanPrivatePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanPrivatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on the configuration of
secondary VLANs on the device ports."
::= { privateVlanMgt 5 }
privateVlanPrivatePortEntry OBJECT-TYPE
SYNTAX PrivateVlanPrivatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feature."
INDEX { privateVlanPrivatePortIfIndex }
::= { privateVlanPrivatePortTable 1 }
PrivateVlanPrivatePortEntry ::= SEQUENCE
{
privateVlanPrivatePortIfIndex InterfaceIndex,
privateVlanPrivatePortSecondaryVlan Integer32
}
privateVlanPrivatePortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as the ifIndex."
::= { privateVlanPrivatePortEntry 1 }
privateVlanPrivatePortSecondaryVlan OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID of the secondary VLAN configured on this
private port. A private port is a port that allows
ingress traffic of the secondary VLAN as well as
egress traffic of its associated primary VLAN, but
blocks the egress traffic of the isolated VLAN while
allowing the egress traffic of the community
or twoWayCommunity VLAN depending on the type of the
secondary VLAN.
Note that a port can join a secondary VLAN only after
this secondary VLAN has been associated with a primary
VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a
non-zero value. The default value of 0 for this object
means this port has not yet joined a secondary VLAN."
DEFVAL { 0 }
::= { privateVlanPrivatePortEntry 2 }
--
-- Table for remapping secondary VLAN to primary VLAN on promiscuous
-- ports for Private VLAN feature
--
privateVlanPromPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanPromPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing secondary VLAN to primary VLAN remapping
information on ports of the device."
::= { privateVlanMgt 6 }
privateVlanPromPortEntry OBJECT-TYPE
SYNTAX PrivateVlanPromPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
private VLAN feature."
INDEX { privateVlanPromPortIfIndex }
::= { privateVlanPromPortTable 1 }
PrivateVlanPromPortEntry ::= SEQUENCE
{
privateVlanPromPortIfIndex InterfaceIndex,
privateVlanPromPortPrimaryVlanId Integer32,
privateVlanPromPortSecondaryRemap OCTET STRING,
privateVlanPromPortSecondaryRemap2k OCTET STRING,
privateVlanPromPortSecondaryRemap3k OCTET STRING,
privateVlanPromPortSecondaryRemap4k OCTET STRING
}
privateVlanPromPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as ifIndex."
::= { privateVlanPromPortEntry 1 }
privateVlanPromPortPrimaryVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The primary VLAN ID of the promiscous port."
::= { privateVlanPromPortEntry 2 }
privateVlanPromPortSecondaryRemap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN in the
management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 0
through 7; the second octet to VLANs 8 through 15; etc.
The most significant bit of each octet corresponds to
the lowest value VlanIndexOrZero in that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs."
::= { privateVlanPromPortEntry 3 }
privateVlanPromPortSecondaryRemap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 1024 through 2047
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 1024
through 1031; the second octet to VLANs 1032 through
1039; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { privateVlanPromPortEntry 4 }
privateVlanPromPortSecondaryRemap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 2048 through 3071
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 2048
through 2055; the second octet to VLANs 2056 through
2063; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { privateVlanPromPortEntry 5 }
privateVlanPromPortSecondaryRemap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 3072 through 4095
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 3072
through 3079; the second octet to VLANs 3080 through
3087; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { privateVlanPromPortEntry 6 }
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) end
privateVlanSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings for private VLAN Session."
::= { privateVlanMgt 8 }
privateVlanSessionEntry OBJECT-TYPE
SYNTAX PrivateVlanSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the privateVlanSession table."
INDEX { privateVlanSessionId }
::= { privateVlanSessionTable 1 }
PrivateVlanSessionEntry::= SEQUENCE
{
privateVlanSessionId INTEGER,
privateVlanSessionUplinkPorts PortList,
privateVlanSessionDownlinkPorts PortList,
privateVlanSessionStatus ValidStatus
}
privateVlanSessionId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The session ID that may specifiy certain entry in the table which contains private
VLAN session information."
::= { privateVlanSessionEntry 1 }
privateVlanSessionUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This is the list of uplink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortDownlink of the same session, and they
also should not overlap with the privateVlanSessionPortUplink and the
privateVlanSessionPortDownlink of other session."
::= { privateVlanSessionEntry 2 }
privateVlanSessionDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This is the list of downlink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortUplink of the same session, and they also
should not overlap with the privateVlanSessionPortUplink and the
privateVlanSessionPortDownlink of other session."
::= { privateVlanSessionEntry 3 }
privateVlanSessionStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Sets this to
invalid(2) to destroy an entry."
::= { privateVlanSessionEntry 4 }
privateVlanUplinkToUplink OBJECT-TYPE
SYNTAX INTEGER
{
blocking(1),
forwarding(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets this to blocking(2) to deny the traffic of uplink
ports between different sessions. Set this to forwarding(1)
to allow the traffic of uplink ports between different
sessions."
::= { privateVlanMgt 9 }
portSecPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port security(MAC binding) Table."
::= { portSecurityMgt 1 }
portSecPortEntry OBJECT-TYPE
SYNTAX PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of portSecPortTable."
INDEX { portSecPortIndex }
::= { portSecPortTable 1 }
PortSecPortEntry ::= SEQUENCE
{
portSecPortIndex InterfaceIndex,
portSecPortStatus EnabledStatus,
portSecAction INTEGER,
portSecMaxMacCount Integer32
}
portSecPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portSecPortEntry 1 }
portSecPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable port security and set disabled(2) to
disable port security."
::= { portSecPortEntry 2 }
portSecAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
trap(2),
shutdown(3),
trapAndShutdown(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be sent,
when this variable is set to shutdown(3), the port will
shutdown, when this variable is set to
trapAndShutdown(4), a swPortSecurityTrap will be sent
and the port will shutdown."
::= { portSecPortEntry 3 }
portSecMaxMacCount OBJECT-TYPE
SYNTAX Integer32(0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the number of MAC has reached
this value, and only the secure MAC addresses can enter
this port. If the portSecPortStatus is disabled, we will begin
to learn the MAC, and auto enabled the portSecPortStatus when
the MAC has reached this value."
::= { portSecPortEntry 4 }
--
-- portSecMacAsPermanentMgt
--
portSecMacAsPermanentMgt OBJECT IDENTIFIER ::= { portSecurityMgt 6 }
portSecMacAsPermanentPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. Specifies the interface to
convert the learnt secured MAC address into manual configured.
'0' represents that no interface is specified."
::= { portSecMacAsPermanentMgt 1 }
portSecMacAsPermanentAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction (1),
action (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set action(2) to convert the learnt secured MAC address into
manual configured. When action finsh or no action, the value
of this object is noAction(1)."
::= { portSecMacAsPermanentMgt 2 }
--
-- radiusMgt
--
-- Management for Remote Authentication Dial-In User Service (RADIUS).
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS=1: single server
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS>1: multiple server
radiusServerGlobalAuthPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Aauthentication port number for RADIUS server.
When specified radius server do not set
aauthentication port number, this value is used."
::= { radiusMgt 1 }
radiusServerGlobalAcctPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Accounting port number of RADIUS server.
When specified radius server do not set
accounting port number, this value is used."
::= { radiusMgt 2 }
radiusServerGlobalKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.
When specified radius server do not set
key, this this value is used."
::= { radiusMgt 3 }
radiusServerGlobalRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Maximum number of retransmissions for RADIUS.
When specified radius server do not set
maximum number of retransmissions, this value is used."
::= { radiusMgt 4 }
radiusServerGlobalTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS.
When specified radius server do not set
timeout, this value is used."
::= { radiusMgt 5 }
--radiusServerTable
radiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for RADIUS server."
::= { radiusMgt 7 }
radiusServerEntry OBJECT-TYPE
SYNTAX RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for radiusServerTable."
INDEX { radiusServerIndex }
::= { radiusServerTable 1 }
RadiusServerEntry ::= SEQUENCE
{
radiusServerIndex Integer32,
radiusServerAddress IpAddress,
radiusServerAuthPortNumber Integer32,
radiusServerAcctPortNumber Integer32,
radiusServerKey DisplayString,
radiusServerRetransmit Integer32,
radiusServerTimeout Integer32,
radiusServerStatus ValidStatus
}
radiusServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The RADIUS server index in the table."
::= { radiusServerEntry 1 }
radiusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a RADIUS server."
::= { radiusServerEntry 2 }
radiusServerAuthPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Authentication port number of RADIUS server."
::= { radiusServerEntry 3 }
radiusServerAcctPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Accounting port number of RADIUS server."
::= { radiusServerEntry 4 }
radiusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string."
::= { radiusServerEntry 5 }
radiusServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusServerEntry 6 }
radiusServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusServerEntry 7 }
radiusServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { radiusServerEntry 8 }
--
-- tacacsMgt
--
-- Management for Terminal Access Controller Access Control System plus (TACACS+).
-- Global server setting
tacacsPlusServerGlobalPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP port number of TACACS+ server.
When specified TACACS+ server do not set
TCP port number, this this value is used."
::= { tacacsMgt 2 }
tacacsPlusServerGlobalKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This variable
can only be set. When this variable is read, it always returns a
zero-length string.When specified TACACS+ server do not set
the encryption key , this this value is used."
::= { tacacsMgt 3 }
tacacsPlusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TacacsPlusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for TACACS+ server."
::= { tacacsMgt 4 }
tacacsPlusServerEntry OBJECT-TYPE
SYNTAX TacacsPlusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for tacacsPlusServerTable."
INDEX { tacacsPlusServerIndex }
::= { tacacsPlusServerTable 1 }
TacacsPlusServerEntry ::= SEQUENCE
{
tacacsPlusServerIndex Integer32,
tacacsPlusServerAddress IpAddress,
tacacsPlusServerPortNumber Integer32,
tacacsPlusServerKey DisplayString,
tacacsPlusServerStatus ValidStatus
}
tacacsPlusServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TACACS+ server index."
::= { tacacsPlusServerEntry 1 }
tacacsPlusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a TACACS+ server."
::= { tacacsPlusServerEntry 2 }
tacacsPlusServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TCP port number of a TACACS+ server."
::= { tacacsPlusServerEntry 3 }
tacacsPlusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string."
::= { tacacsPlusServerEntry 4 }
tacacsPlusServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { tacacsPlusServerEntry 8 }
--
-- sshMgt
--
-- Management for Secure Shell Configuration
sshServerStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of Secure Shell Server. Set this value to
enabled(1) to enable SSH server, set this value to
disabled(2) to disable the SSH server."
::= { sshMgt 1 }
sshServerMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The major version of the SSH Server."
::= { sshMgt 2 }
sshServerMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minor version of the SSH Server."
::= { sshMgt 3 }
sshTimeout OBJECT-TYPE
SYNTAX INTEGER(1..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time interval that the router waits for the SSH
client to respond. The range is 1-120."
::= { sshMgt 4 }
sshAuthRetries OBJECT-TYPE
SYNTAX INTEGER(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of attempts after which the interface is reset.
The range is 1-5."
::= { sshMgt 5 }
sshConnInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for Secure Shell Connection."
::= { sshMgt 6 }
sshConnInfoEntry OBJECT-TYPE
SYNTAX SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshConnInfoTable."
INDEX { sshConnID }
::= { sshConnInfoTable 1 }
SshConnInfoEntry ::= SEQUENCE
{
--both sshv1 & sshv2 start
sshConnID Integer32,
sshConnMajorVersion Integer32,
sshConnMinorVersion Integer32,
sshConnStatus INTEGER,
--both sshv1 & sshv2 end
--sshv1 only start
--sshConnEncryptionType INTEGER,
--sshv1 only end
--both sshv1 & sshv2 start
sshConnUserName DisplayString,
sshDisconnect INTEGER,
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr DisplayString
--sshv2 only end
}
--both sshv1 & sshv2 start
sshConnID OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The connection ID of the Secure Shell Connection."
::= { sshConnInfoEntry 1 }
sshConnMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH major version."
::= { sshConnInfoEntry 2 }
sshConnMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH minor version."
::= { sshConnInfoEntry 3 }
sshConnStatus OBJECT-TYPE
SYNTAX INTEGER
{
negotiationStart(1),
authenticationStart(2),
sessionStart(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start State."
::= { sshConnInfoEntry 5 }
--both sshv1 & sshv2 end
--both sshv1 & sshv2 start
sshConnUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user name of the connection."
::= { sshConnInfoEntry 6 }
sshDisconnect OBJECT-TYPE
SYNTAX INTEGER
{
noDisconnect(1),
disconnect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable."
::= { sshConnInfoEntry 7 }
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption type of the SSH."
::= { sshConnInfoEntry 8 }
sshKeySize OBJECT-TYPE
SYNTAX INTEGER(512..896)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SSH server key size."
::= { sshMgt 7 }
sshRsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 1."
::= { sshMgt 8 }
sshRsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 2."
::= { sshMgt 9 }
sshRsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 3."
::= { sshMgt 10 }
sshRsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 4."
::= { sshMgt 11 }
sshRsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 5."
::= { sshMgt 12 }
sshRsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 6."
::= { sshMgt 13 }
sshRsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 7."
::= { sshMgt 14 }
sshRsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 8."
::= { sshMgt 15 }
sshDsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 1."
::= { sshMgt 16 }
sshDsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 2."
::= { sshMgt 17 }
sshDsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 3."
::= { sshMgt 18 }
sshDsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 4."
::= { sshMgt 19 }
sshDsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 5."
::= { sshMgt 20 }
sshDsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 6."
::= { sshMgt 21 }
sshDsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 7."
::= { sshMgt 22 }
sshDsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 8."
::= { sshMgt 23 }
sshHostKeyGenAction OBJECT-TYPE
SYNTAX INTEGER
{
noGen(1),
genRsaKey(2),
genDsaKey(3),
genBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is for host key generating.
For the set behavior:
Set it to genRsaKey(2) to generate the RSA host key,
and to genDsaKey(3) to generate the DSA host key,
if genBothKeys(4) is set, both RSA and DSA host key are
generated.
For the get behavior:
You will get genRsaKey(2), genDsaKey(3) or
genBothKeys(4) when the key gen action is in progress.
otherwise, you will get noGen(1)."
::= { sshMgt 24 }
sshHostKeyGenStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last KeyGen status.
if no key gen action has been performed.
you will get unknown(1) status."
::= { sshMgt 25 }
sshHostKeySaveAction OBJECT-TYPE
SYNTAX INTEGER
{
noSave(1),
save(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To save host key from memory to flash.
For the set behavior:
Set it to save(2) to perform the save operation.
For the get behavior:
You will get save(1) when the save action is in progress.
Otherwise, you will get noSave(1)."
::= { sshMgt 26 }
sshHostKeySaveStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last savekey status.
If no save action has been performed,
you will get unknown(1) status."
::= { sshMgt 27 }
sshHostKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the host key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA host key,
to delDsaKey(3) to delete the DSA host key,
or to delBothKeys(4) to delete both RSA and DSA host key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshMgt 28 }
sshUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of sshUserEntry."
::= { sshMgt 29 }
sshUserEntry OBJECT-TYPE
SYNTAX SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshUserTable."
INDEX { IMPLIED sshUserName}
::= { sshUserTable 1 }
SshUserEntry ::= SEQUENCE
{
sshUserName DisplayString,
sshUserRsaKey1 KeySegment,
sshUserRsaKey2 KeySegment,
sshUserRsaKey3 KeySegment,
sshUserRsaKey4 KeySegment,
sshUserRsaKey5 KeySegment,
sshUserRsaKey6 KeySegment,
sshUserRsaKey7 KeySegment,
sshUserRsaKey8 KeySegment,
sshUserDsaKey1 KeySegment,
sshUserDsaKey2 KeySegment,
sshUserDsaKey3 KeySegment,
sshUserDsaKey4 KeySegment,
sshUserDsaKey5 KeySegment,
sshUserDsaKey6 KeySegment,
sshUserDsaKey7 KeySegment,
sshUserDsaKey8 KeySegment,
sshUserKeyDelAction INTEGER
}
sshUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User Name."
::= { sshUserEntry 1 }
sshUserRsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 1."
::= { sshUserEntry 2 }
sshUserRsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 2."
::= { sshUserEntry 3 }
sshUserRsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 3."
::= { sshUserEntry 4 }
sshUserRsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 4."
::= { sshUserEntry 5 }
sshUserRsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 5."
::= { sshUserEntry 6 }
sshUserRsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 6."
::= { sshUserEntry 7 }
sshUserRsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 7."
::= { sshUserEntry 8 }
sshUserRsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 8."
::= { sshUserEntry 9 }
sshUserDsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 1."
::= { sshUserEntry 10 }
sshUserDsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 2."
::= { sshUserEntry 11 }
sshUserDsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 3."
::= { sshUserEntry 12 }
sshUserDsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 4."
::= { sshUserEntry 13 }
sshUserDsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 5."
::= { sshUserEntry 14 }
sshUserDsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 6."
::= { sshUserEntry 15 }
sshUserDsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 7."
::= { sshUserEntry 16 }
sshUserDsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 8."
::= { sshUserEntry 17 }
sshUserKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the user key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshUserEntry 18 }
sshRsaHostKeySHA1FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SHA1 finger print of the RSA host key."
::= { sshMgt 30 }
sshRsaHostKeyMD5FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MD5 finger print of RSA host key."
::= { sshMgt 31 }
sshDsaHostKeySHA1FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SHA1 finger print of the DSA host key."
::= { sshMgt 32 }
sshDsaHostKeyMD5FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MD5 finger print of the DSA host key."
::= { sshMgt 33 }
--sshv2 only end
--
-- aaaMgt
--
aaaMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings needed for accounting."
::= { aaaMgt 1 }
aaaMethodEntry OBJECT-TYPE
SYNTAX AaaMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the aaaMethodTable."
INDEX { aaaMethodIndex }
::= { aaaMethodTable 1 }
AaaMethodEntry ::= SEQUENCE {
aaaMethodIndex Integer32,
aaaMethodName DisplayString,
aaaMethodGroupName DisplayString,
aaaMethodMode INTEGER,
aaaMethodStatus ValidStatus,
aaaMethodClientType INTEGER,
aaaMethodPrivilegeLevel INTEGER
}
aaaMethodIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaMethodEntry 1 }
aaaMethodName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name for the method."
::= { aaaMethodEntry 2 }
aaaMethodGroupName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName."
::= { aaaMethodEntry 3 }
aaaMethodMode OBJECT-TYPE
SYNTAX INTEGER
{
start-stop(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "start-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process begins regardless of whether or not
the 'start' accounting notice was received by the accounting server."
::= { aaaMethodEntry 4 }
aaaMethodStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaMethodTable, 2 to destroy the table."
::= { aaaMethodEntry 5 }
aaaMethodClientType OBJECT-TYPE
SYNTAX INTEGER
{
dot1x(1), exec(2), commands(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "dot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console; commands(3): Provides
accounting service for command privileges."
::= { aaaMethodEntry 6 }
aaaMethodPrivilegeLevel OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the privilege level for the entry.
When aaaMethodClientType is in the mode of command(3),
the privilege level is enabled to be accessed."
::= { aaaMethodEntry 7 }
aaaRadiusGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaRadiusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Uses a subset of RADIUS servers for accounting as defined by the server group"
::= { aaaMgt 2 }
aaaRadiusGroupEntry OBJECT-TYPE
SYNTAX AaaRadiusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaRadiusGroupEntry."
INDEX { aaaRadiusGroupIndex }
::= { aaaRadiusGroupTable 1 }
AaaRadiusGroupEntry ::= SEQUENCE
{
aaaRadiusGroupIndex Integer32,
aaaRadiusGroupServerBitMap OCTET STRING,
aaaRadiusGroupName DisplayString,
aaaRadiusGroupStatus ValidStatus
}
aaaRadiusGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaRadiusGroupEntry 1 }
aaaRadiusGroupServerBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Identifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2."
::= { aaaRadiusGroupEntry 2 }
aaaRadiusGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Uses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed."
::= { aaaRadiusGroupEntry 3 }
aaaRadiusGroupStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaRadiusGroupEntry 4 }
aaaTacacsPlusGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaTacacsPlusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Uses a subset of TACACS+ servers for accounting as defined by the server group"
::= { aaaMgt 3 }
aaaTacacsPlusGroupEntry OBJECT-TYPE
SYNTAX AaaTacacsPlusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaTacacsPlusGroupEntry."
INDEX { aaaTacacsPlusGroupIndex }
::= { aaaTacacsPlusGroupTable 1 }
AaaTacacsPlusGroupEntry ::= SEQUENCE
{
aaaTacacsPlusGroupIndex Integer32,
aaaTacacsPlusGroupServerBitMap OCTET STRING,
aaaTacacsPlusGroupName DisplayString,
aaaTacacsPlusGroupStatus ValidStatus
}
aaaTacacsPlusGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaTacacsPlusGroupEntry 1 }
aaaTacacsPlusGroupServerBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Identifies which TACACS+ sever to use."
::= { aaaTacacsPlusGroupEntry 2 }
aaaTacacsPlusGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Uses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupName"
::= { aaaTacacsPlusGroupEntry 3 }
aaaTacacsPlusGroupStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaTacacsPlusGroupEntry 4 }
aaaUpdate OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the periodic interim accounting records to be sent
to the accounting server and periodic intervals to send accounting update records(in minutes)."
::= { aaaMgt 4 }
aaaAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies an interface or a set of interfaces that the
accounting method list will be applied to."
::= { aaaMgt 5 }
aaaAccountEntry OBJECT-TYPE
SYNTAX AaaAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaAccountTable."
INDEX { aaaAccountIfIndex }
::= { aaaAccountTable 1 }
AaaAccountEntry ::= SEQUENCE {
aaaAccountIfIndex InterfaceIndex,
aaaAccountMethodName DisplayString,
aaaAccountProtocol INTEGER,
aaaAccountStatus ValidStatus
}
aaaAccountIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defined as the ifIndex"
::= { aaaAccountEntry 1 }
aaaAccountMethodName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default."
::= { aaaAccountEntry 2 }
aaaAccountProtocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use."
::= { aaaAccountEntry 3 }
aaaAccountStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaAccountEntry 4 }
aaaCommandPrivilegesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaCommandPrivilegesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings needed for command privileges."
::= { aaaMgt 8 }
aaaCommandPrivilegesEntry OBJECT-TYPE
SYNTAX AaaCommandPrivilegesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the aaaCommandPrivilegesTable."
INDEX { aaaCommandPrivilegesLevel, aaaCommandPrivilegesInterfaceIndex }
::= { aaaCommandPrivilegesTable 1 }
AaaCommandPrivilegesEntry ::= SEQUENCE {
aaaCommandPrivilegesLevel INTEGER,
aaaCommandPrivilegesInterfaceIndex INTEGER,
aaaCommandPrivilegesMethodName DisplayString
}
aaaCommandPrivilegesLevel OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the privilege level index for the entry."
::= { aaaCommandPrivilegesEntry 1 }
aaaCommandPrivilegesInterfaceIndex OBJECT-TYPE
SYNTAX INTEGER { console(1), vty(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the interface index for the entry."
::= { aaaCommandPrivilegesEntry 2 }
aaaCommandPrivilegesMethodName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the method name in the lists under
the mode of command privileges."
::= { aaaCommandPrivilegesEntry 3 }
aaaAccExecTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaAccExecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies an interface or a set of interfaces that the
accounting method list will be applied to."
::= { aaaMgt 9 }
aaaAccExecEntry OBJECT-TYPE
SYNTAX AaaAccExecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaAccExecTable."
INDEX { aaaAccExecIndex }
::= { aaaAccExecTable 1 }
AaaAccExecEntry ::= SEQUENCE {
aaaAccExecIndex INTEGER,
aaaAccExecMethodName DisplayString
}
aaaAccExecIndex OBJECT-TYPE
SYNTAX INTEGER
{
console(1), vty(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The method of accessing CLI management."
::= { aaaAccExecEntry 1 }
aaaAccExecMethodName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default."
::= { aaaAccExecEntry 2 }
--
--userAuthMgt
--
userAuthEnablePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enable password or delete enable password. NULL is used to
delete the enable password. The password is starting with
alphanumeric."
::= { userAuthMgt 3 }
userAuthMethod OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
localradius(2),
localradiustacacs(3),
localtacacs(4),
localtacacsradius(5),
radius(6),
radiuslocal(7),
radiuslocaltacacs(8),
radiustacacs(9),
radiustacacslocal(10),
tacacs(11),
tacacslocal(12),
tacacslocalradius(13),
tacacsradius(14),
tacacsradiuslocal(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set user authencation method for system."
::= { userAuthMgt 4 }
userAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for creating the new user."
::= { userAuthMgt 5 }
userAuthEntry OBJECT-TYPE
SYNTAX UserAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries in this table correspond to the users entries in system."
INDEX { userAuthUserName }
::= { userAuthTable 1 }
UserAuthEntry ::=
SEQUENCE {
userAuthUserName
DisplayString,
userAuthPassword
DisplayString,
userAuthPrivilege
Integer32,
userAuthPublicKey
DisplayString,
userAuthStatus
Integer32
}
userAuthUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the user. The user name is starting with alphanumeric."
::= { userAuthEntry 1 }
userAuthPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the user password. zero length input will set the user enrty
without password. If the user is not exist, it will create the user
with the giving password and privilege 0. The password is starting
with alphanumeric."
::= { userAuthEntry 2 }
userAuthPrivilege OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the user level. If the user does not exist, it will create
the user with the given privilege and no password. Privilege 15
indicates system administrator, privilege 0 indicates guest user."
::= { userAuthEntry 3 }
userAuthPublicKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'."
::= { userAuthEntry 4 }
userAuthStatus OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to create the user entry by '1' and to delete one
user entry by '0'."
::= { userAuthEntry 5 }
--
-- ipFilterMgt
--
--ipFilterSnmpInetTable
ipFilterSnmpInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterSnmpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 12 }
ipFilterSnmpInetEntry OBJECT-TYPE
SYNTAX IpFilterSnmpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterSnmpInetAddressType,
IMPLIED ipFilterSnmpInetAddressStart}
::= { ipFilterSnmpInetTable 1 }
IpFilterSnmpInetEntry ::= SEQUENCE {
ipFilterSnmpInetAddressType InetAddressType,
ipFilterSnmpInetAddressStart InetAddress,
ipFilterSnmpInetAddressEnd InetAddress,
ipFilterSnmpInetStatus ValidStatus
}
ipFilterSnmpInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of IP address filter.
Only supports IPv4 and IPv6 address types."
::= { ipFilterSnmpInetEntry 1 }
ipFilterSnmpInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterSnmpInetEntry 2 }
ipFilterSnmpInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterSnmpInetEntry 3 }
ipFilterSnmpInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterSnmpInetEntry 4 }
--ipFilterHttpInetTable
ipFilterHttpInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterHttpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 13 }
ipFilterHttpInetEntry OBJECT-TYPE
SYNTAX IpFilterHttpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterHttpInetAddressType,
IMPLIED ipFilterHttpInetAddressStart }
::= { ipFilterHttpInetTable 1 }
IpFilterHttpInetEntry ::= SEQUENCE {
ipFilterHttpInetAddressType InetAddressType,
ipFilterHttpInetAddressStart InetAddress,
ipFilterHttpInetAddressEnd InetAddress,
ipFilterHttpInetStatus ValidStatus
}
ipFilterHttpInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of IP address filter .
Only supports IPv4 and IPv6 address types."
::= { ipFilterHttpInetEntry 1 }
ipFilterHttpInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterHttpInetEntry 2 }
ipFilterHttpInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterHttpInetEntry 3 }
ipFilterHttpInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterHttpInetEntry 4 }
--ipFilterTelnetInetTable
ipFilterTelnetInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterTelnetInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 14 }
ipFilterTelnetInetEntry OBJECT-TYPE
SYNTAX IpFilterTelnetInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow them to connect to this device through SNMP."
INDEX { ipFilterTelnetInetAddressType,
IMPLIED ipFilterTelnetInetAddressStart }
::= { ipFilterTelnetInetTable 1 }
IpFilterTelnetInetEntry ::= SEQUENCE {
ipFilterTelnetInetAddressType InetAddressType,
ipFilterTelnetInetAddressStart InetAddress,
ipFilterTelnetInetAddressEnd InetAddress,
ipFilterTelnetInetStatus ValidStatus
}
ipFilterTelnetInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of IP address filter .
Only supports IPv4 and IPv6 address types."
::= { ipFilterTelnetInetEntry 1 }
ipFilterTelnetInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterTelnetInetEntry 2 }
ipFilterTelnetInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterTelnetInetEntry 3 }
ipFilterTelnetInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterTelnetInetEntry 4 }
ipFilterAllClientCtl OBJECT IDENTIFIER ::= { ipFilterMgt 15 }
ipFilterAllClientCtlInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The type of IP address filter. Only supports IPv4 and IPv6
address types."
::= { ipFilterAllClientCtl 1 }
ipFilterAllClientCtlInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterAllClientCtl 2 }
ipFilterAllClientCtlInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterAllClientCtl 3 }
ipFilterAllClientCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for IP filter control. Set this object to create(2) to
create entries in the ipFilterSnmpInetTable,
ipFilterHttpInetTable and ipFilterTelnetInetTable. Set this
object to destroy(3) to destroy specified entries in the
ipFilterSnmpInetTable, ipFilterHttpInetTable and
ipFilterTelnetInetTable. When the action is finshed, whether
successfully or not, or no action is taken, the value of this
object is always noAction(1)."
::= { ipFilterAllClientCtl 4 }
--
-- dot1xMgt
--
-- The extension table of dot1xAuthConfigTable
dot1xAuthConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xAuthConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table of dot1xAuthConfigTable."
::= { dot1xMgt 1 }
dot1xAuthConfigExtEntry OBJECT-TYPE
SYNTAX Dot1xAuthConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of dot1xAuthConfigExtTable."
AUGMENTS { dot1xAuthConfigEntry }
::= { dot1xAuthConfigExtTable 1 }
Dot1xAuthConfigExtEntry ::= SEQUENCE
{
dot1xAuthConfigExtOperMode INTEGER,
dot1xAuthConfigExtMultiHostMaxCnt Integer32,
dot1xAuthConfigExtPortIntrusionAction INTEGER
}
dot1xAuthConfigExtOperMode OBJECT-TYPE
SYNTAX INTEGER
{
singleHost(1),
multiHost(2),
macBasedAuth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The operation mode of dot1x port which allows host
connection to 802.1x-authorized ports."
::= { dot1xAuthConfigExtEntry 1 }
dot1xAuthConfigExtMultiHostMaxCnt OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables."
DEFVAL { 5 }
::= { dot1xAuthConfigExtEntry 2 }
dot1xAuthConfigExtPortIntrusionAction OBJECT-TYPE
SYNTAX INTEGER
{
block-traffic(1),
guest-vlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Responses to intrusion when the authentication is failed;
block-traffic(1) means that to block traffic when the authentication is failed and
guest-vlan(2) means that to join to a guest VLAN when the authentication is failed."
::= { dot1xAuthConfigExtEntry 3 }
--
-- networkAccessPortTable
--
networkAccessPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAccessPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of network access about every port."
::= { networkAccessMgt 2 }
networkAccessPortEntry OBJECT-TYPE
SYNTAX NetworkAccessPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the networkAccessPort table."
INDEX { networkAccessPortPortIndex }
::= { networkAccessPortTable 1 }
NetworkAccessPortEntry ::= SEQUENCE
{
networkAccessPortPortIndex InterfaceIndex,
networkAccessPortDynamicVlan EnabledStatus,
networkAccessPortMacFilter INTEGER,
networkAccessPortGuestVlan INTEGER,
networkAccessPortDynamicQos EnabledStatus
}
networkAccessPortPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of the
portTable. The interface identified by a particular value of this port
index is the same interface identified by the same value of
ifIndex in the IF-MIB."
::= { networkAccessPortEntry 1 }
networkAccessPortDynamicVlan OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets enabled(1) to enable dynamic VLAN assigment and
sets disabled(2) to disable dynamic VLAN assigment."
::= { networkAccessPortEntry 2 }
networkAccessPortMacFilter OBJECT-TYPE
SYNTAX INTEGER (0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the MAC filter ID, Set this variable to zero to
disable MAC filter."
::= { networkAccessPortEntry 5 }
networkAccessPortGuestVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the guest VLAN ID. To disable the VLAN, set the value to 0."
::= { networkAccessPortEntry 6 }
networkAccessPortDynamicQos OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to enabled(1) to enable Dynamic QoS.
Set this object to disabled(2) to disable Dynamic QoS."
::= { networkAccessPortEntry 10 }
--
-- networkAccessClearMacAddressMgt
--
networkAccessClearMacAddressMgt OBJECT IDENTIFIER ::= { networkAccessMgt 3 }
networkAccessClearMacAddressAttribute OBJECT-TYPE
SYNTAX INTEGER
{
all (1),
static (2),
dynamic (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Attribute for clearing Mac address. Specifies the certain attribute
in Mac address table. all(1) indicates both reauthorized and learnt
secure MAC address; static(2) indicates reauthorized MAC address;
dynamic(3) indicates learnt secure MAC address."
::= { networkAccessClearMacAddressMgt 1 }
networkAccessClearMacAddressMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies MAC address in the MAC address table for clearing
MAC address. '000000' represents that no MAC address is specified."
::= { networkAccessClearMacAddressMgt 2 }
networkAccessClearMacAddressPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specifies port in the MAC address table for clearing MAC address.
'0' represents that no port is specified."
::= { networkAccessClearMacAddressMgt 3 }
networkAccessClearMacAddressAction OBJECT-TYPE
SYNTAX INTEGER
{
noclear (1),
clear (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing MAC address . When setting this object to clear(2)
to begin the clearing MAC address operation, a particular MAC address
is cleared from the MAC address table. When the action is finshed whether
or not it is successful or no action is taken, the value of this object
is always noclear(1)."
::= { networkAccessClearMacAddressMgt 4 }
--
-- networkAccessMacAddressTable
--
networkAccessMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAccessMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the information of network access MAC addresses."
::= { networkAccessMgt 4}
networkAccessMacAddressEntry OBJECT-TYPE
SYNTAX NetworkAccessMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the networkAccessMacAddress table."
INDEX { networkAccessMacAddressAddress, networkAccessMacAddressPort }
::= { networkAccessMacAddressTable 1 }
NetworkAccessMacAddressEntry ::= SEQUENCE
{
networkAccessMacAddressAddress MacAddress,
networkAccessMacAddressPort InterfaceIndex,
networkAccessMacAddressInetAddressType InetAddressType,
networkAccessMacAddressRadiusServerInetAddress InetAddress,
networkAccessMacAddressTime DisplayString,
networkAccessMacAddressAttribute INTEGER
}
networkAccessMacAddressAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the authenticated MAC address."
::= { networkAccessMacAddressEntry 1 }
networkAccessMacAddressPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the port of authenticated MAC address."
::= { networkAccessMacAddressEntry 2 }
networkAccessMacAddressInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
networkAccessMacAddressRadiusServerInetAddress type."
::= { networkAccessMacAddressEntry 3 }
networkAccessMacAddressRadiusServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the IP address of radius server that authenticates
the specified Mac address."
::= { networkAccessMacAddressEntry 4 }
networkAccessMacAddressTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the authentication time of the authenticated MAC address.
The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'.
'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is
preceded by a zero. 'DD' is the day of a month. A single-digit day
is preceded by the value zero. 'HH', 'MM' and 'SS' are hour,
minute, and second respectively. A single-digit hour, minute,
and second are preceded by a zero value. An example is:
'2001y 01m 01d 00h 04m 43s'."
::= { networkAccessMacAddressEntry 5 }
networkAccessMacAddressAttribute OBJECT-TYPE
SYNTAX INTEGER
{
static (1),
dynamic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the attribute of an authenticated MAC address.
static(1) indicates resauthorized secure MAC address.
dynamic(2) indicates learnt secure MAC address."
::= { networkAccessMacAddressEntry 6 }
networkAccessAging OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to enabled(1) to enable MAC address aging feature.
Set this object to disabled(2) to disable MAC address aging feature."
::= { networkAccessMgt 5 }
--
-- networkAccessMacFilterWithMaskTable
--
networkAccessMacFilterWithMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAccessMacFilterWithMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings for MAC filter."
::= { networkAccessMgt 6}
networkAccessMacFilterWithMaskEntry OBJECT-TYPE
SYNTAX NetworkAccessMacFilterWithMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the networkAccessMacFilterWithMaskTable."
INDEX { networkAccessMacFilterWithMaskID,
networkAccessMacFilterWithMaskMacAddress,
networkAccessMacFilterWithMaskMacAddressMask }
::= { networkAccessMacFilterWithMaskTable 1 }
NetworkAccessMacFilterWithMaskEntry ::= SEQUENCE
{
networkAccessMacFilterWithMaskID INTEGER,
networkAccessMacFilterWithMaskMacAddress MacAddress,
networkAccessMacFilterWithMaskMacAddressMask MacAddress,
networkAccessMacFilterWithMaskStatus INTEGER
}
networkAccessMacFilterWithMaskID OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the MAC filter ID."
::= { networkAccessMacFilterWithMaskEntry 1 }
networkAccessMacFilterWithMaskMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the MAC address to be filtered."
::= { networkAccessMacFilterWithMaskEntry 2 }
networkAccessMacFilterWithMaskMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the MAC mask to be filtered."
::= { networkAccessMacFilterWithMaskEntry 3 }
networkAccessMacFilterWithMaskStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this object to valid(1) to create an entry.
Set this object to invalid(2) to destroy an entry."
::= { networkAccessMacFilterWithMaskEntry 4 }
--
-- dosMgt
--
system OBJECT IDENTIFIER ::= { dosMgt 1 }
dosSmurf OBJECT IDENTIFIER ::= { system 3 }
dosSmurfStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of Smurf protection. Set this to enabled(1)
to enable the feature, and set this to disabled(2) to
disable the feature."
::= { dosSmurf 1 }
dosTcpNullScan OBJECT IDENTIFIER ::= { system 5 }
dosTcpNullScanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of TCP Null-scan protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature."
::= { dosTcpNullScan 1 }
dosTcpSynFinScan OBJECT IDENTIFIER ::= { system 6 }
dosTcpSynFinScanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of TCP SYN FIN scan protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature."
::= { dosTcpSynFinScan 1 }
dosTcpXmasScan OBJECT IDENTIFIER ::= { system 7 }
dosTcpXmasScanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of TCP Xmas-scan protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature."
::= { dosTcpXmasScan 1 }
dosTcpUdpPortZero OBJECT IDENTIFIER ::= { system 11 }
dosTcpUdpPortZeroStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of checking for TCP/UDP packets with port 0.
Set this to enabled(1) to enable the feature, and
set this to disabled(2) to disable the feature."
::= { dosTcpUdpPortZero 1 }
--
-- sysLogMgt
--
-- Management for system log. This configures the logging
-- of events inside the switch.
sysLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the system log is enabled."
::= { sysLogMgt 1 }
sysLogHistoryFlashLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to flash."
::= { sysLogMgt 2 }
sysLogHistoryRamLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to RAM."
::= { sysLogMgt 3 }
--
--remoteLogMgt
--
remoteLogMgt OBJECT IDENTIFIER ::= { sysLogMgt 6 }
remoteLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the remote log system is enabled."
::= { remoteLogMgt 1 }
remoteLogLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for remote log."
::= { remoteLogMgt 2 }
remoteLogFacilityType OBJECT-TYPE
SYNTAX INTEGER
{
localUse0(16),
localUse1(17),
localUse2(18),
localUse3(19),
localUse4(20),
localUse5(21),
localUse6(22),
localUse7(23)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The facility type for remote log."
::= { remoteLogMgt 3 }
--remoteLogServerInetTable
remoteLogServerInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteLogServerInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for storing the remote log server list."
::= { remoteLogMgt 7 }
remoteLogServerInetEntry OBJECT-TYPE
SYNTAX RemoteLogServerInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for remoteLogServerInetTable."
INDEX { remoteLogServerInetAddressType,
remoteLogServerInetAddress}
::= { remoteLogServerInetTable 1 }
RemoteLogServerInetEntry ::= SEQUENCE
{
remoteLogServerInetAddressType InetAddressType,
remoteLogServerInetAddress InetAddress,
remoteLogServerStatus ValidStatus,
remoteLogServerUdpPort Integer32
}
remoteLogServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the type of address
denoted in remoteLogServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported."
::= { remoteLogServerInetEntry 1 }
remoteLogServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of the remote log Server."
::= { remoteLogServerInetEntry 2 }
remoteLogServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { remoteLogServerInetEntry 3 }
remoteLogServerUdpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The UDP port number of the remote log Server"
::= { remoteLogServerInetEntry 4 }
--
--smtpMgt
--
smtpMgt OBJECT IDENTIFIER ::= { sysLogMgt 7 }
smtpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SMTP, set disabled(2) to disable
the SMTP."
::= { smtpMgt 1 }
smtpSeverityLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the SMTP minimum severity level to send the event message."
::= { smtpMgt 2 }
smtpSourceEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMTP source email address,
the sender's mail address that appears
in the 'From' field of the mail."
::= { smtpMgt 3 }
--smtpServerIpTable
smtpServerIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The SMTP server IP table.
The maximum servers to be added is 3."
::= { smtpMgt 4 }
smtpServerIpEntry OBJECT-TYPE
SYNTAX SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpServerIpTable."
INDEX { smtpServerIp }
::= { smtpServerIpTable 1 }
SmtpServerIpEntry ::= SEQUENCE
{
smtpServerIp IpAddress,
smtpServerIpStatus ValidStatus
}
smtpServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "SMTP mail server's IP address."
::= { smtpServerIpEntry 1 }
smtpServerIpStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpServerIpEntry 2 }
--smtpDestEMailTable
smtpDestEMailTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5."
::= { smtpMgt 5}
smtpDestEMailEntry OBJECT-TYPE
SYNTAX SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpDestEMailTable."
INDEX { smtpDestEMail }
::= { smtpDestEMailTable 1 }
SmtpDestEMailEntry ::= SEQUENCE
{
smtpDestEMail DisplayString,
smtpDestEMailStatus ValidStatus
}
smtpDestEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SMTP destination e-mail address."
::= { smtpDestEMailEntry 1 }
smtpDestEMailStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpDestEMailEntry 2 }
sysLogCommandLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable command log, set disabled(2) to disable
command log."
::= { sysLogMgt 10 }
--
-- lineMgt
--
-- Management for line. This includes management for
-- serial line (RS232 port) and Telnet.
consoleMgt OBJECT IDENTIFIER ::= { lineMgt 1 }
telnetMgt OBJECT IDENTIFIER ::= { lineMgt 2 }
vtyMgt OBJECT IDENTIFIER ::= { lineMgt 3 }
--consoleMgt
consoleDataBits OBJECT-TYPE
SYNTAX INTEGER
{
databits7(1),
databits8(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of data bits."
::= { consoleMgt 1 }
consoleParity OBJECT-TYPE
SYNTAX INTEGER
{
partyNone(1),
partyEven(2),
partyOdd(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the generation of a parity bit."
::= { consoleMgt 2 }
consoleBaudRate OBJECT-TYPE
SYNTAX INTEGER
{
baudRate9600(1),
baudRate19200(2),
baudRate38400(3),
baudRate57600(4),
baudRate115200(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Baud rate: Valid values are 115200, 57600, 38400,
19200, and 9600."
::= { consoleMgt 3 }
consoleStopBits OBJECT-TYPE
SYNTAX INTEGER
{
stopbits1(1),
stopbits2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The console stop bits, valid values are stopbits1(1) or stopbits2(2)"
::= { consoleMgt 4 }
consoleExecTimeout OBJECT-TYPE
SYNTAX Integer32 (0 | 60..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In a serial console, use the consoleExecTimeout
variable to set the interval that the EXEC command
interpreter waits until user input is detected;
set the value to 0 to disable it."
::= { consoleMgt 5 }
consolePasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed console logon attempts that may be
made before the system will not accept a further attempt
in the time specified by consoleSilentTime. A value of 0
disables the functionality."
::= { consoleMgt 6 }
consoleSilentTime OBJECT-TYPE
SYNTAX Integer32 (0 | 1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The length of time that the management console is
inaccessible after the number of failed logon
attempts has reached consolePasswordThreshold. A value
of 0 disables the functionality."
::= { consoleMgt 7 }
--to set login timeout seconds
consoleLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(10..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Console login response timeout setting."
::= { consoleMgt 10 }
-- telnetMgt
telnetStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable or disable the telnet function. Any new telnet
request will be rejected and all current telnet sessions
will be terminated if this status is set to disabled(2)."
DEFVAL { enabled }
::= { telnetMgt 4 }
telnetPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The telnet session port number."
DEFVAL { 23 }
::= { telnetMgt 5 }
-- vtyMgt
vtyExecTimeout OBJECT-TYPE
SYNTAX Integer32 (60..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the interval that the system waits for user input
before terminating the current session."
::= { vtyMgt 1 }
vtyPasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed logon attempts that may be made before the
system will not accept a further attempt to log on.
Setting to 0 means disabled."
::= { vtyMgt 2 }
vtyLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(10..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login response timeout setting."
::= { vtyMgt 3 }
vtyMaxSession OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of allowed sessions."
DEFVAL { 8 }
::= { vtyMgt 4 }
vtySilentTime OBJECT-TYPE
SYNTAX Integer32 (0 | 1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time the system waits before etablishing a new session
after the number of failed logins reaches the specified limit.
Setting to 0 means disabled."
::= { vtyMgt 5 }
--
-- sysTimeMgt
--
sntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 1 }
ntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 5 }
sntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP."
::= { sntpMgt 1 }
sntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service mode."
::= { sntpMgt 2 }
sntpPollInterval OBJECT-TYPE
SYNTAX Integer32(16..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Polling interval."
::= { sntpMgt 3 }
sntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for SNTP servers. IP addresses
must occupy contiguous indexes, starting from 1.
If a removed entry is not the last entry, the table
will be shifted to contiguous indexes automatically."
::= { sntpMgt 4 }
sntpServerEntry OBJECT-TYPE
SYNTAX SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for SNTP servers."
INDEX { sntpServerIndex }
::= { sntpServerTable 1 }
SntpServerEntry ::= SEQUENCE
{
sntpServerIndex Integer32,
sntpServerInetAddressType InetAddressType,
sntpServerInetAddress InetAddress,
sntpServerStatus ValidStatus
}
sntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a server."
::= { sntpServerEntry 1 }
sntpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of address
denoted in sntpServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported."
::= { sntpServerEntry 4 }
sntpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of a time server."
::= { sntpServerEntry 5 }
sntpServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { sntpServerEntry 6 }
sysCurrentTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by a space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is a
four-digit year. An example is: 'Jan 1 02:03:04 2002'."
::= { sysTimeMgt 2 }
sysTimeZone OBJECT-TYPE
SYNTAX DisplayString(SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero. When
sysTimeZonePredefined object is set to any value other than
none(1), this object will be empty string."
::= { sysTimeMgt 3 }
sysTimeZoneName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time zone. When sysTimeZonePredefined object
is set to any value other than none(1), this object will be
empty string."
::= { sysTimeMgt 4 }
ntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP, set disabled(2) to disable
the NTP."
::= { ntpMgt 1 }
ntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service mode."
::= { ntpMgt 2 }
ntpPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Polling interval in seconds."
::= { ntpMgt 3 }
ntpAuthenticateStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP Authenticate, set disabled(2) to
disable the NTP."
::= { ntpMgt 4 }
ntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP servers"
::= { ntpMgt 5 }
ntpServerEntry OBJECT-TYPE
SYNTAX NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP servers."
INDEX { ntpServerIpAddress }
::= { ntpServerTable 1 }
NtpServerEntry ::= SEQUENCE
{
ntpServerIpAddress IpAddress,
ntpServerVersion Integer32,
ntpServerKeyId Integer32,
ntpServerStatus INTEGER
}
ntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0."
::= { ntpServerEntry 1 }
ntpServerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP version."
::= { ntpServerEntry 2 }
ntpServerKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for a NTP server. This variable can only be written."
::= { ntpServerEntry 3 }
ntpServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ntpServerEntry 4 }
ntpAuthKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP Authentication keys"
::= { ntpMgt 6 }
ntpAuthKeyEntry OBJECT-TYPE
SYNTAX NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP Authentication keys."
INDEX { ntpAuthKeyId }
::= { ntpAuthKeyTable 1 }
NtpAuthKeyEntry::= SEQUENCE
{
ntpAuthKeyId Integer32,
ntpAuthKeyWord OCTET STRING,
ntpAuthKeyStatus INTEGER
}
ntpAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a Authentication key. This table has fixed size."
::= { ntpAuthKeyEntry 1 }
ntpAuthKeyWord OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Authentication key word is used to created a key by the MD5
And the max length is 32."
::= { ntpAuthKeyEntry 2 }
ntpAuthKeyStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ntpAuthKeyEntry 3 }
--
-- fileMgt
--
-- Management for File System Manipulate, including files copy, display and delete.
fileCopyMgt OBJECT IDENTIFIER ::= { fileMgt 1 }
fileInfoMgt OBJECT IDENTIFIER ::= { fileMgt 2 }
--
-- This performs the copy operation.
--
fileCopySrcOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5),
http(6),
ftp(7),
sftp(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "fileCopySrcOperType specifies where to copy from,
and fileCopyDestOperType specifies where to copy to.
Possible combinations of 'fileCopySrcOperType to
fileCopyDestOperType' and required parameters are listed in
the following table.
--------------+------------------+---------------------------------
Source | Destination | Required parameters
--------------+------------------+---------------------------------
file(1) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
+------------------+---------------------------------
| tftp(4) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| unit(5) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
+------------------+---------------------------------
| ftp(7) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| sftp(10) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
runningCfg(2) | file(1) | fileCopyDestFileName
+------------------+---------------------------------
| startUpCfg(3) | fileCopyDestFileName
+------------------+---------------------------------
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| sftp(10) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
startUpCfg(3) | file(1) | fileCopyDestFileName
+------------------+---------------------------------
| runningCfg(2) | None.
+------------------+---------------------------------
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| sftp(10) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
tftp(4) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| addRunningCfg(15)| fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
--------------+------------------+---------------------------------
unit(5) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
--------------+------------------+---------------------------------
ftp(7) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| addRunningCfg(15)| fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
sftp(10) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| addRunningCfg(15)| fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------"
::= { fileCopyMgt 1}
fileCopySrcFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source file name for fileCopyMgt when a copy
operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3),
this variable can be ignored."
::= { fileCopyMgt 2 }
fileCopyDestOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5),
http(6),
ftp(7),
sftp(10),
addRunningCfg(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "See the description for fileCopySrcOperType."
::= { fileCopyMgt 3 }
fileCopyDestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file name for fileCopyMgt when a
copy operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopyDestOperType is runningCfg(2) or startupCfg(3),
this variable can be ignored."
::= { fileCopyMgt 4 }
fileCopyFileType OBJECT-TYPE
SYNTAX INTEGER {
opcode(1),
config(2),
bootRom(3),
loader(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to copy in fileCopyMgt. opcode(1) indicates operation
code, config(2) indicates configuration file, bootRom(3) indicates
diagnostic image file and loader(5) indicates loader image file. If
the fileCopySrcOperType or fileCopyDestOperType is either runningCfg(2)
or startupCfg(3), this variable can be ignored. bootRom(3) and
loader(5) can be set only when the fileCopySrcOperType is tftp(4) and
fileCopyDestOperType is file(1)."
::= { fileCopyMgt 5 }
fileCopyUnitId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the switch unit for stackable devices.
When performing the 'copy unit file' or 'copy file unit' action,
if neither fileCopySrcOperType nor fileCopyDestOperType
is unit(5), this variable can be ignored."
::= { fileCopyMgt 7 }
fileCopyAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copy(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to copy(2) to begin the copy operation. When
the device is not copying, this object will have a value of
notCopying(1)."
::= { fileCopyMgt 8 }
fileCopyStatus OBJECT-TYPE
SYNTAX INTEGER {
fileCopyTftpUndefError(1),
fileCopyTftpFileNotFound(2),
fileCopyTftpAccessViolation(3),
fileCopyTftpDiskFull(4),
fileCopyTftpIllegalOperation(5),
fileCopyTftpUnkownTransferId(6),
fileCopyTftpFileExisted(7),
fileCopyTftpNoSuchUser(8),
fileCopyTftpTimeout(9),
fileCopyTftpSendError(10),
fileCopyTftpReceiverError(11),
fileCopyTftpSocketOpenError(12),
fileCopyTftpSocketBindError(13),
fileCopyTftpUserCancel(14),
fileCopyTftpCompleted(15),
fileCopyParaError(16),
fileCopyBusy(17),
fileCopyUnknown(18),
fileCopyReadFileError(19),
fileCopySetStartupError(20),
fileCopyFileSizeExceed(21),
fileCopyMagicWordError(22),
fileCopyImageTypeError(23),
fileCopyHeaderChecksumError(24),
fileCopyImageChecksumError(25),
fileCopyWriteFlashFinish(26),
fileCopyWriteFlashError(27),
fileCopyWriteFlashProgramming(28),
fileCopyError(29),
fileCopySuccess(30),
fileCopyCompleted(31),
--
-- ES4612-20-00499, 2008-12-09, support FTPS
--
fileCopyFileNotFound(41),
fileCopyServerPermissionDenied(42),
fileCopyStorageFull(43),
fileCopyConnectError(44),
fileCopyServerNotInService(45),
fileCopyDataConnectionOpenError(46),
fileCopyLogInError(47),
fileCopyInvalidFileName(48),
fileCopyServerNotAcceptProvidedCiphers(49),
fileCopyServerNotSupportFtps(50),
fileCopyFileUnavailable(51),
fileCopyUnclassifiedError(52),
fileCopyTimeout(53),
fileCopyProjectIdError(54),
fileCopyFileNumExceed(55),
fileCopySameVersion(56)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last copy procedure, if any. This
object will have a value of fileCopyUnknown(18) if no
copy operation has been performed. The listed values are
identical to fileAutoDownloadResultStatus."
::= { fileCopyMgt 9 }
fileCopyServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Internet address type of the remote server. Only ipv4(1)
type is supported."
::= { fileCopyMgt 20 }
fileCopyServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Internet address of the remote server."
::= { fileCopyMgt 21 }
fileCopyServerUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login user name for the remote server. When this variable is
empty, the system will use 'anonymous' as user name to log in
to the remote server."
::= { fileCopyMgt 22 }
fileCopyServerPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login password for the remote server. This variable can only
be written. When this variable is read, it always returns a
zero-length string."
::= { fileCopyMgt 23 }
--
-- This mangement performs the display and delete operation.
--
fileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contain the information of the file system;
we can also perform the delete, set startup file operation."
::= { fileInfoMgt 1 }
fileInfoEntry OBJECT-TYPE
SYNTAX FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptually row for fileInfoTable."
INDEX { fileInfoUnitID, IMPLIED fileInfoFileName}
::= { fileInfoTable 1 }
FileInfoEntry ::= SEQUENCE
{
fileInfoUnitID Integer32,
fileInfoFileName DisplayString,
fileInfoFileType INTEGER,
fileInfoIsStartUp TruthValue,
fileInfoFileSize Integer32,
fileInfoCreationTime DisplayString,
fileInfoDelete INTEGER
}
fileInfoUnitID OBJECT-TYPE
SYNTAX Integer32(1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileInfoEntry 1 }
fileInfoFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The file Name of the file System in the device."
::= { fileInfoEntry 2 }
fileInfoFileType OBJECT-TYPE
SYNTAX INTEGER
{
diag(1),
runtime(2),
syslog(3),
cmdlog(4),
config(5),
postlog(6),
private(7),
certificate(8),
webarchive(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file type of the file System in the device."
::= { fileInfoEntry 3 }
fileInfoIsStartUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation."
::= { fileInfoEntry 4 }
fileInfoFileSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sizes( in bytes) of the file."
::= { fileInfoEntry 5 }
fileInfoCreationTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-digit day is preceded by
a space. 'hh:mm:ss' is a 24-hour representations of hours,
minutes, and seconds. A single-digit hour is preceded by a
zero. 'yyyy' is the four-digit year. An example is:
'Jan 1 02:03:04 2002'."
::= { fileInfoEntry 6 }
fileInfoDelete OBJECT-TYPE
SYNTAX INTEGER
{
noDelete(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write this object to delete(2) to delete a file, when
read, this always return noDelete(1)."
::= { fileInfoEntry 7 }
--fileAutoDownloadResultTable
fileAutoDownloadResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains file auto download result information."
::= { fileMgt 3 }
fileAutoDownloadResultEntry OBJECT-TYPE
SYNTAX FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for fileAutoDownloadResultTable."
INDEX {fileAutoDownloadResultUnitID}
::= { fileAutoDownloadResultTable 1 }
FileAutoDownloadResultEntry ::= SEQUENCE
{
fileAutoDownloadResultUnitID Integer32,
fileAutoDownloadResultAction INTEGER,
fileAutoDownloadResultStatus INTEGER
}
fileAutoDownloadResultUnitID OBJECT-TYPE
SYNTAX Integer32(1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileAutoDownloadResultEntry 1 }
fileAutoDownloadResultAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copying(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
You can check the download result through the fileAutoDownloadResultStatus object
after the download action has finished.
Please note that this object is read-only, since the auto download action is triggered
automatically by the system when an image file or a config file is set as startup setting
through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects,
but not set by the user manually through this fileAutoDownloadResultAction object."
::= { fileAutoDownloadResultEntry 2 }
fileAutoDownloadResultStatus OBJECT-TYPE
SYNTAX INTEGER {
fileCopyTftpUndefError(1),
fileCopyTftpFileNotFound(2),
fileCopyTftpAccessViolation(3),
fileCopyTftpDiskFull(4),
fileCopyTftpIllegalOperation(5),
fileCopyTftpUnkownTransferId(6),
fileCopyTftpFileExisted(7),
fileCopyTftpNoSuchUser(8),
fileCopyTftpTimeout(9),
fileCopyTftpSendError(10),
fileCopyTftpReceiverError(11),
fileCopyTftpSocketOpenError(12),
fileCopyTftpSocketBindError(13),
fileCopyTftpUserCancel(14),
fileCopyTftpCompleted(15),
fileCopyParaError(16),
fileCopyBusy(17),
fileCopyUnknown(18),
fileCopyReadFileError(19),
fileCopySetStartupError(20),
fileCopyFileSizeExceed(21),
fileCopyMagicWordError(22),
fileCopyImageTypeError(23),
fileCopyHeaderChecksumError(24),
fileCopyImageChecksumError(25),
fileCopyWriteFlashFinish(26),
fileCopyWriteFlashError(27),
fileCopyWriteFlashProgramming(28),
fileCopyError(29),
fileCopySuccess(30),
fileCopyCompleted(31),
--
-- ES4612-20-00499, 2008-12-09, support FTPS
--
fileCopyFileNotFound(41),
fileCopyServerPermissionDenied(42),
fileCopyStorageFull(43),
fileCopyConnectError(44),
fileCopyServerNotInService(45),
fileCopyDataConnectionOpenError(46),
fileCopyLogInError(47),
fileCopyInvalidFileName(48),
fileCopyServerNotAcceptProvidedCiphers(49),
fileCopyServerNotSupportFtps(50),
fileCopyFileUnavailable(51),
fileCopyUnclassifiedError(52),
fileCopyTimeout(53),
fileCopyProjectIdError(54),
fileCopyFileNumExceed(55),
fileCopySameVersion(56)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.
The listed values are identical to fileCopyStatus."
::= { fileAutoDownloadResultEntry 3 }
--
-- poeMgt
--
--
-- PSE/PD for IEEE draft 802.3at v3.2, Feb. 2009
--
-- PSE global objects
pethPseMainExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPseMainExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control attributes of the main
power source in a PSE device. Ethernet switches are one example of
boxes that would support these objects. Values of all read-write
objects in this table are persistent at restart/reboot."
REFERENCE "IEEE 802.3af, POWER-ETHERNET-MIB.pethMainPseTable"
::= { poeMgt 5 }
pethPseMainExtEntry OBJECT-TYPE
SYNTAX PethPseMainExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the Main power of a PSE."
AUGMENTS { pethMainPseEntry }
::= { pethPseMainExtTable 1 }
PethPseMainExtEntry ::= SEQUENCE
{
pethPseMainExtDllPowerType INTEGER,
pethPseMainExtDllPowerSource INTEGER
}
pethPseMainExtDllPowerType OBJECT-TYPE
SYNTAX INTEGER
{
type2Pse(0),
type1Pse(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the local system is a PSE or a PD
and whether it is Type 1 or Type 2."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.12
aDLLPowerType"
::= { pethPseMainExtEntry 1 }
pethPseMainExtDllPowerSource OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
primary(1),
backup(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power sources of the local system."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.14
aDLLPowerSource"
::= { pethPseMainExtEntry 2 }
--
-- PSE Port Table
--
pethPsePortExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPsePortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the power characteristics
of power Ethernet ports on a Power Source Entity (PSE) device.
This group will be implemented in managed power Ethernet switches and
mid-span devices. Values of all read-write objects in this table are
persistent at restart/reboot."
REFERENCE "IEEE 802.3af, POWER-ETHERNET-MIB.pethPsePortTable"
::= { poeMgt 6 }
pethPsePortExtEntry OBJECT-TYPE
SYNTAX PethPsePortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power characteristics of
a power Ethernet PSE port."
AUGMENTS { pethPsePortEntry }
::= { pethPsePortExtTable 1 }
PethPsePortExtEntry ::= SEQUENCE
{
pethPsePortExtMirroredDllPdRequestedPowerValue INTEGER,
pethPsePortExtDllPseAllocatedPowerValue INTEGER,
pethPsePortTimeRange DisplayString,
pethPsePortTimeRangeStatus INTEGER,
pethPsePortExtMaximumPowerValue INTEGER,
pethPsePortExtUsedPowerValue INTEGER
}
pethPsePortExtMirroredDllPdRequestedPowerValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the PD requested power value received from the remote system.
The definition and encoding of PD requested power value is the same as
described in pethPdPortDllPdRequestedPowerValue."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.18
aMirroredDLLPDRequestedPowerValue"
::= { pethPsePortExtEntry 4 }
pethPsePortExtDllPseAllocatedPowerValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the PSE allocated power value that the local system has
currently allocated to the remote system. The PSE allocated power value
is the maximum input average power that the PSE wants the PD to ever
draw under this allocation if it is accepted. The PSE allocated power
value is encoded according to Equation (33-20), where X is the decimal
value of pethPsePortExtDllPseAllocatedPowerValue."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.20
aDLLPSEAllocatedPowerValue"
::= { pethPsePortExtEntry 6 }
pethPsePortTimeRange OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time range entry bound to the port.
This object should be equal to one of the timeRangeName
objects in timeRangeTable. The object works when
pethPsePortAdminEnable is enabled(1)."
::= { pethPsePortExtEntry 11 }
pethPsePortTimeRangeStatus OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If no time range entry is bound to the port, value of this
object is none(0). If PoE time range of the port is active,
value of this object is active(1). If PoE time range of
the port is inactive, value of this object is inactive(2)."
::= { pethPsePortExtEntry 12 }
pethPsePortExtMaximumPowerValue OBJECT-TYPE
SYNTAX INTEGER (3000..34200)
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Returns the user-configurable maximum power value that
the local system has currently allocated to the remote system.
The units of this variable is milliwatts."
::= { pethPsePortExtEntry 13 }
pethPsePortExtUsedPowerValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the currently used power value that
the local system is delivering to the remote system.
The units of this variable is milliwatts."
::= { pethPsePortExtEntry 14 }
--
-- mcastStormMgt
--
mcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 1 }
mcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of multicast storms for ports."
::= { mcastStormMgt 1 }
mcastStormEntry OBJECT-TYPE
SYNTAX McastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of multiStormTable."
INDEX { mcastStormIfIndex }
::= { mcastStormTable 1 }
McastStormEntry ::= SEQUENCE
{
mcastStormIfIndex InterfaceIndex,
mcastStormStatus EnabledStatus,
mcastStormPktRate Integer32,
mcastStormPktRateResolution Integer32
}
mcastStormIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { mcastStormEntry 1 }
mcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether multicast storm protection is enabled."
::= { mcastStormEntry 2 }
mcastStormPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Multicast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100."
::= { mcastStormEntry 4 }
mcastStormPktRateResolution OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Present the rate's resolution. Its unit is packets per
second"
::= { mcastStormEntry 8 }
--
-- bcastStormMgt
--
-- Management for broadcast storm control for ports.
bcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 3 }
bcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of broadcast storms for ports."
::= { bcastStormMgt 1 }
bcastStormEntry OBJECT-TYPE
SYNTAX BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of bcastStormTable."
INDEX { bcastStormIfIndex }
::= { bcastStormTable 1 }
BcastStormEntry ::= SEQUENCE
{
bcastStormIfIndex InterfaceIndex,
bcastStormStatus EnabledStatus,
bcastStormPktRate Integer32,
bcastStormPktRateResolution Integer32
}
bcastStormIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { bcastStormEntry 1 }
bcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether broadcast storm protection is enabled."
::= { bcastStormEntry 2 }
bcastStormPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100."
::= { bcastStormEntry 4 }
bcastStormPktRateResolution OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Present the rate's resolution. Its unit is packets per
second"
::= { bcastStormEntry 8 }
--
-- unknownUcastStormMgt
--
unknownUcastStormMgt OBJECT IDENTIFIER ::= {stormMgt 4 }
unknownUcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF UnknownUcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the unknown unicast storm control."
::= { unknownUcastStormMgt 1 }
unknownUcastStormEntry OBJECT-TYPE
SYNTAX UnknownUcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of unknownUcastStormTable."
INDEX { unknownUcastStormIfIndex }
::= { unknownUcastStormTable 1 }
UnknownUcastStormEntry ::= SEQUENCE
{
unknownUcastStormIfIndex InterfaceIndex,
unknownUcastStormStatus EnabledStatus,
unknownUcastStormPktRate Integer32,
unknownUcastStormPktRateResolution Integer32
}
unknownUcastStormIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { unknownUcastStormEntry 1 }
unknownUcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that the unknown unicast
storm protection is enabled/disabled."
::= { unknownUcastStormEntry 2 }
unknownUcastStormPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the packet rate(packet per second) of the storm protection.
The range is 500 to 1488100."
::= { unknownUcastStormEntry 4 }
unknownUcastStormPktRateResolution OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Present the rate's resolution. Its unit is packets per
second"
::= { unknownUcastStormEntry 8 }
--
-- Auto Traffic Control
--
atcMgt OBJECT IDENTIFIER ::= { stormMgt 5 }
atcBcastStormTcApplyTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm."
::= { atcMgt 1 }
atcBcastStormTcReleaseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm."
::= { atcMgt 2 }
atcBcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtcBcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the Auto Traffic Control configuration
and the status for broadcast traffic."
::= { atcMgt 3 }
atcBcastStormEntry OBJECT-TYPE
SYNTAX AtcBcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of the table."
INDEX { atcBcastStormIfIndex }
::= { atcBcastStormTable 1 }
AtcBcastStormEntry ::= SEQUENCE
{
atcBcastStormIfIndex InterfaceIndex,
atcBcastStormEnable EnabledStatus,
atcBcastStormAutoRelease EnabledStatus,
atcBcastStormSampleType INTEGER,
atcBcastStormCurrentTrafficRate Integer32,
atcBcastStormAlarmFireThreshold Integer32,
atcBcastStormAlarmClearThreshold Integer32,
atcBcastStormTcAction INTEGER,
atcBcastStormAlarmFireTrapStatus EnabledStatus,
atcBcastStormAlarmClearTrapStatus EnabledStatus,
atcBcastStormTcApplyTrapStatus EnabledStatus,
atcBcastStormTcReleaseTrapStatus EnabledStatus
}
atcBcastStormIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The specified port on which the ATC is applied."
::= { atcBcastStormEntry 1 }
atcBcastStormEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the ATC of the broadcast
traffic is applied."
::= { atcBcastStormEntry 2 }
atcBcastStormAutoRelease OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the Auto-Release feature
of ATC is applied."
::= { atcBcastStormEntry 3 }
atcBcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER
{
packet-rate(1),
octet-rate(2),
percent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
::= { atcBcastStormEntry 4 }
atcBcastStormCurrentTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates the current broadcast traffic rate."
::= { atcBcastStormEntry 5 }
atcBcastStormAlarmFireThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current broadcast traffic rate
exceeds the specified threshold, it will be treated as the storm."
::= { atcBcastStormEntry 6 }
atcBcastStormAlarmClearThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current broadcast traffic
falls below the specified threshold it will be treated as the
normal traffic."
::= { atcBcastStormEntry 7 }
atcBcastStormTcAction OBJECT-TYPE
SYNTAX INTEGER
{
rate-control(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the protecting action which
ATC will applied to the specified port."
::= { atcBcastStormEntry 8 }
atcBcastStormAlarmFireTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected."
::= { atcBcastStormEntry 9 }
atcBcastStormAlarmClearTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected as
the normal traffic."
::= { atcBcastStormEntry 10 }
atcBcastStormTcApplyTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is activated."
::= { atcBcastStormEntry 11 }
atcBcastStormTcReleaseTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is released."
::= { atcBcastStormEntry 12 }
atcMcastStormTcApplyTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm."
::= { atcMgt 4 }
atcMcastStormTcReleaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm."
::= { atcMgt 5 }
atcMcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtcMcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the Auto Traffic Control configuration
and the status for mulicast traffic."
::= { atcMgt 6 }
atcMcastStormEntry OBJECT-TYPE
SYNTAX AtcMcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of the table."
INDEX { atcMcastStormIfIndex }
::= { atcMcastStormTable 1 }
AtcMcastStormEntry ::= SEQUENCE
{
atcMcastStormIfIndex InterfaceIndex,
atcMcastStormEnable EnabledStatus,
atcMcastStormAutoRelease EnabledStatus,
atcMcastStormSampleType INTEGER,
atcMcastStormCurrentTrafficRate Integer32,
atcMcastStormAlarmFireThreshold Integer32,
atcMcastStormAlarmClearThreshold Integer32,
atcMcastStormTcAction INTEGER,
atcMcastStormAlarmFireTrapStatus EnabledStatus,
atcMcastStormAlarmClearTrapStatus EnabledStatus,
atcMcastStormTcApplyTrapStatus EnabledStatus,
atcMcastStormTcReleaseTrapStatus EnabledStatus
}
atcMcastStormIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The specified port on which the ATC is applied."
::= { atcMcastStormEntry 1 }
atcMcastStormEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the ATC of the mulicast
traffic is applied."
::= { atcMcastStormEntry 2 }
atcMcastStormAutoRelease OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the Auto-Release feature
of ATC is applied."
::= { atcMcastStormEntry 3 }
atcMcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER
{
packet-rate(1),
octet-rate(2),
percent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
::= { atcMcastStormEntry 4 }
atcMcastStormCurrentTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates the current mulicast traffic rate."
::= { atcMcastStormEntry 5 }
atcMcastStormAlarmFireThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current mulicast traffic rate
exceeds the specified threshold, it will be treated as the storm."
::= { atcMcastStormEntry 6 }
atcMcastStormAlarmClearThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current mulicast traffic
falls below the specified threshold it will be treated as the
normal traffic."
::= { atcMcastStormEntry 7 }
atcMcastStormTcAction OBJECT-TYPE
SYNTAX INTEGER
{
rate-control(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the protecting action which
ATC will applied to the specified port."
::= { atcMcastStormEntry 8 }
atcMcastStormAlarmFireTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected."
::= { atcMcastStormEntry 9 }
atcMcastStormAlarmClearTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected as
the normal traffic."
::= { atcMcastStormEntry 10 }
atcMcastStormTcApplyTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is activated."
::= { atcMcastStormEntry 11 }
atcMcastStormTcReleaseTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is released."
::= { atcMcastStormEntry 12 }
--
-- sysResourceMgt
--
-- monitor the configuration changes for the product
cpuStatus OBJECT IDENTIFIER ::= { sysResourceMgt 2 }
memoryStatus OBJECT IDENTIFIER ::= { sysResourceMgt 3 }
-- cpuStatus
cpuCurrentUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current CPU utilization in percent in the past 5 seconds."
::= { cpuStatus 1 }
cpuStatMaxUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum CPU utilization in percent in the past 60 seconds."
::= { cpuStatus 2 }
cpuStatAvgUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average CPU utilization in percent in the past 60 seconds."
::= { cpuStatus 3 }
cpuPeakTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the CPU utilization reaches cpuUtiRisingThreshold
in the format of 'Mmm _d hh:mm:ss yyyy' as defined
in sysCurrentTime of this MIB."
::= { cpuStatus 4 }
cpuPeakDuration OBJECT-TYPE
SYNTAX INTEGER
UNITS "second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration from the CPU utilization reaches cpuUtiRisingThreshold
to reaches cpuUtiFallingThreshold, in seconds."
::= { cpuStatus 5 }
cpuUtiRisingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rising threshold of the cpu utilization."
::= { cpuStatus 6 }
cpuUtiFallingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The falling threshold of the cpu utilization."
::= { cpuStatus 7 }
-- memoryStatus
memoryTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of the memory in kilobytes."
::= { memoryStatus 1 }
memoryAllocated OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the memory allocated in kilobytes."
::= { memoryStatus 2 }
memoryFreed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the free memory in kilobytes."
::= { memoryStatus 3}
memoryFreedInPercent OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the memory freed in proportion to the total memory."
::= { memoryStatus 4 }
memoryUtiRisingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rising threshold of the memory utilization."
::= { memoryStatus 5 }
memoryUtiFallingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The falling threshold of the memory utilization."
::= { memoryStatus 6 }
-- taskCpuTable
taskCpuTable OBJECT-TYPE
SYNTAX SEQUENCE OF TaskCpuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of descriptive and status information describing the
CPU utilization of each task."
::= { sysResourceMgt 4 }
taskCpuEntry OBJECT-TYPE
SYNTAX TaskCpuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, describing the CPU utilization of one
task."
INDEX { taskCpuName }
::= { taskCpuTable 1 }
TaskCpuEntry ::= SEQUENCE
{
taskCpuName DisplayString,
taskCpuCurrentUti Integer32,
taskCpuStatMaxUti Integer32,
taskCpuStatAvgUti Integer32
}
taskCpuName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of the task."
::= { taskCpuEntry 1 }
taskCpuCurrentUti OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current CPU utilization in hundredths of a percent in the
past 5 seconds."
::= { taskCpuEntry 2 }
taskCpuStatMaxUti OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum CPU utilization in hundredths of a percent in the
past 60 seconds."
::= { taskCpuEntry 3 }
taskCpuStatAvgUti OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average CPU utilization in hundredths of a percent in the
past 60 seconds."
::= { taskCpuEntry 4 }
-- cpuGuard
cpuGuard OBJECT IDENTIFIER ::= { sysResourceMgt 5 }
cpuGuardStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CPU guard status."
::= { cpuGuard 1 }
cpuGuardHighWatermark OBJECT-TYPE
SYNTAX Integer32 (20..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CPU guard high-watermark."
::= { cpuGuard 2 }
cpuGuardLowWatermark OBJECT-TYPE
SYNTAX Integer32 (20..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CPU guard low-watermark."
::= { cpuGuard 3 }
cpuGuardMaxThreshold OBJECT-TYPE
SYNTAX Integer32 (50..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CPU guard maximum threshold."
::= { cpuGuard 4 }
cpuGuardMinThreshold OBJECT-TYPE
SYNTAX Integer32 (50..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CPU guard minimum threshold."
::= { cpuGuard 5 }
cpuGuardTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CPU guard trap status."
::= { cpuGuard 6 }
cpuGuardCurrentThreshold OBJECT-TYPE
SYNTAX Integer32 (50..500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current CPU guard threshold."
::= { cpuGuard 7 }
--
--mvrMgt
--
mvrForwardingPriority OBJECT-TYPE
SYNTAX Integer32(0..7|65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure MVR multicast stream forwarding priority.
If value is 65535, it means the priority is disabled."
::= { mvrMgt 18 }
mvrDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MVR port."
::= { mvrMgt 20 }
mvrDomainEntry OBJECT-TYPE
SYNTAX MvrDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR Domain."
INDEX {mvrDomainId}
::= { mvrDomainTable 1 }
MvrDomainEntry ::= SEQUENCE
{
mvrDomainId Integer32,
mvrDomainStatus EnabledStatus,
mvrDomainRunningStatus INTEGER,
mvrDomainVlanId VlanIndex,
mvrDomainUpstreamSourceIp IpAddress,
mvrDomainClearDynamicGroups TruthValue
}
mvrDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Speicfies which MVR domain to configure."
::= { mvrDomainEntry 1 }
mvrDomainStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device."
::= { mvrDomainEntry 2}
mvrDomainRunningStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of active(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of inactive(2)
indicates that some necessary conditions in the MVR environment are
not satisfied."
::= { mvrDomainEntry 3}
mvrDomainVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB."
::= { mvrDomainEntry 4 }
mvrDomainUpstreamSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router
through MVR source port."
::= { mvrDomainEntry 5 }
mvrDomainClearDynamicGroups OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear dynamic learned groups"
::= { mvrDomainEntry 6}
mvrDomainPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MVR port."
::= { mvrMgt 21 }
mvrDomainPortEntry OBJECT-TYPE
SYNTAX MvrDomainPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR port."
INDEX {
mvrPortDomainId,
mvrDomainIfIndex
}
::= { mvrDomainPortTable 1 }
MvrDomainPortEntry ::= SEQUENCE
{
mvrPortDomainId Integer32,
mvrDomainIfIndex InterfaceIndex,
mvrDomainPortType INTEGER,
mvrDomainPortImmediateLeave EnabledStatus,
mvrDomainPortActive INTEGER,
mvrDomainPortImmediateLeaveByHostIp EnabledStatus
}
mvrPortDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Speicfies which MVR domain to configure."
::= { mvrDomainPortEntry 1 }
mvrDomainIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB."
::= { mvrDomainPortEntry 2 }
mvrDomainPortType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
source(1),
receiver(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "For configuring the MVR port type. To disable the MVR
port type, use the none(0)."
::= { mvrDomainPortEntry 3 }
mvrDomainPortImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable immediate leave on MVR port."
::= { mvrDomainPortEntry 4 }
mvrDomainPortActive OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2)."
::= { mvrDomainPortEntry 5 }
mvrDomainPortImmediateLeaveByHostIp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable immediate leave by host IP on MVR port."
::= { mvrDomainPortEntry 6 }
mvrProfileTable OBJECT IDENTIFIER ::= {mvrMgt 22 }
mvrProfileCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrProfileCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR profile."
::= { mvrProfileTable 1 }
MvrProfileCtlEntry ::= SEQUENCE
{
mvrProfileCtlId Integer32,
mvrProfileName OCTET STRING,
mvrProfileCtlAction INTEGER
}
mvrProfileCtlEntry OBJECT-TYPE
SYNTAX MvrProfileCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR profile."
INDEX {mvrProfileCtlId}
::= { mvrProfileCtlTable 1 }
mvrProfileCtlId OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrProfileCtlEntry 1 }
mvrProfileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MVR Profile name which identify a group range.
NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before
mvrProfileCtlAction really creat the profile."
::= { mvrProfileCtlEntry 2 }
mvrProfileCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to create(2) to create profile. Set this object
to destory(3) to delete profile. When
the action is complete, this object becomes noAction(1)."
::= { mvrProfileCtlEntry 5 }
mvrProfileGroupCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrProfileGroupCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR group ranges for MVR profile."
::= { mvrProfileTable 2 }
MvrProfileGroupCtlEntry ::= SEQUENCE
{
mvrProfileGropuCtlProfileId Integer32,
mvrProfileGroupCtlId Integer32,
mvrProfileGroupStartIPAddress IpAddress,
mvrProfileGroupEndIPAddress IpAddress,
mvrProfileGroupCtlAction INTEGER
}
mvrProfileGroupCtlEntry OBJECT-TYPE
SYNTAX MvrProfileGroupCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the group ranges on MVR profile."
INDEX {mvrProfileGropuCtlProfileId, mvrProfileGroupCtlId}
::= { mvrProfileGroupCtlTable 1 }
mvrProfileGropuCtlProfileId OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= {mvrProfileGroupCtlEntry 1}
mvrProfileGroupCtlId OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which group range in MVR profile"
::= { mvrProfileGroupCtlEntry 2 }
mvrProfileGroupStartIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MVR Profile range start IP address.
NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile."
::= { mvrProfileGroupCtlEntry 3}
mvrProfileGroupEndIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MVR Profile range end IP address.
NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile."
::= { mvrProfileGroupCtlEntry 4 }
mvrProfileGroupCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to create(2) to create group range. Set this object
to destory(3) to delete group range. When
the action is complete, this object becomes noAction(1).
NOTE: If mvrProfileGroupStartIPAddress and mvrProfileGroupEndIPAddress
pattern already exist on other mvrProfileGroupCtlId, it won't be stored.
"
::= { mvrProfileGroupCtlEntry 5 }
mvrDomainAssociatedProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainAssociatedProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure MVR domain associate which MVR profile"
::= {mvrMgt 23 }
mvrDomainAssociatedProfileEntry OBJECT-TYPE
SYNTAX MvrDomainAssociatedProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring MVR domain associate MVR profile."
INDEX {
mvrProfileDomainId,
mvrProfileId
}
::= { mvrDomainAssociatedProfileTable 1 }
MvrDomainAssociatedProfileEntry ::= SEQUENCE
{
mvrProfileDomainId Integer32,
mvrProfileId Integer32,
mvrProfileAction INTEGER
}
mvrProfileDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainAssociatedProfileEntry 1 }
mvrProfileId OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainAssociatedProfileEntry 2 }
mvrProfileAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to create(1) to associate profile. Set this object
to destory(2) to deassociate profile. When
the action is complete, this object becomes noAction(0)."
::= { mvrDomainAssociatedProfileEntry 3 }
mvrDomainGroupStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainGroupStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the static members of the
MVR group."
::= { mvrMgt 24 }
mvrDomainGroupStaticEntry OBJECT-TYPE
SYNTAX MvrDomainGroupStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the static members of the
MVR group."
INDEX {
mvrGroupStaticDomainId,
mvrDomainGroupStaticAddress,
mvrDomainGroupStaticReceiverVlan}
::= { mvrDomainGroupStaticTable 1 }
MvrDomainGroupStaticEntry ::= SEQUENCE
{
mvrGroupStaticDomainId Integer32,
mvrDomainGroupStaticAddress IpAddress,
mvrDomainGroupStaticReceiverVlan Integer32,
mvrDomainGroupStaticPorts PortList
}
mvrGroupStaticDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainGroupStaticEntry 1 }
mvrDomainGroupStaticAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrDomainGroupStaticEntry 2 }
mvrDomainGroupStaticReceiverVlan OBJECT-TYPE
SYNTAX Integer32(1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The receiver vlan of this MVR group"
::= { mvrDomainGroupStaticEntry 3 }
mvrDomainGroupStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The set of ports configured by management in this entry.
Ports entered in this list will be the static members
of this MVR group."
::= { mvrDomainGroupStaticEntry 4 }
mvrDomainGroupCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for the current members of the MVR group."
::= { mvrMgt 25 }
mvrDomainGroupCurrentEntry OBJECT-TYPE
SYNTAX MvrDomainGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for the current members of the MVR group."
INDEX {
mvrGroupCurrenDomainId,
mvrDomainGroupCurrentAddress,
mvrDomainGroupCurrentReceiverVlan
}
::= { mvrDomainGroupCurrentTable 1 }
MvrDomainGroupCurrentEntry ::= SEQUENCE
{
mvrGroupCurrenDomainId Integer32,
mvrDomainGroupCurrentAddress IpAddress,
mvrDomainGroupCurrentReceiverVlan Integer32,
mvrDomainGroupCurrentPorts PortList
}
mvrGroupCurrenDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainGroupCurrentEntry 1 }
mvrDomainGroupCurrentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrDomainGroupCurrentEntry 2 }
mvrDomainGroupCurrentReceiverVlan OBJECT-TYPE
SYNTAX Integer32(1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the receiver VLAN of the MVR group."
::= { mvrDomainGroupCurrentEntry 3 }
mvrDomainGroupCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The complete set of ports currently associated with this
MVR group."
::= { mvrDomainGroupCurrentEntry 4 }
mvrProxySwitching OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
Registration) proxy switching ability on the device. "
::= { mvrMgt 27 }
mvrRobustnessValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Paremete to set IGMP robustness value.
This value apply to proxy-switching for how many IGMP report/leave will be send out from source port,
and how many g-s query will be send on receiver port.
"
::= { mvrMgt 28 }
mvrProxyQueryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the query interval that active receiver port will use to send out general query "
::= { mvrMgt 29 }
mvrSourcePortmode OBJECT-TYPE
SYNTAX INTEGER
{
dynamic(1),
forward(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Paremete to set MVR Source Port forward mode.
When set dynamic, MVR source port won't forward multicast streams received from other source port.
When set forward, MVR source port will forward multicast streams received from other source port.
These multicast stream all are in MVR group range.
"
::= { mvrMgt 30 }
mvrPortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of service per port."
::= {mvrMgt 32 }
mvrPortStatisticsEntry OBJECT-TYPE
SYNTAX MvrPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of service per port."
INDEX { mvrPortStatisticsDomainId, mvrPortStatisticsPortIndex }
::= {mvrPortStatisticsTable 1}
MvrPortStatisticsEntry ::=
SEQUENCE {
mvrPortStatisticsDomainId Integer32,
mvrPortStatisticsPortIndex InterfaceIndex,
mvrPortStatisticsNumGroups Unsigned32,
mvrPortStatisticsNumJoinSend Unsigned32,
mvrPortStatisticsNumJoins Unsigned32,
mvrPortStatisticsNumJoinSuccess Unsigned32,
mvrPortStatisticsNumLeavesSend Unsigned32,
mvrPortStatisticsNumLeaves Unsigned32,
mvrPortStatisticsNumGeneralQuerySend Unsigned32,
mvrPortStatisticsNumGeneralQueryRecevied Unsigned32,
mvrPortStatisticsNumSepcificQuerySend Unsigned32,
mvrPortStatisticsNumSpecificQueryReceived Unsigned32,
mvrPortStatisticsNumInvalidReport Unsigned32,
mvrPortStatisticsClearStatistics TruthValue
}
mvrPortStatisticsDomainId OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR domain ID."
::= { mvrPortStatisticsEntry 1 }
mvrPortStatisticsPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port and the trunk (excluding trunk members)
interface of the mvrPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { mvrPortStatisticsEntry 2 }
mvrPortStatisticsNumGroups OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current learned groups "
::= { mvrPortStatisticsEntry 3 }
mvrPortStatisticsNumJoinSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join send "
::= { mvrPortStatisticsEntry 4 }
mvrPortStatisticsNumJoins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join recieved "
::= { mvrPortStatisticsEntry 5 }
mvrPortStatisticsNumJoinSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join group success "
::= { mvrPortStatisticsEntry 6 }
mvrPortStatisticsNumLeavesSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave send"
::= { mvrPortStatisticsEntry 7 }
mvrPortStatisticsNumLeaves OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave received "
::= { mvrPortStatisticsEntry 8}
mvrPortStatisticsNumGeneralQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query send. "
::= { mvrPortStatisticsEntry 9}
mvrPortStatisticsNumGeneralQueryRecevied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query received. "
::= { mvrPortStatisticsEntry 10}
mvrPortStatisticsNumSepcificQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query send. "
::= { mvrPortStatisticsEntry 11}
mvrPortStatisticsNumSpecificQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query received. "
::= { mvrPortStatisticsEntry 12}
mvrPortStatisticsNumInvalidReport OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid report received. "
::= { mvrPortStatisticsEntry 13}
mvrPortStatisticsClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear this VLAN all statistics "
::= { mvrPortStatisticsEntry 14}
mvrVlanStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrVlanStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Mvr statistics VLAN."
::= {mvrMgt 33 }
mvrVlanStatisticsEntry OBJECT-TYPE
SYNTAX MvrVlanStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of Mvr statistics VLAN."
INDEX { mvrVlanStatisticsDomainId, mvrVlanStatisticsVlanId }
::= {mvrVlanStatisticsTable 1}
MvrVlanStatisticsEntry ::=
SEQUENCE {
mvrVlanStatisticsDomainId Integer32,
mvrVlanStatisticsVlanId VlanIndex,
mvrVlanStatisticsNumGroups Unsigned32,
mvrVlanStatisticsNumJoinSend Unsigned32,
mvrVlanStatisticsNumJoins Unsigned32,
mvrVlanStatisticsNumJoinSuccess Unsigned32,
mvrVlanStatisticsNumLeavesSend Unsigned32,
mvrVlanStatisticsNumLeaves Unsigned32,
mvrVlanStatisticsNumGeneralQuerySend Unsigned32,
mvrVlanStatisticsNumGeneralQueryRecevied Unsigned32,
mvrVlanStatisticsNumSepcificQuerySend Unsigned32,
mvrVlanStatisticsNumSpecificQueryReceived Unsigned32,
mvrVlanStatisticsNumInvalidReport Unsigned32,
mvrVlanStatisticsClearStatistics TruthValue
}
mvrVlanStatisticsDomainId OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN ID"
::= { mvrVlanStatisticsEntry 1 }
mvrVlanStatisticsVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN ID"
::= { mvrVlanStatisticsEntry 2 }
mvrVlanStatisticsNumGroups OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current learned groups "
::= { mvrVlanStatisticsEntry 3 }
mvrVlanStatisticsNumJoinSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join send."
::= { mvrVlanStatisticsEntry 4 }
mvrVlanStatisticsNumJoins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join received "
::= { mvrVlanStatisticsEntry 5 }
mvrVlanStatisticsNumJoinSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of jion success "
::= { mvrVlanStatisticsEntry 6 }
mvrVlanStatisticsNumLeavesSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave send."
::= { mvrVlanStatisticsEntry 7 }
mvrVlanStatisticsNumLeaves OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave received "
::= { mvrVlanStatisticsEntry 8}
mvrVlanStatisticsNumGeneralQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query send "
::= { mvrVlanStatisticsEntry 9}
mvrVlanStatisticsNumGeneralQueryRecevied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query received "
::= { mvrVlanStatisticsEntry 10}
mvrVlanStatisticsNumSepcificQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query send"
::= { mvrVlanStatisticsEntry 11}
mvrVlanStatisticsNumSpecificQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of sepcific query received "
::= { mvrVlanStatisticsEntry 12}
mvrVlanStatisticsNumInvalidReport OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid report received"
::= { mvrVlanStatisticsEntry 13}
mvrVlanStatisticsClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear this VLAN statistics"
::= { mvrVlanStatisticsEntry 14}
--
-- dhcpSnoopMgt
--
-- Management of DHCP snooping and IP souce guard.
dhcpSnoopGlobal OBJECT IDENTIFIER ::= { dhcpSnoopMgt 1 }
dhcpSnoopVlan OBJECT IDENTIFIER ::= { dhcpSnoopMgt 2 }
dhcpSnoopInterface OBJECT IDENTIFIER ::= { dhcpSnoopMgt 3 }
dhcpSnoopBindings OBJECT IDENTIFIER ::= { dhcpSnoopMgt 4 }
dhcpSnoopStatistics OBJECT IDENTIFIER ::= { dhcpSnoopMgt 5 }
dhcpSnoopEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCP Snooping feature is
enabled."
::= { dhcpSnoopGlobal 1 }
dhcpSnoopVerifyMacAddressEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCP Snooping Mac address
verification is enabled."
::= { dhcpSnoopGlobal 2 }
dhcpSnoopInformationOptionEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCP snooping information option(option 82) feature is
enabled."
::= { dhcpSnoopGlobal 3 }
dhcpSnoopInformationOptionPolicy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates which reforwarding policy shall be used for DHCP
snooping information option(option 82). A value of drop(1) means to drop
the DHCP request packet which has the information option(option 82).
A value of keep(2) means to keep the existing information option(option 82)
of the DHCP request packet. A value of replace(3), which is the default value,
means to replace the existing information option(option 82) of the DHCP
request packet."
::= { dhcpSnoopGlobal 4 }
dhcpSnoopBindingsTableCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
store(2),
clear(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this to store(2) to store DHCP snooping binding entries to flash.
Set this to clear(3) to clear DHCP snooping binding entries from flash.
noAction(1) will always be obtained when reading this variable."
::= { dhcpSnoopGlobal 5 }
dhcpSnoopLimitRate OBJECT-TYPE
SYNTAX Integer32(0..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates the limit rate that DHCP packet redirected to CPU.
Set this to 0 means no rate limit for DHCP packet."
::= { dhcpSnoopGlobal 6}
dhcpSnoopInformationOptionEncodeFormat OBJECT-TYPE
SYNTAX INTEGER
{
extra-subtype-included(1),
no-extra-subtype-included(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set encode format for CID and RID in option82.
Set extra-subtype-included(1) will have extra subtype and length field in CID and RID.
Set no-extra-subtype-included(2) will only have TLV format for CID and RID."
::= { dhcpSnoopGlobal 7 }
--
dhcpSnoopVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains DHCP Snooping configurations of existing VLANs."
::= { dhcpSnoopVlan 1 }
dhcpSnoopVlanConfigEntry OBJECT-TYPE
SYNTAX DhcpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN."
INDEX { dhcpSnoopVlanIndex }
::= { dhcpSnoopVlanConfigTable 1 }
DhcpSnoopVlanConfigEntry ::= SEQUENCE
{
dhcpSnoopVlanIndex VlanIndex,
dhcpSnoopVlanEnable EnabledStatus
}
dhcpSnoopVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which DHCP Snooping
feature is configured."
::= { dhcpSnoopVlanConfigEntry 1 }
dhcpSnoopVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCP Snooping is enabled in
this VLAN."
::= { dhcpSnoopVlanConfigEntry 2 }
--
dhcpSnoopPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose."
::= { dhcpSnoopInterface 1 }
dhcpSnoopPortConfigEntry OBJECT-TYPE
SYNTAX DhcpSnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose."
INDEX { dhcpSnoopPortIfIndex }
::= { dhcpSnoopPortConfigTable 1 }
DhcpSnoopPortConfigEntry ::= SEQUENCE
{
dhcpSnoopPortIfIndex InterfaceIndex,
dhcpSnoopPortTrustEnable EnabledStatus,
dhcpSnoopPortMaxNumber Integer32
}
dhcpSnoopPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port or trunk."
::= { dhcpSnoopPortConfigEntry 1 }
dhcpSnoopPortTrustEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose."
::= { dhcpSnoopPortConfigEntry 2 }
dhcpSnoopPortMaxNumber OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates the max client number of per port."
::= { dhcpSnoopPortConfigEntry 6}
--
dhcpSnoopBindingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the DHCP bindings information learnt by
the device."
::= { dhcpSnoopBindings 1 }
dhcpSnoopBindingsEntry OBJECT-TYPE
SYNTAX DhcpSnoopBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status."
INDEX { dhcpSnoopBindingsIpAddress, dhcpSnoopBindingsMacAddress }
::= { dhcpSnoopBindingsTable 1 }
DhcpSnoopBindingsEntry ::= SEQUENCE
{
dhcpSnoopBindingsVlanIndex VlanIndex,
dhcpSnoopBindingsMacAddress MacAddress,
dhcpSnoopBindingsAddrType InetAddressType,
dhcpSnoopBindingsEntryType INTEGER,
dhcpSnoopBindingsIpAddress IpAddress,
dhcpSnoopBindingsPortIfIndex InterfaceIndex,
dhcpSnoopBindingsLeaseTime Unsigned32
}
dhcpSnoopBindingsVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the VLAN which a DHCP client host
belongs to."
::= { dhcpSnoopBindingsEntry 1 }
dhcpSnoopBindingsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the MAC address of a DHCP client
host."
::= { dhcpSnoopBindingsEntry 2 }
dhcpSnoopBindingsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type."
::= { dhcpSnoopBindingsEntry 3 }
dhcpSnoopBindingsEntryType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), static(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates that this binding is obtained from
dynamically learning or is a static configuraion."
::= { dhcpSnoopBindingsEntry 4 }
dhcpSnoopBindingsIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the allocated IP address of
a DHCP client host."
::= { dhcpSnoopBindingsEntry 5 }
dhcpSnoopBindingsPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the port or trunk where a DHCP client
host connects to."
::= { dhcpSnoopBindingsEntry 6 }
dhcpSnoopBindingsLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the leased time of this DHCP
bindings."
::= { dhcpSnoopBindingsEntry 7 }
--
dhcpSnoopTotalForwardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of packets subjected to
DHCP Snooping is forwarded."
::= { dhcpSnoopStatistics 1 }
dhcpSnoopUntrustedPortDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the number of packets subjected to DHCP Snooping
is dropped because they come from untrusted interface."
::= { dhcpSnoopStatistics 3 }
--
-- ipSrcGuardMgt
--
ipSrcGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the configurations to enable or disable
IP Source Guard at each port or trunk."
::= { ipSrcGuardMgt 1 }
ipSrcGuardConfigEntry OBJECT-TYPE
SYNTAX IpSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk."
INDEX { ipSrcGuardPortIfIndex }
::= { ipSrcGuardConfigTable 1 }
IpSrcGuardConfigEntry ::= SEQUENCE
{
ipSrcGuardPortIfIndex InterfaceIndex,
ipSrcGuardMode INTEGER
}
ipSrcGuardPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object idents the port or trunk which is capable of
IP Source Guard feature."
::= { ipSrcGuardConfigEntry 1 }
ipSrcGuardMode OBJECT-TYPE
SYNTAX INTEGER { diabled(0), srcIp(1), srcIpMac(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filtered by checking source ip.
If the value equals 2, it means Ip Source Guard is enabled
and packets are filtered by checking source ip and source mac."
::= { ipSrcGuardConfigEntry 2 }
--
ipSrcGuardAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSrcGuardAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the IP Source Guard ACL binding information
learned by the device or configured by the user."
::= { ipSrcGuardMgt 3 }
ipSrcGuardAclEntry OBJECT-TYPE
SYNTAX IpSrcGuardAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the IP address, Mac address, entry type,
VLAN number, interface number and status."
INDEX { ipSrcGuardAclBindingIpAddress,
ipSrcGuardAclBindingMacAddress,
ipSrcGuardAclBindingEntryType}
::= { ipSrcGuardAclTable 1 }
IpSrcGuardAclEntry ::= SEQUENCE
{
ipSrcGuardAclBindingIpAddress IpAddress,
ipSrcGuardAclBindingMacAddress MacAddress,
ipSrcGuardAclBindingEntryType INTEGER,
ipSrcGuardAclBindingVlanIndex VlanIndex,
ipSrcGuardAclBindingPortIfIndex InterfaceIndex,
ipSrcGuardAclBindingStatus RowStatus
}
ipSrcGuardAclBindingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the IP address of a ACL binding entry."
::= { ipSrcGuardAclEntry 1 }
ipSrcGuardAclBindingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the MAC address of a ACL binding entry."
::= { ipSrcGuardAclEntry 2 }
ipSrcGuardAclBindingEntryType OBJECT-TYPE
SYNTAX INTEGER { static(1), dhcp(2), bootp(3)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates that this binding is obtained from
dynamically learning or is a static configuraion."
::= { ipSrcGuardAclEntry 3 }
ipSrcGuardAclBindingVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the VLAN which a ACL binding belongs to."
::= { ipSrcGuardAclEntry 4 }
ipSrcGuardAclBindingPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the port or trunk where a ACL binding associated."
::= { ipSrcGuardAclEntry 5 }
ipSrcGuardAclBindingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is available for use by the
managed device; - 'notInService', which indicates that the
conceptual row exists in the agent, but is unavailable for use
by the managed device."
::= { ipSrcGuardAclEntry 6 }
--
-- dynamicArpInspectionMgt
--
daiGlobal OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 1 }
daiVlan OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 2 }
daiInterface OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 3 }
daiLog OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 4 }
daiStatistics OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 5 }
daiGlobalStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable dynamic ARP inspection.
Set disabled(2) to disable dynamic ARP inspection."
::= { daiGlobal 1 }
daiGlobalSrcMacValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of source MAC address.
Set disabled(2) to disable validation of source MAC
address."
::= { daiGlobal 2 }
daiGlobalDestMacValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of destination
MAC address. Set disabled(2) to disable validation
of destination MAC address."
::= { daiGlobal 3 }
daiGlobalIpAddrValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of IP address.
Set disabled(2) to disable validation of IP address."
::= { daiGlobal 4 }
daiGlobalLogNumber OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of log buffers for saving log message.
The value 0 means not generating system messages."
::= { daiGlobal 5 }
daiGlobalLogInterval OBJECT-TYPE
SYNTAX Integer32(0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the time interval for saving log messages."
::= { daiGlobal 6 }
daiGlobalAdditionalValidStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The vaule of this object is disabled(2) when the status of
daiGlobalSrcMacValidation, daiGlobalDestMacValidation,
and daiGlobalIpAddrValidation are disabled; enabled(1)
when one or more of these variables are enabled."
::= { daiGlobal 7 }
daiGlobalIpAddrValidationAllowZeros OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of IP address allow zeros.
Set disabled(2) to disable validation of IP address allow zeros."
::= { daiGlobal 8 }
daiVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains dynamic ARP inspection configurations
for existing VLANs."
::= { daiVlan 1 }
daiVlanEntry OBJECT-TYPE
SYNTAX DaiVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of dynamic ARP
inspection for each existing VLAN."
INDEX { daiVlanIndex }
::= { daiVlanTable 1 }
DaiVlanEntry ::= SEQUENCE
{
daiVlanIndex VlanIndex,
daiVlanStatus EnabledStatus,
daiVlanArpAclName DisplayString,
daiVlanArpAclStatus INTEGER
}
daiVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which dynamic ARP
inspection is configured."
::= { daiVlanEntry 1 }
daiVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether dynamic ARP inspection
is enabled in this VLAN."
::= { daiVlanEntry 2 }
daiVlanArpAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2)."
::= { daiVlanEntry 3 }
daiVlanArpAclStatus OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default value
of daiVlanArpAclStatus is dynamic(2)."
::= { daiVlanEntry 4 }
daiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing dynamic ARP inspection configurations
for port interfaces."
::= { daiInterface 1 }
daiPortEntry OBJECT-TYPE
SYNTAX DaiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of dynamic ARP
inspection at each port interface."
INDEX { daiPortIfIndex }
::= { daiPortTable 1 }
DaiPortEntry ::= SEQUENCE
{
daiPortIfIndex InterfaceIndex,
daiPortTrustStatus EnabledStatus,
daiPortRateLimit Unsigned32
}
daiPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port."
::= { daiPortEntry 1 }
daiPortTrustStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port is trusted for
dynamic ARP inspection."
::= { daiPortEntry 2 }
daiPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32(0..2048|'FFFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit."
::= { daiPortEntry 3 }
daiLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing dynamic ARP inspection log
information."
::= { daiLog 1 }
daiLogEntry OBJECT-TYPE
SYNTAX DaiLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing log information of dynamic ARP
inspection at each VLAN interface."
INDEX { daiLogIndex }
::= { daiLogTable 1 }
DaiLogEntry ::= SEQUENCE
{
daiLogIndex Integer32,
daiLogVlan VlanIndex,
daiLogPort InterfaceIndex,
daiLogSrcIpAddress IpAddress,
daiLogDestIpAddress IpAddress,
daiLogSrcMacAddress MacAddress,
daiLogDestMacAddress MacAddress
}
daiLogIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the index of dynamic ARP
inspection log information."
::= { daiLogEntry 1 }
daiLogVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the VLAN ID of dynamic ARP
inspection log information."
::= { daiLogEntry 2 }
daiLogPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the ifIndex of dynamic ARP
inspection log information."
::= { daiLogEntry 3 }
daiLogSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source IP address of dynamic ARP inspection
log information."
::= { daiLogEntry 4 }
daiLogDestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination IP address of dynamic ARP inspection
log information."
::= { daiLogEntry 5 }
daiLogSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source MAC address of dynamic ARP inspection
log information."
::= { daiLogEntry 6 }
daiLogDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination MAC address of dynamic ARP inspection
log information."
::= { daiLogEntry 7 }
daiTotalReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets received
before rate limiting."
::= { daiStatistics 1 }
daiTotalDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
due to rate limt."
::= { daiStatistics 2 }
daiTotalProcessedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets processed
by ARP inspection."
::= { daiStatistics 3 }
daiTotalSrcMacDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by source MAC address validation."
::= { daiStatistics 4 }
daiTotalDestMacDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by destination MAC address validation."
::= { daiStatistics 5 }
daiTotalIpAddrDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by IP address validation."
::= { daiStatistics 6 }
daiTotalArpAclDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by ARP ACL."
::= { daiStatistics 7 }
daiTotalDhcpSnoopingDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by DHCP snooping."
::= { daiStatistics 8 }
--
-- time range
--
timeRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TimeRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for time range."
::= { timeRangeMgt 1 }
timeRangeEntry OBJECT-TYPE
SYNTAX TimeRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for time range."
INDEX { timeRangeIndex }
::= { timeRangeTable 1 }
TimeRangeEntry ::= SEQUENCE
{
timeRangeIndex Integer32,
timeRangeName DisplayString,
timeRangeStatus ValidStatus
}
timeRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of time range entry."
::= { timeRangeEntry 1 }
timeRangeName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of time range entry."
::= { timeRangeEntry 2 }
timeRangeStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { timeRangeEntry 3 }
timeRangePeriodicTable OBJECT-TYPE
SYNTAX SEQUENCE OF TimeRangePeriodicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for periodic time-range entries."
::= { timeRangeMgt 2 }
timeRangePeriodicEntry OBJECT-TYPE
SYNTAX TimeRangePeriodicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for periodic time-range."
INDEX {
timeRangePeriodicTimeRangeIndex,
timeRangePeriodicStartDaysOfTheWeek,
timeRangePeriodicStartHours,
timeRangePeriodicStartMinutes,
timeRangePeriodicEndDaysOfTheWeek,
timeRangePeriodicEndHours,
timeRangePeriodicEndMinutes
}
::= { timeRangePeriodicTable 1 }
TimeRangePeriodicEntry ::= SEQUENCE
{
timeRangePeriodicTimeRangeIndex Integer32,
timeRangePeriodicStartDaysOfTheWeek INTEGER,
timeRangePeriodicStartHours Integer32,
timeRangePeriodicStartMinutes Integer32,
timeRangePeriodicEndDaysOfTheWeek INTEGER,
timeRangePeriodicEndHours Integer32,
timeRangePeriodicEndMinutes Integer32,
timeRangePeriodicStatus ValidStatus
}
timeRangePeriodicTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of time range. The object
should exist in timeRangeIndex of timeRangeTable."
::= { timeRangePeriodicEntry 1 }
timeRangePeriodicStartDaysOfTheWeek OBJECT-TYPE
SYNTAX INTEGER
{
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6),
daily(7),
weekdays(8),
weekend(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the start days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, Monday<61>K or Saturday
then the end days-of-the-week shall be set to Sunday, Monday<61>K, or Saturday.
1-1. If the start time is equal to the end time (for example: 09:00 - 09:00),
it means that the rule is active in the whole day.
1-2. If the end time is prior to the start time (for example: 05:00 - 01:00),
it means that the rule is inactive from 01:01 to 04:59.
2. If the start days-of-the-week is set to Daily, Weekdays, or Weekend,
then the end days-of-the-week shall be set the same as start,
and the start time shall be before the end time."
::= { timeRangePeriodicEntry 2 }
timeRangePeriodicStartHours OBJECT-TYPE
SYNTAX Integer32(0..23)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start hours of the periodic time-range entry."
::= { timeRangePeriodicEntry 3 }
timeRangePeriodicStartMinutes OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start minutess of the periodic time-range entry."
::= { timeRangePeriodicEntry 4 }
timeRangePeriodicEndDaysOfTheWeek OBJECT-TYPE
SYNTAX INTEGER
{
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6),
daily(7),
weekdays(8),
weekend(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the end days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, Monday<61>K or Saturday
then the end days-of-the-week shall be set to Sunday, Monday<61>K, or Saturday.
1-1. If the start time is equal to the end time (for example: 09:00 - 09:00),
it means that the rule is active in the whole day.
1-2. If the end time is prior to the start time (for example: 05:00 - 01:00),
it means that the rule is inactive from 01:01 to 04:59.
2. If the start days-of-the-week is set to Daily, Weekdays, or Weekend,
then the end days-of-the-week shall be set the same as start,
and the start time shall be before the end time."
::= { timeRangePeriodicEntry 5 }
timeRangePeriodicEndHours OBJECT-TYPE
SYNTAX Integer32(0..23)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end hours of the periodic time-range entry."
::= { timeRangePeriodicEntry 6 }
timeRangePeriodicEndMinutes OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end minutess of the periodic time-range entry."
::= { timeRangePeriodicEntry 7 }
timeRangePeriodicStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an periodic entry.
Setting this to invalid(2) destroys an periodic entry."
::= { timeRangePeriodicEntry 8 }
timeRangeAbsoluteTable OBJECT-TYPE
SYNTAX SEQUENCE OF TimeRangeAbsoluteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for absolute time-range entries."
::= { timeRangeMgt 3 }
timeRangeAbsoluteEntry OBJECT-TYPE
SYNTAX TimeRangeAbsoluteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for absolute time-range."
INDEX {
timeRangeAbsoluteTimeRangeIndex,
timeRangeAbsoluteStartYears,
timeRangeAbsoluteStartMonths,
timeRangeAbsoluteStartDays,
timeRangeAbsoluteStartHours,
timeRangeAbsoluteStartMinutes,
timeRangeAbsoluteEndYears,
timeRangeAbsoluteEndMonths,
timeRangeAbsoluteEndDays,
timeRangeAbsoluteEndHours,
timeRangeAbsoluteEndMinutes
}
::= { timeRangeAbsoluteTable 1 }
TimeRangeAbsoluteEntry ::= SEQUENCE
{
timeRangeAbsoluteTimeRangeIndex Integer32,
timeRangeAbsoluteStartYears Integer32,
timeRangeAbsoluteStartMonths Integer32,
timeRangeAbsoluteStartDays Integer32,
timeRangeAbsoluteStartHours Integer32,
timeRangeAbsoluteStartMinutes Integer32,
timeRangeAbsoluteEndYears Integer32,
timeRangeAbsoluteEndMonths Integer32,
timeRangeAbsoluteEndDays Integer32,
timeRangeAbsoluteEndHours Integer32,
timeRangeAbsoluteEndMinutes Integer32,
timeRangeAbsoluteStatus ValidStatus
}
timeRangeAbsoluteTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of time range. The object
should exist in timeRangeIndex of timeRangeTable."
::= { timeRangeAbsoluteEntry 1 }
timeRangeAbsoluteStartYears OBJECT-TYPE
SYNTAX Integer32(2013..2037|65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start years of the absolute time-range entry.
65535 means don't care."
::= { timeRangeAbsoluteEntry 2 }
timeRangeAbsoluteStartMonths OBJECT-TYPE
SYNTAX Integer32(1..12|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start months of the absolute time-range entry.
255 means don't care."
::= { timeRangeAbsoluteEntry 3 }
timeRangeAbsoluteStartDays OBJECT-TYPE
SYNTAX Integer32(1..31|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start days of the absolute time-range entry.
255 means don't care."
::= { timeRangeAbsoluteEntry 4 }
timeRangeAbsoluteStartHours OBJECT-TYPE
SYNTAX Integer32(0..23|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start hours of the absolute time-range entry.\
255 means don't care."
::= { timeRangeAbsoluteEntry 5 }
timeRangeAbsoluteStartMinutes OBJECT-TYPE
SYNTAX Integer32(0..59|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the start minutes of the absolute time-range entry.\
255 means don't care."
::= { timeRangeAbsoluteEntry 6 }
timeRangeAbsoluteEndYears OBJECT-TYPE
SYNTAX Integer32(2013..2037|65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end years of the absolute time-range entry.
65535 means don't care."
::= { timeRangeAbsoluteEntry 7 }
timeRangeAbsoluteEndMonths OBJECT-TYPE
SYNTAX Integer32(1..12|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end months of the absolute time-range entry.
255 means don't care."
::= { timeRangeAbsoluteEntry 8 }
timeRangeAbsoluteEndDays OBJECT-TYPE
SYNTAX Integer32(1..31|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end days of the absolute time-range entry.
255 means don't care."
::= { timeRangeAbsoluteEntry 9 }
timeRangeAbsoluteEndHours OBJECT-TYPE
SYNTAX Integer32(0..23|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end hours of the absolute time-range entry.\
255 means don't care."
::= { timeRangeAbsoluteEntry 10 }
timeRangeAbsoluteEndMinutes OBJECT-TYPE
SYNTAX Integer32(0..59|255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the end minutes of the absolute time-range entry.\
255 means don't care."
::= { timeRangeAbsoluteEntry 11 }
timeRangeAbsoluteStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an absolute entry.
Setting this to invalid(2) destroys an absolute entry."
::= { timeRangeAbsoluteEntry 12 }
--
-- lbdMgt
--
lbdGlobal OBJECT IDENTIFIER ::= { lbdMgt 1 }
lbdInterface OBJECT IDENTIFIER ::= { lbdMgt 2 }
lbdGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable global LBD status.
Set disabled(2) to disable global LBD status."
::= { lbdGlobal 1 }
lbdTransmitInterval OBJECT-TYPE
SYNTAX Unsigned32(1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The transmission interval for LBD control frames."
::= { lbdGlobal 2 }
lbdRecoverTime OBJECT-TYPE
SYNTAX Unsigned32(0|60..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The recover time used by LBD auto recovery mechanism. A
value of 0 disables auto recovery."
::= { lbdGlobal 3 }
lbdMode OBJECT-TYPE
SYNTAX INTEGER { port-based(1), vlan-based(2) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "The detection mode of LBD."
::= { lbdGlobal 4 }
lbdAction OBJECT-TYPE
SYNTAX INTEGER { none(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The protection action of LBD."
::= { lbdGlobal 5 }
lbdTrap OBJECT-TYPE
SYNTAX INTEGER { none(1), detect(2), recover(3), both(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The kind of SNMP traps for LBD will be sent."
::= { lbdGlobal 6 }
lbdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LbdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing LBD configurations for all interfaces."
::= { lbdInterface 1 }
lbdPortEntry OBJECT-TYPE
SYNTAX LbdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of LBD at each
interface."
INDEX { lbdPortIfIndex }
::= { lbdPortTable 1 }
LbdPortEntry ::= SEQUENCE
{
lbdPortIfIndex InterfaceIndex,
lbdPortAdminState INTEGER,
lbdPortOperState INTEGER,
lbdPortLoopedVlan OCTET STRING
}
lbdPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port."
::= { lbdPortEntry 1 }
lbdPortAdminState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The LBD administrative port status."
::= { lbdPortEntry 2 }
lbdPortOperState OBJECT-TYPE
SYNTAX INTEGER { normal(1), looped(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LBD operative port status."
::= { lbdPortEntry 3 }
lbdPortLoopedVlan OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The list of VLANs on which loopback is detected. Only when
oper state is looped and mode is VLAN-based, the value is
nonzero."
::= { lbdPortEntry 4 }
--
-- mldSnoopMgt
--
-- Management for MLD
-- Snooping.
mldSnoopStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MLD snooping on the device.
When enabled, the device will examine MLD packets and set
up filters for MLD ports. "
DEFVAL { disabled }
::= { mldSnoopMgt 1 }
mldSnoopQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables (disables) whether the switch acts as an MLD
querier."
DEFVAL { disabled }
::= { mldSnoopMgt 2 }
mldSnoopRobustness OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710."
DEFVAL { 2 }
::= { mldSnoopMgt 3 }
mldSnoopQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..125)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval (in seconds) between MLD host-query
messages sent by the switch."
DEFVAL { 125 }
::= { mldSnoopMgt 4 }
mldSnoopQueryMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by mldSnoopRobustness,
but an endstation has not responded, a countdown
timer is started using an initial value set by
mldSnoopQueryMaxResponseTime. If the countdown
finishes, and the endstation still has not responded,
then that the endstation is deemed to have
left the multicast group."
DEFVAL { 10 }
::= { mldSnoopMgt 5 }
mldSnoopRouterPortExpireTime OBJECT-TYPE
SYNTAX Integer32 (300..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires."
DEFVAL { 300 }
::= { mldSnoopMgt 6 }
mldSnoopVersion OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MLD version snooped"
DEFVAL { 1 }
::= { mldSnoopMgt 7 }
mldSnoopUnknownMcastMode OBJECT-TYPE
SYNTAX INTEGER
{
flood(1),
toRouterPort(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the mldSnoopUnknownMcastMode to define the flooding
behavior when receive the unknown multicast traffic."
::= { mldSnoopMgt 8 }
mldSnoopRouterCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for current router ports."
::= { mldSnoopMgt 9 }
mldSnoopRouterCurrentEntry OBJECT-TYPE
SYNTAX MldSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for current router ports."
INDEX { mldSnoopRouterCurrentVlanIndex }
::= {mldSnoopRouterCurrentTable 1 }
MldSnoopRouterCurrentEntry ::=
SEQUENCE {
mldSnoopRouterCurrentVlanIndex Unsigned32,
mldSnoopRouterCurrentPorts PortList
}
mldSnoopRouterCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopRouterStaticTable."
::= { mldSnoopRouterCurrentEntry 1 }
mldSnoopRouterCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are current router ports,
including static router ports. Please refer to
mldSnoopRouterStaticTable."
::= { mldSnoopRouterCurrentEntry 2 }
mldSnoopRouterStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for static router ports."
::= { mldSnoopMgt 10 }
mldSnoopRouterStaticEntry OBJECT-TYPE
SYNTAX MldSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for static router ports."
INDEX { mldSnoopRouterStaticVlanIndex }
::= { mldSnoopRouterStaticTable 1 }
MldSnoopRouterStaticEntry ::=
SEQUENCE {
mldSnoopRouterStaticVlanIndex Unsigned32,
mldSnoopRouterStaticPorts PortList,
mldSnoopRouterStaticStatus ValidStatus
}
mldSnoopRouterStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopRouterStaticTable."
::= { mldSnoopRouterStaticEntry 1 }
mldSnoopRouterStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The set of ports which are static router ports."
::= { mldSnoopRouterStaticEntry 2 }
mldSnoopRouterStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mldSnoopRouterStaticEntry 3 }
mldSnoopMulticastCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for current multicast addresses."
::= { mldSnoopMgt 11 }
mldSnoopMulticastCurrentEntry OBJECT-TYPE
SYNTAX MldSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for current multicast addresses."
INDEX { mldSnoopMulticastCurrentVlanIndex,
mldSnoopMulticastCurrentIpAddress,
mldSnoopMulticastCurrentSourceIpAddress }
::= { mldSnoopMulticastCurrentTable 1 }
MldSnoopMulticastCurrentEntry ::=
SEQUENCE {
mldSnoopMulticastCurrentVlanIndex Unsigned32,
mldSnoopMulticastCurrentIpAddress InetAddressIPv6,
mldSnoopMulticastCurrentSourceIpAddress InetAddressIPv6,
mldSnoopMulticastCurrentPorts PortList
}
mldSnoopMulticastCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopMulticastStaticTable."
::= { mldSnoopMulticastCurrentEntry 1 }
mldSnoopMulticastCurrentIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPv6 address of multicast group."
::= { mldSnoopMulticastCurrentEntry 2 }
mldSnoopMulticastCurrentSourceIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPv6 address of the source."
::= { mldSnoopMulticastCurrentEntry 3 }
mldSnoopMulticastCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are members of a multicast group,
including static members. Please refer to
mldSnoopMulticastStaticTable."
::= { mldSnoopMulticastCurrentEntry 4 }
mldSnoopMulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for static multicast addresses."
::= { mldSnoopMgt 12 }
mldSnoopMulticastStaticEntry OBJECT-TYPE
SYNTAX MldSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for static multicast addresses."
INDEX { mldSnoopMulticastStaticVlanIndex,
mldSnoopMulticastStaticIpAddress }
::= { mldSnoopMulticastStaticTable 1 }
MldSnoopMulticastStaticEntry ::=
SEQUENCE {
mldSnoopMulticastStaticVlanIndex Unsigned32,
mldSnoopMulticastStaticIpAddress InetAddressIPv6,
mldSnoopMulticastStaticPorts PortList,
mldSnoopMulticastStaticStatus ValidStatus
}
mldSnoopMulticastStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopMulticastStaticTable."
::= { mldSnoopMulticastStaticEntry 1 }
mldSnoopMulticastStaticIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPv6 address of multicast group."
::= { mldSnoopMulticastStaticEntry 2 }
mldSnoopMulticastStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The set of ports which are members."
::= { mldSnoopMulticastStaticEntry 3 }
mldSnoopMulticastStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mldSnoopMulticastStaticEntry 4 }
mldSnoopCurrentVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received."
::= { mldSnoopMgt 13 }
mldSnoopCurrentVlanEntry OBJECT-TYPE
SYNTAX MldSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for configuring MLD snooping."
INDEX { mldSnoopCurrentVlanIndex }
::= { mldSnoopCurrentVlanTable 1 }
MldSnoopCurrentVlanEntry ::= SEQUENCE
{
mldSnoopCurrentVlanIndex Unsigned32,
mldSnoopCurrentVlanImmediateLeave EnabledStatus,
mldSnoopCurrentVlanImmediateLeaveByHostIp EnabledStatus
}
mldSnoopCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { mldSnoopCurrentVlanEntry 1 }
mldSnoopCurrentVlanImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the
Immediate-Leave feature on this VLAN."
::= { mldSnoopCurrentVlanEntry 2 }
mldSnoopCurrentVlanImmediateLeaveByHostIp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the
Immediate-Leave by-host-ip feature on this VLAN."
::= { mldSnoopCurrentVlanEntry 3 }
mldSnoopProxyReporting OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MLD snooping proxy reporting
on the device."
DEFVAL { enabled }
::= { mldSnoopMgt 14 }
mldSnoopUnsolicitedReportInterval OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports."
DEFVAL { 400 }
::= { mldSnoopMgt 15 }
mldSnoopPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MLD Snooping service per port."
::= {mldSnoopMgt 16 }
mldSnoopPortEntry OBJECT-TYPE
SYNTAX MldSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of MLD Snooping service per port."
INDEX { mldSnoopPortIndex }
::= {mldSnoopPortTable 1}
MldSnoopPortEntry ::=
SEQUENCE {
mldSnoopPortIndex Unsigned32,
mldSnoopQueryDrop INTEGER,
mldSnoopMulticastDataDrop INTEGER,
mldSnoopPortNumGroups Unsigned32,
mldSnoopPortNumJoinSend Unsigned32,
mldSnoopPortNumJoins Unsigned32,
mldSnoopPortNumJoinSuccess Unsigned32,
mldSnoopPortNumLeavesSend Unsigned32,
mldSnoopPortNumLeaves Unsigned32,
mldSnoopPortNumGeneralQuerySend Unsigned32,
mldSnoopPortNumGeneralQueryRecevied Unsigned32,
mldSnoopPortNumSepcificQuerySend Unsigned32,
mldsnoopPortNumSpecificQueryReceived Unsigned32,
mldSnoopPortNumInvalidReport Unsigned32,
mldSnoopPortClearStatistics TruthValue
}
mldSnoopPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port and the trunk (excluding trunk members)
interface of the mldsnpPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { mldSnoopPortEntry 1 }
mldSnoopQueryDrop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable dropping MLD Query packet."
DEFVAL { disable }
::= { mldSnoopPortEntry 3 }
mldSnoopMulticastDataDrop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable dropping IPv6 multicast data "
DEFVAL { disable }
::= { mldSnoopPortEntry 4 }
mldSnoopPortNumGroups OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current learned groups "
::= { mldSnoopPortEntry 5 }
mldSnoopPortNumJoinSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join send "
::= { mldSnoopPortEntry 6 }
mldSnoopPortNumJoins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join recieved "
::= { mldSnoopPortEntry 7 }
mldSnoopPortNumJoinSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join group success "
::= { mldSnoopPortEntry 8 }
mldSnoopPortNumLeavesSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave send"
::= { mldSnoopPortEntry 9 }
mldSnoopPortNumLeaves OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave received "
::= { mldSnoopPortEntry 10}
mldSnoopPortNumGeneralQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query send. "
::= { mldSnoopPortEntry 11}
mldSnoopPortNumGeneralQueryRecevied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query received. "
::= { mldSnoopPortEntry 12}
mldSnoopPortNumSepcificQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query send. "
::= { mldSnoopPortEntry 13}
mldsnoopPortNumSpecificQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query received. "
::= { mldSnoopPortEntry 14}
mldSnoopPortNumInvalidReport OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid report received. "
::= { mldSnoopPortEntry 15}
mldSnoopPortClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear this VLAN all statistics "
::= { mldSnoopPortEntry 16}
mldSnoopFilterStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Parameter to enable or disable MLD filtering on the device."
::= { mldSnoopMgt 17 }
mldSnoopProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MLD snooping profile."
::= { mldSnoopMgt 18 }
mldSnoopProfileEntry OBJECT-TYPE
SYNTAX MldSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MLD snooping profile."
INDEX { mldSnoopProfileId }
::= { mldSnoopProfileTable 1 }
MldSnoopProfileEntry ::= SEQUENCE
{
mldSnoopProfileId Unsigned32,
mldSnoopProfileAction INTEGER,
mldSnoopProfileStatus ValidStatus
}
mldSnoopProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ID of the MLD snooping profile."
::= { mldSnoopProfileEntry 1 }
mldSnoopProfileAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The access mode of the MLD snooping profile."
DEFVAL { deny }
::= { mldSnoopProfileEntry 2 }
mldSnoopProfileStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mldSnoopProfileEntry 3 }
mldSnoopProfileCtl OBJECT IDENTIFIER ::= { mldSnoopMgt 19 }
mldSnoopProfileCtlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ID of the MLD snooping profile. The default value
is zero, meaning that no ID is specified. In order to
create a profile, a non-zero value must be specified."
::= { mldSnoopProfileCtl 1 }
mldSnoopProfileCtlInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { mldSnoopProfileCtl 2 }
mldSnoopProfileCtlStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled
IP multicast addresses."
::= { mldSnoopProfileCtl 3 }
mldSnoopProfileCtlEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled
IP multicast addresses."
::= { mldSnoopProfileCtl 4 }
mldSnoopProfileCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to create(2) creates the range of the
controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the
controlled IP multicast addresses.
When the action is completed, this object becomes
noAction(1)."
::= { mldSnoopProfileCtl 5 }
mldSnoopProfileRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the range of the MLD snooping
profile."
::= { mldSnoopMgt 20 }
mldSnoopProfileRangeEntry OBJECT-TYPE
SYNTAX MldSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the range of the MLD snooping
profile."
INDEX { mldSnoopProfileRangeProfileId,
mldSnoopProfileRangeInetAddressType,
mldSnoopProfileRangeStartInetAddress,
mldSnoopProfileRangeEndInetAddress
}
::= { mldSnoopProfileRangeTable 1 }
MldSnoopProfileRangeEntry ::= SEQUENCE
{
mldSnoopProfileRangeProfileId Unsigned32,
mldSnoopProfileRangeInetAddressType InetAddressType,
mldSnoopProfileRangeStartInetAddress InetAddress,
mldSnoopProfileRangeEndInetAddress InetAddress,
mldSnoopProfileRangeAction INTEGER
}
mldSnoopProfileRangeProfileId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as mldSnoopProfileId."
::= { mldSnoopProfileRangeEntry 1 }
mldSnoopProfileRangeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type is associated with this agent.
Only ipv6(2) type is supported."
::= { mldSnoopProfileRangeEntry 2 }
mldSnoopProfileRangeStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled
IPv6 multicast addresses."
::= { mldSnoopProfileRangeEntry 3 }
mldSnoopProfileRangeEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled
IPv6 multicast addresses."
::= { mldSnoopProfileRangeEntry 4 }
mldSnoopProfileRangeAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The access mode of the MLD snooping profile."
DEFVAL { deny }
::= { mldSnoopProfileRangeEntry 5 }
mldSnoopFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in MLD filtering."
::= { mldSnoopMgt 21 }
mldSnoopFilterPortEntry OBJECT-TYPE
SYNTAX MldSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in MLD filtering."
INDEX { mldSnoopFilterPortIndex }
::= { mldSnoopFilterPortTable 1 }
MldSnoopFilterPortEntry ::= SEQUENCE
{
mldSnoopFilterPortIndex Unsigned32,
mldSnoopFilterPortProfileId Integer32
}
mldSnoopFilterPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { mldSnoopFilterPortEntry 1 }
mldSnoopFilterPortProfileId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mldSnoopProfileEntry identified by a particular value of this index
is the same interface identified by the same value of the mldSnoopProfileId
object. If there is no corresponding entry in the mldSnoopProfileTable,
then no association exists. In particular, if this value is zero, no
associated profile will be generated, as zero is not a valid profile index."
::= { mldSnoopFilterPortEntry 2 }
mldSnoopThrottlePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in MLD throttling."
::= { mldSnoopMgt 22 }
mldSnoopThrottlePortEntry OBJECT-TYPE
SYNTAX MldSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in MLD throttling."
INDEX { mldSnoopThrottlePortIndex }
::= { mldSnoopThrottlePortTable 1 }
MldSnoopThrottlePortEntry ::= SEQUENCE
{
mldSnoopThrottlePortIndex Unsigned32,
mldSnoopThrottlePortRunningStatus INTEGER,
mldSnoopThrottlePortAction INTEGER,
mldSnoopThrottlePortMaxGroups Integer32,
mldSnoopThrottlePortCurrentGroups Integer32
}
mldSnoopThrottlePortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { mldSnoopThrottlePortEntry 1 }
mldSnoopThrottlePortRunningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of the MLD throttling to the switch.
A value of true(1) indicates the MLD throttling mechanism is active.
A value of false(2) indicates the MLD throttling mechanism is inactive."
::= { mldSnoopThrottlePortEntry 2 }
mldSnoopThrottlePortAction OBJECT-TYPE
SYNTAX INTEGER
{
replace(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action mode of the MLD throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an MLD report and the number of current joined multicast groups
is equal to the maximum number of MLD groups that the interface can join.
A value of deny(2) means to deny the MLD report request when an interface
receives an MLD report and the number of current joined multicast groups
is equal to the maximum number of MLD groups that the interface can join."
DEFVAL { deny }
::= { mldSnoopThrottlePortEntry 3 }
mldSnoopThrottlePortMaxGroups OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of MLD groups that the interface can join."
::= { mldSnoopThrottlePortEntry 4 }
mldSnoopThrottlePortCurrentGroups OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of MLD groups that the interface has joined."
::= { mldSnoopThrottlePortEntry 5}
mldSnoopClearDynamicGroups OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current number of MLD groups that the interface has joined."
::= { mldSnoopMgt 23}
mldSnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MLD Snooping service per port."
::= {mldSnoopMgt 24 }
mldSnoopVlanEntry OBJECT-TYPE
SYNTAX MldSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of MLD Snooping service per VLAN."
INDEX { mldSnoopVlanIndex }
::= {mldSnoopVlanTable 1}
MldSnoopVlanEntry ::=
SEQUENCE {
mldSnoopVlanIndex VlanIndex,
mldSnoopVlanNumGroups Unsigned32,
mldSnoopVlanNumJoinSend Unsigned32,
mldSnoopVlanNumJoins Unsigned32,
mldSnoopVlanNumJoinSuccess Unsigned32,
mldSnoopVlanNumLeavesSend Unsigned32,
mldSnoopVlanNumLeaves Unsigned32,
mldSnoopVlanNumGeneralQuerySend Unsigned32,
mldSnoopVlanNumGeneralQueryRecevied Unsigned32,
mldSnoopVlanNumSepcificQuerySend Unsigned32,
mldsnoopVlanNumSpecificQueryReceived Unsigned32,
mldSnoopVlanNumInvalidReport Unsigned32,
mldSnoopVlanClearStatistics TruthValue
}
mldSnoopVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN ID"
::= { mldSnoopVlanEntry 1 }
mldSnoopVlanNumGroups OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current learned groups "
::= { mldSnoopVlanEntry 2 }
mldSnoopVlanNumJoinSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join send."
::= { mldSnoopVlanEntry 3 }
mldSnoopVlanNumJoins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of join received "
::= { mldSnoopVlanEntry 4 }
mldSnoopVlanNumJoinSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of jion success "
::= { mldSnoopVlanEntry 5 }
mldSnoopVlanNumLeavesSend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave send."
::= { mldSnoopVlanEntry 6 }
mldSnoopVlanNumLeaves OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of leave received "
::= { mldSnoopVlanEntry 7}
mldSnoopVlanNumGeneralQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query send "
::= { mldSnoopVlanEntry 8}
mldSnoopVlanNumGeneralQueryRecevied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of general query received "
::= { mldSnoopVlanEntry 9}
mldSnoopVlanNumSepcificQuerySend OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of specific query send"
::= { mldSnoopVlanEntry 10}
mldsnoopVlanNumSpecificQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of sepcific query received "
::= { mldSnoopVlanEntry 11}
mldSnoopVlanNumInvalidReport OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid report received"
::= { mldSnoopVlanEntry 12}
mldSnoopVlanClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear this VLAN statistics"
::= { mldSnoopVlanEntry 13}
--
-- trap definitions
--
ecs2100-28ppTraps OBJECT IDENTIFIER ::= { ecs2100-28ppNotifications 1 }
ecs2100-28ppTrapsPrefix OBJECT IDENTIFIER ::= { ecs2100-28ppTraps 0 }
swPowerStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { swIndivPowerUnitIndex, swIndivPowerIndex, swIndivPowerStatus }
STATUS current
DESCRIPTION "This trap is sent when the power state changes."
::= { ecs2100-28ppTrapsPrefix 1 }
swPortSecurityTrap NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION "This trap is sent when the port is being intruded. This trap
will only be sent when the portSecActionTrap is enabled."
::= { ecs2100-28ppTrapsPrefix 36 }
swIpFilterRejectTrap NOTIFICATION-TYPE
OBJECTS { trapIpFilterRejectMode, trapIpFilterRejectIp }
STATUS current
DESCRIPTION "This trap is sent when an incorrect IP address is rejected by
the ipfilter."
::= { ecs2100-28ppTrapsPrefix 40 }
--poe traps start
pethPsePortOnOffNotification NOTIFICATION-TYPE
OBJECTS { pethPsePortDetectionStatus }
STATUS current
DESCRIPTION
" This Notification indicates if a Pse Port is delivering power to the PD. This notification SHOULD be sent on
every status change except in searching mode."
::= { ecs2100-28ppTrapsPrefix 43 }
pethPsePortPowerMaintenanceStatusNotification NOTIFICATION-TYPE
OBJECTS { pethPsePortPowerMaintenanceStatus }
STATUS current
DESCRIPTION
" This Notification indicates a Port Change Status and
SHOULD be sent on every status change."
::= { ecs2100-28ppTrapsPrefix 44 }
pethMainPowerUsageOnNotification NOTIFICATION-TYPE
OBJECTS { pethMainPseConsumptionPower }
STATUS current
DESCRIPTION
" This Notification indicates PSE Threshold usage indication is
on; the power usage is above the threshold."
::= { ecs2100-28ppTrapsPrefix 45 }
pethMainPowerUsageOffNotification NOTIFICATION-TYPE
OBJECTS { pethMainPseConsumptionPower }
STATUS current
DESCRIPTION
" This Notification indicates that the PSE Threshold usage indication
is off; the usage power is below the threshold."
::= { ecs2100-28ppTrapsPrefix 46 }
--poe traps end
--
-- ATC trap
--
swAtcBcastStormAlarmFireTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmFireThreshold
}
STATUS current
DESCRIPTION
"When the broadcast traffic is detected as the storm, this trap
will be fired."
::= { ecs2100-28ppTrapsPrefix 70 }
swAtcBcastStormAlarmClearTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmClearThreshold
}
STATUS current
DESCRIPTION
"When the broadcast storm is detected as the normal traffic, this
trap will be fired."
::= { ecs2100-28ppTrapsPrefix 71 }
swAtcBcastStormTcApplyTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmFireThreshold,
atcBcastStormTcApplyTime
}
STATUS current
DESCRIPTION
"When the ATC is activated, this trap will be fired."
::= { ecs2100-28ppTrapsPrefix 72 }
swAtcBcastStormTcReleaseTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmClearThreshold,
atcBcastStormTcReleaseTime
}
STATUS current
DESCRIPTION
"When the ATC is released, this trap will be fired."
::= { ecs2100-28ppTrapsPrefix 73 }
swAtcMcastStormAlarmFireTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmFireThreshold
}
STATUS current
DESCRIPTION
"When the multicast traffic is detected as the storm, this trap
will be fired."
::= { ecs2100-28ppTrapsPrefix 74 }
swAtcMcastStormAlarmClearTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmClearThreshold
}
STATUS current
DESCRIPTION
"When the multicast storm is detected as the normal traffic, this
trap will be fired."
::= { ecs2100-28ppTrapsPrefix 75 }
swAtcMcastStormTcApplyTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmFireThreshold,
atcMcastStormTcApplyTime
}
STATUS current
DESCRIPTION
"When the ATC is activated, this trap will be fired."
::= { ecs2100-28ppTrapsPrefix 76 }
swAtcMcastStormTcReleaseTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmClearThreshold,
atcMcastStormTcReleaseTime
}
STATUS current
DESCRIPTION
"When the ATC is released, this trap will be fired."
::= { ecs2100-28ppTrapsPrefix 77 }
stpBpduGuardPortShutdownTrap NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION "This trap will be sent when an interface is shut down
because of BPDU guard."
::= { ecs2100-28ppTrapsPrefix 91 }
swLoopbackDetectionTrap NOTIFICATION-TYPE
OBJECTS { staLoopbackDetectionPortIfIndex }
STATUS current
DESCRIPTION "This trap will be sent when loopback BPDUs have been detected."
::= { ecs2100-28ppTrapsPrefix 95 }
networkAccessPortLinkDetectionTrap NOTIFICATION-TYPE
OBJECTS {
ifIndex,
ifOperStatus,
networkAccessPortLinkDetectionMode,
networkAccessPortLinkDetectionAciton
}
STATUS current
DESCRIPTION "This trap is sent when a networkAccessPortLinkDetection
event is triggered."
::= { ecs2100-28ppTrapsPrefix 96 }
dot1agCfmMepUpTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a new remote MEP is discovered."
::= { ecs2100-28ppTrapsPrefix 97 }
dot1agCfmMepDownTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when port status or interface status TLV
received from remote MEP indicates it is not up."
::= { ecs2100-28ppTrapsPrefix 98 }
dot1agCfmConfigFailTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a MEP receives a CCM with MPID
which already exists on the same MA in this switch."
::= { ecs2100-28ppTrapsPrefix 99 }
dot1agCfmLoopFindTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a MEP receives its own CCMs."
::= { ecs2100-28ppTrapsPrefix 100 }
dot1agCfmMepUnknownTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a CCM is received from
an unexpected MEP."
::= { ecs2100-28ppTrapsPrefix 101 }
dot1agCfmMepMissingTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when the cross-check enable timer expires
and no CCMs were received from an expected (configured) MEP."
::= { ecs2100-28ppTrapsPrefix 102 }
dot1agCfmMaUpTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMaIndex
}
STATUS current
DESCRIPTION "This trap is sent when all expected remote MEPs are up."
::= { ecs2100-28ppTrapsPrefix 103 }
autoUpgradeTrap NOTIFICATION-TYPE
OBJECTS {
fileCopyFileType,
trapAutoUpgradeResult,
trapAutoUpgradeNewVer
}
STATUS current
DESCRIPTION "This trap is sent when auto upgrade is executed."
::= { ecs2100-28ppTrapsPrefix 104 }
swCpuUtiRisingNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the CPU utilization has risen
from cpuUtiFallingThreshold to cpuUtiRisingThreshold."
::= { ecs2100-28ppTrapsPrefix 107 }
swCpuUtiFallingNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the CPU utilization has fallen
from cpuUtiRisingThreshold to cpuUtiFallingThreshold."
::= { ecs2100-28ppTrapsPrefix 108 }
swMemoryUtiRisingThresholdNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the memory utilization has risen
from memoryUtiFallingThreshold to memoryUtiRisingThreshold."
::= { ecs2100-28ppTrapsPrefix 109 }
swMemoryUtiFallingThresholdNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the memory utilization has fallen
from memoryUtiRisingThreshold to memoryUtiFallingThreshold."
::= { ecs2100-28ppTrapsPrefix 110 }
dhcpRogueServerAttackTrap NOTIFICATION-TYPE
OBJECTS
{
trapDhcpClientPortIfIndex,
trapDhcpServerIpAddress,
trapDhcpServerMacAddress
}
STATUS current
DESCRIPTION "This trap is sent when receiving a DHCP packet from a
rogue server."
::= { ecs2100-28ppTrapsPrefix 114 }
macNotificationTrap NOTIFICATION-TYPE
OBJECTS
{
trapIfIndex,
trapVlanId,
trapVarMacAddr,
trapMacNotifyAction
}
STATUS current
DESCRIPTION "This trap is sent when there are changes of the
dynamic MAC addresses on the switch."
::= { ecs2100-28ppTrapsPrefix 138 }
lbdDetectionTrap NOTIFICATION-TYPE
OBJECTS {
trapIfIndex,
trapVlanId
}
STATUS current
DESCRIPTION "This trap is sent when a loopback condition is detected
by LBD."
::= { ecs2100-28ppTrapsPrefix 141 }
lbdRecoveryTrap NOTIFICATION-TYPE
OBJECTS {
trapIfIndex
}
STATUS current
DESCRIPTION "This trap is sent when a recovery is done by LBD."
::= { ecs2100-28ppTrapsPrefix 142 }
sfpThresholdAlarmWarnTrap NOTIFICATION-TYPE
OBJECTS
{
trapSfpThresholdAlarmWarnIfIndex,
trapSfpThresholdAlarmWarnType
}
STATUS current
DESCRIPTION
"This trap is sent when the sfp's A/D quantity is not within alarm/warning thresholds."
::= { ecs2100-28ppTrapsPrefix 189 }
udldPortShutdownTrap NOTIFICATION-TYPE
OBJECTS {
udldPortIndex,
trapUdldPortShutdownReason
}
STATUS current
DESCRIPTION "This trap is sent when the port is shut down by UDLD."
::= { ecs2100-28ppTrapsPrefix 192 }
userAuthenticationFailureTrap NOTIFICATION-TYPE
OBJECTS {
trapVarLoginUserName,
trapVarSessionType,
trapVarLoginInetAddressType,
trapVarLoginInetAddress
}
STATUS current
DESCRIPTION "This trap will be triggered if authentication is fail."
::= { ecs2100-28ppTrapsPrefix 199 }
userAuthenticationSuccessTrap NOTIFICATION-TYPE
OBJECTS {
trapVarLoginUserName,
trapVarSessionType,
trapVarLoginInetAddressType,
trapVarLoginInetAddress
}
STATUS current
DESCRIPTION "This trap will be triggered if authentication is successful."
::= { ecs2100-28ppTrapsPrefix 200 }
loginTrap NOTIFICATION-TYPE
OBJECTS {
trapVarLoginUserName,
trapVarSessionType,
trapVarLoginInetAddressType,
trapVarLoginInetAddress
}
STATUS current
DESCRIPTION "This trap is sent when user login."
::= { ecs2100-28ppTrapsPrefix 201 }
logoutTrap NOTIFICATION-TYPE
OBJECTS {
trapVarLoginUserName,
trapVarSessionType,
trapVarLoginInetAddressType,
trapVarLoginInetAddress
}
STATUS current
DESCRIPTION "This trap is sent when user logout."
::= { ecs2100-28ppTrapsPrefix 202 }
fileCopyTrap NOTIFICATION-TYPE
OBJECTS {
trapVarLoginUserName,
trapVarSessionType,
trapVarLoginInetAddressType,
trapVarLoginInetAddress,
fileCopySrcOperType,
fileCopySrcFileName,
fileCopyDestOperType,
fileCopyDestFileName,
fileCopyFileType,
fileCopyUnitId,
fileCopyStatus,
fileCopyServerInetAddressType,
fileCopyServerInetAddress
}
STATUS current
DESCRIPTION "This trap is sent when file copy is executed.
If the copy action is triggered by system,
the login user information(trapVarLoginUserName/
trapVarSessionType/trapVarLoginInetAddressTypes/
trapVarLoginInetAddres) will be null value."
::= { ecs2100-28ppTrapsPrefix 208 }
userauthCreateUserTrap NOTIFICATION-TYPE
OBJECTS {
userAuthUserName
}
STATUS current
DESCRIPTION "This trap is sent when create user account."
::= { ecs2100-28ppTrapsPrefix 209 }
userauthDeleteUserTrap NOTIFICATION-TYPE
OBJECTS {
userAuthUserName
}
STATUS current
DESCRIPTION "This trap is sent when delete user account."
::= { ecs2100-28ppTrapsPrefix 210 }
userauthModifyUserPrivilegeTrap NOTIFICATION-TYPE
OBJECTS {
userAuthUserName,
userAuthPrivilege
}
STATUS current
DESCRIPTION "This trap is sent when modify user privilege."
::= { ecs2100-28ppTrapsPrefix 211 }
cpuGuardControlTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION "This trap is sent when CPU utilization
rises above the high-watermark first time or when CPU utilization
rises from below the low-watermark to above the high-watermark."
::= { ecs2100-28ppTrapsPrefix 213 }
cpuGuardReleaseTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION "This trap is sent when CPU utilization falls from
above the high-watermark to below the low-watermark."
::= { ecs2100-28ppTrapsPrefix 214 }
END