mibs/MIBS/edgeswitch/EdgeSwitch-INVENTORY-MIB
2023-12-05 12:25:34 +01:00

1322 lines
48 KiB
Plaintext

EdgeSwitch-INVENTORY-MIB DEFINITIONS ::= BEGIN
-- Copyright Broadcom Inc (2003-2013) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Broadcom Inc's confidential and proprietary
-- intellectual property. Broadcom Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Broadcom Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32,
Unsigned32, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString,
RowStatus FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
fastPath FROM EdgeSwitch-REF-MIB;
fastPathInventory MODULE-IDENTITY
LAST-UPDATED "201310150000Z" -- 15 Oct 2013 12:00:00 GMT
ORGANIZATION "Broadcom Inc"
CONTACT-INFO ""
DESCRIPTION
"This MIB defines the objects used for FastPath to
configure and report information and status of units,
slots and supported cards."
-- Revision history.
REVISION
"201310150000Z" -- 15 Oct 2013 12:00:00 GMT
DESCRIPTION
"Object support modifications for LinuxHost systems."
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Ubiquiti branding related changes."
REVISION
"200410282037Z" -- Thu Jun 26 20:37:34 2003 GMT
DESCRIPTION
"Version 2 - Add support for Front Panel Stacking configuration."
REVISION
"200305261930Z" -- Thu Jun 26 19:30:54 2003 GMT
DESCRIPTION
"Initial version."
::= { fastPath 13 }
AgentInventoryUnitPreference ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the preference the unit has for being the
management unit in the stack. If the value is 0, it
indicates the unit is disabled for management."
SYNTAX INTEGER {
disabled(0),
unsassigned(1),
assigned(2)
}
AgentInventoryUnitType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"The Unit Type value for a given unit, displayed in hexadecimal."
SYNTAX Unsigned32
AgentInventoryCardType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"The Card Type value for a given card, displayed in hexadecimal."
SYNTAX Unsigned32
--**************************************************************************************
-- agentInventoryStackGroup
--
--**************************************************************************************
agentInventoryStackGroup OBJECT IDENTIFIER ::= { fastPathInventory 1 }
agentInventoryStackReplicateSTK OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiates STK copy from management unit to all other management capable units in
the stack."
::= { agentInventoryStackGroup 1 }
agentInventoryStackReload OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiates stack reload."
::= { agentInventoryStackGroup 2 }
agentInventoryStackMaxUnitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum allowed Unit Number configurable on the stack."
::= { agentInventoryStackGroup 3 }
agentInventoryStackReplicateSTKStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
notInProgress(2),
finishedWithSuccess(3),
finishedWithError(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of an STK copy from management unit to all other
management capable units inthe stack."
::= { agentInventoryStackGroup 4 }
agentInventoryStackSTKname OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(1),
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"STK file on management unit for copy/activate/delete operations to all units in the stack
unconfigured(1) - indicates a default state and can not be set."
::= { agentInventoryStackGroup 5 }
agentInventoryStackActivateSTK OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates the specified STK file on all units on the stack."
::= { agentInventoryStackGroup 6 }
agentInventoryStackDeleteSTK OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Deletes the specified STK file from all units on the stack."
::= { agentInventoryStackGroup 7 }
agentInventoryStackTemplateId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the stack template ID on all units in the stack. Deletes the startup configuration
on all affected units and resets all units in the stack.
This is write-only value. It always returns '0' on request."
::= { agentInventoryStackGroup 8 }
--**************************************************************************************
-- agentInventoryUnitGroup
--
--**************************************************************************************
agentInventoryUnitGroup OBJECT IDENTIFIER ::= { fastPathInventory 2 }
--**************************************************************************************
-- agentInventorySupportedUnitTable
--
--**************************************************************************************
agentInventorySupportedUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInventorySupportedUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TODO"
::= { agentInventoryUnitGroup 1 }
agentInventorySupportedUnitEntry OBJECT-TYPE
SYNTAX AgentInventorySupportedUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TODO"
INDEX { agentInventorySupportedUnitIndex }
::= { agentInventorySupportedUnitTable 1 }
AgentInventorySupportedUnitEntry ::=
SEQUENCE {
agentInventorySupportedUnitIndex
Unsigned32,
agentInventorySupportedUnitModelIdentifier
DisplayString,
agentInventorySupportedUnitDescription
DisplayString,
agentInventorySupportedUnitExpectedCodeVer
DisplayString
}
agentInventorySupportedUnitIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unit identifier associated with the supported unit."
::= { agentInventorySupportedUnitEntry 1 }
agentInventorySupportedUnitModelIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The model identifier for the supported unit."
::= { agentInventorySupportedUnitEntry 4 }
agentInventorySupportedUnitDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the supported unit."
::= { agentInventorySupportedUnitEntry 5 }
agentInventorySupportedUnitExpectedCodeVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The expected code version."
::= { agentInventorySupportedUnitEntry 6 }
--**************************************************************************************
-- agentInventoryUnitTable
--
--**************************************************************************************
agentInventoryUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInventoryUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Per-Unit configuration objects."
::= { agentInventoryUnitGroup 2 }
agentInventoryUnitEntry OBJECT-TYPE
SYNTAX AgentInventoryUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each Instance corresponds with a different unit managed by this agent."
INDEX { agentInventoryUnitNumber }
::= { agentInventoryUnitTable 1 }
AgentInventoryUnitEntry ::=
SEQUENCE {
agentInventoryUnitNumber
Unsigned32,
agentInventoryUnitAssignNumber
Unsigned32,
agentInventoryUnitType
AgentInventoryUnitType,
agentInventoryUnitSupportedUnitIndex
Unsigned32,
agentInventoryUnitMgmtAdmin
INTEGER,
agentInventoryUnitHWMgmtPref
AgentInventoryUnitPreference,
agentInventoryUnitHWMgmtPrefValue
Unsigned32,
agentInventoryUnitAdminMgmtPref
AgentInventoryUnitPreference,
agentInventoryUnitAdminMgmtPrefValue
Unsigned32,
agentInventoryUnitStatus
INTEGER,
agentInventoryUnitDetectedCodeVer
DisplayString,
agentInventoryUnitDetectedCodeInFlashVer
DisplayString,
agentInventoryUnitUpTime
TimeTicks,
agentInventoryUnitDescription
DisplayString,
agentInventoryUnitReplicateSTK
INTEGER,
agentInventoryUnitReload
INTEGER,
agentInventoryUnitRowStatus
RowStatus,
agentInventoryUnitSerialNumber
DisplayString,
agentInventoryUnitImage1Version
DisplayString,
agentInventoryUnitImage2Version
DisplayString,
agentInventoryUnitSTKname
INTEGER,
agentInventoryUnitActivateSTK
INTEGER,
agentInventoryUnitDeleteSTK
INTEGER,
agentInventoryUnitReplicateSTKStatus
INTEGER,
agentInventoryUnitStandby
INTEGER
,agentInventoryUnitSFSTransferStatus
INTEGER
,agentInventoryUnitSFSLastAttemptStatus
INTEGER
}
agentInventoryUnitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unit number associated with this unit."
::= { agentInventoryUnitEntry 1 }
agentInventoryUnitAssignNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows setting the unit number associated with this unit. This number must
be less than the value returned by agentInventoryStackMaxUnitNumber. Setting
this object to a non-zero value will initate unit renumbering. The switch will
be reset to perform unit renumbering and the configuration of switch interfaces
will be cleared. If the unit being renumbered is the manager of the stack, then
all the switches in the stack will be reset to perform Manager unit renumbering
and the configuration of Manager switch interfaces will be cleared."
::= { agentInventoryUnitEntry 2 }
agentInventoryUnitType OBJECT-TYPE
SYNTAX AgentInventoryUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Unit Type identifier for this unit."
::= { agentInventoryUnitEntry 3 }
agentInventoryUnitSupportedUnitIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the unit type in agentInventorySupportedUnitTable which this unit
is associated with."
::= { agentInventoryUnitEntry 4 }
agentInventoryUnitMgmtAdmin OBJECT-TYPE
SYNTAX INTEGER {
mgmtUnit(1),
stackUnit(2),
mgmtUnassigned(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the unit is a Management Unit, a Stack Unit, or has
been configured to be a Management Unit.
Setting this object to mgmtUnit(1) initiates transfer of the
management functionality to the specified stack unit. Object values
stackUnit(2) and mgmtUnassigned(3) cannot be set."
::= { agentInventoryUnitEntry 6 }
agentInventoryUnitHWMgmtPref OBJECT-TYPE
SYNTAX AgentInventoryUnitPreference
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the default preference assigned to the unit."
::= { agentInventoryUnitEntry 7 }
agentInventoryUnitHWMgmtPrefValue OBJECT-TYPE
SYNTAX Unsigned32 (0|1..15)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the default preference value assigned to the unit.
The preference value indicates how likely this unit is to be
chosen as the management unit. A value of 0 indicates a disabled
or unassigned preference."
::= { agentInventoryUnitEntry 8 }
agentInventoryUnitAdminMgmtPref OBJECT-TYPE
SYNTAX AgentInventoryUnitPreference
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Indicates the configured preference assigned to the unit. This object
can not be set to assigned(3). Setting this object to disabled(1),
or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0."
::= { agentInventoryUnitEntry 9 }
agentInventoryUnitAdminMgmtPrefValue OBJECT-TYPE
SYNTAX Unsigned32 (0|1..15)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Indicates the configured preference value assigned to the unit.
The preference value indicates how likely this unit is to be
chosen as the management unit. A value of 0 indicates a disabled
or unassigned preference. Setting this object to 0 will also set
agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object
to a non-zero value will set agentInventoryUnitHWMgmtPref to
assigned(3). This value overrides the value of
agentInventoryUnitHWMgmtPref if assigned."
::= { agentInventoryUnitEntry 10 }
agentInventoryUnitStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
unsupported(2),
codeMismatch(3),
configMismatch(4),
sdmMismatch(5),
notPresent(6),
codeUpdate(7)
,stmMismatch(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit status of this unit."
::= { agentInventoryUnitEntry 11 }
agentInventoryUnitDetectedCodeVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of code running on this unit. If the unit is not
detected then the code version is an empty string."
::= { agentInventoryUnitEntry 12 }
agentInventoryUnitDetectedCodeInFlashVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of code that is currently stored in FLASH
memory on the unit. This code will execute after the unit
is reset. If the unit is not detected then this object will
return an empty string."
::= { agentInventoryUnitEntry 13 }
agentInventoryUnitUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system up time of the unit."
::= { agentInventoryUnitEntry 14 }
agentInventoryUnitDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the unit."
::= { agentInventoryUnitEntry 15 }
agentInventoryUnitReplicateSTK OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiates the specified STK file copy from management unit to this unit."
::= { agentInventoryUnitEntry 16 }
agentInventoryUnitReload OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reload a specific unit in the stack."
::= { agentInventoryUnitEntry 17 }
agentInventoryUnitRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this unit instance. Creation of new instances requires the object
agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type
of of unit to pre-configure.
active(1) - This instance is active.
createAndGo(4) - Creates a new instance.
destroy(6) - Removes this instance."
::= { agentInventoryUnitEntry 18 }
agentInventoryUnitSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Serial Number of the unit."
::= { agentInventoryUnitEntry 19 }
agentInventoryUnitImage1Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Code version for Image1."
::= { agentInventoryUnitEntry 20 }
agentInventoryUnitImage2Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Code version for Image2."
::= { agentInventoryUnitEntry 21 }
agentInventoryUnitSTKname OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"STK file to be used for copy/delete/activate operatiosn."
::= { agentInventoryUnitEntry 22 }
agentInventoryUnitActivateSTK OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates the specified STK file on this unit."
::= { agentInventoryUnitEntry 23 }
agentInventoryUnitDeleteSTK OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Deletes the specified STK file on this unit."
::= { agentInventoryUnitEntry 24 }
agentInventoryUnitReplicateSTKStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
notInProgress(2),
finishedWithSuccess(3),
finishedWithError(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of an STK copy from the management unit to another
management capable unit in the stack."
::= { agentInventoryUnitEntry 25 }
agentInventoryUnitStandby OBJECT-TYPE
SYNTAX INTEGER {
unassigned(1),
standby-opr(2),
standby-cfg(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the standby status of this unit. The Management unit may not be
configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear
standby configuration. A unit that is standby_opr(2) may NOT be set to
unassigned(1)."
::= { agentInventoryUnitEntry 26 }
agentInventoryUnitSFSTransferStatus OBJECT-TYPE
SYNTAX INTEGER {
noAction(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status parameter to indicate stack firmware synchronization operation status for a particular unit.
If SFS transfer is in progress for a particular unit status will be inProgress(2),otherwise status will
be noAction(1)."
::= { agentInventoryUnitEntry 27 }
agentInventoryUnitSFSLastAttemptStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
success(2),
failure(3),
min-bootcode-version-not-present(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status parameter to indicate whether the last synchronization attempt
succeeded or failed.If SFS is initated for a particular unit and if it
completes successfully this object will return success(2),if SFS operation
failed lasttime for this unit,this object will return failure(3).if SFS did
not initiate for this unit,this object will retunrn none(1). If activation of
the image failed because the underlying bootcode version is older than the minimum boot
code version specified in the image, this object returns min-bootcode-version-not-met(4)"
::= { agentInventoryUnitEntry 28 }
--**************************************************************************************
-- agentInventorySlotGroup
--
--**************************************************************************************
agentInventorySlotGroup OBJECT IDENTIFIER ::= { fastPathInventory 3 }
--**************************************************************************************
-- agentInventorySlotTable
--
--**************************************************************************************
agentInventorySlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInventorySlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TODO"
::= { agentInventorySlotGroup 1 }
agentInventorySlotEntry OBJECT-TYPE
SYNTAX AgentInventorySlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TODO"
INDEX { agentInventoryUnitNumber, agentInventorySlotNumber }
::= { agentInventorySlotTable 1 }
AgentInventorySlotEntry ::=
SEQUENCE {
agentInventorySlotNumber
Unsigned32,
agentInventorySlotStatus
INTEGER,
agentInventorySlotPowerMode
INTEGER,
agentInventorySlotAdminMode
INTEGER,
agentInventorySlotInsertedCardType
AgentInventoryCardType,
agentInventorySlotConfiguredCardType
AgentInventoryCardType,
agentInventorySlotCapabilities
BITS
}
agentInventorySlotNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An incrimental index of the slot in this unit."
::= { agentInventorySlotEntry 1 }
agentInventorySlotStatus OBJECT-TYPE
SYNTAX INTEGER {
empty(1),
full(2),
error(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of the slot."
::= { agentInventorySlotEntry 3 }
agentInventorySlotPowerMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether a card in this slot will be powered on."
::= { agentInventorySlotEntry 4 }
agentInventorySlotAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether this card is administratively enabled or
disabled."
::= { agentInventorySlotEntry 5 }
agentInventorySlotInsertedCardType OBJECT-TYPE
SYNTAX AgentInventoryCardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the inserted card type. Will return 0 if the slot is
not full."
::= { agentInventorySlotEntry 6 }
agentInventorySlotConfiguredCardType OBJECT-TYPE
SYNTAX AgentInventoryCardType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the configured card type. This object may be set with a
corresponding value of agentInventoryCardType if this slot supports
removable cards."
::= { agentInventorySlotEntry 7 }
agentInventorySlotCapabilities OBJECT-TYPE
SYNTAX BITS {
pluggable(0),
power-down(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the different capabilities this slot has.
pluggable(0) - This slot can contain pluggable cards.
power-down(1) - Power to this slot can be controlled through the object
agentInventorySlotPowerMode
"
::= { agentInventorySlotEntry 8 }
--**************************************************************************************
-- agentInventoryCardGroup
--
--**************************************************************************************
agentInventoryCardGroup OBJECT IDENTIFIER ::= { fastPathInventory 4 }
--**************************************************************************************
-- agentInventoryCardTypeTable
--
--**************************************************************************************
agentInventoryCardTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInventoryCardTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information for all supported Card Types in the system."
::= { agentInventoryCardGroup 1 }
agentInventoryCardTypeEntry OBJECT-TYPE
SYNTAX AgentInventoryCardTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information related to a specific Card Type."
INDEX { agentInventoryCardIndex }
::= { agentInventoryCardTypeTable 1 }
AgentInventoryCardTypeEntry ::=
SEQUENCE {
agentInventoryCardIndex
Unsigned32,
agentInventoryCardType
AgentInventoryCardType,
agentInventoryCardModelIdentifier
DisplayString,
agentInventoryCardDescription
DisplayString
}
agentInventoryCardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index used to identify cards in the table."
::= { agentInventoryCardTypeEntry 1 }
agentInventoryCardType OBJECT-TYPE
SYNTAX AgentInventoryCardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Card Type associated with this instance."
::= { agentInventoryCardTypeEntry 2 }
agentInventoryCardModelIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The model identifier for the supported Card Type."
::= { agentInventoryCardTypeEntry 3 }
agentInventoryCardDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The card description for the supported Card Type."
::= { agentInventoryCardTypeEntry 4 }
--**************************************************************************************
-- agentInventoryComponentGroup
--
--**************************************************************************************
agentInventoryComponentGroup OBJECT IDENTIFIER ::= { fastPathInventory 5 }
--**************************************************************************************
-- agentInventoryComponentTable
--
--**************************************************************************************
agentInventoryComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInventoryComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information for all supported Components in the system."
::= { agentInventoryComponentGroup 1 }
agentInventoryComponentEntry OBJECT-TYPE
SYNTAX AgentInventoryComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information related to a specific Components."
INDEX { agentInventoryComponentIndex }
::= { agentInventoryComponentTable 1 }
AgentInventoryComponentEntry ::=
SEQUENCE {
agentInventoryComponentIndex
Unsigned32,
agentInventoryComponentMnemonic
DisplayString,
agentInventoryComponentName
DisplayString
}
agentInventoryComponentIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index used to reference components in the table."
::= { agentInventoryComponentEntry 1 }
agentInventoryComponentMnemonic OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The abreviated name of this component."
::= { agentInventoryComponentEntry 2 }
agentInventoryComponentName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the component for this instance."
::= { agentInventoryComponentEntry 3 }
--**************************************************************************************
-- agentInventoryStackPortGroup
--
--**************************************************************************************
agentInventoryStackPortGroup OBJECT IDENTIFIER ::= { fastPathInventory 7 }
agentInventoryStackPortIpTelephonyQOSSupport OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether the Stack Ports give higher priority to IP Telephony traffic."
::= { agentInventoryStackPortGroup 1 }
--**************************************************************************************
-- agentInventorySFSGroup
--
--**************************************************************************************
agentInventorySFSGroup OBJECT IDENTIFIER ::= { fastPathInventory 8 }
agentInventoryStackUnitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unit number associated with stack unit ."
::= { agentInventorySFSGroup 1 }
agentInventorySFS OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether the Stack Firmware Synchronization is enabled or disabled."
::= { agentInventorySFSGroup 2 }
agentInventorySFSAllowDowngrade OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether downgrading the image on the stack member is allowed or not if the firmware version of manager is older to firmware version of stack member"
::= { agentInventorySFSGroup 3 }
agentInventorySFSTrap OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls sending of traps during Stack firmware synchronization operation"
::= { agentInventorySFSGroup 4 }
--**************************************************************************************
-- agentInventoryStackPortTable
--
--**************************************************************************************
agentInventoryStackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInventoryStackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information for all Stack Ports present in the system."
::= { agentInventoryStackPortGroup 2 }
agentInventoryStackPortEntry OBJECT-TYPE
SYNTAX AgentInventoryStackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information related to a specific Stack Port."
INDEX { agentInventoryStackPortIndex }
::= { agentInventoryStackPortTable 1 }
AgentInventoryStackPortEntry ::=
SEQUENCE {
agentInventoryStackPortIndex
Unsigned32,
agentInventoryStackPortUnit
Unsigned32,
agentInventoryStackPortTag
DisplayString,
agentInventoryStackPortConfiguredStackMode
INTEGER,
agentInventoryStackPortRunningStackMode
INTEGER,
agentInventoryStackPortLinkStatus
INTEGER,
agentInventoryStackPortLinkSpeed
Gauge32,
agentInventoryStackPortDataRate
Counter32,
agentInventoryStackPortErrorRate
Counter32,
agentInventoryStackPortTotalErrors
Counter32
}
agentInventoryStackPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index used to reference Stack Ports in the table."
::= { agentInventoryStackPortEntry 1 }
agentInventoryStackPortUnit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Unit Index this Stack Port is physically located on."
::= { agentInventoryStackPortEntry 2 }
agentInventoryStackPortTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the Stack Port for this instance."
::= { agentInventoryStackPortEntry 3 }
agentInventoryStackPortConfiguredStackMode OBJECT-TYPE
SYNTAX INTEGER {
stack(1),
ethernet(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured mode of the Stack Port. Changes to this
value happen only after a reset of the switch."
::= { agentInventoryStackPortEntry 4 }
agentInventoryStackPortRunningStackMode OBJECT-TYPE
SYNTAX INTEGER {
stack(1),
ethernet(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Currently operational mode of the Stack Port."
::= { agentInventoryStackPortEntry 5 }
agentInventoryStackPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link status of the Stack Port. Ports which are in ethernet
mode will return a status of down(2)."
::= { agentInventoryStackPortEntry 6 }
agentInventoryStackPortLinkSpeed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Speed of the Stack Port measured in Gb/s. Ports which are
in ethernet mode will return a speed of 0."
::= { agentInventoryStackPortEntry 7 }
agentInventoryStackPortDataRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Approximate data rate on the stacking port. Measured in Gb/s.
Ports which are in ethernet mode will return 0."
::= { agentInventoryStackPortEntry 8 }
agentInventoryStackPortErrorRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Approximate error rate on the stack port. Measured in Errors
per Second. Ports which are in ethernet mode will return 0."
::= { agentInventoryStackPortEntry 9 }
agentInventoryStackPortTotalErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of errors since boot. The counter may wrap. Ports
which are in ethernet mode will return 0."
::= { agentInventoryStackPortEntry 10 }
--**************************************************************************************
-- agentInventory Traps
--
--**************************************************************************************
agentInventoryTraps OBJECT IDENTIFIER ::= { fastPathInventory 0 }
agentInventoryCardMismatch NOTIFICATION-TYPE
OBJECTS {
agentInventoryUnitNumber,
agentInventorySlotNumber,
agentInventorySlotInsertedCardType,
agentInventorySlotConfiguredCardType
}
STATUS current
DESCRIPTION
"Sent when a card is inserted which is a different type than
what the slot was configured for."
::= { agentInventoryTraps 1 }
agentInventoryCardUnsupported NOTIFICATION-TYPE
OBJECTS {
agentInventoryUnitNumber,
agentInventorySlotNumber,
agentInventorySlotInsertedCardType
}
STATUS current
DESCRIPTION
"Sent when a card is inserted which is of a type that is not
supported by the slot."
::= { agentInventoryTraps 2 }
agentInventoryStackPortLinkUp NOTIFICATION-TYPE
OBJECTS {
agentInventoryStackPortUnit,
agentInventoryStackPortTag
}
STATUS current
DESCRIPTION
"Sent when a Stack Port is connected to annother Stack Member."
::= { agentInventoryTraps 3 }
agentInventoryStackPortLinkDown NOTIFICATION-TYPE
OBJECTS {
agentInventoryStackPortUnit,
agentInventoryStackPortTag
}
STATUS current
DESCRIPTION
"Sent when a Stack Port is disconnected from annother Stack Member."
::= { agentInventoryTraps 4 }
agentInventorySFSStart NOTIFICATION-TYPE
OBJECTS {
agentInventoryStackUnitNumber
}
STATUS current
DESCRIPTION
"Sent when Stack Firmware Synchronization operation is started on a Stack Member."
::= { agentInventoryTraps 5 }
agentInventorySFSComplete NOTIFICATION-TYPE
OBJECTS {
agentInventoryStackUnitNumber
}
STATUS current
DESCRIPTION
"Sent when Stack Firmware Synchronization operation is complete on a Stack Member."
::= { agentInventoryTraps 6 }
agentInventorySFSFail NOTIFICATION-TYPE
OBJECTS {
agentInventoryStackUnitNumber
}
STATUS current
DESCRIPTION
"Sent when Stack Firmware Synchronization operation failed for a Stack Member."
::= { agentInventoryTraps 7 }
-- conformance information
fastPathInventoryConformance OBJECT IDENTIFIER ::= { fastPathInventory 6 }
fastPathInventoryCompliances OBJECT IDENTIFIER ::= { fastPathInventoryConformance 1 }
fastPathInventoryGroups OBJECT IDENTIFIER ::= { fastPathInventoryConformance 2 }
-- compliance statements
fastPathInventoryCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement
version 1 of the fastPathInventory MIB."
MODULE -- this module
MANDATORY-GROUPS {
fastPathInventorySlotGroup,
fastPathInventoryCardGroup,
fastPathInventoryCardGroup
}
GROUP fastPathInventoryUnitGroup
DESCRIPTION
"Implementation of the agentInventoryUnitTable is only mandatory
on systems which support the capability of managing multiple units
in a stack."
::= { fastPathInventoryCompliances 1 }
fastPathInventoryCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
version 2 of the fastPathInventory MIB."
MODULE -- this module
MANDATORY-GROUPS {
fastPathInventorySlotGroup,
fastPathInventoryCardGroup,
fastPathInventoryCardGroup
}
GROUP fastPathInventoryUnitGroup
DESCRIPTION
"Implementation of the agentInventoryUnitTable is only mandatory
on systems which support the capability of managing multiple units
in a stack."
::= { fastPathInventoryCompliances 2 }
-- MIB groupings
fastPathInventorySupportedUnitGroup OBJECT-GROUP
OBJECTS {
agentInventorySupportedUnitIndex,
agentInventorySupportedUnitModelIdentifier,
agentInventorySupportedUnitDescription,
agentInventorySupportedUnitExpectedCodeVer
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
multiple units in the stack."
::= { fastPathInventoryGroups 1 }
fastPathInventoryUnitGroup OBJECT-GROUP
OBJECTS {
agentInventoryUnitNumber,
agentInventoryUnitAssignNumber,
agentInventoryUnitType,
agentInventoryUnitMgmtAdmin,
agentInventoryUnitHWMgmtPref,
agentInventoryUnitAdminMgmtPref,
agentInventoryUnitStatus,
agentInventoryUnitDetectedCodeVer,
agentInventoryUnitDetectedCodeInFlashVer,
agentInventoryUnitUpTime,
agentInventoryUnitDescription,
agentInventoryUnitReplicateSTK,
agentInventoryUnitRowStatus
,agentInventoryUnitImage1Version
,agentInventoryUnitImage2Version
,agentInventoryUnitSTKname
,agentInventoryUnitActivateSTK
,agentInventoryUnitDeleteSTK
,agentInventoryUnitSTKname
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
multiple units in the stack."
::= { fastPathInventoryGroups 2 }
fastPathInventorySlotGroup OBJECT-GROUP
OBJECTS {
agentInventorySlotNumber,
agentInventorySlotStatus,
agentInventorySlotPowerMode,
agentInventorySlotAdminMode,
agentInventorySlotInsertedCardType,
agentInventorySlotConfiguredCardType
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
slots in the each unit managed by this agent."
::= { fastPathInventoryGroups 3 }
fastPathInventoryCardGroup OBJECT-GROUP
OBJECTS {
agentInventoryCardIndex,
agentInventoryCardType,
agentInventoryCardModelIdentifier,
agentInventoryCardDescription
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
the card types this system can manage."
::= { fastPathInventoryGroups 4 }
fastPathInventoryNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
agentInventoryCardMismatch,
agentInventoryCardUnsupported
}
STATUS current
DESCRIPTION
"The collection of notifications used to indicate problems
associated with the insertion of cards."
::= { fastPathInventoryGroups 5 }
END