2473 lines
95 KiB
Plaintext
2473 lines
95 KiB
Plaintext
CTRON-DECIV-ROUTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-deciv-router-mib.txt
|
|
-- Revision: 1.01.03
|
|
-- Part Number: 2170985
|
|
-- Date: August 11, 1995
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise specific DECnet Routing Services MIB.
|
|
--
|
|
-- This module will be extended as required.
|
|
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
|
|
-- Copyright August 95 Cabletron Systems
|
|
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
nwRtrProtoSuites
|
|
FROM ROUTER-OIDS
|
|
Counter, TimeTicks, Gauge
|
|
FROM RFC1155-SMI;
|
|
|
|
|
|
-- The DECnet Phase IV Router Group.
|
|
|
|
nwDecIVRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 3 }
|
|
|
|
nwDecIVMibs OBJECT IDENTIFIER ::= { nwDecIVRouter 1 }
|
|
nwDecIVComponents OBJECT IDENTIFIER ::= { nwDecIVRouter 2 }
|
|
|
|
|
|
-- DECnet Phase IV Router Component Groups
|
|
|
|
nwDecIVSystem OBJECT IDENTIFIER ::= { nwDecIVComponents 1 }
|
|
nwDecIVForwarding OBJECT IDENTIFIER ::= { nwDecIVComponents 2 }
|
|
nwDecIVTopology OBJECT IDENTIFIER ::= { nwDecIVComponents 4 }
|
|
nwDecIVFib OBJECT IDENTIFIER ::= { nwDecIVComponents 5 }
|
|
nwDecIVEndSystems OBJECT IDENTIFIER ::= { nwDecIVComponents 6 }
|
|
nwDecIVAccessControl OBJECT IDENTIFIER ::= { nwDecIVComponents 7 }
|
|
nwDecIVFilters OBJECT IDENTIFIER ::= { nwDecIVComponents 8 }
|
|
nwDecIVRedirector OBJECT IDENTIFIER ::= { nwDecIVComponents 9 }
|
|
nwDecIVEvent OBJECT IDENTIFIER ::= { nwDecIVComponents 10 }
|
|
nwDecIVWorkGroup OBJECT IDENTIFIER ::= { nwDecIVComponents 11 }
|
|
|
|
|
|
-- DECnet Phase IV Router System Groups
|
|
|
|
nwDecIVSysConfig OBJECT IDENTIFIER ::= { nwDecIVSystem 1 }
|
|
nwDecIVSysAdministration OBJECT IDENTIFIER ::= { nwDecIVSystem 2 }
|
|
|
|
|
|
-- DECnet Phase IV Router Forwarding Groups
|
|
|
|
nwDecIVFwdSystem OBJECT IDENTIFIER ::= { nwDecIVForwarding 1 }
|
|
nwDecIVFwdInterfaces OBJECT IDENTIFIER ::= { nwDecIVForwarding 2 }
|
|
|
|
nwDecIVFwdCounters OBJECT IDENTIFIER ::= { nwDecIVFwdSystem 1 }
|
|
nwDecIVFwdIfConfig OBJECT IDENTIFIER ::= { nwDecIVFwdInterfaces 1 }
|
|
nwDecIVFwdIfCounters OBJECT IDENTIFIER ::= { nwDecIVFwdInterfaces 2 }
|
|
|
|
|
|
-- DECnet Phase IV Router Routing Groups
|
|
|
|
nwDecIVDistanceVector OBJECT IDENTIFIER ::= { nwDecIVTopology 1 }
|
|
nwDecIVLinkState OBJECT IDENTIFIER ::= { nwDecIVTopology 2 }
|
|
|
|
nwDecIVProto OBJECT IDENTIFIER ::= { nwDecIVDistanceVector 1 }
|
|
nwDecIVProtoSystem OBJECT IDENTIFIER ::= { nwDecIVProto 1 }
|
|
nwDecIVProtoInterface OBJECT IDENTIFIER ::= { nwDecIVProto 2 }
|
|
|
|
nwDecIVProtoConfig OBJECT IDENTIFIER ::= { nwDecIVProtoSystem 1 }
|
|
nwDecIVProtoCounters OBJECT IDENTIFIER ::= { nwDecIVProtoSystem 2 }
|
|
nwDecIVProtoIfConfig OBJECT IDENTIFIER ::= { nwDecIVProtoInterface 1 }
|
|
nwDecIVProtoIfCounters OBJECT IDENTIFIER ::= { nwDecIVProtoInterface 2 }
|
|
|
|
-- DECnet Phase IV Router Host End Systems Groups
|
|
|
|
nwDecIVHostsSystem OBJECT IDENTIFIER ::= { nwDecIVEndSystems 1 }
|
|
nwDecIVHostsInterfaces OBJECT IDENTIFIER ::= { nwDecIVEndSystems 2 }
|
|
nwDecIVHostsToMedia OBJECT IDENTIFIER ::= { nwDecIVEndSystems 3 }
|
|
|
|
|
|
-- DECnet Phase IV Router Access Control Group
|
|
|
|
|
|
-- DECnet Phase IV Router Event Log Group
|
|
|
|
nwDecIVEventLogConfig OBJECT IDENTIFIER ::= { nwDecIVEvent 1 }
|
|
nwDecIVEventLogFilterTable OBJECT IDENTIFIER ::= { nwDecIVEvent 2 }
|
|
nwDecIVEventLogTable OBJECT IDENTIFIER ::= { nwDecIVEvent 3 }
|
|
|
|
-- DECnet Phase IV Router Work-Group Group
|
|
|
|
|
|
DecIVAddress ::= OCTET STRING
|
|
-- MacAddress ::= OCTET STRING (SIZE (6))
|
|
|
|
|
|
-- DECnet Phase IV MIB Group
|
|
-- This group contains information about the revision level of this
|
|
-- MIB within the device. It allows verification of the released
|
|
-- version without having to read other objects.
|
|
|
|
nwDecIVMibRevText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the DECnet Phase
|
|
IV MIB in textual format."
|
|
::= { nwDecIVMibs 1 }
|
|
|
|
|
|
-- DECnet Phase IV Router System Group
|
|
-- This group contains the objects related to the DECnet Phase IV Router at a
|
|
-- global device-wide level.
|
|
|
|
-- DECnet Phase IV System Configuration Group
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the DECnet Phase IV routing services at a global,
|
|
-- device-wide level.
|
|
|
|
nwDecIVSysRouterId OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DECnet Address used to uniquely identify the host (device)
|
|
running DECnet Phase IV Routing Services. Since DECnet Phase IV
|
|
uses a single address to identify the host and all of its router
|
|
ports, rather than using an address per router port,
|
|
nwDecIVSysRouterID is the DECnet node address for all the router
|
|
ports on the device."
|
|
::= { nwDecIVSysConfig 1 }
|
|
|
|
nwDecIVNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- not configured
|
|
routing-iv(2), -- level 1 router
|
|
area(3) -- level 2 router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the node type. Setting this value to 2, (routing-iv),
|
|
establishes the Routing Services-enabled device as a DECnet
|
|
Level 1, intra-area router. Setting this value to 2, establishes
|
|
the Routing Services-enabled device as a DECnet Phase IV Level 2,
|
|
or inter-area router."
|
|
DEFVAL { routing-iv }
|
|
::= { nwDecIVSysConfig 2 }
|
|
|
|
nwDecIVMaxNodes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of DECnet nodes allowed within an
|
|
area."
|
|
DEFVAL { 1023 }
|
|
::= { nwDecIVSysConfig 3 }
|
|
|
|
nwDecIVMaxBRA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of router adjacencies supported by
|
|
this node."
|
|
DEFVAL { 16 }
|
|
::= { nwDecIVSysConfig 4 }
|
|
|
|
nwDecIVMaxBEA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of endnode adjacencies supported
|
|
by this node."
|
|
DEFVAL { 64 }
|
|
::= { nwDecIVSysConfig 5 }
|
|
|
|
nwDecIVMaxHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of hops allowed for a valid route
|
|
within the area. Any intra-area route consisting of a greater
|
|
number of hops than specified by nwDecIVMaxHops is considered
|
|
unreachable."
|
|
DEFVAL { 30 }
|
|
::= { nwDecIVSysConfig 6 }
|
|
|
|
nwDecIVMaxCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum cost allowed for a valid route within the
|
|
area. Any intra-area route with a cost greater than nwDecIVMaxCost
|
|
is considered unreachable."
|
|
DEFVAL { 1022 }
|
|
::= { nwDecIVSysConfig 7 }
|
|
|
|
nwDecIVMaxVisits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of intra-area hops a packet can be
|
|
forwarded. A packet is dropped once it has been forwarded
|
|
nwDecIVMaxVisits."
|
|
DEFVAL { 63 }
|
|
::= { nwDecIVSysConfig 8 }
|
|
|
|
nwDecIVNonBroadcastTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the periodic interval (in seconds) at which DECnet
|
|
Routing Services advertises its route table, on any non-broadcast
|
|
networks attached to any router port configured and enabled for
|
|
DECnet Phase IV Routing Services."
|
|
DEFVAL { 1000 }
|
|
::= { nwDecIVSysConfig 9 }
|
|
|
|
nwDecIVBroadcastTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the periodic interval (in seconds) at which DECnet
|
|
Routing Services advertises its route table on any multi-access
|
|
broadcast networks attached to any router port configured and
|
|
enabled for DECnet Phase IV Routing Services."
|
|
DEFVAL { 1000 }
|
|
::= { nwDecIVSysConfig 10 }
|
|
|
|
nwDecIVAreas OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of areas allowed within a Level 2
|
|
(inter-area)routing domain."
|
|
DEFVAL { 63 }
|
|
::= { nwDecIVSysConfig 11 }
|
|
|
|
nwDecIVMaxAreaHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of areas that can be hopped by
|
|
a valid inter-area route. Any inter-area route requiring a
|
|
greater number of areas to be hopped than specified by
|
|
nwDecIVMaxAreaHops is considered invalid."
|
|
DEFVAL { 30 }
|
|
::= { nwDecIVSysConfig 12 }
|
|
|
|
nwDecIVMaxAreaCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum cost allowed for a valid Level 2
|
|
(inter-area) route. Any inter-area route with a cost greater than
|
|
nwDecIVMaxAreaCost is considered unreachable."
|
|
DEFVAL { 1022 }
|
|
::= { nwDecIVSysConfig 13 }
|
|
|
|
-- DECnet Phase IV System Administration Group
|
|
nwDecIVSysAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown DECnet routing services
|
|
enabled(3) -- startup DECnet routing services
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of DECnet Phase IV Routing Services,
|
|
system-wide. Enabled (3) causes DECnet Phase IV system-wide Routing
|
|
Services to become active on all router ports configured and enabled
|
|
for DECnet Phase IV Routing Services. Disabled (2) causes DECnet
|
|
Phase IV Routing Services to become inactive system-wide."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVSysAdministration 1 }
|
|
|
|
nwDecIVSysOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of DECnet Phase IV
|
|
Routing Services system-wide. The value of nwDecIVSysOperStatus
|
|
indicates any problem with your DECnet Phase IV Routing Services
|
|
configuration. A value of 6 indicates that regardless of the value
|
|
of nwDecIVSysAdminStatus, DECnet Phase IV Routing Services is not
|
|
operating because of an invalid configuration."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVSysAdministration 2 }
|
|
|
|
nwDecIVSysAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets DECnet Phase IV Routing Services, system-wide. Reset (2)
|
|
forces a restart of DECnet Phase IV Routing Services without a
|
|
graceful shutdown on any active router ports and without affecting
|
|
any other routing services."
|
|
DEFVAL { other }
|
|
::= { nwDecIVSysAdministration 3 }
|
|
|
|
nwDecIVSysOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVSysOperStatus has been in it's current state."
|
|
::= { nwDecIVSysAdministration 4 }
|
|
|
|
nwDecIVSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the DECnet Phase IV Routing
|
|
Services firmware, in textual format."
|
|
::= { nwDecIVSysAdministration 5 }
|
|
|
|
|
|
-- DECnet Phase IV Forwarding Group
|
|
-- This group contains the managed objects used to setup and configure
|
|
-- the DECnet Phase IV router network router ports for packet forwarding as well as
|
|
-- the aggregate and per-interface DECnet Phase IV packet forwarding counters.
|
|
|
|
-- DECnet Phase IV System-wide Packet Forwarding Counters
|
|
|
|
nwDecIVFwdCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- counters off
|
|
enabled(3) -- counters on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide)
|
|
DECnet packet and byte counters. Enabled (3) causes these counters
|
|
to become active. Disabled (2) causes these counters to become
|
|
inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVFwdCounters 1 }
|
|
|
|
nwDecIVFwdCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) DECnet packet and byte counters.
|
|
Reset (2) resets the DECnet aggregate counters to 0.
|
|
nwDecIVFwdCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVFwdCounters 2 }
|
|
|
|
nwDecIVFwdCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
DecIVFwdCtrOperStatus has been in the current state."
|
|
::= { nwDecIVFwdCounters 3 }
|
|
|
|
nwDecIVFwdCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
received, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 4 }
|
|
|
|
nwDecIVFwdCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 5 }
|
|
|
|
nwDecIVFwdCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
forwarded, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 6 }
|
|
|
|
nwDecIVFwdCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 7 }
|
|
|
|
nwDecIVFwdCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 8 }
|
|
|
|
nwDecIVFwdCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
|
|
because of addressing errors in the DECnet header."
|
|
::= { nwDecIVFwdCounters 9 }
|
|
|
|
nwDecIVFwdCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
|
|
because an invalid packet length is contained in the DECnet header."
|
|
::= { nwDecIVFwdCounters 10 }
|
|
|
|
nwDecIVFwdCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
|
|
because of an invalid DECnet header."
|
|
::= { nwDecIVFwdCounters 11 }
|
|
|
|
nwDecIVFwdCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been received, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 12 }
|
|
|
|
nwDecIVFwdCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been transmitted, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 13 }
|
|
|
|
nwDecIVFwdCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets
|
|
that have been forwarded, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 14 }
|
|
|
|
nwDecIVFwdCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been administratively filtered, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 15 }
|
|
|
|
nwDecIVFwdCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been discarded, system wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 16 }
|
|
|
|
nwDecIVFwdCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
successfully delivered to the local host, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 17 }
|
|
|
|
nwDecIVFwdCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted by the local host, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 18 }
|
|
|
|
nwDecIVFwdCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded by the local host, during nwDecIVFwdCtrOperationalTime,
|
|
due to a lack of host resources."
|
|
::= { nwDecIVFwdCounters 19 }
|
|
|
|
nwDecIVFwdCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been received by the local host, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 20 }
|
|
|
|
nwDecIVFwdCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been transmitted by the local host, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 21 }
|
|
|
|
nwDecIVFwdCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that have
|
|
been discarded by the local host, during
|
|
nwDecIVFwdCtrOperationalTime, due to a lack of host resources."
|
|
::= { nwDecIVFwdCounters 22 }
|
|
|
|
|
|
-- DECnet Phase IV Forwarding Interface Table
|
|
nwDecIVFwdIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. This table is
|
|
indexed by nwDecIVFwdIfIndex, which indicates the value of MIB 2
|
|
ifIndex, which identifies the router port for which each entry exists."
|
|
::= { nwDecIVFwdIfConfig 1 }
|
|
|
|
nwDecIVFwdIfEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the DECnet Phase IV Routing Services
|
|
configuration for the router port for which the entry exists."
|
|
INDEX { nwDecIVFwdIfIndex }
|
|
::= { nwDecIVFwdIfTable 1 }
|
|
|
|
NwDecIVFwdIfEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVFwdIfIndex INTEGER,
|
|
nwDecIVFwdIfAdminStatus INTEGER,
|
|
nwDecIVFwdIfOperStatus INTEGER,
|
|
nwDecIVFwdIfOperationalTime TimeTicks,
|
|
nwDecIVFwdIfControl INTEGER,
|
|
nwDecIVFwdIfMtu INTEGER,
|
|
nwDecIVFwdIfForwarding INTEGER,
|
|
nwDecIVFwdIfFrameType INTEGER,
|
|
nwDecIVFwdIfAclIdentifier INTEGER,
|
|
nwDecIVFwdIfAclStatus INTEGER,
|
|
nwDecIVFwdIfCacheControl INTEGER,
|
|
nwDecIVFwdIfCacheEntries Counter,
|
|
nwDecIVFwdIfCacheHits Counter,
|
|
nwDecIVFwdIfCacheMisses Counter
|
|
}
|
|
|
|
nwDecIVFwdIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfEntry 1 }
|
|
|
|
nwDecIVFwdIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of DECnet Phase IV Routing Services
|
|
on the router port for which the entry exists. Enabled (3) causes
|
|
DECnet Phase IV Routing Services to become active. Disabled (2)
|
|
causes it to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVFwdIfEntry 2 }
|
|
|
|
nwDecIVFwdIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of DECnet Phase IV
|
|
Routing Services on the router port for which the entry exists.
|
|
The value of nwDecIVFwdIfOperStatus indicates any problem with the
|
|
configuration of DECnet Phase IV Routing Services on the router port.
|
|
value of 6 indicates that regardless of the value of
|
|
nwDecIVFwdIfAdminStatus, DECnet Phase IV Routing Services is not
|
|
operating because of an invalid port-level configuration."
|
|
::= { nwDecIVFwdIfEntry 3 }
|
|
|
|
nwDecIVFwdIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVFwdIfOperStatus has been in its current state."
|
|
::= { nwDecIVFwdIfEntry 4 }
|
|
|
|
nwDecIVFwdIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
add(2), -- add this entry
|
|
delete(3) -- delete this entry
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { add }
|
|
::= { nwDecIVFwdIfEntry 5 }
|
|
|
|
nwDecIVFwdIfMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Maximum Transmission Unit (MTU) for DECnet packets on
|
|
the router port for which the entry exists. This includes the DECnet
|
|
header and data, but does not include framing."
|
|
DEFVAL { 1500 }
|
|
::= { nwDecIVFwdIfEntry 6 }
|
|
|
|
nwDecIVFwdIfForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not forwarding
|
|
enabled(3) -- forwarding
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the forwarding of DECnet packets on the router port for
|
|
which the entry exists. Enabled (3) causes DECnet packets to be
|
|
forwarded. Disabled (2) prevents DECnet packets from being forwarded."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVFwdIfEntry 7 }
|
|
|
|
nwDecIVFwdIfFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- ethernet, fddi, and token ring
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special media, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type for DECnet packets forwarded on the router
|
|
port for which the entry exists. Some frame types are only valid for
|
|
specific media types. The comments reflect those valid media types."
|
|
DEFVAL { ethernet }
|
|
::= { nwDecIVFwdIfEntry 8 }
|
|
|
|
nwDecIVFwdIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control list in
|
|
effect for DECnet packets being routed on the router port for which
|
|
the entry exists. A value of 0 indicates that no access control list
|
|
is in effect."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVFwdIfEntry 9 }
|
|
|
|
nwDecIVFwdIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- do not apply nwDecIVFwdIfAclIdentifier
|
|
enabled(3) -- apply nwDecIVFwdIfAclIdentifier
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of any access control list configured
|
|
for DECnet traffic on the router port for which the entry exists.
|
|
Enabled (3) applies the access control list indicated by the value
|
|
of nwDecIVFwdIfAclIdentifier to all DECnet traffic being routed on
|
|
the port. Disabled (2) prevents the access control list from being
|
|
applied."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVFwdIfEntry 10 }
|
|
|
|
nwDecIVFwdIfCacheControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the followin
|
|
disable(2), -- caching disabled
|
|
enable(3) -- caching enabled
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { enable }
|
|
::= { nwDecIVFwdIfEntry 11 }
|
|
|
|
nwDecIVFwdIfCacheEntries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common
|
|
object inherited from the MIB framework used to provide a
|
|
common management interface to all the Cabletron Routing
|
|
Services protocol-specific MIBs. Setting this object has no
|
|
effect."
|
|
::= { nwDecIVFwdIfEntry 12 }
|
|
|
|
nwDecIVFwdIfCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
::= { nwDecIVFwdIfEntry 13 }
|
|
|
|
nwDecIVFwdIfCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
::= { nwDecIVFwdIfEntry 14 }
|
|
|
|
|
|
-- DECnet Phase IV Forwarding Interfaces Counter Table
|
|
nwDecIVFwdIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port configured and
|
|
enabled for DECnet Phase IV Routing Services."
|
|
::= { nwDecIVFwdIfCounters 1 }
|
|
|
|
nwDecIVFwdIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of DECnet
|
|
packets on each router port for which the entry exists."
|
|
INDEX { nwDecIVFwdIfCtrIfIndex }
|
|
::= { nwDecIVFwdIfCtrTable 1 }
|
|
|
|
NwDecIVFwdIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVFwdIfCtrIfIndex INTEGER,
|
|
nwDecIVFwdIfCtrAdminStatus INTEGER,
|
|
nwDecIVFwdIfCtrReset INTEGER,
|
|
nwDecIVFwdIfCtrOperationalTime TimeTicks,
|
|
nwDecIVFwdIfCtrInPkts Counter,
|
|
nwDecIVFwdIfCtrOutPkts Counter,
|
|
nwDecIVFwdIfCtrFwdPkts Counter,
|
|
nwDecIVFwdIfCtrFilteredPkts Counter,
|
|
nwDecIVFwdIfCtrDiscardPkts Counter,
|
|
nwDecIVFwdIfCtrAddrErrPkts Counter,
|
|
nwDecIVFwdIfCtrLenErrPkts Counter,
|
|
nwDecIVFwdIfCtrHdrErrPkts Counter,
|
|
nwDecIVFwdIfCtrInBytes Counter,
|
|
nwDecIVFwdIfCtrOutBytes Counter,
|
|
nwDecIVFwdIfCtrFwdBytes Counter,
|
|
nwDecIVFwdIfCtrFilteredBytes Counter,
|
|
nwDecIVFwdIfCtrDiscardBytes Counter,
|
|
nwDecIVFwdIfCtrHostInPkts Counter,
|
|
nwDecIVFwdIfCtrHostOutPkts Counter,
|
|
nwDecIVFwdIfCtrHostDiscardPkts Counter,
|
|
nwDecIVFwdIfCtrHostInBytes Counter,
|
|
nwDecIVFwdIfCtrHostOutBytes Counter,
|
|
nwDecIVFwdIfCtrHostDiscardBytes Counter
|
|
}
|
|
|
|
nwDecIVFwdIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 1 }
|
|
|
|
nwDecIVFwdIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port DECnet packet and
|
|
byte counters on the router port for which the entry exists. Enabled
|
|
(3) causes these counters to become active. Disabled (2) causes
|
|
these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVFwdIfCtrEntry 2 }
|
|
|
|
nwDecIVFwdIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port DECnet packet and byte counters on the router
|
|
port for which the entry exists. Reset (2) resets the counters to 0.
|
|
nwDecIVFwdIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVFwdIfCtrEntry 3 }
|
|
|
|
nwDecIVFwdIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that the
|
|
per-port DECnet packet and byte counters have been active on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 4 }
|
|
|
|
nwDecIVFwdIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
received, during nwDecIVFwdIfCtrOperationaltime, on the router port
|
|
for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 5 }
|
|
|
|
nwDecIVFwdIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 6 }
|
|
|
|
nwDecIVFwdIfCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
forwarded on the router port for which the entry exists, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdIfCtrEntry 7 }
|
|
|
|
nwDecIVFwdIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
administratively filtered, during nwDecIVFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 8 }
|
|
|
|
nwDecIVFwdIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded (dropped), during nwDecIVFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 9 }
|
|
|
|
nwDecIVFwdIfCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded because of addressing errors in the DECnet header,
|
|
during nwDecIVFwdIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 10 }
|
|
|
|
nwDecIVFwdIfCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded because an invalid packet length was contained in the
|
|
DECnet header, during nwDecIVFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 11 }
|
|
|
|
nwDecIVFwdIfCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded because of an invalid DECnet header, during
|
|
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 12 }
|
|
|
|
nwDecIVFwdIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been received, during nwDecIVFwdIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 13 }
|
|
|
|
nwDecIVFwdIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that have
|
|
been transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 14 }
|
|
|
|
nwDecIVFwdIfCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been forwarded, during nwDecIVFwdIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 15 }
|
|
|
|
nwDecIVFwdIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been administratively filtered, during
|
|
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 16 }
|
|
|
|
nwDecIVFwdIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been discarded, during nwDecIVFwdIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 17 }
|
|
|
|
nwDecIVFwdIfCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
delivered to the local host, during nwDecIVFwdIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 18 }
|
|
|
|
nwDecIVFwdIfCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted by the local host, during nwDecIVFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 19 }
|
|
|
|
nwDecIVFwdIfCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded by the local host, during nwDecIVFwdIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 20 }
|
|
|
|
nwDecIVFwdIfCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been delivered to the local host, during
|
|
nwDecIVFwdIfCtrOperationalTime, that were received on the router port
|
|
for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 21 }
|
|
|
|
nwDecIVFwdIfCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been transmitted by the local host, during
|
|
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 22 }
|
|
|
|
nwDecIVFwdIfCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been discarded by the local host, due to a lack of host
|
|
resources, that were received on the router port for which the entry
|
|
exists, during nwDecIVFwdIfCtrOperationalTime."
|
|
::= { nwDecIVFwdIfCtrEntry 23 }
|
|
|
|
|
|
-- DistanceVector-based Protocols
|
|
-- This group contains the managed objects for DEC IV Routing Protocol, DEC IV
|
|
-- DistanceVector based routing.
|
|
|
|
-- DEC IV Proto System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the DEC IV Proto DistanceVector based routing protocol.
|
|
|
|
|
|
nwDecIVProtoAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the DECnet Phase IV
|
|
distance-vector-based routing protocol system-wide. Enabled (3)
|
|
causes the routing protocol to become active on all router ports
|
|
configured and enabled for DECnet Routing Services. Disabled (2)
|
|
causes the routing protocol to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoConfig 1 }
|
|
|
|
nwDecIVProtoOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running-invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the DECnet Phase
|
|
IV distance-vector-based routing protocol system-wide. The value
|
|
of nwDecIVProtoOperStatus indicates any problem with the DECnet
|
|
Phase IV distance-vector-based routing protocol configuration.
|
|
A value of 6 indicates that regardless of the value of
|
|
nwDecIVProtoAdminStatus, the DECnet Phase IV distance-vector-based
|
|
routing protocol is not operating because of an invalid configuration."
|
|
::= { nwDecIVProtoConfig 2 }
|
|
|
|
nwDecIVProtoAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the DECnet Phase IV distance-vector-based routing
|
|
protocol. Reset (2) forces a system-wide restart of the protocol
|
|
without a graceful shut-down on any active router ports."
|
|
DEFVAL { other }
|
|
::= { nwDecIVProtoConfig 3 }
|
|
|
|
nwDecIVProtoOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoOperStatus has been in current state."
|
|
::= { nwDecIVProtoConfig 4 }
|
|
|
|
nwDecIVProtoVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the DECnet Phase IV
|
|
distance-vector-based routing protocol firmware, in textual format."
|
|
::= { nwDecIVProtoConfig 5 }
|
|
|
|
nwDecIVProtoStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size of the DECnet Phase IV distance-vector-
|
|
based routing protocol thread. In order for a change of this value
|
|
to take effect, the protocol (nwDecIVProtoAdminReset), DECnet
|
|
Phase IV Routing Services (nwDecIVSysAdminReset), or the device
|
|
running Routing Services must be reset."
|
|
DEFVAL { 4096 }
|
|
::= { nwDecIVProtoConfig 6 }
|
|
|
|
nwDecIVProtoThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the DECnet Phase IV
|
|
distance-vector-based routing protocol thread. In order for a change
|
|
of this value to take effect, the protocol (nwDecIVProtoAdminReset),
|
|
DECnet Phase IV Routing Services (nwDecIVSysAdminReset), or the
|
|
device running Routing Services must be reset."
|
|
DEFVAL { 127 }
|
|
::= { nwDecIVProtoConfig 7 }
|
|
|
|
nwDecIVProtoDatabaseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { 2000 }
|
|
::= { nwDecIVProtoConfig 8 }
|
|
|
|
nwDecIVProtoAgeOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { 180 }
|
|
::= { nwDecIVProtoConfig 9 }
|
|
|
|
nwDecIVProtoHoldDown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect. "
|
|
DEFVAL { 120 }
|
|
::= { nwDecIVProtoConfig 10 }
|
|
|
|
|
|
-- DEC IV Routing Protocol System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) DEC IV Routing Protocol
|
|
-- packet and byte counters.
|
|
nwDecIVProtoCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- counters off
|
|
enabled(3) -- counters on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide) DECnet
|
|
Phase IV distance-vector-based routing protocol packet and byte
|
|
counters. Enabled (3) causes these counters to become active.
|
|
Disabled (2) causes these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoCounters 1 }
|
|
|
|
nwDecIVProtoCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) DECnet Phase IV
|
|
distance-vector-based routing protocol packet and byte counters.
|
|
Reset (2) resets the DECnet aggregate counters to 0.
|
|
nwDecIVProtoCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVProtoCounters 2 }
|
|
|
|
nwDecIVProtoCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoCtrAdminStatus has been in it's current state."
|
|
::= { nwDecIVProtoCounters 3 }
|
|
|
|
nwDecIVProtoCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been received, system-wide,
|
|
during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 4 }
|
|
|
|
nwDecIVProtoCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been transmitted, system-wide,
|
|
during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 5 }
|
|
|
|
nwDecIVProtoCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been administratively filtered,
|
|
system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 6 }
|
|
|
|
nwDecIVProtoCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of the DECnet Phase IV distance-vector
|
|
-based routing protocol packets that have been discarded,
|
|
system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 7 }
|
|
|
|
nwDecIVProtoCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector based routing protocol packets that have been
|
|
received, system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 8 }
|
|
|
|
nwDecIVProtoCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vectorbased routing protocol packets that have been
|
|
transmitted, system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 9 }
|
|
|
|
nwDecIVProtoCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vectorbased routing protocol packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 10 }
|
|
|
|
nwDecIVProtoCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vectorbased routing protocol packets that have been
|
|
discarded system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 11 }
|
|
|
|
|
|
-- DecIV Protocol Interface Table
|
|
nwDecIVProtoIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVProtoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each entry can
|
|
contain different values, allowing the routing protocol configuration
|
|
to vary from router port to router port. This table is indexed by
|
|
nwDecIVProtoIfIndex, which indicates the value of MIB 2 ifIndex,
|
|
which identifies the router port for which each entry exists."
|
|
::= { nwDecIVProtoIfConfig 1 }
|
|
|
|
nwDecIVProtoIfEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVProtoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the DECnet Phase IV distance-vector-based
|
|
routing protocol configuration for the router port for which the
|
|
entry exists."
|
|
INDEX { nwDecIVProtoIfIndex }
|
|
::= { nwDecIVProtoIfTable 1 }
|
|
|
|
NwDecIVProtoIfEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVProtoIfIndex INTEGER,
|
|
nwDecIVProtoIfAdminStatus INTEGER,
|
|
nwDecIVProtoIfOperStatus INTEGER,
|
|
nwDecIVProtoIfOperationalTime TimeTicks,
|
|
nwDecIVProtoIfVersion INTEGER,
|
|
nwDecIVProtoIfAdvertisement INTEGER,
|
|
nwDecIVProtoIfFloodDelay INTEGER,
|
|
nwDecIVProtoIfRequestDelay INTEGER,
|
|
nwDecIVProtoIfPriority INTEGER,
|
|
nwDecIVProtoIfHelloTimer INTEGER,
|
|
nwDecIVProtoIfSplitHorizon INTEGER,
|
|
nwDecIVProtoIfPoisonReverse INTEGER,
|
|
nwDecIVProtoIfSnooping INTEGER,
|
|
nwDecIVProtoIfType INTEGER,
|
|
nwDecIVProtoIfXmitCost INTEGER,
|
|
nwDecIVProtoIfAclIdentifier INTEGER,
|
|
nwDecIVProtoIfAclStatus INTEGER
|
|
}
|
|
|
|
nwDecIVProtoIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfEntry 1 }
|
|
|
|
nwDecIVProtoIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the DECnet Phase IV
|
|
distance-vector-based routing protocol on the router port for which
|
|
the entry exists. Enabled (3) causes the routing protocol to become
|
|
active on the router port. Disabled (2) causes it to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoIfEntry 2 }
|
|
|
|
nwDecIVProtoIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the DECnet Phase IV
|
|
distance-vector-based routing protocol on the router port for which
|
|
the entry exists. The value of nwDecIVProtoIfOperStatus indicates
|
|
any problem with your routing protocol configuration on the router
|
|
port. A value of 6 indicates that regardless of the value of
|
|
nwDecIVProtoIfAdminStatus, the routing protocol is not operating
|
|
because of an invalid configuration."
|
|
::= { nwDecIVProtoIfEntry 3 }
|
|
|
|
nwDecIVProtoIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoIfOperStatus has been in it`s current state."
|
|
::= { nwDecIVProtoIfEntry 4 }
|
|
|
|
nwDecIVProtoIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the revision level of the DECnet Phase IV
|
|
distance-vector-based routing protocol firmware on the router port
|
|
for which the entry exists, in textual format."
|
|
DEFVAL { 3 }
|
|
::= { nwDecIVProtoIfEntry 5 }
|
|
|
|
nwDecIVProtoIfAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which the DECnet Phase IV
|
|
distance-vectorbased routing protocol advertises its route table on
|
|
the router port for which the entry exists. Change this value to
|
|
cause the DECnet Phase IV distance-vector-based routing protocol to
|
|
advertise its route table more or less frequently on the router port."
|
|
DEFVAL { 40 }
|
|
::= { nwDecIVProtoIfEntry 6 }
|
|
|
|
nwDecIVProtoIfFloodDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { 2 }
|
|
::= { nwDecIVProtoIfEntry 7 }
|
|
|
|
nwDecIVProtoIfRequestDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVProtoIfEntry 8 }
|
|
|
|
nwDecIVProtoIfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the priority of the DECnet Phase IV distance-vector-based
|
|
routing protocol on the router port for which the entry exists.
|
|
Within an area, the router with the highest value for
|
|
nwDecIVProtoIfPriority becomes the priority or designated router.
|
|
The highest possible value for nwDecIVProtocolIfPriority is 127. Set
|
|
this value high to cause your DECnet Phase IV Routing Services-enabled
|
|
device to become the designated router. Set this value low to guarantee
|
|
that it does not become the designated router."
|
|
DEFVAL { 64 }
|
|
::= { nwDecIVProtoIfEntry 9 }
|
|
|
|
nwDecIVProtoIfHelloTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which DECnet Phase IV
|
|
distance-vector-based routing protocol sends Hello packets on the
|
|
router port for which the entry exists."
|
|
DEFVAL { 15 }
|
|
::= { nwDecIVProtoIfEntry 10 }
|
|
|
|
nwDecIVProtoIfSplitHorizon OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- Split Horizon off
|
|
enabled(3) -- Split Horizon on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoIfEntry 11 }
|
|
|
|
nwDecIVProtoIfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVProtoIfEntry 12 }
|
|
|
|
nwDecIVProtoIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- Snooping off
|
|
enabled(3) -- Snooping on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of DECnet Phase IV distance-vector-based
|
|
routing protocol snooping on the router port. When snooping is
|
|
enabled the DECnet Phase IV distance-vector-based routing protocol
|
|
operates in passive mode, so that it receives route information,
|
|
builds and maintains a route table, but does not advertise the route
|
|
table or send updates on the router port for which the entry exists."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVProtoIfEntry 13 }
|
|
|
|
nwDecIVProtoIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
bma(2), -- broadcast media access
|
|
nbma(3) -- non-broadcast media access
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the directly connected network segment does or
|
|
does not support broadcast media access."
|
|
DEFVAL { bma }
|
|
::= { nwDecIVProtoIfEntry 14 }
|
|
|
|
nwDecIVProtoIfXmitCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the cost of transmitting a packet on the network segment
|
|
connected to the router port for which the entry exists. The DECnet
|
|
Phase IV distance-vector-based routing protocol picks the route with
|
|
the least total nwDecIVProtoIfXmitCost as the best route. If
|
|
nwDecIVProtocolIfXmitCost, also known as path cost, is the same for
|
|
all possible routes , the best route chosen is the route with the
|
|
least number of hops is chosen as the best route."
|
|
DEFVAL { 1 }
|
|
::= { nwDecIVProtoIfEntry 15 }
|
|
|
|
nwDecIVProtoIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control list in
|
|
effect for DECnet Phase IV distance-vector-based routing protocol
|
|
packets on the router port for which the entry exists. A value of 0
|
|
indicates that there is no access control list in effect for DECnet
|
|
Phase IV distance-vector-based routing protocol packets on the router
|
|
port."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVProtoIfEntry 16 }
|
|
|
|
nwDecIVProtoIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- do not apply nwDecIVProtoIfAcl
|
|
enabled(3) -- apply nwDecIVProtoIfAcl
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access control list identified by
|
|
nwDecIVProtoIfAclIdentifier. Enabled (3) applies the access control
|
|
list to all DECnet Phase IV distance-vector-based routing protocol
|
|
packet traffic on the router port for which the entry exists. Disabled
|
|
(2) prevents the access control list from being applied."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVProtoIfEntry 17 }
|
|
|
|
|
|
-- Dec IV Protocol Interface Counters Table
|
|
-- This table contains the managed objects for DEC IV protocols packet and
|
|
-- byte counter on a per router port basis.
|
|
nwDecIVProtoIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVProtoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. This table is
|
|
indexed by nwDecIVProtoIfCtrIfIndex which indicates the value of
|
|
MIB2 ifindex, which identifies the router port for which the entry
|
|
exists."
|
|
::= { nwDecIVProtoIfCounters 1 }
|
|
|
|
nwDecIVProtoIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVProtoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of DECnet
|
|
Phase IV distance-vector-based routing protocol packets on the router
|
|
port for which the entry exists."
|
|
INDEX { nwDecIVProtoIfCtrIfIndex }
|
|
::= { nwDecIVProtoIfCtrTable 1 }
|
|
|
|
NwDecIVProtoIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVProtoIfCtrIfIndex INTEGER,
|
|
nwDecIVProtoIfCtrAdminStatus INTEGER,
|
|
nwDecIVProtoIfCtrReset INTEGER,
|
|
nwDecIVProtoIfCtrOperationalTime TimeTicks,
|
|
nwDecIVProtoIfCtrInPkts Counter,
|
|
nwDecIVProtoIfCtrOutPkts Counter,
|
|
nwDecIVProtoIfCtrFilteredPkts Counter,
|
|
nwDecIVProtoIfCtrDiscardPkts Counter,
|
|
nwDecIVProtoIfCtrInBytes Counter,
|
|
nwDecIVProtoIfCtrOutBytes Counter,
|
|
nwDecIVProtoIfCtrFilteredBytes Counter,
|
|
nwDecIVProtoIfCtrDiscardBytes Counter
|
|
}
|
|
nwDecIVProtoIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 1 }
|
|
|
|
nwDecIVProtoIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port DECnet Phase IV
|
|
distance-vectorbased routing protocol packet and byte counters on
|
|
the router port for which the entry exists. Enabled (3) causes these
|
|
counters to become active. Disabled (2) causes these counters to
|
|
become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoIfCtrEntry 2 }
|
|
|
|
nwDecIVProtoIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port DECnet Phase IV distance-vector-based routing
|
|
protocol packet and byte counters on the router port for which the
|
|
entry exists. Reset (2) resets the counters to 0.
|
|
nwDecIVProtoIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVProtoIfCtrEntry 3 }
|
|
|
|
nwDecIVProtoIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoIfCtrAdminStatus has been in the current state."
|
|
::= { nwDecIVProtoIfCtrEntry 4 }
|
|
|
|
nwDecIVProtoIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been received, during
|
|
nwDecIVProtoIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 5 }
|
|
|
|
nwDecIVProtoIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been transmitted, during
|
|
nwDecIVProtoIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 6 }
|
|
|
|
nwDecIVProtoIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been administratively filtered,
|
|
during nwDecIVProtoIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 7 }
|
|
|
|
nwDecIVProtoIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been discarded, during
|
|
nwDecIVProtoIfCtrOperationalTime, that were received on the router
|
|
port for which the entry exist."
|
|
::= { nwDecIVProtoIfCtrEntry 8 }
|
|
nwDecIVProtoIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector-based routing protocol packets that have been
|
|
received, during nwDecIVProtoIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 9 }
|
|
|
|
nwDecIVProtoIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector-based routing protocol packets that have been
|
|
transmitted, during nwDecIVProtoIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 10 }
|
|
nwDecIVProtoIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector-based routing protocol packets that have been
|
|
administratively filtered, during nwDecIVProtoIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 11 }
|
|
|
|
nwDecIVProtoIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that have
|
|
been discarded, during nwDecIVProtoIfCtrOperationalTime, that were
|
|
received on the router port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 12 }
|
|
|
|
|
|
-- DECnet Phase IV Forward Information Base (FIB) Table
|
|
-- This table contains the managed objects for the forwarding table of the
|
|
-- DECnet Phase IV router. This table is built from entries in the DECnet
|
|
-- Phase IV routing table(s) and reflects the routes that are considered
|
|
-- the best routes to forward on.
|
|
nwDecIVFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each route being used to forward
|
|
DECnet data packets.."
|
|
::= { nwDecIVFib 1 }
|
|
|
|
nwDecIVFibEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry in the table describes a route to a particular DECnet
|
|
destination network and node."
|
|
INDEX { nwDecIVFibNodeId }
|
|
::= { nwDecIVFibTable 1 }
|
|
|
|
NwDecIVFibEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVFibNodeId DecIVAddress,
|
|
nwDecIVFibNextHopNodeId DecIVAddress,
|
|
nwDecIVFibNextHopIf INTEGER,
|
|
nwDecIVFibRouteType INTEGER
|
|
}
|
|
|
|
nwDecIVFibNodeId OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the DECnet Address of the destination node of the route
|
|
for which the entry exists."
|
|
::= { nwDecIVFibEntry 1 }
|
|
|
|
nwDecIVFibNextHopNodeId OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the DECnet Address of the next hop router for the route
|
|
for which the entry exists."
|
|
::= { nwDecIVFibEntry 2 }
|
|
|
|
nwDecIVFibNextHopIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port through which the route exists."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVFibEntry 3 }
|
|
|
|
nwDecIVFibRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
invalid(2), -- not a valid route
|
|
direct(3), -- destination is on a direct conn. seg.
|
|
remote(4) -- destination is avail. through the next hop router.
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the status of the route. A value of 3 indicates that the
|
|
destination is on the network segment that is directly connected to
|
|
the router port identified by nwDecIVFibNextHopIf. A value of 4
|
|
indicates that the destination is on an indirectly connected network
|
|
segment, which is reachable through the next hop router indicated by
|
|
the value of nwDecIVFibNextHopNodeId. A value of 2 indicates that the
|
|
route is invalid."
|
|
DEFVAL { direct }
|
|
::= { nwDecIVFibEntry 4 }
|
|
|
|
|
|
-- DECnet Phase IV Access Control List Table
|
|
-- This table contains the managed objects for the Access Control Lists
|
|
-- within the DECnet Phase IV Router. Access Control Lists allow configuration of
|
|
-- restricted access to networks and protocols reachable thru the DecIV
|
|
-- Router device. Access Control Lists can be defined with these
|
|
nwDecIVAclValidEntries OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of valid entries that exist in the access
|
|
control list table, nwDecIVAclTable."
|
|
::= { nwDecIVAccessControl 1 }
|
|
|
|
nwDecIVAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the access control list information for DECnet
|
|
traffic. This table contains entries each of which specifies whether
|
|
packet forwarding between a particular source destination pair is
|
|
permitted or denied. Each entry is part of a particular access
|
|
control list. Each list is identified by a unique Access Control ID.
|
|
Each list may contain multiple entries ordered by sequence number.
|
|
When an Access Control List is searched, it is searched in sequence
|
|
number order and the first match found ends the search. If no match
|
|
is found, access defaults to permitted."
|
|
::= { nwDecIVAccessControl 2 }
|
|
|
|
nwDecIVAclEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains DECnet source/destination access information."
|
|
INDEX { nwDecIVAclIdentifier, nwDecIVAclSequence }
|
|
::= { nwDecIVAclTable 1 }
|
|
|
|
NwDecIVAclEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVAclIdentifier INTEGER,
|
|
nwDecIVAclSequence INTEGER,
|
|
nwDecIVAclPermission INTEGER,
|
|
nwDecIVAclMatches Counter,
|
|
nwDecIVAclDestAddress DecIVAddress,
|
|
nwDecIVAclSrcAddress DecIVAddress
|
|
|
|
}
|
|
|
|
nwDecIVAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the DECnet access control
|
|
list table. This value identifies each access control list by a
|
|
unique identifier, a number arbitrarily assigned by the user. All
|
|
entries that have the same value for nwDecIVAclIdentifier belong to
|
|
the same access control list."
|
|
::= { nwDecIVAclEntry 1 }
|
|
|
|
nwDecIVAclSequence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the secondary (minor) index into the DECnet access control
|
|
list table. This number corresponds to a sequence number used to
|
|
order multiple entries within the same access control list."
|
|
::= { nwDecIVAclEntry 2 }
|
|
|
|
nwDecIVAclPermission OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permit(3),
|
|
deny(4),
|
|
permit-bidirectional(5),
|
|
deny-bidirectional(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether access is allowed or denied between the source
|
|
and destination address pair. Note that source and destination are
|
|
interchangeable when bi-directional control is selected. To remove
|
|
an existing entry set nwDecIVAclPermission to invalid (2). Invalid
|
|
entries disappear after reboot."
|
|
DEFVAL { permit }
|
|
::= { nwDecIVAclEntry 3 }
|
|
|
|
nwDecIVAclMatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of matches on this entry that have resulted
|
|
in the permit/deny access restriction being applied as part of the
|
|
forwarding process."
|
|
::= { nwDecIVAclEntry 4 }
|
|
|
|
nwDecIVAclDestAddress OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the destination DECnet Address used to compare for
|
|
matches on the access control list. Either the Area ID or Node ID
|
|
of this address may be set to 0, a wildcard value which matches all
|
|
areas or all nodes."
|
|
::= { nwDecIVAclEntry 5 }
|
|
|
|
nwDecIVAclSrcAddress OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the source DECnet Address used to compare for matches on
|
|
the access control list. Either the Area ID or Node ID of this
|
|
address may be set to a wildcard value which matches all areas or
|
|
all nodes."
|
|
::= { nwDecIVAclEntry 6 }
|
|
|
|
--
|
|
-- DecIV Hosts-to-Media Table
|
|
|
|
-- This table provides a mapping between DecIV Network Protocol
|
|
-- addresses and their corresponding circuit identifiers (if
|
|
-- applicable), port numbers, and framing.
|
|
|
|
|
|
nwDecIVHostMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DecIV Address translation table used for mapping
|
|
a DecIV address to a circuit identifier (if applicable),
|
|
corresponding port number, and framing type."
|
|
::= { nwDecIVHostsToMedia 1 }
|
|
|
|
nwDecIVHostMapEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains one DecIVAddress to circuit
|
|
equivalence. Also provided is the framing required to
|
|
converse with this host, and the corresponding logical
|
|
port number."
|
|
INDEX { nwDecIVHostMapIfIndex, nwDecIVHostMapDecIVAddr }
|
|
::= { nwDecIVHostMapTable 1 }
|
|
|
|
NwDecIVHostMapEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVHostMapIfIndex INTEGER,
|
|
nwDecIVHostMapDecIVAddr DecIVAddress,
|
|
nwDecIVHostMapType INTEGER,
|
|
nwDecIVHostMapCircuitID INTEGER,
|
|
nwDecIVHostMapFraming INTEGER,
|
|
nwDecIVHostMapPortNumber INTEGER
|
|
}
|
|
|
|
nwDecIVHostMapIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the DecIV HostMap
|
|
table. This number corresponds to the index into the MIB-2
|
|
Interfaces Group which describes the DecIV router port for which
|
|
the entry exists."
|
|
::= { nwDecIVHostMapEntry 1 }
|
|
|
|
nwDecIVHostMapDecIVAddr OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DecIVAddress of the host on the corresponding interface
|
|
and circuit (if applicable)."
|
|
::= { nwDecIVHostMapEntry 2 }
|
|
|
|
nwDecIVHostMapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
dynamic(3),
|
|
static(4),
|
|
inactive(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry in the
|
|
nwDecIVHostMapTable. That is, it effectively dissasociates
|
|
the circuitand/or interface identified with said entry from the
|
|
mapping identified with said entry. It is an implementation-
|
|
specific matter as to whether the agent removes an invalidated
|
|
entry from the table. Accordingly, management stations must be
|
|
prepared to receive tabular information from agents that
|
|
corresponds to entries not currently in use. Proper inter-
|
|
pretation of such entries requires examination of the relevant
|
|
wDecIVHostMapType object."
|
|
|
|
::= { nwDecIVHostMapEntry 3 }
|
|
|
|
nwDecIVHostMapCircuitID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The identifier for the virtual circuit present on the
|
|
interface. On an interface configured for Frame Relay,
|
|
this number is the DLCI for the DecIV Address at the end of
|
|
the circuit. For non-WAN interfaces, the value of this
|
|
object is zero."
|
|
::= { nwDecIVHostMapEntry 4 }
|
|
|
|
nwDecIVHostMapFraming OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- ethernet, fddi, and token ring
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special media, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type required to converse with the
|
|
host for which this entry exists."
|
|
::= { nwDecIVHostMapEntry 5 }
|
|
|
|
nwDecIVHostMapPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value for the logical port number. It's value
|
|
ranges between 1 and a maximum value which is dependent on both
|
|
the number of configured interfaces in the system and the number
|
|
of circuits present on those interfaces which are of WAN type."
|
|
::= { nwDecIVHostMapEntry 6 }
|
|
|
|
|
|
-- DECnet Event Group
|
|
|
|
nwDecIVEventAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1) ,
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of DECnet event logging. Enabled (3)
|
|
causes the event log to become active. Disabled (2) causes the event
|
|
log to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVEventLogConfig 1 }
|
|
|
|
nwDecIVEventMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the maximum number of entries allowed in the event log table.
|
|
When the number of entries reaches the value of nwDecIVEventMaxEntries,
|
|
the first (oldest) entry is deleted to allow a new entry to be added."
|
|
DEFVAL { 100 }
|
|
::= { nwDecIVEventLogConfig 2 }
|
|
|
|
nwDecIVEventTraceAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabled (3) allows logging of all event types on all router ports
|
|
for all protocols and components. Disabled (2) causes the filter
|
|
table to specify which events to log."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVEventLogConfig 3 }
|
|
|
|
|
|
-- Event Log Filter Table
|
|
-- The Event Log Filter Table contains the managed objects used to set-up
|
|
-- and configure log entries.
|
|
|
|
nwDecIVEventFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains and entry for each event filter configured for
|
|
DECnet Phase IV Routing Services events."
|
|
::= { nwDecIVEventLogFilterTable 1 }
|
|
|
|
nwDecIVEventFilterEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes an event filter which defines a particular type
|
|
of event to be logged to the event log. The value of
|
|
nwDecIVEventFltrProtocol indicates the value used either in the
|
|
nwRtgProtocolTable or the nwComponentTable in the Cabletron Routing
|
|
Services MIB, which identifies the protocol or component to which the
|
|
entry applies."
|
|
INDEX { nwDecIVEventFltrProtocol, nwDecIVEventFltrIfNum }
|
|
::= { nwDecIVEventFilterTable 1 }
|
|
|
|
NwDecIVEventFilterEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVEventFltrProtocol INTEGER,
|
|
nwDecIVEventFltrIfNum INTEGER,
|
|
nwDecIVEventFltrControl INTEGER,
|
|
nwDecIVEventFltrType INTEGER,
|
|
nwDecIVEventFltrSeverity INTEGER,
|
|
nwDecIVEventFltrAction INTEGER
|
|
}
|
|
|
|
nwDecIVEventFltrProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services MIB
|
|
nwRtgProtocolInstance or nwComponentRtgInstance which identifies the
|
|
protocol involved in the event for which the event filter exists."
|
|
::= { nwDecIVEventFilterEntry 1 }
|
|
|
|
nwDecIVEventFltrIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the router port involved in the event for which the event
|
|
filter exists."
|
|
::= { nwDecIVEventFilterEntry 2 }
|
|
|
|
nwDecIVEventFltrControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2),
|
|
add(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this value to 3 to add the entry to the event filter table. Set
|
|
this value to 2 to remove the entry from the event filter table."
|
|
DEFVAL { add }
|
|
::= { nwDecIVEventFilterEntry 3 }
|
|
|
|
nwDecIVEventFltrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
diags(32),
|
|
error(64)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This 6 bit mask specifies the types of events to be logged. By
|
|
default all 6 bits are set to 1, indicating that all types of events
|
|
are to be logged. Setting any bit to 0 removes an event type from
|
|
this field and prevents that type of event from being logged. Setting
|
|
any bit to 1 adds an event type to this field and enables that type
|
|
of event to be logged."
|
|
::= { nwDecIVEventFilterEntry 4 }
|
|
|
|
nwDecIVEventFltrSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the level of severity an event must meet in order to be
|
|
logged. Controls the amount of event logging by ignoring events of a
|
|
lower priority than specified by this filter value. `Highmed' ignores
|
|
only events of the lowest severity. `Highlow' logs all events highest
|
|
priority through lowest. `Highest' severity causes all events except
|
|
those of the highest severity to be ignored. `Highmed' severity is the
|
|
default setting which causes only events of the lowest severity to be
|
|
ignored. `Highlow' severity logs all events, regardless of severity."
|
|
DEFVAL { highest }
|
|
::= { nwDecIVEventFilterEntry 5 }
|
|
|
|
nwDecIVEventFltrAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
log(1),
|
|
trap(2),
|
|
log-trap(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies how the events are to be logged. Logging to the `log'
|
|
stores the events in the event log table (nwDecIVEventLogTable).
|
|
Logging to'trap' sends events out through the trap mechanism."
|
|
DEFVAL { log }
|
|
::= { nwDecIVEventFilterEntry 6 }
|
|
|
|
-- Event Log Table
|
|
-- The Event Log Table contains the logged events.
|
|
|
|
nwDecIVEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event that has been
|
|
logged."
|
|
::= { nwDecIVEventLogTable 1 }
|
|
|
|
nwDecIVEventEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the information about an event that has
|
|
been logged to the event table."
|
|
INDEX { nwDecIVEventNumber }
|
|
::= { nwDecIVEventTable 1 }
|
|
|
|
NwDecIVEventEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVEventNumber INTEGER,
|
|
nwDecIVEventTime TimeTicks,
|
|
nwDecIVEventType INTEGER,
|
|
nwDecIVEventSeverity INTEGER,
|
|
nwDecIVEventProtocol INTEGER,
|
|
nwDecIVEventIfNum INTEGER,
|
|
nwDecIVEventTextString OCTET STRING
|
|
}
|
|
|
|
nwDecIVEventNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ordinal value assigned to the event for which the log entry
|
|
exists. nwDecIVEventNumber is assigned so that each event in the
|
|
event log can be uniquely identified by the value of
|
|
nwDecIVEventNumber."
|
|
::= { nwDecIVEventEntry 1 }
|
|
|
|
nwDecIVEventTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the time at which the event was logged to the event
|
|
log."
|
|
::= { nwDecIVEventEntry 2 }
|
|
|
|
nwDecIVEventType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
error(32)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type of event that was logged."
|
|
::= { nwDecIVEventEntry 3 }
|
|
|
|
nwDecIVEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the severity that was assigned to the event."
|
|
::= { nwDecIVEventEntry 4 }
|
|
|
|
nwDecIVEventProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services MIB
|
|
nwRtgProtocolInstance or nwComponentInstance which identifies the
|
|
protocol or component that was involved in the event."
|
|
::= { nwDecIVEventEntry 5 }
|
|
|
|
nwDecIVEventIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the router port that was involved in the event."
|
|
::= { nwDecIVEventEntry 6 }
|
|
|
|
nwDecIVEventTextString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the actual text string that was logged."
|
|
::= { nwDecIVEventEntry 7 }
|
|
|
|
END
|