mibs/MIBS/enterasys/CTRON-PORTMAP-MIB
2023-12-05 12:25:34 +01:00

148 lines
5.1 KiB
Plaintext

CTRON-PORTMAP-MIB DEFINITIONS ::= BEGIN
-- CTRON-PORTMAP-MIB The Cabletron Repeater MIB for Port Mapping.
-- ctron-portmap-mib.txt
-- Revision: 1.00.01
-- Part Number:
-- Date: May 22, 1998
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for part
-- of the naming tree below:
--
-- cabletron { enterprises 52 }
--
-- This module will be extended, as additional sub-sections
-- of this naming tree are defined.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 98 Cabletron Systems
IMPORTS
OBJECT-TYPE FROM RFC-1212
ctPortMap FROM CTRON-MIB-NAMES;
portMap OBJECT IDENTIFIER ::= { ctPortMap 1 }
portMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table identifies the repeater which the port
belongs to."
::= { portMap 1 }
portMapEntry OBJECT-TYPE
SYNTAX PortMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Provides basic mapping and capability for a specific port."
INDEX { portMapIndex }
::= { portMapTable 1 }
PortMapEntry ::= SEQUENCE {
portMapIndex
INTEGER,
portMapRepeater
INTEGER,
portMapCapability
INTEGER,
portMapOperationalMode
INTEGER,
portMapLastSeenSrcAddr
OCTET STRING
}
portMapIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns an index to a port for which the information
in this table pertains."
::= { portMapEntry 1 }
portMapRepeater OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Gives the repeater number that this port is connected to."
::= { portMapEntry 2 }
portMapCapability OBJECT-TYPE
SYNTAX INTEGER (0..1023)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates the technology ability of the local hardware.
The value of this object is the logical OR of all supported
technologies, where each technology is given the values below:
other(1) Undefined, or ability not known
Auto-Negotiation(2) Auto-Negotiation
10BASE-T(4) 10BASE-T
100BASE-TX(8) 100BASE-TX
1000BASE(16) 1000BASE
For example, a port that has the capability of supporting
10BASE-T and 100BASE-TX would have a value of 12 (4 + 8)."
::= { portMapEntry 3 }
portMapOperationalMode OBJECT-TYPE
SYNTAX INTEGER (0..1023)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This indicates the current operational mode of this port.
This value is a logical OR of the current operational mode,
where each technology is given the values below:
other(1) Undefined, or ability not known
Auto-Negotiation(2) Auto-Negotiation
10BASE-T(4) 10BASE-T
100BASE-TX(8) 100BASE-TX
1000BASE(16) 1000BASE
For example, a port that has auto-negotiated to a speed of
100BASE-TX would have a value of 10 (2 + 8)."
::= { portMapEntry 4 }
portMapLastSeenSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns last source address seen by this repeater port."
::= { portMapEntry 5}
END