mibs/MIBS/enterasys/CTRON-ROUTERS-MIB
2023-12-05 12:25:34 +01:00

1223 lines
48 KiB
Plaintext

CTRON-ROUTERS-MIB DEFINITIONS ::= BEGIN
-- ctron-routers-mib.txt
-- Revision: 1.01.00
-- Part Number: 2170988
-- Date: June 5, 1995
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific Routing Services MIB. This MIB contains
-- objects which provide a high-level view of the routed and routing
-- protocols for the Cabletron Router. Essentially, this MIB
-- allows for the dynamic "discovery" of routing services within
-- Cabletron devices.
-- This module will be extended, as needed.
--
-- Cabletron Systems reserves the right to make changes in
-- specifications and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 92 Cabletron Systems
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
nwRouter, nwRtrMibs, nwRtrHighLevelView, nwRtrProtoSuites
FROM ROUTER-OIDS
Counter, TimeTicks
FROM RFC1155-SMI;
nwRtrMibRevision OBJECT IDENTIFIER ::= { nwRtrMibs 1 }
nwRtrStandardMibs OBJECT IDENTIFIER ::= { nwRtrMibs 2 }
nwRtrApplicationView OBJECT IDENTIFIER ::= { nwRtrHighLevelView 1 }
nwRtrRoutingView OBJECT IDENTIFIER ::= { nwRtrHighLevelView 2 }
nwRtrComponentView OBJECT IDENTIFIER ::= { nwRtrHighLevelView 3 }
nwRtrCountersView OBJECT IDENTIFIER ::= { nwRtrHighLevelView 4 }
nwRtrApplicationSystem OBJECT IDENTIFIER ::= { nwRtrApplicationView 1 }
nwRtrApplicationInterfaces OBJECT IDENTIFIER ::= { nwRtrApplicationView 2 }
nwRtrRoutingSystem OBJECT IDENTIFIER ::= { nwRtrRoutingView 1 }
nwRtrRoutingInterfaces OBJECT IDENTIFIER ::= { nwRtrRoutingView 2 }
nwRtrComponentSystem OBJECT IDENTIFIER ::= { nwRtrComponentView 1 }
nwRtrComponentInterfaces OBJECT IDENTIFIER ::= { nwRtrComponentView 2 }
nwRtrCountersControl OBJECT IDENTIFIER ::= { nwRtrCountersView 1 }
nwRtrInterfaceCounters OBJECT IDENTIFIER ::= { nwRtrCountersView 2 }
-- The Router MIB Revision Group.
-- This group contains information about the revision level of this
-- MIB within the device. It allows verification of the released
-- version without having to read other objects.
nwRtrMibRevText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the Cabletron Routing
services High Level MIB in textual format. Read the value of
this object to determine the revision of the CTRouter MIB
operating on the routing services enabled device."
::= { nwRtrMibRevision 1 }
-- The Router Standard MIB Table.
-- This table contains a list of all the Standard MIBs instanciated
-- in the Cabletron Routing Services.
nwRtrStdMibTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwRtrStdMibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table includes entries for all of the Standard MIBs
present within the routing services enabled device. Read the
entries in this table to determine which standard MIBs are
present. An entry exists for each standard MIB that is
present. The index into this table is an arbitrary ordinal
value."
::= { nwRtrStandardMibs 1 }
nwRtrStdMibEntry OBJECT-TYPE
SYNTAX NwRtrStdMibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry identifies the starting OID for the standard MIB for which
the entry exists."
INDEX { nwRtrStdMibIndex }
::= { nwRtrStdMibTable 1 }
NwRtrStdMibEntry ::=
SEQUENCE {
nwRtrStdMibIndex INTEGER,
nwRtrStdMibIdentifier OBJECT IDENTIFIER
}
nwRtrStdMibIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the index into the Standard MIB index within the
Standard MIB Table."
::= { nwRtrStdMibEntry 1 }
nwRtrStdMibIdentifier OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OID that identifies the starting point of the standard MIB
for which the entry exists."
::= { nwRtrStdMibEntry 2 }
-- The Router High-Level View Group.
-- This group provides a high-level Configuration Change Flag to indicate
-- whether further device interrogation is required and a version number
-- indicating the version of Cabletron Routing services. This group also
-- provides tables to discover the routed protocols, routing protocols and
-- components which are dynamically instanciated at device power up.
-- These tables allow discovery of routing components on both the system and
-- the interface, or router port, level.
nwRtrAdminChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of times, configuration changes have
been made to the routing services recorded by this MIB. Each
time a change is made this counter is increments by 1. Read
the value of this entry to determine if any values in this
MIB have changed."
::= { nwRtrApplicationSystem 1 }
-- The Router System Table.
-- This table shows all of the Routing Protocols that make up the routing
-- services, and their respective configurations in the device. A high-level
-- view can be achieved without having to access each of the individual
-- router mibs.
nwRouterSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwRouterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each routing service present
within the routing services enabled device."
::= { nwRtrApplicationSystem 2 }
nwRouterEntry OBJECT-TYPE
SYNTAX NwRouterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes the routing service for which the entry
exists."
INDEX { nwRouterInstance }
::= { nwRouterSystemTable 1 }
NwRouterEntry ::=
SEQUENCE {
nwRouterInstance INTEGER,
nwRouterAdminStatus INTEGER,
nwRouterOperStatus INTEGER,
nwRouterOperationalTime TimeTicks,
nwRouterEntMibGroup OBJECT IDENTIFIER,
nwRouterName DisplayString,
nwRouterVersion DisplayString,
nwRouterIdentifier OBJECT IDENTIFIER
}
nwRouterInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ordinal value assigned to the routing service for which
the entry exists."
::= { nwRouterEntry 1 }
nwRouterAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3) -- running
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current administrative state of the routing
service for which the entry exists."
::= { nwRouterEntry 2 }
nwRouterOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the
routing services for which the entry exists."
::= { nwRouterEntry 3 }
nwRouterOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how long this Routing Service has been in its
current administrative state for which the entry exists."
::= { nwRouterEntry 4 }
nwRouterEntMibGroup OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the starting OID for the Cabletron Enterprise MIB
that implements the managed objects for the routing service for
which the entry exists."
::= { nwRouterEntry 5 }
nwRouterName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the name of the routing service in textual format
for which the entry exists."
::= { nwRouterEntry 6 }
nwRouterVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the routing service,
in textual format for which the entry exists."
::= { nwRouterEntry 7 }
nwRouterIdentifier OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the OID in the Cabletron ctNetwork naming tree
MIB used to uniquely identify the routing service for which the
entry exists. Read the value indicated to obtain the name of the
routing service for which this entry exists."
::= { nwRouterEntry 8 }
--
-- The Cabletron Routing Services version number is specified by CM.
--
nwRtrVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of Cabletron
routing services in textual format."
::= { nwRtrApplicationSystem 3 }
-- The Router Interface Table.
-- This table shows all of the Routing Protocol suites that make up the
-- routing services that are on each router port. This high-level view
-- can be acheived without having to access each of the individual router
-- MIB's.
nwRouterIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwRouterIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each routing service running
on each router port. Essentially, this table gives a
high-level view of the configuration and administrative state
of each of the routing service running on each router port."
::= { nwRtrApplicationInterfaces 1 }
nwRouterIfEntry OBJECT-TYPE
SYNTAX NwRouterIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes the routing service operating on the
router port for which the entry exists."
INDEX { nwRouterIfIndex, nwRouterIfInstance }
::= { nwRouterIfTable 1 }
NwRouterIfEntry ::=
SEQUENCE {
nwRouterIfIndex INTEGER,
nwRouterIfInstance INTEGER,
nwRouterIfAdminStatus INTEGER,
nwRouterIfOperStatus INTEGER,
nwRouterIfOperationalTime TimeTicks,
nwRouterIfName DisplayString
}
nwRouterIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value in MIB 2 ifIndex, which identifies the
router port for which the entry exists."
::= { nwRouterIfEntry 1 }
nwRouterIfInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of nwRouterInstance as established in
nwRouterSystemTable. Essentially, indicating which routing
service is running on the router port for which the entry
exists. All router ports running the same routing service
will have the same value for nwRouterIfInstance."
::= { nwRouterIfEntry 2 }
nwRouterIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3) -- running
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current administrative state of the routing
service on the router port for which the entry exists."
::= { nwRouterIfEntry 3 }
nwRouterIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the routing
service on the router port for which the entry exists."
::= { nwRouterIfEntry 4 }
nwRouterIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how long the routing service has been in its
current administrative state on the router port for which
the entry exists."
::= { nwRouterIfEntry 5 }
nwRouterIfName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the name of the routing service that is operating on
the router port for which the entry exists."
::= { nwRouterIfEntry 6 }
-- The Router Routing Protocols Table.
-- This table shows all of the Routing Protocols that make up the routing
-- services. Essentially,this table gives a high-level view of the
-- configuration and state of each of the Routing protocols running within the
-- Routing Services.
nwRtgProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwRtgProtocolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each routing protocol
supported by the routing service running on the enabled
device. Each entry is indexed by the parent routing service,
nwRtgProtocolRtrInstance. All routing protocols that are
supported by the same routing service will have the same value
for nwRtgProtocolRtrInstance. The table is also indexed by an
ordinal value, nwRtgProtocolInstance, which is assigned to
each routing protocol as it is instantiated. Together, these
two instances show the hierarchical relationship between each
routing service and its supported routing protocols."
::= { nwRtrRoutingSystem 1 }
nwRtgProtocolEntry OBJECT-TYPE
SYNTAX NwRtgProtocolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry identifies a routing protocol and the routing
service that it is a part of."
INDEX { nwRtgProtocolRtrInstance, nwRtgProtocolInstance }
::= { nwRtgProtocolTable 1 }
NwRtgProtocolEntry ::=
SEQUENCE {
nwRtgProtocolRtrInstance INTEGER,
nwRtgProtocolInstance INTEGER,
nwRtgProtocolAdminStatus INTEGER,
nwRtgProtocolOperStatus INTEGER,
nwRtgProtocolOperationalTime TimeTicks,
nwRtgProtocolEntMibGroup OBJECT IDENTIFIER,
nwRtgProtocolName DisplayString,
nwRtgProtocolVersion DisplayString,
nwRtgProtocolIdentifier OBJECT IDENTIFIER
}
nwRtgProtocolRtrInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal value indicates the value of nwRouterInstance
as established in the nwRouterSystemTable. This essentially
is the key that maps all routing protocols supported by the
same routing service to the same value for
nwRtgProtocolRtrInstance."
::= { nwRtgProtocolEntry 1 }
nwRtgProtocolInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ordinal value assigned to the routing protocol for which
the entry exists, which is used to uniquely identify each routing
protocol."
::= { nwRtgProtocolEntry 2 }
nwRtgProtocolAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3) -- running
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current administrative state of the routing
protocol for which the entry exists."
::= { nwRtgProtocolEntry 3 }
nwRtgProtocolOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the routing
protocol for which the entry exists."
::= { nwRtgProtocolEntry 4 }
nwRtgProtocolOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how long this Routing protocol has been in its
current state for which the entry exists."
::= { nwRtgProtocolEntry 5 }
nwRtgProtocolEntMibGroup OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the starting OID of the subtree or branch of
the Cabletron Enterprise MIB that implements the
managed objects for the routing service for which the entry
exists."
::= { nwRtgProtocolEntry 6 }
nwRtgProtocolName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Names the routing protocol in textual format for which the
entry exists."
::= { nwRtgProtocolEntry 7 }
nwRtgProtocolVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the routing protocol,
in textual format, for which the entry exists."
::= { nwRtgProtocolEntry 8 }
nwRtgProtocolIdentifier OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the OID from the Cabletron ctNetwork naming tree
used to uniquely identify the routing protocol for which the
entry exists."
::= { nwRtgProtocolEntry 9 }
-- The Interfaces Table
-- This shows Routing Services Routing Protocol information on a per
-- interface, or router port basis.
nwRtgProtocolIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwRtgProtocolIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each routing protocol
running on each router port of the routing
services enabled device."
::= { nwRtrRoutingInterfaces 1 }
nwRtgProtocolIfEntry OBJECT-TYPE
SYNTAX NwRtgProtocolIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes a routing protocols that is running on
the router port for which the entry exists."
INDEX { nwRtgProtocolIfIndex, nwRtgProtocolIfRtrInstance,
nwRtgProtocolIfInstance }
::= { nwRtgProtocolIfTable 1 }
NwRtgProtocolIfEntry ::=
SEQUENCE {
nwRtgProtocolIfIndex INTEGER,
nwRtgProtocolIfRtrInstance INTEGER,
nwRtgProtocolIfInstance INTEGER,
nwRtgProtocolIfAdminStatus INTEGER,
nwRtgProtocolIfOperStatus INTEGER,
nwRtgProtocolIfOperationalTime TimeTicks,
nwRtgProtocolIfName DisplayString
}
nwRtgProtocolIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal value identifies the MIB2 ifIndex which
identifies the router port for which the entry exists.
All entries for the same router port will have the same
value in nwRtgProtocolIfIndex."
::= { nwRtgProtocolIfEntry 1 }
nwRtgProtocolIfRtrInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal value indicates the value of nwRouterInstance
as established in nwRouterSystemTable, running on the router
port for which the entry exists. All router ports running
the same routing services will have the same value for
nwRtgProtocolIfRtrInstance."
::= { nwRtgProtocolIfEntry 2 }
nwRtgProtocolIfInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal value indicates the value of
nwRtgProtocolInstance as established in nwRtgProtocolTable,
supported by the routing service, running on the router port
for which the entry exists. All router ports running the same
routing protocol will have the same value for
nwRtgProtocolIfInstance."
::= { nwRtgProtocolIfEntry 3 }
nwRtgProtocolIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3) -- running
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current administrative state of the routing
protocol on the router port for which the entry exists."
::= { nwRtgProtocolIfEntry 4 }
nwRtgProtocolIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the routing
protocol on this router port for which the entry exists."
::= { nwRtgProtocolIfEntry 5 }
nwRtgProtocolIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows how long this Router protocol has been in its
current state on this router port for which the entry
exists."
::= { nwRtgProtocolIfEntry 6 }
nwRtgProtocolIfName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the routing protocol, in textual format,
running on the router port for which the entry exists."
::= { nwRtgProtocolIfEntry 7 }
-- The Router Component Table.
-- This table shows all of the components that make up the Routing
-- Services. Essentially,this table gives a high-level view of the
-- configuration and state of each of the components running within the
-- routing services enabled device. This high-level view can be acheived
-- without having to load each of the individual router MIB's.
nwComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwComponentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each of the component
protocols that make-up a particular routing service.
Essentially, this table gives a high-level view of the
configuration and state of each of the component protocol
running within each routing service."
::= { nwRtrComponentSystem 1 }
nwComponentEntry OBJECT-TYPE
SYNTAX NwComponentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes a component protocol."
INDEX { nwComponentRtrInstance, nwComponentInstance }
::= { nwComponentTable 1 }
NwComponentEntry ::=
SEQUENCE {
nwComponentRtrInstance INTEGER,
nwComponentInstance INTEGER,
nwComponentAdminStatus INTEGER,
nwComponentOperStatus INTEGER,
nwComponentOperationalTime TimeTicks,
nwComponentEntMibGroup OBJECT IDENTIFIER,
nwComponentName DisplayString,
nwComponentVersion DisplayString,
nwComponentIdentifier OBJECT IDENTIFIER
}
nwComponentRtrInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal value indicates the value of nwRouterInstance
as established in nwRouterSystemTable for which the entry
exists. This essentially is the key that maps all components
of the same routing service to the same value for
nwComponentRtrInstance."
::= { nwComponentEntry 1 }
nwComponentInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ordinal value assigned to each component for which the
entry exists.."
::= { nwComponentEntry 2 }
nwComponentAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3) -- running
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current administrative state of the component
for which the entry exists."
::= { nwComponentEntry 3 }
nwComponentOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the routing
component for which the entry exists."
::= { nwComponentEntry 4 }
nwComponentOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how long this Router Component, for which the entry
exists, has been in its current administrative state."
::= { nwComponentEntry 5 }
nwComponentEntMibGroup OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the Cabletron Enterprise MIB that implements the
managed objects for the routing service for which the entry
exists. Essentially, this is a pointer to the OID of the
routing service's enterprise MIB. For example, IPX is a
routing service that has its own enterprise MIB, which is
identified by the value of nwComponentEntMibGroup."
::= { nwComponentEntry 6 }
nwComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Names the component in textual format for which the entry
exists."
::= { nwComponentEntry 7 }
nwComponentVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the component in
textual format for which the entry exists."
::= { nwComponentEntry 8 }
nwComponentIdentifier OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OID from the Cabletron ctNetwork naming tree MIB used to
uniquely identify the component for which the entry exists."
::= { nwComponentEntry 9 }
-- The Interface Table.
-- The Interface table shows Router Component information on a per
-- network interface, or router port, basis.
nwComponentIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwComponentIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each component that is part
of each routing service in each router port on the
routing services enabled device."
::= { nwRtrComponentInterfaces 1 }
nwComponentIfEntry OBJECT-TYPE
SYNTAX NwComponentIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes a component that is running on the
router port for which the entry exists."
INDEX { nwComponentIfIndex, nwComponentIfRtrInstance,
nwComponentIfInstance }
::= { nwComponentIfTable 1 }
NwComponentIfEntry ::=
SEQUENCE {
nwComponentIfIndex INTEGER,
nwComponentIfRtrInstance INTEGER,
nwComponentIfInstance INTEGER,
nwComponentIfAdminStatus INTEGER,
nwComponentIfOperStatus INTEGER,
nwComponentIfOperationalTime TimeTicks,
nwComponentIfName DisplayString
}
nwComponentIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this index identifies the MIB-2 ifIndex which
identifies the router port for which the entry exists."
::= { nwComponentIfEntry 1 }
nwComponentIfRtrInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal value indicates the value of nwRouterInstance
as established in the nwRouterSystemTable. This essentially
is the key that maps all components of the same routing
service to the same value for nwComponentIfRtrInstance."
::= { nwComponentIfEntry 2 }
nwComponentIfInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of nwComponentInstance as established in
nwComponentTable. It is used to uniquely order each component
within each routing service, on each router port for which the
entry exists."
::= { nwComponentIfEntry 3 }
nwComponentIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3) -- running
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current administrative status of the component
on the router port for which the entry exists."
::= { nwComponentIfEntry 4 }
nwComponentIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the
components on the router port for which the entry exists."
::= { nwComponentIfEntry 5 }
nwComponentIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how long the Router Component has been in its
administrative state for which the entry exists."
::= { nwComponentIfEntry 6 }
nwComponentIfName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component in textual format for which the
entry exists."
::= { nwComponentIfEntry 7 }
--
--
-- All Routed Protocol Forwarding Interfaces Counter Table
-- This table contains the objects that specify the packet and byte counters
-- on all configured router ports.
nwRtrIfFwdCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwRtrIfFwdCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the packet and byte counters for each
router port configured on this device."
::= { nwRtrInterfaceCounters 1 }
nwRtrIfFwdCtrEntry OBJECT-TYPE
SYNTAX NwRtrIfFwdCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Specifies the aggregate packet and byte counters for the
router port for which this entry exists."
INDEX { nwRtrIfFwdCtrIfIndex }
::= { nwRtrIfFwdCtrTable 1 }
NwRtrIfFwdCtrEntry ::=
SEQUENCE {
nwRtrIfFwdCtrIfIndex INTEGER,
nwRtrIfFwdCtrOperStatus INTEGER,
nwRtrIfFwdCtrInPkts Counter,
nwRtrIfFwdCtrOutPkts Counter,
nwRtrIfFwdCtrFwdPkts Counter,
nwRtrIfFwdCtrFilteredPkts Counter,
nwRtrIfFwdCtrDiscardPkts Counter,
nwRtrIfFwdCtrAddrErrPkts Counter,
nwRtrIfFwdCtrLenErrPkts Counter,
nwRtrIfFwdCtrHdrErrPkts Counter,
nwRtrIfFwdCtrInBytes Counter,
nwRtrIfFwdCtrOutBytes Counter,
nwRtrIfFwdCtrFwdBytes Counter,
nwRtrIfFwdCtrFilteredBytes Counter,
nwRtrIfFwdCtrDiscardBytes Counter,
nwRtrIfFwdCtrHostInPkts Counter,
nwRtrIfFwdCtrHostOutPkts Counter,
nwRtrIfFwdCtrHostDiscardPkts Counter,
nwRtrIfFwdCtrHostInBytes Counter,
nwRtrIfFwdCtrHostOutBytes Counter,
nwRtrIfFwdCtrHostDiscardBytes Counter
}
nwRtrIfFwdCtrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the router
port. When multiple routing services are running on the same router
port multiple entries exist for the same nwRouterIfIndex."
::= { nwRtrIfFwdCtrEntry 1 }
nwRtrIfFwdCtrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not counting
enabled(3) -- counting
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the routing
services on the router port. The value of nwRtrIfFwdCtrOperStatus
indicates whether counting is active for the routing services
on the routing port."
::= { nwRtrIfFwdCtrEntry 2 }
nwRtrIfFwdCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
received, during System Operational Time, on the
router port for which this entry exists."
::= { nwRtrIfFwdCtrEntry 3 }
nwRtrIfFwdCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
transmitted, during System Operational Time, on the
router port for which this entry exists"
::= { nwRtrIfFwdCtrEntry 4 }
nwRtrIfFwdCtrFwdPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
forwarded, during System Operational Time, on the
router port for which this entry exists"
::= { nwRtrIfFwdCtrEntry 5 }
nwRtrIfFwdCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
administratively filtered, during
System Operational Time, on the router port for
which this entry exists."
::= { nwRtrIfFwdCtrEntry 6 }
nwRtrIfFwdCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
discarded (dropped), during System Operational Time,
on the router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 7 }
nwRtrIfFwdCtrAddrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
discarded, because of Routed Protocol addressing errors in the
Routed Protocol header, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 8 }
nwRtrIfFwdCtrLenErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
discarded, because an invalid packet length was contained
in the Routed Protocol header, during System Operational Time, on
the router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 9 }
nwRtrIfFwdCtrHdrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
discarded, because of an invalid Routed Protocol header, during
System Operational Time, on the router port for
which the entry exists."
::= { nwRtrIfFwdCtrEntry 10 }
nwRtrIfFwdCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been received, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 11 }
nwRtrIfFwdCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been transmitted, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 12 }
nwRtrIfFwdCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been forwarded, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 13 }
nwRtrIfFwdCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been administratively filtered, during
System Operational Time, on the router port for
which the entry exists."
::= { nwRtrIfFwdCtrEntry 14 }
nwRtrIfFwdCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been discarded, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 15 }
nwRtrIfFwdCtrHostInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
delivered to the local host, during System Operational Time,
that were received on the router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 16 }
nwRtrIfFwdCtrHostOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
forwarded by the local host, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 17 }
nwRtrIfFwdCtrHostDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Routed Protocol packets that have been
discarded by the local host, during System Operational Time,
that were received on the router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 18 }
nwRtrIfFwdCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been received by the local host, during
System Operational Time, on the router port for which the entry
exists."
::= { nwRtrIfFwdCtrEntry 19 }
nwRtrIfFwdCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been forwarded by the local host, during
System Operational Time, on the router port for which the entry
exists."
::= { nwRtrIfFwdCtrEntry 20 }
nwRtrIfFwdCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Routed Protocol packets
that have been discarded by the local host, that were
received, during System Operational Time, on the
router port for which the entry exists."
::= { nwRtrIfFwdCtrEntry 21 }
END