mibs/MIBS/enterasys/CTRON-SFPS-DIAGSTATS-MIB
2023-12-05 12:25:34 +01:00

279 lines
8.1 KiB
Plaintext

CTRON-SFPS-DIAGSTATS-MIB DEFINITIONS ::= BEGIN
-- sfps-diagstats-mib.txt
-- Revision: 0.0.03
--
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
--
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific Fast Packet Switching Services API MIB.
--
-- This module will be extended, as required.
--
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright October 93 Cabletron Systems
--
IMPORTS
OBJECT-TYPE
FROM RFC-1212
-- DisplayString
-- FROM RFC1213-MIB
-- tcl enterprises
-- IpAddress,
-- Counter, Gauge
TimeTicks
FROM RFC1155-SMI
-- These Objects are defined in the file sfps-inc.mib.txt.0.0.2
sfpsFloodCounters, sfpsFloodCountersReset, sfpsIsolatedSwitch, sfpsResetNVRAM
FROM CTRON-SFPS-INCLUDE-MIB;
-- Textual Conventions
--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
-- this will map to chassis.module index value
--SfpsSwitchPort ::= INTEGER
-- this will map to chassis.module.portgroup.portsubgroup.port index value
SfpsAddress ::= OCTET STRING (SIZE (6))
-- this will map to a MAC address
--HexInteger ::= INTEGER
-- display this integer in hex format
-- SFPS Diagnostic Statistics Group
sfpsFloodCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsFloodCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of flood count information."
::= { sfpsFloodCounters 1 }
sfpsFloodCountersEntry OBJECT-TYPE
SYNTAX SfpsFloodCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry is instanced by the Source MAC address."
INDEX { sfpsFloodCountersSource }
::= { sfpsFloodCountersTable 1 }
SfpsFloodCountersEntry ::=
SEQUENCE {
sfpsFloodCountersSource SfpsAddress,
sfpsFloodCountersNumFloods INTEGER,
sfpsFloodCountersLastSeqNum INTEGER,
sfpsFloodCountersNumDrops INTEGER,
sfpsFloodCountersLastDropTime TimeTicks,
sfpsFloodCountersMaxDrops INTEGER,
sfpsFloodCountersMaxDropsTime TimeTicks
}
sfpsFloodCountersSource OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Source Mac Address."
::= { sfpsFloodCountersEntry 1 }
sfpsFloodCountersNumFloods OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of floods caused by this Source MAC."
::= { sfpsFloodCountersEntry 2 }
sfpsFloodCountersLastSeqNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last Sequence number."
::= { sfpsFloodCountersEntry 3 }
sfpsFloodCountersNumDrops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of drops for that Source MAC.."
::= { sfpsFloodCountersEntry 4 }
sfpsFloodCountersLastDropTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time tick on when the last drop occurred for that
Source MAC.."
::= { sfpsFloodCountersEntry 5 }
sfpsFloodCountersMaxDrops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum drops for that Source MAC."
::= { sfpsFloodCountersEntry 6 }
sfpsFloodCountersMaxDropsTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time tick on when the maximum drops occurred
for that Source MAC."
::= { sfpsFloodCountersEntry 7 }
-- Flood Counters Reset
sfpsFloodCountersResetReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the Flood counters (1 to reset)."
::= { sfpsFloodCountersReset 1 }
sfpsFloodCountersTotalDropped OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of drops based on sequence numbers for the switch."
::= { sfpsFloodCountersReset 2 }
sfpsFloodCountersTotalRunts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of runt packets originated from the Flooder."
::= { sfpsFloodCountersReset 3 }
sfpsFloodCountersTotalSelfOrig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of floods that the switch sees that were generated
from itself."
::= { sfpsFloodCountersReset 4 }
sfpsFloodCountersNonNetPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of floods received on non-Network ports."
::= { sfpsFloodCountersReset 5 }
-- Isoloated Switch
sfpsIsolatedSwitchIsolatedSwitch OBJECT-TYPE
SYNTAX INTEGER {
-- no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Designates whether this switch has determined that it is an
Isolated switch."
::= { sfpsIsolatedSwitch 1 }
sfpsIsolatedSwitchResetCounters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clears the INBDropped and INBNotSent counters."
::= { sfpsIsolatedSwitch 2 }
sfpsIsolatedSwitchINBDropped OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"During the time that switch has not converged, this number should
increment. It should not increment once things are stable."
::= { sfpsIsolatedSwitch 3 }
sfpsIsolatedSwitchINBNotSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the packet not sent out the INB. Used for debugging
purposes."
::= { sfpsIsolatedSwitch 4 }
-- Reset NVRAM
sfpsResetNVRAMPercentNvramAvailable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percent of Nvram available."
::= { sfpsResetNVRAM 1 }
sfpsResetNVRAMTotalNVRAM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total amount of Nvram."
::= { sfpsResetNVRAM 2 }
sfpsResetNVRAMOnetoResetNvramAndRestoreIP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sfpsResetNVRAM 3 }
sfpsResetNVRAMDelayTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sfpsResetNVRAM 4 }
END