david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/fs/GBNDeviceSWAPI-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

3260 lines
126 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
--
-- File : bcmSwapi.mib
--
--
-- Copyright (c) 1999 admin Systems, Inc. All Rights Reserved.
--
-- Reproduction of this document is authorized on condition that this
-- copyright notice is included. This GBN CCD MIB Specification
-- embodies proprietary intellectual property of admin Systems (ADMIN).
-- ADMIN retains all title and ownership in the specification, including any
-- revisions.
--
-- It is the intent of ADMIN to encourage the widespread use of this
-- specification in connection with the management of GBN products.
-- ADMIN grants vendor, end-users, and other interested parties a non-exclusive
-- license to use this specification in connection with the management of
-- GBN based products.
--
-- This specification is supplied "AS IS", and ADMIN makes no
-- warranty, either express or implied, as to the use, operations,
-- condition, or performance of this specification.
--
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- Groups in the ADMIN SWAPI MIB
--
-- The following groups are supported for the ADMIN GBN Enterprise MIB:
--
-- sRFC1573MIB Support for RFC1213 and RFC1573
-- sRFC1493MIB Support for multiple SPT's
-- sRFC1757MIB Support for Stat's group only
-- sRFC2233MIB Support for the Mau Mib (AutoNeg)
-- sDot1QMIB Support for the 802.1Q Mib
-- sDot1XMIB Support for the 802.1X Mib
-- sDot1pMIB Support for the 802.1p Mib
-- sRFC1643MIB Support for the Ether like Interfaces Mib
-- sArch Support for Architecture
-- sChip Support for Switch (NOT Supported Yet)
--
------------------------------------------------------------------------------
------------------------------------------------------------------------------
GBNDeviceSWAPI-MIB
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Integer32, Unsigned32, TimeTicks, BITS,
Gauge32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, MacAddress, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString, PhysAddress FROM RFC1213-MIB
gbnDevice FROM ADMIN-MASTER-MIB
IANAifType FROM IANAifType-MIB;
bcmSwapi MODULE-IDENTITY
LAST-UPDATED "0105030000Z" -- May 03,2001
ORGANIZATION "admin Systems, Inc."
CONTACT-INFO "admin E-mail: "
DESCRIPTION "SWAPI for Switch End Driver
100Mb/s and 1000Mb/s Management."
REVISION "0105030000Z" -- May 03,2001
DESCRIPTION "Updated to include support for 1000 Mb/sec
MAUs and flow control negotiation."
::= { gbnDevice 2 }
--SMI BITS
--
-- SWAPI MIB Extensions
--
sRFC1573MIB OBJECT IDENTIFIER ::= { bcmSwapi 2 }
sRFC1573Interfaces OBJECT IDENTIFIER ::= { sRFC1573MIB 3 }
-- Bridge MIB starts at 17
sRFC1493MIB OBJECT IDENTIFIER ::= { bcmSwapi 4 }
sDot1dBase OBJECT IDENTIFIER ::= { sRFC1493MIB 1 }
sDot1dStp OBJECT IDENTIFIER ::= { sRFC1493MIB 2 }
sDot1dTp OBJECT IDENTIFIER ::= { sRFC1493MIB 4 }
-- RMON starts at MIB-II
sRFC1757MIB OBJECT IDENTIFIER ::= { bcmSwapi 5}
sRFC1757Statistics OBJECT IDENTIFIER ::= {sRFC1757MIB 1 }
sRFC2239MIB OBJECT IDENTIFIER ::= { bcmSwapi 6}
sDot3IfMauBasicGroup OBJECT IDENTIFIER ::= { sRFC2239MIB 2 }
sDot3IfMauAutoNegGroup OBJECT IDENTIFIER ::= { sRFC2239MIB 5 }
sDot1pMIB OBJECT IDENTIFIER ::= { bcmSwapi 7}
sDot1dExtBase OBJECT IDENTIFIER ::= { sDot1pMIB 1 }
sDot1dPriority OBJECT IDENTIFIER ::= { sDot1pMIB 2 }
sDot1dGarp OBJECT IDENTIFIER ::= { sDot1pMIB 3 }
sDot1dGmrp OBJECT IDENTIFIER ::= { sDot1pMIB 4 }
sDot1QMIB OBJECT IDENTIFIER ::= { bcmSwapi 8}
sDot1qBase OBJECT IDENTIFIER ::= { sDot1QMIB 1 }
sDot1qTp OBJECT IDENTIFIER ::= { sDot1QMIB 2 }
sDot1qStatic OBJECT IDENTIFIER ::= { sDot1QMIB 3 }
sDot1qVlan OBJECT IDENTIFIER ::= { sDot1QMIB 4 }
sRFC1643MIB OBJECT IDENTIFIER ::= { bcmSwapi 9}
sRFC1643Dot3 OBJECT IDENTIFIER ::= { sRFC1643MIB 1 }
sDot1XMIB OBJECT IDENTIFIER ::= { bcmSwapi 10}
sDot1xBase OBJECT IDENTIFIER ::= { sDot1XMIB 1 }
sArch OBJECT IDENTIFIER ::= { bcmSwapi 4096}
sArchSwitchInfo OBJECT IDENTIFIER ::= { sArch 1 }
sSwitchStatsInfo OBJECT IDENTIFIER ::= { sArch 2 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
TimeFilter ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"To be used for the index to a table. Allows an application
to download only those rows changed since a particular time.
A row is considered changed if the value of any object in the
row changes or if the row is created or deleted.
When sysUpTime is equal to zero, this table shall be empty.
One entry exists for each past value of sysUpTime, except that
the whole table is purged should sysUpTime wrap.
As this basic row is updated new conceptual rows are created
(which still share the now updated object values with all
other instances). The number of instances which are created
is determined by the value of sysUpTime at which the basic row
was last updated. One instance will exist for each value of
sysUpTime at the last update time for the row. A new
timeMark instance is created for each new sysUpTime value.
Each new conceptual row will be associated with the timeMark
instance which was created at the value of sysUpTime with
which the conceptual row is to be associated.
By definition all conceptual rows were updated at or after
time zero and so at least one conceptual row (associated with
timeMark.0) must exist for each underlying (basic) row.
See the appendix for further discussion of this variable.
Consider the following fooTable:
fooTable ...
INDEX { fooTimeMark, fooIndex }
FooEntry {
fooTimeMark TimeFilter
fooIndex INTEGER,
fooCounts Counter
}
Should there be two basic rows in this table (fooIndex == 1,
fooIndex == 2) and row 1 was updated most recently at time 6,
while row 2 was updated most recently at time 8, and both rows
had been updated on several earlier occasions such that the
current values were 5 and 9 respectively then the following
fooCounts instances would exist.
fooCounts.0.1 5
fooCounts.0.2 9
fooCounts.1.1 5
fooCounts.1.2 9
fooCounts.2.1 5
fooCounts.2.2 9
fooCounts.3.1 5
fooCounts.3.2 9
fooCounts.4.1 5
fooCounts.4.2 9
fooCounts.5.1 5
fooCounts.5.2 9
fooCounts.6.1 5
fooCounts.6.2 9
fooCounts.7.2 9 -- note that row 1 doesn't exist for
fooCounts.8.2 9 -- times 7 and 8"
SYNTAX TimeTicks
-- The Generic Bridge Port Table
sDot1dBasePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included."
::= { sDot1dBase 4 }
sDot1dBasePortEntry OBJECT-TYPE
SYNTAX SwapiDot1dBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port of the
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
INDEX { sDot1dBasePort }
::= { sDot1dBasePortTable 1 }
SwapiDot1dBasePortEntry ::=
SEQUENCE {
sDot1dBasePort
INTEGER,
sDot1dBaseIfIndex
INTEGER,
sDot1dBasePortMtuExceededDiscards
Counter32
}
sDot1dBasePort OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains bridge management information."
::= { sDot1dBasePortEntry 1 }
sDot1dBaseIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port."
::= { sDot1dBasePortEntry 2 }
sDot1dBasePortMtuExceededDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded by this port due
to an excessive size. It is incremented by both
transparent and source route bridges."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { sDot1dBasePortEntry 5 }
-- The Spanning Tree Port Table
sDot1dStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { sDot1dStp 15 }
sDot1dStpPortEntry OBJECT-TYPE
SYNTAX SwapiDot1dStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { sDot1dStpPort }
::= { sDot1dStpPortTable 1 }
SwapiDot1dStpPortEntry ::=
SEQUENCE {
sDot1dStpPort INTEGER,
sDot1dStpPortState INTEGER,
sDot1dStpPortEnable INTEGER
}
sDot1dStpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { sDot1dStpPortEntry 1 }
sDot1dStpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { sDot1dStpPortEntry 2 }
sDot1dStpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { sDot1dStpPortEntry 3 }
sDot1dTpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { sDot1dTp 1 }
sDot1dTpAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds.But in TiNet S2008Ei,
the value is from 16 to 4080 in 16 increments."
--"<22><><EFBFBD><EFBFBD>TiNet S2008EI<45><49><EFBFBD><EFBFBD>ֵΪ16<31><36>4080<38><30><EFBFBD><EFBFBD><EFBFBD>ұ<EFBFBD><D2B1><EFBFBD>Ϊ16<31>ı<EFBFBD><C4B1><EFBFBD><EFBFBD><EFBFBD>"
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { sDot1dTp 2 }
-- The Forwarding Database for Transparent Bridges
sDot1dTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Sdot1dTpFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame."
::= { sDot1dTp 3 }
sDot1dTpFdbEntry OBJECT-TYPE
SYNTAX Sdot1dTpFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information."
INDEX { sDot1dTpFdbAddress }
::= { sDot1dTpFdbTable 1 }
Sdot1dTpFdbEntry ::=
SEQUENCE {
sDot1dTpFdbAddress
MacAddress,
sDot1dTpFdbPort
INTEGER,
sDot1dTpFdbStatus
INTEGER
}
sDot1dTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unicast MAC address for which the bridge has
forwarding and/or filtering information."
REFERENCE
"IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
::= { sDot1dTpFdbEntry 1 }
sDot1dTpFdbPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Either the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of dot1dTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address (e.g. in the dot1dStaticTable).
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
dot1dTpFdbStatus is not learned(3)."
::= { sDot1dTpFdbEntry 2 }
sDot1dTpFdbStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of this entry. The meanings of the
values are:
other(1) : none of the following. This would
include the case where some other
MIB object (not the corresponding
instance of dot1dTpFdbPort, nor an
entry in the dot1dStaticTable) is
being used to determine if and how
frames addressed to the value of
the corresponding instance of
dot1dTpFdbAddress are being
forwarded.
invalid(2) : this entry is not longer valid
(e.g., it was learned but has since
aged-out), but has not yet been
flushed from the table.
learned(3) : the value of the corresponding
instance of dot1dTpFdbPort was
learned, and is being used.
self(4) : the value of the corresponding
instance of dot1dTpFdbAddress
represents one of the bridge's
addresses. The corresponding
instance of dot1dTpFdbPort
indicates which of the bridge's
ports has this address.
mgmt(5) : the value of the corresponding
instance of dot1dTpFdbAddress is
also the value of an existing
instance of dot1dStaticAddress."
::= { sDot1dTpFdbEntry 3 }
-- Start of RMON statistics Group
-- The Ethernet Statistics Group
--
-- Implementation of the Ethernet Statistics group is
-- optional.
--
-- The ethernet statistics group contains statistics
-- measured by the probe for each monitored interface on
-- this device. These statistics take the form of free
-- running counters that start from zero when a valid entry
-- is created.
--
-- This group currently has statistics defined only for
-- Ethernet interfaces. Each etherStatsEntry contains
-- statistics for one Ethernet interface. The probe must
-- create one etherStats entry for each monitored Ethernet
-- interface on the device.
sEtherStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiEtherStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet statistics entries."
::= { sRFC1757Statistics 1 }
sEtherStatsEntry OBJECT-TYPE
SYNTAX SwapiEtherStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1"
INDEX { sEtherStatsIndex }
::= { sEtherStatsTable 1 }
SwapiEtherStatsEntry ::= SEQUENCE {
sEtherStatsIndex INTEGER,
sEtherStatsDropEvents Counter32,
sEtherStatsOctets Counter32,
sEtherStatsPkts Counter32,
sEtherStatsBroadcastPkts Counter32,
sEtherStatsMulticastPkts Counter32,
sEtherStatsCRCAlignErrors Counter32,
sEtherStatsUndersizePkts Counter32,
sEtherStatsOversizePkts Counter32,
sEtherStatsFragments Counter32,
sEtherStatsJabbers Counter32,
sEtherStatsCollisions Counter32,
sEtherStatsPkts64Octets Counter32,
sEtherStatsPkts65to127Octets Counter32,
sEtherStatsPkts128to255Octets Counter32,
sEtherStatsPkts256to511Octets Counter32,
sEtherStatsPkts512to1023Octets Counter32,
sEtherStatsPkts1024to1518Octets Counter32,
sEtherStatsRXMACControlFrames Counter32,
sEtherStatsRXPauseMACCtrlFrames Counter32,
sEtherStatsTXPauseMACCtrlFrames Counter32,
sEtherStatsBcmIPMCBridgedPckts Counter32,
sEtherStatsBcmIPMCRoutedPckts Counter32,
sEtherStatsBcmIPMCInDroppedPckts Counter32,
sEtherStatsBcmIPMCOutDroppedPckts Counter32,
sEtherStatsIfInFrameRate Counter32,
sEtherStatsIfInOctetRate Counter32,
sEtherStatsIfOutFrameRate Counter32,
sEtherStatsIfOutOctetRate Counter32
}
sEtherStatsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this
etherStats entry. Defined as a single port via the MIB-II ifIndex."
::= { sEtherStatsEntry 1 }
sEtherStatsDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has been detected."
::= { sEtherStatsEntry 3 }
sEtherStatsOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
This object can be used as a reasonable estimate of
ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets
objects should be sampled before and after a common
interval. The differences in the sampled values are
Pkts and Octets, respectively, and the number of
seconds in the interval is Interval. These values
are used to calculate the Utilization as follows:
Pkts * (9.6 + 6.4) + (Octets * .8)
Utilization = -------------------------------------
Interval * 10,000
The result of this equation is the value Utilization
which is the percent utilization of the ethernet
segment on a scale of 0 to 100 percent."
::= { sEtherStatsEntry 4 }
sEtherStatsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad packets,
broadcast packets, and multicast packets) received."
::= { sEtherStatsEntry 5 }
sEtherStatsBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets."
::= { sEtherStatsEntry 6 }
sEtherStatsMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets received that were
directed to a multicast address. Note that this
number does not include packets directed to the
broadcast address."
::= { sEtherStatsEntry 7 }
sEtherStatsCRCAlignErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error)."
::= { sEtherStatsEntry 8 }
sEtherStatsUndersizePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed."
::= { sEtherStatsEntry 9 }
sEtherStatsOversizePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed."
::= { sEtherStatsEntry 10 }
sEtherStatsFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were less
than 64 octets in length (excluding framing bits but
including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that it is entirely normal for
etherStatsFragments to increment. This is because
it counts both runts (which are normal occurrences
due to collisions) and noise hits."
::= { sEtherStatsEntry 11 }
sEtherStatsJabbers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms."
::= { sEtherStatsEntry 12 }
sEtherStatsCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of
the RMON probe. Section 8.2.1.3 (10BASE-5) and
section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
states that a station must detect a collision, in
the receive mode, if three or more stations are
transmitting simultaneously. A repeater port must
detect a collision when two or more stations are
transmitting simultaneously. Thus a probe placed on
a repeater port could record more collisions than a
probe connected to a station on the same segment
would.
Probe location plays a much smaller role when
considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
standard 802.3 defines a collision as the
simultaneous presence of signals on the DO and RD
circuits (transmitting and receiving at the same
time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes
placed on a station and a repeater, should report
the same number of collisions.
Note also that an RMON probe inside a repeater
should ideally report collisions between the
repeater and one or more other hosts (transmit
collisions as defined by IEEE 802.3k) plus receiver
collisions observed on any coax segments to which
the repeater is connected."
::= { sEtherStatsEntry 13 }
sEtherStatsPkts64Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets)."
::= { sEtherStatsEntry 14 }
sEtherStatsPkts65to127Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { sEtherStatsEntry 15 }
sEtherStatsPkts128to255Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { sEtherStatsEntry 16 }
sEtherStatsPkts256to511Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { sEtherStatsEntry 17 }
sEtherStatsPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { sEtherStatsEntry 18 }
sEtherStatsPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { sEtherStatsEntry 19 }
sEtherStatsRXMACControlFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MAC control frames received."
--<2D><><EFBFBD>յ<EFBFBD>MAC<41><43><EFBFBD><EFBFBD>֡<EFBFBD><D6A1><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 20 }
sEtherStatsRXPauseMACCtrlFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of pause frames received."
--<2D><><EFBFBD>յ<EFBFBD>PAUSE<53><45><EFBFBD><EFBFBD>֡<EFBFBD><D6A1><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 21 }
sEtherStatsTXPauseMACCtrlFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of pause frames transmitted."
--<2D><><EFBFBD>͵<EFBFBD>PAUSE<53><45><EFBFBD><EFBFBD>֡<EFBFBD><D6A1><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 22 }
sEtherStatsBcmIPMCBridgedPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPMC packets bridged."
--<2D><><EFBFBD><EFBFBD>ת<EFBFBD><D7AA><EFBFBD><EFBFBD>IPMC<4D><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 23 }
sEtherStatsBcmIPMCRoutedPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPMC packets routed."
--<2D><><EFBFBD><EFBFBD>·<EFBFBD>ɵ<EFBFBD>IPMC<4D><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 24 }
sEtherStatsBcmIPMCInDroppedPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPMC dropped packets for this port in the ingress."
--<2D>ö˿<C3B6>ingress<73>߼<EFBFBD><DFBC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>IPMC<4D><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 25 }
sEtherStatsBcmIPMCOutDroppedPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPMC dropped packets for this port in the egress."
--<2D>ö˿<C3B6>egress<73>߼<EFBFBD><DFBC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>IPMC<4D><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
::= { sEtherStatsEntry 26 }
sEtherStatsIfInFrameRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ingress packet rate of this port."
--<2D>ö˿ڽ<CBBF><DABD>ձ<EFBFBD><D5B1>ĵ<EFBFBD><C4B5><EFBFBD><EFBFBD><EFBFBD>
::= { sEtherStatsEntry 27 }
sEtherStatsIfInOctetRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ingress octet rate of this port."
--<2D>ö˿ڽ<CBBF><DABD>ձ<EFBFBD><D5B1><EFBFBD><EFBFBD>ֽڵ<D6BD><DAB5><EFBFBD><EFBFBD><EFBFBD>
::= { sEtherStatsEntry 28 }
sEtherStatsIfOutFrameRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The egress packet rate of this port."
--<2D>ö˿ڷ<CBBF><DAB7>ͱ<EFBFBD><CDB1>ĵ<EFBFBD><C4B5><EFBFBD><EFBFBD><EFBFBD>
::= { sEtherStatsEntry 29 }
sEtherStatsIfOutOctetRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The egress octet rate of this port."
--<2D>ö˿ڷ<CBBF><DAB7>ͱ<EFBFBD><CDB1><EFBFBD><EFBFBD>ֽڵ<D6BD><DAB5><EFBFBD><EFBFBD><EFBFBD>
::= { sEtherStatsEntry 30 }
--
-- The Basic Interface MAU Table
--
sIfMauTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiIfMauEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of descriptive and status information about
MAU(s) attached to an interface."
::= { sDot3IfMauBasicGroup 1 }
sIfMauEntry OBJECT-TYPE
SYNTAX SwapiIfMauEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information
about a single MAU."
INDEX { sIfMauIndex }
::= { sIfMauTable 1 }
SwapiIfMauEntry ::=
SEQUENCE {
sIfMauIndex Integer32,
sIfMauType OBJECT IDENTIFIER,
sIfMauMediaAvailable INTEGER,
sIfMauJabberState INTEGER,
sIfMauDefaultType OBJECT IDENTIFIER
}
sIfMauIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (sIfMauIfIndex)."
REFERENCE
"[IEEE 802.3 Mgt], 30.5.1.1.1, aMAUID."
::= { sIfMauEntry 2 }
sIfMauType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the 10 or 100 Mb/s
baseband or broadband MAU type. An initial set of
MAU types are defined above. The assignment of
OBJECT IDENTIFIERs to new types of MAUs is managed
by the IANA. If the MAU type is unknown, the
object identifier
unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownMauType is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER
must be able to generate and recognize this value.
This object represents the operational type of the
MAU, as determined by either (1) the result of the
auto-negotiation function or (2) if auto-
negotiation is not enabled or is not implemented
for this MAU, by the value of the object
sIfMauDefaultType. In case (2), a set to the
object sIfMauDefaultType will force the MAU into
the new operating mode."
REFERENCE
"[IEEE 802.3 Mgt], 30.5.1.1.2, aMAUType."
::= { sIfMauEntry 3 }
sIfMauMediaAvailable OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
available(3),
notAvailable(4),
remoteFault(5),
invalidSignal(6),
remoteJabber(7),
remoteLinkLoss(8),
remoteTest(9),
offline(10),
autoNegError(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the MAU is a link or fiber type (FOIRL,
10BASE-T, 10BASE-F) then this is equivalent to
the link test fail state/low light function.
For an AUI or a coax (including broadband) MAU
this indicates whether or not loopback is
detected on the DI circuit. The value of this
attribute persists between packets for MAU types
AUI, 10BASE5, 10BASE2, 10BROAD36, and 10BASE-FP.
The value other(1) is returned if the
mediaAvailable state is not one of 2 through 11.
The value unknown(2) is returned when the MAU's
true state is unknown; for example, when it is
being initialized. At power-up or following a
reset, the value of this attribute will be
unknown for AUI, coax, and 10BASE-FP MAUs. For
these MAUs loopback will be tested on each
transmission during which no collision is
detected. If DI is receiving input when DO
returns to IDL after a transmission and there
has been no collision during the transmission
then loopback will be detected. The value of
this attribute will only change during
non-collided transmissions for AUI, coax, and
10BASE-FP MAUs.
For 100Mbps and 1000Mbps MAUs, the enumerations
match the states within the respective link
integrity state diagrams, fig 32-16, 23-12 and
24-15 of sections 32, 23 and 24 of [2]. Any MAU
which implements management of auto-negotiation
will map remote fault indication to remote
fault.
The value available(3) indicates that the link,
light, or loopback is normal. The value
notAvailable(4) indicates link loss, low light,
or no loopback.
The value remoteFault(5) indicates that a fault
has been detected at the remote end of the link.
This value applies to 10BASE-FB, 100BASE-T4 Far
End Fault Indication and non-specified remote
faults from a system running auto-negotiation.
The values remoteJabber(7), remoteLinkLoss(8),
and remoteTest(9) SHOULD be used instead of
remoteFault(5) where the reason for remote fault
is identified in the remote signaling protocol.
The value invalidSignal(6) indicates that an
invalid signal has been received from the other
end of the link. InvalidSignal(6) applies only
to MAUs of type 10BASE-FB.
Where an IEEE Std 802.3u-1995 clause 22 MII
is present, a logic one in the remote fault bit
(reference section 22.2.4.2.8 of that document)
maps to the value remoteFault(5), and a logic
zero in the link status bit (reference section
22.2.4.2.10 of that document) maps to the value
notAvailable(4). The value notAvailable(4)
takes precedence over the value remoteFault(5).
Any MAU that implements management of clause 37
Auto-Negotiation will map the received RF1 and
RF2 bit values for Offline to offline(10), Link
Failure to remoteFault(5) and Auto-Negotiation
Error to autoNegError(11)."
REFERENCE
"[IEEE 802.3 Mgt], 30.5.1.1.4, aMediaAvailable."
::= { sIfMauEntry 5 }
sIfMauJabberState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
noJabber(3),
jabbering(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent must always
return other(1) for MAU type dot3MauTypeAUI.
The value unknown(2) is returned when the MAU's
true state is unknown; for example, when it is
being initialized.
If the MAU is not jabbering the agent returns
noJabber(3). This is the 'normal' state.
If the MAU is in jabber state the agent returns
the jabbering(4) value."
REFERENCE
"[IEEE 802.3 Mgt], 30.5.1.1.6,
aJabber.jabberFlag."
::= { sIfMauEntry 7 }
sIfMauDefaultType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the default administrative
10 or 100 Mb/s baseband MAU type, to be used in
conjunction with the operational MAU type denoted
by sIfMauType.
The set of possible values for this object is the
same as the set defined for the sIfMauType object.
This object represents the administratively-
configured type of the MAU. If auto-negotiation
is not enabled or is not implemented for this MAU,
the value of this object determines the
operational type of the MAU. In this case, a set
to this object will force the MAU into the
specified operating mode.
If auto-negotiation is implemented and enabled for
this MAU, the operational type of the MAU is
determined by auto-negotiation, and the value of
this object denotes the type to which the MAU will
automatically revert if/when auto-negotiation is
later disabled.
NOTE TO IMPLEMENTORS: It may be necessary to
provide for underlying hardware implementations
which do not follow the exact behavior specified
above. In particular, when
sIfMauAutoNegAdminStatus transitions from enabled
to disabled, the agent implementation must ensure
that the operational type of the MAU (as reported
by sIfMauType) correctly transitions to the value
specified by this object, rather than continuing
to operate at the value earlier determined by the
auto-negotiation function."
REFERENCE
"[IEEE 802.3 Mgt], 30.5.1.1.1, aMAUID, and [IEEE
802.3 Std], 22.2.4.1.4."
::= { sIfMauEntry 11 }
-- The sIfMauAutoNegTable applies to systems in which
-- auto-negotiation is supported on one or more MAUs
-- attached to interfaces. Note that if auto-negotiation
-- is present and enabled, the sIfMauType object reflects
-- the result of the auto-negotiation function.
sIfMauAutoNegTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiIfMauAutoNegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration and status objects for the auto-
negotiation function of MAUs attached to
interfaces."
::= { sDot3IfMauAutoNegGroup 1 }
sIfMauAutoNegEntry OBJECT-TYPE
SYNTAX SwapiIfMauAutoNegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing configuration
and status information for the auto-negotiation
function of a particular MAU."
INDEX { sIfMauIndex }
::= { sIfMauAutoNegTable 1 }
SwapiIfMauAutoNegEntry ::=
SEQUENCE {
sIfMauAutoNegAdminStatus INTEGER,
sIfMauAutoNegRestart INTEGER,
sIfMauAutoControl INTEGER,
sIfMauAutoNegCapAdvertisedBits BITS,
sIfMauAutoNegCapReceivedBits BITS
}
sIfMauAutoNegAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to enabled(1) will cause the
interface which has the auto-negotiation signaling
ability to be enabled.
If the value of this object is disabled(2) then
the interface will act as it would if it had no
auto-negotiation signaling. Under these
conditions, an IEEE 802.3 MAU will immediately be
forced to the state indicated by the value of the
object sIfMauDefaultType.
NOTE TO IMPLEMENTORS: When
sIfMauAutoNegAdminStatus transitions from enabled
to disabled, the agent implementation must ensure
that the operational type of the MAU (as reported
by sIfMauType) correctly transitions to the value
specified by the sIfMauDefaultType object, rather
than continuing to operate at the value earlier
determined by the auto-negotiation function."
REFERENCE
"[IEEE 802.3 Mgt], 30.6.1.1.2, aAutoNegAdminState
and 30.6.1.2.2, acAutoNegAdminControl."
::= { sIfMauAutoNegEntry 1 }
sIfMauAutoNegRestart OBJECT-TYPE
SYNTAX INTEGER {
restart(1),
norestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the value of this object is set to restart(1)
then this will force auto-negotiation to begin
link renegotiation. If auto-negotiation signaling
is disabled, a write to this object has no effect.
Setting the value of this object to norestart(2)
has no effect."
REFERENCE
"[IEEE 802.3 Mgt], 30.6.1.2.1,
acAutoNegRestartAutoConfig."
::= { sIfMauAutoNegEntry 8 }
sIfMauAutoNegCapAdvertisedBits OBJECT-TYPE
SYNTAX BITS {
bOther(0), -- other or unknown
b10baseT(1), -- 10BASE-T half duplex mode
b10baseTFD(2), -- 10BASE-T full duplex mode
b100baseT4(3), -- 100BASE-T4
b100baseTX(4), -- 100BASE-TX half duplex mode
b100baseTXFD(5), -- 100BASE-TX full duplex mode
b100baseT2(6), -- 100BASE-T2 half duplex mode
b100baseT2FD(7), -- 100BASE-T2 full duplex mode
bFdxPause(8), -- PAUSE for full-duplex links
bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
-- links
bFdxSPause(10), -- Symmetric PAUSE for full-duplex
-- links
bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
-- full-duplex links
b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
-- duplex mode
b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
-- duplex mode
b1000baseT(14), -- 1000BASE-T half duplex mode
b1000baseTFD(15) -- 1000BASE-T full duplex mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value that uniquely identifies the set of
capabilities advertised by the local
auto-negotiation entity.
Capabilities in this object that are not
available in ifMauAutoNegCapability cannot be
enabled."
REFERENCE "[IEEE 802.3 Std], 30.6.1.1.6,
aAutoNegAdvertisedTechnologyAbility."
::= { sIfMauAutoNegEntry 10 }
sIfMauAutoNegCapReceivedBits OBJECT-TYPE
SYNTAX BITS {
bOther(0), -- other or unknown
b10baseT(1), -- 10BASE-T half duplex mode
b10baseTFD(2), -- 10BASE-T full duplex mode
b100baseT4(3), -- 100BASE-T4
b100baseTX(4), -- 100BASE-TX half duplex mode
b100baseTXFD(5), -- 100BASE-TX full duplex mode
b100baseT2(6), -- 100BASE-T2 half duplex mode
b100baseT2FD(7), -- 100BASE-T2 full duplex mode
bFdxPause(8), -- PAUSE for full-duplex links
bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
-- links
bFdxSPause(10), -- Symmetric PAUSE for full-duplex
-- links
bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
-- full-duplex links
b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
-- duplex mode
b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
-- duplex mode
b1000baseT(14), -- 1000BASE-T half duplex mode
b1000baseTFD(15) -- 1000BASE-T full duplex mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value that uniquely identifies the set of
capabilities received from the remote
auto-negotiation entity.
Note that interfaces that support this MIB may
be attached to remote auto-negotiation entities
which have capabilities beyond the scope of this
MIB."
REFERENCE "[IEEE 802.3 Std], 30.6.1.1.7,
aAutoNegReceivedTechnologyAbility."
::= { sIfMauAutoNegEntry 11 }
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- The following are from the 802.1p MIB
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- the sDot1dExtBase group
-- -------------------------------------------------------------
sDot1dDeviceCapabilities OBJECT-TYPE
SYNTAX BITS {
sDot1dExtendedFilteringServices(0),
-- can perform filtering of
-- individual multicast addresses
-- controlled by GMRP.
sDot1dTrafficClasses(1),
-- can map user priority to
-- multiple traffic classes.
dot1qStaticEntryIndividualPort(2),
-- dot1qStaticUnicastReceivePort &
-- dot1qStaticMulticastReceivePort
-- can represent non-zero entries.
dot1qIVLCapable(3), -- Independent VLAN Learning.
dot1qSVLCapable(4), -- Shared VLAN Learning.
dot1qHybridCapable(5),
-- both IVL & SVL simultaneously.
dot1qConfigurablePvidTagging(6),
-- whether the implementation
-- supports the ability to
-- override the default PVID
-- setting and its egress status
-- (VLAN-Tagged or Untagged) on
-- each port.
sDot1dLocalVlanCapable(7)
-- can support multiple local
-- bridges, outside of the scope
-- of 802.1Q defined VLANs.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the optional parts of IEEE 802.1D and 802.1Q
that are implemented by this device and are manageable
through this MIB. Capabilities that are allowed on a
per-port basis are indicated in sDot1dPortCapabilities."
REFERENCE
"ISO/IEC 15802-3 Section 5.2,
IEEE 802.1Q/D11 Section 5.2, 12.10.1.1.3/b/2"
::= { sDot1dExtBase 1 }
sDot1dTrafficClassesEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { true }
The value true(1) indicates that Traffic Classes are
enabled on this bridge. When false(2), the bridge
operates with a single priority level for all traffic."
DEFVAL { true }
::= { sDot1dExtBase 2 }
sDot1dGmrpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { enable }
The administrative status requested by management for
GMRP. The value enabled(1) indicates that GMRP should
be enabled on this device, in all VLANs, on all ports
for which it has not been specifically disabled. When
disabled(2), GMRP is disabled, in all VLANs, on all
ports and all GMRP packets will be forwarded
transparently. This object affects both Applicant and
Registrar state machines. A transition from disabled(2)
to enabled(1) will cause a reset of all GMRP state
machines on all ports."
DEFVAL { enabled }
::= { sDot1dExtBase 3 }
-- -------------------------------------------------------------
-- Port Capabilities Table
-- -------------------------------------------------------------
sDot1dPortCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dPortCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains capabilities information about
every port that is associated with this bridge."
::= { sDot1dExtBase 4 }
sDot1dPortCapabilitiesEntry OBJECT-TYPE
SYNTAX SwapiDot1dPortCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of capabilities information about this port
indexed by sDot1dBasePort."
AUGMENTS { sDot1dBasePortEntry }
::= { sDot1dPortCapabilitiesTable 1 }
SwapiDot1dPortCapabilitiesEntry ::=
SEQUENCE {
sDot1dPortCapabilities
BITS
}
sDot1dPortCapabilities OBJECT-TYPE
SYNTAX BITS {
dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of
-- frames and GVRP.
dot1qConfigurableAcceptableFrameTypes(1),
-- allows modified values of
-- dot1qPortAcceptableFrameTypes.
dot1qIngressFiltering(2)
-- supports the discarding of any
-- frame received on a Port whose
-- VLAN classification does not
-- include that Port in its Member
-- set.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the parts of IEEE 802.1D and 802.1Q that are
optional on a per-port basis that are implemented by
this device and are manageable through this MIB."
REFERENCE
"ISO/IEC 15802-3 Section 5.2,
IEEE 802.1Q/D11 Section 5.2"
::= { sDot1dPortCapabilitiesEntry 1 }
-- -------------------------------------------------------------
-- the sDot1dPriority group
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- Port Priority Table
-- -------------------------------------------------------------
sDot1dPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every port that
is associated with this transparent bridge."
::= { sDot1dPriority 1 }
sDot1dPortPriorityEntry OBJECT-TYPE
SYNTAX SwapiDot1dPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Default User Priorities for each port of a
transparent bridge. This is indexed by sDot1dBasePort."
AUGMENTS { sDot1dBasePortEntry }
::= { sDot1dPortPriorityTable 1 }
SwapiDot1dPortPriorityEntry ::=
SEQUENCE {
sDot1dPortDefaultUserPriority
INTEGER,
sDot1dPortNumTrafficClasses
INTEGER
}
sDot1dPortDefaultUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { 0:all }
The default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority."
::= { sDot1dPortPriorityEntry 1 }
sDot1dPortNumTrafficClasses OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of egress traffic classes supported on this
port. This object may optionally be read-only."
::= { sDot1dPortPriorityEntry 2 }
-- -------------------------------------------------------------
-- User Priority Regeneration Table
-- -------------------------------------------------------------
sDot1dUserPriorityRegenTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dUserPriorityRegenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Regenerated User Priorities for each received
User Priority on each port of a bridge. The Regenerated
User Priority value may be used to index the Traffic
Class Table for each input port. This only has effect
on media that support native User Priority. The default
values for Regenerated User Priorities are the same as
the User Priorities."
REFERENCE
"ISO/IEC 15802-3 Section 6.4"
::= { sDot1dPriority 2 }
sDot1dUserPriorityRegenEntry OBJECT-TYPE
SYNTAX SwapiDot1dUserPriorityRegenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping of incoming User Priority to a Regenerated
User Priority."
INDEX { sDot1dBasePort, sDot1dUserPriority }
::= { sDot1dUserPriorityRegenTable 1 }
SwapiDot1dUserPriorityRegenEntry ::=
SEQUENCE {
sDot1dUserPriority
INTEGER,
sDot1dRegenUserPriority
INTEGER
}
sDot1dUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The User Priority for a frame received on this port."
::= { sDot1dUserPriorityRegenEntry 1 }
sDot1dRegenUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Regenerated User Priority the incoming User
Priority is mapped to for this port."
::= { sDot1dUserPriorityRegenEntry 2 }
-- -------------------------------------------------------------
-- Traffic Class Table
-- -------------------------------------------------------------
sDot1dTrafficClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dTrafficClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge. Traffic class is a
number in the range (0..(sDot1dPortNumTrafficClasses-1))."
REFERENCE
"ISO/IEC 15802-3 Table 7-2"
::= { sDot1dPriority 3 }
sDot1dTrafficClassEntry OBJECT-TYPE
SYNTAX SwapiDot1dTrafficClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Priority to Traffic Class mapping."
INDEX { sDot1dBasePort, sDot1dTrafficClassPriority }
::= { sDot1dTrafficClassTable 1 }
SwapiDot1dTrafficClassEntry ::=
SEQUENCE {
sDot1dTrafficClassPriority
INTEGER,
sDot1dTrafficClass
INTEGER
}
sDot1dTrafficClassPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Priority value determined for the received frame.
This value is equivalent to the priority indicated in
the tagged frame received, or one of the evaluated
priorities, determined according to the media-type.
For untagged frames received from Ethernet media, this
value is equal to the sDot1dPortDefaultUserPriority value
for the ingress port.
For untagged frames received from non-Ethernet media,
this value is equal to the sDot1dRegenUserPriority value
for the ingress port and media-specific user priority."
::= { sDot1dTrafficClassEntry 1 }
sDot1dTrafficClass OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { 0:all }
The Traffic Class the received frame is mapped to."
::= { sDot1dTrafficClassEntry 2 }
-- -------------------------------------------------------------
-- Outbound Access Priority Table
-- -------------------------------------------------------------
sDot1dPortOutboundAccessPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dPortOutboundAccessPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping Regenerated User Priority to Outbound
Access Priority. This is a fixed mapping for all port
types, with two options for 802.5 Token Ring."
REFERENCE
"ISO/IEC 15802-3 Table 7-3"
::= { sDot1dPriority 4 }
sDot1dPortOutboundAccessPriorityEntry OBJECT-TYPE
SYNTAX SwapiDot1dPortOutboundAccessPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Regenerated User Priority to Outbound Access Priority
mapping."
INDEX { sDot1dBasePort, sDot1dRegenUserPriority }
::= { sDot1dPortOutboundAccessPriorityTable 1 }
SwapiDot1dPortOutboundAccessPriorityEntry ::=
SEQUENCE {
sDot1dPortOutboundAccessPriority
INTEGER
}
sDot1dPortOutboundAccessPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Outbound Access Priority the received frame is
mapped to."
::= { sDot1dPortOutboundAccessPriorityEntry 1 }
------------------------------------------------------------------------------
--<2D><><EFBFBD><EFBFBD><EFBFBD>й<EFBFBD>оƬ<D0BE><C6AC><EFBFBD><EFBFBD>weight<68><74>MIB
------------------------------------------------------------------------------
oemQueueWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF oemQueueWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of weight of queue ."
::= { sDot1dPriority 5 }
oemQueueWeightEntry OBJECT-TYPE
SYNTAX oemQueueWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry of weight of queue."
INDEX { oemQueue }
::= { oemQueueWeightTable 1 }
oemQueueWeightEntry ::= SEQUENCE {
oemQueue Integer32,
oemQueueWeight Integer32
}
oemQueue OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue of class"
::= { oemQueueWeightEntry 1 }
oemQueueWeight OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Weight of queue"
::= { oemQueueWeightEntry 2 }
oemDscpToCosMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF OemDscpToCosMapEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping evaluated DSCP to CoS."
::= { sDot1dPriority 6 }
oemDscpToCosMapEntry OBJECT-TYPE
SYNTAX OemDscpToCosMapEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"DSCP to CoS mapping. "
INDEX { oemDscpToCosMapDscp }
::= { oemDscpToCosMapTable 1 }
OemDscpToCosMapEntry ::=
SEQUENCE {
oemDscpToCosMapDscp
INTEGER,
oemDscpToCosMapCos
INTEGER
}
oemDscpToCosMapDscp OBJECT-TYPE
SYNTAX INTEGER(0..63)
ACCESS read-only
STATUS current
DESCRIPTION
"the DSCP value used to map to CoS. "
::= { oemDscpToCosMapEntry 1 }
oemDscpToCosMapCos OBJECT-TYPE
SYNTAX INTEGER(0..7)
ACCESS read-write
STATUS current
DESCRIPTION
"the map result CoS. "
::= { oemDscpToCosMapEntry 2 }
-- The OEM DSCP to Cos map status
oemDscpToCosMapStatus OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS current
DESCRIPTION
"the DSCP to CoS map status. "
::= { sDot1dPriority 7 }
-- -------------------------------------------------------------
-- The GMRP Port Configuration and Status Table
-- -------------------------------------------------------------
sDot1dPortGmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1dPortGmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of GMRP control and status information about
every bridge port. Augments the sDot1dBasePortTable."
::= { sDot1dGmrp 1 }
sDot1dPortGmrpEntry OBJECT-TYPE
SYNTAX SwapiDot1dPortGmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"GMRP control and status information for a bridge port."
AUGMENTS { sDot1dBasePortEntry }
::= { sDot1dPortGmrpTable 1 }
SwapiDot1dPortGmrpEntry ::=
SEQUENCE {
sDot1dPortGmrpStatus
EnabledStatus
}
sDot1dPortGmrpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state of GMRP operation on this port. The
value enabled(1) indicates that GMRP is enabled on this port
in all VLANs as long as sDot1dGmrpStatus is also enabled(1).
A value of disabled(2) indicates that GMRP is disabled on this
port in all VLANs: any GMRP packets received will
be silently discarded and no GMRP registrations will be
propagated from other ports. Setting this to a value of
enabled(1) will be stored by the agent but will only take effect
on the GMRP protocol operation if sDot1dGmrpStatus also
indicates the value enabled(1). This object affects all
GMRP Applicant and Registrar state machines on this
port. A transition from disabled(2) to enabled(1) will
cause a reset of all GMRP state machines on this port."
DEFVAL { enabled }
::= { sDot1dPortGmrpEntry 1 }
sDot1qMaxSupportedVlans OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IEEE 802.1Q VLANs that this
device supports."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.1"
::= { sDot1qBase 3 }
sDot1qGvrpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for
GVRP. The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), GVRP
is disabled on all ports and all GVRP packets will be
forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports."
DEFVAL { enabled }
::= { sDot1qBase 5 }
sDot1xStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1x status"
DEFVAL { enabled }
::= { sDot1xBase 1 }
-- -------------------------------------------------------------
-- the dot1qTp group
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- the current Filtering Database Table
-- -------------------------------------------------------------
sDot1qFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains configuration and control
information for each Filtering Database currently
operating on this device. Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable."
::= { sDot1qTp 1 }
sDot1qFdbEntry OBJECT-TYPE
SYNTAX SwapiDot1qFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific Filtering Database."
INDEX { sDot1qFdbId }
::= { sDot1qFdbTable 1 }
SwapiDot1qFdbEntry ::=
SEQUENCE {
sDot1qFdbId
Unsigned32,
sDot1qFdbDynamicCount
Counter32
}
sDot1qFdbId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identity of this Filtering Database."
::= { sDot1qFdbEntry 1 }
sDot1qFdbDynamicCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of dynamic entries in this
Filtering Database."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.1.1.3"
::= { sDot1qFdbEntry 2 }
-- -------------------------------------------------------------
-- Multiple Forwarding Databases for 802.1Q Transparent devices
-- This table is an alternative to the dot1dTpFdbTable,
-- previously defined for 802.1D devices which only support a
-- single Forwarding Database.
-- -------------------------------------------------------------
sDot1qTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Sdot1qTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7"
::= { sDot1qTp 2 }
sDot1qTpFdbEntry OBJECT-TYPE
SYNTAX Sdot1qTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information."
INDEX { sDot1qFdbId, sDot1qTpFdbAddress }
::= { sDot1qTpFdbTable 1 }
Sdot1qTpFdbEntry ::=
SEQUENCE {
sDot1qTpFdbAddress
MacAddress,
sDot1qTpFdbPort
INTEGER,
sDot1qTpFdbStatus
INTEGER
}
sDot1qTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device has
forwarding and/or filtering information."
::= { sDot1qTpFdbEntry 1 }
sDot1qTpFdbPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g. in the dot1qStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned even for addresses
for which the corresponding value of dot1qTpFdbStatus is
not learned(3)."
::= { sDot1qTpFdbEntry 2 }
sDot1qTpFdbStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of dot1qTpFdbPort, nor an
entry in the dot1qStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
dot1qTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of dot1qTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
dot1qTpFdbAddress represents one of the device's
addresses. The corresponding instance of
dot1qTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
dot1qTpFdbAddress is also the value of an
existing instance of dot1qStaticAddress."
::= { sDot1qTpFdbEntry 3 }
sDot1qForwardUnregisteredTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qForwardUnregisteredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which there is no
more specific forwarding information applies. This is
configured statically by management and determined
dynamically by GMRP. An entry appears in this table for
all VLANs that are currently instantiated."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
::= { sDot1qTp 5 }
sDot1qForwardUnregisteredEntry OBJECT-TYPE
SYNTAX SwapiDot1qForwardUnregisteredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynamically by GMRP."
INDEX { sDot1qVlanIndex }
::= { sDot1qForwardUnregisteredTable 1 }
SwapiDot1qForwardUnregisteredEntry ::=
SEQUENCE {
sDot1qForwardUnregisteredPorts
PortList
}
sDot1qForwardUnregisteredPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The complete set of ports in this VLAN to which
multicast group-addressed frames for which there is no
more specific forwarding information will be forwarded.
This includes ports for which this need has been
determined dynamically by GMRP, or configured statically
by management."
::= { sDot1qForwardUnregisteredEntry 1 }
--
-- sDot1qStatic Group
--
-- -------------------------------------------------------------
-- The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------
sDot1qStaticUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qStaticUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7,
ISO/IEC 15802-3 Section 7.9.1"
::= { sDot1qStatic 1 }
sDot1qStaticUnicastEntry OBJECT-TYPE
SYNTAX SwapiDot1qStaticUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded."
INDEX {
sDot1qFdbId,
sDot1qStaticUnicastAddress,
sDot1qStaticUnicastReceivePort
}
::= { sDot1qStaticUnicastTable 1 }
SwapiDot1qStaticUnicastEntry ::=
SEQUENCE {
sDot1qStaticUnicastAddress
MacAddress,
sDot1qStaticUnicastReceivePort
INTEGER,
sDot1qStaticUnicastAllowedToGoTo
PortList
}
sDot1qStaticUnicastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a unicast address."
::= { sDot1qStaticUnicastEntry 1 }
sDot1qStaticUnicastReceivePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry."
::= { sDot1qStaticUnicastEntry 2 }
sDot1qStaticUnicastAllowedToGoTo OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports for which a frame with a specific
unicast address will be flooded in the event that it
has not been learned. It also specifies the set of
ports a specific unicast address may be dynamically
learnt on. The dot1qTpFdbTable will have an equivalent
entry with a dot1qTpFdbPort value of '0' until this
address has been learnt, when it will be updated with
the port the address has been seen on. This only
applies to ports that are members of the VLAN, defined
by dot1qVlanCurrentEgressPorts. The default value of
this object is a string of ones of appropriate length."
REFERENCE
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
::= { sDot1qStaticUnicastEntry 3 }
sDot1qStaticMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qStaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table as the port
number from which frames with a specific destination
address are received, is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7,
ISO/IEC 15802-3 Section 7.9.1"
::= { sDot1qStatic 2 }
sDot1qStaticMulticastEntry OBJECT-TYPE
SYNTAX SwapiDot1qStaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded."
INDEX {
sDot1qVlanIndex,
sDot1qStaticMulticastAddress,
sDot1qStaticMulticastReceivePort
}
::= { sDot1qStaticMulticastTable 1 }
SwapiDot1qStaticMulticastEntry ::=
SEQUENCE {
sDot1qStaticMulticastAddress
MacAddress,
sDot1qStaticMulticastReceivePort
INTEGER,
sDot1qStaticMulticastStaticEgressPorts
PortList,
sDot1qStaticMulticastStatus
INTEGER
}
sDot1qStaticMulticastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address."
::= { sDot1qStaticMulticastEntry 1 }
sDot1qStaticMulticastReceivePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry."
::= { sDot1qStaticMulticastEntry 2 }
sDot1qStaticMulticastStaticEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length."
::= { sDot1qStaticMulticastEntry 3 }
sDot1qStaticMulticastStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
permanent(3),
deleteOnReset(4),
deleteOnTimeout(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out."
DEFVAL { permanent }
::= { sDot1qStaticMulticastEntry 5 }
-- -------------------------------------------------------------
-- The Current VLAN Database
-- -------------------------------------------------------------
sDot1qVlanCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qVlanCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received."
::= { sDot1qVlan 2 }
sDot1qVlanCurrentEntry OBJECT-TYPE
SYNTAX SwapiDot1qVlanCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received."
INDEX { sDot1qVlanTimeMark, sDot1qVlanIndex }
::= { sDot1qVlanCurrentTable 1 }
SwapiDot1qVlanCurrentEntry ::=
SEQUENCE {
sDot1qVlanTimeMark
TimeFilter,
sDot1qVlanIndex
VlanIndex,
sDot1qVlanFdbId
Unsigned32,
sDot1qVlanCurrentEgressPorts
PortList,
sDot1qVlanCurrentUntaggedPorts
PortList
}
sDot1qVlanTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter
textual convention to see how this works."
::= { sDot1qVlanCurrentEntry 1 }
sDot1qVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier refering to this VLAN."
::= { sDot1qVlanCurrentEntry 2 }
sDot1qVlanFdbId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Filtering Database used by this VLAN. This is one
of the dot1qFdbId values in the sDot1qFdbTable. This
value is allocated automatically by the device whenever
the VLAN is created: either dynamically by GVRP, or by
management, in dot1qVlanStaticTable. Allocation of this
value follows the learning constraints defined for this
VLAN in dot1qLearningConstraintsTable."
::= { sDot1qVlanCurrentEntry 3 }
sDot1qVlanCurrentEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are transmitting traffic for
this VLAN as either tagged or untagged frames."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { sDot1qVlanCurrentEntry 4 }
sDot1qVlanCurrentUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are transmitting traffic for
this VLAN as untagged frames."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { sDot1qVlanCurrentEntry 5 }
-- -------------------------------------------------------------
-- The Static VLAN Database
-- -------------------------------------------------------------
sDot1qVlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { sDot1qVlan 3 }
sDot1qVlanStaticEntry OBJECT-TYPE
SYNTAX SwapiDot1qVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
INDEX { sDot1qVlanIndex }
::= { sDot1qVlanStaticTable 1 }
SwapiDot1qVlanStaticEntry ::=
SEQUENCE {
sDot1qVlanStaticEgressPorts
PortList,
sDot1qVlanStaticUntaggedPorts
PortList,
sDot1qVlanStaticRowStatus
RowStatus
}
sDot1qVlanStaticEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in sDot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { sDot1qVlanStaticEntry 2 }
sDot1qVlanStaticUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (sDot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { sDot1qVlanStaticEntry 4 }
sDot1qVlanStaticRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { sDot1qVlanStaticEntry 5 }
-- -------------------------------------------------------------
-- The VLAN Port Configuration Table
-- -------------------------------------------------------------
sDot1qPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot1qPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port control and status
information for VLAN configuration in the device."
::= { sDot1qVlan 5 }
sDot1qPortVlanEntry OBJECT-TYPE
SYNTAX SwapiDot1qPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling VLAN configuration for a port
on the device. This is indexed by sDot1dBasePort."
AUGMENTS { sDot1dBasePortEntry }
::= { sDot1qPortVlanTable 1 }
SwapiDot1qPortVlanEntry ::=
SEQUENCE {
sDot1qPvid
VlanIndex,
sDot1qPortAcceptableFrameTypes
INTEGER,
sDot1qPortIngressFiltering
TruthValue,
sDot1qPortGvrpStatus
EnabledStatus
}
sDot1qPvid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { 1:all }
The PVID, the VLAN ID assigned to untagged frames or
Prority-Tagged frames received on this port."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.1"
DEFVAL { 1 }
::= { sDot1qPortVlanEntry 1 }
sDot1qPortAcceptableFrameTypes OBJECT-TYPE
SYNTAX INTEGER {
admitAll(1),
admitOnlyVlanTagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { 1:all }
When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Prority-Tagged frames received on this port
will be accepted and assigned to the PVID for this port.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.3"
DEFVAL { admitAll }
::= { sDot1qPortVlanEntry 2 }
sDot1qPortIngressFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DURABLE: { 2:all }
When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.4"
DEFVAL { false }
::= { sDot1qPortVlanEntry 3 }
sDot1qPortGvrpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port."
DEFVAL { enabled }
::= { sDot1qPortVlanEntry 4 }
--
-- sRFC1643 Group
--
sDot3StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiDot3StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for a collection of ethernet-like
interfaces attached to a particular system."
::= { sRFC1643Dot3 2 }
sDot3StatsEntry OBJECT-TYPE
SYNTAX SwapiDot3StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for a particular interface to an
ethernet-like medium."
INDEX { sDot3StatsIndex }
::= { sDot3StatsTable 1 }
SwapiDot3StatsEntry ::= SEQUENCE {
sDot3StatsIndex INTEGER,
sDot3StatsAlignmentErrors Counter32,
sDot3StatsFCSErrors Counter32,
sDot3StatsSingleCollisionFrames Counter32,
sDot3StatsMultipleCollisionFrames Counter32,
sDot3StatsSQETestErrors Counter32,
sDot3StatsDeferredTransmissions Counter32,
sDot3StatsLateCollisions Counter32,
sDot3StatsExcessiveCollisions Counter32,
sDot3StatsInternalMacTransmitErrors Counter32,
sDot3StatsCarrierSenseErrors Counter32,
sDot3StatsFrameTooLongs Counter32,
sDot3StatsInternalMacReceiveErrors Counter32,
sDot3StatsEtherChipSet OBJECT IDENTIFIER,
sDot3StatsSymbolErrors Counter32,
sDot3StatsDuplexStatus INTEGER
}
sDot3StatsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies an
interface to an ethernet-like medium. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex."
::= { sDot3StatsEntry 1 }
sDot3StatsAlignmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 2 }
sDot3StatsFCSErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 3 }
sDot3StatsSingleCollisionFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by exactly one collision.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the sDot3StatsMultipleCollisionFrames
object."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 4 }
sDot3StatsMultipleCollisionFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the sDot3StatsSingleCollisionFrames
object."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 5 }
sDot3StatsSQETestErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
message is defined in section 7.2.2.2.4 of
ANSI/IEEE 802.3-1985 and its generation is
described in section 7.2.4.6 of the same
document."
REFERENCE
"ANSI/IEEE Std 802.3-1985 Carrier Sense
Multiple Access with Collision Detection Access
Method and Physical Layer Specifications"
::= { sDot3StatsEntry 6 }
sDot3StatsDeferredTransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 7 }
sDot3StatsLateCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a collision is
detected on a particular interface later than
512 bit-times into the transmission of a
packet.
Five hundred and twelve bit-times corresponds
to 51.2 microseconds on a 10 Mbit/s system. A
(late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 8 }
sDot3StatsExcessiveCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which transmission on a
particular interface fails due to excessive
collisions."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 9 }
sDot3StatsInternalMacTransmitErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the sDot3StatsLateCollisions object, the
sDot3StatsExcessiveCollisions object, or the
sDot3StatsCarrierSenseErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of transmission
errors on a particular interface that are not
otherwise counted."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 10 }
sDot3StatsCarrierSenseErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
interface.
The count represented by an instance of this
object is incremented at most once per
transmission attempt, even if the carrier sense
condition fluctuates during a transmission
attempt."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 11 }
-- { sDot3StatsEntry 12 } is not assigned
sDot3StatsFrameTooLongs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 13 }
-- { sDot3StatsEntry 14 } is not assigned
-- { sDot3StatsEntry 15 } is not assigned
sDot3StatsInternalMacReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the sDot3StatsFrameTooLongs object, the
sDot3StatsAlignmentErrors object, or the
sDot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted."
REFERENCE
"IEEE 802.3 Layer Management"
::= { sDot3StatsEntry 16 }
sDot3StatsEtherChipSet OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an OBJECT IDENTIFIER
which identifies the chipset used to
realize the interface. Ethernet-like
interfaces are typically built out of
several different chips. The MIB implementor
is presented with a decision of which chip
to identify via this object. The implementor
should identify the chip which is usually
called the Medium Access Control chip.
If no such chip is easily identifiable,
the implementor should identify the chip
which actually gathers the transmit
and receive statistics and error
indications. This would allow a
manager station to correlate the
statistics and the chip generating
them, giving it the ability to take
into account any known anomalies
in the chip."
::= { sDot3StatsEntry 17 }
sDot3StatsSymbolErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For an interface operating at 100 Mb/s, the
number of times there was an invalid data symbol
when a valid carrier was present.
For an interface operating in half-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than slotTime, and
during which there was at least one occurrence
of an event that causes the PHY to indicate
'Data reception error' or 'carrier extend error'
on the GMII.
For an interface operating in full-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle a carrier event) for a period
of time equal to or greater than minFrameSize,
and during which there was at least one
occurrence of an event that causes the PHY to
indicate 'Data reception error' on the GMII.
The count represented by an instance of this
object is incremented at most once per carrier
event, even if multiple symbol errors occur
during the carrier event. This count does
not increment if a collision is present.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE
"[IEEE 802.3 Std.], 30.3.2.1.5,
aSymbolErrorDuringCarrier."
::= { sDot3StatsEntry 18 }
sDot3StatsDuplexStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
halfDuplex(2),
fullDuplex(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined.
Management control of the duplex mode is
accomplished through the MAU MIB. When
an interface does not support autonegotiation,
or when autonegotiation is not enabled, the
duplex mode is controlled using
ifMauDefaultType. When autonegotiation is
supported and enabled, duplex mode is controlled
using ifMauAutoNegAdvertisedBits. In either
case, the currently operating duplex mode is
reflected both in this object and in ifMauType.
Note that this object provides redundant
information with ifMauType. Normally, redundant
objects are discouraged. However, in this
instance, it allows a management application to
determine the duplex status of an interface
without having to know every possible value of
ifMauType. This was felt to be sufficiently
valuable to justify the redundancy."
REFERENCE
"[IEEE 802.3 Std.], 30.3.1.1.32,
aDuplexStatus."
::= { sDot3StatsEntry 19 }
--
-- sArch Group
--
-- Needs to be replaced with the 64-bit counters
--
sSwitchStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwapiSwitchStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries. The number of
entries is given by the value of ifNumber."
::= { sSwitchStatsInfo 1 }
sSwitchStatsEntry OBJECT-TYPE
SYNTAX SwapiSwitchStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An interface entry containing objects at the
subnetwork layer and below for a particular
interface."
INDEX { sSwitchPortIndex }
::= { sSwitchStatsTable 1 }
SwapiSwitchStatsEntry ::=
SEQUENCE {
sSwitchPortIndex INTEGER,
sSwitchStatsTXOctetsNoErr Counter32,
sSwitchStatsTXPacketsNoErr Counter32,
sSwitchStatsRXOctetsNoErr Counter32,
sSwitchStatsRXPacketsNoErr Counter32
}
sSwitchPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, uses linear port number with holes."
::= { sSwitchStatsEntry 1 }
sSwitchStatsTXOctetsNoErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets transmitted from the interface. This
number does not include octets in error."
::= { sSwitchStatsEntry 2 }
sSwitchStatsTXPacketsNoErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted from the interface. This
number does not include packets in error."
::= { sSwitchStatsEntry 3 }
sSwitchStatsRXOctetsNoErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received on the interface. This
number does not include octets in error."
::= { sSwitchStatsEntry 4 }
sSwitchStatsRXPacketsNoErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on the interface. This
number does not include packets in error."
::= { sSwitchStatsEntry 5 }
-- ----------------------------------------------------------------
-- Conformance groups. This is required by SMIv2
-- ----------------------------------------------------------------
sMIBConformance OBJECT IDENTIFIER ::= { bcmSwapi 1 }
sMIBGroups OBJECT IDENTIFIER ::= { sMIBConformance 1 }
sMIBCompliances OBJECT IDENTIFIER ::= { sMIBConformance 2 }
sMIBDot1dGroup OBJECT-GROUP
OBJECTS {
sDot1dBasePort,
sDot1dBasePortMtuExceededDiscards,
sDot1dStpPort,
sDot1dStpPortState,
sDot1dStpPortEnable,
sDot1dTpLearnedEntryDiscards,
sDot1dTpAgingTime
}
STATUS current
DESCRIPTION
"Swapi dot1d support objects."
::= { sMIBGroups 3 }
sMIBRMONGroup OBJECT-GROUP
OBJECTS {
sEtherStatsIndex,
sEtherStatsDropEvents,
sEtherStatsOctets,
sEtherStatsPkts,
sEtherStatsBroadcastPkts,
sEtherStatsMulticastPkts,
sEtherStatsCRCAlignErrors,
sEtherStatsUndersizePkts,
sEtherStatsOversizePkts,
sEtherStatsFragments,
sEtherStatsJabbers,
sEtherStatsCollisions,
sEtherStatsPkts64Octets,
sEtherStatsPkts65to127Octets,
sEtherStatsPkts128to255Octets,
sEtherStatsPkts256to511Octets,
sEtherStatsPkts512to1023Octets,
sEtherStatsPkts1024to1518Octets,
sEtherStatsRXMACControlFrames,
sEtherStatsRXPauseMACCtrlFrames,
sEtherStatsTXPauseMACCtrlFrames,
sEtherStatsBcmIPMCBridgedPckts,
sEtherStatsBcmIPMCRoutedPckts,
sEtherStatsBcmIPMCInDroppedPckts,
sEtherStatsBcmIPMCOutDroppedPckts,
sEtherStatsIfInFrameRate,
sEtherStatsIfInOctetRate,
sEtherStatsIfOutFrameRate,
sEtherStatsIfOutOctetRate
}
STATUS current
DESCRIPTION
"Swapi RMON support objects."
::= { sMIBGroups 4 }
sMIBMauGroup OBJECT-GROUP
OBJECTS {
sIfMauIndex,
sIfMauType,
sIfMauMediaAvailable,
sIfMauJabberState,
sIfMauDefaultType,
sIfMauAutoNegAdminStatus,
sIfMauAutoNegRestart,
sIfMauAutoNegCapAdvertisedBits,
sIfMauAutoNegCapReceivedBits
}
STATUS current
DESCRIPTION
"Swapi MAU support objects."
::= { sMIBGroups 5 }
sMIBDot1pGroup OBJECT-GROUP
OBJECTS {
sDot1dDeviceCapabilities,
sDot1dTrafficClassesEnabled,
sDot1dGmrpStatus,
sDot1dPortCapabilities,
sDot1dPortDefaultUserPriority,
sDot1dPortNumTrafficClasses,
sDot1dRegenUserPriority,
sDot1dTrafficClass,
sDot1dPortOutboundAccessPriority,
sDot1dPortGmrpStatus
}
STATUS current
DESCRIPTION
"Swapi Dot1p dependent support objects."
::= { sMIBGroups 6 }
sMIBDot1QGroup OBJECT-GROUP
OBJECTS {
sDot1qGvrpStatus,
sDot1qFdbDynamicCount,
sDot1qStaticUnicastAllowedToGoTo,
sDot1qStaticMulticastStaticEgressPorts,
sDot1qStaticMulticastStatus,
sDot1qVlanFdbId,
sDot1qForwardUnregisteredPorts,
sDot1qVlanCurrentEgressPorts,
sDot1qVlanCurrentUntaggedPorts,
sDot1qVlanStaticEgressPorts,
sDot1qVlanStaticUntaggedPorts,
sDot1qVlanStaticRowStatus,
sDot1qPvid,
sDot1qPortAcceptableFrameTypes,
sDot1qPortIngressFiltering,
sDot1qPortGvrpStatus
}
STATUS current
DESCRIPTION
"Swapi Dot1Q dependent support objects."
::= { sMIBGroups 7 }
sMIBDot3Group OBJECT-GROUP
OBJECTS {
sDot3StatsIndex,
sDot3StatsAlignmentErrors,
sDot3StatsFCSErrors,
sDot3StatsSingleCollisionFrames,
sDot3StatsMultipleCollisionFrames,
sDot3StatsSQETestErrors,
sDot3StatsDeferredTransmissions,
sDot3StatsLateCollisions,
sDot3StatsExcessiveCollisions,
sDot3StatsInternalMacTransmitErrors,
sDot3StatsCarrierSenseErrors,
sDot3StatsFrameTooLongs,
sDot3StatsInternalMacReceiveErrors,
sDot3StatsEtherChipSet
}
STATUS current
DESCRIPTION
"Swapi RFC1643 dependent support objects."
::= { sMIBGroups 8 }
sMIBArchGroup OBJECT-GROUP
OBJECTS {
sSwitchPortIndex,
sSwitchStatsTXOctetsNoErr,
sSwitchStatsTXPacketsNoErr,
sSwitchStatsRXOctetsNoErr,
sSwitchStatsRXPacketsNoErr
}
STATUS current
DESCRIPTION
"Swapi architectural dependent support objects."
::= { sMIBGroups 9 }
sMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for s module."
MODULE
MANDATORY-GROUPS {
sMIBDot1dGroup,
sMIBRMONGroup,
sMIBMauGroup,
sMIBDot1pGroup,
sMIBDot1QGroup,
sMIBDot3Group,
sMIBArchGroup
}
::= { sMIBCompliances 1 }
END
Reference in New Issue View Git Blame Copy Permalink