8394 lines
174 KiB
Plaintext
8394 lines
174 KiB
Plaintext
|
|
|
|
GAMATRONIC-MIB DEFINITIONS ::= BEGIN
|
|
--Change for power max 1/1/2004
|
|
--Change new 15/8 TRAPS
|
|
--Changes New 20/11 Alarm Sevirity psStatus Changed from alarm1 to alarm96 and read write
|
|
--Changes New 20/11 Alarm set changed to alarm 1 to alarm 96
|
|
--Changes New 20/11 Add new mib SverityMap Maping alarm to severity
|
|
--Changes New 15/1 Spare commands for read and write
|
|
--Changes New 15/1 Dry Contactors new 2 tables for dry1 and dry 2 and add drystatus for enable disable as well
|
|
--Changes New 15/1 Alarm add more 64 alarms to the psStatus and to alarm set
|
|
--Changes New 15/1 Add spares in AC input , Batery General , DCoutput, psConf Nomonal
|
|
--Changes New 15/1 IDE spares in psUNIT
|
|
--changes 25/11 add No out share bit and bad sharing to INU
|
|
--changes 24/11 - DryIn Status
|
|
--changes 23/11 - NOMINALS
|
|
--Changes 21/11 - add eq run hours and Minutes to batgeneral
|
|
-- add No out spare bit badsharing to PSU
|
|
-- add invertor voltage in DC output
|
|
-- Add eq major and Minor read write to NOM and Invertor voltage
|
|
-- Add Commands Leds (bit structure ) and store and load user defaults
|
|
-- Changes from write to read only
|
|
--Changes 7/11 add leds and mbx version psCommandMBXSWRev psCommandLed
|
|
--changes 28/9 change in mibs new commands and change write to read
|
|
--changes 26/8 change userdefine command to be read write
|
|
--changes 24/8 add 5 userdefined commands
|
|
--changes 23/8 add psdrycontactstatus
|
|
-- Change 21/8 adding commans
|
|
--Changes 18/8 changes in commaand mib
|
|
--changes 21/7 - Add in statistics mib (end of the mib) first and last sequence number for each statistic table current available
|
|
-- Add in log mib (end of the mib) first and last of sequence available in log table
|
|
--changes 11/7 - add in psPSU - psPSUNotRespond
|
|
--add in psINU psINUNotRespond
|
|
--add in psCommands - option to get filename
|
|
-- change acInputOk to be read only
|
|
--changes 9/7 add date time in one integer for psLogDateTime
|
|
-- Changes: 22/6/2000
|
|
--- Change Alarm severity
|
|
--- Add IP Address for TRAP
|
|
-- Creation Date20/5/2000
|
|
-- Added new dry contactors
|
|
-- commands for tests and softwre down load
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
-- Integer32,
|
|
enterprises,IpAddress FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString
|
|
-- TruthValue, RowStatus, RowPointer, TimeInterval
|
|
FROM SNMPv2-TC;
|
|
-- MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
-- FROM SNMPv2-CONF;
|
|
|
|
|
|
gamatronicLTD MODULE-IDENTITY
|
|
LAST-UPDATED "0005150000Z"
|
|
ORGANIZATION " GAMATRONIC Ltd."
|
|
CONTACT-INFO
|
|
" Asher Avisar
|
|
Postal:
|
|
Tel: +972-2-588-8222
|
|
Fax: +972-2-582-8875
|
|
E-mail: aavissar@gamatronic.co.il"
|
|
|
|
DESCRIPTION
|
|
"This is the GAMATRONIC POWER SUPPLY PRIVATE MIB module"
|
|
-- REVISION "Version 1.0"
|
|
|
|
::= { enterprises 6050 }
|
|
|
|
psMIB OBJECT IDENTIFIER ::= { gamatronicLTD 1 }
|
|
|
|
--
|
|
-- The MIB module consist of the following groups:
|
|
-- (1) UNIT
|
|
-- (2) Battery
|
|
-- (3) Power Supply
|
|
-- (4) INE
|
|
-- (5) AC Input
|
|
-- (6) DC Output
|
|
-- (7) Contactors
|
|
-- (8) Set UP
|
|
-- (9) Status
|
|
-- (10) Log
|
|
-- (11) Trap
|
|
-- (12) Alarm Set
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
-- PS Textual Convention
|
|
-- PS DateTime Textual Convention
|
|
|
|
-- Alarm Severity Identifier Textual Convention
|
|
|
|
PsAlarmSeverity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the severity of an alarm, including 'cleared'."
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
warning(4)
|
|
}
|
|
|
|
|
|
|
|
--
|
|
-- PS's MIB
|
|
--
|
|
|
|
psUnit OBJECT IDENTIFIER ::= { psMIB 1 }
|
|
|
|
psBattery OBJECT IDENTIFIER ::= { psMIB 2 }
|
|
psPSU OBJECT IDENTIFIER ::= { psMIB 3 }
|
|
psINU OBJECT IDENTIFIER ::= { psMIB 4 }
|
|
|
|
|
|
psACInput OBJECT IDENTIFIER ::= { psMIB 5}
|
|
|
|
psDCOutput OBJECT IDENTIFIER ::= { psMIB 6}
|
|
|
|
psContuctor OBJECT IDENTIFIER ::= { psMIB 7}
|
|
|
|
psConfNominal OBJECT IDENTIFIER ::= { psMIB 8}
|
|
|
|
psStatus OBJECT IDENTIFIER ::= { psMIB 9}
|
|
psStatistics OBJECT IDENTIFIER ::= { psMIB 10}
|
|
psLog OBJECT IDENTIFIER ::= { psMIB 11}
|
|
psTrap OBJECT IDENTIFIER ::= { psMIB 12}
|
|
psAlarmSet OBJECT IDENTIFIER ::= { psMIB 13}
|
|
psSecurity OBJECT IDENTIFIER ::= { psMIB 14}
|
|
psCommand OBJECT IDENTIFIER ::= {psMIB 15}
|
|
psSeverityMap OBJECT IDENTIFIER ::= {psMIB 16 }
|
|
psSpare OBJECT IDENTIFIER ::= {psMIB 17}
|
|
psDial OBJECT IDENTIFIER ::= {psMIB 18}
|
|
psPowerPlus OBJECT IDENTIFIER ::= {psMIB 19}
|
|
|
|
-- The Battery group consists of the following objects:
|
|
|
|
--
|
|
-- Battery MIB definitions
|
|
--
|
|
|
|
psBatteryNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of Battery supported "
|
|
::= { psBattery 1 }
|
|
psBatteryVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Battery Voltage present in 0.1V "
|
|
::= { psBattery 2 }
|
|
|
|
psBatteryTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (0),
|
|
off (1)
|
|
|
|
}
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Test status of the battery. Automatically set to 0 when test is completed."
|
|
::= { psBattery 3 }
|
|
|
|
psBatteryNominalCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Nominal Capacity."
|
|
::= { psBattery 4 }
|
|
|
|
psBatteryActualCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Actual Capacity."
|
|
::= { psBattery 5 }
|
|
|
|
psBatteryTestTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Test time in seconds ."
|
|
::= { psBattery 6 }
|
|
|
|
psBatteryLoadTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Load time in seconds ."
|
|
::= { psBattery 7 }
|
|
|
|
psBatteryNearestTestMonth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery nearest Test time - Month ."
|
|
::= { psBattery 8 }
|
|
psBatteryNearestTestDay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery nearest Test time - Day ."
|
|
::= { psBattery 9 }
|
|
|
|
psBatteryNearestTestHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery nearest Test time - Hour."
|
|
::= { psBattery 10 }
|
|
psBatteryNearestTestMinute OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery nearest Test time - Minute ."
|
|
::= { psBattery 11 }
|
|
psBatteryChargeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
floating(0),
|
|
equalizes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Charge mode 0 = Floating 1 = Equalized "
|
|
::= { psBattery 12 }
|
|
|
|
psBatteryEqRunTimeHours OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equalizer Run Time Hours "
|
|
::= { psBattery 13 }
|
|
|
|
psBatteryEqRunTimeMinutes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equalizer Run Time Minutes "
|
|
::= { psBattery 14 }
|
|
|
|
psBatterySpareRead1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 15 }
|
|
psBatterySpareRead2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 16 }
|
|
psBatterySpareRead3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 17 }
|
|
psBatterySpareWrite1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 18 }
|
|
psBatterySpareWrite2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 19 }
|
|
psBatterySpareWrite3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 20 }
|
|
psBatterySpareWrite4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 21 }
|
|
psBatterySpareWrite5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 22 }
|
|
psBatterySpareWrite6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 23 }
|
|
psBatterySpareWrite7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 24 }
|
|
|
|
psBatterySpareWrite8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psBattery 25 }
|
|
|
|
|
|
psBatteryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsBatteryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Battery Information table."
|
|
::= { psBattery 26 }
|
|
|
|
psBatteryEntry OBJECT-TYPE
|
|
SYNTAX PsBatteryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines for each Information for each PS. The entry is indexed by the psBatteryIndex. "
|
|
INDEX { psBatteryIndex }
|
|
::= { psBatteryTable 1 }
|
|
|
|
PsBatteryEntry ::= SEQUENCE {
|
|
psBatteryIndex INTEGER,
|
|
psBatteryCurrentDirection INTEGER,
|
|
psBatteryCurrent INTEGER,
|
|
psBatteryTemperatureSign INTEGER,
|
|
psBatteryTemperature INTEGER,
|
|
psBatteryStatus INTEGER,
|
|
psBatteryFuseStatus INTEGER,
|
|
psBatteryInstalationYear INTEGER,
|
|
psBatteryInstalationMonth INTEGER,
|
|
psBatteryInstalationDay INTEGER
|
|
|
|
}
|
|
|
|
psBatteryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The PS table index."
|
|
::= { psBatteryEntry 1 }
|
|
|
|
|
|
|
|
|
|
|
|
psBatteryCurrentDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Battery current Direction. 0= Charge. "
|
|
::= { psBatteryEntry 2 }
|
|
|
|
|
|
psBatteryCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Battery Current presents in units of 0.1A . "
|
|
::= { psBatteryEntry 3 }
|
|
|
|
|
|
psBatteryTemperatureSign OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
positive(0),
|
|
negative(1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Battery Sign of the Temerature- Positive = 0 Negative = 1."
|
|
::= { psBatteryEntry 4 }
|
|
|
|
|
|
psBatteryTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Battery Temperature giving in Celsius. "
|
|
::= { psBatteryEntry 5 }
|
|
|
|
|
|
psBatteryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passed(0),
|
|
failed (1),
|
|
low(2)
|
|
}
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Status of the Battery 0 = Passed, 1 = Failed 2 = Low."
|
|
::= { psBatteryEntry 6 }
|
|
|
|
|
|
psBatteryFuseStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(0),
|
|
bad(1)
|
|
|
|
}
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The status of the battery fuse. 0 = OK, 1 = BAD."
|
|
::= { psBatteryEntry 7 }
|
|
|
|
|
|
|
|
psBatteryInstalationYear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Installation date -Year ."
|
|
::= { psBatteryEntry 8 }
|
|
|
|
psBatteryInstalationMonth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Installation date -Month ."
|
|
::= { psBatteryEntry 9 }
|
|
|
|
psBatteryInstalationDay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Battery Installation date -Day ."
|
|
::= { psBatteryEntry 10 }
|
|
|
|
|
|
-- The Power Supply group consists of the following objects:
|
|
|
|
--
|
|
-- Power Supply MIB definitions
|
|
--
|
|
|
|
psPSUNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of Power Supplies supported "
|
|
::= { psPSU 1 }
|
|
|
|
psPSUTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsPSUEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Power Supply Information table."
|
|
::= { psPSU 2 }
|
|
|
|
psPSUEntry OBJECT-TYPE
|
|
SYNTAX PsPSUEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines for each Information for each PS. The entry is indexed by the psPSUIndex. "
|
|
INDEX { psPSUIndex }
|
|
::= { psPSUTable 1 }
|
|
|
|
PsPSUEntry ::= SEQUENCE {
|
|
psPSUIndex INTEGER,
|
|
psPSUVoltage INTEGER,
|
|
psPSUCurrent INTEGER,
|
|
psPSUTemperature INTEGER,
|
|
psPSUActivity INTEGER,
|
|
psPSUPsType INTEGER,
|
|
psPSUStatus INTEGER,
|
|
psPSUPsOK INTEGER,
|
|
psPSUNotRespond INTEGER,
|
|
psPSUNOOut INTEGER,
|
|
psPSUPSpareBit INTEGER,
|
|
psPSUBadSharing INTEGER,
|
|
psPSUReserve1 INTEGER,
|
|
psPSUReserve2 INTEGER,
|
|
psPSUReserve3 INTEGER,
|
|
psPSUShutInstruction INTEGER,
|
|
psPSUTestStatus INTEGER,
|
|
psPSUCurrentLimitDecreased INTEGER,
|
|
psPSUACInputOK INTEGER,
|
|
psPSUSelfTestPass INTEGER,
|
|
psPSUCurrentLimitExceed INTEGER,
|
|
psPSUShutHighTemp INTEGER,
|
|
psPSUShutHighVolt INTEGER,
|
|
psPSURemoteMode INTEGER,
|
|
psPSUFloatingMode INTEGER,
|
|
psPSUEqualizeMode INTEGER,
|
|
psPSUFanStataus INTEGER,
|
|
psPSUIndication INTEGER
|
|
|
|
}
|
|
|
|
psPSUIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The PSU table index."
|
|
::= { psPSUEntry 1 }
|
|
|
|
|
|
psPSUVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSU Voltage present in 0.1V "
|
|
::= { psPSUEntry 2 }
|
|
|
|
|
|
|
|
|
|
|
|
psPSUCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSU Current presents in units of 0.1A . "
|
|
::= { psPSUEntry 3 }
|
|
|
|
|
|
|
|
psPSUTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSU Temperature giving in Celsius. "
|
|
::= { psPSUEntry 4 }
|
|
|
|
psPSUActivity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (0),
|
|
on (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSU Activity 0 = off 1= on "
|
|
::= { psPSUEntry 5 }
|
|
|
|
psPSUPsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSU TYPE
|
|
|
|
01 - HPSu24-100 24V 100A
|
|
02 - HPSu50-50 50V 50A Vertical Construction
|
|
03 - HPSu50-50 50V 50A Horizontal Construction
|
|
04 - HPSu50-75 50V 75A Vertical Construction
|
|
05 - HPSu50-16 50V 16A Regular
|
|
06 HPSu50-16U 50V 16A Universal "
|
|
::= { psPSUEntry 6 }
|
|
|
|
psPSUStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS STATUS The next are bits taken from this status "
|
|
|
|
::= { psPSUEntry 7 }
|
|
|
|
|
|
psPSUPsOK OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok(1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ps Ok status "
|
|
::= { psPSUEntry 8 }
|
|
|
|
|
|
psPSUNotRespond OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
bad(1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSU Not Responding
|
|
"
|
|
::= { psPSUEntry 9 }
|
|
|
|
|
|
psPSUNOOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS No Out "
|
|
|
|
::= { psPSUEntry 10}
|
|
|
|
psPSUPSpareBit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS Spare Bits "
|
|
|
|
::= { psPSUEntry 11}
|
|
|
|
|
|
psPSUBadSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS Bad Sharing "
|
|
::= { psPSUEntry 12}
|
|
|
|
|
|
psPSUReserve1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" RESERVE "
|
|
::= { psPSUEntry 13}
|
|
|
|
psPSUReserve2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" RESERVE "
|
|
::= { psPSUEntry 14}
|
|
|
|
psPSUReserve3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" RESERVE "
|
|
::= { psPSUEntry 15}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
psPSUShutInstruction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shut by instruction status "
|
|
|
|
::= { psPSUEntry 16 }
|
|
|
|
psPSUTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notintest (0),
|
|
inprogress (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Test In progress status 0= not in progress 1 = test in progress "
|
|
|
|
::= { psPSUEntry 17 }
|
|
psPSUCurrentLimitDecreased OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Is Current limit decreased due to temperature "
|
|
|
|
::= { psPSUEntry 18 }
|
|
|
|
psPSUACInputOK OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Input status"
|
|
|
|
::= { psPSUEntry 19 }
|
|
|
|
psPSUSelfTestPass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Self Test status "
|
|
|
|
::= { psPSUEntry 20 }
|
|
|
|
psPSUCurrentLimitExceed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Current limit excedded"
|
|
|
|
::= { psPSUEntry 21 }
|
|
|
|
|
|
psPSUShutHighTemp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shut down high temperature"
|
|
|
|
::= { psPSUEntry 22 }
|
|
|
|
|
|
psPSUShutHighVolt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shut down high Voltage"
|
|
|
|
::= { psPSUEntry 23 }
|
|
psPSURemoteMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS in Remote Mode"
|
|
|
|
::= { psPSUEntry 24 }
|
|
psPSUFloatingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS in Floating Mode"
|
|
|
|
::= { psPSUEntry 25 }
|
|
|
|
|
|
psPSUEqualizeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS in EqualizeMode"
|
|
|
|
::= { psPSUEntry 26 }
|
|
psPSUFanStataus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
bad (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS FAN STATUS"
|
|
|
|
::= { psPSUEntry 27 }
|
|
|
|
psPSUIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pscurrent (0),
|
|
voltage (1),
|
|
temperature (3)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS in EqualizeMode"
|
|
|
|
::= { psPSUEntry 28 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- The Inverted group consists of the following objects:
|
|
|
|
--
|
|
-- Inverted Unit MIB definitions
|
|
--
|
|
|
|
psINUNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of Power Supplies supported "
|
|
::= { psINU 1 }
|
|
|
|
psINUTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsINUEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Power Supply Information table."
|
|
::= { psINU 2 }
|
|
|
|
psINUEntry OBJECT-TYPE
|
|
SYNTAX PsINUEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines for each Information for each PS. The entry is indexed by the psINUIndex. "
|
|
INDEX { psINUIndex }
|
|
::= { psINUTable 1 }
|
|
|
|
PsINUEntry ::= SEQUENCE {
|
|
psINUIndex INTEGER,
|
|
psINUVoltage INTEGER,
|
|
psINUCurrent INTEGER,
|
|
psINUTemperature INTEGER,
|
|
psINUActivity INTEGER,
|
|
psINUPsType INTEGER,
|
|
psINUStatus INTEGER,
|
|
psINUPsOK INTEGER,
|
|
psINUNotRespond INTEGER,
|
|
psINUNOOut INTEGER,
|
|
psINUPSpareBit INTEGER,
|
|
psINUBadSharing INTEGER,
|
|
psINUReserve1 INTEGER,
|
|
psINUReserve2 INTEGER,
|
|
psINUReserve3 INTEGER,
|
|
psINUShutInstruction INTEGER,
|
|
psINUReserve7 INTEGER,
|
|
psINUCurrentLimitDecreased INTEGER,
|
|
psINUReserve8 INTEGER,
|
|
psINUSelfTestPass INTEGER,
|
|
psINUCurrentLimitExceed INTEGER,
|
|
psINUShutHighTemp INTEGER,
|
|
psINUShutHighVolt INTEGER,
|
|
psINURemoteMode INTEGER,
|
|
psINUReserve9 INTEGER,
|
|
psINUReserve10 INTEGER,
|
|
psINUFanStataus INTEGER,
|
|
psINUIndication INTEGER
|
|
|
|
}
|
|
|
|
psINUIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The INU table index."
|
|
::= { psINUEntry 1 }
|
|
|
|
|
|
psINUVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INU Voltage present in 0.1V "
|
|
::= { psINUEntry 2 }
|
|
|
|
|
|
|
|
|
|
|
|
psINUCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INU Current presents in units of 0.1A . "
|
|
::= { psINUEntry 3 }
|
|
|
|
|
|
|
|
psINUTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INU Temperature giving in Celsius. "
|
|
::= { psINUEntry 4 }
|
|
|
|
psINUActivity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (0),
|
|
on (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INU Activity 0 = off 1= on "
|
|
::= { psINUEntry 5 }
|
|
|
|
|
|
|
|
psINUPsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INU TYPE
|
|
|
|
0xA0 HPSu50-50 - H
|
|
0x91 HPSu50-16U
|
|
0x90 HPSu50-16
|
|
0x85 INV50-24
|
|
0x84 HPSu50-42
|
|
0x83 HPSu50-100
|
|
0x82 HPSu50-75
|
|
0x81 HPSu50-50
|
|
0x80 HPSu24-100
|
|
|
|
|
|
"
|
|
::= { psINUEntry 6 }
|
|
psINUStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS STATUS The next are bits taken from this status "
|
|
|
|
::= { psINUEntry 7 }
|
|
|
|
|
|
psINUPsOK OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok(1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ps Ok status "
|
|
::= { psINUEntry 8 }
|
|
|
|
|
|
psINUNotRespond OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
bad(1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INU Not Responding
|
|
"
|
|
::= { psINUEntry 9 }
|
|
|
|
|
|
psINUNOOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" INU No Out "
|
|
|
|
::= { psINUEntry 10}
|
|
|
|
psINUPSpareBit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" INUSpare Bits "
|
|
|
|
::= { psINUEntry 11}
|
|
|
|
|
|
psINUBadSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" INU Bad Sharing "
|
|
::= { psINUEntry 12}
|
|
psINUReserve1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" RESERVE "
|
|
::= { psINUEntry 13}
|
|
|
|
psINUReserve2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" RESERVE "
|
|
::= { psINUEntry 14}
|
|
|
|
psINUReserve3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" RESERVE "
|
|
::= { psINUEntry 15}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
psINUShutInstruction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shut by instruction status "
|
|
|
|
::= { psINUEntry 16 }
|
|
|
|
psINUReserve7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psINUEntry 17 }
|
|
psINUCurrentLimitDecreased OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Is Current limit decreased due to temperature "
|
|
|
|
::= { psINUEntry 18 }
|
|
|
|
psINUReserve8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
|
|
::= { psINUEntry 19 }
|
|
|
|
psINUSelfTestPass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Self Test status "
|
|
|
|
::= { psINUEntry 20 }
|
|
|
|
psINUCurrentLimitExceed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Current limit excedded"
|
|
|
|
::= { psINUEntry 21 }
|
|
|
|
|
|
psINUShutHighTemp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shut down high temperature"
|
|
|
|
::= { psINUEntry 22 }
|
|
|
|
|
|
psINUShutHighVolt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shut down high Voltage"
|
|
|
|
::= { psINUEntry 23 }
|
|
psINURemoteMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS in Remote Mode"
|
|
|
|
::= { psINUEntry 24 }
|
|
psINUReserve9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psINUEntry 25 }
|
|
|
|
|
|
psINUReserve10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psINUEntry 26 }
|
|
psINUFanStataus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
bad (1)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS FAN STATUS"
|
|
|
|
::= { psINUEntry 27 }
|
|
|
|
psINUIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pscurrent (0),
|
|
voltage (1),
|
|
temperature (3)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PS in EqualizeMode"
|
|
|
|
::= { psINUEntry 28 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- The AC INPUT group consists of the following objects:
|
|
|
|
--
|
|
-- AC INPUT MIB definitions
|
|
--
|
|
|
|
psACInputVoltage1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Voltage present in 0.1V "
|
|
::= { psACInput 1 }
|
|
|
|
psACInputVoltage2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Voltage present in 0.1V "
|
|
::= { psACInput 2 }
|
|
|
|
psACInputVoltage3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Voltage present in 0.1V "
|
|
::= { psACInput 3 }
|
|
|
|
|
|
psACInputCurrent1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Current presents in units of 0.1A . "
|
|
::= { psACInput 4 }
|
|
|
|
psACInputCurrent2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Current presents in units of 0.1A . "
|
|
::= { psACInput 5 }
|
|
|
|
psACInputCurrent3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Current presents in units of 0.1A . "
|
|
::= { psACInput 6 }
|
|
|
|
|
|
|
|
|
|
|
|
psACInputFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput Frequency giving in 0.01HZ. "
|
|
::= { psACInput 7 }
|
|
|
|
psACInputACStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACInput AC Status 0 = OK 1= Not OK "
|
|
::= { psACInput 8 }
|
|
|
|
psACInputSurgeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
notok (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Status of the ACInput Surge 0 = OK, 1 = Not OK."
|
|
::= { psACInput 9 }
|
|
|
|
|
|
psACInputSpareInp0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 10 }
|
|
psACInputSpareInp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 11 }
|
|
|
|
|
|
psACInputSpareInp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 12 }
|
|
|
|
psACInputSpareInp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 14 }
|
|
|
|
psACInputSpareInp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 15 }
|
|
|
|
psACInputSpareInp5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 16 }
|
|
|
|
psACInputSpareInp6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare"
|
|
::= { psACInput 17 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- The DC OUTPUT group consists of the following objects:
|
|
|
|
--
|
|
-- DC OUTPUT MIB definitions
|
|
--
|
|
|
|
|
|
|
|
psDCoutputVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Voltage present in 0.1V "
|
|
::= { psDCOutput 1 }
|
|
|
|
|
|
|
|
psDCoutputCurrent1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Current presents in units of 0.1A . "
|
|
::= { psDCOutput 2 }
|
|
|
|
psDCoutputCurrent2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Current presents in units of 0.1A . "
|
|
::= { psDCOutput 3 }
|
|
|
|
psDCoutputCurrent3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Current presents in units of 0.1A . "
|
|
::= { psDCOutput 4 }
|
|
|
|
psDCoutputCurrent4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Current presents in units of 0.1A . "
|
|
::= { psDCOutput 5 }
|
|
|
|
psDCoutputCurrent5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Current presents in units of 0.1A . "
|
|
::= { psDCOutput 6 }
|
|
|
|
|
|
|
|
psDCoutputDCStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (0),
|
|
overvoltage (1),
|
|
undervoltage (2),
|
|
disconnected (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput DC Status 0 = OK 1= OverVoltage 2 = UnderVoltage 3 = Disconnected "
|
|
::= { psDCOutput 11 }
|
|
|
|
psDCoutputSurgeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(0),
|
|
notok (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Status of the DCoutput Surge 0 = OK, 1 = Not OK."
|
|
::= { psDCOutput 12}
|
|
|
|
psDCoutputInvertorVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Invertor Voltage present in 0.1V "
|
|
::= { psDCOutput 13 }
|
|
|
|
psDCOutputDCOutput OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ok(0),
|
|
overvoltage(1),
|
|
undervoltage(2),
|
|
disconnect (3)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
" 0=OK
|
|
1= OverVoltage
|
|
2 = Undervoltage.
|
|
3 = Disconnected."
|
|
::= { psDCOutput 14}
|
|
|
|
psDCoutputSpare1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Spare "
|
|
::= { psDCOutput 15 }
|
|
|
|
psDCoutputSpare2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Spare "
|
|
::= { psDCOutput 16 }
|
|
|
|
psDCoutputSpare3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Spare "
|
|
::= { psDCOutput 17 }
|
|
psDCoutputSpare4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Spare "
|
|
::= { psDCOutput 18 }
|
|
psDCoutputSpare5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Spare "
|
|
::= { psDCOutput 19}
|
|
|
|
|
|
psDCoutputSpare6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DCoutput Spare "
|
|
::= { psDCOutput 20 }
|
|
|
|
|
|
-- The PS Contuctors and Dry Contacts group consists of the following objects:
|
|
|
|
--
|
|
-- Contuctors MIB definitions
|
|
--
|
|
|
|
psContuctor1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 1 in Battery Circuit "
|
|
::= { psContuctor 1 }
|
|
|
|
psContuctor2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 2 in Battery Circuit "
|
|
::= { psContuctor 2 }
|
|
|
|
psContuctor3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 3 in Battery Circuit "
|
|
::= { psContuctor 3 }
|
|
|
|
psContuctor4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 4 in Battery Circuit "
|
|
::= { psContuctor 4 }
|
|
|
|
psContuctor5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 5 in Load Circuit "
|
|
::= { psContuctor 5 }
|
|
|
|
psContuctor6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 6 in Load Circuit "
|
|
::= { psContuctor 6 }
|
|
|
|
psContuctor7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 7 in Load Circuit "
|
|
::= { psContuctor 7 }
|
|
|
|
psContuctor8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 8 in Load Circuit "
|
|
::= { psContuctor 8 }
|
|
|
|
psContuctor9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 9 in Load Circuit "
|
|
::= { psContuctor 9 }
|
|
psContuctor10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (0),
|
|
close (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Contuctor 10 in Load Circuit "
|
|
::= { psContuctor 10 }
|
|
|
|
psDryContactTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsDryContactorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Dry Contactor alarm table."
|
|
|
|
::= { psContuctor 11 }
|
|
|
|
|
|
psDryContactorEntry OBJECT-TYPE
|
|
SYNTAX PsDryContactorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"An entry in this table defines for each Dry Contactor the Alarm vector"
|
|
INDEX {psDryContactorIndex}
|
|
::= { psDryContactTable 1 }
|
|
|
|
PsDryContactorEntry ::= SEQUENCE {
|
|
psDryContactorIndex INTEGER,
|
|
psDryContactorAlarm1 INTEGER,
|
|
psDryContactorAlarm2 INTEGER,
|
|
psDryContactorAlarm3 INTEGER,
|
|
psDryContactorAlarm4 INTEGER,
|
|
psDryContactorAlarm5 INTEGER,
|
|
psDryContactorAlarm6 INTEGER,
|
|
psDryContactorAlarm7 INTEGER,
|
|
psDryContactorAlarm8 INTEGER,
|
|
psDryContactorAlarm9 INTEGER,
|
|
psDryContactorAlarm10 INTEGER,
|
|
psDryContactorAlarm11 INTEGER,
|
|
psDryContactorAlarm12 INTEGER,
|
|
psDryContactorAlarm13 INTEGER,
|
|
psDryContactorAlarm14 INTEGER,
|
|
psDryContactorAlarm15 INTEGER,
|
|
psDryContactorAlarm16 INTEGER,
|
|
psDryContactorAlarm17 INTEGER,
|
|
psDryContactorAlarm18 INTEGER,
|
|
psDryContactorAlarm19 INTEGER,
|
|
psDryContactorAlarm20 INTEGER,
|
|
psDryContactorAlarm21 INTEGER,
|
|
psDryContactorAlarm22 INTEGER,
|
|
psDryContactorAlarm23 INTEGER,
|
|
psDryContactorAlarm24 INTEGER,
|
|
psDryContactorAlarm25 INTEGER,
|
|
psDryContactorAlarm26 INTEGER,
|
|
psDryContactorAlarm27 INTEGER,
|
|
psDryContactorAlarm28 INTEGER,
|
|
psDryContactorAlarm29 INTEGER,
|
|
psDryContactorAlarm30 INTEGER,
|
|
psDryContactorAlarm31 INTEGER,
|
|
psDryContactorAlarm32 INTEGER
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
psDryContactorIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The DRY Contact table index."
|
|
::= { psDryContactorEntry 1 }
|
|
|
|
psDryContactorAlarm1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 1."
|
|
::= { psDryContactorEntry 2 }
|
|
|
|
|
|
psDryContactorAlarm2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 2."
|
|
::= { psDryContactorEntry 3 }
|
|
|
|
psDryContactorAlarm3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 3."
|
|
::= { psDryContactorEntry 4 }
|
|
psDryContactorAlarm4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 4."
|
|
::= { psDryContactorEntry 5 }
|
|
|
|
psDryContactorAlarm5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 5."
|
|
::= { psDryContactorEntry 6 }
|
|
psDryContactorAlarm6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 6."
|
|
::= { psDryContactorEntry 7}
|
|
|
|
|
|
|
|
|
|
psDryContactorAlarm7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 7."
|
|
::= { psDryContactorEntry 8 }
|
|
psDryContactorAlarm8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 8."
|
|
::= { psDryContactorEntry 9 }
|
|
|
|
psDryContactorAlarm9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 9."
|
|
::= { psDryContactorEntry 10}
|
|
|
|
|
|
|
|
psDryContactorAlarm10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 10."
|
|
::= { psDryContactorEntry 11}
|
|
psDryContactorAlarm11 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 11."
|
|
::= { psDryContactorEntry 12}
|
|
|
|
|
|
|
|
psDryContactorAlarm12 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 12."
|
|
::= { psDryContactorEntry 13 }
|
|
|
|
psDryContactorAlarm13 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 13."
|
|
::= { psDryContactorEntry 14}
|
|
|
|
|
|
psDryContactorAlarm14 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 14."
|
|
::= { psDryContactorEntry 15 }
|
|
|
|
psDryContactorAlarm15 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 15."
|
|
::= { psDryContactorEntry 16 }
|
|
psDryContactorAlarm16 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 16."
|
|
::= { psDryContactorEntry 17}
|
|
|
|
|
|
|
|
|
|
psDryContactorAlarm17 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 17."
|
|
::= { psDryContactorEntry 18 }
|
|
|
|
|
|
psDryContactorAlarm18 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 18."
|
|
::= { psDryContactorEntry 19 }
|
|
|
|
psDryContactorAlarm19 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 19."
|
|
::= { psDryContactorEntry 20 }
|
|
psDryContactorAlarm20 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 20."
|
|
::= { psDryContactorEntry 21 }
|
|
|
|
psDryContactorAlarm21 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 21."
|
|
::= { psDryContactorEntry 22 }
|
|
psDryContactorAlarm22 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 22."
|
|
::= { psDryContactorEntry 23}
|
|
|
|
|
|
|
|
|
|
|
|
psDryContactorAlarm23 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 23."
|
|
::= { psDryContactorEntry 24 }
|
|
|
|
|
|
psDryContactorAlarm24 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 24."
|
|
::= { psDryContactorEntry 25 }
|
|
|
|
psDryContactorAlarm25 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 25."
|
|
::= { psDryContactorEntry 26 }
|
|
psDryContactorAlarm26 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 26."
|
|
::= { psDryContactorEntry 27 }
|
|
|
|
psDryContactorAlarm27 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 27."
|
|
::= { psDryContactorEntry 28 }
|
|
psDryContactorAlarm28 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 28."
|
|
::= { psDryContactorEntry 29}
|
|
|
|
psDryContactorAlarm29 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 29."
|
|
::= { psDryContactorEntry 30}
|
|
psDryContactorAlarm30 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 30."
|
|
::= { psDryContactorEntry 31 }
|
|
|
|
psDryContactorAlarm31 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 31."
|
|
::= { psDryContactorEntry 32 }
|
|
psDryContactorAlarm32 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 32."
|
|
::= { psDryContactorEntry 33}
|
|
|
|
psDryContactStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dry contactor alarm status "
|
|
::= { psContuctor 12 }
|
|
|
|
|
|
|
|
|
|
psDryContact1Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsDryContactor1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Dry Contactor alarm table."
|
|
|
|
::= { psContuctor 13 }
|
|
|
|
|
|
psDryContactor1Entry OBJECT-TYPE
|
|
SYNTAX PsDryContactor1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"An entry in this table defines for each Dry Contactor the Alarm vector"
|
|
INDEX {psDryContactor1Index}
|
|
::= { psDryContact1Table 1 }
|
|
|
|
PsDryContactor1Entry ::= SEQUENCE {
|
|
psDryContactor1Index INTEGER,
|
|
psDryContactor1Alarm1 INTEGER,
|
|
psDryContactor1Alarm2 INTEGER,
|
|
psDryContactor1Alarm3 INTEGER,
|
|
psDryContactor1Alarm4 INTEGER,
|
|
psDryContactor1Alarm5 INTEGER,
|
|
psDryContactor1Alarm6 INTEGER,
|
|
psDryContactor1Alarm7 INTEGER,
|
|
psDryContactor1Alarm8 INTEGER,
|
|
psDryContactor1Alarm9 INTEGER,
|
|
psDryContactor1Alarm10 INTEGER,
|
|
psDryContactor1Alarm11 INTEGER,
|
|
psDryContactor1Alarm12 INTEGER,
|
|
psDryContactor1Alarm13 INTEGER,
|
|
psDryContactor1Alarm14 INTEGER,
|
|
psDryContactor1Alarm15 INTEGER,
|
|
psDryContactor1Alarm16 INTEGER,
|
|
psDryContactor1Alarm17 INTEGER,
|
|
psDryContactor1Alarm18 INTEGER,
|
|
psDryContactor1Alarm19 INTEGER,
|
|
psDryContactor1Alarm20 INTEGER,
|
|
psDryContactor1Alarm21 INTEGER,
|
|
psDryContactor1Alarm22 INTEGER,
|
|
psDryContactor1Alarm23 INTEGER,
|
|
psDryContactor1Alarm24 INTEGER,
|
|
psDryContactor1Alarm25 INTEGER,
|
|
psDryContactor1Alarm26 INTEGER,
|
|
psDryContactor1Alarm27 INTEGER,
|
|
psDryContactor1Alarm28 INTEGER,
|
|
psDryContactor1Alarm29 INTEGER,
|
|
psDryContactor1Alarm30 INTEGER,
|
|
psDryContactor1Alarm31 INTEGER,
|
|
psDryContactor1Alarm32 INTEGER
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
psDryContactor1Index OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The DRY Contact table index."
|
|
::= { psDryContactor1Entry 1 }
|
|
|
|
psDryContactor1Alarm1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 1."
|
|
::= { psDryContactor1Entry 2 }
|
|
|
|
|
|
psDryContactor1Alarm2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 2."
|
|
::= { psDryContactor1Entry 3 }
|
|
|
|
psDryContactor1Alarm3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 3."
|
|
::= { psDryContactor1Entry 4 }
|
|
psDryContactor1Alarm4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 4."
|
|
::= { psDryContactor1Entry 5 }
|
|
|
|
psDryContactor1Alarm5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 5."
|
|
::= { psDryContactor1Entry 6 }
|
|
psDryContactor1Alarm6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 6."
|
|
::= { psDryContactor1Entry 7}
|
|
|
|
|
|
|
|
|
|
psDryContactor1Alarm7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 7."
|
|
::= { psDryContactor1Entry 8 }
|
|
psDryContactor1Alarm8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 8."
|
|
::= { psDryContactor1Entry 9 }
|
|
|
|
psDryContactor1Alarm9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 9."
|
|
::= { psDryContactor1Entry 10}
|
|
|
|
|
|
|
|
psDryContactor1Alarm10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 10."
|
|
::= { psDryContactor1Entry 11}
|
|
psDryContactor1Alarm11 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 11."
|
|
::= { psDryContactor1Entry 12}
|
|
|
|
|
|
|
|
psDryContactor1Alarm12 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 12."
|
|
::= { psDryContactor1Entry 13 }
|
|
|
|
psDryContactor1Alarm13 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 13."
|
|
::= { psDryContactor1Entry 14}
|
|
|
|
|
|
psDryContactor1Alarm14 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 14."
|
|
::= { psDryContactor1Entry 15 }
|
|
|
|
psDryContactor1Alarm15 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 15."
|
|
::= { psDryContactor1Entry 16 }
|
|
psDryContactor1Alarm16 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 16."
|
|
::= { psDryContactor1Entry 17}
|
|
|
|
|
|
|
|
|
|
psDryContactor1Alarm17 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 17."
|
|
::= { psDryContactor1Entry 18 }
|
|
|
|
|
|
psDryContactor1Alarm18 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 18."
|
|
::= { psDryContactor1Entry 19 }
|
|
|
|
psDryContactor1Alarm19 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 19."
|
|
::= { psDryContactor1Entry 20 }
|
|
psDryContactor1Alarm20 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 20."
|
|
::= { psDryContactor1Entry 21 }
|
|
|
|
psDryContactor1Alarm21 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 21."
|
|
::= { psDryContactor1Entry 22 }
|
|
psDryContactor1Alarm22 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 22."
|
|
::= { psDryContactor1Entry 23}
|
|
|
|
|
|
|
|
|
|
|
|
psDryContactor1Alarm23 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 23."
|
|
::= { psDryContactor1Entry 24 }
|
|
|
|
|
|
psDryContactor1Alarm24 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 24."
|
|
::= { psDryContactor1Entry 25 }
|
|
|
|
psDryContactor1Alarm25 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 25."
|
|
::= { psDryContactor1Entry 26 }
|
|
psDryContactor1Alarm26 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 26."
|
|
::= { psDryContactor1Entry 27 }
|
|
|
|
psDryContactor1Alarm27 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 27."
|
|
::= { psDryContactor1Entry 28 }
|
|
psDryContactor1Alarm28 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 28."
|
|
::= { psDryContactor1Entry 29}
|
|
|
|
psDryContactor1Alarm29 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 29."
|
|
::= { psDryContactor1Entry 30}
|
|
psDryContactor1Alarm30 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 30."
|
|
::= { psDryContactor1Entry 31 }
|
|
|
|
psDryContactor1Alarm31 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 31."
|
|
::= { psDryContactor1Entry 32 }
|
|
psDryContactor1Alarm32 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 32."
|
|
::= { psDryContactor1Entry 33}
|
|
|
|
psDryContact1Status OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dry contactor alarm status "
|
|
::= { psContuctor 14 }
|
|
|
|
|
|
|
|
|
|
psDryContact2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsDryContactor2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Dry Contactor alarm table."
|
|
|
|
::= { psContuctor 15 }
|
|
|
|
|
|
psDryContactor2Entry OBJECT-TYPE
|
|
SYNTAX PsDryContactor2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"An entry in this table defines for each Dry Contactor the Alarm vector"
|
|
INDEX {psDryContactor2Index}
|
|
::= { psDryContact2Table 1 }
|
|
|
|
PsDryContactor2Entry ::= SEQUENCE {
|
|
psDryContactor2Index INTEGER,
|
|
psDryContactor2Alarm1 INTEGER,
|
|
psDryContactor2Alarm2 INTEGER,
|
|
psDryContactor2Alarm3 INTEGER,
|
|
psDryContactor2Alarm4 INTEGER,
|
|
psDryContactor2Alarm5 INTEGER,
|
|
psDryContactor2Alarm6 INTEGER,
|
|
psDryContactor2Alarm7 INTEGER,
|
|
psDryContactor2Alarm8 INTEGER,
|
|
psDryContactor2Alarm9 INTEGER,
|
|
psDryContactor2Alarm10 INTEGER,
|
|
psDryContactor2Alarm11 INTEGER,
|
|
psDryContactor2Alarm12 INTEGER,
|
|
psDryContactor2Alarm13 INTEGER,
|
|
psDryContactor2Alarm14 INTEGER,
|
|
psDryContactor2Alarm15 INTEGER,
|
|
psDryContactor2Alarm16 INTEGER,
|
|
psDryContactor2Alarm17 INTEGER,
|
|
psDryContactor2Alarm18 INTEGER,
|
|
psDryContactor2Alarm19 INTEGER,
|
|
psDryContactor2Alarm20 INTEGER,
|
|
psDryContactor2Alarm21 INTEGER,
|
|
psDryContactor2Alarm22 INTEGER,
|
|
psDryContactor2Alarm23 INTEGER,
|
|
psDryContactor2Alarm24 INTEGER,
|
|
psDryContactor2Alarm25 INTEGER,
|
|
psDryContactor2Alarm26 INTEGER,
|
|
psDryContactor2Alarm27 INTEGER,
|
|
psDryContactor2Alarm28 INTEGER,
|
|
psDryContactor2Alarm29 INTEGER,
|
|
psDryContactor2Alarm30 INTEGER,
|
|
psDryContactor2Alarm31 INTEGER,
|
|
psDryContactor2Alarm32 INTEGER
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
psDryContactor2Index OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The DRY Contact table index."
|
|
::= { psDryContactor2Entry 1 }
|
|
|
|
psDryContactor2Alarm1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 1."
|
|
::= { psDryContactor2Entry 2 }
|
|
|
|
|
|
psDryContactor2Alarm2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 2."
|
|
::= { psDryContactor2Entry 3 }
|
|
|
|
psDryContactor2Alarm3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 3."
|
|
::= { psDryContactor2Entry 4 }
|
|
psDryContactor2Alarm4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 4."
|
|
::= { psDryContactor2Entry 5 }
|
|
|
|
psDryContactor2Alarm5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 5."
|
|
::= { psDryContactor2Entry 6 }
|
|
psDryContactor2Alarm6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 6."
|
|
::= { psDryContactor2Entry 7}
|
|
|
|
|
|
|
|
|
|
psDryContactor2Alarm7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 7."
|
|
::= { psDryContactor2Entry 8 }
|
|
psDryContactor2Alarm8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 8."
|
|
::= { psDryContactor2Entry 9 }
|
|
|
|
psDryContactor2Alarm9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 9."
|
|
::= { psDryContactor2Entry 10}
|
|
|
|
|
|
|
|
psDryContactor2Alarm10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 10."
|
|
::= { psDryContactor2Entry 11}
|
|
psDryContactor2Alarm11 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 11."
|
|
::= { psDryContactor2Entry 12}
|
|
|
|
|
|
|
|
psDryContactor2Alarm12 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 12."
|
|
::= { psDryContactor2Entry 13 }
|
|
|
|
psDryContactor2Alarm13 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 13."
|
|
::= { psDryContactor2Entry 14}
|
|
|
|
|
|
psDryContactor2Alarm14 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 14."
|
|
::= { psDryContactor2Entry 15 }
|
|
|
|
psDryContactor2Alarm15 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 15."
|
|
::= { psDryContactor2Entry 16 }
|
|
psDryContactor2Alarm16 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 16."
|
|
::= { psDryContactor2Entry 17}
|
|
|
|
|
|
|
|
|
|
psDryContactor2Alarm17 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 17."
|
|
::= { psDryContactor2Entry 18 }
|
|
|
|
|
|
psDryContactor2Alarm18 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 18."
|
|
::= { psDryContactor2Entry 19 }
|
|
|
|
psDryContactor2Alarm19 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 19."
|
|
::= { psDryContactor2Entry 20 }
|
|
psDryContactor2Alarm20 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 20."
|
|
::= { psDryContactor2Entry 21 }
|
|
|
|
psDryContactor2Alarm21 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 21."
|
|
::= { psDryContactor2Entry 22 }
|
|
psDryContactor2Alarm22 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 22."
|
|
::= { psDryContactor2Entry 23}
|
|
|
|
|
|
|
|
|
|
|
|
psDryContactor2Alarm23 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 23."
|
|
::= { psDryContactor2Entry 24 }
|
|
|
|
|
|
psDryContactor2Alarm24 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 24."
|
|
::= { psDryContactor2Entry 25 }
|
|
|
|
psDryContactor2Alarm25 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 25."
|
|
::= { psDryContactor2Entry 26 }
|
|
psDryContactor2Alarm26 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 26."
|
|
::= { psDryContactor2Entry 27 }
|
|
|
|
psDryContactor2Alarm27 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 27."
|
|
::= { psDryContactor2Entry 28 }
|
|
psDryContactor2Alarm28 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 28."
|
|
::= { psDryContactor2Entry 29}
|
|
|
|
psDryContactor2Alarm29 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 29."
|
|
::= { psDryContactor2Entry 30}
|
|
psDryContactor2Alarm30 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 30."
|
|
::= { psDryContactor2Entry 31 }
|
|
|
|
psDryContactor2Alarm31 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 31."
|
|
::= { psDryContactor2Entry 32 }
|
|
psDryContactor2Alarm32 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
notset (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dry Contactor Alarm 32."
|
|
::= { psDryContactor2Entry 33}
|
|
|
|
psDryContact2Status OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dry contactor alarm status "
|
|
::= { psContuctor 16 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- SEVERITY MAPING index :1 = Critical , 2 = major 3 = minor 4 = worning
|
|
|
|
psSeverityMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsSeverityMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Severity table."
|
|
::= { psSeverityMap 1 }
|
|
|
|
psSeverityMapEntry OBJECT-TYPE
|
|
SYNTAX PsSeverityMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines Severity per Alarm psSeverityIndex 1 = Critical and 4 = worning . "
|
|
INDEX { psSeverityMapIndex }
|
|
::= { psSeverityMapTable 1 }
|
|
|
|
PsSeverityMapEntry ::= SEQUENCE {
|
|
psSeverityMapIndex INTEGER,
|
|
psSeverityMapAlarm1to32 INTEGER,
|
|
psSeverityMapAlarm33to64 INTEGER,
|
|
psSeverityMapAlarm65to96 INTEGER
|
|
|
|
|
|
}
|
|
|
|
psSeverityMapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The PS table index 1= critical , 4 = worning ."
|
|
::= { psSeverityMapEntry 1 }
|
|
|
|
|
|
|
|
|
|
psSeverityMapAlarm1to32 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Alarm 1 to 32."
|
|
::= { psSeverityMapEntry 2 }
|
|
|
|
|
|
psSeverityMapAlarm33to64 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Alarm 33 to 64."
|
|
::= { psSeverityMapEntry 3 }
|
|
|
|
psSeverityMapAlarm65to96 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Alarm 65 to 96."
|
|
::= { psSeverityMapEntry 4 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- The PS Nominal Values Configuration group consists of the following objects:
|
|
|
|
--
|
|
-- Nominal Configuration MIB definitions
|
|
--
|
|
|
|
psConfEnableCurrentLimit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
enable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable Current Limit "
|
|
::= { psConfNominal 1 }
|
|
|
|
|
|
psConfEnablePeriodicEqualize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
enable (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable Periodic Equalize"
|
|
::= { psConfNominal 2 }
|
|
|
|
|
|
|
|
psConfGHighTempAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" High Temprature Alarm Giving in Celsious "
|
|
::= { psConfNominal 3 }
|
|
|
|
|
|
psConfLowTempAlarmSign OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
positive (0),
|
|
negative (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Low Temperature Alarm Sign "
|
|
::= { psConfNominal 4 }
|
|
|
|
|
|
psConfLowTempAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Low Temprature Alarm Giving in Celsious "
|
|
::= { psConfNominal 5 }
|
|
|
|
|
|
psConfTemperatureCoefficient OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Temperature Coefficient 0.01V/C"
|
|
::= { psConfNominal 6 }
|
|
|
|
|
|
psConfNumOfInvertors OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number Of Invertors "
|
|
::= { psConfNominal 7 }
|
|
|
|
|
|
psConfNumOfRectifiers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number Of Psu's "
|
|
::= { psConfNominal 8 }
|
|
|
|
psConfACHigh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC High Voltage Alarm"
|
|
::= { psConfNominal 9 }
|
|
|
|
|
|
psConfACLow OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Low Voltage Alarm"
|
|
::= { psConfNominal 10 }
|
|
|
|
psConfCurrentLimit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Current Limit "
|
|
::= { psConfNominal 11 }
|
|
|
|
psConfHIA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" HI_A "
|
|
::= { psConfNominal 12 }
|
|
|
|
|
|
psConfBDOC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" BDOC "
|
|
::= { psConfNominal 13 }
|
|
|
|
psConfBatteryNominalCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Battery Nominal Capacity"
|
|
::= { psConfNominal 14 }
|
|
|
|
psConfEqualStopTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equal Stop Time "
|
|
::= { psConfNominal 15 }
|
|
|
|
psConfEqualStopCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equal Stop Current "
|
|
::= { psConfNominal 16 }
|
|
|
|
psConfEqualPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equal Period "
|
|
::= { psConfNominal 17 }
|
|
psConfEqualStartCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equal Start Current "
|
|
::= { psConfNominal 18 }
|
|
|
|
psConfMajorLowVoltage1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Major Low Voltage for MAJ_LV1 Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 19 }
|
|
|
|
psConfMajorLowVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Major Low Voltage for MAJ_LV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 20 }
|
|
|
|
psConfMinorLowVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minor Low Voltage for MIN_LV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 21 }
|
|
|
|
psConfMinorHighVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minor High Voltage for MIN_HV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 22 }
|
|
|
|
psConfMajorHighVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Major High Voltage for MAJ_HV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 23}
|
|
|
|
|
|
psConfFloatingVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Floating Voltage set giving in units of 0.01V "
|
|
::= { psConfNominal 24 }
|
|
psConfEqualizingVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Equalizing Voltage set giving in units of 0.01V "
|
|
::= { psConfNominal 25 }
|
|
|
|
psConfNumberOfBattery OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number Of Batteries "
|
|
::= { psConfNominal 26 }
|
|
|
|
|
|
psConfEnableTempComp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
enable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable Temperature Comp. "
|
|
::= { psConfNominal 27 }
|
|
psConfNumberOfLVD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number Of Contacts "
|
|
::= { psConfNominal 28 }
|
|
|
|
|
|
psConfEqMajorLowVoltageLV1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Major Low Voltage for MAJ_LV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 29 }
|
|
|
|
psConfEqMajorLowVoltageLv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minor Low Voltage for MIN_LV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 30 }
|
|
|
|
psConfEqMinorLowVoltageLV OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minor Lowh Voltage for MIN_LV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 31 }
|
|
|
|
psConfEqMinorHighVoltageHV OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Mainor High Voltage for MAJ_HV Alarm giving in units of 0.01V "
|
|
::= { psConfNominal 32}
|
|
|
|
|
|
psConfEqMajorHighVoltageHV OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Major High Voltage HV set giving in units of 0.01V "
|
|
::= { psConfNominal 33 }
|
|
psConfInvertorVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Volt Set "
|
|
::= { psConfNominal 34 }
|
|
psConfInvertorHighVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" High Voltage Alarm 0.01 V"
|
|
::= { psConfNominal 35 }
|
|
|
|
psConfInvertorLowVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Low Voltage Alarm 0.01V"
|
|
::= { psConfNominal 36 }
|
|
|
|
psConfLVDDisconnectTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Top time LVD to disconnect upon failure - in hours "
|
|
::= { psConfNominal 37 }
|
|
|
|
psConfNomSpare0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 38 }
|
|
|
|
psConfNomSpare1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 39 }
|
|
|
|
psConfNomSpare2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 40 }
|
|
|
|
psConfNomSpare3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 41 }
|
|
|
|
psConfNomSpare4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 42 }
|
|
|
|
psConfNomSpare5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 43 }
|
|
|
|
psConfNomSpare6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 44 }
|
|
|
|
psConfNomSpare7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 45 }
|
|
|
|
psConfNomSpare8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 46 }
|
|
|
|
psConfNomSpare9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 47 }
|
|
|
|
psConfNomSpare10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psConfNominal 48 }
|
|
|
|
|
|
|
|
-- The PS Alarm STatus group consists of the following objects:
|
|
|
|
--
|
|
-- Status MIB definitions
|
|
--
|
|
|
|
psStatusAlarm1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" More Then one rectifier is bad "
|
|
::= { psStatus 1 }
|
|
|
|
|
|
psStatusAlarm2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" One Rectifier is bad "
|
|
::= { psStatus 2 }
|
|
|
|
|
|
|
|
psStatusAlarm3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Line Failure"
|
|
::= { psStatus 3 }
|
|
|
|
psStatusAlarm4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Controler Internal Supply is bad"
|
|
::= { psStatus 4 }
|
|
|
|
psStatusAlarm5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Line Too High"
|
|
::= { psStatus 5 }
|
|
|
|
psStatusAlarm6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Line Too Low"
|
|
::= { psStatus 6 }
|
|
|
|
psStatusAlarm7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Over Temperature "
|
|
::= { psStatus 7 }
|
|
|
|
psStatusAlarm8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" BDOCA "
|
|
::= { psStatus 8 }
|
|
|
|
|
|
psStatusAlarm9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Too High Rectifier is off "
|
|
::= { psStatus 9 }
|
|
|
|
|
|
|
|
psStatusAlarm10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC High Worning "
|
|
::= { psStatus 10 }
|
|
|
|
|
|
psStatusAlarm11 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Too LOw Lvd Disconnect "
|
|
::= { psStatus 11 }
|
|
|
|
psStatusAlarm12 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Low Worning "
|
|
::= { psStatus 12 }
|
|
|
|
|
|
|
|
psStatusAlarm13 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" LVD Contact Open "
|
|
::= { psStatus 13 }
|
|
|
|
psStatusAlarm14 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Load Breaker Open "
|
|
::= { psStatus 14 }
|
|
|
|
psStatusAlarm15 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Running in Equalizing "
|
|
::= { psStatus 15 }
|
|
|
|
psStatusAlarm16 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Last Battery Test Fail "
|
|
::= { psStatus 16 }
|
|
|
|
psStatusAlarm17 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psStatus 17 }
|
|
|
|
|
|
|
|
psStatusAlarm18 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psStatus 18 }
|
|
|
|
psStatusAlarm19 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psStatus 19 }
|
|
|
|
psStatusAlarm20 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserver "
|
|
::= { psStatus 20 }
|
|
|
|
psStatusAlarm21 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PD Not Responding "
|
|
::= { psStatus 21 }
|
|
|
|
psStatusAlarm22 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Invertor Not Responding "
|
|
::= { psStatus 22 }
|
|
psStatusAlarm23 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Rectifier Not Responding "
|
|
::= { psStatus 23 }
|
|
|
|
psStatusAlarm24 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Last Self Test Failed "
|
|
::= { psStatus 24 }
|
|
|
|
psStatusAlarm25 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Fuse "
|
|
::= { psStatus 25 }
|
|
|
|
psStatusAlarm26 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Current Sharing in Rectifier "
|
|
::= { psStatus 26 }
|
|
|
|
|
|
psStatusAlarm27 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Output in Rectifier "
|
|
::= { psStatus 27 }
|
|
|
|
psStatusAlarm28 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Relay Board "
|
|
::= { psStatus 28 }
|
|
|
|
psStatusAlarm29 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Load Current too High "
|
|
::= { psStatus 29 }
|
|
|
|
psStatusAlarm30 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Serge Blown "
|
|
::= { psStatus 30 }
|
|
|
|
psStatusAlarm31 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Gets Set at Start Up "
|
|
::= { psStatus 31 }
|
|
psStatusAlarm32 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Misc Alarm "
|
|
::= { psStatus 32 }
|
|
psStatusAlarm33 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 33 }
|
|
psStatusAlarm34 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 34 }
|
|
psStatusAlarm35 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 35 }
|
|
psStatusAlarm36 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 36 }
|
|
psStatusAlarm37 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 37 }
|
|
psStatusAlarm38 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 38}
|
|
psStatusAlarm39 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 39 }
|
|
psStatusAlarm40 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 40}
|
|
psStatusAlarm41 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 41 }
|
|
psStatusAlarm42 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 42 }
|
|
psStatusAlarm43 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 43 }
|
|
psStatusAlarm44 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 44 }
|
|
psStatusAlarm45 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 45 }
|
|
psStatusAlarm46 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 46 }
|
|
psStatusAlarm47 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 47 }
|
|
psStatusAlarm48 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 48 }
|
|
psStatusAlarm49 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 49 }
|
|
psStatusAlarm50 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 50}
|
|
psStatusAlarm51 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 51 }
|
|
psStatusAlarm52 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 52 }
|
|
psStatusAlarm53 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 53 }
|
|
psStatusAlarm54 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 54 }
|
|
psStatusAlarm55 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 55 }
|
|
psStatusAlarm56 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 56 }
|
|
psStatusAlarm57 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 57 }
|
|
psStatusAlarm58 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 58 }
|
|
psStatusAlarm59 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 59 }
|
|
psStatusAlarm60 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 60 }
|
|
psStatusAlarm61 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 61 }
|
|
psStatusAlarm62 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 62 }
|
|
psStatusAlarm63 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 63 }
|
|
|
|
psStatusAlarm64 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 64 }
|
|
|
|
psStatusAlarm65 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 65 }
|
|
psStatusAlarm66 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 66 }
|
|
psStatusAlarm67 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 67 }
|
|
psStatusAlarm68 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 68 }
|
|
psStatusAlarm69 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 69 }
|
|
psStatusAlarm70 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 70}
|
|
psStatusAlarm71 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 71 }
|
|
psStatusAlarm72 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 72}
|
|
psStatusAlarm73 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 73 }
|
|
psStatusAlarm74 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 74 }
|
|
psStatusAlarm75 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 75 }
|
|
psStatusAlarm76 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 76 }
|
|
psStatusAlarm77 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 77 }
|
|
psStatusAlarm78 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 78 }
|
|
psStatusAlarm79 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 79 }
|
|
psStatusAlarm80 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 80 }
|
|
psStatusAlarm81 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 81 }
|
|
psStatusAlarm82 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 82}
|
|
psStatusAlarm83 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 83 }
|
|
psStatusAlarm84 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 84 }
|
|
psStatusAlarm85 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 85 }
|
|
psStatusAlarm86 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 86 }
|
|
psStatusAlarm87 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 87 }
|
|
psStatusAlarm88 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 88 }
|
|
psStatusAlarm89 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 89 }
|
|
psStatusAlarm90 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 90 }
|
|
psStatusAlarm91 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 91 }
|
|
psStatusAlarm92 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 92 }
|
|
psStatusAlarm93 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 93 }
|
|
psStatusAlarm94 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 94 }
|
|
psStatusAlarm95 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 95 }
|
|
|
|
psStatusAlarm96 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notactive (0),
|
|
warning (4),
|
|
minor (3),
|
|
major (2),
|
|
critical (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psStatus 96 }
|
|
|
|
|
|
|
|
psStatusAlarmStruct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Alarm 32 bit integer struct "
|
|
::= { psStatus 97}
|
|
|
|
psStatusAlarmStruct1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Alarm 32 bit integer struct "
|
|
::= { psStatus 98}
|
|
|
|
|
|
psStatusAlarmStruct2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Alarm 32 bit integer struct "
|
|
::= { psStatus 99}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- The PS UNIT INFORMATION group consists of the following objects:
|
|
|
|
--
|
|
-- Status MIB definitions
|
|
--
|
|
|
|
psUnitSysName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Name of the system "
|
|
::= { psUnit 1 }
|
|
psUnitManufacture OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Name of Manufacture "
|
|
::= { psUnit 2 }
|
|
|
|
psUnitBatteryType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of battery "
|
|
::= { psUnit 3 }
|
|
|
|
psUnitPSType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of power supply "
|
|
::= { psUnit 4 }
|
|
|
|
|
|
psUnitControllerType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of Controller "
|
|
::= { psUnit 5 }
|
|
|
|
psUnitSoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Software Version "
|
|
::= { psUnit 6 }
|
|
|
|
psUnitComProtocolVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Communication protocol version "
|
|
::= { psUnit 7 }
|
|
|
|
psUnitSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Serial Number "
|
|
::= { psUnit 8 }
|
|
|
|
psUnitRTCDay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Real Time Clock Day "
|
|
::= { psUnit 9 }
|
|
psUnitRTCMonth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Real Time Clock Month "
|
|
::= { psUnit 10 }
|
|
psUnitRTCYear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Real Time Clock Year "
|
|
::= { psUnit 11 }
|
|
|
|
psUnitRTCHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Real Time Clock Hour "
|
|
::= { psUnit 12 }
|
|
|
|
psUnitRTCMinute OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Real Time Clock Minutes "
|
|
::= { psUnit 13 }
|
|
|
|
psUnitRTCSecond OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Real Time Clock Seconds "
|
|
::= { psUnit 14 }
|
|
|
|
|
|
|
|
|
|
psWorkingTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Hours of Working Time"
|
|
::= {psUnit 15}
|
|
|
|
psScreenShot OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (160))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Display Led Image"
|
|
::= {psUnit 16}
|
|
|
|
psSpareIde0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 17}
|
|
psSpareIde1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 18}
|
|
psSpareIde2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 19}
|
|
psSpareIde3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 20}
|
|
psSpareIde4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 21}
|
|
psSpareIde5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 22}
|
|
psSpareIde6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 23}
|
|
psSpareIde7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare IDE"
|
|
::= {psUnit 24}
|
|
|
|
-- The Statistics group consists of the following objects:
|
|
|
|
-- Hourly Statistics
|
|
-- Daily Statistics
|
|
-- Monthly Statistics
|
|
-- LOG MIB definitions
|
|
--
|
|
|
|
|
|
|
|
|
|
psHourlyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsHourlyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Hourly Information table."
|
|
::= { psStatistics 1 }
|
|
|
|
psHourlyEntry OBJECT-TYPE
|
|
SYNTAX PsHourlyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines statistics per hour. The entry is indexed by the psHorlyIndex. "
|
|
INDEX { psHourlyIndex }
|
|
::= { psHourlyTable 1 }
|
|
|
|
PsHourlyEntry ::= SEQUENCE {
|
|
psHourlyIndex INTEGER,
|
|
psHourlyMaxVoltage INTEGER,
|
|
psHourlyMinVoltage INTEGER,
|
|
psHourlyAvrVoltage INTEGER,
|
|
psHourlyMaxCurrent INTEGER,
|
|
psHourlyMinCurrent INTEGER,
|
|
psHourlyAvrCurrent INTEGER,
|
|
psHourlyEndTime INTEGER
|
|
}
|
|
|
|
psHourlyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Hourlytable index."
|
|
::= { psHourlyEntry 1 }
|
|
|
|
|
|
psHourlyMaxVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Voltage present in 0.01V "
|
|
::= { psHourlyEntry 2 }
|
|
|
|
|
|
psHourlyMinVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Miniimum Voltage present in 0.01V "
|
|
::= { psHourlyEntry 3 }
|
|
|
|
|
|
psHourlyAvrVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Voltage present in 0.01V "
|
|
::= { psHourlyEntry 4 }
|
|
|
|
|
|
|
|
|
|
psHourlyMinCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum current present in 0.1A "
|
|
::= { psHourlyEntry 5 }
|
|
|
|
|
|
psHourlyMaxCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum current present in 0.1A "
|
|
::= { psHourlyEntry 6 }
|
|
|
|
|
|
psHourlyAvrCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average current present in 0.1A "
|
|
::= { psHourlyEntry 7 }
|
|
|
|
psHourlyEndTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..23)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" End Time of hour interval . Between 00 to 23 "
|
|
::= { psHourlyEntry 8 }
|
|
|
|
|
|
-- Daily Table
|
|
|
|
psDailyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsDailyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Daily Information table."
|
|
::= { psStatistics 2 }
|
|
|
|
psDailyEntry OBJECT-TYPE
|
|
SYNTAX PsDailyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines statistics per hour. The entry is indexed by the psHorlyIndex. "
|
|
INDEX { psDailyIndex }
|
|
::= { psDailyTable 1 }
|
|
|
|
PsDailyEntry ::= SEQUENCE {
|
|
psDailyIndex INTEGER,
|
|
psDailyMaxVoltage INTEGER,
|
|
psDailyMinVoltage INTEGER,
|
|
psDailyAvrVoltage INTEGER,
|
|
psDailyMaxCurrent INTEGER,
|
|
psDailyMinCurrent INTEGER,
|
|
psDailyAvrCurrent INTEGER,
|
|
psDailyDayOfMonth INTEGER
|
|
}
|
|
|
|
psDailyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Dailytable index."
|
|
::= { psDailyEntry 1 }
|
|
|
|
|
|
psDailyMaxVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Voltage present in 0.01V "
|
|
::= { psDailyEntry 2 }
|
|
|
|
|
|
psDailyMinVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Miniimum Voltage present in 0.01V "
|
|
::= { psDailyEntry 3 }
|
|
|
|
|
|
psDailyAvrVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Voltage present in 0.01V "
|
|
::= { psDailyEntry 4 }
|
|
|
|
|
|
|
|
|
|
psDailyMinCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum current present in 0.1A "
|
|
::= { psDailyEntry 5 }
|
|
|
|
psDailyMaxCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum current present in 0.1A "
|
|
::= { psDailyEntry 6 }
|
|
|
|
|
|
|
|
|
|
psDailyAvrCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average current present in 0.1A "
|
|
::= { psDailyEntry 7 }
|
|
|
|
psDailyDayOfMonth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Day of Month Between 1 to 31 "
|
|
::= { psDailyEntry 8 }
|
|
|
|
|
|
|
|
--
|
|
-- Monthly Table
|
|
|
|
psMonthlyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsMonthlyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Monthly Information table."
|
|
::= { psStatistics 3 }
|
|
|
|
psMonthlyEntry OBJECT-TYPE
|
|
SYNTAX PsMonthlyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines statistics per hour. The entry is indexed by the psHorlyIndex. "
|
|
INDEX { psMonthlyIndex }
|
|
::= { psMonthlyTable 1 }
|
|
|
|
PsMonthlyEntry ::= SEQUENCE {
|
|
psMonthlyIndex INTEGER,
|
|
psMonthlyMaxVoltage INTEGER,
|
|
psMonthlyMinVoltage INTEGER,
|
|
psMonthlyAvrVoltage INTEGER,
|
|
psMonthlyMaxCurrent INTEGER,
|
|
psMonthlyMinCurrent INTEGER,
|
|
psMonthlyAvrCurrent INTEGER,
|
|
psMonthlyMonth INTEGER
|
|
|
|
}
|
|
|
|
psMonthlyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Monthlytable index."
|
|
::= { psMonthlyEntry 1 }
|
|
|
|
|
|
psMonthlyMaxVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Voltage present in 0.01V "
|
|
::= { psMonthlyEntry 2 }
|
|
|
|
|
|
psMonthlyMinVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Miniimum Voltage present in 0.01V "
|
|
::= { psMonthlyEntry 3 }
|
|
|
|
|
|
psMonthlyAvrVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Voltage present in 0.01V "
|
|
::= { psMonthlyEntry 4 }
|
|
|
|
|
|
|
|
|
|
psMonthlyMinCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum current present in 0.1A "
|
|
::= { psMonthlyEntry 5 }
|
|
|
|
psMonthlyMaxCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum current present in 0.1A "
|
|
::= { psMonthlyEntry 6 }
|
|
|
|
|
|
psMonthlyAvrCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average current present in 0.1A "
|
|
::= { psMonthlyEntry 7 }
|
|
|
|
psMonthlyMonth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Month Between 1 to 12 "
|
|
::= { psMonthlyEntry 8 }
|
|
|
|
psHourlyFirst OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The first in Hourlytable index."
|
|
::= { psStatistics 4 }
|
|
|
|
psHourlyLast OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Last in Hourlytable index."
|
|
::= { psStatistics 5 }
|
|
|
|
psDailyFirst OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The first in Daily table index."
|
|
::= { psStatistics 6 }
|
|
|
|
psDailyLast OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Last in Daily table index."
|
|
::= { psStatistics 7 }
|
|
psMonthlyFirst OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The first in Monthly table index."
|
|
::= { psStatistics 8 }
|
|
|
|
psMonthlyLast OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Last in Monthlytable index."
|
|
::= { psStatistics 9}
|
|
|
|
|
|
|
|
-- The Loggroup consists of the following objects:
|
|
|
|
--
|
|
-- LOG MIB definitions
|
|
--
|
|
|
|
|
|
|
|
psLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PsLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Hourly Information table."
|
|
::= { psLog 1 }
|
|
|
|
psLogEntry OBJECT-TYPE
|
|
SYNTAX PsLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table defines statistics per hour. The entry is indexed by the psHorlyIndex. "
|
|
INDEX { psLogIndex }
|
|
::= { psLogTable 1 }
|
|
|
|
PsLogEntry ::= SEQUENCE {
|
|
psLogIndex INTEGER,
|
|
psLogDateYear INTEGER,
|
|
psLogDateMonth INTEGER,
|
|
|
|
psLogDateDay INTEGER,
|
|
|
|
psLogDateHour INTEGER,
|
|
|
|
psLogDateMinute INTEGER,
|
|
|
|
psLogDateSecond INTEGER,
|
|
|
|
|
|
psLogDCVoltage INTEGER,
|
|
psLogStatus INTEGER,
|
|
psLogAlarmCode INTEGER,
|
|
psLogDateTime INTEGER,
|
|
psLogGeneral INTEGER
|
|
}
|
|
|
|
psLogIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" TheLog index."
|
|
::= { psLogEntry 1 }
|
|
|
|
|
|
psLogDateYear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log Date and Time Year"
|
|
::= { psLogEntry 2 }
|
|
|
|
psLogDateMonth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log Date and Time Month"
|
|
::= { psLogEntry 3 }
|
|
psLogDateDay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log Date and Time Day"
|
|
::= { psLogEntry 4 }
|
|
|
|
psLogDateHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log Date and Time Hour"
|
|
::= { psLogEntry 5 }
|
|
|
|
psLogDateMinute OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log Date and Time Minute"
|
|
::= { psLogEntry 6 }
|
|
|
|
|
|
psLogDateSecond OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log Date and Time Second"
|
|
::= { psLogEntry 7 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
psLogDCVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log DC Voltage "
|
|
::= { psLogEntry 8 }
|
|
|
|
|
|
psLogStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contactor Status "
|
|
::= { psLogEntry 9 }
|
|
|
|
|
|
|
|
|
|
|
|
psLogAlarmCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Alarm Code "
|
|
::= { psLogEntry 10 }
|
|
|
|
psLogDateTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" date time year 7 bits , month 4 bits , day 5 bits, hours 5 bits,minutes 6 bits, seconds/2 5 bits "
|
|
::= { psLogEntry 11 }
|
|
|
|
|
|
psLogGeneral OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" General bit strin Information. It is deferent between various PS types "
|
|
::= { psLogEntry 12 }
|
|
|
|
psLogFirst OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The First sequence in log entry "
|
|
::= { psLog 2 }
|
|
|
|
psLogLast OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Last sequence in log entry "
|
|
::= { psLog 3 }
|
|
|
|
--
|
|
-- Trap MIB definitions
|
|
|
|
|
|
psTrapSeverity OBJECT-TYPE
|
|
SYNTAX PsAlarmSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS alarm Sevirity."
|
|
::= { psTrap 1}
|
|
|
|
|
|
psTrapStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS alarm status."
|
|
::= { psTrap 2}
|
|
psTrapActivation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS Trap Activation."
|
|
::= { psTrap 3 }
|
|
|
|
|
|
-- 1006 TRAPS -----
|
|
|
|
|
|
psAlarm1006 OBJECT IDENTIFIER ::= { psTrap 10}
|
|
psTrapPrefix1006 OBJECT IDENTIFIER ::= {psAlarm1006 0}
|
|
psTrap1006ACLow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC LOW"
|
|
::= {psTrapPrefix1006 1}
|
|
psTrap1006Battery2TestFault NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BATTERY No 2 TEST FAULT
|
|
"
|
|
::= {psTrapPrefix1006 2}
|
|
|
|
psTrap1006Battery1TestFault NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BATTERY No 1 TEST FAULT
|
|
"
|
|
::= {psTrapPrefix1006 3}
|
|
psTrap1006LVD2Open NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LVD2 DRIVEN OPEN (not physically sensed)
|
|
"
|
|
::= {psTrapPrefix1006 4}
|
|
|
|
psTrap1006LVD1Open NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LVD1 DRIVEN OPEN (not physically sensed)
|
|
"
|
|
::= {psTrapPrefix1006 5}
|
|
|
|
psTrap1006AUXContactOpen NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AUXILLIARY CONTACT OPEN"
|
|
::= {psTrapPrefix1006 6}
|
|
psTrap1006AUXBreakerOpen NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AUXILLIARY BREAKER OPEN"
|
|
::= {psTrapPrefix1006 7}
|
|
psTrap1006BatteryBreakerOpen NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BATTERY BREAKER OPEN"
|
|
::= {psTrapPrefix1006 8}
|
|
|
|
psTrap1006LoadBreakerOpen NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LOAD BREAKER OPEN"
|
|
::= {psTrapPrefix1006 9}
|
|
|
|
psTrap1006DCLOWLow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DC LOWLOW"
|
|
::= {psTrapPrefix1006 10}
|
|
psTrap1006Rectifier NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RECTIFIER (one or more)"
|
|
::= {psTrapPrefix1006 11}
|
|
|
|
psTrap1006OverTemptature NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OVER TEMPERATURE"
|
|
::= {psTrapPrefix1006 12}
|
|
psTrap1006LVDBypassOpen NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LVD bypass OPEN (one or both) "
|
|
::= {psTrapPrefix1006 13}
|
|
psTrap1006DCHigh NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DC HIGH "
|
|
::= {psTrapPrefix1006 14}
|
|
psTrap1006DCLow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DC Low "
|
|
::= {psTrapPrefix1006 15}
|
|
psTrap1006ACHigh NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC HIGH"
|
|
::= {psTrapPrefix1006 16}
|
|
|
|
psAlarm OBJECT IDENTIFIER ::= { psTrap 11}
|
|
psTrapPrefix OBJECT IDENTIFIER ::= {psAlarm 0}
|
|
psTrapRFAMAJ NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"More than 1 rectifier faulty "
|
|
::= {psTrapPrefix 1}
|
|
|
|
psTrapRFAMIN NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1 rectifier faulty "
|
|
::= {psTrapPrefix 2}
|
|
psTrapACFAIL NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC input is abnormal (low high & fail) "
|
|
::= {psTrapPrefix 3}
|
|
psTrapLVDX2 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Both LVDs are open "
|
|
::= {psTrapPrefix 4}
|
|
|
|
psTrapSYSOT NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"system over temperature"
|
|
::= {psTrapPrefix 5}
|
|
|
|
psTrapLVDX1 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One LVD is open"
|
|
::= {psTrapPrefix 6}
|
|
|
|
psTrapCBOPEN NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"load breaker open( min 1 of all load c.b)"
|
|
::= {psTrapPrefix 7}
|
|
psTrapEQHST NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Equalizing mode"
|
|
::= {psTrapPrefix 8}
|
|
|
|
psTrapBATTST NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last battery test fail"
|
|
::= {psTrapPrefix 9}
|
|
psTrapINUBAD NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1 or more inverter/s faulty"
|
|
::= {psTrapPrefix 10}
|
|
psTrapUNIVPD NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"universal PD not responding"
|
|
::= {psTrapPrefix 11}
|
|
|
|
psTrapIBADIN NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"an inverter/s not responding on PD bus"
|
|
::= {psTrapPrefix 12}
|
|
psTrapRBADIN NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"a rectifier/s not responding on PD bus"
|
|
::= {psTrapPrefix 13}
|
|
psTrapSLFTST NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"last self test failed"
|
|
::= {psTrapPrefix 14}
|
|
|
|
psTrapFUSEBD NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" battery fuse fault"
|
|
::= {psTrapPrefix 15}
|
|
psTrapLOADHI NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Load current high"
|
|
::= {psTrapPrefix 16}
|
|
|
|
psTrapSURGBD NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Surge fault"
|
|
::= {psTrapPrefix 17}
|
|
psTrapEQLONG NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" equalizing running more than 60 hours"
|
|
::= {psTrapPrefix 18}
|
|
|
|
|
|
psTrapFUSE24 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 24V Fuse fault"
|
|
::= {psTrapPrefix 19}
|
|
psTrapFUSE48 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 48V Fuse fault"
|
|
::= {psTrapPrefix 20}
|
|
|
|
|
|
psTrapBYPS2 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ByPass LVD2 is ON"
|
|
::= {psTrapPrefix 21}
|
|
|
|
psTrapBYPS1 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ByPass LVD1 is ON"
|
|
::= {psTrapPrefix 22}
|
|
|
|
|
|
psTrapCB24CR NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"24V breaker critical"
|
|
::= {psTrapPrefix 23}
|
|
psTrapCB48CR NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"48V breaker critical"
|
|
::= {psTrapPrefix 24}
|
|
psTrapBATOT NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
psTrapSeverity,
|
|
psTrapStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"battery over temperature"
|
|
::= {psTrapPrefix 25}
|
|
|
|
|
|
|
|
---
|
|
|
|
|
|
--
|
|
--
|
|
--
|
|
|
|
|
|
|
|
--
|
|
-- Alarm Set MIB definitions
|
|
--
|
|
|
|
psAlarmSet1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" More Then one rectifier is bad "
|
|
::= { psAlarmSet 1 }
|
|
|
|
psAlarmSet2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" One Rectifier is bad "
|
|
::= { psAlarmSet 2 }
|
|
|
|
|
|
|
|
psAlarmSet3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Line Failure"
|
|
::= { psAlarmSet 3 }
|
|
|
|
psAlarmSet4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Controler Internal Supply is bad"
|
|
::= { psAlarmSet 4 }
|
|
|
|
psAlarmSet5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Line Too High"
|
|
::= { psAlarmSet 5 }
|
|
|
|
psAlarmSet6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Line Too Low"
|
|
::= { psAlarmSet 6 }
|
|
|
|
psAlarmSet7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Over Temperature "
|
|
::= { psAlarmSet 7 }
|
|
|
|
psAlarmSet8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" BDOCA "
|
|
::= { psAlarmSet 8 }
|
|
|
|
|
|
psAlarmSet9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Too High Rectifier is off "
|
|
::= { psAlarmSet 9 }
|
|
|
|
|
|
|
|
psAlarmSet10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC High Worning "
|
|
::= { psAlarmSet 10 }
|
|
|
|
|
|
psAlarmSet11 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Too LOw Lvd Disconnect "
|
|
::= { psAlarmSet 11 }
|
|
|
|
psAlarmSet12 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DC Low Worning "
|
|
::= { psAlarmSet 12 }
|
|
|
|
|
|
|
|
psAlarmSet13 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" LVD Contact Open "
|
|
::= { psAlarmSet 13 }
|
|
|
|
psAlarmSet14 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Load Breaker Open "
|
|
::= { psAlarmSet 14 }
|
|
|
|
psAlarmSet15 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" System Running in Equalizing "
|
|
::= { psAlarmSet 15 }
|
|
|
|
psAlarmSet16 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Last Battery Test Fail "
|
|
::= { psAlarmSet 16 }
|
|
|
|
psAlarmSet17 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psAlarmSet 17 }
|
|
|
|
|
|
|
|
psAlarmSet18 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psAlarmSet 18 }
|
|
|
|
psAlarmSet19 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserve "
|
|
::= { psAlarmSet 19 }
|
|
|
|
psAlarmSet20 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Reserver "
|
|
::= { psAlarmSet 20 }
|
|
|
|
psAlarmSet21 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PD Not Responding "
|
|
::= { psAlarmSet 21 }
|
|
|
|
psAlarmSet22 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Invertor Not Responding "
|
|
::= { psAlarmSet 22 }
|
|
psAlarmSet23 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Rectifier Not Responding "
|
|
::= { psAlarmSet 23 }
|
|
|
|
psAlarmSet24 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Last Self Test Failed "
|
|
::= { psAlarmSet 24 }
|
|
|
|
psAlarmSet25 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Fuse "
|
|
::= { psAlarmSet 25 }
|
|
|
|
psAlarmSet26 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Current Sharing in Rectifier "
|
|
::= { psAlarmSet 26 }
|
|
|
|
|
|
psAlarmSet27 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Output in Rectifier "
|
|
::= { psAlarmSet 27 }
|
|
|
|
psAlarmSet28 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Bad Relay Board "
|
|
::= { psAlarmSet 28 }
|
|
|
|
psAlarmSet29 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Load Current too High "
|
|
::= { psAlarmSet 29 }
|
|
|
|
psAlarmSet30 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Serge Blown "
|
|
::= { psAlarmSet 30 }
|
|
|
|
psAlarmSet31 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Gets Set at Start Up "
|
|
::= { psAlarmSet 31 }
|
|
psAlarmSet32 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Misc Alarm "
|
|
::= { psAlarmSet 32 }
|
|
|
|
|
|
|
|
psAlarmSet33 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 33 }
|
|
psAlarmSet34 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 34 }
|
|
psAlarmSet35 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 35 }
|
|
psAlarmSet36 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 36 }
|
|
psAlarmSet37 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 37 }
|
|
psAlarmSet38 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 38}
|
|
psAlarmSet39 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 39 }
|
|
psAlarmSet40 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 40}
|
|
psAlarmSet41 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 41 }
|
|
psAlarmSet42 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 42 }
|
|
psAlarmSet43 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 43 }
|
|
psAlarmSet44 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 44 }
|
|
psAlarmSet45 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 45 }
|
|
psAlarmSet46 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 46 }
|
|
psAlarmSet47 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 47 }
|
|
psAlarmSet48 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 48 }
|
|
psAlarmSet49 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 49 }
|
|
psAlarmSet50 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 50}
|
|
psAlarmSet51 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 51 }
|
|
psAlarmSet52 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 52 }
|
|
psAlarmSet53 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 53 }
|
|
psAlarmSet54 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 54 }
|
|
psAlarmSet55 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 55 }
|
|
psAlarmSet56 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 56 }
|
|
psAlarmSet57 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 57 }
|
|
psAlarmSet58 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 58 }
|
|
psAlarmSet59 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 59 }
|
|
psAlarmSet60 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 60 }
|
|
psAlarmSet61 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 61 }
|
|
psAlarmSet62 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 62 }
|
|
psAlarmSet63 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 63 }
|
|
|
|
psAlarmSet64 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 64 }
|
|
|
|
psAlarmSet65 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 65 }
|
|
psAlarmSet66 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 66 }
|
|
psAlarmSet67 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 67 }
|
|
psAlarmSet68 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 68 }
|
|
psAlarmSet69 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 69 }
|
|
psAlarmSet70 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 70}
|
|
psAlarmSet71 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 71 }
|
|
psAlarmSet72 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 72}
|
|
psAlarmSet73 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 73 }
|
|
psAlarmSet74 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 74 }
|
|
psAlarmSet75 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 75 }
|
|
psAlarmSet76 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 76 }
|
|
psAlarmSet77 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 77 }
|
|
psAlarmSet78 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 78 }
|
|
psAlarmSet79 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 79 }
|
|
psAlarmSet80 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 80 }
|
|
psAlarmSet81 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 81 }
|
|
psAlarmSet82 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 82}
|
|
psAlarmSet83 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 83 }
|
|
psAlarmSet84 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 84 }
|
|
psAlarmSet85 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 85 }
|
|
psAlarmSet86 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 86 }
|
|
psAlarmSet87 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 87 }
|
|
psAlarmSet88 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 88 }
|
|
psAlarmSet89 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 89 }
|
|
psAlarmSet90 OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 90 }
|
|
psAlarmSet91 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 91 }
|
|
psAlarmSet92 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 92 }
|
|
psAlarmSet93 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 93 }
|
|
psAlarmSet94 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 94 }
|
|
psAlarmSet95 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 95 }
|
|
|
|
psAlarmSet96 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (0),
|
|
disable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare "
|
|
::= { psAlarmSet 96 }
|
|
|
|
|
|
|
|
|
|
|
|
--
|
|
-- Security mib MIB definitions
|
|
--
|
|
|
|
psSecurityComunity1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure comunity "
|
|
::= { psSecurity 1 }
|
|
|
|
psSecurityComunity2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure comunity "
|
|
::= { psSecurity 2 }
|
|
|
|
psSecurityComunity3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure comunity "
|
|
::= { psSecurity 3 }
|
|
|
|
psSecurityPasswordComunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure password for get only comunity comunity "
|
|
::= { psSecurity 4 }
|
|
|
|
psSecurityPasswordSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Password for SNMP set Command"
|
|
::= { psSecurity 5 }
|
|
psSecuritySetGetPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set or Get Password ----- Must match the password set or get in order to use SNMP Set or get Commands"
|
|
::= { psSecurity 6 }
|
|
|
|
psSecurityErasePassword OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset (1),
|
|
dont (0)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Erase Password "
|
|
::= { psSecurity 7 }
|
|
psSecurityTrapIp1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IP Address For Trap "
|
|
::= { psSecurity 8 }
|
|
|
|
psSecurityTrapIp2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IP Address For Trap "
|
|
::= { psSecurity 9 }
|
|
psSecurityTrapIp3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IP Address For Trap "
|
|
::= { psSecurity 10 }
|
|
psSecurityTrapIp4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IP Address For Trap "
|
|
::= { psSecurity 11 }
|
|
psSecurityInterfaceIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" New IP for Interface "
|
|
::= { psSecurity 12 }
|
|
psSecurityInterfaceNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Net Mask "
|
|
::= { psSecurity 13 }
|
|
psSecurityInterfaceGateWay OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IP Address For The Gateway "
|
|
::= { psSecurity 14}
|
|
psSecurityInterfaceActivate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
donot (0),
|
|
activate (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Activate the New IP"
|
|
::= { psSecurity 15}
|
|
|
|
|
|
|
|
|
|
--
|
|
-- Command mib MIB definitions
|
|
-- Set the following Instants in order to: Test Battery , PSU and INU and To activate new software
|
|
psCommandGoFloat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
{
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Go Float "
|
|
::= { psCommand 1 }
|
|
psCommandGoEqualizing OBJECT-TYPE
|
|
SYNTAX INTEGER (4..72)
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Go Equalizing in hours"
|
|
::= { psCommand 2 }
|
|
psCommandDoSelfTest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
{
|
|
no (0),
|
|
yes (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Fo Self Test"
|
|
::= { psCommand 3 }
|
|
|
|
|
|
psCommandRunFlash1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
{
|
|
activate(1),
|
|
dontactivate (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Activate Flash 1 software"
|
|
::= { psCommand 4 }
|
|
psCommandRunFlash2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
{
|
|
activate(1),
|
|
dontactivate (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Activate Flash 2"
|
|
::= { psCommand 5 }
|
|
psCommandTestBatteryAll OBJECT-TYPE
|
|
SYNTAX INTEGER (1..9)
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Test All Battery in hours"
|
|
::= { psCommand 6 }
|
|
|
|
psCommandDoBoot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
{
|
|
do(1),
|
|
dont (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Re Boot the system"
|
|
::= { psCommand 7 }
|
|
|
|
psCommandLoadDefault OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
{
|
|
load(1),
|
|
dontload (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Load default "
|
|
::= { psCommand 8 }
|
|
|
|
psCommandProgramNonActiveFlash OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
load(1),
|
|
dontload (0)
|
|
}
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Copy the down loaded file to non active flash"
|
|
::= { psCommand 9}
|
|
psCommandNonActiveFlash OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Get The non active Flash 1 or 2 "
|
|
::= { psCommand 10 }
|
|
|
|
psCommandNonActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Get The Non Active Flash Status"
|
|
::= { psCommand 11 }
|
|
|
|
|
|
psCommandDownLoadSoftware OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Down Load File"
|
|
::= { psCommand 12 }
|
|
|
|
psCommandDownLoadCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
completeok (0),
|
|
inprogress (1),
|
|
notok1 (2),
|
|
notok2 (3),
|
|
notok3 (4)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Check if down load completed OK"
|
|
::= { psCommand 13 }
|
|
|
|
|
|
psCommandFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" File Name to load"
|
|
::= { psCommand 14 }
|
|
|
|
psCommandIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Ip Address of the server from which to load the file"
|
|
::= { psCommand 15 }
|
|
|
|
psCommandAbortBatTest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
abort (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Abort battery test"
|
|
::= { psCommand 16 }
|
|
psCommandEraseTotalTime OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
erase (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Erase Total Time "
|
|
::= { psCommand 17}
|
|
|
|
psCommandAbortProgramFlash OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" User Define Command "
|
|
::= { psCommand 18}
|
|
|
|
psCommandUserDefine2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" User Define Command "
|
|
::= { psCommand 19}
|
|
psCommandUserDefine3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" User Define Command "
|
|
::= { psCommand 20}
|
|
psCommandUserDefine4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" User Define Command "
|
|
::= { psCommand 21}
|
|
psCommandUserDefine5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" User Define Command "
|
|
::= { psCommand 22}
|
|
|
|
psCommandFlash1Protect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means that flash 1 is read only "
|
|
::= { psCommand 23 }
|
|
|
|
psCommandFlash2Protect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means that flash 2 is read only "
|
|
::= { psCommand 24 }
|
|
|
|
psCommandFlashFix OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means that flash is fix "
|
|
::= { psCommand 25 }
|
|
|
|
psCommandFlashFixNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1Telling wich flah is FIX one or Two "
|
|
::= { psCommand 26 }
|
|
|
|
psCommandRemoteTest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means that Conatctors remote test is active"
|
|
::= { psCommand 27 }
|
|
psCommandControlerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means that The controler is active "
|
|
::= { psCommand 28 }
|
|
|
|
psCommandFirmwareRev OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" firmware revision "
|
|
::= { psCommand 29 }
|
|
|
|
psCommandFlash2SWRev OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (12))
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Flash 2 softwre revision "
|
|
::= { psCommand 30 }
|
|
|
|
psCommandFlash1SWRev OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (12))
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Flash 1 softwre revision "
|
|
::= { psCommand 31 }
|
|
|
|
psCommandMBXSWRev OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (12))
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" MBX softwre revision "
|
|
::= { psCommand 32 }
|
|
|
|
psCommandLeds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Leds -MSB-0 0 0 0 0 0 0 0 23 22 21 20 19 18 17 10 9 1 2 3 4 5 6 7 8 16 15 14 13 12 11 24-LSB "
|
|
::= { psCommand 33 }
|
|
|
|
psCommandProgramingInProcess OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Programing progress status "
|
|
::= { psCommand 34}
|
|
|
|
psCommandLoadUserDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means Load Default"
|
|
::= { psCommand 35 }
|
|
|
|
|
|
psCommandStoreUserDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means Store Default"
|
|
::= { psCommand 36 }
|
|
psCommandLoadUserParameters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means Load Parameters"
|
|
::= { psCommand 37 }
|
|
|
|
psCommandStoreUserParameters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
activate (1)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" 1 means Store Parameters"
|
|
::= { psCommand 38 }
|
|
psCommandDryInStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dry In Status
|
|
bit Property
|
|
32..11 Reserved
|
|
10 Load Critical
|
|
09 Load 24V
|
|
08 LVD #2
|
|
07 User 4
|
|
06 User 3
|
|
05 User 2
|
|
04 User 1
|
|
03 Load 48V
|
|
02 Surge
|
|
01 Batt Fuse
|
|
00 LVD #1
|
|
|
|
"
|
|
::= { psCommand 39}
|
|
|
|
psCommandSpareR0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 40 }
|
|
|
|
psCommandSpareR1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 41 }
|
|
psCommandSpareR2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 42 }
|
|
psCommandSpareR3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 43 }
|
|
psCommandSpareR4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 44 }
|
|
psCommandSpareR5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 45 }
|
|
psCommandSpareR6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 46 }
|
|
psCommandSpareR7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 47 }
|
|
psCommandSpareR8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 48 }
|
|
psCommandSpareR9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 49 }
|
|
psCommandSpareR10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 50 }
|
|
|
|
psCommandSpareW0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 51 }
|
|
|
|
psCommandSpareW1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 52 }
|
|
|
|
psCommandSpareW2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 53 }
|
|
|
|
psCommandSpareW3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 54 }
|
|
|
|
psCommandSpareW4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 55 }
|
|
|
|
psCommandSpareW5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 56 }
|
|
|
|
psCommandSpareW6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 57 }
|
|
psCommandSpareW7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 58 }
|
|
|
|
|
|
|
|
psCommandSpareW8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 59 }
|
|
|
|
psCommandSpareW9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 60 }
|
|
|
|
psCommandSpareW10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 61 }
|
|
|
|
psCommandSpareW11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 62 }
|
|
|
|
psCommandSpareW12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare Command"
|
|
::= { psCommand 63 }
|
|
-- SPARE MIB GROUP
|
|
psSpare1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 1 }
|
|
psSpare2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 2 }
|
|
psSpare3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 3 }
|
|
psSpare4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 4 }
|
|
psSpare5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 5 }
|
|
psSpare6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 6 }
|
|
psSpare7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 7 }
|
|
psSpare8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 8 }
|
|
psSpare9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 9 }
|
|
psSpare10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 10 }
|
|
psSpare11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 11 }
|
|
psSpare12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 12 }
|
|
psSpare13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 13 }
|
|
psSpare14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 14 }
|
|
psSpare15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 15 }
|
|
|
|
psSpare16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 16 }
|
|
psSpare17 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 17 }
|
|
psSpare18 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 18 }
|
|
psSpare19 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 19 }
|
|
psSpare20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 20 }
|
|
psSpare21 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 21 }
|
|
psSpare22 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 22 }
|
|
psSpare23 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 23}
|
|
psSpare24 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 24}
|
|
psSpare25 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 25 }
|
|
psSpare26 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 26 }
|
|
psSpare27 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 27 }
|
|
psSpare28 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 28 }
|
|
psSpare29 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 29 }
|
|
psSpare30 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 30 }
|
|
psSpare31 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 31 }
|
|
psSpare32 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Spare MIB "
|
|
::= { psSpare 32 }
|
|
|
|
|
|
|
|
-- DIAL GROUP
|
|
psDialATDModemSetUp OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" ATD COMMAND For MODEM SET UP
|
|
Example :
|
|
This is default for Cellolar Modem
|
|
ATZ\x0d ATS0=1\x0d AT&D0\x0d AT+IPR=9600\x0d\x00
|
|
|
|
"
|
|
::= { psDial 1 }
|
|
|
|
psDialATDDialOut OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" ATD COMMAND For Dial Out
|
|
|
|
|
|
"
|
|
::= { psDial 2 }
|
|
|
|
psDialOutFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nodialout (0),
|
|
dialout (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dial Out flag
|
|
1 =dial out
|
|
|
|
"
|
|
::= { psDial 3 }
|
|
|
|
psDialOutNumRetries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of retries if dial failed
|
|
|
|
"
|
|
::= { psDial 4 }
|
|
|
|
psDialOutNumRetriesActual OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of actual retries done if dial failed
|
|
|
|
"
|
|
::= { psDial 5 }
|
|
|
|
psDialTimeOutBetweenRetries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "10 Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time out between retries in 10 Seconds units
|
|
|
|
"
|
|
::= { psDial 6 }
|
|
|
|
psDialTimeOutAfterLastSuccess OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "10 Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time out After last success when we have new alarm in Minutes units
|
|
|
|
"
|
|
::= { psDial 7 }
|
|
|
|
psDialTimeOutAfterLastRetryFailed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time out After last retry failed when we have new alarm in Minutes units
|
|
|
|
"
|
|
::= { psDial 8 }
|
|
|
|
-- POWER MAX GROUP
|
|
psPowerPlus1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 1
|
|
|
|
"
|
|
::= { psPowerPlus 1 }
|
|
|
|
psPowerPlus2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 2
|
|
|
|
"
|
|
::= { psPowerPlus 2 }
|
|
|
|
|
|
psPowerPlus3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 3
|
|
|
|
"
|
|
::= { psPowerPlus 3 }
|
|
|
|
psPowerPlus4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 4
|
|
|
|
"
|
|
::= { psPowerPlus 4 }
|
|
|
|
psPowerPlus5 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 5
|
|
|
|
"
|
|
::= { psPowerPlus 5 }
|
|
|
|
psPowerPlus6 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 6
|
|
|
|
"
|
|
::= { psPowerPlus 6 }
|
|
|
|
psPowerPlus7 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 7
|
|
|
|
"
|
|
::= { psPowerPlus 7 }
|
|
|
|
psPowerPlus8 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 8
|
|
|
|
"
|
|
::= { psPowerPlus 8 }
|
|
|
|
psPowerPlus9 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 9
|
|
|
|
"
|
|
::= { psPowerPlus 9 }
|
|
|
|
psPowerPlus10 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 10
|
|
|
|
"
|
|
::= { psPowerPlus 10 }
|
|
|
|
psPowerPlus11 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 11
|
|
|
|
"
|
|
::= { psPowerPlus 11 }
|
|
|
|
|
|
|
|
psPowerPlus12 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 12
|
|
|
|
"
|
|
::= { psPowerPlus 12 }
|
|
|
|
psPowerPlus13 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 13
|
|
|
|
"
|
|
::= { psPowerPlus 13 }
|
|
|
|
psPowerPlus14 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 14
|
|
|
|
"
|
|
::= { psPowerPlus 14 }
|
|
|
|
psPowerPlus15 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Power Plus String 15
|
|
|
|
"
|
|
::= { psPowerPlus 15 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
|
|
END
|
|
|