david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/hp/BLADETYPE2-PHYSICAL-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

4796 lines
130 KiB
Plaintext
Raw Blame History

-- COPYRIGHT NOTICE
-- Copyright (c) Hewlett Packard Company, 2003
-- All rights reserved
--
--
BLADETYPE2-PHYSICAL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, TimeTicks
FROM SNMPv2-SMI
DisplayString, PhysAddress
FROM SNMPv2-TC
BridgeId
FROM BRIDGE-MIB
hpSwitchBladeType2-Mgmt
FROM HP-SWITCH-PL-MIB;
layer2 MODULE-IDENTITY
LAST-UPDATED "200312050000Z" -- 5 December 2003
ORGANIZATION "Hewlett Packard Company "
CONTACT-INFO "customerservice@hp.com"
DESCRIPTION
"The MIB module for the Layer 2 configuration, statistics and
information ."
::= { hpSwitchBladeType2-Mgmt 2 }
-- MIB_INSERT_START
-- ----------------------------------------------------------------------------
-- { INSERT: bt2Physical
-- ----------------------------------------------------------------------------
layer2Configs OBJECT IDENTIFIER ::= { layer2 1 }
layer2Stats OBJECT IDENTIFIER ::= { layer2 2 }
layer2Info OBJECT IDENTIFIER ::= { layer2 3 }
layer2Oper OBJECT IDENTIFIER ::= { layer2 4 }
vlan OBJECT IDENTIFIER ::= { layer2Configs 1 }
trunkgroup OBJECT IDENTIFIER ::= { layer2Configs 2 }
stgCfg OBJECT IDENTIFIER ::= { layer2Configs 3 }
mirroring OBJECT IDENTIFIER ::= { layer2Configs 4 }
mstCfg OBJECT IDENTIFIER ::= { layer2Configs 5 }
lacp OBJECT IDENTIFIER ::= { layer2Configs 6 }
thash OBJECT IDENTIFIER ::= { layer2Configs 7 }
l2GeneralCfg OBJECT IDENTIFIER ::= { layer2Configs 8 }
ufd OBJECT IDENTIFIER ::= { layer2Configs 9 }
-- layer2Configs 10 is being used by failoverCfg in aosFailoverCfg.mib
dot1x OBJECT IDENTIFIER ::= { layer2Configs 11 }
fdb OBJECT IDENTIFIER ::= { layer2Configs 12 }
hotlinksCfg OBJECT IDENTIFIER ::= { layer2Configs 14 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksCfg
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links ON/OFF setting."
::= { hotlinksCfg 1 }
hotlinksNewCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hot Links ON/OFF settings."
::= { hotlinksCfg 2 }
hotlinksCurCfgFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting."
::= { hotlinksCfg 3 }
hotlinksNewCfgFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting."
::= { hotlinksCfg 4 }
hotlinksMaxTriggerEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Hot Links Trigger Table."
::= { hotlinksCfg 5 }
-- } GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------
-- { CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table."
::= { hotlinksCfg 6 }
hotlinksCurCfgTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table."
INDEX { hotlinksCurCfgTriggerId }
::= { hotlinksCurCfgTriggerTable 1 }
HotlinksCurCfgTriggerTableEntry ::= SEQUENCE {
hotlinksCurCfgTriggerId Integer32,
hotlinksCurCfgTriggerState INTEGER,
hotlinksCurCfgTriggerPreemptState INTEGER,
hotlinksCurCfgTriggerFdelay Integer32,
hotlinksCurCfgTriggerMasterPort Integer32,
hotlinksCurCfgTriggerMasterTrunk Integer32,
hotlinksCurCfgTriggerBackupPort Integer32,
hotlinksCurCfgTriggerBackupTrunk Integer32
}
hotlinksCurCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksCurCfgTriggerTableEntry 1 }
hotlinksCurCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Trigger state."
::= { hotlinksCurCfgTriggerTableEntry 2 }
hotlinksCurCfgTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Preemption state."
::= { hotlinksCurCfgTriggerTableEntry 3 }
hotlinksCurCfgTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay setting (in secs)."
::= { hotlinksCurCfgTriggerTableEntry 4 }
hotlinksCurCfgTriggerMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface port number."
::= { hotlinksCurCfgTriggerTableEntry 5 }
hotlinksCurCfgTriggerMasterTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface trunk number."
::= { hotlinksCurCfgTriggerTableEntry 6 }
hotlinksCurCfgTriggerBackupPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface port number."
::= { hotlinksCurCfgTriggerTableEntry 7 }
hotlinksCurCfgTriggerBackupTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface trunk number."
::= { hotlinksCurCfgTriggerTableEntry 8 }
-- } CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
-- { NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
hotlinksNewCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table."
::= { hotlinksCfg 7 }
hotlinksNewCfgTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table."
INDEX { hotlinksNewCfgTriggerId }
::= { hotlinksNewCfgTriggerTable 1 }
HotlinksNewCfgTriggerTableEntry ::= SEQUENCE {
hotlinksNewCfgTriggerId Integer32,
hotlinksNewCfgTriggerState INTEGER,
hotlinksNewCfgTriggerPreemptState INTEGER,
hotlinksNewCfgTriggerFdelay Integer32,
hotlinksNewCfgTriggerMasterPort Integer32,
hotlinksNewCfgTriggerMasterTrunk Integer32,
hotlinksNewCfgTriggerBackupPort Integer32,
hotlinksNewCfgTriggerBackupTrunk Integer32
}
hotlinksNewCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksNewCfgTriggerTableEntry 1 }
hotlinksNewCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Trigger state."
::= { hotlinksNewCfgTriggerTableEntry 2 }
hotlinksNewCfgTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Preemption state."
::= { hotlinksNewCfgTriggerTableEntry 3 }
hotlinksNewCfgTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forward Delay setting (in secs)."
::= { hotlinksNewCfgTriggerTableEntry 4 }
hotlinksNewCfgTriggerMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface port number."
::= { hotlinksNewCfgTriggerTableEntry 5 }
hotlinksNewCfgTriggerMasterTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface trunk number."
::= { hotlinksNewCfgTriggerTableEntry 6 }
hotlinksNewCfgTriggerBackupPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface port number."
::= { hotlinksNewCfgTriggerTableEntry 7 }
hotlinksNewCfgTriggerBackupTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface trunk number."
::= { hotlinksNewCfgTriggerTableEntry 8 }
-- } NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksCfg
-- ----------------------------------------------------------------------------
thashL2 OBJECT IDENTIFIER ::= { thash 1 }
mirrPortMirr OBJECT IDENTIFIER ::= { mirroring 1 }
mstGeneralCfg OBJECT IDENTIFIER ::= { mstCfg 1 }
mstCistCfg OBJECT IDENTIFIER ::= { mstCfg 2 }
ufdGeneralCfg OBJECT IDENTIFIER ::= { ufd 1 }
fdbGeneralCfg OBJECT IDENTIFIER ::= { fdb 1 }
dot1xCurCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 5 }
dot1xNewCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 6 }
fdbStats OBJECT IDENTIFIER ::= { layer2Stats 1 }
stpStats OBJECT IDENTIFIER ::= { layer2Stats 2 }
lacpStats OBJECT IDENTIFIER ::= { layer2Stats 3 }
ufdStats OBJECT IDENTIFIER ::= { layer2Stats 4 }
hotlinksStats OBJECT IDENTIFIER ::= { layer2Stats 6 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksStats
-- ----------------------------------------------------------------------------
hotlinksStatsTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksStatsTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table Stats."
::= { hotlinksStats 1 }
hotlinksStatsTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksStatsTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table Stats."
INDEX { hotlinksStatsTriggerId }
::= { hotlinksStatsTriggerTable 1 }
HotlinksStatsTriggerTableEntry ::= SEQUENCE {
hotlinksStatsTriggerId Integer32,
hotlinksStatsTriggerMasterActive Integer32,
hotlinksStatsTriggerBackupActive Integer32,
hotlinksStatsTriggerFdbUpdate Integer32,
hotlinksStatsTriggerFdbFailed Integer32
}
hotlinksStatsTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksStatsTriggerTableEntry 1 }
hotlinksStatsTriggerMasterActive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the master interface was set to active."
::= { hotlinksStatsTriggerTableEntry 2 }
hotlinksStatsTriggerBackupActive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the backup interface was set to active."
::= { hotlinksStatsTriggerTableEntry 3 }
hotlinksStatsTriggerFdbUpdate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an FDB update was performed."
::= { hotlinksStatsTriggerTableEntry 4 }
hotlinksStatsTriggerFdbFailed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an FDB update failed."
::= { hotlinksStatsTriggerTableEntry 5 }
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksStats
-- ----------------------------------------------------------------------------
cistInfo OBJECT IDENTIFIER ::= { layer2Info 1 }
fdbInfo OBJECT IDENTIFIER ::= { layer2Info 2 }
stpInfo OBJECT IDENTIFIER ::= { layer2Info 3 }
lacpInfo OBJECT IDENTIFIER ::= { layer2Info 4 }
dot1xInfo OBJECT IDENTIFIER ::= { layer2Info 5 }
dot1pInfo OBJECT IDENTIFIER ::= { layer2Info 6 }
genInfo OBJECT IDENTIFIER ::= { layer2Info 7 }
vlanInfo OBJECT IDENTIFIER ::= { layer2Info 8 }
trunkGroupInfo OBJECT IDENTIFIER ::= { layer2Info 9 }
hotlinksInfo OBJECT IDENTIFIER ::= { layer2Info 10 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksInfo
-- ----------------------------------------------------------------------------
hotlinksInfoOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links ON/OFF setting info."
::= { hotlinksInfo 1 }
hotlinksInfoFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting info."
::= { hotlinksInfo 2 }
hotlinksInfoTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksInfoTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table Info."
::= { hotlinksInfo 3 }
hotlinksInfoTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksInfoTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table Info."
INDEX { hotlinksInfoTriggerId }
::= { hotlinksInfoTriggerTable 1 }
HotlinksInfoTriggerTableEntry ::= SEQUENCE {
hotlinksInfoTriggerId Integer32,
hotlinksInfoTriggerState INTEGER,
hotlinksInfoTriggerPreemptState INTEGER,
hotlinksInfoTriggerFdelay Integer32,
hotlinksInfoTriggerActive DisplayString
}
hotlinksInfoTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksInfoTriggerTableEntry 1 }
hotlinksInfoTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Trigger state info."
::= { hotlinksInfoTriggerTableEntry 2 }
hotlinksInfoTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Preemption state info."
::= { hotlinksInfoTriggerTableEntry 3 }
hotlinksInfoTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay setting info (in secs)."
::= { hotlinksInfoTriggerTableEntry 4 }
hotlinksInfoTriggerActive OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the active interface info."
::= { hotlinksInfoTriggerTableEntry 5 }
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksInfo
-- ----------------------------------------------------------------------------
dot1xSystemInfo OBJECT IDENTIFIER ::= { dot1xInfo 2 }
cistGeneralInfo OBJECT IDENTIFIER ::= { cistInfo 1 }
-- VLAN group
vlanMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the VLAN configuration table."
::= { vlan 1 }
vlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 2 }
vlanCurCfgTableEntry OBJECT-TYPE
SYNTAX VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanCurCfgVlanId }
::= { vlanCurCfgTable 1 }
VlanCurCfgTableEntry ::= SEQUENCE {
vlanCurCfgVlanId Integer32,
vlanCurCfgVlanName DisplayString,
vlanCurCfgPorts OCTET STRING,
vlanCurCfgState INTEGER,
vlanCurCfgStg Integer32
}
vlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanCurCfgTableEntry 1 }
vlanCurCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanCurCfgTableEntry 2 }
vlanCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanCurCfgTableEntry 3 }
vlanCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanCurCfgTableEntry 4 }
vlanCurCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanCurCfgTableEntry 6 }
vlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 3 }
vlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanNewCfgVlanId }
::= { vlanNewCfgTable 1 }
VlanNewCfgTableEntry ::= SEQUENCE {
vlanNewCfgVlanId Integer32,
vlanNewCfgVlanName DisplayString,
vlanNewCfgPorts OCTET STRING,
vlanNewCfgState INTEGER,
vlanNewCfgAddPort Integer32,
vlanNewCfgRemovePort Integer32,
vlanNewCfgDelete INTEGER,
vlanNewCfgStg Integer32
}
vlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanNewCfgTableEntry 1 }
vlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanNewCfgTableEntry 2 }
vlanNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanNewCfgTableEntry 3 }
vlanNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanNewCfgTableEntry 4 }
vlanNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 5 }
vlanNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 6 }
vlanNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN"
::= { vlanNewCfgTableEntry 7 }
vlanNewCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanNewCfgTableEntry 9 }
-- Trunk Group Group
trunkGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in trunk group table."
::= { trunkgroup 1 }
trunkGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 2 }
trunkGroupCurCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupCurCfgIndex }
::= { trunkGroupCurCfgTable 1 }
TrunkGroupCurCfgTableEntry ::= SEQUENCE {
trunkGroupCurCfgIndex Integer32,
trunkGroupCurCfgPorts OCTET STRING,
trunkGroupCurCfgState INTEGER
}
trunkGroupCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupCurCfgTableEntry 1 }
trunkGroupCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupCurCfgTableEntry 2 }
trunkGroupCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupCurCfgTableEntry 3 }
trunkGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 3 }
trunkGroupNewCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupNewCfgIndex }
::= { trunkGroupNewCfgTable 1 }
TrunkGroupNewCfgTableEntry ::= SEQUENCE {
trunkGroupNewCfgIndex Integer32,
trunkGroupNewCfgPorts OCTET STRING,
trunkGroupNewCfgAddPort Integer32,
trunkGroupNewCfgRemovePort Integer32,
trunkGroupNewCfgState INTEGER,
trunkGroupNewCfgDelete INTEGER
}
trunkGroupNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupNewCfgTableEntry 1 }
trunkGroupNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupNewCfgTableEntry 2 }
trunkGroupNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the trunk group. When read, 0 is returned."
::= { trunkGroupNewCfgTableEntry 3 }
trunkGroupNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the trunk group. when read, 0
is returned."
::= { trunkGroupNewCfgTableEntry 4 }
trunkGroupNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupNewCfgTableEntry 5 }
trunkGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { trunkGroupNewCfgTableEntry 6 }
-- Trunk hash
l2ThashCurCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { thashL2 1 }
l2ThashNewCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { thashL2 2 }
l2ThashCurCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { thashL2 3 }
l2ThashNewCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { thashL2 4 }
l2ThashCurCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { thashL2 5 }
l2ThashNewCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { thashL2 6 }
l2ThashCurCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { thashL2 7 }
l2ThashNewCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { thashL2 8 }
-- Spanning Tree Group Configuration
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group configuration."
::= { stgCfg 1 }
stgCurCfgTableEntry OBJECT-TYPE
SYNTAX StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgCurCfgIndex }
::= { stgCurCfgTable 1 }
StgCurCfgTableEntry ::= SEQUENCE {
stgCurCfgIndex Integer32,
stgCurCfgState INTEGER,
stgCurCfgVlanBmap1 OCTET STRING, -- obsolete
stgCurCfgVlanBmap2 OCTET STRING, -- obsolete
stgCurCfgPriority INTEGER,
stgCurCfgBrgHelloTime INTEGER,
stgCurCfgBrgForwardDelay INTEGER,
stgCurCfgBrgMaxAge INTEGER,
stgCurCfgAgingTime INTEGER,
stgCurCfgVlanBmap OCTET STRING
}
stgCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgTableEntry 1 }
stgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgCurCfgTableEntry 2 }
stgCurCfgVlanBmap1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgCurCfgTableEntry 3 }
stgCurCfgVlanBmap2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 2057
|| ||
|| ||___ vlan 2056
|| |____ vlan 2055
|| . . .
||_________ vlan 2050
|__________ vlan 2049 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgCurCfgTableEntry 4 }
stgCurCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgCurCfgTableEntry 5 }
stgCurCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 6 }
stgCurCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 7 }
stgCurCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgCurCfgTableEntry 8 }
stgCurCfgAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned
forwarding information."
::= { stgCurCfgTableEntry 9 }
stgCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgCurCfgTableEntry 10 }
stgNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Groups configuration in the new_config."
::= { stgCfg 2 }
stgNewCfgTableEntry OBJECT-TYPE
SYNTAX StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgNewCfgIndex }
::= { stgNewCfgTable 1 }
StgNewCfgTableEntry ::= SEQUENCE {
stgNewCfgIndex Integer32,
stgNewCfgState INTEGER,
stgNewCfgDefaultCfg INTEGER,
stgNewCfgAddVlan Integer32,
stgNewCfgRemoveVlan Integer32,
stgNewCfgVlanBmap1 OCTET STRING, -- obsolete
stgNewCfgVlanBmap2 OCTET STRING, -- obsolete
stgNewCfgPriority INTEGER,
stgNewCfgBrgHelloTime INTEGER,
stgNewCfgBrgForwardDelay INTEGER,
stgNewCfgBrgMaxAge INTEGER,
stgNewCfgAgingTime INTEGER,
stgNewCfgVlanBmap OCTET STRING
}
stgNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgTableEntry 1 }
stgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgNewCfgTableEntry 2 }
stgNewCfgDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything."
::= { stgNewCfgTableEntry 3 }
stgNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read."
::= {stgNewCfgTableEntry 4 }
stgNewCfgRemoveVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read."
::= { stgNewCfgTableEntry 5 }
stgNewCfgVlanBmap1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgNewCfgTableEntry 6 }
stgNewCfgVlanBmap2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 2057
|| ||
|| ||___ vlan 2056
|| |____ vlan 2055
|| . . .
||_________ vlan 2050
|__________ vlan 2049 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgNewCfgTableEntry 7 }
stgNewCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgNewCfgTableEntry 8 }
stgNewCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 9 }
stgNewCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 10 }
stgNewCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgNewCfgTableEntry 11 }
stgNewCfgAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned
forwarding information."
::= { stgNewCfgTableEntry 12 }
stgNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgNewCfgTableEntry 13 }
stgCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
current_config."
::= { stgCfg 3 }
stgCurCfgPortTableEntry OBJECT-TYPE
SYNTAX StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
::= { stgCurCfgPortTable 1 }
StgCurCfgPortTableEntry ::= SEQUENCE {
stgCurCfgStgIndex Integer32,
stgCurCfgPortIndex Integer32,
stgCurCfgPortState INTEGER,
stgCurCfgPortPriority INTEGER,
stgCurCfgPortPathCost INTEGER,
stgCurCfgPortLink INTEGER,
stgCurCfgPortEdge INTEGER,
stgCurCfgPortFastFwd INTEGER
}
stgCurCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgPortTableEntry 1 }
stgCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgCurCfgPortTableEntry 2 }
stgCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgCurCfgPortTableEntry 3 }
stgCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgCurCfgPortTableEntry 4 }
stgCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port."
::= { stgCurCfgPortTableEntry 5 }
stgCurCfgPortLink OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the port link."
::= { stgCurCfgPortTableEntry 6 }
stgCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port edge."
::= { stgCurCfgPortTableEntry 7 }
stgCurCfgPortFastFwd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port fast forwarding."
::= { stgCurCfgPortTableEntry 8 }
stgNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
new_config."
::= { stgCfg 4 }
stgNewCfgPortTableEntry OBJECT-TYPE
SYNTAX StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
::= { stgNewCfgPortTable 1 }
StgNewCfgPortTableEntry ::= SEQUENCE {
stgNewCfgStgIndex Integer32,
stgNewCfgPortIndex Integer32,
stgNewCfgPortState INTEGER,
stgNewCfgPortPriority INTEGER,
stgNewCfgPortPathCost INTEGER,
stgNewCfgPortLink INTEGER,
stgNewCfgPortEdge INTEGER,
stgNewCfgPortFastFwd INTEGER
}
stgNewCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgPortTableEntry 1 }
stgNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgNewCfgPortTableEntry 2 }
stgNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgNewCfgPortTableEntry 3 }
stgNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgNewCfgPortTableEntry 4 }
stgNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port."
::= { stgNewCfgPortTableEntry 5 }
stgNewCfgPortLink OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the port link."
::= { stgNewCfgPortTableEntry 6 }
stgNewCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port edge."
::= { stgNewCfgPortTableEntry 7 }
stgNewCfgPortFastFwd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port fast forwarding."
::= { stgNewCfgPortTableEntry 8 }
-- MST Configuration
mstCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable MSTP/RSTP"
::= { mstGeneralCfg 1 }
mstNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable MSTP/RSTP"
::= { mstGeneralCfg 2 }
mstCurCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 3 }
mstNewCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 4 }
mstCurCfgRegionVersion OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstGeneralCfg 5 }
mstNewCfgRegionVersion OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstGeneralCfg 6 }
mstCurCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 7 }
mstNewCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 8 }
mstCurCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 9 }
mstNewCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 10 }
mstCistDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything."
::= { mstCistCfg 1 }
-- CIST Brige Configuration
mstCistBridgeCfg OBJECT IDENTIFIER ::= { mstCistCfg 2 }
mstCistCurCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 1 }
mstCistNewCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 2 }
mstCistCurCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 5 }
mstCistNewCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 6 }
mstCistCurCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 7 }
mstCistNewCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 8 }
mstCistCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 9 }
mstCistNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 10 }
mstCistNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be added to the CIST Group. A
'0' value is returned when read."
::= { mstCistBridgeCfg 11 }
-- CIST Port Configuration
mstCistCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 3 }
mstCistCurCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistCurCfgPortIndex }
::= { mstCistCurCfgPortTable 1 }
MstCistCurCfgPortTableEntry ::= SEQUENCE {
mstCistCurCfgPortIndex Integer32,
mstCistCurCfgPortPriority INTEGER,
mstCistCurCfgPortPathCost INTEGER,
mstCistCurCfgPortLinkType INTEGER,
mstCistCurCfgPortEdge INTEGER,
mstCistCurCfgPortStpState INTEGER,
mstCistCurCfgPortHelloTime INTEGER
}
mstCistCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistCurCfgPortTableEntry 1 }
mstCistCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistCurCfgPortTableEntry 2 }
mstCistCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistCurCfgPortTableEntry 3 }
mstCistCurCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { mstCistCurCfgPortTableEntry 4 }
mstCistCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Edge Port parameter."
::= { mstCistCurCfgPortTableEntry 5 }
mstCistCurCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistCurCfgPortTableEntry 6 }
mstCistCurCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistCurCfgPortTableEntry 7 }
mstCistNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 4 }
mstCistNewCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistNewCfgPortIndex }
::= { mstCistNewCfgPortTable 1 }
MstCistNewCfgPortTableEntry ::= SEQUENCE {
mstCistNewCfgPortIndex Integer32,
mstCistNewCfgPortPriority INTEGER,
mstCistNewCfgPortPathCost INTEGER,
mstCistNewCfgPortLinkType INTEGER,
mstCistNewCfgPortEdge INTEGER,
mstCistNewCfgPortStpState INTEGER,
mstCistNewCfgPortHelloTime INTEGER
}
mstCistNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistNewCfgPortTableEntry 1 }
mstCistNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistNewCfgPortTableEntry 2 }
mstCistNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistNewCfgPortTableEntry 3 }
mstCistNewCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { mstCistNewCfgPortTableEntry 4 }
mstCistNewCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the Edge Port parameter."
::= { mstCistNewCfgPortTableEntry 5 }
mstCistNewCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistNewCfgPortTableEntry 6 }
mstCistNewCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistNewCfgPortTableEntry 7 }
-- Complete Port Mirroring
pmCurCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 1 }
pmNewCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 2 }
pmCurCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 3 }
pmCurCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
::= { pmCurCfgPortMonitorTable 1 }
PmCurCfgPortMonitorEntry ::= SEQUENCE {
pmCurCfgPmirrMoniPortIndex Integer32,
pmCurCfgPmirrMirrPortIndex Integer32,
pmCurCfgPmirrDirection INTEGER
}
pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmCurCfgPortMonitorEntry 1 }
pmCurCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmCurCfgPortMonitorEntry 2 }
pmCurCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmCurCfgPortMonitorEntry 3 }
pmNewCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 4 }
pmNewCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
::= { pmNewCfgPortMonitorTable 1 }
PmNewCfgPortMonitorEntry ::= SEQUENCE {
pmNewCfgPmirrMoniPortIndex Integer32,
pmNewCfgPmirrMirrPortIndex Integer32,
pmNewCfgPmirrDirection INTEGER,
pmNewCfgPmirrDelete INTEGER,
pmNewCfgPmonDelete INTEGER
}
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmNewCfgPortMonitorEntry 1 }
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmNewCfgPortMonitorEntry 2 }
pmNewCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmNewCfgPortMonitorEntry 3 }
pmNewCfgPmirrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 4 }
pmNewCfgPmonDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 10 }
-- Link Aggregation Control Protocol Group
lacpCurSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 1 }
lacpNewSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 2 }
lacpCurSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 5 }
lacpNewSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 6 }
lacpCurPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 7 }
lacpCurPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpCurPortCfgTableId }
::= { lacpCurPortCfgTable 1 }
LacpCurPortCfgTableEntry ::= SEQUENCE {
lacpCurPortCfgTableId Integer32,
lacpCurPortState INTEGER,
lacpCurPortActorPortPriority INTEGER,
lacpCurPortActorAdminKey INTEGER
}
lacpCurPortCfgTableId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpCurPortCfgTableEntry 1 }
lacpCurPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpCurPortCfgTableEntry 2 }
lacpCurPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-only."
::= { lacpCurPortCfgTableEntry 3 }
lacpCurPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance."
::= { lacpCurPortCfgTableEntry 4 }
lacpNewPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 8 }
lacpNewPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpNewPortCfgTableId }
::= { lacpNewPortCfgTable 1 }
LacpNewPortCfgTableEntry ::= SEQUENCE {
lacpNewPortCfgTableId Integer32,
lacpNewPortState INTEGER,
lacpNewPortActorPortPriority INTEGER,
lacpNewPortActorAdminKey INTEGER
}
lacpNewPortCfgTableId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpNewPortCfgTableEntry 1 }
lacpNewPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpNewPortCfgTableEntry 2 }
lacpNewPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { lacpNewPortCfgTableEntry 3 }
lacpNewPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance."
::= { lacpNewPortCfgTableEntry 4 }
-- L2 general
upfastCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable uplink fast"
::= { l2GeneralCfg 1 }
upfastNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable uplink fast"
::= { l2GeneralCfg 2 }
updateCurCfgState OBJECT-TYPE
SYNTAX INTEGER (10..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UplinkFast station update rate: packets per second"
::= { l2GeneralCfg 3 }
updateNewCfgState OBJECT-TYPE
SYNTAX INTEGER (10..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UplinkFast station update rate: packets per second"
::= { l2GeneralCfg 4 }
-- FDB Statistics
fdbStatsCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries created in the Forwarding Database."
::= { fdbStats 1 }
fdbStatsDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries deleted from the Forwarding Database."
::= { fdbStats 2 }
fdbStatsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the Forwarding Database."
::= { fdbStats 3 }
fdbStatsHiwat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest number of entries recorded at any given time in the
Forwarding Database."
::= { fdbStats 4 }
fdbStatsLookups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entry lookups in the Forwarding Database."
::= { fdbStats 5 }
fdbStatsLookupFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unsuccessful searches made in the Forwarding Database."
::= { fdbStats 6 }
fdbStatsFinds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of searches in the Forwarding Database."
::= { fdbStats 7 }
fdbStatsFindFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of search failures in the Forwarding Database."
::= { fdbStats 8 }
fdbStatsFindOrCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries found or created in the Forwarding Database."
::= { fdbStats 9 }
fdbStatsOverflows OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries overflowing the Forwarding Database."
::= { fdbStats 10 }
-- STP Statistics
stgStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port statistics."
::= { stpStats 1 }
stgStatsPortTableEntry OBJECT-TYPE
SYNTAX StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about port of a particular Spanning Tree Group."
INDEX { stgStatsStpIndex, stgStatsPortIndex }
::= { stgStatsPortTable 1 }
StgStatsPortTableEntry ::= SEQUENCE {
stgStatsStpIndex Integer32,
stgStatsPortIndex Integer32,
stgStatsPortRcvCfgBpdus Counter32,
stgStatsPortRcvTcnBpdus Counter32,
stgStatsPortXmtCfgBpdus Counter32,
stgStatsPortXmtTcnBpdus Counter32
}
stgStatsStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 1 }
stgStatsPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 2 }
stgStatsPortRcvCfgBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's received on this port."
::= { stgStatsPortTableEntry 3 }
stgStatsPortRcvTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's received on this port."
::= { stgStatsPortTableEntry 4 }
stgStatsPortXmtCfgBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 5 }
stgStatsPortXmtTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 6 }
-- LACP Statistics
lacpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP Stats."
::= {lacpStats 1}
lacpStatsTableEntry OBJECT-TYPE
SYNTAX LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lacp status info."
INDEX { lacpStatsIndex }
::= { lacpStatsTable 1 }
LacpStatsTableEntry ::= SEQUENCE {
lacpStatsIndex Integer32,
lacpdusRx Integer32,
markerpdusRx Integer32,
markerresponsepdusRx Integer32,
unknownRx Integer32,
illegalRx Integer32,
lacpdusTx Integer32,
markerpdusTx Integer32,
markerresponsepdusTx Integer32
}
lacpStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index"
::= {lacpStatsTableEntry 1}
lacpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid LACPDUs received"
::= {lacpStatsTableEntry 2}
markerpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker PDUs received"
::= {lacpStatsTableEntry 3}
markerresponsepdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker Rsp PDUs received"
::= {lacpStatsTableEntry 4}
unknownRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown version/TLV type"
::= {lacpStatsTableEntry 5}
illegalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Illegal subtype received"
::= {lacpStatsTableEntry 6}
lacpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACPDUs transmitted"
::= {lacpStatsTableEntry 7}
markerpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Market PDUs transmitted"
::= {lacpStatsTableEntry 8}
markerresponsepdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Marker Rsp PDUs transmitted "
::= {lacpStatsTableEntry 9}
-- UFD stats
ufdNoLtMLinkFailure OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 1}
ufdNoLtMLinkBlockingState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 2}
ufdNoLtDAutoDisabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 3}
-- FDB stats
fdbClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the entire master FDB."
::= { fdbInfo 1 }
fdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { fdbInfo 2 }
fdbEntry OBJECT-TYPE
SYNTAX FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { fdbMacAddr }
::= { fdbTable 1 }
FdbEntry ::= SEQUENCE {
fdbMacAddr PhysAddress,
fdbVlan Integer32,
fdbSrcPort Integer32,
fdbSrcTrunk Integer32,
fdbState INTEGER,
fdbRefSps DisplayString,
fdbLearnedPort Integer32
}
fdbMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { fdbEntry 1 }
fdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { fdbEntry 2 }
fdbSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 3 }
fdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ignore(2),
forward(3),
flood(4),
ffd(5),
trunk(6),
vir(7),
vsr(8),
vpr(9),
other(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(3) : the MAC address has been learned by the switch
flood(4) : the MAC address is a multicast destination address
trunk(6) : frames with this MAC address are forwarded to trunk
group
vir(7) : frames with this MAC address are forwarded for L3
processing"
::= { fdbEntry 4 }
fdbRefSps OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The referenced SPs associated with this FDB entry."
::= { fdbEntry 5 }
fdbLearnedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The learned port associated with this FDB entry."
::= { fdbEntry 6 }
fdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { fdbEntry 7 }
-- STP information
stpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group information."
::= { stpInfo 1 }
stpInfoTableEntry OBJECT-TYPE
SYNTAX StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group."
INDEX { stpInfoIndex }
::= { stpInfoTable 1 }
StpInfoTableEntry ::= SEQUENCE {
stpInfoIndex Integer32,
stpInfoState INTEGER,
stgInfoVlanBmap OCTET STRING,
stpInfoTimeSinceTopChange TimeTicks,
stpInfoTopChanges Counter32,
stpInfoDesignatedRoot BridgeId,
stpInfoRootCost Integer32,
stpInfoRootPort Integer32,
stpInfoHelloTime Integer32,
stpInfoMaxAge Integer32,
stpInfoForwardDelay Integer32,
stpInfoHoldTime Integer32,
stpInfoBrgPriority INTEGER,
stpInfoBrgHelloTime INTEGER,
stpInfoBrgForwardDelay INTEGER,
stpInfoBrgMaxAge INTEGER,
stpInfoAgingTime INTEGER
}
stpInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stpInfoTableEntry 1 }
stpInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stpInfoTableEntry 2 }
stgInfoVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stpInfoTableEntry 3 }
stpInfoTimeSinceTopChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity."
::= { stpInfoTableEntry 4 }
stpInfoTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by this bridge since
the management entity was last reset or initialized."
::= { stpInfoTableEntry 5 }
stpInfoDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node."
::= { stpInfoTableEntry 6 }
stpInfoRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { stpInfoTableEntry 7 }
stpInfoRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the lowest cost path from
this bridge to the root bridge."
::= { stpInfoTableEntry 8 }
stpInfoMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using."
::= { stpInfoTableEntry 9 }
stpInfoHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using."
::= { stpInfoTableEntry 10 }
stpInfoForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database."
::= { stpInfoTableEntry 11 }
stpInfoHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second."
::= { stpInfoTableEntry 12 }
stpInfoBrgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stpInfoTableEntry 13 }
stpInfoBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stpInfoTableEntry 14 }
stpInfoBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stpInfoTableEntry 15 }
stpInfoBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stpInfoTableEntry 16 }
stpInfoAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned
forwarding information."
::= { stpInfoTableEntry 17 }
stpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port information."
::= { stpInfo 2 }
stpInfoPortTableEntry OBJECT-TYPE
SYNTAX StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration for a particular Spanning Tree
Group."
INDEX { stpInfoPortStpIndex, stpInfoPortIndex }
::= { stpInfoPortTable 1 }
StpInfoPortTableEntry ::= SEQUENCE {
stpInfoPortStpIndex Integer32,
stpInfoPortIndex Integer32,
stpInfoPortState INTEGER,
stpInfoPortDesignatedRoot BridgeId,
stpInfoPortDesignatedCost Integer32,
stpInfoPortDesignatedBridge BridgeId,
stpInfoPortDesignatedPort OCTET STRING,
stpInfoPortForwardTransitions Counter32,
stpInfoPortPathCost Integer32
}
stpInfoPortStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 1 }
stpInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 2 }
stpInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1)."
::= { stpInfoPortTableEntry 3 }
stpInfoPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached."
::= { stpInfoPortTableEntry 4 }
stpInfoPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs."
::= { stpInfoPortTableEntry 5 }
stpInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment."
::= { stpInfoPortTableEntry 6 }
stpInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated Bridge for this
port's segment."
::= { stpInfoPortTableEntry 7 }
stpInfoPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned from the Learning
state to the Forwarding state."
::= { stpInfoPortTableEntry 8 }
stpInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the port."
::= { stpInfoPortTableEntry 9 }
-- CIST Information
cistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 1 }
cistRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the CIST Root as seen from this bridge."
::= { cistGeneralInfo 2 }
cistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge."
::= { cistGeneralInfo 3 }
cistRootHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs in seconds."
::= { cistGeneralInfo 4 }
cistRootMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 5 }
cistRootForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 6 }
cistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 7 }
cistRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root as seen from this
bridge."
::= { cistGeneralInfo 8 }
cistBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { cistGeneralInfo 9 }
cistBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 10 }
cistBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 11 }
cistMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { cistGeneralInfo 12 }
mstpDigest OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The digest of the mstp."
::= { cistGeneralInfo 13 }
-- CIST Port Information Table
cistInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port information."
::= { cistInfo 2 }
cistInfoPortTableEntry OBJECT-TYPE
SYNTAX CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port."
INDEX { cistInfoPortIndex }
::= { cistInfoPortTable 1 }
CistInfoPortTableEntry ::= SEQUENCE {
cistInfoPortIndex Integer32,
cistInfoPortPriority Integer32,
cistInfoPortPathCost Integer32,
cistInfoPortState INTEGER,
cistInfoPortRole INTEGER,
cistInfoPortDesignatedBridge BridgeId,
cistInfoPortDesignatedPort OCTET STRING,
cistInfoPortLinkType INTEGER,
cistInfoPortHelloTime INTEGER
}
cistInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { cistInfoPortTableEntry 1 }
cistInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { cistInfoPortTableEntry 2 }
cistInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { cistInfoPortTableEntry 3 }
cistInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { cistInfoPortTableEntry 4 }
cistInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning tree instance."
::= { cistInfoPortTableEntry 5 }
cistInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { cistInfoPortTableEntry 6 }
cistInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { cistInfoPortTableEntry 7 }
cistInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port is being treated as
having a shared media connection."
::= { cistInfoPortTableEntry 8 }
cistInfoPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { cistInfoPortTableEntry 9 }
-- LACP information
lacpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port information."
::= { lacpInfo 1 }
lacpInfoPortTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a LACP port."
INDEX { lacpInfoPortIndex }
::= { lacpInfoPortTable 1 }
LacpInfoPortTableEntry ::= SEQUENCE {
lacpInfoPortIndex Integer32,
lacpInfoPortSelected INTEGER,
lacpInfoPortNtt INTEGER,
lacpInfoPortReadyN INTEGER,
lacpInfoPortMoved INTEGER
}
lacpInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortTableEntry 1 }
lacpInfoPortSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently precent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition."
::= { lacpInfoPortTableEntry 2 }
lacpInfoPortNtt OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link."
::= { lacpInfoPortTableEntry 3 }
lacpInfoPortReadyN OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port."
::= { lacpInfoPortTableEntry 4 }
lacpInfoPortMoved OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port."
::= { lacpInfoPortTableEntry 5 }
-- UFD
ufdCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UFD state"
::= { ufdGeneralCfg 1 }
ufdNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UFD state"
::= { ufdGeneralCfg 2 }
ufdCurCfgLtMPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM"
::= { ufdGeneralCfg 3 }
ufdNewCfgLtMPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM"
::= { ufdGeneralCfg 4 }
ufdCurCfgLtMTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM"
::= { ufdGeneralCfg 5 }
ufdNewCfgLtMTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM"
::= { ufdGeneralCfg 6 }
ufdCurCfgLtDPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD"
::= { ufdGeneralCfg 7 }
ufdNewCfgLtDPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD"
::= { ufdGeneralCfg 8 }
ufdCurCfgLtDTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD"
::= { ufdGeneralCfg 9 }
ufdNewCfgLtDTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD"
::= { ufdGeneralCfg 10 }
ufdNewCfgAddLtMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 11 }
ufdNewCfgRemoveLtMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 12 }
ufdNewCfgAddLtMTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 13 }
ufdNewCfgRemoveLtMTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 14 }
ufdNewCfgAddLtDPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to LtD. A '0' value is
returned when read."
::= { ufdGeneralCfg 15}
ufdNewCfgRemoveLtDPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 16 }
ufdNewCfgAddLtDTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 17 }
ufdNewCfgRemoveLtDTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be removed from LtD. A '0'
value is returned when read."
::= { ufdGeneralCfg 18 }
ufdCurCfgGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current global Failover settings."
::= { ufdGeneralCfg 19 }
ufdNewCfgGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New global Failover settings."
::= { ufdGeneralCfg 20 }
--dot1x
dot1xCurStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 1 }
dot1xNewStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 2 }
dot1xCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the Current_config."
::= { dot1x 3 }
dot1xCurCfgPortEntry OBJECT-TYPE
SYNTAX Dot1xCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xCurCfgPortIndex }
::= { dot1xCurCfgPortTable 1 }
Dot1xCurCfgPortEntry ::= SEQUENCE {
dot1xCurCfgPortIndex Integer32,
dot1xCurCfgPortMode INTEGER,
dot1xCurCfgPortQtPeriod INTEGER,
dot1xCurCfgPortTxPeriod INTEGER,
dot1xCurCfgPortSupTmout INTEGER,
dot1xCurCfgPortSrvTmout INTEGER,
dot1xCurCfgPortMaxRq INTEGER,
dot1xCurCfgPortRaPeriod INTEGER,
dot1xCurCfgPortReAuth INTEGER
}
dot1xCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xCurCfgPortEntry 1}
dot1xCurCfgPortMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
"
::= { dot1xCurCfgPortEntry 2 }
dot1xCurCfgPortQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Quiet period (0-65535) "
::= { dot1xCurCfgPortEntry 3 }
dot1xCurCfgPortTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Tx Period "
::= { dot1xCurCfgPortEntry 4 }
dot1xCurCfgPortSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Supplicant timeout (1..65535) "
::= { dot1xCurCfgPortEntry 5 }
dot1xCurCfgPortSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xCurCfgPortEntry 6 }
dot1xCurCfgPortMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Maximum numer of requests (1..10) "
::= { dot1xCurCfgPortEntry 7 }
dot1xCurCfgPortRaPeriod OBJECT-TYPE
SYNTAX INTEGER (0..604800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reautentication period (0..604800) "
::= { dot1xCurCfgPortEntry 8 }
dot1xCurCfgPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ReAuthentication state
off(0),
on(1)
"
::= { dot1xCurCfgPortEntry 9 }
dot1xNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the new_config."
::= { dot1x 4 }
dot1xNewCfgPortEntry OBJECT-TYPE
SYNTAX Dot1xNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xNewCfgPortIndex }
::= { dot1xNewCfgPortTable 1 }
Dot1xNewCfgPortEntry ::= SEQUENCE {
dot1xNewCfgPortIndex Integer32,
dot1xNewCfgPortMode INTEGER,
dot1xNewCfgPortQtPeriod INTEGER,
dot1xNewCfgPortTxPeriod INTEGER,
dot1xNewCfgPortSupTmout INTEGER,
dot1xNewCfgPortSrvTmout INTEGER,
dot1xNewCfgPortMaxRq INTEGER,
dot1xNewCfgPortRaPeriod INTEGER,
dot1xNewCfgPortReAuth INTEGER ,
dot1xNewCfgPortDefault INTEGER ,
dot1xNewCfgPortApplyGlobal INTEGER
}
dot1xNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xNewCfgPortEntry 1}
dot1xNewCfgPortMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2) "
::= { dot1xNewCfgPortEntry 2 }
dot1xNewCfgPortQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Quiet period (0..65535) "
::= { dot1xNewCfgPortEntry 3 }
dot1xNewCfgPortTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgPortEntry 4 }
dot1xNewCfgPortSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Supplicant Timeout (1..65535) "
::= { dot1xNewCfgPortEntry 5 }
dot1xNewCfgPortSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Server Timeout (1..65535) "
::= { dot1xNewCfgPortEntry 6 }
dot1xNewCfgPortMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgPortEntry 7 }
dot1xNewCfgPortRaPeriod OBJECT-TYPE
SYNTAX INTEGER (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgPortEntry 8 }
dot1xNewCfgPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication state
off(0),
on(1) "
::= { dot1xNewCfgPortEntry 9 }
dot1xNewCfgPortDefault OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Port default settings "
::= { dot1xNewCfgPortEntry 10 }
dot1xNewCfgPortApplyGlobal OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Apply Global config "
::= { dot1xNewCfgPortEntry 11 }
dot1xCurCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Autehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2) "
::= { dot1xCurCfgGlobalTable 1 }
dot1xCurCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Quiet period (0..65535) "
::= { dot1xCurCfgGlobalTable 2 }
dot1xCurCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Tx period (1..65535) "
::= { dot1xCurCfgGlobalTable 3 }
dot1xCurCfgGlobalSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Supplicant timeout (1..65535) "
::= { dot1xCurCfgGlobalTable 4 }
dot1xCurCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xCurCfgGlobalTable 5 }
dot1xCurCfgGlobalMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xCurCfgGlobalTable 6 }
dot1xCurCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX INTEGER (0..604800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reauthentication period (0..604800) "
::= { dot1xCurCfgGlobalTable 7 }
dot1xCurCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { dot1xCurCfgGlobalTable 8 }
dot1xNewCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Authentication Mode "
::= { dot1xNewCfgGlobalTable 1 }
dot1xNewCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Quiet Period (0..65535) "
::= { dot1xNewCfgGlobalTable 2 }
dot1xNewCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgGlobalTable 3 }
dot1xNewCfgGlobalSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Supplicand timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 4 }
dot1xNewCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 5 }
dot1xNewCfgGlobalMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgGlobalTable 6 }
dot1xNewCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX INTEGER (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgGlobalTable 7 }
dot1xNewCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication status "
::= { dot1xNewCfgGlobalTable 8 }
dot1xInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the Current_config."
::= { dot1xInfo 1 }
dot1xInfoPortEntry OBJECT-TYPE
SYNTAX Dot1xInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xInfoPortIndex }
::= { dot1xInfoPortTable 1 }
Dot1xInfoPortEntry ::= SEQUENCE {
dot1xInfoPortIndex Integer32,
dot1xInfoPortAuthMode INTEGER,
dot1xInfoPortAuthStatus INTEGER,
dot1xInfoPortCtrlDir INTEGER,
dot1xInfoPortAuthPAEState INTEGER,
dot1xInfoPortBackAuthState INTEGER
}
dot1xInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xInfoPortEntry 1}
dot1xInfoPortAuthMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authentication mode "
::= { dot1xInfoPortEntry 2 }
dot1xInfoPortAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
authorized(0),
unauthorized(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authentication status "
::= { dot1xInfoPortEntry 3 }
dot1xInfoPortCtrlDir OBJECT-TYPE
SYNTAX INTEGER {
both(0),
in(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Controlled Directions "
::= { dot1xInfoPortEntry 4 }
dot1xInfoPortAuthPAEState OBJECT-TYPE
SYNTAX INTEGER {
initialize(0),
disconnected(1),
connecting(2),
authenticating(3),
authenticated(4),
aborting(5),
held(6),
forceauth(7),
forceunauth(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authenticator PAE State "
::= { dot1xInfoPortEntry 5 }
dot1xInfoPortBackAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(0),
response(1),
success(2),
fail(3),
timeout(4),
idle(5),
initialize(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Backend authenticator PAE state "
::= { dot1xInfoPortEntry 6 }
dot1xSystemCapability OBJECT-TYPE
SYNTAX INTEGER {
authenticator(0),
supplicant(1),
authenticatorAndSupplicant(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System capability "
::= { dot1xSystemInfo 1 }
dot1xSystemStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System status "
::= { dot1xSystemInfo 2 }
dot1xSystemProtoVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Protocol version "
::= { dot1xSystemInfo 3 }
-- FDB
fdbCurCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fdb current aging time"
::= { fdbGeneralCfg 1 }
fdbNewCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb new aging time."
::= { fdbGeneralCfg 2 }
fdbNewCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 2 }
fdbNewCfgStaticEntry OBJECT-TYPE
SYNTAX FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbNewCfgEntryIndex }
::= { fdbNewCfgStaticTable 1 }
FdbNewCfgStaticEntry ::= SEQUENCE {
fdbNewCfgEntryIndex Integer32,
fdbNewCfgAddVlan Integer32,
fdbNewCfgAddPort Integer32,
fdbNewCfgAddMac PhysAddress,
fdbNewCfgDelStaticEntry INTEGER
}
fdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbNewCfgStaticEntry 1 }
fdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbNewCfgStaticEntry 2 }
fdbNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbNewCfgStaticEntry 3 }
fdbNewCfgAddMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add a fdb entry."
::= { fdbNewCfgStaticEntry 4 }
fdbNewCfgDelStaticEntry OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { fdbNewCfgStaticEntry 5 }
-- 802.1p Information
dot1pInfoPriorityCOSTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1pInfoPriorityCOSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current priority to COS queue information."
::= { dot1pInfo 1 }
dot1pInfoPriorityCOSEntry OBJECT-TYPE
SYNTAX Dot1pInfoPriorityCOSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about 8021p priority to COS queue."
INDEX { dot1pInfoPriorityIndex }
::= { dot1pInfoPriorityCOSTable 1 }
Dot1pInfoPriorityCOSEntry ::= SEQUENCE {
dot1pInfoPriorityIndex INTEGER,
dot1pInfoPriorityCOSQueue INTEGER,
dot1pInfoPriorityCOSWeight INTEGER
}
dot1pInfoPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p priority for which the table is related."
::= { dot1pInfoPriorityCOSEntry 1 }
dot1pInfoPriorityCOSQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p priority COSq."
::= { dot1pInfoPriorityCOSEntry 2 }
dot1pInfoPriorityCOSWeight OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p priority weight."
::= { dot1pInfoPriorityCOSEntry 3 }
dot1pInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1pInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021p port priority configuration
in the Current_config."
::= { dot1pInfo 2 }
dot1pInfoPortEntry OBJECT-TYPE
SYNTAX Dot1pInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021p Port Priority"
INDEX { dot1pInfoPortIndex }
::= { dot1pInfoPortTable 1 }
Dot1pInfoPortEntry ::= SEQUENCE {
dot1pInfoPortIndex Integer32,
dot1pInfoPortPriority INTEGER,
dot1pInfoPortCOSq INTEGER,
dot1pInfoPortWeight INTEGER
}
dot1pInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p Port number for which the table is related."
::= { dot1pInfoPortEntry 1 }
dot1pInfoPortPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p Port number for which the table is related."
::= { dot1pInfoPortEntry 2 }
dot1pInfoPortCOSq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p port COSq."
::= { dot1pInfoPortEntry 3 }
dot1pInfoPortWeight OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p port weight."
::= { dot1pInfoPortEntry 4 }
-- General Information
generalInfoStpUplinkFast OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP uplink fast mode"
::= { genInfo 1 }
generalInfoUplinkFastRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP fast uplink rate."
::= { genInfo 2 }
-- VLAN information
vlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN information."
::= { vlanInfo 1 }
vlanInfoTableEntry OBJECT-TYPE
SYNTAX VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular VLAN."
INDEX { vlanInfoId }
::= { vlanInfoTable 1 }
VlanInfoTableEntry ::= SEQUENCE {
vlanInfoId INTEGER,
vlanInfoName DisplayString,
vlanInfoStatus INTEGER,
vlanInfoPorts OCTET STRING
}
vlanInfoId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanInfoTableEntry 1 }
vlanInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanInfoTableEntry 2 }
vlanInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable, VLAN state information"
::= { vlanInfoTableEntry 3 }
vlanInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanInfoTableEntry 4 }
-- Trunk Group Information
trunkGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group information."
::= { trunkGroupInfo 1 }
trunkGroupInfoTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in trunk group information table."
INDEX { trunkGroupInfoIndex }
::= { trunkGroupInfoTable 1 }
TrunkGroupInfoTableEntry ::= SEQUENCE {
trunkGroupInfoIndex Integer32,
trunkGroupInfoState INTEGER,
trunkGroupInfoPorts OCTET STRING
}
trunkGroupInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupInfoTableEntry 1 }
trunkGroupInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group state."
::= { trunkGroupInfoTableEntry 2 }
trunkGroupInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupInfoTableEntry 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2Physical
-- ----------------------------------------------------------------------------
END
Reference in New Issue View Git Blame Copy Permalink