mibs/MIBS/hp/HP-SN-APPLETALK-MIB
2023-12-05 12:25:34 +01:00

773 lines
18 KiB
Plaintext

HP-SN-APPLETALK-MIB DEFINITIONS ::= BEGIN
-- Foundry snAppleTalk Group MIB Release 1.0.0
-- Revision 0 1/19/98
-- Copyright 1996-98 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
ClearStatus, RowSts, PortIndex
FROM HP-SN-IP-MIB
snAppleTalk
FROM HP-SN-ROOT-MIB;
ATNetworkNumber ::= -- 2 octets of net number
-- in network byte order
OCTET STRING (SIZE (2))
DdpNodeAddress ::= -- 2 octets of net number
-- in network byte order,
-- 1 octet of node number
OCTET STRING (SIZE (3))
ATName ::= -- 0 to 32 octets of AppleTalk
-- ASCII [Inside AppleTalk]
OCTET STRING (SIZE (0..32))
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled (1) }
-- Action
Action ::= INTEGER { deny(0), permit(1) }
-- SECTION 2: MIB
-- Router AppleTalk MIB
-- This section contains AppleTalk specific router MIB object definitions.
-- AppleTalk general group
snRtATGeneral OBJECT IDENTIFIER ::= { snAppleTalk 1 }
snRtATRoutingEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable AppleTalk routing function on this box."
::= { snRtATGeneral 1 }
snRtATClearArpCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk arp cache table."
::= { snRtATGeneral 2 }
snRtATClearFwdCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk forward cache table."
::= { snRtATGeneral 3 }
snRtATClearRoute OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk route table."
::= { snRtATGeneral 4 }
snRtATClearTrafficCounters OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk network statistics counters."
::= { snRtATGeneral 5 }
snRtATArpRetransmitCount OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of AppleTalk ARP request retransmits if the
first request timeouts."
DEFVAL { 2 }
::= { snRtATGeneral 6 }
snRtATArpRetransmitInterval OBJECT-TYPE
SYNTAX INTEGER (1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The waiting time interval for an AppleTalk ARP response
before retransmission of an ARP request. Each unit value
is one second."
DEFVAL { 1 }
::= { snRtATGeneral 7 }
snRtATGleanPacketsEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable AppleTalk glean packets function on this box."
DEFVAL { disabled }
::= { snRtATGeneral 8 }
snRtATRtmpUpdateInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The periodic time interval to transmit a RTMP
update. Each unit value is one second."
DEFVAL { 10 }
::= { snRtATGeneral 9 }
snRtATZipQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The periodic time interval to transmit a ZIP
query. Each unit value is one second."
DEFVAL { 10 }
::= { snRtATGeneral 10 }
snRtATInRtmpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RTMP packets received by
this entity."
::= { snRtATGeneral 11 }
snRtATOutRtmpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RTMP packets which were
transmitted from this entity."
::= { snRtATGeneral 12 }
snRtATFilteredRtmpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RTMP packets which were
filtered by this entity."
::= { snRtATGeneral 13 }
snRtATInZipPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP packets received by
this entity."
::= { snRtATGeneral 14 }
snRtATOutZipPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP packets which were
transmitted from this entity."
::= { snRtATGeneral 15 }
snRtATInZipGZLPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP get zone list packets received by
this entity."
::= { snRtATGeneral 16 }
snRtATOutZipGZLPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP get zone list packets which were
transmitted from this entity."
::= { snRtATGeneral 17 }
snRtATInZipNetInfoPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP network information packets received by
this entity."
::= { snRtATGeneral 18 }
snRtATOutZipNetInfoPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP network information packets which were
transmitted from this entity."
::= { snRtATGeneral 19 }
snRtATInDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams received by
this entity."
::= { snRtATGeneral 20 }
snRtATOutDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams which were
transmitted from this entity."
::= { snRtATGeneral 21 }
snRtATForwardedDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input DDP datagrams for which this entity
was not their final DDP destination, as a result of
which an attempt was made to find a route to forward
them to that final destination."
::= { snRtATGeneral 22 }
snRtATInDeliveredDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of input DDP datagrams for which
this entity was their final DDP destination."
::= { snRtATGeneral 23 }
snRtATDroppedNoRouteDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams dropped because a
route could not be found to their final destination."
::= { snRtATGeneral 24 }
snRtATDroppedBadHopCountsDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of input DDP datagrams dropped
because this entity was not their final destination
and their hop count would exceed 15."
::= { snRtATGeneral 25 }
snRtATDroppedOtherReasonsDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams dropped because
of other reasons, e.g. run out of resouces."
::= { snRtATGeneral 26 }
snRtATInAarpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AppleTalk ARP packets received by
this entity."
::= { snRtATGeneral 27 }
snRtATOutAarpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AppleTalk ARP packets which were
transmitted from this entity."
::= { snRtATGeneral 28 }
-- AppleTalk socket priority table
snRtATSocketPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATSocketPriorityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk socket priority table."
::= { snAppleTalk 2 }
snRtATSocketPriorityEntry OBJECT-TYPE
SYNTAX SnRtATSocketPriorityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk socket priority table."
INDEX { snRtATSocketPrioritySocket }
::= { snRtATSocketPriorityTable 1 }
SnRtATSocketPriorityEntry ::= SEQUENCE {
snRtATSocketPrioritySocket
INTEGER,
snRtATSocketPriorityPriority
INTEGER
}
snRtATSocketPrioritySocket OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Socket number for a socket priority entry."
::= { snRtATSocketPriorityEntry 1 }
snRtATSocketPriorityPriority OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Standalone router Priority level applies to a socket number:
low(0) -- low prority
high(1) -- high prority.
The BigIron Priority levels applies to a socket number are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snRtATSocketPriorityEntry 2 }
-- AppleTalk interface zone filter table
snRtATPortZoneFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATPortZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk interface zone filter table."
::= { snAppleTalk 3 }
snRtATPortZoneFilterEntry OBJECT-TYPE
SYNTAX SnRtATPortZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk interface zone filter table."
INDEX { snRtATPortZoneFilterPortIndex, snRtATPortZoneFilterZone }
::= { snRtATPortZoneFilterTable 1 }
SnRtATPortZoneFilterEntry ::= SEQUENCE {
snRtATPortZoneFilterPortIndex
PortIndex,
snRtATPortZoneFilterZone
ATName,
snRtATPortZoneFilterAction
Action,
snRtATPortZoneFilterRtmpEnable
RtrStatus,
snRtATPortZoneFilterRowStatus
RowSts
}
snRtATPortZoneFilterPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for a zone filter entry."
::= { snRtATPortZoneFilterEntry 1 }
snRtATPortZoneFilterZone OBJECT-TYPE
SYNTAX ATName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The zone name granted for this filter."
::= { snRtATPortZoneFilterEntry 2 }
snRtATPortZoneFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the AppleTalk packet match
with this filter."
::= { snRtATPortZoneFilterEntry 3 }
snRtATPortZoneFilterRtmpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable RTMP filtering."
::= { snRtATPortZoneFilterEntry 4 }
snRtATPortZoneFilterRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a zone filter entry."
::= { snRtATPortZoneFilterEntry 5 }
-- AppleTalk port table
snRtATPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk port table."
::= { snAppleTalk 4 }
snRtATPortEntry OBJECT-TYPE
SYNTAX SnRtATPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk port table."
INDEX { snRtATPortIndex }
::= { snRtATPortTable 1 }
SnRtATPortEntry ::= SEQUENCE {
snRtATPortIndex
PortIndex,
snRtATPortArpAge
INTEGER,
snRtATPortState
INTEGER,
snRtATPortSeedRouter
INTEGER,
snRtATPortOperationMode
INTEGER
}
snRtATPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for port table entry."
::= { snRtATPortEntry 1 }
snRtATPortArpAge OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in minutes an ARP entry can
be valid without relearning.
0 - Don't age."
DEFVAL { 10 }
::= { snRtATPortEntry 2 }
snRtATPortState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
down(2),
up(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The up and down state of this port."
::= { snRtATPortEntry 3 }
snRtATPortSeedRouter OBJECT-TYPE
SYNTAX INTEGER {
other(1),
seedRouter(2),
nonSeedRouter(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This port was configured to seed or non-seed router."
::= { snRtATPortEntry 4 }
snRtATPortOperationMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
seedRouter(2),
nonSeedRouter(3),
notOperational(4),
routingDisabled(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operation mode of this port."
::= { snRtATPortEntry 5 }
-- AppleTalk forwarding cache table
snRtATFwdCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk forwarding cache table."
::= { snAppleTalk 5 }
snRtATFwdCacheEntry OBJECT-TYPE
SYNTAX SnRtATFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk forwarding cache table."
INDEX { snRtATFwdCacheIndex }
::= { snRtATFwdCacheTable 1 }
SnRtATFwdCacheEntry ::= SEQUENCE {
snRtATFwdCacheIndex
INTEGER,
snRtATFwdCacheNetAddr
DdpNodeAddress,
snRtATFwdCacheMacAddr
OCTET STRING,
snRtATFwdCacheNextHop
DdpNodeAddress,
snRtATFwdCacheOutgoingPort
INTEGER,
snRtATFwdCacheType
INTEGER,
snRtATFwdCacheAction
INTEGER,
snRtATFwdCacheVLanId
INTEGER
}
snRtATFwdCacheIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for an AppleTalk forwarding cache table entry."
::= { snRtATFwdCacheEntry 1 }
snRtATFwdCacheNetAddr OBJECT-TYPE
SYNTAX DdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The AppleTalk network address of a station."
::= { snRtATFwdCacheEntry 2 }
snRtATFwdCacheMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Mac address of an AppleTalk station."
::= { snRtATFwdCacheEntry 3 }
snRtATFwdCacheNextHop OBJECT-TYPE
SYNTAX DdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The next hop router network address."
::= { snRtATFwdCacheEntry 4 }
snRtATFwdCacheOutgoingPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outgoing port of which packets will forward to.
Return port value of zero to indicate no outgoing port
associated to this entry."
::= { snRtATFwdCacheEntry 5 }
snRtATFwdCacheType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), permanent(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 'dynamic' or 'permanent' type for an AppleTalk forwarding
cache table entry."
::= { snRtATFwdCacheEntry 6 }
snRtATFwdCacheAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
forward(2),
forUs(3),
waitForArp(4),
dropPacket(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The action to take."
::= { snRtATFwdCacheEntry 7 }
snRtATFwdCacheVLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID for an AppleTalk forwarding cache table entry.
Return VLAN ID value of zero to indicate no VLAN associated
to this entry."
::= { snRtATFwdCacheEntry 8 }
-- AppleTalk zone table
snRtATZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk zone table."
::= { snAppleTalk 6 }
snRtATZoneEntry OBJECT-TYPE
SYNTAX SnRtATZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk zone table."
INDEX { snRtATZoneIndex }
::= { snRtATZoneTable 1 }
SnRtATZoneEntry ::= SEQUENCE {
snRtATZoneIndex
INTEGER,
snRtATZoneNetStart
ATNetworkNumber,
snRtATZoneNetEnd
ATNetworkNumber,
snRtATZoneName
ATName
}
snRtATZoneIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for an AppleTalk zone table entry."
::= { snRtATZoneEntry 1 }
snRtATZoneNetStart OBJECT-TYPE
SYNTAX ATNetworkNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first AppleTalk network address in the range
of this zone name."
::= { snRtATZoneEntry 2 }
snRtATZoneNetEnd OBJECT-TYPE
SYNTAX ATNetworkNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last AppleTalk network address in the range
of this zone name."
::= { snRtATZoneEntry 3 }
snRtATZoneName OBJECT-TYPE
SYNTAX ATName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The zone name."
::= { snRtATZoneEntry 4 }
-- AppleTalk additional zone filter table
snRtATAddZoneFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATAddZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk additional zone filter table. Additional zones
are those zones that do not match any zones defined in the
zone filter table."
::= { snAppleTalk 7 }
snRtATAddZoneFilterEntry OBJECT-TYPE
SYNTAX SnRtATAddZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk additional zone filter table."
INDEX { snRtATAddZoneFilterPortIndex }
::= { snRtATAddZoneFilterTable 1 }
SnRtATAddZoneFilterEntry ::= SEQUENCE {
snRtATAddZoneFilterPortIndex
PortIndex,
snRtATAddZoneFilterAction
Action,
snRtATAddZoneFilterRtmpEnable
RtrStatus
}
snRtATAddZoneFilterPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for additional zone filter table entry."
::= { snRtATAddZoneFilterEntry 1 }
snRtATAddZoneFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if no zone filter match."
::= { snRtATAddZoneFilterEntry 2 }
snRtATAddZoneFilterRtmpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable RTMP filtering on additional zone."
::= { snRtATAddZoneFilterEntry 3 }
END