3540 lines
130 KiB
Plaintext
3540 lines
130 KiB
Plaintext
-- ****************************************************************************
|
|
-- COLUBRIS-802DOT11-MIB definitions
|
|
--
|
|
-- Copyright (c) 2004, Colubris Networks, Inc.
|
|
-- All Rights Reserved.
|
|
--
|
|
-- Colubris Networks IEEE802.11 MIB file.
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
|
|
COLUBRIS-802DOT11-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Integer32, Unsigned32, Counter32, IpAddress, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,
|
|
DisplayString, MacAddress, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex, ifDescr, InterfaceIndex
|
|
FROM IF-MIB
|
|
coVirtualAccessPointConfigEntry, coVirtualApSSID
|
|
FROM COLUBRIS-VIRTUAL-AP-MIB
|
|
colubrisMgmtV2
|
|
FROM COLUBRIS-SMI
|
|
ColubrisSSIDOrNone, ColubrisNotificationEnable, ColubrisDataRate, ColubrisRadioType
|
|
FROM COLUBRIS-TC
|
|
;
|
|
|
|
|
|
colubris802dot11 MODULE-IDENTITY
|
|
LAST-UPDATED "200802210000Z"
|
|
ORGANIZATION "Colubris Networks, Inc."
|
|
CONTACT-INFO "Colubris Networks
|
|
Postal: 200 West Street Ste 300
|
|
Waltham, Massachusetts 02451-1121
|
|
UNITED STATES
|
|
Phone: +1 781 684 0001
|
|
Fax: +1 781 684 0009
|
|
|
|
E-mail: cn-snmp@colubris.com"
|
|
DESCRIPTION "The MIB module for IEEE 802.11 entities."
|
|
|
|
::= { colubrisMgmtV2 4 }
|
|
|
|
|
|
-- *** Major sections *********************************************************
|
|
|
|
-- Access Point Attributes
|
|
-- DEFINED AS "The Access Access object class provides the necessary
|
|
-- support at the station to manage the processes in the station
|
|
-- such that the station may work cooperatively as a part of an
|
|
-- IEEE 802.11 network.";
|
|
|
|
coDot11ap OBJECT IDENTIFIER ::= { colubris802dot11 1 }
|
|
|
|
-- coDot11ap GROUPS
|
|
-- coDot11AccessPointConfigTable ::= { coDot11ap 1 }
|
|
-- coDot11AuthenticationAlgorithmsTable ::= { coDot11ap 2 }
|
|
-- coDot11WEPDefaultKeysTable ::= { coDot11ap 3 }
|
|
-- coDot11PrivacyTable ::= { coDot11ap 4 }
|
|
-- coDot11AssociationTable ::= { coDot11ap 5 }
|
|
-- coDot11WDSPortTable ::= { coDot11ap 6 }
|
|
-- coDot11ScanTable ::= { coDot11ap 7 }
|
|
|
|
-- MAC Attributes
|
|
-- DEFINED AS "The MAC object class provides the necessary support
|
|
-- for the access control, generation, and verification of frame check
|
|
-- sequences, and proper delivery of valid data to upper layers.";
|
|
|
|
coDot11mac OBJECT IDENTIFIER ::= { colubris802dot11 2 }
|
|
|
|
-- MAC GROUPS
|
|
-- reference IEEE Std 802.1f-1993
|
|
-- coDot11OperationTable ::= { coDot11mac 1 }
|
|
-- coDot11CountersTable ::= { coDot11mac 2 }
|
|
|
|
-- PHY Attributes
|
|
-- DEFINED AS "The PHY object class provides the necessary support
|
|
-- for required PHY operational information that may vary from PHY
|
|
-- to PHY and from STA to STA to be communicated to upper layers."
|
|
|
|
coDot11phy OBJECT IDENTIFIER ::= { colubris802dot11 3 }
|
|
|
|
-- phy GROUPS
|
|
-- coDot11PhyOperationTable ::= { coDot11phy 1 }
|
|
-- coDot11PhyAntennaTable ::= { coDot11phy 2 }
|
|
-- coDot11PhyConfigTable ::= { coDot11phy 3 }
|
|
-- coDot11PhyDSSSTable ::= { coDot11phy 4 }
|
|
-- coDot11RegDomainsSupportedTable ::= { coDot11phy 5 }
|
|
-- coDot11AntennasListTable ::= { coDot11phy 6 }
|
|
-- coDot11SupportedDataRatesTxTable ::= { coDot11phy 7 }
|
|
-- coDot11SupportedDataRatesRxTable ::= { coDot11phy 8 }
|
|
-- coDot11PhyOFDMTable ::= { coDot11phy 9 }
|
|
-- coDot11PhyHTTable ::= { coDot11phy 14 }
|
|
|
|
|
|
-- *** Textual conventions from 802 definitions *******************************
|
|
WEPKeytype ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "255a"
|
|
STATUS current
|
|
DESCRIPTION "Textual conventions from 802 definitions."
|
|
SYNTAX OCTET STRING (SIZE (0|5|13))
|
|
|
|
|
|
-- *** Access Point Config Table **********************************************
|
|
coDot11AccessPointConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11AccessPointConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "WLAN profile configuration attributes. In tablular form to
|
|
allow for multiple instances on an agent. Not supported on
|
|
the WCB-200."
|
|
::= { coDot11ap 1 }
|
|
|
|
coDot11AccessPointConfigEntry OBJECT-TYPE
|
|
SYNTAX CoDot11AccessPointConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11AccessPointConfigTable.
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
coVirtualWlanProfileIndex - Uniquely access a profile for this
|
|
particular 802.11 interface."
|
|
AUGMENTS { coVirtualAccessPointConfigEntry }
|
|
::= { coDot11AccessPointConfigTable 1 }
|
|
|
|
CoDot11AccessPointConfigEntry ::= SEQUENCE
|
|
{
|
|
coDot11RelayBetweenStation TruthValue,
|
|
coDot11BeaconPeriod Integer32,
|
|
coDot11DTIMPeriod Integer32,
|
|
coDot11PrivacyOptionImplemented TruthValue,
|
|
coDot11RSNAOptionImplemented TruthValue,
|
|
coDot11NumberOfUsers Unsigned32,
|
|
coDot11AddToAssociationNotification TruthValue,
|
|
coDot11PhyTxPowerAdminLevel Integer32,
|
|
coDot11PhyTxPowerOperLevel Integer32,
|
|
coDot11CurrentSNRLevel Integer32,
|
|
coDot11BSSID MacAddress,
|
|
coDot11AdminMinimumDataRate ColubrisDataRate,
|
|
coDot11AdminMaximumDataRate ColubrisDataRate,
|
|
coDot11HighThroughputOptionImplemented TruthValue
|
|
}
|
|
|
|
coDot11RelayBetweenStation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies if wireless client stations can exchange data
|
|
with one another."
|
|
::= { coDot11AccessPointConfigEntry 1 }
|
|
|
|
coDot11BeaconPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the number of TUs that a station uses for
|
|
scheduling Beacon transmissions. This value is
|
|
transmitted in Beacon and Probe Response frames."
|
|
::= { coDot11AccessPointConfigEntry 2 }
|
|
|
|
coDot11DTIMPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the number of beacon intervals that elapses
|
|
between transmission of Beacons frames containing a TIM
|
|
element whose DTIM Count field is 0. This value is
|
|
transmitted in the DTIM Period field of Beacon frames.
|
|
Client stations use the DTIM to wake up from low-power
|
|
mode to receive multicast traffic."
|
|
::= { coDot11AccessPointConfigEntry 3 }
|
|
|
|
coDot11PrivacyOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the IEEE 802.11 WEP option is enabled."
|
|
::= { coDot11AccessPointConfigEntry 4 }
|
|
|
|
coDot11RSNAOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the profile is RSNA-capable."
|
|
::= { coDot11AccessPointConfigEntry 5 }
|
|
|
|
coDot11NumberOfUsers OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the number of users connected via this profile."
|
|
::= { coDot11AccessPointConfigEntry 6 }
|
|
|
|
coDot11AddToAssociationNotification OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies if an association trap notification is sent
|
|
each time a user connects to this profile."
|
|
::= { coDot11AccessPointConfigEntry 7 }
|
|
|
|
coDot11PhyTxPowerAdminLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..23)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the transmission power of the radio.
|
|
On Intersil hardware, only a few specific values are allowed.
|
|
|
|
{ 13, 17, 23 } for North America,
|
|
|
|
{ 13, 17, 20 } for Europe and the rest of the world."
|
|
::= { coDot11AccessPointConfigEntry 8 }
|
|
|
|
coDot11PhyTxPowerOperLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..23)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Transmission power of the radio."
|
|
::= { coDot11AccessPointConfigEntry 9 }
|
|
|
|
coDot11CurrentSNRLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..92)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average SNR level for all the connected client stations."
|
|
::= { coDot11AccessPointConfigEntry 10 }
|
|
|
|
coDot11BSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC Address assigned to this device."
|
|
::= { coDot11AccessPointConfigEntry 11 }
|
|
|
|
coDot11AdminMinimumDataRate OBJECT-TYPE
|
|
SYNTAX ColubrisDataRate
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Specifies the minimum transmission rate that clients stations
|
|
must meet in order to connect with this profile. Client stations
|
|
that are below this setting will not be able to connect.
|
|
The value of this object must always be less or equal
|
|
than the value of coDot11MaximumDataRate.
|
|
|
|
Allowed values will change according to the state of the
|
|
radio's wireless mode (coDot11CurrentOperPHYType).
|
|
|
|
ieee802dot11b: Lowest, 1, 2, 5.5, and 11 Meg
|
|
|
|
ieee802dot11a: Lowest, 6, 9, 12, 18, 24, 36, 48, and 54 Meg
|
|
|
|
ieee802dot11g: Lowest, 6, 9, 12, 18, 24, 36, 48, and 54 Meg
|
|
|
|
11bAndg: All rates permitted."
|
|
|
|
::= { coDot11AccessPointConfigEntry 12 }
|
|
|
|
coDot11AdminMaximumDataRate OBJECT-TYPE
|
|
SYNTAX ColubrisDataRate
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Specifies the maximum transmission rate that clients stations
|
|
must respect to connect with this profile. Clients stations
|
|
that attempt to associate at a higher data rate will be refused.
|
|
|
|
The value of this object must always be greater than the value of
|
|
coDot11MinimumDataRate.
|
|
|
|
Allowed values will change according to the state of the
|
|
radio's wireless mode (coDot11CurrentOperPHYType).
|
|
|
|
ieee802dot11b: 1, 2, 5.5, 11Meg and highest
|
|
|
|
ieee802dot11a: 6, 9, 12, 18, 24, 36, 48, 54 Meg, and highest
|
|
|
|
ieee802dot11g: 6, 9, 12, 18, 24, 36, 48, 54 Meg, and highest
|
|
|
|
11bAndg: All rates permitted."
|
|
::= { coDot11AccessPointConfigEntry 13 }
|
|
|
|
coDot11HighThroughputOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the profile is 802.11n capable."
|
|
::= { coDot11AccessPointConfigEntry 14 }
|
|
|
|
|
|
-- *** End of Access Point config Table ***************************************
|
|
|
|
|
|
-- *** Authentication Algorithms Table ****************************************
|
|
coDot11AuthenticationAlgorithmsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11AuthenticationAlgorithmsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This (conceptual) table of attributes is a set of all the
|
|
authentication algorithms supported by the stations.
|
|
The following are the default values and the associated
|
|
algorithm:
|
|
Value = 1: Open System
|
|
Value = 2: Shared Key"
|
|
REFERENCE "IEEE Std 802.11-1997, 7.3.1.1"
|
|
::= { coDot11ap 2 }
|
|
|
|
coDot11AuthenticationAlgorithmsEntry OBJECT-TYPE
|
|
SYNTAX CoDot11AuthenticationAlgorithmsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Entry (conceptual row) in the Authentication Algorithms
|
|
Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11AuthenticationAlgorithmsIndex - Uniquely identify an
|
|
algorithm in the table."
|
|
INDEX { ifIndex, coDot11AuthenticationAlgorithmsIndex }
|
|
::= { coDot11AuthenticationAlgorithmsTable 1 }
|
|
|
|
CoDot11AuthenticationAlgorithmsEntry ::= SEQUENCE
|
|
{
|
|
coDot11AuthenticationAlgorithmsIndex Integer32,
|
|
coDot11AuthenticationAlgorithm INTEGER,
|
|
coDot11AuthenticationAlgorithmsEnable TruthValue
|
|
}
|
|
|
|
coDot11AuthenticationAlgorithmsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The auxiliary variable used to identify instances of the
|
|
columnar objects in the Authentication Algorithms Table."
|
|
::= { coDot11AuthenticationAlgorithmsEntry 1 }
|
|
|
|
coDot11AuthenticationAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
openSystem (1),
|
|
sharedKey (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifies all the authentication algorithms supported by
|
|
the STAs. The following are the default values and the
|
|
their associated algorithms.
|
|
Value = 1: Open System
|
|
Value = 2: Shared Key"
|
|
::= { coDot11AuthenticationAlgorithmsEntry 2 }
|
|
|
|
coDot11AuthenticationAlgorithmsEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when true at a station, enables the
|
|
acceptance of the authentication algorithm described in the
|
|
corresponding table entry in authentication frames received by
|
|
the station that have odd authentication sequence numbers.
|
|
The default value of this attribute is 'true' for the
|
|
Open System table entry and 'false' for all other table
|
|
entries."
|
|
::= { coDot11AuthenticationAlgorithmsEntry 3 }
|
|
|
|
-- *** End of Authentication Algorithms Table *********************************
|
|
|
|
|
|
-- *** WEP Default Keys Table *************************************************
|
|
coDot11WEPDefaultKeysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11WEPDefaultKeysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Conceptual table for WEP default keys. This table
|
|
contains the four WEP default secret key values
|
|
corresponding to the four possible KeyID values. The WEP
|
|
default secret keys are logically WRITE-ONLY. Attempts to
|
|
read the entries in this table will return unsuccessful
|
|
status and values of null or zero. The default value of
|
|
each WEP default key is null. This table is not supported
|
|
on the WCB-200."
|
|
REFERENCE "IEEE Std 802.11-1997, 8.3.2"
|
|
::= { coDot11ap 3 }
|
|
|
|
coDot11WEPDefaultKeysEntry OBJECT-TYPE
|
|
SYNTAX CoDot11WEPDefaultKeysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Entry (conceptual row) in the WEP Default Keys Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coVirtualWlanProfileIndex - Uniquely access a profile for this
|
|
particular 802.11 interface."
|
|
AUGMENTS { coVirtualAccessPointConfigEntry }
|
|
::= { coDot11WEPDefaultKeysTable 1 }
|
|
|
|
CoDot11WEPDefaultKeysEntry ::= SEQUENCE
|
|
{
|
|
coDot11WEPDefaultKey1Value WEPKeytype,
|
|
coDot11WEPDefaultKey2Value WEPKeytype,
|
|
coDot11WEPDefaultKey3Value WEPKeytype,
|
|
coDot11WEPDefaultKey4Value WEPKeytype
|
|
}
|
|
|
|
coDot11WEPDefaultKey1Value OBJECT-TYPE
|
|
SYNTAX WEPKeytype
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A WEP default secret key1 value.
|
|
Reading this attribute will always return a Zero-Length string."
|
|
::= { coDot11WEPDefaultKeysEntry 1 }
|
|
|
|
coDot11WEPDefaultKey2Value OBJECT-TYPE
|
|
SYNTAX WEPKeytype
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A WEP default secret key2 value.
|
|
Reading this attribute will always return a Zero-Length string."
|
|
::= { coDot11WEPDefaultKeysEntry 2 }
|
|
|
|
coDot11WEPDefaultKey3Value OBJECT-TYPE
|
|
SYNTAX WEPKeytype
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A WEP default secret key3 value.
|
|
Reading this attribute will always return a Zero-Length string."
|
|
::= { coDot11WEPDefaultKeysEntry 3 }
|
|
|
|
coDot11WEPDefaultKey4Value OBJECT-TYPE
|
|
SYNTAX WEPKeytype
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A WEP default secret key4 value.
|
|
Reading this attribute will always return a Zero-Length string."
|
|
::= { coDot11WEPDefaultKeysEntry 4 }
|
|
|
|
-- *** End of WEP Default Keys Table ******************************************
|
|
|
|
|
|
-- *** Privacy Table **********************************************************
|
|
coDot11PrivacyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PrivacyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group containing attributes related to IEEE 802.11
|
|
Privacy. In tabular form to allow multiple instances on
|
|
an agent. This table is not supported on the WCB-200."
|
|
::= { coDot11ap 4 }
|
|
|
|
coDot11PrivacyEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PrivacyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PrivacyTable Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coVirtualWlanProfileIndex - Uniquely access a profile for this
|
|
particular 802.11 interface."
|
|
AUGMENTS { coVirtualAccessPointConfigEntry }
|
|
::= { coDot11PrivacyTable 1 }
|
|
|
|
CoDot11PrivacyEntry ::= SEQUENCE
|
|
{
|
|
coDot11PrivacyInvoked TruthValue,
|
|
coDot11WEPDefaultKeyID Integer32,
|
|
coDot11ExcludeUnencrypted TruthValue,
|
|
coDot11WEPICVErrorCount Counter32,
|
|
coDot11WEPExcludedCount Counter32,
|
|
coDot11RSNAEnabled TruthValue
|
|
}
|
|
|
|
coDot11PrivacyInvoked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When this attribute is TRUE, it indicates that some level
|
|
of security is invoked for transmitting frames of type Data.
|
|
For IEEE 802.11-1999 clients, the security mechanism used is
|
|
WEP. For RSNA-capable clients, an additional variable
|
|
coDot11RSNAEnabled indicates whether RSNA is enabled. If
|
|
coDot11RSNAEnabled is FALSE or the MIB variable does not exist,
|
|
the security mechanism invoked is WEP; if coDot11RSNAEnabled is
|
|
TRUE, RSNA security mechanisms invoked are configured in the
|
|
coDot11RSNAConfigTable. The default value of this attribute
|
|
is FALSE."
|
|
::= { coDot11PrivacyEntry 1 }
|
|
|
|
coDot11WEPDefaultKeyID OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This attribute indicates the use of the first, second,
|
|
third, or fourth element of the WEPDefaultKeys array when set
|
|
to values of zero, one, two, or three. The default value of
|
|
this attribute is 0."
|
|
REFERENCE "IEEE Std 802.11-1997, 8.3.2"
|
|
::= { coDot11PrivacyEntry 2 }
|
|
|
|
coDot11ExcludeUnencrypted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When this attribute is true, the STA does not indicate at
|
|
the MAC service interface received MSDUs that have the WEP
|
|
subfield of the Frame Control field equal to zero. When this
|
|
attribute is false, the STA may accept MSDUs that have the WEP
|
|
subfield of the Frame Control field equal to zero. The default
|
|
value of this attribute shall be true."
|
|
::= { coDot11PrivacyEntry 3 }
|
|
|
|
coDot11WEPICVErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter increments when a frame is received with the
|
|
WEP subfield of the Frame Control field set to one and the
|
|
value of the ICV as received in the frame does not match the
|
|
ICV value that is calculated for the contents of the received
|
|
frame. ICV errors for TKIP are not counted in this variable
|
|
but in coDot11RSNAStatsTKIPICVErrors."
|
|
::= { coDot11PrivacyEntry 4 }
|
|
|
|
coDot11WEPExcludedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter increments when a frame is received with
|
|
the WEP subfield of the Frame Control field set to zero and
|
|
the value of coDot11ExcludeUnencrypted causes that frame to
|
|
be discarded."
|
|
::= { coDot11PrivacyEntry 5 }
|
|
|
|
coDot11RSNAEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if RSNA is enabled, which means that the RSN
|
|
Information Element is advertised in Beacons and Probe
|
|
Responses. This object requires that coDot11PrivacyInvoked
|
|
also be set to TRUE."
|
|
::= { coDot11PrivacyEntry 6 }
|
|
|
|
-- *** End of Privacy Table ***************************************************
|
|
|
|
|
|
-- *** Association Table ******************************************************
|
|
coDot11AssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11AssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group containing attributes related to associated stations.
|
|
In tabular form to allow multiple instances on an agent. This
|
|
table is not supported on the WCB-200."
|
|
::= { coDot11ap 5 }
|
|
|
|
coDot11AssociationEntry OBJECT-TYPE
|
|
SYNTAX CoDot11AssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11Association Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11AssociationIndex - Uniquely identify a device inside the
|
|
association table."
|
|
INDEX { ifIndex, coDot11AssociationIndex }
|
|
::= { coDot11AssociationTable 1 }
|
|
|
|
CoDot11AssociationEntry ::= SEQUENCE
|
|
{
|
|
coDot11AssociationIndex Integer32,
|
|
coDot11StationMACAddress MacAddress,
|
|
coDot11StationConnectTime Counter32,
|
|
coDot11SignalLevel Integer32,
|
|
coDot11NoiseLevel Integer32,
|
|
coDot11SNR Integer32,
|
|
coDot11PktsRate1 Counter32,
|
|
coDot11PktsRate2 Counter32,
|
|
coDot11PktsRate5dot5 Counter32,
|
|
coDot11PktsRate11 Counter32,
|
|
coDot11PktsRate6 Counter32,
|
|
coDot11PktsRate9 Counter32,
|
|
coDot11PktsRate12 Counter32,
|
|
coDot11PktsRate18 Counter32,
|
|
coDot11PktsRate24 Counter32,
|
|
coDot11PktsRate36 Counter32,
|
|
coDot11PktsRate48 Counter32,
|
|
coDot11PktsRate54 Counter32,
|
|
coDot11TransmitRate Unsigned32,
|
|
coDot11ReceiveRate Unsigned32,
|
|
coDot11InPkts Counter32,
|
|
coDot11OutPkts Counter32,
|
|
coDot11InOctets Counter32,
|
|
coDot11OutOctets Counter32,
|
|
coDot11StationSSID ColubrisSSIDOrNone,
|
|
coDot11StationName OCTET STRING,
|
|
coDot11StationIPAddress IpAddress,
|
|
coDot11StationVLAN Integer32,
|
|
coDot11StationLocalInterface InterfaceIndex,
|
|
coDot11StaHT TruthValue
|
|
}
|
|
|
|
coDot11AssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The auxiliary variable used to identify instances of the
|
|
columnar objects in the Association Table."
|
|
::= { coDot11AssociationEntry 1 }
|
|
|
|
coDot11StationMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Unique MAC Address assigned to the device."
|
|
::= { coDot11AssociationEntry 2 }
|
|
|
|
coDot11StationConnectTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elapsed time in seconds since a station has associated
|
|
to this device."
|
|
::= { coDot11AssociationEntry 3 }
|
|
|
|
coDot11SignalLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Strength of the wireless signal."
|
|
::= { coDot11AssociationEntry 4 }
|
|
|
|
coDot11NoiseLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Level of local background noise."
|
|
::= { coDot11AssociationEntry 5 }
|
|
|
|
coDot11SNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Relative strength of the signal level compared to the noise
|
|
level."
|
|
::= { coDot11AssociationEntry 6 }
|
|
|
|
coDot11PktsRate1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 1 Mbit/s."
|
|
::= { coDot11AssociationEntry 7 }
|
|
|
|
coDot11PktsRate2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 2 Mbit/s."
|
|
::= { coDot11AssociationEntry 8 }
|
|
|
|
coDot11PktsRate5dot5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 5.5 Mbit/s."
|
|
::= { coDot11AssociationEntry 9 }
|
|
|
|
coDot11PktsRate11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 11 Mbit/s."
|
|
::= { coDot11AssociationEntry 10 }
|
|
|
|
coDot11PktsRate6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 6 Mbit/s."
|
|
::= { coDot11AssociationEntry 11 }
|
|
|
|
coDot11PktsRate9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 9 Mbit/s."
|
|
::= { coDot11AssociationEntry 12 }
|
|
|
|
coDot11PktsRate12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 12 Mbit/s."
|
|
::= { coDot11AssociationEntry 13 }
|
|
|
|
coDot11PktsRate18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 18 Mbit/s."
|
|
::= { coDot11AssociationEntry 14 }
|
|
|
|
coDot11PktsRate24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 24 Mbit/s."
|
|
::= { coDot11AssociationEntry 15 }
|
|
|
|
coDot11PktsRate36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 36 Mbit/s."
|
|
::= { coDot11AssociationEntry 16 }
|
|
|
|
coDot11PktsRate48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 48 Mbit/s."
|
|
::= { coDot11AssociationEntry 17 }
|
|
|
|
coDot11PktsRate54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of frames received at 54 Mbit/s."
|
|
::= { coDot11AssociationEntry 18 }
|
|
|
|
coDot11TransmitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "500Kb/s"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current transmit rate of a station."
|
|
::= { coDot11AssociationEntry 19 }
|
|
|
|
coDot11ReceiveRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "500Kb/s"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current receive rate of a station."
|
|
::= { coDot11AssociationEntry 20 }
|
|
|
|
coDot11InPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets received from the station after
|
|
the association."
|
|
::= { coDot11AssociationEntry 21 }
|
|
|
|
coDot11OutPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets send to the station after
|
|
the association."
|
|
::= { coDot11AssociationEntry 22 }
|
|
|
|
coDot11InOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of octets received from the station after
|
|
the association."
|
|
::= { coDot11AssociationEntry 23 }
|
|
|
|
coDot11OutOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of octets send to the station after
|
|
the association."
|
|
::= { coDot11AssociationEntry 24 }
|
|
|
|
coDot11StationSSID OBJECT-TYPE
|
|
SYNTAX ColubrisSSIDOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SSID of the associated station."
|
|
::= { coDot11AssociationEntry 25 }
|
|
|
|
coDot11StationName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the associated station."
|
|
::= { coDot11AssociationEntry 26 }
|
|
|
|
coDot11StationIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address of the associated station."
|
|
::= { coDot11AssociationEntry 27 }
|
|
|
|
coDot11StationVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VLAN ID of the associated station.
|
|
This object is always available on satellite devices.
|
|
However, on access-controller devices, this object is
|
|
only available under certain conditions, when the client
|
|
station is connected to a profile that is
|
|
not access-controlled."
|
|
::= { coDot11AssociationEntry 28 }
|
|
|
|
coDot11StationLocalInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Specifies the Local Interface where the associated station
|
|
traffic will be forwarded to."
|
|
::= { coDot11AssociationEntry 29 }
|
|
|
|
coDot11StaHT OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates that the associated station is HT."
|
|
::= { coDot11AssociationEntry 30 }
|
|
|
|
-- *** End of Association Table ***********************************************
|
|
|
|
|
|
-- *** WDS port Table *********************************************************
|
|
coDot11WDSPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11WDSPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Conceptual table for the WDS Ports. This table contains
|
|
the six WDS MAC address. This table is not supported on
|
|
the WCB-200."
|
|
::= { coDot11ap 6 }
|
|
|
|
coDot11WDSPortEntry OBJECT-TYPE
|
|
SYNTAX CoDot11WDSPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Entry (conceptual row) in the WDS Port Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11WDSPortIndex - Uniquely identify a WDS port inside the
|
|
WDS table."
|
|
INDEX { ifIndex, coDot11WDSPortIndex }
|
|
::= { coDot11WDSPortTable 1 }
|
|
|
|
CoDot11WDSPortEntry ::= SEQUENCE
|
|
{
|
|
coDot11WDSPortIndex Integer32,
|
|
coDot11WDSPortMacAddress MacAddress,
|
|
coDot11WDSPortCurrentRate Unsigned32,
|
|
coDot11WDSPortSNRLevel Integer32,
|
|
coDot11WDSPortTxPackets Counter32,
|
|
coDot11WDSPortTxDropped Counter32,
|
|
coDot11WDSPortTxErrors Counter32,
|
|
coDot11WDSPortRxPackets Counter32,
|
|
coDot11WDSPortRxDropped Counter32,
|
|
coDot11WDSPortRxErrors Counter32
|
|
}
|
|
|
|
coDot11WDSPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The auxiliary variable used to identify instances of WDS
|
|
ports."
|
|
::= { coDot11WDSPortEntry 1 }
|
|
|
|
coDot11WDSPortMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MAC address of the remote device on the other side of the link."
|
|
::= { coDot11WDSPortEntry 2 }
|
|
|
|
coDot11WDSPortCurrentRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current rate of the WDS port."
|
|
::= { coDot11WDSPortEntry 3 }
|
|
|
|
coDot11WDSPortSNRLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Relative strength of the signal level compared to the noise
|
|
level."
|
|
::= { coDot11WDSPortEntry 4 }
|
|
|
|
coDot11WDSPortTxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets transmitted on this WDS port."
|
|
::= { coDot11WDSPortEntry 5 }
|
|
|
|
coDot11WDSPortTxDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets that could not be transmitted on this WDS
|
|
port."
|
|
::= { coDot11WDSPortEntry 6 }
|
|
|
|
coDot11WDSPortTxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets that could not be sent due to the following
|
|
reasons: Rx retry limit exceeded or Tx discarded because of
|
|
wrong SA."
|
|
::= { coDot11WDSPortEntry 7 }
|
|
|
|
coDot11WDSPortRxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets received on this WDS port."
|
|
::= { coDot11WDSPortEntry 8 }
|
|
|
|
coDot11WDSPortRxDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets that were dropped on this WDS port due to
|
|
a lack of resources."
|
|
::= { coDot11WDSPortEntry 9 }
|
|
|
|
coDot11WDSPortRxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets that could not be received due to the
|
|
following reasons: Rx discards WEP excluded, Rx discards WEP
|
|
ICV error, Rx MSG in bad MSG fragments, Rx MSG in MSG fragments
|
|
Rx WEP undecryptable, Rx FCS errors."
|
|
::= { coDot11WDSPortEntry 10 }
|
|
|
|
-- *** End of WDS port Table **************************************************
|
|
|
|
|
|
-- *** Scan Table *************************************************************
|
|
coDot11ScanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11ScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Conceptual table for the AP scanning results. In tabular form
|
|
to allow multiple instances on an agent. This table is not
|
|
supported on the WCB-200."
|
|
::= { coDot11ap 7 }
|
|
|
|
coDot11ScanEntry OBJECT-TYPE
|
|
SYNTAX CoDot11ScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Entry (conceptual row) in the AP scan Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by ifIndex.
|
|
|
|
coDot11ScanIndex - Uniquely identify an AP in the scan Table."
|
|
INDEX { ifIndex, coDot11ScanIndex }
|
|
::= { coDot11ScanTable 1 }
|
|
|
|
CoDot11ScanEntry ::= SEQUENCE
|
|
{
|
|
coDot11ScanIndex Integer32,
|
|
coDot11ScanMacAddress MacAddress,
|
|
coDot11ScanChannel Integer32,
|
|
coDot11ScanSSID ColubrisSSIDOrNone,
|
|
coDot11ScanSignalLevel Integer32,
|
|
coDot11ScanNoiseLevel Integer32,
|
|
coDot11ScanSNR Integer32,
|
|
coDot11ScanStatus INTEGER,
|
|
coDot11ScanPHYType INTEGER,
|
|
coDot11ScanInactivityTime TimeTicks
|
|
}
|
|
|
|
coDot11ScanIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The auxiliary variable used to identify instances of AP in the
|
|
scan table."
|
|
::= { coDot11ScanEntry 1 }
|
|
|
|
coDot11ScanMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The wireless MAC address of the remote device."
|
|
::= { coDot11ScanEntry 2 }
|
|
|
|
coDot11ScanChannel OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating frequency channel of the remote device."
|
|
::= { coDot11ScanEntry 3 }
|
|
|
|
coDot11ScanSSID OBJECT-TYPE
|
|
SYNTAX ColubrisSSIDOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Service Set ID broadcast by the remote device."
|
|
::= { coDot11ScanEntry 4 }
|
|
|
|
coDot11ScanSignalLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Strength of the wireless signal."
|
|
::= { coDot11ScanEntry 5 }
|
|
|
|
coDot11ScanNoiseLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Level of local background noise."
|
|
::= { coDot11ScanEntry 6 }
|
|
|
|
coDot11ScanSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Relative strength of the signal level compared to the noise
|
|
level."
|
|
::= { coDot11ScanEntry 7 }
|
|
|
|
coDot11ScanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
authorized(1),
|
|
unauthorized(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the scanned device.
|
|
'unknown': The device could not determine the
|
|
status of the scanned AP.
|
|
'authorized': The AP is part of the authorized list of APs.
|
|
'unauthorized': The AP is not part of the authorized
|
|
list of APs."
|
|
::= { coDot11ScanEntry 8 }
|
|
|
|
coDot11ScanPHYType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ieee802dot11a(1),
|
|
ieee802dot11b(2),
|
|
ieee802dot11g(3),
|
|
ieee802dot11na(4),
|
|
ieee802dot11ng(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Radio type used by the device."
|
|
::= { coDot11ScanEntry 9 }
|
|
|
|
coDot11ScanInactivityTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elapsed time since the last beacon was seen for this device."
|
|
::= { coDot11ScanEntry 10 }
|
|
|
|
|
|
-- *** End of Scan Table ******************************************************
|
|
|
|
|
|
-- *** Configuration of the AP Scan process ***********************************
|
|
coDot11ScanEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies if periodic scan should be performed or not.
|
|
Not supported on the WCB-200.
|
|
|
|
'enable': Enables periodic scans on this device.
|
|
|
|
'disable': Disable periodic scans on this device."
|
|
::= { coDot11ap 8 }
|
|
|
|
coDot11ScanPeriodicity OBJECT-TYPE
|
|
SYNTAX Integer32 (10..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the time between periodic scans. Each time a scan
|
|
operation is performed, only one frequency is scanned. A fair
|
|
amount of periodic scans are needed in order complete a full
|
|
scan of all the supported frequencies. This parameter only
|
|
applies when coDot11ScanEnabled is set to 'enable'.
|
|
Not supported on the WCB-200."
|
|
DEFVAL { 600 }
|
|
::= { coDot11ap 9 }
|
|
|
|
coDot11ScanAuthorizedListURL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the URL of the file that contains a list of all
|
|
authorized access points. If no valid URL is present in this
|
|
field, the AP will no be able to compute the rogue table.
|
|
The format of this file is XML. Each entry in the file
|
|
is composed of two items: MAC address and SSID. Each
|
|
entry should appear on a new line. Not supported on the
|
|
WCB-200."
|
|
::= { coDot11ap 10 }
|
|
|
|
coDot11UnauthorizedAPNotificationEnabled OBJECT-TYPE
|
|
SYNTAX ColubrisNotificationEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies if periodic coDot11UnauthorizedAPNotification events
|
|
are generated. Not supported on the WCB-200."
|
|
DEFVAL { enable }
|
|
::= { coDot11ap 11 }
|
|
|
|
coDot11UnauthorizedAPNotificationInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000000)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Interval in minutes between unauthorized AP notifications.
|
|
Not supported on the WCB-200."
|
|
::= { coDot11ap 12 }
|
|
|
|
coDot11AssociationNotificationEnabled OBJECT-TYPE
|
|
SYNTAX ColubrisNotificationEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies if coDot11AssociationNotification events are
|
|
generated. Not supported on the WCB-200."
|
|
DEFVAL { disable }
|
|
::= { coDot11ap 13 }
|
|
|
|
coDot11AssociationNotificationInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000000)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Interval in minutes between association notifications.
|
|
Setting this attribute to 0 will disable periodic sending
|
|
of association notification. Not supported on the WCB-200."
|
|
::= { coDot11ap 14 }
|
|
|
|
-- *** End of Configuration of the AP Scan process ****************************
|
|
|
|
-- *** Station HT Table ******************************************************
|
|
coDot11StationHTTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11StationHTEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group containing attributes related to HT stations.
|
|
This table is not supported on the WCB-200."
|
|
::= { coDot11ap 15 }
|
|
|
|
coDot11StationHTEntry OBJECT-TYPE
|
|
SYNTAX CoDot11StationHTEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the station HT Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11AssociationIndex - Uniquely identify a device inside the
|
|
association table."
|
|
AUGMENTS { coDot11AssociationEntry }
|
|
::= { coDot11StationHTTable 1 }
|
|
|
|
CoDot11StationHTEntry ::= SEQUENCE
|
|
{
|
|
coDot11StaTransmitMCS Unsigned32,
|
|
coDot11StaReceiveMCS Unsigned32,
|
|
coDot11StaChannelWidth INTEGER,
|
|
coDot11StaShortGI TruthValue,
|
|
coDot11StaPktsTxMCS0 Counter32,
|
|
coDot11StaPktsTxMCS1 Counter32,
|
|
coDot11StaPktsTxMCS2 Counter32,
|
|
coDot11StaPktsTxMCS3 Counter32,
|
|
coDot11StaPktsTxMCS4 Counter32,
|
|
coDot11StaPktsTxMCS5 Counter32,
|
|
coDot11StaPktsTxMCS6 Counter32,
|
|
coDot11StaPktsTxMCS7 Counter32,
|
|
coDot11StaPktsTxMCS8 Counter32,
|
|
coDot11StaPktsTxMCS9 Counter32,
|
|
coDot11StaPktsTxMCS10 Counter32,
|
|
coDot11StaPktsTxMCS11 Counter32,
|
|
coDot11StaPktsTxMCS12 Counter32,
|
|
coDot11StaPktsTxMCS13 Counter32,
|
|
coDot11StaPktsTxMCS14 Counter32,
|
|
coDot11StaPktsTxMCS15 Counter32,
|
|
coDot11StaPktsRxMCS0 Counter32,
|
|
coDot11StaPktsRxMCS1 Counter32,
|
|
coDot11StaPktsRxMCS2 Counter32,
|
|
coDot11StaPktsRxMCS3 Counter32,
|
|
coDot11StaPktsRxMCS4 Counter32,
|
|
coDot11StaPktsRxMCS5 Counter32,
|
|
coDot11StaPktsRxMCS6 Counter32,
|
|
coDot11StaPktsRxMCS7 Counter32,
|
|
coDot11StaPktsRxMCS8 Counter32,
|
|
coDot11StaPktsRxMCS9 Counter32,
|
|
coDot11StaPktsRxMCS10 Counter32,
|
|
coDot11StaPktsRxMCS11 Counter32,
|
|
coDot11StaPktsRxMCS12 Counter32,
|
|
coDot11StaPktsRxMCS13 Counter32,
|
|
coDot11StaPktsRxMCS14 Counter32,
|
|
coDot11StaPktsRxMCS15 Counter32
|
|
}
|
|
|
|
coDot11StaTransmitMCS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MSC used while trasnmitting the last frame to the HT
|
|
station."
|
|
::= { coDot11StationHTEntry 1 }
|
|
|
|
coDot11StaReceiveMCS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MCS used by the last frame received from the HT station."
|
|
::= { coDot11StationHTEntry 2 }
|
|
|
|
coDot11StaChannelWidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cw20MHz(1),
|
|
cw40MHz(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Channel width used by the wireless client."
|
|
::= { coDot11StationHTEntry 3 }
|
|
|
|
coDot11StaShortGI OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the wireless client is using short GI."
|
|
::= { coDot11StationHTEntry 4 }
|
|
|
|
coDot11StaPktsTxMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS0."
|
|
::= { coDot11StationHTEntry 5 }
|
|
|
|
coDot11StaPktsTxMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS1."
|
|
::= { coDot11StationHTEntry 6 }
|
|
|
|
coDot11StaPktsTxMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS2."
|
|
::= { coDot11StationHTEntry 7 }
|
|
|
|
coDot11StaPktsTxMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS3."
|
|
::= { coDot11StationHTEntry 8 }
|
|
|
|
coDot11StaPktsTxMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS4."
|
|
::= { coDot11StationHTEntry 9 }
|
|
|
|
coDot11StaPktsTxMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS5."
|
|
::= { coDot11StationHTEntry 10 }
|
|
|
|
coDot11StaPktsTxMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS6."
|
|
::= { coDot11StationHTEntry 11 }
|
|
|
|
coDot11StaPktsTxMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS7."
|
|
::= { coDot11StationHTEntry 12 }
|
|
|
|
coDot11StaPktsTxMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS8."
|
|
::= { coDot11StationHTEntry 13 }
|
|
|
|
coDot11StaPktsTxMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS9."
|
|
::= { coDot11StationHTEntry 14 }
|
|
|
|
coDot11StaPktsTxMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS10."
|
|
::= { coDot11StationHTEntry 15 }
|
|
|
|
coDot11StaPktsTxMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS11."
|
|
::= { coDot11StationHTEntry 16 }
|
|
|
|
coDot11StaPktsTxMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS12."
|
|
::= { coDot11StationHTEntry 17 }
|
|
|
|
coDot11StaPktsTxMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS13."
|
|
::= { coDot11StationHTEntry 18 }
|
|
|
|
coDot11StaPktsTxMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS14."
|
|
::= { coDot11StationHTEntry 19 }
|
|
|
|
coDot11StaPktsTxMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmitted frames while using MCS15."
|
|
::= { coDot11StationHTEntry 20 }
|
|
|
|
coDot11StaPktsRxMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS0."
|
|
::= { coDot11StationHTEntry 21 }
|
|
|
|
coDot11StaPktsRxMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS1."
|
|
::= { coDot11StationHTEntry 22 }
|
|
|
|
coDot11StaPktsRxMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS2."
|
|
::= { coDot11StationHTEntry 23 }
|
|
|
|
coDot11StaPktsRxMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS3."
|
|
::= { coDot11StationHTEntry 24 }
|
|
|
|
coDot11StaPktsRxMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS4."
|
|
::= { coDot11StationHTEntry 25 }
|
|
|
|
coDot11StaPktsRxMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS5."
|
|
::= { coDot11StationHTEntry 26 }
|
|
|
|
coDot11StaPktsRxMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS6."
|
|
::= { coDot11StationHTEntry 27 }
|
|
|
|
coDot11StaPktsRxMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS7."
|
|
::= { coDot11StationHTEntry 28 }
|
|
|
|
coDot11StaPktsRxMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS8."
|
|
::= { coDot11StationHTEntry 29 }
|
|
|
|
coDot11StaPktsRxMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS9."
|
|
::= { coDot11StationHTEntry 30 }
|
|
|
|
coDot11StaPktsRxMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS10."
|
|
::= { coDot11StationHTEntry 31 }
|
|
|
|
coDot11StaPktsRxMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS11."
|
|
::= { coDot11StationHTEntry 32 }
|
|
|
|
coDot11StaPktsRxMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS12."
|
|
::= { coDot11StationHTEntry 33 }
|
|
|
|
coDot11StaPktsRxMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS13."
|
|
::= { coDot11StationHTEntry 34 }
|
|
|
|
coDot11StaPktsRxMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS14."
|
|
::= { coDot11StationHTEntry 35 }
|
|
|
|
coDot11StaPktsRxMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received frames while using MCS15."
|
|
::= { coDot11StationHTEntry 36 }
|
|
|
|
-- *** End of Station HT Table ***********************************************
|
|
|
|
|
|
-- *** MAC Attribute Templates ************************************************
|
|
|
|
|
|
-- *** Operation Table ********************************************************
|
|
coDot11OperationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11OperationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group contains MAC attributes pertaining to the operation of
|
|
the MAC. In tabular form to allow multiple instances on an
|
|
agent."
|
|
::= { coDot11mac 1 }
|
|
|
|
coDot11OperationEntry OBJECT-TYPE
|
|
SYNTAX CoDot11OperationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11OperationEntry Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11OperationTable 1 }
|
|
|
|
CoDot11OperationEntry ::= SEQUENCE
|
|
{
|
|
coDot11MACAddress MacAddress,
|
|
coDot11RTSThreshold Integer32,
|
|
coDot11ShortRetryLimit Integer32,
|
|
coDot11LongRetryLimit Integer32,
|
|
coDot11FragmentationThreshold Integer32,
|
|
coDot11MaxTransmitMSDULifetime Unsigned32,
|
|
coDot11MaxReceiveLifetime Unsigned32,
|
|
coDot11ManufacturerID DisplayString,
|
|
coDot11ProductID DisplayString,
|
|
coDot11RadioType ColubrisRadioType
|
|
}
|
|
|
|
coDot11MACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Unique MAC Address assigned to the STA."
|
|
::= { coDot11OperationEntry 1 }
|
|
|
|
coDot11RTSThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (128..1540|2347)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicated the number of octets in an MPDU,
|
|
below which an RTS/CTS handshake is not performed. An
|
|
RTS/CTS handshake is performed at the beginning of any
|
|
frame exchange sequence where the MPDU is of type Data or
|
|
Management, the MPDU has an individual address in the Address1
|
|
field, and the length of the MPDU is greater than
|
|
this threshold. (For additional details, refer to Table 21 in
|
|
9.7.) Setting this attribute to be larger than the maximum
|
|
MSDU size has the effect of turning off the RTS/CTS
|
|
handshake for frames of Data or Management type transmitted by
|
|
this STA. The default value of this attribute is 2347."
|
|
::= { coDot11OperationEntry 2 }
|
|
|
|
coDot11ShortRetryLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the maximum number of transmission attempts of a
|
|
frame, the length of which is less than or equal to
|
|
coDot11RTSThreshold, that are made before a failure condition
|
|
is indicated. The default value of this attribute is 7."
|
|
::= { coDot11OperationEntry 3 }
|
|
|
|
coDot11LongRetryLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the maximum number of transmission attempts of a
|
|
frame, the length of which is greater than
|
|
coDot11RTSThreshold, that shall be made before a
|
|
failure condition is indicated. The default value of this
|
|
attribute is 4."
|
|
::= { coDot11OperationEntry 4 }
|
|
|
|
coDot11FragmentationThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (256..2346)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the current maximum size, in octets, of the MPDU
|
|
that may be delivered to the PHY. An MSDU is broken down into
|
|
fragments if its size exceeds the value of this attribute
|
|
after adding MAC headers and trailers. An MSDU or MMPDU is
|
|
fragmented when the resulting frame has an individual address
|
|
in the Address1 field, and the length of the frame is larger
|
|
than this threshold. The default value for this attribute is
|
|
the lesser of 2346 or the aMPDUMaxLength of the attached PHY
|
|
and will never exceed the lesser of 2346 or the aMPDUMaxLength
|
|
of the attached PHY. The value of this attribute will never
|
|
be less than 256. "
|
|
::= { coDot11OperationEntry 5 }
|
|
|
|
coDot11MaxTransmitMSDULifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elapsed time in TU after the initial transmission of an MSDU,
|
|
after which further attempts to transmit the MSDU are
|
|
terminated. The default value of this attribute is 512."
|
|
::= { coDot11OperationEntry 6 }
|
|
|
|
coDot11MaxReceiveLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elapsed time in TU, after the initial reception of a
|
|
fragmented MMPDU or MSDU, after which further attempts to
|
|
reassemble the MMPDU or MSDU is terminated. The default
|
|
value is 512."
|
|
::= { coDot11OperationEntry 7 }
|
|
|
|
coDot11ManufacturerID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The name of the manufacturer. It may include additional
|
|
information at the manufacturer's discretion. The default
|
|
value of this attribute is null."
|
|
::= { coDot11OperationEntry 8 }
|
|
|
|
coDot11ProductID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An identifier that is unique to the manufacturer. It may
|
|
include additional information at the manufacturer's
|
|
discretion. The default value is null."
|
|
::= { coDot11OperationEntry 9 }
|
|
|
|
coDot11RadioType OBJECT-TYPE
|
|
SYNTAX ColubrisRadioType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identify the wireless device inside the Colubris product."
|
|
::= { coDot11OperationEntry 10 }
|
|
|
|
-- *** End of Operation Table *************************************************
|
|
|
|
|
|
-- *** Counters Table *********************************************************
|
|
coDot11CountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11CountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group containing attributes that are MAC counters. In tabular
|
|
form to allow multiple instance on an agent."
|
|
::= { coDot11mac 2 }
|
|
|
|
coDot11CountersEntry OBJECT-TYPE
|
|
SYNTAX CoDot11CountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11CountersEntry Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11CountersTable 1 }
|
|
|
|
CoDot11CountersEntry ::= SEQUENCE
|
|
{
|
|
coDot11TransmittedFragmentCount Counter32,
|
|
coDot11MulticastTransmittedFrameCount Counter32,
|
|
coDot11FailedCount Counter32,
|
|
coDot11RetryCount Counter32,
|
|
coDot11MultipleRetryCount Counter32,
|
|
coDot11FrameDuplicateCount Counter32,
|
|
coDot11RTSSuccessCount Counter32,
|
|
coDot11RTSFailureCount Counter32,
|
|
coDot11ACKFailureCount Counter32,
|
|
coDot11ReceivedFragmentCount Counter32,
|
|
coDot11MulticastReceivedFrameCount Counter32,
|
|
coDot11FCSErrorCount Counter32,
|
|
coDot11TransmittedFrameCount Counter32,
|
|
coDot11WEPUndecryptableCount Counter32
|
|
}
|
|
|
|
coDot11TransmittedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented for an acknowledged MPDU
|
|
with an individual address in the address 1 field or an MPDU
|
|
with a multicast address in the address 1 field of type Data
|
|
or Management."
|
|
::= { coDot11CountersEntry 1 }
|
|
|
|
coDot11MulticastTransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented only when the multicast bit is set
|
|
in the destination MAC address of a successfully transmitted
|
|
MSDU. When operating as a STA in an ESS, where these frames
|
|
are directed to the AP, this implies having received an
|
|
acknowledgment to all associated MPDUs."
|
|
::= { coDot11CountersEntry 2 }
|
|
|
|
coDot11FailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when an MSDU is not transmitted
|
|
successfully due to the number of transmit attempts exceeding
|
|
either the coDot11ShortRetryLimit or coDot11LongRetryLimit."
|
|
::= { coDot11CountersEntry 3 }
|
|
|
|
coDot11RetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when an MSDU is successfully
|
|
transmitted after one or more retransmissions."
|
|
::= { coDot11CountersEntry 4 }
|
|
|
|
coDot11MultipleRetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when an MSDU is successfully
|
|
transmitted after more than one retransmission."
|
|
::= { coDot11CountersEntry 5 }
|
|
|
|
coDot11FrameDuplicateCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when a frame is received
|
|
that the Sequence Control field indicates is a
|
|
duplicate."
|
|
::= { coDot11CountersEntry 6 }
|
|
|
|
coDot11RTSSuccessCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when a CTS is received in
|
|
response to an RTS."
|
|
::= { coDot11CountersEntry 7 }
|
|
|
|
coDot11RTSFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when a CTS is not received in
|
|
response to an RTS."
|
|
::= { coDot11CountersEntry 8 }
|
|
|
|
coDot11ACKFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when an ACK is not received
|
|
when expected."
|
|
::= { coDot11CountersEntry 9 }
|
|
|
|
coDot11ReceivedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented for each successfully
|
|
received MPDU of type Data or Management."
|
|
::= { coDot11CountersEntry 10 }
|
|
|
|
coDot11MulticastReceivedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when a MSDU is received with the
|
|
multicast bit set in the destination MAC address."
|
|
::= { coDot11CountersEntry 11 }
|
|
|
|
coDot11FCSErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when an FCS error is detected in a
|
|
received MPDU."
|
|
::= { coDot11CountersEntry 12 }
|
|
|
|
coDot11TransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented for each successfully transmitted
|
|
MSDU."
|
|
::= { coDot11CountersEntry 13 }
|
|
|
|
coDot11WEPUndecryptableCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This counter is incremented when a frame is received with the
|
|
WEP subfield of the Frame Control field set to one and the
|
|
WEPOn value for the key mapped to the TA's MAC address
|
|
indicates that the frame should not have been encrypted or
|
|
that frame is discarded due to the receiving STA not
|
|
implementing the privacy option."
|
|
::= { coDot11CountersEntry 14 }
|
|
|
|
-- *** End of Counters Table **************************************************
|
|
|
|
|
|
-- *** PHY Attribute Templates ************************************************
|
|
|
|
-- *** Phy Operation Table ****************************************************
|
|
coDot11PhyOperationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PhyOperationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PHY level attributes concerned with operation. In tabular form
|
|
to allow multiple instances on an agent."
|
|
::= { coDot11phy 1 }
|
|
|
|
coDot11PhyOperationEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PhyOperationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PhyOperation Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11PhyOperationTable 1 }
|
|
|
|
CoDot11PhyOperationEntry ::= SEQUENCE
|
|
{
|
|
coDot11PHYType INTEGER,
|
|
coDot11CurrentRegDomain Integer32,
|
|
coDot11TempType INTEGER,
|
|
coDot11CurrentOperFrequency Unsigned32,
|
|
coDot11CurrentOperPHYType INTEGER,
|
|
coDot11Sensitivity INTEGER,
|
|
coDot11RadioEnabled TruthValue,
|
|
coDot11OperatingMode INTEGER,
|
|
coDot11AutoChannelEnabled TruthValue,
|
|
coDot11AutoChannelInterval INTEGER,
|
|
coDot11AutoPowerEnabled TruthValue,
|
|
coDot11AutoPowerInterval INTEGER
|
|
}
|
|
|
|
coDot11PHYType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fhss(1),
|
|
dsss(2),
|
|
irbaseband(3),
|
|
ofdm(4),
|
|
ht(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is an 8-bit integer value that identifies the PHY type
|
|
supported by the attached PLCP and PMD. Currently defined
|
|
values and their corresponding PHY types are:
|
|
FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03,
|
|
OFDM 5 GHz = 04"
|
|
::= { coDot11PhyOperationEntry 1 }
|
|
|
|
coDot11CurrentRegDomain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current regulatory domain this instance of the PMD is
|
|
supporting. This object corresponds to one of the RegDomains
|
|
listed in coDot11RegDomainsSupported."
|
|
::= { coDot11PhyOperationEntry 2 }
|
|
|
|
coDot11TempType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
tempType1(1),
|
|
tempType2(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "There are different operating temperature requirements
|
|
dependent on the anticipated environmental conditions. This
|
|
attribute describes the current PHY's operating temperature
|
|
range capability. Currently defined values and their
|
|
corresponding temperature ranges are:
|
|
|
|
Type 1 = X'01'-Commercial range of 0 to 40 degrees C,
|
|
|
|
Type 2 = X'02'-Industrial range of -30 to 70 degrees C."
|
|
::= { coDot11PhyOperationEntry 3 }
|
|
|
|
coDot11CurrentOperFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operating frequency channel of the radio."
|
|
::= { coDot11PhyOperationEntry 4 }
|
|
|
|
coDot11CurrentOperPHYType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ieee802dot11a(1),
|
|
ieee802dot11b(2),
|
|
ieee802dot11g(3),
|
|
ieee802dot11bAndg(4),
|
|
ieee802dot11aTurbo(5),
|
|
ieee802dot11n(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operating phy type of the radio."
|
|
::= { coDot11PhyOperationEntry 5 }
|
|
|
|
coDot11Sensitivity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
large(1),
|
|
medium(2),
|
|
small(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Receiver sensitivity of the radio."
|
|
::= { coDot11PhyOperationEntry 6 }
|
|
|
|
coDot11RadioEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When True the radio is enabled."
|
|
::= { coDot11PhyOperationEntry 7 }
|
|
|
|
coDot11OperatingMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
accessPointAndWirelessLinks(1),
|
|
accessPointOnly(2),
|
|
wirelessLinksOnly(3),
|
|
monitor(4),
|
|
sensor(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operating mode of the radio. Available options are:
|
|
|
|
Access point and Wireless links:
|
|
Standard operating mode provides support for all wireless functions.
|
|
|
|
Access point only:
|
|
Only provides access point functionality, wireless links cannot be created.
|
|
|
|
Wireless links only:
|
|
Only provides wireless links functionality. Wireless client stations cannot connect.
|
|
|
|
Monitor:
|
|
Enables the radio to be used for monitoring (wireless neighborhood) only.
|
|
Both access point and wireless links functionality are disabled.
|
|
|
|
Sensor:
|
|
Enables the radio to be used for monitoring only."
|
|
::= { coDot11PhyOperationEntry 8 }
|
|
|
|
coDot11AutoChannelEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When True the Auto Channel option is enabled."
|
|
::= { coDot11PhyOperationEntry 9 }
|
|
|
|
coDot11AutoChannelInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
timeOfDay(1),
|
|
oneHour(60),
|
|
twoHours(120),
|
|
fourHours(240),
|
|
eightHours(480),
|
|
twelveHours(720),
|
|
tweentyFourHours(1440)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval, in minutes, between auto rescanning of the channels.
|
|
Maximum is 1440 minutes (24 hours). A value of zero disables automatic
|
|
rescanning of channels, the radio will automatically select a channel
|
|
when the interface intializes and utilize that channel as long as the
|
|
interface is operational."
|
|
::= { coDot11PhyOperationEntry 10 }
|
|
|
|
coDot11AutoPowerEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When True the Auto Power option is enabled."
|
|
::= { coDot11PhyOperationEntry 11 }
|
|
|
|
coDot11AutoPowerInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
oneHour(60),
|
|
twoHours(120),
|
|
fourHours(240),
|
|
eightHours(480),
|
|
twelveHours(720),
|
|
tweentyFourHours(1440)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval, in minutes, between auto rescanning of the channels.
|
|
Maximum is 1440 minutes (24 hours)."
|
|
::= { coDot11PhyOperationEntry 12 }
|
|
|
|
|
|
-- *** End of Phy Operation Table *********************************************
|
|
|
|
|
|
-- *** Phy Antenna Table ******************************************************
|
|
coDot11PhyAntennaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PhyAntennaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group of attributes for PhyAntenna. In tabular form to allow
|
|
multiple instances on an agent."
|
|
::= { coDot11phy 2 }
|
|
|
|
coDot11PhyAntennaEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PhyAntennaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PhyAntenna Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11PhyAntennaTable 1 }
|
|
|
|
CoDot11PhyAntennaEntry ::= SEQUENCE
|
|
{
|
|
coDot11CurrentTxAntenna Integer32,
|
|
coDot11DiversitySupport INTEGER,
|
|
coDot11CurrentRxAntenna Integer32
|
|
}
|
|
|
|
coDot11CurrentTxAntenna OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current antenna being used to transmit. This value is one
|
|
of the values appearing in coDot11SupportedTxAntenna. This may
|
|
be used by a management agent to control which antenna is used
|
|
for transmission."
|
|
::= { coDot11PhyAntennaEntry 1 }
|
|
|
|
coDot11DiversitySupport OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fixedlist(1),
|
|
notsupported(2),
|
|
dynamic(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This implementation's support for diversity, encoded as:
|
|
|
|
X'01': Diversity is available and is performed over the fixed
|
|
list of antennas defined in coDot11DiversitySelectionRx.
|
|
|
|
X'02': Diversity is not supported.
|
|
|
|
X'03': Diversity is supported and control of diversity is also
|
|
available, in which case the attribute
|
|
coDot11DiversitySelectionRx can be dynamically modified
|
|
by the LME."
|
|
::= { coDot11PhyAntennaEntry 2 }
|
|
|
|
coDot11CurrentRxAntenna OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current antenna being used to receive, if the coDot11
|
|
DiversitySupport indicates that diversity is not supported.
|
|
The selected antenna shall be one of the antennae marked for
|
|
receive in the coDot11AntennasListTable."
|
|
::= { coDot11PhyAntennaEntry 3 }
|
|
|
|
-- *** End of Phy Antenna Table ***********************************************
|
|
|
|
|
|
-- *** Phy Config Table *******************************************************
|
|
coDot11PhyConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PhyConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PHY configuration attributes. In tabular form to allow
|
|
multiple instances on an agent."
|
|
::= { coDot11phy 3 }
|
|
|
|
coDot11PhyConfigEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PhyConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PhyConfig Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11PhyConfigTable 1 }
|
|
|
|
CoDot11PhyConfigEntry ::= SEQUENCE
|
|
{
|
|
coDot11PhyAdminStatus INTEGER,
|
|
coDot11PhyOperStatus INTEGER
|
|
}
|
|
|
|
coDot11PhyAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1), -- ready to pass packets
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired state of the radio interface.
|
|
'up': Sets the radio interface to be ready to pass packets.
|
|
'down': Stops the transmit and receive of packets on
|
|
the interface."
|
|
::= { coDot11PhyConfigEntry 1 }
|
|
|
|
coDot11PhyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1), -- ready to pass packets
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current state of the radio interface.
|
|
|
|
'up': The radio interface is ready to pass packets.
|
|
|
|
'down': The radio is not able to transmit nor receive
|
|
packets on the interface."
|
|
::= { coDot11PhyConfigEntry 2 }
|
|
|
|
-- *** End of Phy Config Table ************************************************
|
|
|
|
|
|
-- *** Phy DSSS Table *********************************************************
|
|
coDot11PhyDSSSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PhyDSSSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of attributes for coDot11PhyDSSSEntry. In tabular form
|
|
to allow multiple instances on an agent. This table only apply
|
|
when in DSSS 2.4 GHz range"
|
|
::= { coDot11phy 4 }
|
|
|
|
coDot11PhyDSSSEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PhyDSSSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PhyDSSSEntry Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11PhyDSSSTable 1 }
|
|
|
|
CoDot11PhyDSSSEntry ::= SEQUENCE
|
|
{
|
|
coDot11CurrentChannel Integer32,
|
|
coDot11CCAModeSupported Integer32,
|
|
coDot11CurrentCCAMode INTEGER
|
|
}
|
|
|
|
coDot11CurrentChannel OBJECT-TYPE
|
|
SYNTAX Integer32 (1..14)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired operating frequency channel of the DSSS PHY. Valid
|
|
channel numbers are as defined in 15.4.6.2."
|
|
::= { coDot11PhyDSSSEntry 1 }
|
|
|
|
coDot11CCAModeSupported OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "coDot11CCAModeSupported is a bit-significant value,
|
|
representing all of the CCA modes supported by the PHY.
|
|
Valid values are:
|
|
|
|
energy detect only (ED_ONLY) = 01,
|
|
|
|
carrier sense only (CS_ONLY) = 02,
|
|
|
|
carrier sense and energy detect (ED_and_CS)= 04
|
|
|
|
or the logical sum of any of these values."
|
|
::= { coDot11PhyDSSSEntry 2 }
|
|
|
|
coDot11CurrentCCAMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
edonly(1),
|
|
csonly(2),
|
|
edandcs(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current CCA method in operation.
|
|
Valid values are:
|
|
energy detect only (edonly) = 01,
|
|
|
|
carrier sense only (csonly) = 02,
|
|
|
|
carrier sense and energy detect (edandcs)= 04."
|
|
::= { coDot11PhyDSSSEntry 3 }
|
|
|
|
-- *** End of Phy DSSS Table **************************************************
|
|
|
|
|
|
-- *** Regulation Domains Supported *******************************************
|
|
coDot11RegDomainsSupportedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11RegDomainsSupportedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "There are different operational requirements dependent on
|
|
the regulatory domain. This attribute list describes the
|
|
regulatory domains the PLCP and PMD support in this
|
|
implementation. Currently defined values and their
|
|
corresponding Regulatory Domains are:
|
|
FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of
|
|
Europe) = X'30', Spain = X'31', France = X'32',
|
|
Japan = X'41' "
|
|
::= { coDot11phy 5 }
|
|
|
|
coDot11RegDomainsSupportedEntry OBJECT-TYPE
|
|
SYNTAX CoDot11RegDomainsSupportedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11RegDomainsSupported Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11RegDomainsSupportIndex - Uniquely specifies the
|
|
regulatory domain in the
|
|
table."
|
|
INDEX { ifIndex, coDot11RegDomainsSupportIndex }
|
|
::= { coDot11RegDomainsSupportedTable 1 }
|
|
|
|
CoDot11RegDomainsSupportedEntry ::= SEQUENCE
|
|
{
|
|
coDot11RegDomainsSupportIndex Integer32,
|
|
coDot11RegDomainsSupportValue INTEGER
|
|
}
|
|
|
|
coDot11RegDomainsSupportIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The auxiliary variable used to identify instances of the
|
|
columnar objects in the RegDomainsSupported Table."
|
|
::= { coDot11RegDomainsSupportedEntry 1 }
|
|
|
|
coDot11RegDomainsSupportValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fcc(16),
|
|
doc(32),
|
|
etsi(48),
|
|
spain (49),
|
|
france(50),
|
|
japan (65)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "There are different operational requirements dependent on
|
|
the regulatory domain. This attribute list describes the
|
|
regulatory domains the PLCP and PMD support in this
|
|
implementation. Currently defined values and their
|
|
corresponding Regulatory Domains are:
|
|
FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of
|
|
Europe) = X'30', Spain = X'31', France = X'32',
|
|
Japan = X'41' "
|
|
::= { coDot11RegDomainsSupportedEntry 2 }
|
|
|
|
-- *** End of Regulation Domains Supported ************************************
|
|
|
|
|
|
-- *** Antennas List Table ****************************************************
|
|
coDot11AntennasListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11AntennasListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table represents the list of antennae. An antenna can be
|
|
marked to be capable of transmitting, receiving, and/or for
|
|
participation in receive diversity. Each entry in this table
|
|
represents a single antenna with its properties. The maximum
|
|
number of antennae that can be contained in this table is 255."
|
|
::= { coDot11phy 6 }
|
|
|
|
coDot11AntennasListEntry OBJECT-TYPE
|
|
SYNTAX CoDot11AntennasListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11AntennasListTable, representing the
|
|
properties of a single antenna.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11AntennaListIndex - Uniquely identifies the antenna
|
|
connected to the 802.11 interface."
|
|
INDEX { ifIndex, coDot11AntennaListIndex }
|
|
::= { coDot11AntennasListTable 1 }
|
|
|
|
CoDot11AntennasListEntry ::= SEQUENCE
|
|
{
|
|
coDot11AntennaListIndex Integer32,
|
|
coDot11SupportedTxAntenna TruthValue,
|
|
coDot11SupportedRxAntenna TruthValue,
|
|
coDot11DiversitySelectionRx TruthValue
|
|
}
|
|
|
|
coDot11AntennaListIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The unique index of an antenna which is used to identify the
|
|
columnar objects in the coDot11AntennasList Table."
|
|
::= { coDot11AntennasListEntry 1 }
|
|
|
|
coDot11SupportedTxAntenna OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When true, this object indicates that the antenna represented
|
|
by coDot11AntennaIndex can be used as a transmit antenna."
|
|
::= { coDot11AntennasListEntry 2 }
|
|
|
|
coDot11SupportedRxAntenna OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When true, this object indicates that the antenna represented
|
|
by the coDot11AntennaIndex can be used as a receive antenna."
|
|
::= { coDot11AntennasListEntry 3 }
|
|
|
|
coDot11DiversitySelectionRx OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When true, this object indicates that the antenna represented
|
|
by coDot11AntennaIndex can be used for receive diversity.
|
|
This object may only be true if the antenna can be used
|
|
as a receive antenna, as indicated by
|
|
coDot11SupportedRxAntenna."
|
|
::= { coDot11AntennasListEntry 4 }
|
|
|
|
-- *** End of Antennas List Table *********************************************
|
|
|
|
|
|
-- *** Supported Data Rates Tx ************************************************
|
|
coDot11SupportedDataRatesTxTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11SupportedDataRatesTxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, data
|
|
rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject
|
|
to limitations of each individual PHY."
|
|
::= { coDot11phy 7 }
|
|
|
|
coDot11SupportedDataRatesTxEntry OBJECT-TYPE
|
|
SYNTAX CoDot11SupportedDataRatesTxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Entry (conceptual row) in the coDot11SupportedDataRatesTx
|
|
Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11SupportedDataRatesTxIndex - Uniquely identifies a
|
|
supported rate in the
|
|
table."
|
|
INDEX { ifIndex, coDot11SupportedDataRatesTxIndex }
|
|
::= { coDot11SupportedDataRatesTxTable 1 }
|
|
|
|
CoDot11SupportedDataRatesTxEntry ::= SEQUENCE
|
|
{
|
|
coDot11SupportedDataRatesTxIndex Integer32,
|
|
coDot11SupportedDataRatesTxValue Integer32
|
|
}
|
|
|
|
coDot11SupportedDataRatesTxIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index object which identifies which data rate to access."
|
|
::= { coDot11SupportedDataRatesTxEntry 1 }
|
|
|
|
coDot11SupportedDataRatesTxValue OBJECT-TYPE
|
|
SYNTAX Integer32 (2..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, data
|
|
rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s
|
|
subject to limitations of each individual PHY."
|
|
::= { coDot11SupportedDataRatesTxEntry 2 }
|
|
|
|
-- *** End of Supported Data Rates Tx *****************************************
|
|
|
|
|
|
-- *** Supported Data Rates Rx ************************************************
|
|
coDot11SupportedDataRatesRxTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11SupportedDataRatesRxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The receive bit rates supported by the PLCP and PMD, data
|
|
rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s
|
|
subject to limitations of each individual PHY."
|
|
::= { coDot11phy 8 }
|
|
|
|
coDot11SupportedDataRatesRxEntry OBJECT-TYPE
|
|
SYNTAX CoDot11SupportedDataRatesRxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Entry (conceptual row) in the coDot11SupportedDataRatesRx
|
|
Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex.
|
|
|
|
coDot11SupportedDataRatesTxIndex - Uniquely identifies a
|
|
supported rate in the
|
|
table."
|
|
INDEX { ifIndex, coDot11SupportedDataRatesRxIndex }
|
|
::= { coDot11SupportedDataRatesRxTable 1 }
|
|
|
|
CoDot11SupportedDataRatesRxEntry ::= SEQUENCE
|
|
{
|
|
coDot11SupportedDataRatesRxIndex Integer32,
|
|
coDot11SupportedDataRatesRxValue Integer32
|
|
}
|
|
|
|
coDot11SupportedDataRatesRxIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index object which identifies which data rate to access."
|
|
::= { coDot11SupportedDataRatesRxEntry 1 }
|
|
|
|
coDot11SupportedDataRatesRxValue OBJECT-TYPE
|
|
SYNTAX Integer32 (2..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The receive bit rates supported by the PLCP and PMD, data
|
|
rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s
|
|
subject to limitations of each individual PHY."
|
|
::= { coDot11SupportedDataRatesRxEntry 2 }
|
|
|
|
-- *** End of Supported Data Rates Rx *****************************************
|
|
|
|
|
|
-- *** Phy OFDM Table *********************************************************
|
|
coDot11PhyOFDMTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PhyOFDMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of attributes for coDot11PhyOFDMEntry. In tabular form
|
|
to allow multiple instances on an agent. This table only apply
|
|
when in OFDM 5 GHz range."
|
|
::= { coDot11phy 9 }
|
|
|
|
coDot11PhyOFDMEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PhyOFDMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PhyOFDMEntry Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11PhyOFDMTable 1 }
|
|
|
|
CoDot11PhyOFDMEntry ::= SEQUENCE
|
|
{
|
|
coDot11CurrentFrequency Integer32,
|
|
coDot11TIThreshold Integer32,
|
|
coDot11FrequencyBandsSupported Integer32
|
|
}
|
|
|
|
coDot11CurrentFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired operating frequency channel of the OFDM PHY."
|
|
::= { coDot11PhyOFDMEntry 1 }
|
|
|
|
coDot11TIThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The threshold being used to detect a busy medium (frequency).
|
|
CCA shall report a busy medium upon detecting the RSSI above
|
|
this threshold."
|
|
::= { coDot11PhyOFDMEntry 2 }
|
|
|
|
coDot11FrequencyBandsSupported OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The capability of the OFDM PHY implementation to operate in
|
|
the three U-NII bands. Coded as an integer value of a three bit
|
|
fields as follow:
|
|
|
|
bit 0 .. capable of operating in the lower (5.15-5.25 GHz)
|
|
U-NII band.
|
|
|
|
bit 1 .. capable of operating in the middle (5.25-5.35 GHz)
|
|
U-NII band.
|
|
|
|
bit 2 .. capable of operating in the middle (5.725-5.825 GHz)
|
|
U-NII band.
|
|
|
|
For example, for an implementation capable of operating in the
|
|
lower and middle bands, this attribute would take the value 3."
|
|
::= { coDot11PhyOFDMEntry 3 }
|
|
|
|
-- *** End of Phy OFDM Table **************************************************
|
|
|
|
-- *** PHY General Confifuration attributes ***********************************
|
|
coDot11MinimumSNRLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..92)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An SNR level notification is generated when the average SNR
|
|
level is below this attribute. Not supported on the WCB-200."
|
|
::= { coDot11phy 10 }
|
|
|
|
coDot11SNRLevelNotificationEnabled OBJECT-TYPE
|
|
SYNTAX ColubrisNotificationEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when true, enables the generation of SNR level
|
|
notifications. Not supported on the WCB-200."
|
|
DEFVAL { enable }
|
|
::= { coDot11phy 11 }
|
|
|
|
coDot11SNRLevelNotificationInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000000)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Interval in minutes between SNR Level notifications. Not
|
|
supported on the WCB-200."
|
|
::= { coDot11phy 12 }
|
|
|
|
coDot11CountryCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
world(1),
|
|
albania(8),
|
|
algeria(12),
|
|
azerbaijan(31),
|
|
argentina(32),
|
|
australia(36),
|
|
austria(40),
|
|
bahrain(48),
|
|
armenia(51),
|
|
belgium(56),
|
|
bolivia(68),
|
|
brazil(76),
|
|
belize(84),
|
|
bruneiDarussalam(96),
|
|
bulgaria(100),
|
|
belarus(112),
|
|
canada(124),
|
|
chile(152),
|
|
china(156),
|
|
taiwan(158),
|
|
colombia(170),
|
|
costaRica(188),
|
|
croatia(191),
|
|
cyprus(196),
|
|
czechRepublic(203),
|
|
denmark(208),
|
|
dominicanRepublic(214),
|
|
ecuador(218),
|
|
elSalvador(222),
|
|
estonia(233),
|
|
finland(246),
|
|
france(250),
|
|
georgia(268),
|
|
germany(276),
|
|
greece(300),
|
|
guatemala(320),
|
|
honduras(340),
|
|
hongkong(344),
|
|
hungary(348),
|
|
iceland(352),
|
|
india(356),
|
|
indonesia(360),
|
|
iran(364),
|
|
ireland(372),
|
|
israel(376),
|
|
italy(380),
|
|
japanW52W53(392),
|
|
japanW52W53J52(393),
|
|
japanJ52(395),
|
|
japanJ5280211j(396),
|
|
japanClient(397),
|
|
kazakhstan(398),
|
|
jordan(400),
|
|
kenya(404),
|
|
northKorea(408),
|
|
southKorea(410),
|
|
kuwait(414),
|
|
lebanon(422),
|
|
latvia(428),
|
|
liechtenstein(438),
|
|
lithuania(440),
|
|
luxembourg(442),
|
|
macau(446),
|
|
malaysia(458),
|
|
mexico(484),
|
|
monaco(492),
|
|
morocco(504),
|
|
oman(512),
|
|
netherlands(528),
|
|
newZealand(554),
|
|
norway(578),
|
|
pakistan(586),
|
|
panama(591),
|
|
peru(604),
|
|
philippines(608),
|
|
poland(616),
|
|
portugal(620),
|
|
puertoRico(630),
|
|
qatar(634),
|
|
romania(642),
|
|
russianFederation(643),
|
|
saudiArabia(682),
|
|
singapore(702),
|
|
slovakia(703),
|
|
vietNam(704),
|
|
slovenia(705),
|
|
southAfrica(710),
|
|
zimbabwe(716),
|
|
spain(724),
|
|
sweden(752),
|
|
switzerland(756),
|
|
syria(760),
|
|
thailand(764),
|
|
trinidadAndTobago(780),
|
|
unitedArabEmirates(784),
|
|
tunisia(788),
|
|
turkey(792),
|
|
ukraine(804),
|
|
macedonia(807),
|
|
egypt(818),
|
|
unitedKingdom(826),
|
|
unitedKingdom58GHz(827), -- United Kingdom 5.8GHz licensed
|
|
unitedStates(840),
|
|
uruguay(858),
|
|
uzbekistan(860),
|
|
venezuela(862),
|
|
yemen(887)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The radios are running accordingly to the regulations
|
|
of this country."
|
|
::= { coDot11phy 13 }
|
|
|
|
-- *** Phy HT Table *********************************************************
|
|
coDot11PhyHTTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11PhyHTEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of attributes for coDot11PhyHTEntry. This table only
|
|
apply when the PHY type is HT."
|
|
::= { coDot11phy 14 }
|
|
|
|
coDot11PhyHTEntry OBJECT-TYPE
|
|
SYNTAX CoDot11PhyHTEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11PhyHTEntry Table.
|
|
|
|
ifIndex - Each 802.11 interface is represented by an ifEntry.
|
|
Interface tables in this MIB module are indexed by
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { coDot11PhyHTTable 1 }
|
|
|
|
CoDot11PhyHTEntry ::= SEQUENCE
|
|
{
|
|
coDot11FortyMHzOperationImplemented TruthValue,
|
|
coDot11FortyMHzOperationEnabled TruthValue,
|
|
coDot11CurrentPrimaryChannel Integer32,
|
|
coDot11CurrentSecondaryChannel Integer32,
|
|
coDot11GreenfieldOptionImplemented TruthValue,
|
|
coDot11GreenfieldOptionEnabled TruthValue,
|
|
coDot11ShortGIOptionInTwentyImplemented TruthValue,
|
|
coDot11ShortGIOptionInTwentyEnabled TruthValue,
|
|
coDot11ShortGIOptionInFortyImplemented TruthValue,
|
|
coDot11ShortGIOptionInFortyEnabled TruthValue,
|
|
coDot11HighestSupportedDataRate Integer32
|
|
}
|
|
|
|
coDot11FortyMHzOperationImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the 40 MHz
|
|
Operation is implemented."
|
|
::= { coDot11PhyHTEntry 1 }
|
|
|
|
coDot11FortyMHzOperationEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the 40 MHz
|
|
Operation is enabled."
|
|
::= { coDot11PhyHTEntry 2 }
|
|
|
|
coDot11CurrentPrimaryChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute indicates the operating channel.
|
|
If 20/40 MHz Mode is currently in use then this
|
|
attribute indicates the primary channel."
|
|
::= { coDot11PhyHTEntry 3 }
|
|
|
|
coDot11CurrentSecondaryChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute indicates the channel number of the
|
|
secondary channel. If 20/40 MHz mode is not currently
|
|
in use, this attribute value shall be 0."
|
|
::= { coDot11PhyHTEntry 4 }
|
|
|
|
coDot11GreenfieldOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the HT
|
|
Greenfield option is implemented."
|
|
::= { coDot11PhyHTEntry 5 }
|
|
|
|
coDot11GreenfieldOptionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the HT
|
|
Greenfield option is enabled."
|
|
::= { coDot11PhyHTEntry 6 }
|
|
|
|
coDot11ShortGIOptionInTwentyImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the Short
|
|
Guard option is implemented for 20 MHz operation."
|
|
::= { coDot11PhyHTEntry 7 }
|
|
|
|
coDot11ShortGIOptionInTwentyEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the Short
|
|
Guard option is enabled for 20 MHz operation."
|
|
::= { coDot11PhyHTEntry 8 }
|
|
|
|
coDot11ShortGIOptionInFortyImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the Short
|
|
Guard option is implemented for 40 MHz operation."
|
|
::= { coDot11PhyHTEntry 9 }
|
|
|
|
coDot11ShortGIOptionInFortyEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute, when TRUE, indicates that the Short
|
|
Guard option is enabled for 40 MHz operation."
|
|
::= { coDot11PhyHTEntry 10 }
|
|
|
|
coDot11HighestSupportedDataRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0..600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This attribute shall specify the Highest Data Rate in
|
|
Mb/s at which the station may receive data."
|
|
::= { coDot11PhyHTEntry 11 }
|
|
|
|
-- *** End of Phy HT Table **************************************************
|
|
|
|
-- *** End of PHY General Configuration attributes ****************************
|
|
|
|
|
|
-- *** RSNA statistics ********************************************************
|
|
coDot11RSNAStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoDot11RSNAStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains statistics for SN. It is not supported
|
|
on the WCB-200."
|
|
::= { colubris802dot11 4 }
|
|
|
|
coDot11RSNAStatsEntry OBJECT-TYPE
|
|
SYNTAX CoDot11RSNAStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the coDot11RSNAStatsTable."
|
|
AUGMENTS { coVirtualAccessPointConfigEntry }
|
|
::= { coDot11RSNAStatsTable 1 }
|
|
|
|
CoDot11RSNAStatsEntry ::= SEQUENCE
|
|
{
|
|
coDot11RSNAStatsVersion Unsigned32,
|
|
coDot11RSNAStatsSelectedPairwiseCipher OCTET STRING,
|
|
coDot11RSNAStatsTKIPICVErrors Counter32,
|
|
coDot11RSNAStatsTKIPLocalMICFailures Counter32,
|
|
coDot11RSNAStatsTKIPRemoteMICFailures Counter32,
|
|
coDot11RSNAStatsTKIPCounterMeasuresInvoked Counter32,
|
|
coDot11RSNAStatsCCMPFormatErrors Counter32,
|
|
coDot11RSNAStatsCCMPReplays Counter32,
|
|
coDot11RSNAStatsCCMPDecryptErrors Counter32,
|
|
coDot11RSNAStatsTKIPReplays Counter32,
|
|
coDot11RSNAStats4WayHandshakeFailures Counter32
|
|
}
|
|
|
|
coDot11RSNAStatsVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The RSNA version which the AP associated with."
|
|
::= { coDot11RSNAStatsEntry 2 }
|
|
|
|
coDot11RSNAStatsSelectedPairwiseCipher OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AKM Suite the AP selected during association.
|
|
The value consists of a three octet OUI followed by a
|
|
one octet type as follows:
|
|
|
|
OUI Value, Cipher, Type
|
|
|
|
XX-XX-XX, 0, Reserved
|
|
|
|
XX-XX-XX, 1, WEP-40
|
|
|
|
XX-XX-XX, 2, TKIP
|
|
|
|
XX-XX-XX, 3, Reserved
|
|
|
|
XX-XX-XX, 4, CCMP
|
|
|
|
XX-XX-XX, 5, WEP-104
|
|
|
|
XX-XX-XX, 6-255, Reserved
|
|
|
|
Vendor, any, Vendor Specific
|
|
|
|
other, any, Reserved"
|
|
::= { coDot11RSNAStatsEntry 3 }
|
|
|
|
coDot11RSNAStatsTKIPICVErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counts the number of TKIP ICV errors encountered when
|
|
decrypting packets for the AP."
|
|
::= { coDot11RSNAStatsEntry 4 }
|
|
|
|
coDot11RSNAStatsTKIPLocalMICFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counts the number of Michael MIC failure encountered when
|
|
checking the integrity of packets received from the AP at
|
|
this entity."
|
|
::= { coDot11RSNAStatsEntry 5 }
|
|
|
|
coDot11RSNAStatsTKIPRemoteMICFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counts the number of Michael MIC failures encountered by
|
|
the remote device and reported back to this entity."
|
|
::= { coDot11RSNAStatsEntry 6 }
|
|
|
|
coDot11RSNAStatsTKIPCounterMeasuresInvoked OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counts the number of times a MIC failure occurred two times
|
|
within 60 seconds and countermeasures were invoked. This
|
|
variable counts this for both local and remote. It
|
|
increments every time countermeasures are invoked."
|
|
::= { coDot11RSNAStatsEntry 7 }
|
|
|
|
coDot11RSNAStatsCCMPFormatErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of MSDUs received with an invalid CCMP format."
|
|
::= { coDot11RSNAStatsEntry 8 }
|
|
|
|
coDot11RSNAStatsCCMPReplays OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of received unicast fragments discarded by the
|
|
replay mechanism."
|
|
::= { coDot11RSNAStatsEntry 9 }
|
|
|
|
coDot11RSNAStatsCCMPDecryptErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of received fragments discarded by the CCMP
|
|
decryption algorithm."
|
|
::= { coDot11RSNAStatsEntry 10 }
|
|
|
|
coDot11RSNAStatsTKIPReplays OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counts the number of TKIP replay errors detected."
|
|
::= { coDot11RSNAStatsEntry 11 }
|
|
|
|
coDot11RSNAStats4WayHandshakeFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counts the number of 4-Way Handshake failures."
|
|
::= { coDot11RSNAStatsEntry 12 }
|
|
|
|
-- *** End of RSNA statistics *************************************************
|
|
|
|
|
|
-- *** Notifications **********************************************************
|
|
coDot11ManagementMIBNotificationPrefix OBJECT IDENTIFIER ::= { colubris802dot11 5 }
|
|
coDot11ManagementMIBNotifications OBJECT IDENTIFIER ::= { coDot11ManagementMIBNotificationPrefix 0 }
|
|
|
|
coDot11SNRLevelNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
ifDescr,
|
|
coVirtualApSSID,
|
|
coDot11CurrentSNRLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The average SNR level for all the stations using
|
|
this virtual ap during the last three intervals
|
|
is low."
|
|
--#SUMMARY "Low SNR of %d for wireless profile %s on interface %s"
|
|
--#ARGUMENTS { 3, 2, 1 }
|
|
--#SEVERITY WARNING
|
|
--#CATEGORY "Colubris Networks Alarms"
|
|
::= { coDot11ManagementMIBNotifications 1 }
|
|
|
|
coDot11AssociationNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
ifDescr,
|
|
coDot11StationName,
|
|
coDot11StationSSID,
|
|
coDot11StationIPAddress,
|
|
coDot11StationMACAddress,
|
|
coDot11SignalLevel,
|
|
coDot11SNR,
|
|
coDot11TransmitRate,
|
|
coDot11NumberOfUsers
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Sent when a new association is made or sent periodically
|
|
using interval specified by
|
|
coDot11AssociationNotificationInterval object."
|
|
--#SUMMARY "Device %s MAC:%s SNR:%d wirelessly associated on interface %s SSID %s."
|
|
--#ARGUMENTS { 2, 5, 7, 1, 3 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#CATEGORY "Colubris Networks Alarms"
|
|
::= { coDot11ManagementMIBNotifications 2 }
|
|
|
|
coDot11UnauthorizedAPNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
ifDescr,
|
|
coDot11ScanSSID,
|
|
coDot11ScanMacAddress,
|
|
coDot11ScanChannel,
|
|
coDot11ScanPHYType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Sent when a new unauthorized AP is detected."
|
|
--#SUMMARY "Unauthorized Device %s MAC:%s detected on interface %s."
|
|
--#ARGUMENTS { 2, 3, 1 }
|
|
--#SEVERITY MAJOR
|
|
--#CATEGORY "Colubris Networks Alarms"
|
|
::= { coDot11ManagementMIBNotifications 3 }
|
|
|
|
-- *** End of Notifications ***************************************************
|
|
|
|
|
|
-- *** Conformance Information ************************************************
|
|
coDot11Conformance OBJECT IDENTIFIER ::= { colubris802dot11 6 }
|
|
coDot11Groups OBJECT IDENTIFIER ::= { coDot11Conformance 1 }
|
|
coDot11Compliances OBJECT IDENTIFIER ::= { coDot11Conformance 2 }
|
|
|
|
-- *** compliance statements **************************************************
|
|
coDot11Compliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION "The compliance statement for SNMPv2 entities that implement
|
|
the IEEE 802.11 MIB."
|
|
MODULE MANDATORY-GROUPS
|
|
{
|
|
coDot11APBaseGroup,
|
|
coDot11MACBaseGroup,
|
|
coDot11CountersGroup,
|
|
coDot11SmtAuthenticationAlgorithmsGroup,
|
|
coDot11PhyConfigComplianceGroup,
|
|
coDot11PhyConfigGroup,
|
|
coDot11APPrivacyGroup,
|
|
coDot11MACStatisticsGroup,
|
|
coDot11PhyAntennaComplianceGroup,
|
|
coDot11PhyRegDomainsSupportGroup,
|
|
coDot11PhyAntennasListGroup,
|
|
coDot11PhyRateGroup,
|
|
coDot11AssociationGroup,
|
|
coDot11AssociationConfigGroup,
|
|
coDot11ScanGroup,
|
|
coDot11ScanConfigGroup,
|
|
coDot11WDSComplianceGroup,
|
|
coDot11NotificationGroup,
|
|
coDot11StationHTGroup
|
|
}
|
|
|
|
GROUP coDot11PhyDSSSComplianceGroup
|
|
DESCRIPTION "Implementation of this group is required when object
|
|
coDot11PHYType has the value of dsss."
|
|
|
|
GROUP coDot11PhyOFDMComplianceGroup
|
|
DESCRIPTION "Implementation of this group is required when object
|
|
coDot11PHYType has the value of ofdm."
|
|
|
|
GROUP coDot11PhyHTComplianceGroup
|
|
DESCRIPTION "Implementation of this group is required when object
|
|
coDot11PHYType has the value of ht."
|
|
|
|
::= { coDot11Compliances 1 }
|
|
|
|
coDot11RSNCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for SNMPv2 entities that implement
|
|
the IEEE 802.11 RSN MIB."
|
|
MODULE MANDATORY-GROUPS
|
|
{
|
|
coDot11RSNBase
|
|
}
|
|
::= { coDot11Compliances 2 }
|
|
|
|
coDot11ComplianceExt MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for SNMPv2 entities that implement
|
|
the IEEE 802.11 MIB."
|
|
MODULE MANDATORY-GROUPS
|
|
{
|
|
coDot11APBaseGroupExt,
|
|
coDot11MACBaseGroup,
|
|
coDot11CountersGroup,
|
|
coDot11SmtAuthenticationAlgorithmsGroup,
|
|
coDot11PhyConfigComplianceGroup,
|
|
coDot11PhyConfigGroup,
|
|
coDot11APPrivacyGroup,
|
|
coDot11MACStatisticsGroup,
|
|
coDot11PhyAntennaComplianceGroup,
|
|
coDot11PhyRegDomainsSupportGroup,
|
|
coDot11PhyAntennasListGroup,
|
|
coDot11PhyRateGroup,
|
|
coDot11AssociationGroup,
|
|
coDot11AssociationConfigGroup,
|
|
coDot11ScanGroup,
|
|
coDot11ScanConfigGroup,
|
|
coDot11WDSComplianceGroup,
|
|
coDot11NotificationGroup,
|
|
coDot11StationHTGroup
|
|
}
|
|
|
|
GROUP coDot11PhyDSSSComplianceGroup
|
|
DESCRIPTION "Implementation of this group is required when object
|
|
coDot11PHYType has the value of dsss."
|
|
|
|
GROUP coDot11PhyOFDMComplianceGroup
|
|
DESCRIPTION "Implementation of this group is required when object
|
|
coDot11PHYType has the value of ofdm."
|
|
|
|
GROUP coDot11PhyHTComplianceGroup
|
|
DESCRIPTION "Implementation of this group is required when object
|
|
coDot11PHYType has the value of ht."
|
|
|
|
::= { coDot11Compliances 3 }
|
|
|
|
-- *** Groups - units of conformance ******************************************
|
|
coDot11APBaseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11RelayBetweenStation,
|
|
coDot11PrivacyOptionImplemented,
|
|
coDot11RSNAOptionImplemented,
|
|
coDot11BeaconPeriod,
|
|
coDot11DTIMPeriod,
|
|
coDot11NumberOfUsers,
|
|
coDot11AddToAssociationNotification,
|
|
coDot11PhyTxPowerAdminLevel,
|
|
coDot11PhyTxPowerOperLevel,
|
|
coDot11BSSID,
|
|
coDot11AdminMinimumDataRate,
|
|
coDot11AdminMaximumDataRate,
|
|
coDot11HighThroughputOptionImplemented
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the processes in the STA such that
|
|
the STA may work cooperatively as a part of an IEEE 802.11
|
|
network. coDot11AdminMinimumDataRate and
|
|
coDot11AdminMaximumDataRate are deprecated."
|
|
::= { coDot11Groups 1 }
|
|
|
|
coDot11APPrivacyGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11PrivacyInvoked,
|
|
coDot11ExcludeUnencrypted,
|
|
coDot11WEPICVErrorCount,
|
|
coDot11WEPExcludedCount,
|
|
coDot11WEPDefaultKeyID,
|
|
coDot11WEPDefaultKey1Value,
|
|
coDot11WEPDefaultKey2Value,
|
|
coDot11WEPDefaultKey3Value,
|
|
coDot11WEPDefaultKey4Value,
|
|
coDot11RSNAEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The APPrivacy package is a set of attributes that shall be
|
|
present if WEP is implemented in the Access Point."
|
|
::= { coDot11Groups 2 }
|
|
|
|
coDot11MACBaseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11MACAddress,
|
|
coDot11RTSThreshold,
|
|
coDot11ShortRetryLimit,
|
|
coDot11LongRetryLimit,
|
|
coDot11FragmentationThreshold,
|
|
coDot11MaxTransmitMSDULifetime,
|
|
coDot11MaxReceiveLifetime,
|
|
coDot11ManufacturerID,
|
|
coDot11ProductID,
|
|
coDot11RadioType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The MAC object class provides the necessary support for the
|
|
access control, generation, and verification of frame check
|
|
sequences, and proper delivery of valid data to upper layers."
|
|
::= { coDot11Groups 3 }
|
|
|
|
coDot11MACStatisticsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11RetryCount,
|
|
coDot11MultipleRetryCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The MACStatistics package provides extended statistical
|
|
information on the operation of the MAC. This package is
|
|
completely optional."
|
|
::= { coDot11Groups 4 }
|
|
|
|
coDot11SmtAuthenticationAlgorithmsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11AuthenticationAlgorithm,
|
|
coDot11AuthenticationAlgorithmsEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Authentication Algorithm Table."
|
|
::= { coDot11Groups 5 }
|
|
|
|
coDot11PhyConfigComplianceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11MinimumSNRLevel,
|
|
coDot11CurrentSNRLevel,
|
|
coDot11Sensitivity,
|
|
coDot11PhyAdminStatus,
|
|
coDot11PhyOperStatus,
|
|
coDot11PHYType,
|
|
coDot11CurrentRegDomain,
|
|
coDot11TempType,
|
|
coDot11CurrentOperFrequency,
|
|
coDot11CurrentOperPHYType,
|
|
coDot11RadioEnabled,
|
|
coDot11OperatingMode,
|
|
coDot11AutoChannelEnabled,
|
|
coDot11AutoChannelInterval,
|
|
coDot11AutoPowerEnabled,
|
|
coDot11AutoPowerInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "PHY layer operations attributes."
|
|
::= { coDot11Groups 6 }
|
|
|
|
coDot11PhyConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11SNRLevelNotificationEnabled,
|
|
coDot11SNRLevelNotificationInterval,
|
|
coDot11CountryCode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "PHY notification configuration attributes."
|
|
::= { coDot11Groups 7 }
|
|
|
|
coDot11PhyAntennaComplianceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11CurrentTxAntenna,
|
|
coDot11DiversitySupport,
|
|
coDot11CurrentRxAntenna
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Phy antenna attributes."
|
|
::= { coDot11Groups 8 }
|
|
|
|
coDot11PhyDSSSComplianceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11CurrentChannel,
|
|
coDot11CCAModeSupported,
|
|
coDot11CurrentCCAMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes that configure the DSSS for IEEE 802.11."
|
|
::= { coDot11Groups 9 }
|
|
|
|
coDot11PhyRegDomainsSupportGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11RegDomainsSupportValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes that specify the supported Regulation Domains."
|
|
::= { coDot11Groups 10 }
|
|
|
|
coDot11PhyAntennasListGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11SupportedTxAntenna,
|
|
coDot11SupportedRxAntenna,
|
|
coDot11DiversitySelectionRx
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Antennas list attributes."
|
|
::= { coDot11Groups 11 }
|
|
|
|
coDot11PhyRateGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11SupportedDataRatesTxValue,
|
|
coDot11SupportedDataRatesRxValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes for Data Rates for IEEE 802.11."
|
|
::= { coDot11Groups 12 }
|
|
|
|
coDot11CountersGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11TransmittedFragmentCount,
|
|
coDot11MulticastTransmittedFrameCount,
|
|
coDot11FailedCount,
|
|
coDot11FrameDuplicateCount,
|
|
coDot11RTSSuccessCount,
|
|
coDot11RTSFailureCount,
|
|
coDot11ACKFailureCount,
|
|
coDot11ReceivedFragmentCount,
|
|
coDot11MulticastReceivedFrameCount,
|
|
coDot11FCSErrorCount,
|
|
coDot11WEPUndecryptableCount,
|
|
coDot11TransmittedFrameCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes from the coDot11CountersGroup that are not described
|
|
in the coDot11MACStatistics group. These objects are
|
|
mandatory."
|
|
::= { coDot11Groups 13 }
|
|
|
|
coDot11AssociationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11StationMACAddress,
|
|
coDot11StationConnectTime,
|
|
coDot11SignalLevel,
|
|
coDot11NoiseLevel,
|
|
coDot11SNR,
|
|
coDot11PktsRate1,
|
|
coDot11PktsRate2,
|
|
coDot11PktsRate5dot5,
|
|
coDot11PktsRate6,
|
|
coDot11PktsRate9,
|
|
coDot11PktsRate11,
|
|
coDot11PktsRate12,
|
|
coDot11PktsRate18,
|
|
coDot11PktsRate24,
|
|
coDot11PktsRate36,
|
|
coDot11PktsRate48,
|
|
coDot11PktsRate54,
|
|
coDot11TransmitRate,
|
|
coDot11ReceiveRate,
|
|
coDot11InPkts,
|
|
coDot11OutPkts,
|
|
coDot11InOctets,
|
|
coDot11OutOctets,
|
|
coDot11StationSSID,
|
|
coDot11StationName,
|
|
coDot11StationIPAddress,
|
|
coDot11StationVLAN,
|
|
coDot11StationLocalInterface,
|
|
coDot11StaHT
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the association table."
|
|
::= { coDot11Groups 14 }
|
|
|
|
coDot11AssociationConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11AssociationNotificationEnabled,
|
|
coDot11AssociationNotificationInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the association table. Not supported
|
|
on the WCB-200."
|
|
::= { coDot11Groups 15 }
|
|
|
|
coDot11ScanGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11ScanMacAddress,
|
|
coDot11ScanChannel,
|
|
coDot11ScanSSID,
|
|
coDot11ScanSignalLevel,
|
|
coDot11ScanNoiseLevel,
|
|
coDot11ScanSNR,
|
|
coDot11ScanStatus,
|
|
coDot11ScanPHYType,
|
|
coDot11ScanInactivityTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the scan table. "
|
|
::= { coDot11Groups 16 }
|
|
|
|
coDot11ScanConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11ScanEnabled,
|
|
coDot11ScanPeriodicity,
|
|
coDot11ScanAuthorizedListURL,
|
|
coDot11UnauthorizedAPNotificationEnabled,
|
|
coDot11UnauthorizedAPNotificationInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the scan table. Not supported on
|
|
the WCB-200."
|
|
::= { coDot11Groups 17 }
|
|
|
|
coDot11WDSComplianceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11WDSPortMacAddress,
|
|
coDot11WDSPortCurrentRate,
|
|
coDot11WDSPortSNRLevel,
|
|
coDot11WDSPortTxPackets,
|
|
coDot11WDSPortTxDropped,
|
|
coDot11WDSPortTxErrors,
|
|
coDot11WDSPortRxPackets,
|
|
coDot11WDSPortRxDropped,
|
|
coDot11WDSPortRxErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes that configure the WDS table."
|
|
::= { coDot11Groups 18 }
|
|
|
|
coDot11NotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
coDot11SNRLevelNotification,
|
|
coDot11AssociationNotification,
|
|
coDot11UnauthorizedAPNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of supported notifications."
|
|
::= { coDot11Groups 19 }
|
|
|
|
coDot11RSNBase OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11RSNAStatsVersion,
|
|
coDot11RSNAStatsSelectedPairwiseCipher,
|
|
coDot11RSNAStatsTKIPICVErrors,
|
|
coDot11RSNAStatsTKIPLocalMICFailures,
|
|
coDot11RSNAStatsTKIPRemoteMICFailures,
|
|
coDot11RSNAStatsTKIPCounterMeasuresInvoked,
|
|
coDot11RSNAStatsCCMPFormatErrors,
|
|
coDot11RSNAStatsCCMPReplays,
|
|
coDot11RSNAStatsCCMPDecryptErrors,
|
|
coDot11RSNAStatsTKIPReplays,
|
|
coDot11RSNAStats4WayHandshakeFailures
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The coDot11RSNBase object class provides the necessary
|
|
support for managing RSNA functionality in the STA"
|
|
::= { coDot11Groups 20 }
|
|
|
|
coDot11PhyOFDMComplianceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11CurrentFrequency,
|
|
coDot11TIThreshold,
|
|
coDot11FrequencyBandsSupported
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes that configure the OFDM for IEEE 802.11."
|
|
::= { coDot11Groups 21 }
|
|
|
|
coDot11StationHTGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11StaTransmitMCS,
|
|
coDot11StaReceiveMCS,
|
|
coDot11StaChannelWidth,
|
|
coDot11StaShortGI,
|
|
coDot11StaPktsTxMCS0,
|
|
coDot11StaPktsTxMCS1,
|
|
coDot11StaPktsTxMCS2,
|
|
coDot11StaPktsTxMCS3,
|
|
coDot11StaPktsTxMCS4,
|
|
coDot11StaPktsTxMCS5,
|
|
coDot11StaPktsTxMCS6,
|
|
coDot11StaPktsTxMCS7,
|
|
coDot11StaPktsTxMCS8,
|
|
coDot11StaPktsTxMCS9,
|
|
coDot11StaPktsTxMCS10,
|
|
coDot11StaPktsTxMCS11,
|
|
coDot11StaPktsTxMCS12,
|
|
coDot11StaPktsTxMCS13,
|
|
coDot11StaPktsTxMCS14,
|
|
coDot11StaPktsTxMCS15,
|
|
coDot11StaPktsRxMCS0,
|
|
coDot11StaPktsRxMCS1,
|
|
coDot11StaPktsRxMCS2,
|
|
coDot11StaPktsRxMCS3,
|
|
coDot11StaPktsRxMCS4,
|
|
coDot11StaPktsRxMCS5,
|
|
coDot11StaPktsRxMCS6,
|
|
coDot11StaPktsRxMCS7,
|
|
coDot11StaPktsRxMCS8,
|
|
coDot11StaPktsRxMCS9,
|
|
coDot11StaPktsRxMCS10,
|
|
coDot11StaPktsRxMCS11,
|
|
coDot11StaPktsRxMCS12,
|
|
coDot11StaPktsRxMCS13,
|
|
coDot11StaPktsRxMCS14,
|
|
coDot11StaPktsRxMCS15
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the station HT table."
|
|
::= { coDot11Groups 22 }
|
|
|
|
coDot11PhyHTComplianceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11FortyMHzOperationImplemented,
|
|
coDot11FortyMHzOperationEnabled,
|
|
coDot11CurrentPrimaryChannel,
|
|
coDot11CurrentSecondaryChannel,
|
|
coDot11GreenfieldOptionImplemented,
|
|
coDot11GreenfieldOptionEnabled,
|
|
coDot11ShortGIOptionInTwentyImplemented,
|
|
coDot11ShortGIOptionInTwentyEnabled,
|
|
coDot11ShortGIOptionInFortyImplemented,
|
|
coDot11ShortGIOptionInFortyEnabled,
|
|
coDot11HighestSupportedDataRate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Attributes that configure the HT for IEEE 802.11."
|
|
::= { coDot11Groups 23 }
|
|
|
|
coDot11APBaseGroupExt OBJECT-GROUP
|
|
OBJECTS {
|
|
coDot11RelayBetweenStation,
|
|
coDot11PrivacyOptionImplemented,
|
|
coDot11RSNAOptionImplemented,
|
|
coDot11BeaconPeriod,
|
|
coDot11DTIMPeriod,
|
|
coDot11NumberOfUsers,
|
|
coDot11AddToAssociationNotification,
|
|
coDot11PhyTxPowerAdminLevel,
|
|
coDot11PhyTxPowerOperLevel,
|
|
coDot11BSSID,
|
|
coDot11HighThroughputOptionImplemented
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The AP object class provides the necessary support at the
|
|
Access Point to manage the processes in the STA such that
|
|
the STA may work cooperatively as a part of an IEEE 802.11
|
|
network."
|
|
::= { coDot11Groups 24 }
|
|
|
|
END
|