1036 lines
37 KiB
Plaintext
1036 lines
37 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (C) 2004 by HUAWEI TECHNOLOGIES. All rights reserved
|
|
--
|
|
-- Description: The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS
|
|
--
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History:
|
|
--
|
|
-- =================================================================
|
|
|
|
HUAWEI-DC-TRAP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
entPhysicalName
|
|
FROM ENTITY-MIB
|
|
hwDatacomm
|
|
FROM HUAWEI-MIB
|
|
ifIndex, ifDescr
|
|
FROM RFC1213-MIB
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI;
|
|
|
|
|
|
hwDCTrapMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200604240000Z" -- April 24, 2006 at 00:00 GMT
|
|
ORGANIZATION
|
|
"Huawei Technologies co.,Ltd."
|
|
CONTACT-INFO
|
|
" R&D BeiJing, Huawei Technologies co.,Ltd.
|
|
Huawei Bld.,NO.3 Xinxi Rd.,
|
|
Shang-Di Information Industry Base,
|
|
Hai-Dian District Beijing P.R. China
|
|
Zip:100085
|
|
Http://www.huawei.com
|
|
E-mail:support@huawei.com "
|
|
DESCRIPTION
|
|
"
|
|
The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS.
|
|
"
|
|
::= { hwDatacomm 37 }
|
|
|
|
|
|
|
|
|
|
|
|
hwDCTrapControl OBJECT IDENTIFIER ::= { hwDCTrapMIB 1 }
|
|
|
|
hwDCCtrlTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string serving as a bit map for the trap
|
|
events defined by the hwDatacomm traps. This
|
|
object is used to enable and disable specific
|
|
hwDatacomm traps where a 1 in the bit field
|
|
represents enabled. The right-most bit (least
|
|
significant) represents trap 0."
|
|
::= { hwDCTrapControl 1 }
|
|
|
|
hwTunnelGroupID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2047)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel id"
|
|
::= { hwDCTrapControl 2 }
|
|
|
|
hwDCTrapReason OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
" For the BTB system to report Trap Reason."
|
|
::= { hwDCTrapControl 3 }
|
|
|
|
hwDCTraps OBJECT IDENTIFIER ::= { hwDCTrapMIB 2 }
|
|
|
|
-- Traps
|
|
hwMPUSynClkFaulty NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MPU sync clock signal faulty!"
|
|
::= { hwDCTraps 1 }
|
|
|
|
hwMPUSynClkFaultyResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MPU sync clock signal faulty resume!"
|
|
::= { hwDCTraps 2 }
|
|
|
|
hwSlaveMPUNoResp NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slave MPU has no response!"
|
|
::= { hwDCTraps 3 }
|
|
|
|
hwSlaveMPUNoRespResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slave MPU has no response resume!"
|
|
::= { hwDCTraps 4 }
|
|
|
|
hwBrdChannelFaulty NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board channel faulty!"
|
|
::= { hwDCTraps 5 }
|
|
|
|
hwBrdChannelFaultyResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board channel faulty resume!"
|
|
::= { hwDCTraps 6 }
|
|
|
|
hwBrdNofullin NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board not full in!"
|
|
::= { hwDCTraps 7 }
|
|
|
|
hwBrdNofullinResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board not full in resume!"
|
|
::= { hwDCTraps 8 }
|
|
|
|
hwBrdTypeNoMatchReset NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board is reset because of the chip type is not matching!"
|
|
::= { hwDCTraps 9 }
|
|
|
|
hwBrdAutoSwtFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board automatically switch syn-clock but it locked failed!"
|
|
::= { hwDCTraps 10 }
|
|
|
|
hwBrdAutoSwt NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board automatically switch syn-clock!"
|
|
::= { hwDCTraps 11 }
|
|
|
|
hwBrdClkLockERR NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board fabric clock is unlocked!"
|
|
::= { hwDCTraps 12 }
|
|
|
|
hwBrdClkLockERRResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board fabric clock unlock to current clock resume!"
|
|
::= { hwDCTraps 13 }
|
|
|
|
hwBrdRemoved NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board pulled out!"
|
|
::= { hwDCTraps 14 }
|
|
|
|
hwBrdInserted NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board plugged in!"
|
|
::= { hwDCTraps 15 }
|
|
|
|
hwBrdUp NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board register!"
|
|
::= { hwDCTraps 16 }
|
|
|
|
hwClkSrcMiss NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK source Loss Of Signal!"
|
|
::= { hwDCTraps 17 }
|
|
|
|
hwClkAllSrcLost NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK all source lost!"
|
|
::= { hwDCTraps 18 }
|
|
|
|
hwClkAllSrcLostResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK all source lost resume!"
|
|
::= { hwDCTraps 19 }
|
|
|
|
hwClkFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK hardware failed!"
|
|
::= { hwDCTraps 20 }
|
|
|
|
hwClkFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK hardware failed resume!"
|
|
::= { hwDCTraps 21 }
|
|
|
|
hwClkNoHeartbeat NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK No Heartbeat!"
|
|
::= { hwDCTraps 22 }
|
|
|
|
hwClkNoHeartbeatResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLK No Heartbeat resume!"
|
|
::= { hwDCTraps 23 }
|
|
|
|
hwLPULostSynAlarm NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LPU SERDES interface is lost synchronization!"
|
|
::= { hwDCTraps 24 }
|
|
|
|
hwLPUOpenChannelError NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LPU SERDES interface open error!"
|
|
::= { hwDCTraps 25 }
|
|
|
|
hwLPUSlfTstErr NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LPU self test error!"
|
|
::= { hwDCTraps 26 }
|
|
|
|
hwLPU3ClkSwitch NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LPU 3 class clock is switch!"
|
|
::= { hwDCTraps 27 }
|
|
|
|
hwSFULostHrtReset NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SFU is reset because of heart beat loss!"
|
|
::= { hwDCTraps 28 }
|
|
|
|
hwSFULinkLostReset NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SFU is reset because of SERDES interface input channel link lost numbers over threshold!"
|
|
::= { hwDCTraps 29 }
|
|
|
|
hwSFUChannelLinkLost NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SFU check SERDES interface input channel link lost!"
|
|
::= { hwDCTraps 30 }
|
|
|
|
hwSFUInChannelOpenFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SFU SERDES interface input channel is opened failed!"
|
|
::= { hwDCTraps 31 }
|
|
|
|
hwVoltSensorFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage monitor failure!"
|
|
::= { hwDCTraps 32 }
|
|
|
|
hwVoltSensorFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage monitor failure resume!"
|
|
::= { hwDCTraps 33 }
|
|
|
|
hwVoltBtmC NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage below fatal threshold!"
|
|
::= { hwDCTraps 34 }
|
|
|
|
hwVoltBtmCResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage below fatal threshold resume!"
|
|
::= { hwDCTraps 35 }
|
|
|
|
hwVoltSprC NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage over fatal threshold!"
|
|
::= { hwDCTraps 36 }
|
|
|
|
hwVoltSprCResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage over fatal threshold resume!"
|
|
::= { hwDCTraps 37 }
|
|
|
|
hwVoltBtmM NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage below major threshold!"
|
|
::= { hwDCTraps 38 }
|
|
|
|
hwVoltBtmMResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage below major threshold resume!"
|
|
::= { hwDCTraps 39 }
|
|
|
|
hwVoltSprM NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage over major threshold!"
|
|
::= { hwDCTraps 40 }
|
|
|
|
hwVoltSprMResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board voltage over major threshold resume!"
|
|
::= { hwDCTraps 41 }
|
|
|
|
hwTempSensorFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temprature monitor failure!"
|
|
::= { hwDCTraps 42 }
|
|
|
|
hwTempSensorFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature monitor failure resume!"
|
|
::= { hwDCTraps 43 }
|
|
|
|
hwTempMnr NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature over minor threshold!"
|
|
::= { hwDCTraps 44 }
|
|
|
|
hwTempMnrResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature over minor threshold resume!"
|
|
::= { hwDCTraps 45 }
|
|
|
|
hwTempMjr NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature over major threshold!"
|
|
::= { hwDCTraps 46 }
|
|
|
|
hwTempMjrResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature over major threshold resume!"
|
|
::= { hwDCTraps 47 }
|
|
|
|
hwTempCtl NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature over fatal threshold!"
|
|
::= { hwDCTraps 48 }
|
|
|
|
hwTempCtlResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temperature over fatal threshold resume!"
|
|
::= { hwDCTraps 49 }
|
|
|
|
hwFanHFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan hardware failure!"
|
|
::= { hwDCTraps 50 }
|
|
|
|
hwFanFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan failure!"
|
|
::= { hwDCTraps 51 }
|
|
|
|
hwFanFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan failure resume!"
|
|
::= { hwDCTraps 52 }
|
|
|
|
hwFanAbsent NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan absent!"
|
|
::= { hwDCTraps 53 }
|
|
|
|
hwFanAbsentResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan absent resume!"
|
|
::= { hwDCTraps 54 }
|
|
|
|
hwFanCabUN NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan cable unplugged!"
|
|
::= { hwDCTraps 55 }
|
|
|
|
hwFanCabUNResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan cable unplugged resume!"
|
|
::= { hwDCTraps 56 }
|
|
|
|
hwPwrFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power failure!"
|
|
::= { hwDCTraps 57 }
|
|
|
|
hwPwrFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power failure resume!"
|
|
::= { hwDCTraps 58 }
|
|
|
|
hwPwrAbsent NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power absent!"
|
|
::= { hwDCTraps 59 }
|
|
|
|
hwPwrAbsentResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power absent resume!"
|
|
::= { hwDCTraps 60 }
|
|
|
|
hwPwrCabUN NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power monitor cable unplugged!"
|
|
::= { hwDCTraps 61 }
|
|
|
|
hwPwrCabUNResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power monitor cable unplugged resume!"
|
|
::= { hwDCTraps 62 }
|
|
|
|
hwLCDHFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCD hardware failure!"
|
|
::= { hwDCTraps 63 }
|
|
|
|
hwLCDFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCD failure!"
|
|
::= { hwDCTraps 64 }
|
|
|
|
hwLCDAbsent NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCD absent!"
|
|
::= { hwDCTraps 65 }
|
|
|
|
hwLCDAbsentResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCD absent resume!"
|
|
::= { hwDCTraps 66 }
|
|
|
|
hwLCDCabUN NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCD cable unplugged!"
|
|
::= { hwDCTraps 67 }
|
|
|
|
hwLCDCabUNResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCD cable unplugged resume!"
|
|
::= { hwDCTraps 68 }
|
|
|
|
hwROMFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EEPROM failure!"
|
|
::= { hwDCTraps 69 }
|
|
|
|
hwMonitorBUSFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MonitorBUS failure!"
|
|
::= { hwDCTraps 70 }
|
|
|
|
hwMonitorBUSFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MonitorBUS failure resume!"
|
|
::= { hwDCTraps 71 }
|
|
|
|
hwBoardOfflineChange NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board power status change!"
|
|
::= { hwDCTraps 72 }
|
|
|
|
hwWriteFlashError NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"write flash error!"
|
|
::= { hwDCTraps 100 }
|
|
|
|
hwBoardReset NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"board reset!"
|
|
::= { hwDCTraps 101 }
|
|
|
|
hwBoardResetSuccess NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"board reset success!"
|
|
::= { hwDCTraps 102 }
|
|
|
|
hwSlaveMPUReset NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"slave MPU reset !"
|
|
::= { hwDCTraps 103 }
|
|
|
|
hwMasterSlaveSwap NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"master slave swap!"
|
|
::= { hwDCTraps 104 }
|
|
|
|
hwRTCFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RTC failure!"
|
|
::= { hwDCTraps 105 }
|
|
|
|
hwExchangeChipFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"5695 exchange chip fail!"
|
|
::= { hwDCTraps 106 }
|
|
|
|
hwTempResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board temprature over threshold resume!"
|
|
::= { hwDCTraps 107 }
|
|
|
|
hwOpticalModuleInsert NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"optical module plug in !"
|
|
::= { hwDCTraps 108 }
|
|
|
|
hwOpticalModuleRemove NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"optical module plug out !"
|
|
::= { hwDCTraps 109 }
|
|
|
|
hwFPGAAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FPGA abnormal !"
|
|
::= { hwDCTraps 110 }
|
|
|
|
hwMinMTunnelDownAlarm NOTIFICATION-TYPE
|
|
OBJECTS { hwTunnelGroupID }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
For Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package
|
|
can't arrive to the other side of mac in mac tunnel, the status of tunnel will be down
|
|
1 Notice/Trap name: Tunnel down
|
|
2 Notice/Trap generation cause: when All mac tunnel have been down in the mac tunnel group
|
|
3 Repair suggestions:
|
|
make one of the mac tunnel up in the mac tunnel group
|
|
"
|
|
::= { hwDCTraps 111 }
|
|
|
|
hwMinMTunnelUpAlarm NOTIFICATION-TYPE
|
|
OBJECTS { hwTunnelGroupID }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
For Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac
|
|
in mac tunnel, the status of tunnel will be up
|
|
1 Notice/Trap name: Tunnel up
|
|
2 Notice/Trap generation cause: one of the tunnel is up in the mac tunnel group
|
|
3 Repair suggestion:
|
|
"
|
|
::= { hwDCTraps 112 }
|
|
|
|
hwInterfacePhysicalDown NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, ifDescr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is to indicate port link down on physical layer."
|
|
::= { hwDCTraps 113 }
|
|
|
|
hwInterfacePhysicalUp NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, ifDescr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is to indicate port link up on physical layer."
|
|
::= { hwDCTraps 114 }
|
|
|
|
hwBTBStartupFileNameDifferent NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In the BTB system ,the start-up file name of master and slave chassis is different .
|
|
Used for BTB or its extend system."
|
|
::= { hwDCTraps 119 }
|
|
|
|
hwBTBChassisRunningModeConflict NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Master and Slave chassises running modes conflict.Used for BTB or its extend system."
|
|
::= { hwDCTraps 120 }
|
|
|
|
hwBTBCtrlChannelFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FE control channel failture, as physical link from up to down or channel blocked.
|
|
Used for BTB or its extend system."
|
|
::= { hwDCTraps 121 }
|
|
|
|
hwBTBCtrlChannelFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FE control channel failture resume.Used for BTB or its extend system."
|
|
::= { hwDCTraps 122 }
|
|
|
|
hwBTBDataChannelFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data channel failture, all optical links down between chassises.Used for BTB or its extend system."
|
|
::= { hwDCTraps 123 }
|
|
|
|
hwBTBDataChannelFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data channel failture resume.Used for BTB or its extend system."
|
|
::= { hwDCTraps 124 }
|
|
|
|
hwBTBClkChannelFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock channel failture, clock link down between chassises.Used for BTB or its extend system."
|
|
::= { hwDCTraps 125 }
|
|
|
|
hwBTBClkChannelFailResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock Channel failture resume.Used for BTB or its extend system."
|
|
::= { hwDCTraps 126 }
|
|
|
|
hwBTBSFUOpticInterfaceError NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical fiber connection error, the connection of SFU fiber between chassises is not correct.
|
|
Used for BTB or its extend system."
|
|
::= { hwDCTraps 127 }
|
|
|
|
hwBTBSFUOpticInterfaceErrorResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical fiber connection error resume.Used for BTB or its extend system."
|
|
::= { hwDCTraps 128 }
|
|
|
|
hwBTBVSRInterfaceInvalid NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SFU VSR(very short reach) interface invalid.Used for BTB or its extend system."
|
|
::= { hwDCTraps 129 }
|
|
|
|
hwBTBVSRInterfaceInvalidResume NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SFU VSR(very short reach) interface invalid resume.Used for BTB or its extend system."
|
|
::= { hwDCTraps 130 }
|
|
|
|
hwBTBSlaveChassisNoHeart NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slave chassis no heart.Used for BTB or its extend system."
|
|
::= { hwDCTraps 131 }
|
|
|
|
hwBTBNoSlaveChassis NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No slave chassis connected to the master chassis in the BTB system.Used for BTB or its extend system."
|
|
::= { hwDCTraps 132 }
|
|
|
|
hwBTBSlaveChassisRegisted NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slave chassis registe successful.Used for BTB or its extend system."
|
|
::= { hwDCTraps 133 }
|
|
|
|
hwBTBSlaveChassisRegisteFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slave chassis registe failed.Used for BTB or its extend system."
|
|
::= { hwDCTraps 134 }
|
|
|
|
hwBTBChassisTypeConflict NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The chassis information conflict in the PAF and Nvram.Used for BTB or its extend system."
|
|
::= { hwDCTraps 135 }
|
|
|
|
hwSuperChangeSuccesful NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Super change successful."
|
|
::= { hwDCTraps 136 }
|
|
|
|
hwSuperChangeFailure NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Super change Failure."
|
|
::= { hwDCTraps 137 }
|
|
|
|
hwOpticaPowerAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Optical Transceiver power abnormal."
|
|
::= { hwDCTraps 138 }
|
|
|
|
hwEpldAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Epld logic abnormal."
|
|
::= { hwDCTraps 139 }
|
|
|
|
hwPhyChipAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PHY chip is abnormal."
|
|
::= { hwDCTraps 140 }
|
|
|
|
hwSerdesAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serdes interface of PHY chip abnormal."
|
|
::= { hwDCTraps 141 }
|
|
|
|
hwBoardAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Board is abnormal."
|
|
::= { hwDCTraps 142 }
|
|
|
|
hwFeChannelAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FE data channel is abnormal"
|
|
::= { hwDCTraps 143 }
|
|
|
|
hwParityCheckAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data parity check is abnormal"
|
|
::= { hwDCTraps 144 }
|
|
|
|
hwPhyClockAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock of PHY chip is abnormal."
|
|
::= { hwDCTraps 145 }
|
|
|
|
hwPortAutoNegotiateFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet port negotiate failed"
|
|
::= { hwDCTraps 146 }
|
|
|
|
hwPortSemiduplex NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet port work at semi duplex state."
|
|
::= { hwDCTraps 147 }
|
|
|
|
hwScuStartModeSetFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start mode of SCU set failed"
|
|
::= { hwDCTraps 148 }
|
|
|
|
hwMemoryExhaust NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MPU memory exhaust."
|
|
::= { hwDCTraps 149 }
|
|
|
|
hwMemoryExhaustClear NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MPU memory usage resume to normal."
|
|
::= { hwDCTraps 150 }
|
|
|
|
hwMethAbnormal NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Meth interface is abnormal."
|
|
::= { hwDCTraps 151 }
|
|
|
|
hwLpuNotTight NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LPU board is not tightly installed. Install the board again."
|
|
::= { hwDCTraps 152 }
|
|
|
|
hwLicenseFail NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"License fail."
|
|
::= { hwDCTraps 153 }
|
|
|
|
hwHaBatchBegin NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No command line can be entered because batch backup is processing."
|
|
::= { hwDCTraps 154 }
|
|
|
|
hwHaBatchEnd NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Command lines can be entered because batch backup ends."
|
|
::= { hwDCTraps 155 }
|
|
|
|
hwHaSmoothBegin NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No command line can be entered because data smooth is processing."
|
|
::= { hwDCTraps 156 }
|
|
|
|
hwHaSmoothEnd NOTIFICATION-TYPE
|
|
OBJECTS { entPhysicalName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Command lines can be entered because data smooth ends."
|
|
::= { hwDCTraps 157 }
|
|
hwDCTrapConformance OBJECT IDENTIFIER ::= { hwDCTrapMIB 3 }
|
|
|
|
-- conformance information
|
|
hwDCTrapGroups OBJECT IDENTIFIER ::= { hwDCTrapConformance 1 }
|
|
|
|
-- units of conformance
|
|
hwDCTrapControlGroup OBJECT-GROUP
|
|
OBJECTS { hwDCCtrlTrap, hwTunnelGroupID, hwDCTrapReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required to control traps
|
|
from hwDatacomm Traps systems."
|
|
::= { hwDCTrapGroups 1 }
|
|
|
|
hwDCNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwMPUSynClkFaulty, hwMPUSynClkFaultyResume, hwSlaveMPUNoResp, hwSlaveMPUNoRespResume, hwBrdChannelFaulty,
|
|
hwBrdChannelFaultyResume, hwBrdNofullin, hwBrdNofullinResume, hwBrdTypeNoMatchReset, hwBrdAutoSwtFail,
|
|
hwBrdAutoSwt, hwBrdClkLockERR, hwBrdClkLockERRResume, hwBrdRemoved, hwBrdUp,
|
|
hwClkSrcMiss, hwClkAllSrcLost, hwClkAllSrcLostResume, hwClkFail, hwClkFailResume,
|
|
hwClkNoHeartbeat, hwClkNoHeartbeatResume, hwLPULostSynAlarm, hwLPUOpenChannelError, hwLPUSlfTstErr,
|
|
hwLPU3ClkSwitch, hwSFULostHrtReset, hwSFULinkLostReset, hwSFUChannelLinkLost, hwSFUInChannelOpenFail,
|
|
hwVoltSensorFail, hwVoltSensorFailResume, hwVoltBtmC, hwVoltBtmCResume, hwVoltSprC,
|
|
hwVoltSprCResume, hwVoltBtmM, hwVoltBtmMResume, hwVoltSprM, hwVoltSprMResume,
|
|
hwTempSensorFail, hwTempSensorFailResume, hwTempMnr, hwTempMnrResume, hwTempMjr,
|
|
hwTempMjrResume, hwTempCtl, hwTempCtlResume, hwFanHFail, hwFanFail,
|
|
hwFanFailResume, hwFanAbsent, hwFanAbsentResume, hwFanCabUN, hwFanCabUNResume,
|
|
hwPwrFail, hwPwrFailResume, hwPwrAbsent, hwPwrAbsentResume, hwPwrCabUN,
|
|
hwPwrCabUNResume, hwLCDHFail, hwLCDFail, hwLCDAbsent, hwLCDAbsentResume,
|
|
hwLCDCabUN, hwLCDCabUNResume, hwROMFail, hwMonitorBUSFail, hwMonitorBUSFailResume,
|
|
hwWriteFlashError, hwBoardReset, hwBoardResetSuccess, hwSlaveMPUReset, hwMasterSlaveSwap,
|
|
hwRTCFail, hwExchangeChipFail, hwTempResume, hwOpticalModuleInsert, hwOpticalModuleRemove,
|
|
hwBoardOfflineChange, hwInterfacePhysicalDown, hwInterfacePhysicalUp, hwBTBStartupFileNameDifferent, hwBTBChassisRunningModeConflict,
|
|
hwBTBCtrlChannelFail, hwBTBCtrlChannelFailResume, hwBTBDataChannelFail, hwBTBDataChannelFailResume, hwBTBClkChannelFail,
|
|
hwBTBClkChannelFailResume, hwBTBSFUOpticInterfaceError, hwBTBSFUOpticInterfaceErrorResume, hwBTBVSRInterfaceInvalid, hwBTBVSRInterfaceInvalidResume,
|
|
hwBTBSlaveChassisNoHeart, hwBTBNoSlaveChassis, hwBTBSlaveChassisRegisted, hwBTBSlaveChassisRegisteFail, hwBTBChassisTypeConflict,
|
|
hwOpticaPowerAbnormal, hwFPGAAbnormal, hwBrdInserted, hwMinMTunnelDownAlarm, hwMinMTunnelUpAlarm,
|
|
hwSuperChangeSuccesful, hwSuperChangeFailure, hwEpldAbnormal, hwPhyChipAbnormal, hwSerdesAbnormal,
|
|
hwBoardAbnormal, hwFeChannelAbnormal, hwParityCheckAbnormal, hwPhyClockAbnormal, hwPortAutoNegotiateFail, hwPortSemiduplex,
|
|
hwScuStartModeSetFail, hwMemoryExhaust, hwMemoryExhaustClear, hwMethAbnormal, hwLpuNotTight,hwLicenseFail,
|
|
hwHaBatchBegin,hwHaBatchEnd,hwHaSmoothBegin,hwHaSmoothEnd}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification group defined for Datacomm products."
|
|
::= { hwDCTrapGroups 2 }
|
|
|
|
hwDCTrapCompliances OBJECT IDENTIFIER ::= { hwDCTrapConformance 2 }
|
|
|
|
-- compliance statements
|
|
hwDCTrapCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwDCTrapControlGroup, hwDCNotificationGroup }
|
|
::= { hwDCTrapCompliances 1 }
|
|
|
|
|
|
END
|