5890 lines
195 KiB
Plaintext
5890 lines
195 KiB
Plaintext
-- ============================================================================
|
|
-- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description:
|
|
-- Reference:
|
|
-- Version: V2.09
|
|
-- History:
|
|
-- Created by hexingjian 2008-12-30
|
|
-- modified by xuxuguang 2009-12-10
|
|
-- modified by dingshenyu 2011-12-26
|
|
-- modified by wangweiwei 2014-09-18
|
|
-- modified by shafangzhou 2016-06-23
|
|
-- modified by shafangzhou 2016-08-16
|
|
-- modified by shafangzhou 2016-10-11
|
|
-- modified by liuzhongmiao 2017-06-23
|
|
-- ============================================================================
|
|
|
|
HUAWEI-L2MULTICAST-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,OBJECT-TYPE,
|
|
Counter32, Integer32,Unsigned32, IpAddress,Counter64, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
|
|
TruthValue,TEXTUAL-CONVENTION,
|
|
RowStatus, MacAddress, DisplayString
|
|
FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
|
|
VlanIdOrAny
|
|
FROM Q-BRIDGE-MIB
|
|
|
|
InterfaceIndex,InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
|
|
hwDatacomm
|
|
FROM HUAWEI-MIB
|
|
|
|
Ipv6Address
|
|
FROM IPV6-TC
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB;
|
|
|
|
|
|
VlanIdOrAnyOrNone ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a specific VLAN,
|
|
any VLAN, or no VLAN. The special values 0 and 4095
|
|
have the same meaning as described in the VlanIdOrAny
|
|
and VlanIdOrNone TEXTUAL-CONVENTIONs.
|
|
|
|
Note that a MIB object that is defined using this
|
|
TEXTUAL-CONVENTION should clarify the meaning of
|
|
'any VLAN' and 'no VLAN' (i.e., the special values
|
|
0 and 4095)."
|
|
SYNTAX Integer32 (0 | 1..4094 | 4095)
|
|
|
|
hwL2MultiCastMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201706230000Z"
|
|
ORGANIZATION "Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"The MIB module for IGMP Snooping feature.
|
|
|
|
Internet Group Management Protocol (IGMP) is the protocol used
|
|
by IPv4 end hosts to indicate their interest in receiving
|
|
multicast traffic for certain multicast groups to neighboring
|
|
multicast routers.
|
|
IGMP Snooping is a switch protocol. A switch that implements
|
|
IGMP Snooping listens to the IGMP messages exchanged between
|
|
the hosts and router, then provides selective transmission of
|
|
multicast traffic based on multicast mac destination address
|
|
or multicast group address."
|
|
|
|
REVISION "201706230000Z"-- 10 Oct 2016
|
|
DESCRIPTION
|
|
"Add hwL2mcReportListeningGrpExceed ,
|
|
and create 5 params including
|
|
hwL2mcNotificationsAddressType,
|
|
hwL2mcNotificationsExceedLimit,
|
|
hwL2mcNotificationsExceedGroupAddress,
|
|
hwL2mcNotificationsExceedSourceAddress,
|
|
hwL2mcNotificationsPortUserMac "
|
|
|
|
REVISION "201610110000Z"-- 10 Oct 2016
|
|
DESCRIPTION
|
|
"Add hwMldFwdTable."
|
|
|
|
REVISION "201608160000Z"-- 16 Aug 2016
|
|
DESCRIPTION
|
|
"Add hwL2mcLimitGroupTable ."
|
|
|
|
REVISION "201606230000Z"-- 23 Jun 2016
|
|
DESCRIPTION
|
|
"Modify range of hwL2mcLimitMaxBandWidth ."
|
|
|
|
REVISION "201409180000Z"-- 18 Sep 2014
|
|
DESCRIPTION
|
|
"Import NOTIFICATION-TYPE."
|
|
REVISION "201401120000Z"-- 12 Jan 2014
|
|
DESCRIPTION
|
|
"Add new porttype."
|
|
|
|
REVISION "201308280000Z"-- 28 Aug 2013
|
|
DESCRIPTION
|
|
"Modify import mibs."
|
|
|
|
REVISION "201308260000Z"-- 26 Aug 2013
|
|
DESCRIPTION
|
|
"Add hwL2mcNotificationsPortIfName to trap hwL2mcPortOtherQuerierTimeout."
|
|
|
|
REVISION "201308170000Z"-- 17 Aug 2013
|
|
DESCRIPTION
|
|
"Add trap hwL2mcPortOtherQuerierTimeout to the MIB."
|
|
|
|
REVISION "200812300000Z"-- 30 Dec 2008
|
|
DESCRIPTION
|
|
"Initial version of the MIB."
|
|
|
|
::= { hwDatacomm 181 }
|
|
|
|
-- Textual Convention
|
|
|
|
HWPortType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"type of port :
|
|
invalid(1):invalid type,
|
|
pw(2) : pw type,
|
|
switchport(3) : switchport type,
|
|
dot1q(4): dot1q sub-interface type,
|
|
termination(5): termination sub-interface type,
|
|
board(6): interface board number,
|
|
VlanPort(7): Vlanif port,
|
|
qinq-batch-config(9): batch config qinq port ce VLAN ID,
|
|
dot1q-termination-batch-config(10): batch config dot1q termination port ce VLAN ID,
|
|
Main-interface-bound-to-vsi(11): Main interface that bound to vsi"
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid(1),
|
|
pw(2),
|
|
switchport(3),
|
|
dot1q(4),
|
|
termination(5),
|
|
board(6),
|
|
vlanPort(7),
|
|
qinq-batch-config(9),
|
|
dot1q-termination-batch-config(10),
|
|
main-interface-bound-to-vsi(11)
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hwIgspMibObject OBJECT IDENTIFIER ::= { hwL2MultiCastMIB 1 }
|
|
|
|
|
|
--
|
|
-- The hwIgspSystemInfo group.
|
|
--
|
|
hwIgspSystemInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 1 }
|
|
|
|
hwIgmpSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP snooping is enabled or disabled in the global view:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwIgspSystemInfo 1 }
|
|
|
|
hwSendQueryEnabled OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sending of query packets is enabled or disabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
Note: Ensure that you query and configure this object after hwIgmpSnoopingEnabled is configured.
|
|
"
|
|
::= { hwIgspSystemInfo 2 }
|
|
|
|
hwSendQuerySourceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP addresses of the Query messages sent by a device.
|
|
The value ranges from 1.0.0.0 to 223.255.255.255.
|
|
The default value is 192.168.0.1.
|
|
"
|
|
::= { hwIgspSystemInfo 3}
|
|
|
|
|
|
hwL2mcCacTrapInterval OBJECT-TYPE
|
|
SYNTAX Integer32(0..1200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CAC trap interval. The default is 300."
|
|
::= { hwIgspSystemInfo 4}
|
|
|
|
hwL2mcPerformanceStatisticsInterval OBJECT-TYPE
|
|
SYNTAX Integer32(5 |15 | 30 | 60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Performance statistic interval. The default is 15 minute."
|
|
::= { hwIgspSystemInfo 5}
|
|
|
|
|
|
|
|
--
|
|
-- The hwL2mcCfgInfo group.
|
|
--
|
|
hwL2mcCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 2 }
|
|
|
|
hwL2mcCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of IGMP snooping in a VLAN or a VSI."
|
|
::= { hwL2mcCfgInfo 1 }
|
|
|
|
hwL2mcCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device
|
|
and deleted when the VLAN or VSI becomes inactive."
|
|
INDEX { hwL2mcVlanIndex, hwL2mcVsiName }
|
|
::= { hwL2mcCfgTable 1 }
|
|
|
|
HWL2mcCfgEntry ::= SEQUENCE {
|
|
hwL2mcVlanIndex VlanIdOrAny,
|
|
hwL2mcVsiName DisplayString,
|
|
hwL2mcEnabled EnabledStatus,
|
|
hwL2mcRouterAgingTime Integer32,
|
|
hwL2mcMaxQueryRespTime Integer32,
|
|
hwL2mcLastMemQueryInterval Integer32,
|
|
hwL2mcQueryInterval Integer32,
|
|
hwL2mcRobustCount Integer32,
|
|
hwL2mcCheckRouterAlert TruthValue,
|
|
hwL2mcSendRouterAlert TruthValue,
|
|
hwL2mcIgmpVersion INTEGER ,
|
|
hwL2mcFwdMode INTEGER,
|
|
hwL2mcPromptLeaveEnable EnabledStatus,
|
|
hwL2mcPromptLeaveAclNum Integer32,
|
|
hwL2mcRouterPortLearningEnable EnabledStatus,
|
|
hwL2mcReportSuppressEnable EnabledStatus,
|
|
hwL2mcIgmpQuerierEnable EnabledStatus,
|
|
hwL2mcIgmpSsmMappingEnable EnabledStatus,
|
|
hwL2mcSsmAclNum Integer32,
|
|
hwL2mcProxyRouterProtocolPass TruthValue,
|
|
hwL2mcAsmSsmFlag Integer32,
|
|
hwL2mcSrcLifeTime Integer32,
|
|
hwL2mcPerformanceStatistics EnabledStatus,
|
|
hwL2mcQuerierElection EnabledStatus,
|
|
hwETrackEnable EnabledStatus,
|
|
hwL2mcBackupQueryFwd Integer32,
|
|
hwL2mcBackupReportFwd Integer32,
|
|
hwL2mcQuerySuppress Integer32,
|
|
hwL2mcRtLearnRingLinkage TruthValue,
|
|
hwL2mcIgmpIpPolicyAclNum Integer32,
|
|
hwL2mcIgmpSsmMappingPolicy DisplayString,
|
|
hwL2mcRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwL2mcVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcCfgEntry 1 }
|
|
|
|
hwL2mcVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcCfgEntry 2 }
|
|
|
|
hwL2mcEnabled OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether IGMP snooping is enabled in a VLAN or a VSI:
|
|
1:enabled
|
|
2:disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 3 }
|
|
|
|
hwL2mcRouterAgingTime OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aging time of an interface on a router.
|
|
The value ranges from 1 to 1000, in seconds.
|
|
The default value is 180, which router port is created by Igmp Query message.
|
|
And when it is created by PIM hello messge, the default value is the time of Holdtime in the message.
|
|
"
|
|
::= { hwL2mcCfgEntry 4 }
|
|
|
|
hwL2mcMaxQueryRespTime OBJECT-TYPE
|
|
SYNTAX Integer32(1..25)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum response time.
|
|
The value ranges from 1 to 25, in seconds.
|
|
The default value is 10, in seconds.
|
|
"
|
|
::= { hwL2mcCfgEntry 5 }
|
|
|
|
hwL2mcLastMemQueryInterval OBJECT-TYPE
|
|
SYNTAX Integer32(1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last member query interval.
|
|
The value ranges from 1 to 5, in seconds.
|
|
The default value is 1, in seconds.
|
|
"
|
|
::= { hwL2mcCfgEntry 6 }
|
|
|
|
hwL2mcQueryInterval OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The query interval.
|
|
The value ranges from 1 to 65535, in seconds.
|
|
The default value is 60, in seconds.
|
|
"
|
|
::= { hwL2mcCfgEntry 7 }
|
|
|
|
hwL2mcRobustCount OBJECT-TYPE
|
|
SYNTAX Integer32(2..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The robustness variable.
|
|
The value ranges from 2 to 5.
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 8 }
|
|
|
|
hwL2mcCheckRouterAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether to check the router-alert of a packet.
|
|
The default value is false.
|
|
"
|
|
::= { hwL2mcCfgEntry 9 }
|
|
|
|
hwL2mcSendRouterAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether to send the router-alert of a packet.
|
|
The default value is true.
|
|
"
|
|
::= { hwL2mcCfgEntry 10 }
|
|
|
|
hwL2mcIgmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
version1(1),
|
|
version2(2),
|
|
version3(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the IGMP packets.
|
|
The value ranges from 1 to 3.
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 11 }
|
|
|
|
hwL2mcFwdMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ip(1),
|
|
mac(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forwarding mode:
|
|
1: IP
|
|
2: MAC
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcCfgEntry 12 }
|
|
|
|
hwL2mcPromptLeaveEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the prompt leave is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 13 }
|
|
|
|
hwL2mcPromptLeaveAclNum OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the prompt leave complies with the ACL rules. The ACL number can be set.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that no ACL number is set.
|
|
"
|
|
::= { hwL2mcCfgEntry 14 }
|
|
|
|
hwL2mcRouterPortLearningEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether interface learning is enabled or not in a VLAN:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcCfgEntry 15 }
|
|
|
|
hwL2mcReportSuppressEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the suppression of the IGMP Report message (proxy) is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 16 }
|
|
|
|
hwL2mcIgmpQuerierEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the querier is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 17 }
|
|
|
|
hwL2mcIgmpSsmMappingEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether Ssm-Mapping is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 18 }
|
|
|
|
hwL2mcSsmAclNum OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..2999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That SSM complies with the ACL number.
|
|
The ACL number ranges from 2000 to 2999.
|
|
The default value is 0, indicating that no ACL number is set.
|
|
"
|
|
::= { hwL2mcCfgEntry 19 }
|
|
|
|
hwL2mcProxyRouterProtocolPass OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether protocol packets are allowed to pass a router port when proxy is enabled.
|
|
The default value is false.
|
|
"
|
|
::= { hwL2mcCfgEntry 20 }
|
|
|
|
hwL2mcAsmSsmFlag OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That restric study:
|
|
1: asm-ssm
|
|
2: asm-only
|
|
3: ssm-only
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcCfgEntry 21 }
|
|
|
|
hwL2mcSrcLifeTime OBJECT-TYPE
|
|
SYNTAX Integer32(60..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That source aging time:
|
|
range from 60 to 1000
|
|
The default value is 210.
|
|
"
|
|
::= { hwL2mcCfgEntry 22 }
|
|
|
|
hwL2mcPerformanceStatistics OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That performance statistic is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 23 }
|
|
|
|
hwL2mcQuerierElection OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That querier election is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 24 }
|
|
|
|
hwETrackEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host explicity track is enabled:
|
|
1: enabled
|
|
2: disabled
|
|
The default value is 2.
|
|
"
|
|
::= { hwL2mcCfgEntry 25 }
|
|
|
|
hwL2mcBackupQueryFwd OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That IGMP query forward :
|
|
1: Do not forward;
|
|
2: Forward without replace source MAC address;
|
|
3: Forward with replace source MAC address;
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcCfgEntry 26 }
|
|
|
|
hwL2mcBackupReportFwd OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"That IGMP report forward :
|
|
1: Do not forward;
|
|
2: Forward without replace source MAC address;
|
|
3: Forward with replace source MAC address;
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcCfgEntry 27 }
|
|
|
|
hwL2mcQuerySuppress OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether supress IGMP query packet or time of suppress interval.
|
|
"
|
|
::= { hwL2mcCfgEntry 28 }
|
|
|
|
hwL2mcRtLearnRingLinkage OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether responed to link state for SEP.
|
|
"
|
|
::= { hwL2mcCfgEntry 29 }
|
|
|
|
hwL2mcIgmpIpPolicyAclNum OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the IGMP ip policy complies with the ACL rules. The ACL number can be set.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that no ACL number is set.
|
|
"
|
|
::= { hwL2mcCfgEntry 30 }
|
|
hwL2mcIgmpSsmMappingPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy name of SSM mapping.
|
|
"
|
|
::= { hwL2mcCfgEntry 31 }
|
|
|
|
hwL2mcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcCfgEntry 100 }
|
|
|
|
|
|
|
|
--
|
|
-- The hwL2mcStatisticsInfo group.
|
|
--
|
|
hwL2mcStatisticsInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 3 }
|
|
|
|
hwL2mcStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains VLAN or VSI statistics information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcStatisticsInfo 1 }
|
|
|
|
hwL2mcStatisticsEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device
|
|
and deleted when the VLAN or VSI becomes inactive."
|
|
INDEX { hwL2mcStatsVlanIndex, hwL2mcStatsVsiName }
|
|
::= { hwL2mcStatisticsTable 1 }
|
|
|
|
HWL2mcStatisticsEntry ::= SEQUENCE {
|
|
hwL2mcStatsVlanIndex VlanIdOrAny,
|
|
hwL2mcStatsVsiName DisplayString,
|
|
hwL2mcRecvIgmpV1ReportNum Counter32,
|
|
hwL2mcRecvIgmpV2ReportNum Counter32,
|
|
hwL2mcRecvIgmpV3ReportNum Counter32,
|
|
hwL2mcRecvIgmpLeaveNum Counter32,
|
|
hwL2mcRecvIgmpV1QueryNum Counter32,
|
|
hwL2mcRecvIgmpV2QueryNum Counter32,
|
|
hwL2mcRecvIgmpV3QueryNum Counter32,
|
|
hwL2mcRecvPimHelloNum Counter32,
|
|
hwL2mcSendQueryNum Counter32 ,
|
|
hwL2mcSendQuerySourceNum Counter32,
|
|
hwL2mcProxyGenQueryNum Counter32,
|
|
hwL2mcProxyGroupQueryNum Counter32,
|
|
hwL2mcProxyGroupSourceQueryNum Counter32,
|
|
hwL2mcIgmpPacketClearStats TruthValue
|
|
}
|
|
|
|
hwL2mcStatsVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcStatisticsEntry 1 }
|
|
|
|
hwL2mcStatsVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcStatisticsEntry 2 }
|
|
|
|
hwL2mcRecvIgmpV1ReportNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMPv1 Report messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 3 }
|
|
|
|
hwL2mcRecvIgmpV2ReportNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMPv2 Report messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 4 }
|
|
|
|
hwL2mcRecvIgmpV3ReportNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMPv3 Report messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 5 }
|
|
|
|
hwL2mcRecvIgmpLeaveNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMP Leave messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 6 }
|
|
|
|
hwL2mcRecvIgmpV1QueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMPv1 Query messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 7 }
|
|
|
|
hwL2mcRecvIgmpV2QueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMPv2 Query messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 8 }
|
|
|
|
hwL2mcRecvIgmpV3QueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMPv3 Query messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 9 }
|
|
|
|
hwL2mcRecvPimHelloNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of PIM Hello messages received in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 10 }
|
|
|
|
hwL2mcSendQueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMP Query messages (the source address is 0) in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 11 }
|
|
|
|
hwL2mcSendQuerySourceNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMP Query messages (the source address is not 0) in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 12 }
|
|
|
|
hwL2mcProxyGenQueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Query messages sent by the proxy in a VLAN or a VSI."
|
|
::= { hwL2mcStatisticsEntry 13 }
|
|
|
|
hwL2mcProxyGroupQueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Query messages sent by the proxy in a VLAN or a VSI to a specified group."
|
|
::= { hwL2mcStatisticsEntry 14 }
|
|
|
|
hwL2mcProxyGroupSourceQueryNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Query messages sent by the proxy in a VLAN or a VSI to a specified source group."
|
|
::= { hwL2mcStatisticsEntry 15 }
|
|
|
|
hwL2mcIgmpPacketClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether to clear the statistics of IGMP snooping. If the value is 1, it indicates that the statistics need to be cleared."
|
|
::= { hwL2mcStatisticsEntry 30 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcFwdInfo group.
|
|
--
|
|
hwL2mcFwdInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 4 }
|
|
|
|
hwL2mcFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast forward information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcFwdInfo 1 }
|
|
|
|
hwL2mcFwdEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
|
|
a forwarding table entry deleted."
|
|
INDEX { hwL2mcFwdVlanIndex, hwL2mcFwdVsiName, hwL2mcFwdGroupAddress, hwL2mcFwdSourceAddress, hwL2mcFwdPortType,
|
|
hwL2mcFwdPortIfIndex, hwL2mcFwdPortPeId, hwL2mcFwdPortCeId,
|
|
hwL2mcFwdPeerAddress, hwL2mcFwdVcOrSiteId }
|
|
::= { hwL2mcFwdTable 1 }
|
|
|
|
HWL2mcFwdEntry ::= SEQUENCE {
|
|
hwL2mcFwdVlanIndex VlanIdOrAny,
|
|
hwL2mcFwdVsiName DisplayString,
|
|
hwL2mcFwdGroupAddress IpAddress,
|
|
hwL2mcFwdSourceAddress IpAddress,
|
|
hwL2mcFwdPortType HWPortType,
|
|
hwL2mcFwdPortIfIndex InterfaceIndexOrZero,
|
|
hwL2mcFwdPortPeId VlanIdOrAny,
|
|
hwL2mcFwdPortCeId VlanIdOrAny,
|
|
hwL2mcFwdPeerAddress IpAddress,
|
|
hwL2mcFwdVcOrSiteId Unsigned32,
|
|
hwL2mcFwdAddressType INTEGER,
|
|
hwL2mcFwdHostFlag1 INTEGER,
|
|
hwL2mcFwdHostFlag2 INTEGER,
|
|
hwL2mcFwdHostFlag3 INTEGER,
|
|
hwL2mcFwdHostFlag4 INTEGER
|
|
}
|
|
|
|
hwL2mcFwdVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcFwdEntry 1 }
|
|
|
|
hwL2mcFwdVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcFwdEntry 2 }
|
|
|
|
hwL2mcFwdGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcFwdEntry 3 }
|
|
|
|
hwL2mcFwdSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcFwdEntry 4 }
|
|
|
|
hwL2mcFwdPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcFwdEntry 5 }
|
|
|
|
hwL2mcFwdPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcFwdEntry 6 }
|
|
|
|
hwL2mcFwdPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcFwdEntry 7 }
|
|
|
|
hwL2mcFwdPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcFwdEntry 8 }
|
|
|
|
hwL2mcFwdPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcFwdEntry 9 }
|
|
|
|
hwL2mcFwdVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcFwdEntry 10 }
|
|
|
|
hwL2mcFwdAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ip(1),
|
|
mac(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of an entry:
|
|
1: IP
|
|
2: MAC
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcFwdEntry 11 }
|
|
|
|
hwL2mcFwdHostFlag1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2),
|
|
staticDynamic(3),
|
|
invalid(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode to create an interface on the host:
|
|
1: static
|
|
2: dynamic
|
|
3: static and dynamic
|
|
4: invalid
|
|
"
|
|
::= { hwL2mcFwdEntry 18 }
|
|
|
|
hwL2mcFwdHostFlag2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nonMapping(1),
|
|
mapping(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether an interface on the host is created through SSM-mapping:
|
|
1: non-mapping
|
|
2: mapping
|
|
"
|
|
::= { hwL2mcFwdEntry 19 }
|
|
|
|
hwL2mcFwdHostFlag3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
host(1),
|
|
router(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of an interface created on a router:
|
|
1: Interface connected to the host
|
|
2: Router interface that replicates multicast data flows
|
|
"
|
|
::= { hwL2mcFwdEntry 20 }
|
|
|
|
hwL2mcFwdHostFlag4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
port(1),
|
|
static(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates (S, G) table created :
|
|
1: from port;
|
|
2: from static;
|
|
3: from both
|
|
the default value is 1
|
|
"
|
|
::= { hwL2mcFwdEntry 21 }
|
|
hwMldFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMldFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast forward information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcFwdInfo 2 }
|
|
|
|
hwMldFwdEntry OBJECT-TYPE
|
|
SYNTAX HwMldFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
|
|
a forwarding table entry deleted."
|
|
INDEX { hwL2mcFwdVlanIndex, hwL2mcFwdVsiName, hwL2mcFwdGroupAddress, hwL2mcFwdSourceAddress, hwL2mcFwdPortType,
|
|
hwL2mcFwdPortIfIndex, hwL2mcFwdPortPeId, hwL2mcFwdPortCeId, hwL2mcFwdPeerAddress, hwL2mcFwdVcOrSiteId
|
|
}
|
|
::= { hwMldFwdTable 1 }
|
|
|
|
HwMldFwdEntry ::= SEQUENCE {
|
|
hwMldFwdVlanIndex VlanIdOrAny,
|
|
hwMldFwdVsiName DisplayString,
|
|
hwMldFwdGroupAddress Ipv6Address,
|
|
hwMldFwdSourceAddress Ipv6Address,
|
|
hwMldFwdPortType HWPortType,
|
|
hwMldFwdPortIfIndex InterfaceIndexOrZero,
|
|
hwMldFwdPortPeId VlanIdOrAny,
|
|
hwMldFwdPortCeId VlanIdOrAny,
|
|
hwMldFwdPeerAddress Ipv6Address,
|
|
hwMldFwdVcOrSiteId Unsigned32,
|
|
hwMldFwdAddressType INTEGER,
|
|
hwMldFwdHostFlag1 INTEGER,
|
|
hwMldFwdHostFlag2 INTEGER,
|
|
hwMldFwdHostFlag3 INTEGER,
|
|
hwMldFwdHostFlag4 INTEGER
|
|
}
|
|
|
|
hwMldFwdVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwMldFwdEntry 1 }
|
|
|
|
hwMldFwdVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwMldFwdEntry 2 }
|
|
|
|
hwMldFwdGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwMldFwdEntry 3 }
|
|
|
|
hwMldFwdSourceAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwMldFwdEntry 4 }
|
|
|
|
hwMldFwdPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwMldFwdEntry 5 }
|
|
|
|
hwMldFwdPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwMldFwdEntry 6 }
|
|
|
|
hwMldFwdPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwMldFwdEntry 7 }
|
|
|
|
hwMldFwdPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwMldFwdEntry 8 }
|
|
|
|
hwMldFwdPeerAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwMldFwdEntry 9 }
|
|
hwMldFwdVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwMldFwdEntry 10 }
|
|
|
|
hwMldFwdAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ip(1),
|
|
mac(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of an entry:
|
|
1: IP
|
|
2: MAC
|
|
The default value is 1.
|
|
"
|
|
::= { hwMldFwdEntry 11 }
|
|
|
|
hwMldFwdHostFlag1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2),
|
|
staticDynamic(3),
|
|
invalid(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode to create an interface on the host:
|
|
1: static
|
|
2: dynamic
|
|
3: static and dynamic
|
|
4: invalid
|
|
"
|
|
::= { hwMldFwdEntry 12 }
|
|
hwMldFwdHostFlag2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nonMapping(1),
|
|
mapping(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether an interface on the host is created through SSM-mapping:
|
|
1: non-mapping
|
|
2: mapping
|
|
"
|
|
::= { hwMldFwdEntry 13 }
|
|
|
|
hwMldFwdHostFlag3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
host(1),
|
|
router(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of an interface created on a router:
|
|
1: Interface connected to the host
|
|
2: Router interface that replicates multicast data flows
|
|
"
|
|
::= { hwMldFwdEntry 14 }
|
|
|
|
hwMldFwdHostFlag4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
port(1),
|
|
static(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates (S, G) table created :
|
|
1: from port;
|
|
2: from static;
|
|
3: from both
|
|
the default value is 1
|
|
"
|
|
::= { hwMldFwdEntry 15 }
|
|
|
|
--
|
|
-- The hwGroupInfo group.
|
|
--
|
|
hwL2mcGroupInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 5 }
|
|
|
|
hwL2mcGroupInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast group information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcGroupInfo 1 }
|
|
|
|
hwL2mcGroupInfoEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
|
|
a forwarding table entry deleted."
|
|
INDEX { hwL2mcGroupVlanIndex, hwL2mcGroupVsiName, hwL2mcGroupGroupAddress, hwL2mcGroupSourceAddress, hwL2mcPortType,
|
|
hwL2mcGroupPortIfIndex, hwL2mcGroupPortPeId, hwL2mcGroupPortCeId,
|
|
hwL2mcGroupPeerAddress, hwL2mcGroupVcOrSiteId }
|
|
::= { hwL2mcGroupInfoTable 1 }
|
|
|
|
HWL2mcGroupInfoEntry ::= SEQUENCE {
|
|
hwL2mcGroupVlanIndex VlanIdOrAny,
|
|
hwL2mcGroupVsiName DisplayString,
|
|
hwL2mcGroupGroupAddress IpAddress,
|
|
hwL2mcGroupSourceAddress IpAddress,
|
|
hwL2mcPortType HWPortType,
|
|
hwL2mcGroupPortIfIndex InterfaceIndexOrZero,
|
|
hwL2mcGroupPortPeId VlanIdOrAny,
|
|
hwL2mcGroupPortCeId VlanIdOrAny,
|
|
hwL2mcGroupPeerAddress IpAddress,
|
|
hwL2mcGroupVcOrSiteId Unsigned32,
|
|
hwL2mcSourceUpTime Counter32,
|
|
hwL2mcSourceExpires Counter32,
|
|
hwL2mcGroupUpTime Counter32,
|
|
hwL2mcGroupExpires Counter32,
|
|
hwL2mcGroupFilterFlag INTEGER,
|
|
hwL2mcGroupHostFlag1 INTEGER,
|
|
hwL2mcGroupHostFlag2 INTEGER,
|
|
hwL2mcGroupRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcGroupVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 1 }
|
|
|
|
hwL2mcGroupVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcGroupInfoEntry 2 }
|
|
|
|
hwL2mcGroupGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of a multicast group."
|
|
::= { hwL2mcGroupInfoEntry 3 }
|
|
|
|
hwL2mcGroupSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcGroupInfoEntry 4 }
|
|
|
|
hwL2mcPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 5 }
|
|
|
|
hwL2mcGroupPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcGroupInfoEntry 6 }
|
|
|
|
hwL2mcGroupPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 7 }
|
|
|
|
hwL2mcGroupPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 8 }
|
|
|
|
hwL2mcGroupPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcGroupInfoEntry 9 }
|
|
|
|
hwL2mcGroupVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcGroupInfoEntry 10 }
|
|
|
|
hwL2mcSourceUpTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How long the source group exists in the forwarding entry."
|
|
::= { hwL2mcGroupInfoEntry 14 }
|
|
|
|
hwL2mcSourceExpires OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period of the source group in the forwarding entry, that is, the aging time of the source group."
|
|
::= { hwL2mcGroupInfoEntry 15 }
|
|
|
|
hwL2mcGroupUpTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How long the group exists in the forwarding entry."
|
|
::= { hwL2mcGroupInfoEntry 16 }
|
|
|
|
hwL2mcGroupExpires OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the group expires in the forwarding entry, that is, the aging time of the source group."
|
|
::= { hwL2mcGroupInfoEntry 17 }
|
|
|
|
hwL2mcGroupFilterFlag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
include(1),
|
|
exclude(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filtering mode:
|
|
1: include
|
|
2: exclude
|
|
3: invalid
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 18 }
|
|
|
|
hwL2mcGroupHostFlag1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2),
|
|
staticDynamic(3),
|
|
invalid(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode to create an interface on the host:
|
|
1: static
|
|
2: dynamic
|
|
3: static and dynamic
|
|
4: invalid
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 19 }
|
|
|
|
hwL2mcGroupHostFlag2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nonMapping(1),
|
|
mapping(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether an interface on the host is created through SSM-mapping:
|
|
1: non-mapping
|
|
2: mapping
|
|
"
|
|
::= { hwL2mcGroupInfoEntry 20 }
|
|
|
|
hwL2mcGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcGroupInfoEntry 100 }
|
|
|
|
|
|
|
|
--
|
|
-- The hwL2mcGroupCfgInfo group.
|
|
--
|
|
hwL2mcGroupCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 6 }
|
|
|
|
hwL2mcGroupCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast static group information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcGroupCfgInfo 1 }
|
|
|
|
hwL2mcGroupCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a static group entry and delete when
|
|
a static group entry deleted."
|
|
INDEX { hwGroupCfgPortType, hwGroupCfgPortIfIndex, hwGroupCfgPortPeId, hwGroupCfgPortCeId,
|
|
hwGroupCfgPeerAddress, hwGroupCfgVcOrSiteId, hwGroupCfgVlanIndex, hwGroupCfgVsiName,
|
|
hwGroupCfgGroupAddress, hwGroupCfgSourceAddress }
|
|
::= { hwL2mcGroupCfgTable 1 }
|
|
|
|
HWL2mcGroupCfgEntry ::= SEQUENCE {
|
|
hwGroupCfgPortType HWPortType,
|
|
hwGroupCfgPortIfIndex InterfaceIndexOrZero,
|
|
hwGroupCfgPortPeId VlanIdOrAny,
|
|
hwGroupCfgPortCeId VlanIdOrAny,
|
|
hwGroupCfgPeerAddress IpAddress,
|
|
hwGroupCfgVcOrSiteId Unsigned32,
|
|
hwGroupCfgVlanIndex VlanIdOrAny,
|
|
hwGroupCfgVsiName DisplayString,
|
|
hwGroupCfgGroupAddress IpAddress,
|
|
hwGroupCfgSourceAddress IpAddress,
|
|
hwGroupCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwGroupCfgPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcGroupCfgEntry 1 }
|
|
|
|
hwGroupCfgPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcGroupCfgEntry 2 }
|
|
|
|
hwGroupCfgPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcGroupCfgEntry 3 }
|
|
|
|
hwGroupCfgPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcGroupCfgEntry 4 }
|
|
|
|
hwGroupCfgPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcGroupCfgEntry 5 }
|
|
|
|
hwGroupCfgVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcGroupCfgEntry 6 }
|
|
|
|
hwGroupCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcGroupCfgEntry 7 }
|
|
|
|
hwGroupCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcGroupCfgEntry 8 }
|
|
|
|
hwGroupCfgGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcGroupCfgEntry 9 }
|
|
|
|
hwGroupCfgSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcGroupCfgEntry 10 }
|
|
|
|
hwGroupCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcGroupCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcSsmSourceInfo group.
|
|
--
|
|
hwL2mcSsmSourceInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 7 }
|
|
|
|
hwL2mcSsmSourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcSsmSourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the configuration of the source address list of SSM-Mapping."
|
|
::= { hwL2mcSsmSourceInfo 1 }
|
|
|
|
hwL2mcSsmSourceEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcSsmSourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device add an entry for SSM-Mapping."
|
|
INDEX { hwL2mcSsmSourceVlanIndex, hwL2mcSsmSourceVsiName,
|
|
hwL2mcSsmGroupAddress, hwL2mcSsmGroupLen, hwL2mcSsmSourceAddress
|
|
}
|
|
::= { hwL2mcSsmSourceTable 1 }
|
|
|
|
HWL2mcSsmSourceEntry ::= SEQUENCE {
|
|
hwL2mcSsmSourceVlanIndex VlanIdOrAny,
|
|
hwL2mcSsmSourceVsiName DisplayString,
|
|
hwL2mcSsmGroupAddress IpAddress,
|
|
hwL2mcSsmGroupLen Integer32,
|
|
hwL2mcSsmSourceAddress IpAddress,
|
|
hwL2mcSsmSourceRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcSsmSourceVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcSsmSourceEntry 1 }
|
|
|
|
hwL2mcSsmSourceVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcSsmSourceEntry 2 }
|
|
|
|
hwL2mcSsmGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of a multicast group. "
|
|
::= { hwL2mcSsmSourceEntry 3 }
|
|
|
|
hwL2mcSsmGroupLen OBJECT-TYPE
|
|
SYNTAX Integer32(4..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask length of a multicast group."
|
|
::= { hwL2mcSsmSourceEntry 4 }
|
|
|
|
hwL2mcSsmSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of SSM-Mapping, which serves as an index of this table."
|
|
::= { hwL2mcSsmSourceEntry 5 }
|
|
|
|
hwL2mcSsmSourceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcSsmSourceEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcPortGroupPolicyCfgInfo group.
|
|
--
|
|
hwL2mcPortGroupPolicyCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 8 }
|
|
|
|
hwL2mcPortGroupPolicyCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcPortGroupPolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In this table, you can query or configure a group policy to filter entries on a port."
|
|
::= { hwL2mcPortGroupPolicyCfgInfo 1 }
|
|
|
|
hwL2mcPortGroupPolicyCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcPortGroupPolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device when a group policy added."
|
|
INDEX { hwPortGroupPolicyPortType, hwPortGroupPolicyPortIfIndex, hwPortGroupPolicyPortPeId, hwPortGroupPolicyPortCeId,
|
|
hwPortGroupPolicyPeerAddress, hwPortGroupPolicyVcOrSiteId,hwPortGroupPolicyVlanIndex, hwPortGroupPolicyVsiName
|
|
}
|
|
::= { hwL2mcPortGroupPolicyCfgTable 1 }
|
|
|
|
HWL2mcPortGroupPolicyCfgEntry ::= SEQUENCE {
|
|
hwPortGroupPolicyPortType HWPortType,
|
|
hwPortGroupPolicyPortIfIndex InterfaceIndexOrZero,
|
|
hwPortGroupPolicyPortPeId VlanIdOrAny,
|
|
hwPortGroupPolicyPortCeId VlanIdOrAny,
|
|
hwPortGroupPolicyPeerAddress IpAddress,
|
|
hwPortGroupPolicyVcOrSiteId Unsigned32,
|
|
hwPortGroupPolicyVlanIndex VlanIdOrAny,
|
|
hwPortGroupPolicyVsiName DisplayString,
|
|
hwPortGroupPolicyAclNum Integer32,
|
|
hwPortGroupPolicyIgmpVersion INTEGER,
|
|
hwPortGroupPolicyRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwPortGroupPolicyPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
9: batch config qinq port ce VLAN ID
|
|
10: batch config dot1q termination port ce VLAN ID
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 1 }
|
|
|
|
hwPortGroupPolicyPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 2 }
|
|
|
|
hwPortGroupPolicyPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 3 }
|
|
|
|
hwPortGroupPolicyPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 4 }
|
|
|
|
hwPortGroupPolicyPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 5 }
|
|
|
|
hwPortGroupPolicyVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 6 }
|
|
|
|
hwPortGroupPolicyVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 7 }
|
|
|
|
hwPortGroupPolicyVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 8 }
|
|
|
|
hwPortGroupPolicyAclNum OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of a basic ACL.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that the value is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 9 }
|
|
|
|
hwPortGroupPolicyIgmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
version1(1),
|
|
version2(2),
|
|
version3(3),
|
|
versionAll(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP version.
|
|
The value ranges from 1 to 4.
|
|
The default is 4, indicating that no version is specified.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 10 }
|
|
|
|
hwPortGroupPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcPortGroupPolicyCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcChnlCfgInfo group.
|
|
--
|
|
hwL2mcChnlCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 9 }
|
|
|
|
hwL2mcChnlCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcChnlCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of a channel."
|
|
::= { hwL2mcChnlCfgInfo 1 }
|
|
|
|
hwL2mcChnlCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcChnlCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of channel is created for each VLAN or VSI in the device create an channel."
|
|
INDEX { hwChnlCfgVlanIndex, hwChnlCfgVsiName, hwChnlCfgChnlName
|
|
}
|
|
::= { hwL2mcChnlCfgTable 1 }
|
|
|
|
HWL2mcChnlCfgEntry ::= SEQUENCE {
|
|
hwChnlCfgVlanIndex VlanIdOrAny,
|
|
hwChnlCfgVsiName DisplayString,
|
|
hwChnlCfgChnlName DisplayString,
|
|
hwChnlCfgChnlType INTEGER,
|
|
hwChnlCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwChnlCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN.
|
|
If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcChnlCfgEntry 1 }
|
|
|
|
hwChnlCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI.
|
|
If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
|
|
::= { hwL2mcChnlCfgEntry 2 }
|
|
|
|
hwChnlCfgChnlName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel name."
|
|
::= { hwL2mcChnlCfgEntry 3 }
|
|
|
|
hwChnlCfgChnlType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ssm(1),
|
|
asm(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel type:
|
|
1: SSM
|
|
2: ASM
|
|
"
|
|
::= { hwL2mcChnlCfgEntry 9 }
|
|
|
|
|
|
|
|
hwChnlCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcChnlCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcLimitInfo group.
|
|
--
|
|
hwL2mcLimitInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 10 }
|
|
|
|
hwL2mcLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of IGMP snooping CAC in a VLAN or a VSI."
|
|
::= { hwL2mcLimitInfo 1 }
|
|
|
|
hwL2mcLimitEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping CAC in a VLAN or a VSI."
|
|
INDEX { hwL2mcLimitVlanIndex, hwL2mcLimitVsiName, hwL2mcLimitChnlName }
|
|
::= { hwL2mcLimitTable 1 }
|
|
|
|
HWL2mcLimitEntry ::= SEQUENCE {
|
|
hwL2mcLimitVlanIndex VlanIdOrAny,
|
|
hwL2mcLimitVsiName DisplayString,
|
|
hwL2mcLimitChnlName DisplayString,
|
|
hwL2mcLimitMaxEntry Integer32,
|
|
hwL2mcLimitEntryCnt Counter32,
|
|
hwL2mcLimitMaxBandWidth Integer32,
|
|
hwL2mcLimitBandWidth Counter32,
|
|
hwL2mcLimitAcl Integer32,
|
|
hwL2mcLimitCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcLimitVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN.
|
|
If a VSI is specified, the value is 4095. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcLimitEntry 1 }
|
|
|
|
hwL2mcLimitVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32.
|
|
If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global."
|
|
::= { hwL2mcLimitEntry 2 }
|
|
|
|
hwL2mcLimitChnlName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel name."
|
|
::= { hwL2mcLimitEntry 3 }
|
|
|
|
hwL2mcLimitMaxEntry OBJECT-TYPE
|
|
SYNTAX Integer32(0..16384)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of forwarding entries. The value 0 indicates that the number is invalid."
|
|
::= { hwL2mcLimitEntry 4 }
|
|
|
|
hwL2mcLimitEntryCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of current forwarding entries."
|
|
::= { hwL2mcLimitEntry 5 }
|
|
|
|
hwL2mcLimitMaxBandWidth OBJECT-TYPE
|
|
SYNTAX Integer32(0..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum bandwidth. The value 0 indicates that the bandwidth is invalid."
|
|
::= { hwL2mcLimitEntry 6 }
|
|
|
|
hwL2mcLimitBandWidth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current bandwidth."
|
|
::= { hwL2mcLimitEntry 7 }
|
|
|
|
hwL2mcLimitAcl OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ACL for the multicast groups that do not need to be configured with CAC limit.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that the number is invalid.
|
|
"
|
|
::= { hwL2mcLimitEntry 8 }
|
|
|
|
hwL2mcLimitCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcLimitEntry 100 }
|
|
|
|
hwL2mcLimitGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2mcLimitGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwL2mcLimitInfo 2 }
|
|
|
|
hwL2mcLimitGroupEntry OBJECT-TYPE
|
|
SYNTAX HwL2mcLimitGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
INDEX { hwL2mcLimitGroupIndex }
|
|
::= { hwL2mcLimitGroupTable 1 }
|
|
|
|
HwL2mcLimitGroupEntry ::=
|
|
SEQUENCE {
|
|
hwL2mcLimitGroupIndex
|
|
Unsigned32,
|
|
hwL2mcLimitGroupStartAddr
|
|
IpAddress,
|
|
hwL2mcLimitGroupEndAddr
|
|
IpAddress,
|
|
hwL2mcLimitGroupBandwidth
|
|
Unsigned32
|
|
}
|
|
|
|
hwL2mcLimitGroupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwL2mcLimitGroupEntry 1 }
|
|
|
|
hwL2mcLimitGroupStartAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwL2mcLimitGroupEntry 2 }
|
|
|
|
hwL2mcLimitGroupEndAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwL2mcLimitGroupEntry 3 }
|
|
|
|
hwL2mcLimitGroupBandwidth OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..100000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwL2mcLimitGroupEntry 4 }
|
|
--
|
|
-- The hwL2mcPortLimitInfo group.
|
|
--
|
|
hwL2mcPortLimitInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 11 }
|
|
|
|
hwL2mcPortLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcPortLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of IGMP snooping CAC on an interface."
|
|
::= { hwL2mcPortLimitInfo 1 }
|
|
|
|
hwL2mcPortLimitEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcPortLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping CAC on an interface."
|
|
INDEX { hwPortLimitVlanIndex, hwPortLimitVsiName, hwPortLimitPortType,
|
|
hwPortLimitIfIndex, hwPortLimitPeId, hwPortLimitCeId,
|
|
hwPortLimitPeerAddress, hwPortLimitVcOrSiteId, hwPortLimitChnlName }
|
|
::= { hwL2mcPortLimitTable 1 }
|
|
|
|
HWL2mcPortLimitEntry ::= SEQUENCE {
|
|
hwPortLimitVlanIndex VlanIdOrAny,
|
|
hwPortLimitVsiName DisplayString,
|
|
hwPortLimitPortType HWPortType,
|
|
hwPortLimitIfIndex InterfaceIndexOrZero,
|
|
hwPortLimitPeId VlanIdOrAny,
|
|
hwPortLimitCeId VlanIdOrAny,
|
|
hwPortLimitPeerAddress IpAddress,
|
|
hwPortLimitVcOrSiteId Unsigned32,
|
|
hwPortLimitChnlName DisplayString,
|
|
hwPortLimitAcl Integer32,
|
|
hwPortLimitMaxEntry Integer32,
|
|
hwPortLimitEntryCnt Counter32,
|
|
hwPortLimitMaxBandWidth Integer32,
|
|
hwPortLimitBandWidth Counter32,
|
|
hwPortLimitCfgRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwPortLimitVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcPortLimitEntry 1 }
|
|
|
|
hwPortLimitVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcPortLimitEntry 2 }
|
|
|
|
hwPortLimitPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
9: batch config qinq port ce VLAN ID
|
|
10: batch config dot1q termination port ce VLAN ID
|
|
"
|
|
::= { hwL2mcPortLimitEntry 3 }
|
|
|
|
hwPortLimitIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcPortLimitEntry 4 }
|
|
|
|
hwPortLimitPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortLimitEntry 5 }
|
|
|
|
hwPortLimitCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortLimitEntry 6 }
|
|
|
|
hwPortLimitPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcPortLimitEntry 7 }
|
|
|
|
hwPortLimitVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcPortLimitEntry 8 }
|
|
|
|
hwPortLimitChnlName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel name."
|
|
::= { hwL2mcPortLimitEntry 9 }
|
|
|
|
hwPortLimitAcl OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ACL for the multicast groups that do not need to be configured with CAC limit.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that the number is invalid.
|
|
"
|
|
::= { hwL2mcPortLimitEntry 10 }
|
|
|
|
hwPortLimitMaxEntry OBJECT-TYPE
|
|
SYNTAX Integer32(0..16384)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of forwarding entries. The value 0 indicates that the number is invalid."
|
|
::= { hwL2mcPortLimitEntry 11 }
|
|
|
|
hwPortLimitEntryCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of current forwarding entries."
|
|
::= { hwL2mcPortLimitEntry 12 }
|
|
|
|
hwPortLimitMaxBandWidth OBJECT-TYPE
|
|
SYNTAX Integer32(0..4194304)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum bandwidth. The value 0 indicates that the bandwidth is invalid."
|
|
::= { hwL2mcPortLimitEntry 13 }
|
|
|
|
hwPortLimitBandWidth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current bandwidth."
|
|
::= { hwL2mcPortLimitEntry 14 }
|
|
|
|
hwPortLimitCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcPortLimitEntry 100 }
|
|
|
|
|
|
|
|
--
|
|
-- The hwL2mcFastChnlCfgInfo group.
|
|
--
|
|
hwL2mcFastChnlCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 12 }
|
|
|
|
hwL2mcFastChnlCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcFastChnlCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast fast forward information for IGMP Snooping."
|
|
::= { hwL2mcFastChnlCfgInfo 1 }
|
|
|
|
hwL2mcFastChnlCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcFastChnlCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping fast channel."
|
|
INDEX { hwL2mcFastChnlCfgVlanIndex, hwL2mcFastChnlCfgVsiName,
|
|
hwL2mcFastChnlCfgGroupAddress, hwL2mcFastChnlCfgGroupLen,
|
|
hwL2mcFastChnlCfgSourceAddress, hwL2mcFastChnlCfgSourceLen
|
|
}
|
|
::= { hwL2mcFastChnlCfgTable 1 }
|
|
|
|
HWL2mcFastChnlCfgEntry ::= SEQUENCE {
|
|
hwL2mcFastChnlCfgVlanIndex VlanIdOrAny,
|
|
hwL2mcFastChnlCfgVsiName DisplayString,
|
|
hwL2mcFastChnlCfgGroupAddress IpAddress,
|
|
hwL2mcFastChnlCfgGroupLen Integer32,
|
|
hwL2mcFastChnlCfgSourceAddress IpAddress ,
|
|
hwL2mcFastChnlCfgSourceLen Integer32 ,
|
|
hwL2mcFastChnlCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcFastChnlCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcFastChnlCfgEntry 1 }
|
|
|
|
hwL2mcFastChnlCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcFastChnlCfgEntry 2 }
|
|
|
|
hwL2mcFastChnlCfgGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcFastChnlCfgEntry 3 }
|
|
|
|
hwL2mcFastChnlCfgGroupLen OBJECT-TYPE
|
|
SYNTAX Integer32(16..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask length of a multicast group address."
|
|
::= { hwL2mcFastChnlCfgEntry 4 }
|
|
|
|
hwL2mcFastChnlCfgSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcFastChnlCfgEntry 5 }
|
|
|
|
hwL2mcFastChnlCfgSourceLen OBJECT-TYPE
|
|
SYNTAX Integer32(0|16..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask length of a multicast source address."
|
|
::= { hwL2mcFastChnlCfgEntry 6 }
|
|
|
|
hwL2mcFastChnlCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcFastChnlCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcRouterPortInfo group.
|
|
--
|
|
hwL2mcRouterPortInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 13 }
|
|
|
|
hwL2mcRouterPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcRouterPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast router port information for IGMP Snooping."
|
|
::= { hwL2mcRouterPortInfo 1 }
|
|
|
|
hwL2mcRouterPortInfoEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcRouterPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping router port on an interface."
|
|
INDEX { hwL2mcRouterPortVlanIndex, hwL2mcRouterPortVsiName, hwL2mcRouterPortType, hwL2mcRouterPortIfIndex,
|
|
hwL2mcRouterPortPeId, hwL2mcRouterPortCeId, hwL2mcRouterPortPeerAddress, hwL2mcRouterPortVcOrSiteId }
|
|
::= { hwL2mcRouterPortInfoTable 1 }
|
|
|
|
HWL2mcRouterPortInfoEntry ::= SEQUENCE {
|
|
hwL2mcRouterPortVlanIndex VlanIdOrAny,
|
|
hwL2mcRouterPortVsiName DisplayString,
|
|
hwL2mcRouterPortType HWPortType ,
|
|
hwL2mcRouterPortIfIndex InterfaceIndexOrZero ,
|
|
hwL2mcRouterPortPeId VlanIdOrAny,
|
|
hwL2mcRouterPortCeId VlanIdOrAny,
|
|
hwL2mcRouterPortPeerAddress IpAddress,
|
|
hwL2mcRouterPortVcOrSiteId Unsigned32,
|
|
hwL2mcRouterPortGroupUpTime Counter32,
|
|
hwL2mcRouterPortGroupExpires Counter32,
|
|
hwL2mcRouterPortGroupHostFlag1 INTEGER
|
|
}
|
|
|
|
hwL2mcRouterPortVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcRouterPortInfoEntry 1 }
|
|
|
|
hwL2mcRouterPortVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcRouterPortInfoEntry 2 }
|
|
|
|
hwL2mcRouterPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcRouterPortInfoEntry 3 }
|
|
|
|
hwL2mcRouterPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcRouterPortInfoEntry 4 }
|
|
|
|
hwL2mcRouterPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouterPortInfoEntry 5 }
|
|
|
|
hwL2mcRouterPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouterPortInfoEntry 6 }
|
|
|
|
hwL2mcRouterPortPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcRouterPortInfoEntry 7 }
|
|
|
|
hwL2mcRouterPortVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcRouterPortInfoEntry 8 }
|
|
|
|
hwL2mcRouterPortGroupUpTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How long the group exists in the forwarding entry."
|
|
::= { hwL2mcRouterPortInfoEntry 16 }
|
|
|
|
hwL2mcRouterPortGroupExpires OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period of the router port, that is, the aging time of the router port."
|
|
::= { hwL2mcRouterPortInfoEntry 17 }
|
|
|
|
hwL2mcRouterPortGroupHostFlag1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2),
|
|
staticDynamic(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode to create an interface on the host:
|
|
1: static
|
|
2: dynamic
|
|
3: static and dynamic
|
|
"
|
|
::= { hwL2mcRouterPortInfoEntry 19 }
|
|
|
|
|
|
|
|
--
|
|
--
|
|
-- The hwL2mcRouterPortCfgInfo group.
|
|
--
|
|
hwL2mcRouterPortCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 14 }
|
|
|
|
hwL2mcRouterPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcRouterPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast configuration of router port for IGMP Snooping."
|
|
::= { hwL2mcRouterPortCfgInfo 1 }
|
|
|
|
hwL2mcRouterPortCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcRouterPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping static router port on an interface."
|
|
INDEX { hwL2mcRouterPortCfgPortType, hwL2mcRouterPortCfgPortIfIndex, hwL2mcRouterPortCfgPortPeId , hwL2mcRouterPortCfgPortCeId ,
|
|
hwL2mcRouterPortCfgPeerAddress , hwL2mcRouterPortCfgVcOrSiteId, hwL2mcRouterPortCfgVlanIndex, hwL2mcRouterPortCfgVsiName }
|
|
::= { hwL2mcRouterPortCfgTable 1 }
|
|
|
|
HWL2mcRouterPortCfgEntry ::= SEQUENCE {
|
|
hwL2mcRouterPortCfgPortType HWPortType ,
|
|
hwL2mcRouterPortCfgPortIfIndex InterfaceIndexOrZero ,
|
|
hwL2mcRouterPortCfgPortPeId VlanIdOrAny,
|
|
hwL2mcRouterPortCfgPortCeId VlanIdOrAny,
|
|
hwL2mcRouterPortCfgPeerAddress IpAddress,
|
|
hwL2mcRouterPortCfgVcOrSiteId Unsigned32,
|
|
hwL2mcRouterPortCfgVlanIndex VlanIdOrAny,
|
|
hwL2mcRouterPortCfgVsiName DisplayString,
|
|
hwL2mcRouterPortCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcRouterPortCfgPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcRouterPortCfgEntry 1 }
|
|
|
|
hwL2mcRouterPortCfgPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcRouterPortCfgEntry 2 }
|
|
|
|
hwL2mcRouterPortCfgPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouterPortCfgEntry 3 }
|
|
|
|
hwL2mcRouterPortCfgPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouterPortCfgEntry 4 }
|
|
|
|
hwL2mcRouterPortCfgPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcRouterPortCfgEntry 5 }
|
|
|
|
hwL2mcRouterPortCfgVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcRouterPortCfgEntry 6 }
|
|
|
|
hwL2mcRouterPortCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcRouterPortCfgEntry 7 }
|
|
|
|
hwL2mcRouterPortCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcRouterPortCfgEntry 8 }
|
|
|
|
hwL2mcRouterPortCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcRouterPortCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcChnlGroupCfgInfo group.
|
|
--
|
|
hwL2mcChnlGroupCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 15 }
|
|
|
|
hwL2mcChnlGroupCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcChnlGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the group configurations of a channel."
|
|
::= { hwL2mcChnlGroupCfgInfo 1 }
|
|
|
|
hwL2mcChnlGroupCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcChnlGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of channel is created for each VLAN or VSI in the device create an channel."
|
|
INDEX { hwChnlGroupCfgVlanIndex , hwChnlGroupCfgVsiName , hwChnlCfgGroupChnlName, hwChnlGroupCfgGroupAddress ,
|
|
hwChnlGroupCfgGroupLen, hwChnlGroupCfgSourceAddress , hwChnlGroupCfgSourceLen
|
|
}
|
|
::= { hwL2mcChnlGroupCfgTable 1 }
|
|
|
|
HWL2mcChnlGroupCfgEntry ::= SEQUENCE {
|
|
hwChnlGroupCfgVlanIndex VlanIdOrAny,
|
|
hwChnlGroupCfgVsiName DisplayString,
|
|
hwChnlCfgGroupChnlName DisplayString,
|
|
hwChnlGroupCfgGroupAddress IpAddress,
|
|
hwChnlGroupCfgGroupLen Integer32,
|
|
hwChnlGroupCfgSourceAddress IpAddress,
|
|
hwChnlGroupCfgSourceLen Integer32,
|
|
hwChnlGroupCfgPerBand Integer32,
|
|
hwChnlGroupCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwChnlGroupCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN.
|
|
If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcChnlGroupCfgEntry 1 }
|
|
|
|
hwChnlGroupCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI.
|
|
If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
|
|
::= { hwL2mcChnlGroupCfgEntry 2 }
|
|
|
|
hwChnlCfgGroupChnlName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel name."
|
|
::= { hwL2mcChnlGroupCfgEntry 3 }
|
|
|
|
|
|
hwChnlGroupCfgGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcChnlGroupCfgEntry 4 }
|
|
|
|
|
|
hwChnlGroupCfgGroupLen OBJECT-TYPE
|
|
SYNTAX Integer32(4..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask length of a multicast group."
|
|
::= { hwL2mcChnlGroupCfgEntry 5 }
|
|
|
|
hwChnlGroupCfgSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcChnlGroupCfgEntry 6 }
|
|
|
|
hwChnlGroupCfgSourceLen OBJECT-TYPE
|
|
SYNTAX Integer32(0|8..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask length of a multicast source address."
|
|
::= { hwL2mcChnlGroupCfgEntry 7 }
|
|
|
|
hwChnlGroupCfgPerBand OBJECT-TYPE
|
|
SYNTAX Integer32(0..131072)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bandwidth of a multicast group."
|
|
::= { hwL2mcChnlGroupCfgEntry 9 }
|
|
|
|
hwChnlGroupCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcChnlGroupCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcGroupPolicyCfgInfo group.
|
|
--
|
|
hwL2mcGroupPolicyCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 16 }
|
|
|
|
hwL2mcGroupPolicyCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcGroupPolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In this table, you can query or configure a group policy to filter entries on a port."
|
|
::= { hwL2mcGroupPolicyCfgInfo 1 }
|
|
|
|
hwL2mcGroupPolicyCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcGroupPolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device when a group policy added."
|
|
INDEX { hwGroupPolicyVlanIndex, hwGroupPolicyVsiName
|
|
}
|
|
::= { hwL2mcGroupPolicyCfgTable 1 }
|
|
|
|
HWL2mcGroupPolicyCfgEntry ::= SEQUENCE {
|
|
hwGroupPolicyVlanIndex VlanIdOrAny,
|
|
hwGroupPolicyVsiName DisplayString,
|
|
hwGroupPolicyAclNum Integer32,
|
|
hwGroupPolicyIgmpVersion INTEGER,
|
|
hwGroupPolicyRowStatus RowStatus
|
|
}
|
|
|
|
hwGroupPolicyVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcGroupPolicyCfgEntry 1 }
|
|
|
|
hwGroupPolicyVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcGroupPolicyCfgEntry 2 }
|
|
|
|
|
|
hwGroupPolicyAclNum OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of a basic ACL.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that the value is invalid.
|
|
"
|
|
::= { hwL2mcGroupPolicyCfgEntry 3 }
|
|
|
|
hwGroupPolicyIgmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
version1(1),
|
|
version2(2),
|
|
version3(3),
|
|
versionAll(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP version.
|
|
The value ranges from 1 to 4.
|
|
The default is 4, indicating that no version is specified.
|
|
"
|
|
::= { hwL2mcGroupPolicyCfgEntry 4 }
|
|
|
|
hwGroupPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcGroupPolicyCfgEntry 100 }
|
|
|
|
--
|
|
-- The hwL2mcChnlDenyCfgInfo group.
|
|
--
|
|
hwL2mcChnlDenyCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 17 }
|
|
|
|
hwL2mcChnlDenyCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcChnlDenyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of deny unspecified group for each VLAN or VSI, or in global."
|
|
::= { hwL2mcChnlDenyCfgInfo 1 }
|
|
|
|
hwL2mcChnlDenyCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcChnlDenyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of channel deny is created for each VLAN or VSI in the device create an channel."
|
|
INDEX { hwChnlDenyCfgVlanIndex, hwChnlDenyCfgVsiName
|
|
}
|
|
::= { hwL2mcChnlDenyCfgTable 1 }
|
|
|
|
HWL2mcChnlDenyCfgEntry ::= SEQUENCE {
|
|
hwChnlDenyCfgVlanIndex VlanIdOrAny,
|
|
hwChnlDenyCfgVsiName DisplayString,
|
|
hwChnlDenyCfg INTEGER,
|
|
hwChnlDenyCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwChnlDenyCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN.
|
|
If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcChnlDenyCfgEntry 1 }
|
|
|
|
hwChnlDenyCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI.
|
|
If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
|
|
::= { hwL2mcChnlDenyCfgEntry 2 }
|
|
|
|
|
|
hwChnlDenyCfg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
forward(1),
|
|
discard(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether discard unspecified channel:
|
|
1: not discard
|
|
2: discard
|
|
"
|
|
::= { hwL2mcChnlDenyCfgEntry 3 }
|
|
|
|
|
|
hwChnlDenyCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcChnlDenyCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcQinQPortTable group.
|
|
--
|
|
hwL2mcQinQPortInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 18 }
|
|
|
|
hwL2mcQinQPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcQinQPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the specific port statistic of QinQ table of protol."
|
|
::= { hwL2mcQinQPortInfo 1 }
|
|
|
|
hwL2mcQinQPortEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcQinQPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the specific port statistic of QinQ table of protol."
|
|
INDEX { hwQinQPortVlanIndex, hwQinQPortVsiName, hwL2mcQinQPortIfIndex, hwQinQPortGroupAddr,
|
|
hwQinQPortSourceAddr, hwQinQPortPe, hwQinQPortCe
|
|
}
|
|
::= { hwL2mcQinQPortTable 1 }
|
|
|
|
HWL2mcQinQPortEntry ::= SEQUENCE {
|
|
hwQinQPortVlanIndex VlanIdOrAny,
|
|
hwQinQPortVsiName DisplayString,
|
|
hwL2mcQinQPortIfIndex InterfaceIndexOrZero,
|
|
hwQinQPortGroupAddr IpAddress,
|
|
hwQinQPortSourceAddr IpAddress,
|
|
hwQinQPortPe VlanIdOrAny,
|
|
hwQinQPortCe VlanIdOrAny,
|
|
hwQinQPortTime Counter32,
|
|
hwQinQPortFlag Integer32
|
|
}
|
|
|
|
hwQinQPortVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN.
|
|
If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcQinQPortEntry 1 }
|
|
|
|
hwQinQPortVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI.
|
|
If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
|
|
::= { hwL2mcQinQPortEntry 2 }
|
|
|
|
hwL2mcQinQPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcQinQPortEntry 3 }
|
|
|
|
hwQinQPortGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcQinQPortEntry 4 }
|
|
|
|
hwQinQPortSourceAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcQinQPortEntry 5 }
|
|
|
|
hwQinQPortPe OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinQPortEntry 6 }
|
|
|
|
hwQinQPortCe OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinQPortEntry 7 }
|
|
|
|
hwQinQPortTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of QinQ Port entry live time in second."
|
|
::= { hwL2mcQinQPortEntry 20 }
|
|
|
|
hwQinQPortFlag OBJECT-TYPE
|
|
SYNTAX Integer32(1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port flag:
|
|
1 static
|
|
2 dynamic
|
|
3 static and dynamic
|
|
4 invalid
|
|
"
|
|
::= { hwL2mcQinQPortEntry 21 }
|
|
|
|
--
|
|
-- The hwL2mcETrackingInfoTable group.
|
|
--
|
|
hwL2mcETrackingInfoInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 19 }
|
|
|
|
hwL2mcETrackingInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcETrackingInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the host explicit tracking."
|
|
::= { hwL2mcETrackingInfoInfo 1 }
|
|
|
|
hwL2mcETrackingInfoEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcETrackingInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the host explicit tracking."
|
|
INDEX { hwETrackInfoSlotIndex, hwETrackInfoVlanIndex, hwETrackInfoVsiName, hwETrackInfoGroupAddr, hwETrackInfoSourceAddr,
|
|
hwETrackInfoPortType, hwETrackInfoPortIfIndex, hwETrackInfoPortPeId, hwETrackInfoPortCeId,
|
|
hwETrackInfoPeerAddress, hwETrackInfoVcOrSiteId,hwETrackInfoBoardNum, hwETrackInfoReportAddr
|
|
}
|
|
::= { hwL2mcETrackingInfoTable 1 }
|
|
|
|
HWL2mcETrackingInfoEntry ::= SEQUENCE {
|
|
hwETrackInfoSlotIndex Integer32,
|
|
hwETrackInfoVlanIndex VlanIdOrAny,
|
|
hwETrackInfoVsiName DisplayString,
|
|
hwETrackInfoGroupAddr IpAddress,
|
|
hwETrackInfoSourceAddr IpAddress,
|
|
hwETrackInfoPortType HWPortType,
|
|
hwETrackInfoPortIfIndex InterfaceIndexOrZero,
|
|
hwETrackInfoPortPeId VlanIdOrAny,
|
|
hwETrackInfoPortCeId VlanIdOrAny,
|
|
hwETrackInfoPeerAddress IpAddress,
|
|
hwETrackInfoVcOrSiteId Unsigned32,
|
|
hwETrackInfoBoardNum Integer32,
|
|
hwETrackInfoReportAddr IpAddress,
|
|
hwETrackInfoFlag Integer32
|
|
}
|
|
|
|
hwETrackInfoSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot index, which is interface board number. "
|
|
::= { hwL2mcETrackingInfoEntry 1 }
|
|
|
|
hwETrackInfoVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN.
|
|
If a VSI is specified, the value is 4095. If both hwETrackInfoVlanIndex and hwETrackInfoVsiName are invalid, the configuration is global.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcETrackingInfoEntry 2 }
|
|
|
|
hwETrackInfoVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI.
|
|
If a VLAN is specified, the value is 32. If both hwETrackInfoVlanIndex and hwETrackInfoVsiName are invalid, the configuration is global."
|
|
::= { hwL2mcETrackingInfoEntry 3 }
|
|
|
|
hwETrackInfoGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcETrackingInfoEntry 4 }
|
|
|
|
hwETrackInfoSourceAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcETrackingInfoEntry 5 }
|
|
|
|
hwETrackInfoPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcETrackingInfoEntry 6 }
|
|
|
|
hwETrackInfoPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcETrackingInfoEntry 7 }
|
|
|
|
hwETrackInfoPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcETrackingInfoEntry 8 }
|
|
|
|
hwETrackInfoPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcETrackingInfoEntry 9 }
|
|
|
|
hwETrackInfoPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcETrackingInfoEntry 10 }
|
|
|
|
hwETrackInfoVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcETrackingInfoEntry 11 }
|
|
|
|
hwETrackInfoBoardNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface board number."
|
|
::= { hwL2mcETrackingInfoEntry 12 }
|
|
|
|
hwETrackInfoReportAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a user."
|
|
::= { hwL2mcETrackingInfoEntry 13 }
|
|
|
|
hwETrackInfoFlag OBJECT-TYPE
|
|
SYNTAX Integer32(1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port filter mode:
|
|
1 include
|
|
2 exclude
|
|
"
|
|
::= { hwL2mcETrackingInfoEntry 20 }
|
|
|
|
--
|
|
-- The hwL2mcSourceGroupTable group.
|
|
--
|
|
hwL2mcSourceGroupInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 22 }
|
|
|
|
hwL2mcSourceGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcSourceGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains VLAN or VSI performance statistics information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcSourceGroupInfo 1 }
|
|
|
|
hwL2mcSourceGroupEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcSourceGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device
|
|
and deleted when the VLAN or VSI becomes inactive."
|
|
INDEX { hwL2mcSourceGroupVlanIndex, hwL2mcSourceGroupVsiName,
|
|
hwL2mcSourceGroupGroupAddress, hwL2mcSourceGroupSourceAddress}
|
|
::= { hwL2mcSourceGroupTable 1 }
|
|
|
|
HWL2mcSourceGroupEntry ::= SEQUENCE {
|
|
hwL2mcSourceGroupVlanIndex VlanIdOrAny,
|
|
hwL2mcSourceGroupVsiName DisplayString,
|
|
hwL2mcSourceGroupGroupAddress IpAddress,
|
|
hwL2mcSourceGroupSourceAddress IpAddress,
|
|
hwL2mcSourceGroupStat Counter64
|
|
}
|
|
|
|
hwL2mcSourceGroupVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcSourceGroupEntry 1 }
|
|
|
|
hwL2mcSourceGroupVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcSourceGroupEntry 2 }
|
|
|
|
hwL2mcSourceGroupGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group.
|
|
In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcSourceGroupEntry 3 }
|
|
|
|
hwL2mcSourceGroupSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcSourceGroupEntry 4 }
|
|
|
|
hwL2mcSourceGroupStat OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the packet statistic of (S,G) group."
|
|
::= { hwL2mcSourceGroupEntry 10 }
|
|
|
|
--
|
|
-- The hwL2mcDTFwdInfo group.
|
|
--
|
|
hwL2mcDTFwdInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 23 }
|
|
|
|
hwL2mcDTFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcDTFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast forward information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcDTFwdInfo 1 }
|
|
|
|
hwL2mcDTFwdEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcDTFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
|
|
a forwarding table entry deleted."
|
|
INDEX { hwL2mcDTFwdSlotIndex, hwL2mcDTFwdVlanIndex, hwL2mcDTFwdVsiName, hwL2mcDTFwdGroupAddress, hwL2mcDTFwdSourceAddress, hwL2mcDTFwdPortType,
|
|
hwL2mcDTFwdPortIfIndex, hwL2mcDTFwdPortPeId, hwL2mcDTFwdPortCeId,
|
|
hwL2mcDTFwdPeerAddress, hwL2mcDTFwdVcOrSiteId, hwL2mcDTFwdBoardNum }
|
|
::= { hwL2mcDTFwdTable 1 }
|
|
|
|
HWL2mcDTFwdEntry ::= SEQUENCE {
|
|
hwL2mcDTFwdSlotIndex Integer32,
|
|
hwL2mcDTFwdVlanIndex VlanIdOrAny,
|
|
hwL2mcDTFwdVsiName DisplayString,
|
|
hwL2mcDTFwdGroupAddress IpAddress,
|
|
hwL2mcDTFwdSourceAddress IpAddress,
|
|
hwL2mcDTFwdPortType HWPortType,
|
|
hwL2mcDTFwdPortIfIndex InterfaceIndexOrZero,
|
|
hwL2mcDTFwdPortPeId VlanIdOrAny,
|
|
hwL2mcDTFwdPortCeId VlanIdOrAny,
|
|
hwL2mcDTFwdPeerAddress IpAddress,
|
|
hwL2mcDTFwdVcOrSiteId Unsigned32,
|
|
hwL2mcDTFwdBoardNum Integer32,
|
|
hwL2mcDTFwdAddressType INTEGER,
|
|
hwL2mcDTFwdHostFlag1 INTEGER,
|
|
hwL2mcDTFwdHostFlag2 INTEGER,
|
|
hwL2mcDTFwdHostFlag3 INTEGER,
|
|
hwL2mcDTFwdHostFlag4 INTEGER
|
|
}
|
|
|
|
hwL2mcDTFwdSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot index, which is interface board number. "
|
|
::= { hwL2mcDTFwdEntry 1 }
|
|
|
|
hwL2mcDTFwdVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcDTFwdEntry 2 }
|
|
|
|
hwL2mcDTFwdVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcDTFwdEntry 3 }
|
|
|
|
hwL2mcDTFwdGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcDTFwdEntry 4 }
|
|
|
|
hwL2mcDTFwdSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcDTFwdEntry 5 }
|
|
|
|
hwL2mcDTFwdPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcDTFwdEntry 6 }
|
|
|
|
hwL2mcDTFwdPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcDTFwdEntry 7 }
|
|
|
|
hwL2mcDTFwdPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcDTFwdEntry 8 }
|
|
|
|
hwL2mcDTFwdPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcDTFwdEntry 9 }
|
|
|
|
hwL2mcDTFwdPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcDTFwdEntry 10 }
|
|
|
|
hwL2mcDTFwdVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcDTFwdEntry 11 }
|
|
|
|
hwL2mcDTFwdBoardNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface board number."
|
|
::= { hwL2mcDTFwdEntry 12 }
|
|
|
|
hwL2mcDTFwdAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ip(1),
|
|
mac(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of an entry:
|
|
1: IP
|
|
2: MAC
|
|
The default value is 1.
|
|
"
|
|
::= { hwL2mcDTFwdEntry 21 }
|
|
|
|
hwL2mcDTFwdHostFlag1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2),
|
|
staticDynamic(3),
|
|
invalid(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode to create an interface on the host:
|
|
1: static
|
|
2: dynamic
|
|
3: static and dynamic
|
|
4: invalid
|
|
"
|
|
::= { hwL2mcDTFwdEntry 22 }
|
|
|
|
hwL2mcDTFwdHostFlag2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nonMapping(1),
|
|
mapping(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether an interface on the host is created through SSM-mapping:
|
|
1: non-mapping
|
|
2: mapping
|
|
"
|
|
::= { hwL2mcDTFwdEntry 23 }
|
|
|
|
hwL2mcDTFwdHostFlag3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
host(1),
|
|
router(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of an interface created on a router:
|
|
1: Interface connected to the host
|
|
2: Router interface that replicates multicast data flows
|
|
"
|
|
::= { hwL2mcDTFwdEntry 24 }
|
|
|
|
hwL2mcDTFwdHostFlag4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
port(1),
|
|
static(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates (S, G) table created :
|
|
1: from port;
|
|
2: from static;
|
|
3: from both
|
|
the default falue is 1
|
|
"
|
|
::= { hwL2mcDTFwdEntry 25 }
|
|
|
|
|
|
--
|
|
-- The hwDTGroupInfo group.
|
|
--
|
|
hwL2mcDTGroupInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 24 }
|
|
|
|
hwL2mcDTGroupInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcDTGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast group information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcDTGroupInfo 1 }
|
|
|
|
hwL2mcDTGroupInfoEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcDTGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
|
|
a forwarding table entry deleted."
|
|
INDEX { hwL2mcDTGroupSlotIndex, hwL2mcDTGroupVlanIndex, hwL2mcDTGroupVsiName, hwL2mcDTGroupGroupAddress, hwL2mcDTGroupSourceAddress,
|
|
hwL2mcDTGroupFilterFlag, hwL2mcDTPortType, hwL2mcDTGroupPortIfIndex, hwL2mcDTGroupPortPeId,
|
|
hwL2mcDTGroupPortCeId, hwL2mcDTGroupPeerAddress, hwL2mcDTGroupVcOrSiteId, hwL2mcDTGroupBoardNum }
|
|
::= { hwL2mcDTGroupInfoTable 1 }
|
|
|
|
HWL2mcDTGroupInfoEntry ::= SEQUENCE {
|
|
hwL2mcDTGroupSlotIndex Integer32,
|
|
hwL2mcDTGroupVlanIndex VlanIdOrAny,
|
|
hwL2mcDTGroupVsiName DisplayString,
|
|
hwL2mcDTGroupGroupAddress IpAddress,
|
|
hwL2mcDTGroupSourceAddress IpAddress,
|
|
hwL2mcDTGroupFilterFlag INTEGER,
|
|
hwL2mcDTPortType HWPortType,
|
|
hwL2mcDTGroupPortIfIndex InterfaceIndexOrZero,
|
|
hwL2mcDTGroupPortPeId VlanIdOrAny,
|
|
hwL2mcDTGroupPortCeId VlanIdOrAny,
|
|
hwL2mcDTGroupPeerAddress IpAddress,
|
|
hwL2mcDTGroupVcOrSiteId Unsigned32,
|
|
hwL2mcDTGroupBoardNum Integer32,
|
|
hwL2mcDTSourceUpTime Counter32,
|
|
hwL2mcDTSourceExpires Counter32,
|
|
hwL2mcDTGroupUpTime Counter32,
|
|
hwL2mcDTGroupExpires Counter32,
|
|
hwL2mcDTGroupHostFlag1 INTEGER,
|
|
hwL2mcDTGroupHostFlag2 INTEGER,
|
|
hwL2mcDTGroupRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcDTGroupSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot index, which is interface board number. "
|
|
::= { hwL2mcDTGroupInfoEntry 1 }
|
|
|
|
hwL2mcDTGroupVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 2 }
|
|
|
|
hwL2mcDTGroupVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcDTGroupInfoEntry 3 }
|
|
|
|
hwL2mcDTGroupGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of a multicast group."
|
|
::= { hwL2mcDTGroupInfoEntry 4 }
|
|
|
|
hwL2mcDTGroupSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcDTGroupInfoEntry 5 }
|
|
|
|
hwL2mcDTGroupFilterFlag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
include(1),
|
|
exclude(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filtering mode:
|
|
1: include
|
|
2: exclude
|
|
3: invalid
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 6 }
|
|
|
|
hwL2mcDTPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 7 }
|
|
|
|
hwL2mcDTGroupPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcDTGroupInfoEntry 8 }
|
|
|
|
hwL2mcDTGroupPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 9 }
|
|
|
|
hwL2mcDTGroupPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 10 }
|
|
|
|
hwL2mcDTGroupPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcDTGroupInfoEntry 11 }
|
|
|
|
hwL2mcDTGroupVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcDTGroupInfoEntry 12 }
|
|
|
|
hwL2mcDTGroupBoardNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface board number."
|
|
::= { hwL2mcDTGroupInfoEntry 13 }
|
|
|
|
hwL2mcDTSourceUpTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How long the source group exists in the forwarding entry."
|
|
::= { hwL2mcDTGroupInfoEntry 21 }
|
|
|
|
hwL2mcDTSourceExpires OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period of the source group in the forwarding entry, that is, the aging time of the source group."
|
|
::= { hwL2mcDTGroupInfoEntry 22 }
|
|
|
|
hwL2mcDTGroupUpTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How long the group exists in the forwarding entry."
|
|
::= { hwL2mcDTGroupInfoEntry 23 }
|
|
|
|
hwL2mcDTGroupExpires OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the group expires in the forwarding entry, that is, the aging time of the source group."
|
|
::= { hwL2mcDTGroupInfoEntry 24 }
|
|
|
|
|
|
|
|
hwL2mcDTGroupHostFlag1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2),
|
|
staticDynamic(3),
|
|
invalid(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode to create an interface on the host:
|
|
1: static
|
|
2: dynamic
|
|
3: static and dynamic
|
|
4: invalid
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 26 }
|
|
|
|
hwL2mcDTGroupHostFlag2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nonMapping(1),
|
|
mapping(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether an interface on the host is created through SSM-mapping:
|
|
1: non-mapping
|
|
2: mapping
|
|
"
|
|
::= { hwL2mcDTGroupInfoEntry 27 }
|
|
|
|
hwL2mcDTGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcDTGroupInfoEntry 100 }
|
|
|
|
--
|
|
-- The hwL2mcMulticastTrafficPolicyCfgInfo group.
|
|
--
|
|
hwL2mcMulticastTrafficPolicyCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 25 }
|
|
|
|
hwL2mcMulticastTrafficPolicyCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcMulticastTrafficPolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In this table, you can query or configure whether to disable receive multicast traffic on a port."
|
|
::= { hwL2mcMulticastTrafficPolicyCfgInfo 1 }
|
|
|
|
hwL2mcMulticastTrafficPolicyCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcMulticastTrafficPolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device when disable receive multicast traffic on a port."
|
|
INDEX { hwMulticastTrafficPolicyPortType, hwMulticastTrafficPolicyPortIfIndex, hwMulticastTrafficPolicyPortPeId, hwMulticastTrafficPolicyPortCeId,
|
|
hwMulticastTrafficPolicyPortEndCeId,
|
|
hwMulticastTrafficPolicyPeerAddress, hwMulticastTrafficPolicyVcOrSiteId,hwMulticastTrafficPolicyVlanIndex, hwMulticastTrafficPolicyVsiName,
|
|
hwMulticastTrafficPolicyEndVlanIndex
|
|
}
|
|
::= { hwL2mcMulticastTrafficPolicyCfgTable 1 }
|
|
|
|
HWL2mcMulticastTrafficPolicyCfgEntry ::= SEQUENCE {
|
|
hwMulticastTrafficPolicyPortType HWPortType,
|
|
hwMulticastTrafficPolicyPortIfIndex InterfaceIndexOrZero,
|
|
hwMulticastTrafficPolicyPortPeId VlanIdOrAny,
|
|
hwMulticastTrafficPolicyPortCeId VlanIdOrAny,
|
|
hwMulticastTrafficPolicyPortEndCeId VlanIdOrAny,
|
|
hwMulticastTrafficPolicyPeerAddress IpAddress,
|
|
hwMulticastTrafficPolicyVcOrSiteId Unsigned32,
|
|
hwMulticastTrafficPolicyVlanIndex VlanIdOrAny,
|
|
hwMulticastTrafficPolicyEndVlanIndex VlanIdOrAny,
|
|
hwMulticastTrafficPolicyVsiName DisplayString,
|
|
hwMulticastTrafficPolicyRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwMulticastTrafficPolicyPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 1 }
|
|
|
|
hwMulticastTrafficPolicyPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 2 }
|
|
|
|
hwMulticastTrafficPolicyPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 3 }
|
|
|
|
hwMulticastTrafficPolicyPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 4 }
|
|
|
|
hwMulticastTrafficPolicyPortEndCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 5 }
|
|
|
|
hwMulticastTrafficPolicyPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 6 }
|
|
|
|
hwMulticastTrafficPolicyVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 7 }
|
|
|
|
hwMulticastTrafficPolicyVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 8 }
|
|
|
|
hwMulticastTrafficPolicyEndVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 9 }
|
|
|
|
hwMulticastTrafficPolicyVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 10 }
|
|
|
|
hwMulticastTrafficPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcMulticastTrafficPolicyCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcRouteLearnDisablePolicyCfgInfo group.
|
|
--
|
|
hwL2mcRouteLearnDisablePolicyCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 26 }
|
|
|
|
hwL2mcRouteLearnDisablePolicyCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcRouteLearnDisablePolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In this table, you can query or configure whether to disable router port learning on a port."
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgInfo 1 }
|
|
|
|
hwL2mcRouteLearnDisablePolicyCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcRouteLearnDisablePolicyCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device when disable router port learning on a port."
|
|
INDEX { hwRouteLearnDisablePolicyPortType, hwRouteLearnDisablePolicyPortIfIndex, hwRouteLearnDisablePolicyPortPeId, hwRouteLearnDisablePolicyPortCeId,
|
|
hwRouteLearnDisablePolicyPortEndCeId, hwRouteLearnDisablePolicyPeerAddress, hwRouteLearnDisablePolicyVcOrSiteId,hwRouteLearnDisablePolicyVlanIndex,
|
|
hwRouteLearnDisablePolicyEndVlanIndex, hwRouteLearnDisablePolicyVsiName
|
|
}
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgTable 1 }
|
|
|
|
HWL2mcRouteLearnDisablePolicyCfgEntry ::= SEQUENCE {
|
|
hwRouteLearnDisablePolicyPortType HWPortType,
|
|
hwRouteLearnDisablePolicyPortIfIndex InterfaceIndexOrZero,
|
|
hwRouteLearnDisablePolicyPortPeId VlanIdOrAny,
|
|
hwRouteLearnDisablePolicyPortCeId VlanIdOrAny,
|
|
hwRouteLearnDisablePolicyPortEndCeId VlanIdOrAny,
|
|
hwRouteLearnDisablePolicyPeerAddress IpAddress,
|
|
hwRouteLearnDisablePolicyVcOrSiteId Unsigned32,
|
|
hwRouteLearnDisablePolicyVlanIndex VlanIdOrAny,
|
|
hwRouteLearnDisablePolicyEndVlanIndex VlanIdOrAny,
|
|
hwRouteLearnDisablePolicyVsiName DisplayString,
|
|
hwRouteLearnDisablePolicyRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwRouteLearnDisablePolicyPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 1 }
|
|
|
|
hwRouteLearnDisablePolicyPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 2 }
|
|
|
|
hwRouteLearnDisablePolicyPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 3 }
|
|
|
|
hwRouteLearnDisablePolicyPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 4 }
|
|
|
|
hwRouteLearnDisablePolicyPortEndCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 5 }
|
|
|
|
hwRouteLearnDisablePolicyPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 6 }
|
|
|
|
hwRouteLearnDisablePolicyVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 7 }
|
|
|
|
hwRouteLearnDisablePolicyVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 8 }
|
|
|
|
hwRouteLearnDisablePolicyEndVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 9 }
|
|
|
|
hwRouteLearnDisablePolicyVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 10 }
|
|
|
|
hwRouteLearnDisablePolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcRouteLearnDisablePolicyCfgEntry 100 }
|
|
|
|
|
|
|
|
--
|
|
-- The hwL2mcTrackVRRPCfgInfo group.
|
|
--
|
|
hwL2mcTrackVRRPCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 27 }
|
|
|
|
hwL2mcTrackVRRPCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcTrackVRRPCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In this table, you can query or configure a port to track VRRP."
|
|
::= { hwL2mcTrackVRRPCfgInfo 1 }
|
|
|
|
hwL2mcTrackVRRPCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcTrackVRRPCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device when configure a port to track VRRP."
|
|
INDEX { hwTrackVRRPPortType, hwTrackVRRPPortIfIndex, hwTrackVRRPPortPeId, hwTrackVRRPPortCeId,
|
|
hwTrackVRRPPortEndCeId, hwTrackVRRPVlanIndex, hwTrackVRRPEndVlanIndex, hwTrackVRRPVsiName
|
|
}
|
|
::= { hwL2mcTrackVRRPCfgTable 1 }
|
|
|
|
HWL2mcTrackVRRPCfgEntry ::= SEQUENCE {
|
|
hwTrackVRRPPortType HWPortType,
|
|
hwTrackVRRPPortIfIndex InterfaceIndexOrZero,
|
|
hwTrackVRRPPortPeId VlanIdOrAny,
|
|
hwTrackVRRPPortCeId VlanIdOrAny,
|
|
hwTrackVRRPPortEndCeId VlanIdOrAny,
|
|
hwTrackVRRPVlanIndex VlanIdOrAny,
|
|
hwTrackVRRPEndVlanIndex VlanIdOrAny,
|
|
hwTrackVRRPVsiName DisplayString,
|
|
hwTrackVRRPVridIfIndex InterfaceIndexOrZero,
|
|
hwTrackVRRPVridID Unsigned32,
|
|
hwTrackVRRPRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwTrackVRRPPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcTrackVRRPCfgEntry 1 }
|
|
|
|
hwTrackVRRPPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcTrackVRRPCfgEntry 2 }
|
|
|
|
hwTrackVRRPPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcTrackVRRPCfgEntry 3 }
|
|
|
|
hwTrackVRRPPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcTrackVRRPCfgEntry 4 }
|
|
|
|
hwTrackVRRPPortEndCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcTrackVRRPCfgEntry 5 }
|
|
|
|
hwTrackVRRPVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcTrackVRRPCfgEntry 6 }
|
|
|
|
hwTrackVRRPEndVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcTrackVRRPCfgEntry 7 }
|
|
|
|
hwTrackVRRPVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcTrackVRRPCfgEntry 8 }
|
|
|
|
hwTrackVRRPVridIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcTrackVRRPCfgEntry 9 }
|
|
|
|
hwTrackVRRPVridID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP VRID."
|
|
::= { hwL2mcTrackVRRPCfgEntry 10 }
|
|
|
|
hwTrackVRRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcTrackVRRPCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcMInstCfgInfo group.
|
|
--
|
|
hwL2mcMInstCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 28 }
|
|
|
|
hwL2mcMInstCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcMInstCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table create or modified multicast Instance."
|
|
::= { hwL2mcMInstCfgInfo 1 }
|
|
|
|
hwL2mcMInstCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcMInstCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of multicast-instance is created in the device."
|
|
INDEX { hwL2mcMInstId
|
|
}
|
|
::= { hwL2mcMInstCfgTable 1 }
|
|
|
|
HWL2mcMInstCfgEntry ::= SEQUENCE {
|
|
hwL2mcMInstId Unsigned32,
|
|
hwL2mcMInstVlanIndex VlanIdOrAnyOrNone,
|
|
hwL2mcMInstVsiName DisplayString,
|
|
hwL2mcMInstProtectInst Unsigned32,
|
|
hwL2mcMInstRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcMInstId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L2 multicast instance ID"
|
|
::= { hwL2mcMInstCfgEntry 1 }
|
|
|
|
hwL2mcMInstVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast-VLAN ID"
|
|
::= { hwL2mcMInstCfgEntry 2 }
|
|
|
|
hwL2mcMInstVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast-VSI name"
|
|
::= { hwL2mcMInstCfgEntry 3 }
|
|
|
|
hwL2mcMInstProtectInst OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..32)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L2 multicast protect instance ID"
|
|
::= { hwL2mcMInstCfgEntry 4 }
|
|
|
|
hwL2mcMInstRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcMInstCfgEntry 100 }
|
|
|
|
|
|
hwL2mcMInstGroupCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcMInstGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Thist table configure multicast instance mulitcast group infomation."
|
|
::= { hwL2mcMInstCfgInfo 2 }
|
|
|
|
hwL2mcMInstGroupCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcMInstGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of multicast-instance channel-group is created in the device."
|
|
INDEX { hwL2mcMInstGroupId, hwL2mcMInstGroupAddress, hwL2mcMinstGroupAddressMask
|
|
}
|
|
::= { hwL2mcMInstGroupCfgTable 1 }
|
|
|
|
HWL2mcMInstGroupCfgEntry ::= SEQUENCE {
|
|
hwL2mcMInstGroupId Unsigned32,
|
|
hwL2mcMInstGroupAddress IpAddress,
|
|
hwL2mcMinstGroupAddressMask IpAddress,
|
|
hwL2mcMInstGroupRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcMInstGroupId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L2 multicast instance ID"
|
|
::= { hwL2mcMInstGroupCfgEntry 1 }
|
|
|
|
hwL2mcMInstGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group address."
|
|
::= { hwL2mcMInstGroupCfgEntry 2 }
|
|
|
|
hwL2mcMinstGroupAddressMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group address."
|
|
::= { hwL2mcMInstGroupCfgEntry 3 }
|
|
|
|
hwL2mcMInstGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcMInstGroupCfgEntry 100 }
|
|
|
|
|
|
hwL2mcMInstUserCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcMInstUserCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User instance in the multicast instance."
|
|
::= { hwL2mcMInstCfgInfo 3 }
|
|
|
|
hwL2mcMInstUserCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcMInstUserCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of user-instance is created in the device."
|
|
INDEX { hwL2mcMInstUserMInstId, hwL2mcMInstUserVLANID, hwL2mcMInstUserEndVLANID, hwL2mcMInstUserVSIName
|
|
}
|
|
::= { hwL2mcMInstUserCfgTable 1 }
|
|
|
|
HWL2mcMInstUserCfgEntry ::= SEQUENCE {
|
|
hwL2mcMInstUserMInstId Unsigned32,
|
|
hwL2mcMInstUserVLANID VlanIdOrAnyOrNone,
|
|
hwL2mcMInstUserEndVLANID VlanIdOrAnyOrNone,
|
|
hwL2mcMInstUserVSIName DisplayString,
|
|
hwL2mcMInstUserRowStatus RowStatus
|
|
}
|
|
|
|
hwL2mcMInstUserMInstId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L2 multicast instance ID"
|
|
::= { hwL2mcMInstUserCfgEntry 1 }
|
|
|
|
hwL2mcMInstUserVLANID OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User VLAN ID."
|
|
::= { hwL2mcMInstUserCfgEntry 2 }
|
|
|
|
hwL2mcMInstUserEndVLANID OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User End VLAN ID."
|
|
::= { hwL2mcMInstUserCfgEntry 3 }
|
|
|
|
hwL2mcMInstUserVSIName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VSI name."
|
|
::= { hwL2mcMInstUserCfgEntry 4 }
|
|
|
|
hwL2mcMInstUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcMInstUserCfgEntry 100 }
|
|
|
|
--
|
|
-- The hwL2mcStaticGroupCfgInfo group.
|
|
--
|
|
hwL2mcStaticGroupCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 29 }
|
|
|
|
hwL2mcStaticGroupCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcStaticGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains l2 multicast static group information
|
|
for IGMP Snooping."
|
|
::= { hwL2mcStaticGroupCfgInfo 1 }
|
|
|
|
hwL2mcStaticGroupCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcStaticGroupCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device create a static group entry and delete when
|
|
a static group entry deleted."
|
|
INDEX { hwStaticGroupCfgPortType, hwStaticGroupCfgPortIfIndex, hwStaticGroupCfgPortPeId, hwStaticGroupCfgPortPeIdEnd, hwStaticGroupCfgPortCeId,
|
|
hwStaticGroupCfgPortCeIdEnd, hwStaticGroupCfgPeerAddress, hwStaticGroupCfgVcOrSiteId, hwStaticGroupCfgVlanIndex, hwStaticGroupCfgVsiName,
|
|
hwStaticGroupCfgGroupAddress, hwStaticGroupCfgSourceAddress }
|
|
::= { hwL2mcStaticGroupCfgTable 1 }
|
|
|
|
HWL2mcStaticGroupCfgEntry ::= SEQUENCE {
|
|
hwStaticGroupCfgPortType HWPortType,
|
|
hwStaticGroupCfgPortIfIndex InterfaceIndexOrZero,
|
|
hwStaticGroupCfgPortPeId VlanIdOrAny,
|
|
hwStaticGroupCfgPortPeIdEnd VlanIdOrAny,
|
|
hwStaticGroupCfgPortCeId VlanIdOrAny,
|
|
hwStaticGroupCfgPortCeIdEnd VlanIdOrAny,
|
|
hwStaticGroupCfgPeerAddress IpAddress,
|
|
hwStaticGroupCfgVcOrSiteId Unsigned32,
|
|
hwStaticGroupCfgVlanIndex VlanIdOrAny,
|
|
hwStaticGroupCfgVsiName DisplayString,
|
|
hwStaticGroupCfgGroupAddress IpAddress,
|
|
hwStaticGroupCfgSourceAddress IpAddress,
|
|
hwStaticGroupCfgRowStatus RowStatus
|
|
}
|
|
|
|
hwStaticGroupCfgPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcStaticGroupCfgEntry 1 }
|
|
|
|
hwStaticGroupCfgPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcStaticGroupCfgEntry 2 }
|
|
|
|
hwStaticGroupCfgPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcStaticGroupCfgEntry 3 }
|
|
|
|
hwStaticGroupCfgPortPeIdEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcStaticGroupCfgEntry 4 }
|
|
|
|
hwStaticGroupCfgPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 0 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcStaticGroupCfgEntry 5 }
|
|
|
|
hwStaticGroupCfgPortCeIdEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 0 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcStaticGroupCfgEntry 6 }
|
|
|
|
hwStaticGroupCfgPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcStaticGroupCfgEntry 7 }
|
|
|
|
hwStaticGroupCfgVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcStaticGroupCfgEntry 8 }
|
|
|
|
hwStaticGroupCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcStaticGroupCfgEntry 9 }
|
|
|
|
hwStaticGroupCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcStaticGroupCfgEntry 10 }
|
|
|
|
hwStaticGroupCfgGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
|
|
::= { hwL2mcStaticGroupCfgEntry 11 }
|
|
|
|
hwStaticGroupCfgSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of a multicast group."
|
|
::= { hwL2mcStaticGroupCfgEntry 12 }
|
|
|
|
hwStaticGroupCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcStaticGroupCfgEntry 100 }
|
|
|
|
--
|
|
-- The hwL2mcPortGroupPolicyBatchCfgInfo group.
|
|
--
|
|
hwL2mcPortGroupPolicyBatchCfgInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 30 }
|
|
|
|
hwL2mcPortGroupPolicyBatchCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcPortGroupPolicyBatchCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In this table, you can query or configure a group policy to filter entries on a port."
|
|
::= { hwL2mcPortGroupPolicyBatchCfgInfo 1 }
|
|
|
|
hwL2mcPortGroupPolicyBatchCfgEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcPortGroupPolicyBatchCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each active VLAN or VSI in the device when a group policy added."
|
|
INDEX { hwPortGroupPolicyCfgPortType, hwPortGroupPolicyCfgPortIfIndex, hwPortGroupPolicyCfgPortPeId, hwPortGroupPolicyCfgPortPeIdEnd,
|
|
hwPortGroupPolicyCfgPortCeId, hwPortGroupPolicyCfgPortCeIdEnd, hwPortGroupPolicyCfgPeerAddress, hwPortGroupPolicyCfgVcOrSiteId,
|
|
hwPortGroupPolicyCfgVlanIndex, hwPortGroupPolicyCfgVsiName
|
|
}
|
|
::= { hwL2mcPortGroupPolicyBatchCfgTable 1 }
|
|
|
|
HWL2mcPortGroupPolicyBatchCfgEntry ::= SEQUENCE {
|
|
hwPortGroupPolicyCfgPortType HWPortType,
|
|
hwPortGroupPolicyCfgPortIfIndex InterfaceIndexOrZero,
|
|
hwPortGroupPolicyCfgPortPeId VlanIdOrAny,
|
|
hwPortGroupPolicyCfgPortPeIdEnd VlanIdOrAny,
|
|
hwPortGroupPolicyCfgPortCeId VlanIdOrAny,
|
|
hwPortGroupPolicyCfgPortCeIdEnd VlanIdOrAny,
|
|
hwPortGroupPolicyCfgPeerAddress IpAddress,
|
|
hwPortGroupPolicyCfgVcOrSiteId Unsigned32,
|
|
hwPortGroupPolicyCfgVlanIndex VlanIdOrAny,
|
|
hwPortGroupPolicyCfgVsiName DisplayString,
|
|
hwPortGroupPolicyCfgAclNum Integer32,
|
|
hwPortGroupPolicyCfgIgmpVersion INTEGER,
|
|
hwPortGroupPolicyCfgRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwPortGroupPolicyCfgPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 1 }
|
|
|
|
hwPortGroupPolicyCfgPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 2 }
|
|
|
|
hwPortGroupPolicyCfgPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 3 }
|
|
|
|
hwPortGroupPolicyCfgPortPeIdEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 4 }
|
|
|
|
hwPortGroupPolicyCfgPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 5 }
|
|
|
|
hwPortGroupPolicyCfgPortCeIdEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 6 }
|
|
|
|
hwPortGroupPolicyCfgPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 7 }
|
|
|
|
hwPortGroupPolicyCfgVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 8 }
|
|
|
|
hwPortGroupPolicyCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 9 }
|
|
|
|
hwPortGroupPolicyCfgVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 10 }
|
|
|
|
hwPortGroupPolicyCfgAclNum OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of a basic ACL.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that the value is invalid.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 11 }
|
|
|
|
hwPortGroupPolicyCfgIgmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
versionAll(0),
|
|
version1(1),
|
|
version2(2),
|
|
version3(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP version.
|
|
The value ranges from 0 to 3.
|
|
The default is 0, indicating that no version is specified.
|
|
"
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 12 }
|
|
|
|
hwPortGroupPolicyCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcPortGroupPolicyBatchCfgEntry 100 }
|
|
|
|
|
|
--
|
|
-- The hwL2mcCACPortLimitInfo group.
|
|
--
|
|
hwL2mcCACPortLimitInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 31 }
|
|
|
|
hwL2mcCACPortLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcCACPortLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of IGMP snooping CAC on an interface."
|
|
::= { hwL2mcCACPortLimitInfo 1 }
|
|
|
|
hwL2mcCACPortLimitEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcCACPortLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping CAC on an interface."
|
|
INDEX { hwCACPortLimitVlanIndex, hwCACPortLimitVsiName, hwCACPortLimitPortType,
|
|
hwCACPortLimitIfIndex, hwCACPortLimitPeId, hwCACPortLimitPeIdEnd, hwCACPortLimitCeId, hwCACPortLimitCeIdEnd,
|
|
hwCACPortLimitPeerAddress, hwCACPortLimitVcOrSiteId, hwCACPortLimitChnlName }
|
|
::= { hwL2mcCACPortLimitTable 1 }
|
|
|
|
HWL2mcCACPortLimitEntry ::= SEQUENCE {
|
|
hwCACPortLimitVlanIndex VlanIdOrAny,
|
|
hwCACPortLimitVsiName DisplayString,
|
|
hwCACPortLimitPortType HWPortType,
|
|
hwCACPortLimitIfIndex InterfaceIndexOrZero,
|
|
hwCACPortLimitPeId VlanIdOrAny,
|
|
hwCACPortLimitPeIdEnd VlanIdOrAny,
|
|
hwCACPortLimitCeId VlanIdOrAny,
|
|
hwCACPortLimitCeIdEnd VlanIdOrAny,
|
|
hwCACPortLimitPeerAddress IpAddress,
|
|
hwCACPortLimitVcOrSiteId Unsigned32,
|
|
hwCACPortLimitChnlName DisplayString,
|
|
hwCACPortLimitAcl Integer32,
|
|
hwCACPortLimitMaxEntry Integer32,
|
|
hwCACPortLimitEntryCnt Counter32,
|
|
hwCACPortLimitMaxBandWidth Integer32,
|
|
hwCACPortLimitBandWidth Counter32,
|
|
hwCACPortLimitCfgRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwCACPortLimitVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095.
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 1 }
|
|
|
|
hwCACPortLimitVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcCACPortLimitEntry 2 }
|
|
|
|
hwCACPortLimitPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
11: Main-interface-bound-to-vsi
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 3 }
|
|
|
|
hwCACPortLimitIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcCACPortLimitEntry 4 }
|
|
|
|
hwCACPortLimitPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 5 }
|
|
hwCACPortLimitPeIdEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 6 }
|
|
|
|
hwCACPortLimitCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 7 }
|
|
|
|
hwCACPortLimitCeIdEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 8 }
|
|
|
|
hwCACPortLimitPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcCACPortLimitEntry 9 }
|
|
|
|
hwCACPortLimitVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcCACPortLimitEntry 10 }
|
|
|
|
hwCACPortLimitChnlName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel name."
|
|
::= { hwL2mcCACPortLimitEntry 11 }
|
|
|
|
hwCACPortLimitAcl OBJECT-TYPE
|
|
SYNTAX Integer32(0|2000..3999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ACL for the multicast groups that do not need to be configured with CAC limit.
|
|
The ACL number ranges from 2000 to 3999.
|
|
The default value is 0, indicating that the number is invalid.
|
|
"
|
|
::= { hwL2mcCACPortLimitEntry 12 }
|
|
|
|
hwCACPortLimitMaxEntry OBJECT-TYPE
|
|
SYNTAX Integer32(0..8000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of forwarding entries. The value 0 indicates that the number is invalid."
|
|
::= { hwL2mcCACPortLimitEntry 13 }
|
|
|
|
hwCACPortLimitEntryCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of current forwarding entries."
|
|
::= { hwL2mcCACPortLimitEntry 14 }
|
|
|
|
hwCACPortLimitMaxBandWidth OBJECT-TYPE
|
|
SYNTAX Integer32(0..4194304)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum bandwidth. The value 0 indicates that the bandwidth is invalid."
|
|
::= { hwL2mcCACPortLimitEntry 15 }
|
|
|
|
hwCACPortLimitBandWidth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current bandwidth."
|
|
::= { hwL2mcCACPortLimitEntry 16 }
|
|
|
|
hwCACPortLimitCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcCACPortLimitEntry 100 }
|
|
|
|
--
|
|
-- The hwL2mcQinqGroupSourceLimitInfo group.
|
|
--
|
|
hwL2mcQinqGroupSourceLimitInfo
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 32 }
|
|
|
|
hwL2mcQinqGroupLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcQinqGroupLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of IGMP snooping group limit on a QinQ interface."
|
|
::= { hwL2mcQinqGroupSourceLimitInfo 1 }
|
|
|
|
hwL2mcQinqGroupLimitEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcQinqGroupLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping group limit on a QinQ interface."
|
|
INDEX { hwL2mcQinqGroupLimitPortType, hwL2mcQinqGroupLimitIfIndex, hwL2mcQinqGroupLimitPeVid,
|
|
hwL2mcQinqGroupLimitPeVidEnd, hwL2mcQinqGroupLimitCeVid, hwL2mcQinqGroupLimitCeVidEnd }
|
|
::= { hwL2mcQinqGroupLimitTable 1 }
|
|
|
|
HWL2mcQinqGroupLimitEntry ::= SEQUENCE {
|
|
hwL2mcQinqGroupLimitPortType HWPortType,
|
|
hwL2mcQinqGroupLimitIfIndex InterfaceIndexOrZero,
|
|
hwL2mcQinqGroupLimitPeVid VlanIdOrAny,
|
|
hwL2mcQinqGroupLimitPeVidEnd VlanIdOrAny,
|
|
hwL2mcQinqGroupLimitCeVid VlanIdOrAny,
|
|
hwL2mcQinqGroupLimitCeVidEnd VlanIdOrAny,
|
|
hwL2mcQinqGroupLimitNum Unsigned32,
|
|
hwL2mcQinqGroupLimitRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwL2mcQinqGroupLimitPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
5: Termination sub-interface
|
|
"
|
|
::= { hwL2mcQinqGroupLimitEntry 1 }
|
|
|
|
hwL2mcQinqGroupLimitIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcQinqGroupLimitEntry 2 }
|
|
|
|
hwL2mcQinqGroupLimitPeVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqGroupLimitEntry 3 }
|
|
|
|
hwL2mcQinqGroupLimitPeVidEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqGroupLimitEntry 4 }
|
|
|
|
hwL2mcQinqGroupLimitCeVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqGroupLimitEntry 5 }
|
|
|
|
hwL2mcQinqGroupLimitCeVidEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqGroupLimitEntry 6 }
|
|
|
|
hwL2mcQinqGroupLimitNum OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group limit number of a QinQ interface."
|
|
::= { hwL2mcQinqGroupLimitEntry 10 }
|
|
|
|
hwL2mcQinqGroupLimitRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcQinqGroupLimitEntry 100 }
|
|
|
|
hwL2mcQinqSourceLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWL2mcQinqSourceLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configurations of IGMP snooping source limit on a QinQ interface."
|
|
::= { hwL2mcQinqGroupSourceLimitInfo 2 }
|
|
|
|
hwL2mcQinqSourceLimitEntry OBJECT-TYPE
|
|
SYNTAX HWL2mcQinqSourceLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created for each IGMP snooping source limit on a QinQ interface."
|
|
INDEX { hwL2mcQinqSourceLimitPortType, hwL2mcQinqSourceLimitIfIndex, hwL2mcQinqSourceLimitPeVid,
|
|
hwL2mcQinqSourceLimitPeVidEnd, hwL2mcQinqSourceLimitCeVid, hwL2mcQinqSourceLimitCeVidEnd }
|
|
::= { hwL2mcQinqSourceLimitTable 1 }
|
|
|
|
HWL2mcQinqSourceLimitEntry ::= SEQUENCE {
|
|
hwL2mcQinqSourceLimitPortType HWPortType,
|
|
hwL2mcQinqSourceLimitIfIndex InterfaceIndexOrZero,
|
|
hwL2mcQinqSourceLimitPeVid VlanIdOrAny,
|
|
hwL2mcQinqSourceLimitPeVidEnd VlanIdOrAny,
|
|
hwL2mcQinqSourceLimitCeVid VlanIdOrAny,
|
|
hwL2mcQinqSourceLimitCeVidEnd VlanIdOrAny,
|
|
hwL2mcQinqSourceLimitNum Unsigned32,
|
|
hwL2mcQinqSourceLimitRowStatus RowStatus
|
|
}
|
|
|
|
|
|
hwL2mcQinqSourceLimitPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
5: Termination sub-interface
|
|
"
|
|
::= { hwL2mcQinqSourceLimitEntry 1 }
|
|
|
|
hwL2mcQinqSourceLimitIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcQinqSourceLimitEntry 2 }
|
|
|
|
hwL2mcQinqSourceLimitPeVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqSourceLimitEntry 3 }
|
|
|
|
hwL2mcQinqSourceLimitPeVidEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a PE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqSourceLimitEntry 4 }
|
|
|
|
hwL2mcQinqSourceLimitCeVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqSourceLimitEntry 5 }
|
|
|
|
hwL2mcQinqSourceLimitCeVidEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of a CE VID batch.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcQinqSourceLimitEntry 6 }
|
|
|
|
hwL2mcQinqSourceLimitNum OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source number of a QinQ interface."
|
|
::= { hwL2mcQinqSourceLimitEntry 10 }
|
|
|
|
hwL2mcQinqSourceLimitRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { hwL2mcQinqSourceLimitEntry 100 }
|
|
|
|
--
|
|
-- The hwL2mcGeneralNotificationsObject group.
|
|
--
|
|
hwL2mcGeneralNotificationsObject
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 33 }
|
|
|
|
hwL2mcNotificationsPortVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
|
|
The value ranges from 1 to 4095."
|
|
::= { hwL2mcGeneralNotificationsObject 1 }
|
|
|
|
hwL2mcNotificationsPortVsiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a VSI. If a VLAN is specified, the value is 32."
|
|
::= { hwL2mcGeneralNotificationsObject 2 }
|
|
|
|
hwL2mcNotificationsPortType OBJECT-TYPE
|
|
SYNTAX HWPortType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type:
|
|
1: Invalid
|
|
2: PW interface
|
|
3: L2 interface
|
|
4: Encapsulation sub-interface
|
|
5: Termination sub-interface
|
|
6: Interface Board
|
|
7: Vlanif Port
|
|
"
|
|
::= { hwL2mcGeneralNotificationsObject 3 }
|
|
|
|
hwL2mcNotificationsPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index. The value 0 indicates that the interface index is invalid."
|
|
::= { hwL2mcGeneralNotificationsObject 4 }
|
|
|
|
hwL2mcNotificationsPortPeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the PE VID is invalid.
|
|
"
|
|
::= { hwL2mcGeneralNotificationsObject 5 }
|
|
|
|
hwL2mcNotificationsPortCeId OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CE VID of an interface.
|
|
The value ranges from 1 to 4095.
|
|
The value 4095 indicates that the CE VID is invalid.
|
|
"
|
|
::= { hwL2mcGeneralNotificationsObject 6 }
|
|
|
|
hwL2mcNotificationsPortPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
|
|
::= { hwL2mcGeneralNotificationsObject 7 }
|
|
|
|
hwL2mcNotificationsPortVcOrSiteId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC ID or SITE ID of a PW interface."
|
|
::= { hwL2mcGeneralNotificationsObject 8 }
|
|
|
|
hwL2mcNotificationsPortIfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the interface."
|
|
::= { hwL2mcGeneralNotificationsObject 9 }
|
|
|
|
hwL2mcNotificationsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the multicast group and source address. If this object is set to
|
|
unknown(0) indicates that the multicast group and source address is invalid."
|
|
::= { hwL2mcGeneralNotificationsObject 10 }
|
|
hwL2mcNotificationsExceedLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Limit value."
|
|
::= { hwL2mcGeneralNotificationsObject 11 }
|
|
hwL2mcNotificationsExceedGroupAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excess group address. The InetAddressType is given by the
|
|
hwL2mcNotificationsAddressType object.
|
|
The value 0.0.0.0 indicates that the multicast entry is invalid."
|
|
::= { hwL2mcGeneralNotificationsObject 12 }
|
|
hwL2mcNotificationsExceedSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excess source address.The InetAddressType is given by the
|
|
hwL2mcNotificationsAddressType object.
|
|
The value 0.0.0.0 indicates that the multicast entry is (*, G)."
|
|
::= { hwL2mcGeneralNotificationsObject 13 }
|
|
hwL2mcNotificationsPortUserMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User MAC address. The value 0000-0000-0000 indicates that the MAC address is invalid."
|
|
::= { hwL2mcGeneralNotificationsObject 14 }
|
|
--
|
|
-- The l2 multicast Notifications.
|
|
--
|
|
hwL2mcGeneralNotifications
|
|
OBJECT IDENTIFIER ::= { hwIgspMibObject 34 }
|
|
|
|
|
|
hwL2mcPortOtherQuerierTimeout NOTIFICATION-TYPE
|
|
OBJECTS { hwL2mcNotificationsPortVlanIndex,
|
|
hwL2mcNotificationsPortVsiName,
|
|
hwL2mcNotificationsPortType,
|
|
hwL2mcNotificationsPortIfIndex,
|
|
hwL2mcNotificationsPortPeId,
|
|
hwL2mcNotificationsPortCeId,
|
|
hwL2mcNotificationsPortPeerAddress,
|
|
hwL2mcNotificationsPortVcOrSiteId,
|
|
hwL2mcNotificationsPortIfName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A hwL2mcPortOtherQuerierTimeout notification signifies the timer of other querier of port is timeout.
|
|
This notification should be generated when the other querier timer expires, and the router
|
|
has no other querier on the same interface with the same IP version."
|
|
::= { hwL2mcGeneralNotifications 1 }
|
|
|
|
hwL2mcReportListeningGrpExceed NOTIFICATION-TYPE
|
|
OBJECTS { hwL2mcNotificationsAddressType,
|
|
hwL2mcNotificationsPortIfIndex,
|
|
hwL2mcNotificationsPortIfName,
|
|
hwL2mcNotificationsExceedLimit,
|
|
hwL2mcNotificationsExceedGroupAddress,
|
|
hwL2mcNotificationsExceedSourceAddress,
|
|
hwL2mcNotificationsPortVsiName,
|
|
hwL2mcNotificationsPortPeId,
|
|
hwL2mcNotificationsPortCeId,
|
|
hwL2mcNotificationsPortUserMac
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A hwL2mcReportListeningGrpExceed notification signifies The number of multicast groups has exceeded the limit on one slot.
|
|
This notification should be generated when the number of multicast groups has exceeded the limit."
|
|
::= { hwL2mcGeneralNotifications 2 }
|
|
--
|
|
-- Conformance Information
|
|
--
|
|
hwL2mcMibConformance OBJECT IDENTIFIER ::= { hwL2MultiCastMIB 100 }
|
|
hwL2mcMibCompliances OBJECT IDENTIFIER ::= { hwL2mcMibConformance 1 }
|
|
hwL2mcMibGroups OBJECT IDENTIFIER ::= { hwL2mcMibConformance 2 }
|
|
|
|
hwIgspMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device supporting
|
|
IGMP Snooping."
|
|
MODULE
|
|
MANDATORY-GROUPS{
|
|
hwIgspSystemInfoGroup,
|
|
hwL2mcCfgInfoGroup,
|
|
hwL2mcStatisticsInfoGroup,
|
|
hwL2mcFwdInfoGroup,
|
|
hwL2mcGroupInfoGroup,
|
|
hwL2mcGroupCfgInfoGroup,
|
|
hwL2mcSsmSourceInfoGroup,
|
|
hwL2mcPortGroupPolicyCfgInfoGroup,
|
|
hwL2mcChnlCfgInfoGroup,
|
|
hwL2mcLimitInfoGroup,
|
|
hwL2mcPortLimitInfoGroup,
|
|
hwL2mcFastChnlCfgInfoGroup,
|
|
hwL2mcRouterPortInfoGroup,
|
|
hwL2mcRouterPortCfgInfoGroup,
|
|
hwL2mcChnlGroupCfgInfoGroup,
|
|
hwL2mcGroupPolicyCfgInfoGroup,
|
|
hwL2mcChnlDenyCfgInfoGroup,
|
|
hwL2mcQinQPortInfoGroup,
|
|
hwL2mcETrackingInfoInfoGroup,
|
|
hwL2mcSourceGroupInfoGroup,
|
|
hwL2mcDTFwdInfoGroup,
|
|
hwL2mcDTGroupInfoGroup,
|
|
hwL2mcMulticastTrafficPolicyCfgInfoGroup,
|
|
hwL2mcRouteLearnDisablePolicyCfgInfoGroup,
|
|
hwL2mcTrackVRRPCfgInfoGroup,
|
|
hwL2mcGeneralNotificationObjectGroup,
|
|
hwL2mcGeneralNotificationGroup
|
|
}
|
|
::= { hwL2mcMibCompliances 1 }
|
|
|
|
hwIgspSystemInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwIgmpSnoopingEnabled,
|
|
hwSendQueryEnabled,
|
|
hwSendQuerySourceIpAddr,
|
|
hwL2mcCacTrapInterval,
|
|
hwL2mcPerformanceStatisticsInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 1 }
|
|
|
|
hwL2mcCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcEnabled,
|
|
hwL2mcRouterAgingTime,
|
|
hwL2mcMaxQueryRespTime,
|
|
hwL2mcLastMemQueryInterval,
|
|
hwL2mcQueryInterval,
|
|
hwL2mcRobustCount,
|
|
hwL2mcCheckRouterAlert,
|
|
hwL2mcSendRouterAlert,
|
|
hwL2mcIgmpVersion,
|
|
hwL2mcFwdMode,
|
|
hwL2mcPromptLeaveEnable,
|
|
hwL2mcPromptLeaveAclNum,
|
|
hwL2mcRouterPortLearningEnable,
|
|
hwL2mcReportSuppressEnable,
|
|
hwL2mcIgmpQuerierEnable,
|
|
hwL2mcIgmpSsmMappingEnable,
|
|
hwL2mcSsmAclNum,
|
|
hwL2mcProxyRouterProtocolPass,
|
|
hwL2mcAsmSsmFlag,
|
|
hwL2mcSrcLifeTime,
|
|
hwL2mcPerformanceStatistics,
|
|
hwL2mcQuerierElection,
|
|
hwETrackEnable,
|
|
hwL2mcBackupQueryFwd,
|
|
hwL2mcBackupReportFwd,
|
|
hwL2mcQuerySuppress,
|
|
hwL2mcRtLearnRingLinkage,
|
|
hwL2mcIgmpIpPolicyAclNum,
|
|
hwL2mcIgmpSsmMappingPolicy,
|
|
hwL2mcRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 2 }
|
|
|
|
hwL2mcStatisticsInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcRecvIgmpV1ReportNum,
|
|
hwL2mcRecvIgmpV2ReportNum,
|
|
hwL2mcRecvIgmpV3ReportNum,
|
|
hwL2mcRecvIgmpLeaveNum,
|
|
hwL2mcRecvIgmpV1QueryNum,
|
|
hwL2mcRecvIgmpV2QueryNum,
|
|
hwL2mcRecvIgmpV3QueryNum,
|
|
hwL2mcRecvPimHelloNum,
|
|
hwL2mcSendQueryNum,
|
|
hwL2mcSendQuerySourceNum,
|
|
hwL2mcProxyGenQueryNum,
|
|
hwL2mcProxyGroupQueryNum,
|
|
hwL2mcProxyGroupSourceQueryNum,
|
|
hwL2mcIgmpPacketClearStats
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 3 }
|
|
|
|
hwL2mcFwdInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcFwdAddressType,
|
|
hwL2mcFwdHostFlag1,
|
|
hwL2mcFwdHostFlag2,
|
|
hwL2mcFwdHostFlag3,
|
|
hwL2mcFwdHostFlag4
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 4 }
|
|
|
|
hwL2mcGroupInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcSourceUpTime,
|
|
hwL2mcSourceExpires,
|
|
hwL2mcGroupUpTime,
|
|
hwL2mcGroupExpires,
|
|
hwL2mcGroupFilterFlag,
|
|
hwL2mcGroupHostFlag1,
|
|
hwL2mcGroupHostFlag2,
|
|
hwL2mcGroupRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 5 }
|
|
|
|
|
|
hwL2mcGroupCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwGroupCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 6 }
|
|
|
|
hwL2mcSsmSourceInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcSsmSourceRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 7 }
|
|
|
|
hwL2mcPortGroupPolicyCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwPortGroupPolicyAclNum,
|
|
hwPortGroupPolicyIgmpVersion,
|
|
hwPortGroupPolicyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 8 }
|
|
|
|
hwL2mcChnlCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwChnlCfgChnlType,
|
|
hwChnlCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 9 }
|
|
|
|
hwL2mcLimitInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcLimitMaxEntry,
|
|
hwL2mcLimitEntryCnt,
|
|
hwL2mcLimitMaxBandWidth,
|
|
hwL2mcLimitBandWidth,
|
|
hwL2mcLimitAcl,
|
|
hwL2mcLimitCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 10 }
|
|
|
|
hwL2mcPortLimitInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwPortLimitAcl,
|
|
hwPortLimitMaxEntry,
|
|
hwPortLimitEntryCnt,
|
|
hwPortLimitMaxBandWidth,
|
|
hwPortLimitBandWidth,
|
|
hwPortLimitCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 11 }
|
|
|
|
|
|
hwL2mcFastChnlCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcFastChnlCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 12 }
|
|
|
|
|
|
hwL2mcRouterPortInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcRouterPortGroupUpTime,
|
|
hwL2mcRouterPortGroupExpires,
|
|
hwL2mcRouterPortGroupHostFlag1
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 13 }
|
|
|
|
hwL2mcRouterPortCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcRouterPortCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 14 }
|
|
|
|
hwL2mcChnlGroupCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwChnlGroupCfgPerBand,
|
|
hwChnlGroupCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 15 }
|
|
|
|
hwL2mcGroupPolicyCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwGroupPolicyAclNum,
|
|
hwGroupPolicyIgmpVersion,
|
|
hwGroupPolicyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 16}
|
|
|
|
hwL2mcChnlDenyCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwChnlDenyCfg ,
|
|
hwChnlDenyCfgRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 17}
|
|
|
|
hwL2mcQinQPortInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwQinQPortTime ,
|
|
hwQinQPortFlag
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 18}
|
|
|
|
hwL2mcETrackingInfoInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwETrackInfoFlag
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 19}
|
|
|
|
hwL2mcSourceGroupInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcSourceGroupStat
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 22}
|
|
|
|
hwL2mcDTFwdInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcDTFwdAddressType,
|
|
hwL2mcDTFwdHostFlag1,
|
|
hwL2mcDTFwdHostFlag2,
|
|
hwL2mcDTFwdHostFlag3,
|
|
hwL2mcDTFwdHostFlag4
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 23 }
|
|
|
|
hwL2mcDTGroupInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcDTSourceUpTime,
|
|
hwL2mcDTSourceExpires,
|
|
hwL2mcDTGroupUpTime,
|
|
hwL2mcDTGroupExpires,
|
|
hwL2mcDTGroupHostFlag1,
|
|
hwL2mcDTGroupHostFlag2,
|
|
hwL2mcDTGroupRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 24 }
|
|
|
|
hwL2mcMulticastTrafficPolicyCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwMulticastTrafficPolicyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 25 }
|
|
|
|
hwL2mcRouteLearnDisablePolicyCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwRouteLearnDisablePolicyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 26 }
|
|
|
|
hwL2mcTrackVRRPCfgInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwTrackVRRPVridIfIndex,
|
|
hwTrackVRRPVridID,
|
|
hwTrackVRRPRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 27 }
|
|
|
|
hwL2mcGeneralNotificationObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwL2mcNotificationsPortVlanIndex,
|
|
hwL2mcNotificationsPortVsiName,
|
|
hwL2mcNotificationsPortType,
|
|
hwL2mcNotificationsPortIfIndex,
|
|
hwL2mcNotificationsPortPeId,
|
|
hwL2mcNotificationsPortCeId,
|
|
hwL2mcNotificationsPortPeerAddress,
|
|
hwL2mcNotificationsPortVcOrSiteId,
|
|
hwL2mcNotificationsPortIfName,
|
|
hwL2mcNotificationsAddressType,
|
|
hwL2mcNotificationsExceedLimit,
|
|
hwL2mcNotificationsExceedGroupAddress,
|
|
hwL2mcNotificationsExceedSourceAddress,
|
|
hwL2mcNotificationsPortUserMac
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 28 }
|
|
|
|
hwL2mcGeneralNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
hwL2mcPortOtherQuerierTimeout,
|
|
hwL2mcReportListeningGrpExceed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { hwL2mcMibGroups 29 }
|
|
|
|
|
|
END |