898 lines
30 KiB
Plaintext
898 lines
30 KiB
Plaintext
|
||
-- ==================================================================
|
||
-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved.
|
||
--
|
||
-- Description: HUAWEI LI Management MIB HWAWEI-LI-MIB
|
||
-- Reference:
|
||
-- Version: V1.0
|
||
-- History:
|
||
-- V1.0 s49159, 2007-06-10, publish
|
||
-- ==================================================================
|
||
|
||
HUAWEI-LI-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
hwDatacomm
|
||
FROM HUAWEI-MIB
|
||
InetAddress, InetPortNumber, InetAddressType, InetAddressPrefixLength
|
||
FROM INET-ADDRESS-MIB
|
||
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
||
FROM SNMPv2-CONF
|
||
Integer32, Unsigned32, BITS, OBJECT-TYPE, MODULE-IDENTITY,
|
||
NOTIFICATION-TYPE
|
||
FROM SNMPv2-SMI
|
||
DateAndTime, MacAddress, RowStatus, TEXTUAL-CONVENTION
|
||
FROM SNMPv2-TC;
|
||
|
||
hwLiMib MODULE-IDENTITY
|
||
LAST-UPDATED "200706270000Z"
|
||
ORGANIZATION
|
||
"hw Technologies co.,Ltd."
|
||
CONTACT-INFO
|
||
" R&D Meaning, huawei Technologies co.,Ltd.
|
||
Http://www.huawei.com
|
||
E-mail:support@huawei.com "
|
||
DESCRIPTION
|
||
"This module manages huawei's Lawful interception feature."
|
||
REVISION "200706270000Z"
|
||
DESCRIPTION
|
||
"Initial version of this MIB module."
|
||
::= { hwDatacomm 131 }
|
||
|
||
|
||
|
||
--
|
||
-- Textual conventions
|
||
--
|
||
|
||
HWLiDscp ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An integer that is in the range of the DiffServ codepoint
|
||
values."
|
||
SYNTAX Integer32 (0..63)
|
||
|
||
|
||
--
|
||
-- Node definitions
|
||
--
|
||
|
||
|
||
hwLiMibNotifs OBJECT IDENTIFIER ::= { hwLiMib 1 }
|
||
|
||
|
||
|
||
hwLiMibActive NOTIFICATION-TYPE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when an intercepting router or switch is first
|
||
capable of intercepting a packet corresponding to a configured data stream. "
|
||
::= { hwLiMibNotifs 1 }
|
||
|
||
|
||
hwLiX3HeartBeatAlarm NOTIFICATION-TYPE
|
||
OBJECTS { hwLiGatewayX3Address }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when an LIG is lost connection to the device
|
||
which intercepting packet corresponding to a configured data stream. "
|
||
::= { hwLiMibNotifs 2 }
|
||
|
||
|
||
hwLiX3HeartBeatRecover NOTIFICATION-TYPE
|
||
OBJECTS { hwLiGatewayX3Address }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when an LIG is recover connection to the device
|
||
which intercepting packet corresponding to a configured data stream. "
|
||
::= { hwLiMibNotifs 3 }
|
||
|
||
|
||
hwLiMibObjects OBJECT IDENTIFIER ::= { hwLiMib 2 }
|
||
|
||
|
||
|
||
hwLiAgentObjects OBJECT IDENTIFIER ::= { hwLiMibObjects 1 }
|
||
|
||
|
||
|
||
hwLiAgentTime OBJECT-TYPE
|
||
SYNTAX DateAndTime
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The time of the LI agent.Read-only."
|
||
::= { hwLiAgentObjects 1 }
|
||
|
||
|
||
|
||
hwLiAgentEnable OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
enabled(1),
|
||
disabled(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The status of the LI agent.Read-only."
|
||
::= { hwLiAgentObjects 2 }
|
||
|
||
|
||
|
||
hwLiAgentX2IpAddress OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP address of the X2 interface in LI agent.Just can be read by server
|
||
and can be set in command line."
|
||
::= { hwLiAgentObjects 3 }
|
||
|
||
|
||
hwLiAgentX2Port OBJECT-TYPE
|
||
SYNTAX InetPortNumber
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Port of the X2 interface in LI agent.Just can be read by server
|
||
and can be set in command line."
|
||
::= { hwLiAgentObjects 4 }
|
||
|
||
|
||
hwLiAgentX3IpAddress OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP address of the X3 interface in LI agent.Just can be read by server
|
||
and can be set in command line."
|
||
::= { hwLiAgentObjects 5 }
|
||
|
||
|
||
hwLiAgentX3Port OBJECT-TYPE
|
||
SYNTAX InetPortNumber
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Port of the X3 interface in LI agent.Just can be read by server
|
||
and can be set in command line."
|
||
::= { hwLiAgentObjects 6 }
|
||
|
||
|
||
|
||
hwLiGatewayGroup OBJECT IDENTIFIER ::= { hwLiMibObjects 3 }
|
||
|
||
|
||
|
||
hwLiGatewayNewIndex OBJECT-TYPE
|
||
SYNTAX Integer32 (0 | 1..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object contains a value which may be used as an index
|
||
value for a new HwLiGatewayEntry. This is to reduce
|
||
the probability of errors during creation of new hwLiGatewayTable
|
||
entries.0 means no free resource."
|
||
::= { hwLiGatewayGroup 1 }
|
||
|
||
|
||
hwLiGatewayTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwLiGatewayEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table lists the LI Gateway Devices with which the
|
||
intercepting device communicates.
|
||
|
||
This table is written by the LI Gateway Device, and is always
|
||
volatile. This is because intercepts may disappear during a
|
||
restart of the intercepting equipment.
|
||
|
||
Entries are added to this table via hwLiGatewayStatus in
|
||
accordance with the RowStatus convention."
|
||
::= { hwLiGatewayGroup 2 }
|
||
|
||
|
||
hwLiGatewayEntry OBJECT-TYPE
|
||
SYNTAX HwLiGatewayEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The entry describes a single session maintained with an
|
||
application on a LI Gateway Device."
|
||
INDEX { hwLiGatewayIndex }
|
||
::= { hwLiGatewayTable 1 }
|
||
|
||
|
||
HwLiGatewayEntry ::=
|
||
SEQUENCE {
|
||
hwLiGatewayIndex
|
||
Integer32,
|
||
hwLiGatewayAddressType
|
||
InetAddressType,
|
||
hwLiGatewayX2Protocol
|
||
INTEGER,
|
||
hwLiGatewayX2Address
|
||
InetAddress,
|
||
hwLiGatewayX2Port
|
||
InetPortNumber,
|
||
hwLiGatewayX3Protocol
|
||
INTEGER,
|
||
hwLiGatewayX3Address
|
||
InetAddress,
|
||
hwLiGatewayX3Port
|
||
InetPortNumber,
|
||
hwLiGatewayX3HeartBeatTimer
|
||
Integer32,
|
||
hwLiGatewayX3NoResponseNum
|
||
Integer32,
|
||
hwLiGatewayX3OperateStatus
|
||
INTEGER,
|
||
hwLiGatewayX3Dscp
|
||
HWLiDscp,
|
||
hwLiGatewayRowStatus
|
||
RowStatus,
|
||
hwLiGatewayX3AddressType
|
||
InetAddressType,
|
||
hwLiGatewayX2AddressType
|
||
InetAddressType
|
||
}
|
||
|
||
|
||
hwLiGatewayIndex OBJECT-TYPE
|
||
SYNTAX Integer32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of the LIG itself."
|
||
::= { hwLiGatewayEntry 1 }
|
||
|
||
|
||
hwLiGatewayAddressType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The type of address in LIG"
|
||
DEFVAL { ipv4 }
|
||
::= { hwLiGatewayEntry 2 }
|
||
|
||
|
||
hwLiGatewayX2Protocol OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
udp(1),
|
||
tcp(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The protocol used in transferring intercepted data to the
|
||
Gateway Device. "
|
||
DEFVAL { tcp }
|
||
::= { hwLiGatewayEntry 3 }
|
||
|
||
|
||
|
||
hwLiGatewayX2Address OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP Address of the Gateway Device's network interface
|
||
to which to direct IRI."
|
||
::= { hwLiGatewayEntry 4 }
|
||
|
||
|
||
|
||
hwLiGatewayX2Port OBJECT-TYPE
|
||
SYNTAX InetPortNumber
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port number on the Gateway Device's network interface
|
||
to which to direct IRI."
|
||
::= { hwLiGatewayEntry 5 }
|
||
|
||
|
||
|
||
hwLiGatewayX3Protocol OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
udp(1),
|
||
tcp(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The protocol used in transferring intercepted data to the
|
||
Gateway Device. "
|
||
DEFVAL { udp }
|
||
::= { hwLiGatewayEntry 6 }
|
||
|
||
|
||
hwLiGatewayX3Address OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP Address of the Gateway Device's network interface
|
||
to which to direct CC."
|
||
::= { hwLiGatewayEntry 7 }
|
||
|
||
|
||
|
||
hwLiGatewayX3Port OBJECT-TYPE
|
||
SYNTAX InetPortNumber
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port number on the Gateway Device's network interface
|
||
to which to direct intercepted traffic."
|
||
::= { hwLiGatewayEntry 8 }
|
||
|
||
|
||
|
||
hwLiGatewayX3HeartBeatTimer OBJECT-TYPE
|
||
SYNTAX Integer32 (0..255)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The timer for sending HeartBeat to LIG,In seconds"
|
||
DEFVAL { 5 }
|
||
::= { hwLiGatewayEntry 9 }
|
||
|
||
|
||
|
||
hwLiGatewayX3NoResponseNum OBJECT-TYPE
|
||
SYNTAX Integer32 (2..16)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The times of heartbeats that allowed to missed from LIG"
|
||
DEFVAL { 3 }
|
||
::= { hwLiGatewayEntry 10 }
|
||
|
||
|
||
|
||
hwLiGatewayX3OperateStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
normal(1),
|
||
noHeartBeat(2),
|
||
linkdown(3)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The operate status of X3 interface"
|
||
::= { hwLiGatewayEntry 11 }
|
||
|
||
|
||
|
||
hwLiGatewayX3Dscp OBJECT-TYPE
|
||
SYNTAX HWLiDscp
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Differentiated Services Code Point the intercepting
|
||
device applies to the IP packets encapsulating the
|
||
intercepted traffic."
|
||
DEFVAL { 0 }
|
||
::= { hwLiGatewayEntry 12 }
|
||
|
||
|
||
|
||
hwLiGatewayRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The status of this conceptual row. This object is used to
|
||
manage creation, modification and deletion of rows in this
|
||
table.
|
||
"
|
||
::= { hwLiGatewayEntry 14 }
|
||
|
||
|
||
hwLiGatewayX3AddressType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The type of address in LIG"
|
||
DEFVAL { ipv4 }
|
||
::= { hwLiGatewayEntry 15 }
|
||
|
||
|
||
hwLiGatewayX2AddressType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The type of address in LIG"
|
||
DEFVAL { ipv4 }
|
||
::= { hwLiGatewayEntry 16 }
|
||
|
||
|
||
|
||
hwLiGatewayCapabilities OBJECT-TYPE
|
||
SYNTAX BITS
|
||
{
|
||
ipv4SrcInterface(0),
|
||
ipv6SrcInterface(1),
|
||
udp(2),
|
||
tcp(3)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object displays the device capabilities with respect to
|
||
certain fields in Gateway Device table. This may be dependent
|
||
on hardware capabilities, software capabilities.
|
||
The following values may be supported:
|
||
ipv4SrcInterface: SNMP ifIndex Value may be used to select
|
||
the interface (denoted by
|
||
hwLiGatewaySrcInterface) on the
|
||
intercepting device from which to
|
||
transmit intercepted data to an IPv4
|
||
address Gateway Device.
|
||
|
||
|
||
ipv6SrcInterface: SNMP ifIndex Value may be used to select
|
||
the interface (denoted by
|
||
hwLiGatewaySrcInterface) on the
|
||
intercepting device from which to
|
||
transmit intercepted data to an IPv6
|
||
address Gateway Device.
|
||
|
||
|
||
udp: UDP may be used as transport protocol
|
||
(denoted by hwLiGatewayTransport) in
|
||
transferring intercepted data to the
|
||
Gateway Device.
|
||
|
||
|
||
tcp: TCP may be used as transport protocol
|
||
(denoted by hwLiGatewayTransport) in
|
||
transferring intercepted data to the
|
||
Gateway Device."
|
||
::= { hwLiGatewayGroup 3 }
|
||
|
||
|
||
|
||
hwLiStreamGroup OBJECT IDENTIFIER ::= { hwLiMibObjects 4 }
|
||
|
||
|
||
|
||
hwLiStreamTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwLiStreamEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Intercept Stream Table lists the IPv4 and IPv6 streams
|
||
to be intercepted. The same data stream must be used by
|
||
one LIG.
|
||
|
||
The first index indicates which LIG the
|
||
intercepted traffic will be diverted to. The second index
|
||
permits multiple classifiers to be used together, such as
|
||
having an IP address as source or destination."
|
||
::= { hwLiStreamGroup 2 }
|
||
|
||
|
||
hwLiStreamEntry OBJECT-TYPE
|
||
SYNTAX HwLiStreamEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A stream entry indicates a single data stream to be
|
||
intercepted to a Mediation Device. Many selected data
|
||
streams may go to the same application interface, and many
|
||
application interfaces are supported."
|
||
INDEX { hwLiGatewayIndex, hwLiStreamIndex }
|
||
::= { hwLiStreamTable 1 }
|
||
|
||
|
||
HwLiStreamEntry ::=
|
||
SEQUENCE {
|
||
hwLiStreamIndex
|
||
Integer32,
|
||
hwLiStreamLiId
|
||
Unsigned32,
|
||
hwLiStreamActivationType
|
||
INTEGER,
|
||
hwLiStreamSessionId
|
||
Integer32,
|
||
hwLiStreamTargetIdType
|
||
INTEGER,
|
||
hwLiStreamSrcMacAddress
|
||
MacAddress,
|
||
hwLiStreamDstMacAddress
|
||
MacAddress,
|
||
hwLiStreamSrcIpAddress
|
||
InetAddress,
|
||
hwLiStreamSrcIpLength
|
||
InetAddressPrefixLength,
|
||
hwLiStreamDstIpAddress
|
||
InetAddress,
|
||
hwLiStreamDstIpLength
|
||
InetAddressPrefixLength,
|
||
hwLiStreamProtocol
|
||
Integer32,
|
||
hwLiStreamSrcPort
|
||
InetPortNumber,
|
||
hwLiStreamDstPort
|
||
InetPortNumber,
|
||
hwLiStreamIfIndex
|
||
Integer32,
|
||
hwLiStreamUserName
|
||
OCTET STRING,
|
||
hwLiStreamRowStatus
|
||
RowStatus,
|
||
hwLiStreamSrcIpAddressType
|
||
InetAddressType,
|
||
hwLiStreamDstIpAddressType
|
||
InetAddressType,
|
||
hwLiStreamSrcVpnName
|
||
OCTET STRING,
|
||
hwLiStreamDstVpnName
|
||
OCTET STRING,
|
||
hwLiStreamL2tpIfIndex
|
||
Integer32,
|
||
hwLiStreamL2tpVlanId
|
||
Integer32,
|
||
hwLiStreamAcctSessionId
|
||
OCTET STRING
|
||
}
|
||
|
||
|
||
hwLiStreamIndex OBJECT-TYPE
|
||
SYNTAX Integer32 (1..8192)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of the stream itself."
|
||
::= { hwLiStreamEntry 1 }
|
||
|
||
|
||
|
||
hwLiStreamLiId OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ID indicate a independency stream in a LIG ."
|
||
::= { hwLiStreamEntry 2 }
|
||
|
||
|
||
|
||
hwLiStreamActivationType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
iri(1),
|
||
cc(2),
|
||
both(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Intercepted IRI or CC or BOTH."
|
||
DEFVAL { cc }
|
||
::= { hwLiStreamEntry 3 }
|
||
|
||
|
||
|
||
hwLiStreamSessionId OBJECT-TYPE
|
||
SYNTAX Integer32 (0..2147483647)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of the stream itself.0 means no session ID will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 4 }
|
||
|
||
|
||
|
||
hwLiStreamTargetIdType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
oneDirection(1),
|
||
biDirection(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Target ID type specifies the type of packets.
|
||
1 means one direction traffic is intercept,
|
||
2 means bidirectional traffic is intercept.
|
||
|
||
for bidirectional interception, if the source IP or destination IP
|
||
in a packet is equal with the configured hwLiStreamSrcIpAddress<73><73>
|
||
If other condition is satisfied then the packet is intercepted.
|
||
|
||
for one-directional interception, if the sourceIP and DestinationIP
|
||
in a packet is equal with the configured hwLiStreamSrcIpAddress and
|
||
hwLiStreamDstIPAddress<73><73>If other condition is satisfied then the
|
||
packet is intercepted"
|
||
DEFVAL { biDirection }
|
||
::= { hwLiStreamEntry 5 }
|
||
|
||
|
||
|
||
hwLiStreamSrcMacAddress OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Source Mac address of the packets which will be intercepted.0000-0000-0000 means no MAC address will be specified"
|
||
::= { hwLiStreamEntry 7 }
|
||
|
||
|
||
|
||
hwLiStreamDstMacAddress OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Destination Mac address of the packets which will be intercepted."
|
||
::= { hwLiStreamEntry 8 }
|
||
|
||
|
||
|
||
hwLiStreamSrcIpAddress OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Source Address used in packet selection. This address will
|
||
be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified"
|
||
DEFVAL { '00000000'H }
|
||
::= { hwLiStreamEntry 9 }
|
||
|
||
|
||
|
||
hwLiStreamSrcIpLength OBJECT-TYPE
|
||
SYNTAX InetAddressPrefixLength
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The length of the Source Prefix. A value of 32 causes all
|
||
addresses to match. This prefix length will be consistent with
|
||
the type specified in hwLiStreamIpAddrType."
|
||
DEFVAL { 32 }
|
||
::= { hwLiStreamEntry 10 }
|
||
|
||
|
||
|
||
hwLiStreamDstIpAddress OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Destination address or prefix used in packet selection.
|
||
This address will be of the type specified in
|
||
hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified"
|
||
DEFVAL { '00000000'H }
|
||
::= { hwLiStreamEntry 11 }
|
||
|
||
|
||
hwLiStreamDstIpLength OBJECT-TYPE
|
||
SYNTAX InetAddressPrefixLength
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The length of the Destination Prefix. A value of 32 causes
|
||
all addresses to match. This prefix length will be consistent
|
||
with the type specified in hwLiStreamIpAddrType."
|
||
DEFVAL { 32 }
|
||
::= { hwLiStreamEntry 12 }
|
||
|
||
|
||
|
||
hwLiStreamProtocol OBJECT-TYPE
|
||
SYNTAX Integer32 (0..255)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Protocol type of the packets which will be intercepted.0 means no Protocol type will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 13 }
|
||
|
||
|
||
hwLiStreamSrcPort OBJECT-TYPE
|
||
SYNTAX InetPortNumber
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The fourth layer source port.0 means no Port will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 14 }
|
||
|
||
|
||
hwLiStreamDstPort OBJECT-TYPE
|
||
SYNTAX InetPortNumber
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The fourth layer Destination port.0 means no Port will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 15 }
|
||
|
||
|
||
|
||
hwLiStreamIfIndex OBJECT-TYPE
|
||
SYNTAX Integer32 (0..2147483647)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The interface switch carrying the intercepted taffic.0 means no interface will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 16 }
|
||
|
||
|
||
|
||
hwLiStreamUserName OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The username whose traffic will be intercepted.zero-length means no user will be specified"
|
||
::= { hwLiStreamEntry 17 }
|
||
|
||
|
||
hwLiStreamRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The status of this conceptual row. This object is used to
|
||
manage creation, modification and deletion of rows in this
|
||
table."
|
||
::= { hwLiStreamEntry 18 }
|
||
|
||
|
||
hwLiStreamSrcIpAddressType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The source IP address of the interception stream"
|
||
DEFVAL { ipv4 }
|
||
::= { hwLiStreamEntry 19 }
|
||
|
||
|
||
hwLiStreamDstIpAddressType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The destination IP address of the interception stream"
|
||
DEFVAL { ipv4 }
|
||
::= { hwLiStreamEntry 20 }
|
||
|
||
|
||
hwLiStreamSrcVpnName OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The source VPN instance name whose traffic will be intercepted.zero-length means no VPN will be specified"
|
||
::= { hwLiStreamEntry 21 }
|
||
|
||
|
||
|
||
hwLiStreamDstVpnName OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The destination VPN instance name whose traffic will be intercepted. zero-length means no VPN will be specified"
|
||
::= { hwLiStreamEntry 22 }
|
||
|
||
|
||
hwLiStreamL2tpIfIndex OBJECT-TYPE
|
||
SYNTAX Integer32 (0..2147483647)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The L2TP ifindex of intercepting stream.0 means no l2tpIfindex will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 23 }
|
||
|
||
hwLiStreamL2tpVlanId OBJECT-TYPE
|
||
SYNTAX Integer32 (0..2147483647)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The L2TP VLAN ID of intercepting stream.0 means no Vlan will be specified"
|
||
DEFVAL { 0 }
|
||
::= { hwLiStreamEntry 24 }
|
||
|
||
hwLiStreamAcctSessionId OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The accounting session ID of intercepting stream.zero-length means no accouting session ID will be specified"
|
||
::= { hwLiStreamEntry 25 }
|
||
|
||
hwLiMibConform OBJECT IDENTIFIER ::= { hwLiMib 3 }
|
||
|
||
|
||
|
||
hwLiMibCompliances OBJECT IDENTIFIER ::= { hwLiMibConform 2 }
|
||
|
||
|
||
hwLiMibCompliance MODULE-COMPLIANCE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Description."
|
||
MODULE -- this module
|
||
MANDATORY-GROUPS { hwLiGatewayComplianceGroup, hwLiStreamComplianceGroup, hwLiNotificationGroup, hwLiGatewayCpbComplianceGroup }
|
||
::= { hwLiMibCompliances 1 }
|
||
|
||
|
||
|
||
hwLiMibGroups OBJECT IDENTIFIER ::= { hwLiMibConform 3 }
|
||
|
||
|
||
|
||
hwLiAgentComplianceGroup OBJECT-GROUP
|
||
OBJECTS { hwLiAgentTime, hwLiAgentEnable, hwLiAgentX2IpAddress, hwLiAgentX2Port, hwLiAgentX3IpAddress,
|
||
hwLiAgentX3Port }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Description."
|
||
::= { hwLiMibGroups 1 }
|
||
|
||
|
||
|
||
hwLiGatewayComplianceGroup OBJECT-GROUP
|
||
OBJECTS { hwLiGatewayNewIndex, hwLiGatewayAddressType, hwLiGatewayX2Protocol, hwLiGatewayX2Address, hwLiGatewayX2Port,
|
||
hwLiGatewayX3Protocol, hwLiGatewayX3Address, hwLiGatewayX3Port, hwLiGatewayX3HeartBeatTimer, hwLiGatewayX3NoResponseNum,
|
||
hwLiGatewayX3OperateStatus, hwLiGatewayX3Dscp, hwLiGatewayRowStatus,hwLiGatewayX3AddressType,hwLiGatewayX2AddressType }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Description."
|
||
::= { hwLiMibGroups 2 }
|
||
|
||
|
||
|
||
hwLiStreamComplianceGroup OBJECT-GROUP
|
||
OBJECTS { hwLiStreamLiId, hwLiStreamActivationType, hwLiStreamSessionId, hwLiStreamTargetIdType,
|
||
hwLiStreamProtocol, hwLiStreamSrcPort,hwLiStreamDstPort,hwLiStreamSrcMacAddress, hwLiStreamDstMacAddress, hwLiStreamSrcIpAddress, hwLiStreamSrcIpLength,
|
||
hwLiStreamDstIpAddress, hwLiStreamDstIpLength, hwLiStreamIfIndex, hwLiStreamUserName, hwLiStreamRowStatus,
|
||
hwLiStreamSrcIpAddressType,hwLiStreamDstIpAddressType,hwLiStreamSrcVpnName,hwLiStreamDstVpnName,
|
||
hwLiStreamL2tpIfIndex,hwLiStreamL2tpVlanId,hwLiStreamAcctSessionId }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Description."
|
||
::= { hwLiMibGroups 3 }
|
||
|
||
|
||
|
||
hwLiNotificationGroup NOTIFICATION-GROUP
|
||
NOTIFICATIONS { hwLiMibActive, hwLiX3HeartBeatAlarm, hwLiX3HeartBeatRecover}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Description."
|
||
::= { hwLiMibGroups 4 }
|
||
|
||
|
||
|
||
hwLiGatewayCpbComplianceGroup OBJECT-GROUP
|
||
OBJECTS { hwLiGatewayCapabilities }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Description."
|
||
::= { hwLiMibGroups 5 }
|
||
|
||
|
||
|
||
END
|
||
|
||
|
||
|