mibs/MIBS/huawei/HUAWEI-PIM-STD-MIB
2023-12-05 12:25:34 +01:00

4010 lines
146 KiB
Plaintext

-- ============================================================================
-- Copyright (C) 2016 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI-PIM-STD-MIB.my , this MIB module for management of
-- the Protocol Independent Multicast (PIM) protocols for PIM routers.
-- Reference:
-- Version: V2.06
-- History:
-- created by wangyanwei 63315 2007-04-24
--
-- ============================================================================
HUAWEI-PIM-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
NOTIFICATION-TYPE, Unsigned32,
Counter32, Counter64, Gauge32,
TimeTicks FROM SNMPv2-SMI -- [RFC2578]
TimeStamp FROM SNMPv2-TC -- [Add by yuyunfu 54617]
TEXTUAL-CONVENTION,
RowStatus, TruthValue, DisplayString,
StorageType FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
InterfaceIndexOrZero,
InterfaceIndex FROM IF-MIB -- [RFC2863]
InetAddressType,
InetAddressPrefixLength,
InetAddress, InetVersion FROM INET-ADDRESS-MIB -- [RFC4001]
IANAipRouteProtocol FROM IANA-RTPROTO-MIB -- [RTPROTO]
hwDatacomm FROM HUAWEI-MIB;
hwMcast OBJECT IDENTIFIER ::= { hwDatacomm 149 }
hwPimStdMib MODULE-IDENTITY
LAST-UPDATED "201611090000Z" -- 9 Nov 2016
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"The MIB module for management of PIM routers.
Huawei Technologies co.,Ltd . Supplementary information may
be available at:
http://www.huawei.com"
REVISION "201611090000Z" -- 9 Nov 2016
DESCRIPTION "Modify the description of hwPimNotificationLimitType."
REVISION "201605260000Z" -- 26 May 2016
DESCRIPTION "1.Add hwPimGlobalTypeSGThresholdExceed.
2.Add hwPimGlobalTypeSGThresholdExceedClear.
3.Add hwPimGlobalTypeSGExceed.
4.Add hwPimGlobalTypeSGExceedClear.
"
REVISION "201407010000Z" -- 1 July 2014
DESCRIPTION "1.Modify the description of hwPimStarGThresholdExceed.
2.Modify the description of hwPimStarGThresholdExceedClear.
3.Modify the description of hwPimStarGExceedClear.
4.Modify the description of hwPimSGThresholdExceed.
5.Modify the description of hwPimSGThresholdExceedClear.
6.Modify the description of hwPimSGExceedClear.
"
REVISION "201406200000Z" -- 20 Jun 2014
DESCRIPTION "1.Add hwPimStarGThresholdExceed trap.
2.Add hwPimStarGThresholdExceedClear trap.
3.Add hwPimStarGExceed trap.
4.Add hwPimStarGExceedClear trap.
5.Add hwPimSGThresholdExceed trap.
6.Add hwPimSGThresholdExceedClear trap.
7.Add hwPimSGExceed trap.
8.Add hwPimSGExceedClear trap.
"
REVISION "201305060000Z" -- 6 May 2013
DESCRIPTION "Modify the description of hwPimNeighborLoss."
REVISION "200704240000Z" -- 24 April 2007
DESCRIPTION "The initial revision of this Mib module."
::= { hwMcast 4 }
HWPimMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The PIM mode in which a group is operating.
none(1) The group is not using PIM, which may be the
case if, for example, it is a link-local or
unroutable group address.
ssm(2) Source-Specific Multicast (SSM) with PIM Sparse
Mode.
asm(3) Any Source Multicast (ASM), with PIM Sparse
Mode.
bidir(4) Bi-directional PIM.
dm(5) PIM Dense Mode.
other(6) Any other PIM mode."
SYNTAX INTEGER {
none(1),
ssm(2),
asm(3),
bidir(4),
dm(5),
other(6)
}
HWPimGroupMappingOriginType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The mechanism by which a PIM group mapping was learned.
fixed(1) Link-local or unroutable group mappings.
configRp(2) Local static RP configuration.
configSsm(3) Local SSM Group configuration.
bsr(4) The PIM Bootstrap Router (BSR) mechanism.
autoRp(5) Auto-RP mechanism.
embedded(6) The Embedded-RP mechanism where the RP address
is embedded in the multicast group address.
other(7) Any other mechanism."
REFERENCE "RFC 3596, RFC 3956 and I-D.ietf-pim-sm-bsr"
SYNTAX INTEGER {
fixed(1),
configRp(2),
configSsm(3),
bsr(4),
autoRp(5),
embedded(6),
other(7)
}
HWPimCtlMsgState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The PIM control message state.
recv(1) The PIM control message has been received.
sent(2) The PIM control message has been sent.
invalid(3) The invalid PIM control message has been received.
filter(4) The PIM control message has been filtered."
SYNTAX INTEGER {
recv(1),
sent(2),
invalid(3),
filter(4)
}
hwPimNotifications OBJECT IDENTIFIER ::= { hwPimStdMib 0 }
hwPim OBJECT IDENTIFIER ::= { hwPimStdMib 1 }
hwPimKeepalivePeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of the Keepalive Timer. This is the period
during which the PIM router will maintain (S,G) state in the
absence of explicit (S,G) local membership or (S,G) join
messages received to maintain it. This timer period is
called the Keepalive_Period in the PIM-SM specification. It
is called the SourceLifetime in the PIM-DM specification.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 210 }"
REFERENCE "RFC 4601 section 4.11"
::= { hwPim 14 }
hwPimRegisterSuppressionTime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of the Register Suppression Timer. This is
the period during which a PIM Designated Router (DR) stops
sending Register-encapsulated data to the Rendezvous Point
(RP) after receiving a Register-Stop message. This object
is used to run timers both at the DR and at the RP. This
timer period is called the Register_Suppression_Time in the
PIM-SM specification.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 60 }"
REFERENCE "RFC 4601 section 4.11"
::= { hwPim 15 }
hwPimStarGEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the hwPimStarGTable."
::= { hwPim 16 }
hwPimStarGIEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the hwPimStarGITable."
::= { hwPim 17 }
hwPimSGEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the hwPimSGTable."
::= { hwPim 18 }
hwPimSGIEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the hwPimSGITable."
::= { hwPim 19 }
hwPimSGRptEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the hwPimSGRptTable."
::= { hwPim 20 }
hwPimSGRptIEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the hwPimSGRptITable."
::= { hwPim 21 }
hwPimOutAsserts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Asserts sent by this router.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.6"
::= { hwPim 22 }
hwPimInAsserts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Asserts received by this router. Asserts
are multicast to all routers on a network. This counter is
incremented by all routers that receive an assert, not only
those routers that are contesting the assert.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.6"
::= { hwPim 23 }
hwPimLastAssertInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which this router most recently sent or
received an assert, or zero if this router has not sent or
received an assert."
REFERENCE "RFC 4601 section 4.6"
::= { hwPim 24 }
hwPimLastAssertGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the multicast group address in the most
recently sent or received assert. If this router has not
sent or received an assert then this object is set to
unknown(0)."
::= { hwPim 25 }
hwPimLastAssertGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast group address in the most recently sent or
received assert. The InetAddressType is given by the
hwPimLastAssertGroupAddressType object."
::= { hwPim 26 }
hwPimLastAssertSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the multicast source address in the
most recently sent or received assert. If the most recent
assert was (*,G), or if this router has not sent or received
an assert, then this object is set to unknown(0)."
::= { hwPim 27 }
hwPimLastAssertSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast source address in the most recently sent or
received assert. The InetAddressType is given by the
hwPimLastAssertSourceAddressType object."
::= { hwPim 28 }
hwPimNeighborLossNotificationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time that must elapse between hwPimNeighborLoss
notifications originated by this router. The maximum value
65535 represents an 'infinite' time, in which case no
hwPimNeighborLoss notifications are ever sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 0 }"
::= { hwPim 29 }
hwPimNeighborLossCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbor loss events that have occurred.
This counter is incremented when the neighbor timer expires.
This counter is incremented whenever a hwPimNeighborLoss
notification would be generated.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.3.2"
::= { hwPim 30 }
hwPimInvalidRegisterNotificationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (10..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time that must elapse between
hwPimInvalidRegister notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no hwPimInvalidRegister notifications are ever
sent.
The non-zero minimum allowed value provides resilience
against propagation of denial-of-service attacks from the
data and control planes to the network management plane.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }"
::= { hwPim 31 }
hwPimInvalidRegisterMsgsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid PIM Register messages that have been
received by this device.
A PIM Register message is invalid if either
o the destination address of the Register message does not
match the Group to RP mapping on this device, or
o this device believes the group address to be within an
SSM address range, but this Register implies ASM usage.
These conditions can occur transiently while RP mapping
changes propagate through the network. If this counter is
incremented repeatedly over several minutes, then there is a
persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified
by the object hwPimGroupMappingPimMode. If there is no such
mapping, then the object hwPimGroupMappingPimMode is absent.
The RP address contained in the invalid Register is
hwPimInvalidRegisterRp.
Multicast data carried by invalid Register messages is
discarded. The discarded data is from a source directly
connected to hwPimInvalidRegisterOrigin, and is addressed to
hwPimInvalidRegisterGroup.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.4.2, RFC 3569 and
I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable"
::= { hwPim 32 }
hwPimInvalidRegisterAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type stored in hwPimInvalidRegisterOrigin,
hwPimInvalidRegisterGroup and hwPimInvalidRegisterRp.
If no unexpected Register messages have been received, then
this object is set to unknown(0)."
::= { hwPim 33 }
hwPimInvalidRegisterOrigin OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the last unexpected Register message
received by this device."
::= { hwPim 34 }
hwPimInvalidRegisterGroup OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast group address to which the last unexpected
Register message received by this device was addressed."
::= { hwPim 35 }
hwPimInvalidRegisterRp OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RP address to which the last unexpected Register
message received by this device was delivered."
::= { hwPim 36 }
hwPimInvalidJoinPruneNotificationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (10..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time that must elapse between
hwPimInvalidJoinPrune notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no hwPimInvalidJoinPrune notifications are ever
sent.
The non-zero minimum allowed value provides resilience
against propagation of denial-of-service attacks from the
control plane to the network management plane.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }"
::= { hwPim 37 }
hwPimInvalidJoinPruneMsgsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid PIM Join/Prune messages that have
been received by this device.
A PIM Join/Prune message is invalid if either
o the Group to RP mapping specified by this message does not
match the Group to RP mapping on this device, or
o this device believes the group address to be within an
SSM address range, but this Join/Prune (*,G) or (S,G,rpt)
implies ASM usage.
These conditions can occur transiently while RP mapping
changes propagate through the network. If this counter is
incremented repeatedly over several minutes, then there is a
persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified
by the object hwPimGroupMappingPimMode. If there is no such
mapping, then the object hwPimGroupMappingPimMode is absent.
The RP address contained in the invalid Join/Prune is
hwPimInvalidJoinPruneRp.
Invalid Join/Prune messages are discarded. This may result
in loss of multicast data affecting listeners downstream of
hwPimInvalidJoinPruneOrigin, for multicast data addressed to
hwPimInvalidJoinPruneGroup.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.5.2, RFC 3569 and
I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable"
::= { hwPim 38 }
hwPimInvalidJoinPruneAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type stored in hwPimInvalidJoinPruneOrigin,
hwPimInvalidJoinPruneGroup and hwPimInvalidJoinPruneRp.
If no unexpected Join/Prune messages have been received,
this object is set to unknown(0)."
::= { hwPim 39 }
hwPimInvalidJoinPruneOrigin OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the last unexpected Join/Prune
message received by this device."
::= { hwPim 40 }
hwPimInvalidJoinPruneGroup OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast group address carried in the last
unexpected Join/Prune message received by this device."
::= { hwPim 41 }
hwPimInvalidJoinPruneRp OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RP address carried in the last unexpected Join/Prune
message received by this device."
::= { hwPim 42 }
hwPimRpMappingNotificationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time that must elapse between
hwPimRpMappingChange notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no hwPimRpMappingChange notifications are ever
sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }"
::= { hwPim 43 }
hwPimRpMappingChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of changes to active RP mappings on this device.
Information about active RP mappings is available in
hwPimGroupMappingTable. Only changes to active mappings cause
this counter to be incremented. That is, changes that
modify the hwPimGroupMappingEntry with the highest precedence
for a group (lowest value of hwPimGroupMappingPrecedence).
Such changes may result from manual configuration of this
device, or from automatic RP mapping discovery methods
including the PIM Bootstrap Router (BSR) mechanism.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "I-D.ietf-pim-sm-bsr"
::= { hwPim 44 }
hwPimInterfaceElectionNotificationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time that must elapse between
hwPimInterfaceElection notifications originated by this
router. The default value of 65535 represents an 'infinite'
time, in which case no hwPimInterfaceElection notifications
are ever sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }"
::= { hwPim 45 }
hwPimInterfaceElectionWinCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this device has been elected DR or DF
on any interface.
Elections occur frequently on newly-active interfaces, as
triggered Hellos establish adjacencies. This counter is not
incremented for elections on an interface until the first
periodic Hello has been sent. If this router is the DR or
DF at the time of sending the first periodic Hello after
interface activation, then this counter is incremented
(once) at that time.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.3.2 and
I-D.ietf-pim-bidir section 3.5.2"
::= { hwPim 46 }
hwPimRefreshInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval between successive State Refresh messages sent
by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object is
used only by PIM-DM.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 60 }"
REFERENCE "RFC 3973 section 4.8"
::= { hwPim 47 }
hwPimDeviceConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The storage type used for the global PIM configuration of
this device, comprised of the objects listed below. If this
storage type takes the value 'permanent', write-access to
the listed objects need not be allowed.
The objects described by this storage type are:
hwPimKeepalivePeriod, hwPimRegisterSuppressionTime,
hwPimNeighborLossNotificationPeriod,
hwPimInvalidRegisterNotificationPeriod,
hwPimInvalidJoinPruneNotificationPeriod,
hwPimRpMappingNotificationPeriod,
hwPimInterfaceElectionNotificationPeriod,
hwPimRefreshInterval,
hwPimNeighborAddNotificationPeriod.
DEFVAL { nonVolatile }"
::= { hwPim 48 }
hwPimNeighborAddCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new neighbor found events that have occurred.
This counter is incremented when the new neighbor is come up.
This counter is incremented whenever a hwPimNeighborLoss
notification would be generated.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted."
REFERENCE "RFC 4601 section 4.3.2"
::= { hwPim 49 }
hwPimNeighborAddNotificationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time that must elapse between
hwPimNeighborAdd notifications originated by this
router. The maximum value 65535 represents an 'infinite'
time, in which case no hwPimNeighborAdd notifications
are ever sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 0 }"
::= { hwPim 50 }
hwPimGRStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The time when PIM entered GR state."
::= { hwPim 51 }
hwPimGRInterval OBJECT-TYPE
SYNTAX Unsigned32 (90..3600)
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The minimum PIM GR period.
DEFVAL { 120 }"
::= { hwPim 52 }
hwPimGREndTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The time when PIM left the GR state."
::= { hwPim 53 }
hwPimMrtLimitAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of the multicast group address."
::= { hwPim 54 }
hwPimMrtLimitSource OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The source address of the entry."
::= { hwPim 55 }
hwPimMrtLimitGroup OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The group address of the entry."
::= { hwPim 56 }
hwPimInstanceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Instance ID of the trap."
::= { hwPim 57 }
hwPimInstanceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The instance name of the trap."
::= { hwPim 60 }
hwPimNeighborNotificationReason OBJECT-TYPE
SYNTAX INTEGER {
holdTimeExpired(1),
notReceiveHelloForALongTime(2),
interfaceIsDown(3),
receiveHelloAgain(4),
neighbourIsDeleted(5),
alarmTimeOut(6),
receiveHelloHoldTimeZero(7),
bfdSessionDown(8),
userOperation(9),
alarmClear(100)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for trap sending:
1:holdTime expired;
2:Not receive hello for a long time;
3:Interface is down;
4:Receive Hello again;
5:neighbour is deleted;
6:Alarm time out;
7:Receive Hello HoldTime is Zero;
8:Bfd Session is Down;
9:User Operation;
100:Alarm Clear"
::= { hwPim 61 }
hwPimNotificationAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of the multicast group address."
::= { hwPim 62 }
hwPimStarGCurrentCount OBJECT-TYPE
SYNTAX Unsigned32 (0..262144)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The current number of PIM (*, G) entries of all instances."
::= { hwPim 63 }
hwPimStarGTotalCount OBJECT-TYPE
SYNTAX Unsigned32 (0..262144)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The total number of PIM (*, G) entries of all instances."
::= { hwPim 64 }
hwPimStarGThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The threshold value of PIM (*, G) uppper limit(%)."
::= { hwPim 65 }
hwPimSGCurrentCount OBJECT-TYPE
SYNTAX Unsigned32 (0..262144)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The current number of PIM (S, G) entries of all instances."
::= { hwPim 66 }
hwPimSGTotalCount OBJECT-TYPE
SYNTAX Unsigned32 (0..262144)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The total number of PIM (S, G) entries of all instances."
::= { hwPim 67 }
hwPimSGThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The threshold value of PIM (S, G) uppper limit(%)."
::= { hwPim 68 }
hwPimNotificationSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The source address of the entry."
::= { hwPim 69 }
hwPimNotificationGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The group address of the entry."
::= { hwPim 70 }
hwPimNotificationTypeCurrentCount OBJECT-TYPE
SYNTAX Unsigned32 (0..262144)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The current number of PIM specified type entries of all instances."
::= { hwPim 71 }
hwPimNotificationTypeTotalCount OBJECT-TYPE
SYNTAX Unsigned32 (0..262144)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The total number of PIM specified type entries of all instances."
::= { hwPim 72 }
hwPimNotificationTypeLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The threshold value of PIM specified type uppper limit(%)."
::= { hwPim 73 }
hwPimNotificationLimitType OBJECT-TYPE
SYNTAX INTEGER {
sMStarG(1),
sMSG(2),
dMStarG(3),
dMSG(4),
bidirPimStarG(5)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The limit type:
1:SM star-group;
2:SM source-group;
3:DM star-group;
4:DM source-group;
5:bidirPim star-group"
::= { hwPim 74 }
hwPimNotificationLimitUpperThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The upper threshold value of PIM specified type alarm(%)."
::= { hwPim 75 }
hwPimNotificationLimitLowerThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The lower threshold value of PIM specified type alarm(%)."
::= { hwPim 76 }
hwPimNotificationLimitReasonType OBJECT-TYPE
SYNTAX INTEGER {
entryDeleted(1),
configurationChanged(2),
alarmClear(100)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for trap sending:
1:entry is deleted;
2:configuration is changed;
100:Alarm Clear"
::= { hwPim 77 }
hwPimNotificationThresholdReasonType OBJECT-TYPE
SYNTAX INTEGER {
entryCreated(1),
configurationChanged(100)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for trap sending:
1:entry is created;
100:configuration is changed"
::= { hwPim 78 }
hwPimNotificationThresholdClearReasonType OBJECT-TYPE
SYNTAX INTEGER {
entryDeleted(1),
configurationChanged(2),
alarmClear(100)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for trap sending:
1:entry is deleted;
2:configuration is changed;
100:Alarm Clear"
::= { hwPim 79 }
hwPimInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM interfaces.
PIM is enabled on all interfaces listed in this table."
::= { hwPim 1 }
hwPimInterfaceEntry OBJECT-TYPE
SYNTAX HwPimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimInterfaceTable. This
entry is preserved on agent restart."
INDEX { hwPimInterfaceIfIndex,
hwPimInterfaceIpVersion }
::= { hwPimInterfaceTable 1 }
HwPimInterfaceEntry ::= SEQUENCE {
hwPimInterfaceIfIndex InterfaceIndex,
hwPimInterfaceIpVersion InetVersion,
hwPimInterfaceAddressType InetAddressType,
hwPimInterfaceAddress InetAddress,
hwPimInterfaceGenerationIdValue Unsigned32,
hwPimInterfaceDr InetAddress,
hwPimInterfaceDrPriority Unsigned32,
hwPimInterfaceDrPriorityEnabled TruthValue,
hwPimInterfaceHelloInterval Unsigned32,
hwPimInterfaceTrigHelloInterval Unsigned32,
hwPimInterfaceHelloHoldtime Unsigned32,
hwPimInterfaceJoinPruneInterval Unsigned32,
hwPimInterfaceJoinPruneHoldtime Unsigned32,
hwPimInterfaceDfElectionRobustness Unsigned32,
hwPimInterfaceLanDelayEnabled TruthValue,
hwPimInterfacePropagationDelay Unsigned32,
hwPimInterfaceOverrideInterval Unsigned32,
hwPimInterfaceEffectPropagDelay Unsigned32,
hwPimInterfaceEffectOverrideIvl Unsigned32,
hwPimInterfaceSuppressionEnabled TruthValue,
hwPimInterfaceBidirCapable TruthValue,
hwPimInterfaceDomainBorder TruthValue,
hwPimInterfaceStubInterface TruthValue,
hwPimInterfacePruneLimitInterval Unsigned32,
hwPimInterfaceGraftRetryInterval Unsigned32,
hwPimInterfaceSrPriorityEnabled TruthValue,
hwPimInterfaceStatus RowStatus,
hwPimInterfaceStorageType StorageType,
hwPimInterfaceName DisplayString
}
hwPimInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { hwPimInterfaceEntry 1 }
hwPimInterfaceIpVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically
separate."
::= { hwPimInterfaceEntry 2 }
hwPimInterfaceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of this PIM interface."
::= { hwPimInterfaceEntry 3 }
hwPimInterfaceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary IP address of this router on this PIM
interface. The InetAddressType is given by the
hwPimInterfaceAddressType object."
REFERENCE "RFC 4601 sections 4.1.6, 4.3.1-4.3.4 and 4.5.1"
::= { hwPimInterfaceEntry 4 }
hwPimInterfaceGenerationIdValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Generation ID this router inserted in the
last PIM Hello message it sent on this interface."
REFERENCE "RFC 4601 section 4.3.1"
::= { hwPimInterfaceEntry 5 }
hwPimInterfaceDr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary IP address of the Designated Router on this PIM
interface. The InetAddressType is given by the
hwPimInterfaceAddressType object."
REFERENCE "RFC 4601 section 4.3"
::= { hwPimInterfaceEntry 6 }
hwPimInterfaceDrPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Designated Router Priority value inserted into the DR
Priority option on this interface. Numerically higher
values for this object indicate higher priorities."
REFERENCE "RFC 4601 section 4.3.2"
DEFVAL { 1 }
::= { hwPimInterfaceEntry 7 }
hwPimInterfaceDrPriorityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if all routers on this interface are
using the DR Priority option."
REFERENCE "RFC 4601 section 4.3.2"
::= { hwPimInterfaceEntry 8 }
hwPimInterfaceHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..18000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency at which PIM Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
interval, and indicates that periodic PIM Hello messages
should not be sent on this interface."
REFERENCE "RFC 4601 section 9"
DEFVAL { 30 }
::= { hwPimInterfaceEntry 9 }
hwPimInterfaceTrigHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum time before this router sends a triggered PIM
Hello message on this interface. This object corresponds to
the 'Trigered_Hello_Delay' timer value defined in the PIM-SM
specification. A value of zero has no special meaning and
indicates that triggered PIM Hello messages should always be
sent immediately."
REFERENCE "RFC 4601 section 4.11"
DEFVAL { 5 }
::= { hwPimInterfaceEntry 10 }
hwPimInterfaceHelloHoldtime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value set in the Holdtime field of PIM Hello messages
transmitted on this interface. A value of 65535 represents
an 'infinite' holdtime. Implementations are recommended
to use a holdtime that is 3.5 times the value of
hwPimInterfaceHelloInterval, or 65535 if
hwPimInterfaceHelloInterval is set to zero."
REFERENCE "RFC 4601 sections 4.3.2 and 4.9.2"
DEFVAL { 105 }
::= { hwPimInterfaceEntry 11 }
hwPimInterfaceJoinPruneInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..18000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency at which this router sends PIM Join/Prune
messages on this PIM interface. This object corresponds to
the 't_periodic' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
interval, and indicates that periodic PIM Join/Prune
messages should not be sent on this interface."
REFERENCE "RFC 4601 section 4.11"
DEFVAL { 60 }
::= { hwPimInterfaceEntry 12 }
hwPimInterfaceJoinPruneHoldtime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value inserted into the Holdtime field of a PIM
Join/Prune message sent on this interface. A value of 65535
represents an 'infinite' holdtime. Implementations are
recommended to use a holdtime that is 3.5 times the value of
hwPimInterfaceJoinPruneInterval, or 65535 if
hwPimInterfaceJoinPruneInterval is set to zero. PIM-DM
implementations are recommended to use the value of
hwPimInterfacePruneLimitInterval."
REFERENCE "RFC 4601 sections 4.5.3 and 4.9.5"
DEFVAL { 210 }
::= { hwPimInterfaceEntry 13 }
hwPimInterfaceDfElectionRobustness OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum number of PIM DF-Election messages that must be
lost in order for DF election on this interface to fail."
DEFVAL { 3 }
::= { hwPimInterfaceEntry 14 }
hwPimInterfaceLanDelayEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay option."
REFERENCE "RFC 4601 sections 4.3.3 and 4.9.2"
::= { hwPimInterfaceEntry 15 }
hwPimInterfacePropagationDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..32767)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The expected propagation delay between PIM routers on this
network or link.
This router inserts this value into the Propagation_Delay
field of the LAN Prune Delay option in the PIM Hello
messages sent on this interface. Implementations should
enforce a lower bound on the permitted values for this
object to allow for scheduling and processing delays within
the local router."
DEFVAL { 500 }
::= { hwPimInterfaceEntry 16 }
hwPimInterfaceOverrideInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface.
When overriding a prune, PIM routers pick a random timer
duration up to the value of this object. The more PIM
routers that are active on a network, the more likely it is
that the prune will be overridden after a small proportion
of this time has elapsed.
The more PIM routers are active on this network, the larger
this object should be to obtain an optimal spread of prune
override latencies."
REFERENCE "RFC 4601 section 4.3.3"
DEFVAL { 2500 }
::= { hwPimInterfaceEntry 17 }
hwPimInterfaceEffectPropagDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..32767)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Effective Propagation Delay on this interface. This
object is always 500 if hwPimInterfaceLanDelayEnabled is
FALSE."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimInterfaceEntry 18 }
hwPimInterfaceEffectOverrideIvl OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Effective Override Interval on this interface. This
object is always 2500 if hwPimInterfaceLanDelayEnabled is
FALSE."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimInterfaceEntry 19 }
hwPimInterfaceSuppressionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether join suppression is enabled on this interface.
This object is always TRUE if hwPimInterfaceLanDelayEnabled is
FALSE."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimInterfaceEntry 20 }
hwPimInterfaceBidirCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if all routers on this interface are
using the Bidirectional-PIM Capable option."
REFERENCE "I-D.ietf-pim-bidir section 3.2 and 3.7.4"
::= { hwPimInterfaceEntry 21 }
hwPimInterfaceDomainBorder OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether or not this interface is a PIM domain border. This
includes acting as a border for PIM Bootstrap Router (BSR)
messages, if the BSR mechanism is in use."
DEFVAL { false }
::= { hwPimInterfaceEntry 22 }
hwPimInterfaceStubInterface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether this interface is a 'stub interface'. If this
object is set to TRUE, then no PIM packets are sent out this
interface, and any received PIM packets are ignored.
Setting this object to TRUE is a security measure for
interfaces towards untrusted hosts. This allows an
interface to be configured for use with IGMP (Internet Group
Management Protocol) or MLD (Multicast Listener Discovery)
only, which protects the PIM router from forged PIM messages
on the interface.
To communicate with other PIM routers using this interface,
this object must remain set to FALSE.
Changing the value of this object while the interface is
operational causes the interface to be deactivated and
then reactivated."
REFERENCE "RFC 3376, RFC 3810"
DEFVAL { false }
::= { hwPimInterfaceEntry 23 }
hwPimInterfacePruneLimitInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum interval that must transpire between two
successive Prunes sent by a router. This object corresponds
to the 't_limit' timer value defined in the PIM-DM
specification. This object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
DEFVAL { 60 }
::= { hwPimInterfaceEntry 24 }
hwPimInterfaceGraftRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM specification. This object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
DEFVAL { 3 }
::= { hwPimInterfaceEntry 25 }
hwPimInterfaceSrPriorityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM."
::= { hwPimInterfaceEntry 26 }
hwPimInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
This status object can be set to active(1) without setting
any other columnar objects in this entry.
All writeable objects in this entry can be modified when the
status of this entry is active(1)."
::= { hwPimInterfaceEntry 27 }
hwPimInterfaceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row."
DEFVAL { nonVolatile }
::= { hwPimInterfaceEntry 28 }
hwPimInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of this PIM interface."
::= { hwPimInterfaceEntry 29 }
hwPimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM neighbors."
::= { hwPim 2 }
hwPimNeighborEntry OBJECT-TYPE
SYNTAX HwPimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimNeighborTable."
INDEX { hwPimNeighborIfIndex,
hwPimNeighborAddressType,
hwPimNeighborAddress }
::= { hwPimNeighborTable 1 }
HwPimNeighborEntry ::= SEQUENCE {
hwPimNeighborIfIndex InterfaceIndex,
hwPimNeighborAddressType InetAddressType,
hwPimNeighborAddress InetAddress,
hwPimNeighborGenerationIdPresent TruthValue,
hwPimNeighborGenerationIdValue Unsigned32,
hwPimNeighborUpTime TimeTicks,
hwPimNeighborExpiryTime TimeTicks,
hwPimNeighborDrPriorityPresent TruthValue,
hwPimNeighborDrPriority Unsigned32,
hwPimNeighborLanPruneDelayPresent TruthValue,
hwPimNeighborTBit TruthValue,
hwPimNeighborPropagationDelay Unsigned32,
hwPimNeighborOverrideInterval Unsigned32,
hwPimNeighborBidirCapable TruthValue,
hwPimNeighborSrCapable TruthValue,
hwPimNeighborIfName DisplayString
}
hwPimNeighborIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { hwPimNeighborEntry 1 }
hwPimNeighborAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of this PIM neighbor."
::= { hwPimNeighborEntry 2 }
hwPimNeighborAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The primary IP address of this PIM neighbor. The
InetAddressType is given by the hwPimNeighborAddressType
object."
::= { hwPimNeighborEntry 3 }
hwPimNeighborGenerationIdPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this neighbor is using the Generation
ID option."
REFERENCE "RFC 4601 section 4.3.1"
::= { hwPimNeighborEntry 4 }
hwPimNeighborGenerationIdValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Generation ID from the last PIM Hello
message received from this neighbor. This object is always
zero if hwPimNeighborGenerationIdPresent is FALSE."
REFERENCE "RFC 4601 section 4.3.1"
::= { hwPimNeighborEntry 5 }
hwPimNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor
of the local router."
::= { hwPimNeighborEntry 6 }
hwPimNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before this PIM neighbor will
be aged out. The value zero indicates that this PIM
neighbor will never be aged out."
::= { hwPimNeighborEntry 7 }
hwPimNeighborDrPriorityPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this neighbor is using the DR Priority
option."
REFERENCE "RFC 4601 section 4.3.2"
::= { hwPimNeighborEntry 8 }
hwPimNeighborDrPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Designated Router Priority from the last
PIM Hello message received from this neighbor. This object
is always zero if hwPimNeighborDrPriorityPresent is FALSE."
REFERENCE "RFC 4601 section 4.3.2"
::= { hwPimNeighborEntry 9 }
hwPimNeighborLanPruneDelayPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this neighbor is using the LAN Prune
Delay option."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimNeighborEntry 10 }
hwPimNeighborTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the T bit was set in the LAN Prune Delay option
received from this neighbor. The T bit specifies the
ability of the neighbor to disable join suppression. This
object is always TRUE if hwPimNeighborLanPruneDelayPresent is
FALSE."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimNeighborEntry 11 }
hwPimNeighborPropagationDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Propagation_Delay field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if hwPimNeighborLanPruneDelayPresent is FALSE."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimNeighborEntry 12 }
hwPimNeighborOverrideInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Override_Interval field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if hwPimNeighborLanPruneDelayPresent is FALSE."
REFERENCE "RFC 4601 section 4.3.3"
::= { hwPimNeighborEntry 13 }
hwPimNeighborBidirCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this neighbor is using the
Bidirectional-PIM Capable option."
REFERENCE "I-D.ietf-pim-bidir section 3.2 and 3.7.4"
::= { hwPimNeighborEntry 14 }
hwPimNeighborSrCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM."
REFERENCE "RFC 3973 section 4.3.4"
::= { hwPimNeighborEntry 15 }
hwPimNeighborIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name for the interface used to reach this
PIM neighbor."
::= { hwPimNeighborEntry 16 }
hwPimNbrSecAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimNbrSecAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the hwPimNeighborTable defined above)."
REFERENCE "RFC 4601 section 4.3.4"
::= { hwPim 3 }
hwPimNbrSecAddressEntry OBJECT-TYPE
SYNTAX HwPimNbrSecAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimNbrSecAddressTable."
INDEX { hwPimNbrSecAddressIfIndex,
hwPimNbrSecAddressType,
hwPimNbrSecAddressPrimary,
hwPimNbrSecAddress }
::= { hwPimNbrSecAddressTable 1 }
HwPimNbrSecAddressEntry ::= SEQUENCE {
hwPimNbrSecAddressIfIndex InterfaceIndex,
hwPimNbrSecAddressType InetAddressType,
hwPimNbrSecAddressPrimary InetAddress,
hwPimNbrSecAddress InetAddress
}
hwPimNbrSecAddressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { hwPimNbrSecAddressEntry 1 }
hwPimNbrSecAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of this PIM neighbor."
::= { hwPimNbrSecAddressEntry 2 }
hwPimNbrSecAddressPrimary OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The primary IP address of this PIM neighbor. The
InetAddressType is given by the hwPimNbrSecAddressType
object."
::= { hwPimNbrSecAddressEntry 3 }
hwPimNbrSecAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary IP address of this PIM neighbor. The
InetAddressType is given by the hwPimNbrSecAddressType
object."
::= { hwPimNbrSecAddressEntry 4 }
hwPimStarGTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimStarGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the non-interface specific
(*,G) state that PIM has."
REFERENCE "RFC 4601 section 4.1.3"
::= { hwPim 4 }
hwPimStarGEntry OBJECT-TYPE
SYNTAX HwPimStarGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimStarGTable."
INDEX { hwPimStarGAddressType,
hwPimStarGGrpAddress }
::= { hwPimStarGTable 1 }
HwPimStarGEntry ::= SEQUENCE {
hwPimStarGAddressType InetAddressType,
hwPimStarGGrpAddress InetAddress,
hwPimStarGUpTime TimeTicks,
hwPimStarGPimMode HWPimMode,
hwPimStarGRpAddressType InetAddressType,
hwPimStarGRpAddress InetAddress,
hwPimStarGPimModeOrigin HWPimGroupMappingOriginType,
hwPimStarGRpIsLocal TruthValue,
hwPimStarGUpstreamJoinState INTEGER,
hwPimStarGUpstreamJoinTimer TimeTicks,
hwPimStarGUpstreamNeighborType InetAddressType,
hwPimStarGUpstreamNeighbor InetAddress,
hwPimStarGRpfIfIndex InterfaceIndexOrZero,
hwPimStarGRpfNextHopType InetAddressType,
hwPimStarGRpfNextHop InetAddress,
hwPimStarGRpfRouteProtocol IANAipRouteProtocol,
hwPimStarGRpfRouteAddress InetAddress,
hwPimStarGRpfRoutePrefixLength InetAddressPrefixLength,
hwPimStarGRpfRouteMetricPref Unsigned32,
hwPimStarGRpfRouteMetric Unsigned32
}
hwPimStarGAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of this multicast group."
::= { hwPimStarGEntry 1 }
hwPimStarGGrpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address. The InetAddressType is given
by the hwPimStarGAddressType object."
::= { hwPimStarGEntry 2 }
hwPimStarGUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was created by the local router."
::= { hwPimStarGEntry 3 }
hwPimStarGPimMode OBJECT-TYPE
SYNTAX HWPimMode { asm(3), bidir(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this entry represents an ASM (Any Source Multicast,
used with PIM-SM) or BIDIR-PIM group."
::= { hwPimStarGEntry 4 }
hwPimStarGRpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the Rendezvous Point (RP), or
unknown(0) if the RP address is unknown."
::= { hwPimStarGEntry 5 }
hwPimStarGRpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the Rendezvous Point (RP) for the group.
The InetAddressType is given by the hwPimStarGRpAddressType."
::= { hwPimStarGEntry 6 }
hwPimStarGPimModeOrigin OBJECT-TYPE
SYNTAX HWPimGroupMappingOriginType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mechanism by which the PIM mode and RP for the group
were learned."
::= { hwPimStarGEntry 7 }
hwPimStarGRpIsLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router is the RP for the group."
::= { hwPimStarGEntry 8 }
hwPimStarGUpstreamJoinState OBJECT-TYPE
SYNTAX INTEGER {
notJoined (1),
joined (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router should join the RP tree for the
group. This corresponds to the state of the upstream (*,G)
state machine in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.5.6"
::= { hwPimStarGEntry 9 }
hwPimStarGUpstreamJoinTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router next sends a
periodic (*,G) Join message on hwPimStarGRpfIfIndex. This
timer is called the (*,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the timer is not
running."
REFERENCE "RFC 4601 section 4.10"
::= { hwPimStarGEntry 10 }
hwPimStarGUpstreamNeighborType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary address type of the upstream neighbor, or
unknown(0) if the upstream neighbor address is unknown or is
not a PIM neighbor."
::= { hwPimStarGEntry 11 }
hwPimStarGUpstreamNeighbor OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary address of the neighbor on hwPimStarGRpfIfIndex
that the local router is sending periodic (*,G) Join
messages to. The InetAddressType is given by the
hwPimStarGUpstreamNeighborType object. This address is called
RPF'(*,G) in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.1.6"
::= { hwPimStarGEntry 12 }
hwPimStarGRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the RPF interface towards the RP,
or zero if the RPF interface is unknown."
::= { hwPimStarGEntry 13 }
hwPimStarGRpfNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the RPF next hop towards the RP, or
unknown(0) if the RPF next hop is unknown."
::= { hwPimStarGEntry 14 }
hwPimStarGRpfNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the RPF next hop towards the RP. The
InetAddressType is given by the hwPimStarGRpfNextHopType
object. This address is called MRIB.next_hop(RP(G))
in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.5.5"
::= { hwPimStarGEntry 15 }
hwPimStarGRpfRouteProtocol OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the route used to find the
RPF interface towards the RP was learned."
::= { hwPimStarGEntry 16 }
hwPimStarGRpfRouteAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address which when combined with the corresponding
value of hwPimStarGRpfRoutePrefixLength identifies the route
used to find the RPF interface towards the RP. The
InetAddressType is given by the hwPimStarGRpfNextHopType
object.
This address object is only significant up to
hwPimStarGRpfRoutePrefixLength bits. The remainder of the
address bits are zero."
::= { hwPimStarGEntry 17 }
hwPimStarGRpfRoutePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length which when combined with the
corresponding value of hwPimStarGRpfRouteAddress identifies
the route used to find the RPF interface towards the RP.
The InetAddressType is given by the hwPimStarGRpfNextHopType
object."
::= { hwPimStarGEntry 18 }
hwPimStarGRpfRouteMetricPref OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric preference of the route used to find the RPF
interface towards the RP."
::= { hwPimStarGEntry 19 }
hwPimStarGRpfRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing metric of the route used to find the RPF
interface towards the RP."
::= { hwPimStarGEntry 20 }
hwPimStarGITable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimStarGIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the interface-specific (*,G)
state that PIM has."
REFERENCE "RFC 4601 section 4.1.3"
::= { hwPim 5 }
hwPimStarGIEntry OBJECT-TYPE
SYNTAX HwPimStarGIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimStarGITable."
INDEX { hwPimStarGAddressType,
hwPimStarGGrpAddress,
hwPimStarGIIfIndex }
::= { hwPimStarGITable 1 }
HwPimStarGIEntry ::= SEQUENCE {
hwPimStarGIIfIndex InterfaceIndex,
hwPimStarGIUpTime TimeTicks,
hwPimStarGILocalMembership TruthValue,
hwPimStarGIJoinPruneState INTEGER,
hwPimStarGIPrunePendingTimer TimeTicks,
hwPimStarGIJoinExpiryTimer TimeTicks,
hwPimStarGIAssertState INTEGER,
hwPimStarGIAssertTimer TimeTicks,
hwPimStarGIAssertWinnerAddressType InetAddressType,
hwPimStarGIAssertWinnerAddress InetAddress,
hwPimStarGIAssertWinnerMetricPref Unsigned32,
hwPimStarGIAssertWinnerMetric Unsigned32
}
hwPimStarGIIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the interface that this entry corresponds
to."
::= { hwPimStarGIEntry 1 }
hwPimStarGIUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was created by the local router."
::= { hwPimStarGIEntry 2 }
hwPimStarGILocalMembership OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router has (*,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(*,G,I) in the
PIM-SM specification."
REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6"
::= { hwPimStarGIEntry 3 }
hwPimStarGIJoinPruneState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (1),
join (2),
prunePending (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state resulting from (*,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (*,G) state machine in the
PIM-SM specification."
REFERENCE "RFC 4601 section 4.5.2"
::= { hwPimStarGIEntry 4 }
hwPimStarGIPrunePendingTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router acts on a (*,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This timer is called the
(*,G) Prune-Pending Timer in the PIM-SM specification. This
object is zero if the timer is not running."
REFERENCE "RFC 4601 section 4.5.1"
::= { hwPimStarGIEntry 5 }
hwPimStarGIJoinExpiryTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before (*,G) Join state for this
interface expires. This timer is called the (*,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time."
REFERENCE "RFC 4601 section 4.10"
::= { hwPimStarGIEntry 6 }
hwPimStarGIAssertState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (1),
iAmAssertWinner (2),
iAmAssertLoser (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (*,G) Assert state for this interface. This
corresponds to the state of the per-interface (*,G) Assert
state machine in the PIM-SM specification. If
hwPimStarGPimMode is 'bidir', this object must be 'noInfo'."
REFERENCE "RFC 4601 section 4.6.2"
::= { hwPimStarGIEntry 7 }
hwPimStarGIAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimStarGIAssertState is 'iAmAssertWinner', this is the
time remaining before the local router next sends a (*,G)
Assert message on this interface. If hwPimStarGIAssertState
is 'iAmAssertLoser', this is the time remaining before the
(*,G) Assert state expires. If hwPimStarGIAssertState is
'noInfo', this is zero. This timer is called the (*,G)
Assert Timer in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.6.2"
::= { hwPimStarGIEntry 8 }
hwPimStarGIAssertWinnerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimStarGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0)."
::= { hwPimStarGIEntry 9 }
hwPimStarGIAssertWinnerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimStarGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the hwPimStarGIAssertWinnerAddressType object."
::= { hwPimStarGIEntry 10 }
hwPimStarGIAssertWinnerMetricPref OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimStarGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the RP advertised by the
assert winner; otherwise, this object is zero."
::= { hwPimStarGIEntry 11 }
hwPimStarGIAssertWinnerMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimStarGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the RP advertised by the
assert winner; otherwise, this object is zero."
::= { hwPimStarGIEntry 12 }
hwPimSGTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimSGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the non-interface specific
(S,G) state that PIM has."
REFERENCE "RFC 4601 section 4.1.4"
::= { hwPim 6 }
hwPimSGEntry OBJECT-TYPE
SYNTAX HwPimSGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimSGTable."
INDEX { hwPimSGAddressType,
hwPimSGGrpAddress,
hwPimSGSrcAddress }
::= { hwPimSGTable 1 }
HwPimSGEntry ::= SEQUENCE {
hwPimSGAddressType InetAddressType,
hwPimSGGrpAddress InetAddress,
hwPimSGSrcAddress InetAddress,
hwPimSGUpTime TimeTicks,
hwPimSGPimMode HWPimMode,
hwPimSGUpstreamJoinState INTEGER,
hwPimSGUpstreamJoinTimer TimeTicks,
hwPimSGUpstreamNeighbor InetAddress,
hwPimSGRpfIfIndex InterfaceIndexOrZero,
hwPimSGRpfNextHopType InetAddressType,
hwPimSGRpfNextHop InetAddress,
hwPimSGRpfRouteProtocol IANAipRouteProtocol,
hwPimSGRpfRouteAddress InetAddress,
hwPimSGRpfRoutePrefixLength InetAddressPrefixLength,
hwPimSGRpfRouteMetricPref Unsigned32,
hwPimSGRpfRouteMetric Unsigned32,
hwPimSGSptBit TruthValue,
hwPimSGKeepaliveTimer TimeTicks,
hwPimSGDrRegisterState INTEGER,
hwPimSGDrRegisterStopTimer TimeTicks,
hwPimSGRpRegisterPmbrAddressType InetAddressType,
hwPimSGRpRegisterPmbrAddress InetAddress,
hwPimSGUpstreamPruneState INTEGER,
hwPimSGUpstreamPruneLimitTimer TimeTicks,
hwPimSGOriginatorState INTEGER,
hwPimSGSourceActiveTimer TimeTicks,
hwPimSGStateRefreshTimer TimeTicks
}
hwPimSGAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of the source and multicast group for this
entry."
::= { hwPimSGEntry 1 }
hwPimSGGrpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address for this entry. The
InetAddressType is given by the hwPimSGAddressType object."
::= { hwPimSGEntry 2 }
hwPimSGSrcAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address for this entry. The InetAddressType is
given by the hwPimSGAddressType object."
::= { hwPimSGEntry 3 }
hwPimSGUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was created by the local router."
::= { hwPimSGEntry 4 }
hwPimSGPimMode OBJECT-TYPE
SYNTAX HWPimMode { ssm(2), asm(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether hwPimSGGrpAddress is an SSM (Source Specific
Multicast, used with PIM-SM) or ASM (Any Source Multicast,
used with PIM-SM) group."
REFERENCE "RFC 4601 section 4.5.2, RFC 3569 and
I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable"
::= { hwPimSGEntry 5 }
hwPimSGUpstreamJoinState OBJECT-TYPE
SYNTAX INTEGER {
notJoined (1),
joined (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router should join the shortest-path tree
for the source and group represented by this entry. This
corresponds to the state of the upstream (S,G) state machine
in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.5.7"
::= { hwPimSGEntry 6 }
hwPimSGUpstreamJoinTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router next sends a
periodic (S,G) Join message on hwPimSGRpfIfIndex. This timer
is called the (S,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the timer is not
running."
REFERENCE "RFC 4601 section 4.10 and 4.11"
::= { hwPimSGEntry 7 }
hwPimSGUpstreamNeighbor OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary address of the neighbor on hwPimSGRpfIfIndex that
the local router is sending periodic (S,G) Join messages to.
This is zero if the RPF next hop is unknown or is not a
PIM neighbor. The InetAddressType is given by the
hwPimSGAddressType object. This address is called RPF'(S,G)
in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.1.6"
::= { hwPimSGEntry 8 }
hwPimSGRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the RPF interface towards the
source, or zero if the RPF interface is unknown."
::= { hwPimSGEntry 9 }
hwPimSGRpfNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the RPF next hop towards the source, or
unknown(0) if the RPF next hop is unknown."
::= { hwPimSGEntry 10 }
hwPimSGRpfNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the RPF next hop towards the source. The
InetAddressType is given by the hwPimSGRpfNextHopType. This
address is called MRIB.next_hop(S) in the PIM-SM
specification."
REFERENCE "RFC 4601 section 4.5.5"
::= { hwPimSGEntry 11 }
hwPimSGRpfRouteProtocol OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the route used to find the
RPF interface towards the source was learned."
::= { hwPimSGEntry 12 }
hwPimSGRpfRouteAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address which when combined with the corresponding
value of hwPimSGRpfRoutePrefixLength identifies the route used
to find the RPF interface towards the source. The
InetAddressType is given by the hwPimSGRpfNextHopType object.
This address object is only significant up to
hwPimSGRpfRoutePrefixLength bits. The remainder of the
address bits are zero."
::= { hwPimSGEntry 13 }
hwPimSGRpfRoutePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length which when combined with the
corresponding value of hwPimSGRpfRouteAddress identifies the
route used to find the RPF interface towards the source.
The InetAddressType is given by the hwPimSGRpfNextHopType
object."
::= { hwPimSGEntry 14 }
hwPimSGRpfRouteMetricPref OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric preference of the route used to find the RPF
interface towards the source."
::= { hwPimSGEntry 15 }
hwPimSGRpfRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing metric of the route used to find the RPF
interface towards the source."
::= { hwPimSGEntry 16 }
hwPimSGSptBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the SPT bit is set; and therefore whether
forwarding is taking place on the shortest-path tree."
::= { hwPimSGEntry 17 }
hwPimSGKeepaliveTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before, in the absence of explicit (S,G)
local membership or (S,G) Join messages received to maintain
it, this (S,G) state expires. This timer is called the
(S,G) Keepalive Timer in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.1.4"
::= { hwPimSGEntry 18 }
hwPimSGDrRegisterState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (1),
join (2),
joinPending (3),
prune (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router should encapsulate (S,G) data
packets in Register messages and send them to the RP. This
corresponds to the state of the per-(S,G) Register state
machine in the PIM-SM specification. This object is always
'noInfo' unless hwPimSGPimMode is 'asm'."
REFERENCE "RFC 4601 section 4.4.1"
::= { hwPimSGEntry 19 }
hwPimSGDrRegisterStopTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGDrRegisterState is 'prune', this is the time
remaining before the local router sends a Null-Register
message to the RP. If hwPimSGDrRegisterState is
'joinPending', this is the time remaining before the local
router resumes encapsulating data packets and sending them
to the RP. Otherwise, this is zero. This timer is called
the Register-Stop Timer in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.4"
::= { hwPimSGEntry 20 }
hwPimSGRpRegisterPmbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the first PIM Multicast Border Router
to send a Register message with the Border bit set. This
object is unknown(0) if the local router is not the RP for
the group."
::= { hwPimSGEntry 21 }
hwPimSGRpRegisterPmbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the first PIM Multicast Border Router to
send a Register message with the Border bit set. The
InetAddressType is given by the
hwPimSGRpRegisterPmbrAddressType object."
::= { hwPimSGEntry 22 }
hwPimSGUpstreamPruneState OBJECT-TYPE
SYNTAX INTEGER {
forwarding (1),
ackpending (2),
pruned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router has pruned itself from the tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only by PIM-DM."
REFERENCE "RFC 3973 section 4.4.1"
::= { hwPimSGEntry 23 }
hwPimSGUpstreamPruneLimitTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router may send a (S,G)
Prune message on hwPimSGRpfIfIndex. This timer is called the
(S,G) Prune Limit Timer in the PIM-DM specification. This
object is zero if the timer is not running. This object is
used only by PIM-DM."
REFERENCE "RFC 2973 section 4.8"
::= { hwPimSGEntry 24 }
hwPimSGOriginatorState OBJECT-TYPE
SYNTAX INTEGER {
notOriginator (1),
originator (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the router is an originator for an (S,G) message
flow. This corresponds to the state of the per-(S,G)
Originator state machine in the PIM-DM specification. This
object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.5.2"
::= { hwPimSGEntry 25 }
hwPimSGSourceActiveTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGOriginatorState is 'originator', this is the time
remaining before the local router reverts to a notOriginator
state. Otherwise, this is zero. This timer is called the
Source Active Timer in the PIM-DM specification. This
object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
::= { hwPimSGEntry 26 }
hwPimSGStateRefreshTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGOriginatorState is 'originator', this is the time
remaining before the local router sends a State Refresh
message. Otherwise, this is zero. This timer is called the
State Refresh Timer in the PIM-DM specification. This
object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
::= { hwPimSGEntry 27 }
hwPimSGITable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimSGIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the interface-specific (S,G)
state that PIM has."
REFERENCE "RFC 4601 section 4.1.4"
::= { hwPim 7 }
hwPimSGIEntry OBJECT-TYPE
SYNTAX HwPimSGIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimSGITable."
INDEX { hwPimSGAddressType,
hwPimSGGrpAddress,
hwPimSGSrcAddress,
hwPimSGIIfIndex }
::= { hwPimSGITable 1 }
HwPimSGIEntry ::= SEQUENCE {
hwPimSGIIfIndex InterfaceIndex,
hwPimSGIUpTime TimeTicks,
hwPimSGILocalMembership TruthValue,
hwPimSGIJoinPruneState INTEGER,
hwPimSGIPrunePendingTimer TimeTicks,
hwPimSGIJoinExpiryTimer TimeTicks,
hwPimSGIAssertState INTEGER,
hwPimSGIAssertTimer TimeTicks,
hwPimSGIAssertWinnerAddressType InetAddressType,
hwPimSGIAssertWinnerAddress InetAddress,
hwPimSGIAssertWinnerMetricPref Unsigned32,
hwPimSGIAssertWinnerMetric Unsigned32
}
hwPimSGIIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the interface that this entry corresponds
to."
::= { hwPimSGIEntry 1 }
hwPimSGIUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was created by the local router."
::= { hwPimSGIEntry 2 }
hwPimSGILocalMembership OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router has (S,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(S,G,I) in the
PIM-SM specification."
REFERENCE "RFC 3376, RFC 3810, RFC 4601 sections 4.1.6, 4.6.1 and
4.6.2"
::= { hwPimSGIEntry 3 }
hwPimSGIJoinPruneState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (1),
join (2),
prunePending (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state resulting from (S,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G) state machine in the
PIM-SM and PIM-DM specification."
REFERENCE "RFC 4601 section 4.5.3 and RFC 3973 section 4.4.2"
::= { hwPimSGIEntry 4 }
hwPimSGIPrunePendingTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router acts on an (S,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This timer is called the
(S,G) Prune-Pending Timer in the PIM-SM specification. This
object is zero if the timer is not running."
REFERENCE "RFC 4601 section 4.5.3 and 4.5.4"
::= { hwPimSGIEntry 5 }
hwPimSGIJoinExpiryTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before (S,G) Join state for this
interface expires. This timer is called the (S,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time. This timer is called the
(S,G) Prune Timer in the PIM-DM specification."
REFERENCE "RFC 4601 section 4.10 and RFC 3973 section 4.8"
::= { hwPimSGIEntry 6 }
hwPimSGIAssertState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (1),
iAmAssertWinner (2),
iAmAssertLoser (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (S,G) Assert state for this interface. This
corresponds to the state of the per-interface (S,G) Assert
state machine in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.6.1"
::= { hwPimSGIEntry 7 }
hwPimSGIAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGIAssertState is 'iAmAssertWinner', this is the time
remaining before the local router next sends a (S,G) Assert
message on this interface. If hwPimSGIAssertState is
'iAmAssertLoser', this is the time remaining before the
(S,G) Assert state expires. If hwPimSGIAssertState is
'noInfo', this is zero. This timer is called the (S,G)
Assert Timer in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.6.1"
::= { hwPimSGIEntry 8 }
hwPimSGIAssertWinnerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0)."
::= { hwPimSGIEntry 9 }
hwPimSGIAssertWinnerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the hwPimSGIAssertWinnerAddressType object."
::= { hwPimSGIEntry 10 }
hwPimSGIAssertWinnerMetricPref OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the source advertised by
the assert winner; otherwise, this object is zero."
::= { hwPimSGIEntry 11 }
hwPimSGIAssertWinnerMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwPimSGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the source advertised by the
assert winner; otherwise, this object is zero."
::= { hwPimSGIEntry 12 }
hwPimSGRptTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimSGRptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the non-interface specific
(S,G,rpt) state that PIM has."
REFERENCE "RFC 4601 section 4.1.5"
::= { hwPim 8 }
hwPimSGRptEntry OBJECT-TYPE
SYNTAX HwPimSGRptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimSGRptTable."
INDEX { hwPimStarGAddressType,
hwPimStarGGrpAddress,
hwPimSGRptSrcAddress }
::= { hwPimSGRptTable 1 }
HwPimSGRptEntry ::= SEQUENCE {
hwPimSGRptSrcAddress InetAddress,
hwPimSGRptUpTime TimeTicks,
hwPimSGRptUpstreamPruneState INTEGER,
hwPimSGRptUpstreamOverrideTimer TimeTicks
}
hwPimSGRptSrcAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address for this entry. The InetAddressType is
given by the hwPimStarGAddressType object."
::= { hwPimSGRptEntry 1 }
hwPimSGRptUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was created by the local router."
::= { hwPimSGRptEntry 2 }
hwPimSGRptUpstreamPruneState OBJECT-TYPE
SYNTAX INTEGER {
rptNotJoined (1),
pruned (2),
notPruned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router should prune the source off the RP
tree. This corresponds to the state of the upstream
(S,G,rpt) state machine for triggered messages in the PIM-SM
specification."
REFERENCE "RFC 4601 section 4.5.9"
::= { hwPimSGRptEntry 3 }
hwPimSGRptUpstreamOverrideTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router sends a
triggered (S,G,rpt) Join message on hwPimStarGRpfIfIndex.
This timer is called the (S,G,rpt) Upstream Override Timer
in the PIM-SM specification. This object is zero if the
timer is not running."
REFERENCE "RFC 4601 section 4.5.9"
::= { hwPimSGRptEntry 4 }
hwPimSGRptITable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimSGRptIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the interface-specific
(S,G,rpt) state that PIM has."
REFERENCE "RFC 4601 section 4.1.5"
::= { hwPim 9 }
hwPimSGRptIEntry OBJECT-TYPE
SYNTAX HwPimSGRptIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimSGRptITable."
INDEX { hwPimStarGAddressType,
hwPimStarGGrpAddress,
hwPimSGRptSrcAddress,
hwPimSGRptIIfIndex }
::= { hwPimSGRptITable 1 }
HwPimSGRptIEntry ::= SEQUENCE {
hwPimSGRptIIfIndex InterfaceIndex,
hwPimSGRptIUpTime TimeTicks,
hwPimSGRptILocalMembership TruthValue,
hwPimSGRptIJoinPruneState INTEGER,
hwPimSGRptIPrunePendingTimer TimeTicks,
hwPimSGRptIPruneExpiryTimer TimeTicks
}
hwPimSGRptIIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the interface that this entry corresponds
to."
::= { hwPimSGRptIEntry 1 }
hwPimSGRptIUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was created by the local router."
::= { hwPimSGRptIEntry 2 }
hwPimSGRptILocalMembership OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router has both (*,G) include local
membership and (S,G) exclude local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_exclude(S,G,I) in the
PIM-SM specification."
REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6"
::= { hwPimSGRptIEntry 3 }
hwPimSGRptIJoinPruneState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (1),
prune (2),
prunePending (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state resulting from (S,G,rpt) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G,rpt) state machine in
the PIM-SM specification."
REFERENCE "RFC 4601 section 4.5.4"
::= { hwPimSGRptIEntry 4 }
hwPimSGRptIPrunePendingTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router starts pruning
this source off the RP tree. This timer is called the
(S,G,rpt) Prune-Pending Timer in the PIM-SM specification.
This object is zero if the timer is not running."
REFERENCE "RFC 4601 section 4.5.4"
::= { hwPimSGRptIEntry 5 }
hwPimSGRptIPruneExpiryTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before (S,G,rpt) Prune state for this
interface expires. This timer is called the (S,G,rpt)
Prune Expiry Timer in the PIM-SM specification. This object
is zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time."
REFERENCE "RFC 4601 section 4.5.4"
::= { hwPimSGRptIEntry 6 }
hwPimGroupMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimGroupMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing mappings from multicast
group prefixes to the PIM mode and RP address to use for
groups within that group prefix.
Rows in this table are created for a variety of reasons,
indicated by the value of the hwPimGroupMappingOrigin object.
- Rows with a hwPimGroupMappingOrigin value of 'fixed' are
created automatically by the router at startup, to
correspond to the well-defined prefixes of link-local and
unroutable group addresses. These rows are never
destroyed.
- Rows with a hwPimGroupMappingOrigin value of 'embedded' are
created by the router to correspond to group prefixes
that are to be treated as being in Embedded-RP format.
- Rows with a hwPimGroupMappingOrigin value of 'configRp' are
created and destroyed as a result of rows in the
pimStaticRPTable being created and destroyed.
- Rows with a hwPimGroupMappingOrigin value of 'configSsm'
are created and destroyed as a result of configuration of
SSM address ranges to the local router.
- Rows with a hwPimGroupMappingOrigin value of 'bsr' are
created as a result of running the PIM Bootstrap Router
(BSR) mechanism. If the local router is not the elected
BSR, these rows are created to correspond to group
prefixes in the PIM Bootstrap messages received from the
elected BSR. If the local router is the elected BSR,
these rows are created to correspond to group prefixes in
the PIM Bootstrap messages that the local router sends.
In either case, these rows are destroyed when the group
prefixes are timed out by the BSR mechanism.
- Rows with a hwPimGroupMappingOrigin value of 'other' are
created and destroyed according to some other mechanism
not specified here.
Given the collection of rows in this table at any point in
time, the PIM mode and RP address to use for a particular
group is determined using the following algorithm.
1. From the set of all rows, the subset whose group prefix
contains the group in question are selected.
2. If there are no such rows, the behavior is undefined.
3. From the selected subset of rows, the subset that have
the greatest value of hwPimGroupMappingGrpPrefixLength are
selected.
4. If there are multiple selected rows, and a subset are
defined by pimStaticRPTable (hwPimGroupMappingOrigin value
of 'configRp') with pimStaticRPOverrideDynamic set to
TRUE, then this subset is selected.
5. If there are still multiple selected rows, the subset
that have the highest precedence (the lowest numerical
value for hwPimGroupMappingPrecedence) are selected.
6. If there are still multiple selected rows, the row
selected is implementation dependent; the implementation
might or might not apply the PIM hash function to select
the row.
7. The group mode to use is given by the value of
hwPimGroupMappingPimMode from the single selected row; the
RP to use is given by the value of
hwPimGroupMappingRpAddress, unless hwPimGroupMappingOrigin is
'embedded', in which case the RP is extracted from the
group address in question."
REFERENCE "RFC 4601 section 3.7, RFC 3956 and RFC 4610"
::= { hwPim 13 }
hwPimGroupMappingEntry OBJECT-TYPE
SYNTAX HwPimGroupMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimGroupMappingTable."
INDEX { hwPimGroupMappingOrigin,
hwPimGroupMappingAddressType,
hwPimGroupMappingGrpAddress,
hwPimGroupMappingGrpPrefixLength,
hwPimGroupMappingRpAddressType,
hwPimGroupMappingRpAddress }
::= { hwPimGroupMappingTable 1 }
HwPimGroupMappingEntry ::= SEQUENCE {
hwPimGroupMappingOrigin HWPimGroupMappingOriginType,
hwPimGroupMappingAddressType InetAddressType,
hwPimGroupMappingGrpAddress InetAddress,
hwPimGroupMappingGrpPrefixLength InetAddressPrefixLength,
hwPimGroupMappingRpAddressType InetAddressType,
hwPimGroupMappingRpAddress InetAddress,
hwPimGroupMappingPimMode HWPimMode,
hwPimGroupMappingPrecedence Unsigned32
}
hwPimGroupMappingOrigin OBJECT-TYPE
SYNTAX HWPimGroupMappingOriginType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mechanism by which this group mapping was learned."
::= { hwPimGroupMappingEntry 1 }
hwPimGroupMappingAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of the IP multicast group prefix."
::= { hwPimGroupMappingEntry 2 }
hwPimGroupMappingGrpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
hwPimGroupMappingGrpPrefixLength, gives the group prefix for
this mapping. The InetAddressType is given by the
hwPimGroupMappingAddressType object.
This address object is only significant up to
hwPimGroupMappingGrpPrefixLength bits. The remainder of the
address bits are zero. This is especially important for
this index field, which is part of the index of this entry.
Any non-zero bits would signify an entirely different
entry."
::= { hwPimGroupMappingEntry 3 }
hwPimGroupMappingGrpPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength (4..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group prefix length, which, when combined
with hwPimGroupMappingGrpAddress, gives the group prefix for
this mapping. The InetAddressType is given by the
hwPimGroupMappingAddressType object. If
hwPimGroupMappingAddressType is 'ipv4' or 'ipv4z', this
object must be in the range 4..32. If
hwPimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object
must be in the range 8..128."
::= { hwPimGroupMappingEntry 4 }
hwPimGroupMappingRpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of the RP to be used for groups within
this group prefix, or unknown(0) if no RP is to be used or
if the RP address is unknown. This object must be
unknown(0) if hwPimGroupMappingPimMode is ssm(2), or if
hwPimGroupMappingOrigin is embedded(6)."
::= { hwPimGroupMappingEntry 5 }
hwPimGroupMappingRpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
hwPimGroupMappingRpAddressType object."
::= { hwPimGroupMappingEntry 6 }
hwPimGroupMappingPimMode OBJECT-TYPE
SYNTAX HWPimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PIM mode to be used for groups in this group prefix."
::= { hwPimGroupMappingEntry 7 }
hwPimGroupMappingPrecedence OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The precedence of this row, used in the algorithm that
determines which row applies to a given group address
(described above). Numerically higher values for this
object indicate lower precedences, with the value zero
denoting the highest precedence.
The absolute values of this object have a significance only
on the local router and do not need to be coordinated with
other routers."
::= { hwPimGroupMappingEntry 8 }
hwPimInterfaceCtlMsgCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimInterfaceCtlMsgCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the control message counter
of all PIM interfaces."
::= { hwPim 58}
hwPimInterfaceCtlMsgCountEntry OBJECT-TYPE
SYNTAX HwPimInterfaceCtlMsgCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimCtlMsgCountTable.
This entry is preserved on agent restart."
INDEX { hwPimInterfaceCtlMsgCountIfIndex,
hwPimInterfaceCtlMsgCountIpVersion,
hwPimInterfaceCtlMsgCountMsgState }
::= { hwPimInterfaceCtlMsgCountTable 1 }
HwPimInterfaceCtlMsgCountEntry ::= SEQUENCE {
hwPimInterfaceCtlMsgCountIfIndex InterfaceIndex,
hwPimInterfaceCtlMsgCountIpVersion InetVersion,
hwPimInterfaceCtlMsgCountMsgState HWPimCtlMsgState,
hwPimInterfaceCtlMsgCountAssert Unsigned32,
hwPimInterfaceCtlMsgCountHello Unsigned32,
hwPimInterfaceCtlMsgCountJoinPrune Unsigned32,
hwPimInterfaceCtlMsgCountBsr Unsigned32
}
hwPimInterfaceCtlMsgCountIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { hwPimInterfaceCtlMsgCountEntry 1 }
hwPimInterfaceCtlMsgCountIpVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically
separate."
::= { hwPimInterfaceCtlMsgCountEntry 2 }
hwPimInterfaceCtlMsgCountMsgState OBJECT-TYPE
SYNTAX HWPimCtlMsgState
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PIM control message state."
::= { hwPimInterfaceCtlMsgCountEntry 3 }
hwPimInterfaceCtlMsgCountAssert OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM Assert messages on this interface."
::= { hwPimInterfaceCtlMsgCountEntry 4 }
hwPimInterfaceCtlMsgCountHello OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM Hello messages on this interface."
::= { hwPimInterfaceCtlMsgCountEntry 5 }
hwPimInterfaceCtlMsgCountJoinPrune OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM Join/Prune messages on this interface."
::= { hwPimInterfaceCtlMsgCountEntry 6 }
hwPimInterfaceCtlMsgCountBsr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM BSR messages on this interface."
::= { hwPimInterfaceCtlMsgCountEntry 7 }
hwPimGlobalCtlMsgCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPimGlobalCtlMsgCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the control message counter on the router."
::= { hwPim 59 }
hwPimGlobalCtlMsgCountEntry OBJECT-TYPE
SYNTAX HwPimGlobalCtlMsgCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the hwPimGlobalCtlMsgCountTable.
This entry is preserved on agent restart."
INDEX { hwPimGlobalCtlMsgCountIpVersion,
hwPimGlobalCtlMsgCountMsgState }
::= { hwPimGlobalCtlMsgCountTable 1 }
HwPimGlobalCtlMsgCountEntry ::= SEQUENCE {
hwPimGlobalCtlMsgCountIpVersion InetVersion,
hwPimGlobalCtlMsgCountMsgState HWPimCtlMsgState,
hwPimGlobalCtlMsgCountRegister Unsigned32,
hwPimGlobalCtlMsgCountRegisterStop Unsigned32,
hwPimGlobalCtlMsgCountProbe Unsigned32,
hwPimGlobalCtlMsgCountCrp Unsigned32
}
hwPimGlobalCtlMsgCountIpVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP version of this PIM instance, e.g. IPv4
and IPv6."
::= { hwPimGlobalCtlMsgCountEntry 1 }
hwPimGlobalCtlMsgCountMsgState OBJECT-TYPE
SYNTAX HWPimCtlMsgState
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PIM control message state."
::= { hwPimGlobalCtlMsgCountEntry 2 }
hwPimGlobalCtlMsgCountRegister OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM Register messages on the router."
::= { hwPimGlobalCtlMsgCountEntry 3 }
hwPimGlobalCtlMsgCountRegisterStop OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM Register-stop messages on the router."
::= { hwPimGlobalCtlMsgCountEntry 4 }
hwPimGlobalCtlMsgCountProbe OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM Probe messages on the router."
::= { hwPimGlobalCtlMsgCountEntry 5 }
hwPimGlobalCtlMsgCountCrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM CRP messages on the router."
::= { hwPimGlobalCtlMsgCountEntry 6 }
hwPimNeighborLoss NOTIFICATION-TYPE
OBJECTS { hwPimNeighborUpTime,
hwPimNeighborIfName,
hwPimInstanceID,
hwPimInstanceName,
hwPimNeighborNotificationReason
}
STATUS current
DESCRIPTION
"A hwPimNeighborLoss notification signifies the loss of an
adjacency with a neighbor. This notification should be
generated when the neighbor is lost.
This notification is generated whenever the counter
hwPimNeighborLossCount is incremented, subject
to the rate limit specified by
hwPimNeighborLossNotificationPeriod."
REFERENCE "RFC 4601 section 4.3.2"
::= { hwPimNotifications 1 }
hwPimInvalidRegister NOTIFICATION-TYPE
OBJECTS { hwPimGroupMappingPimMode,
hwPimInvalidRegisterAddressType,
hwPimInvalidRegisterOrigin,
hwPimInvalidRegisterGroup,
hwPimInvalidRegisterRp,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimInvalidRegister notification signifies that an invalid
PIM Register message was received by this device.
This notification is generated whenever the counter
hwPimInvalidRegisterMsgsRcvd is incremented, subject to the
rate limit specified by
hwPimInvalidRegisterNotificationPeriod."
REFERENCE "RFC 4601 section 4.4.2"
::= { hwPimNotifications 2 }
hwPimInvalidJoinPrune NOTIFICATION-TYPE
OBJECTS { hwPimGroupMappingPimMode,
hwPimInvalidJoinPruneAddressType,
hwPimInvalidJoinPruneOrigin,
hwPimInvalidJoinPruneGroup,
hwPimInvalidJoinPruneRp,
hwPimNeighborUpTime,
hwPimNeighborIfName,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimInvalidJoinPrune notification signifies that an
invalid PIM Join/Prune message was received by this device.
This notification is generated whenever the counter
hwPimInvalidJoinPruneMsgsRcvd is incremented, subject to the
rate limit specified by
hwPimInvalidJoinPruneNotificationPeriod."
REFERENCE "RFC 4601 section 4.5.2"
::= { hwPimNotifications 3 }
hwPimRpMappingChange NOTIFICATION-TYPE
OBJECTS { hwPimGroupMappingPimMode,
hwPimGroupMappingPrecedence,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimRpMappingChange notification signifies a change to the
active RP mapping on this device.
This notification is generated whenever the counter
hwPimRpMappingChangeCount is incremented, subject to the
rate limit specified by
pimRPMappingChangeNotificationPeriod."
::= { hwPimNotifications 4 }
hwPimInterfaceElection NOTIFICATION-TYPE
OBJECTS { hwPimInterfaceAddressType,
hwPimInterfaceAddress,
hwPimInterfaceName,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimInterfaceElection notification signifies that a new DR
or DF has been elected on a network.
This notification is generated whenever the counter
hwPimInterfaceElectionWinCount is incremented, subject to the
rate limit specified by
hwPimInterfaceElectionNotificationPeriod."
REFERENCE "RFC 4601 section 4.3.2 and
I-D.ietf-pim-bidir section 3.5.2"
::= { hwPimNotifications 5 }
hwPimNeighborAdd NOTIFICATION-TYPE
OBJECTS { hwPimNeighborExpiryTime,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimNeighborAdd notification signifies the new neighbor.
This notification should be generated when receiving the hello
report of a new neighbor.
This notification is generated whenever the counter
hwPimNeighborAddCount is incremented, subject
to the rate limit specified by
hwPimNeighborAddNotificationPeriod."
REFERENCE "RFC 4601 section 4.3.1"
::= { hwPimNotifications 6 }
hwPimGRStart NOTIFICATION-TYPE
OBJECTS { hwPimGRStartTime,
hwPimGRInterval,
hwPimInstanceID
}
STATUS obsolete
DESCRIPTION
"A hwPimGRStart notification signifies that the router enters
the PIM GR state."
::= { hwPimNotifications 7 }
hwPimGREnd NOTIFICATION-TYPE
OBJECTS { hwPimGREndTime,
hwPimInstanceID
}
STATUS obsolete
DESCRIPTION
"A hwPimGREnd notification signifies that the router leaves
the PIM GR state."
::= { hwPimNotifications 8 }
hwPimMrtLimit NOTIFICATION-TYPE
OBJECTS { hwPimMrtLimitAddressType,
hwPimMrtLimitSource,
hwPimMrtLimitGroup,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimMrtLimit notification signifies that PIM entries cannot be
created because the upper limit is crossed."
::= { hwPimNotifications 9 }
hwPimNeighborUnavailable NOTIFICATION-TYPE
OBJECTS { hwPimNeighborIfName,
hwPimInstanceID,
hwPimInstanceName,
hwPimNeighborNotificationReason
}
STATUS current
DESCRIPTION
"A hwPimNeighborUnavailable notification signifies that the PIM neighbor is unavailable."
::= { hwPimNotifications 10 }
hwPimNeighborUnavailableClear NOTIFICATION-TYPE
OBJECTS { hwPimNeighborIfName,
hwPimInstanceID,
hwPimInstanceName,
hwPimNeighborNotificationReason
}
STATUS current
DESCRIPTION
"A hwPimNeighborUnavailableClear notification signifies that the PIM neighbor is available."
::= { hwPimNotifications 11 }
hwPimMrtLimitClear NOTIFICATION-TYPE
OBJECTS { hwPimMrtLimitAddressType,
hwPimMrtLimitSource,
hwPimMrtLimitGroup,
hwPimInstanceID,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimMrtLimit notification signifies that PIM entries can created."
::= { hwPimNotifications 12 }
hwPimStarGThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType,
hwPimStarGCurrentCount,
hwPimStarGThreshold,
hwPimStarGTotalCount
}
STATUS current
DESCRIPTION
"A hwPimStarGThresholdExceed notification signifies that PIM (*, G) entries count of all instances reached the upper threshold."
::= { hwPimNotifications 13 }
hwPimStarGThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType,
hwPimStarGCurrentCount,
hwPimStarGThreshold,
hwPimStarGTotalCount
}
STATUS current
DESCRIPTION
"A hwPimStarGThresholdExceedClear notification signifies that PIM (*, G) entries count of all instances fell below the lower threshold."
::= { hwPimNotifications 14 }
hwPimStarGExceed NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType,
hwPimNotificationSrcAddr,
hwPimNotificationGrpAddr,
hwPimStarGTotalCount,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimStarGExceed notification signifies that PIM (*, G) entries count of all instances reached the limit."
::= { hwPimNotifications 15 }
hwPimStarGExceedClear NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType
}
STATUS current
DESCRIPTION
"A hwPimStarGExceedClear notification signifies that PIM(*, G) entries count of all instances fell below the limit."
::= { hwPimNotifications 16 }
hwPimSGThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType,
hwPimSGCurrentCount,
hwPimSGThreshold,
hwPimSGTotalCount
}
STATUS current
DESCRIPTION
"A hwPimSGThresholdExceed notification signifies that PIM (S, G) entries count of all instances reached the upper threshold."
::= { hwPimNotifications 17 }
hwPimSGThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType,
hwPimSGCurrentCount,
hwPimSGThreshold,
hwPimSGTotalCount
}
STATUS current
DESCRIPTION
"A hwPimSGThresholdExceedClear notification signifies that PIM (S, G) entries count of all instances fell below the lower threshold."
::= { hwPimNotifications 18 }
hwPimSGExceed NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType,
hwPimNotificationSrcAddr,
hwPimNotificationGrpAddr,
hwPimSGTotalCount,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimSGExceed notification signifies that PIM (S, G) entries count of all instances reached the limit."
::= { hwPimNotifications 19 }
hwPimSGExceedClear NOTIFICATION-TYPE
OBJECTS { hwPimNotificationAddressType
}
STATUS current
DESCRIPTION
"A hwPimSGExceedClear notification signifies that the number of PIM(S, G) entries count of all instances fell below the limit."
::= { hwPimNotifications 20 }
hwPimGlobalTypeSGThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwPimNotificationLimitType,
hwPimNotificationAddressType,
hwPimNotificationTypeTotalCount,
hwPimNotificationLimitUpperThreshold,
hwPimNotificationThresholdReasonType
}
STATUS current
DESCRIPTION
"A hwPimGlobalTypeSGThresholdExceed notification signifies that PIM specified type entries count of all instances reached the upper threshold."
::= { hwPimNotifications 21 }
hwPimGlobalTypeSGThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwPimNotificationLimitType,
hwPimNotificationAddressType,
hwPimNotificationTypeTotalCount,
hwPimNotificationLimitLowerThreshold,
hwPimNotificationThresholdClearReasonType
}
STATUS current
DESCRIPTION
"A hwPimGlobalTypeSGThresholdExceedClear notification signifies that PIM specified type entries count of all instances fell below the lower threshold."
::= { hwPimNotifications 22 }
hwPimGlobalTypeSGExceed NOTIFICATION-TYPE
OBJECTS { hwPimNotificationLimitType,
hwPimNotificationAddressType,
hwPimNotificationTypeTotalCount,
hwPimNotificationTypeLimit,
hwPimNotificationSrcAddr,
hwPimNotificationGrpAddr,
hwPimInstanceName
}
STATUS current
DESCRIPTION
"A hwPimGlobalTypeSGExceed notification signifies that PIM specified type entries count of all instances reached the limit."
::= { hwPimNotifications 23 }
hwPimGlobalTypeSGExceedClear NOTIFICATION-TYPE
OBJECTS { hwPimNotificationLimitType,
hwPimNotificationAddressType,
hwPimNotificationTypeTotalCount,
hwPimNotificationTypeLimit,
hwPimNotificationSrcAddr,
hwPimNotificationGrpAddr,
hwPimInstanceName,
hwPimNotificationLimitReasonType
}
STATUS current
DESCRIPTION
"A hwPimGlobalTypeSGExceedClear notification signifies that the number of PIM specified type entries count of all instances fell below the limit."
::= { hwPimNotifications 24 }
hwPimMibConformance OBJECT IDENTIFIER ::= { hwPimStdMib 2 }
hwPimMibCompliances OBJECT IDENTIFIER ::= { hwPimMibConformance 1 }
hwPimMibGroups OBJECT IDENTIFIER ::= { hwPimMibConformance 2 }
hwPimMibComplianceAsm MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for PIM-SM MIB."
MODULE -- this module
MANDATORY-GROUPS { hwPimTopologyGroup,
hwPimSsmGroup,
hwPimRpConfigGroup,
hwPimSmGroup }
GROUP hwPimNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimTuningParametersGroup
DESCRIPTION
"This group is optional."
GROUP hwPimRouterStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationObjects
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDiagnosticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDeviceStorageGroup
DESCRIPTION
"This group is optional."
::= { hwPimMibCompliances 1 }
hwPimMibComplianceBidir MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Bidir-PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { hwPimTopologyGroup,
hwPimRpConfigGroup,
hwPimSmGroup,
hwPimBidirGroup }
GROUP hwPimNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimTuningParametersGroup
DESCRIPTION
"This group is optional."
GROUP hwPimRouterStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationObjects
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDiagnosticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDeviceStorageGroup
DESCRIPTION
"This group is optional."
::= { hwPimMibCompliances 2 }
hwPimMibComplianceSsm MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for PIM SSM MIB."
MODULE -- this module
MANDATORY-GROUPS { hwPimTopologyGroup,
hwPimSsmGroup }
GROUP hwPimNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimTuningParametersGroup
DESCRIPTION
"This group is optional."
GROUP hwPimRouterStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationObjects
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDiagnosticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDeviceStorageGroup
DESCRIPTION
"This group is optional."
::= { hwPimMibCompliances 3 }
hwPimMibComplianceDm MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for PIM-DM MIB."
MODULE -- this module
MANDATORY-GROUPS { hwPimTopologyGroup,
hwPimSsmGroup,
hwPimRpConfigGroup,
hwPimSmGroup,
hwPimDmGroup }
GROUP hwPimNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimTuningParametersGroup
DESCRIPTION
"This group is optional."
GROUP hwPimRouterStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationObjects
DESCRIPTION
"This group is optional."
GROUP hwPimNetMgmtNotificationGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDiagnosticsGroup
DESCRIPTION
"This group is optional."
GROUP hwPimDeviceStorageGroup
DESCRIPTION
"This group is optional."
::= { hwPimMibCompliances 4 }
hwPimTopologyGroup OBJECT-GROUP
OBJECTS { hwPimInterfaceAddressType,
hwPimInterfaceAddress,
hwPimInterfaceGenerationIdValue,
hwPimInterfaceDr,
hwPimInterfaceDrPriorityEnabled,
hwPimInterfaceHelloHoldtime,
hwPimInterfaceJoinPruneHoldtime,
hwPimInterfaceLanDelayEnabled,
hwPimInterfaceEffectPropagDelay,
hwPimInterfaceEffectOverrideIvl,
hwPimInterfaceSuppressionEnabled,
hwPimInterfaceBidirCapable,
hwPimNeighborGenerationIdPresent,
hwPimNeighborGenerationIdValue,
hwPimNeighborUpTime,
hwPimNeighborExpiryTime,
hwPimNeighborDrPriorityPresent,
hwPimNeighborDrPriority,
hwPimNeighborLanPruneDelayPresent,
hwPimNeighborTBit,
hwPimNeighborPropagationDelay,
hwPimNeighborOverrideInterval,
hwPimNeighborBidirCapable,
hwPimNbrSecAddress,
hwPimNeighborIfName,
hwPimInterfaceName
}
STATUS current
DESCRIPTION
"A collection of read-only objects used to report local PIM
topology."
::= { hwPimMibGroups 1 }
hwPimNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwPimNeighborLoss }
STATUS current
DESCRIPTION
"A collection of notifications for signaling important PIM
events."
::= { hwPimMibGroups 2 }
hwPimTuningParametersGroup OBJECT-GROUP
OBJECTS { hwPimKeepalivePeriod,
hwPimRegisterSuppressionTime,
hwPimInterfaceDrPriority,
hwPimInterfaceHelloInterval,
hwPimInterfaceTrigHelloInterval,
hwPimInterfaceJoinPruneInterval,
hwPimInterfacePropagationDelay,
hwPimInterfaceOverrideInterval,
hwPimInterfaceDomainBorder,
hwPimInterfaceStubInterface,
hwPimInterfaceStatus,
hwPimInterfaceStorageType
}
STATUS current
DESCRIPTION
"A collection of writeable objects used to configure PIM
behavior and to tune performance."
::= { hwPimMibGroups 3 }
hwPimRouterStatisticsGroup OBJECT-GROUP
OBJECTS { hwPimStarGEntries,
hwPimStarGIEntries,
hwPimSGEntries,
hwPimSGIEntries,
hwPimSGRptEntries,
hwPimSGRptIEntries
}
STATUS current
DESCRIPTION
"A collection of statistics global to the PIM router."
::= { hwPimMibGroups 4 }
hwPimSsmGroup OBJECT-GROUP
OBJECTS { hwPimSGUpTime,
hwPimSGPimMode,
hwPimSGUpstreamJoinState,
hwPimSGUpstreamJoinTimer,
hwPimSGUpstreamNeighbor,
hwPimSGRpfIfIndex,
hwPimSGRpfNextHopType,
hwPimSGRpfNextHop,
hwPimSGRpfRouteProtocol,
hwPimSGRpfRouteAddress,
hwPimSGRpfRoutePrefixLength,
hwPimSGRpfRouteMetricPref,
hwPimSGRpfRouteMetric,
hwPimSGSptBit,
hwPimSGKeepaliveTimer,
hwPimSGDrRegisterState,
hwPimSGDrRegisterStopTimer,
hwPimSGRpRegisterPmbrAddressType,
hwPimSGRpRegisterPmbrAddress,
hwPimSGIUpTime,
hwPimSGILocalMembership,
hwPimSGIJoinPruneState,
hwPimSGIPrunePendingTimer,
hwPimSGIJoinExpiryTimer,
hwPimSGIAssertState,
hwPimSGIAssertTimer,
hwPimSGIAssertWinnerAddressType,
hwPimSGIAssertWinnerAddress,
hwPimSGIAssertWinnerMetricPref,
hwPimSGIAssertWinnerMetric
}
STATUS current
DESCRIPTION
"A collection of objects to support management of PIM
routers running the PIM SSM (Source Specific Multicast)
protocol, in PIM mode SM (Sparse Mode)."
::= { hwPimMibGroups 5 }
hwPimRpConfigGroup OBJECT-GROUP
OBJECTS { hwPimGroupMappingPimMode,
hwPimGroupMappingPrecedence
}
STATUS current
DESCRIPTION
"A collection of objects to support configuration of RPs
(Rendezvous Points) and Group Mappings."
::= { hwPimMibGroups 6 }
hwPimSmGroup OBJECT-GROUP
OBJECTS { hwPimStarGUpTime,
hwPimStarGPimMode,
hwPimStarGRpAddressType,
hwPimStarGRpAddress,
hwPimStarGPimModeOrigin,
hwPimStarGRpIsLocal,
hwPimStarGUpstreamJoinState,
hwPimStarGUpstreamJoinTimer,
hwPimStarGUpstreamNeighborType,
hwPimStarGUpstreamNeighbor,
hwPimStarGRpfIfIndex,
hwPimStarGRpfNextHopType,
hwPimStarGRpfNextHop,
hwPimStarGRpfRouteProtocol,
hwPimStarGRpfRouteAddress,
hwPimStarGRpfRoutePrefixLength,
hwPimStarGRpfRouteMetricPref,
hwPimStarGRpfRouteMetric,
hwPimStarGIUpTime,
hwPimStarGILocalMembership,
hwPimStarGIJoinPruneState,
hwPimStarGIPrunePendingTimer,
hwPimStarGIJoinExpiryTimer,
hwPimStarGIAssertState,
hwPimStarGIAssertTimer,
hwPimStarGIAssertWinnerAddressType,
hwPimStarGIAssertWinnerAddress,
hwPimStarGIAssertWinnerMetricPref,
hwPimStarGIAssertWinnerMetric,
hwPimSGRptUpTime,
hwPimSGRptUpstreamPruneState,
hwPimSGRptUpstreamOverrideTimer,
hwPimSGRptIUpTime,
hwPimSGRptILocalMembership,
hwPimSGRptIJoinPruneState,
hwPimSGRptIPrunePendingTimer,
hwPimSGRptIPruneExpiryTimer
}
STATUS current
DESCRIPTION
"A collection of objects to support management of PIM
routers running PIM-SM (Sparse Mode). The groups
hwPimSsmGroup and hwPimRpConfigGroup are also required."
::= { hwPimMibGroups 7 }
hwPimBidirGroup OBJECT-GROUP
OBJECTS { hwPimInterfaceDfElectionRobustness
}
STATUS current
DESCRIPTION
"A collection of objects to support management of PIM
routers running BIDIR mode. The groups hwPimSsmGroup,
hwPimSmGroup and hwPimRpConfigGroup are also required."
::= { hwPimMibGroups 8 }
hwPimNetMgmtNotificationObjects OBJECT-GROUP
OBJECTS { hwPimInvalidRegisterNotificationPeriod,
hwPimInvalidRegisterMsgsRcvd,
hwPimInvalidRegisterAddressType,
hwPimInvalidRegisterOrigin,
hwPimInvalidRegisterGroup,
hwPimInvalidRegisterRp,
hwPimInvalidJoinPruneNotificationPeriod,
hwPimInvalidJoinPruneMsgsRcvd,
hwPimInvalidJoinPruneAddressType,
hwPimInvalidJoinPruneOrigin,
hwPimInvalidJoinPruneGroup,
hwPimInvalidJoinPruneRp,
hwPimRpMappingNotificationPeriod,
hwPimRpMappingChangeCount,
hwPimInterfaceElectionNotificationPeriod,
hwPimInterfaceElectionWinCount,
hwPimNeighborAddNotificationPeriod,
hwPimNeighborAddCount,
hwPimGRStartTime,
hwPimGRInterval,
hwPimGREndTime,
hwPimInstanceName,
hwPimMrtLimitAddressType,
hwPimMrtLimitSource,
hwPimMrtLimitGroup,
hwPimInstanceID,
hwPimInstanceName,
hwPimNeighborNotificationReason,
hwPimNotificationAddressType,
hwPimStarGCurrentCount,
hwPimStarGTotalCount,
hwPimStarGThreshold,
hwPimSGCurrentCount,
hwPimSGTotalCount,
hwPimSGThreshold,
hwPimNotificationSrcAddr,
hwPimNotificationGrpAddr
}
STATUS current
DESCRIPTION
"A collection of objects to support notification of PIM
network management events."
::= { hwPimMibGroups 11 }
hwPimNetMgmtNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwPimInvalidRegister,
hwPimInvalidJoinPrune,
hwPimRpMappingChange,
hwPimInterfaceElection,
hwPimNeighborAdd,
hwPimGRStart,
hwPimGREnd,
hwPimMrtLimit,
hwPimNeighborUnavailable,
hwPimNeighborUnavailableClear,
hwPimMrtLimitClear,
hwPimStarGThresholdExceed,
hwPimStarGThresholdExceedClear,
hwPimStarGExceed,
hwPimStarGExceedClear,
hwPimSGThresholdExceed,
hwPimSGThresholdExceedClear,
hwPimSGExceed,
hwPimSGExceedClear,
hwPimGlobalTypeSGThresholdExceed,
hwPimGlobalTypeSGThresholdExceedClear,
hwPimGlobalTypeSGExceed,
hwPimGlobalTypeSGExceedClear
}
STATUS current
DESCRIPTION
"A collection of notifications for signaling PIM network
management events."
::= { hwPimMibGroups 12 }
hwPimDiagnosticsGroup OBJECT-GROUP
OBJECTS { hwPimInAsserts,
hwPimOutAsserts,
hwPimLastAssertInterface,
hwPimLastAssertGroupAddressType,
hwPimLastAssertGroupAddress,
hwPimLastAssertSourceAddressType,
hwPimLastAssertSourceAddress,
hwPimNeighborLossNotificationPeriod,
hwPimNeighborLossCount
}
STATUS current
DESCRIPTION
"Objects providing additional diagnostics related to a PIM
router."
::= { hwPimMibGroups 13 }
hwPimDmGroup OBJECT-GROUP
OBJECTS {
hwPimRefreshInterval,
hwPimInterfacePruneLimitInterval,
hwPimInterfaceGraftRetryInterval,
hwPimInterfaceSrPriorityEnabled,
hwPimNeighborSrCapable,
hwPimSGUpstreamPruneState,
hwPimSGUpstreamPruneLimitTimer,
hwPimSGOriginatorState,
hwPimSGSourceActiveTimer,
hwPimSGStateRefreshTimer
}
STATUS current
DESCRIPTION
"A collection of objects required for management of PIM
Dense Mode (PIM-DM) function. The groups hwPimSsmGroup and
hwPimSmGroup are also required."
REFERENCE "RFC 3973"
::= { hwPimMibGroups 14 }
hwPimDeviceStorageGroup OBJECT-GROUP
OBJECTS { hwPimDeviceConfigStorageType
}
STATUS current
DESCRIPTION
"An object that specifies the volatility of global PIM
configuration settings on this device."
::= { hwPimMibGroups 15 }
END