mibs/MIBS/huawei/HUAWEI-RRPP-MIB
2023-12-05 12:25:34 +01:00

1143 lines
42 KiB
Plaintext

-- ==================================================================
-- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI LAN Switch RRPP MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2006-02-20 Created by Gurongwei 50539
-- V1.1 2006-06-07 Modify by xingxing 51692
-- V1.2 2006-07-07 Modify by zhouyun 60016423
-- V1.3 2006-09-11 Modify by zhouyun 60016423
-- V1.4 2006-12-29 Modify by zhouyun 60016423
-- V1.5 2007-8-2 Modify by jianglian 60019048
-- 2008-6-5 Modify by yanjiajun 130005
-- ==================================================================
HUAWEI-RRPP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
VlanId
FROM Q-BRIDGE-MIB;
hwRrpp MODULE-IDENTITY
LAST-UPDATED "200607130000Z"
ORGANIZATION
"Huawei Technologies Co. Ltd."
CONTACT-INFO
"Platform Team Huawei Technologies Co. Ltd.
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085"
DESCRIPTION
"The RRPP (Rapid Ring Protection protocol) provides
fast protection switching to layer 2 switches
interconnected in an Ethernet ring topology. When
a link in the ring breaks, the RRPP can recover the
data path quickly. Its protection switching is
similar to what can be achieved with the Spanning
Tree Protocol (STP), but the converging time is less
than a second after link failure.
This MIB defines management information used on
products which support RRPP."
::= { hwDatacomm 113 }
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
hwRrppScalarGroup OBJECT IDENTIFIER ::= { hwRrpp 1 }
hwRrppEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicating whether the RRPP is enabled on this switch."
::= { hwRrppScalarGroup 1 }
hwRrppLinkupDelayTime OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value indicates the delay when ports change to Up ."
DEFVAL { '0'b }
::= { hwRrppScalarGroup 2 }
hwRrppTables OBJECT IDENTIFIER ::= { hwRrpp 2 }
hwRrppDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about configurations
and status of a RRPP domain."
::= { hwRrppTables 1 }
hwRrppDomainEntry OBJECT-TYPE
SYNTAX HwRrppDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified RRPP domain."
INDEX { hwRrppDomainID }
::= { hwRrppDomainTable 1 }
HwRrppDomainEntry ::=
SEQUENCE {
hwRrppDomainID
INTEGER,
hwRrppDomainControlVlanID
INTEGER,
hwRrppDomainProtectedVlan
OCTET STRING,
hwRrppDomainHelloTime
INTEGER,
hwRrppDomainFailTime
INTEGER,
hwRrppDomainRowStatus
RowStatus,
hwRrppDomainResetStatistics
INTEGER,
hwRrppMulSubRingProtection
EnabledStatus
}
hwRrppDomainID OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index uniquely identifies a RRPP domain,
which ranges from 1~8.
This value can't be modified after created."
::= { hwRrppDomainEntry 1 }
hwRrppDomainControlVlanID OBJECT-TYPE
SYNTAX INTEGER (1..4093 | 65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the control VLAN specified to a domain.
The value 65535 indicates the control VLAN has
not been configured.
The VLAN assigned to a RRPP Domain must not have
been created.
This value can't be modified after created."
DEFVAL { 65535 }
::= { hwRrppDomainEntry 2 }
hwRrppDomainHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value indicates the interval between two hello
packets sent by master-node, and its unit is second.
The value ranges from 1s~10s."
DEFVAL { 1 }
::= { hwRrppDomainEntry 3 }
hwRrppDomainFailTime OBJECT-TYPE
SYNTAX INTEGER (3..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The expiration value of the fail-period timer and its unit
is second. If not receiving hello packets before this
expires, the master-node considers the ring is broken.
The value of this node ranging from 3s~30s must not be
less than triple hwRrppDomainHelloTime's value."
DEFVAL { 3 }
::= { hwRrppDomainEntry 4 }
hwRrppDomainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation."
::= { hwRrppDomainEntry 5 }
hwRrppDomainResetStatistics OBJECT-TYPE
SYNTAX INTEGER
{
cleared(1),
unused(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Clears the statistics of packets received and sent on the current domain."
::= { hwRrppDomainEntry 6 }
hwRrppMulSubRingProtection OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicating whether the rrpp mul-sub-ring protection is enabled on this switch."
::= { hwRrppDomainEntry 7 }
hwRrppDomainProtectedVlan OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Information about the instances bound to a domain.
The value ranges from 0 to 48. Both the ID and the number of the instances can be obtained through the value."
::= { hwRrppDomainEntry 8 }
hwRrppRingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about configurations
and status of a RRPP Ring."
::= { hwRrppTables 2 }
hwRrppRingEntry OBJECT-TYPE
SYNTAX HwRrppRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified RRPP Ring."
INDEX { hwRrppDomainID, hwRrppRingID }
::= { hwRrppRingTable 1 }
HwRrppRingEntry ::=
SEQUENCE {
hwRrppRingID
INTEGER,
hwRrppRingEnableStatus
EnabledStatus,
hwRrppRingActive
INTEGER,
hwRrppRingState
INTEGER,
hwRrppRingNodeMode
INTEGER,
hwRrppRingPrimaryPort
InterfaceIndex,
hwRrppRingSecondaryPort
InterfaceIndex,
hwRrppRingLevel
INTEGER,
hwRrppRingRowStatus
RowStatus,
hwRrppRingResetStatistics
INTEGER
}
hwRrppRingID OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index uniquely identifies a RRPP Ring,
which ranges from 1~64.
This value can't be modified after created."
::= { hwRrppRingEntry 1 }
hwRrppRingEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicating whether the RRPP is enabled on this Ring.
NOTE: If major-ring and sub-ring(s) of a domain
coexist on a switch, major-ring must be enabled
before sub-ring is enabled. And sub-ring must be
disabled before major-ring is disabled."
::= { hwRrppRingEntry 2 }
hwRrppRingActive OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"As both hwRrppEnableStatus and hwRrppRingEnableStatus
are enabled, the ring is activated. Whereas either of
the two items is disabled, the ring is inactive."
::= { hwRrppRingEntry 3 }
hwRrppRingState OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
health(2),
fault(3),
complete(4),
failed(5),
linkup(6),
linkdown(7),
preforwarding(8),
linkupnotify(9),
linkdownnotify(10),
preforwardnotify(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status (i.e. unknown, health or fault) of the Ethernet
ring."
::= { hwRrppRingEntry 4 }
hwRrppRingNodeMode OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
transit(2),
edge(3),
assistantEdge(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"There are four RRPP node modes for the switch on a RRPP
ring, such as master, transit, edge and assistant-edge.
Each RRPP ring has a single designated master-node. All
other nodes except edge-node and assistant-edge-node on
that ring are referred to as transit-nodes.
The node mode of edge and assistant-edge should be
configured only on sub-ring. When there is a common link
between a sub-ring and its major-ring, the node mode of
the sub-ring must be edge or assistant-edge, and they must
be configured in pairs.
If node mode is designated as edge or assistant-edge,
several points should be noticed:
Major-ring must be created before a sub-ring is created;
Major-ring can't be deleted unless all its sub-rings are
deleted;
The node mode of the switch on major-ring must be
transit;
Major-ring and sub-ring must have only a common port.
This value can't be modified after created."
::= { hwRrppRingEntry 5 }
hwRrppRingPrimaryPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the switch is a master-node or transit-node, this value
is ifIndex of the primary port; otherwise, if the switch is an
edge-node or assistant-edge-node, this value is ifIndex of the common
port.
This value is 0, if the port doesn't exist.
This value can't be modified after created."
::= { hwRrppRingEntry 6 }
hwRrppRingSecondaryPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the switch is a master-node or transit-node, this value
is ifIndex of the secondary port; otherwise, if the switch is
an edge-node or assistant-edge-node, this value is ifIndex of the edge
port.
This value is 0, if the port doesn't exist.
This value can't be modified after created."
::= { hwRrppRingEntry 7 }
hwRrppRingLevel OBJECT-TYPE
SYNTAX INTEGER
{
majorRing(0),
subRing(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Level of a ring. This field should be set 0 on major-ring
and 1 on the sub-ring.
This value can't be modified after created."
::= { hwRrppRingEntry 8 }
hwRrppRingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, hwRrppRingNodeMode,
hwRrppRingPrimaryPort, hwRrppRingSecondaryPort and
hwRrppRingLevel must be specified."
::= { hwRrppRingEntry 9 }
hwRrppRingResetStatistics OBJECT-TYPE
SYNTAX INTEGER
{
cleared(1),
unused(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Clears the statistics of packets received and sent on the current ring."
::= { hwRrppRingEntry 10 }
hwRrppPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about configurations and
status of a RRPP port."
::= { hwRrppTables 3 }
hwRrppPortEntry OBJECT-TYPE
SYNTAX HwRrppPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified RRPP port."
INDEX { hwRrppDomainID, hwRrppRingID, hwRrppPortID }
::= { hwRrppPortTable 1 }
HwRrppPortEntry ::=
SEQUENCE {
hwRrppPortID
InterfaceIndex,
hwRrppPortType
INTEGER,
hwRrppPortRole
INTEGER,
hwRrppPortState
INTEGER,
hwRrppPortRXError
Counter32,
hwRrppPortRXHello
Counter32,
hwRrppPortRXLinkUp
Counter32,
hwRrppPortRXLinkDown
Counter32,
hwRrppPortRXCommonFlush
Counter32,
hwRrppPortRXCompleteFlush
Counter32,
hwRrppPortRXEdgeHello
Counter32,
hwRrppPortRXMajorFault
Counter32,
hwRrppPortTXError
Counter32,
hwRrppPortTXHello
Counter32,
hwRrppPortTXLinkUp
Counter32,
hwRrppPortTXLinkDown
Counter32,
hwRrppPortTXCommonFlush
Counter32,
hwRrppPortTXCompleteFlush
Counter32,
hwRrppPortTXEdgeHello
Counter32,
hwRrppPortTXMajorFault
Counter32
}
hwRrppPortID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical index of the interface index."
::= { hwRrppPortEntry 1 }
hwRrppPortType OBJECT-TYPE
SYNTAX INTEGER
{
fe(1),
ge(2),
ve(3),
ethtrunk(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface type of the RRPP port.
(i.e. FE, GE, VE or Eth-Trunk port)."
::= { hwRrppPortEntry 2 }
hwRrppPortRole OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2),
common(3),
edge(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RRPP role of the port.
(i.e. primary, secondary, common or edge port)."
::= { hwRrppPortEntry 3 }
hwRrppPortState OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
unblocked(2),
blocked(3),
down(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of RRPP port, including unknown, unblocked, blocked
and down."
::= { hwRrppPortEntry 4 }
hwRrppPortRXError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of illegal RRPP packets received from
this port."
::= { hwRrppPortEntry 5 }
hwRrppPortRXHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of hello packets received from
this port on specified ring."
::= { hwRrppPortEntry 6 }
hwRrppPortRXLinkUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of link-up packets received
from this port on specified ring."
::= { hwRrppPortEntry 7 }
hwRrppPortRXLinkDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of link-down packets received
from this port on specified ring."
::= { hwRrppPortEntry 8 }
hwRrppPortRXCommonFlush OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of common-flush packets received from
this port on specified ring.
Instruction
When master-node receives valid link-down packets
or link-up packets, it will send common-flush packets,
instructing the other nodes on the ring to flush their
forwarding database.
When the nodes except master-node receive common-flush,
they will flush forwarding database. If there is any
port blocked on that node, it won't be unblocked."
::= { hwRrppPortEntry 9 }
hwRrppPortRXCompleteFlush OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of complete-flush packets received
from this port on specified ring.
Instruction
When the ring recovers, master-node will receive its own
hello packets. It will send complete-flush packets,
instructing the other nodes on the ring to flush their
forwarding database.
When the nodes except master-node receive complete-flush,
they will flush forwarding database. If there is any port
blocked on that node, it will be unblocked."
::= { hwRrppPortEntry 10 }
hwRrppPortRXEdgeHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of edge-hello packets received
from this port on specified ring.
Instruction
When edge-node sends edge-hello packets,
assistantEdge-node will receive its own edge-hello
packets from the common link and the master ring."
::= { hwRrppPortEntry 11 }
hwRrppPortRXMajorFault OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of major-fault packets received
from this port on specified ring.
Instruction
When assistantEdge can't receive edge-hello packets
in the specified fault-time,
assistantEdge-node will send its own major-fault
packets from the edge port around the sub ring.
Edge-node will receive the major-fault packets from
its edge port. Then Edge-node will block its edge port."
::= { hwRrppPortEntry 12 }
hwRrppPortTXError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of RRPP packets failed to send out of
this port."
::= { hwRrppPortEntry 13 }
hwRrppPortTXHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of hello packets sent from
this port on specified ring."
::= { hwRrppPortEntry 14 }
hwRrppPortTXLinkUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of link-up packets sent
from this port on specified ring."
::= { hwRrppPortEntry 15 }
hwRrppPortTXLinkDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of link-down packets sent
from this port on specified ring."
::= { hwRrppPortEntry 16 }
hwRrppPortTXCommonFlush OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of common-flush packets sent from
this port on specified ring."
::= { hwRrppPortEntry 17 }
hwRrppPortTXCompleteFlush OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of complete-flush packets sent
from this port on specified ring."
::= { hwRrppPortEntry 18 }
hwRrppPortTXEdgeHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of edge-hello packets sent
from this port on specified ring."
::= { hwRrppPortEntry 19 }
hwRrppPortTXMajorFault OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistics of major-fault packets sent
from this port on specified ring."
::= { hwRrppPortEntry 20 }
hwRrppTrackInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWRrppTrackInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about tracking port."
::= { hwRrppTables 4 }
hwRrppTrackInterfaceEntry OBJECT-TYPE
SYNTAX HWRrppTrackInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified RRPP track interface."
INDEX { hwRrppDomainID, hwRrppRingID, hwRrppTrackInterfaceID }
::= { hwRrppTrackInterfaceTable 1 }
HWRrppTrackInterfaceEntry ::=
SEQUENCE {
hwRrppTrackInterfaceID
InterfaceIndex,
hwRrppTrackRowStatus
RowStatus
}
hwRrppTrackInterfaceID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical index of track interface."
::= { hwRrppTrackInterfaceEntry 1 }
hwRrppTrackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation."
::= { hwRrppTrackInterfaceEntry 2 }
hwRrppRingGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppRingGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about an RRPP ring group and created without the domain or ring."
::= { hwRrppTables 5 }
hwRrppRingGroupEntry OBJECT-TYPE
SYNTAX HwRrppRingGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information about a specified RRPP ring group."
INDEX { hwRrppRingGroupID }
::= { hwRrppRingGroupTable 1 }
HwRrppRingGroupEntry ::=
SEQUENCE {
hwRrppRingGroupID
Integer32,
hwRrppRingGroupRowStatus
RowStatus
}
hwRrppRingGroupID OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of the RRPP ring group,
which ranges from 1~16.
This value can't be modified after created"
::= { hwRrppRingGroupEntry 1 }
hwRrppRingGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status in the ring group configuration table.
hwRrppRingGroupID must be specified to create a row."
::= { hwRrppRingGroupEntry 2 }
hwRrppRingGroupMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppRingGroupMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about the configurations and status of an RRPP ring."
::= { hwRrppTables 6 }
hwRrppRingGroupMemberEntry OBJECT-TYPE
SYNTAX HwRrppRingGroupMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information about a specified RRPP ring group."
INDEX { hwRrppRingGroupID, hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID }
::= { hwRrppRingGroupMemberTable 1 }
HwRrppRingGroupMemberEntry ::=
SEQUENCE {
hwRrppRingGroupMemberDomainID
Integer32,
hwRrppRingGroupMemberRingID
Integer32,
hwRrppRingGroupIsEdgeHelloProcess
EnabledStatus,
hwRrppRingGroupMemberRowStatus
RowStatus
}
hwRrppRingGroupMemberDomainID OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index, namely, domain ID of the members of a ring group, which ranges from 1 to 8.
This value cannot be modified after created"
::= { hwRrppRingGroupMemberEntry 1 }
hwRrppRingGroupMemberRingID OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index, namely, ring ID of the members of a ring group, which ranges from 1 to 64.
This value cannot be modified after created."
::= { hwRrppRingGroupMemberEntry 2 }
hwRrppRingGroupIsEdgeHelloProcess OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flag carried in the sent edge-Hello Packet.
This value can be modified after created."
::= { hwRrppRingGroupMemberEntry 3 }
hwRrppRingGroupMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status in the ring group configuration table.
hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID,
and hwRrppRingGroupIsEdgeHelloSender must be specified to create a row."
::= { hwRrppRingGroupMemberEntry 4 }
hwRrppSnoopingTable OBJECT IDENTIFIER ::= { hwRrpp 3 }
hwRrppSnoopingInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppSnoopingInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about RRPP snooping enable interface."
::= { hwRrppSnoopingTable 1 }
hwRrppSnoopingInterfaceEntry OBJECT-TYPE
SYNTAX HwRrppSnoopingInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified RRPP snooping enable interface."
INDEX { hwRrppSnoopingInterfaceId }
::= { hwRrppSnoopingInterfaceTable 1 }
HwRrppSnoopingInterfaceEntry ::=
SEQUENCE {
hwRrppSnoopingInterfaceId
InterfaceIndex,
hwRrppSnoopingVsiName
OCTET STRING,
hwRrppSnoopingVlanId
VlanId,
hwRrppSnoopingEnableStatus
EnabledStatus,
hwRrppSnoopingRowStatus
RowStatus
}
hwRrppSnoopingInterfaceId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical index of the interface index."
::= { hwRrppSnoopingInterfaceEntry 1 }
hwRrppSnoopingVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of VSI which the interface was binding to."
::= { hwRrppSnoopingInterfaceEntry 2 }
hwRrppSnoopingVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN which the intertace added to."
::= { hwRrppSnoopingInterfaceEntry 3 }
hwRrppSnoopingEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicating whether the RRPP snooping is enabled on this switch."
::= { hwRrppSnoopingInterfaceEntry 4 }
hwRrppSnoopingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation."
::= { hwRrppSnoopingInterfaceEntry 5 }
hwRrppSnoopingVsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRrppSnoopingVsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about RRPP snooping relating interface."
::= { hwRrppSnoopingTable 2 }
hwRrppSnoopingVsiEntry OBJECT-TYPE
SYNTAX HwRrppSnoopingVsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified RRPP snooping relating interface."
INDEX { hwRrppSnoopingVsiInterfaceId, hwVsiName}
::= { hwRrppSnoopingVsiTable 1 }
HwRrppSnoopingVsiEntry ::=
SEQUENCE {
hwRrppSnoopingVsiInterfaceId
InterfaceIndex,
hwVsiName
OCTET STRING,
hwRrppSnoopingVsiRowStatus
RowStatus
}
hwRrppSnoopingVsiInterfaceId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical index of the interface index."
::= { hwRrppSnoopingVsiEntry 1 }
hwVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of VSI."
::= { hwRrppSnoopingVsiEntry 2 }
hwRrppSnoopingVsiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation."
::= { hwRrppSnoopingVsiEntry 3 }
hwRrppNotifications OBJECT IDENTIFIER ::= { hwRrpp 4 }
hwRrppRingRecover NOTIFICATION-TYPE
OBJECTS { hwRrppRingState }
STATUS current
DESCRIPTION
"Trap message is generated by master-node on
the ring when the ring recovers from fault."
::= { hwRrppNotifications 1 }
hwRrppRingFail NOTIFICATION-TYPE
OBJECTS { hwRrppRingState }
STATUS current
DESCRIPTION
"Trap message is generated by master-node on
the ring when the ring fails."
::= { hwRrppNotifications 2 }
hwRrppMultiMaster NOTIFICATION-TYPE
OBJECTS { hwRrppRingNodeMode }
STATUS current
DESCRIPTION
"Trap message is generated by master-node when
it detects there are more than one master-node
on the ring."
::= { hwRrppNotifications 3 }
hwRrppTrackInterfaceDown NOTIFICATION-TYPE
OBJECTS { hwRrppTrackRowStatus }
STATUS current
DESCRIPTION
"Trap message is generated by RRPP node when
the track interface tracked BFD down."
::= { hwRrppNotifications 4 }
hwRrppTrackInterfaceUp NOTIFICATION-TYPE
OBJECTS { hwRrppTrackRowStatus }
STATUS current
DESCRIPTION
"Trap message is generated by RRPP node when
the track interface tracked BFD up."
::= { hwRrppNotifications 5 }
hwRrppMibGroup OBJECT IDENTIFIER ::= { hwRrpp 5 }
hwRrppGlobalGroup OBJECT-GROUP
OBJECTS { hwRrppEnableStatus, hwRrppLinkupDelayTime }
STATUS current
DESCRIPTION
"The RRPP global group."
::= { hwRrppMibGroup 1 }
hwRrppDomainGroup OBJECT-GROUP
OBJECTS { hwRrppDomainControlVlanID,hwRrppDomainHelloTime, hwRrppDomainFailTime, hwRrppDomainRowStatus,hwRrppDomainResetStatistics, hwRrppMulSubRingProtection, hwRrppDomainProtectedVlan }
STATUS current
DESCRIPTION
"The RRPP domain group."
::= { hwRrppMibGroup 2 }
hwRrppRingGroup OBJECT-GROUP
OBJECTS { hwRrppRingEnableStatus, hwRrppRingActive, hwRrppRingState, hwRrppRingNodeMode, hwRrppRingPrimaryPort,
hwRrppRingSecondaryPort, hwRrppRingLevel, hwRrppRingRowStatus,hwRrppRingResetStatistics }
STATUS current
DESCRIPTION
"The RRPP ring group."
::= { hwRrppMibGroup 3 }
hwRrppPortGroup OBJECT-GROUP
OBJECTS { hwRrppPortType, hwRrppPortRole, hwRrppPortState, hwRrppPortRXError, hwRrppPortRXHello,
hwRrppPortRXLinkUp, hwRrppPortRXLinkDown, hwRrppPortRXCommonFlush, hwRrppPortRXCompleteFlush, hwRrppPortRXEdgeHello,
hwRrppPortRXMajorFault, hwRrppPortTXError, hwRrppPortTXHello, hwRrppPortTXLinkUp, hwRrppPortTXLinkDown,
hwRrppPortTXCommonFlush, hwRrppPortTXCompleteFlush, hwRrppPortTXEdgeHello, hwRrppPortTXMajorFault }
STATUS current
DESCRIPTION
"The RRPP port group."
::= { hwRrppMibGroup 4 }
hwRrppTrackInterfaceGroup OBJECT-GROUP
OBJECTS { hwRrppTrackRowStatus }
STATUS current
DESCRIPTION
"The RRPP Track Interface group."
::= { hwRrppMibGroup 5 }
hwRrppRingGroupGroup OBJECT-GROUP
OBJECTS {hwRrppRingGroupRowStatus }
STATUS current
DESCRIPTION
"The RRPP RingGroup group."
::= { hwRrppMibGroup 6 }
hwRrppRingGroupMemberGroup OBJECT-GROUP
OBJECTS {hwRrppRingGroupIsEdgeHelloProcess,hwRrppRingGroupMemberRowStatus }
STATUS current
DESCRIPTION
"The RRPP RingGroupMember group."
::= { hwRrppMibGroup 7 }
hwRrppSnoopingInterfaceGroup OBJECT-GROUP
OBJECTS { hwRrppSnoopingVsiName, hwRrppSnoopingVlanId, hwRrppSnoopingEnableStatus, hwRrppSnoopingRowStatus }
STATUS current
DESCRIPTION
"The RRPP Snooping enable Interface group."
::= { hwRrppMibGroup 8 }
hwRrppSnoopingVsiGroup OBJECT-GROUP
OBJECTS { hwRrppSnoopingVsiRowStatus }
STATUS current
DESCRIPTION
"The RRPP Snooping associate vsi group."
::= { hwRrppMibGroup 9 }
hwRrppNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwRrppRingRecover, hwRrppRingFail, hwRrppMultiMaster, hwRrppTrackInterfaceDown, hwRrppTrackInterfaceUp}
STATUS current
DESCRIPTION
"The notification group."
::= { hwRrppMibGroup 10 }
END