mibs/MIBS/huawei/HUAWEI-VPN-DIAGNOSTICS-MIB
2023-12-05 12:25:34 +01:00

1108 lines
47 KiB
Plaintext

-- =================================================================
-- Copyright (C) 2014 by HUAWEI TECHNOLOGIES. All rights reserved
--
-- Description: VPN diagnostics MIB.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 zhuxiao,luobin 2008.08.08,publish
--
--
-- =================================================================
HUAWEI-VPN-DIAGNOSTICS-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
HWL2VpnVcEncapsType
FROM HUAWEI-VPLS-EXT-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
EnabledStatus
FROM P-BRIDGE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
mib-2, IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
MacAddress, RowStatus, DisplayString, TEXTUAL-CONVENTION
FROM SNMPv2-TC ;
--
vpndiagnostics MODULE-IDENTITY
LAST-UPDATED "201401181722Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"HUAWEI service quality detect funcion."
REVISION "201401181722Z"
DESCRIPTION
"Modify type of hwVpnCfgPingPwId and hwVpnCfgPingResultPwId at 2014-01-18."
REVISION "201312160958Z"
DESCRIPTION
"Modify type of hwVpnCfgPingPwId and hwVpnCfgPingResultPwId at 2013-12-16."
REVISION "201307161600Z"
DESCRIPTION
"Modify description of hwOamMacCountReset at 2013-7-16."
REVISION "200806061600Z"
DESCRIPTION
"Inition at 2008-6-6."
::= { hwDatacomm 172 }
--
-- Textual conventions
--
MacOpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Select test type"
SYNTAX INTEGER
{
populate(1),
purge(2)
}
--
-- Node definitions
--
macoper OBJECT IDENTIFIER ::= { vpndiagnostics 1 }
-- ===========================================================================
-- populateBase
-- ===========================================================================
populateBase OBJECT IDENTIFIER ::= { macoper 1 }
hwOamMacPopulateCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received populate packets in current device."
::= { populateBase 1 }
hwOamMacPurgeCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received purge packets in current device."
::= { populateBase 2 }
hwOamMacPurgeRegCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received purge(register) packets in current device."
::= { populateBase 3 }
hwOamMacCountReset OBJECT-TYPE
SYNTAX INTEGER
{
populatereset(1),
purgereset(2),
purgeregreset(3),
allreset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the count of hwOamMacPopulateCount and hwOamMacPurgeCount, the value 1
means reset hwOamMacPopulateCount,the value is 2 means reset hwOamMacPurgeCount,
the value is 3 means reset hwOamMacPurgeRegCount ,the value is 4 means reset hwOamMacPopulateCount and hwOamMacPurgeCount,hwOamMacPurgeRegCount , When read, it always returns value 4."
::= { populateBase 4 }
hwOamMacSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of enabling MAC populate,if the value is 1, enable; if the value is 2, disable."
::= { populateBase 5 }
hwOamMacEntryNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entry number of hwOamMacDisplayTable."
::= { populateBase 6 }
-- ===========================================================================
-- hwOamMacOperTable
-- ===========================================================================
hwOamMacOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOamMacOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which to be populate or purge operation."
::= { macoper 2 }
hwOamMacOperEntry OBJECT-TYPE
SYNTAX HwOamMacOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of hwOamMacOperTable."
INDEX { hwOamMacOperIndex }
::= { hwOamMacOperTable 1 }
HwOamMacOperEntry ::=
SEQUENCE {
hwOamMacOperIndex
Integer32,
hwOamMacOperAddress
MacAddress,
hwOamMacOperVsiName
OCTET STRING,
hwOamMacOperType
MacOpType,
hwOamMacOperRegister
EnabledStatus,
hwOamMacOperFlood
EnabledStatus,
hwOamMacOperNum
Integer32,
hwOamMacOperRowStatus
RowStatus
}
hwOamMacOperIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of hwOamMacOperIndex,it is always 1."
::= { hwOamMacOperEntry 1 }
hwOamMacOperAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC that to be populated or purged."
::= { hwOamMacOperEntry 2 }
hwOamMacOperVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name or other identifier referring to the VSI
which is correlative to the hwOamMac."
::= { hwOamMacOperEntry 3 }
hwOamMacOperType OBJECT-TYPE
SYNTAX MacOpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operate type,1 means populate,2 means purge."
::= { hwOamMacOperEntry 4 }
hwOamMacOperRegister OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"while purge a OAM MAC,register it to be a reserved MAC .
1 means register, 2 means not register. Defaut is 2."
DEFVAL { disable }
::= { hwOamMacOperEntry 5 }
hwOamMacOperFlood OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Broadcast the packet or not. 1 means broadcast, 2 means don`t broadcast.Defaut is 2."
DEFVAL { disable }
::= { hwOamMacOperEntry 6 }
hwOamMacOperNum OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of packets which want to be sent."
DEFVAL { 3 }
::= { hwOamMacOperEntry 7 }
hwOamMacOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwOamMacOperEntry 8 }
-- ===========================================================================
-- hwOamMacListTable
-- ===========================================================================
hwOamMacListTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOamMacListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which displays the OAM MAC applied at huawei."
::= { macoper 3 }
hwOamMacListEntry OBJECT-TYPE
SYNTAX HwOamMacListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display the OAM MAC applied at huawei."
INDEX { hwOamMacListIndex }
::= { hwOamMacListTable 1 }
HwOamMacListEntry ::=
SEQUENCE {
hwOamMacListIndex
Integer32,
hwOamMacListAddress
MacAddress
}
hwOamMacListIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of hwOamMacListIndex."
::= { hwOamMacListEntry 1 }
hwOamMacListAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM MAC applied at huawei."
::= { hwOamMacListEntry 2 }
-- ===========================================================================
-- hwOamMacDisplayTable
-- ===========================================================================
hwOamMacDisplayTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOamMacDisplayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which displays the result of populate or purge operation."
::= { macoper 4 }
hwOamMacDisplayEntry OBJECT-TYPE
SYNTAX HwOamMacDisplayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of hwOamMacDisplayTable."
INDEX { hwOamMacDisplayIndex }
::= { hwOamMacDisplayTable 1 }
HwOamMacDisplayEntry ::=
SEQUENCE {
hwOamMacDisplayIndex
Integer32,
hwOamMacDisplayAddress
MacAddress,
hwOamMacDisplayType
MacOpType,
hwOamMacDisplayVsiName
OCTET STRING,
hwOamMacDisplayAgeTime
Integer32,
hwOamMacDisplayLsrId
IpAddress
}
hwOamMacDisplayIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of hwOamMacDisplayEntry, the value range is from 1 to 100."
::= { hwOamMacDisplayEntry 1 }
hwOamMacDisplayAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM MAC that had been populated or purged."
::= { hwOamMacDisplayEntry 2 }
hwOamMacDisplayType OBJECT-TYPE
SYNTAX MacOpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM MAC type, 1 means populate, 2 means purge."
::= { hwOamMacDisplayEntry 3 }
hwOamMacDisplayVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or other identifier referring to the VSI
which is correlative to the hwOamMac."
::= { hwOamMacDisplayEntry 4 }
hwOamMacDisplayAgeTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age time of the entry."
::= { hwOamMacDisplayEntry 5 }
hwOamMacDisplayLsrId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSR-ID of the sender."
::= { hwOamMacDisplayEntry 6 }
-- ============================================================================
-- identify the group
-- ============================================================================
macoperConformance OBJECT IDENTIFIER ::= { macoper 5 }
hwOamMacGroup OBJECT IDENTIFIER ::= { macoperConformance 1 }
macoperCompliances OBJECT IDENTIFIER ::= { macoperConformance 2 }
macoperCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { hwPopuBaseGroup, hwOamMacOperGroup, hwOamMacListGroup, hwOamMacDisplayGroup }
::= { macoperCompliances 1 }
hwPopuBaseGroup OBJECT-GROUP
OBJECTS { hwOamMacPopulateCount, hwOamMacPurgeCount, hwOamMacPurgeRegCount,hwOamMacCountReset, hwOamMacSwitch, hwOamMacEntryNum}
STATUS current
DESCRIPTION
"hwPopuBaseGroup."
::= { hwOamMacGroup 1 }
hwOamMacOperGroup OBJECT-GROUP
OBJECTS { hwOamMacOperAddress, hwOamMacOperVsiName, hwOamMacOperType, hwOamMacOperRegister, hwOamMacOperFlood,
hwOamMacOperNum, hwOamMacOperRowStatus }
STATUS current
DESCRIPTION
"A collection of objects indicating information of IP address of interface,
contain Ip address, Ip address mask and Ip address acquiring method."
::= { hwOamMacGroup 2 }
hwOamMacListGroup OBJECT-GROUP
OBJECTS { hwOamMacListAddress }
STATUS current
DESCRIPTION
"A collection of objects indicating information of IP address of interface,
contain Ip address, Ip address mask and Ip address acquiring method."
::= { hwOamMacGroup 3 }
hwOamMacDisplayGroup OBJECT-GROUP
OBJECTS { hwOamMacDisplayAddress, hwOamMacDisplayType, hwOamMacDisplayVsiName,hwOamMacDisplayAgeTime,hwOamMacDisplayLsrId}
STATUS current
DESCRIPTION
"A collection of objects indicating information of IP address of interface,
contain Ip address, Ip address mask and Ip address acquiring method."
::= { hwOamMacGroup 4 }
-- ===========================================================================
-- hwVpnCfgPing
-- ===========================================================================
hwVpnCfgPing OBJECT IDENTIFIER ::= { vpndiagnostics 2 }
hwVpnCfgPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVpnCfgPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwVpnCfgPingTable."
::= { hwVpnCfgPing 1 }
hwVpnCfgPingEntry OBJECT-TYPE
SYNTAX HwVpnCfgPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates that the index of this table is hwVpnCfgPingIndex."
INDEX { hwVpnCfgPingIndex }
::= { hwVpnCfgPingTable 1 }
HwVpnCfgPingEntry ::=
SEQUENCE {
hwVpnCfgPingIndex
Integer32,
hwVpnCfgPingPeerIpType
InetAddressType,
hwVpnCfgPingPeerIp
InetAddress,
hwVpnCfgPingVpnIdType
INTEGER,
hwVpnCfgPingVpnId
OCTET STRING,
hwVpnCfgPingPwId
Integer32,
hwVpnCfgPingTunnelUsed
INTEGER,
hwVpnCfgPingOperation
EnabledStatus,
hwVpnCfgPingResultDetail
INTEGER,
hwVpnCfgPingRowStatus
RowStatus,
hwVpnCfgPingSecondary
INTEGER,
hwVpnCfgPingIfName
DisplayString,
hwVpnCfgPingPwIdNew
Unsigned32
}
hwVpnCfgPingIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of an operation instance."
::= { hwVpnCfgPingEntry 1 }
hwVpnCfgPingPeerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of the peer IP address. It is used to identify the value type of hwVpnCfgPingPeerIp, which can be IPv4 or IPv6."
::= { hwVpnCfgPingEntry 2 }
hwVpnCfgPingPeerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the peer IP address."
::= { hwVpnCfgPingEntry 3 }
hwVpnCfgPingVpnIdType OBJECT-TYPE
SYNTAX INTEGER
{
martiniVPLS(1),
kompellaVPLS(2),
l3vpn(3),
pwe3(4),
martiniVLL(5),
bgpadVPLS(6),
unknown(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL."
::= { hwVpnCfgPingEntry 4 }
hwVpnCfgPingVpnId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL."
::= { hwVpnCfgPingEntry 5 }
hwVpnCfgPingPwId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0."
::= { hwVpnCfgPingEntry 6 }
hwVpnCfgPingTunnelUsed OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
localOnly(2),
remoteOnly(3),
localAndRemote(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the mode of forwarding request packets or response packets (such as tunnel forwarding)."
::= { hwVpnCfgPingEntry 7 }
hwVpnCfgPingOperation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates two values: enable(1) and disable(2). enable(1) indicates that the operation instance is started; disable(2) indicates that the operation instance is stopped."
::= { hwVpnCfgPingEntry 8 }
hwVpnCfgPingResultDetail OBJECT-TYPE
SYNTAX INTEGER
{
requestSentReplyRecieved(1),
requestSentReplyTimeout(2),
requestFailedReplyFailed(3),
noResult(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the result detail of ping operation."
::= { hwVpnCfgPingEntry 9 }
hwVpnCfgPingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status."
::= { hwVpnCfgPingEntry 10 }
hwVpnCfgPingSecondary OBJECT-TYPE
SYNTAX INTEGER
{
primary(0),
secondary(1),
unknown(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the local secondary PW."
::= { hwVpnCfgPingEntry 11 }
hwVpnCfgPingIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of the AC interface."
::= { hwVpnCfgPingEntry 12 }
hwVpnCfgPingPwIdNew OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.
Because hwVpnCfgPingPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295, this object
ranging from 0 to 4294967295 is therefore added."
::= { hwVpnCfgPingEntry 13 }
hwVpnCfgPingResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVpnCfgPingResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwVpnCfgPingResultTable."
::= { hwVpnCfgPing 2 }
hwVpnCfgPingResultEntry OBJECT-TYPE
SYNTAX HwVpnCfgPingResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation."
INDEX { hwVpnCfgPingIndex, hwVpnCfgPingResultLocation }
::= { hwVpnCfgPingResultTable 1 }
HwVpnCfgPingResultEntry ::=
SEQUENCE {
hwVpnCfgPingResultLocation
INTEGER,
hwVpnCfgPingResultVpnIdType
INTEGER,
hwVpnCfgPingResultVpnId
DisplayString,
hwVpnCfgPingResultDesc
DisplayString,
hwVpnCfgPingResultVpnAdminStatus
INTEGER,
hwVpnCfgPingResultOperStatus
INTEGER,
hwVpnCfgPingResultMtu
Integer32,
hwVpnCfgPingResultCeCount
Integer32,
hwVpnCfgPingResultActualIpType
InetAddressType,
hwVpnCfgPingResultActualIp
InetAddress,
hwVpnCfgPingResultPeerIpType
InetAddressType,
hwVpnCfgPingResultPeerIp
InetAddress,
hwVpnCfgPingResultPwId
Integer32,
hwVpnCfgPingResultPeType
INTEGER,
hwVpnCfgPingResultVcType
HWL2VpnVcEncapsType,
hwVpnCfgPingResultLabelIn
Integer32,
hwVpnCfgPingResultLableOut
Integer32,
hwVpnCfgPingResultControlWord
INTEGER,
hwVpnCfgPingResultPriOrSec
INTEGER,
hwVpnCfgPingResultVplsID
OCTET STRING,
hwVpnCfgPingResultRD
OCTET STRING,
hwVpnCfgPingResultPwIdNew
Unsigned32
}
hwVpnCfgPingResultLocation OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates two values: local(1) and remote(2). local(1) indicates configurations of the local end displayed in the probe result. remote(2) indicates configurations of the peer end displayed in the probe result."
::= { hwVpnCfgPingResultEntry 1 }
hwVpnCfgPingResultVpnIdType OBJECT-TYPE
SYNTAX INTEGER
{
martiniVPLS(1),
kompellaVPLS(2),
l3vpn(3),
pwe3(4),
martiniVLL(5),
bgpadVPLS(6),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL."
::= { hwVpnCfgPingResultEntry 2 }
hwVpnCfgPingResultVpnId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL."
::= { hwVpnCfgPingResultEntry 3 }
hwVpnCfgPingResultDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the VPN."
::= { hwVpnCfgPingResultEntry 4 }
hwVpnCfgPingResultVpnAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the management status of the VPN: up(1), down(2), and unknown(255)."
::= { hwVpnCfgPingResultEntry 5 }
hwVpnCfgPingResultOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operation status of the VPN: up(1), down(2), and unknown(255)."
::= { hwVpnCfgPingResultEntry 6 }
hwVpnCfgPingResultMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MTU value. The object represents the MTU value of the AC interface when the VPN type is PWE3 or Martini VLL, represents the MTU value of the VSI when the VPN type is VPLS. If the value of the object cannot be obtained, the object value is considered as 0."
::= { hwVpnCfgPingResultEntry 7 }
hwVpnCfgPingResultCeCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of CEs."
::= { hwVpnCfgPingResultEntry 8 }
hwVpnCfgPingResultActualIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of the IP address of the PW on the local PE. It is used to identify the value type of hwVpnCfgPingResultActualIp."
::= { hwVpnCfgPingResultEntry 9 }
hwVpnCfgPingResultActualIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IP address of the PW on the local PE."
::= { hwVpnCfgPingResultEntry 10 }
hwVpnCfgPingResultPeerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of the IP address of the PW on the peer PE. It is used to identify the value type of hwVpnCfgPingResultPeerIP."
::= { hwVpnCfgPingResultEntry 11 }
hwVpnCfgPingResultPeerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IP address of the PW on the peer PE."
::= { hwVpnCfgPingResultEntry 12 }
hwVpnCfgPingResultPwId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates PW-ID."
::= { hwVpnCfgPingResultEntry 13 }
hwVpnCfgPingResultPeType OBJECT-TYPE
SYNTAX INTEGER
{
upe(1),
spe(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of the PE (Whether the PE is an SPE.)"
::= { hwVpnCfgPingResultEntry 14 }
hwVpnCfgPingResultVcType OBJECT-TYPE
SYNTAX HWL2VpnVcEncapsType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VC type."
::= { hwVpnCfgPingResultEntry 15 }
hwVpnCfgPingResultLabelIn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the incoming label of the interface at the PW side."
::= { hwVpnCfgPingResultEntry 16 }
hwVpnCfgPingResultLableOut OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the outgoing label of the interface at the PW side."
::= { hwVpnCfgPingResultEntry 17 }
hwVpnCfgPingResultControlWord OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the keyword control-word is configured."
::= { hwVpnCfgPingResultEntry 18 }
hwVpnCfgPingResultPriOrSec OBJECT-TYPE
SYNTAX INTEGER
{
primary(0),
secondary(1),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the local PW is a primary PW or a secondary PW."
::= { hwVpnCfgPingResultEntry 19 }
hwVpnCfgPingResultVplsID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the virtual private LAN service id."
::= { hwVpnCfgPingResultEntry 20}
hwVpnCfgPingResultRD OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the route distinguisher."
::= { hwVpnCfgPingResultEntry 21 }
hwVpnCfgPingResultPwIdNew OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates PW-ID. Because hwVpnCfgPingResultPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295,
this object ranging from 0 to 4294967295 is therefore added."
::= { hwVpnCfgPingResultEntry 22 }
hwVpnCfgPingConformance OBJECT IDENTIFIER ::= { hwVpnCfgPing 3 }
hwVpnCfgPingGroups OBJECT IDENTIFIER ::= { hwVpnCfgPingConformance 1 }
hwVpnCfgPingCompliances OBJECT IDENTIFIER ::= { hwVpnCfgPingConformance 2 }
hwVpnCfgPingCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { hwVpnCfgPingGroup, hwVpnCfgPingResultGroup, hwVpnCfgPingResultIRtGroup, hwVpnCfgPingResultERtGroup }
::= { hwVpnCfgPingCompliances 1 }
hwVpnCfgPingGroup OBJECT-GROUP
OBJECTS { hwVpnCfgPingPeerIpType, hwVpnCfgPingPeerIp, hwVpnCfgPingVpnIdType, hwVpnCfgPingVpnId, hwVpnCfgPingPwId,
hwVpnCfgPingTunnelUsed, hwVpnCfgPingOperation, hwVpnCfgPingResultDetail, hwVpnCfgPingRowStatus, hwVpnCfgPingIfName,
hwVpnCfgPingSecondary, hwVpnCfgPingPwIdNew }
STATUS current
DESCRIPTION
"hwVpnCfgPingGroup."
::= { hwVpnCfgPingGroups 1 }
hwVpnCfgPingResultGroup OBJECT-GROUP
OBJECTS { hwVpnCfgPingResultVpnIdType, hwVpnCfgPingResultVpnId, hwVpnCfgPingResultDesc, hwVpnCfgPingResultVpnAdminStatus, hwVpnCfgPingResultOperStatus,
hwVpnCfgPingResultMtu, hwVpnCfgPingResultCeCount, hwVpnCfgPingResultActualIpType, hwVpnCfgPingResultActualIp, hwVpnCfgPingResultPeerIpType,
hwVpnCfgPingResultPeerIp, hwVpnCfgPingResultPwId, hwVpnCfgPingResultPeType, hwVpnCfgPingResultVcType, hwVpnCfgPingResultLabelIn,
hwVpnCfgPingResultLableOut, hwVpnCfgPingResultControlWord, hwVpnCfgPingResultPriOrSec, hwVpnCfgPingResultVplsID, hwVpnCfgPingResultRD, hwVpnCfgPingResultPwIdNew}
STATUS current
DESCRIPTION
"hwVpnCfgPingResultGroup."
::= { hwVpnCfgPingGroups 2 }
hwVpnCfgPingResultIRtGroup OBJECT-GROUP
OBJECTS { hwVpnCfgPingResultIRtIndex , hwVpnCfgPingResultIRt }
STATUS current
DESCRIPTION
"hwVpnCfgPingResultIRtGroup."
::= { hwVpnCfgPingGroups 3 }
hwVpnCfgPingResultERtGroup OBJECT-GROUP
OBJECTS { hwVpnCfgPingResultERtIndex , hwVpnCfgPingResultERt }
STATUS current
DESCRIPTION
"hwVpnCfgPingResultERtGroup."
::= { hwVpnCfgPingGroups 4 }
hwVpnCfgPingResultIRtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVpnCfgPingResultIRtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwVpnCfgPingResultIRtTable."
::= { hwVpnCfgPing 4 }
hwVpnCfgPingResultIRtEntry OBJECT-TYPE
SYNTAX HwVpnCfgPingResultIRtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation."
INDEX { hwVpnCfgPingIndex, hwVpnCfgPingResultLocation, hwVpnCfgPingResultIRtIndex }
::= { hwVpnCfgPingResultIRtTable 1 }
HwVpnCfgPingResultIRtEntry ::=
SEQUENCE {
hwVpnCfgPingResultIRtIndex
Integer32,
hwVpnCfgPingResultIRt
OCTET STRING
}
hwVpnCfgPingResultIRtIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of an import vpn target."
::= { hwVpnCfgPingResultIRtEntry 1 }
hwVpnCfgPingResultIRt OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the import vpn target."
::= { hwVpnCfgPingResultIRtEntry 2 }
hwVpnCfgPingResultERtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVpnCfgPingResultERtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwVpnCfgPingResultERtTable."
::= { hwVpnCfgPing 5 }
hwVpnCfgPingResultERtEntry OBJECT-TYPE
SYNTAX HwVpnCfgPingResultERtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation."
INDEX { hwVpnCfgPingIndex, hwVpnCfgPingResultLocation, hwVpnCfgPingResultERtIndex }
::= { hwVpnCfgPingResultERtTable 1 }
HwVpnCfgPingResultERtEntry ::=
SEQUENCE {
hwVpnCfgPingResultERtIndex
Integer32,
hwVpnCfgPingResultERt
OCTET STRING
}
hwVpnCfgPingResultERtIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of an export vpn target.."
::= { hwVpnCfgPingResultERtEntry 1 }
hwVpnCfgPingResultERt OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the export vpn target."
::= { hwVpnCfgPingResultERtEntry 2 }
END
--
-- HUAWEI-VPN-DIAGNOSTICS-MIB.mib
--