mibs/MIBS/huawei/HUAWEI-WLAN-CAPWAP-MIB
2023-12-05 12:25:34 +01:00

508 lines
16 KiB
Plaintext

-- ============================================================================
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: The mib is used for capwap configuration.
-- Reference:
-- Version: V1.08
-- ============================================================================
-- Module definition
HUAWEI-WLAN-CAPWAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwWlan
FROM HUAWEI-WLAN-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, Counter64, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress, RowStatus, DateAndTime
FROM SNMPv2-TC;
--1.3.6.1.4.1.2011.6.139.9
hwWlanCapwap MODULE-IDENTITY
LAST-UPDATED "201904230912Z" -- Apr 23, 2019 at 09:12 GMT
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"Modify the enumerated values and property of the node hwWlanCapwapIpv6Enable at the WMPV1R19C00 of WMP version."
REVISION "201904230912Z" -- Apr 23, 2019 at 09:12 GMT
DESCRIPTION
"Add the description of the ipv4Address and ipv6Address."
REVISION "201812281652Z" -- Dec 28, 2018 at 16:52 GMT
DESCRIPTION
"The MIB module defines the ap capwap operation."
REVISION "201812212132Z" -- Dec 21, 2018 at 21:23 GMT
DESCRIPTION
"Add capwap ipv4 address and ipv6 address."
REVISION "201702061708Z" -- Feb 06, 2017 at 17:08 GMT
DESCRIPTION
"Add capwap data-link dtls switch."
REVISION "201610121406Z" -- Oct 12, 2016 at 14:06 GMT
DESCRIPTION
"Add capwap message-integrity psk switch."
REVISION "201602151709Z" -- Feb 15, 2016 at 17:09 GMT
DESCRIPTION
"Add capwap message-integrity psk and sensitive-info psk."
REVISION "201511302009Z" -- Nov 30, 2015 at 20:09 GMT
DESCRIPTION
"Add capwap multi-source operation."
REVISION "201505111452Z" -- May 11, 2015 at 14:52 GMT
DESCRIPTION
"Add the description of mib nodes."
REVISION "201502021452Z" -- February 2, 2015 at 14:52 GMT
DESCRIPTION
"
V1.00, Inital version.
"
::= { hwWlan 9 }
--
--Node definitions
--
--1.3.6.1.4.1.2011.6.139.9.1
hwWlanCapwapSourceInterface OBJECT IDENTIFIER ::= { hwWlanCapwap 1 }
--1.3.6.1.4.1.2011.6.139.9.1.1
hwWlanCapwapSourceInterfaceValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interface number when hwWlanCapwapSourceInterfaceMethod is set to vlanif(2) or loopback(3)."
::= { hwWlanCapwapSourceInterface 1 }
--1.3.6.1.4.1.2011.6.139.9.1.2
hwWlanCapwapSourceInterfaceMethod OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
vlanif(2),
loopback(3),
ipaddress(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"operation method of capwap source interface.It can be set
default(1): use default setting
vlanif(2): use vlanif interface
loopback(3): use loopback interface
ipaddress(4):user ip address
"
::= { hwWlanCapwapSourceInterface 2 }
--1.3.6.1.4.1.2011.6.139.9.1.3
hwWlanCapwapSourceIPv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If hwWlanCapwapSourceInterfaceMethod is set to ipaddress(4), this object is used to identify the IP address of the source port."
::= { hwWlanCapwapSourceInterface 3 }
-- 1.3.6.1.4.1.2011.6.139.9.1.4
hwWlanCapwapSourceIPv6Address OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If hwWlanCapwapSourceInterfaceMethod is set to ipaddress(6), this object is used to identify the IP address of the source port."
::= { hwWlanCapwapSourceInterface 4 }
-- 1.3.6.1.4.1.2011.6.139.9.2
hwWlanCapwapSysPara OBJECT IDENTIFIER ::= { hwWlanCapwap 2 }
--1.3.6.1.4.1.2011.6.139.9.2.1
hwWlanCapwapDtlsSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1) ,
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the global DTLS function. The default value is 1: enable 2: disable."
::= { hwWlanCapwapSysPara 1 }
--1.3.6.1.4.1.2011.6.139.9.2.2
hwWlanCapwapDtlsPsk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device"
::= { hwWlanCapwapSysPara 2 }
--1.3.6.1.4.1.2011.6.139.9.2.3
hwWlanCapwapDtlsDefaultPskSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1) ,
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 3 }
--1.3.6.1.4.1.2011.6.139.9.2.4
hwWlanCapwapIpv6Enable OBJECT-TYPE
SYNTAX INTEGER
{
ipv4(1) ,
ipv6(2) ,
doubleStack(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Work mode of capwap source. It can be set
ipv4(1): capwap source just can be configed to ipv4 source.
ipv6(2): capwap source just can be configed to ipv6 source.
doubleStack(3): capwap source can be configed to ipv4 and ipv6 source at the same time."
::= { hwWlanCapwapSysPara 4 }
--1.3.6.1.4.1.2011.6.139.9.2.5
hwWlanCapwapInterControllerDtlsEncrpyt OBJECT-TYPE
SYNTAX INTEGER
{
disable(1) ,
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 5 }
--1.3.6.1.4.1.2011.6.139.9.2.6
hwWlanCapwapInterControllerDtlsPsk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 6 }
--1.3.6.1.4.1.2011.6.139.9.2.7
hwCapwapEchoInterval OBJECT-TYPE
SYNTAX Integer32 (3..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 7 }
--1.3.6.1.4.1.2011.6.139.9.2.8
hwCapwapEchoTimes OBJECT-TYPE
SYNTAX Integer32 (2..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 8 }
--1.3.6.1.4.1.2011.6.139.9.2.9
hwWlanCapwapControlPriorityLocal OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 9 }
--1.3.6.1.4.1.2011.6.139.9.2.10
hwWlanCapwapControlPriorityRemote OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 10 }
--1.3.6.1.4.1.2011.6.139.9.2.11
hwWlanCapwapSensitiveInfoPsk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device"
::= { hwWlanCapwapSysPara 11 }
--1.3.6.1.4.1.2011.6.139.9.2.12
hwWlanCapwapInterControllerSensitiveInfoPsk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 12 }
--1.3.6.1.4.1.2011.6.139.9.2.13
hwWlanCapwapMessageIntegrityPsk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device"
::= { hwWlanCapwapSysPara 13 }
--1.3.6.1.4.1.2011.6.139.9.2.14
hwWlanCapwapInterControllerMessageIntegrityPsk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 14 }
--1.3.6.1.4.1.2011.6.139.9.2.15
hwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1) ,
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 15 }
--1.3.6.1.4.1.2011.6.139.9.2.16
hwWlanCapwapMsgCheckSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1) ,
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 16 }
--1.3.6.1.4.1.2011.6.139.9.2.17
hwWlanCapwapInterControllerMsgCheckSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1) ,
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device."
::= { hwWlanCapwapSysPara 17 }
--1.3.6.1.4.1.2011.6.139.9.2.18
hwWlanCapwapDtlsDataSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1) ,
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the global DTLS function of data-link. The default value is 1: disable."
::= { hwWlanCapwapSysPara 18 }
--1.3.6.1.4.1.2011.6.139.9.2.19
hwWlanCapwapInterControllerDtlsDataSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1) ,
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the inter-controller DTLS function of data-link. The default value is 1: disable."
::= { hwWlanCapwapSysPara 19 }
-- 1.3.6.1.4.1.2011.6.139.9.3
hwWlanCapwapSource OBJECT IDENTIFIER ::= { hwWlanCapwap 3 }
hwWlanCapwapSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWlanCapwapSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { hwWlanCapwapSource 1 }
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1
hwWlanCapwapSourceEntry OBJECT-TYPE
SYNTAX HwWlanCapwapSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwWlanCapwapSourceIndex }
::= { hwWlanCapwapSourceTable 1 }
HwWlanCapwapSourceEntry ::=
SEQUENCE {
hwWlanCapwapSourceIndex
Integer32,
hwWlanCapwapSourceMethod
INTEGER,
hwWlanCapwapSourceValue
Integer32,
hwWlanCapwapSourceRowStatus
RowStatus,
hwWlanCapwapSourceIPv4
IpAddress,
hwWlanCapwapSourceIPv6
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1.1
hwWlanCapwapSourceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the index of capwap source interface."
::= { hwWlanCapwapSourceEntry 1 }
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1.2
hwWlanCapwapSourceMethod OBJECT-TYPE
SYNTAX INTEGER
{
vlanif(2),
loopback(3),
ipv4Address(4),
ipv6Address(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Operation method of capwap source interface.It can be set
vlanif(2): use vlanif interface
loopback(3): use loopback interface
ipv4Address(4): use ipv4 adddress
ipv6Address(5): use ipv6 address."
::= { hwWlanCapwapSourceEntry 2 }
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1.3
hwWlanCapwapSourceValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the value of capwap source interface."
::= { hwWlanCapwapSourceEntry 3 }
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1.4
hwWlanCapwapSourceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status: mainly to support to add or delete the relationship of the interface and the capwap-source.
createAndGo(4): add a relationship.
destroy(6): delete the relationship."
::= { hwWlanCapwapSourceEntry 4 }
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1.5
hwWlanCapwapSourceIPv4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the value of capwap source ipv4 address."
::= { hwWlanCapwapSourceEntry 5 }
-- 1.3.6.1.4.1.2011.6.139.9.3.1.1.6
hwWlanCapwapSourceIPv6 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the value of capwap source ipv6 address."
::= { hwWlanCapwapSourceEntry 6 }
-- 1.3.6.1.4.1.2011.6.139.9.4
hwWlanCapwapConformance OBJECT IDENTIFIER ::= { hwWlanCapwap 4 }
-- 1.3.6.1.4.1.2011.6.139.9.4.1
hwWlanCapwapCompliances OBJECT IDENTIFIER ::= { hwWlanCapwapConformance 1 }
-- 1.3.6.1.4.1.2011.6.139.9.4.1.1
hwWlanCapwapCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE
MANDATORY-GROUPS { hwWlanCapwapSourceInterfaceGroup, hwWlanCapwapSysParaGroup }
::= { hwWlanCapwapCompliances 1 }
-- 1.3.6.1.4.1.2011.6.139.9.4.2
hwWlanCapwapObjectGroups OBJECT IDENTIFIER ::= { hwWlanCapwapConformance 2 }
-- 1.3.6.1.4.1.2011.6.139.9.4.2.1
hwWlanCapwapSourceInterfaceGroup OBJECT-GROUP
OBJECTS { hwWlanCapwapSourceInterfaceValue, hwWlanCapwapSourceInterfaceMethod, hwWlanCapwapSourceIPv4Address }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanCapwapObjectGroups 1 }
-- 1.3.6.1.4.1.2011.6.139.9.4.2.2
hwWlanCapwapSysParaGroup OBJECT-GROUP
OBJECTS { hwWlanCapwapDtlsSwitch, hwWlanCapwapDtlsPsk, hwWlanCapwapDtlsDefaultPskSwitch, hwWlanCapwapIpv6Enable, hwWlanCapwapInterControllerDtlsEncrpyt,
hwWlanCapwapInterControllerDtlsPsk, hwCapwapEchoInterval, hwCapwapEchoTimes, hwWlanCapwapControlPriorityLocal, hwWlanCapwapControlPriorityRemote,
hwWlanCapwapSensitiveInfoPsk, hwWlanCapwapInterControllerSensitiveInfoPsk, hwWlanCapwapMessageIntegrityPsk, hwWlanCapwapInterControllerMessageIntegrityPsk,
hwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch, hwWlanCapwapMsgCheckSwitch, hwWlanCapwapInterControllerMsgCheckSwitch,
hwWlanCapwapDtlsDataSwitch, hwWlanCapwapInterControllerDtlsDataSwitch }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanCapwapObjectGroups 2 }
-- 1.3.6.1.4.1.2011.6.139.9.4.2.3
hwWlanCapwapSourceGroup OBJECT-GROUP
OBJECTS {hwWlanCapwapSourceMethod, hwWlanCapwapSourceValue, hwWlanCapwapSourceRowStatus}
STATUS current
DESCRIPTION
"Description."
::= { hwWlanCapwapObjectGroups 3 }
END
--
-- HUAWEI-WLAN-CAPWAP-MIB.mib
--