david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/ibm/IBM-OSA-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

2950 lines
110 KiB
Plaintext
Raw Blame History

--===================================================================
--
-- May 23, 2002
--
-- Joel Goldman, Internet: jgoldman@us.ibm.com
-- IBM Server Group
-- Poughkeepsie, NY
--
-- Program name : IBM OSA-Express Direct SNMP Enterprise
-- Specific MIB ASN.1 Description file
--
-- SW Requires: IBM Communications Server for z/OS Version 1 Release 4
-- -or-
-- Linux ucd-snmp 4.2.x package
-- IBM OSA-Express device driver QETH (Rev. 1.239 or higher)
-- IBM osasnmpd subagent Ver. 1.1 or higher
--
-- HW Requires: OSA-Express running in QDIO mode with
-- Licensed Internal Code level 3.0A or higher
--
-- Description: Manages the IBM Open Systems Adapter Express CHPID
-- Enterprise Specific MIB
--
-- Latest MIB: Located at website
-- www.ibm.com/servers/resourcelink
-- logon on to Resourcelink
-- select "Library"
-- look to the right side under "Library short cuts" and select "OSA"
-- select the "OSA-Express Direct SNMP MIB module"
--
--===================================================================
IBM-OSA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
-- NOTIFICATION-TYPE, IpAddress, TimeTicks, Unsigned32
enterprises, Integer32, Gauge32, Counter32, Counter64
FROM SNMPv2-SMI -- RFC2578
-- TEXTUAL-CONVENTION, DateAndTime, TruthValue, RowStatus,
DisplayString
FROM SNMPv2-TC -- RFC2579
-- NOTIFICATION-GROUP
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- RFC2580
-- SnmpAdminString
-- FROM SNMP-FRAMEWORK-MIB
-- RFC2571
ifIndex
FROM IF-MIB -- RFC2863
;
ibmOSAMib MODULE-IDENTITY
LAST-UPDATED "200205230000Z"
ORGANIZATION "IBM eServer Development"
CONTACT-INFO
" Joel Goldman
Postal: International Business Machines Corporation
2455 South Road
Dept. B44G/Bldg. 706
Poughkeepsie, NY 12601
USA
Tel: +1 845 435 5501
Internet: jgoldman@us.ibm.com"
DESCRIPTION
"The IBM Enterprise Specific MIB definitions for
enabling management of an IBM OSA-Express feature.
Licensed Materials - Property of IBM
Restricted Materials of IBM
5694-A01 (C) Copyright IBM Corp. 2002
US Government Users Restricted Rights -
Use, duplication or disclosure restricted by
GSA ADP Schedule Contract with IBM Corp."
REVISION "200205230000Z"
DESCRIPTION
"Editorial revisions"
REVISION "200203260800Z"
DESCRIPTION
"Initial release"
::= { ibmProd 188 }
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
ibmProd OBJECT IDENTIFIER ::= { ibm 6 }
-- ibmOSAMibTraps OBJECT IDENTIFIER ::= { ibmOSAMib 0 }
ibmOSAMibObjects OBJECT IDENTIFIER ::= { ibmOSAMib 1 }
ibmOSAMibConformance OBJECT IDENTIFIER ::= { ibmOSAMib 2 }
--===================================================================
-- IbmOSAMib
--===================================================================
-- IbmOSAExpChannelTable
ibmOSAExpChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmOSAExpChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indexed by ifIndex. One entry in this table will exist per
OSA Device Interface."
::= { ibmOSAMibObjects 1 }
ibmOSAExpChannelEntry OBJECT-TYPE
SYNTAX IbmOSAExpChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single entry in the ibmOSAExpChannelTable.
Indexed by the ifIndex of the corresponding Device interface."
INDEX { ifIndex }
::= { ibmOSAExpChannelTable 1 }
IbmOSAExpChannelEntry ::=
SEQUENCE
{
ibmOSAExpChannelNumber OCTET STRING,
ibmOSAExpChannelType INTEGER,
ibmOSAExpChannelHdwLevel INTEGER,
ibmOSAExpChannelSubType INTEGER,
ibmOSAExpChannelShared INTEGER,
ibmOSAExpChannelNodeDesc OCTET STRING,
ibmOSAExpChannelProcCodeLevel OCTET STRING,
ibmOSAExpChannelPCIBusUtil1Min Integer32,
ibmOSAExpChannelProcUtil1Min Integer32,
ibmOSAExpChannelPCIBusUtil5Min Integer32,
ibmOSAExpChannelProcUtil5Min Integer32,
ibmOSAExpChannelPCIBusUtilHour Integer32,
ibmOSAExpChannelProcUtilHour Integer32
}
ibmOSAExpChannelNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CHPID corresponding to this ifIndex."
::= { ibmOSAExpChannelEntry 1 }
ibmOSAExpChannelType OBJECT-TYPE
SYNTAX INTEGER {
osaDirectExpress (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of channel for this interface.
OSA Direct Express has a value of 17."
::= { ibmOSAExpChannelEntry 2 }
ibmOSAExpChannelHdwLevel OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
osaExp150(2),
osaExp175(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware model of the channel.
The value oasExp150(2) indicates a hardware level of 1.50.
The value oasExp175(3) indicates a hardware level of 1.75."
::= { ibmOSAExpChannelEntry 3 }
ibmOSAExpChannelSubType OBJECT-TYPE
SYNTAX INTEGER
{
unknown (1),
gigabitEthernet (65),
fastEthernet (81),
tokenRing (82),
atmEmulatedEthernet (2304)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of OSA feature present."
::= { ibmOSAExpChannelEntry 4 }
ibmOSAExpChannelShared OBJECT-TYPE
SYNTAX INTEGER
{
notShared (0),
shared (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An OSA-Express feature can be shared across multiple LPs.
This object indicates if this feature is currently being
shared between LPs"
::= { ibmOSAExpChannelEntry 5 }
ibmOSAExpChannelNodeDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Node Descriptor of the OSA feature.
It represents the ND obtained from the Channel Subsystem.
Bits Name Flag is first byte
char(1) Validity Valid - always '20'x
char(1) Reserved Reserved by architecture
char(1) Class Class for subsystem node
char(1) CHPID CHP ID for specified int
char(6) TypeNum Type number of the SDC
char(3) ModelNum Model number in the form of 3
EBCDIC OCTETS
char(3) Manufacturer Manufacturer in the form of 3
EBCDIC OCTETS
char(2) Mfr Plant Plant of manufacture-2 digit code
char(12)SeqNum Sequence number (12 EBCDIC OCTETS)
char(2) Tag Tag"
::= { ibmOSAExpChannelEntry 6 }
ibmOSAExpChannelProcCodeLevel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the firmware (or micro code level) of the OSA
feature. For example, OSA code level 05.6A would be
represented as 0x056A."
::= { ibmOSAExpChannelEntry 8 }
ibmOSAExpChannelPCIBusUtil1Min OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over a 1 minute interval, of the percentage
of time that the PCI bus was utilized to transfer data.
It does not include idle time or time used by
routine maintenance tasks. The range for this value
is from 0 to 100%."
::= { ibmOSAExpChannelEntry 9 }
ibmOSAExpChannelProcUtil1Min OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over a 1 minute interval, of the percentage
of time that the CHPID Processor was utilized to transfer
data. It does not include idle time or time used by
routine maintenance tasks. The range for this value
is from 0 to 100%."
::= { ibmOSAExpChannelEntry 10 }
ibmOSAExpChannelPCIBusUtil5Min OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over a 5 minute interval, of the percentage
of time that the PCI bus was utilized to transfer data.
It does not include idle time or time used by
routine maintenance tasks. The range for this value
is from 0 to 100%."
::= { ibmOSAExpChannelEntry 11 }
ibmOSAExpChannelProcUtil5Min OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over a 5 minute interval, of the percentage
of time that the CHPID Processor was utilized to transfer
data. It does not include idle time or time used by
routine maintenance tasks. The range for this value
is from 0 to 100%."
::= { ibmOSAExpChannelEntry 12 }
ibmOSAExpChannelPCIBusUtilHour OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over an hour interval, of the percentage
of time that the PCI bus was utilized to transfer data.
It does not include idle time or time used by
routine maintenance tasks."
::= { ibmOSAExpChannelEntry 13 }
ibmOSAExpChannelProcUtilHour OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over an hour interval, of the percentage
of time that the CHPID Processor was utilized to transfer
data. It does not include idle time or time used by
routine maintenance tasks. The range for this value
is from 0 to 100%."
::= { ibmOSAExpChannelEntry 14 }
-- ibmOSAExpPerfTable
ibmOSAExpPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmOSAExpPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides performance information for each
Logical Partition (LP) the OSA can connect to."
::= { ibmOSAMibObjects 2 }
ibmOSAExpPerfEntry OBJECT-TYPE
SYNTAX IbmOSAExpPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single entry for a single LP
in the ibmOSAExpPerfTable.
Indexed by the ifIndex of the corresponding Device interface."
INDEX { ifIndex }
::= { ibmOSAExpPerfTable 1 }
IbmOSAExpPerfEntry ::=
SEQUENCE
{
ibmOSAExpPerfDataLP0 OCTET STRING,
ibmOSAExpPerfDataLP1 OCTET STRING,
ibmOSAExpPerfDataLP2 OCTET STRING,
ibmOSAExpPerfDataLP3 OCTET STRING,
ibmOSAExpPerfDataLP4 OCTET STRING,
ibmOSAExpPerfDataLP5 OCTET STRING,
ibmOSAExpPerfDataLP6 OCTET STRING,
ibmOSAExpPerfDataLP7 OCTET STRING,
ibmOSAExpPerfDataLP8 OCTET STRING,
ibmOSAExpPerfDataLP9 OCTET STRING,
ibmOSAExpPerfDataLP10 OCTET STRING,
ibmOSAExpPerfDataLP11 OCTET STRING,
ibmOSAExpPerfDataLP12 OCTET STRING,
ibmOSAExpPerfDataLP13 OCTET STRING,
ibmOSAExpPerfDataLP14 OCTET STRING,
ibmOSAExpPerfDataLP15 OCTET STRING
}
ibmOSAExpPerfDataLP0 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 0.
The 40 bytes of hex data that are returned are decoded
as follows:
Offset Bytes Field Meaning
0 4 LP Number
4 4 Processor Util 1 Minute
8 4 In Kbytes Rate 1 Minute
12 4 Out Kbytes Rate 1 Minute
16 4 Processor Util 5 Minutes
20 4 In Kbytes Rate 5 Minutes
24 4 Out Kbytes Rate 5 Minutes
28 4 Processor Util 60 Minutes
32 4 In Kbytes Rate 60 Minutes
36 4 Out Kbytes Rate 60 Minutes
The Processor Util 1 Minute is defined as follows:
The average, over a 1 minute interval, of the percentage
of time that the CHPID Processor was utilized to
transfer data for a specific LP. It does not include
idle time or time used by routine maintenance tasks.
The range for this value is from 0 to 100%.
The In Kbytes Rate 1 Minute is defined as follows:
The average, over a 1 minute interval, of the number of
inbound kilobytes processed for a specific LP.
The Out Kbytes Rate 1 Minute is defined as follows:
The average, over a 1 minute interval, of the number of
outbound kilobytes processed for a specific LP.
The 5 and 60 minute fields are defined similar to the
1 minute fields, but pertain to intervals of 5 and 60
minutes."
::= { ibmOSAExpPerfEntry 1 }
ibmOSAExpPerfDataLP1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 1.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 2 }
ibmOSAExpPerfDataLP2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 2.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 3 }
ibmOSAExpPerfDataLP3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 3.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 4 }
ibmOSAExpPerfDataLP4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 4.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 5 }
ibmOSAExpPerfDataLP5 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 5.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 6 }
ibmOSAExpPerfDataLP6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 6.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 7 }
ibmOSAExpPerfDataLP7 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 7.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 8 }
ibmOSAExpPerfDataLP8 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 8.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 9 }
ibmOSAExpPerfDataLP9 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 9.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 10 }
ibmOSAExpPerfDataLP10 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 10.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 11 }
ibmOSAExpPerfDataLP11 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 11.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 12 }
ibmOSAExpPerfDataLP12 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 12.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 13 }
ibmOSAExpPerfDataLP13 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 13.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 14 }
ibmOSAExpPerfDataLP14 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 14.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 15 }
ibmOSAExpPerfDataLP15 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance data on this OSA for partition 15.
The 40 bytes of hex data that are returned are decoded
the same as for partition 0."
::= { ibmOSAExpPerfEntry 16 }
-- PE MIB Table starts here. This is for IBM use.
-- ibmOSAExpPETable
ibmOSAExpPETable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmOSAExpPEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides PE information to help IBM diagnose any
OSA problems."
::= { ibmOSAMibObjects 3 }
ibmOSAExpPEEntry OBJECT-TYPE
SYNTAX IbmOSAExpPEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single entry in the ibmOSAExpPETable.
Indexed by the ifIndex of the corresponding Device interface"
INDEX { ifIndex }
::= { ibmOSAExpPETable 1 }
IbmOSAExpPEEntry ::=
SEQUENCE
{
ibmOSAExpPEMaxSizeArpCache Integer32,
ibmOSAExpPEArpPendingEntries Gauge32,
ibmOSAExpPEArpActiveEntries Gauge32,
ibmOSAExpPEIPEntries Gauge32,
ibmOSAExpPEMulticastEntries Gauge32,
ibmOSAExpPEMulticastData OCTET STRING
}
ibmOSAExpPEMaxSizeArpCache OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size of the OSA ARP Cache"
::= { ibmOSAExpPEEntry 1 }
ibmOSAExpPEArpPendingEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of Pending entries in the ARP cache."
::= { ibmOSAExpPEEntry 2 }
ibmOSAExpPEArpActiveEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This the number of active ARP entries."
::= { ibmOSAExpPEEntry 3 }
ibmOSAExpPEIPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP addresses known to the OSA
For OSD chpids, this is the maximum # of IP addresses
that are:
- home ip addresses (Version 4 and Version 6)
- remote ip addresses in the arp cache (Version 4 only)
- multicast ip addresses that the OSA must accept inbound
data packets for (Version 4 and Version 6)"
::= { ibmOSAExpPEEntry 4 }
ibmOSAExpPEMulticastEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of IP multicast addresses currently
on the OSA"
::= { ibmOSAExpPEEntry 5 }
ibmOSAExpPEMulticastData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3360))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This contains information on the multicast entries that
are currently on the OSA. These are in a format that is
for IBM use only"
::= { ibmOSAExpPEEntry 6 }
-- ibmOSAExpEthPortTable
ibmOSAExpEthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmOSAExpEthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the data associated with a port on an
OSA-Express Gigabit or Fast Ethernet OSA."
::= { ibmOSAMibObjects 4 }
ibmOSAExpEthPortEntry OBJECT-TYPE
SYNTAX IbmOSAExpEthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single entry in the ibmOSAExpEthPortTable.
Indexed by the ifIndex of the corresponding Device interface."
INDEX { ifIndex }
::= { ibmOSAExpEthPortTable 1 }
IbmOSAExpEthPortEntry ::=
SEQUENCE
{
ibmOsaExpEthPortNumber Integer32,
ibmOsaExpEthPortType INTEGER,
ibmOsaExpEthLanTrafficState INTEGER,
ibmOsaExpEthServiceMode INTEGER,
ibmOsaExpEthDisabledStatus BITS,
ibmOsaExpEthConfigName DisplayString,
ibmOsaExpEthConfigSpeedMode INTEGER,
ibmOsaExpEthActiveSpeedMode INTEGER,
ibmOsaExpEthMacAddrActive OCTET STRING,
ibmOsaExpEthMacAddrBurntIn OCTET STRING,
ibmOsaExpEthUserData DisplayString,
ibmOsaExpEthOutPackets Counter32,
ibmOsaExpEthInPackets Counter32,
ibmOsaExpEthInGroupFrames Counter32,
ibmOsaExpEthInBroadcastFrames Counter32,
ibmOsaExpEthPortName DisplayString,
ibmOsaExpEthInUnknownIPFrames Counter32,
ibmOsaExpEthGroupAddrTable OCTET STRING
}
ibmOsaExpEthPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port number for this port."
::= { ibmOSAExpEthPortEntry 1 }
ibmOsaExpEthPortType OBJECT-TYPE
SYNTAX INTEGER {
gigabitEthernet (65),
fastEthernet (81)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port type."
::= { ibmOSAExpEthPortEntry 2 }
ibmOsaExpEthLanTrafficState OBJECT-TYPE
SYNTAX INTEGER
{
undefined(0),
unavailable(1),
enabling(2),
disabling(3),
enabled(4),
disabled(5),
linkMonitor(6),
definitionError(7),
configuredOffline(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN state value ranges from 0 to 8. A value of 5,
disabled is further explained in object
ibmOsaExpEthDisabledStatus."
::= { ibmOSAExpEthPortEntry 3 }
ibmOsaExpEthServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
notInServiceMode (0),
inServiceMode (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the processor is in service mode
or not."
::= { ibmOSAExpEthPortEntry 4 }
ibmOsaExpEthDisabledStatus OBJECT-TYPE
SYNTAX BITS
{
reserved0 (0),
internalPortFailure (1),
reserved2 (2),
reserved3 (3),
reserved4 (4),
reserved5 (5),
portTemporarilyDisabled (6),
reserved7 (7),
reserved8 (8),
serviceProcessorRequest (9),
networkRequest (10),
osasfRequest (11),
configurationChange (12),
linkFailureThresholdExceeded (13),
reserved14 (14),
reserved15 (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the value of ibmOsaExpEthLanTrafficState is
NOT disabled, the value of this object will be zero.
When the value of ibmOsaExpEthLanTrafficState is
disabled(5), this object explains the reason for the
disabled state. The value for this object may be a
combination of the bits shown."
::= { ibmOSAExpEthPortEntry 5 }
ibmOsaExpEthConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..34))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the name of the configuration that is on the OSA.
It is set using OSA/SF. It is not used by OSA"
::= { ibmOSAExpEthPortEntry 6 }
ibmOsaExpEthConfigSpeedMode OBJECT-TYPE
SYNTAX INTEGER
{
notValidGigabit (-1),
autoNegotiate (0),
tenMbHalfDuplex (1),
tenMbFullDuplex (2),
oneHundredMbHalfDuplex (3),
oneHundredMbFullDuplex (4),
oneThousandMbFullDuplex (6)
}
UNITS "Megabits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured port speed. This field shows the speed
that was configured by the user for the OSA-Express
Fast Ethernet feature.
It is not used by OSA-Express Gigabit features
and will return -1 (FFFF)"
::= { ibmOSAExpEthPortEntry 7 }
ibmOsaExpEthActiveSpeedMode OBJECT-TYPE
SYNTAX INTEGER
{
unknown (0),
tenMbHalfDuplex (1),
tenMbFullDuplex (2),
oneHundredMbHalfDuplex (3),
oneHundredMbFullDuplex (4),
oneThousandMbFullDuplex (6)
}
UNITS "Megabits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual speed and mode the OSA is running in"
::= { ibmOSAExpEthPortEntry 8 }
ibmOsaExpEthMacAddrActive OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6 byte OCTET STRING which contains the current
MAC address in use on the adapter.
The values are in canonical format."
::= { ibmOSAExpEthPortEntry 9 }
ibmOsaExpEthMacAddrBurntIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6 byte OCTET STRING which contains the burned in
MAC address on the OSA.
The values are in canonical format."
::= { ibmOSAExpEthPortEntry 10 }
ibmOsaExpEthUserData OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Data set by the user. It is ignored by the OSA."
::= { ibmOSAExpEthPortEntry 11 }
ibmOsaExpEthOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of packets that have been transmitted
by the OSA since the last time the OSA port was reset"
::= { ibmOSAExpEthPortEntry 12 }
ibmOsaExpEthInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of packets that have been received
by the OSA since the last time the OSA port was reset"
::= { ibmOSAExpEthPortEntry 13 }
ibmOsaExpEthInGroupFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of multicast frames that have been
received by the OSA."
::= { ibmOSAExpEthPortEntry 14 }
ibmOsaExpEthInBroadcastFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of broadcast frames that have been
received by the OSA."
::= { ibmOSAExpEthPortEntry 15 }
ibmOsaExpEthPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the port as used by TCP/IP"
::= { ibmOSAExpEthPortEntry 16 }
ibmOsaExpEthInUnknownIPFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of non-IP received frames"
::= { ibmOSAExpEthPortEntry 17 }
ibmOsaExpEthGroupAddrTable OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the active Group Addresses.
An individual Group Address is 6 bytes long with an
additional 2 bytes of padding. There are 32 group
addresses."
::= { ibmOSAExpEthPortEntry 18 }
-- ibmOSAExpTRPortTable
ibmOSAExpTRPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmOSAExpTRPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the data associated with a port on an
OSA-Express token ring feature."
::= { ibmOSAMibObjects 5 }
ibmOSAExpTRPortEntry OBJECT-TYPE
SYNTAX IbmOSAExpTRPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single entry in the ibmOSAExpTRPortTable.
Indexed by the ifIndex of the corresponding Device interface."
INDEX { ifIndex }
::= { ibmOSAExpTRPortTable 1 }
IbmOSAExpTRPortEntry ::=
SEQUENCE
{
ibmOsaExpTRPortNumber Integer32,
ibmOsaExpTRPortType INTEGER,
ibmOsaExpTRLanTrafficState INTEGER,
ibmOsaExpTRServiceMode INTEGER,
ibmOsaExpTRDisabledStatus BITS,
ibmOsaExpTRConfigName DisplayString,
ibmOsaExpTRMacAddrActive OCTET STRING,
ibmOsaExpTRMacAddrBurntIn OCTET STRING,
ibmOsaExpTRConfigSpeedMode INTEGER,
ibmOsaExpTRActiveSpeedMode INTEGER,
ibmOsaExpTRUserData DisplayString,
ibmOsaExpTRPortName DisplayString,
ibmOsaExpTRGroupAddrTable OCTET STRING,
ibmOsaExpTRFunctionalAddr OCTET STRING,
ibmOsaExpTRRingStatus BITS,
ibmOsaExpTRAllowAccessPriority Integer32,
ibmOsaExpTREarlyTokenRelease INTEGER,
ibmOsaExpTRBeaconingAddress OCTET STRING,
ibmOsaExpTRUpstreamNeighbor OCTET STRING,
ibmOsaExpTRRingState INTEGER,
ibmOsaExpTRRingOpenStatus INTEGER,
ibmOsaExpTRPacketsTransmitted Counter32,
ibmOsaExpTRPacketsReceived Counter32,
ibmOsaExpTRLineErrorCount Counter32,
ibmOsaExpTRBurstErrorCount Counter32,
ibmOsaExpTRACErrorCount Counter32,
ibmOsaExpTRAbortTransErrorCount Counter32,
ibmOsaExpTRInternalErrorCount Counter32,
ibmOsaExpTRLostFrameErrorCount Counter32,
ibmOsaExpTRRcvCongestionCount Counter32,
ibmOsaExpTRFrameCopyErrorCount Counter32,
ibmOsaExpTRTokenErrorCount Counter32,
ibmOsaExpTRFullDuplexErrorCount Counter32,
ibmOsaExpTRSoftErrorCount Counter32,
ibmOsaExpTRHardErrorCount Counter32,
ibmOsaExpTRSignalLossErrorCount Counter32,
ibmOsaExpTRTransmitBeaconCount Counter32,
ibmOsaExpTRRecoveryCounter Counter32,
ibmOsaExpTRLobeWireFaultCount Counter32,
ibmOsaExpTRRemoveReceivedCount Counter32,
ibmOsaExpTRSingleStationCount Counter32
}
ibmOsaExpTRPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port number for this port."
::= { ibmOSAExpTRPortEntry 1 }
ibmOsaExpTRPortType OBJECT-TYPE
SYNTAX INTEGER {
tokenring(82)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port type."
::= { ibmOSAExpTRPortEntry 2 }
ibmOsaExpTRLanTrafficState OBJECT-TYPE
SYNTAX INTEGER
{
undefined(0),
unavailable(1),
enabling(2),
disabling(3),
enabled(4),
disabled(5),
linkMonitor(6),
definitionError(7),
configuredOffline(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN state value ranges from 0 to 8. A value of 5,
disabled is further explained in object
ibmOsaExpTRDisabledStatus"
::= { ibmOSAExpTRPortEntry 3 }
ibmOsaExpTRServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
notInServiceMode (0),
inServiceMode (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the processor is in service mode
or not."
::= { ibmOSAExpTRPortEntry 4 }
ibmOsaExpTRDisabledStatus OBJECT-TYPE
SYNTAX BITS
{
reserved0 (0),
internalPortFailure (1),
reserved2 (2),
reserved3 (3),
reserved4 (4),
reserved5 (5),
portTemporarilyDisabled (6),
reserved7 (7),
reserved8 (8),
serviceProcessorRequest (9),
networkRequest (10),
osasfRequest (11),
configurationChange (12),
linkFailureThresholdExceeded (13),
reserved14 (14),
reserved15 (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the value of ibmOsaExpTRLanTrafficState is
NOT disabled, the value of this object will be zero.
When the value of ibmOsaExpTRLanTrafficState is
disabled(5), this object explains the reason for the
disabled state. The value for this object may be a
combination of the bits shown."
::= { ibmOSAExpTRPortEntry 5 }
ibmOsaExpTRConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..34))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the name of the configuration that is on the OSA.
It is set using OSA/SF. It is not used by OSA"
::= { ibmOSAExpTRPortEntry 6 }
ibmOsaExpTRMacAddrActive OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6 byte OCTET STRING which contains the current
MAC address in use on the OSA."
::= { ibmOSAExpTRPortEntry 7 }
ibmOsaExpTRMacAddrBurntIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6 byte OCTET STRING which contains the burned in
MAC address on the OSA"
::= { ibmOSAExpTRPortEntry 8 }
ibmOsaExpTRConfigSpeedMode OBJECT-TYPE
SYNTAX INTEGER
{
autoNegotiate (0),
fourMbHalfDuplex (1),
fourMbFullDuplex (2),
sixteenMbHalfDuplex (3),
sixteenMbFullDuplex (4),
oneHundredMbFullDuplex (6)
}
UNITS "Megabits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured port speed. This field shows the speed
that was configured by the user for the OSA-Express
Token Ring feature."
::= { ibmOSAExpTRPortEntry 9 }
ibmOsaExpTRActiveSpeedMode OBJECT-TYPE
SYNTAX INTEGER
{
unknown (0),
fourMbHalfDuplex (1),
fourMbFullDuplex (2),
sixteenMbHalfDuplex (3),
sixteenMbFullDuplex (4),
oneHundredMbFullDuplex (6)
}
UNITS "Megabits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual speed and mode the OSA is running in"
::= { ibmOSAExpTRPortEntry 10 }
ibmOsaExpTRUserData OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Data set by the user. It is ignored by the OSA."
::= { ibmOSAExpTRPortEntry 11 }
ibmOsaExpTRPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the port as used by TCP/IP"
::= { ibmOSAExpTRPortEntry 12 }
ibmOsaExpTRGroupAddrTable OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the active Group Addresses.
An individual Group Address is 6 bytes long with an
additional 2 bytes of padding."
::= { ibmOSAExpTRPortEntry 13 }
ibmOsaExpTRFunctionalAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 4 byte OCTET STRING which contains the OSA-Express's
functional address."
::= { ibmOSAExpTRPortEntry 14 }
ibmOsaExpTRRingStatus OBJECT-TYPE
SYNTAX BITS
{
reserved0 (0),
reserved1 (1),
reserved2 (2),
reserved3 (3),
reserved4 (4),
reserved5 (5),
reserved6 (6),
reserved7 (7),
reserved8 (8),
reserved9 (9),
reserved10 (10),
reserved11 (11),
reserved12 (12),
reserved13 (13),
noStatusOpenNotCompleted (14),
reserved15 (15),
signalLoss (16),
hardError (17),
softError (18),
reserved19 (19),
lobeWireFault (20),
autoRemovalError (21),
fdxProtocol (22),
removeReceived (23),
counterOverflow (24),
singleStation (25),
ringRecovery (26),
sRCounterOverflow (27),
reserved29 (28),
openInFDXmode (29),
fourMbFullDuplex (30),
fourMbHalfDuplex (31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current interface status which can be used to diagnose
fluctuating problems that can occur on token rings after a
station has successfully been added to the ring.
Before an open is completed, this object has the value
for the 'noStatusOpenNotCompleted' condition.
The ibmOsaExpTRRingState and ibmOsaExpTRRingOpenStatus
objects provide for debugging problems when the station
can not even enter the ring.
The object's value is a sum of values,
one for each currently applicable condition.
This information is essentially from RFC 1231."
::= { ibmOSAExpTRPortEntry 15 }
ibmOsaExpTRAllowAccessPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the maximum token priority
the ring station defined by this entry in the
table is permitted to transmit."
::= { ibmOSAExpTRPortEntry 16 }
ibmOsaExpTREarlyTokenRelease OBJECT-TYPE
SYNTAX INTEGER
{
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the ring station supports early token release.
Only valid when port is running in 16Mb half duplex mode.
Otherwise it is always set to false (1)"
::= { ibmOSAExpTRPortEntry 17 }
ibmOsaExpTRBeaconingAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the node address of the NAUN as
reported in the most recently received Beacon MAC frame.
This field is valid when ibmOsaExpTRRingOpenStatus is
set to beaconing. Otherwise it is ignored"
::= { ibmOSAExpTRPortEntry 18 }
ibmOsaExpTRUpstreamNeighbor OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC-address of the up stream neighbor station in
the ring (NAUN)."
::= { ibmOSAExpTRPortEntry 19 }
ibmOsaExpTRRingState OBJECT-TYPE
SYNTAX INTEGER {
opened (1),
closed (2),
opening (3),
closing (4),
openFailure (5),
ringFailure (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current interface state with respect
to entering or leaving the ring."
::= { ibmOSAExpTRPortEntry 20 }
ibmOsaExpTRRingOpenStatus OBJECT-TYPE
SYNTAX INTEGER {
noOpen (1),
badParameter (2),
lobeFailed (3),
signalLoss (4),
insertionTimeout (5),
ringFailed (6),
beaconing (7),
duplicateMAC (8),
requestFailed (9),
removeReceived (10),
open (11),
sARecFrameNotEqualNAUNs (12),
claimTokenRec (13),
ringPurgeFramRec (14),
activeMonPresRec (15),
standbyMonPresRec (16),
accessProtocolDenied (17),
fDXInsDeniedDACfailOnOpen (18),
fDXInsDeniedDACfailOnBeaconTest (19),
beaconBeforeOpen (20),
insertTimerExpDuringDAC (21),
insertTimerExpDuringBeaconTest (22),
lobeMedizTestFailure (23),
heartbeatFailBeforeOpenCompleted (24),
heartbeatFailDuringBeaconTest (25),
recBeaconFrameWithInvalidSA (26)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the success, or the reason for failure
of the station's most recent attempt to enter the ring."
::= { ibmOSAExpTRPortEntry 21 }
ibmOsaExpTRPacketsTransmitted OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the count of the total number of packets
transmitted from this port since the OSA port was reset"
::= { ibmOSAExpTRPortEntry 22 }
ibmOsaExpTRPacketsReceived OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the count of the total number of
packets received by this port since the OSA port was reset"
::= { ibmOSAExpTRPortEntry 23 }
ibmOsaExpTRLineErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a frame or token is
copied or repeated by a station, the E bit is zero in the
frame or token and one of the following conditions exists:
1) there is a non-data bit (J or K bit) between the SD
and the ED of the frame or token, or
2) there is an FCS error in the frame."
::= { ibmOSAExpTRPortEntry 24 }
ibmOsaExpTRBurstErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station detects the
absence of transitions for five half-bit timers
(burst-five error)."
::= { ibmOSAExpTRPortEntry 25 }
ibmOsaExpTRACErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station
receives an AMP or SMP frame in which A is
equal to C is equal to 0, and then receives
another SMP frame with A is equal to C is
equal to 0 without first receiving an AMP
frame. It denotes a station that cannot set
the AC bits properly."
::= { ibmOSAExpTRPortEntry 26 }
ibmOsaExpTRAbortTransErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station
transmits an abort delimiter while transmitting."
::= { ibmOSAExpTRPortEntry 27 }
ibmOsaExpTRInternalErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station
recognizes an internal error."
::= { ibmOSAExpTRPortEntry 28 }
ibmOsaExpTRLostFrameErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station is transmitting
and its TRR timer expires. This condition denotes a condition
transmitting station in strip mode does not receive the
trailer of the frame TRR timer goes off."
::= { ibmOSAExpTRPortEntry 29 }
ibmOsaExpTRRcvCongestionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station
recognizes a frame addressed to its specific address, but
has no available buffer space indicating that the station
is congested."
::= { ibmOSAExpTRPortEntry 30 }
ibmOsaExpTRFrameCopyErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station recognizes a
frame addressed to its specific address and detects that the
FS field A bits are set to 1 indicating a possible line hit
or duplicate address."
::= { ibmOSAExpTRPortEntry 31 }
ibmOsaExpTRTokenErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a station acting as the
active monitor recognizes an error condition that needs a
token transmitted."
::= { ibmOSAExpTRPortEntry 32 }
ibmOsaExpTRFullDuplexErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error has been detected by the FDX protocol"
::= { ibmOSAExpTRPortEntry 33 }
ibmOsaExpTRSoftErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Soft Errors the interface
has detected. It directly corresponds to
the number of Report Error MAC frames
that this interface has transmitted.
Soft Errors are those which are
recoverable by the MAC layer protocols."
::= { ibmOSAExpTRPortEntry 34 }
ibmOsaExpTRHardErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this interface has
detected an immediately recoverable
fatal error. It denotes the number of
times this interface is either
transmitting or receiving beacon MAC frames."
::= { ibmOSAExpTRPortEntry 35 }
ibmOsaExpTRSignalLossErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this interface has
detected the loss of signal condition from the ring."
::= { ibmOSAExpTRPortEntry 36 }
ibmOsaExpTRTransmitBeaconCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this interface has
transmitted a beacon frame."
::= { ibmOSAExpTRPortEntry 37 }
ibmOsaExpTRRecoveryCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Claim Token MAC frames received or
transmitted after the interface has received a frame Ring
Ring Purge MAC counter signifies the number of times the
ring has been purged and is being recovered back into a
normal operating state."
::= { ibmOSAExpTRPortEntry 38 }
ibmOsaExpTRLobeWireFaultCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the interface has
detected an open or short circuit in the
lobe data path. The adapter will be closed
and ibmOsaExpTRRingState will signify this condition."
::= { ibmOSAExpTRPortEntry 39 }
ibmOsaExpTRRemoveReceivedCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the interface has received a Remove
Ring Station MAC frame request. When this frame is
received the interface will enter the closed state and
ibmOsaExpTRRingState will signify this condition."
::= { ibmOSAExpTRPortEntry 40 }
ibmOsaExpTRSingleStationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the interface has
sensed that it is the only station on the
ring. This will happen if the interface
is the first one up on a ring, or if
there is a hardware problem."
::= { ibmOSAExpTRPortEntry 41 }
-- ibmOSAExpATMPortTable
ibmOSAExpATMPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmOSAExpATMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the data associated with an emulated
Ethernet port on an OSA-Express ATM feature.
There are a maximum of 2 logical ports on each ATM feature,
however, each port is shown as though it exists independently
with each having an entry in the ibmOSAExpChannelTable."
::= { ibmOSAMibObjects 7 }
ibmOSAExpATMPortEntry OBJECT-TYPE
SYNTAX IbmOSAExpATMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single entry in the ibmOSAExpATMPortTable.
Indexed by the ifIndex of the corresponding Device interface."
INDEX { ifIndex }
::= { ibmOSAExpATMPortTable 1 }
IbmOSAExpATMPortEntry ::=
SEQUENCE
{
ibmOsaExpATMPortNumber Integer32,
ibmOsaExpATMPortType INTEGER,
ibmOsaExpATMLanTrafficState INTEGER,
ibmOsaExpATMServiceMode INTEGER,
ibmOsaExpATMDisabledStatus BITS,
ibmOsaExpATMConfigName DisplayString,
ibmOsaExpATMMacAddrActive OCTET STRING,
ibmOsaExpATMMacAddrBurntIn OCTET STRING,
ibmOsaExpATMUserData DisplayString,
ibmOsaExpATMPortName DisplayString,
ibmOsaExpATMGroupMacAddrTable OCTET STRING,
ibmOsaExpATMIBMEnhancedMode INTEGER,
ibmOsaExpATMBestEffortPeakRate Integer32,
ibmOsaExpATMConfigMode INTEGER,
ibmOsaExpATMConfigLanType INTEGER,
ibmOsaExpATMActualLanType INTEGER,
ibmOsaExpATMConfigMaxDataFrmSz INTEGER,
ibmOsaExpATMActualMaxDataFrmSz INTEGER,
ibmOsaExpATMConfigELANName DisplayString,
ibmOsaExpATMActualELANName DisplayString,
ibmOsaExpATMConfigLESATMAddress OCTET STRING,
ibmOsaExpATMActualLESATMAddress OCTET STRING,
ibmOsaExpATMControlTimeout Integer32,
ibmOsaExpATMMaxUnknownFrameCount Integer32,
ibmOsaExpATMMaxUnknownFrameTime Integer32,
ibmOsaExpATMVCCTimeoutPeriod Integer32,
ibmOsaExpATMMaxRetryCount Counter32,
ibmOsaExpATMAgingTime Integer32,
ibmOsaExpATMForwardDelayTime Integer32,
ibmOsaExpATMExpectedARPRespTime Integer32,
ibmOsaExpATMFlushTimeout Integer32,
ibmOsaExpATMPathSwitchingDelay Integer32,
ibmOsaExpATMLocalSegmentID Integer32,
ibmOsaExpATMMltcstSendVCCType INTEGER,
ibmOsaExpATMMltcstSendVCCAvgRate Integer32,
ibmOsaExpATMMcastSendVCCPeakRate Integer32,
ibmOsaExpATMConnectCompleteTimer Integer32,
ibmOsaExpATMClientATMAddress OCTET STRING,
ibmOsaExpATMClientIdentifier Integer32,
ibmOsaExpATMClientCurrentState INTEGER,
ibmOsaExpATMLastFailureRespCode INTEGER,
ibmOsaExpATMLastFailureState INTEGER,
ibmOsaExpATMProtocol Integer32,
ibmOsaExpATMLeVersion Integer32,
ibmOsaExpATMTopologyChange INTEGER,
ibmOsaExpATMConfigServerATMAddr OCTET STRING,
ibmOsaExpATMConfigSource INTEGER,
ibmOsaExpATMProxyClient INTEGER,
ibmOsaExpATMLePDUOctetsInbound Counter64,
ibmOsaExpATMNonErrLePDUDiscIn Counter32,
ibmOsaExpATMErrLePDUDiscIn Counter32,
ibmOsaExpATMLePDUOctetsOutbound Counter64,
ibmOsaExpATMNonErrLePDUDiscOut Counter32,
ibmOsaExpATMErrLePDUDiscOut Counter32,
ibmOsaExpATMLeARPRequestsOut Counter32,
ibmOsaExpATMLeARPRequestsIn Counter32,
ibmOsaExpATMLeARPRepliesOut Counter32,
ibmOsaExpATMLeARPRepliesIn Counter32,
ibmOsaExpATMControlFramesOut Counter32,
ibmOsaExpATMControlFramesIn Counter32,
ibmOsaExpATMSVCFailures Counter32,
ibmOsaExpATMConfigDirectIntfc Integer32,
ibmOsaExpATMConfigDirectVPI Integer32,
ibmOsaExpATMConfigDirectVCI Integer32,
ibmOsaExpATMControlDirectIntfc Integer32,
ibmOsaExpATMControlDirectVPI Integer32,
ibmOsaExpATMControlDirectVCI Integer32,
ibmOsaExpATMControlDistIntfc Integer32,
ibmOsaExpATMControlDistributeVPI Integer32,
ibmOsaExpATMControlDistributeVCI Integer32,
ibmOsaExpATMMulticastSendIntfc Integer32,
ibmOsaExpATMMulticastSendVPI Integer32,
ibmOsaExpATMMulticastSendVCI Integer32,
ibmOsaExpATMMulticastFwdIntfc Integer32,
ibmOsaExpATMMulticastForwardVPI Integer32,
ibmOsaExpATMMulticastForwardVCI Integer32
}
ibmOsaExpATMPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port number of this port"
::= { ibmOSAExpATMPortEntry 1 }
ibmOsaExpATMPortType OBJECT-TYPE
SYNTAX INTEGER {
emulatedEthernet (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port type."
::= { ibmOSAExpATMPortEntry 2 }
ibmOsaExpATMLanTrafficState OBJECT-TYPE
SYNTAX INTEGER
{
undefined(0),
unavailable(1),
enabling(2),
disabling(3),
enabled(4),
disabled(5),
linkMonitor(6),
definitionError(7),
configuredOffline(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN state value ranges from 0 to 8. A value of 5,
disabled is further explained in object
ibmOsaExpATMDisabledStatus."
::= { ibmOSAExpATMPortEntry 3 }
ibmOsaExpATMServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
notInServiceMode (0),
inServiceMode (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the processor is in service mode
or not."
::= { ibmOSAExpATMPortEntry 4 }
ibmOsaExpATMDisabledStatus OBJECT-TYPE
SYNTAX BITS
{
reserved0 (0),
internalPortFailure (1),
reserved2 (2),
reserved3 (3),
reserved4 (4),
reserved5 (5),
portTemporarilyDisabled (6),
reserved7 (7),
reserved8 (8),
serviceProcessorRequest (9),
networkRequest (10),
osasfRequest (11),
configurationChange (12),
linkFailureThresholdExceeded (13),
reserved14 (14),
reserved15 (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the value of ibmOsaExpATMLanTrafficState is NOT
disabled, the value of this object will be zero.
When the value of ibmOsaExpATMLanTrafficState is
disabled(5), this object explains the reason for the
disabled state. The value for this object may be a
combination of the bits shown."
::= { ibmOSAExpATMPortEntry 5 }
ibmOsaExpATMConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..34))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the name of the configuration that is on the OSA.
It is set using OSA/SF. It is not used by OSA"
::= { ibmOSAExpATMPortEntry 6 }
ibmOsaExpATMMacAddrActive OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6 byte OCTET STRING which contains the current
MAC address in use on the OSA.
The values are in canonical format."
::= { ibmOSAExpATMPortEntry 7 }
ibmOsaExpATMMacAddrBurntIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6 byte OCTET STRING which contains the burned in
MAC address on the OSA.
The values are in canonical format."
::= { ibmOSAExpATMPortEntry 8 }
ibmOsaExpATMUserData OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Data set by the user. It is ignored by the OSA."
::= { ibmOSAExpATMPortEntry 9 }
ibmOsaExpATMPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the port as used by TCP/IP"
::= { ibmOSAExpATMPortEntry 12 }
ibmOsaExpATMGroupMacAddrTable OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the active Group Addresses.
An individual Group Address is 6 bytes long with an
additional 2 bytes of padding."
::= { ibmOSAExpATMPortEntry 13 }
ibmOsaExpATMIBMEnhancedMode OBJECT-TYPE
SYNTAX INTEGER {
no (0),
yes (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When set to Yes, this keeps data connections active
when the connection to the LES is lost."
::= { ibmOSAExpATMPortEntry 14 }
ibmOsaExpATMBestEffortPeakRate OBJECT-TYPE
SYNTAX Integer32
UNITS "Megabytes per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Values range from 10-1550 and must be divided by 10 to
get the proper value. A value of 1550 indicates 155.0
Mbytes/sec"
::= { ibmOSAExpATMPortEntry 15 }
ibmOsaExpATMConfigMode OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
manual (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this LAN Emulation Client should
auto-configure the next time it is (re)started. In
automatic (1) mode, a client uses a LAN Emulation
Configuration Server to learn the ATM address of its
LAN Emulation Server, and to obtain other parameters.
lecConfig (LanType, MaxDataFrameSize, LanName) are
used in the configure request.
ibmOsaExpATMConfigLESATMAddress is ignored.
In manual (2) mode, management tells the
client the ATM address of its LAN Emulation Server
and the value of the other parmeters. lecConfig
(LanType, MaxDataFrameSize, LanName) are used in the
Join request. ibmOsaExpATMConfigLESATMAddress
tells the client which LES to call."
::= { ibmOSAExpATMPortEntry 16 }
ibmOsaExpATMConfigLanType OBJECT-TYPE
SYNTAX INTEGER {
emulatedEthernet (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port type that the user configured the port for"
::= { ibmOSAExpATMPortEntry 17 }
ibmOsaExpATMActualLanType OBJECT-TYPE
SYNTAX INTEGER {
emulatedEthernet (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual logical port type the port is running in"
::= { ibmOSAExpATMPortEntry 18 }
ibmOsaExpATMConfigMaxDataFrmSz OBJECT-TYPE
SYNTAX INTEGER {
unspecified (1),
f1516 (2),
f4544 (3),
f9234 (4),
f18190 (5)
}
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum data frame size (in bytes) which this
client will use the next time it returns to the Initial
State. Auto-configuring clients use this parameter in
their configure requests. Manually configured clients use
it in their join requests."
::= { ibmOSAExpATMPortEntry 19 }
ibmOsaExpATMActualMaxDataFrmSz OBJECT-TYPE
SYNTAX INTEGER {
unspecified (1),
f1516 (2),
f4544 (3),
f9234 (4),
f18190 (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum data frame size (in bytes) which this
client will use the next time it returns to the Initial
State. Auto-configuring clients use this parameter in
their configure requests. Manually configured clients use
it in their join requests."
::= { ibmOSAExpATMPortEntry 20 }
ibmOsaExpATMConfigELANName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..36))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ELAN Name this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in
their configure requests. Manually configured
clients use it in their join requests."
::= { ibmOSAExpATMPortEntry 21 }
ibmOsaExpATMActualELANName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..36))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ELAN Name this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in
their configure requests. Manually configured
clients use it in their join requests."
::= { ibmOSAExpATMPortEntry 22 }
ibmOsaExpATMConfigLESATMAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN Emulation Server which this client will use the
next time it is started in manual configuration mode.
When ibmOsaExpATMConfigMode is 'automatic', there is no
need to set this address, Address) and no advantage to
doing so. The client will use the LECS to find a LES,
putting the auto-configured address in
ibmOsaExpATMActualLESATMAddress while leaving
ibmOsaExpATMConfigLESATMAddress alone.
Corresponds to Initial State Parameter C9.
In LAN Emulation MIB, the OCTET STRING has length 0 or 20.
For OSA, the length shall be 20, with the value 0
defined to mean that ibmOsaExpATMConfigMode is 'automatic'."
::= { ibmOSAExpATMPortEntry 23 }
ibmOsaExpATMActualLESATMAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN Emulation Server which this client will use the
next time it is started in manual configuration mode.
When lecConfigMode is 'automatic', there is no need to set
this address, Address) and no advantage to doing so. The
client will use the LECS to find a LES, putting the
auto-configured address in ibmOsaExpATMActualLESATMAddress
while leaving ibmOsaExpATMConfigLESATMAddress alone.
Corresponds to Initial State Parameter C9.
In LAN Emulation MIB, the OCTET STRING has length 0 or 20.
For OSA, the length shall be 20, with the value 0 defined
to mean that ibmOsaExpATMConfigMode is 'automatic'."
::= { ibmOSAExpATMPortEntry 24 }
ibmOsaExpATMControlTimeout OBJECT-TYPE
SYNTAX Integer32 (10..300)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Control Time-out. Time out period used for timing out most
request/response control frame interactions, as specified
elsewhere in the LAN Emulation specification.
This time value is expressed in seconds. Corresponds to
Initial State Parameter C7."
::= { ibmOSAExpATMPortEntry 25 }
ibmOsaExpATMMaxUnknownFrameCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Unknown Frame Count. See the description of
ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to
Initial State Parameter C10."
::= { ibmOSAExpATMPortEntry 26 }
ibmOsaExpATMMaxUnknownFrameTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Unknown Frame Time. Within the period of time
defined by the Maximum Unknown Frame Time, a LE Client
will send no more than Maximum Unknown Frame Count
frames to the BUS for a given unicast LAN Destination,
and it must also initiate the address resolution
protocol to resolve that LAN Destination. This time value
is expressed in seconds. Corresponds to Initial State
Parameter C11."
::= { ibmOSAExpATMPortEntry 27 }
ibmOsaExpATMVCCTimeoutPeriod OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VCC Time-out Period. A LE Client SHOULD release any
Data Direct VCC that it has not used to transmit
or receive any data frames for the length of the VCC
Time-out Period. This parameter is only meaningful for
SVC Data Direct VCCs.
This time value is expressed in seconds. The default
value is 20 minutes. A value of 0 seconds means
that the timeout period is infinite.
Negative values will be rejected by the agent.
Corresponds to Initial State Parameter C12."
::= { ibmOSAExpATMPortEntry 28 }
ibmOsaExpATMMaxRetryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Retry Count. A LE CLient MUST not retry a
LE_ARP_REQUEST for a given frame's LAN destination
more than Maximum Retry Count times, after the first
LE_ARP_REQUEST for that same frame's LAN destination.
Corresponds to Initial State Parameter C13."
::= { ibmOSAExpATMPortEntry 29 }
ibmOsaExpATMAgingTime OBJECT-TYPE
SYNTAX Integer32 (10..300)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aging Time. The maximum time that a LE Client will
maintain an entry in its LE_ARP cache in the absence
of a verification of that relationship.
This time value is expressed in seconds. Corresponds to
Initial State Parameter C17."
::= { ibmOSAExpATMPortEntry 30 }
ibmOsaExpATMForwardDelayTime OBJECT-TYPE
SYNTAX Integer32 (4..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay Time. The maximum time that a LE Client
will maintain an entry for a non-local MAC address in
its LE_ARP cache in the absence of a verification of
that relationship, as long as the Topology Change flag
C19 is true. ibmOsaExpATMForwardDelayTime SHOULD BE
less than ibmOsaExpATMAgingTIme. When it is not,
ibmOsaExpATMAgingTime governs LE_ARP aging.
This time value is expressed in seconds. Corresponds to
Initial State Parameter C18."
::= { ibmOSAExpATMPortEntry 31 }
ibmOsaExpATMExpectedARPRespTime OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Expected LE_ARP Reponse Time. The maximum time that
the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE
cycle to take. Used for retries and verifies. This
time value is expressed in seconds.
Corresponds to Initial State Parameter C20."
::= { ibmOSAExpATMPortEntry 32 }
ibmOsaExpATMFlushTimeout OBJECT-TYPE
SYNTAX Integer32 (1..4)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flush Time-out. Time limit to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been
sent before taking recovery action. This time value
is expressed in seconds. Corresponds to Initial State
Parameter C21."
::= { ibmOSAExpATMPortEntry 33 }
ibmOsaExpATMPathSwitchingDelay OBJECT-TYPE
SYNTAX Integer32 (1..8)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path Switching Delay. The time since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol. This time value is
expressed in seconds. Corresponds to Initial State
Parameter C22."
::= { ibmOSAExpATMPortEntry 34 }
ibmOsaExpATMLocalSegmentID OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local Segment ID. The segment ID of the emulated LAN.
This is only required for IEEE 802.5 clients that
are Source Routing bridges. Corresponds to Initial
State Parameter C23."
::= { ibmOSAExpATMPortEntry 35 }
ibmOsaExpATMMltcstSendVCCType OBJECT-TYPE
SYNTAX INTEGER {
bestEffort(1),
variableBitRate(2),
constantBitRate(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Send VCC Type. Signalling parameter that
SHOULD be used by the LE Client when establishing
the Multicast Send VCC. This is the method to be used
by the LE Client when specifying traffic parameters
when it sets up the Multicast Send VCC for this
emulated LAN. Corresponds to Initial State
Parameter C24."
::= { ibmOSAExpATMPortEntry 36 }
ibmOsaExpATMMltcstSendVCCAvgRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when estabishing
the Multicast Send VCC. Forward and Backward Sustained
Cell Rate to be requested by LE Client when setting
up Multicast Send VCC, if using Variable bit rate
codings. Corresponds to Initial State Parameter C25."
::= { ibmOSAExpATMPortEntry 37 }
ibmOsaExpATMMcastSendVCCPeakRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Send VCC PeakRate. Signalling parameter that
SHOULD be used by the LE Client when establishing the
Multicast Send VCC. Forward and Backward Peak Cell
Rate to be requested by LE Client when setting up the
Multicast Send VCC when using either Variable or
Constant bit rate codings. Corresponds to Initial
State Parameter C26."
::= { ibmOSAExpATMPortEntry 38 }
ibmOsaExpATMConnectCompleteTimer OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connection Complete Timer. Optional. In Connection
Establish ment this is the time period in which
data or a READY_IND message is expected from a Calling
Party. This time value is expressed in seconds.
Corresponds to Initial State Parameter C28."
::= { ibmOSAExpATMPortEntry 39 }
ibmOsaExpATMClientATMAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LE Client's ATM Addresses. The primary ATM address
of this LAN Emulation Client. This address is used
to establish the Control Direct and Multicast Send
VCCs, and may also be used to set up Data Direct
VCCs. A client may have additional ATM addresses
for use with Data Direct VCCs.
Corresponds to Initial State Parameter C1."
::= { ibmOSAExpATMPortEntry 40 }
ibmOsaExpATMClientIdentifier OBJECT-TYPE
SYNTAX Integer32 (0..65279)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be used
for echo suppression on multicast data frames sent
by that LE Client. This value MUST NOT change without
terminating the LE Client and returning to the Initial
state. A valid LECID MUST be in the range X'0001'
through X'FEFF'. The value of this object is only
meaningful for a LEC that is connected to a LES. For
a LEC which does not belong to an emulated LAN, the
value of this object is defined to be 0. Corresponds to
Initial State Parameter C14."
::= { ibmOSAExpATMPortEntry 41 }
ibmOsaExpATMClientCurrentState OBJECT-TYPE
SYNTAX INTEGER {
initialState (1),
lecsConnect (2),
configure (3),
join (4),
initialRegistration (5),
busConnect (6),
operational (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the LAN Emulation Client. Note
that 'ifOperStatus' is defined to be 'up' when, and
only when, this field is 'operational'."
::= { ibmOSAExpATMPortEntry 42 }
ibmOsaExpATMLastFailureRespCode OBJECT-TYPE
SYNTAX INTEGER {
none (1),
timeout (2),
undefinedError (3),
versionNotSupported (4),
invalidRequestParameters (5),
duplicateLanDestination (6),
duplicateAtmAddress (7),
insufficientResources (8),
accessDenied (9),
invalidRequesterId (10),
invalidLanDestination (11),
invalidAtmAddress (12),
noConfiguration (13),
leConfigureError (14),
insufficientInformation (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status code from the last failed Configure response
or Join response. Failed responses are those for which
the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame
contains a non-zero code, or fails to arrive within a
timeout period. If none of this client's requests have
failed, this object has the value 'none'. If the
failed response contained a STATUS code that is not
defined in the LAN Emulation specification, this
object has the value 'undefinedError'. The value
'timeout' is self explanatory. Other failure codes
correspond to those defined in the specification,
although they may have different numeric values."
::= { ibmOSAExpATMPortEntry 43 }
ibmOsaExpATMLastFailureState OBJECT-TYPE
SYNTAX INTEGER {
initialState (1),
lecsConnect (2),
configure (3),
join (4),
initialRegistration (5),
busConnect (6),
operational (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state this client was in when it updated the
'ibmOsaExpATMLastFailureRespCode'.
If 'ibmOsaExpATMLastFailureRespCode'
is 'none', this object has the value initialState(1)."
::= { ibmOSAExpATMPortEntry 44 }
ibmOsaExpATMProtocol OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN Emulation protocol which this client supports,
and specifies in its LE_JOIN_REQUESTs."
::= { ibmOSAExpATMPortEntry 45 }
ibmOsaExpATMLeVersion OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN Emulation protocol version which this client
supports, and specifies in its LE_JOIN_REQUESTs."
::= { ibmOSAExpATMPortEntry 46 }
ibmOsaExpATMTopologyChange OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Topology Change. Boolean indication that the LE Client
is using the Forward Delay Time C18, instead of the
Aging Time C17, to age non-local entries in its LE_ARP
cache C16. For a client which is not connected to the
LES, this object is defined to have the value 'false'.
Corresponds to Initial State Parameter C19."
::= { ibmOSAExpATMPortEntry 47 }
ibmOsaExpATMConfigServerATMAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM address of the LAN Emulation Configuration
Server (if known) or 0 (otherwise). In LAN
Emulation MIB, the OCTET STRING is either 0 length
or 20 octets.
For OSA-ATM, this Address has been
changed to a constant 20 octets, with the value 0
equivalent to the 0 length OCTET STRING."
::= { ibmOSAExpATMPortEntry 48 }
ibmOsaExpATMConfigSource OBJECT-TYPE
SYNTAX INTEGER {
gotAddressViaIlmi(1),
usedWellKnownAddress(2),
usedLecsPvc(3),
didNotUseLecs(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this LAN Emulation Client used the
LAN Emulation Configuration Server, and, if so, what
method it used to establish the Configuration Direct VCC"
::= { ibmOSAExpATMPortEntry 49 }
ibmOsaExpATMProxyClient OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this client is acting as a proxy.
Proxy clients are allowed to represent unregistered
MAC addresses, and receive copies of LE_ARP_REQUEST
frames for such addresses. Corresponds to Initial
State Parameter C4."
::= { ibmOSAExpATMPortEntry 50 }
ibmOsaExpATMLePDUOctetsInbound OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Le PDU Octets received"
::= { ibmOSAExpATMPortEntry 51 }
ibmOsaExpATMNonErrLePDUDiscIn OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Non Error Le PDU Octets received"
::= { ibmOSAExpATMPortEntry 52 }
ibmOsaExpATMErrLePDUDiscIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Errored Le PDU Discards received"
::= { ibmOSAExpATMPortEntry 53 }
ibmOsaExpATMLePDUOctetsOutbound OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Le PDU Discards sent"
::= { ibmOSAExpATMPortEntry 54 }
ibmOsaExpATMNonErrLePDUDiscOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Non Error Le PDU Discards sent"
::= { ibmOSAExpATMPortEntry 55 }
ibmOsaExpATMErrLePDUDiscOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Errored Le PDU Discards sent"
::= { ibmOSAExpATMPortEntry 56 }
ibmOsaExpATMLeARPRequestsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LE ARP Requests sent"
::= { ibmOSAExpATMPortEntry 57 }
ibmOsaExpATMLeARPRequestsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LE ARP Requests received over the LUNI
by this LAN Emulation Client. Requests may arrive
on the Control Direct VCC or on the Control Distribute
VCC, depending upon how the LES is implemented and the
chances it has had for learning. This counter covers
both VCCs."
::= { ibmOSAExpATMPortEntry 58 }
ibmOsaExpATMLeARPRepliesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LE ARP Responses sent over the LUNI
by this LAN Emulation Client."
::= { ibmOSAExpATMPortEntry 59 }
ibmOsaExpATMLeARPRepliesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LE ARP Responses received over the
LUNI by this LAN Emulation Client. This count includes
all such replies, whether solicited or not. Replies
may arrive on the Control Direct VCC or on the
Control Distribute VCC, depending upon how the LES
is implemented. This counter covers both VCCs."
::= { ibmOSAExpATMPortEntry 60 }
ibmOsaExpATMControlFramesOut OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of control packets sent by this
LAN Emulation Client over the LUNI."
::= { ibmOSAExpATMPortEntry 61 }
ibmOsaExpATMControlFramesIn OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of control packets received by this
LAN Emulation Client over the LUNI."
::= { ibmOSAExpATMPortEntry 62 }
ibmOsaExpATMSVCFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outgoing LAN Emulation SVCs
which this client tried, but failed, to open;
incoming LAN Emulation SVCs which this client tried,
but failed to establish; and incoming LAN Emulation
SVCs which this client rejected for protocol or
security reasons."
::= { ibmOSAExpATMPortEntry 63 }
ibmOsaExpATMConfigDirectIntfc OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface associated with the Configuration
Direct VCC. If no Configuration Direct VCC exists,
this object has the value 0. Otherwise, the objects
( ibmOsaExpATMConfigDirectIntfc,
ibmOsaExpATMConfigDirectVPI,
ibmOsaExpATMConfigDirectVCI) identify the circuit."
::= { ibmOSAExpATMPortEntry 64 }
ibmOsaExpATMConfigDirectVPI OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Configuration Direct VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 65 }
ibmOsaExpATMConfigDirectVCI OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Configuration Direct VCC exists, this
object contains the VCI which identifies that
VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 66 }
ibmOsaExpATMControlDirectIntfc OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface associated with the Control Direct
VCC. If no Control Direct VCC exists, this object
has the value 0. Otherwise, the objects
( ibmOsaExpATMConfigDirectIntfc,
ibmOsaExpATMConfigDirectVPI,
ibmOsaExpATMConfigDirectVCI) identify the circuit."
::= { ibmOSAExpATMPortEntry 67 }
ibmOsaExpATMControlDirectVPI OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Control Direct VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 68 }
ibmOsaExpATMControlDirectVCI OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Control Direct VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 69 }
ibmOsaExpATMControlDistIntfc OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface associated with the Control Distribute
VCC. If no Control Distribute VCC has been set up to
this client, this object has the value 0. Otherwise,
the objects ( ibmOsaExpATMControlDistIntfc,
ibmOsaExpATMControlDistributeVPI.
ibmOsaExpATMControlDistributeVCI) identify the circuit."
::= { ibmOSAExpATMPortEntry 70 }
ibmOsaExpATMControlDistributeVPI OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Control Distribute VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 71 }
ibmOsaExpATMControlDistributeVCI OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Control Distribute VCC exists, this object
contains the VCI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object contains the value 0."
::= { ibmOSAExpATMPortEntry 72 }
ibmOsaExpATMMulticastSendIntfc OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface associated with the Multicast Send
VCC. If no Multicast Send VCC exists, this object
has the value 0. Otherwise, the objects
( ibmOsaExpATMMulticastSendIntfc,
ibmOsaExpATMMulticastSendVPI,
ibmOsaExpATMMulticastSendVCI) identify the circuit."
::= { ibmOSAExpATMPortEntry 73 }
ibmOsaExpATMMulticastSendVPI OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Multicast Send VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 74 }
ibmOsaExpATMMulticastSendVCI OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Multicast Send VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 75 }
ibmOsaExpATMMulticastFwdIntfc OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface associated with the Multicast
Forward VCC. If no Multicast Forward VCC has
been set up to this client, this object has the
value 0. Otherwise, the objects
( ibmOsaExpATMMulticastFwdIntfc,
ibmOsaExpATMMulticastForwardVPI,
ibmOsaExpATMMulticastForwardVCI) identify the circuit."
::= { ibmOSAExpATMPortEntry 76 }
ibmOsaExpATMMulticastForwardVPI OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Multicast Forward VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 77 }
ibmOsaExpATMMulticastForwardVCI OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Multicast Forward VCC exists, this object
contains the VCI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0."
::= { ibmOSAExpATMPortEntry 78 }
-- Conformance information
-- Compliance statements
--===================================================================
ibmOSAMibCompliances OBJECT
IDENTIFIER ::= { ibmOSAMibConformance 1 }
ibmOSAMibGroups OBJECT
IDENTIFIER ::= { ibmOSAMibConformance 2 }
--===================================================================
-- Compliance statements
--===================================================================
ibmOSAMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the OSA DIrect SNMP product."
MODULE -- this module
MANDATORY-GROUPS {
ibmOSAExpChannelGroup,
ibmOSAExpPerfGroup,
ibmOSAExpPEGroup
}
GROUP ibmOSAExpEthGroup
DESCRIPTION
"The objects in this group are required for Gigabit or
Fast Ethernet features."
GROUP ibmOSAExpTRGroup
DESCRIPTION
"The objects in this group are required for OSA-Express
Token Ring features."
GROUP ibmOSAExpATMGroup
DESCRIPTION
"The objects in this group are required for OSA-Express
ATM LAN Emulation features."
::= { ibmOSAMibCompliances 1 }
--===================================================================
-- MIB groupings
--===================================================================
ibmOSAExpChannelGroup OBJECT-GROUP
OBJECTS {
ibmOSAExpChannelNumber,
ibmOSAExpChannelType,
ibmOSAExpChannelHdwLevel,
ibmOSAExpChannelSubType,
ibmOSAExpChannelShared,
ibmOSAExpChannelNodeDesc,
ibmOSAExpChannelProcCodeLevel,
ibmOSAExpChannelPCIBusUtil1Min,
ibmOSAExpChannelProcUtil1Min,
ibmOSAExpChannelPCIBusUtil5Min,
ibmOSAExpChannelProcUtil5Min,
ibmOSAExpChannelPCIBusUtilHour,
ibmOSAExpChannelProcUtilHour
}
STATUS current
DESCRIPTION
"This group comprises those objects that are related
to OSA-Express Channel support."
::= { ibmOSAMibGroups 1 }
ibmOSAExpPerfGroup OBJECT-GROUP
OBJECTS {
ibmOSAExpPerfDataLP0 ,
ibmOSAExpPerfDataLP1 ,
ibmOSAExpPerfDataLP2 ,
ibmOSAExpPerfDataLP3 ,
ibmOSAExpPerfDataLP4 ,
ibmOSAExpPerfDataLP5 ,
ibmOSAExpPerfDataLP6 ,
ibmOSAExpPerfDataLP7 ,
ibmOSAExpPerfDataLP8 ,
ibmOSAExpPerfDataLP9 ,
ibmOSAExpPerfDataLP10 ,
ibmOSAExpPerfDataLP11 ,
ibmOSAExpPerfDataLP12 ,
ibmOSAExpPerfDataLP13 ,
ibmOSAExpPerfDataLP14 ,
ibmOSAExpPerfDataLP15
}
STATUS current
DESCRIPTION
"This group comprises those objects that are related
to OSA-Express Performance data support."
::= { ibmOSAMibGroups 2 }
ibmOSAExpPEGroup OBJECT-GROUP
OBJECTS {
ibmOSAExpPEMaxSizeArpCache ,
ibmOSAExpPEArpPendingEntries ,
ibmOSAExpPEArpActiveEntries ,
ibmOSAExpPEIPEntries ,
ibmOSAExpPEMulticastEntries ,
ibmOSAExpPEMulticastData
}
STATUS current
DESCRIPTION
"This group comprises those objects that are related
to OSA-Express PE data support."
::= { ibmOSAMibGroups 3 }
ibmOSAExpEthGroup OBJECT-GROUP
OBJECTS {
ibmOsaExpEthPortNumber ,
ibmOsaExpEthPortType ,
ibmOsaExpEthLanTrafficState ,
ibmOsaExpEthServiceMode ,
ibmOsaExpEthDisabledStatus ,
ibmOsaExpEthConfigName ,
ibmOsaExpEthConfigSpeedMode ,
ibmOsaExpEthActiveSpeedMode ,
ibmOsaExpEthMacAddrActive ,
ibmOsaExpEthMacAddrBurntIn ,
ibmOsaExpEthUserData ,
ibmOsaExpEthOutPackets ,
ibmOsaExpEthInPackets ,
ibmOsaExpEthInGroupFrames ,
ibmOsaExpEthInBroadcastFrames ,
ibmOsaExpEthPortName ,
ibmOsaExpEthInUnknownIPFrames ,
ibmOsaExpEthGroupAddrTable
}
STATUS current
DESCRIPTION
"This group comprises those objects that are related
to OSA-Express Fast Ethernet and Gigabit features only"
::= { ibmOSAMibGroups 4 }
ibmOSAExpTRGroup OBJECT-GROUP
OBJECTS {
ibmOsaExpTRPortNumber ,
ibmOsaExpTRPortType ,
ibmOsaExpTRLanTrafficState ,
ibmOsaExpTRServiceMode ,
ibmOsaExpTRDisabledStatus ,
ibmOsaExpTRConfigName ,
ibmOsaExpTRMacAddrActive ,
ibmOsaExpTRMacAddrBurntIn ,
ibmOsaExpTRConfigSpeedMode ,
ibmOsaExpTRActiveSpeedMode ,
ibmOsaExpTRUserData ,
ibmOsaExpTRPortName ,
ibmOsaExpTRGroupAddrTable ,
ibmOsaExpTRFunctionalAddr ,
ibmOsaExpTRRingStatus ,
ibmOsaExpTRAllowAccessPriority ,
ibmOsaExpTREarlyTokenRelease ,
ibmOsaExpTRBeaconingAddress ,
ibmOsaExpTRUpstreamNeighbor ,
ibmOsaExpTRRingState ,
ibmOsaExpTRRingOpenStatus ,
ibmOsaExpTRPacketsTransmitted ,
ibmOsaExpTRPacketsReceived ,
ibmOsaExpTRLineErrorCount ,
ibmOsaExpTRBurstErrorCount ,
ibmOsaExpTRACErrorCount ,
ibmOsaExpTRAbortTransErrorCount ,
ibmOsaExpTRInternalErrorCount ,
ibmOsaExpTRLostFrameErrorCount ,
ibmOsaExpTRRcvCongestionCount ,
ibmOsaExpTRFrameCopyErrorCount ,
ibmOsaExpTRTokenErrorCount ,
ibmOsaExpTRFullDuplexErrorCount ,
ibmOsaExpTRSoftErrorCount ,
ibmOsaExpTRHardErrorCount ,
ibmOsaExpTRSignalLossErrorCount ,
ibmOsaExpTRTransmitBeaconCount ,
ibmOsaExpTRRecoveryCounter ,
ibmOsaExpTRLobeWireFaultCount ,
ibmOsaExpTRRemoveReceivedCount ,
ibmOsaExpTRSingleStationCount
}
STATUS current
DESCRIPTION
"This group comprises those objects that are related
to OSA-Express Token Ring feature only"
::= { ibmOSAMibGroups 5 }
ibmOSAExpATMGroup OBJECT-GROUP
OBJECTS {
ibmOsaExpATMPortNumber ,
ibmOsaExpATMPortType ,
ibmOsaExpATMLanTrafficState ,
ibmOsaExpATMServiceMode ,
ibmOsaExpATMDisabledStatus ,
ibmOsaExpATMConfigName ,
ibmOsaExpATMMacAddrActive ,
ibmOsaExpATMMacAddrBurntIn ,
ibmOsaExpATMUserData ,
ibmOsaExpATMPortName ,
ibmOsaExpATMGroupMacAddrTable ,
ibmOsaExpATMIBMEnhancedMode ,
ibmOsaExpATMBestEffortPeakRate ,
ibmOsaExpATMConfigMode ,
ibmOsaExpATMConfigLanType ,
ibmOsaExpATMActualLanType ,
ibmOsaExpATMConfigMaxDataFrmSz ,
ibmOsaExpATMActualMaxDataFrmSz ,
ibmOsaExpATMConfigELANName ,
ibmOsaExpATMActualELANName ,
ibmOsaExpATMConfigLESATMAddress ,
ibmOsaExpATMActualLESATMAddress ,
ibmOsaExpATMControlTimeout ,
ibmOsaExpATMMaxUnknownFrameCount ,
ibmOsaExpATMMaxUnknownFrameTime ,
ibmOsaExpATMVCCTimeoutPeriod ,
ibmOsaExpATMMaxRetryCount ,
ibmOsaExpATMAgingTime ,
ibmOsaExpATMForwardDelayTime ,
ibmOsaExpATMExpectedARPRespTime ,
ibmOsaExpATMFlushTimeout ,
ibmOsaExpATMPathSwitchingDelay ,
ibmOsaExpATMLocalSegmentID ,
ibmOsaExpATMMltcstSendVCCType ,
ibmOsaExpATMMltcstSendVCCAvgRate ,
ibmOsaExpATMMcastSendVCCPeakRate ,
ibmOsaExpATMConnectCompleteTimer ,
ibmOsaExpATMClientATMAddress ,
ibmOsaExpATMClientIdentifier ,
ibmOsaExpATMClientCurrentState ,
ibmOsaExpATMLastFailureRespCode ,
ibmOsaExpATMLastFailureState ,
ibmOsaExpATMProtocol ,
ibmOsaExpATMLeVersion ,
ibmOsaExpATMTopologyChange ,
ibmOsaExpATMConfigServerATMAddr ,
ibmOsaExpATMConfigSource ,
ibmOsaExpATMProxyClient ,
ibmOsaExpATMLePDUOctetsInbound ,
ibmOsaExpATMNonErrLePDUDiscIn ,
ibmOsaExpATMErrLePDUDiscIn ,
ibmOsaExpATMLePDUOctetsOutbound ,
ibmOsaExpATMNonErrLePDUDiscOut ,
ibmOsaExpATMErrLePDUDiscOut ,
ibmOsaExpATMLeARPRequestsOut ,
ibmOsaExpATMLeARPRequestsIn ,
ibmOsaExpATMLeARPRepliesOut ,
ibmOsaExpATMLeARPRepliesIn ,
ibmOsaExpATMControlFramesOut ,
ibmOsaExpATMControlFramesIn ,
ibmOsaExpATMSVCFailures ,
ibmOsaExpATMConfigDirectIntfc ,
ibmOsaExpATMConfigDirectVPI ,
ibmOsaExpATMConfigDirectVCI ,
ibmOsaExpATMControlDirectIntfc ,
ibmOsaExpATMControlDirectVPI ,
ibmOsaExpATMControlDirectVCI ,
ibmOsaExpATMControlDistIntfc ,
ibmOsaExpATMControlDistributeVPI ,
ibmOsaExpATMControlDistributeVCI ,
ibmOsaExpATMMulticastSendIntfc ,
ibmOsaExpATMMulticastSendVPI ,
ibmOsaExpATMMulticastSendVCI ,
ibmOsaExpATMMulticastFwdIntfc ,
ibmOsaExpATMMulticastForwardVPI ,
ibmOsaExpATMMulticastForwardVCI
}
STATUS current
DESCRIPTION
"This group comprises those objects that are related
to OSA-Express ATM LAN Emulation feature only"
::= { ibmOSAMibGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink