mibs/MIBS/ibm/IBMBNA-MIB
2023-12-05 12:25:34 +01:00

503 lines
17 KiB
Plaintext

IBMBNA-MIB DEFINITIONS ::= BEGIN
-- IMPORTS
-- MODULE-IDENTITY, enterprises, Unsigned32, OBJECT-TYPE
-- FROM SNMPv2-SMI
-- OBJECT-GROUP, MODULE-COMPLIANCE
-- FROM SNMPv2-CONF
-- DisplayString, TruthValue
-- FROM SNMPv2-TC;
IMPORTS
enterprises, Gauge
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB;
-- ibmBna MODULE-IDENTITY
-- LAST-UPDATED "9612161600Z"
-- ORGANIZATION "IBM"
-- CONTACT-INFO "Bob Moore (remoore @ ralvm6)
-- IBM Corporation
-- 800 Park Offices Drive
-- BJNA/664
-- P.O. Box 12195
-- Research Triangle Park, NC 27709, USA
-- Tel: 1 919 254 4436
-- E-mail: remoore@ralvm6.vnet.ibm.com"
--
-- DESCRIPTION
-- "This MIB has two conformance groups providing complementary
-- functions:
--
-- - The ibmBnaLocalTgConfGroup allows an APPN node that
-- implements the APPN Branch Network Architecture to
-- identify its uplinks and downlinks, and to distinguish
-- between downlinks that go to end nodes and those that go
-- to cascaded branch network nodes.
--
-- - The ibmBnaTopoConfGroup allows an APPN network node to
-- relay two pieces of information from the shared network
-- topology database for its topology subnet:
--
-- - which network nodes in the subnet support branch
-- awareness;
-- - for TGs owned by network nodes with branch
-- awareness, which of them are branch TGs and which
-- ones are not.
--
-- In addition, the ibmBnaDirConfGroup provides an object for
-- reporting APPN directory information related to an LU situated
-- below a node that implements the APPN Branch Network
-- Architecture."
--
-- ::= { ibmArchitecture 21 }
--
-- Added to satisfy textual conventions used in the MIB
-- From RFC1903
TruthValue ::=
INTEGER { true(1), false(2) } --@V9057
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
ibmBna OBJECT IDENTIFIER ::= { ibmArchitecture 21 }
ibmBnaObjects OBJECT IDENTIFIER ::= { ibmBna 1 }
ibmBnaConformance OBJECT IDENTIFIER ::= { ibmBna 2 }
-- ******************************************************************
-- IBM Branch Network Architecture Local TG Table
-- ******************************************************************
ibmBnaLocalTgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBnaLocalTgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that identify the branch uplinks and
downlinks for an APPN node implementing the APPN Branch Network
Architecture. This table is effectively an extension to the
appnLocalTgTable defined in the APPN MIB (RFC nnnn).
If an implementation that supports the architecture has its
branch network node support disabled, then this table is empty.
Conversely, if a Management Station determines that there are
entries present in this table, then by implication the agent
where the table resides currently has its branch network node
functionality enabled."
::= { ibmBnaObjects 1 }
ibmBnaLocalTgEntry OBJECT-TYPE
SYNTAX IbmBnaLocalTgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is indexed by the destination CP name and the TG
number."
INDEX { ibmBnaLocalTgDest,
ibmBnaLocalTgNum}
::= { ibmBnaLocalTgTable 1 }
IbmBnaLocalTgEntry ::= SEQUENCE
{
ibmBnaLocalTgDest DisplayString,
ibmBnaLocalTgNum INTEGER,
ibmBnaLocalTgLinkType INTEGER
}
ibmBnaLocalTgDest OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively assigned name of the destination node for
this TG. This is the fully qualified name of a network node,
end node, LEN node, or virtual routing node."
::= { ibmBnaLocalTgEntry 1 }
ibmBnaLocalTgNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number associated with this transmission group."
::= { ibmBnaLocalTgEntry 2 }
ibmBnaLocalTgLinkType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
uplink(2),
downlink(3),
downlinkToBranchNetworkNode(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Branch link type of this TG:
other(1) = the agent has determined the TG's
branch link type to be a value other
than branch uplink or branch
downlink. This is the value used
for a connection network TG owned by
a node that implements the APPN
Branch Network Architecture.
uplink(2) = the TG is a branch uplink.
downlink(3) = the TG is a branch downlink to an
end node.
downlinkToBranchNetworkNode(4) = the TG is a branch
downlink to a cascaded branch
network node.
unknown(255) = the agent cannot determine the
branch link type of the TG."
::= { ibmBnaLocalTgEntry 3 }
-- ******************************************************************
-- IBM Branch Network Architecture Network Node Topology Table
-- ******************************************************************
ibmBnaNnTopologyFRTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBnaNnTopologyFREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that identify which of the network nodes in
an APPN topology subnet support branch awareness. This table
is effectively an extension to the appnNnTopologyFRTable
defined in the APPN MIB (RFC nnnn)."
::= { ibmBnaObjects 2 }
ibmBnaNnTopologyFREntry OBJECT-TYPE
SYNTAX IbmBnaNnTopologyFREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is indexed by FRSN and by fully qualified node
name."
INDEX { ibmBnaNnNodeFRFrsn,
ibmBnaNnNodeFRName }
::= { ibmBnaNnTopologyFRTable 1 }
IbmBnaNnTopologyFREntry ::= SEQUENCE
{
ibmBnaNnNodeFRFrsn Gauge,
ibmBnaNnNodeFRName DisplayString,
ibmBnaNnNodeFRBranchAwareness TruthValue
}
ibmBnaNnNodeFRFrsn OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Flow reduction sequence numbers (FRSNs) are associated with
Topology Database Updates (TDUs) and are unique only within
each APPN network node. A TDU can be associated with multiple
APPN resources. This FRSN indicates the last relative time
this resource was updated at the agent node."
::= { ibmBnaNnTopologyFREntry 1 }
ibmBnaNnNodeFRName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively assigned network name that is locally defined
at each network node in the format NetId.CpName."
::= { ibmBnaNnTopologyFREntry 2 }
ibmBnaNnNodeFRBranchAwareness OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this node supports branch awareness.
This object corresponds to cv4580, byte 8, bit 4."
::= { ibmBnaNnTopologyFREntry 3 }
-- ******************************************************************
-- IBM Branch Network Architecture Network TG Topology Table
-- ******************************************************************
ibmBnaNnTgTopologyFRTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBnaNnTgTopologyFREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that identify which of the TGs owned by
network nodes in an APPN topology subnet are branch TGs.
This table is effectively an extension to the
appnNnTgTopologyFRTable defined in the APPN MIB (RFC nnnn)."
::= { ibmBnaObjects 3 }
ibmBnaNnTgTopologyFREntry OBJECT-TYPE
SYNTAX IbmBnaNnTgTopologyFREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is indexed by four columns: FRSN, TG owner fully
qualified node name, TG destination fully qualified node name,
and TG number."
INDEX
{ibmBnaNnTgFRFrsn,
ibmBnaNnTgFROwner,
ibmBnaNnTgFRDest,
ibmBnaNnTgFRNum}
::= { ibmBnaNnTgTopologyFRTable 1 }
IbmBnaNnTgTopologyFREntry ::= SEQUENCE {
ibmBnaNnTgFRFrsn Gauge,
ibmBnaNnTgFROwner DisplayString,
ibmBnaNnTgFRDest DisplayString,
ibmBnaNnTgFRNum INTEGER,
ibmBnaNnTgFRBranchTg TruthValue
}
ibmBnaNnTgFRFrsn OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Flow reduction sequence numbers (FRSNs) are associated with
Topology Database Updates (TDUs) and are unique only within
each APPN network node. A TDU can be associated with multiple
APPN resources. This FRSN indicates the last time this
resource was updated at this node."
::= { ibmBnaNnTgTopologyFREntry 1 }
ibmBnaNnTgFROwner OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively assigned name for the originating node for
this TG. The format is NetId.CpName and is the same name
specified in the node table."
::= { ibmBnaNnTgTopologyFREntry 2 }
ibmBnaNnTgFRDest OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively assigned fully qualified network name for the
destination node for this TG."
::= { ibmBnaNnTgTopologyFREntry 3 }
ibmBnaNnTgFRNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number associated with this transmission group. Range is
0-255."
::= { ibmBnaNnTgTopologyFREntry 4 }
ibmBnaNnTgFRBranchTg OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the transmission group is a branch TG
(equivalently, whether the destination of the transmission
group is a node supporting the APPN Branch Network
Architecture).
This object corresponds to cv4680, byte m+1, bit 1."
::= { ibmBnaNnTgTopologyFREntry 5 }
-- ******************************************************************
-- IBM Branch Network Architecture APPN Node Directory Table
-- ******************************************************************
ibmBnaDirTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBnaDirEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that identify the apparent owning control
point for an LU below a node that supports the APPN Branch
Network Architecture.
This table is effectively an extension to the appnDirTable
defined in the APPN MIB (RFC nnnn)."
::= { ibmBnaObjects 4 }
ibmBnaDirEntry OBJECT-TYPE
SYNTAX IbmBnaDirEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is indexed by the LU name."
INDEX { ibmBnaDirLuName }
::= { ibmBnaDirTable 1 }
IbmBnaDirEntry ::= SEQUENCE {
ibmBnaDirLuName DisplayString,
ibmBnaDirApparentLuOwnerName DisplayString
}
ibmBnaDirLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fully qualified network LU name in the domain of the
serving network node. Entries take one of three forms:
- Explicit entries do not contain the character '*'.
- Partial wildcard entries have the form 'ccc*', where
'c' represents a character in a legal SNA LuName.
- A full wildcard entry consists of the single
character '*'."
::= { ibmBnaDirEntry 1 }
ibmBnaDirApparentLuOwnerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0 | 3..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fully qualified CP name of the node at which the LU appears to
be located. This object and the appnDirLuOwnerName object in
the APPN MIB are related as follows:
Implementations that support this object save in their
directory database information about an LU's owning control
point that was communicated in two control vectors:
- an Associated Resource Entry (X'3C') CV with resource
type X'00F4' (ENCP)
- a Real Owning Control Point (X'4A') CV.
The X'4A' CV is created by a branch network node to preserve
the name of the real owning control point for an LU below the
branch network node, before it overwrites this name with its
own name in the X'3C' CV. The X'4A' CV is not present for LUs
that are not below branch network nodes.
If the information a node has about an LU's owning CP came only
in a X'3C' CV, then the name from the X'3C' is returned in the
appnDirLuOwnerName object, and a null string is returned in
this object.
If the information a node has about an LU's owning CP came in
both X'3C' and X'4A' CVs, then the name from the X'4A' is
returned in the appnDirLuOwnerName object, and the name from
the X'3C' (which will be the branch network node's name) is
returned in this object."
::= { ibmBnaDirEntry 2 }
-- ******************************************************************
-- IBM Branch Network Architecture conformance
-- ******************************************************************
ibmBnaCompliances OBJECT IDENTIFIER ::= {ibmBnaConformance 1 }
ibmBnaConfGroups OBJECT IDENTIFIER ::= {ibmBnaConformance 2 }
-- ibmBnaCompliance MODULE-COMPLIANCE
-- STATUS mandatory
-- DESCRIPTION
-- "The compliance statement for the SNMPv2 entities that
-- implement the IBM Branch Network Architecture MIB."
-- MODULE this module
-- Conditionally mandatory groups
-- GROUP ibmBnaLocalTgConfGroup
-- DESCRIPTION
-- "The ibmBnaLocalTgConfGroup is mandatory for nodes that
-- support the APPN Branch Network Architecture."
-- GROUP ibmBnaTopoConfGroup
-- DESCRIPTION
-- "The ibmBnaTopoConfGroup is mandatory for APPN network
-- nodes."
-- GROUP ibmBnaDirConfGroup
-- DESCRIPTION
-- "The ibmBnaDirConfGroup is mandatory for APPN network
-- nodes and for nodes that support the APPN Branch Network
-- Architecture."
-- ::= { ibmBnaCompliances 1 }
-- ibmBnaLocalTgConfGroup OBJECT-GROUP
-- OBJECTS {
-- ibmBnaLocalTgLinkType
-- }
-- STATUS mandatory
-- DESCRIPTION
-- "An object used to identify the branch link type for
-- each of the TGs owned by a node that implements the APPN
-- Branch Network Architecture."
-- ::= { ibmBnaConfGroups 1 }
-- ibmBnaTopoConfGroup OBJECT-GROUP
-- OBJECTS {
-- ibmBnaNnNodeFRBranchAwareness,
-- ibmBnaNnTgFRBranchTg
-- }
-- STATUS current
-- DESCRIPTION
-- "This conformance group contains two objects
-- representing information in the APPN topology database
-- related to the APPN Branch Network Architecture."
-- ::= { ibmBnaConfGroups 2 }
-- ibmBnaDirConfGroup OBJECT-GROUP
-- OBJECTS {
-- ibmBnaDirApparentLuOwnerName
-- }
-- STATUS current
-- DESCRIPTION
-- "This conformance group contains one object representing
-- information in the APPN directory related to LUs
-- situated below nodes implementing the APPN Branch
-- Network Architecture."
--
-- ::= { ibmBnaConfGroups 3 }
END